diff options
Diffstat (limited to 'arch')
206 files changed, 1947 insertions, 5173 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 78c0621d5819..2c2ac3f3ff80 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -76,6 +76,10 @@ config STACKTRACE_SUPPORT config HAVE_LATENCYTOP_SUPPORT def_bool y +config HAVE_ARCH_TRANSPARENT_HUGEPAGE + def_bool y + depends on ARC_MMU_V4 + source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -190,6 +194,16 @@ config NR_CPUS range 2 4096 default "4" +config ARC_SMP_HALT_ON_RESET + bool "Enable Halt-on-reset boot mode" + default y if ARC_UBOOT_SUPPORT + help + In SMP configuration cores can be configured as Halt-on-reset + or they could all start at same time. For Halt-on-reset, non + masters are parked until Master kicks them so they can start of + at designated entry point. For other case, all jump to common + entry point and spin wait for Master's signal. + endif #SMP menuconfig ARC_CACHE @@ -278,6 +292,8 @@ choice default ARC_MMU_V2 if ARC_CPU_750D default ARC_MMU_V4 if ARC_CPU_HS +if ISA_ARCOMPACT + config ARC_MMU_V1 bool "MMU v1" help @@ -297,6 +313,8 @@ config ARC_MMU_V3 Variable Page size (1k-16k), var JTLB size 128 x (2 or 4) Shared Address Spaces (SASID) +endif + config ARC_MMU_V4 bool "MMU v4" depends on ISA_ARCV2 @@ -428,6 +446,28 @@ config LINUX_LINK_BASE Linux needs to be scooted a bit. If you don't know what the above means, leave this setting alone. +config HIGHMEM + bool "High Memory Support" + help + With ARC 2G:2G address split, only upper 2G is directly addressable by + kernel. Enable this to potentially allow access to rest of 2G and PAE + in future + +config ARC_HAS_PAE40 + bool "Support for the 40-bit Physical Address Extension" + default n + depends on ISA_ARCV2 + select HIGHMEM + help + Enable access to physical memory beyond 4G, only supported on + ARC cores with 40 bit Physical Addressing support + +config ARCH_PHYS_ADDR_T_64BIT + def_bool ARC_HAS_PAE40 + +config ARCH_DMA_ADDR_T_64BIT + bool + config ARC_CURR_IN_REG bool "Dedicate Register r25 for current_task pointer" default y diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi index a5e2726a067e..420dcfde289f 100644 --- a/arch/arc/boot/dts/axc001.dtsi +++ b/arch/arc/boot/dts/axc001.dtsi @@ -95,6 +95,6 @@ #size-cells = <1>; ranges = <0x00000000 0x80000000 0x40000000>; device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512MiB */ + reg = <0x80000000 0x20000000>; /* 512MiB */ }; }; diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi index 846481f37eef..f90fadf7f94e 100644 --- a/arch/arc/boot/dts/axc003.dtsi +++ b/arch/arc/boot/dts/axc003.dtsi @@ -98,6 +98,6 @@ #size-cells = <1>; ranges = <0x00000000 0x80000000 0x40000000>; device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512MiB */ + reg = <0x80000000 0x20000000>; /* 512MiB */ }; }; diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi index 2f0b33257db2..06a9f294a2e6 100644 --- a/arch/arc/boot/dts/axc003_idu.dtsi +++ b/arch/arc/boot/dts/axc003_idu.dtsi @@ -121,6 +121,6 @@ #size-cells = <1>; ranges = <0x00000000 0x80000000 0x40000000>; device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512MiB */ + reg = <0x80000000 0x20000000>; /* 512MiB */ }; }; diff --git a/arch/arc/boot/dts/nsim_hs.dts b/arch/arc/boot/dts/nsim_hs.dts index 911f069e0540..b0eb0e7fe21d 100644 --- a/arch/arc/boot/dts/nsim_hs.dts +++ b/arch/arc/boot/dts/nsim_hs.dts @@ -11,8 +11,16 @@ / { compatible = "snps,nsim_hs"; + #address-cells = <2>; + #size-cells = <2>; interrupt-parent = <&core_intc>; + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000 /* 1 GB low mem */ + 0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */ + }; + chosen { bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8"; }; @@ -26,8 +34,8 @@ #address-cells = <1>; #size-cells = <1>; - /* child and parent address space 1:1 mapped */ - ranges; + /* only perip space at end of low mem accessible */ + ranges = <0x80000000 0x0 0x80000000 0x80000000>; core_intc: core-interrupt-controller { compatible = "snps,archs-intc"; diff --git a/arch/arc/boot/dts/skeleton.dtsi b/arch/arc/boot/dts/skeleton.dtsi index a870bdd5e404..296d371a335c 100644 --- a/arch/arc/boot/dts/skeleton.dtsi +++ b/arch/arc/boot/dts/skeleton.dtsi @@ -32,6 +32,6 @@ memory { device_type = "memory"; - reg = <0x00000000 0x10000000>; /* 256M */ + reg = <0x80000000 0x10000000>; /* 256M */ }; }; diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi index 9393fd902f0d..84226bd48baf 100644 --- a/arch/arc/boot/dts/vdk_axc003.dtsi +++ b/arch/arc/boot/dts/vdk_axc003.dtsi @@ -56,6 +56,6 @@ #size-cells = <1>; ranges = <0x00000000 0x80000000 0x40000000>; device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512MiB */ + reg = <0x80000000 0x20000000>; /* 512MiB */ }; }; diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi index 9bee8ed09eb0..31f0fb5fc91d 100644 --- a/arch/arc/boot/dts/vdk_axc003_idu.dtsi +++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi @@ -71,6 +71,6 @@ #size-cells = <1>; ranges = <0x00000000 0x80000000 0x40000000>; device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512MiB */ + reg = <0x80000000 0x20000000>; /* 512MiB */ }; }; diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig index 562dac6a7f78..c92c0ef1e9d2 100644 --- a/arch/arc/configs/axs101_defconfig +++ b/arch/arc/configs/axs101_defconfig @@ -89,7 +89,6 @@ CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_DW=y -CONFIG_MMC_DW_IDMAC=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig index 83a6d8d5cc58..cfac24e0e7b6 100644 --- a/arch/arc/configs/axs103_defconfig +++ b/arch/arc/configs/axs103_defconfig @@ -95,7 +95,6 @@ CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_DW=y -CONFIG_MMC_DW_IDMAC=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig index f1e1c84e0dda..9922a118a15a 100644 --- a/arch/arc/configs/axs103_smp_defconfig +++ b/arch/arc/configs/axs103_smp_defconfig @@ -96,7 +96,6 @@ CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_DW=y -CONFIG_MMC_DW_IDMAC=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h index d8023bc8d1ad..7fac7d85ed6a 100644 --- a/arch/arc/include/asm/arcregs.h +++ b/arch/arc/include/asm/arcregs.h @@ -120,7 +120,7 @@ /* gcc builtin sr needs reg param to be long immediate */ #define write_aux_reg(reg_immed, val) \ - __builtin_arc_sr((unsigned int)val, reg_immed) + __builtin_arc_sr((unsigned int)(val), reg_immed) #else @@ -327,8 +327,8 @@ struct bcr_generic { */ struct cpuinfo_arc_mmu { - unsigned int ver:4, pg_sz_k:8, s_pg_sz_m:8, u_dtlb:6, u_itlb:6; - unsigned int num_tlb:16, sets:12, ways:4; + unsigned int ver:4, pg_sz_k:8, s_pg_sz_m:8, pad:10, sasid:1, pae:1; + unsigned int sets:12, ways:4, u_dtlb:8, u_itlb:8; }; struct cpuinfo_arc_cache { diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index e23ea6e7633a..abf06e81c929 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -65,6 +65,7 @@ extern int ioc_exists; #if defined(CONFIG_ARC_MMU_V3) || defined(CONFIG_ARC_MMU_V4) #define ARC_REG_IC_PTAG 0x1E #endif +#define ARC_REG_IC_PTAG_HI 0x1F /* Bit val in IC_CTRL */ #define IC_CTRL_CACHE_DISABLE 0x1 @@ -77,6 +78,7 @@ extern int ioc_exists; #define ARC_REG_DC_FLSH 0x4B #define ARC_REG_DC_FLDL 0x4C #define ARC_REG_DC_PTAG 0x5C +#define ARC_REG_DC_PTAG_HI 0x5F /* Bit val in DC_CTRL */ #define DC_CTRL_INV_MODE_FLUSH 0x40 diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h index 0992d3dbcc65..fbe3587c4f36 100644 --- a/arch/arc/include/asm/cacheflush.h +++ b/arch/arc/include/asm/cacheflush.h @@ -31,10 +31,10 @@ void flush_cache_all(void); -void flush_icache_range(unsigned long start, unsigned long end); -void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len); -void __inv_icache_page(unsigned long paddr, unsigned long vaddr); -void __flush_dcache_page(unsigned long paddr, unsigned long vaddr); +void flush_icache_range(unsigned long kstart, unsigned long kend); +void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len); +void __inv_icache_page(phys_addr_t paddr, unsigned long vaddr); +void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr); #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h index 415443c2a8c4..1aff3be91075 100644 --- a/arch/arc/include/asm/entry-compact.h +++ b/arch/arc/include/asm/entry-compact.h @@ -110,13 +110,12 @@ .macro FAKE_RET_FROM_EXCPN - ld r9, [sp, PT_status32] - bic r9, r9, (STATUS_U_MASK|STATUS_DE_MASK) - bset r9, r9, STATUS_L_BIT - sr r9, [erstatus] - mov r9, 55f - sr r9, [eret] - + lr r9, [status32] + bclr r9, r9, STATUS_AE_BIT + or r9, r9, (STATUS_E1_MASK|STATUS_E2_MASK) + sr r9, [erstatus] + mov r9, 55f + sr r9, [eret] rtie 55: .endm diff --git a/arch/arc/include/asm/highmem.h b/arch/arc/include/asm/highmem.h new file mode 100644 index 000000000000..b1585c96324a --- /dev/null +++ b/arch/arc/include/asm/highmem.h @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2015 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef CONFIG_HIGHMEM + +#include <uapi/asm/page.h> +#include <asm/kmap_types.h> + +/* start after vmalloc area */ +#define FIXMAP_BASE (PAGE_OFFSET - FIXMAP_SIZE - PKMAP_SIZE) +#define FIXMAP_SIZE PGDIR_SIZE /* only 1 PGD worth */ +#define KM_TYPE_NR ((FIXMAP_SIZE >> PAGE_SHIFT)/NR_CPUS) +#define FIXMAP_ADDR(nr) (FIXMAP_BASE + ((nr) << PAGE_SHIFT)) + +/* start after fixmap area */ +#define PKMAP_BASE (FIXMAP_BASE + FIXMAP_SIZE) +#define PKMAP_SIZE PGDIR_SIZE +#define LAST_PKMAP (PKMAP_SIZE >> PAGE_SHIFT) +#define LAST_PKMAP_MASK (LAST_PKMAP - 1) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) +#define PKMAP_NR(virt) (((virt) - PKMAP_BASE) >> PAGE_SHIFT) + +#define kmap_prot PAGE_KERNEL + + +#include <asm/cacheflush.h> + +extern void *kmap(struct page *page); +extern void *kmap_high(struct page *page); +extern void *kmap_atomic(struct page *page); +extern void __kunmap_atomic(void *kvaddr); +extern void kunmap_high(struct page *page); + +extern void kmap_init(void); + +static inline void flush_cache_kmaps(void) +{ + flush_cache_all(); +} + +static inline void kunmap(struct page *page) +{ + BUG_ON(in_interrupt()); + if (!PageHighMem(page)) + return; + kunmap_high(page); +} + + +#endif + +#endif diff --git a/arch/arc/include/asm/hugepage.h b/arch/arc/include/asm/hugepage.h new file mode 100644 index 000000000000..c5094de86403 --- /dev/null +++ b/arch/arc/include/asm/hugepage.h @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#ifndef _ASM_ARC_HUGEPAGE_H +#define _ASM_ARC_HUGEPAGE_H + +#include <linux/types.h> +#include <asm-generic/pgtable-nopmd.h> + +static inline pte_t pmd_pte(pmd_t pmd) +{ + return __pte(pmd_val(pmd)); +} + +static inline pmd_t pte_pmd(pte_t pte) +{ + return __pmd(pte_val(pte)); +} + +#define pmd_wrprotect(pmd) pte_pmd(pte_wrprotect(pmd_pte(pmd))) +#define pmd_mkwrite(pmd) pte_pmd(pte_mkwrite(pmd_pte(pmd))) +#define pmd_mkdirty(pmd) pte_pmd(pte_mkdirty(pmd_pte(pmd))) +#define pmd_mkold(pmd) pte_pmd(pte_mkold(pmd_pte(pmd))) +#define pmd_mkyoung(pmd) pte_pmd(pte_mkyoung(pmd_pte(pmd))) +#define pmd_mkhuge(pmd) pte_pmd(pte_mkhuge(pmd_pte(pmd))) +#define pmd_mknotpresent(pmd) pte_pmd(pte_mknotpresent(pmd_pte(pmd))) +#define pmd_mksplitting(pmd) pte_pmd(pte_mkspecial(pmd_pte(pmd))) +#define pmd_mkclean(pmd) pte_pmd(pte_mkclean(pmd_pte(pmd))) + +#define pmd_write(pmd) pte_write(pmd_pte(pmd)) +#define pmd_young(pmd) pte_young(pmd_pte(pmd)) +#define pmd_pfn(pmd) pte_pfn(pmd_pte(pmd)) +#define pmd_dirty(pmd) pte_dirty(pmd_pte(pmd)) +#define pmd_special(pmd) pte_special(pmd_pte(pmd)) + +#define mk_pmd(page, prot) pte_pmd(mk_pte(page, prot)) + +#define pmd_trans_huge(pmd) (pmd_val(pmd) & _PAGE_HW_SZ) +#define pmd_trans_splitting(pmd) (pmd_trans_huge(pmd) && pmd_special(pmd)) + +#define pfn_pmd(pfn, prot) (__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))) + +static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot) +{ + /* + * open-coded pte_modify() with additional retaining of HW_SZ bit + * so that pmd_trans_huge() remains true for this PMD + */ + return __pmd((pmd_val(pmd) & (_PAGE_CHG_MASK | _PAGE_HW_SZ)) | pgprot_val(newprot)); +} + +static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr, + pmd_t *pmdp, pmd_t pmd) +{ + *pmdp = pmd; +} + +extern void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr, + pmd_t *pmd); + +#define has_transparent_hugepage() 1 + +/* Generic variants assume pgtable_t is struct page *, hence need for these */ +#define __HAVE_ARCH_PGTABLE_DEPOSIT +extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp, + pgtable_t pgtable); + +#define __HAVE_ARCH_PGTABLE_WITHDRAW +extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp); + +#define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE +extern void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); + +#endif diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h index bc5103637326..4fd7d62a6e30 100644 --- a/arch/arc/include/asm/irq.h +++ b/arch/arc/include/asm/irq.h @@ -16,6 +16,7 @@ #ifdef CONFIG_ISA_ARCOMPACT #define TIMER0_IRQ 3 #define TIMER1_IRQ 4 +#define IPI_IRQ (NR_CPU_IRQS-1) /* dummy to enable SMP build for up hardware */ #else #define TIMER0_IRQ 16 #define TIMER1_IRQ 17 diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h index aa805575c320..d8c608174617 100644 --- a/arch/arc/include/asm/irqflags-compact.h +++ b/arch/arc/include/asm/irqflags-compact.h @@ -23,11 +23,13 @@ #define STATUS_E2_BIT 2 /* Int 2 enable */ #define STATUS_A1_BIT 3 /* Int 1 active */ #define STATUS_A2_BIT 4 /* Int 2 active */ +#define STATUS_AE_BIT 5 /* Exception active */ #define STATUS_E1_MASK (1<<STATUS_E1_BIT) #define STATUS_E2_MASK (1<<STATUS_E2_BIT) #define STATUS_A1_MASK (1<<STATUS_A1_BIT) #define STATUS_A2_MASK (1<<STATUS_A2_BIT) +#define STATUS_AE_MASK (1<<STATUS_AE_BIT) #define STATUS_IE_MASK (STATUS_E1_MASK | STATUS_E2_MASK) /* Other Interrupt Handling related Aux regs */ @@ -91,7 +93,19 @@ static inline void arch_local_irq_restore(unsigned long flags) /* * Unconditionally Enable IRQs */ -extern void arch_local_irq_enable(void); +static inline void arch_local_irq_enable(void) +{ + unsigned long temp; + + __asm__ __volatile__( + " lr %0, [status32] \n" + " or %0, %0, %1 \n" + " flag %0 \n" + : "=&r"(temp) + : "n"((STATUS_E1_MASK | STATUS_E2_MASK)) + : "cc", "memory"); +} + /* * Unconditionally Disable IRQs diff --git a/arch/arc/include/asm/kmap_types.h b/arch/arc/include/asm/kmap_types.h new file mode 100644 index 000000000000..f0d7f6acea4e --- /dev/null +++ b/arch/arc/include/asm/kmap_types.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2015 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _ASM_KMAP_TYPES_H +#define _ASM_KMAP_TYPES_H + +/* + * We primarily need to define KM_TYPE_NR here but that in turn + * is a function of PGDIR_SIZE etc. + * To avoid circular deps issue, put everything in asm/highmem.h + */ +#endif diff --git a/arch/arc/include/asm/mach_desc.h b/arch/arc/include/asm/mach_desc.h index e8993a2be6c2..6ff657a904b6 100644 --- a/arch/arc/include/asm/mach_desc.h +++ b/arch/arc/include/asm/mach_desc.h @@ -23,11 +23,8 @@ * @dt_compat: Array of device tree 'compatible' strings * (XXX: although only 1st entry is looked at) * @init_early: Very early callback [called from setup_arch()] - * @init_irq: setup external IRQ controllers [called from init_IRQ()] - * @init_smp: for each CPU (e.g. setup IPI) + * @init_cpu_smp: for each CPU as it is coming up (SMP as well as UP) * [(M):init_IRQ(), (o):start_kernel_secondary()] - * @init_time: platform specific clocksource/clockevent registration - * [called from time_init()] * @init_machine: arch initcall level callback (e.g. populate static * platform devices or parse Devicetree) * @init_late: Late initcall level callback @@ -36,13 +33,10 @@ struct machine_desc { const char *name; const char **dt_compat; - void (*init_early)(void); - void (*init_irq)(void); #ifdef CONFIG_SMP - void (*init_smp)(unsigned int); + void (*init_cpu_smp)(unsigned int); #endif - void (*init_time)(void); void (*init_machine)(void); void (*init_late)(void); diff --git a/arch/arc/include/asm/mcip.h b/arch/arc/include/asm/mcip.h index 52c11f0bb0e5..46f4e5351b2a 100644 --- a/arch/arc/include/asm/mcip.h +++ b/arch/arc/include/asm/mcip.h @@ -86,9 +86,6 @@ static inline void __mcip_cmd_data(unsigned int cmd, unsigned int param, __mcip_cmd(cmd, param); } -extern void mcip_init_early_smp(void); -extern void mcip_init_smp(unsigned int cpu); - #endif #endif diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h index 0f9c3eb5327e..b144d7ca7d20 100644 --- a/arch/arc/include/asm/mmu.h +++ b/arch/arc/include/asm/mmu.h @@ -24,6 +24,7 @@ #if (CONFIG_ARC_MMU_VER < 4) #define ARC_REG_TLBPD0 0x405 #define ARC_REG_TLBPD1 0x406 +#define ARC_REG_TLBPD1HI 0 /* Dummy: allows code sharing with ARC700 */ #define ARC_REG_TLBINDEX 0x407 #define ARC_REG_TLBCOMMAND 0x408 #define ARC_REG_PID 0x409 @@ -31,6 +32,7 @@ #else #define ARC_REG_TLBPD0 0x460 #define ARC_REG_TLBPD1 0x461 +#define ARC_REG_TLBPD1HI 0x463 #define ARC_REG_TLBINDEX 0x464 #define ARC_REG_TLBCOMMAND 0x465 #define ARC_REG_PID 0x468 @@ -83,6 +85,11 @@ void arc_mmu_init(void); extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len); void read_decode_mmu_bcr(void); +static inline int is_pae40_enabled(void) +{ + return IS_ENABLED(CONFIG_ARC_HAS_PAE40); +} + #endif /* !__ASSEMBLY__ */ #endif diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h index 9c8aa41e45c2..429957f1c236 100644 --- a/arch/arc/include/asm/page.h +++ b/arch/arc/include/asm/page.h @@ -43,7 +43,6 @@ typedef struct { typedef struct { unsigned long pgprot; } pgprot_t; -typedef unsigned long pgtable_t; #define pte_val(x) ((x).pte) #define pgd_val(x) ((x).pgd) @@ -57,20 +56,26 @@ typedef unsigned long pgtable_t; #else /* !STRICT_MM_TYPECHECKS */ +#ifdef CONFIG_ARC_HAS_PAE40 +typedef unsigned long long pte_t; +#else typedef unsigned long pte_t; +#endif typedef unsigned long pgd_t; typedef unsigned long pgprot_t; -typedef unsigned long pgtable_t; #define pte_val(x) (x) #define pgd_val(x) (x) #define pgprot_val(x) (x) #define __pte(x) (x) +#define __pgd(x) (x) #define __pgprot(x) (x) #define pte_pgprot(x) (x) #endif +typedef pte_t * pgtable_t; + #define ARCH_PFN_OFFSET (CONFIG_LINUX_LINK_BASE >> PAGE_SHIFT) #define pfn_valid(pfn) (((pfn) - ARCH_PFN_OFFSET) < max_mapnr) diff --git a/arch/arc/include/asm/pgalloc.h b/arch/arc/include/asm/pgalloc.h index 81208bfd9dcb..86ed671286df 100644 --- a/arch/arc/include/asm/pgalloc.h +++ b/arch/arc/include/asm/pgalloc.h @@ -49,7 +49,7 @@ pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t ptep) static inline int __get_order_pgd(void) { - return get_order(PTRS_PER_PGD * 4); + return get_order(PTRS_PER_PGD * sizeof(pgd_t)); } static inline pgd_t *pgd_alloc(struct mm_struct *mm) @@ -87,7 +87,7 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) static inline int __get_order_pte(void) { - return get_order(PTRS_PER_PTE * 4); + return get_order(PTRS_PER_PTE * sizeof(pte_t)); } static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, @@ -107,10 +107,10 @@ pte_alloc_one(struct mm_struct *mm, unsigned long address) pgtable_t pte_pg; struct page *page; - pte_pg = __get_free_pages(GFP_KERNEL | __GFP_REPEAT, __get_order_pte()); + pte_pg = (pgtable_t)__get_free_pages(GFP_KERNEL | __GFP_REPEAT, __get_order_pte()); if (!pte_pg) return 0; - memzero((void *)pte_pg, PTRS_PER_PTE * 4); + memzero((void *)pte_pg, PTRS_PER_PTE * sizeof(pte_t)); page = virt_to_page(pte_pg); if (!pgtable_page_ctor(page)) { __free_page(page); @@ -128,12 +128,12 @@ static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) static inline void pte_free(struct mm_struct *mm, pgtable_t ptep) { pgtable_page_dtor(virt_to_page(ptep)); - free_pages(ptep, __get_order_pte()); + free_pages((unsigned long)ptep, __get_order_pte()); } #define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte) #define check_pgt_cache() do { } while (0) -#define pmd_pgtable(pmd) pmd_page_vaddr(pmd) +#define pmd_pgtable(pmd) ((pgtable_t) pmd_page_vaddr(pmd)) #endif /* _ASM_ARC_PGALLOC_H */ diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 1281718802f7..57af2f05ae84 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -38,6 +38,7 @@ #include <asm/page.h> #include <asm/mmu.h> #include <asm-generic/pgtable-nopmd.h> +#include <linux/const.h> /************************************************************************** * Page Table Flags @@ -60,7 +61,8 @@ #define _PAGE_EXECUTE (1<<3) /* Page has user execute perm (H) */ #define _PAGE_WRITE (1<<4) /* Page has user write perm (H) */ #define _PAGE_READ (1<<5) /* Page has user read perm (H) */ -#define _PAGE_MODIFIED (1<<6) /* Page modified (dirty) (S) */ +#define _PAGE_DIRTY (1<<6) /* Page modified (dirty) (S) */ +#define _PAGE_SPECIAL (1<<7) #define _PAGE_GLOBAL (1<<8) /* Page is global (H) */ #define _PAGE_PRESENT (1<<10) /* TLB entry is valid (H) */ @@ -71,7 +73,8 @@ #define _PAGE_WRITE (1<<2) /* Page has user write perm (H) */ #define _PAGE_READ (1<<3) /* Page has user read perm (H) */ #define _PAGE_ACCESSED (1<<4) /* Page is accessed (S) */ -#define _PAGE_MODIFIED (1<<5) /* Page modified (dirty) (S) */ +#define _PAGE_DIRTY (1<<5) /* Page modified (dirty) (S) */ +#define _PAGE_SPECIAL (1<<6) #if (CONFIG_ARC_MMU_VER >= 4) #define _PAGE_WTHRU (1<<7) /* Page cache mode write-thru (H) */ @@ -81,32 +84,33 @@ #define _PAGE_PRESENT (1<<9) /* TLB entry is valid (H) */ #if (CONFIG_ARC_MMU_VER >= 4) -#define _PAGE_SZ (1<<10) /* Page Size indicator (H) */ +#define _PAGE_HW_SZ (1<<10) /* Page Size indicator (H): 0 normal, 1 super */ #endif #define _PAGE_SHARED_CODE (1<<11) /* Shared Code page with cmn vaddr usable for shared TLB entries (H) */ + +#define _PAGE_UNUSED_BIT (1<<12) #endif /* vmalloc permissions */ #define _K_PAGE_PERMS (_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \ _PAGE_GLOBAL | _PAGE_PRESENT) -#ifdef CONFIG_ARC_CACHE_PAGES -#define _PAGE_DEF_CACHEABLE _PAGE_CACHEABLE -#else -#define _PAGE_DEF_CACHEABLE (0) +#ifndef CONFIG_ARC_CACHE_PAGES +#undef _PAGE_CACHEABLE +#define _PAGE_CACHEABLE 0 #endif -/* Helper for every "user" page - * -kernel can R/W/X - * -by default cached, unless config otherwise - * -present in memory - */ -#define ___DEF (_PAGE_PRESENT | _PAGE_DEF_CACHEABLE) +#ifndef _PAGE_HW_SZ +#define _PAGE_HW_SZ 0 +#endif + +/* Defaults for every user page */ +#define ___DEF (_PAGE_PRESENT | _PAGE_CACHEABLE) /* Set of bits not changed in pte_modify */ -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED) +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) /* More Abbrevaited helpers */ #define PAGE_U_NONE __pgprot(___DEF) @@ -122,15 +126,20 @@ * user vaddr space - visible in all addr spaces, but kernel mode only * Thus Global, all-kernel-access, no-user-access, cached */ -#define PAGE_KERNEL __pgprot(_K_PAGE_PERMS | _PAGE_DEF_CACHEABLE) +#define PAGE_KERNEL __pgprot(_K_PAGE_PERMS | _PAGE_CACHEABLE) /* ioremap */ #define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS) /* Masks for actual TLB "PD"s */ -#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT) +#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ) #define PTE_BITS_RWX (_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ) + +#ifdef CONFIG_ARC_HAS_PAE40 +#define PTE_BITS_NON_RWX_IN_PD1 (0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE) +#else #define PTE_BITS_NON_RWX_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE) +#endif /************************************************************************** * Mapping of vm_flags (Generic VM) to PTE flags (arch specific) @@ -191,26 +200,22 @@ /* Optimal Sizing of Pg Tbl - based on MMU page size */ #if defined(CONFIG_ARC_PAGE_SIZE_8K) -#define BITS_FOR_PTE 8 +#define BITS_FOR_PTE 8 /* 11:8:13 */ #elif defined(CONFIG_ARC_PAGE_SIZE_16K) -#define BITS_FOR_PTE 8 +#define BITS_FOR_PTE 8 /* 10:8:14 */ #elif defined(CONFIG_ARC_PAGE_SIZE_4K) -#define BITS_FOR_PTE 9 +#define BITS_FOR_PTE 9 /* 11:9:12 */ #endif #define BITS_FOR_PGD (32 - BITS_FOR_PTE - BITS_IN_PAGE) -#define PGDIR_SHIFT (BITS_FOR_PTE + BITS_IN_PAGE) +#define PGDIR_SHIFT (32 - BITS_FOR_PGD) #define PGDIR_SIZE (1UL << PGDIR_SHIFT) /* vaddr span, not PDG sz */ #define PGDIR_MASK (~(PGDIR_SIZE-1)) -#ifdef __ASSEMBLY__ -#define PTRS_PER_PTE (1 << BITS_FOR_PTE) -#define PTRS_PER_PGD (1 << BITS_FOR_PGD) -#else -#define PTRS_PER_PTE (1UL << BITS_FOR_PTE) -#define PTRS_PER_PGD (1UL << BITS_FOR_PGD) -#endif +#define PTRS_PER_PTE _BITUL(BITS_FOR_PTE) +#define PTRS_PER_PGD _BITUL(BITS_FOR_PGD) + /* * Number of entries a user land program use. * TASK_SIZE is the maximum vaddr that can be used by a userland program. @@ -270,15 +275,10 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep) (unsigned long)(((pte_val(x) - CONFIG_LINUX_LINK_BASE) >> \ PAGE_SHIFT))) -#define mk_pte(page, pgprot) \ -({ \ - pte_t pte; \ - pte_val(pte) = __pa(page_address(page)) + pgprot_val(pgprot); \ - pte; \ -}) - +#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot) #define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) -#define pfn_pte(pfn, prot) (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))) +#define pfn_pte(pfn, prot) (__pte(((pte_t)(pfn) << PAGE_SHIFT) | \ + pgprot_val(prot))) #define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) /* @@ -295,23 +295,26 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep) /* Zoo of pte_xxx function */ #define pte_read(pte) (pte_val(pte) & _PAGE_READ) #define pte_write(pte) (pte_val(pte) & _PAGE_WRITE) -#define pte_dirty(pte) (pte_val(pte) & _PAGE_MODIFIED) +#define pte_dirty(pte) (pte_val(pte) & _PAGE_DIRTY) #define pte_young(pte) (pte_val(pte) & _PAGE_ACCESSED) -#define pte_special(pte) (0) +#define pte_special(pte) (pte_val(pte) & _PAGE_SPECIAL) #define PTE_BIT_FUNC(fn, op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } +PTE_BIT_FUNC(mknotpresent, &= ~(_PAGE_PRESENT)); PTE_BIT_FUNC(wrprotect, &= ~(_PAGE_WRITE)); PTE_BIT_FUNC(mkwrite, |= (_PAGE_WRITE)); -PTE_BIT_FUNC(mkclean, &= ~(_PAGE_MODIFIED)); -PTE_BIT_FUNC(mkdirty, |= (_PAGE_MODIFIED)); +PTE_BIT_FUNC(mkclean, &= ~(_PAGE_DIRTY)); +PTE_BIT_FUNC(mkdirty, |= (_PAGE_DIRTY)); PTE_BIT_FUNC(mkold, &= ~(_PAGE_ACCESSED)); PTE_BIT_FUNC(mkyoung, |= (_PAGE_ACCESSED)); PTE_BIT_FUNC(exprotect, &= ~(_PAGE_EXECUTE)); PTE_BIT_FUNC(mkexec, |= (_PAGE_EXECUTE)); +PTE_BIT_FUNC(mkspecial, |= (_PAGE_SPECIAL)); +PTE_BIT_FUNC(mkhuge, |= (_PAGE_HW_SZ)); -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } +#define __HAVE_ARCH_PTE_SPECIAL static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { @@ -357,7 +360,6 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, #define pgd_offset_fast(mm, addr) pgd_offset(mm, addr) #endif -extern void paging_init(void); extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE); void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep); @@ -383,6 +385,10 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, * remap a physical page `pfn' of size `size' with page protection `prot' * into virtual address `from' */ +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +#include <asm/hugepage.h> +#endif + #include <asm-generic/pgtable.h> /* to cope with aliasing VIPT cache */ diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h index ee682d8e0213..44545354e9e8 100644 --- a/arch/arc/include/asm/processor.h +++ b/arch/arc/include/asm/processor.h @@ -114,7 +114,12 @@ extern unsigned int get_wchan(struct task_struct *p); * ----------------------------------------------------------------------------- */ #define VMALLOC_START 0x70000000 -#define VMALLOC_SIZE (PAGE_OFFSET - VMALLOC_START) + +/* + * 1 PGDIR_SIZE each for fixmap/pkmap, 2 PGDIR_SIZE gutter + * See asm/highmem.h for details + */ +#define VMALLOC_SIZE (PAGE_OFFSET - VMALLOC_START - PGDIR_SIZE * 4) #define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE) #define USER_KERNEL_GUTTER 0x10000000 diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h index 6e3ef5ba4f74..307846691be6 100644 --- a/arch/arc/include/asm/setup.h +++ b/arch/arc/include/asm/setup.h @@ -33,4 +33,11 @@ extern int root_mountflags, end_mem; void setup_processor(void); void __init setup_arch_memory(void); +/* Helpers used in arc_*_mumbojumbo routines */ +#define IS_AVAIL1(v, s) ((v) ? s : "") +#define IS_DISABLED_RUN(v) ((v) ? "" : "(disabled) ") +#define IS_USED_RUN(v) ((v) ? "" : "(not used) ") +#define IS_USED_CFG(cfg) IS_USED_RUN(IS_ENABLED(cfg)) +#define IS_AVAIL2(v, s, cfg) IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg)) + #endif /* __ASMARC_SETUP_H */ diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h index 3845b9e94f69..133c867d15af 100644 --- a/arch/arc/include/asm/smp.h +++ b/arch/arc/include/asm/smp.h @@ -45,12 +45,19 @@ extern int smp_ipi_irq_setup(int cpu, int irq); * struct plat_smp_ops - SMP callbacks provided by platform to ARC SMP * * @info: SoC SMP specific info for /proc/cpuinfo etc + * @init_early_smp: A SMP specific h/w block can init itself + * Could be common across platforms so not covered by + * mach_desc->init_early() + * @init_irq_cpu: Called for each core so SMP h/w block driver can do + * any needed setup per cpu (e.g. IPI request) * @cpu_kick: For Master to kickstart a cpu (optionally at a PC) * @ipi_send: To send IPI to a @cpu * @ips_clear: To clear IPI received at @irq */ struct plat_smp_ops { const char *info; + void (*init_early_smp)(void); + void (*init_irq_cpu)(int cpu); void (*cpu_kick)(int cpu, unsigned long pc); void (*ipi_send)(int cpu); void (*ipi_clear)(int irq); diff --git a/arch/arc/include/asm/tlbflush.h b/arch/arc/include/asm/tlbflush.h index 71c7b2e4b874..1fe9c8c80280 100644 --- a/arch/arc/include/asm/tlbflush.h +++ b/arch/arc/include/asm/tlbflush.h @@ -17,6 +17,8 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page); void local_flush_tlb_kernel_range(unsigned long start, unsigned long end); void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); +void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); #ifndef CONFIG_SMP #define flush_tlb_range(vma, s, e) local_flush_tlb_range(vma, s, e) @@ -24,6 +26,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, #define flush_tlb_kernel_range(s, e) local_flush_tlb_kernel_range(s, e) #define flush_tlb_all() local_flush_tlb_all() #define flush_tlb_mm(mm) local_flush_tlb_mm(mm) +#define flush_pmd_tlb_range(vma, s, e) local_flush_pmd_tlb_range(vma, s, e) #else extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); @@ -31,5 +34,7 @@ extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page); extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); extern void flush_tlb_all(void); extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); + #endif /* CONFIG_SMP */ #endif diff --git a/arch/arc/include/uapi/asm/page.h b/arch/arc/include/uapi/asm/page.h index 9d129a2a1351..059aff38f10a 100644 --- a/arch/arc/include/uapi/asm/page.h +++ b/arch/arc/include/uapi/asm/page.h @@ -9,6 +9,8 @@ #ifndef _UAPI__ASM_ARC_PAGE_H #define _UAPI__ASM_ARC_PAGE_H +#include <linux/const.h> + /* PAGE_SHIFT determines the page size */ #if defined(CONFIG_ARC_PAGE_SIZE_16K) #define PAGE_SHIFT 14 @@ -25,13 +27,8 @@ #define PAGE_SHIFT 13 #endif -#ifdef __ASSEMBLY__ -#define PAGE_SIZE (1 << PAGE_SHIFT) -#define PAGE_OFFSET (0x80000000) -#else -#define PAGE_SIZE (1UL << PAGE_SHIFT) /* Default 8K */ -#define PAGE_OFFSET (0x80000000UL) /* Kernel starts at 2G onwards */ -#endif +#define PAGE_SIZE _BITUL(PAGE_SHIFT) /* Default 8K */ +#define PAGE_OFFSET _AC(0x80000000, UL) /* Kernel starts at 2G onwrds */ #define PAGE_MASK (~(PAGE_SIZE-1)) diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S index 8fa76567e402..445e63a10754 100644 --- a/arch/arc/kernel/entry-arcv2.S +++ b/arch/arc/kernel/entry-arcv2.S @@ -24,7 +24,7 @@ .align 4 # Initial 16 slots are Exception Vectors -VECTOR stext ; Restart Vector (jump to entry point) +VECTOR res_service ; Reset Vector VECTOR mem_service ; Mem exception VECTOR instr_service ; Instrn Error VECTOR EV_MachineCheck ; Fatal Machine check diff --git a/arch/arc/kernel/entry-compact.S b/arch/arc/kernel/entry-compact.S index 15d457b4403a..59f52035b4ea 100644 --- a/arch/arc/kernel/entry-compact.S +++ b/arch/arc/kernel/entry-compact.S @@ -86,7 +86,7 @@ */ ; ********* Critical System Events ********************** -VECTOR res_service ; 0x0, Restart Vector (0x0) +VECTOR res_service ; 0x0, Reset Vector (0x0) VECTOR mem_service ; 0x8, Mem exception (0x1) VECTOR instr_service ; 0x10, Instrn Error (0x2) @@ -155,13 +155,9 @@ int2_saved_reg: ; --------------------------------------------- .section .text, "ax",@progbits -res_service: ; processor restart - flag 0x1 ; not implemented - nop - nop -reserved: ; processor restart - rtie ; jump to processor initializations +reserved: + flag 1 ; Unexpected event, halt ;##################### Interrupt Handling ############################## @@ -175,12 +171,25 @@ ENTRY(handle_interrupt_level2) ;------------------------------------------------------ ; if L2 IRQ interrupted a L1 ISR, disable preemption + ; + ; This is to avoid a potential L1-L2-L1 scenario + ; -L1 IRQ taken + ; -L2 interrupts L1 (before L1 ISR could run) + ; -preemption off IRQ, user task in syscall picked to run + ; -RTIE to userspace + ; Returns from L2 context fine + ; But both L1 and L2 re-enabled, so another L1 can be taken + ; while prev L1 is still unserviced + ; ;------------------------------------------------------ + ; L2 interrupting L1 implies both L2 and L1 active + ; However both A2 and A1 are NOT set in STATUS32, thus + ; need to check STATUS32_L2 to determine if L1 was active + ld r9, [sp, PT_status32] ; get statu32_l2 (saved in pt_regs) bbit0 r9, STATUS_A1_BIT, 1f ; L1 not active when L2 IRQ, so normal - ; A1 is set in status32_l2 ; bump thread_info->preempt_count (Disable preemption) GET_CURR_THR_INFO_FROM_SP r10 ld r9, [r10, THREAD_INFO_PREEMPT_COUNT] @@ -320,11 +329,10 @@ END(call_do_page_fault) ; Note that we use realtime STATUS32 (not pt_regs->status32) to ; decide that. - ; if Returning from Exception - btst r10, STATUS_AE_BIT - bnz .Lexcep_ret + and.f 0, r10, (STATUS_A1_MASK|STATUS_A2_MASK) + bz .Lexcep_or_pure_K_ret - ; Not Exception so maybe Interrupts (Level 1 or 2) + ; Returning from Interrupts (Level 1 or 2) #ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS @@ -365,8 +373,7 @@ END(call_do_page_fault) st r9, [r10, THREAD_INFO_PREEMPT_COUNT] 149: - ;return from level 2 - INTERRUPT_EPILOGUE 2 + INTERRUPT_EPILOGUE 2 ; return from level 2 interrupt debug_marker_l2: rtie @@ -374,15 +381,11 @@ not_level2_interrupt: #endif - bbit0 r10, STATUS_A1_BIT, .Lpure_k_mode_ret - - ;return from level 1 - INTERRUPT_EPILOGUE 1 + INTERRUPT_EPILOGUE 1 ; return from level 1 interrupt debug_marker_l1: rtie -.Lexcep_ret: -.Lpure_k_mode_ret: +.Lexcep_or_pure_K_ret: ;this case is for syscalls or Exceptions or pure kernel mode diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S index 812f95e6ae69..689dd867fdff 100644 --- a/arch/arc/kernel/head.S +++ b/arch/arc/kernel/head.S @@ -50,28 +50,37 @@ .endm .section .init.text, "ax",@progbits - .type stext, @function - .globl stext -stext: - ;------------------------------------------------------------------- - ; Don't clobber r0-r2 yet. It might have bootloader provided info - ;------------------------------------------------------------------- + +;---------------------------------------------------------------- +; Default Reset Handler (jumped into from Reset vector) +; - Don't clobber r0,r1,r2 as they might have u-boot provided args +; - Platforms can override this weak version if needed +;---------------------------------------------------------------- +WEAK(res_service) + j stext +END(res_service) + +;---------------------------------------------------------------- +; Kernel Entry point +;---------------------------------------------------------------- +ENTRY(stext) CPU_EARLY_SETUP #ifdef CONFIG_SMP - ; Ensure Boot (Master) proceeds. Others wait in platform dependent way - ; IDENTITY Reg [ 3 2 1 0 ] - ; (cpu-id) ^^^ => Zero for UP ARC700 - ; => #Core-ID if SMP (Master 0) - ; Note that non-boot CPUs might not land here if halt-on-reset and - ; instead breath life from @first_lines_of_secondary, but we still - ; need to make sure only boot cpu takes this path. GET_CPU_ID r5 cmp r5, 0 - mov.ne r0, r5 - jne arc_platform_smp_wait_to_boot + mov.nz r0, r5 +#ifdef CONFIG_ARC_SMP_HALT_ON_RESET + ; Non-Master can proceed as system would be booted sufficiently + jnz first_lines_of_secondary +#else + ; Non-Masters wait for Master to boot enough and bring them up + jnz arc_platform_smp_wait_to_boot #endif + ; Master falls thru +#endif + ; Clear BSS before updating any globals ; XXX: use ZOL here mov r5, __bss_start @@ -102,18 +111,14 @@ stext: GET_TSK_STACK_BASE r9, sp ; r9 = tsk, sp = stack base(output) j start_kernel ; "C" entry point +END(stext) #ifdef CONFIG_SMP ;---------------------------------------------------------------- ; First lines of code run by secondary before jumping to 'C' ;---------------------------------------------------------------- .section .text, "ax",@progbits - .type first_lines_of_secondary, @function - .globl first_lines_of_secondary - -first_lines_of_secondary: - - CPU_EARLY_SETUP +ENTRY(first_lines_of_secondary) ; setup per-cpu idle task as "current" on this CPU ld r0, [@secondary_idle_tsk] @@ -126,5 +131,5 @@ first_lines_of_secondary: GET_TSK_STACK_BASE r0, sp j start_kernel_secondary - +END(first_lines_of_secondary) #endif diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c index 039fac30b5c1..06bcedf19b62 100644 --- a/arch/arc/kernel/intc-compact.c +++ b/arch/arc/kernel/intc-compact.c @@ -79,17 +79,16 @@ static struct irq_chip onchip_intc = { static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) { - /* - * XXX: the IPI IRQ needs to be handled like TIMER too. However ARC core - * code doesn't own it (like TIMER0). ISS IDU / ezchip define it - * in platform header which can't be included here as it goes - * against multi-platform image philisophy - */ - if (irq == TIMER0_IRQ) + switch (irq) { + case TIMER0_IRQ: +#ifdef CONFIG_SMP + case IPI_IRQ: +#endif irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq); - else + break; + default: irq_set_chip_and_handler(irq, &onchip_intc, handle_level_irq); - + } return 0; } @@ -148,78 +147,15 @@ IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ); void arch_local_irq_enable(void) { - unsigned long flags = arch_local_save_flags(); - /* Allow both L1 and L2 at the onset */ - flags |= (STATUS_E1_MASK | STATUS_E2_MASK); - - /* Called from hard ISR (between irq_enter and irq_exit) */ - if (in_irq()) { - - /* If in L2 ISR, don't re-enable any further IRQs as this can - * cause IRQ priorities to get upside down. e.g. it could allow - * L1 be taken while in L2 hard ISR which is wrong not only in - * theory, it can also cause the dreaded L1-L2-L1 scenario - */ - if (flags & STATUS_A2_MASK) - flags &= ~(STATUS_E1_MASK | STATUS_E2_MASK); - - /* Even if in L1 ISR, allowe Higher prio L2 IRQs */ - else if (flags & STATUS_A1_MASK) - flags &= ~(STATUS_E1_MASK); - } - - /* called from soft IRQ, ideally we want to re-enable all levels */ - - else if (in_softirq()) { - - /* However if this is case of L1 interrupted by L2, - * re-enabling both may cause whaco L1-L2-L1 scenario - * because ARC700 allows level 1 to interrupt an active L2 ISR - * Thus we disable both - * However some code, executing in soft ISR wants some IRQs - * to be enabled so we re-enable L2 only - * - * How do we determine L1 intr by L2 - * -A2 is set (means in L2 ISR) - * -E1 is set in this ISR's pt_regs->status32 which is - * saved copy of status32_l2 when l2 ISR happened - */ - struct pt_regs *pt = get_irq_regs(); - - if ((flags & STATUS_A2_MASK) && pt && - (pt->status32 & STATUS_A1_MASK)) { - /*flags &= ~(STATUS_E1_MASK | STATUS_E2_MASK); */ - flags &= ~(STATUS_E1_MASK); - } - } + if (flags & STATUS_A2_MASK) + flags |= STATUS_E2_MASK; + else if (flags & STATUS_A1_MASK) + flags |= STATUS_E1_MASK; arch_local_irq_restore(flags); } -#else /* ! CONFIG_ARC_COMPACT_IRQ_LEVELS */ - -/* - * Simpler version for only 1 level of interrupt - * Here we only Worry about Level 1 Bits - */ -void arch_local_irq_enable(void) -{ - unsigned long flags; - - /* - * ARC IDE Drivers tries to re-enable interrupts from hard-isr - * context which is simply wrong - */ - if (in_irq()) { - WARN_ONCE(1, "IRQ enabled from hard-isr"); - return; - } - - flags = arch_local_save_flags(); - flags |= (STATUS_E1_MASK | STATUS_E2_MASK); - arch_local_irq_restore(flags); -} -#endif EXPORT_SYMBOL(arch_local_irq_enable); +#endif diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 2989a7bcf8a8..2ee226546c6a 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -10,6 +10,7 @@ #include <linux/interrupt.h> #include <linux/irqchip.h> #include <asm/mach_desc.h> +#include <asm/smp.h> /* * Late Interrupt system init called from start_kernel for Boot CPU only @@ -19,17 +20,20 @@ */ void __init init_IRQ(void) { - /* Any external intc can be setup here */ - if (machine_desc->init_irq) - machine_desc->init_irq(); - - /* process the entire interrupt tree in one go */ + /* + * process the entire interrupt tree in one go + * Any external intc will be setup provided DT chains them + * properly + */ irqchip_init(); #ifdef CONFIG_SMP - /* Master CPU can initialize it's side of IPI */ - if (machine_desc->init_smp) - machine_desc->init_smp(smp_processor_id()); + /* a SMP H/w block could do IPI IRQ request here */ + if (plat_smp_ops.init_irq_cpu) + plat_smp_ops.init_irq_cpu(smp_processor_id()); + + if (machine_desc->init_cpu_smp) + machine_desc->init_cpu_smp(smp_processor_id()); #endif } diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index 4ffd1855f1bd..74a9b074ac3e 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -12,20 +12,14 @@ #include <linux/irq.h> #include <linux/spinlock.h> #include <asm/mcip.h> +#include <asm/setup.h> static char smp_cpuinfo_buf[128]; static int idu_detected; static DEFINE_RAW_SPINLOCK(mcip_lock); -/* - * Any SMP specific init any CPU does when it comes up. - * Here we setup the CPU to enable Inter-Processor-Interrupts - * Called for each CPU - * -Master : init_IRQ() - * -Other(s) : start_kernel_secondary() - */ -void mcip_init_smp(unsigned int cpu) +static void mcip_setup_per_cpu(int cpu) { smp_ipi_irq_setup(cpu, IPI_IRQ); } @@ -96,34 +90,8 @@ static void mcip_ipi_clear(int irq) #endif } -volatile int wake_flag; - -static void mcip_wakeup_cpu(int cpu, unsigned long pc) -{ - BUG_ON(cpu == 0); - wake_flag = cpu; -} - -void arc_platform_smp_wait_to_boot(int cpu) +static void mcip_probe_n_setup(void) { - while (wake_flag != cpu) - ; - - wake_flag = 0; - __asm__ __volatile__("j @first_lines_of_secondary \n"); -} - -struct plat_smp_ops plat_smp_ops = { - .info = smp_cpuinfo_buf, - .cpu_kick = mcip_wakeup_cpu, - .ipi_send = mcip_ipi_send, - .ipi_clear = mcip_ipi_clear, -}; - -void mcip_init_early_smp(void) -{ -#define IS_AVAIL1(var, str) ((var) ? str : "") - struct mcip_bcr { #ifdef CONFIG_CPU_BIG_ENDIAN unsigned int pad3:8, @@ -161,6 +129,14 @@ void mcip_init_early_smp(void) panic("kernel trying to use non-existent GRTC\n"); } +struct plat_smp_ops plat_smp_ops = { + .info = smp_cpuinfo_buf, + .init_early_smp = mcip_probe_n_setup, + .init_irq_cpu = mcip_setup_per_cpu, + .ipi_send = mcip_ipi_send, + .ipi_clear = mcip_ipi_clear, +}; + /*************************************************************************** * ARCv2 Interrupt Distribution Unit (IDU) * diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index cabde9dc0696..c33e77c0ad3e 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -160,10 +160,6 @@ static const struct cpuinfo_data arc_cpu_tbl[] = { { {0x00, NULL } } }; -#define IS_AVAIL1(v, s) ((v) ? s : "") -#define IS_USED_RUN(v) ((v) ? "" : "(not used) ") -#define IS_USED_CFG(cfg) IS_USED_RUN(IS_ENABLED(cfg)) -#define IS_AVAIL2(v, s, cfg) IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg)) static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len) { @@ -415,8 +411,9 @@ void __init setup_arch(char **cmdline_p) if (machine_desc->init_early) machine_desc->init_early(); - setup_processor(); smp_init_cpus(); + + setup_processor(); setup_arch_memory(); /* copy flat DT out of .init and then unflatten it */ diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index be13d12420ba..580587805fa3 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -42,8 +42,13 @@ void __init smp_prepare_boot_cpu(void) } /* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. + * Called from setup_arch() before calling setup_processor() + * + * - Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + * - Call early smp init hook. This can initialize a specific multi-core + * IP which is say common to several platforms (hence not part of + * platform specific int_early() hook) */ void __init smp_init_cpus(void) { @@ -51,6 +56,9 @@ void __init smp_init_cpus(void) for (i = 0; i < NR_CPUS; i++) set_cpu_possible(i, true); + + if (plat_smp_ops.init_early_smp) + plat_smp_ops.init_early_smp(); } /* called from init ( ) => process 1 */ @@ -72,35 +80,29 @@ void __init smp_cpus_done(unsigned int max_cpus) } /* - * After power-up, a non Master CPU needs to wait for Master to kick start it - * - * The default implementation halts - * - * This relies on platform specific support allowing Master to directly set - * this CPU's PC (to be @first_lines_of_secondary() and kick start it. - * - * In lack of such h/w assist, platforms can override this function - * - make this function busy-spin on a token, eventually set by Master - * (from arc_platform_smp_wakeup_cpu()) - * - Once token is available, jump to @first_lines_of_secondary - * (using inline asm). - * - * Alert: can NOT use stack here as it has not been determined/setup for CPU. - * If it turns out to be elaborate, it's better to code it in assembly - * + * Default smp boot helper for Run-on-reset case where all cores start off + * together. Non-masters need to wait for Master to start running. + * This is implemented using a flag in memory, which Non-masters spin-wait on. + * Master sets it to cpu-id of core to "ungate" it. */ -void __weak arc_platform_smp_wait_to_boot(int cpu) +static volatile int wake_flag; + +static void arc_default_smp_cpu_kick(int cpu, unsigned long pc) { - /* - * As a hack for debugging - since debugger will single-step over the - * FLAG insn - wrap the halt itself it in a self loop - */ - __asm__ __volatile__( - "1: \n" - " flag 1 \n" - " b 1b \n"); + BUG_ON(cpu == 0); + wake_flag = cpu; +} + +void arc_platform_smp_wait_to_boot(int cpu) +{ + while (wake_flag != cpu) + ; + + wake_flag = 0; + __asm__ __volatile__("j @first_lines_of_secondary \n"); } + const char *arc_platform_smp_cpuinfo(void) { return plat_smp_ops.info ? : ""; @@ -129,8 +131,12 @@ void start_kernel_secondary(void) pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu); - if (machine_desc->init_smp) - machine_desc->init_smp(cpu); + /* Some SMP H/w setup - for each cpu */ + if (plat_smp_ops.init_irq_cpu) + plat_smp_ops.init_irq_cpu(cpu); + + if (machine_desc->init_cpu_smp) + machine_desc->init_cpu_smp(cpu); arc_local_timer_setup(); @@ -161,6 +167,8 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) if (plat_smp_ops.cpu_kick) plat_smp_ops.cpu_kick(cpu, (unsigned long)first_lines_of_secondary); + else + arc_default_smp_cpu_kick(cpu, (unsigned long)NULL); /* wait for 1 sec after kicking the secondary */ wait_till = jiffies + HZ; diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index 4294761a2b3e..dfad287f1db1 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -285,7 +285,4 @@ void __init time_init(void) /* sets up the periodic event timer */ arc_local_timer_setup(); - - if (machine_desc->init_time) - machine_desc->init_time(); } diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S index dd35bde39f69..894e696bddaa 100644 --- a/arch/arc/kernel/vmlinux.lds.S +++ b/arch/arc/kernel/vmlinux.lds.S @@ -12,7 +12,7 @@ #include <asm/thread_info.h> OUTPUT_ARCH(arc) -ENTRY(_stext) +ENTRY(res_service) #ifdef CONFIG_CPU_BIG_ENDIAN jiffies = jiffies_64 + 4; diff --git a/arch/arc/mm/Makefile b/arch/arc/mm/Makefile index 7beb941556c3..3703a4969349 100644 --- a/arch/arc/mm/Makefile +++ b/arch/arc/mm/Makefile @@ -8,3 +8,4 @@ obj-y := extable.o ioremap.o dma.o fault.o init.o obj-y += tlb.o tlbex.o cache.o mmap.o +obj-$(CONFIG_HIGHMEM) += highmem.o diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 0d1a6e96839f..ff7ff6cbb811 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -25,7 +25,7 @@ static int l2_line_sz; int ioc_exists; volatile int slc_enable = 1, ioc_enable = 1; -void (*_cache_line_loop_ic_fn)(unsigned long paddr, unsigned long vaddr, +void (*_cache_line_loop_ic_fn)(phys_addr_t paddr, unsigned long vaddr, unsigned long sz, const int cacheop); void (*__dma_cache_wback_inv)(unsigned long start, unsigned long sz); @@ -37,7 +37,6 @@ char *arc_cache_mumbojumbo(int c, char *buf, int len) int n = 0; struct cpuinfo_arc_cache *p; -#define IS_USED_RUN(v) ((v) ? "" : "(disabled) ") #define PR_CACHE(p, cfg, str) \ if (!(p)->ver) \ n += scnprintf(buf + n, len - n, str"\t\t: N/A\n"); \ @@ -47,7 +46,7 @@ char *arc_cache_mumbojumbo(int c, char *buf, int len) (p)->sz_k, (p)->assoc, (p)->line_len, \ (p)->vipt ? "VIPT" : "PIPT", \ (p)->alias ? " aliasing" : "", \ - IS_ENABLED(cfg) ? "" : " (not used)"); + IS_USED_CFG(cfg)); PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache"); PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache"); @@ -63,7 +62,7 @@ char *arc_cache_mumbojumbo(int c, char *buf, int len) if (ioc_exists) n += scnprintf(buf + n, len - n, "IOC\t\t:%s\n", - IS_USED_RUN(ioc_enable)); + IS_DISABLED_RUN(ioc_enable)); return buf; } @@ -217,7 +216,7 @@ slc_chk: */ static inline -void __cache_line_loop_v2(unsigned long paddr, unsigned long vaddr, +void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr, unsigned long sz, const int op) { unsigned int aux_cmd; @@ -254,8 +253,12 @@ void __cache_line_loop_v2(unsigned long paddr, unsigned long vaddr, } } +/* + * For ARC700 MMUv3 I-cache and D-cache flushes + * Also reused for HS38 aliasing I-cache configuration + */ static inline -void __cache_line_loop_v3(unsigned long paddr, unsigned long vaddr, +void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr, unsigned long sz, const int op) { unsigned int aux_cmd, aux_tag; @@ -290,6 +293,16 @@ void __cache_line_loop_v3(unsigned long paddr, unsigned long vaddr, if (full_page) write_aux_reg(aux_tag, paddr); + /* + * This is technically for MMU v4, using the MMU v3 programming model + * Special work for HS38 aliasing I-cache configuratino with PAE40 + * - upper 8 bits of paddr need to be written into PTAG_HI + * - (and needs to be written before the lower 32 bits) + * Note that PTAG_HI is hoisted outside the line loop + */ + if (is_pae40_enabled() && op == OP_INV_IC) + write_aux_reg(ARC_REG_IC_PTAG_HI, (u64)paddr >> 32); + while (num_lines-- > 0) { if (!full_page) { write_aux_reg(aux_tag, paddr); @@ -302,14 +315,20 @@ void __cache_line_loop_v3(unsigned long paddr, unsigned long vaddr, } /* - * In HS38x (MMU v4), although icache is VIPT, only paddr is needed for cache - * maintenance ops (in IVIL reg), as long as icache doesn't alias. + * In HS38x (MMU v4), I-cache is VIPT (can alias), D-cache is PIPT + * Here's how cache ops are implemented + * + * - D-cache: only paddr needed (in DC_IVDL/DC_FLDL) + * - I-cache Non Aliasing: Despite VIPT, only paddr needed (in IC_IVIL) + * - I-cache Aliasing: Both vaddr and paddr needed (in IC_IVIL, IC_PTAG + * respectively, similar to MMU v3 programming model, hence + * __cache_line_loop_v3() is used) * - * For Aliasing icache, vaddr is also needed (in IVIL), while paddr is - * specified in PTAG (similar to MMU v3) + * If PAE40 is enabled, independent of aliasing considerations, the higher bits + * needs to be written into PTAG_HI */ static inline -void __cache_line_loop_v4(unsigned long paddr, unsigned long vaddr, +void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr, unsigned long sz, const int cacheop) { unsigned int aux_cmd; @@ -336,6 +355,22 @@ void __cache_line_loop_v4(unsigned long paddr, unsigned long vaddr, num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES); + /* + * For HS38 PAE40 configuration + * - upper 8 bits of paddr need to be written into PTAG_HI + * - (and needs to be written before the lower 32 bits) + */ + if (is_pae40_enabled()) { + if (cacheop == OP_INV_IC) + /* + * Non aliasing I-cache in HS38, + * aliasing I-cache handled in __cache_line_loop_v3() + */ + write_aux_reg(ARC_REG_IC_PTAG_HI, (u64)paddr >> 32); + else + write_aux_reg(ARC_REG_DC_PTAG_HI, (u64)paddr >> 32); + } + while (num_lines-- > 0) { write_aux_reg(aux_cmd, paddr); paddr += L1_CACHE_BYTES; @@ -413,7 +448,7 @@ static inline void __dc_entire_op(const int op) /* * D-Cache Line ops: Per Line INV (discard or wback+discard) or FLUSH (wback) */ -static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr, +static inline void __dc_line_op(phys_addr_t paddr, unsigned long vaddr, unsigned long sz, const int op) { unsigned long flags; @@ -446,7 +481,7 @@ static inline void __ic_entire_inv(void) } static inline void -__ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr, +__ic_line_inv_vaddr_local(phys_addr_t paddr, unsigned long vaddr, unsigned long sz) { unsigned long flags; @@ -463,7 +498,7 @@ __ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr, #else struct ic_inv_args { - unsigned long paddr, vaddr; + phys_addr_t paddr, vaddr; int sz; }; @@ -474,7 +509,7 @@ static void __ic_line_inv_vaddr_helper(void *info) __ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz); } -static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr, +static void __ic_line_inv_vaddr(phys_addr_t paddr, unsigned long vaddr, unsigned long sz) { struct ic_inv_args ic_inv = { @@ -495,7 +530,7 @@ static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr, #endif /* CONFIG_ARC_HAS_ICACHE */ -noinline void slc_op(unsigned long paddr, unsigned long sz, const int op) +noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op) { #ifdef CONFIG_ISA_ARCV2 /* @@ -585,7 +620,7 @@ void flush_dcache_page(struct page *page) } else if (page_mapped(page)) { /* kernel reading from page with U-mapping */ - unsigned long paddr = (unsigned long)page_address(page); + phys_addr_t paddr = (unsigned long)page_address(page); unsigned long vaddr = page->index << PAGE_CACHE_SHIFT; if (addr_not_cache_congruent(paddr, vaddr)) @@ -733,14 +768,14 @@ EXPORT_SYMBOL(flush_icache_range); * builtin kernel page will not have any virtual mappings. * kprobe on loadable module will be kernel vaddr. */ -void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len) +void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len) { __dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV); __ic_line_inv_vaddr(paddr, vaddr, len); } /* wrapper to compile time eliminate alignment checks in flush loop */ -void __inv_icache_page(unsigned long paddr, unsigned long vaddr) +void __inv_icache_page(phys_addr_t paddr, unsigned long vaddr) { __ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE); } @@ -749,7 +784,7 @@ void __inv_icache_page(unsigned long paddr, unsigned long vaddr) * wrapper to clearout kernel or userspace mappings of a page * For kernel mappings @vaddr == @paddr */ -void __flush_dcache_page(unsigned long paddr, unsigned long vaddr) +void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr) { __dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV); } @@ -807,8 +842,8 @@ void flush_anon_page(struct vm_area_struct *vma, struct page *page, void copy_user_highpage(struct page *to, struct page *from, unsigned long u_vaddr, struct vm_area_struct *vma) { - unsigned long kfrom = (unsigned long)page_address(from); - unsigned long kto = (unsigned long)page_address(to); + void *kfrom = kmap_atomic(from); + void *kto = kmap_atomic(to); int clean_src_k_mappings = 0; /* @@ -818,13 +853,16 @@ void copy_user_highpage(struct page *to, struct page *from, * * Note that while @u_vaddr refers to DST page's userspace vaddr, it is * equally valid for SRC page as well + * + * For !VIPT cache, all of this gets compiled out as + * addr_not_cache_congruent() is 0 */ if (page_mapped(from) && addr_not_cache_congruent(kfrom, u_vaddr)) { - __flush_dcache_page(kfrom, u_vaddr); + __flush_dcache_page((unsigned long)kfrom, u_vaddr); clean_src_k_mappings = 1; } - copy_page((void *)kto, (void *)kfrom); + copy_page(kto, kfrom); /* * Mark DST page K-mapping as dirty for a later finalization by @@ -841,11 +879,14 @@ void copy_user_highpage(struct page *to, struct page *from, * sync the kernel mapping back to physical page */ if (clean_src_k_mappings) { - __flush_dcache_page(kfrom, kfrom); + __flush_dcache_page((unsigned long)kfrom, (unsigned long)kfrom); set_bit(PG_dc_clean, &from->flags); } else { clear_bit(PG_dc_clean, &from->flags); } + + kunmap_atomic(kto); + kunmap_atomic(kfrom); } void clear_user_page(void *to, unsigned long u_vaddr, struct page *page) diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c index d948e4e9d89c..af63f4a13e60 100644 --- a/arch/arc/mm/fault.c +++ b/arch/arc/mm/fault.c @@ -18,7 +18,14 @@ #include <asm/pgalloc.h> #include <asm/mmu.h> -static int handle_vmalloc_fault(unsigned long address) +/* + * kernel virtual address is required to implement vmalloc/pkmap/fixmap + * Refer to asm/processor.h for System Memory Map + * + * It simply copies the PMD entry (pointer to 2nd level page table or hugepage) + * from swapper pgdir to task pgdir. The 2nd level table/page is thus shared + */ +noinline static int handle_kernel_vaddr_fault(unsigned long address) { /* * Synchronize this task's top level page-table @@ -72,8 +79,8 @@ void do_page_fault(unsigned long address, struct pt_regs *regs) * only copy the information from the master page table, * nothing more. */ - if (address >= VMALLOC_START && address <= VMALLOC_END) { - ret = handle_vmalloc_fault(address); + if (address >= VMALLOC_START) { + ret = handle_kernel_vaddr_fault(address); if (unlikely(ret)) goto bad_area_nosemaphore; else diff --git a/arch/arc/mm/highmem.c b/arch/arc/mm/highmem.c new file mode 100644 index 000000000000..065ee6bfa82a --- /dev/null +++ b/arch/arc/mm/highmem.c @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2015 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/bootmem.h> +#include <linux/export.h> +#include <linux/highmem.h> +#include <asm/processor.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> +#include <asm/tlbflush.h> + +/* + * HIGHMEM API: + * + * kmap() API provides sleep semantics hence refered to as "permanent maps" + * It allows mapping LAST_PKMAP pages, using @last_pkmap_nr as the cursor + * for book-keeping + * + * kmap_atomic() can't sleep (calls pagefault_disable()), thus it provides + * shortlived ala "temporary mappings" which historically were implemented as + * fixmaps (compile time addr etc). Their book-keeping is done per cpu. + * + * Both these facts combined (preemption disabled and per-cpu allocation) + * means the total number of concurrent fixmaps will be limited to max + * such allocations in a single control path. Thus KM_TYPE_NR (another + * historic relic) is a small'ish number which caps max percpu fixmaps + * + * ARC HIGHMEM Details + * + * - the kernel vaddr space from 0x7z to 0x8z (currently used by vmalloc/module) + * is now shared between vmalloc and kmap (non overlapping though) + * + * - Both fixmap/pkmap use a dedicated page table each, hooked up to swapper PGD + * This means each only has 1 PGDIR_SIZE worth of kvaddr mappings, which means + * 2M of kvaddr space for typical config (8K page and 11:8:13 traversal split) + * + * - fixmap anyhow needs a limited number of mappings. So 2M kvaddr == 256 PTE + * slots across NR_CPUS would be more than sufficient (generic code defines + * KM_TYPE_NR as 20). + * + * - pkmap being preemptible, in theory could do with more than 256 concurrent + * mappings. However, generic pkmap code: map_new_virtual(), doesn't traverse + * the PGD and only works with a single page table @pkmap_page_table, hence + * sets the limit + */ + +extern pte_t * pkmap_page_table; +static pte_t * fixmap_page_table; + +void *kmap(struct page *page) +{ + BUG_ON(in_interrupt()); + if (!PageHighMem(page)) + return page_address(page); + + return kmap_high(page); +} + +void *kmap_atomic(struct page *page) +{ + int idx, cpu_idx; + unsigned long vaddr; + + preempt_disable(); + pagefault_disable(); + if (!PageHighMem(page)) + return page_address(page); + + cpu_idx = kmap_atomic_idx_push(); + idx = cpu_idx + KM_TYPE_NR * smp_processor_id(); + vaddr = FIXMAP_ADDR(idx); + + set_pte_at(&init_mm, vaddr, fixmap_page_table + idx, + mk_pte(page, kmap_prot)); + + return (void *)vaddr; +} +EXPORT_SYMBOL(kmap_atomic); + +void __kunmap_atomic(void *kv) +{ + unsigned long kvaddr = (unsigned long)kv; + + if (kvaddr >= FIXMAP_BASE && kvaddr < (FIXMAP_BASE + FIXMAP_SIZE)) { + + /* + * Because preemption is disabled, this vaddr can be associated + * with the current allocated index. + * But in case of multiple live kmap_atomic(), it still relies on + * callers to unmap in right order. + */ + int cpu_idx = kmap_atomic_idx(); + int idx = cpu_idx + KM_TYPE_NR * smp_processor_id(); + + WARN_ON(kvaddr != FIXMAP_ADDR(idx)); + + pte_clear(&init_mm, kvaddr, fixmap_page_table + idx); + local_flush_tlb_kernel_range(kvaddr, kvaddr + PAGE_SIZE); + + kmap_atomic_idx_pop(); + } + + pagefault_enable(); + preempt_enable(); +} +EXPORT_SYMBOL(__kunmap_atomic); + +noinline pte_t *alloc_kmap_pgtable(unsigned long kvaddr) +{ + pgd_t *pgd_k; + pud_t *pud_k; + pmd_t *pmd_k; + pte_t *pte_k; + + pgd_k = pgd_offset_k(kvaddr); + pud_k = pud_offset(pgd_k, kvaddr); + pmd_k = pmd_offset(pud_k, kvaddr); + + pte_k = (pte_t *)alloc_bootmem_low_pages(PAGE_SIZE); + pmd_populate_kernel(&init_mm, pmd_k, pte_k); + return pte_k; +} + +void kmap_init(void) +{ + /* Due to recursive include hell, we can't do this in processor.h */ + BUILD_BUG_ON(PAGE_OFFSET < (VMALLOC_END + FIXMAP_SIZE + PKMAP_SIZE)); + + BUILD_BUG_ON(KM_TYPE_NR > PTRS_PER_PTE); + pkmap_page_table = alloc_kmap_pgtable(PKMAP_BASE); + + BUILD_BUG_ON(LAST_PKMAP > PTRS_PER_PTE); + fixmap_page_table = alloc_kmap_pgtable(FIXMAP_BASE); +} diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index d44eedd8c322..a9305b5a2cd4 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -15,6 +15,7 @@ #endif #include <linux/swap.h> #include <linux/module.h> +#include <linux/highmem.h> #include <asm/page.h> #include <asm/pgalloc.h> #include <asm/sections.h> @@ -24,16 +25,22 @@ pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE); char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE); EXPORT_SYMBOL(empty_zero_page); -/* Default tot mem from .config */ -static unsigned long arc_mem_sz = 0x20000000; /* some default */ +static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE; +static unsigned long low_mem_sz; + +#ifdef CONFIG_HIGHMEM +static unsigned long min_high_pfn; +static u64 high_mem_start; +static u64 high_mem_sz; +#endif /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */ static int __init setup_mem_sz(char *str) { - arc_mem_sz = memparse(str, NULL) & PAGE_MASK; + low_mem_sz = memparse(str, NULL) & PAGE_MASK; /* early console might not be setup yet - it will show up later */ - pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(arc_mem_sz)); + pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz)); return 0; } @@ -41,8 +48,22 @@ early_param("mem", setup_mem_sz); void __init early_init_dt_add_memory_arch(u64 base, u64 size) { - arc_mem_sz = size & PAGE_MASK; - pr_info("Memory size set via devicetree %ldM\n", TO_MB(arc_mem_sz)); + int in_use = 0; + + if (!low_mem_sz) { + BUG_ON(base != low_mem_start); + low_mem_sz = size; + in_use = 1; + } else { +#ifdef CONFIG_HIGHMEM + high_mem_start = base; + high_mem_sz = size; + in_use = 1; +#endif + } + + pr_info("Memory @ %llx [%lldM] %s\n", + base, TO_MB(size), !in_use ? "Not used":""); } #ifdef CONFIG_BLK_DEV_INITRD @@ -72,46 +93,62 @@ early_param("initrd", early_initrd); void __init setup_arch_memory(void) { unsigned long zones_size[MAX_NR_ZONES]; - unsigned long end_mem = CONFIG_LINUX_LINK_BASE + arc_mem_sz; + unsigned long zones_holes[MAX_NR_ZONES]; init_mm.start_code = (unsigned long)_text; init_mm.end_code = (unsigned long)_etext; init_mm.end_data = (unsigned long)_edata; init_mm.brk = (unsigned long)_end; - /* - * We do it here, so that memory is correctly instantiated - * even if "mem=xxx" cmline over-ride is given and/or - * DT has memory node. Each causes an update to @arc_mem_sz - * and we finally add memory one here - */ - memblock_add(CONFIG_LINUX_LINK_BASE, arc_mem_sz); - - /*------------- externs in mm need setting up ---------------*/ - /* first page of system - kernel .vector starts here */ min_low_pfn = ARCH_PFN_OFFSET; - /* Last usable page of low mem (no HIGHMEM yet for ARC port) */ - max_low_pfn = max_pfn = PFN_DOWN(end_mem); + /* Last usable page of low mem */ + max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz); - max_mapnr = max_low_pfn - min_low_pfn; +#ifdef CONFIG_HIGHMEM + min_high_pfn = PFN_DOWN(high_mem_start); + max_pfn = PFN_DOWN(high_mem_start + high_mem_sz); +#endif + + max_mapnr = max_pfn - min_low_pfn; - /*------------- reserve kernel image -----------------------*/ - memblock_reserve(CONFIG_LINUX_LINK_BASE, - __pa(_end) - CONFIG_LINUX_LINK_BASE); + /*------------- bootmem allocator setup -----------------------*/ + + /* + * seed the bootmem allocator after any DT memory node parsing or + * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz + * + * Only low mem is added, otherwise we have crashes when allocating + * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of + * avail memory, ending in highmem with a > 32-bit address. However + * it then tries to memset it with a truncaed 32-bit handle, causing + * the crash + */ + + memblock_add(low_mem_start, low_mem_sz); + memblock_reserve(low_mem_start, __pa(_end) - low_mem_start); #ifdef CONFIG_BLK_DEV_INITRD - /*------------- reserve initrd image -----------------------*/ if (initrd_start) memblock_reserve(__pa(initrd_start), initrd_end - initrd_start); #endif memblock_dump_all(); - /*-------------- node setup --------------------------------*/ + /*----------------- node/zones setup --------------------------*/ memset(zones_size, 0, sizeof(zones_size)); - zones_size[ZONE_NORMAL] = max_mapnr; + memset(zones_holes, 0, sizeof(zones_holes)); + + zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn; + zones_holes[ZONE_NORMAL] = 0; + +#ifdef CONFIG_HIGHMEM + zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn; + + /* This handles the peripheral address space hole */ + zones_holes[ZONE_HIGHMEM] = min_high_pfn - max_low_pfn; +#endif /* * We can't use the helper free_area_init(zones[]) because it uses @@ -122,9 +159,12 @@ void __init setup_arch_memory(void) free_area_init_node(0, /* node-id */ zones_size, /* num pages per zone */ min_low_pfn, /* first pfn of node */ - NULL); /* NO holes */ + zones_holes); /* holes */ - high_memory = (void *)end_mem; +#ifdef CONFIG_HIGHMEM + high_memory = (void *)(min_high_pfn << PAGE_SHIFT); + kmap_init(); +#endif } /* @@ -135,6 +175,14 @@ void __init setup_arch_memory(void) */ void __init mem_init(void) { +#ifdef CONFIG_HIGHMEM + unsigned long tmp; + + reset_all_zones_managed_pages(); + for (tmp = min_high_pfn; tmp < max_pfn; tmp++) + free_highmem_page(pfn_to_page(tmp)); +#endif + free_all_bootmem(); mem_init_print_info(NULL); } diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 2c7ce8bb7475..0ee739846847 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -109,6 +109,10 @@ DEFINE_PER_CPU(unsigned int, asid_cache) = MM_CTXT_FIRST_CYCLE; static inline void __tlb_entry_erase(void) { write_aux_reg(ARC_REG_TLBPD1, 0); + + if (is_pae40_enabled()) + write_aux_reg(ARC_REG_TLBPD1HI, 0); + write_aux_reg(ARC_REG_TLBPD0, 0); write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); } @@ -182,7 +186,7 @@ static void utlb_invalidate(void) } -static void tlb_entry_insert(unsigned int pd0, unsigned int pd1) +static void tlb_entry_insert(unsigned int pd0, pte_t pd1) { unsigned int idx; @@ -225,10 +229,14 @@ static void tlb_entry_erase(unsigned int vaddr_n_asid) write_aux_reg(ARC_REG_TLBCOMMAND, TLBDeleteEntry); } -static void tlb_entry_insert(unsigned int pd0, unsigned int pd1) +static void tlb_entry_insert(unsigned int pd0, pte_t pd1) { write_aux_reg(ARC_REG_TLBPD0, pd0); write_aux_reg(ARC_REG_TLBPD1, pd1); + + if (is_pae40_enabled()) + write_aux_reg(ARC_REG_TLBPD1HI, (u64)pd1 >> 32); + write_aux_reg(ARC_REG_TLBCOMMAND, TLBInsertEntry); } @@ -240,22 +248,39 @@ static void tlb_entry_insert(unsigned int pd0, unsigned int pd1) noinline void local_flush_tlb_all(void) { + struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu; unsigned long flags; unsigned int entry; - struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu; + int num_tlb = mmu->sets * mmu->ways; local_irq_save(flags); /* Load PD0 and PD1 with template for a Blank Entry */ write_aux_reg(ARC_REG_TLBPD1, 0); + + if (is_pae40_enabled()) + write_aux_reg(ARC_REG_TLBPD1HI, 0); + write_aux_reg(ARC_REG_TLBPD0, 0); - for (entry = 0; entry < mmu->num_tlb; entry++) { + for (entry = 0; entry < num_tlb; entry++) { /* write this entry to the TLB */ write_aux_reg(ARC_REG_TLBINDEX, entry); write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); } + if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) { + const int stlb_idx = 0x800; + + /* Blank sTLB entry */ + write_aux_reg(ARC_REG_TLBPD0, _PAGE_HW_SZ); + + for (entry = stlb_idx; entry < stlb_idx + 16; entry++) { + write_aux_reg(ARC_REG_TLBINDEX, entry); + write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); + } + } + utlb_invalidate(); local_irq_restore(flags); @@ -409,6 +434,15 @@ static inline void ipi_flush_tlb_range(void *arg) local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end); } +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +static inline void ipi_flush_pmd_tlb_range(void *arg) +{ + struct tlb_args *ta = arg; + + local_flush_pmd_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end); +} +#endif + static inline void ipi_flush_tlb_kernel_range(void *arg) { struct tlb_args *ta = (struct tlb_args *)arg; @@ -449,6 +483,20 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_range, &ta, 1); } +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + struct tlb_args ta = { + .ta_vma = vma, + .ta_start = start, + .ta_end = end + }; + + on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_pmd_tlb_range, &ta, 1); +} +#endif + void flush_tlb_kernel_range(unsigned long start, unsigned long end) { struct tlb_args ta = { @@ -463,11 +511,12 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) /* * Routine to create a TLB entry */ -void create_tlb(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) +void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep) { unsigned long flags; unsigned int asid_or_sasid, rwx; - unsigned long pd0, pd1; + unsigned long pd0; + pte_t pd1; /* * create_tlb() assumes that current->mm == vma->mm, since @@ -499,9 +548,9 @@ void create_tlb(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) local_irq_save(flags); - tlb_paranoid_check(asid_mm(vma->vm_mm, smp_processor_id()), address); + tlb_paranoid_check(asid_mm(vma->vm_mm, smp_processor_id()), vaddr); - address &= PAGE_MASK; + vaddr &= PAGE_MASK; /* update this PTE credentials */ pte_val(*ptep) |= (_PAGE_PRESENT | _PAGE_ACCESSED); @@ -511,7 +560,7 @@ void create_tlb(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) /* ASID for this task */ asid_or_sasid = read_aux_reg(ARC_REG_PID) & 0xff; - pd0 = address | asid_or_sasid | (pte_val(*ptep) & PTE_BITS_IN_PD0); + pd0 = vaddr | asid_or_sasid | (pte_val(*ptep) & PTE_BITS_IN_PD0); /* * ARC MMU provides fully orthogonal access bits for K/U mode, @@ -547,7 +596,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned, pte_t *ptep) { unsigned long vaddr = vaddr_unaligned & PAGE_MASK; - unsigned long paddr = pte_val(*ptep) & PAGE_MASK; + phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK; struct page *page = pfn_to_page(pte_pfn(*ptep)); create_tlb(vma, vaddr, ptep); @@ -580,6 +629,95 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned, } } +#ifdef CONFIG_TRANSPARENT_HUGEPAGE + +/* + * MMUv4 in HS38x cores supports Super Pages which are basis for Linux THP + * support. + * + * Normal and Super pages can co-exist (ofcourse not overlap) in TLB with a + * new bit "SZ" in TLB page desciptor to distinguish between them. + * Super Page size is configurable in hardware (4K to 16M), but fixed once + * RTL builds. + * + * The exact THP size a Linx configuration will support is a function of: + * - MMU page size (typical 8K, RTL fixed) + * - software page walker address split between PGD:PTE:PFN (typical + * 11:8:13, but can be changed with 1 line) + * So for above default, THP size supported is 8K * (2^8) = 2M + * + * Default Page Walker is 2 levels, PGD:PTE:PFN, which in THP regime + * reduces to 1 level (as PTE is folded into PGD and canonically referred + * to as PMD). + * Thus THP PMD accessors are implemented in terms of PTE (just like sparc) + */ + +void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr, + pmd_t *pmd) +{ + pte_t pte = __pte(pmd_val(*pmd)); + update_mmu_cache(vma, addr, &pte); +} + +void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp, + pgtable_t pgtable) +{ + struct list_head *lh = (struct list_head *) pgtable; + + assert_spin_locked(&mm->page_table_lock); + + /* FIFO */ + if (!pmd_huge_pte(mm, pmdp)) + INIT_LIST_HEAD(lh); + else + list_add(lh, (struct list_head *) pmd_huge_pte(mm, pmdp)); + pmd_huge_pte(mm, pmdp) = pgtable; +} + +pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp) +{ + struct list_head *lh; + pgtable_t pgtable; + + assert_spin_locked(&mm->page_table_lock); + + pgtable = pmd_huge_pte(mm, pmdp); + lh = (struct list_head *) pgtable; + if (list_empty(lh)) + pmd_huge_pte(mm, pmdp) = NULL; + else { + pmd_huge_pte(mm, pmdp) = (pgtable_t) lh->next; + list_del(lh); + } + + pte_val(pgtable[0]) = 0; + pte_val(pgtable[1]) = 0; + + return pgtable; +} + +void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + unsigned int cpu; + unsigned long flags; + + local_irq_save(flags); + + cpu = smp_processor_id(); + + if (likely(asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID)) { + unsigned int asid = hw_pid(vma->vm_mm, cpu); + + /* No need to loop here: this will always be for 1 Huge Page */ + tlb_entry_erase(start | _PAGE_HW_SZ | asid); + } + + local_irq_restore(flags); +} + +#endif + /* Read the Cache Build Confuration Registers, Decode them and save into * the cpuinfo structure for later use. * No Validation is done here, simply read/convert the BCRs @@ -598,10 +736,10 @@ void read_decode_mmu_bcr(void) struct bcr_mmu_3 { #ifdef CONFIG_CPU_BIG_ENDIAN - unsigned int ver:8, ways:4, sets:4, osm:1, reserv:3, pg_sz:4, + unsigned int ver:8, ways:4, sets:4, res:3, sasid:1, pg_sz:4, u_itlb:4, u_dtlb:4; #else - unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, reserv:3, osm:1, sets:4, + unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, sasid:1, res:3, sets:4, ways:4, ver:8; #endif } *mmu3; @@ -622,7 +760,7 @@ void read_decode_mmu_bcr(void) if (mmu->ver <= 2) { mmu2 = (struct bcr_mmu_1_2 *)&tmp; - mmu->pg_sz_k = TO_KB(PAGE_SIZE); + mmu->pg_sz_k = TO_KB(0x2000); mmu->sets = 1 << mmu2->sets; mmu->ways = 1 << mmu2->ways; mmu->u_dtlb = mmu2->u_dtlb; @@ -634,6 +772,7 @@ void read_decode_mmu_bcr(void) mmu->ways = 1 << mmu3->ways; mmu->u_dtlb = mmu3->u_dtlb; mmu->u_itlb = mmu3->u_itlb; + mmu->sasid = mmu3->sasid; } else { mmu4 = (struct bcr_mmu_4 *)&tmp; mmu->pg_sz_k = 1 << (mmu4->sz0 - 1); @@ -642,9 +781,9 @@ void read_decode_mmu_bcr(void) mmu->ways = mmu4->n_ways * 2; mmu->u_dtlb = mmu4->u_dtlb * 4; mmu->u_itlb = mmu4->u_itlb * 4; + mmu->sasid = mmu4->sasid; + mmu->pae = mmu4->pae; } - - mmu->num_tlb = mmu->sets * mmu->ways; } char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len) @@ -655,14 +794,15 @@ char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len) if (p_mmu->s_pg_sz_m) scnprintf(super_pg, 64, "%dM Super Page%s, ", - p_mmu->s_pg_sz_m, " (not used)"); + p_mmu->s_pg_sz_m, + IS_USED_CFG(CONFIG_TRANSPARENT_HUGEPAGE)); n += scnprintf(buf + n, len - n, - "MMU [v%x]\t: %dk PAGE, %sJTLB %d (%dx%d), uDTLB %d, uITLB %d %s\n", + "MMU [v%x]\t: %dk PAGE, %sJTLB %d (%dx%d), uDTLB %d, uITLB %d %s%s\n", p_mmu->ver, p_mmu->pg_sz_k, super_pg, - p_mmu->num_tlb, p_mmu->sets, p_mmu->ways, + p_mmu->sets * p_mmu->ways, p_mmu->sets, p_mmu->ways, p_mmu->u_dtlb, p_mmu->u_itlb, - IS_ENABLED(CONFIG_ARC_MMU_SASID) ? ",SASID" : ""); + IS_AVAIL2(p_mmu->pae, "PAE40 ", CONFIG_ARC_HAS_PAE40)); return buf; } @@ -690,6 +830,14 @@ void arc_mmu_init(void) if (mmu->pg_sz_k != TO_KB(PAGE_SIZE)) panic("MMU pg size != PAGE_SIZE (%luk)\n", TO_KB(PAGE_SIZE)); + if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) && + mmu->s_pg_sz_m != TO_MB(HPAGE_PMD_SIZE)) + panic("MMU Super pg size != Linux HPAGE_PMD_SIZE (%luM)\n", + (unsigned long)TO_MB(HPAGE_PMD_SIZE)); + + if (IS_ENABLED(CONFIG_ARC_HAS_PAE40) && !mmu->pae) + panic("Hardware doesn't support PAE40\n"); + /* Enable the MMU */ write_aux_reg(ARC_REG_PID, MMU_ENABLE); @@ -725,15 +873,15 @@ void arc_mmu_init(void) * the duplicate one. * -Knob to be verbose abt it.(TODO: hook them up to debugfs) */ -volatile int dup_pd_verbose = 1;/* Be slient abt it or complain (default) */ +volatile int dup_pd_silent; /* Be slient abt it or complain (default) */ void do_tlb_overlap_fault(unsigned long cause, unsigned long address, struct pt_regs *regs) { - int set, way, n; - unsigned long flags, is_valid; struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu; - unsigned int pd0[mmu->ways], pd1[mmu->ways]; + unsigned int pd0[mmu->ways]; + unsigned long flags; + int set; local_irq_save(flags); @@ -743,14 +891,16 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address, /* loop thru all sets of TLB */ for (set = 0; set < mmu->sets; set++) { + int is_valid, way; + /* read out all the ways of current set */ for (way = 0, is_valid = 0; way < mmu->ways; way++) { write_aux_reg(ARC_REG_TLBINDEX, SET_WAY_TO_IDX(mmu, set, way)); write_aux_reg(ARC_REG_TLBCOMMAND, TLBRead); pd0[way] = read_aux_reg(ARC_REG_TLBPD0); - pd1[way] = read_aux_reg(ARC_REG_TLBPD1); is_valid |= pd0[way] & _PAGE_PRESENT; + pd0[way] &= PAGE_MASK; } /* If all the WAYS in SET are empty, skip to next SET */ @@ -759,30 +909,28 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address, /* Scan the set for duplicate ways: needs a nested loop */ for (way = 0; way < mmu->ways - 1; way++) { + + int n; + if (!pd0[way]) continue; for (n = way + 1; n < mmu->ways; n++) { - if ((pd0[way] & PAGE_MASK) == - (pd0[n] & PAGE_MASK)) { - - if (dup_pd_verbose) { - pr_info("Duplicate PD's @" - "[%d:%d]/[%d:%d]\n", - set, way, set, n); - pr_info("TLBPD0[%u]: %08x\n", - way, pd0[way]); - } - - /* - * clear entry @way and not @n. This is - * critical to our optimised loop - */ - pd0[way] = pd1[way] = 0; - write_aux_reg(ARC_REG_TLBINDEX, + if (pd0[way] != pd0[n]) + continue; + + if (!dup_pd_silent) + pr_info("Dup TLB PD0 %08x @ set %d ways %d,%d\n", + pd0[way], set, way, n); + + /* + * clear entry @way and not @n. + * This is critical to our optimised loop + */ + pd0[way] = 0; + write_aux_reg(ARC_REG_TLBINDEX, SET_WAY_TO_IDX(mmu, set, way)); - __tlb_entry_erase(); - } + __tlb_entry_erase(); } } } diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index f6f4c3cb505d..63860adc4814 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -205,20 +205,38 @@ ex_saved_reg1: #endif lsr r0, r2, PGDIR_SHIFT ; Bits for indexing into PGD - ld.as r1, [r1, r0] ; PGD entry corresp to faulting addr - and.f r1, r1, PAGE_MASK ; Ignoring protection and other flags - ; contains Ptr to Page Table - bz.d do_slow_path_pf ; if no Page Table, do page fault + ld.as r3, [r1, r0] ; PGD entry corresp to faulting addr + tst r3, r3 + bz do_slow_path_pf ; if no Page Table, do page fault + +#ifdef CONFIG_TRANSPARENT_HUGEPAGE + and.f 0, r3, _PAGE_HW_SZ ; Is this Huge PMD (thp) + add2.nz r1, r1, r0 + bnz.d 2f ; YES: PGD == PMD has THP PTE: stop pgd walk + mov.nz r0, r3 + +#endif + and r1, r3, PAGE_MASK ; Get the PTE entry: The idea is ; (1) x = addr >> PAGE_SHIFT -> masks page-off bits from @fault-addr ; (2) y = x & (PTRS_PER_PTE - 1) -> to get index - ; (3) z = pgtbl[y] - ; To avoid the multiply by in end, we do the -2, <<2 below + ; (3) z = (pgtbl + y * 4) + +#ifdef CONFIG_ARC_HAS_PAE40 +#define PTE_SIZE_LOG 3 /* 8 == 2 ^ 3 */ +#else +#define PTE_SIZE_LOG 2 /* 4 == 2 ^ 2 */ +#endif + + ; multiply in step (3) above avoided by shifting lesser in step (1) + lsr r0, r2, ( PAGE_SHIFT - PTE_SIZE_LOG ) + and r0, r0, ( (PTRS_PER_PTE - 1) << PTE_SIZE_LOG ) + ld.aw r0, [r1, r0] ; r0: PTE (lower word only for PAE40) + ; r1: PTE ptr + +2: - lsr r0, r2, (PAGE_SHIFT - 2) - and r0, r0, ( (PTRS_PER_PTE - 1) << 2) - ld.aw r0, [r1, r0] ; get PTE and PTE ptr for fault addr #ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT and.f 0, r0, _PAGE_PRESENT bz 1f @@ -233,18 +251,23 @@ ex_saved_reg1: ;----------------------------------------------------------------- ; Convert Linux PTE entry into TLB entry ; A one-word PTE entry is programmed as two-word TLB Entry [PD0:PD1] in mmu +; (for PAE40, two-words PTE, while three-word TLB Entry [PD0:PD1:PD1HI]) ; IN: r0 = PTE, r1 = ptr to PTE .macro CONV_PTE_TO_TLB - and r3, r0, PTE_BITS_RWX ; r w x - lsl r2, r3, 3 ; r w x 0 0 0 (GLOBAL, kernel only) + and r3, r0, PTE_BITS_RWX ; r w x + lsl r2, r3, 3 ; Kr Kw Kx 0 0 0 (GLOBAL, kernel only) and.f 0, r0, _PAGE_GLOBAL - or.z r2, r2, r3 ; r w x r w x (!GLOBAL, user page) + or.z r2, r2, r3 ; Kr Kw Kx Ur Uw Ux (!GLOBAL, user page) and r3, r0, PTE_BITS_NON_RWX_IN_PD1 ; Extract PFN+cache bits from PTE or r3, r3, r2 - sr r3, [ARC_REG_TLBPD1] ; these go in PD1 + sr r3, [ARC_REG_TLBPD1] ; paddr[31..13] | Kr Kw Kx Ur Uw Ux | C +#ifdef CONFIG_ARC_HAS_PAE40 + ld r3, [r1, 4] ; paddr[39..32] + sr r3, [ARC_REG_TLBPD1HI] +#endif and r2, r0, PTE_BITS_IN_PD0 ; Extract other PTE flags: (V)alid, (G)lb @@ -365,7 +388,7 @@ ENTRY(EV_TLBMissD) lr r3, [ecr] or r0, r0, _PAGE_ACCESSED ; Accessed bit always btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; See if it was a Write Access ? - or.nz r0, r0, _PAGE_MODIFIED ; if Write, set Dirty bit as well + or.nz r0, r0, _PAGE_DIRTY ; if Write, set Dirty bit as well st_s r0, [r1] ; Write back PTE CONV_PTE_TO_TLB diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c index 0a77b19e1df8..1b0f0f458a2b 100644 --- a/arch/arc/plat-axs10x/axs10x.c +++ b/arch/arc/plat-axs10x/axs10x.c @@ -455,11 +455,6 @@ static void __init axs103_early_init(void) axs10x_print_board_ver(AXC003_CREG + 4088, "AXC003 CPU Card"); axs10x_early_init(); - -#ifdef CONFIG_ARC_MCIP - /* No Hardware init, but filling the smp ops callbacks */ - mcip_init_early_smp(); -#endif } #endif @@ -487,9 +482,6 @@ static const char *axs103_compat[] __initconst = { MACHINE_START(AXS103, "axs103") .dt_compat = axs103_compat, .init_early = axs103_early_init, -#ifdef CONFIG_ARC_MCIP - .init_smp = mcip_init_smp, -#endif MACHINE_END /* diff --git a/arch/arc/plat-sim/platform.c b/arch/arc/plat-sim/platform.c index d9e35b4a2f08..dde692812bc1 100644 --- a/arch/arc/plat-sim/platform.c +++ b/arch/arc/plat-sim/platform.c @@ -30,8 +30,4 @@ static const char *simulation_compat[] __initconst = { MACHINE_START(SIMULATION, "simulation") .dt_compat = simulation_compat, -#ifdef CONFIG_ARC_MCIP - .init_early = mcip_init_early_smp, - .init_smp = mcip_init_smp, -#endif MACHINE_END diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0d72535ed01d..f1ed1109f488 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -645,6 +645,7 @@ config ARCH_SHMOBILE_LEGACY config ARCH_RPC bool "RiscPC" + depends on MMU select ARCH_ACORN select ARCH_MAY_HAVE_PC_FDC select ARCH_SPARSEMEM_ENABLE @@ -1411,7 +1412,6 @@ config HAVE_ARM_ARCH_TIMER config HAVE_ARM_TWD bool - depends on SMP select CLKSRC_OF if OF help This options enables support for the ARM timer and watchdog unit @@ -1471,6 +1471,8 @@ choice config VMSPLIT_3G bool "3G/1G user/kernel split" + config VMSPLIT_3G_OPT + bool "3G/1G user/kernel split (for full 1G low memory)" config VMSPLIT_2G bool "2G/2G user/kernel split" config VMSPLIT_1G @@ -1482,6 +1484,7 @@ config PAGE_OFFSET default PHYS_OFFSET if !MMU default 0x40000000 if VMSPLIT_1G default 0x80000000 if VMSPLIT_2G + default 0xB0000000 if VMSPLIT_3G_OPT default 0xC0000000 config NR_CPUS @@ -1696,8 +1699,9 @@ config HIGHMEM If unsure, say n. config HIGHPTE - bool "Allocate 2nd-level pagetables from highmem" + bool "Allocate 2nd-level pagetables from highmem" if EXPERT depends on HIGHMEM + default y help The VM uses one page of physical memory for each page table. For systems with a lot of processes, this can use a lot of diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 568adf5efde0..d55e3ea89fda 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -402,11 +402,12 @@ /* SMPS9 unused */ ldo1_reg: ldo1 { - /* VDD_SD */ + /* VDD_SD / VDDSHV8 */ regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; + regulator-always-on; }; ldo2_reg: ldo2 { diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 89f5a95954ed..4047621b137e 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -46,7 +46,7 @@ / { model = "Marvell Armada 385 Access Point Development Board"; - compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x"; + compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380"; chosen { stdout-path = "serial1:115200n8"; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 63a48490e2f9..d4dbd28d348c 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -152,7 +152,7 @@ }; usb_phy2: phy@a2f400 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xa2f400 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 14>; @@ -170,7 +170,7 @@ }; usb_phy0: phy@b74000 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xb74000 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 12>; @@ -178,7 +178,7 @@ }; usb_phy1: phy@b78000 { - compatible = "marvell,berlin2-usb-phy"; + compatible = "marvell,berlin2cd-usb-phy"; reg = <0xb78000 0x128>; #phy-cells = <0>; resets = <&chip_rst 0x104 13>; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 955c24ee4a8c..8c24975e8f9d 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -35,28 +35,28 @@ button@1 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; label = "DSW2-1"; linux,code = <KEY_1>; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; button@2 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; label = "DSW2-2"; linux,code = <KEY_2>; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; button@3 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; label = "DSW2-3"; linux,code = <KEY_3>; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; button@4 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; label = "DSW2-4"; linux,code = <KEY_4>; gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 8f4d76c5e11c..1b95da79293c 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -915,6 +915,11 @@ }; }; +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&clock CLK_FIN_PLL>; +}; + &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 7d5b386b5ae6..8f40c7e549bd 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -878,6 +878,11 @@ }; }; +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&clock CLK_FIN_PLL>; +}; + &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index b738ce0f9d9b..6e444bb873f9 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -588,10 +588,10 @@ status = "disabled"; }; - uart2: serial@30870000 { + uart2: serial@30890000 { compatible = "fsl,imx7d-uart", "fsl,imx6q-uart"; - reg = <0x30870000 0x10000>; + reg = <0x30890000 0x10000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_UART2_ROOT_CLK>, <&clks IMX7D_UART2_ROOT_CLK>; diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts index 36155b749d9f..d2d44df9c8c0 100644 --- a/arch/arm/boot/dts/kirkwood-net5big.dts +++ b/arch/arm/boot/dts/kirkwood-net5big.dts @@ -86,6 +86,66 @@ clock-frequency = <32768>; }; }; + + netxbig-leds { + blue-sata2 { + label = "netxbig:blue:sata2"; + mode-addr = <5>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata2 { + label = "netxbig:red:sata2"; + mode-addr = <5>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + blue-sata3 { + label = "netxbig:blue:sata3"; + mode-addr = <6>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata3 { + label = "netxbig:red:sata3"; + mode-addr = <6>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + blue-sata4 { + label = "netxbig:blue:sata4"; + mode-addr = <7>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata4 { + label = "netxbig:red:sata4"; + mode-addr = <7>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + }; }; &mdio { diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi index 1508b12147df..62515a8b99b9 100644 --- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi @@ -13,6 +13,7 @@ * warranty of any kind, whether express or implied. */ +#include <dt-bindings/leds/leds-netxbig.h> #include "kirkwood.dtsi" #include "kirkwood-6281.dtsi" @@ -105,6 +106,85 @@ gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; }; + + netxbig_gpio_ext: netxbig-gpio-ext { + compatible = "lacie,netxbig-gpio-ext"; + + addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH + &gpio1 16 GPIO_ACTIVE_HIGH + &gpio1 17 GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH + &gpio1 13 GPIO_ACTIVE_HIGH + &gpio1 14 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + + netxbig-leds { + compatible = "lacie,netxbig-leds"; + + gpio-ext = <&netxbig_gpio_ext>; + + timers = <NETXBIG_LED_TIMER1 500 500 + NETXBIG_LED_TIMER2 500 1000>; + + blue-power { + label = "netxbig:blue:power"; + mode-addr = <0>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 1 + NETXBIG_LED_TIMER1 3 + NETXBIG_LED_TIMER2 7>; + bright-addr = <1>; + max-brightness = <7>; + }; + red-power { + label = "netxbig:red:power"; + mode-addr = <0>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <1>; + max-brightness = <7>; + }; + blue-sata0 { + label = "netxbig:blue:sata0"; + mode-addr = <3>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata0 { + label = "netxbig:red:sata0"; + mode-addr = <3>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + blue-sata1 { + label = "netxbig:blue:sata1"; + mode-addr = <4>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata1 { + label = "netxbig:red:sata1"; + mode-addr = <4>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + }; }; &mdio { diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 91146c318798..5b0430041ec6 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -12,7 +12,7 @@ / { model = "LogicPD Zoom DM3730 Torpedo Development Kit"; - compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx"; + compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"; gpio_keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 548441384d2a..8c77c87660cd 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -67,7 +67,7 @@ timer@c1109940 { compatible = "amlogic,meson6-timer"; - reg = <0xc1109940 0x14>; + reg = <0xc1109940 0x18>; interrupts = <0 10 1>; }; @@ -80,36 +80,37 @@ wdt: watchdog@c1109900 { compatible = "amlogic,meson6-wdt"; reg = <0xc1109900 0x8>; + interrupts = <0 0 1>; }; uart_AO: serial@c81004c0 { compatible = "amlogic,meson-uart"; - reg = <0xc81004c0 0x14>; + reg = <0xc81004c0 0x18>; interrupts = <0 90 1>; clocks = <&clk81>; status = "disabled"; }; - uart_A: serial@c81084c0 { + uart_A: serial@c11084c0 { compatible = "amlogic,meson-uart"; - reg = <0xc81084c0 0x14>; - interrupts = <0 90 1>; + reg = <0xc11084c0 0x18>; + interrupts = <0 26 1>; clocks = <&clk81>; status = "disabled"; }; - uart_B: serial@c81084dc { + uart_B: serial@c11084dc { compatible = "amlogic,meson-uart"; - reg = <0xc81084dc 0x14>; - interrupts = <0 90 1>; + reg = <0xc11084dc 0x18>; + interrupts = <0 75 1>; clocks = <&clk81>; status = "disabled"; }; - uart_C: serial@c8108700 { + uart_C: serial@c1108700 { compatible = "amlogic,meson-uart"; - reg = <0xc8108700 0x14>; - interrupts = <0 90 1>; + reg = <0xc1108700 0x18>; + interrupts = <0 93 1>; clocks = <&clk81>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 16e8ce350dda..bb339d1648e0 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -13,7 +13,7 @@ / { model = "TI OMAP37XX EVM (TMDSEVM3730)"; - compatible = "ti,omap3-evm-37xx", "ti,omap36xx"; + compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index b5334ecff13c..fec076eb7aef 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -90,7 +90,7 @@ regulators { vccio_sd: LDO_REG4 { regulator-name = "vccio_sd"; - regulator-min-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; @@ -116,7 +116,12 @@ cap-sd-highspeed; card-detect-delay = <200>; cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + rockchip,default-sample-phase = <90>; num-slots = <1>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; vmmc-supply = <&vcc33_sd>; vqmmc-supply = <&vccio_sd>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 275c78ccc0f3..860cea0a7613 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -149,7 +149,9 @@ broken-cd; bus-width = <8>; cap-mmc-highspeed; + rockchip,default-sample-phase = <158>; disable-wp; + mmc-hs200-1_8v; mmc-pwrseq = <&emmc_pwrseq>; non-removable; num-slots = <1>; @@ -355,6 +357,10 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; vmmc-supply = <&vcc33_sys>; vqmmc-supply = <&vcc18_wl>; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 906e938fb6bf..4e7c6b7392af 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -222,8 +222,9 @@ sdmmc: dwmmc@ff0c0000 { compatible = "rockchip,rk3288-dw-mshc"; clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; - clock-names = "biu", "ciu"; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0c0000 0x4000>; @@ -233,8 +234,9 @@ sdio0: dwmmc@ff0d0000 { compatible = "rockchip,rk3288-dw-mshc"; clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>; - clock-names = "biu", "ciu"; + clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, + <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0d0000 0x4000>; @@ -244,8 +246,9 @@ sdio1: dwmmc@ff0e0000 { compatible = "rockchip,rk3288-dw-mshc"; clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>; - clock-names = "biu", "ciu"; + clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>, + <&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0e0000 0x4000>; @@ -255,8 +258,9 @@ emmc: dwmmc@ff0f0000 { compatible = "rockchip,rk3288-dw-mshc"; clock-freq-min-max = <400000 150000000>; - clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; - clock-names = "biu", "ciu"; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; reg = <0xff0f0000 0x4000>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 034cd48ae28b..cc05cde0f9a4 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -921,6 +921,20 @@ clocks = <&twi1_clk>; status = "disabled"; }; + + pioA: pinctrl@fc038000 { + compatible = "atmel,sama5d2-pinctrl"; + reg = <0xfc038000 0x600>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>, + <68 IRQ_TYPE_LEVEL_HIGH 7>, + <69 IRQ_TYPE_LEVEL_HIGH 7>, + <70 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&pioA_clk>; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 810cda743b6d..9c2387b34d0c 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -56,7 +56,7 @@ /* VMMCI level-shifter enable */ default_hrefv60_cfg2 { pins = "GPIO169_D22"; - ste,config = <&gpio_out_lo>; + ste,config = <&gpio_out_hi>; }; /* VMMCI level-shifter voltage select */ default_hrefv60_cfg3 { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 32a5ccb14e7e..e80e42163883 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -47,35 +47,35 @@ button@1 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <2>; label = "userpb"; gpios = <&gpio1 0 0x4>; }; button@2 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <3>; label = "extkb1"; gpios = <&gpio4 23 0x4>; }; button@3 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <4>; label = "extkb2"; gpios = <&gpio4 24 0x4>; }; button@4 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <5>; label = "extkb3"; gpios = <&gpio5 1 0x4>; }; button@5 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <6>; label = "extkb4"; gpios = <&gpio5 2 0x4>; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 9d4f86e9c50a..d845bd1448b5 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -234,7 +234,9 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + /* gpio-ranges = <&pinmux 0 0 246>; + */ }; apbmisc@70000800 { diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 1e204a6de12c..819e2ae2cabe 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -258,7 +258,9 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + /* gpio-ranges = <&pinmux 0 0 251>; + */ }; apbdma: dma@0,60020000 { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index e058709e6d98..969b828505ae 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -244,7 +244,9 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + /* gpio-ranges = <&pinmux 0 0 224>; + */ }; apbmisc@70000800 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index fe04fb5e155f..c6938ad1b543 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -349,7 +349,9 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + /* gpio-ranges = <&pinmux 0 0 248>; + */ }; apbmisc@70000800 { diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts index 33963acd7e8f..f80f772d99fb 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts @@ -85,7 +85,7 @@ }; ðsc { - interrupts = <0 50 4>; + interrupts = <0 52 4>; }; &serial0 { diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 1ff2bfa2e183..13ba48c4b03b 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -166,7 +166,6 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_DW=y -CONFIG_MMC_DW_IDMAC=y CONFIG_MMC_DW_EXYNOS=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX77686=y diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig index 5997dbc69822..b2e340b272ee 100644 --- a/arch/arm/configs/hisi_defconfig +++ b/arch/arm/configs/hisi_defconfig @@ -69,7 +69,6 @@ CONFIG_NOP_USB_XCEIV=y CONFIG_MMC=y CONFIG_RTC_CLASS=y CONFIG_MMC_DW=y -CONFIG_MMC_DW_IDMAC=y CONFIG_MMC_DW_PLTFM=y CONFIG_RTC_DRV_PL031=y CONFIG_DMADEVICES=y diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig index 1c47f86c3970..b7e8cdab51f9 100644 --- a/arch/arm/configs/lpc18xx_defconfig +++ b/arch/arm/configs/lpc18xx_defconfig @@ -119,7 +119,6 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_MMC=y CONFIG_MMC_DW=y -CONFIG_MMC_DW_IDMAC=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_PCA9532=y diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h index 916a2744d5c6..97882f9bad12 100644 --- a/arch/arm/include/asm/cmpxchg.h +++ b/arch/arm/include/asm/cmpxchg.h @@ -39,6 +39,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size switch (size) { #if __LINUX_ARM_ARCH__ >= 6 +#ifndef CONFIG_CPU_V6 /* MIN ARCH >= V6K */ case 1: asm volatile("@ __xchg1\n" "1: ldrexb %0, [%3]\n" @@ -49,6 +50,17 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size : "r" (x), "r" (ptr) : "memory", "cc"); break; + case 2: + asm volatile("@ __xchg2\n" + "1: ldrexh %0, [%3]\n" + " strexh %1, %2, [%3]\n" + " teq %1, #0\n" + " bne 1b" + : "=&r" (ret), "=&r" (tmp) + : "r" (x), "r" (ptr) + : "memory", "cc"); + break; +#endif case 4: asm volatile("@ __xchg4\n" "1: ldrex %0, [%3]\n" diff --git a/arch/arm/include/asm/irqflags.h b/arch/arm/include/asm/irqflags.h index 43908146a5cf..e6b70d9d084e 100644 --- a/arch/arm/include/asm/irqflags.h +++ b/arch/arm/include/asm/irqflags.h @@ -54,6 +54,14 @@ static inline void arch_local_irq_disable(void) #define local_fiq_enable() __asm__("cpsie f @ __stf" : : : "memory", "cc") #define local_fiq_disable() __asm__("cpsid f @ __clf" : : : "memory", "cc") + +#ifndef CONFIG_CPU_V7M +#define local_abt_enable() __asm__("cpsie a @ __sta" : : : "memory", "cc") +#define local_abt_disable() __asm__("cpsid a @ __cla" : : : "memory", "cc") +#else +#define local_abt_enable() do { } while (0) +#define local_abt_disable() do { } while (0) +#endif #else /* @@ -136,6 +144,8 @@ static inline void arch_local_irq_disable(void) : "memory", "cc"); \ }) +#define local_abt_enable() do { } while (0) +#define local_abt_disable() do { } while (0) #endif /* diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index cb3a40717edd..5c1ad11aa392 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -47,7 +47,7 @@ struct machine_desc { unsigned l2c_aux_val; /* L2 cache aux value */ unsigned l2c_aux_mask; /* L2 cache aux mask */ void (*l2c_write_sec)(unsigned long, unsigned); - struct smp_operations *smp; /* SMP operations */ + const struct smp_operations *smp; /* SMP operations */ bool (*smp_init)(void); void (*fixup)(struct tag *, char **); void (*dt_fixup)(void); diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 98d58bb04ac5..c79b57bf71c4 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -76,10 +76,12 @@ */ #define XIP_VIRT_ADDR(physaddr) (MODULES_VADDR + ((physaddr) & 0x000fffff)) +#if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE) /* * Allow 16MB-aligned ioremap pages */ #define IOREMAP_MAX_ORDER 24 +#endif #else /* CONFIG_MMU */ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index f40354198bad..348caabb7625 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -43,7 +43,7 @@ */ #define VMALLOC_OFFSET (8*1024*1024) #define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) -#define VMALLOC_END 0xff000000UL +#define VMALLOC_END 0xff800000UL #define LIBRARY_TEXT_START 0x0c000000 diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index ef356659b4f4..3d6dc8b460e4 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -112,7 +112,7 @@ struct smp_operations { struct of_cpu_method { const char *method; - struct smp_operations *ops; + const struct smp_operations *ops; }; #define CPU_METHOD_OF_DECLARE(name, _method, _ops) \ @@ -122,6 +122,6 @@ struct of_cpu_method { /* * set platform specific SMP operations */ -extern void smp_set_ops(struct smp_operations *); +extern void smp_set_ops(const struct smp_operations *); #endif /* ifndef __ASM_ARM_SMP_H */ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 7cba573c2cc9..7b84657fba35 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -21,13 +21,6 @@ */ #define __NR_syscalls (392) -/* - * *NOTE*: This is a ghost syscall private to the kernel. Only the - * __kuser_cmpxchg code in entry-armv.S should be aware of its - * existence. Don't ever use this from user code. - */ -#define __ARM_NR_cmpxchg (__ARM_NR_BASE+0x00fff0) - #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_PAUSE diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 11c54de9f8cf..65addcbf5b30 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -101,6 +101,7 @@ void __init arm_dt_init_cpu_maps(void) if (of_property_read_u32(cpu, "reg", &hwid)) { pr_debug(" * %s missing reg property\n", cpu->full_name); + of_node_put(cpu); return; } @@ -108,8 +109,10 @@ void __init arm_dt_init_cpu_maps(void) * 8 MSBs must be set to 0 in the DT since the reg property * defines the MPIDR[23:0]. */ - if (hwid & ~MPIDR_HWID_BITMASK) + if (hwid & ~MPIDR_HWID_BITMASK) { + of_node_put(cpu); return; + } /* * Duplicate MPIDRs are a recipe for disaster. @@ -119,9 +122,11 @@ void __init arm_dt_init_cpu_maps(void) * to avoid matching valid MPIDR[23:0] values. */ for (j = 0; j < cpuidx; j++) - if (WARN(tmp_map[j] == hwid, "Duplicate /cpu reg " - "properties in the DT\n")) + if (WARN(tmp_map[j] == hwid, + "Duplicate /cpu reg properties in the DT\n")) { + of_node_put(cpu); return; + } /* * Build a stashed array of MPIDR values. Numbering scheme @@ -143,6 +148,7 @@ void __init arm_dt_init_cpu_maps(void) "max cores %u, capping them\n", cpuidx, nr_cpu_ids)) { cpuidx = nr_cpu_ids; + of_node_put(cpu); break; } diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 3e1c26eb32b4..3ce377f7251f 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -427,8 +427,7 @@ ENDPROC(__fiq_abt) .endm .macro kuser_cmpxchg_check -#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS) && \ - !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) +#if !defined(CONFIG_CPU_32v6K) && defined(CONFIG_KUSER_HELPERS) #ifndef CONFIG_MMU #warning "NPTL on non MMU needs fixing" #else @@ -859,20 +858,7 @@ __kuser_helper_start: __kuser_cmpxchg64: @ 0xffff0f60 -#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) - - /* - * Poor you. No fast solution possible... - * The kernel itself must perform the operation. - * A special ghost syscall is used for that (see traps.c). - */ - stmfd sp!, {r7, lr} - ldr r7, 1f @ it's 20 bits - swi __ARM_NR_cmpxchg64 - ldmfd sp!, {r7, pc} -1: .word __ARM_NR_cmpxchg64 - -#elif defined(CONFIG_CPU_32v6K) +#if defined(CONFIG_CPU_32v6K) stmfd sp!, {r4, r5, r6, r7} ldrd r4, r5, [r0] @ load old val @@ -948,20 +934,7 @@ __kuser_memory_barrier: @ 0xffff0fa0 __kuser_cmpxchg: @ 0xffff0fc0 -#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) - - /* - * Poor you. No fast solution possible... - * The kernel itself must perform the operation. - * A special ghost syscall is used for that (see traps.c). - */ - stmfd sp!, {r7, lr} - ldr r7, 1f @ it's 20 bits - swi __ARM_NR_cmpxchg - ldmfd sp!, {r7, pc} -1: .word __ARM_NR_cmpxchg - -#elif __LINUX_ARM_ARCH__ < 6 +#if __LINUX_ARM_ARCH__ < 6 #ifdef CONFIG_MMU diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index dc7d0a95bd36..6284779d64ee 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -35,7 +35,6 @@ #include <asm/cputype.h> #include <asm/current.h> #include <asm/hw_breakpoint.h> -#include <asm/kdebug.h> #include <asm/traps.h> /* Breakpoint currently in use for each BRP. */ diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index fd9eefce0a7b..9232caee7060 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -74,7 +74,7 @@ int dbg_set_reg(int regno, void *mem, struct pt_regs *regs) void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task) { - struct pt_regs *thread_regs; + struct thread_info *ti; int regno; /* Just making sure... */ @@ -86,24 +86,17 @@ sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task) gdb_regs[regno] = 0; /* Otherwise, we have only some registers from switch_to() */ - thread_regs = task_pt_regs(task); - gdb_regs[_R0] = thread_regs->ARM_r0; - gdb_regs[_R1] = thread_regs->ARM_r1; - gdb_regs[_R2] = thread_regs->ARM_r2; - gdb_regs[_R3] = thread_regs->ARM_r3; - gdb_regs[_R4] = thread_regs->ARM_r4; - gdb_regs[_R5] = thread_regs->ARM_r5; - gdb_regs[_R6] = thread_regs->ARM_r6; - gdb_regs[_R7] = thread_regs->ARM_r7; - gdb_regs[_R8] = thread_regs->ARM_r8; - gdb_regs[_R9] = thread_regs->ARM_r9; - gdb_regs[_R10] = thread_regs->ARM_r10; - gdb_regs[_FP] = thread_regs->ARM_fp; - gdb_regs[_IP] = thread_regs->ARM_ip; - gdb_regs[_SPT] = thread_regs->ARM_sp; - gdb_regs[_LR] = thread_regs->ARM_lr; - gdb_regs[_PC] = thread_regs->ARM_pc; - gdb_regs[_CPSR] = thread_regs->ARM_cpsr; + ti = task_thread_info(task); + gdb_regs[_R4] = ti->cpu_context.r4; + gdb_regs[_R5] = ti->cpu_context.r5; + gdb_regs[_R6] = ti->cpu_context.r6; + gdb_regs[_R7] = ti->cpu_context.r7; + gdb_regs[_R8] = ti->cpu_context.r8; + gdb_regs[_R9] = ti->cpu_context.r9; + gdb_regs[_R10] = ti->cpu_context.sl; + gdb_regs[_FP] = ti->cpu_context.fp; + gdb_regs[_SPT] = ti->cpu_context.sp; + gdb_regs[_PC] = ti->cpu_context.pc; } void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 48185a773852..b26361355dae 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -80,7 +80,7 @@ static DECLARE_COMPLETION(cpu_running); static struct smp_operations smp_ops; -void __init smp_set_ops(struct smp_operations *ops) +void __init smp_set_ops(const struct smp_operations *ops) { if (ops) smp_ops = *ops; @@ -400,6 +400,7 @@ asmlinkage void secondary_start_kernel(void) local_irq_enable(); local_fiq_enable(); + local_abt_enable(); /* * OK, it's off to the idle thread for us @@ -748,6 +749,15 @@ core_initcall(register_cpufreq_notifier); static void raise_nmi(cpumask_t *mask) { + /* + * Generate the backtrace directly if we are running in a calling + * context that is not preemptible by the backtrace IPI. Note + * that nmi_cpu_backtrace() automatically removes the current cpu + * from mask. + */ + if (cpumask_test_cpu(smp_processor_id(), mask) && irqs_disabled()) + nmi_cpu_backtrace(NULL); + smp_cross_call(mask, IPI_CPU_BACKTRACE); } diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index e9035cda1485..1bfa7a7f5533 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -23,7 +23,6 @@ #include <linux/of_irq.h> #include <linux/of_address.h> -#include <asm/smp_plat.h> #include <asm/smp_twd.h> /* set up by the platform code */ @@ -34,6 +33,8 @@ static unsigned long twd_timer_rate; static DEFINE_PER_CPU(bool, percpu_setup_called); static struct clock_event_device __percpu *twd_evt; +static unsigned int twd_features = + CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; static int twd_ppi; static int twd_shutdown(struct clock_event_device *clk) @@ -294,8 +295,7 @@ static void twd_timer_setup(void) writel_relaxed(0, twd_base + TWD_TIMER_CONTROL); clk->name = "local_timer"; - clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | - CLOCK_EVT_FEAT_C3STOP; + clk->features = twd_features; clk->rating = 350; clk->set_state_shutdown = twd_shutdown; clk->set_state_periodic = twd_set_periodic; @@ -350,6 +350,8 @@ static int __init twd_local_timer_common_register(struct device_node *np) goto out_irq; twd_get_clock(np); + if (!of_property_read_bool(np, "always-on")) + twd_features |= CLOCK_EVT_FEAT_C3STOP; /* * Immediately configure the timer on the boot CPU, unless we need @@ -392,9 +394,6 @@ static void __init twd_local_timer_of_register(struct device_node *np) { int err; - if (!is_smp() || !setup_max_cpus) - return; - twd_ppi = irq_of_parse_and_map(np, 0); if (!twd_ppi) { err = -EINVAL; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 969f9d9e665f..bc698383e822 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -625,58 +625,6 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) set_tls(regs->ARM_r0); return 0; -#ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG - /* - * Atomically store r1 in *r2 if *r2 is equal to r0 for user space. - * Return zero in r0 if *MEM was changed or non-zero if no exchange - * happened. Also set the user C flag accordingly. - * If access permissions have to be fixed up then non-zero is - * returned and the operation has to be re-attempted. - * - * *NOTE*: This is a ghost syscall private to the kernel. Only the - * __kuser_cmpxchg code in entry-armv.S should be aware of its - * existence. Don't ever use this from user code. - */ - case NR(cmpxchg): - for (;;) { - extern void do_DataAbort(unsigned long addr, unsigned int fsr, - struct pt_regs *regs); - unsigned long val; - unsigned long addr = regs->ARM_r2; - struct mm_struct *mm = current->mm; - pgd_t *pgd; pmd_t *pmd; pte_t *pte; - spinlock_t *ptl; - - regs->ARM_cpsr &= ~PSR_C_BIT; - down_read(&mm->mmap_sem); - pgd = pgd_offset(mm, addr); - if (!pgd_present(*pgd)) - goto bad_access; - pmd = pmd_offset(pgd, addr); - if (!pmd_present(*pmd)) - goto bad_access; - pte = pte_offset_map_lock(mm, pmd, addr, &ptl); - if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) { - pte_unmap_unlock(pte, ptl); - goto bad_access; - } - val = *(unsigned long *)addr; - val -= regs->ARM_r0; - if (val == 0) { - *(unsigned long *)addr = regs->ARM_r1; - regs->ARM_cpsr |= PSR_C_BIT; - } - pte_unmap_unlock(pte, ptl); - up_read(&mm->mmap_sem); - return val; - - bad_access: - up_read(&mm->mmap_sem); - /* simulate a write access fault */ - do_DataAbort(addr, 15 + (1 << 11), regs); - } -#endif - default: /* Calls 9f00xx..9f07ff are defined to return -ENOSYS if not implemented, rather than raising SIGILL. This diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index 210eccadb69a..356970f3b25e 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -21,6 +21,7 @@ config KVM depends on MMU && OF select PREEMPT_NOTIFIERS select ANON_INODES + select ARM_GIC select HAVE_KVM_CPU_RELAX_INTERCEPT select HAVE_KVM_ARCH_TLB_FLUSH_ALL select KVM_MMIO diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index dc017adfddc8..78b286994577 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -1080,7 +1080,7 @@ static int init_hyp_mode(void) */ err = kvm_timer_hyp_init(); if (err) - goto out_free_mappings; + goto out_free_context; #ifndef CONFIG_HOTPLUG_CPU free_boot_hyp_pgd(); diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S index 970d6c043774..e936352ccb00 100644 --- a/arch/arm/lib/clear_user.S +++ b/arch/arm/lib/clear_user.S @@ -9,6 +9,7 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/unwind.h> .text @@ -20,6 +21,8 @@ */ ENTRY(__clear_user_std) WEAK(arm_clear_user) +UNWIND(.fnstart) +UNWIND(.save {r1, lr}) stmfd sp!, {r1, lr} mov r2, #0 cmp r1, #4 @@ -44,6 +47,7 @@ WEAK(arm_clear_user) USER( strnebt r2, [r0]) mov r0, #0 ldmfd sp!, {r1, pc} +UNWIND(.fnend) ENDPROC(arm_clear_user) ENDPROC(__clear_user_std) diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 4a87e86dec45..7c21760f590f 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -200,15 +200,15 @@ no_clk: args.args_count = 0; child_domain = of_genpd_get_from_provider(&args); if (IS_ERR(child_domain)) - goto next_pd; + continue; if (of_parse_phandle_with_args(np, "power-domains", "#power-domain-cells", 0, &args) != 0) - goto next_pd; + continue; parent_domain = of_genpd_get_from_provider(&args); if (IS_ERR(parent_domain)) - goto next_pd; + continue; if (pm_genpd_add_subdomain(parent_domain, child_domain)) pr_warn("%s failed to add subdomain: %s\n", @@ -216,8 +216,6 @@ no_clk: else pr_info("%s has as child subdomain: %s.\n", parent_domain->name, child_domain->name); -next_pd: - of_node_put(np); } return 0; diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index c86a5a0aefac..e20fc4178b15 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -117,11 +117,4 @@ config MACH_KIRKWOOD Say 'Y' here if you want your kernel to support boards based on the Marvell Kirkwood device tree. -config MACH_NETXBIG - bool "LaCie 2Big and 5Big Network v2" - depends on MACH_KIRKWOOD - help - Say 'Y' here if you want your kernel to support the - LaCie 2Big and 5Big Network v2 - endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index b4f01497ce0b..ecf9e0c3b107 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -13,4 +13,3 @@ endif obj-$(CONFIG_MACH_DOVE) += dove.o obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o -obj-$(CONFIG_MACH_NETXBIG) += netxbig.o diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h deleted file mode 100644 index 98e32cc2ef3d..000000000000 --- a/arch/arm/mach-mvebu/board.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Board functions for Marvell System On Chip - * - * Copyright (C) 2014 - * - * Andrew Lunn <andrew@lunn.ch> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ARCH_MVEBU_BOARD_H -#define __ARCH_MVEBU_BOARD_H - -#ifdef CONFIG_MACH_NETXBIG -void netxbig_init(void); -#else -static inline void netxbig_init(void) {}; -#endif -#endif diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 925f75f54268..f9d8e1ea7183 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -25,7 +25,6 @@ #include "kirkwood.h" #include "kirkwood-pm.h" #include "common.h" -#include "board.h" static struct resource kirkwood_cpufreq_resources[] = { [0] = { @@ -180,9 +179,6 @@ static void __init kirkwood_dt_init(void) kirkwood_pm_init(); kirkwood_dt_eth_fixup(); - if (of_machine_is_compatible("lacie,netxbig")) - netxbig_init(); - of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); } diff --git a/arch/arm/mach-mvebu/netxbig.c b/arch/arm/mach-mvebu/netxbig.c deleted file mode 100644 index 94b11b6585a4..000000000000 --- a/arch/arm/mach-mvebu/netxbig.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * arch/arm/mach-mvbu/board-netxbig.c - * - * LaCie 2Big and 5Big Network v2 board setup - * - * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/platform_data/leds-kirkwood-netxbig.h> -#include "common.h" - -/***************************************************************************** - * GPIO extension LEDs - ****************************************************************************/ - -/* - * The LEDs are controlled by a CPLD and can be configured through a GPIO - * extension bus: - * - * - address register : bit [0-2] -> GPIO [47-49] - * - data register : bit [0-2] -> GPIO [44-46] - * - enable register : GPIO 29 - */ - -static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 }; -static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 }; - -static struct netxbig_gpio_ext netxbig_v2_gpio_ext = { - .addr = netxbig_v2_gpio_ext_addr, - .num_addr = ARRAY_SIZE(netxbig_v2_gpio_ext_addr), - .data = netxbig_v2_gpio_ext_data, - .num_data = ARRAY_SIZE(netxbig_v2_gpio_ext_data), - .enable = 29, -}; - -/* - * Address register selection: - * - * addr | register - * ---------------------------- - * 0 | front LED - * 1 | front LED brightness - * 2 | SATA LED brightness - * 3 | SATA0 LED - * 4 | SATA1 LED - * 5 | SATA2 LED - * 6 | SATA3 LED - * 7 | SATA4 LED - * - * Data register configuration: - * - * data | LED brightness - * ------------------------------------------------- - * 0 | min (off) - * - | - - * 7 | max - * - * data | front LED mode - * ------------------------------------------------- - * 0 | fix off - * 1 | fix blue on - * 2 | fix red on - * 3 | blink blue on=1 sec and blue off=1 sec - * 4 | blink red on=1 sec and red off=1 sec - * 5 | blink blue on=2.5 sec and red on=0.5 sec - * 6 | blink blue on=1 sec and red on=1 sec - * 7 | blink blue on=0.5 sec and blue off=2.5 sec - * - * data | SATA LED mode - * ------------------------------------------------- - * 0 | fix off - * 1 | SATA activity blink - * 2 | fix red on - * 3 | blink blue on=1 sec and blue off=1 sec - * 4 | blink red on=1 sec and red off=1 sec - * 5 | blink blue on=2.5 sec and red on=0.5 sec - * 6 | blink blue on=1 sec and red on=1 sec - * 7 | fix blue on - */ - -static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 2, - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, - [NETXBIG_LED_TIMER1] = 4, - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, -}; - -static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 1, - [NETXBIG_LED_SATA] = NETXBIG_LED_INVALID_MODE, - [NETXBIG_LED_TIMER1] = 3, - [NETXBIG_LED_TIMER2] = 7, -}; - -static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = { - [NETXBIG_LED_OFF] = 0, - [NETXBIG_LED_ON] = 7, - [NETXBIG_LED_SATA] = 1, - [NETXBIG_LED_TIMER1] = 3, - [NETXBIG_LED_TIMER2] = NETXBIG_LED_INVALID_MODE, -}; - -static struct netxbig_led_timer netxbig_v2_led_timer[] = { - [0] = { - .delay_on = 500, - .delay_off = 500, - .mode = NETXBIG_LED_TIMER1, - }, - [1] = { - .delay_on = 500, - .delay_off = 1000, - .mode = NETXBIG_LED_TIMER2, - }, -}; - -#define NETXBIG_LED(_name, maddr, mval, baddr) \ - { .name = _name, \ - .mode_addr = maddr, \ - .mode_val = mval, \ - .bright_addr = baddr } - -static struct netxbig_led net2big_v2_leds_ctrl[] = { - NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), - NETXBIG_LED("net2big-v2:red:power", 0, netxbig_v2_red_mled, 1), - NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net2big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), - NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net2big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), -}; - -static struct netxbig_led_platform_data net2big_v2_leds_data = { - .gpio_ext = &netxbig_v2_gpio_ext, - .timer = netxbig_v2_led_timer, - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), - .leds = net2big_v2_leds_ctrl, - .num_leds = ARRAY_SIZE(net2big_v2_leds_ctrl), -}; - -static struct netxbig_led net5big_v2_leds_ctrl[] = { - NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled, 1), - NETXBIG_LED("net5big-v2:red:power", 0, netxbig_v2_red_mled, 1), - NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata0", 3, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata1", 4, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata2", 5, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata3", 6, netxbig_v2_red_mled, 2), - NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2), - NETXBIG_LED("net5big-v2:red:sata4", 7, netxbig_v2_red_mled, 2), -}; - -static struct netxbig_led_platform_data net5big_v2_leds_data = { - .gpio_ext = &netxbig_v2_gpio_ext, - .timer = netxbig_v2_led_timer, - .num_timer = ARRAY_SIZE(netxbig_v2_led_timer), - .leds = net5big_v2_leds_ctrl, - .num_leds = ARRAY_SIZE(net5big_v2_leds_ctrl), -}; - -static struct platform_device netxbig_v2_leds = { - .name = "leds-netxbig", - .id = -1, - .dev = { - .platform_data = &net2big_v2_leds_data, - }, -}; - -void __init netxbig_init(void) -{ - - if (of_machine_is_compatible("lacie,net5big_v2")) - netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data; - platform_device_register(&netxbig_v2_leds); -} diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b3a0dff67e3f..33d1460a5639 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -49,6 +49,7 @@ config SOC_OMAP5 select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER select PM_OPP if PM + select ZONE_DMA if ARM_LPAE config SOC_AM33XX bool "TI AM33XX" @@ -78,6 +79,7 @@ config SOC_DRA7XX select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER select PM_OPP if PM + select ZONE_DMA if ARM_LPAE config ARCH_OMAP2PLUS bool diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 6133eaac685d..fb219a30c10c 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -106,6 +106,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") MACHINE_END static const char *const omap36xx_boards_compat[] __initconst = { + "ti,omap3630", "ti,omap36xx", NULL, }; @@ -243,6 +244,9 @@ static const char *const omap5_boards_compat[] __initconst = { }; DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)") +#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) + .dma_zone_size = SZ_2G, +#endif .reserve = omap_reserve, .smp = smp_ops(omap4_smp_ops), .map_io = omap5_map_io, @@ -288,6 +292,9 @@ static const char *const dra74x_boards_compat[] __initconst = { }; DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)") +#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) + .dma_zone_size = SZ_2G, +#endif .reserve = omap_reserve, .smp = smp_ops(omap4_smp_ops), .map_io = dra7xx_map_io, @@ -308,6 +315,9 @@ static const char *const dra72x_boards_compat[] __initconst = { }; DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)") +#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE) + .dma_zone_size = SZ_2G, +#endif .reserve = omap_reserve, .map_io = dra7xx_map_io, .init_early = dra7xx_init_early, diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index ea56397599c2..1dfe34654c43 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -559,7 +559,14 @@ static void pdata_quirks_check(struct pdata_init *quirks) void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) { - omap_sdrc_init(NULL, NULL); + /* + * We still need this for omap2420 and omap3 PM to work, others are + * using drivers/misc/sram.c already. + */ + if (of_machine_is_compatible("ti,omap2420") || + of_machine_is_compatible("ti,omap3")) + omap_sdrc_init(NULL, NULL); + pdata_quirks_check(auxdata_quirks); of_platform_populate(NULL, omap_dt_match_table, omap_auxdata_lookup, NULL); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 06005d3f2ba3..20ce2d386f17 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -42,10 +42,6 @@ #define PECR_IS(n) ((1 << ((n) * 2)) << 29) extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)); -#ifdef CONFIG_PM - -#define ISRAM_START 0x5c000000 -#define ISRAM_SIZE SZ_256K /* * NAND NFC: DFI bus arbitration subset @@ -54,6 +50,11 @@ extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)); #define NDCR_ND_ARB_EN (1 << 12) #define NDCR_ND_ARB_CNTL (1 << 19) +#ifdef CONFIG_PM + +#define ISRAM_START 0x5c000000 +#define ISRAM_SIZE SZ_256K + static void __iomem *sram; static unsigned long wakeup_src; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index df7537f12469..c21941349b3e 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -419,28 +419,24 @@ config CPU_THUMBONLY config CPU_32v3 bool select CPU_USE_DOMAINS if MMU - select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select NEED_KUSER_HELPERS select TLS_REG_EMUL if SMP || !MMU config CPU_32v4 bool select CPU_USE_DOMAINS if MMU - select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select NEED_KUSER_HELPERS select TLS_REG_EMUL if SMP || !MMU config CPU_32v4T bool select CPU_USE_DOMAINS if MMU - select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select NEED_KUSER_HELPERS select TLS_REG_EMUL if SMP || !MMU config CPU_32v5 bool select CPU_USE_DOMAINS if MMU - select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select NEED_KUSER_HELPERS select TLS_REG_EMUL if SMP || !MMU @@ -805,14 +801,6 @@ config TLS_REG_EMUL a few prototypes like that in existence) and therefore access to that required register must be emulated. -config NEEDS_SYSCALL_FOR_CMPXCHG - bool - select NEED_KUSER_HELPERS - help - SMP on a pre-ARMv6 processor? Well OK then. - Forget about fast user space cmpxchg support. - It is just not possible. - config NEED_KUSER_HELPERS bool diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 1a7815e5421b..ad4eb2d26e16 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1407,12 +1407,19 @@ static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma, unsigned long uaddr = vma->vm_start; unsigned long usize = vma->vm_end - vma->vm_start; struct page **pages = __iommu_get_pages(cpu_addr, attrs); + unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT; + unsigned long off = vma->vm_pgoff; vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot); if (!pages) return -ENXIO; + if (off >= nr_pages || (usize >> PAGE_SHIFT) > nr_pages - off) + return -ENXIO; + + pages += off; + do { int ret = vm_insert_page(vma, uaddr, *pages++); if (ret) { diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 0d629b8f973f..daafcf121ce0 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -593,6 +593,28 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs) arm_notify_die("", regs, &info, ifsr, 0); } +/* + * Abort handler to be used only during first unmasking of asynchronous aborts + * on the boot CPU. This makes sure that the machine will not die if the + * firmware/bootloader left an imprecise abort pending for us to trip over. + */ +static int __init early_abort_handler(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) +{ + pr_warn("Hit pending asynchronous external abort (FSR=0x%08x) during " + "first unmask, this is most likely caused by a " + "firmware/bootloader bug.\n", fsr); + + return 0; +} + +void __init early_abt_enable(void) +{ + fsr_info[22].fn = early_abort_handler; + local_abt_enable(); + fsr_info[22].fn = do_bad; +} + #ifndef CONFIG_ARM_LPAE static int __init exceptions_init(void) { diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h index cf08bdfbe0d6..05ec5e0df32d 100644 --- a/arch/arm/mm/fault.h +++ b/arch/arm/mm/fault.h @@ -24,5 +24,6 @@ static inline int fsr_fs(unsigned int fsr) void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs); unsigned long search_exception_table(unsigned long addr); +void early_abt_enable(void); #endif /* __ARCH_ARM_FAULT_H */ diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 7cd15143a507..4867f5daf82c 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -38,6 +38,7 @@ #include <asm/mach/pci.h> #include <asm/fixmap.h> +#include "fault.h" #include "mm.h" #include "tcm.h" @@ -1363,6 +1364,9 @@ static void __init devicemaps_init(const struct machine_desc *mdesc) */ local_flush_tlb_all(); flush_cache_all(); + + /* Enable asynchronous aborts */ + early_abt_enable(); } static void __init kmap_init(void) diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 876060bcceeb..b8efb8cd1f73 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -614,6 +614,7 @@ load_common: case BPF_LD | BPF_B | BPF_IND: load_order = 0; load_ind: + update_on_xread(ctx); OP_IMM3(ARM_ADD, r_off, r_X, k, ctx); goto load_common; case BPF_LDX | BPF_IMM: diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 2235081a04ee..8861c367d061 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -495,7 +495,7 @@ void __init orion_ge00_switch_init(struct dsa_platform_data *d, int irq) d->netdev = &orion_ge00.dev; for (i = 0; i < d->nr_chips; i++) - d->chip[i].host_dev = &orion_ge00_shared.dev; + d->chip[i].host_dev = &orion_ge_mvmdio.dev; orion_switch_device.dev.platform_data = d; platform_device_register(&orion_switch_device); diff --git a/arch/arm/vdso/vdsomunge.c b/arch/arm/vdso/vdsomunge.c index aedec81d1198..f6455273b2f8 100644 --- a/arch/arm/vdso/vdsomunge.c +++ b/arch/arm/vdso/vdsomunge.c @@ -45,7 +45,6 @@ * it does. */ -#include <byteswap.h> #include <elf.h> #include <errno.h> #include <fcntl.h> @@ -59,6 +58,16 @@ #include <sys/types.h> #include <unistd.h> +#define swab16(x) \ + ((((x) & 0x00ff) << 8) | \ + (((x) & 0xff00) >> 8)) + +#define swab32(x) \ + ((((x) & 0x000000ff) << 24) | \ + (((x) & 0x0000ff00) << 8) | \ + (((x) & 0x00ff0000) >> 8) | \ + (((x) & 0xff000000) >> 24)) + #if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ #define HOST_ORDER ELFDATA2LSB #elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ @@ -104,17 +113,17 @@ static void cleanup(void) static Elf32_Word read_elf_word(Elf32_Word word, bool swap) { - return swap ? bswap_32(word) : word; + return swap ? swab32(word) : word; } static Elf32_Half read_elf_half(Elf32_Half half, bool swap) { - return swap ? bswap_16(half) : half; + return swap ? swab16(half) : half; } static void write_elf_word(Elf32_Word val, Elf32_Word *dst, bool swap) { - *dst = swap ? bswap_32(val) : val; + *dst = swap ? swab32(val) : val; } int main(int argc, char **argv) diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index f9914d7c1bb0..d10b5d483022 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -42,7 +42,7 @@ endif CHECKFLAGS += -D__aarch64__ ifeq ($(CONFIG_ARM64_ERRATUM_843419), y) -CFLAGS_MODULE += -mcmodel=large +KBUILD_CFLAGS_MODULE += -mcmodel=large endif # Default value diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index d831bc2ac204..fac1720472f9 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -477,6 +477,16 @@ reg = <0x0 0x7c600000 0x0 0x200000>; pmd-controller = <3>; }; + + edacl3@7e600000 { + compatible = "apm,xgene-edac-l3"; + reg = <0x0 0x7e600000 0x0 0x1000>; + }; + + edacsoc@7e930000 { + compatible = "apm,xgene-edac-soc-v1"; + reg = <0x0 0x7e930000 0x0 0x1000>; + }; }; pcie0: pcie@1f2b0000 { diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 637e046f0e36..3c386680357e 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -61,42 +61,42 @@ button@1 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <116>; label = "POWER"; gpios = <&iofpga_gpio0 0 0x4>; }; button@2 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <102>; label = "HOME"; gpios = <&iofpga_gpio0 1 0x4>; }; button@3 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <152>; label = "RLOCK"; gpios = <&iofpga_gpio0 2 0x4>; }; button@4 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <115>; label = "VOL+"; gpios = <&iofpga_gpio0 3 0x4>; }; button@5 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <114>; label = "VOL-"; gpios = <&iofpga_gpio0 4 0x4>; }; button@6 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <99>; label = "NMI"; gpios = <&iofpga_gpio0 5 0x4>; diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h index 3bc498c250dc..41e58fe3c041 100644 --- a/arch/arm64/include/asm/unistd.h +++ b/arch/arm64/include/asm/unistd.h @@ -44,7 +44,7 @@ #define __ARM_NR_compat_cacheflush (__ARM_NR_COMPAT_BASE+2) #define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE+5) -#define __NR_compat_syscalls 388 +#define __NR_compat_syscalls 390 #endif #define __ARCH_WANT_SYS_CLONE diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index cef934a90f17..5b925b761a2a 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -797,3 +797,12 @@ __SYSCALL(__NR_memfd_create, sys_memfd_create) __SYSCALL(__NR_bpf, sys_bpf) #define __NR_execveat 387 __SYSCALL(__NR_execveat, compat_sys_execveat) +#define __NR_userfaultfd 388 +__SYSCALL(__NR_userfaultfd, sys_userfaultfd) +#define __NR_membarrier 389 +__SYSCALL(__NR_membarrier, sys_membarrier) + +/* + * Please add new compat syscalls above this comment and update + * __NR_compat_syscalls in asm/unistd.h. + */ diff --git a/arch/arm64/include/uapi/asm/signal.h b/arch/arm64/include/uapi/asm/signal.h index 8d1e7236431b..991bf5db2ca1 100644 --- a/arch/arm64/include/uapi/asm/signal.h +++ b/arch/arm64/include/uapi/asm/signal.h @@ -19,6 +19,9 @@ /* Required for AArch32 compatibility. */ #define SA_RESTORER 0x04000000 +#define MINSIGSTKSZ 5120 +#define SIGSTKSZ 16384 + #include <asm-generic/signal.h> #endif diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c index bcee7abac68e..937f5e58a4d3 100644 --- a/arch/arm64/kernel/armv8_deprecated.c +++ b/arch/arm64/kernel/armv8_deprecated.c @@ -284,21 +284,23 @@ static void register_insn_emulation_sysctl(struct ctl_table *table) __asm__ __volatile__( \ ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, \ CONFIG_ARM64_PAN) \ - " mov %w2, %w1\n" \ - "0: ldxr"B" %w1, [%3]\n" \ - "1: stxr"B" %w0, %w2, [%3]\n" \ + "0: ldxr"B" %w2, [%3]\n" \ + "1: stxr"B" %w0, %w1, [%3]\n" \ " cbz %w0, 2f\n" \ " mov %w0, %w4\n" \ + " b 3f\n" \ "2:\n" \ + " mov %w1, %w2\n" \ + "3:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ - "3: mov %w0, %w5\n" \ - " b 2b\n" \ + "4: mov %w0, %w5\n" \ + " b 3b\n" \ " .popsection" \ " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ - " .quad 0b, 3b\n" \ - " .quad 1b, 3b\n" \ + " .quad 0b, 4b\n" \ + " .quad 1b, 4b\n" \ " .popsection\n" \ ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, \ CONFIG_ARM64_PAN) \ diff --git a/arch/arm64/kernel/efi-stub.c b/arch/arm64/kernel/efi-stub.c index 816120ece6bc..78dfbd34b6bf 100644 --- a/arch/arm64/kernel/efi-stub.c +++ b/arch/arm64/kernel/efi-stub.c @@ -25,10 +25,20 @@ efi_status_t __init handle_kernel_image(efi_system_table_t *sys_table_arg, unsigned long kernel_size, kernel_memsize = 0; unsigned long nr_pages; void *old_image_addr = (void *)*image_addr; + unsigned long preferred_offset; + + /* + * The preferred offset of the kernel Image is TEXT_OFFSET bytes beyond + * a 2 MB aligned base, which itself may be lower than dram_base, as + * long as the resulting offset equals or exceeds it. + */ + preferred_offset = round_down(dram_base, SZ_2M) + TEXT_OFFSET; + if (preferred_offset < dram_base) + preferred_offset += SZ_2M; /* Relocate the image, if required. */ kernel_size = _edata - _text; - if (*image_addr != (dram_base + TEXT_OFFSET)) { + if (*image_addr != preferred_offset) { kernel_memsize = kernel_size + (_end - _edata); /* @@ -42,7 +52,7 @@ efi_status_t __init handle_kernel_image(efi_system_table_t *sys_table_arg, * Mustang), we can still place the kernel at the address * 'dram_base + TEXT_OFFSET'. */ - *image_addr = *reserve_addr = dram_base + TEXT_OFFSET; + *image_addr = *reserve_addr = preferred_offset; nr_pages = round_up(kernel_memsize, EFI_ALLOC_ALIGN) / EFI_PAGE_SIZE; status = efi_call_early(allocate_pages, EFI_ALLOCATE_ADDRESS, diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index 407991bf79f5..ccb6078ed9f2 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -48,11 +48,7 @@ int notrace unwind_frame(struct stackframe *frame) frame->sp = fp + 0x10; frame->fp = *(unsigned long *)(fp); - /* - * -4 here because we care about the PC at time of bl, - * not where the return will go. - */ - frame->pc = *(unsigned long *)(fp + 8) - 4; + frame->pc = *(unsigned long *)(fp + 8); return 0; } diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c index 8297d502217e..44ca4143b013 100644 --- a/arch/arm64/kernel/suspend.c +++ b/arch/arm64/kernel/suspend.c @@ -80,17 +80,21 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) if (ret == 0) { /* * We are resuming from reset with TTBR0_EL1 set to the - * idmap to enable the MMU; restore the active_mm mappings in - * TTBR0_EL1 unless the active_mm == &init_mm, in which case - * the thread entered cpu_suspend with TTBR0_EL1 set to - * reserved TTBR0 page tables and should be restored as such. + * idmap to enable the MMU; set the TTBR0 to the reserved + * page tables to prevent speculative TLB allocations, flush + * the local tlb and set the default tcr_el1.t0sz so that + * the TTBR0 address space set-up is properly restored. + * If the current active_mm != &init_mm we entered cpu_suspend + * with mappings in TTBR0 that must be restored, so we switch + * them back to complete the address space configuration + * restoration before returning. */ - if (mm == &init_mm) - cpu_set_reserved_ttbr0(); - else - cpu_switch_mm(mm->pgd, mm); - + cpu_set_reserved_ttbr0(); flush_tlb_all(); + cpu_set_default_tcr_t0sz(); + + if (mm != &init_mm) + cpu_switch_mm(mm->pgd, mm); /* * Restore per-cpu offset before any kernel diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c index 91146b416cdb..99b0a7984950 100644 --- a/arch/avr32/boards/atngw100/mrmt.c +++ b/arch/avr32/boards/atngw100/mrmt.c @@ -21,7 +21,6 @@ #include <linux/leds_pwm.h> #include <linux/input.h> #include <linux/gpio_keys.h> -#include <linux/atmel_serial.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 8da5653bd895..e086f9e93728 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -57,7 +57,6 @@ config CRIS select ARCH_WANT_IPC_PARSE_VERSION select GENERIC_IRQ_SHOW select GENERIC_IOMAP - select GENERIC_CMOS_UPDATE select MODULES_USE_ELF_RELA select CLONE_BACKWARDS2 select OLD_SIGSUSPEND diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S index 4a146e1749c9..a4877a421756 100644 --- a/arch/cris/arch-v10/kernel/head.S +++ b/arch/cris/arch-v10/kernel/head.S @@ -354,63 +354,6 @@ no_command_line: blo 1b nop -#ifdef CONFIG_BLK_DEV_ETRAXIDE - ;; disable ATA before enabling it in genconfig below - moveq 0,$r0 - move.d $r0,[R_ATA_CTRL_DATA] - move.d $r0,[R_ATA_TRANSFER_CNT] - move.d $r0,[R_ATA_CONFIG] -#if 0 - move.d R_PORT_G_DATA, $r1 - move.d $r0, [$r1]; assert ATA bus-reset - nop - nop - nop - nop - nop - nop - move.d 0x08000000,$r0 - move.d $r0,[$r1] -#endif -#endif - -#ifdef CONFIG_JULIETTE - ;; configure external DMA channel 0 before enabling it in genconfig - - moveq 0,$r0 - move.d $r0,[R_EXT_DMA_0_ADDR] - ; cnt enable, word size, output, stop, size 0 - move.d IO_STATE (R_EXT_DMA_0_CMD, cnt, enable) \ - | IO_STATE (R_EXT_DMA_0_CMD, rqpol, ahigh) \ - | IO_STATE (R_EXT_DMA_0_CMD, apol, ahigh) \ - | IO_STATE (R_EXT_DMA_0_CMD, rq_ack, burst) \ - | IO_STATE (R_EXT_DMA_0_CMD, wid, word) \ - | IO_STATE (R_EXT_DMA_0_CMD, dir, output) \ - | IO_STATE (R_EXT_DMA_0_CMD, run, stop) \ - | IO_FIELD (R_EXT_DMA_0_CMD, trf_count, 0),$r0 - move.d $r0,[R_EXT_DMA_0_CMD] - - ;; reset dma4 and wait for completion - - moveq IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0 - move.b $r0,[R_DMA_CH4_CMD] -1: move.b [R_DMA_CH4_CMD],$r0 - and.b IO_MASK (R_DMA_CH4_CMD, cmd),$r0 - cmp.b IO_STATE (R_DMA_CH4_CMD, cmd, reset),$r0 - beq 1b - nop - - ;; reset dma5 and wait for completion - - moveq IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0 - move.b $r0,[R_DMA_CH5_CMD] -1: move.b [R_DMA_CH5_CMD],$r0 - and.b IO_MASK (R_DMA_CH5_CMD, cmd),$r0 - cmp.b IO_STATE (R_DMA_CH5_CMD, cmd, reset),$r0 - beq 1b - nop -#endif - ;; Etrax product HW genconfig setup moveq 0,$r0 @@ -447,21 +390,6 @@ no_command_line: | IO_STATE (R_GEN_CONFIG, dma9, usb),$r0 -#if defined(CONFIG_ETRAX_DEF_R_PORT_G0_DIR_OUT) - or.d IO_STATE (R_GEN_CONFIG, g0dir, out),$r0 -#endif - -#if defined(CONFIG_ETRAX_DEF_R_PORT_G8_15_DIR_OUT) - or.d IO_STATE (R_GEN_CONFIG, g8_15dir, out),$r0 -#endif -#if defined(CONFIG_ETRAX_DEF_R_PORT_G16_23_DIR_OUT) - or.d IO_STATE (R_GEN_CONFIG, g16_23dir, out),$r0 -#endif - -#if defined(CONFIG_ETRAX_DEF_R_PORT_G24_DIR_OUT) - or.d IO_STATE (R_GEN_CONFIG, g24dir, out),$r0 -#endif - move.d $r0,[genconfig_shadow] ; init a shadow register of R_GEN_CONFIG move.d $r0,[R_GEN_CONFIG] @@ -500,19 +428,9 @@ no_command_line: ;; including their shadow registers move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR,$r0 -#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7) - or.b IO_STATE (R_PORT_PA_DIR, dir7, output),$r0 -#endif move.b $r0,[port_pa_dir_shadow] move.b $r0,[R_PORT_PA_DIR] move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA,$r0 -#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PA7) -#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH) - and.b ~(1 << 7),$r0 -#else - or.b (1 << 7),$r0 -#endif -#endif move.b $r0,[port_pa_data_shadow] move.b $r0,[R_PORT_PA_DATA] @@ -520,19 +438,9 @@ no_command_line: move.b $r0,[port_pb_config_shadow] move.b $r0,[R_PORT_PB_CONFIG] move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR,$r0 -#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5) - or.b IO_STATE (R_PORT_PB_DIR, dir5, output),$r0 -#endif move.b $r0,[port_pb_dir_shadow] move.b $r0,[R_PORT_PB_DIR] move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA,$r0 -#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_PB5) -#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH) - and.b ~(1 << 5),$r0 -#else - or.b (1 << 5),$r0 -#endif -#endif move.b $r0,[port_pb_data_shadow] move.b $r0,[R_PORT_PB_DATA] @@ -541,20 +449,6 @@ no_command_line: move.d $r0, [R_PORT_PB_I2C] moveq 0,$r0 -#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G10) -#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH) - and.d ~(1 << 10),$r0 -#else - or.d (1 << 10),$r0 -#endif -#endif -#if defined(CONFIG_BLUETOOTH) && defined(CONFIG_BLUETOOTH_RESET_G11) -#if defined(CONFIG_BLUETOOTH_RESET_ACTIVE_HIGH) - and.d ~(1 << 11),$r0 -#else - or.d (1 << 11),$r0 -#endif -#endif move.d $r0,[port_g_data_shadow] move.d $r0,[R_PORT_G_DATA] diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index 22d846bfc570..ed71ade93a73 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -275,7 +275,7 @@ static char remcomOutBuffer[BUFMAX]; /* Error and warning messages. */ enum error_type { - SUCCESS, E01, E02, E03, E04, E05, E06, E07 + SUCCESS, E01, E02, E03, E04, E05, E06, E07, E08 }; static char *error_message[] = { @@ -286,7 +286,8 @@ static char *error_message[] = "E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.", "E05 Change register content - P - the register is not implemented..", "E06 Change memory content - M - internal error.", - "E07 Change register content - P - the register is not stored on the stack" + "E07 Change register content - P - the register is not stored on the stack", + "E08 Invalid parameter" }; /********************************* Register image ****************************/ /* Use the order of registers as defined in "AXIS ETRAX CRIS Programmer's @@ -351,7 +352,7 @@ char internal_stack[INTERNAL_STACK_SIZE]; breakpoint to be handled. A static breakpoint uses the content of register BRP as it is whereas a dynamic breakpoint requires subtraction with 2 in order to execute the instruction. The first breakpoint is static. */ -static unsigned char is_dyn_brkp = 0; +static unsigned char __used is_dyn_brkp; /********************************* String library ****************************/ /* Single-step over library functions creates trap loops. */ @@ -413,18 +414,6 @@ gdb_cris_strtol (const char *s, char **endptr, int base) } /********************************** Packet I/O ******************************/ -/* Returns the integer equivalent of a hexadecimal character. */ -static int -hex (char ch) -{ - if ((ch >= 'a') && (ch <= 'f')) - return (ch - 'a' + 10); - if ((ch >= '0') && (ch <= '9')) - return (ch - '0'); - if ((ch >= 'A') && (ch <= 'F')) - return (ch - 'A' + 10); - return (-1); -} /* Convert the memory, pointed to by mem into hexadecimal representation. Put the result in buf, and return a pointer to the last character @@ -455,22 +444,6 @@ mem2hex(char *buf, unsigned char *mem, int count) return (buf); } -/* Convert the array, in hexadecimal representation, pointed to by buf into - binary representation. Put the result in mem, and return a pointer to - the character after the last byte written. */ -static unsigned char* -hex2mem (unsigned char *mem, char *buf, int count) -{ - int i; - unsigned char ch; - for (i = 0; i < count; i++) { - ch = hex (*buf++) << 4; - ch = ch + hex (*buf++); - *mem++ = ch; - } - return (mem); -} - /* Put the content of the array, in binary representation, pointed to by buf into memory pointed to by mem, and return a pointer to the character after the last byte written. @@ -524,8 +497,8 @@ getpacket (char *buffer) buffer[count] = '\0'; if (ch == '#') { - xmitcsum = hex (getDebugChar ()) << 4; - xmitcsum += hex (getDebugChar ()); + xmitcsum = hex_to_bin(getDebugChar()) << 4; + xmitcsum += hex_to_bin(getDebugChar()); if (checksum != xmitcsum) { /* Wrong checksum */ putDebugChar ('-'); @@ -599,7 +572,7 @@ putDebugString (const unsigned char *str, int length) /********************************* Register image ****************************/ /* Write a value to a specified register in the register image of the current - thread. Returns status code SUCCESS, E02 or E05. */ + thread. Returns status code SUCCESS, E02, E05 or E08. */ static int write_register (int regno, char *val) { @@ -608,8 +581,9 @@ write_register (int regno, char *val) if (regno >= R0 && regno <= PC) { /* 32-bit register with simple offset. */ - hex2mem ((unsigned char *)current_reg + regno * sizeof(unsigned int), - val, sizeof(unsigned int)); + if (hex2bin((unsigned char *)current_reg + regno * sizeof(unsigned int), + val, sizeof(unsigned int))) + status = E08; } else if (regno == P0 || regno == VR || regno == P4 || regno == P8) { /* Do not support read-only registers. */ @@ -618,13 +592,15 @@ write_register (int regno, char *val) else if (regno == CCR) { /* 16 bit register with complex offset. (P4 is read-only, P6 is not implemented, and P7 (MOF) is 32 bits in ETRAX 100LX. */ - hex2mem ((unsigned char *)&(current_reg->ccr) + (regno-CCR) * sizeof(unsigned short), - val, sizeof(unsigned short)); + if (hex2bin((unsigned char *)&(current_reg->ccr) + (regno-CCR) * sizeof(unsigned short), + val, sizeof(unsigned short))) + status = E08; } else if (regno >= MOF && regno <= USP) { /* 32 bit register with complex offset. (P8 has been taken care of.) */ - hex2mem ((unsigned char *)&(current_reg->ibr) + (regno-IBR) * sizeof(unsigned int), - val, sizeof(unsigned int)); + if (hex2bin((unsigned char *)&(current_reg->ibr) + (regno-IBR) * sizeof(unsigned int), + val, sizeof(unsigned int))) + status = E08; } else { /* Do not support nonexisting or unimplemented registers (P2, P3, and P6). */ @@ -759,9 +735,11 @@ handle_exception (int sigval) /* Write registers. GXX..XX Each byte of register data is described by two hex digits. Success: OK - Failure: void. */ - hex2mem((char *)&cris_reg, &remcomInBuffer[1], sizeof(registers)); - gdb_cris_strcpy (remcomOutBuffer, "OK"); + Failure: E08. */ + if (hex2bin((char *)&cris_reg, &remcomInBuffer[1], sizeof(registers))) + gdb_cris_strcpy (remcomOutBuffer, error_message[E08]); + else + gdb_cris_strcpy (remcomOutBuffer, "OK"); break; case 'P': @@ -771,7 +749,7 @@ handle_exception (int sigval) for each byte in the register (target byte order). P1f=11223344 means set register 31 to 44332211. Success: OK - Failure: E02, E05 */ + Failure: E02, E05, E08 */ { char *suffix; int regno = gdb_cris_strtol (&remcomInBuffer[1], &suffix, 16); @@ -791,6 +769,10 @@ handle_exception (int sigval) /* Do not support non-existing registers on the stack. */ gdb_cris_strcpy (remcomOutBuffer, error_message[E07]); break; + case E08: + /* Invalid parameter. */ + gdb_cris_strcpy (remcomOutBuffer, error_message[E08]); + break; default: /* Valid register number. */ gdb_cris_strcpy (remcomOutBuffer, "OK"); @@ -826,7 +808,7 @@ handle_exception (int sigval) AA..AA is the start address, LLLL is the number of bytes, and XX..XX is the hexadecimal data. Success: OK - Failure: void. */ + Failure: E08. */ { char *lenptr; char *dataptr; @@ -835,14 +817,15 @@ handle_exception (int sigval) int length = gdb_cris_strtol(lenptr+1, &dataptr, 16); if (*lenptr == ',' && *dataptr == ':') { if (remcomInBuffer[0] == 'M') { - hex2mem(addr, dataptr + 1, length); - } - else /* X */ { + if (hex2bin(addr, dataptr + 1, length)) + gdb_cris_strcpy (remcomOutBuffer, error_message[E08]); + else + gdb_cris_strcpy (remcomOutBuffer, "OK"); + } else /* X */ { bin2mem(addr, dataptr + 1, length); + gdb_cris_strcpy (remcomOutBuffer, "OK"); } - gdb_cris_strcpy (remcomOutBuffer, "OK"); - } - else { + } else { gdb_cris_strcpy (remcomOutBuffer, error_message[E06]); } } @@ -970,7 +953,7 @@ asm ("\n" " move $ibr,[cris_reg+0x4E] ; P9,\n" " move $irp,[cris_reg+0x52] ; P10,\n" " move $srp,[cris_reg+0x56] ; P11,\n" -" move $dtp0,[cris_reg+0x5A] ; P12, register BAR, assembler might not know BAR\n" +" move $bar,[cris_reg+0x5A] ; P12,\n" " ; P13, register DCCR already saved\n" ";; Due to the old assembler-versions BRP might not be recognized\n" " .word 0xE670 ; move brp,r0\n" @@ -1063,7 +1046,7 @@ asm ("\n" " move $ibr,[cris_reg+0x4E] ; P9,\n" " move $irp,[cris_reg+0x52] ; P10,\n" " move $srp,[cris_reg+0x56] ; P11,\n" -" move $dtp0,[cris_reg+0x5A] ; P12, register BAR, assembler might not know BAR\n" +" move $bar,[cris_reg+0x5A] ; P12,\n" " ; P13, register DCCR already saved\n" ";; Due to the old assembler-versions BRP might not be recognized\n" " .word 0xE670 ; move brp,r0\n" diff --git a/arch/cris/arch-v10/mm/init.c b/arch/cris/arch-v10/mm/init.c index e7f8066105aa..85e3f1b1f3ac 100644 --- a/arch/cris/arch-v10/mm/init.c +++ b/arch/cris/arch-v10/mm/init.c @@ -68,14 +68,10 @@ paging_init(void) *R_MMU_KSEG = ( IO_STATE(R_MMU_KSEG, seg_f, seg ) | /* bootrom */ IO_STATE(R_MMU_KSEG, seg_e, page ) | - IO_STATE(R_MMU_KSEG, seg_d, page ) | - IO_STATE(R_MMU_KSEG, seg_c, page ) | + IO_STATE(R_MMU_KSEG, seg_d, page ) | + IO_STATE(R_MMU_KSEG, seg_c, page ) | IO_STATE(R_MMU_KSEG, seg_b, seg ) | /* kernel reg area */ -#ifdef CONFIG_JULIETTE - IO_STATE(R_MMU_KSEG, seg_a, seg ) | /* ARTPEC etc. */ -#else IO_STATE(R_MMU_KSEG, seg_a, page ) | -#endif IO_STATE(R_MMU_KSEG, seg_9, seg ) | /* LED's on some boards */ IO_STATE(R_MMU_KSEG, seg_8, seg ) | /* CSE0/1, flash and I/O */ IO_STATE(R_MMU_KSEG, seg_7, page ) | /* kernel vmalloc area */ @@ -92,14 +88,10 @@ paging_init(void) IO_FIELD(R_MMU_KBASE_HI, base_d, 0x0 ) | IO_FIELD(R_MMU_KBASE_HI, base_c, 0x0 ) | IO_FIELD(R_MMU_KBASE_HI, base_b, 0xb ) | -#ifdef CONFIG_JULIETTE - IO_FIELD(R_MMU_KBASE_HI, base_a, 0xa ) | -#else IO_FIELD(R_MMU_KBASE_HI, base_a, 0x0 ) | -#endif IO_FIELD(R_MMU_KBASE_HI, base_9, 0x9 ) | IO_FIELD(R_MMU_KBASE_HI, base_8, 0x8 ) ); - + *R_MMU_KBASE_LO = ( IO_FIELD(R_MMU_KBASE_LO, base_7, 0x0 ) | IO_FIELD(R_MMU_KBASE_LO, base_6, 0x4 ) | IO_FIELD(R_MMU_KBASE_LO, base_5, 0x0 ) | diff --git a/arch/cris/arch-v32/Kconfig b/arch/cris/arch-v32/Kconfig index 21bbd93be34f..17dbe03af5f4 100644 --- a/arch/cris/arch-v32/Kconfig +++ b/arch/cris/arch-v32/Kconfig @@ -11,95 +11,6 @@ config ETRAX_DRAM_VIRTUAL_BASE default "c0000000" choice - prompt "Nbr of Ethernet LED groups" - depends on ETRAX_ARCH_V32 - default ETRAX_NBR_LED_GRP_ONE - help - Select how many Ethernet LED groups that can be used. Usually one per Ethernet - interface is a good choice. - -config ETRAX_NBR_LED_GRP_ZERO - bool "Use zero LED groups" - help - Select this if you do not want any Ethernet LEDs. - -config ETRAX_NBR_LED_GRP_ONE - bool "Use one LED group" - help - Select this if you want one Ethernet LED group. This LED group - can be used for one or more Ethernet interfaces. However, it is - recommended that each Ethernet interface use a dedicated LED group. - -config ETRAX_NBR_LED_GRP_TWO - bool "Use two LED groups" - help - Select this if you want two Ethernet LED groups. This is the - best choice if you have more than one Ethernet interface and - would like to have separate LEDs for the interfaces. - -endchoice - -config ETRAX_LED_G_NET0 - string "Ethernet LED group 0 green LED bit" - depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO) - default "PA3" - help - Bit to use for the green LED in Ethernet LED group 0. - -config ETRAX_LED_R_NET0 - string "Ethernet LED group 0 red LED bit" - depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO) - default "PA4" - help - Bit to use for the red LED in Ethernet LED group 0. - -config ETRAX_LED_G_NET1 - string "Ethernet group 1 green LED bit" - depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO - default "" - help - Bit to use for the green LED in Ethernet LED group 1. - -config ETRAX_LED_R_NET1 - string "Ethernet group 1 red LED bit" - depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO - default "" - help - Bit to use for the red LED in Ethernet LED group 1. - -config ETRAX_V32_LED2G - string "Second green LED bit" - depends on ETRAX_ARCH_V32 - default "PA5" - help - Bit to use for the first green LED (status LED). - Most Axis products use bit A5 here. - -config ETRAX_V32_LED2R - string "Second red LED bit" - depends on ETRAX_ARCH_V32 - default "PA6" - help - Bit to use for the first red LED (network LED). - Most Axis products use bit A6 here. - -config ETRAX_V32_LED3G - string "Third green LED bit" - depends on ETRAX_ARCH_V32 - default "PA7" - help - Bit to use for the first green LED (drive/power LED). - Most Axis products use bit A7 here. - -config ETRAX_V32_LED3R - string "Third red LED bit" - depends on ETRAX_ARCH_V32 - default "PA7" - help - Bit to use for the first red LED (drive/power LED). - Most Axis products use bit A7 here. - -choice prompt "Kernel GDB port" depends on ETRAX_KGDB default ETRAX_KGDB_PORT0 diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index e6c523cc40bc..2735eb7671a5 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -149,173 +149,6 @@ config ETRAX_NANDBOOT Say Y if your boot code, kernel and root file system is in NAND flash. Say N if they are in NOR flash. -config ETRAX_I2C - bool "I2C driver" - depends on ETRAX_ARCH_V32 - help - This option enables the I2C driver used by e.g. the RTC driver. - -config ETRAX_V32_I2C_DATA_PORT - string "I2C data pin" - depends on ETRAX_I2C - help - The pin to use for I2C data. - -config ETRAX_V32_I2C_CLK_PORT - string "I2C clock pin" - depends on ETRAX_I2C - help - The pin to use for I2C clock. - -config ETRAX_GPIO - bool "GPIO support" - depends on ETRAX_ARCH_V32 - ---help--- - Enables the ETRAX general port device (major 120, minors 0-4). - You can use this driver to access the general port bits. It supports - these ioctl's: - #include <linux/etraxgpio.h> - fd = open("/dev/gpioa", O_RDWR); // or /dev/gpiob - ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_SETBITS), bits_to_set); - ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_CLRBITS), bits_to_clear); - err = ioctl(fd, _IO(ETRAXGPIO_IOCTYPE, IO_READ_INBITS), &val); - Remember that you need to setup the port directions appropriately in - the General configuration. - -config ETRAX_VIRTUAL_GPIO - bool "Virtual GPIO support" - depends on ETRAX_GPIO - help - Enables the virtual Etrax general port device (major 120, minor 6). - It uses an I/O expander for the I2C-bus. - -config ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN - int "Virtual GPIO interrupt pin on PA pin" - range 0 7 - depends on ETRAX_VIRTUAL_GPIO - help - The pin to use on PA for virtual gpio interrupt. - -config ETRAX_PA_CHANGEABLE_DIR - hex "PA user changeable dir mask" - depends on ETRAX_GPIO - default "0x00" if ETRAXFS - default "0x00000000" if !ETRAXFS - help - This is a bitmask with information of what bits in PA that a - user can change direction on using ioctl's. - Bit set = changeable. - You probably want 0 here, but it depends on your hardware. - -config ETRAX_PA_CHANGEABLE_BITS - hex "PA user changeable bits mask" - depends on ETRAX_GPIO - default "0x00" if ETRAXFS - default "0x00000000" if !ETRAXFS - help - This is a bitmask with information of what bits in PA - that a user can change the value on using ioctl's. - Bit set = changeable. - -config ETRAX_PB_CHANGEABLE_DIR - hex "PB user changeable dir mask" - depends on ETRAX_GPIO - default "0x00000" if ETRAXFS - default "0x00000000" if !ETRAXFS - help - This is a bitmask with information of what bits in PB - that a user can change direction on using ioctl's. - Bit set = changeable. - You probably want 0 here, but it depends on your hardware. - -config ETRAX_PB_CHANGEABLE_BITS - hex "PB user changeable bits mask" - depends on ETRAX_GPIO - default "0x00000" if ETRAXFS - default "0x00000000" if !ETRAXFS - help - This is a bitmask with information of what bits in PB - that a user can change the value on using ioctl's. - Bit set = changeable. - -config ETRAX_PC_CHANGEABLE_DIR - hex "PC user changeable dir mask" - depends on ETRAX_GPIO - default "0x00000" if ETRAXFS - default "0x00000000" if !ETRAXFS - help - This is a bitmask with information of what bits in PC - that a user can change direction on using ioctl's. - Bit set = changeable. - You probably want 0 here, but it depends on your hardware. - -config ETRAX_PC_CHANGEABLE_BITS - hex "PC user changeable bits mask" - depends on ETRAX_GPIO - default "0x00000" if ETRAXFS - default "0x00000000" if !ETRAXFS - help - This is a bitmask with information of what bits in PC - that a user can change the value on using ioctl's. - Bit set = changeable. - -config ETRAX_PD_CHANGEABLE_DIR - hex "PD user changeable dir mask" - depends on ETRAX_GPIO && ETRAXFS - default "0x00000" - help - This is a bitmask with information of what bits in PD - that a user can change direction on using ioctl's. - Bit set = changeable. - You probably want 0x00000 here, but it depends on your hardware. - -config ETRAX_PD_CHANGEABLE_BITS - hex "PD user changeable bits mask" - depends on ETRAX_GPIO && ETRAXFS - default "0x00000" - help - This is a bitmask (18 bits) with information of what bits in PD - that a user can change the value on using ioctl's. - Bit set = changeable. - -config ETRAX_PE_CHANGEABLE_DIR - hex "PE user changeable dir mask" - depends on ETRAX_GPIO && ETRAXFS - default "0x00000" - help - This is a bitmask (18 bits) with information of what bits in PE - that a user can change direction on using ioctl's. - Bit set = changeable. - You probably want 0x00000 here, but it depends on your hardware. - -config ETRAX_PE_CHANGEABLE_BITS - hex "PE user changeable bits mask" - depends on ETRAX_GPIO && ETRAXFS - default "0x00000" - help - This is a bitmask (18 bits) with information of what bits in PE - that a user can change the value on using ioctl's. - Bit set = changeable. - -config ETRAX_PV_CHANGEABLE_DIR - hex "PV user changeable dir mask" - depends on ETRAX_VIRTUAL_GPIO - default "0x0000" - help - This is a bitmask (16 bits) with information of what bits in PV - that a user can change direction on using ioctl's. - Bit set = changeable. - You probably want 0x0000 here, but it depends on your hardware. - -config ETRAX_PV_CHANGEABLE_BITS - hex "PV user changeable bits mask" - depends on ETRAX_VIRTUAL_GPIO - default "0x0000" - help - This is a bitmask (16 bits) with information of what bits in PV - that a user can change the value on using ioctl's. - Bit set = changeable. - config ETRAX_CARDBUS bool "Cardbus support" depends on ETRAX_ARCH_V32 diff --git a/arch/cris/arch-v32/drivers/Makefile b/arch/cris/arch-v32/drivers/Makefile index 15fbfefced2c..b5a75fdce77b 100644 --- a/arch/cris/arch-v32/drivers/Makefile +++ b/arch/cris/arch-v32/drivers/Makefile @@ -7,6 +7,5 @@ obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o obj-$(CONFIG_ETRAXFS) += mach-fs/ obj-$(CONFIG_CRIS_MACH_ARTPEC3) += mach-a3/ obj-$(CONFIG_ETRAX_IOP_FW_LOAD) += iop_fw_load.o -obj-$(CONFIG_ETRAX_I2C) += i2c.o obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o obj-$(CONFIG_PCI) += pci/ diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c index 5387424683cc..c6309a182f46 100644 --- a/arch/cris/arch-v32/drivers/axisflashmap.c +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -361,7 +361,7 @@ static int __init init_axis_flash(void) #if 0 /* Dump flash memory so we can see what is going on */ if (main_mtd) { - int sectoraddr, i; + int sectoraddr; for (sectoraddr = 0; sectoraddr < 2*65536+4096; sectoraddr += PAGESIZE) { main_mtd->read(main_mtd, sectoraddr, PAGESIZE, &len, @@ -369,21 +369,7 @@ static int __init init_axis_flash(void) printk(KERN_INFO "Sector at %d (length %d):\n", sectoraddr, len); - for (i = 0; i < PAGESIZE; i += 16) { - printk(KERN_INFO - "%02x %02x %02x %02x " - "%02x %02x %02x %02x " - "%02x %02x %02x %02x " - "%02x %02x %02x %02x\n", - page[i] & 255, page[i+1] & 255, - page[i+2] & 255, page[i+3] & 255, - page[i+4] & 255, page[i+5] & 255, - page[i+6] & 255, page[i+7] & 255, - page[i+8] & 255, page[i+9] & 255, - page[i+10] & 255, page[i+11] & 255, - page[i+12] & 255, page[i+13] & 255, - page[i+14] & 255, page[i+15] & 255); - } + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1, page, PAGESIZE, false); } } #endif @@ -417,25 +403,11 @@ static int __init init_axis_flash(void) #if 0 /* Dump partition table so we can see what is going on */ printk(KERN_INFO - "axisflashmap: flash read %d bytes at 0x%08x, data: " - "%02x %02x %02x %02x %02x %02x %02x %02x\n", - len, CONFIG_ETRAX_PTABLE_SECTOR, - page[0] & 255, page[1] & 255, - page[2] & 255, page[3] & 255, - page[4] & 255, page[5] & 255, - page[6] & 255, page[7] & 255); + "axisflashmap: flash read %d bytes at 0x%08x, data: %8ph\n", + len, CONFIG_ETRAX_PTABLE_SECTOR, page); printk(KERN_INFO - "axisflashmap: partition table offset %d, data: " - "%02x %02x %02x %02x %02x %02x %02x %02x\n", - PARTITION_TABLE_OFFSET, - page[PARTITION_TABLE_OFFSET+0] & 255, - page[PARTITION_TABLE_OFFSET+1] & 255, - page[PARTITION_TABLE_OFFSET+2] & 255, - page[PARTITION_TABLE_OFFSET+3] & 255, - page[PARTITION_TABLE_OFFSET+4] & 255, - page[PARTITION_TABLE_OFFSET+5] & 255, - page[PARTITION_TABLE_OFFSET+6] & 255, - page[PARTITION_TABLE_OFFSET+7] & 255); + "axisflashmap: partition table offset %d, data: %8ph\n", + PARTITION_TABLE_OFFSET, page + PARTITION_TABLE_OFFSET); #endif } diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c deleted file mode 100644 index 3b2c82ce8147..000000000000 --- a/arch/cris/arch-v32/drivers/i2c.c +++ /dev/null @@ -1,751 +0,0 @@ -/*!*************************************************************************** -*! -*! FILE NAME : i2c.c -*! -*! DESCRIPTION: implements an interface for IIC/I2C, both directly from other -*! kernel modules (i2c_writereg/readreg) and from userspace using -*! ioctl()'s -*! -*! Nov 30 1998 Torbjorn Eliasson Initial version. -*! Bjorn Wesen Elinux kernel version. -*! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff - -*! don't use PB_I2C if DS1302 uses same bits, -*! use PB. -*| June 23 2003 Pieter Grimmerink Added 'i2c_sendnack'. i2c_readreg now -*| generates nack on last received byte, -*| instead of ack. -*| i2c_getack changed data level while clock -*| was high, causing DS75 to see a stop condition -*! -*! --------------------------------------------------------------------------- -*! -*! (C) Copyright 1999-2007 Axis Communications AB, LUND, SWEDEN -*! -*!***************************************************************************/ - -/****************** INCLUDE FILES SECTION ***********************************/ - -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/fs.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/mutex.h> - -#include <asm/etraxi2c.h> - -#include <asm/io.h> -#include <asm/delay.h> - -#include "i2c.h" - -/****************** I2C DEFINITION SECTION *************************/ - -#define D(x) - -#define I2C_MAJOR 123 /* LOCAL/EXPERIMENTAL */ -static DEFINE_MUTEX(i2c_mutex); -static const char i2c_name[] = "i2c"; - -#define CLOCK_LOW_TIME 8 -#define CLOCK_HIGH_TIME 8 -#define START_CONDITION_HOLD_TIME 8 -#define STOP_CONDITION_HOLD_TIME 8 -#define ENABLE_OUTPUT 0x01 -#define ENABLE_INPUT 0x00 -#define I2C_CLOCK_HIGH 1 -#define I2C_CLOCK_LOW 0 -#define I2C_DATA_HIGH 1 -#define I2C_DATA_LOW 0 - -#define i2c_enable() -#define i2c_disable() - -/* enable or disable output-enable, to select output or input on the i2c bus */ - -#define i2c_dir_out() crisv32_io_set_dir(&cris_i2c_data, crisv32_io_dir_out) -#define i2c_dir_in() crisv32_io_set_dir(&cris_i2c_data, crisv32_io_dir_in) - -/* control the i2c clock and data signals */ - -#define i2c_clk(x) crisv32_io_set(&cris_i2c_clk, x) -#define i2c_data(x) crisv32_io_set(&cris_i2c_data, x) - -/* read a bit from the i2c interface */ - -#define i2c_getbit() crisv32_io_rd(&cris_i2c_data) - -#define i2c_delay(usecs) udelay(usecs) - -static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */ - -/****************** VARIABLE SECTION ************************************/ - -static struct crisv32_iopin cris_i2c_clk; -static struct crisv32_iopin cris_i2c_data; - -/****************** FUNCTION DEFINITION SECTION *************************/ - - -/* generate i2c start condition */ - -void -i2c_start(void) -{ - /* - * SCL=1 SDA=1 - */ - i2c_dir_out(); - i2c_delay(CLOCK_HIGH_TIME/6); - i2c_data(I2C_DATA_HIGH); - i2c_clk(I2C_CLOCK_HIGH); - i2c_delay(CLOCK_HIGH_TIME); - /* - * SCL=1 SDA=0 - */ - i2c_data(I2C_DATA_LOW); - i2c_delay(START_CONDITION_HOLD_TIME); - /* - * SCL=0 SDA=0 - */ - i2c_clk(I2C_CLOCK_LOW); - i2c_delay(CLOCK_LOW_TIME); -} - -/* generate i2c stop condition */ - -void -i2c_stop(void) -{ - i2c_dir_out(); - - /* - * SCL=0 SDA=0 - */ - i2c_clk(I2C_CLOCK_LOW); - i2c_data(I2C_DATA_LOW); - i2c_delay(CLOCK_LOW_TIME*2); - /* - * SCL=1 SDA=0 - */ - i2c_clk(I2C_CLOCK_HIGH); - i2c_delay(CLOCK_HIGH_TIME*2); - /* - * SCL=1 SDA=1 - */ - i2c_data(I2C_DATA_HIGH); - i2c_delay(STOP_CONDITION_HOLD_TIME); - - i2c_dir_in(); -} - -/* write a byte to the i2c interface */ - -void -i2c_outbyte(unsigned char x) -{ - int i; - - i2c_dir_out(); - - for (i = 0; i < 8; i++) { - if (x & 0x80) { - i2c_data(I2C_DATA_HIGH); - } else { - i2c_data(I2C_DATA_LOW); - } - - i2c_delay(CLOCK_LOW_TIME/2); - i2c_clk(I2C_CLOCK_HIGH); - i2c_delay(CLOCK_HIGH_TIME); - i2c_clk(I2C_CLOCK_LOW); - i2c_delay(CLOCK_LOW_TIME/2); - x <<= 1; - } - i2c_data(I2C_DATA_LOW); - i2c_delay(CLOCK_LOW_TIME/2); - - /* - * enable input - */ - i2c_dir_in(); -} - -/* read a byte from the i2c interface */ - -unsigned char -i2c_inbyte(void) -{ - unsigned char aBitByte = 0; - int i; - - /* Switch off I2C to get bit */ - i2c_disable(); - i2c_dir_in(); - i2c_delay(CLOCK_HIGH_TIME/2); - - /* Get bit */ - aBitByte |= i2c_getbit(); - - /* Enable I2C */ - i2c_enable(); - i2c_delay(CLOCK_LOW_TIME/2); - - for (i = 1; i < 8; i++) { - aBitByte <<= 1; - /* Clock pulse */ - i2c_clk(I2C_CLOCK_HIGH); - i2c_delay(CLOCK_HIGH_TIME); - i2c_clk(I2C_CLOCK_LOW); - i2c_delay(CLOCK_LOW_TIME); - - /* Switch off I2C to get bit */ - i2c_disable(); - i2c_dir_in(); - i2c_delay(CLOCK_HIGH_TIME/2); - - /* Get bit */ - aBitByte |= i2c_getbit(); - - /* Enable I2C */ - i2c_enable(); - i2c_delay(CLOCK_LOW_TIME/2); - } - i2c_clk(I2C_CLOCK_HIGH); - i2c_delay(CLOCK_HIGH_TIME); - - /* - * we leave the clock low, getbyte is usually followed - * by sendack/nack, they assume the clock to be low - */ - i2c_clk(I2C_CLOCK_LOW); - return aBitByte; -} - -/*#--------------------------------------------------------------------------- -*# -*# FUNCTION NAME: i2c_getack -*# -*# DESCRIPTION : checks if ack was received from ic2 -*# -*#--------------------------------------------------------------------------*/ - -int -i2c_getack(void) -{ - int ack = 1; - /* - * enable output - */ - i2c_dir_out(); - /* - * Release data bus by setting - * data high - */ - i2c_data(I2C_DATA_HIGH); - /* - * enable input - */ - i2c_dir_in(); - i2c_delay(CLOCK_HIGH_TIME/4); - /* - * generate ACK clock pulse - */ - i2c_clk(I2C_CLOCK_HIGH); -#if 0 - /* - * Use PORT PB instead of I2C - * for input. (I2C not working) - */ - i2c_clk(1); - i2c_data(1); - /* - * switch off I2C - */ - i2c_data(1); - i2c_disable(); - i2c_dir_in(); -#endif - - /* - * now wait for ack - */ - i2c_delay(CLOCK_HIGH_TIME/2); - /* - * check for ack - */ - if (i2c_getbit()) - ack = 0; - i2c_delay(CLOCK_HIGH_TIME/2); - if (!ack) { - if (!i2c_getbit()) /* receiver pulld SDA low */ - ack = 1; - i2c_delay(CLOCK_HIGH_TIME/2); - } - - /* - * our clock is high now, make sure data is low - * before we enable our output. If we keep data high - * and enable output, we would generate a stop condition. - */ -#if 0 - i2c_data(I2C_DATA_LOW); - - /* - * end clock pulse - */ - i2c_enable(); - i2c_dir_out(); -#endif - i2c_clk(I2C_CLOCK_LOW); - i2c_delay(CLOCK_HIGH_TIME/4); - /* - * enable output - */ - i2c_dir_out(); - /* - * remove ACK clock pulse - */ - i2c_data(I2C_DATA_HIGH); - i2c_delay(CLOCK_LOW_TIME/2); - return ack; -} - -/*#--------------------------------------------------------------------------- -*# -*# FUNCTION NAME: I2C::sendAck -*# -*# DESCRIPTION : Send ACK on received data -*# -*#--------------------------------------------------------------------------*/ -void -i2c_sendack(void) -{ - /* - * enable output - */ - i2c_delay(CLOCK_LOW_TIME); - i2c_dir_out(); - /* - * set ack pulse high - */ - i2c_data(I2C_DATA_LOW); - /* - * generate clock pulse - */ - i2c_delay(CLOCK_HIGH_TIME/6); - i2c_clk(I2C_CLOCK_HIGH); - i2c_delay(CLOCK_HIGH_TIME); - i2c_clk(I2C_CLOCK_LOW); - i2c_delay(CLOCK_LOW_TIME/6); - /* - * reset data out - */ - i2c_data(I2C_DATA_HIGH); - i2c_delay(CLOCK_LOW_TIME); - - i2c_dir_in(); -} - -/*#--------------------------------------------------------------------------- -*# -*# FUNCTION NAME: i2c_sendnack -*# -*# DESCRIPTION : Sends NACK on received data -*# -*#--------------------------------------------------------------------------*/ -void -i2c_sendnack(void) -{ - /* - * enable output - */ - i2c_delay(CLOCK_LOW_TIME); - i2c_dir_out(); - /* - * set data high - */ - i2c_data(I2C_DATA_HIGH); - /* - * generate clock pulse - */ - i2c_delay(CLOCK_HIGH_TIME/6); - i2c_clk(I2C_CLOCK_HIGH); - i2c_delay(CLOCK_HIGH_TIME); - i2c_clk(I2C_CLOCK_LOW); - i2c_delay(CLOCK_LOW_TIME); - - i2c_dir_in(); -} - -/*#--------------------------------------------------------------------------- -*# -*# FUNCTION NAME: i2c_write -*# -*# DESCRIPTION : Writes a value to an I2C device -*# -*#--------------------------------------------------------------------------*/ -int -i2c_write(unsigned char theSlave, void *data, size_t nbytes) -{ - int error, cntr = 3; - unsigned char bytes_wrote = 0; - unsigned char value; - unsigned long flags; - - spin_lock_irqsave(&i2c_lock, flags); - - do { - error = 0; - - i2c_start(); - /* - * send slave address - */ - i2c_outbyte((theSlave & 0xfe)); - /* - * wait for ack - */ - if (!i2c_getack()) - error = 1; - /* - * send data - */ - for (bytes_wrote = 0; bytes_wrote < nbytes; bytes_wrote++) { - memcpy(&value, data + bytes_wrote, sizeof value); - i2c_outbyte(value); - /* - * now it's time to wait for ack - */ - if (!i2c_getack()) - error |= 4; - } - /* - * end byte stream - */ - i2c_stop(); - - } while (error && cntr--); - - i2c_delay(CLOCK_LOW_TIME); - - spin_unlock_irqrestore(&i2c_lock, flags); - - return -error; -} - -/*#--------------------------------------------------------------------------- -*# -*# FUNCTION NAME: i2c_read -*# -*# DESCRIPTION : Reads a value from an I2C device -*# -*#--------------------------------------------------------------------------*/ -int -i2c_read(unsigned char theSlave, void *data, size_t nbytes) -{ - unsigned char b = 0; - unsigned char bytes_read = 0; - int error, cntr = 3; - unsigned long flags; - - spin_lock_irqsave(&i2c_lock, flags); - - do { - error = 0; - memset(data, 0, nbytes); - /* - * generate start condition - */ - i2c_start(); - /* - * send slave address - */ - i2c_outbyte((theSlave | 0x01)); - /* - * wait for ack - */ - if (!i2c_getack()) - error = 1; - /* - * fetch data - */ - for (bytes_read = 0; bytes_read < nbytes; bytes_read++) { - b = i2c_inbyte(); - memcpy(data + bytes_read, &b, sizeof b); - - if (bytes_read < (nbytes - 1)) - i2c_sendack(); - } - /* - * last received byte needs to be nacked - * instead of acked - */ - i2c_sendnack(); - /* - * end sequence - */ - i2c_stop(); - } while (error && cntr--); - - spin_unlock_irqrestore(&i2c_lock, flags); - - return -error; -} - -/*#--------------------------------------------------------------------------- -*# -*# FUNCTION NAME: i2c_writereg -*# -*# DESCRIPTION : Writes a value to an I2C device -*# -*#--------------------------------------------------------------------------*/ -int -i2c_writereg(unsigned char theSlave, unsigned char theReg, - unsigned char theValue) -{ - int error, cntr = 3; - unsigned long flags; - - spin_lock_irqsave(&i2c_lock, flags); - - do { - error = 0; - - i2c_start(); - /* - * send slave address - */ - i2c_outbyte((theSlave & 0xfe)); - /* - * wait for ack - */ - if(!i2c_getack()) - error = 1; - /* - * now select register - */ - i2c_dir_out(); - i2c_outbyte(theReg); - /* - * now it's time to wait for ack - */ - if(!i2c_getack()) - error |= 2; - /* - * send register register data - */ - i2c_outbyte(theValue); - /* - * now it's time to wait for ack - */ - if(!i2c_getack()) - error |= 4; - /* - * end byte stream - */ - i2c_stop(); - } while(error && cntr--); - - i2c_delay(CLOCK_LOW_TIME); - - spin_unlock_irqrestore(&i2c_lock, flags); - - return -error; -} - -/*#--------------------------------------------------------------------------- -*# -*# FUNCTION NAME: i2c_readreg -*# -*# DESCRIPTION : Reads a value from the decoder registers. -*# -*#--------------------------------------------------------------------------*/ -unsigned char -i2c_readreg(unsigned char theSlave, unsigned char theReg) -{ - unsigned char b = 0; - int error, cntr = 3; - unsigned long flags; - - spin_lock_irqsave(&i2c_lock, flags); - - do { - error = 0; - /* - * generate start condition - */ - i2c_start(); - - /* - * send slave address - */ - i2c_outbyte((theSlave & 0xfe)); - /* - * wait for ack - */ - if(!i2c_getack()) - error = 1; - /* - * now select register - */ - i2c_dir_out(); - i2c_outbyte(theReg); - /* - * now it's time to wait for ack - */ - if(!i2c_getack()) - error |= 2; - /* - * repeat start condition - */ - i2c_delay(CLOCK_LOW_TIME); - i2c_start(); - /* - * send slave address - */ - i2c_outbyte(theSlave | 0x01); - /* - * wait for ack - */ - if(!i2c_getack()) - error |= 4; - /* - * fetch register - */ - b = i2c_inbyte(); - /* - * last received byte needs to be nacked - * instead of acked - */ - i2c_sendnack(); - /* - * end sequence - */ - i2c_stop(); - - } while(error && cntr--); - - spin_unlock_irqrestore(&i2c_lock, flags); - - return b; -} - -static int -i2c_open(struct inode *inode, struct file *filp) -{ - return 0; -} - -static int -i2c_release(struct inode *inode, struct file *filp) -{ - return 0; -} - -/* Main device API. ioctl's to write or read to/from i2c registers. - */ - -static long -i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - int ret; - if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) { - return -ENOTTY; - } - - switch (_IOC_NR(cmd)) { - case I2C_WRITEREG: - /* write to an i2c slave */ - D(printk("i2cw %d %d %d\n", - I2C_ARGSLAVE(arg), - I2C_ARGREG(arg), - I2C_ARGVALUE(arg))); - - mutex_lock(&i2c_mutex); - ret = i2c_writereg(I2C_ARGSLAVE(arg), - I2C_ARGREG(arg), - I2C_ARGVALUE(arg)); - mutex_unlock(&i2c_mutex); - return ret; - - case I2C_READREG: - { - unsigned char val; - /* read from an i2c slave */ - D(printk("i2cr %d %d ", - I2C_ARGSLAVE(arg), - I2C_ARGREG(arg))); - mutex_lock(&i2c_mutex); - val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg)); - mutex_unlock(&i2c_mutex); - D(printk("= %d\n", val)); - return val; - } - default: - return -EINVAL; - - } - - return 0; -} - -static const struct file_operations i2c_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = i2c_ioctl, - .open = i2c_open, - .release = i2c_release, - .llseek = noop_llseek, -}; - -static int __init i2c_init(void) -{ - static int res; - static int first = 1; - - if (!first) - return res; - - first = 0; - - /* Setup and enable the DATA and CLK pins */ - - res = crisv32_io_get_name(&cris_i2c_data, - CONFIG_ETRAX_V32_I2C_DATA_PORT); - if (res < 0) - return res; - - res = crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_V32_I2C_CLK_PORT); - crisv32_io_set_dir(&cris_i2c_clk, crisv32_io_dir_out); - - return res; -} - - -static int __init i2c_register(void) -{ - int res; - - res = i2c_init(); - if (res < 0) - return res; - - /* register char device */ - - res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops); - if (res < 0) { - printk(KERN_ERR "i2c: couldn't get a major number.\n"); - return res; - } - - printk(KERN_INFO - "I2C driver v2.2, (c) 1999-2007 Axis Communications AB\n"); - - return 0; -} -/* this makes sure that i2c_init is called during boot */ -module_init(i2c_register); - -/****************** END OF FILE i2c.c ********************************/ diff --git a/arch/cris/arch-v32/drivers/i2c.h b/arch/cris/arch-v32/drivers/i2c.h deleted file mode 100644 index d9cc856f89fb..000000000000 --- a/arch/cris/arch-v32/drivers/i2c.h +++ /dev/null @@ -1,16 +0,0 @@ - -#include <linux/init.h> - -/* High level I2C actions */ -int i2c_write(unsigned char theSlave, void *data, size_t nbytes); -int i2c_read(unsigned char theSlave, void *data, size_t nbytes); -int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue); -unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg); - -/* Low level I2C */ -void i2c_start(void); -void i2c_stop(void); -void i2c_outbyte(unsigned char x); -unsigned char i2c_inbyte(void); -int i2c_getack(void); -void i2c_sendack(void); diff --git a/arch/cris/arch-v32/drivers/mach-a3/Makefile b/arch/cris/arch-v32/drivers/mach-a3/Makefile index 5c6d2a2a080e..59028d0b981c 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/Makefile +++ b/arch/cris/arch-v32/drivers/mach-a3/Makefile @@ -3,4 +3,3 @@ # obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o -obj-$(CONFIG_ETRAX_GPIO) += gpio.o diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c deleted file mode 100644 index c92e1da3684d..000000000000 --- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c +++ /dev/null @@ -1,999 +0,0 @@ -/* - * Artec-3 general port I/O device - * - * Copyright (c) 2007 Axis Communications AB - * - * Authors: Bjorn Wesen (initial version) - * Ola Knutsson (LED handling) - * Johan Adolfsson (read/set directions, write, port G, - * port to ETRAX FS. - * Ricard Wanderlof (PWM for Artpec-3) - * - */ - -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/fs.h> -#include <linux/string.h> -#include <linux/poll.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/mutex.h> - -#include <asm/etraxgpio.h> -#include <hwregs/reg_map.h> -#include <hwregs/reg_rdwr.h> -#include <hwregs/gio_defs.h> -#include <hwregs/intr_vect_defs.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <mach/pinmux.h> - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -#include "../i2c.h" - -#define VIRT_I2C_ADDR 0x40 -#endif - -/* The following gio ports on ARTPEC-3 is available: - * pa 32 bits - * pb 32 bits - * pc 16 bits - * each port has a rw_px_dout, r_px_din and rw_px_oe register. - */ - -#define GPIO_MAJOR 120 /* experimental MAJOR number */ - -#define I2C_INTERRUPT_BITS 0x300 /* i2c0_done and i2c1_done bits */ - -#define D(x) - -#if 0 -static int dp_cnt; -#define DP(x) \ - do { \ - dp_cnt++; \ - if (dp_cnt % 1000 == 0) \ - x; \ - } while (0) -#else -#define DP(x) -#endif - -static DEFINE_MUTEX(gpio_mutex); -static char gpio_name[] = "etrax gpio"; - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, - unsigned long arg); -#endif -static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg); -static ssize_t gpio_write(struct file *file, const char __user *buf, - size_t count, loff_t *off); -static int gpio_open(struct inode *inode, struct file *filp); -static int gpio_release(struct inode *inode, struct file *filp); -static unsigned int gpio_poll(struct file *filp, - struct poll_table_struct *wait); - -/* private data per open() of this driver */ - -struct gpio_private { - struct gpio_private *next; - /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */ - unsigned char clk_mask; - unsigned char data_mask; - unsigned char write_msb; - unsigned char pad1; - /* These fields are generic */ - unsigned long highalarm, lowalarm; - wait_queue_head_t alarm_wq; - int minor; -}; - -static void gpio_set_alarm(struct gpio_private *priv); -static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg); -static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, - unsigned long arg); - - -/* linked list of alarms to check for */ - -static struct gpio_private *alarmlist; - -static int wanted_interrupts; - -static DEFINE_SPINLOCK(gpio_lock); - -#define NUM_PORTS (GPIO_MINOR_LAST+1) -#define GIO_REG_RD_ADDR(reg) \ - (unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg) -#define GIO_REG_WR_ADDR(reg) \ - (unsigned long *)(regi_gio + REG_WR_ADDR_gio_##reg) -static unsigned long led_dummy; -static unsigned long port_d_dummy; /* Only input on Artpec-3 */ -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static unsigned long port_e_dummy; /* Non existent on Artpec-3 */ -static unsigned long virtual_dummy; -static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE; -static unsigned short cached_virtual_gpio_read; -#endif - -static unsigned long *data_out[NUM_PORTS] = { - GIO_REG_WR_ADDR(rw_pa_dout), - GIO_REG_WR_ADDR(rw_pb_dout), - &led_dummy, - GIO_REG_WR_ADDR(rw_pc_dout), - &port_d_dummy, -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - &port_e_dummy, - &virtual_dummy, -#endif -}; - -static unsigned long *data_in[NUM_PORTS] = { - GIO_REG_RD_ADDR(r_pa_din), - GIO_REG_RD_ADDR(r_pb_din), - &led_dummy, - GIO_REG_RD_ADDR(r_pc_din), - GIO_REG_RD_ADDR(r_pd_din), -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - &port_e_dummy, - &virtual_dummy, -#endif -}; - -static unsigned long changeable_dir[NUM_PORTS] = { - CONFIG_ETRAX_PA_CHANGEABLE_DIR, - CONFIG_ETRAX_PB_CHANGEABLE_DIR, - 0, - CONFIG_ETRAX_PC_CHANGEABLE_DIR, - 0, -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - 0, - CONFIG_ETRAX_PV_CHANGEABLE_DIR, -#endif -}; - -static unsigned long changeable_bits[NUM_PORTS] = { - CONFIG_ETRAX_PA_CHANGEABLE_BITS, - CONFIG_ETRAX_PB_CHANGEABLE_BITS, - 0, - CONFIG_ETRAX_PC_CHANGEABLE_BITS, - 0, -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - 0, - CONFIG_ETRAX_PV_CHANGEABLE_BITS, -#endif -}; - -static unsigned long *dir_oe[NUM_PORTS] = { - GIO_REG_WR_ADDR(rw_pa_oe), - GIO_REG_WR_ADDR(rw_pb_oe), - &led_dummy, - GIO_REG_WR_ADDR(rw_pc_oe), - &port_d_dummy, -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - &port_e_dummy, - &virtual_rw_pv_oe, -#endif -}; - -static void gpio_set_alarm(struct gpio_private *priv) -{ - int bit; - int intr_cfg; - int mask; - int pins; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - intr_cfg = REG_RD_INT(gio, regi_gio, rw_intr_cfg); - pins = REG_RD_INT(gio, regi_gio, rw_intr_pins); - mask = REG_RD_INT(gio, regi_gio, rw_intr_mask) & I2C_INTERRUPT_BITS; - - for (bit = 0; bit < 32; bit++) { - int intr = bit % 8; - int pin = bit / 8; - if (priv->minor < GPIO_MINOR_LEDS) - pin += priv->minor * 4; - else - pin += (priv->minor - 1) * 4; - - if (priv->highalarm & (1<<bit)) { - intr_cfg |= (regk_gio_hi << (intr * 3)); - mask |= 1 << intr; - wanted_interrupts = mask & 0xff; - pins |= pin << (intr * 4); - } else if (priv->lowalarm & (1<<bit)) { - intr_cfg |= (regk_gio_lo << (intr * 3)); - mask |= 1 << intr; - wanted_interrupts = mask & 0xff; - pins |= pin << (intr * 4); - } - } - - REG_WR_INT(gio, regi_gio, rw_intr_cfg, intr_cfg); - REG_WR_INT(gio, regi_gio, rw_intr_pins, pins); - REG_WR_INT(gio, regi_gio, rw_intr_mask, mask); - - spin_unlock_irqrestore(&gpio_lock, flags); -} - -static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait) -{ - unsigned int mask = 0; - struct gpio_private *priv = file->private_data; - unsigned long data; - unsigned long tmp; - - if (priv->minor >= GPIO_MINOR_PWM0 && - priv->minor <= GPIO_MINOR_LAST_PWM) - return 0; - - poll_wait(file, &priv->alarm_wq, wait); - if (priv->minor <= GPIO_MINOR_D) { - data = readl(data_in[priv->minor]); - REG_WR_INT(gio, regi_gio, rw_ack_intr, wanted_interrupts); - tmp = REG_RD_INT(gio, regi_gio, rw_intr_mask); - tmp &= I2C_INTERRUPT_BITS; - tmp |= wanted_interrupts; - REG_WR_INT(gio, regi_gio, rw_intr_mask, tmp); - } else - return 0; - - if ((data & priv->highalarm) || (~data & priv->lowalarm)) - mask = POLLIN|POLLRDNORM; - - DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask)); - return mask; -} - -static irqreturn_t gpio_interrupt(int irq, void *dev_id) -{ - reg_gio_rw_intr_mask intr_mask; - reg_gio_r_masked_intr masked_intr; - reg_gio_rw_ack_intr ack_intr; - unsigned long flags; - unsigned long tmp; - unsigned long tmp2; -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - unsigned char enable_gpiov_ack = 0; -#endif - - /* Find what PA interrupts are active */ - masked_intr = REG_RD(gio, regi_gio, r_masked_intr); - tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr); - - /* Find those that we have enabled */ - spin_lock_irqsave(&gpio_lock, flags); - tmp &= wanted_interrupts; - spin_unlock_irqrestore(&gpio_lock, flags); - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - /* Something changed on virtual GPIO. Interrupt is acked by - * reading the device. - */ - if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) { - i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read, - sizeof(cached_virtual_gpio_read)); - enable_gpiov_ack = 1; - } -#endif - - /* Ack them */ - ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp); - REG_WR(gio, regi_gio, rw_ack_intr, ack_intr); - - /* Disable those interrupts.. */ - intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); - tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask); - tmp2 &= ~tmp; -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - /* Do not disable interrupt on virtual GPIO. Changes on virtual - * pins are only noticed by an interrupt. - */ - if (enable_gpiov_ack) - tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -#endif - intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2); - REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); - - return IRQ_RETVAL(tmp); -} - -static void gpio_write_bit(unsigned long *port, unsigned char data, int bit, - unsigned char clk_mask, unsigned char data_mask) -{ - unsigned long shadow = readl(port) & ~clk_mask; - writel(shadow, port); - if (data & 1 << bit) - shadow |= data_mask; - else - shadow &= ~data_mask; - writel(shadow, port); - /* For FPGA: min 5.0ns (DCC) before CCLK high */ - shadow |= clk_mask; - writel(shadow, port); -} - -static void gpio_write_byte(struct gpio_private *priv, unsigned long *port, - unsigned char data) -{ - int i; - - if (priv->write_msb) - for (i = 7; i >= 0; i--) - gpio_write_bit(port, data, i, priv->clk_mask, - priv->data_mask); - else - for (i = 0; i <= 7; i++) - gpio_write_bit(port, data, i, priv->clk_mask, - priv->data_mask); -} - - -static ssize_t gpio_write(struct file *file, const char __user *buf, - size_t count, loff_t *off) -{ - struct gpio_private *priv = file->private_data; - unsigned long flags; - ssize_t retval = count; - /* Only bits 0-7 may be used for write operations but allow all - devices except leds... */ -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - if (priv->minor == GPIO_MINOR_V) - return -EFAULT; -#endif - if (priv->minor == GPIO_MINOR_LEDS) - return -EFAULT; - - if (priv->minor >= GPIO_MINOR_PWM0 && - priv->minor <= GPIO_MINOR_LAST_PWM) - return -EFAULT; - - if (!access_ok(VERIFY_READ, buf, count)) - return -EFAULT; - - /* It must have been configured using the IO_CFG_WRITE_MODE */ - /* Perhaps a better error code? */ - if (priv->clk_mask == 0 || priv->data_mask == 0) - return -EPERM; - - D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X " - "msb: %i\n", - count, priv->data_mask, priv->clk_mask, priv->write_msb)); - - spin_lock_irqsave(&gpio_lock, flags); - - while (count--) - gpio_write_byte(priv, data_out[priv->minor], *buf++); - - spin_unlock_irqrestore(&gpio_lock, flags); - return retval; -} - -static int gpio_open(struct inode *inode, struct file *filp) -{ - struct gpio_private *priv; - int p = iminor(inode); - - if (p > GPIO_MINOR_LAST_PWM || - (p > GPIO_MINOR_LAST && p < GPIO_MINOR_PWM0)) - return -EINVAL; - - priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL); - - if (!priv) - return -ENOMEM; - - mutex_lock(&gpio_mutex); - memset(priv, 0, sizeof(*priv)); - - priv->minor = p; - filp->private_data = priv; - - /* initialize the io/alarm struct, not for PWM ports though */ - if (p <= GPIO_MINOR_LAST) { - - priv->clk_mask = 0; - priv->data_mask = 0; - priv->highalarm = 0; - priv->lowalarm = 0; - - init_waitqueue_head(&priv->alarm_wq); - - /* link it into our alarmlist */ - spin_lock_irq(&gpio_lock); - priv->next = alarmlist; - alarmlist = priv; - spin_unlock_irq(&gpio_lock); - } - - mutex_unlock(&gpio_mutex); - return 0; -} - -static int gpio_release(struct inode *inode, struct file *filp) -{ - struct gpio_private *p; - struct gpio_private *todel; - /* local copies while updating them: */ - unsigned long a_high, a_low; - - /* prepare to free private structure */ - todel = filp->private_data; - - /* unlink from alarmlist - only for non-PWM ports though */ - if (todel->minor <= GPIO_MINOR_LAST) { - spin_lock_irq(&gpio_lock); - p = alarmlist; - - if (p == todel) - alarmlist = todel->next; - else { - while (p->next != todel) - p = p->next; - p->next = todel->next; - } - - /* Check if there are still any alarms set */ - p = alarmlist; - a_high = 0; - a_low = 0; - while (p) { - if (p->minor == GPIO_MINOR_A) { -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -#endif - a_high |= p->highalarm; - a_low |= p->lowalarm; - } - - p = p->next; - } - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - /* Variable 'a_low' needs to be set here again - * to ensure that interrupt for virtual GPIO is handled. - */ - a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -#endif - - spin_unlock_irq(&gpio_lock); - } - kfree(todel); - - return 0; -} - -/* Main device API. ioctl's to read/set/clear bits, as well as to - * set alarms to wait for using a subsequent select(). - */ - -inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg) -{ - /* Set direction 0=unchanged 1=input, - * return mask with 1=input - */ - unsigned long flags; - unsigned long dir_shadow; - - spin_lock_irqsave(&gpio_lock, flags); - - dir_shadow = readl(dir_oe[priv->minor]) & - ~(arg & changeable_dir[priv->minor]); - writel(dir_shadow, dir_oe[priv->minor]); - - spin_unlock_irqrestore(&gpio_lock, flags); - - if (priv->minor == GPIO_MINOR_C) - dir_shadow ^= 0xFFFF; /* Only 16 bits */ -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - else if (priv->minor == GPIO_MINOR_V) - dir_shadow ^= 0xFFFF; /* Only 16 bits */ -#endif - else - dir_shadow ^= 0xFFFFFFFF; /* PA, PB and PD 32 bits */ - - return dir_shadow; - -} /* setget_input */ - -static inline unsigned long setget_output(struct gpio_private *priv, - unsigned long arg) -{ - unsigned long flags; - unsigned long dir_shadow; - - spin_lock_irqsave(&gpio_lock, flags); - - dir_shadow = readl(dir_oe[priv->minor]) | - (arg & changeable_dir[priv->minor]); - writel(dir_shadow, dir_oe[priv->minor]); - - spin_unlock_irqrestore(&gpio_lock, flags); - return dir_shadow; -} /* setget_output */ - -static long gpio_ioctl_unlocked(struct file *file, - unsigned int cmd, unsigned long arg) -{ - unsigned long flags; - unsigned long val; - unsigned long shadow; - struct gpio_private *priv = file->private_data; - - if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) - return -ENOTTY; - - /* Check for special ioctl handlers first */ - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - if (priv->minor == GPIO_MINOR_V) - return virtual_gpio_ioctl(file, cmd, arg); -#endif - - if (priv->minor == GPIO_MINOR_LEDS) - return gpio_leds_ioctl(cmd, arg); - - if (priv->minor >= GPIO_MINOR_PWM0 && - priv->minor <= GPIO_MINOR_LAST_PWM) - return gpio_pwm_ioctl(priv, cmd, arg); - - switch (_IOC_NR(cmd)) { - case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ - /* Read the port. */ - return readl(data_in[priv->minor]); - case IO_SETBITS: - spin_lock_irqsave(&gpio_lock, flags); - /* Set changeable bits with a 1 in arg. */ - shadow = readl(data_out[priv->minor]) | - (arg & changeable_bits[priv->minor]); - writel(shadow, data_out[priv->minor]); - spin_unlock_irqrestore(&gpio_lock, flags); - break; - case IO_CLRBITS: - spin_lock_irqsave(&gpio_lock, flags); - /* Clear changeable bits with a 1 in arg. */ - shadow = readl(data_out[priv->minor]) & - ~(arg & changeable_bits[priv->minor]); - writel(shadow, data_out[priv->minor]); - spin_unlock_irqrestore(&gpio_lock, flags); - break; - case IO_HIGHALARM: - /* Set alarm when bits with 1 in arg go high. */ - priv->highalarm |= arg; - gpio_set_alarm(priv); - break; - case IO_LOWALARM: - /* Set alarm when bits with 1 in arg go low. */ - priv->lowalarm |= arg; - gpio_set_alarm(priv); - break; - case IO_CLRALARM: - /* Clear alarm for bits with 1 in arg. */ - priv->highalarm &= ~arg; - priv->lowalarm &= ~arg; - gpio_set_alarm(priv); - break; - case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ - /* Read direction 0=input 1=output */ - return readl(dir_oe[priv->minor]); - - case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ - /* Set direction 0=unchanged 1=input, - * return mask with 1=input - */ - return setget_input(priv, arg); - - case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ - /* Set direction 0=unchanged 1=output, - * return mask with 1=output - */ - return setget_output(priv, arg); - - case IO_CFG_WRITE_MODE: - { - int res = -EPERM; - unsigned long dir_shadow, clk_mask, data_mask, write_msb; - - clk_mask = arg & 0xFF; - data_mask = (arg >> 8) & 0xFF; - write_msb = (arg >> 16) & 0x01; - - /* Check if we're allowed to change the bits and - * the direction is correct - */ - spin_lock_irqsave(&gpio_lock, flags); - dir_shadow = readl(dir_oe[priv->minor]); - if ((clk_mask & changeable_bits[priv->minor]) && - (data_mask & changeable_bits[priv->minor]) && - (clk_mask & dir_shadow) && - (data_mask & dir_shadow)) { - priv->clk_mask = clk_mask; - priv->data_mask = data_mask; - priv->write_msb = write_msb; - res = 0; - } - spin_unlock_irqrestore(&gpio_lock, flags); - - return res; - } - case IO_READ_INBITS: - /* *arg is result of reading the input pins */ - val = readl(data_in[priv->minor]); - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - return 0; - case IO_READ_OUTBITS: - /* *arg is result of reading the output shadow */ - val = *data_out[priv->minor]; - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - break; - case IO_SETGET_INPUT: - /* bits set in *arg is set to input, - * *arg updated with current input pins. - */ - if (copy_from_user(&val, (void __user *)arg, sizeof(val))) - return -EFAULT; - val = setget_input(priv, val); - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - break; - case IO_SETGET_OUTPUT: - /* bits set in *arg is set to output, - * *arg updated with current output pins. - */ - if (copy_from_user(&val, (void __user *)arg, sizeof(val))) - return -EFAULT; - val = setget_output(priv, val); - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - break; - default: - return -EINVAL; - } /* switch */ - - return 0; -} - -static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - long ret; - - mutex_lock(&gpio_mutex); - ret = gpio_ioctl_unlocked(file, cmd, arg); - mutex_unlock(&gpio_mutex); - - return ret; -} - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - unsigned long flags; - unsigned short val; - unsigned short shadow; - struct gpio_private *priv = file->private_data; - - switch (_IOC_NR(cmd)) { - case IO_SETBITS: - spin_lock_irqsave(&gpio_lock, flags); - /* Set changeable bits with a 1 in arg. */ - i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - shadow |= ~readl(dir_oe[priv->minor]) | - (arg & changeable_bits[priv->minor]); - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - spin_unlock_irqrestore(&gpio_lock, flags); - break; - case IO_CLRBITS: - spin_lock_irqsave(&gpio_lock, flags); - /* Clear changeable bits with a 1 in arg. */ - i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - shadow |= ~readl(dir_oe[priv->minor]) & - ~(arg & changeable_bits[priv->minor]); - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - spin_unlock_irqrestore(&gpio_lock, flags); - break; - case IO_HIGHALARM: - /* Set alarm when bits with 1 in arg go high. */ - priv->highalarm |= arg; - break; - case IO_LOWALARM: - /* Set alarm when bits with 1 in arg go low. */ - priv->lowalarm |= arg; - break; - case IO_CLRALARM: - /* Clear alarm for bits with 1 in arg. */ - priv->highalarm &= ~arg; - priv->lowalarm &= ~arg; - break; - case IO_CFG_WRITE_MODE: - { - unsigned long dir_shadow; - dir_shadow = readl(dir_oe[priv->minor]); - - priv->clk_mask = arg & 0xFF; - priv->data_mask = (arg >> 8) & 0xFF; - priv->write_msb = (arg >> 16) & 0x01; - /* Check if we're allowed to change the bits and - * the direction is correct - */ - if (!((priv->clk_mask & changeable_bits[priv->minor]) && - (priv->data_mask & changeable_bits[priv->minor]) && - (priv->clk_mask & dir_shadow) && - (priv->data_mask & dir_shadow))) { - priv->clk_mask = 0; - priv->data_mask = 0; - return -EPERM; - } - break; - } - case IO_READ_INBITS: - /* *arg is result of reading the input pins */ - val = cached_virtual_gpio_read & ~readl(dir_oe[priv->minor]); - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - return 0; - - case IO_READ_OUTBITS: - /* *arg is result of reading the output shadow */ - i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val)); - val &= readl(dir_oe[priv->minor]); - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - break; - case IO_SETGET_INPUT: - { - /* bits set in *arg is set to input, - * *arg updated with current input pins. - */ - unsigned short input_mask = ~readl(dir_oe[priv->minor]); - if (copy_from_user(&val, (void __user *)arg, sizeof(val))) - return -EFAULT; - val = setget_input(priv, val); - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - if ((input_mask & val) != input_mask) { - /* Input pins changed. All ports desired as input - * should be set to logic 1. - */ - unsigned short change = input_mask ^ val; - i2c_read(VIRT_I2C_ADDR, (void *)&shadow, - sizeof(shadow)); - shadow &= ~change; - shadow |= val; - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, - sizeof(shadow)); - } - break; - } - case IO_SETGET_OUTPUT: - /* bits set in *arg is set to output, - * *arg updated with current output pins. - */ - if (copy_from_user(&val, (void __user *)arg, sizeof(val))) - return -EFAULT; - val = setget_output(priv, val); - if (copy_to_user((void __user *)arg, &val, sizeof(val))) - return -EFAULT; - break; - default: - return -EINVAL; - } /* switch */ - return 0; -} -#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */ - -static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg) -{ - unsigned char green; - unsigned char red; - - switch (_IOC_NR(cmd)) { - case IO_LEDACTIVE_SET: - green = ((unsigned char) arg) & 1; - red = (((unsigned char) arg) >> 1) & 1; - CRIS_LED_ACTIVE_SET_G(green); - CRIS_LED_ACTIVE_SET_R(red); - break; - - default: - return -EINVAL; - } /* switch */ - - return 0; -} - -static int gpio_pwm_set_mode(unsigned long arg, int pwm_port) -{ - int pinmux_pwm = pinmux_pwm0 + pwm_port; - int mode; - reg_gio_rw_pwm0_ctrl rw_pwm_ctrl = { - .ccd_val = 0, - .ccd_override = regk_gio_no, - .mode = regk_gio_no - }; - int allocstatus; - - if (get_user(mode, &((struct io_pwm_set_mode *) arg)->mode)) - return -EFAULT; - rw_pwm_ctrl.mode = mode; - if (mode != PWM_OFF) - allocstatus = crisv32_pinmux_alloc_fixed(pinmux_pwm); - else - allocstatus = crisv32_pinmux_dealloc_fixed(pinmux_pwm); - if (allocstatus) - return allocstatus; - REG_WRITE(reg_gio_rw_pwm0_ctrl, REG_ADDR(gio, regi_gio, rw_pwm0_ctrl) + - 12 * pwm_port, rw_pwm_ctrl); - return 0; -} - -static int gpio_pwm_set_period(unsigned long arg, int pwm_port) -{ - struct io_pwm_set_period periods; - reg_gio_rw_pwm0_var rw_pwm_widths; - - if (copy_from_user(&periods, (void __user *)arg, sizeof(periods))) - return -EFAULT; - if (periods.lo > 8191 || periods.hi > 8191) - return -EINVAL; - rw_pwm_widths.lo = periods.lo; - rw_pwm_widths.hi = periods.hi; - REG_WRITE(reg_gio_rw_pwm0_var, REG_ADDR(gio, regi_gio, rw_pwm0_var) + - 12 * pwm_port, rw_pwm_widths); - return 0; -} - -static int gpio_pwm_set_duty(unsigned long arg, int pwm_port) -{ - unsigned int duty; - reg_gio_rw_pwm0_data rw_pwm_duty; - - if (get_user(duty, &((struct io_pwm_set_duty *) arg)->duty)) - return -EFAULT; - if (duty > 255) - return -EINVAL; - rw_pwm_duty.data = duty; - REG_WRITE(reg_gio_rw_pwm0_data, REG_ADDR(gio, regi_gio, rw_pwm0_data) + - 12 * pwm_port, rw_pwm_duty); - return 0; -} - -static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd, - unsigned long arg) -{ - int pwm_port = priv->minor - GPIO_MINOR_PWM0; - - switch (_IOC_NR(cmd)) { - case IO_PWM_SET_MODE: - return gpio_pwm_set_mode(arg, pwm_port); - case IO_PWM_SET_PERIOD: - return gpio_pwm_set_period(arg, pwm_port); - case IO_PWM_SET_DUTY: - return gpio_pwm_set_duty(arg, pwm_port); - default: - return -EINVAL; - } - return 0; -} - -static const struct file_operations gpio_fops = { - .owner = THIS_MODULE, - .poll = gpio_poll, - .unlocked_ioctl = gpio_ioctl, - .write = gpio_write, - .open = gpio_open, - .release = gpio_release, - .llseek = noop_llseek, -}; - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static void __init virtual_gpio_init(void) -{ - reg_gio_rw_intr_cfg intr_cfg; - reg_gio_rw_intr_mask intr_mask; - unsigned short shadow; - - shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */ - shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT; - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - - /* Set interrupt mask and on what state the interrupt shall trigger. - * For virtual gpio the interrupt shall trigger on logic '0'. - */ - intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg); - intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); - - switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) { - case 0: - intr_cfg.pa0 = regk_gio_lo; - intr_mask.pa0 = regk_gio_yes; - break; - case 1: - intr_cfg.pa1 = regk_gio_lo; - intr_mask.pa1 = regk_gio_yes; - break; - case 2: - intr_cfg.pa2 = regk_gio_lo; - intr_mask.pa2 = regk_gio_yes; - break; - case 3: - intr_cfg.pa3 = regk_gio_lo; - intr_mask.pa3 = regk_gio_yes; - break; - case 4: - intr_cfg.pa4 = regk_gio_lo; - intr_mask.pa4 = regk_gio_yes; - break; - case 5: - intr_cfg.pa5 = regk_gio_lo; - intr_mask.pa5 = regk_gio_yes; - break; - case 6: - intr_cfg.pa6 = regk_gio_lo; - intr_mask.pa6 = regk_gio_yes; - break; - case 7: - intr_cfg.pa7 = regk_gio_lo; - intr_mask.pa7 = regk_gio_yes; - break; - } - - REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg); - REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); -} -#endif - -/* main driver initialization routine, called from mem.c */ - -static int __init gpio_init(void) -{ - int res, res2; - - printk(KERN_INFO "ETRAX FS GPIO driver v2.7, (c) 2003-2008 " - "Axis Communications AB\n"); - - /* do the formalities */ - - res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops); - if (res < 0) { - printk(KERN_ERR "gpio: couldn't get a major number.\n"); - return res; - } - - /* Clear all leds */ - CRIS_LED_NETWORK_GRP0_SET(0); - CRIS_LED_NETWORK_GRP1_SET(0); - CRIS_LED_ACTIVE_SET(0); - CRIS_LED_DISK_READ(0); - CRIS_LED_DISK_WRITE(0); - - res2 = request_irq(GIO_INTR_VECT, gpio_interrupt, - IRQF_SHARED, "gpio", &alarmlist); - if (res2) { - printk(KERN_ERR "err: irq for gpio\n"); - return res2; - } - - /* No IRQs by default. */ - REG_WR_INT(gio, regi_gio, rw_intr_pins, 0); - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - virtual_gpio_init(); -#endif - - return res; -} - -/* this makes sure that gpio_init is called during kernel boot */ - -module_init(gpio_init); diff --git a/arch/cris/arch-v32/drivers/mach-fs/Makefile b/arch/cris/arch-v32/drivers/mach-fs/Makefile index 5c6d2a2a080e..59028d0b981c 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/Makefile +++ b/arch/cris/arch-v32/drivers/mach-fs/Makefile @@ -3,4 +3,3 @@ # obj-$(CONFIG_ETRAX_NANDFLASH) += nandflash.o -obj-$(CONFIG_ETRAX_GPIO) += gpio.o diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c deleted file mode 100644 index 72968fbf814b..000000000000 --- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c +++ /dev/null @@ -1,978 +0,0 @@ -/* - * ETRAX CRISv32 general port I/O device - * - * Copyright (c) 1999-2006 Axis Communications AB - * - * Authors: Bjorn Wesen (initial version) - * Ola Knutsson (LED handling) - * Johan Adolfsson (read/set directions, write, port G, - * port to ETRAX FS. - * - */ - -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/fs.h> -#include <linux/string.h> -#include <linux/poll.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/mutex.h> - -#include <asm/etraxgpio.h> -#include <hwregs/reg_map.h> -#include <hwregs/reg_rdwr.h> -#include <hwregs/gio_defs.h> -#include <hwregs/intr_vect_defs.h> -#include <asm/io.h> -#include <asm/irq.h> - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -#include "../i2c.h" - -#define VIRT_I2C_ADDR 0x40 -#endif - -/* The following gio ports on ETRAX FS is available: - * pa 8 bits, supports interrupts off, hi, low, set, posedge, negedge anyedge - * pb 18 bits - * pc 18 bits - * pd 18 bits - * pe 18 bits - * each port has a rw_px_dout, r_px_din and rw_px_oe register. - */ - -#define GPIO_MAJOR 120 /* experimental MAJOR number */ - -#define D(x) - -#if 0 -static int dp_cnt; -#define DP(x) \ - do { \ - dp_cnt++; \ - if (dp_cnt % 1000 == 0) \ - x; \ - } while (0) -#else -#define DP(x) -#endif - -static DEFINE_MUTEX(gpio_mutex); -static char gpio_name[] = "etrax gpio"; - -#if 0 -static wait_queue_head_t *gpio_wq; -#endif - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, - unsigned long arg); -#endif -static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg); -static ssize_t gpio_write(struct file *file, const char *buf, size_t count, - loff_t *off); -static int gpio_open(struct inode *inode, struct file *filp); -static int gpio_release(struct inode *inode, struct file *filp); -static unsigned int gpio_poll(struct file *filp, - struct poll_table_struct *wait); - -/* private data per open() of this driver */ - -struct gpio_private { - struct gpio_private *next; - /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */ - unsigned char clk_mask; - unsigned char data_mask; - unsigned char write_msb; - unsigned char pad1; - /* These fields are generic */ - unsigned long highalarm, lowalarm; - wait_queue_head_t alarm_wq; - int minor; -}; - -/* linked list of alarms to check for */ - -static struct gpio_private *alarmlist; - -static int gpio_some_alarms; /* Set if someone uses alarm */ -static unsigned long gpio_pa_high_alarms; -static unsigned long gpio_pa_low_alarms; - -static DEFINE_SPINLOCK(alarm_lock); - -#define NUM_PORTS (GPIO_MINOR_LAST+1) -#define GIO_REG_RD_ADDR(reg) \ - (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg) -#define GIO_REG_WR_ADDR(reg) \ - (volatile unsigned long *)(regi_gio + REG_RD_ADDR_gio_##reg) -unsigned long led_dummy; -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static unsigned long virtual_dummy; -static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE; -static unsigned short cached_virtual_gpio_read; -#endif - -static volatile unsigned long *data_out[NUM_PORTS] = { - GIO_REG_WR_ADDR(rw_pa_dout), - GIO_REG_WR_ADDR(rw_pb_dout), - &led_dummy, - GIO_REG_WR_ADDR(rw_pc_dout), - GIO_REG_WR_ADDR(rw_pd_dout), - GIO_REG_WR_ADDR(rw_pe_dout), -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - &virtual_dummy, -#endif -}; - -static volatile unsigned long *data_in[NUM_PORTS] = { - GIO_REG_RD_ADDR(r_pa_din), - GIO_REG_RD_ADDR(r_pb_din), - &led_dummy, - GIO_REG_RD_ADDR(r_pc_din), - GIO_REG_RD_ADDR(r_pd_din), - GIO_REG_RD_ADDR(r_pe_din), -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - &virtual_dummy, -#endif -}; - -static unsigned long changeable_dir[NUM_PORTS] = { - CONFIG_ETRAX_PA_CHANGEABLE_DIR, - CONFIG_ETRAX_PB_CHANGEABLE_DIR, - 0, - CONFIG_ETRAX_PC_CHANGEABLE_DIR, - CONFIG_ETRAX_PD_CHANGEABLE_DIR, - CONFIG_ETRAX_PE_CHANGEABLE_DIR, -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - CONFIG_ETRAX_PV_CHANGEABLE_DIR, -#endif -}; - -static unsigned long changeable_bits[NUM_PORTS] = { - CONFIG_ETRAX_PA_CHANGEABLE_BITS, - CONFIG_ETRAX_PB_CHANGEABLE_BITS, - 0, - CONFIG_ETRAX_PC_CHANGEABLE_BITS, - CONFIG_ETRAX_PD_CHANGEABLE_BITS, - CONFIG_ETRAX_PE_CHANGEABLE_BITS, -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - CONFIG_ETRAX_PV_CHANGEABLE_BITS, -#endif -}; - -static volatile unsigned long *dir_oe[NUM_PORTS] = { - GIO_REG_WR_ADDR(rw_pa_oe), - GIO_REG_WR_ADDR(rw_pb_oe), - &led_dummy, - GIO_REG_WR_ADDR(rw_pc_oe), - GIO_REG_WR_ADDR(rw_pd_oe), - GIO_REG_WR_ADDR(rw_pe_oe), -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - &virtual_rw_pv_oe, -#endif -}; - - - -static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait) -{ - unsigned int mask = 0; - struct gpio_private *priv = file->private_data; - unsigned long data; - poll_wait(file, &priv->alarm_wq, wait); - if (priv->minor == GPIO_MINOR_A) { - reg_gio_rw_intr_cfg intr_cfg; - unsigned long tmp; - unsigned long flags; - - local_irq_save(flags); - data = REG_TYPE_CONV(unsigned long, reg_gio_r_pa_din, - REG_RD(gio, regi_gio, r_pa_din)); - /* PA has support for interrupt - * lets activate high for those low and with highalarm set - */ - intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg); - - tmp = ~data & priv->highalarm & 0xFF; - if (tmp & (1 << 0)) - intr_cfg.pa0 = regk_gio_hi; - if (tmp & (1 << 1)) - intr_cfg.pa1 = regk_gio_hi; - if (tmp & (1 << 2)) - intr_cfg.pa2 = regk_gio_hi; - if (tmp & (1 << 3)) - intr_cfg.pa3 = regk_gio_hi; - if (tmp & (1 << 4)) - intr_cfg.pa4 = regk_gio_hi; - if (tmp & (1 << 5)) - intr_cfg.pa5 = regk_gio_hi; - if (tmp & (1 << 6)) - intr_cfg.pa6 = regk_gio_hi; - if (tmp & (1 << 7)) - intr_cfg.pa7 = regk_gio_hi; - /* - * lets activate low for those high and with lowalarm set - */ - tmp = data & priv->lowalarm & 0xFF; - if (tmp & (1 << 0)) - intr_cfg.pa0 = regk_gio_lo; - if (tmp & (1 << 1)) - intr_cfg.pa1 = regk_gio_lo; - if (tmp & (1 << 2)) - intr_cfg.pa2 = regk_gio_lo; - if (tmp & (1 << 3)) - intr_cfg.pa3 = regk_gio_lo; - if (tmp & (1 << 4)) - intr_cfg.pa4 = regk_gio_lo; - if (tmp & (1 << 5)) - intr_cfg.pa5 = regk_gio_lo; - if (tmp & (1 << 6)) - intr_cfg.pa6 = regk_gio_lo; - if (tmp & (1 << 7)) - intr_cfg.pa7 = regk_gio_lo; - - REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg); - local_irq_restore(flags); - } else if (priv->minor <= GPIO_MINOR_E) - data = *data_in[priv->minor]; - else - return 0; - - if ((data & priv->highalarm) || (~data & priv->lowalarm)) - mask = POLLIN|POLLRDNORM; - - DP(printk(KERN_DEBUG "gpio_poll ready: mask 0x%08X\n", mask)); - return mask; -} - -int etrax_gpio_wake_up_check(void) -{ - struct gpio_private *priv; - unsigned long data = 0; - unsigned long flags; - int ret = 0; - spin_lock_irqsave(&alarm_lock, flags); - priv = alarmlist; - while (priv) { -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - if (priv->minor == GPIO_MINOR_V) - data = (unsigned long)cached_virtual_gpio_read; - else { - data = *data_in[priv->minor]; - if (priv->minor == GPIO_MINOR_A) - priv->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); - } -#else - data = *data_in[priv->minor]; -#endif - if ((data & priv->highalarm) || - (~data & priv->lowalarm)) { - DP(printk(KERN_DEBUG - "etrax_gpio_wake_up_check %i\n", priv->minor)); - wake_up_interruptible(&priv->alarm_wq); - ret = 1; - } - priv = priv->next; - } - spin_unlock_irqrestore(&alarm_lock, flags); - return ret; -} - -static irqreturn_t -gpio_poll_timer_interrupt(int irq, void *dev_id) -{ - if (gpio_some_alarms) - return IRQ_RETVAL(etrax_gpio_wake_up_check()); - return IRQ_NONE; -} - -static irqreturn_t -gpio_pa_interrupt(int irq, void *dev_id) -{ - reg_gio_rw_intr_mask intr_mask; - reg_gio_r_masked_intr masked_intr; - reg_gio_rw_ack_intr ack_intr; - unsigned long tmp; - unsigned long tmp2; -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - unsigned char enable_gpiov_ack = 0; -#endif - - /* Find what PA interrupts are active */ - masked_intr = REG_RD(gio, regi_gio, r_masked_intr); - tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr); - - /* Find those that we have enabled */ - spin_lock(&alarm_lock); - tmp &= (gpio_pa_high_alarms | gpio_pa_low_alarms); - spin_unlock(&alarm_lock); - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - /* Something changed on virtual GPIO. Interrupt is acked by - * reading the device. - */ - if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) { - i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read, - sizeof(cached_virtual_gpio_read)); - enable_gpiov_ack = 1; - } -#endif - - /* Ack them */ - ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp); - REG_WR(gio, regi_gio, rw_ack_intr, ack_intr); - - /* Disable those interrupts.. */ - intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); - tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask); - tmp2 &= ~tmp; -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - /* Do not disable interrupt on virtual GPIO. Changes on virtual - * pins are only noticed by an interrupt. - */ - if (enable_gpiov_ack) - tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -#endif - intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2); - REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); - - if (gpio_some_alarms) - return IRQ_RETVAL(etrax_gpio_wake_up_check()); - return IRQ_NONE; -} - - -static ssize_t gpio_write(struct file *file, const char *buf, size_t count, - loff_t *off) -{ - struct gpio_private *priv = file->private_data; - unsigned char data, clk_mask, data_mask, write_msb; - unsigned long flags; - unsigned long shadow; - volatile unsigned long *port; - ssize_t retval = count; - /* Only bits 0-7 may be used for write operations but allow all - devices except leds... */ -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - if (priv->minor == GPIO_MINOR_V) - return -EFAULT; -#endif - if (priv->minor == GPIO_MINOR_LEDS) - return -EFAULT; - - if (!access_ok(VERIFY_READ, buf, count)) - return -EFAULT; - clk_mask = priv->clk_mask; - data_mask = priv->data_mask; - /* It must have been configured using the IO_CFG_WRITE_MODE */ - /* Perhaps a better error code? */ - if (clk_mask == 0 || data_mask == 0) - return -EPERM; - write_msb = priv->write_msb; - D(printk(KERN_DEBUG "gpio_write: %lu to data 0x%02X clk 0x%02X " - "msb: %i\n", count, data_mask, clk_mask, write_msb)); - port = data_out[priv->minor]; - - while (count--) { - int i; - data = *buf++; - if (priv->write_msb) { - for (i = 7; i >= 0; i--) { - local_irq_save(flags); - shadow = *port; - *port = shadow &= ~clk_mask; - if (data & 1<<i) - *port = shadow |= data_mask; - else - *port = shadow &= ~data_mask; - /* For FPGA: min 5.0ns (DCC) before CCLK high */ - *port = shadow |= clk_mask; - local_irq_restore(flags); - } - } else { - for (i = 0; i <= 7; i++) { - local_irq_save(flags); - shadow = *port; - *port = shadow &= ~clk_mask; - if (data & 1<<i) - *port = shadow |= data_mask; - else - *port = shadow &= ~data_mask; - /* For FPGA: min 5.0ns (DCC) before CCLK high */ - *port = shadow |= clk_mask; - local_irq_restore(flags); - } - } - } - return retval; -} - - - -static int -gpio_open(struct inode *inode, struct file *filp) -{ - struct gpio_private *priv; - int p = iminor(inode); - - if (p > GPIO_MINOR_LAST) - return -EINVAL; - - priv = kzalloc(sizeof(struct gpio_private), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - mutex_lock(&gpio_mutex); - - priv->minor = p; - - /* initialize the io/alarm struct */ - - priv->clk_mask = 0; - priv->data_mask = 0; - priv->highalarm = 0; - priv->lowalarm = 0; - init_waitqueue_head(&priv->alarm_wq); - - filp->private_data = (void *)priv; - - /* link it into our alarmlist */ - spin_lock_irq(&alarm_lock); - priv->next = alarmlist; - alarmlist = priv; - spin_unlock_irq(&alarm_lock); - - mutex_unlock(&gpio_mutex); - return 0; -} - -static int -gpio_release(struct inode *inode, struct file *filp) -{ - struct gpio_private *p; - struct gpio_private *todel; - /* local copies while updating them: */ - unsigned long a_high, a_low; - unsigned long some_alarms; - - /* unlink from alarmlist and free the private structure */ - - spin_lock_irq(&alarm_lock); - p = alarmlist; - todel = filp->private_data; - - if (p == todel) { - alarmlist = todel->next; - } else { - while (p->next != todel) - p = p->next; - p->next = todel->next; - } - - kfree(todel); - /* Check if there are still any alarms set */ - p = alarmlist; - some_alarms = 0; - a_high = 0; - a_low = 0; - while (p) { - if (p->minor == GPIO_MINOR_A) { -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -#endif - a_high |= p->highalarm; - a_low |= p->lowalarm; - } - - if (p->highalarm | p->lowalarm) - some_alarms = 1; - p = p->next; - } - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - /* Variables 'some_alarms' and 'a_low' needs to be set here again - * to ensure that interrupt for virtual GPIO is handled. - */ - some_alarms = 1; - a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); -#endif - - gpio_some_alarms = some_alarms; - gpio_pa_high_alarms = a_high; - gpio_pa_low_alarms = a_low; - spin_unlock_irq(&alarm_lock); - - return 0; -} - -/* Main device API. ioctl's to read/set/clear bits, as well as to - * set alarms to wait for using a subsequent select(). - */ - -inline unsigned long setget_input(struct gpio_private *priv, unsigned long arg) -{ - /* Set direction 0=unchanged 1=input, - * return mask with 1=input - */ - unsigned long flags; - unsigned long dir_shadow; - - local_irq_save(flags); - dir_shadow = *dir_oe[priv->minor]; - dir_shadow &= ~(arg & changeable_dir[priv->minor]); - *dir_oe[priv->minor] = dir_shadow; - local_irq_restore(flags); - - if (priv->minor == GPIO_MINOR_A) - dir_shadow ^= 0xFF; /* Only 8 bits */ -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - else if (priv->minor == GPIO_MINOR_V) - dir_shadow ^= 0xFFFF; /* Only 16 bits */ -#endif - else - dir_shadow ^= 0x3FFFF; /* Only 18 bits */ - return dir_shadow; - -} /* setget_input */ - -inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg) -{ - unsigned long flags; - unsigned long dir_shadow; - - local_irq_save(flags); - dir_shadow = *dir_oe[priv->minor]; - dir_shadow |= (arg & changeable_dir[priv->minor]); - *dir_oe[priv->minor] = dir_shadow; - local_irq_restore(flags); - return dir_shadow; -} /* setget_output */ - -static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg); - -static int -gpio_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg) -{ - unsigned long flags; - unsigned long val; - unsigned long shadow; - struct gpio_private *priv = file->private_data; - if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) - return -EINVAL; - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - if (priv->minor == GPIO_MINOR_V) - return virtual_gpio_ioctl(file, cmd, arg); -#endif - - switch (_IOC_NR(cmd)) { - case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ - /* Read the port. */ - return *data_in[priv->minor]; - break; - case IO_SETBITS: - local_irq_save(flags); - /* Set changeable bits with a 1 in arg. */ - shadow = *data_out[priv->minor]; - shadow |= (arg & changeable_bits[priv->minor]); - *data_out[priv->minor] = shadow; - local_irq_restore(flags); - break; - case IO_CLRBITS: - local_irq_save(flags); - /* Clear changeable bits with a 1 in arg. */ - shadow = *data_out[priv->minor]; - shadow &= ~(arg & changeable_bits[priv->minor]); - *data_out[priv->minor] = shadow; - local_irq_restore(flags); - break; - case IO_HIGHALARM: - /* Set alarm when bits with 1 in arg go high. */ - priv->highalarm |= arg; - spin_lock_irqsave(&alarm_lock, flags); - gpio_some_alarms = 1; - if (priv->minor == GPIO_MINOR_A) - gpio_pa_high_alarms |= arg; - spin_unlock_irqrestore(&alarm_lock, flags); - break; - case IO_LOWALARM: - /* Set alarm when bits with 1 in arg go low. */ - priv->lowalarm |= arg; - spin_lock_irqsave(&alarm_lock, flags); - gpio_some_alarms = 1; - if (priv->minor == GPIO_MINOR_A) - gpio_pa_low_alarms |= arg; - spin_unlock_irqrestore(&alarm_lock, flags); - break; - case IO_CLRALARM: - /* Clear alarm for bits with 1 in arg. */ - priv->highalarm &= ~arg; - priv->lowalarm &= ~arg; - spin_lock_irqsave(&alarm_lock, flags); - if (priv->minor == GPIO_MINOR_A) { - if (gpio_pa_high_alarms & arg || - gpio_pa_low_alarms & arg) - /* Must update the gpio_pa_*alarms masks */ - ; - } - spin_unlock_irqrestore(&alarm_lock, flags); - break; - case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ - /* Read direction 0=input 1=output */ - return *dir_oe[priv->minor]; - case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ - /* Set direction 0=unchanged 1=input, - * return mask with 1=input - */ - return setget_input(priv, arg); - break; - case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ - /* Set direction 0=unchanged 1=output, - * return mask with 1=output - */ - return setget_output(priv, arg); - - case IO_CFG_WRITE_MODE: - { - unsigned long dir_shadow; - dir_shadow = *dir_oe[priv->minor]; - - priv->clk_mask = arg & 0xFF; - priv->data_mask = (arg >> 8) & 0xFF; - priv->write_msb = (arg >> 16) & 0x01; - /* Check if we're allowed to change the bits and - * the direction is correct - */ - if (!((priv->clk_mask & changeable_bits[priv->minor]) && - (priv->data_mask & changeable_bits[priv->minor]) && - (priv->clk_mask & dir_shadow) && - (priv->data_mask & dir_shadow))) { - priv->clk_mask = 0; - priv->data_mask = 0; - return -EPERM; - } - break; - } - case IO_READ_INBITS: - /* *arg is result of reading the input pins */ - val = *data_in[priv->minor]; - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - return 0; - break; - case IO_READ_OUTBITS: - /* *arg is result of reading the output shadow */ - val = *data_out[priv->minor]; - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - break; - case IO_SETGET_INPUT: - /* bits set in *arg is set to input, - * *arg updated with current input pins. - */ - if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) - return -EFAULT; - val = setget_input(priv, val); - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - break; - case IO_SETGET_OUTPUT: - /* bits set in *arg is set to output, - * *arg updated with current output pins. - */ - if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) - return -EFAULT; - val = setget_output(priv, val); - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - break; - default: - if (priv->minor == GPIO_MINOR_LEDS) - return gpio_leds_ioctl(cmd, arg); - else - return -EINVAL; - } /* switch */ - - return 0; -} - -static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - long ret; - - mutex_lock(&gpio_mutex); - ret = gpio_ioctl_unlocked(file, cmd, arg); - mutex_unlock(&gpio_mutex); - - return ret; -} - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static int -virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - unsigned long flags; - unsigned short val; - unsigned short shadow; - struct gpio_private *priv = file->private_data; - - switch (_IOC_NR(cmd)) { - case IO_SETBITS: - local_irq_save(flags); - /* Set changeable bits with a 1 in arg. */ - i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - shadow |= ~*dir_oe[priv->minor]; - shadow |= (arg & changeable_bits[priv->minor]); - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - local_irq_restore(flags); - break; - case IO_CLRBITS: - local_irq_save(flags); - /* Clear changeable bits with a 1 in arg. */ - i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - shadow |= ~*dir_oe[priv->minor]; - shadow &= ~(arg & changeable_bits[priv->minor]); - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - local_irq_restore(flags); - break; - case IO_HIGHALARM: - /* Set alarm when bits with 1 in arg go high. */ - priv->highalarm |= arg; - spin_lock(&alarm_lock); - gpio_some_alarms = 1; - spin_unlock(&alarm_lock); - break; - case IO_LOWALARM: - /* Set alarm when bits with 1 in arg go low. */ - priv->lowalarm |= arg; - spin_lock(&alarm_lock); - gpio_some_alarms = 1; - spin_unlock(&alarm_lock); - break; - case IO_CLRALARM: - /* Clear alarm for bits with 1 in arg. */ - priv->highalarm &= ~arg; - priv->lowalarm &= ~arg; - spin_lock(&alarm_lock); - spin_unlock(&alarm_lock); - break; - case IO_CFG_WRITE_MODE: - { - unsigned long dir_shadow; - dir_shadow = *dir_oe[priv->minor]; - - priv->clk_mask = arg & 0xFF; - priv->data_mask = (arg >> 8) & 0xFF; - priv->write_msb = (arg >> 16) & 0x01; - /* Check if we're allowed to change the bits and - * the direction is correct - */ - if (!((priv->clk_mask & changeable_bits[priv->minor]) && - (priv->data_mask & changeable_bits[priv->minor]) && - (priv->clk_mask & dir_shadow) && - (priv->data_mask & dir_shadow))) { - priv->clk_mask = 0; - priv->data_mask = 0; - return -EPERM; - } - break; - } - case IO_READ_INBITS: - /* *arg is result of reading the input pins */ - val = cached_virtual_gpio_read; - val &= ~*dir_oe[priv->minor]; - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - return 0; - break; - case IO_READ_OUTBITS: - /* *arg is result of reading the output shadow */ - i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val)); - val &= *dir_oe[priv->minor]; - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - break; - case IO_SETGET_INPUT: - { - /* bits set in *arg is set to input, - * *arg updated with current input pins. - */ - unsigned short input_mask = ~*dir_oe[priv->minor]; - if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) - return -EFAULT; - val = setget_input(priv, val); - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - if ((input_mask & val) != input_mask) { - /* Input pins changed. All ports desired as input - * should be set to logic 1. - */ - unsigned short change = input_mask ^ val; - i2c_read(VIRT_I2C_ADDR, (void *)&shadow, - sizeof(shadow)); - shadow &= ~change; - shadow |= val; - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, - sizeof(shadow)); - } - break; - } - case IO_SETGET_OUTPUT: - /* bits set in *arg is set to output, - * *arg updated with current output pins. - */ - if (copy_from_user(&val, (unsigned long *)arg, sizeof(val))) - return -EFAULT; - val = setget_output(priv, val); - if (copy_to_user((unsigned long *)arg, &val, sizeof(val))) - return -EFAULT; - break; - default: - return -EINVAL; - } /* switch */ - return 0; -} -#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */ - -static int -gpio_leds_ioctl(unsigned int cmd, unsigned long arg) -{ - unsigned char green; - unsigned char red; - - switch (_IOC_NR(cmd)) { - case IO_LEDACTIVE_SET: - green = ((unsigned char) arg) & 1; - red = (((unsigned char) arg) >> 1) & 1; - CRIS_LED_ACTIVE_SET_G(green); - CRIS_LED_ACTIVE_SET_R(red); - break; - - default: - return -EINVAL; - } /* switch */ - - return 0; -} - -static const struct file_operations gpio_fops = { - .owner = THIS_MODULE, - .poll = gpio_poll, - .unlocked_ioctl = gpio_ioctl, - .write = gpio_write, - .open = gpio_open, - .release = gpio_release, - .llseek = noop_llseek, -}; - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -static void -virtual_gpio_init(void) -{ - reg_gio_rw_intr_cfg intr_cfg; - reg_gio_rw_intr_mask intr_mask; - unsigned short shadow; - - shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */ - shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT; - i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - - /* Set interrupt mask and on what state the interrupt shall trigger. - * For virtual gpio the interrupt shall trigger on logic '0'. - */ - intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg); - intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); - - switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) { - case 0: - intr_cfg.pa0 = regk_gio_lo; - intr_mask.pa0 = regk_gio_yes; - break; - case 1: - intr_cfg.pa1 = regk_gio_lo; - intr_mask.pa1 = regk_gio_yes; - break; - case 2: - intr_cfg.pa2 = regk_gio_lo; - intr_mask.pa2 = regk_gio_yes; - break; - case 3: - intr_cfg.pa3 = regk_gio_lo; - intr_mask.pa3 = regk_gio_yes; - break; - case 4: - intr_cfg.pa4 = regk_gio_lo; - intr_mask.pa4 = regk_gio_yes; - break; - case 5: - intr_cfg.pa5 = regk_gio_lo; - intr_mask.pa5 = regk_gio_yes; - break; - case 6: - intr_cfg.pa6 = regk_gio_lo; - intr_mask.pa6 = regk_gio_yes; - break; - case 7: - intr_cfg.pa7 = regk_gio_lo; - intr_mask.pa7 = regk_gio_yes; - break; - } - - REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg); - REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); - - gpio_pa_low_alarms |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); - gpio_some_alarms = 1; -} -#endif - -/* main driver initialization routine, called from mem.c */ - -static __init int -gpio_init(void) -{ - int res; - - /* do the formalities */ - - res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops); - if (res < 0) { - printk(KERN_ERR "gpio: couldn't get a major number.\n"); - return res; - } - - /* Clear all leds */ - CRIS_LED_NETWORK_GRP0_SET(0); - CRIS_LED_NETWORK_GRP1_SET(0); - CRIS_LED_ACTIVE_SET(0); - CRIS_LED_DISK_READ(0); - CRIS_LED_DISK_WRITE(0); - - printk(KERN_INFO "ETRAX FS GPIO driver v2.5, (c) 2003-2007 " - "Axis Communications AB\n"); - /* We call etrax_gpio_wake_up_check() from timer interrupt */ - if (request_irq(TIMER0_INTR_VECT, gpio_poll_timer_interrupt, - IRQF_SHARED, "gpio poll", &alarmlist)) - printk(KERN_ERR "timer0 irq for gpio\n"); - - if (request_irq(GIO_INTR_VECT, gpio_pa_interrupt, - IRQF_SHARED, "gpio PA", &alarmlist)) - printk(KERN_ERR "PA irq for gpio\n"); - -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - virtual_gpio_init(); -#endif - - return res; -} - -/* this makes sure that gpio_init is called during kernel boot */ - -module_init(gpio_init); diff --git a/arch/cris/arch-v32/kernel/crisksyms.c b/arch/cris/arch-v32/kernel/crisksyms.c index bde8d1a10cad..b0566350a840 100644 --- a/arch/cris/arch-v32/kernel/crisksyms.c +++ b/arch/cris/arch-v32/kernel/crisksyms.c @@ -3,7 +3,6 @@ #include <arch/dma.h> #include <arch/intmem.h> #include <mach/pinmux.h> -#include <arch/io.h> /* Functions for allocating DMA channels */ EXPORT_SYMBOL(crisv32_request_dma); @@ -20,8 +19,6 @@ EXPORT_SYMBOL(crisv32_pinmux_alloc); EXPORT_SYMBOL(crisv32_pinmux_alloc_fixed); EXPORT_SYMBOL(crisv32_pinmux_dealloc); EXPORT_SYMBOL(crisv32_pinmux_dealloc_fixed); -EXPORT_SYMBOL(crisv32_io_get_name); -EXPORT_SYMBOL(crisv32_io_get); /* Functions masking/unmasking interrupts */ EXPORT_SYMBOL(crisv32_mask_irq); diff --git a/arch/cris/arch-v32/kernel/debugport.c b/arch/cris/arch-v32/kernel/debugport.c index 02e33ebe51ec..d2f3f9c37102 100644 --- a/arch/cris/arch-v32/kernel/debugport.c +++ b/arch/cris/arch-v32/kernel/debugport.c @@ -77,8 +77,6 @@ static struct dbg_port *port = &ports[2]; #elif defined(CONFIG_ETRAX_DEBUG_PORT3) &ports[3]; -#elif defined(CONFIG_ETRAX_DEBUG_PORT4) - &ports[4]; #else NULL; #endif diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S index 74a66e0e3777..ea6366800df7 100644 --- a/arch/cris/arch-v32/kernel/head.S +++ b/arch/cris/arch-v32/kernel/head.S @@ -292,11 +292,7 @@ _no_romfs_in_flash: ;; For cramfs, partition starts with magic and length. ;; For jffs2, a jhead is prepended which contains with magic and length. ;; The jhead is not part of the jffs2 partition however. -#ifndef CONFIG_ETRAXFS_SIM move.d __bss_start, $r0 -#else - move.d __end, $r0 -#endif move.d [$r0], $r1 cmp.d CRAMFS_MAGIC, $r1 ; cramfs magic? beq 2f ; yes, jump diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c index 6a881e0e92b4..6de8db67cb09 100644 --- a/arch/cris/arch-v32/kernel/irq.c +++ b/arch/cris/arch-v32/kernel/irq.c @@ -37,7 +37,7 @@ #define IGNOREMASK (1 << (SER0_INTR_VECT - FIRST_IRQ)) #elif defined(CONFIG_ETRAX_KGDB_PORT1) #define IGNOREMASK (1 << (SER1_INTR_VECT - FIRST_IRQ)) -#elif defined(CONFIG_ETRAX_KGB_PORT2) +#elif defined(CONFIG_ETRAX_KGDB_PORT2) #define IGNOREMASK (1 << (SER2_INTR_VECT - FIRST_IRQ)) #elif defined(CONFIG_ETRAX_KGDB_PORT3) #define IGNOREMASK (1 << (SER3_INTR_VECT - FIRST_IRQ)) @@ -464,14 +464,14 @@ init_IRQ(void) etrax_irv->v[i] = weird_irq; np = of_find_compatible_node(NULL, NULL, "axis,crisv32-intc"); - domain = irq_domain_add_legacy(np, NR_IRQS - FIRST_IRQ, + domain = irq_domain_add_legacy(np, NBR_INTR_VECT - FIRST_IRQ, FIRST_IRQ, FIRST_IRQ, &crisv32_irq_ops, NULL); BUG_ON(!domain); irq_set_default_host(domain); of_node_put(np); - for (i = FIRST_IRQ, j = 0; j < NR_IRQS; i++, j++) { + for (i = FIRST_IRQ, j = 0; j < NBR_INTR_VECT; i++, j++) { set_exception_vector(i, interrupt[j]); } diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c index b06813aeb120..e0fdea706eca 100644 --- a/arch/cris/arch-v32/kernel/kgdb.c +++ b/arch/cris/arch-v32/kernel/kgdb.c @@ -384,19 +384,11 @@ int getDebugChar(void); /* Serial port, writes one character. ETRAX 100 specific. from debugport.c */ void putDebugChar(int val); -/* Returns the integer equivalent of a hexadecimal character. */ -static int hex(char ch); - /* Convert the memory, pointed to by mem into hexadecimal representation. Put the result in buf, and return a pointer to the last character in buf (null). */ static char *mem2hex(char *buf, unsigned char *mem, int count); -/* Convert the array, in hexadecimal representation, pointed to by buf into - binary representation. Put the result in mem, and return a pointer to - the character after the last byte written. */ -static unsigned char *hex2mem(unsigned char *mem, char *buf, int count); - /* Put the content of the array, in binary representation, pointed to by buf into memory pointed to by mem, and return a pointer to the character after the last byte written. */ @@ -449,7 +441,7 @@ static char output_buffer[BUFMAX]; /* Error and warning messages. */ enum error_type { - SUCCESS, E01, E02, E03, E04, E05, E06, + SUCCESS, E01, E02, E03, E04, E05, E06, E07, E08 }; static char *error_message[] = @@ -461,6 +453,8 @@ static char *error_message[] = "E04 The command is not supported - [s,C,S,!,R,d,r] - internal error.", "E05 Change register content - P - the register is not implemented..", "E06 Change memory content - M - internal error.", + "E07 Change register content - P - the register is not stored on the stack", + "E08 Invalid parameter" }; /********************************** Breakpoint *******************************/ @@ -539,7 +533,7 @@ gdb_cris_strtol(const char *s, char **endptr, int base) /********************************* Register image ****************************/ /* Write a value to a specified register in the register image of the current - thread. Returns status code SUCCESS, E02 or E05. */ + thread. Returns status code SUCCESS, E02, E05 or E08. */ static int write_register(int regno, char *val) { @@ -547,8 +541,9 @@ write_register(int regno, char *val) if (regno >= R0 && regno <= ACR) { /* Consecutive 32-bit registers. */ - hex2mem((unsigned char *)®.r0 + (regno - R0) * sizeof(unsigned int), - val, sizeof(unsigned int)); + if (hex2bin((unsigned char *)®.r0 + (regno - R0) * sizeof(unsigned int), + val, sizeof(unsigned int))) + status = E08; } else if (regno == BZ || regno == VR || regno == WZ || regno == DZ) { /* Read-only registers. */ @@ -557,16 +552,19 @@ write_register(int regno, char *val) } else if (regno == PID) { /* 32-bit register. (Even though we already checked SRS and WZ, we cannot combine this with the EXS - SPC write since SRS and WZ have different size.) */ - hex2mem((unsigned char *)®.pid, val, sizeof(unsigned int)); + if (hex2bin((unsigned char *)®.pid, val, sizeof(unsigned int))) + status = E08; } else if (regno == SRS) { /* 8-bit register. */ - hex2mem((unsigned char *)®.srs, val, sizeof(unsigned char)); + if (hex2bin((unsigned char *)®.srs, val, sizeof(unsigned char))) + status = E08; } else if (regno >= EXS && regno <= SPC) { /* Consecutive 32-bit registers. */ - hex2mem((unsigned char *)®.exs + (regno - EXS) * sizeof(unsigned int), - val, sizeof(unsigned int)); + if (hex2bin((unsigned char *)®.exs + (regno - EXS) * sizeof(unsigned int), + val, sizeof(unsigned int))) + status = E08; } else if (regno == PC) { /* Pseudo-register. Treat as read-only. */ @@ -574,7 +572,9 @@ write_register(int regno, char *val) } else if (regno >= S0 && regno <= S15) { /* 32-bit registers. */ - hex2mem((unsigned char *)&sreg.s0_0 + (reg.srs * 16 * sizeof(unsigned int)) + (regno - S0) * sizeof(unsigned int), val, sizeof(unsigned int)); + if (hex2bin((unsigned char *)&sreg.s0_0 + (reg.srs * 16 * sizeof(unsigned int)) + (regno - S0) * sizeof(unsigned int), + val, sizeof(unsigned int))) + status = E08; } else { /* Non-existing register. */ status = E05; @@ -630,19 +630,6 @@ read_register(char regno, unsigned int *valptr) } /********************************** Packet I/O ******************************/ -/* Returns the integer equivalent of a hexadecimal character. */ -static int -hex(char ch) -{ - if ((ch >= 'a') && (ch <= 'f')) - return (ch - 'a' + 10); - if ((ch >= '0') && (ch <= '9')) - return (ch - '0'); - if ((ch >= 'A') && (ch <= 'F')) - return (ch - 'A' + 10); - return -1; -} - /* Convert the memory, pointed to by mem into hexadecimal representation. Put the result in buf, and return a pointer to the last character in buf (null). */ @@ -689,22 +676,6 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count) return buf; } -/* Convert the array, in hexadecimal representation, pointed to by buf into - binary representation. Put the result in mem, and return a pointer to - the character after the last byte written. */ -static unsigned char* -hex2mem(unsigned char *mem, char *buf, int count) -{ - int i; - unsigned char ch; - for (i = 0; i < count; i++) { - ch = hex (*buf++) << 4; - ch = ch + hex (*buf++); - *mem++ = ch; - } - return mem; -} - /* Put the content of the array, in binary representation, pointed to by buf into memory pointed to by mem, and return a pointer to the character after the last byte written. @@ -763,8 +734,8 @@ getpacket(char *buffer) buffer[count] = 0; if (ch == '#') { - xmitcsum = hex(getDebugChar()) << 4; - xmitcsum += hex(getDebugChar()); + xmitcsum = hex_to_bin(getDebugChar()) << 4; + xmitcsum += hex_to_bin(getDebugChar()); if (checksum != xmitcsum) { /* Wrong checksum */ putDebugChar('-'); @@ -1304,14 +1275,17 @@ handle_exception(int sigval) /* Write registers. GXX..XX Each byte of register data is described by two hex digits. Success: OK - Failure: void. */ + Failure: E08. */ /* General and special registers. */ - hex2mem((char *)®, &input_buffer[1], sizeof(registers)); + if (hex2bin((char *)®, &input_buffer[1], sizeof(registers))) + gdb_cris_strcpy(output_buffer, error_message[E08]); /* Support registers. */ - hex2mem((char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)), + else if (hex2bin((char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)), &input_buffer[1] + sizeof(registers), - 16 * sizeof(unsigned int)); - gdb_cris_strcpy(output_buffer, "OK"); + 16 * sizeof(unsigned int))) + gdb_cris_strcpy(output_buffer, error_message[E08]); + else + gdb_cris_strcpy(output_buffer, "OK"); break; case 'P': @@ -1338,6 +1312,10 @@ handle_exception(int sigval) /* Do not support non-existing registers. */ gdb_cris_strcpy(output_buffer, error_message[E05]); break; + case E08: + /* Invalid parameter. */ + gdb_cris_strcpy(output_buffer, error_message[E08]); + break; default: /* Valid register number. */ gdb_cris_strcpy(output_buffer, "OK"); @@ -1380,7 +1358,7 @@ handle_exception(int sigval) AA..AA is the start address, LLLL is the number of bytes, and XX..XX is the hexadecimal data. Success: OK - Failure: void. */ + Failure: E08. */ { char *lenptr; char *dataptr; @@ -1389,13 +1367,15 @@ handle_exception(int sigval) int len = gdb_cris_strtol(lenptr+1, &dataptr, 16); if (*lenptr == ',' && *dataptr == ':') { if (input_buffer[0] == 'M') { - hex2mem(addr, dataptr + 1, len); + if (hex2bin(addr, dataptr + 1, len)) + gdb_cris_strcpy(output_buffer, error_message[E08]); + else + gdb_cris_strcpy(output_buffer, "OK"); } else /* X */ { bin2mem(addr, dataptr + 1, len); + gdb_cris_strcpy(output_buffer, "OK"); } - gdb_cris_strcpy(output_buffer, "OK"); - } - else { + } else { gdb_cris_strcpy(output_buffer, error_message[E06]); } } diff --git a/arch/cris/arch-v32/kernel/setup.c b/arch/cris/arch-v32/kernel/setup.c index cd1865d68b2e..fe50287aa928 100644 --- a/arch/cris/arch-v32/kernel/setup.c +++ b/arch/cris/arch-v32/kernel/setup.c @@ -129,10 +129,6 @@ static struct i2c_board_info __initdata i2c_info[] = { #ifdef CONFIG_RTC_DRV_PCF8563 {I2C_BOARD_INFO("pcf8563", 0x51)}, #endif -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - {I2C_BOARD_INFO("vgpio", 0x20)}, - {I2C_BOARD_INFO("vgpio", 0x21)}, -#endif {I2C_BOARD_INFO("pca9536", 0x41)}, {I2C_BOARD_INFO("fnp300", 0x40)}, {I2C_BOARD_INFO("fnp300", 0x42)}, @@ -146,10 +142,6 @@ static struct i2c_board_info __initdata i2c_info2[] = { {I2C_BOARD_INFO("tmp100", 0x4C)}, {I2C_BOARD_INFO("tmp100", 0x4D)}, {I2C_BOARD_INFO("tmp100", 0x4E)}, -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO - {I2C_BOARD_INFO("vgpio", 0x20)}, - {I2C_BOARD_INFO("vgpio", 0x21)}, -#endif {I2C_BOARD_INFO("pca9536", 0x41)}, {I2C_BOARD_INFO("fnp300", 0x40)}, {I2C_BOARD_INFO("fnp300", 0x42)}, diff --git a/arch/cris/arch-v32/mach-a3/Makefile b/arch/cris/arch-v32/mach-a3/Makefile index 18a227196a41..0cc6eebacbed 100644 --- a/arch/cris/arch-v32/mach-a3/Makefile +++ b/arch/cris/arch-v32/mach-a3/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := dma.o pinmux.o io.o arbiter.o +obj-y := dma.o pinmux.o arbiter.o clean: diff --git a/arch/cris/arch-v32/mach-a3/io.c b/arch/cris/arch-v32/mach-a3/io.c deleted file mode 100644 index 090ceb99ef0b..000000000000 --- a/arch/cris/arch-v32/mach-a3/io.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Helper functions for I/O pins. - * - * Copyright (c) 2005-2007 Axis Communications AB. - */ - -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/io.h> -#include <mach/pinmux.h> -#include <hwregs/gio_defs.h> - -struct crisv32_ioport crisv32_ioports[] = { - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din), - 32 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din), - 32 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din), - 16 - }, -}; - -#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports) - -struct crisv32_iopin crisv32_led_net0_green; -struct crisv32_iopin crisv32_led_net0_red; -struct crisv32_iopin crisv32_led2_green; -struct crisv32_iopin crisv32_led2_red; -struct crisv32_iopin crisv32_led3_green; -struct crisv32_iopin crisv32_led3_red; - -/* Dummy port used when green LED and red LED is on the same bit */ -static unsigned long io_dummy; -static struct crisv32_ioport dummy_port = { - &io_dummy, - &io_dummy, - &io_dummy, - 32 -}; -static struct crisv32_iopin dummy_led = { - &dummy_port, - 0 -}; - -static int __init crisv32_io_init(void) -{ - int ret = 0; - - u32 i; - - /* Locks *should* be dynamically initialized. */ - for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++) - spin_lock_init(&crisv32_ioports[i].lock); - spin_lock_init(&dummy_port.lock); - - /* Initialize LEDs */ -#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) - ret += crisv32_io_get_name(&crisv32_led_net0_green, - CONFIG_ETRAX_LED_G_NET0); - crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out); - if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) { - ret += crisv32_io_get_name(&crisv32_led_net0_red, - CONFIG_ETRAX_LED_R_NET0); - crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out); - } else - crisv32_led_net0_red = dummy_led; -#endif - - ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G); - ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R); - ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G); - ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R); - - crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out); - - return ret; -} - -__initcall(crisv32_io_init); - -int crisv32_io_get(struct crisv32_iopin *iopin, - unsigned int port, unsigned int pin) -{ - if (port > NBR_OF_PORTS) - return -EINVAL; - if (port > crisv32_ioports[port].pin_count) - return -EINVAL; - - iopin->bit = 1 << pin; - iopin->port = &crisv32_ioports[port]; - - if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) - return -EIO; - - return 0; -} - -int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name) -{ - int port; - int pin; - - if (toupper(*name) == 'P') - name++; - - if (toupper(*name) < 'A' || toupper(*name) > 'E') - return -EINVAL; - - port = toupper(*name) - 'A'; - name++; - pin = simple_strtoul(name, NULL, 10); - - if (pin < 0 || pin > crisv32_ioports[port].pin_count) - return -EINVAL; - - iopin->bit = 1 << pin; - iopin->port = &crisv32_ioports[port]; - - if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) - return -EIO; - - return 0; -} - -#ifdef CONFIG_PCI -/* PCI I/O access stuff */ -struct cris_io_operations *cris_iops = NULL; -EXPORT_SYMBOL(cris_iops); -#endif - diff --git a/arch/cris/arch-v32/mach-fs/Kconfig b/arch/cris/arch-v32/mach-fs/Kconfig index 774de82abef6..7d1ab972bc0f 100644 --- a/arch/cris/arch-v32/mach-fs/Kconfig +++ b/arch/cris/arch-v32/mach-fs/Kconfig @@ -192,25 +192,6 @@ config ETRAX_DEF_GIO_PE_OUT Configures the initial data for the general port E bits. Most products should use 00000 here. -config ETRAX_DEF_GIO_PV_OE - hex "GIO_PV_OE" - depends on ETRAX_VIRTUAL_GPIO - default "0000" - help - Configures the direction of virtual general port V bits. 1 is out, - 0 is in. This is often totally different depending on the product - used. These bits are used for all kinds of stuff. If you don't know - what to use, it is always safe to put all as inputs, although - floating inputs isn't good. - -config ETRAX_DEF_GIO_PV_OUT - hex "GIO_PV_OUT" - depends on ETRAX_VIRTUAL_GPIO - default "0000" - help - Configures the initial data for the virtual general port V bits. - Most products should use 0000 here. - endmenu endif diff --git a/arch/cris/arch-v32/mach-fs/Makefile b/arch/cris/arch-v32/mach-fs/Makefile index 18a227196a41..0cc6eebacbed 100644 --- a/arch/cris/arch-v32/mach-fs/Makefile +++ b/arch/cris/arch-v32/mach-fs/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := dma.o pinmux.o io.o arbiter.o +obj-y := dma.o pinmux.o arbiter.o clean: diff --git a/arch/cris/arch-v32/mach-fs/io.c b/arch/cris/arch-v32/mach-fs/io.c deleted file mode 100644 index a6958661fa8e..000000000000 --- a/arch/cris/arch-v32/mach-fs/io.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * Helper functions for I/O pins. - * - * Copyright (c) 2004-2007 Axis Communications AB. - */ - -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/io.h> -#include <mach/pinmux.h> -#include <hwregs/gio_defs.h> - -#ifndef DEBUG -#define DEBUG(x) -#endif - -struct crisv32_ioport crisv32_ioports[] = { - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pa_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pa_din), - 8 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pb_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pb_din), - 18 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pc_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pc_din), - 18 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pd_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pd_din), - 18 - }, - { - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_oe), - (unsigned long *)REG_ADDR(gio, regi_gio, rw_pe_dout), - (unsigned long *)REG_ADDR(gio, regi_gio, r_pe_din), - 18 - } -}; - -#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports) - -struct crisv32_iopin crisv32_led_net0_green; -struct crisv32_iopin crisv32_led_net0_red; -struct crisv32_iopin crisv32_led_net1_green; -struct crisv32_iopin crisv32_led_net1_red; -struct crisv32_iopin crisv32_led2_green; -struct crisv32_iopin crisv32_led2_red; -struct crisv32_iopin crisv32_led3_green; -struct crisv32_iopin crisv32_led3_red; - -/* Dummy port used when green LED and red LED is on the same bit */ -static unsigned long io_dummy; -static struct crisv32_ioport dummy_port = { - &io_dummy, - &io_dummy, - &io_dummy, - 18 -}; -static struct crisv32_iopin dummy_led = { - &dummy_port, - 0 -}; - -static int __init crisv32_io_init(void) -{ - int ret = 0; - - u32 i; - - /* Locks *should* be dynamically initialized. */ - for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++) - spin_lock_init(&crisv32_ioports[i].lock); - spin_lock_init(&dummy_port.lock); - - /* Initialize LEDs */ -#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) - ret += - crisv32_io_get_name(&crisv32_led_net0_green, - CONFIG_ETRAX_LED_G_NET0); - crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out); - if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) { - ret += - crisv32_io_get_name(&crisv32_led_net0_red, - CONFIG_ETRAX_LED_R_NET0); - crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out); - } else - crisv32_led_net0_red = dummy_led; -#endif - -#ifdef CONFIG_ETRAX_NBR_LED_GRP_TWO - ret += - crisv32_io_get_name(&crisv32_led_net1_green, - CONFIG_ETRAX_LED_G_NET1); - crisv32_io_set_dir(&crisv32_led_net1_green, crisv32_io_dir_out); - if (strcmp(CONFIG_ETRAX_LED_G_NET1, CONFIG_ETRAX_LED_R_NET1)) { - crisv32_io_get_name(&crisv32_led_net1_red, - CONFIG_ETRAX_LED_R_NET1); - crisv32_io_set_dir(&crisv32_led_net1_red, crisv32_io_dir_out); - } else - crisv32_led_net1_red = dummy_led; -#endif - - ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_V32_LED2G); - ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_V32_LED2R); - ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_V32_LED3G); - ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_V32_LED3R); - - crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out); - crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out); - - return ret; -} - -__initcall(crisv32_io_init); - -int crisv32_io_get(struct crisv32_iopin *iopin, - unsigned int port, unsigned int pin) -{ - if (port > NBR_OF_PORTS) - return -EINVAL; - if (port > crisv32_ioports[port].pin_count) - return -EINVAL; - - iopin->bit = 1 << pin; - iopin->port = &crisv32_ioports[port]; - - /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */ - /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */ - if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio)) - return -EIO; - DEBUG(printk(KERN_DEBUG "crisv32_io_get: Allocated pin %d on port %d\n", - pin, port)); - - return 0; -} - -int crisv32_io_get_name(struct crisv32_iopin *iopin, const char *name) -{ - int port; - int pin; - - if (toupper(*name) == 'P') - name++; - - if (toupper(*name) < 'A' || toupper(*name) > 'E') - return -EINVAL; - - port = toupper(*name) - 'A'; - name++; - pin = simple_strtoul(name, NULL, 10); - - if (pin < 0 || pin > crisv32_ioports[port].pin_count) - return -EINVAL; - - iopin->bit = 1 << pin; - iopin->port = &crisv32_ioports[port]; - - /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */ - /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */ - if (port != 0 && crisv32_pinmux_alloc(port - 1, pin, pin, pinmux_gpio)) - return -EIO; - - DEBUG(printk(KERN_DEBUG - "crisv32_io_get_name: Allocated pin %d on port %d\n", - pin, port)); - - return 0; -} - -#ifdef CONFIG_PCI -/* PCI I/O access stuff */ -struct cris_io_operations *cris_iops = NULL; -EXPORT_SYMBOL(cris_iops); -#endif diff --git a/arch/cris/boot/dts/artpec3.dtsi b/arch/cris/boot/dts/artpec3.dtsi new file mode 100644 index 000000000000..be15be67b653 --- /dev/null +++ b/arch/cris/boot/dts/artpec3.dtsi @@ -0,0 +1,46 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "axis,crisv32"; + reg = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + model = "artpec3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + intc: interrupt-controller { + compatible = "axis,crisv32-intc"; + reg = <0xb002a000 0x1000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gio: gpio@b0020000 { + compatible = "axis,artpec3-gio"; + reg = <0xb0020000 0x1000>; + interrupts = <61>; + gpio-controller; + #gpio-cells = <3>; + }; + + serial@b003e000 { + compatible = "axis,etraxfs-uart"; + reg = <0xb003e000 0x1000>; + interrupts = <64>; + status = "disabled"; + }; + }; +}; diff --git a/arch/cris/boot/dts/dev88.dts b/arch/cris/boot/dts/dev88.dts index 4fa5a3f9d0ec..b9a230d10874 100644 --- a/arch/cris/boot/dts/dev88.dts +++ b/arch/cris/boot/dts/dev88.dts @@ -1,5 +1,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> + /include/ "etraxfs.dtsi" / { @@ -15,4 +17,51 @@ status = "okay"; }; }; + + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + gpio-sck = <&gio 1 0 0xd>; + gpio-miso = <&gio 4 0 0xd>; + gpio-mosi = <&gio 0 0 0xd>; + cs-gpios = <&gio 3 0 0xd>; + num-chipselects = <1>; + + temp-sensor@0 { + compatible = "ti,lm70"; + reg = <0>; + + spi-max-frequency = <100000>; + }; + }; + + i2c { + compatible = "i2c-gpio"; + gpios = <&gio 5 0 0xd>, <&gio 6 0 0xd>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + leds { + compatible = "gpio-leds"; + + network { + label = "network"; + gpios = <&gio 2 GPIO_ACTIVE_LOW 0xa>; + }; + + status { + label = "status"; + gpios = <&gio 3 GPIO_ACTIVE_LOW 0xa>; + linux,default-trigger = "heartbeat"; + }; + }; }; diff --git a/arch/cris/boot/dts/etraxfs.dtsi b/arch/cris/boot/dts/etraxfs.dtsi index 909bcedc3565..bf1b8582d4d8 100644 --- a/arch/cris/boot/dts/etraxfs.dtsi +++ b/arch/cris/boot/dts/etraxfs.dtsi @@ -28,6 +28,14 @@ #interrupt-cells = <1>; }; + gio: gpio@b001a000 { + compatible = "axis,etraxfs-gio"; + reg = <0xb001a000 0x1000>; + interrupts = <50>; + gpio-controller; + #gpio-cells = <3>; + }; + serial@b00260000 { compatible = "axis,etraxfs-uart"; reg = <0xb0026000 0x1000>; diff --git a/arch/cris/boot/dts/include/dt-bindings b/arch/cris/boot/dts/include/dt-bindings new file mode 120000 index 000000000000..08c00e4972fa --- /dev/null +++ b/arch/cris/boot/dts/include/dt-bindings @@ -0,0 +1 @@ +../../../../../include/dt-bindings
\ No newline at end of file diff --git a/arch/cris/boot/dts/p1343.dts b/arch/cris/boot/dts/p1343.dts new file mode 100644 index 000000000000..fab7bdbd0f15 --- /dev/null +++ b/arch/cris/boot/dts/p1343.dts @@ -0,0 +1,76 @@ +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/include/ "artpec3.dtsi" + +/ { + model = "Axis P1343 Network Camera"; + compatible = "axis,p1343"; + + aliases { + serial0 = &uart0; + }; + + soc { + uart0: serial@b003e000 { + status = "okay"; + }; + }; + + i2c { + compatible = "i2c-gpio"; + gpios = <&gio 3 0 0xa>, <&gio 2 0 0xa>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + leds { + compatible = "gpio-leds"; + + status_green { + label = "status:green"; + gpios = <&gio 0 GPIO_ACTIVE_LOW 0xc>; + linux,default-trigger = "heartbeat"; + }; + + status_red { + label = "status:red"; + gpios = <&gio 1 GPIO_ACTIVE_LOW 0xc>; + }; + + network_green { + label = "network:green"; + gpios = <&gio 2 GPIO_ACTIVE_LOW 0xc>; + }; + + network_red { + label = "network:red"; + gpios = <&gio 3 GPIO_ACTIVE_LOW 0xc>; + }; + + power_red { + label = "power:red"; + gpios = <&gio 4 GPIO_ACTIVE_LOW 0xc>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + activity-button@0 { + label = "Activity Button"; + linux,code = <KEY_FN>; + gpios = <&gio 13 GPIO_ACTIVE_LOW 0xd>; + }; + }; +}; diff --git a/arch/cris/boot/rescue/head_v10.S b/arch/cris/boot/rescue/head_v10.S index af55df0994b3..1c05492f3eb2 100644 --- a/arch/cris/boot/rescue/head_v10.S +++ b/arch/cris/boot/rescue/head_v10.S @@ -281,9 +281,6 @@ wait_ser: #ifdef CONFIG_ETRAX_PB_LEDS move.b $r2, [R_PORT_PB_DATA] #endif -#ifdef CONFIG_ETRAX_90000000_LEDS - move.b $r2, [0x90000000] -#endif #endif ;; check if we got something on the serial port diff --git a/arch/cris/include/arch-v32/arch/io.h b/arch/cris/include/arch-v32/arch/io.h deleted file mode 100644 index adc5484351bf..000000000000 --- a/arch/cris/include/arch-v32/arch/io.h +++ /dev/null @@ -1,140 +0,0 @@ -#ifndef _ASM_ARCH_CRIS_IO_H -#define _ASM_ARCH_CRIS_IO_H - -#include <linux/spinlock.h> -#include <hwregs/reg_map.h> -#include <hwregs/reg_rdwr.h> -#include <hwregs/gio_defs.h> - -enum crisv32_io_dir -{ - crisv32_io_dir_in = 0, - crisv32_io_dir_out = 1 -}; - -struct crisv32_ioport -{ - volatile unsigned long *oe; - volatile unsigned long *data; - volatile unsigned long *data_in; - unsigned int pin_count; - spinlock_t lock; -}; - -struct crisv32_iopin -{ - struct crisv32_ioport* port; - int bit; -}; - -extern struct crisv32_ioport crisv32_ioports[]; - -extern struct crisv32_iopin crisv32_led1_green; -extern struct crisv32_iopin crisv32_led1_red; -extern struct crisv32_iopin crisv32_led2_green; -extern struct crisv32_iopin crisv32_led2_red; -extern struct crisv32_iopin crisv32_led3_green; -extern struct crisv32_iopin crisv32_led3_red; - -extern struct crisv32_iopin crisv32_led_net0_green; -extern struct crisv32_iopin crisv32_led_net0_red; -extern struct crisv32_iopin crisv32_led_net1_green; -extern struct crisv32_iopin crisv32_led_net1_red; - -static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val) -{ - unsigned long flags; - spin_lock_irqsave(&iopin->port->lock, flags); - - if (iopin->port->data) { - if (val) - *iopin->port->data |= iopin->bit; - else - *iopin->port->data &= ~iopin->bit; - } - - spin_unlock_irqrestore(&iopin->port->lock, flags); -} - -static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin, - enum crisv32_io_dir dir) -{ - unsigned long flags; - spin_lock_irqsave(&iopin->port->lock, flags); - - if (iopin->port->oe) { - if (dir == crisv32_io_dir_in) - *iopin->port->oe &= ~iopin->bit; - else - *iopin->port->oe |= iopin->bit; - } - - spin_unlock_irqrestore(&iopin->port->lock, flags); -} - -static inline int crisv32_io_rd(struct crisv32_iopin* iopin) -{ - return ((*iopin->port->data_in & iopin->bit) ? 1 : 0); -} - -int crisv32_io_get(struct crisv32_iopin* iopin, - unsigned int port, unsigned int pin); -int crisv32_io_get_name(struct crisv32_iopin* iopin, - const char *name); - -#define CRIS_LED_OFF 0x00 -#define CRIS_LED_GREEN 0x01 -#define CRIS_LED_RED 0x02 -#define CRIS_LED_ORANGE (CRIS_LED_GREEN | CRIS_LED_RED) - -#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) -#define CRIS_LED_NETWORK_GRP0_SET(x) \ - do { \ - CRIS_LED_NETWORK_GRP0_SET_G((x) & CRIS_LED_GREEN); \ - CRIS_LED_NETWORK_GRP0_SET_R((x) & CRIS_LED_RED); \ - } while (0) -#else -#define CRIS_LED_NETWORK_GRP0_SET(x) while (0) {} -#endif - -#define CRIS_LED_NETWORK_GRP0_SET_G(x) \ - crisv32_io_set(&crisv32_led_net0_green, !(x)); - -#define CRIS_LED_NETWORK_GRP0_SET_R(x) \ - crisv32_io_set(&crisv32_led_net0_red, !(x)); - -#if defined(CONFIG_ETRAX_NBR_LED_GRP_TWO) -#define CRIS_LED_NETWORK_GRP1_SET(x) \ - do { \ - CRIS_LED_NETWORK_GRP1_SET_G((x) & CRIS_LED_GREEN); \ - CRIS_LED_NETWORK_GRP1_SET_R((x) & CRIS_LED_RED); \ - } while (0) -#else -#define CRIS_LED_NETWORK_GRP1_SET(x) while (0) {} -#endif - -#define CRIS_LED_NETWORK_GRP1_SET_G(x) \ - crisv32_io_set(&crisv32_led_net1_green, !(x)); - -#define CRIS_LED_NETWORK_GRP1_SET_R(x) \ - crisv32_io_set(&crisv32_led_net1_red, !(x)); - -#define CRIS_LED_ACTIVE_SET(x) \ - do { \ - CRIS_LED_ACTIVE_SET_G((x) & CRIS_LED_GREEN); \ - CRIS_LED_ACTIVE_SET_R((x) & CRIS_LED_RED); \ - } while (0) - -#define CRIS_LED_ACTIVE_SET_G(x) \ - crisv32_io_set(&crisv32_led2_green, !(x)); -#define CRIS_LED_ACTIVE_SET_R(x) \ - crisv32_io_set(&crisv32_led2_red, !(x)); -#define CRIS_LED_DISK_WRITE(x) \ - do{\ - crisv32_io_set(&crisv32_led3_green, !(x)); \ - crisv32_io_set(&crisv32_led3_red, !(x)); \ - }while(0) -#define CRIS_LED_DISK_READ(x) \ - crisv32_io_set(&crisv32_led3_green, !(x)); - -#endif diff --git a/arch/cris/include/arch-v32/arch/irq.h b/arch/cris/include/arch-v32/arch/irq.h index 0c1b4d3a34e7..8270a1bbfdb6 100644 --- a/arch/cris/include/arch-v32/arch/irq.h +++ b/arch/cris/include/arch-v32/arch/irq.h @@ -4,7 +4,7 @@ #include <hwregs/intr_vect.h> /* Number of non-cpu interrupts. */ -#define NR_IRQS NBR_INTR_VECT /* Exceptions + IRQs */ +#define NR_IRQS (NBR_INTR_VECT + 256) /* Exceptions + IRQs */ #define FIRST_IRQ 0x31 /* Exception number for first IRQ */ #define NR_REAL_IRQS (NBR_INTR_VECT - FIRST_IRQ) /* IRQs */ #if NR_REAL_IRQS > 32 diff --git a/arch/cris/include/asm/eshlibld.h b/arch/cris/include/asm/eshlibld.h index 10ce36cf79a9..70aa448256b0 100644 --- a/arch/cris/include/asm/eshlibld.h +++ b/arch/cris/include/asm/eshlibld.h @@ -45,8 +45,7 @@ assumed that we want to share code when debugging (exposes more trouble). */ #ifndef SHARE_LIB_CORE -# if (defined(__KERNEL__) || !defined(RELOC_DEBUG)) \ - && !defined(CONFIG_SHARE_SHLIB_CORE) +# if (defined(__KERNEL__) || !defined(RELOC_DEBUG)) # define SHARE_LIB_CORE 0 # else # define SHARE_LIB_CORE 1 diff --git a/arch/cris/include/asm/io.h b/arch/cris/include/asm/io.h index 752a3f45df60..cce8664d5dd6 100644 --- a/arch/cris/include/asm/io.h +++ b/arch/cris/include/asm/io.h @@ -2,7 +2,9 @@ #define _ASM_CRIS_IO_H #include <asm/page.h> /* for __va, __pa */ +#ifdef CONFIG_ETRAX_ARCH_V10 #include <arch/io.h> +#endif #include <asm-generic/iomap.h> #include <linux/kernel.h> diff --git a/arch/cris/include/uapi/asm/etraxgpio.h b/arch/cris/include/uapi/asm/etraxgpio.h index 461c089db765..c6e7d57c8b24 100644 --- a/arch/cris/include/uapi/asm/etraxgpio.h +++ b/arch/cris/include/uapi/asm/etraxgpio.h @@ -11,26 +11,6 @@ * g1-g7 and g25-g31 is both input and outputs but on different pins * Also note that some bits change pins depending on what interfaces * are enabled. - * - * For ETRAX FS (CONFIG_ETRAXFS): - * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction - * /dev/gpiob minor 1, 18 bit GPIO, each bit can change direction - * /dev/gpioc minor 3, 18 bit GPIO, each bit can change direction - * /dev/gpiod minor 4, 18 bit GPIO, each bit can change direction - * /dev/gpioe minor 5, 18 bit GPIO, each bit can change direction - * /dev/leds minor 2, Access to leds depending on kernelconfig - * - * For ARTPEC-3 (CONFIG_CRIS_MACH_ARTPEC3): - * /dev/gpioa minor 0, 32 bit GPIO, each bit can change direction - * /dev/gpiob minor 1, 32 bit GPIO, each bit can change direction - * /dev/gpioc minor 3, 16 bit GPIO, each bit can change direction - * /dev/gpiod minor 4, 32 bit GPIO, input only - * /dev/leds minor 2, Access to leds depending on kernelconfig - * /dev/pwm0 minor 16, PWM channel 0 on PA30 - * /dev/pwm1 minor 17, PWM channel 1 on PA31 - * /dev/pwm2 minor 18, PWM channel 2 on PB26 - * /dev/ppwm minor 19, PPWM channel - * */ #ifndef _ASM_ETRAXGPIO_H #define _ASM_ETRAXGPIO_H @@ -40,52 +20,12 @@ #define ETRAXGPIO_IOCTYPE 43 /* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */ -#ifdef CONFIG_ETRAX_ARCH_V10 #define GPIO_MINOR_A 0 #define GPIO_MINOR_B 1 #define GPIO_MINOR_LEDS 2 #define GPIO_MINOR_G 3 #define GPIO_MINOR_LAST 3 #define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST -#endif - -#ifdef CONFIG_ETRAXFS -#define GPIO_MINOR_A 0 -#define GPIO_MINOR_B 1 -#define GPIO_MINOR_LEDS 2 -#define GPIO_MINOR_C 3 -#define GPIO_MINOR_D 4 -#define GPIO_MINOR_E 5 -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -#define GPIO_MINOR_V 6 -#define GPIO_MINOR_LAST 6 -#else -#define GPIO_MINOR_LAST 5 -#endif -#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST -#endif - -#ifdef CONFIG_CRIS_MACH_ARTPEC3 -#define GPIO_MINOR_A 0 -#define GPIO_MINOR_B 1 -#define GPIO_MINOR_LEDS 2 -#define GPIO_MINOR_C 3 -#define GPIO_MINOR_D 4 -#ifdef CONFIG_ETRAX_VIRTUAL_GPIO -#define GPIO_MINOR_V 6 -#define GPIO_MINOR_LAST 6 -#else -#define GPIO_MINOR_LAST 4 -#endif -#define GPIO_MINOR_FIRST_PWM 16 -#define GPIO_MINOR_PWM0 (GPIO_MINOR_FIRST_PWM+0) -#define GPIO_MINOR_PWM1 (GPIO_MINOR_FIRST_PWM+1) -#define GPIO_MINOR_PWM2 (GPIO_MINOR_FIRST_PWM+2) -#define GPIO_MINOR_PPWM (GPIO_MINOR_FIRST_PWM+3) -#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PPWM -#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST_PWM -#endif - /* supported ioctl _IOC_NR's */ @@ -139,101 +79,4 @@ #define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output, */ /* *arg updated with current output pins. */ -/* The following ioctl's are applicable to the PWM channels only */ - -#define IO_PWM_SET_MODE 0x20 - -enum io_pwm_mode { - PWM_OFF = 0, /* disabled, deallocated */ - PWM_STANDARD = 1, /* 390 kHz, duty cycle 0..255/256 */ - PWM_FAST = 2, /* variable freq, w/ 10ns active pulse len */ - PWM_VARFREQ = 3, /* individually configurable high/low periods */ - PWM_SOFT = 4 /* software generated */ -}; - -struct io_pwm_set_mode { - enum io_pwm_mode mode; -}; - -/* Only for mode PWM_VARFREQ. Period lo/high set in increments of 10ns - * from 10ns (value = 0) to 81920ns (value = 8191) - * (Resulting frequencies range from 50 MHz (10ns + 10ns) down to - * 6.1 kHz (81920ns + 81920ns) at 50% duty cycle, to 12.2 kHz at min/max duty - * cycle (81920 + 10ns or 10ns + 81920ns, respectively).) - */ -#define IO_PWM_SET_PERIOD 0x21 - -struct io_pwm_set_period { - unsigned int lo; /* 0..8191 */ - unsigned int hi; /* 0..8191 */ -}; - -/* Only for modes PWM_STANDARD and PWM_FAST. - * For PWM_STANDARD, set duty cycle of 390 kHz PWM output signal, from - * 0 (value = 0) to 255/256 (value = 255). - * For PWM_FAST, set duty cycle of PWM output signal from - * 0% (value = 0) to 100% (value = 255). Output signal in this mode - * is a 10ns pulse surrounded by a high or low level depending on duty - * cycle (except for 0% and 100% which result in a constant output). - * Resulting output frequency varies from 50 MHz at 50% duty cycle, - * down to 390 kHz at min/max duty cycle. - */ -#define IO_PWM_SET_DUTY 0x22 - -struct io_pwm_set_duty { - int duty; /* 0..255 */ -}; - -/* Returns information about the latest PWM pulse. - * lo: Length of the latest low period, in units of 10ns. - * hi: Length of the latest high period, in units of 10ns. - * cnt: Time since last detected edge, in units of 10ns. - * - * The input source to PWM is decied by IO_PWM_SET_INPUT_SRC. - * - * NOTE: All PWM devices is connected to the same input source. - */ -#define IO_PWM_GET_PERIOD 0x23 - -struct io_pwm_get_period { - unsigned int lo; - unsigned int hi; - unsigned int cnt; -}; - -/* Sets the input source for the PWM input. For the src value see the - * register description for gio:rw_pwm_in_cfg. - * - * NOTE: All PWM devices is connected to the same input source. - */ -#define IO_PWM_SET_INPUT_SRC 0x24 -struct io_pwm_set_input_src { - unsigned int src; /* 0..7 */ -}; - -/* Sets the duty cycles in steps of 1/256, 0 = 0%, 255 = 100% duty cycle */ -#define IO_PPWM_SET_DUTY 0x25 - -struct io_ppwm_set_duty { - int duty; /* 0..255 */ -}; - -/* Configuraton struct for the IO_PWMCLK_SET_CONFIG ioctl to configure - * PWM capable gpio pins: - */ -#define IO_PWMCLK_SETGET_CONFIG 0x26 -struct gpio_pwmclk_conf { - unsigned int gpiopin; /* The pin number based on the opened device */ - unsigned int baseclk; /* The base clock to use, or sw will select one close*/ - unsigned int low; /* The number of low periods of the baseclk */ - unsigned int high; /* The number of high periods of the baseclk */ -}; - -/* Examples: - * To get a symmetric 12 MHz clock without knowing anything about the hardware: - * baseclk = 12000000, low = 0, high = 0 - * To just get info of current setting: - * baseclk = 0, low = 0, high = 0, the values will be updated by driver. - */ - #endif diff --git a/arch/cris/kernel/crisksyms.c b/arch/cris/kernel/crisksyms.c index e704f81f85cc..31b4bd288cad 100644 --- a/arch/cris/kernel/crisksyms.c +++ b/arch/cris/kernel/crisksyms.c @@ -18,7 +18,6 @@ #include <asm/pgtable.h> #include <asm/fasttimer.h> -extern unsigned long get_cmos_time(void); extern void __Udiv(void); extern void __Umod(void); extern void __Div(void); @@ -30,7 +29,6 @@ extern void __negdi2(void); extern void iounmap(volatile void * __iomem); /* Platform dependent support */ -EXPORT_SYMBOL(get_cmos_time); EXPORT_SYMBOL(loops_per_usec); /* Math functions */ diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c index 7780d379522f..2dda6da71521 100644 --- a/arch/cris/kernel/time.c +++ b/arch/cris/kernel/time.c @@ -39,31 +39,6 @@ extern unsigned long loops_per_jiffy; /* init/main.c */ unsigned long loops_per_usec; -int set_rtc_mmss(unsigned long nowtime) -{ - D(printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime)); - return 0; -} - -/* grab the time from the RTC chip */ -unsigned long get_cmos_time(void) -{ - return 0; -} - - -int update_persistent_clock(struct timespec now) -{ - return set_rtc_mmss(now.tv_sec); -} - -void read_persistent_clock(struct timespec *ts) -{ - ts->tv_sec = 0; - ts->tv_nsec = 0; -} - - extern void cris_profile_sample(struct pt_regs* regs); void diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index 99c96a5e6016..db73390568c8 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -11,7 +11,7 @@ -#define NR_syscalls 321 /* length of syscall table */ +#define NR_syscalls 322 /* length of syscall table */ /* * The following defines stop scripts/checksyscalls.sh from complaining about diff --git a/arch/ia64/include/uapi/asm/unistd.h b/arch/ia64/include/uapi/asm/unistd.h index 98e94e19a5a0..9038726e7d26 100644 --- a/arch/ia64/include/uapi/asm/unistd.h +++ b/arch/ia64/include/uapi/asm/unistd.h @@ -334,5 +334,6 @@ #define __NR_execveat 1342 #define __NR_userfaultfd 1343 #define __NR_membarrier 1344 +#define __NR_kcmp 1345 #endif /* _UAPI_ASM_IA64_UNISTD_H */ diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 37cc7a65cd3e..dcd97f84d065 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1770,5 +1770,6 @@ sys_call_table: data8 sys_execveat data8 sys_userfaultfd data8 sys_membarrier + data8 sys_kcmp // 1345 .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls diff --git a/arch/m68k/sun3/idprom.c b/arch/m68k/sun3/idprom.c index c86ac37d1983..cfe9aa422343 100644 --- a/arch/m68k/sun3/idprom.c +++ b/arch/m68k/sun3/idprom.c @@ -125,8 +125,5 @@ void __init idprom_init(void) display_system_type(idprom->id_machtype); - printk("Ethernet address: %x:%x:%x:%x:%x:%x\n", - idprom->id_ethaddr[0], idprom->id_ethaddr[1], - idprom->id_ethaddr[2], idprom->id_ethaddr[3], - idprom->id_ethaddr[4], idprom->id_ethaddr[5]); + printk("Ethernet address: %pM\n", idprom->id_ethaddr); } diff --git a/arch/mips/configs/pistachio_defconfig b/arch/mips/configs/pistachio_defconfig index 642b50946943..8b7429127a1d 100644 --- a/arch/mips/configs/pistachio_defconfig +++ b/arch/mips/configs/pistachio_defconfig @@ -257,7 +257,6 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_TEST=m CONFIG_MMC_DW=y -CONFIG_MMC_DW_IDMAC=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_RTC_CLASS=y diff --git a/arch/mips/mti-sead3/Makefile b/arch/mips/mti-sead3/Makefile index 2e52cbd20ceb..7a584e0bf933 100644 --- a/arch/mips/mti-sead3/Makefile +++ b/arch/mips/mti-sead3/Makefile @@ -12,6 +12,4 @@ obj-y := sead3-lcd.o sead3-display.o sead3-init.o \ sead3-int.o sead3-platform.o sead3-reset.o \ sead3-setup.o sead3-time.o -obj-y += leds-sead3.o - obj-$(CONFIG_EARLY_PRINTK) += sead3-console.o diff --git a/arch/mips/mti-sead3/leds-sead3.c b/arch/mips/mti-sead3/leds-sead3.c deleted file mode 100644 index c938ceeb8848..000000000000 --- a/arch/mips/mti-sead3/leds-sead3.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. - * Copyright (C) 2015 Imagination Technologies, Inc. - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/leds.h> -#include <linux/err.h> -#include <linux/io.h> - -#include <asm/mips-boards/sead3-addr.h> - -static void sead3_pled_set(struct led_classdev *led_cdev, - enum led_brightness value) -{ - writel(value, (void __iomem *)SEAD3_CPLD_P_LED); -} - -static void sead3_fled_set(struct led_classdev *led_cdev, - enum led_brightness value) -{ - writel(value, (void __iomem *)SEAD3_CPLD_F_LED); -} - -static struct led_classdev sead3_pled = { - .name = "sead3::pled", - .brightness_set = sead3_pled_set, - .flags = LED_CORE_SUSPENDRESUME, -}; - -static struct led_classdev sead3_fled = { - .name = "sead3::fled", - .brightness_set = sead3_fled_set, - .flags = LED_CORE_SUSPENDRESUME, -}; - -static int sead3_led_probe(struct platform_device *pdev) -{ - int ret; - - ret = led_classdev_register(&pdev->dev, &sead3_pled); - if (ret < 0) - return ret; - - ret = led_classdev_register(&pdev->dev, &sead3_fled); - if (ret < 0) - led_classdev_unregister(&sead3_pled); - - return ret; -} - -static int sead3_led_remove(struct platform_device *pdev) -{ - led_classdev_unregister(&sead3_pled); - led_classdev_unregister(&sead3_fled); - return 0; -} - -static struct platform_driver sead3_led_driver = { - .probe = sead3_led_probe, - .remove = sead3_led_remove, - .driver = { - .name = "sead3-led", - }, -}; - -module_platform_driver(sead3_led_driver); - -MODULE_AUTHOR("Kristian Kielhofner <kris@krisk.org>"); -MODULE_DESCRIPTION("SEAD3 LED driver"); -MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 6bc0ee4b1070..2c041b535a64 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -111,7 +111,7 @@ CONFIG_SCSI_QLA_FC=m CONFIG_SCSI_QLA_ISCSI=m CONFIG_SCSI_LPFC=m CONFIG_SCSI_VIRTIO=m -CONFIG_SCSI_DH=m +CONFIG_SCSI_DH=y CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_ALUA=m CONFIG_ATA=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 7991f37e5fe2..36871a4bfa54 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -114,7 +114,7 @@ CONFIG_SCSI_QLA_FC=m CONFIG_SCSI_QLA_ISCSI=m CONFIG_SCSI_LPFC=m CONFIG_SCSI_VIRTIO=m -CONFIG_SCSI_DH=m +CONFIG_SCSI_DH=y CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_ALUA=m CONFIG_ATA=y diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h index 0dc42c5082b7..5f8229e24fe6 100644 --- a/arch/powerpc/include/asm/cache.h +++ b/arch/powerpc/include/asm/cache.h @@ -3,7 +3,6 @@ #ifdef __KERNEL__ -#include <asm/reg.h> /* bytes per L1 cache line */ #if defined(CONFIG_8xx) || defined(CONFIG_403GCX) @@ -40,12 +39,6 @@ struct ppc64_caches { }; extern struct ppc64_caches ppc64_caches; - -static inline void logmpp(u64 x) -{ - asm volatile(PPC_LOGMPP(R1) : : "r" (x)); -} - #endif /* __powerpc64__ && ! __ASSEMBLY__ */ #if defined(__ASSEMBLY__) diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index 827a38d7a9db..887c259556df 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -297,8 +297,6 @@ struct kvmppc_vcore { u32 arch_compat; ulong pcr; ulong dpdes; /* doorbell state (POWER8) */ - void *mpp_buffer; /* Micro Partition Prefetch buffer */ - bool mpp_buffer_is_valid; ulong conferring_threads; }; diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index cab6753f1be5..3f191f573d4f 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -61,8 +61,13 @@ struct machdep_calls { unsigned long addr, unsigned char *hpte_slot_array, int psize, int ssize, int local); - /* special for kexec, to be called in real mode, linear mapping is - * destroyed as well */ + /* + * Special for kexec. + * To be called in real mode with interrupts disabled. No locks are + * taken as such, concurrent access on pre POWER5 hardware could result + * in a deadlock. + * The linear mapping is destroyed as well. + */ void (*hpte_clear_all)(void); void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size, diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index 790f5d1d9a46..7ab04fc59e24 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -141,7 +141,6 @@ #define PPC_INST_ISEL 0x7c00001e #define PPC_INST_ISEL_MASK 0xfc00003e #define PPC_INST_LDARX 0x7c0000a8 -#define PPC_INST_LOGMPP 0x7c0007e4 #define PPC_INST_LSWI 0x7c0004aa #define PPC_INST_LSWX 0x7c00042a #define PPC_INST_LWARX 0x7c000028 @@ -285,20 +284,6 @@ #define __PPC_EH(eh) 0 #endif -/* POWER8 Micro Partition Prefetch (MPP) parameters */ -/* Address mask is common for LOGMPP instruction and MPPR SPR */ -#define PPC_MPPE_ADDRESS_MASK 0xffffffffc000ULL - -/* Bits 60 and 61 of MPP SPR should be set to one of the following */ -/* Aborting the fetch is indeed setting 00 in the table size bits */ -#define PPC_MPPR_FETCH_ABORT (0x0ULL << 60) -#define PPC_MPPR_FETCH_WHOLE_TABLE (0x2ULL << 60) - -/* Bits 54 and 55 of register for LOGMPP instruction should be set to: */ -#define PPC_LOGMPP_LOG_L2 (0x02ULL << 54) -#define PPC_LOGMPP_LOG_L2L3 (0x01ULL << 54) -#define PPC_LOGMPP_LOG_ABORT (0x03ULL << 54) - /* Deal with instructions that older assemblers aren't aware of */ #define PPC_DCBAL(a, b) stringify_in_c(.long PPC_INST_DCBAL | \ __PPC_RA(a) | __PPC_RB(b)) @@ -307,8 +292,6 @@ #define PPC_LDARX(t, a, b, eh) stringify_in_c(.long PPC_INST_LDARX | \ ___PPC_RT(t) | ___PPC_RA(a) | \ ___PPC_RB(b) | __PPC_EH(eh)) -#define PPC_LOGMPP(b) stringify_in_c(.long PPC_INST_LOGMPP | \ - __PPC_RB(b)) #define PPC_LWARX(t, a, b, eh) stringify_in_c(.long PPC_INST_LWARX | \ ___PPC_RT(t) | ___PPC_RA(a) | \ ___PPC_RB(b) | __PPC_EH(eh)) diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index aa1cc5f015ee..a908ada8e0a5 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -226,7 +226,6 @@ #define CTRL_TE 0x00c00000 /* thread enable */ #define CTRL_RUNLATCH 0x1 #define SPRN_DAWR 0xB4 -#define SPRN_MPPR 0xB8 /* Micro Partition Prefetch Register */ #define SPRN_RPR 0xBA /* Relative Priority Register */ #define SPRN_CIABR 0xBB #define CIABR_PRIV 0x3 diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 59503ed98e5f..3f1472a78f39 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -303,7 +303,7 @@ int dma_set_coherent_mask(struct device *dev, u64 mask) dev->coherent_dma_mask = mask; return 0; } -EXPORT_SYMBOL_GPL(dma_set_coherent_mask); +EXPORT_SYMBOL(dma_set_coherent_mask); #define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16) diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 84bf934cf748..5a753fae8265 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -1043,6 +1043,9 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs) if (!capable(CAP_SYS_ADMIN)) return -EPERM; + if (!rtas.entry) + return -EINVAL; + if (copy_from_user(&args, uargs, 3 * sizeof(u32)) != 0) return -EFAULT; diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 228049786888..9c26c5a96ea2 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -36,7 +36,6 @@ #include <asm/reg.h> #include <asm/cputable.h> -#include <asm/cache.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> #include <asm/uaccess.h> @@ -75,12 +74,6 @@ static DECLARE_BITMAP(default_enabled_hcalls, MAX_HCALL_OPCODE/4 + 1); -#if defined(CONFIG_PPC_64K_PAGES) -#define MPP_BUFFER_ORDER 0 -#elif defined(CONFIG_PPC_4K_PAGES) -#define MPP_BUFFER_ORDER 3 -#endif - static int dynamic_mt_modes = 6; module_param(dynamic_mt_modes, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(dynamic_mt_modes, "Set of allowed dynamic micro-threading modes: 0 (= none), 2, 4, or 6 (= 2 or 4)"); @@ -1455,13 +1448,6 @@ static struct kvmppc_vcore *kvmppc_vcore_create(struct kvm *kvm, int core) vcore->kvm = kvm; INIT_LIST_HEAD(&vcore->preempt_list); - vcore->mpp_buffer_is_valid = false; - - if (cpu_has_feature(CPU_FTR_ARCH_207S)) - vcore->mpp_buffer = (void *)__get_free_pages( - GFP_KERNEL|__GFP_ZERO, - MPP_BUFFER_ORDER); - return vcore; } @@ -1894,33 +1880,6 @@ static int on_primary_thread(void) return 1; } -static void kvmppc_start_saving_l2_cache(struct kvmppc_vcore *vc) -{ - phys_addr_t phy_addr, mpp_addr; - - phy_addr = (phys_addr_t)virt_to_phys(vc->mpp_buffer); - mpp_addr = phy_addr & PPC_MPPE_ADDRESS_MASK; - - mtspr(SPRN_MPPR, mpp_addr | PPC_MPPR_FETCH_ABORT); - logmpp(mpp_addr | PPC_LOGMPP_LOG_L2); - - vc->mpp_buffer_is_valid = true; -} - -static void kvmppc_start_restoring_l2_cache(const struct kvmppc_vcore *vc) -{ - phys_addr_t phy_addr, mpp_addr; - - phy_addr = virt_to_phys(vc->mpp_buffer); - mpp_addr = phy_addr & PPC_MPPE_ADDRESS_MASK; - - /* We must abort any in-progress save operations to ensure - * the table is valid so that prefetch engine knows when to - * stop prefetching. */ - logmpp(mpp_addr | PPC_LOGMPP_LOG_ABORT); - mtspr(SPRN_MPPR, mpp_addr | PPC_MPPR_FETCH_WHOLE_TABLE); -} - /* * A list of virtual cores for each physical CPU. * These are vcores that could run but their runner VCPU tasks are @@ -2471,14 +2430,8 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc) srcu_idx = srcu_read_lock(&vc->kvm->srcu); - if (vc->mpp_buffer_is_valid) - kvmppc_start_restoring_l2_cache(vc); - __kvmppc_vcore_entry(); - if (vc->mpp_buffer) - kvmppc_start_saving_l2_cache(vc); - srcu_read_unlock(&vc->kvm->srcu, srcu_idx); spin_lock(&vc->lock); @@ -3073,14 +3026,8 @@ static void kvmppc_free_vcores(struct kvm *kvm) { long int i; - for (i = 0; i < KVM_MAX_VCORES; ++i) { - if (kvm->arch.vcores[i] && kvm->arch.vcores[i]->mpp_buffer) { - struct kvmppc_vcore *vc = kvm->arch.vcores[i]; - free_pages((unsigned long)vc->mpp_buffer, - MPP_BUFFER_ORDER); - } + for (i = 0; i < KVM_MAX_VCORES; ++i) kfree(kvm->arch.vcores[i]); - } kvm->arch.online_vcores = 0; } diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index 13befa35d8a8..c8822af10a58 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -582,13 +582,21 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot, * be when they isi), and we are the only one left. We rely on our kernel * mapping being 0xC0's and the hardware ignoring those two real bits. * + * This must be called with interrupts disabled. + * + * Taking the native_tlbie_lock is unsafe here due to the possibility of + * lockdep being on. On pre POWER5 hardware, not taking the lock could + * cause deadlock. POWER5 and newer not taking the lock is fine. This only + * gets called during boot before secondary CPUs have come up and during + * crashdump and all bets are off anyway. + * * TODO: add batching support when enabled. remember, no dynamic memory here, * athough there is the control page available... */ static void native_hpte_clear(void) { unsigned long vpn = 0; - unsigned long slot, slots, flags; + unsigned long slot, slots; struct hash_pte *hptep = htab_address; unsigned long hpte_v; unsigned long pteg_count; @@ -596,13 +604,6 @@ static void native_hpte_clear(void) pteg_count = htab_hash_mask + 1; - local_irq_save(flags); - - /* we take the tlbie lock and hold it. Some hardware will - * deadlock if we try to tlbie from two processors at once. - */ - raw_spin_lock(&native_tlbie_lock); - slots = pteg_count * HPTES_PER_GROUP; for (slot = 0; slot < slots; slot++, hptep++) { @@ -614,8 +615,8 @@ static void native_hpte_clear(void) hpte_v = be64_to_cpu(hptep->v); /* - * Call __tlbie() here rather than tlbie() since we - * already hold the native_tlbie_lock. + * Call __tlbie() here rather than tlbie() since we can't take the + * native_tlbie_lock. */ if (hpte_v & HPTE_V_VALID) { hpte_decode(hptep, slot, &psize, &apsize, &ssize, &vpn); @@ -625,8 +626,6 @@ static void native_hpte_clear(void) } asm volatile("eieio; tlbsync; ptesync":::"memory"); - raw_spin_unlock(&native_tlbie_lock); - local_irq_restore(flags); } /* diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 230f3a7cdea4..4296d55e88f3 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -487,9 +487,12 @@ int opal_machine_check(struct pt_regs *regs) * PRD component would have already got notified about this * error through other channels. * - * In any case, let us just fall through. We anyway heading - * down to panic path. + * If hardware marked this as an unrecoverable MCE, we are + * going to panic anyway. Even if it didn't, it's not safe to + * continue at this point, so we should explicitly panic. */ + + panic("PowerNV Unrecovered Machine Check"); return 0; } diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index 8f70ba681a78..ca264833ee64 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -171,7 +171,26 @@ static void pnv_smp_cpu_kill_self(void) * so clear LPCR:PECE1. We keep PECE2 enabled. */ mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1); + + /* + * Hard-disable interrupts, and then clear irq_happened flags + * that we can safely ignore while off-line, since they + * are for things for which we do no processing when off-line + * (or in the case of HMI, all the processing we need to do + * is done in lower-level real-mode code). + */ + hard_irq_disable(); + local_paca->irq_happened &= ~(PACA_IRQ_DEC | PACA_IRQ_HMI); + while (!generic_check_cpu_restart(cpu)) { + /* + * Clear IPI flag, since we don't handle IPIs while + * offline, except for those when changing micro-threading + * mode, which are handled explicitly below, and those + * for coming online, which are handled via + * generic_check_cpu_restart() calls. + */ + kvmppc_set_host_ipi(cpu, 0); ppc64_runlatch_off(); @@ -196,20 +215,20 @@ static void pnv_smp_cpu_kill_self(void) * having finished executing in a KVM guest, then srr1 * contains 0. */ - if ((srr1 & wmask) == SRR1_WAKEEE) { + if (((srr1 & wmask) == SRR1_WAKEEE) || + (local_paca->irq_happened & PACA_IRQ_EE)) { icp_native_flush_interrupt(); - local_paca->irq_happened &= PACA_IRQ_HARD_DIS; - smp_mb(); } else if ((srr1 & wmask) == SRR1_WAKEHDBELL) { unsigned long msg = PPC_DBELL_TYPE(PPC_DBELL_SERVER); asm volatile(PPC_MSGCLR(%0) : : "r" (msg)); - kvmppc_set_host_ipi(cpu, 0); } + local_paca->irq_happened &= ~(PACA_IRQ_EE | PACA_IRQ_DBELL); + smp_mb(); if (cpu_core_split_required()) continue; - if (!generic_check_cpu_restart(cpu)) + if (srr1 && !generic_check_cpu_restart(cpu)) DBG("CPU%d Unexpected exit while offline !\n", cpu); } mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1); diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c index 09787139834d..3db53e8aff92 100644 --- a/arch/powerpc/platforms/ps3/os-area.c +++ b/arch/powerpc/platforms/ps3/os-area.c @@ -194,11 +194,6 @@ static const struct os_area_db_id os_area_db_id_rtc_diff = { .key = OS_AREA_DB_KEY_RTC_DIFF }; -static const struct os_area_db_id os_area_db_id_video_mode = { - .owner = OS_AREA_DB_OWNER_LINUX, - .key = OS_AREA_DB_KEY_VIDEO_MODE -}; - #define SECONDS_FROM_1970_TO_2000 946684800LL /** diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h index fe20d14ae051..ceb5201a30ed 100644 --- a/arch/sh/include/asm/page.h +++ b/arch/sh/include/asm/page.h @@ -59,6 +59,7 @@ pages_do_alias(unsigned long addr1, unsigned long addr2) #define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) extern void copy_page(void *to, void *from); +#define copy_user_page(to, from, vaddr, pg) __copy_user(to, from, PAGE_SIZE) struct page; struct vm_area_struct; diff --git a/arch/sparc/crypto/aes_glue.c b/arch/sparc/crypto/aes_glue.c index 2e48eb8813ff..c90930de76ba 100644 --- a/arch/sparc/crypto/aes_glue.c +++ b/arch/sparc/crypto/aes_glue.c @@ -433,6 +433,7 @@ static struct crypto_alg algs[] = { { .blkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, .setkey = aes_set_key, .encrypt = cbc_encrypt, .decrypt = cbc_decrypt, @@ -452,6 +453,7 @@ static struct crypto_alg algs[] = { { .blkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, .setkey = aes_set_key, .encrypt = ctr_crypt, .decrypt = ctr_crypt, diff --git a/arch/sparc/crypto/camellia_glue.c b/arch/sparc/crypto/camellia_glue.c index 6bf2479a12fb..561a84d93cf6 100644 --- a/arch/sparc/crypto/camellia_glue.c +++ b/arch/sparc/crypto/camellia_glue.c @@ -274,6 +274,7 @@ static struct crypto_alg algs[] = { { .blkcipher = { .min_keysize = CAMELLIA_MIN_KEY_SIZE, .max_keysize = CAMELLIA_MAX_KEY_SIZE, + .ivsize = CAMELLIA_BLOCK_SIZE, .setkey = camellia_set_key, .encrypt = cbc_encrypt, .decrypt = cbc_decrypt, diff --git a/arch/sparc/crypto/des_glue.c b/arch/sparc/crypto/des_glue.c index dd6a34fa6e19..61af794aa2d3 100644 --- a/arch/sparc/crypto/des_glue.c +++ b/arch/sparc/crypto/des_glue.c @@ -429,6 +429,7 @@ static struct crypto_alg algs[] = { { .blkcipher = { .min_keysize = DES_KEY_SIZE, .max_keysize = DES_KEY_SIZE, + .ivsize = DES_BLOCK_SIZE, .setkey = des_set_key, .encrypt = cbc_encrypt, .decrypt = cbc_decrypt, @@ -485,6 +486,7 @@ static struct crypto_alg algs[] = { { .blkcipher = { .min_keysize = DES3_EDE_KEY_SIZE, .max_keysize = DES3_EDE_KEY_SIZE, + .ivsize = DES3_EDE_BLOCK_SIZE, .setkey = des3_ede_set_key, .encrypt = cbc3_encrypt, .decrypt = cbc3_decrypt, diff --git a/arch/um/Makefile b/arch/um/Makefile index 098ab3333e7c..e3abe6f3156d 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -70,8 +70,8 @@ KBUILD_AFLAGS += $(ARCH_INCLUDE) USER_CFLAGS = $(patsubst $(KERNEL_DEFINES),,$(patsubst -I%,,$(KBUILD_CFLAGS))) \ $(ARCH_INCLUDE) $(MODE_INCLUDE) $(filter -I%,$(CFLAGS)) \ - -D_FILE_OFFSET_BITS=64 -idirafter include \ - -D__KERNEL__ -D__UM_HOST__ + -D_FILE_OFFSET_BITS=64 -idirafter $(srctree)/include \ + -idirafter $(obj)/include -D__KERNEL__ -D__UM_HOST__ #This will adjust *FLAGS accordingly to the platform. include $(ARCH_DIR)/Makefile-os-$(OS) diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c index d8a9fce6ee2e..98783dd0fa2e 100644 --- a/arch/um/kernel/trap.c +++ b/arch/um/kernel/trap.c @@ -220,7 +220,7 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, show_regs(container_of(regs, struct pt_regs, regs)); panic("Segfault with no mm"); } - else if (!is_user && address < TASK_SIZE) { + else if (!is_user && address > PAGE_SIZE && address < TASK_SIZE) { show_regs(container_of(regs, struct pt_regs, regs)); panic("Kernel tried to access user memory at addr 0x%lx, ip 0x%lx", address, ip); diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c index e3ee4a51ef63..3f02d4232812 100644 --- a/arch/um/os-Linux/helper.c +++ b/arch/um/os-Linux/helper.c @@ -96,7 +96,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv) "ret = %d\n", -n); ret = n; } - CATCH_EINTR(waitpid(pid, NULL, __WCLONE)); + CATCH_EINTR(waitpid(pid, NULL, __WALL)); } out_free2: @@ -129,7 +129,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, return err; } if (stack_out == NULL) { - CATCH_EINTR(pid = waitpid(pid, &status, __WCLONE)); + CATCH_EINTR(pid = waitpid(pid, &status, __WALL)); if (pid < 0) { err = -errno; printk(UM_KERN_ERR "run_helper_thread - wait failed, " @@ -148,7 +148,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, int helper_wait(int pid) { int ret, status; - int wflags = __WCLONE; + int wflags = __WALL; CATCH_EINTR(ret = waitpid(pid, &status, wflags)); if (ret < 0) { diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index ee1b6d346b98..db51c1f27446 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -667,6 +667,7 @@ setup_gop32(struct screen_info *si, efi_guid_t *proto, bool conout_found = false; void *dummy = NULL; u32 h = handles[i]; + u32 current_fb_base; status = efi_call_early(handle_protocol, h, proto, (void **)&gop32); @@ -678,7 +679,7 @@ setup_gop32(struct screen_info *si, efi_guid_t *proto, if (status == EFI_SUCCESS) conout_found = true; - status = __gop_query32(gop32, &info, &size, &fb_base); + status = __gop_query32(gop32, &info, &size, ¤t_fb_base); if (status == EFI_SUCCESS && (!first_gop || conout_found)) { /* * Systems that use the UEFI Console Splitter may @@ -692,6 +693,7 @@ setup_gop32(struct screen_info *si, efi_guid_t *proto, pixel_format = info->pixel_format; pixel_info = info->pixel_information; pixels_per_scan_line = info->pixels_per_scan_line; + fb_base = current_fb_base; /* * Once we've found a GOP supporting ConOut, @@ -770,6 +772,7 @@ setup_gop64(struct screen_info *si, efi_guid_t *proto, bool conout_found = false; void *dummy = NULL; u64 h = handles[i]; + u32 current_fb_base; status = efi_call_early(handle_protocol, h, proto, (void **)&gop64); @@ -781,7 +784,7 @@ setup_gop64(struct screen_info *si, efi_guid_t *proto, if (status == EFI_SUCCESS) conout_found = true; - status = __gop_query64(gop64, &info, &size, &fb_base); + status = __gop_query64(gop64, &info, &size, ¤t_fb_base); if (status == EFI_SUCCESS && (!first_gop || conout_found)) { /* * Systems that use the UEFI Console Splitter may @@ -795,6 +798,7 @@ setup_gop64(struct screen_info *si, efi_guid_t *proto, pixel_format = info->pixel_format; pixel_info = info->pixel_information; pixels_per_scan_line = info->pixels_per_scan_line; + fb_base = current_fb_base; /* * Once we've found a GOP supporting ConOut, diff --git a/arch/x86/crypto/camellia_aesni_avx_glue.c b/arch/x86/crypto/camellia_aesni_avx_glue.c index 80a0e4389c9a..bacaa13acac5 100644 --- a/arch/x86/crypto/camellia_aesni_avx_glue.c +++ b/arch/x86/crypto/camellia_aesni_avx_glue.c @@ -554,6 +554,11 @@ static int __init camellia_aesni_init(void) { const char *feature_name; + if (!cpu_has_avx || !cpu_has_aes || !cpu_has_osxsave) { + pr_info("AVX or AES-NI instructions are not detected.\n"); + return -ENODEV; + } + if (!cpu_has_xfeatures(XSTATE_SSE | XSTATE_YMM, &feature_name)) { pr_info("CPU feature '%s' is not supported.\n", feature_name); return -ENODEV; diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h index 5fa9fb0f8809..cc285ec4b2c1 100644 --- a/arch/x86/include/asm/hpet.h +++ b/arch/x86/include/asm/hpet.h @@ -63,10 +63,10 @@ /* hpet memory map physical address */ extern unsigned long hpet_address; extern unsigned long force_hpet_address; -extern int boot_hpet_disable; +extern bool boot_hpet_disable; extern u8 hpet_blockid; -extern int hpet_force_user; -extern u8 hpet_msi_disable; +extern bool hpet_force_user; +extern bool hpet_msi_disable; extern int is_hpet_enabled(void); extern int hpet_enable(void); extern void hpet_disable(void); diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 2beee0382088..3a36ee704c30 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -1226,10 +1226,8 @@ void kvm_complete_insn_gp(struct kvm_vcpu *vcpu, int err); int kvm_is_in_guest(void); -int __x86_set_memory_region(struct kvm *kvm, - const struct kvm_userspace_memory_region *mem); -int x86_set_memory_region(struct kvm *kvm, - const struct kvm_userspace_memory_region *mem); +int __x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa, u32 size); +int x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa, u32 size); bool kvm_vcpu_is_reset_bsp(struct kvm_vcpu *vcpu); bool kvm_vcpu_is_bsp(struct kvm_vcpu *vcpu); diff --git a/arch/x86/include/asm/string_64.h b/arch/x86/include/asm/string_64.h index e4661196994e..ff8b9a17dc4b 100644 --- a/arch/x86/include/asm/string_64.h +++ b/arch/x86/include/asm/string_64.h @@ -27,12 +27,11 @@ static __always_inline void *__inline_memcpy(void *to, const void *from, size_t function. */ #define __HAVE_ARCH_MEMCPY 1 +extern void *memcpy(void *to, const void *from, size_t len); extern void *__memcpy(void *to, const void *from, size_t len); #ifndef CONFIG_KMEMCHECK -#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4 -extern void *memcpy(void *to, const void *from, size_t len); -#else +#if (__GNUC__ == 4 && __GNUC_MINOR__ < 3) || __GNUC__ < 4 #define memcpy(dst, src, len) \ ({ \ size_t __len = (len); \ diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 5c60bb162622..4f2821527014 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2547,7 +2547,9 @@ void __init setup_ioapic_dest(void) mask = apic->target_cpus(); chip = irq_data_get_irq_chip(idata); - chip->irq_set_affinity(idata, mask, false); + /* Might be lapic_chip for irq 0 */ + if (chip->irq_set_affinity) + chip->irq_set_affinity(idata, mask, false); } } #endif @@ -2907,6 +2909,7 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, struct irq_data *irq_data; struct mp_chip_data *data; struct irq_alloc_info *info = arg; + unsigned long flags; if (!info || nr_irqs > 1) return -EINVAL; @@ -2939,11 +2942,14 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, cfg = irqd_cfg(irq_data); add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin); + + local_irq_save(flags); if (info->ioapic_entry) mp_setup_entry(cfg, data, info->ioapic_entry); mp_register_handler(virq, data->trigger); if (virq < nr_legacy_irqs()) legacy_pic->mask(virq); + local_irq_restore(flags); apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i Dest:%d)\n", diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 9f9cc682e561..db9a675e751b 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -584,7 +584,7 @@ static void __init intel_graphics_stolen(int num, int slot, int func) static void __init force_disable_hpet(int num, int slot, int func) { #ifdef CONFIG_HPET_TIMER - boot_hpet_disable = 1; + boot_hpet_disable = true; pr_info("x86/hpet: Will disable the HPET for this platform because it's not reliable\n"); #endif } diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 88b4da373081..b8e6ff5cd5d0 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -37,10 +37,10 @@ */ unsigned long hpet_address; u8 hpet_blockid; /* OS timer block num */ -u8 hpet_msi_disable; +bool hpet_msi_disable; #ifdef CONFIG_PCI_MSI -static unsigned long hpet_num_timers; +static unsigned int hpet_num_timers; #endif static void __iomem *hpet_virt_address; @@ -86,9 +86,9 @@ static inline void hpet_clear_mapping(void) /* * HPET command line enable / disable */ -int boot_hpet_disable; -int hpet_force_user; -static int hpet_verbose; +bool boot_hpet_disable; +bool hpet_force_user; +static bool hpet_verbose; static int __init hpet_setup(char *str) { @@ -98,11 +98,11 @@ static int __init hpet_setup(char *str) if (next) *next++ = 0; if (!strncmp("disable", str, 7)) - boot_hpet_disable = 1; + boot_hpet_disable = true; if (!strncmp("force", str, 5)) - hpet_force_user = 1; + hpet_force_user = true; if (!strncmp("verbose", str, 7)) - hpet_verbose = 1; + hpet_verbose = true; str = next; } return 1; @@ -111,7 +111,7 @@ __setup("hpet=", hpet_setup); static int __init disable_hpet(char *str) { - boot_hpet_disable = 1; + boot_hpet_disable = true; return 1; } __setup("nohpet", disable_hpet); @@ -124,7 +124,7 @@ static inline int is_hpet_capable(void) /* * HPET timer interrupt enable / disable */ -static int hpet_legacy_int_enabled; +static bool hpet_legacy_int_enabled; /** * is_hpet_enabled - check whether the hpet timer interrupt is enabled @@ -230,7 +230,7 @@ static struct clock_event_device hpet_clockevent; static void hpet_stop_counter(void) { - unsigned long cfg = hpet_readl(HPET_CFG); + u32 cfg = hpet_readl(HPET_CFG); cfg &= ~HPET_CFG_ENABLE; hpet_writel(cfg, HPET_CFG); } @@ -272,7 +272,7 @@ static void hpet_enable_legacy_int(void) cfg |= HPET_CFG_LEGACY; hpet_writel(cfg, HPET_CFG); - hpet_legacy_int_enabled = 1; + hpet_legacy_int_enabled = true; } static void hpet_legacy_clockevent_register(void) @@ -983,7 +983,7 @@ void hpet_disable(void) cfg = *hpet_boot_cfg; else if (hpet_legacy_int_enabled) { cfg &= ~HPET_CFG_LEGACY; - hpet_legacy_int_enabled = 0; + hpet_legacy_int_enabled = false; } cfg &= ~HPET_CFG_ENABLE; hpet_writel(cfg, HPET_CFG); @@ -1121,8 +1121,7 @@ EXPORT_SYMBOL_GPL(hpet_rtc_timer_init); static void hpet_disable_rtc_channel(void) { - unsigned long cfg; - cfg = hpet_readl(HPET_T1_CFG); + u32 cfg = hpet_readl(HPET_T1_CFG); cfg &= ~HPET_TN_ENABLE; hpet_writel(cfg, HPET_T1_CFG); } diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 1b55de1267cf..cd99433b8ba1 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -131,11 +131,12 @@ void dma_generic_free_coherent(struct device *dev, size_t size, void *vaddr, bool arch_dma_alloc_attrs(struct device **dev, gfp_t *gfp) { + if (!*dev) + *dev = &x86_dma_fallback_dev; + *gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32); *gfp = dma_alloc_coherent_gfp_flags(*dev, *gfp); - if (!*dev) - *dev = &x86_dma_fallback_dev; if (!is_device_dma_capable(*dev)) return false; return true; diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 39e585a554b7..9f7c21c22477 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -84,6 +84,9 @@ EXPORT_SYMBOL_GPL(idle_notifier_unregister); int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) { memcpy(dst, src, arch_task_struct_size); +#ifdef CONFIG_VM86 + dst->thread.vm86 = NULL; +#endif return fpu__copy(&dst->thread.fpu, &src->thread.fpu); } @@ -550,14 +553,14 @@ unsigned long get_wchan(struct task_struct *p) if (sp < bottom || sp > top) return 0; - fp = READ_ONCE(*(unsigned long *)sp); + fp = READ_ONCE_NOCHECK(*(unsigned long *)sp); do { if (fp < bottom || fp > top) return 0; - ip = READ_ONCE(*(unsigned long *)(fp + sizeof(unsigned long))); + ip = READ_ONCE_NOCHECK(*(unsigned long *)(fp + sizeof(unsigned long))); if (!in_sched_functions(ip)) return ip; - fp = READ_ONCE(*(unsigned long *)fp); + fp = READ_ONCE_NOCHECK(*(unsigned long *)fp); } while (count++ < 16 && p->state != TASK_RUNNING); return 0; } diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 176a0f99d4da..cc457ff818ad 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -524,7 +524,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E6XX_CU, */ static void force_disable_hpet_msi(struct pci_dev *unused) { - hpet_msi_disable = 1; + hpet_msi_disable = true; } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index fdb7f2a2d328..a3cccbfc5f77 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1173,6 +1173,14 @@ void __init setup_arch(char **cmdline_p) clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY, swapper_pg_dir + KERNEL_PGD_BOUNDARY, KERNEL_PGD_PTRS); + + /* + * sync back low identity map too. It is used for example + * in the 32-bit EFI stub. + */ + clone_pgd_range(initial_page_table, + swapper_pg_dir + KERNEL_PGD_BOUNDARY, + KERNEL_PGD_PTRS); #endif tboot_probe(); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index e0c198e5f920..892ee2e5ecbc 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -509,7 +509,7 @@ void __inquire_remote_apic(int apicid) */ #define UDELAY_10MS_DEFAULT 10000 -static unsigned int init_udelay = UDELAY_10MS_DEFAULT; +static unsigned int init_udelay = INT_MAX; static int __init cpu_init_udelay(char *str) { @@ -522,13 +522,16 @@ early_param("cpu_init_udelay", cpu_init_udelay); static void __init smp_quirk_init_udelay(void) { /* if cmdline changed it from default, leave it alone */ - if (init_udelay != UDELAY_10MS_DEFAULT) + if (init_udelay != INT_MAX) return; /* if modern processor, use no delay */ if (((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 6)) || ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && (boot_cpu_data.x86 >= 0xF))) init_udelay = 0; + + /* else, use legacy delay */ + init_udelay = UDELAY_10MS_DEFAULT; } /* @@ -657,7 +660,9 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip) /* * Give the other CPU some time to accept the IPI. */ - if (init_udelay) + if (init_udelay == 0) + udelay(10); + else udelay(300); pr_debug("Startup point 1\n"); @@ -668,7 +673,9 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip) /* * Give the other CPU some time to accept the IPI. */ - if (init_udelay) + if (init_udelay == 0) + udelay(10); + else udelay(200); if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index b372a7557c16..9da95b9daf8d 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -2418,7 +2418,7 @@ static int rsm_load_state_64(struct x86_emulate_ctxt *ctxt, u64 smbase) u64 val, cr0, cr4; u32 base3; u16 selector; - int i; + int i, r; for (i = 0; i < 16; i++) *reg_write(ctxt, i) = GET_SMSTATE(u64, smbase, 0x7ff8 - i * 8); @@ -2460,13 +2460,17 @@ static int rsm_load_state_64(struct x86_emulate_ctxt *ctxt, u64 smbase) dt.address = GET_SMSTATE(u64, smbase, 0x7e68); ctxt->ops->set_gdt(ctxt, &dt); + r = rsm_enter_protected_mode(ctxt, cr0, cr4); + if (r != X86EMUL_CONTINUE) + return r; + for (i = 0; i < 6; i++) { - int r = rsm_load_seg_64(ctxt, smbase, i); + r = rsm_load_seg_64(ctxt, smbase, i); if (r != X86EMUL_CONTINUE) return r; } - return rsm_enter_protected_mode(ctxt, cr0, cr4); + return X86EMUL_CONTINUE; } static int em_rsm(struct x86_emulate_ctxt *ctxt) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 06ef4908ba61..6a8bc64566ab 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -4105,17 +4105,13 @@ static void seg_setup(int seg) static int alloc_apic_access_page(struct kvm *kvm) { struct page *page; - struct kvm_userspace_memory_region kvm_userspace_mem; int r = 0; mutex_lock(&kvm->slots_lock); if (kvm->arch.apic_access_page_done) goto out; - kvm_userspace_mem.slot = APIC_ACCESS_PAGE_PRIVATE_MEMSLOT; - kvm_userspace_mem.flags = 0; - kvm_userspace_mem.guest_phys_addr = APIC_DEFAULT_PHYS_BASE; - kvm_userspace_mem.memory_size = PAGE_SIZE; - r = __x86_set_memory_region(kvm, &kvm_userspace_mem); + r = __x86_set_memory_region(kvm, APIC_ACCESS_PAGE_PRIVATE_MEMSLOT, + APIC_DEFAULT_PHYS_BASE, PAGE_SIZE); if (r) goto out; @@ -4140,17 +4136,12 @@ static int alloc_identity_pagetable(struct kvm *kvm) { /* Called with kvm->slots_lock held. */ - struct kvm_userspace_memory_region kvm_userspace_mem; int r = 0; BUG_ON(kvm->arch.ept_identity_pagetable_done); - kvm_userspace_mem.slot = IDENTITY_PAGETABLE_PRIVATE_MEMSLOT; - kvm_userspace_mem.flags = 0; - kvm_userspace_mem.guest_phys_addr = - kvm->arch.ept_identity_map_addr; - kvm_userspace_mem.memory_size = PAGE_SIZE; - r = __x86_set_memory_region(kvm, &kvm_userspace_mem); + r = __x86_set_memory_region(kvm, IDENTITY_PAGETABLE_PRIVATE_MEMSLOT, + kvm->arch.ept_identity_map_addr, PAGE_SIZE); return r; } @@ -4949,14 +4940,9 @@ static int vmx_interrupt_allowed(struct kvm_vcpu *vcpu) static int vmx_set_tss_addr(struct kvm *kvm, unsigned int addr) { int ret; - struct kvm_userspace_memory_region tss_mem = { - .slot = TSS_PRIVATE_MEMSLOT, - .guest_phys_addr = addr, - .memory_size = PAGE_SIZE * 3, - .flags = 0, - }; - ret = x86_set_memory_region(kvm, &tss_mem); + ret = x86_set_memory_region(kvm, TSS_PRIVATE_MEMSLOT, addr, + PAGE_SIZE * 3); if (ret) return ret; kvm->arch.tss_addr = addr; diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 92511d4b7236..9a9a19830321 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6453,6 +6453,12 @@ static inline int vcpu_block(struct kvm *kvm, struct kvm_vcpu *vcpu) return 1; } +static inline bool kvm_vcpu_running(struct kvm_vcpu *vcpu) +{ + return (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE && + !vcpu->arch.apf.halted); +} + static int vcpu_run(struct kvm_vcpu *vcpu) { int r; @@ -6461,8 +6467,7 @@ static int vcpu_run(struct kvm_vcpu *vcpu) vcpu->srcu_idx = srcu_read_lock(&kvm->srcu); for (;;) { - if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE && - !vcpu->arch.apf.halted) + if (kvm_vcpu_running(vcpu)) r = vcpu_enter_guest(vcpu); else r = vcpu_block(kvm, vcpu); @@ -7474,34 +7479,66 @@ void kvm_arch_sync_events(struct kvm *kvm) kvm_free_pit(kvm); } -int __x86_set_memory_region(struct kvm *kvm, - const struct kvm_userspace_memory_region *mem) +int __x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa, u32 size) { int i, r; + unsigned long hva; + struct kvm_memslots *slots = kvm_memslots(kvm); + struct kvm_memory_slot *slot, old; /* Called with kvm->slots_lock held. */ - BUG_ON(mem->slot >= KVM_MEM_SLOTS_NUM); + if (WARN_ON(id >= KVM_MEM_SLOTS_NUM)) + return -EINVAL; + + slot = id_to_memslot(slots, id); + if (size) { + if (WARN_ON(slot->npages)) + return -EEXIST; + + /* + * MAP_SHARED to prevent internal slot pages from being moved + * by fork()/COW. + */ + hva = vm_mmap(NULL, 0, size, PROT_READ | PROT_WRITE, + MAP_SHARED | MAP_ANONYMOUS, 0); + if (IS_ERR((void *)hva)) + return PTR_ERR((void *)hva); + } else { + if (!slot->npages) + return 0; + hva = 0; + } + + old = *slot; for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) { - struct kvm_userspace_memory_region m = *mem; + struct kvm_userspace_memory_region m; - m.slot |= i << 16; + m.slot = id | (i << 16); + m.flags = 0; + m.guest_phys_addr = gpa; + m.userspace_addr = hva; + m.memory_size = size; r = __kvm_set_memory_region(kvm, &m); if (r < 0) return r; } + if (!size) { + r = vm_munmap(old.userspace_addr, old.npages * PAGE_SIZE); + WARN_ON(r < 0); + } + return 0; } EXPORT_SYMBOL_GPL(__x86_set_memory_region); -int x86_set_memory_region(struct kvm *kvm, - const struct kvm_userspace_memory_region *mem) +int x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa, u32 size) { int r; mutex_lock(&kvm->slots_lock); - r = __x86_set_memory_region(kvm, mem); + r = __x86_set_memory_region(kvm, id, gpa, size); mutex_unlock(&kvm->slots_lock); return r; @@ -7516,16 +7553,9 @@ void kvm_arch_destroy_vm(struct kvm *kvm) * unless the the memory map has changed due to process exit * or fd copying. */ - struct kvm_userspace_memory_region mem; - memset(&mem, 0, sizeof(mem)); - mem.slot = APIC_ACCESS_PAGE_PRIVATE_MEMSLOT; - x86_set_memory_region(kvm, &mem); - - mem.slot = IDENTITY_PAGETABLE_PRIVATE_MEMSLOT; - x86_set_memory_region(kvm, &mem); - - mem.slot = TSS_PRIVATE_MEMSLOT; - x86_set_memory_region(kvm, &mem); + x86_set_memory_region(kvm, APIC_ACCESS_PAGE_PRIVATE_MEMSLOT, 0, 0); + x86_set_memory_region(kvm, IDENTITY_PAGETABLE_PRIVATE_MEMSLOT, 0, 0); + x86_set_memory_region(kvm, TSS_PRIVATE_MEMSLOT, 0, 0); } kvm_iommu_unmap_guest(kvm); kfree(kvm->arch.vpic); @@ -7628,27 +7658,6 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm, const struct kvm_userspace_memory_region *mem, enum kvm_mr_change change) { - /* - * Only private memory slots need to be mapped here since - * KVM_SET_MEMORY_REGION ioctl is no longer supported. - */ - if ((memslot->id >= KVM_USER_MEM_SLOTS) && (change == KVM_MR_CREATE)) { - unsigned long userspace_addr; - - /* - * MAP_SHARED to prevent internal slot pages from being moved - * by fork()/COW. - */ - userspace_addr = vm_mmap(NULL, 0, memslot->npages * PAGE_SIZE, - PROT_READ | PROT_WRITE, - MAP_SHARED | MAP_ANONYMOUS, 0); - - if (IS_ERR((void *)userspace_addr)) - return PTR_ERR((void *)userspace_addr); - - memslot->userspace_addr = userspace_addr; - } - return 0; } @@ -7710,17 +7719,6 @@ void kvm_arch_commit_memory_region(struct kvm *kvm, { int nr_mmu_pages = 0; - if (change == KVM_MR_DELETE && old->id >= KVM_USER_MEM_SLOTS) { - int ret; - - ret = vm_munmap(old->userspace_addr, - old->npages * PAGE_SIZE); - if (ret < 0) - printk(KERN_WARNING - "kvm_vm_ioctl_set_memory_region: " - "failed to munmap memory\n"); - } - if (!kvm->arch.n_requested_mmu_pages) nr_mmu_pages = kvm_mmu_calculate_mmu_pages(kvm); @@ -7769,19 +7767,36 @@ void kvm_arch_flush_shadow_memslot(struct kvm *kvm, kvm_mmu_invalidate_zap_all_pages(kvm); } +static inline bool kvm_vcpu_has_events(struct kvm_vcpu *vcpu) +{ + if (!list_empty_careful(&vcpu->async_pf.done)) + return true; + + if (kvm_apic_has_events(vcpu)) + return true; + + if (vcpu->arch.pv.pv_unhalted) + return true; + + if (atomic_read(&vcpu->arch.nmi_queued)) + return true; + + if (test_bit(KVM_REQ_SMI, &vcpu->requests)) + return true; + + if (kvm_arch_interrupt_allowed(vcpu) && + kvm_cpu_has_interrupt(vcpu)) + return true; + + return false; +} + int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu) { if (is_guest_mode(vcpu) && kvm_x86_ops->check_nested_events) kvm_x86_ops->check_nested_events(vcpu, false); - return (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE && - !vcpu->arch.apf.halted) - || !list_empty_careful(&vcpu->async_pf.done) - || kvm_apic_has_events(vcpu) - || vcpu->arch.pv.pv_unhalted - || atomic_read(&vcpu->arch.nmi_queued) || - (kvm_arch_interrupt_allowed(vcpu) && - kvm_cpu_has_interrupt(vcpu)); + return kvm_vcpu_running(vcpu) || kvm_vcpu_has_events(vcpu); } int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu) diff --git a/arch/x86/um/ldt.c b/arch/x86/um/ldt.c index 9701a4fd7bf2..836a1eb5df43 100644 --- a/arch/x86/um/ldt.c +++ b/arch/x86/um/ldt.c @@ -12,7 +12,10 @@ #include <skas.h> #include <sysdep/tls.h> -extern int modify_ldt(int func, void *ptr, unsigned long bytecount); +static inline int modify_ldt (int func, void *ptr, unsigned long bytecount) +{ + return syscall(__NR_modify_ldt, func, ptr, bytecount); +} static long write_ldt_entry(struct mm_id *mm_idp, int func, struct user_desc *desc, void **addr, int done) |