1 files changed, 0 insertions, 521 deletions

diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
deleted file mode 100644
index 1a338e541334..000000000000
--- a/arch/ia64/hp/sim/simserial.c
+++ /dev/null
@@ -1,521 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Simulated Serial Driver (fake serial)
- *
- * This driver is mostly used for bringup purposes and will go away.
- * It has a strong dependency on the system console. All outputs
- * are rerouted to the same facility as the one used by printk which, in our
- * case means sys_sim.c console (goes via the simulator).
- *
- * Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co
- *	Stephane Eranian <eranian@hpl.hp.com>
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/capability.h>
-#include <linux/circ_buf.h>
-#include <linux/console.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/serial.h>
-#include <linux/sysrq.h>
-#include <linux/uaccess.h>
-
-#include <asm/hpsim.h>
-
-#include "hpsim_ssc.h"
-
-#undef SIMSERIAL_DEBUG	/* define this to get some debug information */
-
-#define KEYBOARD_INTR	3	/* must match with simulator! */
-
-#define NR_PORTS	1	/* only one port for now */
-
-struct serial_state {
-	struct tty_port port;
-	struct circ_buf xmit;
-	int irq;
-	int x_char;
-};
-
-static struct serial_state rs_table[NR_PORTS];
-
-struct tty_driver *hp_simserial_driver;
-
-static struct console *console;
-
-static void receive_chars(struct tty_port *port)
-{
-	unsigned char ch;
-	static unsigned char seen_esc = 0;
-
-	while ( (ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR)) ) {
-		if (ch == 27 && seen_esc == 0) {
-			seen_esc = 1;
-			continue;
-		} else if (seen_esc == 1 && ch == 'O') {
-			seen_esc = 2;
-			continue;
-		} else if (seen_esc == 2) {
-			if (ch == 'P') /* F1 */
-				show_state();
-#ifdef CONFIG_MAGIC_SYSRQ
-			if (ch == 'S') { /* F4 */
-				do {
-					ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR);
-				} while (!ch);
-				handle_sysrq(ch);
-			}
-#endif
-			seen_esc = 0;
-			continue;
-		}
-		seen_esc = 0;
-
-		if (tty_insert_flip_char(port, ch, TTY_NORMAL) == 0)
-			break;
-	}
-	tty_flip_buffer_push(port);
-}
-
-/*
- * This is the serial driver's interrupt routine for a single port
- */
-static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
-{
-	struct serial_state *info = dev_id;
-
-	receive_chars(&info->port);
-
-	return IRQ_HANDLED;
-}
-
-/*
- * -------------------------------------------------------------------
- * Here ends the serial interrupt routines.
- * -------------------------------------------------------------------
- */
-
-static int rs_put_char(struct tty_struct *tty, unsigned char ch)
-{
-	struct serial_state *info = tty->driver_data;
-	unsigned long flags;
-
-	if (!info->xmit.buf)
-		return 0;
-
-	local_irq_save(flags);
-	if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) == 0) {
-		local_irq_restore(flags);
-		return 0;
-	}
-	info->xmit.buf[info->xmit.head] = ch;
-	info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1);
-	local_irq_restore(flags);
-	return 1;
-}
-
-static void transmit_chars(struct tty_struct *tty, struct serial_state *info,
-		int *intr_done)
-{
-	int count;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	if (info->x_char) {
-		char c = info->x_char;
-
-		console->write(console, &c, 1);
-
-		info->x_char = 0;
-
-		goto out;
-	}
-
-	if (info->xmit.head == info->xmit.tail || tty->stopped) {
-#ifdef SIMSERIAL_DEBUG
-		printk("transmit_chars: head=%d, tail=%d, stopped=%d\n",
-		       info->xmit.head, info->xmit.tail, tty->stopped);
-#endif
-		goto out;
-	}
-	/*
-	 * We removed the loop and try to do it in to chunks. We need
-	 * 2 operations maximum because it's a ring buffer.
-	 *
-	 * First from current to tail if possible.
-	 * Then from the beginning of the buffer until necessary
-	 */
-
-	count = min(CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE),
-		    SERIAL_XMIT_SIZE - info->xmit.tail);
-	console->write(console, info->xmit.buf+info->xmit.tail, count);
-
-	info->xmit.tail = (info->xmit.tail+count) & (SERIAL_XMIT_SIZE-1);
-
-	/*
-	 * We have more at the beginning of the buffer
-	 */
-	count = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-	if (count) {
-		console->write(console, info->xmit.buf, count);
-		info->xmit.tail += count;
-	}
-out:
-	local_irq_restore(flags);
-}
-
-static void rs_flush_chars(struct tty_struct *tty)
-{
-	struct serial_state *info = tty->driver_data;
-
-	if (info->xmit.head == info->xmit.tail || tty->stopped ||
-			!info->xmit.buf)
-		return;
-
-	transmit_chars(tty, info, NULL);
-}
-
-static int rs_write(struct tty_struct * tty,
-		    const unsigned char *buf, int count)
-{
-	struct serial_state *info = tty->driver_data;
-	int	c, ret = 0;
-	unsigned long flags;
-
-	if (!info->xmit.buf)
-		return 0;
-
-	local_irq_save(flags);
-	while (1) {
-		c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-		if (count < c)
-			c = count;
-		if (c <= 0) {
-			break;
-		}
-		memcpy(info->xmit.buf + info->xmit.head, buf, c);
-		info->xmit.head = ((info->xmit.head + c) &
-				   (SERIAL_XMIT_SIZE-1));
-		buf += c;
-		count -= c;
-		ret += c;
-	}
-	local_irq_restore(flags);
-	/*
-	 * Hey, we transmit directly from here in our case
-	 */
-	if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) &&
-			!tty->stopped)
-		transmit_chars(tty, info, NULL);
-
-	return ret;
-}
-
-static int rs_write_room(struct tty_struct *tty)
-{
-	struct serial_state *info = tty->driver_data;
-
-	return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-}
-
-static int rs_chars_in_buffer(struct tty_struct *tty)
-{
-	struct serial_state *info = tty->driver_data;
-
-	return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-}
-
-static void rs_flush_buffer(struct tty_struct *tty)
-{
-	struct serial_state *info = tty->driver_data;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	info->xmit.head = info->xmit.tail = 0;
-	local_irq_restore(flags);
-
-	tty_wakeup(tty);
-}
-
-/*
- * This function is used to send a high-priority XON/XOFF character to
- * the device
- */
-static void rs_send_xchar(struct tty_struct *tty, char ch)
-{
-	struct serial_state *info = tty->driver_data;
-
-	info->x_char = ch;
-	if (ch) {
-		/*
-		 * I guess we could call console->write() directly but
-		 * let's do that for now.
-		 */
-		transmit_chars(tty, info, NULL);
-	}
-}
-
-/*
- * ------------------------------------------------------------
- * rs_throttle()
- *
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void rs_throttle(struct tty_struct * tty)
-{
-	if (I_IXOFF(tty))
-		rs_send_xchar(tty, STOP_CHAR(tty));
-
-	printk(KERN_INFO "simrs_throttle called\n");
-}
-
-static void rs_unthrottle(struct tty_struct * tty)
-{
-	struct serial_state *info = tty->driver_data;
-
-	if (I_IXOFF(tty)) {
-		if (info->x_char)
-			info->x_char = 0;
-		else
-			rs_send_xchar(tty, START_CHAR(tty));
-	}
-	printk(KERN_INFO "simrs_unthrottle called\n");
-}
-
-static int rs_setserial(struct tty_struct *tty, struct serial_struct *ss)
-{
-	return 0;
-}
-
-static int rs_getserial(struct tty_struct *tty, struct serial_struct *ss)
-{
-	return 0;
-}
-
-static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
-{
-	if ((cmd != TIOCSERCONFIG) && (cmd != TIOCMIWAIT)) {
-		if (tty_io_error(tty))
-		    return -EIO;
-	}
-
-	switch (cmd) {
-	case TIOCMIWAIT:
-		return 0;
-	case TIOCSERCONFIG:
-	case TIOCSERGETLSR: /* Get line status register */
-		return -EINVAL;
-	}
-	return -ENOIOCTLCMD;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(struct tty_port *port)
-{
-	struct serial_state *info = container_of(port, struct serial_state,
-			port);
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (info->irq)
-		free_irq(info->irq, info);
-
-	if (info->xmit.buf) {
-		free_page((unsigned long) info->xmit.buf);
-		info->xmit.buf = NULL;
-	}
-	local_irq_restore(flags);
-}
-
-static void rs_close(struct tty_struct *tty, struct file * filp)
-{
-	struct serial_state *info = tty->driver_data;
-
-	tty_port_close(&info->port, tty, filp);
-}
-
-static void rs_hangup(struct tty_struct *tty)
-{
-	struct serial_state *info = tty->driver_data;
-
-	rs_flush_buffer(tty);
-	tty_port_hangup(&info->port);
-}
-
-static int activate(struct tty_port *port, struct tty_struct *tty)
-{
-	struct serial_state *state = container_of(port, struct serial_state,
-			port);
-	unsigned long flags, page;
-	int retval = 0;
-
-	page = get_zeroed_page(GFP_KERNEL);
-	if (!page)
-		return -ENOMEM;
-
-	local_irq_save(flags);
-
-	if (state->xmit.buf)
-		free_page(page);
-	else
-		state->xmit.buf = (unsigned char *) page;
-
-	if (state->irq) {
-		retval = request_irq(state->irq, rs_interrupt_single, 0,
-				"simserial", state);
-		if (retval)
-			goto errout;
-	}
-
-	state->xmit.head = state->xmit.tail = 0;
-errout:
-	local_irq_restore(flags);
-	return retval;
-}
-
-
-/*
- * This routine is called whenever a serial port is opened.  It
- * enables interrupts for a serial port, linking in its async structure into
- * the IRQ chain.   It also performs the serial-specific
- * initialization for the tty structure.
- */
-static int rs_open(struct tty_struct *tty, struct file * filp)
-{
-	struct serial_state *info = rs_table + tty->index;
-	struct tty_port *port = &info->port;
-
-	tty->driver_data = info;
-	port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
-	/*
-	 * figure out which console to use (should be one already)
-	 */
-	console = console_drivers;
-	while (console) {
-		if ((console->flags & CON_ENABLED) && console->write) break;
-		console = console->next;
-	}
-
-	return tty_port_open(port, tty, filp);
-}
-
-/*
- * /proc fs routines....
- */
-
-static int rs_proc_show(struct seq_file *m, void *v)
-{
-	int i;
-
-	seq_printf(m, "simserinfo:1.0\n");
-	for (i = 0; i < NR_PORTS; i++)
-		seq_printf(m, "%d: uart:16550 port:3F8 irq:%d\n",
-		       i, rs_table[i].irq);
-	return 0;
-}
-
-static const struct tty_operations hp_ops = {
-	.open = rs_open,
-	.close = rs_close,
-	.write = rs_write,
-	.put_char = rs_put_char,
-	.flush_chars = rs_flush_chars,
-	.write_room = rs_write_room,
-	.chars_in_buffer = rs_chars_in_buffer,
-	.flush_buffer = rs_flush_buffer,
-	.ioctl = rs_ioctl,
-	.throttle = rs_throttle,
-	.unthrottle = rs_unthrottle,
-	.send_xchar = rs_send_xchar,
-	.set_serial = rs_setserial,
-	.get_serial = rs_getserial,
-	.hangup = rs_hangup,
-	.proc_show = rs_proc_show,
-};
-
-static const struct tty_port_operations hp_port_ops = {
-	.activate = activate,
-	.shutdown = shutdown,
-};
-
-static int __init simrs_init(void)
-{
-	struct serial_state *state;
-	int retval;
-
-	if (!ia64_platform_is("hpsim"))
-		return -ENODEV;
-
-	hp_simserial_driver = alloc_tty_driver(NR_PORTS);
-	if (!hp_simserial_driver)
-		return -ENOMEM;
-
-	printk(KERN_INFO "SimSerial driver with no serial options enabled\n");
-
-	/* Initialize the tty_driver structure */
-
-	hp_simserial_driver->driver_name = "simserial";
-	hp_simserial_driver->name = "ttyS";
-	hp_simserial_driver->major = TTY_MAJOR;
-	hp_simserial_driver->minor_start = 64;
-	hp_simserial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	hp_simserial_driver->subtype = SERIAL_TYPE_NORMAL;
-	hp_simserial_driver->init_termios = tty_std_termios;
-	hp_simserial_driver->init_termios.c_cflag =
-		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-	hp_simserial_driver->flags = TTY_DRIVER_REAL_RAW;
-	tty_set_operations(hp_simserial_driver, &hp_ops);
-
-	state = rs_table;
-	tty_port_init(&state->port);
-	state->port.ops = &hp_port_ops;
-	state->port.close_delay = 0; /* XXX really 0? */
-
-	retval = hpsim_get_irq(KEYBOARD_INTR);
-	if (retval < 0) {
-		printk(KERN_ERR "%s: out of interrupt vectors!\n",
-				__func__);
-		goto err_free_tty;
-	}
-
-	state->irq = retval;
-
-	/* the port is imaginary */
-	printk(KERN_INFO "ttyS0 at 0x03f8 (irq = %d) is a 16550\n", state->irq);
-
-	tty_port_link_device(&state->port, hp_simserial_driver, 0);
-	retval = tty_register_driver(hp_simserial_driver);
-	if (retval) {
-		printk(KERN_ERR "Couldn't register simserial driver\n");
-		goto err_free_tty;
-	}
-
-	return 0;
-err_free_tty:
-	put_tty_driver(hp_simserial_driver);
-	tty_port_destroy(&state->port);
-	return retval;
-}
-
-#ifndef MODULE
-__initcall(simrs_init);
-#endif