summaryrefslogtreecommitdiff
path: root/arch/arm/mach-iop32x/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-iop32x/pci.c')
-rw-r--r--arch/arm/mach-iop32x/pci.c404
1 files changed, 0 insertions, 404 deletions
diff --git a/arch/arm/mach-iop32x/pci.c b/arch/arm/mach-iop32x/pci.c
deleted file mode 100644
index 7a215d2ee7e2..000000000000
--- a/arch/arm/mach-iop32x/pci.c
+++ /dev/null
@@ -1,404 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/pci.c
- *
- * PCI support for the Intel IOP32X and IOP33X processors
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/signal.h>
-#include <asm/mach/pci.h>
-#include "hardware.h"
-#include "iop3xx.h"
-
-// #define DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command. If the
- * bus is on the 803xx then a type0 made, else a type1 is created.
- */
-static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
- struct pci_sys_data *sys = bus->sysdata;
- u32 addr;
-
- if (sys->busnr == bus->number)
- addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
- else
- addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
- addr |= PCI_FUNC(devfn) << 8 | (where & ~3);
-
- return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle. If an error
- * was detected it returns a 1, else it returns a 0. The errors being checked
- * are parity, master abort, target abort (master and target). These types of
- * errors occur during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop3xx_pci_status(void)
-{
- unsigned int status;
- int ret = 0;
-
- /*
- * Check the status registers.
- */
- status = *IOP3XX_ATUSR;
- if (status & 0xf900) {
- DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
- *IOP3XX_ATUSR = status & 0xf900;
- ret = 1;
- }
-
- status = *IOP3XX_ATUISR;
- if (status & 0x679f) {
- DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
- *IOP3XX_ATUISR = status & 0x679f;
- ret = 1;
- }
-
- return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data. Note that the 4 nops ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static u32 iop3xx_read(unsigned long addr)
-{
- u32 val;
-
- __asm__ __volatile__(
- "str %1, [%2]\n\t"
- "ldr %0, [%3]\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- : "=r" (val)
- : "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
-
- return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle. If there was an error, the routine returns all hex f's.
- */
-static int
-iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
- u32 val = iop3xx_read(addr) >> ((where & 3) * 8);
-
- if (iop3xx_pci_status())
- val = 0xffffffff;
-
- *value = val;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
- u32 val;
-
- if (size != 4) {
- val = iop3xx_read(addr);
- if (iop3xx_pci_status())
- return PCIBIOS_SUCCESSFUL;
-
- where = (where & 3) * 8;
-
- if (size == 1)
- val &= ~(0xff << where);
- else
- val &= ~(0xffff << where);
-
- *IOP3XX_OCCDR = val | value << where;
- } else {
- asm volatile(
- "str %1, [%2]\n\t"
- "str %0, [%3]\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- "nop\n\t"
- :
- : "r" (value), "r" (addr),
- "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops iop3xx_ops = {
- .read = iop3xx_read_config,
- .write = iop3xx_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the 80200 gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-static int
-iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
- addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
- /*
- * If it was an imprecise abort, then we need to correct the
- * return address to be _after_ the instruction.
- */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
-
- return 0;
-}
-
-int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
-{
- struct resource *res;
- struct resource realio;
-
- if (nr != 0)
- return 0;
-
- res = kzalloc(sizeof(struct resource), GFP_KERNEL);
- if (!res)
- panic("PCI: unable to alloc resources");
-
- res->start = IOP3XX_PCI_LOWER_MEM_PA;
- res->end = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
- res->name = "IOP3XX PCI Memory Space";
- res->flags = IORESOURCE_MEM;
- request_resource(&iomem_resource, res);
-
- /*
- * Use whatever translation is already setup.
- */
- sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0;
-
- pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
-
- realio.start = 0;
- realio.end = realio.start + SZ_64K - 1;
- pci_remap_iospace(&realio, IOP3XX_PCI_LOWER_IO_PA);
-
- return 1;
-}
-
-void __init iop3xx_atu_setup(void)
-{
- /* BAR 0 ( Disabled ) */
- *IOP3XX_IAUBAR0 = 0x0;
- *IOP3XX_IABAR0 = 0x0;
- *IOP3XX_IATVR0 = 0x0;
- *IOP3XX_IALR0 = 0x0;
-
- /* BAR 1 ( Disabled ) */
- *IOP3XX_IAUBAR1 = 0x0;
- *IOP3XX_IABAR1 = 0x0;
- *IOP3XX_IALR1 = 0x0;
-
- /* BAR 2 (1:1 mapping with Physical RAM) */
- /* Set limit and enable */
- *IOP3XX_IALR2 = ~((u32)IOP3XX_MAX_RAM_SIZE - 1) & ~0x1;
- *IOP3XX_IAUBAR2 = 0x0;
-
- /* Align the inbound bar with the base of memory */
- *IOP3XX_IABAR2 = PHYS_OFFSET |
- PCI_BASE_ADDRESS_MEM_TYPE_64 |
- PCI_BASE_ADDRESS_MEM_PREFETCH;
-
- *IOP3XX_IATVR2 = PHYS_OFFSET;
-
- /* Outbound window 0 */
- *IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_BA;
- *IOP3XX_OUMWTVR0 = 0;
-
- /* Outbound window 1 */
- *IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
- IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
- *IOP3XX_OUMWTVR1 = 0;
-
- /* BAR 3 ( Disabled ) */
- *IOP3XX_IAUBAR3 = 0x0;
- *IOP3XX_IABAR3 = 0x0;
- *IOP3XX_IATVR3 = 0x0;
- *IOP3XX_IALR3 = 0x0;
-
- /* Setup the I/O Bar
- */
- *IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_BA;
-
- /* Enable inbound and outbound cycles
- */
- *IOP3XX_ATUCMD |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
- PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- *IOP3XX_ATUCR |= IOP3XX_ATUCR_OUT_EN;
-}
-
-void __init iop3xx_atu_disable(void)
-{
- *IOP3XX_ATUCMD = 0;
- *IOP3XX_ATUCR = 0;
-
- /* wait for cycles to quiesce */
- while (*IOP3XX_PCSR & (IOP3XX_PCSR_OUT_Q_BUSY |
- IOP3XX_PCSR_IN_Q_BUSY))
- cpu_relax();
-
- /* BAR 0 ( Disabled ) */
- *IOP3XX_IAUBAR0 = 0x0;
- *IOP3XX_IABAR0 = 0x0;
- *IOP3XX_IATVR0 = 0x0;
- *IOP3XX_IALR0 = 0x0;
-
- /* BAR 1 ( Disabled ) */
- *IOP3XX_IAUBAR1 = 0x0;
- *IOP3XX_IABAR1 = 0x0;
- *IOP3XX_IALR1 = 0x0;
-
- /* BAR 2 ( Disabled ) */
- *IOP3XX_IAUBAR2 = 0x0;
- *IOP3XX_IABAR2 = 0x0;
- *IOP3XX_IATVR2 = 0x0;
- *IOP3XX_IALR2 = 0x0;
-
- /* BAR 3 ( Disabled ) */
- *IOP3XX_IAUBAR3 = 0x0;
- *IOP3XX_IABAR3 = 0x0;
- *IOP3XX_IATVR3 = 0x0;
- *IOP3XX_IALR3 = 0x0;
-
- /* Clear the outbound windows */
- *IOP3XX_OIOWTVR = 0;
-
- /* Outbound window 0 */
- *IOP3XX_OMWTVR0 = 0;
- *IOP3XX_OUMWTVR0 = 0;
-
- /* Outbound window 1 */
- *IOP3XX_OMWTVR1 = 0;
- *IOP3XX_OUMWTVR1 = 0;
-}
-
-/* Flag to determine whether the ATU is initialized and the PCI bus scanned */
-int init_atu;
-
-int iop3xx_get_init_atu(void) {
- /* check if default has been overridden */
- if (init_atu != IOP3XX_INIT_ATU_DEFAULT)
- return init_atu;
- else
- return IOP3XX_INIT_ATU_DISABLE;
-}
-
-static void __init iop3xx_atu_debug(void)
-{
- DBG("PCI: Intel IOP3xx PCI init.\n");
- DBG("PCI: Outbound memory window 0: PCI 0x%08x%08x\n",
- *IOP3XX_OUMWTVR0, *IOP3XX_OMWTVR0);
- DBG("PCI: Outbound memory window 1: PCI 0x%08x%08x\n",
- *IOP3XX_OUMWTVR1, *IOP3XX_OMWTVR1);
- DBG("PCI: Outbound IO window: PCI 0x%08x\n",
- *IOP3XX_OIOWTVR);
-
- DBG("PCI: Inbound memory window 0: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
- *IOP3XX_IAUBAR0, *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0);
- DBG("PCI: Inbound memory window 1: PCI 0x%08x%08x 0x%08x\n",
- *IOP3XX_IAUBAR1, *IOP3XX_IABAR1, *IOP3XX_IALR1);
- DBG("PCI: Inbound memory window 2: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
- *IOP3XX_IAUBAR2, *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2);
- DBG("PCI: Inbound memory window 3: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
- *IOP3XX_IAUBAR3, *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3);
-
- DBG("PCI: Expansion ROM window: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
- 0, *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR);
-
- DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
- DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
-
- hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort");
-}
-
-/* for platforms that might be host-bus-adapters */
-void __init iop3xx_pci_preinit_cond(void)
-{
- if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) {
- iop3xx_atu_disable();
- iop3xx_atu_setup();
- iop3xx_atu_debug();
- }
-}
-
-void __init iop3xx_pci_preinit(void)
-{
- pcibios_min_mem = 0;
-
- iop3xx_atu_disable();
- iop3xx_atu_setup();
- iop3xx_atu_debug();
-}
-
-/* allow init_atu to be user overridden */
-static int __init iop3xx_init_atu_setup(char *str)
-{
- init_atu = IOP3XX_INIT_ATU_DEFAULT;
- if (str) {
- while (*str != '\0') {
- switch (*str) {
- case 'y':
- case 'Y':
- init_atu = IOP3XX_INIT_ATU_ENABLE;
- break;
- case 'n':
- case 'N':
- init_atu = IOP3XX_INIT_ATU_DISABLE;
- break;
- case ',':
- case '=':
- break;
- default:
- printk(KERN_DEBUG "\"%s\" malformed at "
- "character: \'%c\'",
- __func__,
- *str);
- *(str + 1) = '\0';
- }
- str++;
- }
- }
-
- return 1;
-}
-
-__setup("iop3xx_init_atu", iop3xx_init_atu_setup);
-
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-01-25 12:01:30 +0000