diff options
Diffstat (limited to 'arch/arm64/Kconfig')
| -rw-r--r-- | arch/arm64/Kconfig | 132 |
1 files changed, 85 insertions, 47 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index d81adca1b04d..df350f4e1e7a 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -90,6 +90,7 @@ config ARM64 select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS_BROADCAST select GENERIC_CPU_AUTOPROBE + select GENERIC_CPU_VULNERABILITIES select GENERIC_EARLY_IOREMAP select GENERIC_IDLE_POLL_SETUP select GENERIC_IRQ_MULTI_HANDLER @@ -148,6 +149,7 @@ config ARM64 select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_FUNCTION_ARG_ACCESS_API select HAVE_RCU_TABLE_FREE select HAVE_RSEQ select HAVE_STACKPROTECTOR @@ -293,7 +295,7 @@ menu "Kernel Features" menu "ARM errata workarounds via the alternatives framework" config ARM64_WORKAROUND_CLEAN_CACHE - def_bool n + bool config ARM64_ERRATUM_826319 bool "Cortex-A53: 826319: System might deadlock if a write cannot complete until read data is accepted" @@ -460,26 +462,28 @@ config ARM64_ERRATUM_1024718 bool "Cortex-A55: 1024718: Update of DBM/AP bits without break before make might result in incorrect update" default y help - This option adds work around for Arm Cortex-A55 Erratum 1024718. + This option adds a workaround for ARM Cortex-A55 Erratum 1024718. Affected Cortex-A55 cores (r0p0, r0p1, r1p0) could cause incorrect update of the hardware dirty bit when the DBM/AP bits are updated - without a break-before-make. The work around is to disable the usage + without a break-before-make. The workaround is to disable the usage of hardware DBM locally on the affected cores. CPUs not affected by - erratum will continue to use the feature. + this erratum will continue to use the feature. If unsure, say Y. config ARM64_ERRATUM_1188873 - bool "Cortex-A76: MRC read following MRRC read of specific Generic Timer in AArch32 might give incorrect result" + bool "Cortex-A76/Neoverse-N1: MRC read following MRRC read of specific Generic Timer in AArch32 might give incorrect result" default y + depends on COMPAT select ARM_ARCH_TIMER_OOL_WORKAROUND help - This option adds work arounds for ARM Cortex-A76 erratum 1188873 + This option adds a workaround for ARM Cortex-A76/Neoverse-N1 + erratum 1188873. - Affected Cortex-A76 cores (r0p0, r1p0, r2p0) could cause - register corruption when accessing the timer registers from - AArch32 userspace. + Affected Cortex-A76/Neoverse-N1 cores (r0p0, r1p0, r2p0) could + cause register corruption when accessing the timer registers + from AArch32 userspace. If unsure, say Y. @@ -487,7 +491,7 @@ config ARM64_ERRATUM_1165522 bool "Cortex-A76: Speculative AT instruction using out-of-context translation regime could cause subsequent request to generate an incorrect translation" default y help - This option adds work arounds for ARM Cortex-A76 erratum 1165522 + This option adds a workaround for ARM Cortex-A76 erratum 1165522. Affected Cortex-A76 cores (r0p0, r1p0, r2p0) could end-up with corrupted TLBs by speculating an AT instruction during a guest @@ -500,7 +504,7 @@ config ARM64_ERRATUM_1286807 default y select ARM64_WORKAROUND_REPEAT_TLBI help - This option adds workaround for ARM Cortex-A76 erratum 1286807 + This option adds a workaround for ARM Cortex-A76 erratum 1286807. On the affected Cortex-A76 cores (r0p0 to r3p0), if a virtual address for a cacheable mapping of a location is being @@ -517,10 +521,10 @@ config CAVIUM_ERRATUM_22375 bool "Cavium erratum 22375, 24313" default y help - Enable workaround for erratum 22375, 24313. + Enable workaround for errata 22375 and 24313. This implements two gicv3-its errata workarounds for ThunderX. Both - with small impact affecting only ITS table allocation. + with a small impact affecting only ITS table allocation. erratum 22375: only alloc 8MB table size erratum 24313: ignore memory access type @@ -584,9 +588,6 @@ config QCOM_FALKOR_ERRATUM_1003 config ARM64_WORKAROUND_REPEAT_TLBI bool - help - Enable the repeat TLBI workaround for Falkor erratum 1009 and - Cortex-A76 erratum 1286807. config QCOM_FALKOR_ERRATUM_1009 bool "Falkor E1009: Prematurely complete a DSB after a TLBI" @@ -622,7 +623,7 @@ config HISILICON_ERRATUM_161600802 bool "Hip07 161600802: Erroneous redistributor VLPI base" default y help - The HiSilicon Hip07 SoC usees the wrong redistributor base + The HiSilicon Hip07 SoC uses the wrong redistributor base when issued ITS commands such as VMOVP and VMAPP, and requires a 128kB offset to be applied to the target address in this commands. @@ -642,7 +643,7 @@ config FUJITSU_ERRATUM_010001 bool "Fujitsu-A64FX erratum E#010001: Undefined fault may occur wrongly" default y help - This option adds workaround for Fujitsu-A64FX erratum E#010001. + This option adds a workaround for Fujitsu-A64FX erratum E#010001. On some variants of the Fujitsu-A64FX cores ver(1.0, 1.1), memory accesses may cause undefined fault (Data abort, DFSC=0b111111). This fault occurs under a specific hardware condition when a @@ -653,7 +654,7 @@ config FUJITSU_ERRATUM_010001 case-4 TTBR1_EL2 with TCR_EL2.NFD1 == 1. The workaround is to ensure these bits are clear in TCR_ELx. - The workaround only affect the Fujitsu-A64FX. + The workaround only affects the Fujitsu-A64FX. If unsure, say Y. @@ -885,6 +886,9 @@ config ARCH_WANT_HUGE_PMD_SHARE config ARCH_HAS_CACHE_LINE_SIZE def_bool y +config ARCH_ENABLE_SPLIT_PMD_PTLOCK + def_bool y if PGTABLE_LEVELS > 2 + config SECCOMP bool "Enable seccomp to safely compute untrusted bytecode" ---help--- @@ -1074,9 +1078,65 @@ config RODATA_FULL_DEFAULT_ENABLED This requires the linear region to be mapped down to pages, which may adversely affect performance in some cases. +config ARM64_SW_TTBR0_PAN + bool "Emulate Privileged Access Never using TTBR0_EL1 switching" + help + Enabling this option prevents the kernel from accessing + user-space memory directly by pointing TTBR0_EL1 to a reserved + zeroed area and reserved ASID. The user access routines + restore the valid TTBR0_EL1 temporarily. + +menuconfig COMPAT + bool "Kernel support for 32-bit EL0" + depends on ARM64_4K_PAGES || EXPERT + select COMPAT_BINFMT_ELF if BINFMT_ELF + select HAVE_UID16 + select OLD_SIGSUSPEND3 + select COMPAT_OLD_SIGACTION + help + This option enables support for a 32-bit EL0 running under a 64-bit + kernel at EL1. AArch32-specific components such as system calls, + the user helper functions, VFP support and the ptrace interface are + handled appropriately by the kernel. + + If you use a page size other than 4KB (i.e, 16KB or 64KB), please be aware + that you will only be able to execute AArch32 binaries that were compiled + with page size aligned segments. + + If you want to execute 32-bit userspace applications, say Y. + +if COMPAT + +config KUSER_HELPERS + bool "Enable kuser helpers page for 32 bit applications" + default y + help + Warning: disabling this option may break 32-bit user programs. + + Provide kuser helpers to compat tasks. The kernel provides + helper code to userspace in read only form at a fixed location + to allow userspace to be independent of the CPU type fitted to + the system. This permits binaries to be run on ARMv4 through + to ARMv8 without modification. + + See Documentation/arm/kernel_user_helpers.txt for details. + + However, the fixed address nature of these helpers can be used + by ROP (return orientated programming) authors when creating + exploits. + + If all of the binaries and libraries which run on your platform + are built specifically for your platform, and make no use of + these helpers, then you can turn this option off to hinder + such exploits. However, in that case, if a binary or library + relying on those helpers is run, it will not function correctly. + + Say N here only if you are absolutely certain that you do not + need these helpers; otherwise, the safe option is to say Y. + + menuconfig ARMV8_DEPRECATED bool "Emulate deprecated/obsolete ARMv8 instructions" - depends on COMPAT depends on SYSCTL help Legacy software support may require certain instructions @@ -1142,13 +1202,7 @@ config SETEND_EMULATION If unsure, say Y endif -config ARM64_SW_TTBR0_PAN - bool "Emulate Privileged Access Never using TTBR0_EL1 switching" - help - Enabling this option prevents the kernel from accessing - user-space memory directly by pointing TTBR0_EL1 to a reserved - zeroed area and reserved ASID. The user access routines - restore the valid TTBR0_EL1 temporarily. +endif menu "ARMv8.1 architectural features" @@ -1314,6 +1368,9 @@ config ARM64_SVE To enable use of this extension on CPUs that implement it, say Y. + On CPUs that support the SVE2 extensions, this option will enable + those too. + Note that for architectural reasons, firmware _must_ implement SVE support when running on SVE capable hardware. The required support is present in: @@ -1347,7 +1404,7 @@ config ARM64_PSEUDO_NMI help Adds support for mimicking Non-Maskable Interrupts through the use of GIC interrupt priority. This support requires version 3 or later of - Arm GIC. + ARM GIC. This high priority configuration for interrupts needs to be explicitly enabled by setting the kernel parameter @@ -1471,25 +1528,6 @@ config DMI endmenu -config COMPAT - bool "Kernel support for 32-bit EL0" - depends on ARM64_4K_PAGES || EXPERT - select COMPAT_BINFMT_ELF if BINFMT_ELF - select HAVE_UID16 - select OLD_SIGSUSPEND3 - select COMPAT_OLD_SIGACTION - help - This option enables support for a 32-bit EL0 running under a 64-bit - kernel at EL1. AArch32-specific components such as system calls, - the user helper functions, VFP support and the ptrace interface are - handled appropriately by the kernel. - - If you use a page size other than 4KB (i.e, 16KB or 64KB), please be aware - that you will only be able to execute AArch32 binaries that were compiled - with page size aligned segments. - - If you want to execute 32-bit userspace applications, say Y. - config SYSVIPC_COMPAT def_bool y depends on COMPAT && SYSVIPC |