diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 84 |
1 files changed, 84 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index 24836b6b9bbc..f2c0b71b5d8e 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -7,6 +7,50 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm8280_1_thermal: pm8280-1-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8280_1_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pm8280_2_thermal: pm8280-2-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8280_2_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pmk8280: pmic@0 { compatible = "qcom,pmk8350", "qcom,spmi-pmic"; @@ -24,6 +68,32 @@ linux,code = <KEY_POWER>; status = "disabled"; }; + + pmk8280_pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + status = "disabled"; + }; + }; + + pmk8280_vadc: adc@3100 { + compatible = "qcom,spmi-adc7"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + status = "disabled"; + }; + + pmk8280_adc_tm: adc-tm@3400 { + compatible = "qcom,spmi-adc-tm5-gen2"; + reg = <0x3400>; + interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #thermal-sensor-cells = <1>; + status = "disabled"; }; }; @@ -33,6 +103,13 @@ #address-cells = <1>; #size-cells = <0>; + pm8280_1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pmc8280_1_gpios: gpio@8800 { compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; reg = <0x8800>; @@ -78,6 +155,13 @@ #address-cells = <1>; #size-cells = <0>; + pm8280_2_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pmc8280_2_gpios: gpio@8800 { compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; reg = <0x8800>; |