4 files changed, 40 insertions, 11 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
index a608a219543e..3e08e2fd0a78 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -387,7 +387,7 @@
 
 	pmic {
 		pmic_int_l: pmic-int-l {
-			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index ccbe3a7a1d2c..d24444cdf54a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -154,6 +154,22 @@
 	};
 };
 
+&gpio3 {
+	/*
+	 * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
+	 * eMMC and SPI flash powered-down initially (in fact it keeps the
+	 * reset signal asserted). BIOS_DISABLE_OVERRIDE pin allows to override
+	 * that signal so that eMMC and SPI can be used regardless of the state
+	 * of the signal.
+	 */
+	bios-disable-override-hog {
+		gpios = <RK_PD5 GPIO_ACTIVE_LOW>;
+		gpio-hog;
+		line-name = "bios_disable_override";
+		output-high;
+	};
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
 	assigned-clock-parents = <&clkin_gmac>;
@@ -409,6 +425,7 @@
 
 &i2s0 {
 	pinctrl-0 = <&i2s0_2ch_bus>;
+	pinctrl-1 = <&i2s0_2ch_bus_bclk_off>;
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
 	status = "okay";
@@ -417,8 +434,8 @@
 /*
  * As Q7 does not specify neither a global nor a RX clock for I2S these
  * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
- * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
- * conflicts.
+ * Therefore we have to redefine the i2s0_2ch_bus and i2s0_2ch_bus_bclk_off
+ * definitions to prevent conflicts.
  */
 &i2s0_2ch_bus {
 	rockchip,pins =
@@ -428,6 +445,14 @@
 		<3 RK_PD7 1 &pcfg_pull_none>;
 };
 
+&i2s0_2ch_bus_bclk_off {
+	rockchip,pins =
+		<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+		<3 RK_PD2 1 &pcfg_pull_none>,
+		<3 RK_PD3 1 &pcfg_pull_none>,
+		<3 RK_PD7 1 &pcfg_pull_none>;
+};
+
 &io_domains {
 	status = "okay";
 	bt656-supply = <&vcc_1v8>;
@@ -449,9 +474,14 @@
 
 &pinctrl {
 	pinctrl-names = "default";
-	pinctrl-0 = <&q7_thermal_pin>;
+	pinctrl-0 = <&q7_thermal_pin &bios_disable_override_hog_pin>;
 
 	gpios {
+		bios_disable_override_hog_pin: bios-disable-override-hog-pin {
+			rockchip,pins =
+				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
 		q7_thermal_pin: q7-thermal-pin {
 			rockchip,pins =
 				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 4690be841a1c..c72b3a608edd 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -1592,10 +1592,9 @@
 			 <&cru SRST_TSADCPHY>;
 		rockchip,grf = <&grf>;
 		rockchip,hw-tshut-temp = <95000>;
-		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&tsadc_pin>;
-		pinctrl-1 = <&tsadc_shutorg>;
-		pinctrl-2 = <&tsadc_pin>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&tsadc_shutorg>;
+		pinctrl-1 = <&tsadc_pin>;
 		#thermal-sensor-cells = <1>;
 		status = "disabled";
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index b6e4df180f0b..ee99166ebd46 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -582,14 +582,14 @@
 	};
 
 	vo0_grf: syscon@fd5a6000 {
-		compatible = "rockchip,rk3588-vo-grf", "syscon";
+		compatible = "rockchip,rk3588-vo0-grf", "syscon";
 		reg = <0x0 0xfd5a6000 0x0 0x2000>;
 		clocks = <&cru PCLK_VO0GRF>;
 	};
 
 	vo1_grf: syscon@fd5a8000 {
-		compatible = "rockchip,rk3588-vo-grf", "syscon";
-		reg = <0x0 0xfd5a8000 0x0 0x100>;
+		compatible = "rockchip,rk3588-vo1-grf", "syscon";
+		reg = <0x0 0xfd5a8000 0x0 0x4000>;
 		clocks = <&cru PCLK_VO1GRF>;
 	};