diff options
Diffstat (limited to 'arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts')
| -rw-r--r-- | arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts | 65 |
1 files changed, 65 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts index 6cb2b7f0c817..019ae09ea0fd 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts @@ -22,6 +22,41 @@ stdout-path = "serial0:115200n8"; }; + i2c { + compatible = "i2c-gpio"; + sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <5>; + #address-cells = <1>; + #size-cells = <0>; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_mclk_pin>; + clocks = <&ccu CLK_CSI_MCLK>; + clock-names = "xclk"; + + AVDD-supply = <®_aldo1>; + DOVDD-supply = <®_dldo3>; + DVDD-supply = <®_eldo3>; + reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* CSI-RST-R: PE14 */ + powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* CSI-STBY-R: PE15 */ + + port { + ov5640_ep: endpoint { + remote-endpoint = <&csi_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; + }; + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rtc 1>; @@ -30,10 +65,40 @@ }; }; +&csi { + status = "okay"; + + port { + csi_ep: endpoint { + remote-endpoint = <&ov5640_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; + &ehci0 { status = "okay"; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + sensor@48 { + compatible = "st,stlm75"; + reg = <0x48>; + }; +}; + +&i2c0_pins { + bias-pull-up; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; |