diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi | 93 |
1 files changed, 93 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index 6f5e63696ec0..0da311898e01 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -43,6 +43,27 @@ enable-active-high; }; + reg_usbotg1: regulator-usbotg1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_otg1>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_camera: regulator-camera { + compatible = "regulator-fixed"; + regulator-name = "mipi_pwr"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100000>; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; regulator-name = "VSD_3V3"; @@ -67,6 +88,10 @@ }; }; +&csi { + status = "okay"; +}; + &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_espi2>; @@ -90,6 +115,30 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x3c>; + clocks = <&clk IMX8MM_CLK_CLKO1>; + clock-names = "xclk"; + assigned-clocks = <&clk IMX8MM_CLK_CLKO1>; + assigned-clock-parents = <&clk IMX8MM_CLK_24M>; + assigned-clock-rates = <24000000>; + AVDD-supply = <®_camera>; /* 2.8v */ + powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + + port { + /* MIPI CSI-2 bus endpoint */ + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&imx8mm_mipi_csi_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; }; &i2c4 { @@ -141,6 +190,18 @@ }; }; +&mipi_csi { + status = "okay"; + ports { + port@0 { + imx8mm_mipi_csi_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + data-lanes = <1 2>; + }; + }; + }; +}; + &sai3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai3>; @@ -169,6 +230,24 @@ status = "okay"; }; +&usbotg1 { + vbus-supply = <®_usbotg1>; + disable-over-current; + dr_mode="otg"; + status = "okay"; +}; + +&usbotg2 { + pinctrl-names = "default"; + disable-over-current; + dr_mode="host"; + status = "okay"; +}; + +&usbphynop2 { + reset-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; @@ -209,12 +288,26 @@ >; }; + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 + MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x59 + >; + }; + pinctrl_pcal6414: pcal6414-gpiogrp { fsl,pins = < MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 >; }; + pinctrl_reg_usb_otg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 + >; + }; + pinctrl_sai3: sai3grp { fsl,pins = < MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 |