diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/net/mediatek-net.txt | 7 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt | 18 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt | 22 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/rtc/s3c-rtc.txt | 7 | ||||
| -rw-r--r-- | Documentation/input/event-codes.txt | 4 | ||||
| -rw-r--r-- | Documentation/kernel-parameters.txt | 2 | ||||
| -rw-r--r-- | Documentation/usb/gadget_multi.txt | 2 |
7 files changed, 41 insertions, 21 deletions
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt index 5ca79290eabf..32eaaca04d9b 100644 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -9,7 +9,8 @@ have dual GMAC each represented by a child node.. Required properties: - compatible: Should be "mediatek,mt7623-eth" - reg: Address and length of the register set for the device -- interrupts: Should contain the frame engines interrupt +- interrupts: Should contain the three frame engines interrupts in numeric + order. These are fe_int0, fe_int1 and fe_int2. - clocks: the clock used by the core - clock-names: the names of the clock listed in the clocks property. These are "ethif", "esw", "gp2", "gp1" @@ -42,7 +43,9 @@ eth: ethernet@1b100000 { <ðsys CLK_ETHSYS_GP2>, <ðsys CLK_ETHSYS_GP1>; clock-names = "ethif", "esw", "gp2", "gp1"; - interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW + GIC_SPI 199 IRQ_TYPE_LEVEL_LOW + GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; resets = <ðsys MT2701_ETHSYS_ETH_RST>; reset-names = "eth"; diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt index 50c4f9b00adf..e3b4809fbe82 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt @@ -8,15 +8,19 @@ Required properties: of memory mapped region. - clock-names: from common clock binding: Required elements: "24m" -- rockchip,grf: phandle to the syscon managing the "general register files" - #phy-cells : from the generic PHY bindings, must be 0; Example: -edp_phy: edp-phy { - compatible = "rockchip,rk3288-dp-phy"; - rockchip,grf = <&grf>; - clocks = <&cru SCLK_EDP_24M>; - clock-names = "24m"; - #phy-cells = <0>; +grf: syscon@ff770000 { + compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd"; + +... + + edp_phy: edp-phy { + compatible = "rockchip,rk3288-dp-phy"; + clocks = <&cru SCLK_EDP_24M>; + clock-names = "24m"; + #phy-cells = <0>; + }; }; diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt index 61916f15a949..555cb0f40690 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt @@ -3,17 +3,23 @@ Rockchip EMMC PHY Required properties: - compatible: rockchip,rk3399-emmc-phy - - rockchip,grf : phandle to the syscon managing the "general - register files" - #phy-cells: must be 0 - - reg: PHY configure reg address offset in "general + - reg: PHY register address offset and length in "general register files" Example: -emmcphy: phy { - compatible = "rockchip,rk3399-emmc-phy"; - rockchip,grf = <&grf>; - reg = <0xf780>; - #phy-cells = <0>; + +grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + +... + + emmcphy: phy@f780 { + compatible = "rockchip,rk3399-emmc-phy"; + reg = <0xf780 0x20>; + #phy-cells = <0>; + }; }; diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt index 1068ffce9f91..fdde63a5419c 100644 --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt @@ -15,9 +15,10 @@ Required properties: is the rtc tick interrupt. The number of cells representing a interrupt depends on the parent interrupt controller. - clocks: Must contain a list of phandle and clock specifier for the rtc - and source clocks. -- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the - same order as the clocks property. + clock and in the case of a s3c6410 compatible controller, also + a source clock. +- clock-names: Must contain "rtc" and for a s3c6410 compatible controller, + a "rtc_src" sorted in the same order as the clocks property. Example: diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt index 3f0f5ce3338b..36ea940e5bb9 100644 --- a/Documentation/input/event-codes.txt +++ b/Documentation/input/event-codes.txt @@ -173,6 +173,10 @@ A few EV_ABS codes have special meanings: proximity of the device and while the value of the BTN_TOUCH code is 0. If the input device may be used freely in three dimensions, consider ABS_Z instead. + - BTN_TOOL_<name> should be set to 1 when the tool comes into detectable + proximity and set to 0 when the tool leaves detectable proximity. + BTN_TOOL_<name> signals the type of tool that is currently detected by the + hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH. * ABS_MT_<name>: - Used to describe multitouch input events. Please see diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index ecc74fa4bfde..0b3de80ec8f6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -4077,6 +4077,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. sector if the number is odd); i = IGNORE_DEVICE (don't bind to this device); + j = NO_REPORT_LUNS (don't use report luns + command, uas only); l = NOT_LOCKABLE (don't try to lock and unlock ejectable media); m = MAX_SECTORS_64 (don't transfer more diff --git a/Documentation/usb/gadget_multi.txt b/Documentation/usb/gadget_multi.txt index 7d66a8636cb5..5faf514047e9 100644 --- a/Documentation/usb/gadget_multi.txt +++ b/Documentation/usb/gadget_multi.txt @@ -43,7 +43,7 @@ For the gadget two work under Windows two conditions have to be met: First of all, Windows need to detect the gadget as an USB composite gadget which on its own have some conditions[4]. If they are met, Windows lets USB Generic Parent Driver[5] handle the device which then -tries to much drivers for each individual interface (sort of, don't +tries to match drivers for each individual interface (sort of, don't get into too many details). The good news is: you do not have to worry about most of the |