summaryrefslogtreecommitdiff
path: root/arch/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/include/asm/futex.h27
-rw-r--r--arch/powerpc/include/asm/lppaca.h16
-rw-r--r--arch/powerpc/include/asm/machdep.h6
-rw-r--r--arch/powerpc/include/asm/pci-bridge.h10
-rw-r--r--arch/powerpc/include/asm/prom.h15
-rw-r--r--arch/powerpc/include/asm/rwsem.h51
-rw-r--r--arch/powerpc/kernel/machine_kexec.c5
-rw-r--r--arch/powerpc/kernel/paca.c14
-rw-r--r--arch/powerpc/kernel/pci-common.c1
-rw-r--r--arch/powerpc/kernel/process.c8
-rw-r--r--arch/powerpc/kernel/prom_parse.c84
-rw-r--r--arch/powerpc/kernel/vmlinux.lds.S2
-rw-r--r--arch/powerpc/mm/numa.c3
-rw-r--r--arch/powerpc/mm/tlb_hash64.c6
-rw-r--r--arch/powerpc/platforms/cell/spufs/syscalls.c2
-rw-r--r--arch/powerpc/platforms/iseries/dt.c6
-rw-r--r--arch/powerpc/platforms/iseries/setup.c1
-rw-r--r--arch/powerpc/platforms/pseries/hotplug-memory.c66
18 files changed, 121 insertions, 202 deletions
diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index 7c589ef81fb0..c94e4a3fe2ef 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -30,7 +30,7 @@
: "b" (uaddr), "i" (-EFAULT), "r" (oparg) \
: "cr0", "memory")
-static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+static inline int futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
{
int op = (encoded_op >> 28) & 7;
int cmp = (encoded_op >> 24) & 15;
@@ -40,7 +40,7 @@ static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
oparg = 1 << oparg;
- if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+ if (! access_ok (VERIFY_WRITE, uaddr, sizeof(u32)))
return -EFAULT;
pagefault_disable();
@@ -82,35 +82,38 @@ static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
}
static inline int
-futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+ u32 oldval, u32 newval)
{
- int prev;
+ int ret = 0;
+ u32 prev;
- if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
return -EFAULT;
__asm__ __volatile__ (
PPC_RELEASE_BARRIER
-"1: lwarx %0,0,%2 # futex_atomic_cmpxchg_inatomic\n\
- cmpw 0,%0,%3\n\
+"1: lwarx %1,0,%3 # futex_atomic_cmpxchg_inatomic\n\
+ cmpw 0,%1,%4\n\
bne- 3f\n"
- PPC405_ERR77(0,%2)
-"2: stwcx. %4,0,%2\n\
+ PPC405_ERR77(0,%3)
+"2: stwcx. %5,0,%3\n\
bne- 1b\n"
PPC_ACQUIRE_BARRIER
"3: .section .fixup,\"ax\"\n\
-4: li %0,%5\n\
+4: li %0,%6\n\
b 3b\n\
.previous\n\
.section __ex_table,\"a\"\n\
.align 3\n\
" PPC_LONG "1b,4b,2b,4b\n\
.previous" \
- : "=&r" (prev), "+m" (*uaddr)
+ : "+r" (ret), "=&r" (prev), "+m" (*uaddr)
: "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT)
: "cc", "memory");
- return prev;
+ *uval = prev;
+ return ret;
}
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index 380d48bacd16..26b8c807f8f1 100644
--- a/arch/powerpc/include/asm/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -33,9 +33,25 @@
//
//----------------------------------------------------------------------------
#include <linux/cache.h>
+#include <linux/threads.h>
#include <asm/types.h>
#include <asm/mmu.h>
+/*
+ * We only have to have statically allocated lppaca structs on
+ * legacy iSeries, which supports at most 64 cpus.
+ */
+#ifdef CONFIG_PPC_ISERIES
+#if NR_CPUS < 64
+#define NR_LPPACAS NR_CPUS
+#else
+#define NR_LPPACAS 64
+#endif
+#else /* not iSeries */
+#define NR_LPPACAS 1
+#endif
+
+
/* The Hypervisor barfs if the lppaca crosses a page boundary. A 1k
* alignment is sufficient to prevent this */
struct lppaca {
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 991d5998d6be..fe56a23e1ff0 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -240,6 +240,12 @@ struct machdep_calls {
* claims to support kexec.
*/
int (*machine_kexec_prepare)(struct kimage *image);
+
+ /* Called to perform the _real_ kexec.
+ * Do NOT allocate memory or fail here. We are past the point of
+ * no return.
+ */
+ void (*machine_kexec)(struct kimage *image);
#endif /* CONFIG_KEXEC */
#ifdef CONFIG_SUSPEND
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 51e9e6f90d12..edeb80fdd2c3 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -171,6 +171,16 @@ static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
return bus->sysdata;
}
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+ struct pci_controller *host;
+
+ if (bus->self)
+ return pci_device_to_OF_node(bus->self);
+ host = pci_bus_to_host(bus);
+ return host ? host->dn : NULL;
+}
+
static inline int isa_vaddr_is_ioport(void __iomem *address)
{
/* No specific ISA handling on ppc32 at this stage, it
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index d72757585595..c189aa5fe1f4 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -70,21 +70,6 @@ static inline int of_node_to_nid(struct device_node *device) { return 0; }
#endif
#define of_node_to_nid of_node_to_nid
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev: the device whose interrupt is to be resolved
- * @out_irq: structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-struct pci_dev;
-struct of_irq;
-extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-
extern void of_instantiate_rtc(void);
/* These includes are put at the bottom because they may contain things
diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h
index 8447d89fbe72..bb1e2cdeb9bf 100644
--- a/arch/powerpc/include/asm/rwsem.h
+++ b/arch/powerpc/include/asm/rwsem.h
@@ -13,11 +13,6 @@
* by Paul Mackerras <paulus@samba.org>.
*/
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <asm/atomic.h>
-#include <asm/system.h>
-
/*
* the semaphore definition
*/
@@ -33,47 +28,6 @@
#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS
#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
-struct rw_semaphore {
- long count;
- spinlock_t wait_lock;
- struct list_head wait_list;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
- struct lockdep_map dep_map;
-#endif
-};
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
-#else
-# define __RWSEM_DEP_MAP_INIT(lockname)
-#endif
-
-#define __RWSEM_INITIALIZER(name) \
-{ \
- RWSEM_UNLOCKED_VALUE, \
- __SPIN_LOCK_UNLOCKED((name).wait_lock), \
- LIST_HEAD_INIT((name).wait_list) \
- __RWSEM_DEP_MAP_INIT(name) \
-}
-
-#define DECLARE_RWSEM(name) \
- struct rw_semaphore name = __RWSEM_INITIALIZER(name)
-
-extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
-extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
-
-extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
- struct lock_class_key *key);
-
-#define init_rwsem(sem) \
- do { \
- static struct lock_class_key __key; \
- \
- __init_rwsem((sem), #sem, &__key); \
- } while (0)
-
/*
* lock for reading
*/
@@ -174,10 +128,5 @@ static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem)
return atomic_long_add_return(delta, (atomic_long_t *)&sem->count);
}
-static inline int rwsem_is_locked(struct rw_semaphore *sem)
-{
- return sem->count != 0;
-}
-
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_RWSEM_H */
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index 49a170af8145..a5f8672eeff3 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -87,7 +87,10 @@ void machine_kexec(struct kimage *image)
save_ftrace_enabled = __ftrace_enabled_save();
- default_machine_kexec(image);
+ if (ppc_md.machine_kexec)
+ ppc_md.machine_kexec(image);
+ else
+ default_machine_kexec(image);
__ftrace_enabled_restore(save_ftrace_enabled);
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index ebf9846f3c3b..f4adf89d7614 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -27,20 +27,6 @@ extern unsigned long __toc_start;
#ifdef CONFIG_PPC_BOOK3S
/*
- * We only have to have statically allocated lppaca structs on
- * legacy iSeries, which supports at most 64 cpus.
- */
-#ifdef CONFIG_PPC_ISERIES
-#if NR_CPUS < 64
-#define NR_LPPACAS NR_CPUS
-#else
-#define NR_LPPACAS 64
-#endif
-#else /* not iSeries */
-#define NR_LPPACAS 1
-#endif
-
-/*
* The structure which the hypervisor knows about - this structure
* should not cross a page boundary. The vpa_init/register_vpa call
* is now known to fail if the lppaca structure crosses a page
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 10a44e68ef11..eb341be9a4d9 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/of_address.h>
+#include <linux/of_pci.h>
#include <linux/mm.h>
#include <linux/list.h>
#include <linux/syscalls.h>
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 7a1d5cb76932..8303a6c65ef7 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -353,6 +353,7 @@ static void switch_booke_debug_regs(struct thread_struct *new_thread)
prime_debug_regs(new_thread);
}
#else /* !CONFIG_PPC_ADV_DEBUG_REGS */
+#ifndef CONFIG_HAVE_HW_BREAKPOINT
static void set_debug_reg_defaults(struct thread_struct *thread)
{
if (thread->dabr) {
@@ -360,6 +361,7 @@ static void set_debug_reg_defaults(struct thread_struct *thread)
set_dabr(0);
}
}
+#endif /* !CONFIG_HAVE_HW_BREAKPOINT */
#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
int set_dabr(unsigned long dabr)
@@ -670,11 +672,11 @@ void flush_thread(void)
{
discard_lazy_cpu_state();
-#ifdef CONFIG_HAVE_HW_BREAKPOINTS
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
flush_ptrace_hw_breakpoint(current);
-#else /* CONFIG_HAVE_HW_BREAKPOINTS */
+#else /* CONFIG_HAVE_HW_BREAKPOINT */
set_debug_reg_defaults(&current->thread);
-#endif /* CONFIG_HAVE_HW_BREAKPOINTS */
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
}
void
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index c2b7a07cc3d3..47187cc2cf00 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -2,95 +2,11 @@
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/pci_regs.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/etherdevice.h>
#include <linux/of_address.h>
#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-
-#ifdef CONFIG_PCI
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
-{
- struct device_node *dn, *ppnode;
- struct pci_dev *ppdev;
- u32 lspec;
- u32 laddr[3];
- u8 pin;
- int rc;
-
- /* Check if we have a device node, if yes, fallback to standard OF
- * parsing
- */
- dn = pci_device_to_OF_node(pdev);
- if (dn) {
- rc = of_irq_map_one(dn, 0, out_irq);
- if (!rc)
- return rc;
- }
-
- /* Ok, we don't, time to have fun. Let's start by building up an
- * interrupt spec. we assume #interrupt-cells is 1, which is standard
- * for PCI. If you do different, then don't use that routine.
- */
- rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
- if (rc != 0)
- return rc;
- /* No pin, exit */
- if (pin == 0)
- return -ENODEV;
-
- /* Now we walk up the PCI tree */
- lspec = pin;
- for (;;) {
- /* Get the pci_dev of our parent */
- ppdev = pdev->bus->self;
-
- /* Ouch, it's a host bridge... */
- if (ppdev == NULL) {
-#ifdef CONFIG_PPC64
- ppnode = pci_bus_to_OF_node(pdev->bus);
-#else
- struct pci_controller *host;
- host = pci_bus_to_host(pdev->bus);
- ppnode = host ? host->dn : NULL;
-#endif
- /* No node for host bridge ? give up */
- if (ppnode == NULL)
- return -EINVAL;
- } else
- /* We found a P2P bridge, check if it has a node */
- ppnode = pci_device_to_OF_node(ppdev);
-
- /* Ok, we have found a parent with a device-node, hand over to
- * the OF parsing code.
- * We build a unit address from the linux device to be used for
- * resolution. Note that we use the linux bus number which may
- * not match your firmware bus numbering.
- * Fortunately, in most cases, interrupt-map-mask doesn't include
- * the bus number as part of the matching.
- * You should still be careful about that though if you intend
- * to rely on this function (you ship a firmware that doesn't
- * create device nodes for all PCI devices).
- */
- if (ppnode)
- break;
-
- /* We can only get here if we hit a P2P bridge with no node,
- * let's do standard swizzling and try again
- */
- lspec = pci_swizzle_interrupt_pin(pdev, lspec);
- pdev = ppdev;
- }
-
- laddr[0] = (pdev->bus->number << 16)
- | (pdev->devfn << 8);
- laddr[1] = laddr[2] = 0;
- return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
-}
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
-#endif /* CONFIG_PCI */
void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
unsigned long *busno, unsigned long *phys, unsigned long *size)
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 8a0deefac08d..b9150f07d266 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -160,7 +160,7 @@ SECTIONS
INIT_RAM_FS
}
- PERCPU(PAGE_SIZE)
+ PERCPU(L1_CACHE_BYTES, PAGE_SIZE)
. = ALIGN(8);
.machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) {
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index fd4812329570..0dc95c0aa3be 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1516,7 +1516,8 @@ int start_topology_update(void)
{
int rc = 0;
- if (firmware_has_feature(FW_FEATURE_VPHN) &&
+ /* Disabled until races with load balancing are fixed */
+ if (0 && firmware_has_feature(FW_FEATURE_VPHN) &&
get_lppaca()->shared_proc) {
vphn_enabled = 1;
setup_cpu_associativity_change_counters();
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 1ec06576f619..c14d09f614f3 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -38,13 +38,11 @@ DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
* neesd to be flushed. This function will either perform the flush
* immediately or will batch it up if the current CPU has an active
* batch on it.
- *
- * Must be called from within some kind of spinlock/non-preempt region...
*/
void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, unsigned long pte, int huge)
{
- struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
+ struct ppc64_tlb_batch *batch = &get_cpu_var(ppc64_tlb_batch);
unsigned long vsid, vaddr;
unsigned int psize;
int ssize;
@@ -99,6 +97,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
*/
if (!batch->active) {
flush_hash_page(vaddr, rpte, psize, ssize, 0);
+ put_cpu_var(ppc64_tlb_batch);
return;
}
@@ -127,6 +126,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
batch->index = ++i;
if (i >= PPC64_TLB_BATCH_NR)
__flush_tlb_pending(batch);
+ put_cpu_var(ppc64_tlb_batch);
}
/*
diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c
index 187a7d32f86a..a3d2ce54ea2e 100644
--- a/arch/powerpc/platforms/cell/spufs/syscalls.c
+++ b/arch/powerpc/platforms/cell/spufs/syscalls.c
@@ -70,7 +70,7 @@ static long do_spu_create(const char __user *pathname, unsigned int flags,
if (!IS_ERR(tmp)) {
struct nameidata nd;
- ret = path_lookup(tmp, LOOKUP_PARENT, &nd);
+ ret = kern_path_parent(tmp, &nd);
if (!ret) {
nd.flags |= LOOKUP_OPEN | LOOKUP_CREATE;
ret = spufs_create(&nd, flags, mode, neighbor);
diff --git a/arch/powerpc/platforms/iseries/dt.c b/arch/powerpc/platforms/iseries/dt.c
index fdb7384c0c4f..f0491cc28900 100644
--- a/arch/powerpc/platforms/iseries/dt.c
+++ b/arch/powerpc/platforms/iseries/dt.c
@@ -242,8 +242,8 @@ static void __init dt_cpus(struct iseries_flat_dt *dt)
pft_size[0] = 0; /* NUMA CEC cookie, 0 for non NUMA */
pft_size[1] = __ilog2(HvCallHpt_getHptPages() * HW_PAGE_SIZE);
- for (i = 0; i < NR_CPUS; i++) {
- if (lppaca_of(i).dyn_proc_status >= 2)
+ for (i = 0; i < NR_LPPACAS; i++) {
+ if (lppaca[i].dyn_proc_status >= 2)
continue;
snprintf(p, 32 - (p - buf), "@%d", i);
@@ -251,7 +251,7 @@ static void __init dt_cpus(struct iseries_flat_dt *dt)
dt_prop_str(dt, "device_type", device_type_cpu);
- index = lppaca_of(i).dyn_hv_phys_proc_index;
+ index = lppaca[i].dyn_hv_phys_proc_index;
d = &xIoHriProcessorVpd[index];
dt_prop_u32(dt, "i-cache-size", d->xInstCacheSize * 1024);
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index b0863410517f..2946ae10fbfd 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -680,6 +680,7 @@ void * __init iSeries_early_setup(void)
* on but calling this function multiple times is fine.
*/
identify_cpu(0, mfspr(SPRN_PVR));
+ initialise_paca(&boot_paca, 0);
powerpc_firmware_features |= FW_FEATURE_ISERIES;
powerpc_firmware_features |= FW_FEATURE_LPAR;
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index bc8803664140..33867ec4a234 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -17,6 +17,54 @@
#include <asm/pSeries_reconfig.h>
#include <asm/sparsemem.h>
+static unsigned long get_memblock_size(void)
+{
+ struct device_node *np;
+ unsigned int memblock_size = 0;
+
+ np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
+ if (np) {
+ const unsigned long *size;
+
+ size = of_get_property(np, "ibm,lmb-size", NULL);
+ memblock_size = size ? *size : 0;
+
+ of_node_put(np);
+ } else {
+ unsigned int memzero_size = 0;
+ const unsigned int *regs;
+
+ np = of_find_node_by_path("/memory@0");
+ if (np) {
+ regs = of_get_property(np, "reg", NULL);
+ memzero_size = regs ? regs[3] : 0;
+ of_node_put(np);
+ }
+
+ if (memzero_size) {
+ /* We now know the size of memory@0, use this to find
+ * the first memoryblock and get its size.
+ */
+ char buf[64];
+
+ sprintf(buf, "/memory@%x", memzero_size);
+ np = of_find_node_by_path(buf);
+ if (np) {
+ regs = of_get_property(np, "reg", NULL);
+ memblock_size = regs ? regs[3] : 0;
+ of_node_put(np);
+ }
+ }
+ }
+
+ return memblock_size;
+}
+
+unsigned long memory_block_size_bytes(void)
+{
+ return get_memblock_size();
+}
+
static int pseries_remove_memblock(unsigned long base, unsigned int memblock_size)
{
unsigned long start, start_pfn;
@@ -127,30 +175,22 @@ static int pseries_add_memory(struct device_node *np)
static int pseries_drconf_memory(unsigned long *base, unsigned int action)
{
- struct device_node *np;
- const unsigned long *lmb_size;
+ unsigned long memblock_size;
int rc;
- np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
- if (!np)
+ memblock_size = get_memblock_size();
+ if (!memblock_size)
return -EINVAL;
- lmb_size = of_get_property(np, "ibm,lmb-size", NULL);
- if (!lmb_size) {
- of_node_put(np);
- return -EINVAL;
- }
-
if (action == PSERIES_DRCONF_MEM_ADD) {
- rc = memblock_add(*base, *lmb_size);
+ rc = memblock_add(*base, memblock_size);
rc = (rc < 0) ? -EINVAL : 0;
} else if (action == PSERIES_DRCONF_MEM_REMOVE) {
- rc = pseries_remove_memblock(*base, *lmb_size);
+ rc = pseries_remove_memblock(*base, memblock_size);
} else {
rc = -EINVAL;
}
- of_node_put(np);
return rc;
}
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-26 11:08:44 +0000