diff options
Diffstat (limited to 'arch/arm/boot/dts/exynos5440.dtsi')
-rw-r--r-- | arch/arm/boot/dts/exynos5440.dtsi | 72 |
1 files changed, 43 insertions, 29 deletions
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index e6bffd13cedd..2a2e570bbee6 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -10,6 +10,8 @@ */ #include <dt-bindings/clock/exynos5440.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> / { compatible = "samsung,exynos5440", "samsung,exynos5"; @@ -41,7 +43,8 @@ <0x2E2000 0x1000>, <0x2E4000 0x2000>, <0x2E6000 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; cpus { @@ -72,26 +75,26 @@ arm-pmu { compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; - interrupts = <0 52 4>, - <0 53 4>, - <0 54 4>, - <0 55 4>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; }; timer { compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; clock-frequency = <50000000>; }; cpufreq@160000 { compatible = "samsung,exynos5440-cpufreq"; reg = <0x160000 0x1000>; - interrupts = <0 57 0>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; operating-points = < /* KHz uV */ 1500000 1100000 @@ -108,7 +111,7 @@ serial_0: serial@B0000 { compatible = "samsung,exynos4210-uart"; reg = <0xB0000 0x1000>; - interrupts = <0 2 0>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; clock-names = "uart", "clk_uart_baud0"; }; @@ -116,7 +119,7 @@ serial_1: serial@C0000 { compatible = "samsung,exynos4210-uart"; reg = <0xC0000 0x1000>; - interrupts = <0 3 0>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; clock-names = "uart", "clk_uart_baud0"; }; @@ -124,7 +127,7 @@ spi_0: spi@D0000 { compatible = "samsung,exynos5440-spi"; reg = <0xD0000 0x100>; - interrupts = <0 4 0>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,spi-src-clk = <0>; @@ -136,8 +139,14 @@ pin_ctrl: pinctrl@E0000 { compatible = "samsung,exynos5440-pinctrl"; reg = <0xE0000 0x1000>; - interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, - <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; #gpio-cells = <2>; @@ -162,7 +171,7 @@ i2c@F0000 { compatible = "samsung,exynos5440-i2c"; reg = <0xF0000 0x1000>; - interrupts = <0 5 0>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_B_125>; @@ -172,7 +181,7 @@ i2c@100000 { compatible = "samsung,exynos5440-i2c"; reg = <0x100000 0x1000>; - interrupts = <0 6 0>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_B_125>; @@ -182,16 +191,16 @@ watchdog@110000 { compatible = "samsung,s3c2410-wdt"; reg = <0x110000 0x1000>; - interrupts = <0 1 0>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "watchdog"; }; gmac: ethernet@00230000 { - compatible = "snps,dwmac-3.70a"; + compatible = "snps,dwmac-3.70a", "snps,dwmac"; reg = <0x00230000 0x8000>; interrupt-parent = <&gic>; - interrupts = <0 31 4>; + interrupts = <GIC_SPI 31 4>; interrupt-names = "macirq"; phy-mode = "sgmii"; clocks = <&clock CLK_GMAC0>; @@ -209,7 +218,8 @@ rtc@130000 { compatible = "samsung,s3c6410-rtc"; reg = <0x130000 0x1000>; - interrupts = <0 17 0>, <0 16 0>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "rtc"; }; @@ -217,7 +227,7 @@ tmuctrl_0: tmuctrl@160118 { compatible = "samsung,exynos5440-tmu"; reg = <0x160118 0x230>, <0x160368 0x10>; - interrupts = <0 58 0>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; #include "exynos5440-tmu-sensor-conf.dtsi" @@ -226,7 +236,7 @@ tmuctrl_1: tmuctrl@16011C { compatible = "samsung,exynos5440-tmu"; reg = <0x16011C 0x230>, <0x160368 0x10>; - interrupts = <0 58 0>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; #include "exynos5440-tmu-sensor-conf.dtsi" @@ -235,7 +245,7 @@ tmuctrl_2: tmuctrl@160120 { compatible = "samsung,exynos5440-tmu"; reg = <0x160120 0x230>, <0x160368 0x10>; - interrupts = <0 58 0>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; #include "exynos5440-tmu-sensor-conf.dtsi" @@ -259,7 +269,7 @@ sata@210000 { compatible = "snps,exynos5440-ahci"; reg = <0x210000 0x10000>; - interrupts = <0 30 0>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SATA>; clock-names = "sata"; }; @@ -267,7 +277,7 @@ ohci@220000 { compatible = "samsung,exynos5440-ohci"; reg = <0x220000 0x1000>; - interrupts = <0 29 0>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB>; clock-names = "usbhost"; }; @@ -275,7 +285,7 @@ ehci@221000 { compatible = "samsung,exynos5440-ehci"; reg = <0x221000 0x1000>; - interrupts = <0 29 0>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB>; clock-names = "usbhost"; }; @@ -285,7 +295,9 @@ reg = <0x290000 0x1000 0x270000 0x1000 0x271000 0x40>; - interrupts = <0 20 0>, <0 21 0>, <0 22 0>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>; clock-names = "pcie", "pcie_bus"; #address-cells = <3>; @@ -306,7 +318,9 @@ reg = <0x2a0000 0x1000 0x272000 0x1000 0x271040 0x40>; - interrupts = <0 23 0>, <0 24 0>, <0 25 0>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>; clock-names = "pcie", "pcie_bus"; #address-cells = <3>; |