diff options
Diffstat (limited to 'arch/arm64/boot/dts/apple/t7000.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/apple/t7000.dtsi | 125 |
1 files changed, 125 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/apple/t7000.dtsi b/arch/arm64/boot/dts/apple/t7000.dtsi new file mode 100644 index 000000000000..a7cc29e84c84 --- /dev/null +++ b/arch/arm64/boot/dts/apple/t7000.dtsi @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple T7000 "A8" SoC + * + * Other names: H7P, "Fiji" + * + * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org> + * Based on Asahi Linux's M1 (t8103.dtsi) and Corellium's A10 efforts. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/apple-aic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/apple.h> + +/ { + interrupt-parent = <&aic>; + #address-cells = <2>; + #size-cells = <2>; + + clkref: clock-ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "clkref"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "apple,typhoon"; + reg = <0x0 0x0>; + cpu-release-addr = <0 0>; /* To be filled in by loader */ + enable-method = "spin-table"; + device_type = "cpu"; + }; + + cpu1: cpu@1 { + compatible = "apple,typhoon"; + reg = <0x0 0x1>; + cpu-release-addr = <0 0>; /* To be filled in by loader */ + enable-method = "spin-table"; + device_type = "cpu"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + nonposted-mmio; + ranges; + + serial0: serial@20a0c0000 { + compatible = "apple,s5l-uart"; + reg = <0x2 0x0a0c0000 0x0 0x4000>; + reg-io-width = <4>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 158 IRQ_TYPE_LEVEL_HIGH>; + /* Use the bootloader-enabled clocks for now. */ + clocks = <&clkref>, <&clkref>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial6: serial@20a0d8000 { + compatible = "apple,s5l-uart"; + reg = <0x2 0x0a0d8000 0x0 0x4000>; + reg-io-width = <4>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 164 IRQ_TYPE_LEVEL_HIGH>; + /* Use the bootloader-enabled clocks for now. */ + clocks = <&clkref>, <&clkref>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + wdt: watchdog@20e027000 { + compatible = "apple,t7000-wdt", "apple,wdt"; + reg = <0x2 0x0e027000 0x0 0x1000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>; + }; + + aic: interrupt-controller@20e100000 { + compatible = "apple,t7000-aic", "apple,aic"; + reg = <0x2 0x0e100000 0x0 0x100000>; + #interrupt-cells = <3>; + interrupt-controller; + }; + + pinctrl: pinctrl@20e300000 { + compatible = "apple,t7000-pinctrl", "apple,pinctrl"; + reg = <0x2 0x0e300000 0x0 0x100000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 208>; + apple,npins = <208>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 62 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 63 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 64 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 65 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 66 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 67 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 68 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&aic>; + interrupt-names = "phys", "virt"; + /* Note that A8 doesn't actually have a hypervisor (EL2 is not implemented). */ + interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>, + <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>; + }; +}; |