summaryrefslogtreecommitdiff
path: root/drivers/cdrom
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/cdrom')
-rw-r--r--drivers/cdrom/Kconfig213
-rw-r--r--drivers/cdrom/Makefile10
-rw-r--r--drivers/cdrom/aztcd.c2492
-rw-r--r--drivers/cdrom/aztcd.h162
-rw-r--r--drivers/cdrom/cdu31a.c3251
-rw-r--r--drivers/cdrom/cdu31a.h411
-rw-r--r--drivers/cdrom/cm206.c1594
-rw-r--r--drivers/cdrom/cm206.h171
-rw-r--r--drivers/cdrom/gscd.c1029
-rw-r--r--drivers/cdrom/gscd.h108
-rw-r--r--drivers/cdrom/isp16.c374
-rw-r--r--drivers/cdrom/isp16.h72
-rw-r--r--drivers/cdrom/mcdx.c1943
-rw-r--r--drivers/cdrom/mcdx.h185
-rw-r--r--drivers/cdrom/optcd.c2105
-rw-r--r--drivers/cdrom/optcd.h52
-rw-r--r--drivers/cdrom/sbpcd.c5966
-rw-r--r--drivers/cdrom/sbpcd.h839
-rw-r--r--drivers/cdrom/sjcd.c1815
-rw-r--r--drivers/cdrom/sjcd.h181
-rw-r--r--drivers/cdrom/sonycd535.c1689
-rw-r--r--drivers/cdrom/sonycd535.h183
22 files changed, 0 insertions, 24845 deletions
diff --git a/drivers/cdrom/Kconfig b/drivers/cdrom/Kconfig
deleted file mode 100644
index 4b12e9031fb3..000000000000
--- a/drivers/cdrom/Kconfig
+++ /dev/null
@@ -1,213 +0,0 @@
-#
-# CDROM driver configuration
-#
-
-menu "Old CD-ROM drivers (not SCSI, not IDE)"
- depends on ISA && BLOCK
-
-config CD_NO_IDESCSI
- bool "Support non-SCSI/IDE/ATAPI CDROM drives"
- ---help---
- If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
- here, otherwise N. Read the CD-ROM-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about these CD-ROM drives. If you are unsure what you
- have, say Y and find out whether you have one of the following
- drives.
-
- For each of these drivers, a <file:Documentation/cdrom/{driver_name}>
- exists. Especially in cases where you do not know exactly which kind
- of drive you have you should read there. Most of these drivers use a
- file drivers/cdrom/{driver_name}.h where you can define your
- interface parameters and switch some internal goodies.
-
- To compile these CD-ROM drivers as a module, choose M instead of Y.
-
- If you want to use any of these CD-ROM drivers, you also have to
- answer Y or M to "ISO 9660 CD-ROM file system support" below (this
- answer will get "defaulted" for you if you enable any of the Linux
- CD-ROM drivers).
-
-config AZTCD
- tristate "Aztech/Orchid/Okano/Wearnes/TXC/CyDROM CDROM support"
- depends on CD_NO_IDESCSI
- ---help---
- This is your driver if you have an Aztech CDA268-01A, Orchid
- CD-3110, Okano or Wearnes CDD110, Conrad TXC, or CyCD-ROM CR520 or
- CR540 CD-ROM drive. This driver -- just like all these CD-ROM
- drivers -- is NOT for CD-ROM drives with IDE/ATAPI interfaces, such
- as Aztech CDA269-031SE. Please read the file
- <file:Documentation/cdrom/aztcd>.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called aztcd.
-
-config GSCD
- tristate "Goldstar R420 CDROM support"
- depends on CD_NO_IDESCSI
- ---help---
- If this is your CD-ROM drive, say Y here. As described in the file
- <file:Documentation/cdrom/gscd>, you might have to change a setting
- in the file <file:drivers/cdrom/gscd.h> before compiling the
- kernel. Please read the file <file:Documentation/cdrom/gscd>.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called gscd.
-
-config SBPCD
- tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support"
- depends on CD_NO_IDESCSI && BROKEN_ON_SMP
- ---help---
- This driver supports most of the drives which use the Panasonic or
- Sound Blaster interface. Please read the file
- <file:Documentation/cdrom/sbpcd>.
-
- The Matsushita CR-521, CR-522, CR-523, CR-562, CR-563 drives
- (sometimes labeled "Creative"), the Creative Labs CD200, the
- Longshine LCS-7260, the "IBM External ISA CD-ROM" (in fact a CR-56x
- model), the TEAC CD-55A fall under this category. Some other
- "electrically compatible" drives (Vertos, Genoa, some Funai models)
- are currently not supported; for the Sanyo H94A drive currently a
- separate driver (asked later) is responsible. Most drives have a
- uniquely shaped faceplate, with a caddyless motorized drawer, but
- without external brand markings. The older CR-52x drives have a
- caddy and manual loading/eject, but still no external markings. The
- driver is able to do an extended auto-probing for interface
- addresses and drive types; this can help to find facts in cases you
- are not sure, but can consume some time during the boot process if
- none of the supported drives gets found. Once your drive got found,
- you should enter the reported parameters into
- <file:drivers/cdrom/sbpcd.h> and set "DISTRIBUTION 0" there.
-
- This driver can support up to four CD-ROM controller cards, and each
- card can support up to four CD-ROM drives; if you say Y here, you
- will be asked how many controller cards you have. If compiled as a
- module, only one controller card (but with up to four drives) is
- usable.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called sbpcd.
-
-config MCDX
- tristate "Mitsumi CDROM support"
- depends on CD_NO_IDESCSI
- ---help---
- Use this driver if you want to be able to use your Mitsumi LU-005,
- FX-001 or FX-001D CD-ROM drive.
-
- Please read the file <file:Documentation/cdrom/mcdx>.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called mcdx.
-
-config OPTCD
- tristate "Optics Storage DOLPHIN 8000AT CDROM support"
- depends on CD_NO_IDESCSI
- ---help---
- This is the driver for the 'DOLPHIN' drive with a 34-pin Sony
- compatible interface. It also works with the Lasermate CR328A. If
- you have one of those, say Y. This driver does not work for the
- Optics Storage 8001 drive; use the IDE-ATAPI CD-ROM driver for that
- one. Please read the file <file:Documentation/cdrom/optcd>.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called optcd.
-
-config CM206
- tristate "Philips/LMS CM206 CDROM support"
- depends on CD_NO_IDESCSI && BROKEN_ON_SMP
- ---help---
- If you have a Philips/LMS CD-ROM drive cm206 in combination with a
- cm260 host adapter card, say Y here. Please also read the file
- <file:Documentation/cdrom/cm206>.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called cm206.
-
-config SJCD
- tristate "Sanyo CDR-H94A CDROM support"
- depends on CD_NO_IDESCSI
- help
- If this is your CD-ROM drive, say Y here and read the file
- <file:Documentation/cdrom/sjcd>. You should then also say Y or M to
- "ISO 9660 CD-ROM file system support" below, because that's the
- file system used on CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called sjcd.
-
-config ISP16_CDI
- tristate "ISP16/MAD16/Mozart soft configurable cdrom interface support"
- depends on CD_NO_IDESCSI
- ---help---
- These are sound cards with built-in cdrom interfaces using the OPTi
- 82C928 or 82C929 chips. Say Y here to have them detected and
- possibly configured at boot time. In addition, You'll have to say Y
- to a driver for the particular cdrom drive you have attached to the
- card. Read <file:Documentation/cdrom/isp16> for details.
-
- To compile this driver as a module, choose M here: the
- module will be called isp16.
-
-config CDU31A
- tristate "Sony CDU31A/CDU33A CDROM support"
- depends on CD_NO_IDESCSI && BROKEN_ON_SMP
- ---help---
- These CD-ROM drives have a spring-pop-out caddyless drawer, and a
- rectangular green LED centered beneath it. NOTE: these CD-ROM
- drives will not be auto detected by the kernel at boot time; you
- have to provide the interface address as an option to the kernel at
- boot time as described in <file:Documentation/cdrom/cdu31a> or fill
- in your parameters into <file:drivers/cdrom/cdu31a.c>. Try "man
- bootparam" or see the documentation of your boot loader (lilo or
- loadlin) about how to pass options to the kernel.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called cdu31a.
-
-config CDU535
- tristate "Sony CDU535 CDROM support"
- depends on CD_NO_IDESCSI
- ---help---
- This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM
- drives. Please read the file <file:Documentation/cdrom/sonycd535>.
-
- If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
- file system support" below, because that's the file system used on
- CD-ROMs.
-
- To compile this driver as a module, choose M here: the
- module will be called sonycd535.
-
-endmenu
diff --git a/drivers/cdrom/Makefile b/drivers/cdrom/Makefile
index d1d1e5a4be73..774c180a4e11 100644
--- a/drivers/cdrom/Makefile
+++ b/drivers/cdrom/Makefile
@@ -10,14 +10,4 @@ obj-$(CONFIG_BLK_DEV_SR) += cdrom.o
obj-$(CONFIG_PARIDE_PCD) += cdrom.o
obj-$(CONFIG_CDROM_PKTCDVD) += cdrom.o
-obj-$(CONFIG_AZTCD) += aztcd.o
-obj-$(CONFIG_CDU31A) += cdu31a.o cdrom.o
-obj-$(CONFIG_CM206) += cm206.o cdrom.o
-obj-$(CONFIG_GSCD) += gscd.o
-obj-$(CONFIG_ISP16_CDI) += isp16.o
-obj-$(CONFIG_MCDX) += mcdx.o cdrom.o
-obj-$(CONFIG_OPTCD) += optcd.o
-obj-$(CONFIG_SBPCD) += sbpcd.o cdrom.o
-obj-$(CONFIG_SJCD) += sjcd.o
-obj-$(CONFIG_CDU535) += sonycd535.o
obj-$(CONFIG_VIOCD) += viocd.o cdrom.o
diff --git a/drivers/cdrom/aztcd.c b/drivers/cdrom/aztcd.c
deleted file mode 100644
index d7fbfaae2449..000000000000
--- a/drivers/cdrom/aztcd.c
+++ /dev/null
@@ -1,2492 +0,0 @@
-#define AZT_VERSION "2.60"
-
-/* $Id: aztcd.c,v 2.60 1997/11/29 09:51:19 root Exp root $
- linux/drivers/block/aztcd.c - Aztech CD268 CDROM driver
-
- Copyright (C) 1994-98 Werner Zimmermann(Werner.Zimmermann@fht-esslingen.de)
-
- based on Mitsumi CDROM driver by Martin Hariss and preworks by
- Eberhard Moenkeberg; contains contributions by Joe Nardone and Robby
- Schirmer.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- HISTORY
- V0.0 Adaption to Aztech CD268-01A Version 1.3
- Version is PRE_ALPHA, unresolved points:
- 1. I use busy wait instead of timer wait in STEN_LOW,DTEN_LOW
- thus driver causes CPU overhead and is very slow
- 2. could not find a way to stop the drive, when it is
- in data read mode, therefore I had to set
- msf.end.min/sec/frame to 0:0:1 (in azt_poll); so only one
- frame can be read in sequence, this is also the reason for
- 3. getting 'timeout in state 4' messages, but nevertheless
- it works
- W.Zimmermann, Oct. 31, 1994
- V0.1 Version is ALPHA, problems #2 and #3 resolved.
- W.Zimmermann, Nov. 3, 1994
- V0.2 Modification to some comments, debugging aids for partial test
- with Borland C under DOS eliminated. Timer interrupt wait
- STEN_LOW_WAIT additionally to busy wait for STEN_LOW implemented;
- use it only for the 'slow' commands (ACMD_GET_Q_CHANNEL, ACMD_
- SEEK_TO_LEAD_IN), all other commands are so 'fast', that busy
- waiting seems better to me than interrupt rescheduling.
- Besides that, when used in the wrong place, STEN_LOW_WAIT causes
- kernel panic.
- In function aztPlay command ACMD_PLAY_AUDIO added, should make
- audio functions work. The Aztech drive needs different commands
- to read data tracks and play audio tracks.
- W.Zimmermann, Nov. 8, 1994
- V0.3 Recognition of missing drive during boot up improved (speeded up).
- W.Zimmermann, Nov. 13, 1994
- V0.35 Rewrote the control mechanism in azt_poll (formerly mcd_poll)
- including removal of all 'goto' commands. :-);
- J. Nardone, Nov. 14, 1994
- V0.4 Renamed variables and constants to 'azt' instead of 'mcd'; had
- to make some "compatibility" defines in azt.h; please note,
- that the source file was renamed to azt.c, the include file to
- azt.h
- Speeded up drive recognition during init (will be a little bit
- slower than before if no drive is installed!); suggested by
- Robby Schirmer.
- read_count declared volatile and set to AZT_BUF_SIZ to make
- drive faster (now 300kB/sec, was 60kB/sec before, measured
- by 'time dd if=/dev/cdrom of=/dev/null bs=2048 count=4096';
- different AZT_BUF_SIZes were test, above 16 no further im-
- provement seems to be possible; suggested by E.Moenkeberg.
- W.Zimmermann, Nov. 18, 1994
- V0.42 Included getAztStatus command in GetQChannelInfo() to allow
- reading Q-channel info on audio disks, if drive is stopped,
- and some other bug fixes in the audio stuff, suggested by
- Robby Schirmer.
- Added more ioctls (reading data in mode 1 and mode 2).
- Completely removed the old azt_poll() routine.
- Detection of ORCHID CDS-3110 in aztcd_init implemented.
- Additional debugging aids (see the readme file).
- W.Zimmermann, Dec. 9, 1994
- V0.50 Autodetection of drives implemented.
- W.Zimmermann, Dec. 12, 1994
- V0.52 Prepared for including in the standard kernel, renamed most
- variables to contain 'azt', included autoconf.h
- W.Zimmermann, Dec. 16, 1994
- V0.6 Version for being included in the standard Linux kernel.
- Renamed source and header file to aztcd.c and aztcd.h
- W.Zimmermann, Dec. 24, 1994
- V0.7 Changed VERIFY_READ to VERIFY_WRITE in aztcd_ioctl, case
- CDROMREADMODE1 and CDROMREADMODE2; bug fix in the ioctl,
- which causes kernel crashes when playing audio, changed
- include-files (config.h instead of autoconf.h, removed
- delay.h)
- W.Zimmermann, Jan. 8, 1995
- V0.72 Some more modifications for adaption to the standard kernel.
- W.Zimmermann, Jan. 16, 1995
- V0.80 aztcd is now part of the standard kernel since version 1.1.83.
- Modified the SET_TIMER and CLEAR_TIMER macros to comply with
- the new timer scheme.
- W.Zimmermann, Jan. 21, 1995
- V0.90 Included CDROMVOLCTRL, but with my Aztech drive I can only turn
- the channels on and off. If it works better with your drive,
- please mail me. Also implemented ACMD_CLOSE for CDROMSTART.
- W.Zimmermann, Jan. 24, 1995
- V1.00 Implemented close and lock tray commands. Patches supplied by
- Frank Racis
- Added support for loadable MODULEs, so aztcd can now also be
- loaded by insmod and removed by rmmod during run time
- Werner Zimmermann, Mar. 24, 95
- V1.10 Implemented soundcard configuration for Orchid CDS-3110 drives
- connected to Soundwave32 cards. Release for LST 2.1.
- (still experimental)
- Werner Zimmermann, May 8, 95
- V1.20 Implemented limited support for DOSEMU0.60's cdrom.c. Now it works, but
- sometimes DOSEMU may hang for 30 seconds or so. A fully functional ver-
- sion needs an update of Dosemu0.60's cdrom.c, which will come with the
- next revision of Dosemu.
- Also Soundwave32 support now works.
- Werner Zimmermann, May 22, 95
- V1.30 Auto-eject feature. Inspired by Franc Racis (racis@psu.edu)
- Werner Zimmermann, July 4, 95
- V1.40 Started multisession support. Implementation copied from mcdx.c
- by Heiko Schlittermann. Not tested yet.
- Werner Zimmermann, July 15, 95
- V1.50 Implementation of ioctl CDROMRESET, continued multisession, began
- XA, but still untested. Heavy modifications to drive status de-
- tection.
- Werner Zimmermann, July 25, 95
- V1.60 XA support now should work. Speeded up drive recognition in cases,
- where no drive is installed.
- Werner Zimmermann, August 8, 1995
- V1.70 Multisession support now is completed, but there is still not
- enough testing done. If you can test it, please contact me. For
- details please read Documentation/cdrom/aztcd
- Werner Zimmermann, August 19, 1995
- V1.80 Modification to suit the new kernel boot procedure introduced
- with kernel 1.3.33. Will definitely not work with older kernels.
- Programming done by Linus himself.
- Werner Zimmermann, October 11, 1995
- V1.90 Support for Conrad TXC drives, thank's to Jochen Kunz and Olaf Kaluza.
- Werner Zimmermann, October 21, 1995
- V2.00 Changed #include "blk.h" to <linux/blk.h> as the directory
- structure was changed. README.aztcd is now /usr/src/docu-
- mentation/cdrom/aztcd
- Werner Zimmermann, November 10, 95
- V2.10 Started to modify azt_poll to prevent reading beyond end of
- tracks.
- Werner Zimmermann, December 3, 95
- V2.20 Changed some comments
- Werner Zimmermann, April 1, 96
- V2.30 Implemented support for CyCDROM CR520, CR940, Code for CR520
- delivered by H.Berger with preworks by E.Moenkeberg.
- Werner Zimmermann, April 29, 96
- V2.40 Reorganized the placement of functions in the source code file
- to reflect the layered approach; did not actually change code
- Werner Zimmermann, May 1, 96
- V2.50 Heiko Eissfeldt suggested to remove some VERIFY_READs in
- aztcd_ioctl; check_aztcd_media_change modified
- Werner Zimmermann, May 16, 96
- V2.60 Implemented Auto-Probing; made changes for kernel's 2.1.xx blocksize
- Adaption to linux kernel > 2.1.0
- Werner Zimmermann, Nov 29, 97
-
- November 1999 -- Make kernel-parameter implementation work with 2.3.x
- Removed init_module & cleanup_module in favor of
- module_init & module_exit.
- Torben Mathiasen <tmm@image.dk>
-*/
-
-#include <linux/blkdev.h>
-#include "aztcd.h"
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/major.h>
-
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-
-#include <asm/uaccess.h>
-
-/*###########################################################################
- Defines
- ###########################################################################
-*/
-
-#define MAJOR_NR AZTECH_CDROM_MAJOR
-#define QUEUE (azt_queue)
-#define CURRENT elv_next_request(azt_queue)
-#define SET_TIMER(func, jifs) delay_timer.expires = jiffies + (jifs); \
- delay_timer.function = (void *) (func); \
- add_timer(&delay_timer);
-
-#define CLEAR_TIMER del_timer(&delay_timer);
-
-#define RETURNM(message,value) {printk("aztcd: Warning: %s failed\n",message);\
- return value;}
-#define RETURN(message) {printk("aztcd: Warning: %s failed\n",message);\
- return;}
-
-/* Macros to switch the IDE-interface to the slave device and back to the master*/
-#define SWITCH_IDE_SLAVE outb_p(0xa0,azt_port+6); \
- outb_p(0x10,azt_port+6); \
- outb_p(0x00,azt_port+7); \
- outb_p(0x10,azt_port+6);
-#define SWITCH_IDE_MASTER outb_p(0xa0,azt_port+6);
-
-
-#if 0
-#define AZT_TEST
-#define AZT_TEST1 /* <int-..> */
-#define AZT_TEST2 /* do_aztcd_request */
-#define AZT_TEST3 /* AZT_S_state */
-#define AZT_TEST4 /* QUICK_LOOP-counter */
-#define AZT_TEST5 /* port(1) state */
-#define AZT_DEBUG
-#define AZT_DEBUG_MULTISESSION
-#endif
-
-static struct request_queue *azt_queue;
-
-static int current_valid(void)
-{
- return CURRENT &&
- rq_data_dir(CURRENT) == READ &&
- CURRENT->sector != -1;
-}
-
-#define AFL_STATUSorDATA (AFL_STATUS | AFL_DATA)
-#define AZT_BUF_SIZ 16
-
-#define READ_TIMEOUT 3000
-
-#define azt_port aztcd /*needed for the modutils */
-
-/*##########################################################################
- Type Definitions
- ##########################################################################
-*/
-enum azt_state_e { AZT_S_IDLE, /* 0 */
- AZT_S_START, /* 1 */
- AZT_S_MODE, /* 2 */
- AZT_S_READ, /* 3 */
- AZT_S_DATA, /* 4 */
- AZT_S_STOP, /* 5 */
- AZT_S_STOPPING /* 6 */
-};
-enum azt_read_modes { AZT_MODE_0, /*read mode for audio disks, not supported by Aztech firmware */
- AZT_MODE_1, /*read mode for normal CD-ROMs */
- AZT_MODE_2 /*read mode for XA CD-ROMs */
-};
-
-/*##########################################################################
- Global Variables
- ##########################################################################
-*/
-static int aztPresent = 0;
-
-static volatile int azt_transfer_is_active = 0;
-
-static char azt_buf[CD_FRAMESIZE_RAW * AZT_BUF_SIZ]; /*buffer for block size conversion */
-#if AZT_PRIVATE_IOCTLS
-static char buf[CD_FRAMESIZE_RAW]; /*separate buffer for the ioctls */
-#endif
-
-static volatile int azt_buf_bn[AZT_BUF_SIZ], azt_next_bn;
-static volatile int azt_buf_in, azt_buf_out = -1;
-static volatile int azt_error = 0;
-static int azt_open_count = 0;
-static volatile enum azt_state_e azt_state = AZT_S_IDLE;
-#ifdef AZT_TEST3
-static volatile enum azt_state_e azt_state_old = AZT_S_STOP;
-static volatile int azt_st_old = 0;
-#endif
-static volatile enum azt_read_modes azt_read_mode = AZT_MODE_1;
-
-static int azt_mode = -1;
-static volatile int azt_read_count = 1;
-
-static int azt_port = AZT_BASE_ADDR;
-
-module_param(azt_port, int, 0);
-
-static int azt_port_auto[16] = AZT_BASE_AUTO;
-
-static char azt_cont = 0;
-static char azt_init_end = 0;
-static char azt_auto_eject = AZT_AUTO_EJECT;
-
-static int AztTimeout, AztTries;
-static DECLARE_WAIT_QUEUE_HEAD(azt_waitq);
-static DEFINE_TIMER(delay_timer, NULL, 0, 0);
-
-static struct azt_DiskInfo DiskInfo;
-static struct azt_Toc Toc[MAX_TRACKS];
-static struct azt_Play_msf azt_Play;
-
-static int aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-static char aztDiskChanged = 1;
-static char aztTocUpToDate = 0;
-
-static unsigned char aztIndatum;
-static unsigned long aztTimeOutCount;
-static int aztCmd = 0;
-
-static DEFINE_SPINLOCK(aztSpin);
-
-/*###########################################################################
- Function Prototypes
- ###########################################################################
-*/
-/* CDROM Drive Low Level I/O Functions */
-static void aztStatTimer(void);
-
-/* CDROM Drive Command Functions */
-static int aztGetDiskInfo(void);
-#if AZT_MULTISESSION
-static int aztGetMultiDiskInfo(void);
-#endif
-static int aztGetToc(int multi);
-
-/* Kernel Interface Functions */
-static int check_aztcd_media_change(struct gendisk *disk);
-static int aztcd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
- unsigned long arg);
-static int aztcd_open(struct inode *ip, struct file *fp);
-static int aztcd_release(struct inode *inode, struct file *file);
-
-static struct block_device_operations azt_fops = {
- .owner = THIS_MODULE,
- .open = aztcd_open,
- .release = aztcd_release,
- .ioctl = aztcd_ioctl,
- .media_changed = check_aztcd_media_change,
-};
-
-/* Aztcd State Machine: Controls Drive Operating State */
-static void azt_poll(void);
-
-/* Miscellaneous support functions */
-static void azt_hsg2msf(long hsg, struct msf *msf);
-static long azt_msf2hsg(struct msf *mp);
-static void azt_bin2bcd(unsigned char *p);
-static int azt_bcd2bin(unsigned char bcd);
-
-/*##########################################################################
- CDROM Drive Low Level I/O Functions
- ##########################################################################
-*/
-/* Macros for the drive hardware interface handshake, these macros use
- busy waiting */
-/* Wait for OP_OK = drive answers with AFL_OP_OK after receiving a command*/
-# define OP_OK op_ok()
-static void op_ok(void)
-{
- aztTimeOutCount = 0;
- do {
- aztIndatum = inb(DATA_PORT);
- aztTimeOutCount++;
- if (aztTimeOutCount >= AZT_TIMEOUT) {
- printk("aztcd: Error Wait OP_OK\n");
- break;
- }
- } while (aztIndatum != AFL_OP_OK);
-}
-
-/* Wait for PA_OK = drive answers with AFL_PA_OK after receiving parameters*/
-#if 0
-# define PA_OK pa_ok()
-static void pa_ok(void)
-{
- aztTimeOutCount = 0;
- do {
- aztIndatum = inb(DATA_PORT);
- aztTimeOutCount++;
- if (aztTimeOutCount >= AZT_TIMEOUT) {
- printk("aztcd: Error Wait PA_OK\n");
- break;
- }
- } while (aztIndatum != AFL_PA_OK);
-}
-#endif
-
-/* Wait for STEN=Low = handshake signal 'AFL_.._OK available or command executed*/
-# define STEN_LOW sten_low()
-static void sten_low(void)
-{
- aztTimeOutCount = 0;
- do {
- aztIndatum = inb(STATUS_PORT);
- aztTimeOutCount++;
- if (aztTimeOutCount >= AZT_TIMEOUT) {
- if (azt_init_end)
- printk
- ("aztcd: Error Wait STEN_LOW commands:%x\n",
- aztCmd);
- break;
- }
- } while (aztIndatum & AFL_STATUS);
-}
-
-/* Wait for DTEN=Low = handshake signal 'Data available'*/
-# define DTEN_LOW dten_low()
-static void dten_low(void)
-{
- aztTimeOutCount = 0;
- do {
- aztIndatum = inb(STATUS_PORT);
- aztTimeOutCount++;
- if (aztTimeOutCount >= AZT_TIMEOUT) {
- printk("aztcd: Error Wait DTEN_OK\n");
- break;
- }
- } while (aztIndatum & AFL_DATA);
-}
-
-/*
- * Macro for timer wait on STEN=Low, should only be used for 'slow' commands;
- * may cause kernel panic when used in the wrong place
-*/
-#define STEN_LOW_WAIT statusAzt()
-static void statusAzt(void)
-{
- AztTimeout = AZT_STATUS_DELAY;
- SET_TIMER(aztStatTimer, HZ / 100);
- sleep_on(&azt_waitq);
- if (AztTimeout <= 0)
- printk("aztcd: Error Wait STEN_LOW_WAIT command:%x\n",
- aztCmd);
- return;
-}
-
-static void aztStatTimer(void)
-{
- if (!(inb(STATUS_PORT) & AFL_STATUS)) {
- wake_up(&azt_waitq);
- return;
- }
- AztTimeout--;
- if (AztTimeout <= 0) {
- wake_up(&azt_waitq);
- printk("aztcd: Error aztStatTimer: Timeout\n");
- return;
- }
- SET_TIMER(aztStatTimer, HZ / 100);
-}
-
-/*##########################################################################
- CDROM Drive Command Functions
- ##########################################################################
-*/
-/*
- * Send a single command, return -1 on error, else 0
-*/
-static int aztSendCmd(int cmd)
-{
- unsigned char data;
- int retry;
-
-#ifdef AZT_DEBUG
- printk("aztcd: Executing command %x\n", cmd);
-#endif
-
- if ((azt_port == 0x1f0) || (azt_port == 0x170))
- SWITCH_IDE_SLAVE; /*switch IDE interface to slave configuration */
-
- aztCmd = cmd;
- outb(POLLED, MODE_PORT);
- do {
- if (inb(STATUS_PORT) & AFL_STATUS)
- break;
- inb(DATA_PORT); /* if status left from last command, read and */
- } while (1); /* discard it */
- do {
- if (inb(STATUS_PORT) & AFL_DATA)
- break;
- inb(DATA_PORT); /* if data left from last command, read and */
- } while (1); /* discard it */
- for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
- outb((unsigned char) cmd, CMD_PORT);
- STEN_LOW;
- data = inb(DATA_PORT);
- if (data == AFL_OP_OK) {
- return 0;
- } /*OP_OK? */
- if (data == AFL_OP_ERR) {
- STEN_LOW;
- data = inb(DATA_PORT);
- printk
- ("### Error 1 aztcd: aztSendCmd %x Error Code %x\n",
- cmd, data);
- }
- }
- if (retry >= AZT_RETRY_ATTEMPTS) {
- printk("### Error 2 aztcd: aztSendCmd %x \n", cmd);
- azt_error = 0xA5;
- }
- RETURNM("aztSendCmd", -1);
-}
-
-/*
- * Send a play or read command to the drive, return -1 on error, else 0
-*/
-static int sendAztCmd(int cmd, struct azt_Play_msf *params)
-{
- unsigned char data;
- int retry;
-
-#ifdef AZT_DEBUG
- printk("aztcd: play start=%02x:%02x:%02x end=%02x:%02x:%02x\n",
- params->start.min, params->start.sec, params->start.frame,
- params->end.min, params->end.sec, params->end.frame);
-#endif
- for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
- aztSendCmd(cmd);
- outb(params->start.min, CMD_PORT);
- outb(params->start.sec, CMD_PORT);
- outb(params->start.frame, CMD_PORT);
- outb(params->end.min, CMD_PORT);
- outb(params->end.sec, CMD_PORT);
- outb(params->end.frame, CMD_PORT);
- STEN_LOW;
- data = inb(DATA_PORT);
- if (data == AFL_PA_OK) {
- return 0;
- } /*PA_OK ? */
- if (data == AFL_PA_ERR) {
- STEN_LOW;
- data = inb(DATA_PORT);
- printk
- ("### Error 1 aztcd: sendAztCmd %x Error Code %x\n",
- cmd, data);
- }
- }
- if (retry >= AZT_RETRY_ATTEMPTS) {
- printk("### Error 2 aztcd: sendAztCmd %x\n ", cmd);
- azt_error = 0xA5;
- }
- RETURNM("sendAztCmd", -1);
-}
-
-/*
- * Send a seek command to the drive, return -1 on error, else 0
-*/
-static int aztSeek(struct azt_Play_msf *params)
-{
- unsigned char data;
- int retry;
-
-#ifdef AZT_DEBUG
- printk("aztcd: aztSeek %02x:%02x:%02x\n",
- params->start.min, params->start.sec, params->start.frame);
-#endif
- for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
- aztSendCmd(ACMD_SEEK);
- outb(params->start.min, CMD_PORT);
- outb(params->start.sec, CMD_PORT);
- outb(params->start.frame, CMD_PORT);
- STEN_LOW;
- data = inb(DATA_PORT);
- if (data == AFL_PA_OK) {
- return 0;
- } /*PA_OK ? */
- if (data == AFL_PA_ERR) {
- STEN_LOW;
- data = inb(DATA_PORT);
- printk("### Error 1 aztcd: aztSeek\n");
- }
- }
- if (retry >= AZT_RETRY_ATTEMPTS) {
- printk("### Error 2 aztcd: aztSeek\n ");
- azt_error = 0xA5;
- }
- RETURNM("aztSeek", -1);
-}
-
-/* Send a Set Disk Type command
- does not seem to work with Aztech drives, behavior is completely indepen-
- dent on which mode is set ???
-*/
-static int aztSetDiskType(int type)
-{
- unsigned char data;
- int retry;
-
-#ifdef AZT_DEBUG
- printk("aztcd: set disk type command: type= %i\n", type);
-#endif
- for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
- aztSendCmd(ACMD_SET_DISK_TYPE);
- outb(type, CMD_PORT);
- STEN_LOW;
- data = inb(DATA_PORT);
- if (data == AFL_PA_OK) { /*PA_OK ? */
- azt_read_mode = type;
- return 0;
- }
- if (data == AFL_PA_ERR) {
- STEN_LOW;
- data = inb(DATA_PORT);
- printk
- ("### Error 1 aztcd: aztSetDiskType %x Error Code %x\n",
- type, data);
- }
- }
- if (retry >= AZT_RETRY_ATTEMPTS) {
- printk("### Error 2 aztcd: aztSetDiskType %x\n ", type);
- azt_error = 0xA5;
- }
- RETURNM("aztSetDiskType", -1);
-}
-
-
-/* used in azt_poll to poll the status, expects another program to issue a
- * ACMD_GET_STATUS directly before
- */
-static int aztStatus(void)
-{
- int st;
-/* int i;
-
- i = inb(STATUS_PORT) & AFL_STATUS; is STEN=0? ???
- if (!i)
-*/ STEN_LOW;
- if (aztTimeOutCount < AZT_TIMEOUT) {
- st = inb(DATA_PORT) & 0xFF;
- return st;
- } else
- RETURNM("aztStatus", -1);
-}
-
-/*
- * Get the drive status
- */
-static int getAztStatus(void)
-{
- int st;
-
- if (aztSendCmd(ACMD_GET_STATUS))
- RETURNM("getAztStatus 1", -1);
- STEN_LOW;
- st = inb(DATA_PORT) & 0xFF;
-#ifdef AZT_DEBUG
- printk("aztcd: Status = %x\n", st);
-#endif
- if ((st == 0xFF) || (st & AST_CMD_CHECK)) {
- printk
- ("aztcd: AST_CMD_CHECK error or no status available\n");
- return -1;
- }
-
- if (((st & AST_MODE_BITS) != AST_BUSY)
- && (aztAudioStatus == CDROM_AUDIO_PLAY))
- /* XXX might be an error? look at q-channel? */
- aztAudioStatus = CDROM_AUDIO_COMPLETED;
-
- if ((st & AST_DSK_CHG) || (st & AST_NOT_READY)) {
- aztDiskChanged = 1;
- aztTocUpToDate = 0;
- aztAudioStatus = CDROM_AUDIO_NO_STATUS;
- }
- return st;
-}
-
-
-/*
- * Send a 'Play' command and get the status. Use only from the top half.
- */
-static int aztPlay(struct azt_Play_msf *arg)
-{
- if (sendAztCmd(ACMD_PLAY_AUDIO, arg) < 0)
- RETURNM("aztPlay", -1);
- return 0;
-}
-
-/*
- * Subroutines to automatically close the door (tray) and
- * lock it closed when the cd is mounted. Leave the tray
- * locking as an option
- */
-static void aztCloseDoor(void)
-{
- aztSendCmd(ACMD_CLOSE);
- STEN_LOW;
- return;
-}
-
-static void aztLockDoor(void)
-{
-#if AZT_ALLOW_TRAY_LOCK
- aztSendCmd(ACMD_LOCK);
- STEN_LOW;
-#endif
- return;
-}
-
-static void aztUnlockDoor(void)
-{
-#if AZT_ALLOW_TRAY_LOCK
- aztSendCmd(ACMD_UNLOCK);
- STEN_LOW;
-#endif
- return;
-}
-
-/*
- * Read a value from the drive. Should return quickly, so a busy wait
- * is used to avoid excessive rescheduling. The read command itself must
- * be issued with aztSendCmd() directly before
- */
-static int aztGetValue(unsigned char *result)
-{
- int s;
-
- STEN_LOW;
- if (aztTimeOutCount >= AZT_TIMEOUT) {
- printk("aztcd: aztGetValue timeout\n");
- return -1;
- }
- s = inb(DATA_PORT) & 0xFF;
- *result = (unsigned char) s;
- return 0;
-}
-
-/*
- * Read the current Q-channel info. Also used for reading the
- * table of contents.
- */
-static int aztGetQChannelInfo(struct azt_Toc *qp)
-{
- unsigned char notUsed;
- int st;
-
-#ifdef AZT_DEBUG
- printk("aztcd: starting aztGetQChannelInfo Time:%li\n", jiffies);
-#endif
- if ((st = getAztStatus()) == -1)
- RETURNM("aztGetQChannelInfo 1", -1);
- if (aztSendCmd(ACMD_GET_Q_CHANNEL))
- RETURNM("aztGetQChannelInfo 2", -1);
- /*STEN_LOW_WAIT; ??? Dosemu0.60's cdrom.c does not like STEN_LOW_WAIT here */
- if (aztGetValue(&notUsed))
- RETURNM("aztGetQChannelInfo 3", -1); /*??? Nullbyte einlesen */
- if ((st & AST_MODE_BITS) == AST_INITIAL) {
- qp->ctrl_addr = 0; /* when audio stop ACMD_GET_Q_CHANNEL returns */
- qp->track = 0; /* only one byte with Aztech drives */
- qp->pointIndex = 0;
- qp->trackTime.min = 0;
- qp->trackTime.sec = 0;
- qp->trackTime.frame = 0;
- qp->diskTime.min = 0;
- qp->diskTime.sec = 0;
- qp->diskTime.frame = 0;
- return 0;
- } else {
- if (aztGetValue(&qp->ctrl_addr) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->track) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->pointIndex) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->trackTime.min) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->trackTime.sec) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->trackTime.frame) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&notUsed) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->diskTime.min) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->diskTime.sec) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- if (aztGetValue(&qp->diskTime.frame) < 0)
- RETURNM("aztGetQChannelInfo 4", -1);
- }
-#ifdef AZT_DEBUG
- printk("aztcd: exiting aztGetQChannelInfo Time:%li\n", jiffies);
-#endif
- return 0;
-}
-
-/*
- * Read the table of contents (TOC) and TOC header if necessary
- */
-static int aztUpdateToc(void)
-{
- int st;
-
-#ifdef AZT_DEBUG
- printk("aztcd: starting aztUpdateToc Time:%li\n", jiffies);
-#endif
- if (aztTocUpToDate)
- return 0;
-
- if (aztGetDiskInfo() < 0)
- return -EIO;
-
- if (aztGetToc(0) < 0)
- return -EIO;
-
- /*audio disk detection
- with my Aztech drive there is no audio status bit, so I use the copy
- protection bit of the first track. If this track is copy protected
- (copy bit = 0), I assume, it's an audio disk. Strange, but works ??? */
- if (!(Toc[DiskInfo.first].ctrl_addr & 0x40))
- DiskInfo.audio = 1;
- else
- DiskInfo.audio = 0;
-
- /* XA detection */
- if (!DiskInfo.audio) {
- azt_Play.start.min = 0; /*XA detection only seems to work */
- azt_Play.start.sec = 2; /*when we play a track */
- azt_Play.start.frame = 0;
- azt_Play.end.min = 0;
- azt_Play.end.sec = 0;
- azt_Play.end.frame = 1;
- if (sendAztCmd(ACMD_PLAY_READ, &azt_Play))
- return -1;
- DTEN_LOW;
- for (st = 0; st < CD_FRAMESIZE; st++)
- inb(DATA_PORT);
- }
- DiskInfo.xa = getAztStatus() & AST_MODE;
- if (DiskInfo.xa) {
- printk
- ("aztcd: XA support experimental - mail results to Werner.Zimmermann@fht-esslingen.de\n");
- }
-
- /*multisession detection
- support for multisession CDs is done automatically with Aztech drives,
- we don't have to take care about TOC redirection; if we want the isofs
- to take care about redirection, we have to set AZT_MULTISESSION to 1 */
- DiskInfo.multi = 0;
-#if AZT_MULTISESSION
- if (DiskInfo.xa) {
- aztGetMultiDiskInfo(); /*here Disk.Info.multi is set */
- }
-#endif
- if (DiskInfo.multi) {
- DiskInfo.lastSession.min = Toc[DiskInfo.next].diskTime.min;
- DiskInfo.lastSession.sec = Toc[DiskInfo.next].diskTime.sec;
- DiskInfo.lastSession.frame =
- Toc[DiskInfo.next].diskTime.frame;
- printk("aztcd: Multisession support experimental\n");
- } else {
- DiskInfo.lastSession.min =
- Toc[DiskInfo.first].diskTime.min;
- DiskInfo.lastSession.sec =
- Toc[DiskInfo.first].diskTime.sec;
- DiskInfo.lastSession.frame =
- Toc[DiskInfo.first].diskTime.frame;
- }
-
- aztTocUpToDate = 1;
-#ifdef AZT_DEBUG
- printk("aztcd: exiting aztUpdateToc Time:%li\n", jiffies);
-#endif
- return 0;
-}
-
-
-/* Read the table of contents header, i.e. no. of tracks and start of first
- * track
- */
-static int aztGetDiskInfo(void)
-{
- int limit;
- unsigned char test;
- struct azt_Toc qInfo;
-
-#ifdef AZT_DEBUG
- printk("aztcd: starting aztGetDiskInfo Time:%li\n", jiffies);
-#endif
- if (aztSendCmd(ACMD_SEEK_TO_LEADIN))
- RETURNM("aztGetDiskInfo 1", -1);
- STEN_LOW_WAIT;
- test = 0;
- for (limit = 300; limit > 0; limit--) {
- if (aztGetQChannelInfo(&qInfo) < 0)
- RETURNM("aztGetDiskInfo 2", -1);
- if (qInfo.pointIndex == 0xA0) { /*Number of FirstTrack */
- DiskInfo.first = qInfo.diskTime.min;
- DiskInfo.first = azt_bcd2bin(DiskInfo.first);
- test = test | 0x01;
- }
- if (qInfo.pointIndex == 0xA1) { /*Number of LastTrack */
- DiskInfo.last = qInfo.diskTime.min;
- DiskInfo.last = azt_bcd2bin(DiskInfo.last);
- test = test | 0x02;
- }
- if (qInfo.pointIndex == 0xA2) { /*DiskLength */
- DiskInfo.diskLength.min = qInfo.diskTime.min;
- DiskInfo.diskLength.sec = qInfo.diskTime.sec;
- DiskInfo.diskLength.frame = qInfo.diskTime.frame;
- test = test | 0x04;
- }
- if ((qInfo.pointIndex == DiskInfo.first) && (test & 0x01)) { /*StartTime of First Track */
- DiskInfo.firstTrack.min = qInfo.diskTime.min;
- DiskInfo.firstTrack.sec = qInfo.diskTime.sec;
- DiskInfo.firstTrack.frame = qInfo.diskTime.frame;
- test = test | 0x08;
- }
- if (test == 0x0F)
- break;
- }
-#ifdef AZT_DEBUG
- printk("aztcd: exiting aztGetDiskInfo Time:%li\n", jiffies);
- printk
- ("Disk Info: first %d last %d length %02X:%02X.%02X dez first %02X:%02X.%02X dez\n",
- DiskInfo.first, DiskInfo.last, DiskInfo.diskLength.min,
- DiskInfo.diskLength.sec, DiskInfo.diskLength.frame,
- DiskInfo.firstTrack.min, DiskInfo.firstTrack.sec,
- DiskInfo.firstTrack.frame);
-#endif
- if (test != 0x0F)
- return -1;
- return 0;
-}
-
-#if AZT_MULTISESSION
-/*
- * Get Multisession Disk Info
- */
-static int aztGetMultiDiskInfo(void)
-{
- int limit, k = 5;
- unsigned char test;
- struct azt_Toc qInfo;
-
-#ifdef AZT_DEBUG
- printk("aztcd: starting aztGetMultiDiskInfo\n");
-#endif
-
- do {
- azt_Play.start.min = Toc[DiskInfo.last + 1].diskTime.min;
- azt_Play.start.sec = Toc[DiskInfo.last + 1].diskTime.sec;
- azt_Play.start.frame =
- Toc[DiskInfo.last + 1].diskTime.frame;
- test = 0;
-
- for (limit = 30; limit > 0; limit--) { /*Seek for LeadIn of next session */
- if (aztSeek(&azt_Play))
- RETURNM("aztGetMultiDiskInfo 1", -1);
- if (aztGetQChannelInfo(&qInfo) < 0)
- RETURNM("aztGetMultiDiskInfo 2", -1);
- if ((qInfo.track == 0) && (qInfo.pointIndex))
- break; /*LeadIn found */
- if ((azt_Play.start.sec += 10) > 59) {
- azt_Play.start.sec = 0;
- azt_Play.start.min++;
- }
- }
- if (!limit)
- break; /*Check, if a leadin track was found, if not we're
- at the end of the disk */
-#ifdef AZT_DEBUG_MULTISESSION
- printk("leadin found track %d pointIndex %x limit %d\n",
- qInfo.track, qInfo.pointIndex, limit);
-#endif
- for (limit = 300; limit > 0; limit--) {
- if (++azt_Play.start.frame > 74) {
- azt_Play.start.frame = 0;
- if (azt_Play.start.sec > 59) {
- azt_Play.start.sec = 0;
- azt_Play.start.min++;
- }
- }
- if (aztSeek(&azt_Play))
- RETURNM("aztGetMultiDiskInfo 3", -1);
- if (aztGetQChannelInfo(&qInfo) < 0)
- RETURNM("aztGetMultiDiskInfo 4", -1);
- if (qInfo.pointIndex == 0xA0) { /*Number of NextTrack */
- DiskInfo.next = qInfo.diskTime.min;
- DiskInfo.next = azt_bcd2bin(DiskInfo.next);
- test = test | 0x01;
- }
- if (qInfo.pointIndex == 0xA1) { /*Number of LastTrack */
- DiskInfo.last = qInfo.diskTime.min;
- DiskInfo.last = azt_bcd2bin(DiskInfo.last);
- test = test | 0x02;
- }
- if (qInfo.pointIndex == 0xA2) { /*DiskLength */
- DiskInfo.diskLength.min =
- qInfo.diskTime.min;
- DiskInfo.diskLength.sec =
- qInfo.diskTime.sec;
- DiskInfo.diskLength.frame =
- qInfo.diskTime.frame;
- test = test | 0x04;
- }
- if ((qInfo.pointIndex == DiskInfo.next) && (test & 0x01)) { /*StartTime of Next Track */
- DiskInfo.nextSession.min =
- qInfo.diskTime.min;
- DiskInfo.nextSession.sec =
- qInfo.diskTime.sec;
- DiskInfo.nextSession.frame =
- qInfo.diskTime.frame;
- test = test | 0x08;
- }
- if (test == 0x0F)
- break;
- }
-#ifdef AZT_DEBUG_MULTISESSION
- printk
- ("MultiDisk Info: first %d next %d last %d length %02x:%02x.%02x dez first %02x:%02x.%02x dez next %02x:%02x.%02x dez\n",
- DiskInfo.first, DiskInfo.next, DiskInfo.last,
- DiskInfo.diskLength.min, DiskInfo.diskLength.sec,
- DiskInfo.diskLength.frame, DiskInfo.firstTrack.min,
- DiskInfo.firstTrack.sec, DiskInfo.firstTrack.frame,
- DiskInfo.nextSession.min, DiskInfo.nextSession.sec,
- DiskInfo.nextSession.frame);
-#endif
- if (test != 0x0F)
- break;
- else
- DiskInfo.multi = 1; /*found TOC of more than one session */
- aztGetToc(1);
- } while (--k);
-
-#ifdef AZT_DEBUG
- printk("aztcd: exiting aztGetMultiDiskInfo Time:%li\n", jiffies);
-#endif
- return 0;
-}
-#endif
-
-/*
- * Read the table of contents (TOC)
- */
-static int aztGetToc(int multi)
-{
- int i, px;
- int limit;
- struct azt_Toc qInfo;
-
-#ifdef AZT_DEBUG
- printk("aztcd: starting aztGetToc Time:%li\n", jiffies);
-#endif
- if (!multi) {
- for (i = 0; i < MAX_TRACKS; i++)
- Toc[i].pointIndex = 0;
- i = DiskInfo.last + 3;
- } else {
- for (i = DiskInfo.next; i < MAX_TRACKS; i++)
- Toc[i].pointIndex = 0;
- i = DiskInfo.last + 4 - DiskInfo.next;
- }
-
-/*Is there a good reason to stop motor before TOC read?
- if (aztSendCmd(ACMD_STOP)) RETURNM("aztGetToc 1",-1);
- STEN_LOW_WAIT;
-*/
-
- if (!multi) {
- azt_mode = 0x05;
- if (aztSendCmd(ACMD_SEEK_TO_LEADIN))
- RETURNM("aztGetToc 2", -1);
- STEN_LOW_WAIT;
- }
- for (limit = 300; limit > 0; limit--) {
- if (multi) {
- if (++azt_Play.start.sec > 59) {
- azt_Play.start.sec = 0;
- azt_Play.start.min++;
- }
- if (aztSeek(&azt_Play))
- RETURNM("aztGetToc 3", -1);
- }
- if (aztGetQChannelInfo(&qInfo) < 0)
- break;
-
- px = azt_bcd2bin(qInfo.pointIndex);
-
- if (px > 0 && px < MAX_TRACKS && qInfo.track == 0)
- if (Toc[px].pointIndex == 0) {
- Toc[px] = qInfo;
- i--;
- }
-
- if (i <= 0)
- break;
- }
-
- Toc[DiskInfo.last + 1].diskTime = DiskInfo.diskLength;
- Toc[DiskInfo.last].trackTime = DiskInfo.diskLength;
-
-#ifdef AZT_DEBUG_MULTISESSION
- printk("aztcd: exiting aztGetToc\n");
- for (i = 1; i <= DiskInfo.last + 1; i++)
- printk
- ("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X dez %02X:%02X.%02X dez\n",
- i, Toc[i].ctrl_addr, Toc[i].track, Toc[i].pointIndex,
- Toc[i].trackTime.min, Toc[i].trackTime.sec,
- Toc[i].trackTime.frame, Toc[i].diskTime.min,
- Toc[i].diskTime.sec, Toc[i].diskTime.frame);
- for (i = 100; i < 103; i++)
- printk
- ("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X dez %02X:%02X.%02X dez\n",
- i, Toc[i].ctrl_addr, Toc[i].track, Toc[i].pointIndex,
- Toc[i].trackTime.min, Toc[i].trackTime.sec,
- Toc[i].trackTime.frame, Toc[i].diskTime.min,
- Toc[i].diskTime.sec, Toc[i].diskTime.frame);
-#endif
-
- return limit > 0 ? 0 : -1;
-}
-
-
-/*##########################################################################
- Kernel Interface Functions
- ##########################################################################
-*/
-
-#ifndef MODULE
-static int __init aztcd_setup(char *str)
-{
- int ints[4];
-
- (void) get_options(str, ARRAY_SIZE(ints), ints);
-
- if (ints[0] > 0)
- azt_port = ints[1];
- if (ints[1] > 1)
- azt_cont = ints[2];
- return 1;
-}
-
-__setup("aztcd=", aztcd_setup);
-
-#endif /* !MODULE */
-
-/*
- * Checking if the media has been changed
-*/
-static int check_aztcd_media_change(struct gendisk *disk)
-{
- if (aztDiskChanged) { /* disk changed */
- aztDiskChanged = 0;
- return 1;
- } else
- return 0; /* no change */
-}
-
-/*
- * Kernel IO-controls
-*/
-static int aztcd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
- unsigned long arg)
-{
- int i;
- struct azt_Toc qInfo;
- struct cdrom_ti ti;
- struct cdrom_tochdr tocHdr;
- struct cdrom_msf msf;
- struct cdrom_tocentry entry;
- struct azt_Toc *tocPtr;
- struct cdrom_subchnl subchnl;
- struct cdrom_volctrl volctrl;
- void __user *argp = (void __user *)arg;
-
-#ifdef AZT_DEBUG
- printk("aztcd: starting aztcd_ioctl - Command:%x Time: %li\n",
- cmd, jiffies);
- printk("aztcd Status %x\n", getAztStatus());
-#endif
- if (!ip)
- RETURNM("aztcd_ioctl 1", -EINVAL);
- if (getAztStatus() < 0)
- RETURNM("aztcd_ioctl 2", -EIO);
- if ((!aztTocUpToDate) || (aztDiskChanged)) {
- if ((i = aztUpdateToc()) < 0)
- RETURNM("aztcd_ioctl 3", i); /* error reading TOC */
- }
-
- switch (cmd) {
- case CDROMSTART: /* Spin up the drive. Don't know, what to do,
- at least close the tray */
-#if AZT_PRIVATE_IOCTLS
- if (aztSendCmd(ACMD_CLOSE))
- RETURNM("aztcd_ioctl 4", -1);
- STEN_LOW_WAIT;
-#endif
- break;
- case CDROMSTOP: /* Spin down the drive */
- if (aztSendCmd(ACMD_STOP))
- RETURNM("aztcd_ioctl 5", -1);
- STEN_LOW_WAIT;
- /* should we do anything if it fails? */
- aztAudioStatus = CDROM_AUDIO_NO_STATUS;
- break;
- case CDROMPAUSE: /* Pause the drive */
- if (aztAudioStatus != CDROM_AUDIO_PLAY)
- return -EINVAL;
-
- if (aztGetQChannelInfo(&qInfo) < 0) { /* didn't get q channel info */
- aztAudioStatus = CDROM_AUDIO_NO_STATUS;
- RETURNM("aztcd_ioctl 7", 0);
- }
- azt_Play.start = qInfo.diskTime; /* remember restart point */
-
- if (aztSendCmd(ACMD_PAUSE))
- RETURNM("aztcd_ioctl 8", -1);
- STEN_LOW_WAIT;
- aztAudioStatus = CDROM_AUDIO_PAUSED;
- break;
- case CDROMRESUME: /* Play it again, Sam */
- if (aztAudioStatus != CDROM_AUDIO_PAUSED)
- return -EINVAL;
- /* restart the drive at the saved position. */
- i = aztPlay(&azt_Play);
- if (i < 0) {
- aztAudioStatus = CDROM_AUDIO_ERROR;
- return -EIO;
- }
- aztAudioStatus = CDROM_AUDIO_PLAY;
- break;
- case CDROMMULTISESSION: /*multisession support -- experimental */
- {
- struct cdrom_multisession ms;
-#ifdef AZT_DEBUG
- printk("aztcd ioctl MULTISESSION\n");
-#endif
- if (copy_from_user(&ms, argp,
- sizeof(struct cdrom_multisession)))
- return -EFAULT;
- if (ms.addr_format == CDROM_MSF) {
- ms.addr.msf.minute =
- azt_bcd2bin(DiskInfo.lastSession.min);
- ms.addr.msf.second =
- azt_bcd2bin(DiskInfo.lastSession.sec);
- ms.addr.msf.frame =
- azt_bcd2bin(DiskInfo.lastSession.
- frame);
- } else if (ms.addr_format == CDROM_LBA)
- ms.addr.lba =
- azt_msf2hsg(&DiskInfo.lastSession);
- else
- return -EINVAL;
- ms.xa_flag = DiskInfo.xa;
- if (copy_to_user(argp, &ms,
- sizeof(struct cdrom_multisession)))
- return -EFAULT;
-#ifdef AZT_DEBUG
- if (ms.addr_format == CDROM_MSF)
- printk
- ("aztcd multisession xa:%d, msf:%02x:%02x.%02x [%02x:%02x.%02x])\n",
- ms.xa_flag, ms.addr.msf.minute,
- ms.addr.msf.second, ms.addr.msf.frame,
- DiskInfo.lastSession.min,
- DiskInfo.lastSession.sec,
- DiskInfo.lastSession.frame);
- else
- printk
- ("aztcd multisession %d, lba:0x%08x [%02x:%02x.%02x])\n",
- ms.xa_flag, ms.addr.lba,
- DiskInfo.lastSession.min,
- DiskInfo.lastSession.sec,
- DiskInfo.lastSession.frame);
-#endif
- return 0;
- }
- case CDROMPLAYTRKIND: /* Play a track. This currently ignores index. */
- if (copy_from_user(&ti, argp, sizeof ti))
- return -EFAULT;
- if (ti.cdti_trk0 < DiskInfo.first
- || ti.cdti_trk0 > DiskInfo.last
- || ti.cdti_trk1 < ti.cdti_trk0) {
- return -EINVAL;
- }
- if (ti.cdti_trk1 > DiskInfo.last)
- ti.cdti_trk1 = DiskInfo.last;
- azt_Play.start = Toc[ti.cdti_trk0].diskTime;
- azt_Play.end = Toc[ti.cdti_trk1 + 1].diskTime;
-#ifdef AZT_DEBUG
- printk("aztcd play: %02x:%02x.%02x to %02x:%02x.%02x\n",
- azt_Play.start.min, azt_Play.start.sec,
- azt_Play.start.frame, azt_Play.end.min,
- azt_Play.end.sec, azt_Play.end.frame);
-#endif
- i = aztPlay(&azt_Play);
- if (i < 0) {
- aztAudioStatus = CDROM_AUDIO_ERROR;
- return -EIO;
- }
- aztAudioStatus = CDROM_AUDIO_PLAY;
- break;
- case CDROMPLAYMSF: /* Play starting at the given MSF address. */
-/* if (aztAudioStatus == CDROM_AUDIO_PLAY)
- { if (aztSendCmd(ACMD_STOP)) RETURNM("aztcd_ioctl 9",-1);
- STEN_LOW;
- aztAudioStatus = CDROM_AUDIO_NO_STATUS;
- }
-*/
- if (copy_from_user(&msf, argp, sizeof msf))
- return -EFAULT;
- /* convert to bcd */
- azt_bin2bcd(&msf.cdmsf_min0);
- azt_bin2bcd(&msf.cdmsf_sec0);
- azt_bin2bcd(&msf.cdmsf_frame0);
- azt_bin2bcd(&msf.cdmsf_min1);
- azt_bin2bcd(&msf.cdmsf_sec1);
- azt_bin2bcd(&msf.cdmsf_frame1);
- azt_Play.start.min = msf.cdmsf_min0;
- azt_Play.start.sec = msf.cdmsf_sec0;
- azt_Play.start.frame = msf.cdmsf_frame0;
- azt_Play.end.min = msf.cdmsf_min1;
- azt_Play.end.sec = msf.cdmsf_sec1;
- azt_Play.end.frame = msf.cdmsf_frame1;
-#ifdef AZT_DEBUG
- printk("aztcd play: %02x:%02x.%02x to %02x:%02x.%02x\n",
- azt_Play.start.min, azt_Play.start.sec,
- azt_Play.start.frame, azt_Play.end.min,
- azt_Play.end.sec, azt_Play.end.frame);
-#endif
- i = aztPlay(&azt_Play);
- if (i < 0) {
- aztAudioStatus = CDROM_AUDIO_ERROR;
- return -EIO;
- }
- aztAudioStatus = CDROM_AUDIO_PLAY;
- break;
-
- case CDROMREADTOCHDR: /* Read the table of contents header */
- tocHdr.cdth_trk0 = DiskInfo.first;
- tocHdr.cdth_trk1 = DiskInfo.last;
- if (copy_to_user(argp, &tocHdr, sizeof tocHdr))
- return -EFAULT;
- break;
- case CDROMREADTOCENTRY: /* Read an entry in the table of contents */
- if (copy_from_user(&entry, argp, sizeof entry))
- return -EFAULT;
- if ((!aztTocUpToDate) || aztDiskChanged)
- aztUpdateToc();
- if (entry.cdte_track == CDROM_LEADOUT)
- tocPtr = &Toc[DiskInfo.last + 1];
- else if (entry.cdte_track > DiskInfo.last
- || entry.cdte_track < DiskInfo.first) {
- return -EINVAL;
- } else
- tocPtr = &Toc[entry.cdte_track];
- entry.cdte_adr = tocPtr->ctrl_addr;
- entry.cdte_ctrl = tocPtr->ctrl_addr >> 4;
- if (entry.cdte_format == CDROM_LBA)
- entry.cdte_addr.lba =
- azt_msf2hsg(&tocPtr->diskTime);
- else if (entry.cdte_format == CDROM_MSF) {
- entry.cdte_addr.msf.minute =
- azt_bcd2bin(tocPtr->diskTime.min);
- entry.cdte_addr.msf.second =
- azt_bcd2bin(tocPtr->diskTime.sec);
- entry.cdte_addr.msf.frame =
- azt_bcd2bin(tocPtr->diskTime.frame);
- } else {
- return -EINVAL;
- }
- if (copy_to_user(argp, &entry, sizeof entry))
- return -EFAULT;
- break;
- case CDROMSUBCHNL: /* Get subchannel info */
- if (copy_from_user
- (&subchnl, argp, sizeof(struct cdrom_subchnl)))
- return -EFAULT;
- if (aztGetQChannelInfo(&qInfo) < 0) {
-#ifdef AZT_DEBUG
- printk
- ("aztcd: exiting aztcd_ioctl - Error 3 - Command:%x\n",
- cmd);
-#endif
- return -EIO;
- }
- subchnl.cdsc_audiostatus = aztAudioStatus;
- subchnl.cdsc_adr = qInfo.ctrl_addr;
- subchnl.cdsc_ctrl = qInfo.ctrl_addr >> 4;
- subchnl.cdsc_trk = azt_bcd2bin(qInfo.track);
- subchnl.cdsc_ind = azt_bcd2bin(qInfo.pointIndex);
- if (subchnl.cdsc_format == CDROM_LBA) {
- subchnl.cdsc_absaddr.lba =
- azt_msf2hsg(&qInfo.diskTime);
- subchnl.cdsc_reladdr.lba =
- azt_msf2hsg(&qInfo.trackTime);
- } else { /*default */
- subchnl.cdsc_format = CDROM_MSF;
- subchnl.cdsc_absaddr.msf.minute =
- azt_bcd2bin(qInfo.diskTime.min);
- subchnl.cdsc_absaddr.msf.second =
- azt_bcd2bin(qInfo.diskTime.sec);
- subchnl.cdsc_absaddr.msf.frame =
- azt_bcd2bin(qInfo.diskTime.frame);
- subchnl.cdsc_reladdr.msf.minute =
- azt_bcd2bin(qInfo.trackTime.min);
- subchnl.cdsc_reladdr.msf.second =
- azt_bcd2bin(qInfo.trackTime.sec);
- subchnl.cdsc_reladdr.msf.frame =
- azt_bcd2bin(qInfo.trackTime.frame);
- }
- if (copy_to_user(argp, &subchnl, sizeof(struct cdrom_subchnl)))
- return -EFAULT;
- break;
- case CDROMVOLCTRL: /* Volume control
- * With my Aztech CD268-01A volume control does not work, I can only
- turn the channels on (any value !=0) or off (value==0). Maybe it
- works better with your drive */
- if (copy_from_user(&volctrl, argp, sizeof(volctrl)))
- return -EFAULT;
- azt_Play.start.min = 0x21;
- azt_Play.start.sec = 0x84;
- azt_Play.start.frame = volctrl.channel0;
- azt_Play.end.min = volctrl.channel1;
- azt_Play.end.sec = volctrl.channel2;
- azt_Play.end.frame = volctrl.channel3;
- sendAztCmd(ACMD_SET_VOLUME, &azt_Play);
- STEN_LOW_WAIT;
- break;
- case CDROMEJECT:
- aztUnlockDoor(); /* Assume user knows what they're doing */
- /* all drives can at least stop! */
- if (aztAudioStatus == CDROM_AUDIO_PLAY) {
- if (aztSendCmd(ACMD_STOP))
- RETURNM("azt_ioctl 10", -1);
- STEN_LOW_WAIT;
- }
- if (aztSendCmd(ACMD_EJECT))
- RETURNM("azt_ioctl 11", -1);
- STEN_LOW_WAIT;
- aztAudioStatus = CDROM_AUDIO_NO_STATUS;
- break;
- case CDROMEJECT_SW:
- azt_auto_eject = (char) arg;
- break;
- case CDROMRESET:
- outb(ACMD_SOFT_RESET, CMD_PORT); /*send reset */
- STEN_LOW;
- if (inb(DATA_PORT) != AFL_OP_OK) { /*OP_OK? */
- printk
- ("aztcd: AZTECH CD-ROM drive does not respond\n");
- }
- break;
-/*Take care, the following code is not compatible with other CD-ROM drivers,
- use it at your own risk with cdplay.c. Set AZT_PRIVATE_IOCTLS to 0 in aztcd.h,
- if you do not want to use it!
-*/
-#if AZT_PRIVATE_IOCTLS
- case CDROMREADCOOKED: /*read data in mode 1 (2048 Bytes) */
- case CDROMREADRAW: /*read data in mode 2 (2336 Bytes) */
- {
- if (copy_from_user(&msf, argp, sizeof msf))
- return -EFAULT;
- /* convert to bcd */
- azt_bin2bcd(&msf.cdmsf_min0);
- azt_bin2bcd(&msf.cdmsf_sec0);
- azt_bin2bcd(&msf.cdmsf_frame0);
- msf.cdmsf_min1 = 0;
- msf.cdmsf_sec1 = 0;
- msf.cdmsf_frame1 = 1; /*read only one frame */
- azt_Play.start.min = msf.cdmsf_min0;
- azt_Play.start.sec = msf.cdmsf_sec0;
- azt_Play.start.frame = msf.cdmsf_frame0;
- azt_Play.end.min = msf.cdmsf_min1;
- azt_Play.end.sec = msf.cdmsf_sec1;
- azt_Play.end.frame = msf.cdmsf_frame1;
- if (cmd == CDROMREADRAW) {
- if (DiskInfo.xa) {
- return -1; /*XA Disks can't be read raw */
- } else {
- if (sendAztCmd(ACMD_PLAY_READ_RAW, &azt_Play))
- return -1;
- DTEN_LOW;
- insb(DATA_PORT, buf, CD_FRAMESIZE_RAW);
- if (copy_to_user(argp, &buf, CD_FRAMESIZE_RAW))
- return -EFAULT;
- }
- } else
- /*CDROMREADCOOKED*/ {
- if (sendAztCmd(ACMD_PLAY_READ, &azt_Play))
- return -1;
- DTEN_LOW;
- insb(DATA_PORT, buf, CD_FRAMESIZE);
- if (copy_to_user(argp, &buf, CD_FRAMESIZE))
- return -EFAULT;
- }
- }
- break;
- case CDROMSEEK: /*seek msf address */
- if (copy_from_user(&msf, argp, sizeof msf))
- return -EFAULT;
- /* convert to bcd */
- azt_bin2bcd(&msf.cdmsf_min0);
- azt_bin2bcd(&msf.cdmsf_sec0);
- azt_bin2bcd(&msf.cdmsf_frame0);
- azt_Play.start.min = msf.cdmsf_min0;
- azt_Play.start.sec = msf.cdmsf_sec0;
- azt_Play.start.frame = msf.cdmsf_frame0;
- if (aztSeek(&azt_Play))
- return -1;
- break;
-#endif /*end of incompatible code */
- case CDROMREADMODE1: /*set read data in mode 1 */
- return aztSetDiskType(AZT_MODE_1);
- case CDROMREADMODE2: /*set read data in mode 2 */
- return aztSetDiskType(AZT_MODE_2);
- default:
- return -EINVAL;
- }
-#ifdef AZT_DEBUG
- printk("aztcd: exiting aztcd_ioctl Command:%x Time:%li\n", cmd,
- jiffies);
-#endif
- return 0;
-}
-
-/*
- * Take care of the different block sizes between cdrom and Linux.
- * When Linux gets variable block sizes this will probably go away.
- */
-static void azt_transfer(void)
-{
-#ifdef AZT_TEST
- printk("aztcd: executing azt_transfer Time:%li\n", jiffies);
-#endif
- if (!current_valid())
- return;
-
- while (CURRENT->nr_sectors) {
- int bn = CURRENT->sector / 4;
- int i;
- for (i = 0; i < AZT_BUF_SIZ && azt_buf_bn[i] != bn; ++i);
- if (i < AZT_BUF_SIZ) {
- int offs = (i * 4 + (CURRENT->sector & 3)) * 512;
- int nr_sectors = 4 - (CURRENT->sector & 3);
- if (azt_buf_out != i) {
- azt_buf_out = i;
- if (azt_buf_bn[i] != bn) {
- azt_buf_out = -1;
- continue;
- }
- }
- if (nr_sectors > CURRENT->nr_sectors)
- nr_sectors = CURRENT->nr_sectors;
- memcpy(CURRENT->buffer, azt_buf + offs,
- nr_sectors * 512);
- CURRENT->nr_sectors -= nr_sectors;
- CURRENT->sector += nr_sectors;
- CURRENT->buffer += nr_sectors * 512;
- } else {
- azt_buf_out = -1;
- break;
- }
- }
-}
-
-static void do_aztcd_request(request_queue_t * q)
-{
-#ifdef AZT_TEST
- printk(" do_aztcd_request(%ld+%ld) Time:%li\n", CURRENT->sector,
- CURRENT->nr_sectors, jiffies);
-#endif
- if (DiskInfo.audio) {
- printk("aztcd: Error, tried to mount an Audio CD\n");
- end_request(CURRENT, 0);
- return;
- }
- azt_transfer_is_active = 1;
- while (current_valid()) {
- azt_transfer();
- if (CURRENT->nr_sectors == 0) {
- end_request(CURRENT, 1);
- } else {
- azt_buf_out = -1; /* Want to read a block not in buffer */
- if (azt_state == AZT_S_IDLE) {
- if ((!aztTocUpToDate) || aztDiskChanged) {
- if (aztUpdateToc() < 0) {
- while (current_valid())
- end_request(CURRENT, 0);
- break;
- }
- }
- azt_state = AZT_S_START;
- AztTries = 5;
- SET_TIMER(azt_poll, HZ / 100);
- }
- break;
- }
- }
- azt_transfer_is_active = 0;
-#ifdef AZT_TEST2
- printk
- ("azt_next_bn:%x azt_buf_in:%x azt_buf_out:%x azt_buf_bn:%x\n",
- azt_next_bn, azt_buf_in, azt_buf_out, azt_buf_bn[azt_buf_in]);
- printk(" do_aztcd_request ends Time:%li\n", jiffies);
-#endif
-}
-
-
-static void azt_invalidate_buffers(void)
-{
- int i;
-
-#ifdef AZT_DEBUG
- printk("aztcd: executing azt_invalidate_buffers\n");
-#endif
- for (i = 0; i < AZT_BUF_SIZ; ++i)
- azt_buf_bn[i] = -1;
- azt_buf_out = -1;
-}
-
-/*
- * Open the device special file. Check that a disk is in.
- */
-static int aztcd_open(struct inode *ip, struct file *fp)
-{
- int st;
-
-#ifdef AZT_DEBUG
- printk("aztcd: starting aztcd_open\n");
-#endif
-
- if (aztPresent == 0)
- return -ENXIO; /* no hardware */
-
- if (!azt_open_count && azt_state == AZT_S_IDLE) {
- azt_invalidate_buffers();
-
- st = getAztStatus(); /* check drive status */
- if (st == -1)
- goto err_out; /* drive doesn't respond */
-
- if (st & AST_DOOR_OPEN) { /* close door, then get the status again. */
- printk("aztcd: Door Open?\n");
- aztCloseDoor();
- st = getAztStatus();
- }
-
- if ((st & AST_NOT_READY) || (st & AST_DSK_CHG)) { /*no disk in drive or changed */
- printk
- ("aztcd: Disk Changed or No Disk in Drive?\n");
- aztTocUpToDate = 0;
- }
- if (aztUpdateToc())
- goto err_out;
-
- }
- ++azt_open_count;
- aztLockDoor();
-
-#ifdef AZT_DEBUG
- printk("aztcd: exiting aztcd_open\n");
-#endif
- return 0;
-
- err_out:
- return -EIO;
-}
-
-
-/*
- * On close, we flush all azt blocks from the buffer cache.
- */
-static int aztcd_release(struct inode *inode, struct file *file)
-{
-#ifdef AZT_DEBUG
- printk("aztcd: executing aztcd_release\n");
- printk("inode: %p, device: %s file: %p\n", inode,
- inode->i_bdev->bd_disk->disk_name, file);
-#endif
- if (!--azt_open_count) {
- azt_invalidate_buffers();
- aztUnlockDoor();
- if (azt_auto_eject)
- aztSendCmd(ACMD_EJECT);
- CLEAR_TIMER;
- }
- return 0;
-}
-
-static struct gendisk *azt_disk;
-
-/*
- * Test for presence of drive and initialize it. Called at boot time.
- */
-
-static int __init aztcd_init(void)
-{
- long int count, max_count;
- unsigned char result[50];
- int st;
- void* status = NULL;
- int i = 0;
- int ret = 0;
-
- if (azt_port == 0) {
- printk(KERN_INFO "aztcd: no Aztech CD-ROM Initialization");
- return -EIO;
- }
-
- printk(KERN_INFO "aztcd: AZTECH, ORCHID, OKANO, WEARNES, TXC, CyDROM "
- "CD-ROM Driver\n");
- printk(KERN_INFO "aztcd: (C) 1994-98 W.Zimmermann\n");
- if (azt_port == -1) {
- printk
- ("aztcd: DriverVersion=%s For IDE/ATAPI-drives use ide-cd.c\n",
- AZT_VERSION);
- } else
- printk
- ("aztcd: DriverVersion=%s BaseAddress=0x%x For IDE/ATAPI-drives use ide-cd.c\n",
- AZT_VERSION, azt_port);
- printk(KERN_INFO "aztcd: If you have problems, read /usr/src/linux/"
- "Documentation/cdrom/aztcd\n");
-
-
-#ifdef AZT_SW32 /*CDROM connected to Soundwave32 card */
- if ((0xFF00 & inw(AZT_SW32_ID_REG)) != 0x4500) {
- printk
- ("aztcd: no Soundwave32 card detected at base:%x init:%x config:%x id:%x\n",
- AZT_SW32_BASE_ADDR, AZT_SW32_INIT,
- AZT_SW32_CONFIG_REG, AZT_SW32_ID_REG);
- return -EIO;
- } else {
- printk(KERN_INFO
- "aztcd: Soundwave32 card detected at %x Version %x\n",
- AZT_SW32_BASE_ADDR, inw(AZT_SW32_ID_REG));
- outw(AZT_SW32_INIT, AZT_SW32_CONFIG_REG);
- for (count = 0; count < 10000; count++); /*delay a bit */
- }
-#endif
-
- /* check for presence of drive */
-
- if (azt_port == -1) { /* autoprobing for proprietary interface */
- for (i = 0; (azt_port_auto[i] != 0) && (i < 16); i++) {
- azt_port = azt_port_auto[i];
- printk(KERN_INFO "aztcd: Autoprobing BaseAddress=0x%x"
- "\n", azt_port);
- /*proprietary interfaces need 4 bytes */
- if (!request_region(azt_port, 4, "aztcd")) {
- continue;
- }
- outb(POLLED, MODE_PORT);
- inb(CMD_PORT);
- inb(CMD_PORT);
- outb(ACMD_GET_VERSION, CMD_PORT); /*Try to get version info */
-
- aztTimeOutCount = 0;
- do {
- aztIndatum = inb(STATUS_PORT);
- aztTimeOutCount++;
- if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
- break;
- } while (aztIndatum & AFL_STATUS);
- if (inb(DATA_PORT) == AFL_OP_OK) { /* OK drive found */
- break;
- }
- else { /* Drive not found on this port - try next one */
- release_region(azt_port, 4);
- }
- }
- if ((i == 16) || (azt_port_auto[i] == 0)) {
- printk(KERN_INFO "aztcd: no AZTECH CD-ROM drive found\n");
- return -EIO;
- }
- } else { /* no autoprobing */
- if ((azt_port == 0x1f0) || (azt_port == 0x170))
- status = request_region(azt_port, 8, "aztcd"); /*IDE-interfaces need 8 bytes */
- else
- status = request_region(azt_port, 4, "aztcd"); /*proprietary interfaces need 4 bytes */
- if (!status) {
- printk(KERN_WARNING "aztcd: conflict, I/O port (%X) "
- "already used\n", azt_port);
- return -EIO;
- }
-
- if ((azt_port == 0x1f0) || (azt_port == 0x170))
- SWITCH_IDE_SLAVE; /*switch IDE interface to slave configuration */
-
- outb(POLLED, MODE_PORT);
- inb(CMD_PORT);
- inb(CMD_PORT);
- outb(ACMD_GET_VERSION, CMD_PORT); /*Try to get version info */
-
- aztTimeOutCount = 0;
- do {
- aztIndatum = inb(STATUS_PORT);
- aztTimeOutCount++;
- if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
- break;
- } while (aztIndatum & AFL_STATUS);
-
- if (inb(DATA_PORT) != AFL_OP_OK) { /*OP_OK? If not, reset and try again */
-#ifndef MODULE
- if (azt_cont != 0x79) {
- printk(KERN_WARNING "aztcd: no AZTECH CD-ROM "
- "drive found-Try boot parameter aztcd="
- "<BaseAddress>,0x79\n");
- ret = -EIO;
- goto err_out;
- }
-#else
- if (0) {
- }
-#endif
- else {
- printk(KERN_INFO "aztcd: drive reset - "
- "please wait\n");
- for (count = 0; count < 50; count++) {
- inb(STATUS_PORT); /*removing all data from earlier tries */
- inb(DATA_PORT);
- }
- outb(POLLED, MODE_PORT);
- inb(CMD_PORT);
- inb(CMD_PORT);
- getAztStatus(); /*trap errors */
- outb(ACMD_SOFT_RESET, CMD_PORT); /*send reset */
- STEN_LOW;
- if (inb(DATA_PORT) != AFL_OP_OK) { /*OP_OK? */
- printk(KERN_WARNING "aztcd: no AZTECH "
- "CD-ROM drive found\n");
- ret = -EIO;
- goto err_out;
- }
-
- for (count = 0; count < AZT_TIMEOUT;
- count++)
- barrier(); /* Stop gcc 2.96 being smart */
- /* use udelay(), damnit -- AV */
-
- if ((st = getAztStatus()) == -1) {
- printk(KERN_WARNING "aztcd: Drive Status"
- " Error Status=%x\n", st);
- ret = -EIO;
- goto err_out;
- }
-#ifdef AZT_DEBUG
- printk(KERN_DEBUG "aztcd: Status = %x\n", st);
-#endif
- outb(POLLED, MODE_PORT);
- inb(CMD_PORT);
- inb(CMD_PORT);
- outb(ACMD_GET_VERSION, CMD_PORT); /*GetVersion */
- STEN_LOW;
- OP_OK;
- }
- }
- }
-
- azt_init_end = 1;
- STEN_LOW;
- result[0] = inb(DATA_PORT); /*reading in a null byte??? */
- for (count = 1; count < 50; count++) { /*Reading version string */
- aztTimeOutCount = 0; /*here we must implement STEN_LOW differently */
- do {
- aztIndatum = inb(STATUS_PORT); /*because we want to exit by timeout */
- aztTimeOutCount++;
- if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
- break;
- } while (aztIndatum & AFL_STATUS);
- if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
- break; /*all chars read? */
- result[count] = inb(DATA_PORT);
- }
- if (count > 30)
- max_count = 30; /*print max.30 chars of the version string */
- else
- max_count = count;
- printk(KERN_INFO "aztcd: FirmwareVersion=");
- for (count = 1; count < max_count; count++)
- printk("%c", result[count]);
- printk("<<>> ");
-
- if ((result[1] == 'A') && (result[2] == 'Z') && (result[3] == 'T')) {
- printk("AZTECH drive detected\n");
- /*AZTECH*/}
- else if ((result[2] == 'C') && (result[3] == 'D')
- && (result[4] == 'D')) {
- printk("ORCHID or WEARNES drive detected\n"); /*ORCHID or WEARNES */
- } else if ((result[1] == 0x03) && (result[2] == '5')) {
- printk("TXC or CyCDROM drive detected\n"); /*Conrad TXC, CyCDROM */
- } else { /*OTHERS or none */
- printk("\nunknown drive or firmware version detected\n");
- printk
- ("aztcd may not run stable, if you want to try anyhow,\n");
- printk("boot with: aztcd=<BaseAddress>,0x79\n");
- if ((azt_cont != 0x79)) {
- printk("aztcd: FirmwareVersion=");
- for (count = 1; count < 5; count++)
- printk("%c", result[count]);
- printk("<<>> ");
- printk("Aborted\n");
- ret = -EIO;
- goto err_out;
- }
- }
- azt_disk = alloc_disk(1);
- if (!azt_disk)
- goto err_out;
-
- if (register_blkdev(MAJOR_NR, "aztcd")) {
- ret = -EIO;
- goto err_out2;
- }
-
- azt_queue = blk_init_queue(do_aztcd_request, &aztSpin);
- if (!azt_queue) {
- ret = -ENOMEM;
- goto err_out3;
- }
-
- blk_queue_hardsect_size(azt_queue, 2048);
- azt_disk->major = MAJOR_NR;
- azt_disk->first_minor = 0;
- azt_disk->fops = &azt_fops;
- sprintf(azt_disk->disk_name, "aztcd");
- azt_disk->queue = azt_queue;
- add_disk(azt_disk);
- azt_invalidate_buffers();
- aztPresent = 1;
- aztCloseDoor();
- return 0;
-err_out3:
- unregister_blkdev(MAJOR_NR, "aztcd");
-err_out2:
- put_disk(azt_disk);
-err_out:
- if ((azt_port == 0x1f0) || (azt_port == 0x170)) {
- SWITCH_IDE_MASTER;
- release_region(azt_port, 8); /*IDE-interface */
- } else
- release_region(azt_port, 4); /*proprietary interface */
- return ret;
-
-}
-
-static void __exit aztcd_exit(void)
-{
- del_gendisk(azt_disk);
- put_disk(azt_disk);
- if ((unregister_blkdev(MAJOR_NR, "aztcd") == -EINVAL)) {
- printk("What's that: can't unregister aztcd\n");
- return;
- }
- blk_cleanup_queue(azt_queue);
- if ((azt_port == 0x1f0) || (azt_port == 0x170)) {
- SWITCH_IDE_MASTER;
- release_region(azt_port, 8); /*IDE-interface */
- } else
- release_region(azt_port, 4); /*proprietary interface */
- printk(KERN_INFO "aztcd module released.\n");
-}
-
-module_init(aztcd_init);
-module_exit(aztcd_exit);
-
-/*##########################################################################
- Aztcd State Machine: Controls Drive Operating State
- ##########################################################################
-*/
-static void azt_poll(void)
-{
- int st = 0;
- int loop_ctl = 1;
- int skip = 0;
-
- if (azt_error) {
- if (aztSendCmd(ACMD_GET_ERROR))
- RETURN("azt_poll 1");
- STEN_LOW;
- azt_error = inb(DATA_PORT) & 0xFF;
- printk("aztcd: I/O error 0x%02x\n", azt_error);
- azt_invalidate_buffers();
-#ifdef WARN_IF_READ_FAILURE
- if (AztTries == 5)
- printk
- ("aztcd: Read of Block %d Failed - Maybe Audio Disk?\n",
- azt_next_bn);
-#endif
- if (!AztTries--) {
- printk
- ("aztcd: Read of Block %d Failed, Maybe Audio Disk? Giving up\n",
- azt_next_bn);
- if (azt_transfer_is_active) {
- AztTries = 0;
- loop_ctl = 0;
- }
- if (current_valid())
- end_request(CURRENT, 0);
- AztTries = 5;
- }
- azt_error = 0;
- azt_state = AZT_S_STOP;
- }
-
- while (loop_ctl) {
- loop_ctl = 0; /* each case must flip this back to 1 if we want
- to come back up here */
- switch (azt_state) {
-
- case AZT_S_IDLE:
-#ifdef AZT_TEST3
- if (azt_state != azt_state_old) {
- azt_state_old = azt_state;
- printk("AZT_S_IDLE\n");
- }
-#endif
- return;
-
- case AZT_S_START:
-#ifdef AZT_TEST3
- if (azt_state != azt_state_old) {
- azt_state_old = azt_state;
- printk("AZT_S_START\n");
- }
-#endif
- if (aztSendCmd(ACMD_GET_STATUS))
- RETURN("azt_poll 2"); /*result will be checked by aztStatus() */
- azt_state =
- azt_mode == 1 ? AZT_S_READ : AZT_S_MODE;
- AztTimeout = 3000;
- break;
-
- case AZT_S_MODE:
-#ifdef AZT_TEST3
- if (azt_state != azt_state_old) {
- azt_state_old = azt_state;
- printk("AZT_S_MODE\n");
- }
-#endif
- if (!skip) {
- if ((st = aztStatus()) != -1) {
- if ((st & AST_DSK_CHG)
- || (st & AST_NOT_READY)) {
- aztDiskChanged = 1;
- aztTocUpToDate = 0;
- azt_invalidate_buffers();
- end_request(CURRENT, 0);
- printk
- ("aztcd: Disk Changed or Not Ready 1 - Unmount Disk!\n");
- }
- } else
- break;
- }
- skip = 0;
-
- if ((st & AST_DOOR_OPEN) || (st & AST_NOT_READY)) {
- aztDiskChanged = 1;
- aztTocUpToDate = 0;
- printk
- ("aztcd: Disk Changed or Not Ready 2 - Unmount Disk!\n");
- end_request(CURRENT, 0);
- printk((st & AST_DOOR_OPEN) ?
- "aztcd: door open\n" :
- "aztcd: disk removed\n");
- if (azt_transfer_is_active) {
- azt_state = AZT_S_START;
- loop_ctl = 1; /* goto immediately */
- break;
- }
- azt_state = AZT_S_IDLE;
- while (current_valid())
- end_request(CURRENT, 0);
- return;
- }
-
-/* if (aztSendCmd(ACMD_SET_MODE)) RETURN("azt_poll 3");
- outb(0x01, DATA_PORT);
- PA_OK;
- STEN_LOW;
-*/
- if (aztSendCmd(ACMD_GET_STATUS))
- RETURN("azt_poll 4");
- STEN_LOW;
- azt_mode = 1;
- azt_state = AZT_S_READ;
- AztTimeout = 3000;
-
- break;
-
-
- case AZT_S_READ:
-#ifdef AZT_TEST3
- if (azt_state != azt_state_old) {
- azt_state_old = azt_state;
- printk("AZT_S_READ\n");
- }
-#endif
- if (!skip) {
- if ((st = aztStatus()) != -1) {
- if ((st & AST_DSK_CHG)
- || (st & AST_NOT_READY)) {
- aztDiskChanged = 1;
- aztTocUpToDate = 0;
- azt_invalidate_buffers();
- printk
- ("aztcd: Disk Changed or Not Ready 3 - Unmount Disk!\n");
- end_request(CURRENT, 0);
- }
- } else
- break;
- }
-
- skip = 0;
- if ((st & AST_DOOR_OPEN) || (st & AST_NOT_READY)) {
- aztDiskChanged = 1;
- aztTocUpToDate = 0;
- printk((st & AST_DOOR_OPEN) ?
- "aztcd: door open\n" :
- "aztcd: disk removed\n");
- if (azt_transfer_is_active) {
- azt_state = AZT_S_START;
- loop_ctl = 1;
- break;
- }
- azt_state = AZT_S_IDLE;
- while (current_valid())
- end_request(CURRENT, 0);
- return;
- }
-
- if (current_valid()) {
- struct azt_Play_msf msf;
- int i;
- azt_next_bn = CURRENT->sector / 4;
- azt_hsg2msf(azt_next_bn, &msf.start);
- i = 0;
- /* find out in which track we are */
- while (azt_msf2hsg(&msf.start) >
- azt_msf2hsg(&Toc[++i].trackTime)) {
- };
- if (azt_msf2hsg(&msf.start) <
- azt_msf2hsg(&Toc[i].trackTime) -
- AZT_BUF_SIZ) {
- azt_read_count = AZT_BUF_SIZ; /*fast, because we read ahead */
- /*azt_read_count=CURRENT->nr_sectors; slow, no read ahead */
- } else /* don't read beyond end of track */
-#if AZT_MULTISESSION
- {
- azt_read_count =
- (azt_msf2hsg(&Toc[i].trackTime)
- / 4) * 4 -
- azt_msf2hsg(&msf.start);
- if (azt_read_count < 0)
- azt_read_count = 0;
- if (azt_read_count > AZT_BUF_SIZ)
- azt_read_count =
- AZT_BUF_SIZ;
- printk
- ("aztcd: warning - trying to read beyond end of track\n");
-/* printk("%i %i %li %li\n",i,azt_read_count,azt_msf2hsg(&msf.start),azt_msf2hsg(&Toc[i].trackTime));
-*/ }
-#else
- {
- azt_read_count = AZT_BUF_SIZ;
- }
-#endif
- msf.end.min = 0;
- msf.end.sec = 0;
- msf.end.frame = azt_read_count; /*Mitsumi here reads 0xffffff sectors */
-#ifdef AZT_TEST3
- printk
- ("---reading msf-address %x:%x:%x %x:%x:%x\n",
- msf.start.min, msf.start.sec,
- msf.start.frame, msf.end.min,
- msf.end.sec, msf.end.frame);
- printk
- ("azt_next_bn:%x azt_buf_in:%x azt_buf_out:%x azt_buf_bn:%x\n",
- azt_next_bn, azt_buf_in, azt_buf_out,
- azt_buf_bn[azt_buf_in]);
-#endif
- if (azt_read_mode == AZT_MODE_2) {
- sendAztCmd(ACMD_PLAY_READ_RAW, &msf); /*XA disks in raw mode */
- } else {
- sendAztCmd(ACMD_PLAY_READ, &msf); /*others in cooked mode */
- }
- azt_state = AZT_S_DATA;
- AztTimeout = READ_TIMEOUT;
- } else {
- azt_state = AZT_S_STOP;
- loop_ctl = 1;
- break;
- }
-
- break;
-
-
- case AZT_S_DATA:
-#ifdef AZT_TEST3
- if (azt_state != azt_state_old) {
- azt_state_old = azt_state;
- printk("AZT_S_DATA\n");
- }
-#endif
-
- st = inb(STATUS_PORT) & AFL_STATUSorDATA;
-
- switch (st) {
-
- case AFL_DATA:
-#ifdef AZT_TEST3
- if (st != azt_st_old) {
- azt_st_old = st;
- printk("---AFL_DATA st:%x\n", st);
- }
-#endif
- if (!AztTries--) {
- printk
- ("aztcd: Read of Block %d Failed, Maybe Audio Disk ? Giving up\n",
- azt_next_bn);
- if (azt_transfer_is_active) {
- AztTries = 0;
- break;
- }
- if (current_valid())
- end_request(CURRENT, 0);
- AztTries = 5;
- }
- azt_state = AZT_S_START;
- AztTimeout = READ_TIMEOUT;
- loop_ctl = 1;
- break;
-
- case AFL_STATUSorDATA:
-#ifdef AZT_TEST3
- if (st != azt_st_old) {
- azt_st_old = st;
- printk
- ("---AFL_STATUSorDATA st:%x\n",
- st);
- }
-#endif
- break;
-
- default:
-#ifdef AZT_TEST3
- if (st != azt_st_old) {
- azt_st_old = st;
- printk("---default: st:%x\n", st);
- }
-#endif
- AztTries = 5;
- if (!current_valid() && azt_buf_in == azt_buf_out) {
- azt_state = AZT_S_STOP;
- loop_ctl = 1;
- break;
- }
- if (azt_read_count <= 0)
- printk
- ("aztcd: warning - try to read 0 frames\n");
- while (azt_read_count) { /*??? fast read ahead loop */
- azt_buf_bn[azt_buf_in] = -1;
- DTEN_LOW; /*??? unsolved problem, very
- seldom we get timeouts
- here, don't now the real
- reason. With my drive this
- sometimes also happens with
- Aztech's original driver under
- DOS. Is it a hardware bug?
- I tried to recover from such
- situations here. Zimmermann */
- if (aztTimeOutCount >= AZT_TIMEOUT) {
- printk
- ("read_count:%d CURRENT->nr_sectors:%ld azt_buf_in:%d\n",
- azt_read_count,
- CURRENT->nr_sectors,
- azt_buf_in);
- printk
- ("azt_transfer_is_active:%x\n",
- azt_transfer_is_active);
- azt_read_count = 0;
- azt_state = AZT_S_STOP;
- loop_ctl = 1;
- end_request(CURRENT, 1); /*should we have here (1) or (0)? */
- } else {
- if (azt_read_mode ==
- AZT_MODE_2) {
- insb(DATA_PORT,
- azt_buf +
- CD_FRAMESIZE_RAW
- * azt_buf_in,
- CD_FRAMESIZE_RAW);
- } else {
- insb(DATA_PORT,
- azt_buf +
- CD_FRAMESIZE *
- azt_buf_in,
- CD_FRAMESIZE);
- }
- azt_read_count--;
-#ifdef AZT_TEST3
- printk
- ("AZT_S_DATA; ---I've read data- read_count: %d\n",
- azt_read_count);
- printk
- ("azt_next_bn:%d azt_buf_in:%d azt_buf_out:%d azt_buf_bn:%d\n",
- azt_next_bn,
- azt_buf_in,
- azt_buf_out,
- azt_buf_bn
- [azt_buf_in]);
-#endif
- azt_buf_bn[azt_buf_in] =
- azt_next_bn++;
- if (azt_buf_out == -1)
- azt_buf_out =
- azt_buf_in;
- azt_buf_in =
- azt_buf_in + 1 ==
- AZT_BUF_SIZ ? 0 :
- azt_buf_in + 1;
- }
- }
- if (!azt_transfer_is_active) {
- while (current_valid()) {
- azt_transfer();
- if (CURRENT->nr_sectors ==
- 0)
- end_request(CURRENT, 1);
- else
- break;
- }
- }
-
- if (current_valid()
- && (CURRENT->sector / 4 < azt_next_bn
- || CURRENT->sector / 4 >
- azt_next_bn + AZT_BUF_SIZ)) {
- azt_state = AZT_S_STOP;
- loop_ctl = 1;
- break;
- }
- AztTimeout = READ_TIMEOUT;
- if (azt_read_count == 0) {
- azt_state = AZT_S_STOP;
- loop_ctl = 1;
- break;
- }
- break;
- }
- break;
-
-
- case AZT_S_STOP:
-#ifdef AZT_TEST3
- if (azt_state != azt_state_old) {
- azt_state_old = azt_state;
- printk("AZT_S_STOP\n");
- }
-#endif
- if (azt_read_count != 0)
- printk("aztcd: discard data=%x frames\n",
- azt_read_count);
- while (azt_read_count != 0) {
- int i;
- if (!(inb(STATUS_PORT) & AFL_DATA)) {
- if (azt_read_mode == AZT_MODE_2)
- for (i = 0;
- i < CD_FRAMESIZE_RAW;
- i++)
- inb(DATA_PORT);
- else
- for (i = 0;
- i < CD_FRAMESIZE; i++)
- inb(DATA_PORT);
- }
- azt_read_count--;
- }
- if (aztSendCmd(ACMD_GET_STATUS))
- RETURN("azt_poll 5");
- azt_state = AZT_S_STOPPING;
- AztTimeout = 1000;
- break;
-
- case AZT_S_STOPPING:
-#ifdef AZT_TEST3
- if (azt_state != azt_state_old) {
- azt_state_old = azt_state;
- printk("AZT_S_STOPPING\n");
- }
-#endif
-
- if ((st = aztStatus()) == -1 && AztTimeout)
- break;
-
- if ((st != -1)
- && ((st & AST_DSK_CHG)
- || (st & AST_NOT_READY))) {
- aztDiskChanged = 1;
- aztTocUpToDate = 0;
- azt_invalidate_buffers();
- printk
- ("aztcd: Disk Changed or Not Ready 4 - Unmount Disk!\n");
- end_request(CURRENT, 0);
- }
-
-#ifdef AZT_TEST3
- printk("CURRENT_VALID %d azt_mode %d\n",
- current_valid(), azt_mode);
-#endif
-
- if (current_valid()) {
- if (st != -1) {
- if (azt_mode == 1) {
- azt_state = AZT_S_READ;
- loop_ctl = 1;
- skip = 1;
- break;
- } else {
- azt_state = AZT_S_MODE;
- loop_ctl = 1;
- skip = 1;
- break;
- }
- } else {
- azt_state = AZT_S_START;
- AztTimeout = 1;
- }
- } else {
- azt_state = AZT_S_IDLE;
- return;
- }
- break;
-
- default:
- printk("aztcd: invalid state %d\n", azt_state);
- return;
- } /* case */
- } /* while */
-
-
- if (!AztTimeout--) {
- printk("aztcd: timeout in state %d\n", azt_state);
- azt_state = AZT_S_STOP;
- if (aztSendCmd(ACMD_STOP))
- RETURN("azt_poll 6");
- STEN_LOW_WAIT;
- };
-
- SET_TIMER(azt_poll, HZ / 100);
-}
-
-
-/*###########################################################################
- * Miscellaneous support functions
- ###########################################################################
-*/
-static void azt_hsg2msf(long hsg, struct msf *msf)
-{
- hsg += 150;
- msf->min = hsg / 4500;
- hsg %= 4500;
- msf->sec = hsg / 75;
- msf->frame = hsg % 75;
-#ifdef AZT_DEBUG
- if (msf->min >= 70)
- printk("aztcd: Error hsg2msf address Minutes\n");
- if (msf->sec >= 60)
- printk("aztcd: Error hsg2msf address Seconds\n");
- if (msf->frame >= 75)
- printk("aztcd: Error hsg2msf address Frames\n");
-#endif
- azt_bin2bcd(&msf->min); /* convert to BCD */
- azt_bin2bcd(&msf->sec);
- azt_bin2bcd(&msf->frame);
-}
-
-static long azt_msf2hsg(struct msf *mp)
-{
- return azt_bcd2bin(mp->frame) + azt_bcd2bin(mp->sec) * 75
- + azt_bcd2bin(mp->min) * 4500 - CD_MSF_OFFSET;
-}
-
-static void azt_bin2bcd(unsigned char *p)
-{
- int u, t;
-
- u = *p % 10;
- t = *p / 10;
- *p = u | (t << 4);
-}
-
-static int azt_bcd2bin(unsigned char bcd)
-{
- return (bcd >> 4) * 10 + (bcd & 0xF);
-}
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(AZTECH_CDROM_MAJOR);
diff --git a/drivers/cdrom/aztcd.h b/drivers/cdrom/aztcd.h
deleted file mode 100644
index 057501e31628..000000000000
--- a/drivers/cdrom/aztcd.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* $Id: aztcd.h,v 2.60 1997/11/29 09:51:22 root Exp root $
- *
- * Definitions for a AztechCD268 CD-ROM interface
- * Copyright (C) 1994-98 Werner Zimmermann
- *
- * based on Mitsumi CDROM driver by Martin Harriss
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * History: W.Zimmermann adaption to Aztech CD268-01A Version 1.3
- * October 1994 Email: Werner.Zimmermann@fht-esslingen.de
- */
-
-/* *** change this to set the I/O port address of your CD-ROM drive,
- set to '-1', if you want autoprobing */
-#define AZT_BASE_ADDR -1
-
-/* list of autoprobing addresses (not more than 15), last value must be 0x000
- Note: Autoprobing is only enabled, if AZT_BASE_ADDR is set to '-1' ! */
-#define AZT_BASE_AUTO { 0x320, 0x300, 0x310, 0x330, 0x000 }
-
-/* Uncomment this, if your CDROM is connected to a Soundwave32-soundcard
- and configure AZT_BASE_ADDR and AZT_SW32_BASE_ADDR */
-/*#define AZT_SW32 1
-*/
-
-#ifdef AZT_SW32
-#define AZT_SW32_BASE_ADDR 0x220 /*I/O port base address of your soundcard*/
-#endif
-
-/* Set this to 1, if you want your tray to be locked, set to 0 to prevent tray
- from locking */
-#define AZT_ALLOW_TRAY_LOCK 1
-
-/*Set this to 1 to allow auto-eject when unmounting a disk, set to 0, if you
- don't want the auto-eject feature*/
-#define AZT_AUTO_EJECT 0
-
-/*Set this to 1, if you want to use incompatible ioctls for reading in raw and
- cooked mode */
-#define AZT_PRIVATE_IOCTLS 1
-
-/*Set this to 1, if you want multisession support by the ISO fs. Even if you set
- this value to '0' you can use multisession CDs. In that case the drive's firm-
- ware will do the appropriate redirection automatically. The CD will then look
- like a single session CD (but nevertheless all data may be read). Please read
- chapter '5.1 Multisession support' in README.aztcd for details. Normally it's
- uncritical to leave this setting untouched */
-#define AZT_MULTISESSION 1
-
-/*Uncomment this, if you are using a linux kernel version prior to 2.1.0 */
-/*#define AZT_KERNEL_PRIOR_2_1 */
-
-/*---------------------------------------------------------------------------*/
-/*-----nothing to be configured for normal applications below this line------*/
-
-
-/* Increase this if you get lots of timeouts; if you get kernel panic, replace
- STEN_LOW_WAIT by STEN_LOW in the source code */
-#define AZT_STATUS_DELAY 400 /*for timer wait, STEN_LOW_WAIT*/
-#define AZT_TIMEOUT 8000000 /*for busy wait STEN_LOW, DTEN_LOW*/
-#define AZT_FAST_TIMEOUT 10000 /*for reading the version string*/
-
-/* number of times to retry a command before giving up */
-#define AZT_RETRY_ATTEMPTS 3
-
-/* port access macros */
-#define CMD_PORT azt_port
-#define DATA_PORT azt_port
-#define STATUS_PORT azt_port+1
-#define MODE_PORT azt_port+2
-#ifdef AZT_SW32
- #define AZT_SW32_INIT (unsigned int) (0xFF00 & (AZT_BASE_ADDR*16))
- #define AZT_SW32_CONFIG_REG AZT_SW32_BASE_ADDR+0x16 /*Soundwave32 Config. Register*/
- #define AZT_SW32_ID_REG AZT_SW32_BASE_ADDR+0x04 /*Soundwave32 ID Version Register*/
-#endif
-
-/* status bits */
-#define AST_CMD_CHECK 0x80 /* 1 = command error */
-#define AST_DOOR_OPEN 0x40 /* 1 = door is open */
-#define AST_NOT_READY 0x20 /* 1 = no disk in the drive */
-#define AST_DSK_CHG 0x02 /* 1 = disk removed or changed */
-#define AST_MODE 0x01 /* 0=MODE1, 1=MODE2 */
-#define AST_MODE_BITS 0x1C /* Mode Bits */
-#define AST_INITIAL 0x0C /* initial, only valid ... */
-#define AST_BUSY 0x04 /* now playing, only valid
- in combination with mode
- bits */
-/* flag bits */
-#define AFL_DATA 0x02 /* data available if low */
-#define AFL_STATUS 0x04 /* status available if low */
-#define AFL_OP_OK 0x01 /* OP_OK command correct*/
-#define AFL_PA_OK 0x02 /* PA_OK parameter correct*/
-#define AFL_OP_ERR 0x05 /* error in command*/
-#define AFL_PA_ERR 0x06 /* error in parameters*/
-#define POLLED 0x04 /* polled mode */
-
-/* commands */
-#define ACMD_SOFT_RESET 0x10 /* reset drive */
-#define ACMD_PLAY_READ 0x20 /* read data track in cooked mode */
-#define ACMD_PLAY_READ_RAW 0x21 /* reading in raw mode*/
-#define ACMD_SEEK 0x30 /* seek msf address*/
-#define ACMD_SEEK_TO_LEADIN 0x31 /* seek to leadin track*/
-#define ACMD_GET_ERROR 0x40 /* get error code */
-#define ACMD_GET_STATUS 0x41 /* get status */
-#define ACMD_GET_Q_CHANNEL 0x50 /* read info from q channel */
-#define ACMD_EJECT 0x60 /* eject/open tray */
-#define ACMD_CLOSE 0x61 /* close tray */
-#define ACMD_LOCK 0x71 /* lock tray closed */
-#define ACMD_UNLOCK 0x72 /* unlock tray */
-#define ACMD_PAUSE 0x80 /* pause */
-#define ACMD_STOP 0x81 /* stop play */
-#define ACMD_PLAY_AUDIO 0x90 /* play audio track */
-#define ACMD_SET_VOLUME 0x93 /* set audio level */
-#define ACMD_GET_VERSION 0xA0 /* get firmware version */
-#define ACMD_SET_DISK_TYPE 0xA1 /* set disk data mode */
-
-#define MAX_TRACKS 104
-
-struct msf {
- unsigned char min;
- unsigned char sec;
- unsigned char frame;
-};
-
-struct azt_Play_msf {
- struct msf start;
- struct msf end;
-};
-
-struct azt_DiskInfo {
- unsigned char first;
- unsigned char next;
- unsigned char last;
- struct msf diskLength;
- struct msf firstTrack;
- unsigned char multi;
- struct msf nextSession;
- struct msf lastSession;
- unsigned char xa;
- unsigned char audio;
-};
-
-struct azt_Toc {
- unsigned char ctrl_addr;
- unsigned char track;
- unsigned char pointIndex;
- struct msf trackTime;
- struct msf diskTime;
-};
diff --git a/drivers/cdrom/cdu31a.c b/drivers/cdrom/cdu31a.c
deleted file mode 100644
index 2157c58755e0..000000000000
--- a/drivers/cdrom/cdu31a.c
+++ /dev/null
@@ -1,3251 +0,0 @@
-/*
-* Sony CDU-31A CDROM interface device driver.
-*
-* Corey Minyard (minyard@wf-rch.cirr.com)
-*
-* Colossians 3:17
-*
-* See Documentation/cdrom/cdu31a for additional details about this driver.
-*
-* The Sony interface device driver handles Sony interface CDROM
-* drives and provides a complete block-level interface as well as an
-* ioctl() interface compatible with the Sun (as specified in
-* include/linux/cdrom.h). With this interface, CDROMs can be
-* accessed and standard audio CDs can be played back normally.
-*
-* WARNING - All autoprobes have been removed from the driver.
-* You MUST configure the CDU31A via a LILO config
-* at boot time or in lilo.conf. I have the
-* following in my lilo.conf:
-*
-* append="cdu31a=0x1f88,0,PAS"
-*
-* The first number is the I/O base address of the
-* card. The second is the interrupt (0 means none).
- * The third should be "PAS" if on a Pro-Audio
- * spectrum, or nothing if on something else.
- *
- * This interface is (unfortunately) a polled interface. This is
- * because most Sony interfaces are set up with DMA and interrupts
- * disables. Some (like mine) do not even have the capability to
- * handle interrupts or DMA. For this reason you will see a lot of
- * the following:
- *
- * retry_count = jiffies+ SONY_JIFFIES_TIMEOUT;
- * while (time_before(jiffies, retry_count) && (! <some condition to wait for))
- * {
- * while (handle_sony_cd_attention())
- * ;
- *
- * sony_sleep();
- * }
- * if (the condition not met)
- * {
- * return an error;
- * }
- *
- * This ugly hack waits for something to happen, sleeping a little
- * between every try. it also handles attentions, which are
- * asynchronous events from the drive informing the driver that a disk
- * has been inserted, removed, etc.
- *
- * NEWS FLASH - The driver now supports interrupts but they are
- * turned off by default. Use of interrupts is highly encouraged, it
- * cuts CPU usage down to a reasonable level. I had DMA in for a while
- * but PC DMA is just too slow. Better to just insb() it.
- *
- * One thing about these drives: They talk in MSF (Minute Second Frame) format.
- * There are 75 frames a second, 60 seconds a minute, and up to 75 minutes on a
- * disk. The funny thing is that these are sent to the drive in BCD, but the
- * interface wants to see them in decimal. A lot of conversion goes on.
- *
- * DRIVER SPECIAL FEATURES
- * -----------------------
- *
- * This section describes features beyond the normal audio and CD-ROM
- * functions of the drive.
- *
- * XA compatibility
- *
- * The driver should support XA disks for both the CDU31A and CDU33A.
- * It does this transparently, the using program doesn't need to set it.
- *
- * Multi-Session
- *
- * A multi-session disk looks just like a normal disk to the user.
- * Just mount one normally, and all the data should be there.
- * A special thanks to Koen for help with this!
- *
- * Raw sector I/O
- *
- * Using the CDROMREADAUDIO it is possible to read raw audio and data
- * tracks. Both operations return 2352 bytes per sector. On the data
- * tracks, the first 12 bytes is not returned by the drive and the value
- * of that data is indeterminate.
- *
- *
- * Copyright (C) 1993 Corey Minyard
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * TODO:
- * CDs with form1 and form2 sectors cause problems
- * with current read-ahead strategy.
- *
- * Credits:
- * Heiko Eissfeldt <heiko@colossus.escape.de>
- * For finding abug in the return of the track numbers.
- * TOC processing redone for proper multisession support.
- *
- *
- * It probably a little late to be adding a history, but I guess I
- * will start.
- *
- * 10/24/95 - Added support for disabling the eject button when the
- * drive is open. Note that there is a small problem
- * still here, if the eject button is pushed while the
- * drive light is flashing, the drive will return a bad
- * status and be reset. It recovers, though.
- *
- * 03/07/97 - Fixed a problem with timers.
- *
- *
- * 18 Spetember 1997 -- Ported to Uniform CD-ROM driver by
- * Heiko Eissfeldt <heiko@colossus.escape.de> with additional
- * changes by Erik Andersen <andersee@debian.org>
- *
- * 24 January 1998 -- Removed the scd_disc_status() function, which was now
- * just dead code left over from the port.
- * Erik Andersen <andersee@debian.org>
- *
- * 16 July 1998 -- Drive donated to Erik Andersen by John Kodis
- * <kodis@jagunet.com>. Work begun on fixing driver to
- * work under 2.1.X. Added temporary extra printks
- * which seem to slow it down enough to work.
- *
- * 9 November 1999 -- Make kernel-parameter implementation work with 2.3.x
- * Removed init_module & cleanup_module in favor of
- * module_init & module_exit.
- * Torben Mathiasen <tmm@image.dk>
- *
- * 22 October 2004 -- Make the driver work in 2.6.X
- * Added workaround to fix hard lockups on eject
- * Fixed door locking problem after mounting empty drive
- * Set double-speed drives to double speed by default
- * Removed all readahead things - not needed anymore
- * Ondrej Zary <rainbow@rainbow-software.org>
-*/
-
-#define DEBUG 1
-
-#include <linux/major.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/hdreg.h>
-#include <linux/genhd.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/cdrom.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/dma.h>
-
-#include "cdu31a.h"
-
-#define MAJOR_NR CDU31A_CDROM_MAJOR
-#include <linux/blkdev.h>
-
-#define CDU31A_MAX_CONSECUTIVE_ATTENTIONS 10
-
-#define PFX "CDU31A: "
-
-/*
-** Edit the following data to change interrupts, DMA channels, etc.
-** Default is polled and no DMA. DMA is not recommended for double-speed
-** drives.
-*/
-static struct {
- unsigned short base; /* I/O Base Address */
- short int_num; /* Interrupt Number (-1 means scan for it,
- 0 means don't use) */
-} cdu31a_addresses[] __initdata = {
- {0}
-};
-
-static int handle_sony_cd_attention(void);
-static int read_subcode(void);
-static void sony_get_toc(void);
-static int scd_spinup(void);
-/*static int scd_open(struct inode *inode, struct file *filp);*/
-static int scd_open(struct cdrom_device_info *, int);
-static void do_sony_cd_cmd(unsigned char cmd,
- unsigned char *params,
- unsigned int num_params,
- unsigned char *result_buffer,
- unsigned int *result_size);
-static void size_to_buf(unsigned int size, unsigned char *buf);
-
-/* Parameters for the read-ahead. */
-static unsigned int sony_next_block; /* Next 512 byte block offset */
-static unsigned int sony_blocks_left = 0; /* Number of 512 byte blocks left
- in the current read command. */
-
-
-/* The base I/O address of the Sony Interface. This is a variable (not a
- #define) so it can be easily changed via some future ioctl() */
-static unsigned int cdu31a_port = 0;
-module_param(cdu31a_port, uint, 0);
-
-/*
- * The following are I/O addresses of the various registers for the drive. The
- * comment for the base address also applies here.
- */
-static volatile unsigned short sony_cd_cmd_reg;
-static volatile unsigned short sony_cd_param_reg;
-static volatile unsigned short sony_cd_write_reg;
-static volatile unsigned short sony_cd_control_reg;
-static volatile unsigned short sony_cd_status_reg;
-static volatile unsigned short sony_cd_result_reg;
-static volatile unsigned short sony_cd_read_reg;
-static volatile unsigned short sony_cd_fifost_reg;
-
-static struct request_queue *cdu31a_queue;
-static DEFINE_SPINLOCK(cdu31a_lock); /* queue lock */
-
-static int sony_spun_up = 0; /* Has the drive been spun up? */
-
-static int sony_speed = 0; /* Last wanted speed */
-
-static int sony_xa_mode = 0; /* Is an XA disk in the drive
- and the drive a CDU31A? */
-
-static int sony_raw_data_mode = 1; /* 1 if data tracks, 0 if audio.
- For raw data reads. */
-
-static unsigned int sony_usage = 0; /* How many processes have the
- drive open. */
-
-static int sony_pas_init = 0; /* Initialize the Pro-Audio
- Spectrum card? */
-
-static struct s_sony_session_toc single_toc; /* Holds the
- table of
- contents. */
-
-static struct s_all_sessions_toc sony_toc; /* entries gathered from all
- sessions */
-
-static int sony_toc_read = 0; /* Has the TOC been read for
- the drive? */
-
-static struct s_sony_subcode last_sony_subcode; /* Points to the last
- subcode address read */
-
-static DECLARE_MUTEX(sony_sem); /* Semaphore for drive hardware access */
-
-static int is_double_speed = 0; /* does the drive support double speed ? */
-
-static int is_auto_eject = 1; /* Door has been locked? 1=No/0=Yes */
-
-/*
- * The audio status uses the values from read subchannel data as specified
- * in include/linux/cdrom.h.
- */
-static volatile int sony_audio_status = CDROM_AUDIO_NO_STATUS;
-
-/*
- * The following are a hack for pausing and resuming audio play. The drive
- * does not work as I would expect it, if you stop it then start it again,
- * the drive seeks back to the beginning and starts over. This holds the
- * position during a pause so a resume can restart it. It uses the
- * audio status variable above to tell if it is paused.
- */
-static unsigned volatile char cur_pos_msf[3] = { 0, 0, 0 };
-static unsigned volatile char final_pos_msf[3] = { 0, 0, 0 };
-
-/* What IRQ is the drive using? 0 if none. */
-static int cdu31a_irq = 0;
-module_param(cdu31a_irq, int, 0);
-
-/* The interrupt handler will wake this queue up when it gets an
- interrupts. */
-static DECLARE_WAIT_QUEUE_HEAD(cdu31a_irq_wait);
-static int irq_flag = 0;
-
-static int curr_control_reg = 0; /* Current value of the control register */
-
-/* A disk changed variable. When a disk change is detected, it will
- all be set to TRUE. As the upper layers ask for disk_changed status
- it will be cleared. */
-static char disk_changed;
-
-/* This was readahead_buffer once... Now it's used only for audio reads */
-static char audio_buffer[CD_FRAMESIZE_RAW];
-
-/* Used to time a short period to abort an operation after the
- drive has been idle for a while. This keeps the light on
- the drive from flashing for very long. */
-static struct timer_list cdu31a_abort_timer;
-
-/* Marks if the timeout has started an abort read. This is used
- on entry to the drive to tell the code to read out the status
- from the abort read. */
-static int abort_read_started = 0;
-
-/*
- * Uniform cdrom interface function
- * report back, if disc has changed from time of last request.
- */
-static int scd_media_changed(struct cdrom_device_info *cdi, int disc_nr)
-{
- int retval;
-
- retval = disk_changed;
- disk_changed = 0;
-
- return retval;
-}
-
-/*
- * Uniform cdrom interface function
- * report back, if drive is ready
- */
-static int scd_drive_status(struct cdrom_device_info *cdi, int slot_nr)
-{
- if (CDSL_CURRENT != slot_nr)
- /* we have no changer support */
- return -EINVAL;
- if (sony_spun_up)
- return CDS_DISC_OK;
- if (down_interruptible(&sony_sem))
- return -ERESTARTSYS;
- if (scd_spinup() == 0)
- sony_spun_up = 1;
- up(&sony_sem);
- return sony_spun_up ? CDS_DISC_OK : CDS_DRIVE_NOT_READY;
-}
-
-static inline void enable_interrupts(void)
-{
- curr_control_reg |= (SONY_ATTN_INT_EN_BIT
- | SONY_RES_RDY_INT_EN_BIT
- | SONY_DATA_RDY_INT_EN_BIT);
- outb(curr_control_reg, sony_cd_control_reg);
-}
-
-static inline void disable_interrupts(void)
-{
- curr_control_reg &= ~(SONY_ATTN_INT_EN_BIT
- | SONY_RES_RDY_INT_EN_BIT
- | SONY_DATA_RDY_INT_EN_BIT);
- outb(curr_control_reg, sony_cd_control_reg);
-}
-
-/*
- * Wait a little while (used for polling the drive). If in initialization,
- * setting a timeout doesn't work, so just loop for a while.
- */
-static inline void sony_sleep(void)
-{
- if (cdu31a_irq <= 0) {
- yield();
- } else { /* Interrupt driven */
- DEFINE_WAIT(w);
- int first = 1;
-
- while (1) {
- prepare_to_wait(&cdu31a_irq_wait, &w,
- TASK_INTERRUPTIBLE);
- if (first) {
- enable_interrupts();
- first = 0;
- }
-
- if (irq_flag != 0)
- break;
- if (!signal_pending(current)) {
- schedule();
- continue;
- } else
- disable_interrupts();
- break;
- }
- finish_wait(&cdu31a_irq_wait, &w);
- irq_flag = 0;
- }
-}
-
-
-/*
- * The following are convenience routine to read various status and set
- * various conditions in the drive.
- */
-static inline int is_attention(void)
-{
- return (inb(sony_cd_status_reg) & SONY_ATTN_BIT) != 0;
-}
-
-static inline int is_busy(void)
-{
- return (inb(sony_cd_status_reg) & SONY_BUSY_BIT) != 0;
-}
-
-static inline int is_data_ready(void)
-{
- return (inb(sony_cd_status_reg) & SONY_DATA_RDY_BIT) != 0;
-}
-
-static inline int is_data_requested(void)
-{
- return (inb(sony_cd_status_reg) & SONY_DATA_REQUEST_BIT) != 0;
-}
-
-static inline int is_result_ready(void)
-{
- return (inb(sony_cd_status_reg) & SONY_RES_RDY_BIT) != 0;
-}
-
-static inline int is_param_write_rdy(void)
-{
- return (inb(sony_cd_fifost_reg) & SONY_PARAM_WRITE_RDY_BIT) != 0;
-}
-
-static inline int is_result_reg_not_empty(void)
-{
- return (inb(sony_cd_fifost_reg) & SONY_RES_REG_NOT_EMP_BIT) != 0;
-}
-
-static inline void reset_drive(void)
-{
- curr_control_reg = 0;
- sony_toc_read = 0;
- outb(SONY_DRIVE_RESET_BIT, sony_cd_control_reg);
-}
-
-/*
- * Uniform cdrom interface function
- * reset drive and return when it is ready
- */
-static int scd_reset(struct cdrom_device_info *cdi)
-{
- unsigned long retry_count;
-
- if (down_interruptible(&sony_sem))
- return -ERESTARTSYS;
- reset_drive();
-
- retry_count = jiffies + SONY_RESET_TIMEOUT;
- while (time_before(jiffies, retry_count) && (!is_attention())) {
- sony_sleep();
- }
-
- up(&sony_sem);
- return 0;
-}
-
-static inline void clear_attention(void)
-{
- outb(curr_control_reg | SONY_ATTN_CLR_BIT, sony_cd_control_reg);
-}
-
-static inline void clear_result_ready(void)
-{
- outb(curr_control_reg | SONY_RES_RDY_CLR_BIT, sony_cd_control_reg);
-}
-
-static inline void clear_data_ready(void)
-{
- outb(curr_control_reg | SONY_DATA_RDY_CLR_BIT,
- sony_cd_control_reg);
-}
-
-static inline void clear_param_reg(void)
-{
- outb(curr_control_reg | SONY_PARAM_CLR_BIT, sony_cd_control_reg);
-}
-
-static inline unsigned char read_status_register(void)
-{
- return inb(sony_cd_status_reg);
-}
-
-static inline unsigned char read_result_register(void)
-{
- return inb(sony_cd_result_reg);
-}
-
-static inline unsigned char read_data_register(void)
-{
- return inb(sony_cd_read_reg);
-}
-
-static inline void write_param(unsigned char param)
-{
- outb(param, sony_cd_param_reg);
-}
-
-static inline void write_cmd(unsigned char cmd)
-{
- outb(curr_control_reg | SONY_RES_RDY_INT_EN_BIT,
- sony_cd_control_reg);
- outb(cmd, sony_cd_cmd_reg);
-}
-
-static irqreturn_t cdu31a_interrupt(int irq, void *dev_id)
-{
- unsigned char val;
-
- if (abort_read_started) {
- /* We might be waiting for an abort to finish. Don't
- disable interrupts yet, though, because we handle
- this one here. */
- /* Clear out the result registers. */
- while (is_result_reg_not_empty()) {
- val = read_result_register();
- }
- clear_data_ready();
- clear_result_ready();
-
- /* Clear out the data */
- while (is_data_requested()) {
- val = read_data_register();
- }
- abort_read_started = 0;
-
- /* If something was waiting, wake it up now. */
- if (waitqueue_active(&cdu31a_irq_wait)) {
- disable_interrupts();
- irq_flag = 1;
- wake_up_interruptible(&cdu31a_irq_wait);
- }
- } else if (waitqueue_active(&cdu31a_irq_wait)) {
- disable_interrupts();
- irq_flag = 1;
- wake_up_interruptible(&cdu31a_irq_wait);
- } else {
- disable_interrupts();
- printk(KERN_NOTICE PFX
- "Got an interrupt but nothing was waiting\n");
- }
- return IRQ_HANDLED;
-}
-
-/*
- * give more verbose error messages
- */
-static unsigned char *translate_error(unsigned char err_code)
-{
- static unsigned char errbuf[80];
-
- switch (err_code) {
- case 0x10: return "illegal command ";
- case 0x11: return "illegal parameter ";
-
- case 0x20: return "not loaded ";
- case 0x21: return "no disc ";
- case 0x22: return "not spinning ";
- case 0x23: return "spinning ";
- case 0x25: return "spindle servo ";
- case 0x26: return "focus servo ";
- case 0x29: return "eject mechanism ";
- case 0x2a: return "audio playing ";
- case 0x2c: return "emergency eject ";
-
- case 0x30: return "focus ";
- case 0x31: return "frame sync ";
- case 0x32: return "subcode address ";
- case 0x33: return "block sync ";
- case 0x34: return "header address ";
-
- case 0x40: return "illegal track read ";
- case 0x41: return "mode 0 read ";
- case 0x42: return "illegal mode read ";
- case 0x43: return "illegal block size read ";
- case 0x44: return "mode read ";
- case 0x45: return "form read ";
- case 0x46: return "leadout read ";
- case 0x47: return "buffer overrun ";
-
- case 0x53: return "unrecoverable CIRC ";
- case 0x57: return "unrecoverable LECC ";
-
- case 0x60: return "no TOC ";
- case 0x61: return "invalid subcode data ";
- case 0x63: return "focus on TOC read ";
- case 0x64: return "frame sync on TOC read ";
- case 0x65: return "TOC data ";
-
- case 0x70: return "hardware failure ";
- case 0x91: return "leadin ";
- case 0x92: return "leadout ";
- case 0x93: return "data track ";
- }
- sprintf(errbuf, "unknown 0x%02x ", err_code);
- return errbuf;
-}
-
-/*
- * Set the drive parameters so the drive will auto-spin-up when a
- * disk is inserted.
- */
-static void set_drive_params(int want_doublespeed)
-{
- unsigned char res_reg[12];
- unsigned int res_size;
- unsigned char params[3];
-
-
- params[0] = SONY_SD_AUTO_SPIN_DOWN_TIME;
- params[1] = 0x00; /* Never spin down the drive. */
- do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
- params, 2, res_reg, &res_size);
- if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
- printk(KERN_NOTICE PFX
- "Unable to set spin-down time: 0x%2.2x\n", res_reg[1]);
- }
-
- params[0] = SONY_SD_MECH_CONTROL;
- params[1] = SONY_AUTO_SPIN_UP_BIT; /* Set auto spin up */
-
- if (is_auto_eject)
- params[1] |= SONY_AUTO_EJECT_BIT;
-
- if (is_double_speed && want_doublespeed) {
- params[1] |= SONY_DOUBLE_SPEED_BIT; /* Set the drive to double speed if
- possible */
- }
- do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
- params, 2, res_reg, &res_size);
- if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
- printk(KERN_NOTICE PFX "Unable to set mechanical "
- "parameters: 0x%2.2x\n", res_reg[1]);
- }
-}
-
-/*
- * Uniform cdrom interface function
- * select reading speed for data access
- */
-static int scd_select_speed(struct cdrom_device_info *cdi, int speed)
-{
- if (speed == 0)
- sony_speed = 1;
- else
- sony_speed = speed - 1;
-
- if (down_interruptible(&sony_sem))
- return -ERESTARTSYS;
- set_drive_params(sony_speed);
- up(&sony_sem);
- return 0;
-}
-
-/*
- * Uniform cdrom interface function
- * lock or unlock eject button
- */
-static int scd_lock_door(struct cdrom_device_info *cdi, int lock)
-{
- if (lock == 0) {
- is_auto_eject = 1;
- } else {
- is_auto_eject = 0;
- }
- if (down_interruptible(&sony_sem))
- return -ERESTARTSYS;
- set_drive_params(sony_speed);
- up(&sony_sem);
- return 0;
-}
-
-/*
- * This code will reset the drive and attempt to restore sane parameters.
- */
-static void restart_on_error(void)
-{
- unsigned char res_reg[12];
- unsigned int res_size;
- unsigned long retry_count;
-
-
- printk(KERN_NOTICE PFX "Resetting drive on error\n");
- reset_drive();
- retry_count = jiffies + SONY_RESET_TIMEOUT;
- while (time_before(jiffies, retry_count) && (!is_attention())) {
- sony_sleep();
- }
- set_drive_params(sony_speed);
- do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, &res_size);
- if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
- printk(KERN_NOTICE PFX "Unable to spin up drive: 0x%2.2x\n",
- res_reg[1]);
- }
-
- msleep(2000);
-
- sony_get_toc();
-}
-
-/*
- * This routine writes data to the parameter register. Since this should
- * happen fairly fast, it is polled with no OS waits between.
- */
-static int write_params(unsigned char *params, int num_params)
-{
- unsigned int retry_count;
-
-
- retry_count = SONY_READY_RETRIES;
- while ((retry_count > 0) && (!is_param_write_rdy())) {
- retry_count--;
- }
- if (!is_param_write_rdy()) {
- return -EIO;
- }
-
- while (num_params > 0) {
- write_param(*params);
- params++;
- num_params--;
- }
-
- return 0;
-}
-
-
-/*
- * The following reads data from the command result register. It is a
- * fairly complex routine, all status info flows back through this
- * interface. The algorithm is stolen directly from the flowcharts in
- * the drive manual.
- */
-static void
-get_result(unsigned char *result_buffer, unsigned int *result_size)
-{
- unsigned char a, b;
- int i;
- unsigned long retry_count;
-
-
- while (handle_sony_cd_attention());
- /* Wait for the result data to be ready */
- retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
- while (time_before(jiffies, retry_count)
- && (is_busy() || (!(is_result_ready())))) {
- sony_sleep();
-
- while (handle_sony_cd_attention());
- }
- if (is_busy() || (!(is_result_ready()))) {
- pr_debug(PFX "timeout out %d\n", __LINE__);
- result_buffer[0] = 0x20;
- result_buffer[1] = SONY_TIMEOUT_OP_ERR;
- *result_size = 2;
- return;
- }
-
- /*
- * Get the first two bytes. This determines what else needs
- * to be done.
- */
- clear_result_ready();
- a = read_result_register();
- *result_buffer = a;
- result_buffer++;
-
- /* Check for block error status result. */
- if ((a & 0xf0) == 0x50) {
- *result_size = 1;
- return;
- }
-
- b = read_result_register();
- *result_buffer = b;
- result_buffer++;
- *result_size = 2;
-
- /*
- * 0x20 means an error occurred. Byte 2 will have the error code.
- * Otherwise, the command succeeded, byte 2 will have the count of
- * how many more status bytes are coming.
- *
- * The result register can be read 10 bytes at a time, a wait for
- * result ready to be asserted must be done between every 10 bytes.
- */
- if ((a & 0xf0) != 0x20) {
- if (b > 8) {
- for (i = 0; i < 8; i++) {
- *result_buffer = read_result_register();
- result_buffer++;
- (*result_size)++;
- }
- b = b - 8;
-
- while (b > 10) {
- retry_count = SONY_READY_RETRIES;
- while ((retry_count > 0)
- && (!is_result_ready())) {
- retry_count--;
- }
- if (!is_result_ready()) {
- pr_debug(PFX "timeout out %d\n",
- __LINE__);
- result_buffer[0] = 0x20;
- result_buffer[1] =
- SONY_TIMEOUT_OP_ERR;
- *result_size = 2;
- return;
- }
-
- clear_result_ready();
-
- for (i = 0; i < 10; i++) {
- *result_buffer =
- read_result_register();
- result_buffer++;
- (*result_size)++;
- }
- b = b - 10;
- }
-
- if (b > 0) {
- retry_count = SONY_READY_RETRIES;
- while ((retry_count > 0)
- && (!is_result_ready())) {
- retry_count--;
- }
- if (!is_result_ready()) {
- pr_debug(PFX "timeout out %d\n",
- __LINE__);
- result_buffer[0] = 0x20;
- result_buffer[1] =
- SONY_TIMEOUT_OP_ERR;
- *result_size = 2;
- return;
- }
- }
- }
-
- while (b > 0) {
- *result_buffer = read_result_register();
- result_buffer++;
- (*result_size)++;
- b--;
- }
- }
-}
-
-/*
- * Do a command that does not involve data transfer. This routine must
- * be re-entrant from the same task to support being called from the
- * data operation code when an error occurs.
- */
-static void
-do_sony_cd_cmd(unsigned char cmd,
- unsigned char *params,
- unsigned int num_params,
- unsigned char *result_buffer, unsigned int *result_size)
-{
- unsigned long retry_count;
- int num_retries = 0;
-
-retry_cd_operation:
-
- while (handle_sony_cd_attention());
-
- retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
- while (time_before(jiffies, retry_count) && (is_busy())) {
- sony_sleep();
-
- while (handle_sony_cd_attention());
- }
- if (is_busy()) {
- pr_debug(PFX "timeout out %d\n", __LINE__);
- result_buffer[0] = 0x20;
- result_buffer[1] = SONY_TIMEOUT_OP_ERR;
- *result_size = 2;
- } else {
- clear_result_ready();
- clear_param_reg();
-
- write_params(params, num_params);
- write_cmd(cmd);
-
- get_result(result_buffer, result_size);
- }
-
- if (((result_buffer[0] & 0xf0) == 0x20)
- && (num_retries < MAX_CDU31A_RETRIES)) {
- num_retries++;
- msleep(100);
- goto retry_cd_operation;
- }
-}
-
-
-/*
- * Handle an attention from the drive. This will return 1 if it found one
- * or 0 if not (if one is found, the caller might want to call again).
- *
- * This routine counts the number of consecutive times it is called
- * (since this is always called from a while loop until it returns
- * a 0), and returns a 0 if it happens too many times. This will help
- * prevent a lockup.
- */
-static int handle_sony_cd_attention(void)
-{
- unsigned char atten_code;
- static int num_consecutive_attentions = 0;
- volatile int val;
-
-
-#if 0
- pr_debug(PFX "Entering %s\n", __FUNCTION__);
-#endif
- if (is_attention()) {
- if (num_consecutive_attentions >
- CDU31A_MAX_CONSECUTIVE_ATTENTIONS) {
- printk(KERN_NOTICE PFX "Too many consecutive "
- "attentions: %d\n", num_consecutive_attentions);
- num_consecutive_attentions = 0;
- pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__,
- __LINE__);
- return 0;
- }
-
- clear_attention();
- atten_code = read_result_register();
-
- switch (atten_code) {
- /* Someone changed the CD. Mark it as changed */
- case SONY_MECH_LOADED_ATTN:
- disk_changed = 1;
- sony_toc_read = 0;
- sony_audio_status = CDROM_AUDIO_NO_STATUS;
- sony_blocks_left = 0;
- break;
-
- case SONY_SPIN_DOWN_COMPLETE_ATTN:
- /* Mark the disk as spun down. */
- sony_spun_up = 0;
- break;
-
- case SONY_AUDIO_PLAY_DONE_ATTN:
- sony_audio_status = CDROM_AUDIO_COMPLETED;
- read_subcode();
- break;
-
- case SONY_EJECT_PUSHED_ATTN:
- if (is_auto_eject) {
- sony_audio_status = CDROM_AUDIO_INVALID;
- }
- break;
-
- case SONY_LEAD_IN_ERR_ATTN:
- case SONY_LEAD_OUT_ERR_ATTN:
- case SONY_DATA_TRACK_ERR_ATTN:
- case SONY_AUDIO_PLAYBACK_ERR_ATTN:
- sony_audio_status = CDROM_AUDIO_ERROR;
- break;
- }
-
- num_consecutive_attentions++;
- pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
- return 1;
- } else if (abort_read_started) {
- while (is_result_reg_not_empty()) {
- val = read_result_register();
- }
- clear_data_ready();
- clear_result_ready();
- /* Clear out the data */
- while (is_data_requested()) {
- val = read_data_register();
- }
- abort_read_started = 0;
- pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
- return 1;
- }
-
- num_consecutive_attentions = 0;
-#if 0
- pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-#endif
- return 0;
-}
-
-
-/* Convert from an integer 0-99 to BCD */
-static inline unsigned int int_to_bcd(unsigned int val)
-{
- int retval;
-
-
- retval = (val / 10) << 4;
- retval = retval | val % 10;
- return retval;
-}
-
-
-/* Convert from BCD to an integer from 0-99 */
-static unsigned int bcd_to_int(unsigned int bcd)
-{
- return (((bcd >> 4) & 0x0f) * 10) + (bcd & 0x0f);
-}
-
-
-/*
- * Convert a logical sector value (like the OS would want to use for
- * a block device) to an MSF format.
- */
-static void log_to_msf(unsigned int log, unsigned char *msf)
-{
- log = log + LOG_START_OFFSET;
- msf[0] = int_to_bcd(log / 4500);
- log = log % 4500;
- msf[1] = int_to_bcd(log / 75);
- msf[2] = int_to_bcd(log % 75);
-}
-
-
-/*
- * Convert an MSF format to a logical sector.
- */
-static unsigned int msf_to_log(unsigned char *msf)
-{
- unsigned int log;
-
-
- log = msf[2];
- log += msf[1] * 75;
- log += msf[0] * 4500;
- log = log - LOG_START_OFFSET;
-
- return log;
-}
-
-
-/*
- * Take in integer size value and put it into a buffer like
- * the drive would want to see a number-of-sector value.
- */
-static void size_to_buf(unsigned int size, unsigned char *buf)
-{
- buf[0] = size / 65536;
- size = size % 65536;
- buf[1] = size / 256;
- buf[2] = size % 256;
-}
-
-/* Starts a read operation. Returns 0 on success and 1 on failure.
- The read operation used here allows multiple sequential sectors
- to be read and status returned for each sector. The driver will
- read the output one at a time as the requests come and abort the
- operation if the requested sector is not the next one from the
- drive. */
-static int
-start_request(unsigned int sector, unsigned int nsect)
-{
- unsigned char params[6];
- unsigned long retry_count;
-
-
- pr_debug(PFX "Entering %s\n", __FUNCTION__);
- log_to_msf(sector, params);
- size_to_buf(nsect, &params[3]);
-
- /*
- * Clear any outstanding attentions and wait for the drive to
- * complete any pending operations.
- */
- while (handle_sony_cd_attention());
-
- retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
- while (time_before(jiffies, retry_count) && (is_busy())) {
- sony_sleep();
-
- while (handle_sony_cd_attention());
- }
-
- if (is_busy()) {
- printk(KERN_NOTICE PFX "Timeout while waiting "
- "to issue command\n");
- pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
- return 1;
- } else {
- /* Issue the command */
- clear_result_ready();
- clear_param_reg();
-
- write_params(params, 6);
- write_cmd(SONY_READ_BLKERR_STAT_CMD);
-
- sony_blocks_left = nsect * 4;
- sony_next_block = sector * 4;
- pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
- return 0;
- }
- pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-}
-
-/* Abort a pending read operation. Clear all the drive status variables. */
-static void abort_read(void)
-{
- unsigned char result_reg[2];
- int result_size;
- volatile int val;
-
-
- do_sony_cd_cmd(SONY_ABORT_CMD, NULL, 0, result_reg, &result_size);
- if ((result_reg[0] & 0xf0) == 0x20) {
- printk(KERN_ERR PFX "Aborting read, %s error\n",
- translate_error(result_reg[1]));
- }
-
- while (is_result_reg_not_empty()) {
- val = read_result_register();
- }
- clear_data_ready();
- clear_result_ready();
- /* Clear out the data */
- while (is_data_requested()) {
- val = read_data_register();
- }
-
- sony_blocks_left = 0;
-}
-
-/* Called when the timer times out. This will abort the
- pending read operation. */
-static void handle_abort_timeout(unsigned long data)
-{
- pr_debug(PFX "Entering %s\n", __FUNCTION__);
- /* If it is in use, ignore it. */
- if (down_trylock(&sony_sem) == 0) {
- /* We can't use abort_read(), because it will sleep
- or schedule in the timer interrupt. Just start
- the operation, finish it on the next access to
- the drive. */
- clear_result_ready();
- clear_param_reg();
- write_cmd(SONY_ABORT_CMD);
-
- sony_blocks_left = 0;
- abort_read_started = 1;
- up(&sony_sem);
- }
- pr_debug(PFX "Leaving %s\n", __FUNCTION__);
-}
-
-/* Actually get one sector of data from the drive. */
-static void
-input_data_sector(char *buffer)
-{
- pr_debug(PFX "Entering %s\n", __FUNCTION__);
-
- /* If an XA disk on a CDU31A, skip the first 12 bytes of data from
- the disk. The real data is after that. We can use audio_buffer. */
- if (sony_xa_mode)
- insb(sony_cd_read_reg, audio_buffer, CD_XA_HEAD);
-
- clear_data_ready();
-
- insb(sony_cd_read_reg, buffer, 2048);
-
- /* If an XA disk, we have to clear out the rest of the unused
- error correction data. We can use audio_buffer for that. */
- if (sony_xa_mode)
- insb(sony_cd_read_reg, audio_buffer, CD_XA_TAIL);
-
- pr_debug(PFX "Leaving %s\n", __FUNCTION__);
-}
-
-/* read data from the drive. Note the nsect must be <= 4. */
-static void
-read_data_block(char *buffer,
- unsigned int block,
- unsigned int nblocks,
- unsigned char res_reg[], int *res_size)
-{
- unsigned long retry_count;
-
- pr_debug(PFX "Entering %s\n", __FUNCTION__);
-
- res_reg[0] = 0;
- res_reg[1] = 0;
- *res_size = 0;
-
- /* Wait for the drive to tell us we have something */
- retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
- while (time_before(jiffies, retry_count) && !(is_data_ready())) {
- while (handle_sony_cd_attention());
-
- sony_sleep();
- }
- if (!(is_data_ready())) {
- if (is_result_ready()) {
- get_result(res_reg, res_size);
- if ((res_reg[0] & 0xf0) != 0x20) {
- printk(KERN_NOTICE PFX "Got result that should"
- " have been error: %d\n", res_reg[0]);
- res_reg[0] = 0x20;
- res_reg[1] = SONY_BAD_DATA_ERR;
- *res_size = 2;
- }
- abort_read();
- } else {
- pr_debug(PFX "timeout out %d\n", __LINE__);
- res_reg[0] = 0x20;
- res_reg[1] = SONY_TIMEOUT_OP_ERR;
- *res_size = 2;
- abort_read();
- }
- } else {
- input_data_sector(buffer);
- sony_blocks_left -= nblocks;
- sony_next_block += nblocks;
-
- /* Wait for the status from the drive. */
- retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
- while (time_before(jiffies, retry_count)
- && !(is_result_ready())) {
- while (handle_sony_cd_attention());
-
- sony_sleep();
- }
-
- if (!is_result_ready()) {
- pr_debug(PFX "timeout out %d\n", __LINE__);
- res_reg[0] = 0x20;
- res_reg[1] = SONY_TIMEOUT_OP_ERR;
- *res_size = 2;
- abort_read();
- } else {
- get_result(res_reg, res_size);
-
- /* If we got a buffer status, handle that. */
- if ((res_reg[0] & 0xf0) == 0x50) {
-
- if ((res_reg[0] ==
- SONY_NO_CIRC_ERR_BLK_STAT)
- || (res_reg[0] ==
- SONY_NO_LECC_ERR_BLK_STAT)
- || (res_reg[0] ==
- SONY_RECOV_LECC_ERR_BLK_STAT)) {
- /* nothing here */
- } else {
- printk(KERN_ERR PFX "Data block "
- "error: 0x%x\n", res_reg[0]);
- res_reg[0] = 0x20;
- res_reg[1] = SONY_BAD_DATA_ERR;
- *res_size = 2;
- }
-
- /* Final transfer is done for read command, get final result. */
- if (sony_blocks_left == 0) {
- get_result(res_reg, res_size);
- }
- } else if ((res_reg[0] & 0xf0) != 0x20) {
- /* The drive gave me bad status, I don't know what to do.
- Reset the driver and return an error. */
- printk(KERN_ERR PFX "Invalid block "
- "status: 0x%x\n", res_reg[0]);
- restart_on_error();
- res_reg[0] = 0x20;
- res_reg[1] = SONY_BAD_DATA_ERR;
- *res_size = 2;
- }
- }
- }
- pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-}
-
-
-/*
- * The OS calls this to perform a read or write operation to the drive.
- * Write obviously fail. Reads to a read ahead of sony_buffer_size
- * bytes to help speed operations. This especially helps since the OS
- * uses 1024 byte blocks and the drive uses 2048 byte blocks. Since most
- * data access on a CD is done sequentially, this saves a lot of operations.
- */
-static void do_cdu31a_request(request_queue_t * q)
-{
- struct request *req;
- int block, nblock, num_retries;
- unsigned char res_reg[12];
- unsigned int res_size;
-
- pr_debug(PFX "Entering %s\n", __FUNCTION__);
-
- spin_unlock_irq(q->queue_lock);
- if (down_interruptible(&sony_sem)) {
- spin_lock_irq(q->queue_lock);
- return;
- }
-
- /* Get drive status before doing anything. */
- while (handle_sony_cd_attention());
-
- /* Make sure we have a valid TOC. */
- sony_get_toc();
-
-
- /* Make sure the timer is cancelled. */
- del_timer(&cdu31a_abort_timer);
-
- while (1) {
- /*
- * The beginning here is stolen from the hard disk driver. I hope
- * it's right.
- */
- req = elv_next_request(q);
- if (!req)
- goto end_do_cdu31a_request;
-
- if (!sony_spun_up)
- scd_spinup();
-
- block = req->sector;
- nblock = req->nr_sectors;
- pr_debug(PFX "request at block %d, length %d blocks\n",
- block, nblock);
- if (!sony_toc_read) {
- printk(KERN_NOTICE PFX "TOC not read\n");
- end_request(req, 0);
- continue;
- }
-
- /* WTF??? */
- if (!blk_fs_request(req)) {
- end_request(req, 0);
- continue;
- }
- if (rq_data_dir(req) == WRITE) {
- end_request(req, 0);
- continue;
- }
-
- /*
- * If the block address is invalid or the request goes beyond the end of
- * the media, return an error.
- */
- if (((block + nblock) / 4) >= sony_toc.lead_out_start_lba) {
- printk(KERN_NOTICE PFX "Request past end of media\n");
- end_request(req, 0);
- continue;
- }
-
- if (nblock > 4)
- nblock = 4;
- num_retries = 0;
-
- try_read_again:
- while (handle_sony_cd_attention());
-
- if (!sony_toc_read) {
- printk(KERN_NOTICE PFX "TOC not read\n");
- end_request(req, 0);
- continue;
- }
-
- /* If no data is left to be read from the drive, start the
- next request. */
- if (sony_blocks_left == 0) {
- if (start_request(block / 4, nblock / 4)) {
- end_request(req, 0);
- continue;
- }
- }
- /* If the requested block is not the next one waiting in
- the driver, abort the current operation and start a
- new one. */
- else if (block != sony_next_block) {
- pr_debug(PFX "Read for block %d, expected %d\n",
- block, sony_next_block);
- abort_read();
- if (!sony_toc_read) {
- printk(KERN_NOTICE PFX "TOC not read\n");
- end_request(req, 0);
- continue;
- }
- if (start_request(block / 4, nblock / 4)) {
- printk(KERN_NOTICE PFX "start request failed\n");
- end_request(req, 0);
- continue;
- }
- }
-
- read_data_block(req->buffer, block, nblock, res_reg, &res_size);
-
- if (res_reg[0] != 0x20) {
- if (!end_that_request_first(req, 1, nblock)) {
- spin_lock_irq(q->queue_lock);
- blkdev_dequeue_request(req);
- end_that_request_last(req, 1);
- spin_unlock_irq(q->queue_lock);
- }
- continue;
- }
-
- if (num_retries > MAX_CDU31A_RETRIES) {
- end_request(req, 0);
- continue;
- }
-
- num_retries++;
- if (res_reg[1] == SONY_NOT_SPIN_ERR) {
- do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
- &res_size);
- } else {
- printk(KERN_NOTICE PFX "%s error for block %d, nblock %d\n",
- translate_error(res_reg[1]), block, nblock);
- }
- goto try_read_again;
- }
- end_do_cdu31a_request:
-#if 0
- /* After finished, cancel any pending operations. */
- abort_read();
-#else
- /* Start a timer to time out after a while to disable
- the read. */
- cdu31a_abort_timer.expires = jiffies + 2 * HZ; /* Wait 2 seconds */
- add_timer(&cdu31a_abort_timer);
-#endif
-
- up(&sony_sem);
- spin_lock_irq(q->queue_lock);
- pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-}
-
-
-/*
- * Read the table of contents from the drive and set up TOC if
- * successful.
- */
-static void sony_get_toc(void)
-{
- unsigned char res_reg[2];
- unsigned int res_size;
- unsigned char parms[1];
- int session;
- int num_spin_ups;
- int totaltracks = 0;
- int mint = 99;
- int maxt = 0;
-
- pr_debug(PFX "Entering %s\n", __FUNCTION__);
-
- num_spin_ups = 0;
- if (!sony_toc_read) {
- respinup_on_gettoc:
- /* Ignore the result, since it might error if spinning already. */
- do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
- &res_size);
-
- do_sony_cd_cmd(SONY_READ_TOC_CMD, NULL, 0, res_reg,
- &res_size);
-
- /* The drive sometimes returns error 0. I don't know why, but ignore
- it. It seems to mean the drive has already done the operation. */
- if ((res_size < 2)
- || ((res_reg[0] != 0) && (res_reg[1] != 0))) {
- /* If the drive is already playing, it's ok. */
- if ((res_reg[1] == SONY_AUDIO_PLAYING_ERR)
- || (res_reg[1] == 0)) {
- goto gettoc_drive_spinning;
- }
-
- /* If the drive says it is not spun up (even though we just did it!)
- then retry the operation at least a few times. */
- if ((res_reg[1] == SONY_NOT_SPIN_ERR)
- && (num_spin_ups < MAX_CDU31A_RETRIES)) {
- num_spin_ups++;
- goto respinup_on_gettoc;
- }
-
- printk("cdu31a: Error reading TOC: %x %s\n",
- res_reg[0], translate_error(res_reg[1]));
- return;
- }
-
- gettoc_drive_spinning:
-
- /* The idea here is we keep asking for sessions until the command
- fails. Then we know what the last valid session on the disk is.
- No need to check session 0, since session 0 is the same as session
- 1; the command returns different information if you give it 0.
- */
-#if DEBUG
- memset(&sony_toc, 0x0e, sizeof(sony_toc));
- memset(&single_toc, 0x0f, sizeof(single_toc));
-#endif
- session = 1;
- while (1) {
-/* This seems to slow things down enough to make it work. This
- * appears to be a problem in do_sony_cd_cmd. This printk seems
- * to address the symptoms... -Erik */
- pr_debug(PFX "Trying session %d\n", session);
- parms[0] = session;
- do_sony_cd_cmd(SONY_READ_TOC_SPEC_CMD,
- parms, 1, res_reg, &res_size);
-
- pr_debug(PFX "%2.2x %2.2x\n", res_reg[0], res_reg[1]);
-
- if ((res_size < 2)
- || ((res_reg[0] & 0xf0) == 0x20)) {
- /* An error reading the TOC, this must be past the last session. */
- if (session == 1)
- printk
- ("Yikes! Couldn't read any sessions!");
- break;
- }
- pr_debug(PFX "Reading session %d\n", session);
-
- parms[0] = session;
- do_sony_cd_cmd(SONY_REQ_TOC_DATA_SPEC_CMD,
- parms,
- 1,
- (unsigned char *) &single_toc,
- &res_size);
- if ((res_size < 2)
- || ((single_toc.exec_status[0] & 0xf0) ==
- 0x20)) {
- printk(KERN_ERR PFX "Error reading "
- "session %d: %x %s\n",
- session, single_toc.exec_status[0],
- translate_error(single_toc.
- exec_status[1]));
- /* An error reading the TOC. Return without sony_toc_read
- set. */
- return;
- }
- pr_debug(PFX "add0 %01x, con0 %01x, poi0 %02x, "
- "1st trk %d, dsktyp %x, dum0 %x\n",
- single_toc.address0, single_toc.control0,
- single_toc.point0,
- bcd_to_int(single_toc.first_track_num),
- single_toc.disk_type, single_toc.dummy0);
- pr_debug(PFX "add1 %01x, con1 %01x, poi1 %02x, "
- "lst trk %d, dummy1 %x, dum2 %x\n",
- single_toc.address1, single_toc.control1,
- single_toc.point1,
- bcd_to_int(single_toc.last_track_num),
- single_toc.dummy1, single_toc.dummy2);
- pr_debug(PFX "add2 %01x, con2 %01x, poi2 %02x "
- "leadout start min %d, sec %d, frame %d\n",
- single_toc.address2, single_toc.control2,
- single_toc.point2,
- bcd_to_int(single_toc.lead_out_start_msf[0]),
- bcd_to_int(single_toc.lead_out_start_msf[1]),
- bcd_to_int(single_toc.lead_out_start_msf[2]));
- if (res_size > 18 && single_toc.pointb0 > 0xaf)
- pr_debug(PFX "addb0 %01x, conb0 %01x, poib0 %02x, nextsession min %d, sec %d, frame %d\n"
- "#mode5_ptrs %02d, max_start_outer_leadout_msf min %d, sec %d, frame %d\n",
- single_toc.addressb0,
- single_toc.controlb0,
- single_toc.pointb0,
- bcd_to_int(single_toc.
- next_poss_prog_area_msf
- [0]),
- bcd_to_int(single_toc.
- next_poss_prog_area_msf
- [1]),
- bcd_to_int(single_toc.
- next_poss_prog_area_msf
- [2]),
- single_toc.num_mode_5_pointers,
- bcd_to_int(single_toc.
- max_start_outer_leadout_msf
- [0]),
- bcd_to_int(single_toc.
- max_start_outer_leadout_msf
- [1]),
- bcd_to_int(single_toc.
- max_start_outer_leadout_msf
- [2]));
- if (res_size > 27 && single_toc.pointb1 > 0xaf)
- pr_debug(PFX "addb1 %01x, conb1 %01x, poib1 %02x, %x %x %x %x #skipint_ptrs %d, #skiptrkassign %d %x\n",
- single_toc.addressb1,
- single_toc.controlb1,
- single_toc.pointb1,
- single_toc.dummyb0_1[0],
- single_toc.dummyb0_1[1],
- single_toc.dummyb0_1[2],
- single_toc.dummyb0_1[3],
- single_toc.num_skip_interval_pointers,
- single_toc.num_skip_track_assignments,
- single_toc.dummyb0_2);
- if (res_size > 36 && single_toc.pointb2 > 0xaf)
- pr_debug(PFX "addb2 %01x, conb2 %01x, poib2 %02x, %02x %02x %02x %02x %02x %02x %02x\n",
- single_toc.addressb2,
- single_toc.controlb2,
- single_toc.pointb2,
- single_toc.tracksb2[0],
- single_toc.tracksb2[1],
- single_toc.tracksb2[2],
- single_toc.tracksb2[3],
- single_toc.tracksb2[4],
- single_toc.tracksb2[5],
- single_toc.tracksb2[6]);
- if (res_size > 45 && single_toc.pointb3 > 0xaf)
- pr_debug(PFX "addb3 %01x, conb3 %01x, poib3 %02x, %02x %02x %02x %02x %02x %02x %02x\n",
- single_toc.addressb3,
- single_toc.controlb3,
- single_toc.pointb3,
- single_toc.tracksb3[0],
- single_toc.tracksb3[1],
- single_toc.tracksb3[2],
- single_toc.tracksb3[3],
- single_toc.tracksb3[4],
- single_toc.tracksb3[5],
- single_toc.tracksb3[6]);
- if (res_size > 54 && single_toc.pointb4 > 0xaf)
- pr_debug(PFX "addb4 %01x, conb4 %01x, poib4 %02x, %02x %02x %02x %02x %02x %02x %02x\n",
- single_toc.addressb4,
- single_toc.controlb4,
- single_toc.pointb4,
- single_toc.tracksb4[0],
- single_toc.tracksb4[1],
- single_toc.tracksb4[2],
- single_toc.tracksb4[3],
- single_toc.tracksb4[4],
- single_toc.tracksb4[5],
- single_toc.tracksb4[6]);
- if (res_size > 63 && single_toc.pointc0 > 0xaf)
- pr_debug(PFX "addc0 %01x, conc0 %01x, poic0 %02x, %02x %02x %02x %02x %02x %02x %02x\n",
- single_toc.addressc0,
- single_toc.controlc0,
- single_toc.pointc0,
- single_toc.dummyc0[0],
- single_toc.dummyc0[1],
- single_toc.dummyc0[2],
- single_toc.dummyc0[3],
- single_toc.dummyc0[4],
- single_toc.dummyc0[5],
- single_toc.dummyc0[6]);
-#undef DEBUG
-#define DEBUG 0
-
- sony_toc.lead_out_start_msf[0] =
- bcd_to_int(single_toc.lead_out_start_msf[0]);
- sony_toc.lead_out_start_msf[1] =
- bcd_to_int(single_toc.lead_out_start_msf[1]);
- sony_toc.lead_out_start_msf[2] =
- bcd_to_int(single_toc.lead_out_start_msf[2]);
- sony_toc.lead_out_start_lba =
- single_toc.lead_out_start_lba =
- msf_to_log(sony_toc.lead_out_start_msf);
-
- /* For points that do not exist, move the data over them
- to the right location. */
- if (single_toc.pointb0 != 0xb0) {
- memmove(((char *) &single_toc) + 27,
- ((char *) &single_toc) + 18,
- res_size - 18);
- res_size += 9;
- } else if (res_size > 18) {
- sony_toc.lead_out_start_msf[0] =
- bcd_to_int(single_toc.
- max_start_outer_leadout_msf
- [0]);
- sony_toc.lead_out_start_msf[1] =
- bcd_to_int(single_toc.
- max_start_outer_leadout_msf
- [1]);
- sony_toc.lead_out_start_msf[2] =
- bcd_to_int(single_toc.
- max_start_outer_leadout_msf
- [2]);
- sony_toc.lead_out_start_lba =
- msf_to_log(sony_toc.
- lead_out_start_msf);
- }
- if (single_toc.pointb1 != 0xb1) {
- memmove(((char *) &single_toc) + 36,
- ((char *) &single_toc) + 27,
- res_size - 27);
- res_size += 9;
- }
- if (single_toc.pointb2 != 0xb2) {
- memmove(((char *) &single_toc) + 45,
- ((char *) &single_toc) + 36,
- res_size - 36);
- res_size += 9;
- }
- if (single_toc.pointb3 != 0xb3) {
- memmove(((char *) &single_toc) + 54,
- ((char *) &single_toc) + 45,
- res_size - 45);
- res_size += 9;
- }
- if (single_toc.pointb4 != 0xb4) {
- memmove(((char *) &single_toc) + 63,
- ((char *) &single_toc) + 54,
- res_size - 54);
- res_size += 9;
- }
- if (single_toc.pointc0 != 0xc0) {
- memmove(((char *) &single_toc) + 72,
- ((char *) &single_toc) + 63,
- res_size - 63);
- res_size += 9;
- }
-#if DEBUG
- printk(PRINT_INFO PFX "start track lba %u, "
- "leadout start lba %u\n",
- single_toc.start_track_lba,
- single_toc.lead_out_start_lba);
- {
- int i;
- for (i = 0;
- i <
- 1 +
- bcd_to_int(single_toc.last_track_num)
- -
- bcd_to_int(single_toc.
- first_track_num); i++) {
- printk(KERN_INFO PFX "trk %02d: add 0x%01x, con 0x%01x, track %02d, start min %02d, sec %02d, frame %02d\n",
- i,
- single_toc.tracks[i].address,
- single_toc.tracks[i].control,
- bcd_to_int(single_toc.
- tracks[i].track),
- bcd_to_int(single_toc.
- tracks[i].
- track_start_msf
- [0]),
- bcd_to_int(single_toc.
- tracks[i].
- track_start_msf
- [1]),
- bcd_to_int(single_toc.
- tracks[i].
- track_start_msf
- [2]));
- if (mint >
- bcd_to_int(single_toc.
- tracks[i].track))
- mint =
- bcd_to_int(single_toc.
- tracks[i].
- track);
- if (maxt <
- bcd_to_int(single_toc.
- tracks[i].track))
- maxt =
- bcd_to_int(single_toc.
- tracks[i].
- track);
- }
- printk(KERN_INFO PFX "min track number %d, "
- "max track number %d\n",
- mint, maxt);
- }
-#endif
-
- /* prepare a special table of contents for a CD-I disc. They don't have one. */
- if (single_toc.disk_type == 0x10 &&
- single_toc.first_track_num == 2 &&
- single_toc.last_track_num == 2 /* CD-I */ ) {
- sony_toc.tracks[totaltracks].address = 1;
- sony_toc.tracks[totaltracks].control = 4; /* force data tracks */
- sony_toc.tracks[totaltracks].track = 1;
- sony_toc.tracks[totaltracks].
- track_start_msf[0] = 0;
- sony_toc.tracks[totaltracks].
- track_start_msf[1] = 2;
- sony_toc.tracks[totaltracks].
- track_start_msf[2] = 0;
- mint = maxt = 1;
- totaltracks++;
- } else
- /* gather track entries from this session */
- {
- int i;
- for (i = 0;
- i <
- 1 +
- bcd_to_int(single_toc.last_track_num)
- -
- bcd_to_int(single_toc.
- first_track_num);
- i++, totaltracks++) {
- sony_toc.tracks[totaltracks].
- address =
- single_toc.tracks[i].address;
- sony_toc.tracks[totaltracks].
- control =
- single_toc.tracks[i].control;
- sony_toc.tracks[totaltracks].
- track =
- bcd_to_int(single_toc.
- tracks[i].track);
- sony_toc.tracks[totaltracks].
- track_start_msf[0] =
- bcd_to_int(single_toc.
- tracks[i].
- track_start_msf[0]);
- sony_toc.tracks[totaltracks].
- track_start_msf[1] =
- bcd_to_int(single_toc.
- tracks[i].
- track_start_msf[1]);
- sony_toc.tracks[totaltracks].
- track_start_msf[2] =
- bcd_to_int(single_toc.
- tracks[i].
- track_start_msf[2]);
- if (i == 0)
- single_toc.
- start_track_lba =
- msf_to_log(sony_toc.
- tracks
- [totaltracks].
- track_start_msf);
- if (mint >
- sony_toc.tracks[totaltracks].
- track)
- mint =
- sony_toc.
- tracks[totaltracks].
- track;
- if (maxt <
- sony_toc.tracks[totaltracks].
- track)
- maxt =
- sony_toc.
- tracks[totaltracks].
- track;
- }
- }
- sony_toc.first_track_num = mint;
- sony_toc.last_track_num = maxt;
- /* Disk type of last session wins. For example:
- CD-Extra has disk type 0 for the first session, so
- a dumb HiFi CD player thinks it is a plain audio CD.
- We are interested in the disk type of the last session,
- which is 0x20 (XA) for CD-Extra, so we can access the
- data track ... */
- sony_toc.disk_type = single_toc.disk_type;
- sony_toc.sessions = session;
-
- /* don't believe everything :-) */
- if (session == 1)
- single_toc.start_track_lba = 0;
- sony_toc.start_track_lba =
- single_toc.start_track_lba;
-
- if (session > 1 && single_toc.pointb0 == 0xb0 &&
- sony_toc.lead_out_start_lba ==
- single_toc.lead_out_start_lba) {
- break;
- }
-
- /* Let's not get carried away... */
- if (session > 40) {
- printk(KERN_NOTICE PFX "too many sessions: "
- "%d\n", session);
- break;
- }
- session++;
- }
- sony_toc.track_entries = totaltracks;
- /* add one entry for the LAST track with track number CDROM_LEADOUT */
- sony_toc.tracks[totaltracks].address = single_toc.address2;
- sony_toc.tracks[totaltracks].control = single_toc.control2;
- sony_toc.tracks[totaltracks].track = CDROM_LEADOUT;
- sony_toc.tracks[totaltracks].track_start_msf[0] =
- sony_toc.lead_out_start_msf[0];
- sony_toc.tracks[totaltracks].track_start_msf[1] =
- sony_toc.lead_out_start_msf[1];
- sony_toc.tracks[totaltracks].track_start_msf[2] =
- sony_toc.lead_out_start_msf[2];
-
- sony_toc_read = 1;
-
- pr_debug(PFX "Disk session %d, start track: %d, "
- "stop track: %d\n",
- session, single_toc.start_track_lba,
- single_toc.lead_out_start_lba);
- }
- pr_debug(PFX "Leaving %s\n", __FUNCTION__);
-}
-
-
-/*
- * Uniform cdrom interface function
- * return multisession offset and sector information
- */
-static int scd_get_last_session(struct cdrom_device_info *cdi,
- struct cdrom_multisession *ms_info)
-{
- if (ms_info == NULL)
- return 1;
-
- if (!sony_toc_read) {
- if (down_interruptible(&sony_sem))
- return -ERESTARTSYS;
- sony_get_toc();
- up(&sony_sem);
- }
-
- ms_info->addr_format = CDROM_LBA;
- ms_info->addr.lba = sony_toc.start_track_lba;
- ms_info->xa_flag = sony_toc.disk_type == SONY_XA_DISK_TYPE ||
- sony_toc.disk_type == 0x10 /* CDI */ ;
-
- return 0;
-}
-
-/*
- * Search for a specific track in the table of contents.
- */
-static int find_track(int track)
-{
- int i;
-
- for (i = 0; i <= sony_toc.track_entries; i++) {
- if (sony_toc.tracks[i].track == track) {
- return i;
- }
- }
-
- return -1;
-}
-
-
-/*
- * Read the subcode and put it in last_sony_subcode for future use.
- */
-static int read_subcode(void)
-{
- unsigned int res_size;
-
-
- do_sony_cd_cmd(SONY_REQ_SUBCODE_ADDRESS_CMD,
- NULL,
- 0, (unsigned char *) &last_sony_subcode, &res_size);
- if ((res_size < 2)
- || ((last_sony_subcode.exec_status[0] & 0xf0) == 0x20)) {
- printk(KERN_ERR PFX "Sony CDROM error %s (read_subcode)\n",
- translate_error(last_sony_subcode.exec_status[1]));
- return -EIO;
- }
-
- last_sony_subcode.track_num =
- bcd_to_int(last_sony_subcode.track_num);
- last_sony_subcode.index_num =
- bcd_to_int(last_sony_subcode.index_num);
- last_sony_subcode.abs_msf[0] =
- bcd_to_int(last_sony_subcode.abs_msf[0]);
- last_sony_subcode.abs_msf[1] =
- bcd_to_int(last_sony_subcode.abs_msf[1]);
- last_sony_subcode.abs_msf[2] =
- bcd_to_int(last_sony_subcode.abs_msf[2]);
-
- last_sony_subcode.rel_msf[0] =
- bcd_to_int(last_sony_subcode.rel_msf[0]);
- last_sony_subcode.rel_msf[1] =
- bcd_to_int(last_sony_subcode.rel_msf[1]);
- last_sony_subcode.rel_msf[2] =
- bcd_to_int(last_sony_subcode.rel_msf[2]);
- return 0;
-}
-
-/*
- * Uniform cdrom interface function
- * return the media catalog number found on some older audio cds
- */
-static int
-scd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
-{
- unsigned char resbuffer[2 + 14];
- unsigned char *mcnp = mcn->medium_catalog_number;
- unsigned char *resp = resbuffer + 3;
- unsigned int res_size;
-
- memset(mcn->medium_catalog_number, 0, 14);
- if (down_interruptible(&sony_sem))
- return -ERESTARTSYS;
- do_sony_cd_cmd(SONY_REQ_UPC_EAN_CMD,
- NULL, 0, resbuffer, &res_size);
- up(&sony_sem);
- if ((res_size < 2) || ((resbuffer[0] & 0xf0) == 0x20));
- else {
- /* packed bcd to single ASCII digits */
- *mcnp++ = (*resp >> 4) + '0';
- *mcnp++ = (*resp++ & 0x0f) + '0';
- *mcnp++ = (*resp >> 4) + '0';
- *mcnp++ = (*resp++ & 0x0f) + '0';
- *mcnp++ = (*resp >> 4) + '0';
- *mcnp++ = (*resp++ & 0x0f) + '0';
- *mcnp++ = (*resp >> 4) + '0';
- *mcnp++ = (*resp++ & 0x0f) + '0';
- *mcnp++ = (*resp >> 4) + '0';
- *mcnp++ = (*resp++ & 0x0f) + '0';
- *mcnp++ = (*resp >> 4) + '0';
- *mcnp++ = (*resp++ & 0x0f) + '0';
- *mcnp++ = (*resp >> 4) + '0';
- }
- *mcnp = '\0';
- return 0;
-}
-
-
-/*
- * Get the subchannel info like the CDROMSUBCHNL command wants to see it. If
- * the drive is playing, the subchannel needs to be read (since it would be
- * changing). If the drive is paused or completed, the subcode information has
- * already been stored, just use that. The ioctl call wants things in decimal
- * (not BCD), so all the conversions are done.
- */
-static int sony_get_subchnl_info(struct cdrom_subchnl *schi)
-{
- /* Get attention stuff */
- while (handle_sony_cd_attention());
-
- sony_get_toc();
- if (!sony_toc_read) {
- return -EIO;
- }
-
- switch (sony_audio_status) {
- case CDROM_AUDIO_NO_STATUS:
- case CDROM_AUDIO_PLAY:
- if (read_subcode() < 0) {
- return -EIO;
- }
- break;
-
- case CDROM_AUDIO_PAUSED:
- case CDROM_AUDIO_COMPLETED:
- break;
-
-#if 0
- case CDROM_AUDIO_NO_STATUS:
- schi->cdsc_audiostatus = sony_audio_status;
- return 0;
- break;
-#endif
- case CDROM_AUDIO_INVALID:
- case CDROM_AUDIO_ERROR:
- default:
- return -EIO;
- }
-
- schi->cdsc_audiostatus = sony_audio_status;
- schi->cdsc_adr = last_sony_subcode.address;
- schi->cdsc_ctrl = last_sony_subcode.control;
- schi->cdsc_trk = last_sony_subcode.track_num;
- schi->cdsc_ind = last_sony_subcode.index_num;
- if (schi->cdsc_format == CDROM_MSF) {
- schi->cdsc_absaddr.msf.minute =
- last_sony_subcode.abs_msf[0];
- schi->cdsc_absaddr.msf.second =
- last_sony_subcode.abs_msf[1];
- schi->cdsc_absaddr.msf.frame =
- last_sony_subcode.abs_msf[2];
-
- schi->cdsc_reladdr.msf.minute =
- last_sony_subcode.rel_msf[0];
- schi->cdsc_reladdr.msf.second =
- last_sony_subcode.rel_msf[1];
- schi->cdsc_reladdr.msf.frame =
- last_sony_subcode.rel_msf[2];
- } else if (schi->cdsc_format == CDROM_LBA) {
- schi->cdsc_absaddr.lba =
- msf_to_log(last_sony_subcode.abs_msf);
- schi->cdsc_reladdr.lba =
- msf_to_log(last_sony_subcode.rel_msf);
- }
-
- return 0;
-}
-
-/* Get audio data from the drive. This is fairly complex because I
- am looking for status and data at the same time, but if I get status
- then I just look for data. I need to get the status immediately so
- the switch from audio to data tracks will happen quickly. */
-static void
-read_audio_data(char *buffer, unsigned char res_reg[], int *res_size)
-{
- unsigned long retry_count;
- int result_read;
-
-
- res_reg[0] = 0;
- res_reg[1] = 0;
- *res_size = 0;
- result_read = 0;
-
- /* Wait for the drive to tell us we have something */
- retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
- continue_read_audio_wait:
- while (time_before(jiffies, retry_count) && !(is_data_ready())
- && !(is_result_ready() || result_read)) {
- while (handle_sony_cd_attention());
-
- sony_sleep();
- }
- if (!(is_data_ready())) {
- if (is_result_ready() && !result_read) {
- get_result(res_reg, res_size);
-
- /* Read block status and continue waiting for data. */
- if ((res_reg[0] & 0xf0) == 0x50) {
- result_read = 1;
- goto continue_read_audio_wait;
- }
- /* Invalid data from the drive. Shut down the operation. */
- else if ((res_reg[0] & 0xf0) != 0x20) {
- printk(KERN_WARNING PFX "Got result that "
- "should have been error: %d\n",
- res_reg[0]);
- res_reg[0] = 0x20;
- res_reg[1] = SONY_BAD_DATA_ERR;
- *res_size = 2;
- }
- abort_read();
- } else {
- pr_debug(PFX "timeout out %d\n", __LINE__);
- res_reg[0] = 0x20;
- res_reg[1] = SONY_TIMEOUT_OP_ERR;
- *res_size = 2;
- abort_read();
- }
- } else {
- clear_data_ready();
-
- /* If data block, then get 2340 bytes offset by 12. */
- if (sony_raw_data_mode) {
- insb(sony_cd_read_reg, buffer + CD_XA_HEAD,
- CD_FRAMESIZE_RAW1);
- } else {
- /* Audio gets the whole 2352 bytes. */
- insb(sony_cd_read_reg, buffer, CD_FRAMESIZE_RAW);
- }
-
- /* If I haven't already gotten the result, get it now. */
- if (!result_read) {
- /* Wait for the drive to tell us we have something */
- retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
- while (time_before(jiffies, retry_count)
- && !(is_result_ready())) {
- while (handle_sony_cd_attention());
-
- sony_sleep();
- }
-
- if (!is_result_ready()) {
- pr_debug(PFX "timeout out %d\n", __LINE__);
- res_reg[0] = 0x20;
- res_reg[1] = SONY_TIMEOUT_OP_ERR;
- *res_size = 2;
- abort_read();
- return;
- } else {
- get_result(res_reg, res_size);
- }
- }
-
- if ((res_reg[0] & 0xf0) == 0x50) {
- if ((res_reg[0] == SONY_NO_CIRC_ERR_BLK_STAT)
- || (res_reg[0] == SONY_NO_LECC_ERR_BLK_STAT)
- || (res_reg[0] == SONY_RECOV_LECC_ERR_BLK_STAT)
- || (res_reg[0] == SONY_NO_ERR_DETECTION_STAT)) {
- /* Ok, nothing to do. */
- } else {
- printk(KERN_ERR PFX "Data block error: 0x%x\n",
- res_reg[0]);
- res_reg[0] = 0x20;
- res_reg[1] = SONY_BAD_DATA_ERR;
- *res_size = 2;
- }
- } else if ((res_reg[0] & 0xf0) != 0x20) {
- /* The drive gave me bad status, I don't know what to do.
- Reset the driver and return an error. */
- printk(KERN_NOTICE PFX "Invalid block status: 0x%x\n",
- res_reg[0]);
- restart_on_error();
- res_reg[0] = 0x20;
- res_reg[1] = SONY_BAD_DATA_ERR;
- *res_size = 2;
- }
- }
-}
-
-/* Perform a raw data read. This will automatically detect the
- track type and read the proper data (audio or data). */
-static int read_audio(struct cdrom_read_audio *ra)
-{
- int retval;
- unsigned char params[2];
- unsigned char res_reg[12];
- unsigned int res_size;
- unsigned int cframe;
-
- if (down_interruptible(&sony_sem))
- return -ERESTARTSYS;
- if (!sony_spun_up)
- scd_spinup();
-
- /* Set the drive to do raw operations. */
- params[0] = SONY_SD_DECODE_PARAM;
- params[1] = 0x06 | sony_raw_data_mode;
- do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
- params, 2, res_reg, &res_size);
- if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
- printk(KERN_ERR PFX "Unable to set decode params: 0x%2.2x\n",
- res_reg[1]);
- retval = -EIO;
- goto out_up;
- }
-
- /* From here down, we have to goto exit_read_audio instead of returning
- because the drive parameters have to be set back to data before
- return. */
-
- retval = 0;
- if (start_request(ra->addr.lba, ra->nframes)) {
- retval = -EIO;
- goto exit_read_audio;
- }
-
- /* For every requested frame. */
- cframe = 0;
- while (cframe < ra->nframes) {
- read_audio_data(audio_buffer, res_reg, &res_size);
- if ((res_reg[0] & 0xf0) == 0x20) {
- if (res_reg[1] == SONY_BAD_DATA_ERR) {
- printk(KERN_ERR PFX "Data error on audio "
- "sector %d\n",
- ra->addr.lba + cframe);
- } else if (res_reg[1] == SONY_ILL_TRACK_R_ERR) {
- /* Illegal track type, change track types and start over. */
- sony_raw_data_mode =
- (sony_raw_data_mode) ? 0 : 1;
-
- /* Set the drive mode. */
- params[0] = SONY_SD_DECODE_PARAM;
- params[1] = 0x06 | sony_raw_data_mode;
- do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
- params,
- 2, res_reg, &res_size);
- if ((res_size < 2)
- || ((res_reg[0] & 0xf0) == 0x20)) {
- printk(KERN_ERR PFX "Unable to set "
- "decode params: 0x%2.2x\n",
- res_reg[1]);
- retval = -EIO;
- goto exit_read_audio;
- }
-
- /* Restart the request on the current frame. */
- if (start_request
- (ra->addr.lba + cframe,
- ra->nframes - cframe)) {
- retval = -EIO;
- goto exit_read_audio;
- }
-
- /* Don't go back to the top because don't want to get into
- and infinite loop. A lot of code gets duplicated, but
- that's no big deal, I don't guess. */
- read_audio_data(audio_buffer, res_reg,
- &res_size);
- if ((res_reg[0] & 0xf0) == 0x20) {
- if (res_reg[1] ==
- SONY_BAD_DATA_ERR) {
- printk(KERN_ERR PFX "Data error"
- " on audio sector %d\n",
- ra->addr.lba +
- cframe);
- } else {
- printk(KERN_ERR PFX "Error reading audio data on sector %d: %s\n",
- ra->addr.lba + cframe,
- translate_error
- (res_reg[1]));
- retval = -EIO;
- goto exit_read_audio;
- }
- } else if (copy_to_user(ra->buf +
- (CD_FRAMESIZE_RAW
- * cframe),
- audio_buffer,
- CD_FRAMESIZE_RAW)) {
- retval = -EFAULT;
- goto exit_read_audio;
- }
- } else {
- printk(KERN_ERR PFX "Error reading audio "
- "data on sector %d: %s\n",
- ra->addr.lba + cframe,
- translate_error(res_reg[1]));
- retval = -EIO;
- goto exit_read_audio;
- }
- } else if (copy_to_user(ra->buf + (CD_FRAMESIZE_RAW * cframe),
- (char *)audio_buffer,
- CD_FRAMESIZE_RAW)) {
- retval = -EFAULT;
- goto exit_read_audio;
- }
-
- cframe++;
- }
-
- get_result(res_reg, &res_size);
- if ((res_reg[0] & 0xf0) == 0x20) {
- printk(KERN_ERR PFX "Error return from audio read: %s\n",
- translate_error(res_reg[1]));
- retval = -EIO;
- goto exit_read_audio;
- }
-
- exit_read_audio:
-
- /* Set the drive mode back to the proper one for the disk. */
- params[0] = SONY_SD_DECODE_PARAM;
- if (!sony_xa_mode) {
- params[1] = 0x0f;
- } else {
- params[1] = 0x07;
- }
- do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
- params, 2, res_reg, &res_size);
- if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
- printk(KERN_ERR PFX "Unable to reset decode params: 0x%2.2x\n",
- res_reg[1]);
- retval = -EIO;
- }
-
- out_up:
- up(&sony_sem);
-
- return retval;
-}
-
-static int
-do_sony_cd_cmd_chk(const char *name,
- unsigned char cmd,
- unsigned char *params,
- unsigned int num_params,
- unsigned char *result_buffer, unsigned int *result_size)
-{
- do_sony_cd_cmd(cmd, params, num_params, result_buffer,
- result_size);
- if ((*result_size < 2) || ((result_buffer[0] & 0xf0) == 0x20)) {
- printk(KERN_ERR PFX "Error %s (CDROM%s)\n",
- translate_error(result_buffer[1]), name);
- return -EIO;
- }
- return 0;
-}
-
-/*
- * Uniform cdrom interface function
- * open the tray
- */
-static int scd_tray_move(struct cdrom_device_info *cdi, int position)
-{
- int retval;
-
- if (down_interruptible(&sony_sem))
- return -ERESTARTSYS;
- if (position == 1 /* open tray */ ) {
- unsigned char res_reg[12];
- unsigned int res_size;
-
- do_sony_cd_cmd(SONY_AUDIO_STOP_CMD, NULL, 0, res_reg,
- &res_size);
- do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0, res_reg,
- &res_size);
-
- sony_audio_status = CDROM_AUDIO_INVALID;
- retval = do_sony_cd_cmd_chk("EJECT", SONY_EJECT_CMD, NULL, 0,
- res_reg, &res_size);
- } else {
- if (0 == scd_spinup())
- sony_spun_up = 1;
- retval = 0;
- }
- up(&sony_sem);
- return retval;
-}
-
-/*
- * The big ugly ioctl handler.
- */
-static int scd_audio_ioctl(struct cdrom_device_info *cdi,
- unsigned int cmd, void *arg)
-{
- unsigned char res_reg[12];
- unsigned int res_size;
- unsigned char params[7];
- int i, retval;
-
- if (down_interruptible(&sony_sem))
- return -ERESTARTSYS;
- switch (cmd) {
- case CDROMSTART: /* Spin up the drive */
- retval = do_sony_cd_cmd_chk("START", SONY_SPIN_UP_CMD, NULL,
- 0, res_reg, &res_size);
- break;
-
- case CDROMSTOP: /* Spin down the drive */
- do_sony_cd_cmd(SONY_AUDIO_STOP_CMD, NULL, 0, res_reg,
- &res_size);
-
- /*
- * Spin the drive down, ignoring the error if the disk was
- * already not spinning.
- */
- sony_audio_status = CDROM_AUDIO_NO_STATUS;
- retval = do_sony_cd_cmd_chk("STOP", SONY_SPIN_DOWN_CMD, NULL,
- 0, res_reg, &res_size);
- break;
-
- case CDROMPAUSE: /* Pause the drive */
- if (do_sony_cd_cmd_chk
- ("PAUSE", SONY_AUDIO_STOP_CMD, NULL, 0, res_reg,
- &res_size)) {
- retval = -EIO;
- break;
- }
- /* Get the current position and save it for resuming */
- if (read_subcode() < 0) {
- retval = -EIO;
- break;
- }
- cur_pos_msf[0] = last_sony_subcode.abs_msf[0];
- cur_pos_msf[1] = last_sony_subcode.abs_msf[1];
- cur_pos_msf[2] = last_sony_subcode.abs_msf[2];
- sony_audio_status = CDROM_AUDIO_PAUSED;
- retval = 0;
- break;
-
- case CDROMRESUME: /* Start the drive after being paused */
- if (sony_audio_status != CDROM_AUDIO_PAUSED) {
- retval = -EINVAL;
- break;
- }
-
- do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
- &res_size);
-
- /* Start the drive at the saved position. */
- params[1] = int_to_bcd(cur_pos_msf[0]);
- params[2] = int_to_bcd(cur_pos_msf[1]);
- params[3] = int_to_bcd(cur_pos_msf[2]);
- params[4] = int_to_bcd(final_pos_msf[0]);
- params[5] = int_to_bcd(final_pos_msf[1]);
- params[6] = int_to_bcd(final_pos_msf[2]);
- params[0] = 0x03;
- if (do_sony_cd_cmd_chk
- ("RESUME", SONY_AUDIO_PLAYBACK_CMD, params, 7, res_reg,
- &res_size) < 0) {
- retval = -EIO;
- break;
- }
- sony_audio_status = CDROM_AUDIO_PLAY;
- retval = 0;
- break;
-
- case CDROMPLAYMSF: /* Play starting at the given MSF address. */
- do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
- &res_size);
-
- /* The parameters are given in int, must be converted */
- for (i = 1; i < 7; i++) {
- params[i] =
- int_to_bcd(((unsigned char *) arg)[i - 1]);
- }
- params[0] = 0x03;
- if (do_sony_cd_cmd_chk
- ("PLAYMSF", SONY_AUDIO_PLAYBACK_CMD, params, 7,
- res_reg, &res_size) < 0) {
- retval = -EIO;
- break;
- }
-
- /* Save the final position for pauses and resumes */
- final_pos_msf[0] = bcd_to_int(params[4]);
- final_pos_msf[1] = bcd_to_int(params[5]);
- final_pos_msf[2] = bcd_to_int(params[6]);
- sony_audio_status = CDROM_AUDIO_PLAY;
- retval = 0;
- break;
-
- case CDROMREADTOCHDR: /* Read the table of contents header */
- {
- struct cdrom_tochdr *hdr;
-
- sony_get_toc();
- if (!sony_toc_read) {
- retval = -EIO;
- break;
- }
-
- hdr = (struct cdrom_tochdr *) arg;
- hdr->cdth_trk0 = sony_toc.first_track_num;
- hdr->cdth_trk1 = sony_toc.last_track_num;
- }
- retval = 0;
- break;
-
- case CDROMREADTOCENTRY: /* Read a given table of contents entry */
- {
- struct cdrom_tocentry *entry;
- int track_idx;
- unsigned char *msf_val = NULL;
-
- sony_get_toc();
- if (!sony_toc_read) {
- retval = -EIO;
- break;
- }
-
- entry = (struct cdrom_tocentry *) arg;
-
- track_idx = find_track(entry->cdte_track);
- if (track_idx < 0) {
- retval = -EINVAL;
- break;
- }
-
- entry->cdte_adr =
- sony_toc.tracks[track_idx].address;
- entry->cdte_ctrl =
- sony_toc.tracks[track_idx].control;
- msf_val =
- sony_toc.tracks[track_idx].track_start_msf;
-
- /* Logical buffer address or MSF format requested? */
- if (entry->cdte_format == CDROM_LBA) {
- entry->cdte_addr.lba = msf_to_log(msf_val);
- } else if (entry->cdte_format == CDROM_MSF) {
- entry->cdte_addr.msf.minute = *msf_val;
- entry->cdte_addr.msf.second =
- *(msf_val + 1);
- entry->cdte_addr.msf.frame =
- *(msf_val + 2);
- }
- }
- retval = 0;
- break;
-
- case CDROMPLAYTRKIND: /* Play a track. This currently ignores index. */
- {
- struct cdrom_ti *ti = (struct cdrom_ti *) arg;
- int track_idx;
-
- sony_get_toc();
- if (!sony_toc_read) {
- retval = -EIO;
- break;
- }
-
- if ((ti->cdti_trk0 < sony_toc.first_track_num)
- || (ti->cdti_trk0 > sony_toc.last_track_num)
- || (ti->cdti_trk1 < ti->cdti_trk0)) {
- retval = -EINVAL;
- break;
- }
-
- track_idx = find_track(ti->cdti_trk0);
- if (track_idx < 0) {
- retval = -EINVAL;
- break;
- }
- params[1] =
- int_to_bcd(sony_toc.tracks[track_idx].
- track_start_msf[0]);
- params[2] =
- int_to_bcd(sony_toc.tracks[track_idx].
- track_start_msf[1]);
- params[3] =
- int_to_bcd(sony_toc.tracks[track_idx].
- track_start_msf[2]);
-
- /*
- * If we want to stop after the last track, use the lead-out
- * MSF to do that.
- */
- if (ti->cdti_trk1 >= sony_toc.last_track_num) {
- track_idx = find_track(CDROM_LEADOUT);
- } else {
- track_idx = find_track(ti->cdti_trk1 + 1);
- }
- if (track_idx < 0) {
- retval = -EINVAL;
- break;
- }
- params[4] =
- int_to_bcd(sony_toc.tracks[track_idx].
- track_start_msf[0]);
- params[5] =
- int_to_bcd(sony_toc.tracks[track_idx].
- track_start_msf[1]);
- params[6] =
- int_to_bcd(sony_toc.tracks[track_idx].
- track_start_msf[2]);
- params[0] = 0x03;
-
- do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
- &res_size);
-
- do_sony_cd_cmd(SONY_AUDIO_PLAYBACK_CMD, params, 7,
- res_reg, &res_size);
-
- if ((res_size < 2)
- || ((res_reg[0] & 0xf0) == 0x20)) {
- printk(KERN_ERR PFX
- "Params: %x %x %x %x %x %x %x\n",
- params[0], params[1], params[2],
- params[3], params[4], params[5],
- params[6]);
- printk(KERN_ERR PFX
- "Error %s (CDROMPLAYTRKIND)\n",
- translate_error(res_reg[1]));
- retval = -EIO;
- break;
- }
-
- /* Save the final position for pauses and resumes */
- final_pos_msf[0] = bcd_to_int(params[4]);
- final_pos_msf[1] = bcd_to_int(params[5]);
- final_pos_msf[2] = bcd_to_int(params[6]);
- sony_audio_status = CDROM_AUDIO_PLAY;
- retval = 0;
- break;
- }
-
- case CDROMVOLCTRL: /* Volume control. What volume does this change, anyway? */
- {
- struct cdrom_volctrl *volctrl =
- (struct cdrom_volctrl *) arg;
-
- params[0] = SONY_SD_AUDIO_VOLUME;
- params[1] = volctrl->channel0;
- params[2] = volctrl->channel1;
- retval = do_sony_cd_cmd_chk("VOLCTRL",
- SONY_SET_DRIVE_PARAM_CMD,
- params, 3, res_reg,
- &res_size);
- break;
- }
- case CDROMSUBCHNL: /* Get subchannel info */
- retval = sony_get_subchnl_info((struct cdrom_subchnl *) arg);
- break;
-
- default:
- retval = -EINVAL;
- break;
- }
- up(&sony_sem);
- return retval;
-}
-
-static int scd_read_audio(struct cdrom_device_info *cdi,
- unsigned int cmd, unsigned long arg)
-{
- void __user *argp = (void __user *)arg;
- int retval;
-
- if (down_interruptible(&sony_sem))
- return -ERESTARTSYS;
- switch (cmd) {
- case CDROMREADAUDIO: /* Read 2352 byte audio tracks and 2340 byte
- raw data tracks. */
- {
- struct cdrom_read_audio ra;
-
-
- sony_get_toc();
- if (!sony_toc_read) {
- retval = -EIO;
- break;
- }
-
- if (copy_from_user(&ra, argp, sizeof(ra))) {
- retval = -EFAULT;
- break;
- }
-
- if (ra.nframes == 0) {
- retval = 0;
- break;
- }
-
- if (!access_ok(VERIFY_WRITE, ra.buf,
- CD_FRAMESIZE_RAW * ra.nframes))
- return -EFAULT;
-
- if (ra.addr_format == CDROM_LBA) {
- if ((ra.addr.lba >=
- sony_toc.lead_out_start_lba)
- || (ra.addr.lba + ra.nframes >=
- sony_toc.lead_out_start_lba)) {
- retval = -EINVAL;
- break;
- }
- } else if (ra.addr_format == CDROM_MSF) {
- if ((ra.addr.msf.minute >= 75)
- || (ra.addr.msf.second >= 60)
- || (ra.addr.msf.frame >= 75)) {
- retval = -EINVAL;
- break;
- }
-
- ra.addr.lba = ((ra.addr.msf.minute * 4500)
- + (ra.addr.msf.second * 75)
- + ra.addr.msf.frame);
- if ((ra.addr.lba >=
- sony_toc.lead_out_start_lba)
- || (ra.addr.lba + ra.nframes >=
- sony_toc.lead_out_start_lba)) {
- retval = -EINVAL;
- break;
- }
-
- /* I know, this can go negative on an unsigned. However,
- the first thing done to the data is to add this value,
- so this should compensate and allow direct msf access. */
- ra.addr.lba -= LOG_START_OFFSET;
- } else {
- retval = -EINVAL;
- break;
- }
-
- retval = read_audio(&ra);
- break;
- }
- retval = 0;
- break;
-
- default:
- retval = -EINVAL;
- }
- up(&sony_sem);
- return retval;
-}
-
-static int scd_spinup(void)
-{
- unsigned char res_reg[12];
- unsigned int res_size;
- int num_spin_ups;
-
- num_spin_ups = 0;
-
- respinup_on_open:
- do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, &res_size);
-
- /* The drive sometimes returns error 0. I don't know why, but ignore
- it. It seems to mean the drive has already done the operation. */
- if ((res_size < 2) || ((res_reg[0] != 0) && (res_reg[1] != 0))) {
- printk(KERN_ERR PFX "%s error (scd_open, spin up)\n",
- translate_error(res_reg[1]));
- return 1;
- }
-
- do_sony_cd_cmd(SONY_READ_TOC_CMD, NULL, 0, res_reg, &res_size);
-
- /* The drive sometimes returns error 0. I don't know why, but ignore
- it. It seems to mean the drive has already done the operation. */
- if ((res_size < 2) || ((res_reg[0] != 0) && (res_reg[1] != 0))) {
- /* If the drive is already playing, it's ok. */
- if ((res_reg[1] == SONY_AUDIO_PLAYING_ERR)
- || (res_reg[1] == 0)) {
- return 0;
- }
-
- /* If the drive says it is not spun up (even though we just did it!)
- then retry the operation at least a few times. */
- if ((res_reg[1] == SONY_NOT_SPIN_ERR)
- && (num_spin_ups < MAX_CDU31A_RETRIES)) {
- num_spin_ups++;
- goto respinup_on_open;
- }
-
- printk(KERN_ERR PFX "Error %s (scd_open, read toc)\n",
- translate_error(res_reg[1]));
- do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0, res_reg,
- &res_size);
- return 1;
- }
- return 0;
-}
-
-/*
- * Open the drive for operations. Spin the drive up and read the table of
- * contents if these have not already been done.
- */
-static int scd_open(struct cdrom_device_info *cdi, int purpose)
-{
- unsigned char res_reg[12];
- unsigned int res_size;
- unsigned char params[2];
-
- if (purpose == 1) {
- /* Open for IOCTLs only - no media check */
- sony_usage++;
- return 0;
- }
-
- if (sony_usage == 0) {
- if (scd_spinup() != 0)
- return -EIO;
- sony_get_toc();
- if (!sony_toc_read) {
- do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0,
- res_reg, &res_size);
- return -EIO;
- }
-
- /* For XA on the CDU31A only, we have to do special reads.
- The CDU33A handles XA automagically. */
- /* if ( (sony_toc.disk_type == SONY_XA_DISK_TYPE) */
- if ((sony_toc.disk_type != 0x00)
- && (!is_double_speed)) {
- params[0] = SONY_SD_DECODE_PARAM;
- params[1] = 0x07;
- do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
- params, 2, res_reg, &res_size);
- if ((res_size < 2)
- || ((res_reg[0] & 0xf0) == 0x20)) {
- printk(KERN_WARNING PFX "Unable to set "
- "XA params: 0x%2.2x\n", res_reg[1]);
- }
- sony_xa_mode = 1;
- }
- /* A non-XA disk. Set the parms back if necessary. */
- else if (sony_xa_mode) {
- params[0] = SONY_SD_DECODE_PARAM;
- params[1] = 0x0f;
- do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
- params, 2, res_reg, &res_size);
- if ((res_size < 2)
- || ((res_reg[0] & 0xf0) == 0x20)) {
- printk(KERN_WARNING PFX "Unable to reset "
- "XA params: 0x%2.2x\n", res_reg[1]);
- }
- sony_xa_mode = 0;
- }
-
- sony_spun_up = 1;
- }
-
- sony_usage++;
-
- return 0;
-}
-
-
-/*
- * Close the drive. Spin it down if no task is using it. The spin
- * down will fail if playing audio, so audio play is OK.
- */
-static void scd_release(struct cdrom_device_info *cdi)
-{
- if (sony_usage == 1) {
- unsigned char res_reg[12];
- unsigned int res_size;
-
- do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0, res_reg,
- &res_size);
-
- sony_spun_up = 0;
- }
- sony_usage--;
-}
-
-static struct cdrom_device_ops scd_dops = {
- .open = scd_open,
- .release = scd_release,
- .drive_status = scd_drive_status,
- .media_changed = scd_media_changed,
- .tray_move = scd_tray_move,
- .lock_door = scd_lock_door,
- .select_speed = scd_select_speed,
- .get_last_session = scd_get_last_session,
- .get_mcn = scd_get_mcn,
- .reset = scd_reset,
- .audio_ioctl = scd_audio_ioctl,
- .capability = CDC_OPEN_TRAY | CDC_CLOSE_TRAY | CDC_LOCK |
- CDC_SELECT_SPEED | CDC_MULTI_SESSION |
- CDC_MCN | CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO |
- CDC_RESET | CDC_DRIVE_STATUS,
- .n_minors = 1,
-};
-
-static struct cdrom_device_info scd_info = {
- .ops = &scd_dops,
- .speed = 2,
- .capacity = 1,
- .name = "cdu31a"
-};
-
-static int scd_block_open(struct inode *inode, struct file *file)
-{
- return cdrom_open(&scd_info, inode, file);
-}
-
-static int scd_block_release(struct inode *inode, struct file *file)
-{
- return cdrom_release(&scd_info, file);
-}
-
-static int scd_block_ioctl(struct inode *inode, struct file *file,
- unsigned cmd, unsigned long arg)
-{
- int retval;
-
- /* The eject and close commands should be handled by Uniform CD-ROM
- * driver - but I always got hard lockup instead of eject
- * until I put this here.
- */
- switch (cmd) {
- case CDROMEJECT:
- scd_lock_door(&scd_info, 0);
- retval = scd_tray_move(&scd_info, 1);
- break;
- case CDROMCLOSETRAY:
- retval = scd_tray_move(&scd_info, 0);
- break;
- case CDROMREADAUDIO:
- retval = scd_read_audio(&scd_info, CDROMREADAUDIO, arg);
- break;
- default:
- retval = cdrom_ioctl(file, &scd_info, inode, cmd, arg);
- }
- return retval;
-}
-
-static int scd_block_media_changed(struct gendisk *disk)
-{
- return cdrom_media_changed(&scd_info);
-}
-
-static struct block_device_operations scd_bdops =
-{
- .owner = THIS_MODULE,
- .open = scd_block_open,
- .release = scd_block_release,
- .ioctl = scd_block_ioctl,
- .media_changed = scd_block_media_changed,
-};
-
-static struct gendisk *scd_gendisk;
-
-/* The different types of disc loading mechanisms supported */
-static char *load_mech[] __initdata =
- { "caddy", "tray", "pop-up", "unknown" };
-
-static int __init
-get_drive_configuration(unsigned short base_io,
- unsigned char res_reg[], unsigned int *res_size)
-{
- unsigned long retry_count;
-
-
- if (!request_region(base_io, 4, "cdu31a"))
- return 0;
-
- /* Set the base address */
- cdu31a_port = base_io;
-
- /* Set up all the register locations */
- sony_cd_cmd_reg = cdu31a_port + SONY_CMD_REG_OFFSET;
- sony_cd_param_reg = cdu31a_port + SONY_PARAM_REG_OFFSET;
- sony_cd_write_reg = cdu31a_port + SONY_WRITE_REG_OFFSET;
- sony_cd_control_reg = cdu31a_port + SONY_CONTROL_REG_OFFSET;
- sony_cd_status_reg = cdu31a_port + SONY_STATUS_REG_OFFSET;
- sony_cd_result_reg = cdu31a_port + SONY_RESULT_REG_OFFSET;
- sony_cd_read_reg = cdu31a_port + SONY_READ_REG_OFFSET;
- sony_cd_fifost_reg = cdu31a_port + SONY_FIFOST_REG_OFFSET;
-
- /*
- * Check to see if anything exists at the status register location.
- * I don't know if this is a good way to check, but it seems to work
- * ok for me.
- */
- if (read_status_register() != 0xff) {
- /*
- * Reset the drive and wait for attention from it (to say it's reset).
- * If you don't wait, the next operation will probably fail.
- */
- reset_drive();
- retry_count = jiffies + SONY_RESET_TIMEOUT;
- while (time_before(jiffies, retry_count)
- && (!is_attention())) {
- sony_sleep();
- }
-
-#if 0
- /* If attention is never seen probably not a CDU31a present */
- if (!is_attention()) {
- res_reg[0] = 0x20;
- goto out_err;
- }
-#endif
-
- /*
- * Get the drive configuration.
- */
- do_sony_cd_cmd(SONY_REQ_DRIVE_CONFIG_CMD,
- NULL,
- 0, (unsigned char *) res_reg, res_size);
- if (*res_size <= 2 || (res_reg[0] & 0xf0) != 0)
- goto out_err;
- return 1;
- }
-
- /* Return an error */
- res_reg[0] = 0x20;
-out_err:
- release_region(cdu31a_port, 4);
- cdu31a_port = 0;
- return 0;
-}
-
-#ifndef MODULE
-/*
- * Set up base I/O and interrupts, called from main.c.
- */
-
-static int __init cdu31a_setup(char *strings)
-{
- int ints[4];
-
- (void) get_options(strings, ARRAY_SIZE(ints), ints);
-
- if (ints[0] > 0) {
- cdu31a_port = ints[1];
- }
- if (ints[0] > 1) {
- cdu31a_irq = ints[2];
- }
- if ((strings != NULL) && (*strings != '\0')) {
- if (strcmp(strings, "PAS") == 0) {
- sony_pas_init = 1;
- } else {
- printk(KERN_NOTICE PFX "Unknown interface type: %s\n",
- strings);
- }
- }
-
- return 1;
-}
-
-__setup("cdu31a=", cdu31a_setup);
-
-#endif
-
-/*
- * Initialize the driver.
- */
-int __init cdu31a_init(void)
-{
- struct s_sony_drive_config drive_config;
- struct gendisk *disk;
- int deficiency = 0;
- unsigned int res_size;
- char msg[255];
- char buf[40];
- int i;
- int tmp_irq;
-
- /*
- * According to Alex Freed (freed@europa.orion.adobe.com), this is
- * required for the Fusion CD-16 package. If the sound driver is
- * loaded, it should work fine, but just in case...
- *
- * The following turn on the CD-ROM interface for a Fusion CD-16.
- */
- if (sony_pas_init) {
- outb(0xbc, 0x9a01);
- outb(0xe2, 0x9a01);
- }
-
- /* Setting the base I/O address to 0xffff will disable it. */
- if (cdu31a_port == 0xffff)
- goto errout3;
-
- if (cdu31a_port != 0) {
- /* Need IRQ 0 because we can't sleep here. */
- tmp_irq = cdu31a_irq;
- cdu31a_irq = 0;
- if (!get_drive_configuration(cdu31a_port,
- drive_config.exec_status,
- &res_size))
- goto errout3;
- cdu31a_irq = tmp_irq;
- } else {
- cdu31a_irq = 0;
- for (i = 0; cdu31a_addresses[i].base; i++) {
- if (get_drive_configuration(cdu31a_addresses[i].base,
- drive_config.exec_status,
- &res_size)) {
- cdu31a_irq = cdu31a_addresses[i].int_num;
- break;
- }
- }
- if (!cdu31a_port)
- goto errout3;
- }
-
- if (register_blkdev(MAJOR_NR, "cdu31a"))
- goto errout2;
-
- disk = alloc_disk(1);
- if (!disk)
- goto errout1;
- disk->major = MAJOR_NR;
- disk->first_minor = 0;
- sprintf(disk->disk_name, "cdu31a");
- disk->fops = &scd_bdops;
- disk->flags = GENHD_FL_CD;
-
- if (SONY_HWC_DOUBLE_SPEED(drive_config))
- is_double_speed = 1;
-
- tmp_irq = cdu31a_irq; /* Need IRQ 0 because we can't sleep here. */
- cdu31a_irq = 0;
-
- sony_speed = is_double_speed; /* Set 2X drives to 2X by default */
- set_drive_params(sony_speed);
-
- cdu31a_irq = tmp_irq;
-
- if (cdu31a_irq > 0) {
- if (request_irq
- (cdu31a_irq, cdu31a_interrupt, IRQF_DISABLED,
- "cdu31a", NULL)) {
- printk(KERN_WARNING PFX "Unable to grab IRQ%d for "
- "the CDU31A driver\n", cdu31a_irq);
- cdu31a_irq = 0;
- }
- }
-
- sprintf(msg, "Sony I/F CDROM : %8.8s %16.16s %8.8s\n",
- drive_config.vendor_id,
- drive_config.product_id,
- drive_config.product_rev_level);
- sprintf(buf, " Capabilities: %s",
- load_mech[SONY_HWC_GET_LOAD_MECH(drive_config)]);
- strcat(msg, buf);
- if (SONY_HWC_AUDIO_PLAYBACK(drive_config))
- strcat(msg, ", audio");
- else
- deficiency |= CDC_PLAY_AUDIO;
- if (SONY_HWC_EJECT(drive_config))
- strcat(msg, ", eject");
- else
- deficiency |= CDC_OPEN_TRAY;
- if (SONY_HWC_LED_SUPPORT(drive_config))
- strcat(msg, ", LED");
- if (SONY_HWC_ELECTRIC_VOLUME(drive_config))
- strcat(msg, ", elec. Vol");
- if (SONY_HWC_ELECTRIC_VOLUME_CTL(drive_config))
- strcat(msg, ", sep. Vol");
- if (is_double_speed)
- strcat(msg, ", double speed");
- else
- deficiency |= CDC_SELECT_SPEED;
- if (cdu31a_irq > 0) {
- sprintf(buf, ", irq %d", cdu31a_irq);
- strcat(msg, buf);
- }
- strcat(msg, "\n");
- printk(KERN_INFO PFX "%s",msg);
-
- cdu31a_queue = blk_init_queue(do_cdu31a_request, &cdu31a_lock);
- if (!cdu31a_queue)
- goto errout0;
- blk_queue_hardsect_size(cdu31a_queue, 2048);
-
- init_timer(&cdu31a_abort_timer);
- cdu31a_abort_timer.function = handle_abort_timeout;
-
- scd_info.mask = deficiency;
- scd_gendisk = disk;
- if (register_cdrom(&scd_info))
- goto err;
- disk->queue = cdu31a_queue;
- add_disk(disk);
-
- disk_changed = 1;
- return 0;
-
-err:
- blk_cleanup_queue(cdu31a_queue);
-errout0:
- if (cdu31a_irq)
- free_irq(cdu31a_irq, NULL);
- printk(KERN_ERR PFX "Unable to register with Uniform cdrom driver\n");
- put_disk(disk);
-errout1:
- if (unregister_blkdev(MAJOR_NR, "cdu31a")) {
- printk(KERN_WARNING PFX "Can't unregister block device\n");
- }
-errout2:
- release_region(cdu31a_port, 4);
-errout3:
- return -EIO;
-}
-
-
-static void __exit cdu31a_exit(void)
-{
- del_gendisk(scd_gendisk);
- put_disk(scd_gendisk);
- if (unregister_cdrom(&scd_info)) {
- printk(KERN_WARNING PFX "Can't unregister from Uniform "
- "cdrom driver\n");
- return;
- }
- if ((unregister_blkdev(MAJOR_NR, "cdu31a") == -EINVAL)) {
- printk(KERN_WARNING PFX "Can't unregister\n");
- return;
- }
-
- blk_cleanup_queue(cdu31a_queue);
-
- if (cdu31a_irq > 0)
- free_irq(cdu31a_irq, NULL);
-
- release_region(cdu31a_port, 4);
- printk(KERN_INFO PFX "module released.\n");
-}
-
-#ifdef MODULE
-module_init(cdu31a_init);
-#endif
-module_exit(cdu31a_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(CDU31A_CDROM_MAJOR);
diff --git a/drivers/cdrom/cdu31a.h b/drivers/cdrom/cdu31a.h
deleted file mode 100644
index 61d4768c412e..000000000000
--- a/drivers/cdrom/cdu31a.h
+++ /dev/null
@@ -1,411 +0,0 @@
-/*
- * Definitions for a Sony interface CDROM drive.
- *
- * Corey Minyard (minyard@wf-rch.cirr.com)
- *
- * Copyright (C) 1993 Corey Minyard
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * General defines.
- */
-#define SONY_XA_DISK_TYPE 0x20
-
-/*
- * Offsets (from the base address) and bits for the various write registers
- * of the drive.
- */
-#define SONY_CMD_REG_OFFSET 0
-#define SONY_PARAM_REG_OFFSET 1
-#define SONY_WRITE_REG_OFFSET 2
-#define SONY_CONTROL_REG_OFFSET 3
-# define SONY_ATTN_CLR_BIT 0x01
-# define SONY_RES_RDY_CLR_BIT 0x02
-# define SONY_DATA_RDY_CLR_BIT 0x04
-# define SONY_ATTN_INT_EN_BIT 0x08
-# define SONY_RES_RDY_INT_EN_BIT 0x10
-# define SONY_DATA_RDY_INT_EN_BIT 0x20
-# define SONY_PARAM_CLR_BIT 0x40
-# define SONY_DRIVE_RESET_BIT 0x80
-
-/*
- * Offsets (from the base address) and bits for the various read registers
- * of the drive.
- */
-#define SONY_STATUS_REG_OFFSET 0
-# define SONY_ATTN_BIT 0x01
-# define SONY_RES_RDY_BIT 0x02
-# define SONY_DATA_RDY_BIT 0x04
-# define SONY_ATTN_INT_ST_BIT 0x08
-# define SONY_RES_RDY_INT_ST_BIT 0x10
-# define SONY_DATA_RDY_INT_ST_BIT 0x20
-# define SONY_DATA_REQUEST_BIT 0x40
-# define SONY_BUSY_BIT 0x80
-#define SONY_RESULT_REG_OFFSET 1
-#define SONY_READ_REG_OFFSET 2
-#define SONY_FIFOST_REG_OFFSET 3
-# define SONY_PARAM_WRITE_RDY_BIT 0x01
-# define SONY_PARAM_REG_EMPTY_BIT 0x02
-# define SONY_RES_REG_NOT_EMP_BIT 0x04
-# define SONY_RES_REG_FULL_BIT 0x08
-
-#define LOG_START_OFFSET 150 /* Offset of first logical sector */
-
-#define SONY_DETECT_TIMEOUT (8*HZ/10) /* Maximum amount of time
- that drive detection code
- will wait for response
- from drive (in 1/100th's
- of seconds). */
-
-#define SONY_JIFFIES_TIMEOUT (10*HZ) /* Maximum number of times the
- drive will wait/try for an
- operation */
-#define SONY_RESET_TIMEOUT HZ /* Maximum number of times the
- drive will wait/try a reset
- operation */
-#define SONY_READY_RETRIES 20000 /* How many times to retry a
- spin waiting for a register
- to come ready */
-
-#define MAX_CDU31A_RETRIES 3 /* How many times to retry an
- operation */
-
-/* Commands to request or set drive control parameters and disc information */
-#define SONY_REQ_DRIVE_CONFIG_CMD 0x00 /* Returns s_sony_drive_config */
-#define SONY_REQ_DRIVE_MODE_CMD 0x01
-#define SONY_REQ_DRIVE_PARAM_CMD 0x02
-#define SONY_REQ_MECH_STATUS_CMD 0x03
-#define SONY_REQ_AUDIO_STATUS_CMD 0x04
-#define SONY_SET_DRIVE_PARAM_CMD 0x10
-#define SONY_REQ_TOC_DATA_CMD 0x20 /* Returns s_sony_toc */
-#define SONY_REQ_SUBCODE_ADDRESS_CMD 0x21 /* Returns s_sony_subcode */
-#define SONY_REQ_UPC_EAN_CMD 0x22
-#define SONY_REQ_ISRC_CMD 0x23
-#define SONY_REQ_TOC_DATA_SPEC_CMD 0x24 /* Returns s_sony_session_toc */
-
-/* Commands to request information from the drive */
-#define SONY_READ_TOC_CMD 0x30 /* let the drive firmware grab the TOC */
-#define SONY_SEEK_CMD 0x31
-#define SONY_READ_CMD 0x32
-#define SONY_READ_BLKERR_STAT_CMD 0x34
-#define SONY_ABORT_CMD 0x35
-#define SONY_READ_TOC_SPEC_CMD 0x36
-
-/* Commands to control audio */
-#define SONY_AUDIO_PLAYBACK_CMD 0x40
-#define SONY_AUDIO_STOP_CMD 0x41
-#define SONY_AUDIO_SCAN_CMD 0x42
-
-/* Miscellaneous control commands */
-#define SONY_EJECT_CMD 0x50
-#define SONY_SPIN_UP_CMD 0x51
-#define SONY_SPIN_DOWN_CMD 0x52
-
-/* Diagnostic commands */
-#define SONY_WRITE_BUFFER_CMD 0x60
-#define SONY_READ_BUFFER_CMD 0x61
-#define SONY_DIAGNOSTICS_CMD 0x62
-
-
-/*
- * The following are command parameters for the set drive parameter command
- */
-#define SONY_SD_DECODE_PARAM 0x00
-#define SONY_SD_INTERFACE_PARAM 0x01
-#define SONY_SD_BUFFERING_PARAM 0x02
-#define SONY_SD_AUDIO_PARAM 0x03
-#define SONY_SD_AUDIO_VOLUME 0x04
-#define SONY_SD_MECH_CONTROL 0x05
-#define SONY_SD_AUTO_SPIN_DOWN_TIME 0x06
-
-/*
- * The following are parameter bits for the mechanical control command
- */
-#define SONY_AUTO_SPIN_UP_BIT 0x01
-#define SONY_AUTO_EJECT_BIT 0x02
-#define SONY_DOUBLE_SPEED_BIT 0x04
-
-/*
- * The following extract information from the drive configuration about
- * the drive itself.
- */
-#define SONY_HWC_GET_LOAD_MECH(c) (c.hw_config[0] & 0x03)
-#define SONY_HWC_EJECT(c) (c.hw_config[0] & 0x04)
-#define SONY_HWC_LED_SUPPORT(c) (c.hw_config[0] & 0x08)
-#define SONY_HWC_DOUBLE_SPEED(c) (c.hw_config[0] & 0x10)
-#define SONY_HWC_GET_BUF_MEM_SIZE(c) ((c.hw_config[0] & 0xc0) >> 6)
-#define SONY_HWC_AUDIO_PLAYBACK(c) (c.hw_config[1] & 0x01)
-#define SONY_HWC_ELECTRIC_VOLUME(c) (c.hw_config[1] & 0x02)
-#define SONY_HWC_ELECTRIC_VOLUME_CTL(c) (c.hw_config[1] & 0x04)
-
-#define SONY_HWC_CADDY_LOAD_MECH 0x00
-#define SONY_HWC_TRAY_LOAD_MECH 0x01
-#define SONY_HWC_POPUP_LOAD_MECH 0x02
-#define SONY_HWC_UNKWN_LOAD_MECH 0x03
-
-#define SONY_HWC_8KB_BUFFER 0x00
-#define SONY_HWC_32KB_BUFFER 0x01
-#define SONY_HWC_64KB_BUFFER 0x02
-#define SONY_HWC_UNKWN_BUFFER 0x03
-
-/*
- * This is the complete status returned from the drive configuration request
- * command.
- */
-struct s_sony_drive_config
-{
- unsigned char exec_status[2];
- char vendor_id[8];
- char product_id[16];
- char product_rev_level[8];
- unsigned char hw_config[2];
-};
-
-/* The following is returned from the request subcode address command */
-struct s_sony_subcode
-{
- unsigned char exec_status[2];
- unsigned char address :4;
- unsigned char control :4;
- unsigned char track_num;
- unsigned char index_num;
- unsigned char rel_msf[3];
- unsigned char reserved1;
- unsigned char abs_msf[3];
-};
-
-#define MAX_TRACKS 100 /* The maximum tracks a disk may have. */
-/*
- * The following is returned from the request TOC (Table Of Contents) command.
- * (last_track_num-first_track_num+1) values are valid in tracks.
- */
-struct s_sony_toc
-{
- unsigned char exec_status[2];
- unsigned char address0 :4;
- unsigned char control0 :4;
- unsigned char point0;
- unsigned char first_track_num;
- unsigned char disk_type;
- unsigned char dummy0;
- unsigned char address1 :4;
- unsigned char control1 :4;
- unsigned char point1;
- unsigned char last_track_num;
- unsigned char dummy1;
- unsigned char dummy2;
- unsigned char address2 :4;
- unsigned char control2 :4;
- unsigned char point2;
- unsigned char lead_out_start_msf[3];
- struct
- {
- unsigned char address :4;
- unsigned char control :4;
- unsigned char track;
- unsigned char track_start_msf[3];
- } tracks[MAX_TRACKS];
-
- unsigned int lead_out_start_lba;
-};
-
-struct s_sony_session_toc
-{
- unsigned char exec_status[2];
- unsigned char session_number;
- unsigned char address0 :4;
- unsigned char control0 :4;
- unsigned char point0;
- unsigned char first_track_num;
- unsigned char disk_type;
- unsigned char dummy0;
- unsigned char address1 :4;
- unsigned char control1 :4;
- unsigned char point1;
- unsigned char last_track_num;
- unsigned char dummy1;
- unsigned char dummy2;
- unsigned char address2 :4;
- unsigned char control2 :4;
- unsigned char point2;
- unsigned char lead_out_start_msf[3];
- unsigned char addressb0 :4;
- unsigned char controlb0 :4;
- unsigned char pointb0;
- unsigned char next_poss_prog_area_msf[3];
- unsigned char num_mode_5_pointers;
- unsigned char max_start_outer_leadout_msf[3];
- unsigned char addressb1 :4;
- unsigned char controlb1 :4;
- unsigned char pointb1;
- unsigned char dummyb0_1[4];
- unsigned char num_skip_interval_pointers;
- unsigned char num_skip_track_assignments;
- unsigned char dummyb0_2;
- unsigned char addressb2 :4;
- unsigned char controlb2 :4;
- unsigned char pointb2;
- unsigned char tracksb2[7];
- unsigned char addressb3 :4;
- unsigned char controlb3 :4;
- unsigned char pointb3;
- unsigned char tracksb3[7];
- unsigned char addressb4 :4;
- unsigned char controlb4 :4;
- unsigned char pointb4;
- unsigned char tracksb4[7];
- unsigned char addressc0 :4;
- unsigned char controlc0 :4;
- unsigned char pointc0;
- unsigned char dummyc0[7];
- struct
- {
- unsigned char address :4;
- unsigned char control :4;
- unsigned char track;
- unsigned char track_start_msf[3];
- } tracks[MAX_TRACKS];
-
- unsigned int start_track_lba;
- unsigned int lead_out_start_lba;
- unsigned int mint;
- unsigned int maxt;
-};
-
-struct s_all_sessions_toc
-{
- unsigned char sessions;
- unsigned int track_entries;
- unsigned char first_track_num;
- unsigned char last_track_num;
- unsigned char disk_type;
- unsigned char lead_out_start_msf[3];
- struct
- {
- unsigned char address :4;
- unsigned char control :4;
- unsigned char track;
- unsigned char track_start_msf[3];
- } tracks[MAX_TRACKS];
-
- unsigned int start_track_lba;
- unsigned int lead_out_start_lba;
-};
-
-
-/*
- * The following are errors returned from the drive.
- */
-
-/* Command error group */
-#define SONY_ILL_CMD_ERR 0x10
-#define SONY_ILL_PARAM_ERR 0x11
-
-/* Mechanism group */
-#define SONY_NOT_LOAD_ERR 0x20
-#define SONY_NO_DISK_ERR 0x21
-#define SONY_NOT_SPIN_ERR 0x22
-#define SONY_SPIN_ERR 0x23
-#define SONY_SPINDLE_SERVO_ERR 0x25
-#define SONY_FOCUS_SERVO_ERR 0x26
-#define SONY_EJECT_MECH_ERR 0x29
-#define SONY_AUDIO_PLAYING_ERR 0x2a
-#define SONY_EMERGENCY_EJECT_ERR 0x2c
-
-/* Seek error group */
-#define SONY_FOCUS_ERR 0x30
-#define SONY_FRAME_SYNC_ERR 0x31
-#define SONY_SUBCODE_ADDR_ERR 0x32
-#define SONY_BLOCK_SYNC_ERR 0x33
-#define SONY_HEADER_ADDR_ERR 0x34
-
-/* Read error group */
-#define SONY_ILL_TRACK_R_ERR 0x40
-#define SONY_MODE_0_R_ERR 0x41
-#define SONY_ILL_MODE_R_ERR 0x42
-#define SONY_ILL_BLOCK_SIZE_R_ERR 0x43
-#define SONY_MODE_R_ERR 0x44
-#define SONY_FORM_R_ERR 0x45
-#define SONY_LEAD_OUT_R_ERR 0x46
-#define SONY_BUFFER_OVERRUN_R_ERR 0x47
-
-/* Data error group */
-#define SONY_UNREC_CIRC_ERR 0x53
-#define SONY_UNREC_LECC_ERR 0x57
-
-/* Subcode error group */
-#define SONY_NO_TOC_ERR 0x60
-#define SONY_SUBCODE_DATA_NVAL_ERR 0x61
-#define SONY_FOCUS_ON_TOC_READ_ERR 0x63
-#define SONY_FRAME_SYNC_ON_TOC_READ_ERR 0x64
-#define SONY_TOC_DATA_ERR 0x65
-
-/* Hardware failure group */
-#define SONY_HW_FAILURE_ERR 0x70
-#define SONY_LEAD_IN_A_ERR 0x91
-#define SONY_LEAD_OUT_A_ERR 0x92
-#define SONY_DATA_TRACK_A_ERR 0x93
-
-/*
- * The following are returned from the Read With Block Error Status command.
- * They are not errors but information (Errors from the 0x5x group above may
- * also be returned
- */
-#define SONY_NO_CIRC_ERR_BLK_STAT 0x50
-#define SONY_NO_LECC_ERR_BLK_STAT 0x54
-#define SONY_RECOV_LECC_ERR_BLK_STAT 0x55
-#define SONY_NO_ERR_DETECTION_STAT 0x59
-
-/*
- * The following is not an error returned by the drive, but by the code
- * that talks to the drive. It is returned because of a timeout.
- */
-#define SONY_TIMEOUT_OP_ERR 0x01
-#define SONY_SIGNAL_OP_ERR 0x02
-#define SONY_BAD_DATA_ERR 0x03
-
-
-/*
- * The following are attention code for asynchronous events from the drive.
- */
-
-/* Standard attention group */
-#define SONY_EMER_EJECT_ATTN 0x2c
-#define SONY_HW_FAILURE_ATTN 0x70
-#define SONY_MECH_LOADED_ATTN 0x80
-#define SONY_EJECT_PUSHED_ATTN 0x81
-
-/* Audio attention group */
-#define SONY_AUDIO_PLAY_DONE_ATTN 0x90
-#define SONY_LEAD_IN_ERR_ATTN 0x91
-#define SONY_LEAD_OUT_ERR_ATTN 0x92
-#define SONY_DATA_TRACK_ERR_ATTN 0x93
-#define SONY_AUDIO_PLAYBACK_ERR_ATTN 0x94
-
-/* Auto spin up group */
-#define SONY_SPIN_UP_COMPLETE_ATTN 0x24
-#define SONY_SPINDLE_SERVO_ERR_ATTN 0x25
-#define SONY_FOCUS_SERVO_ERR_ATTN 0x26
-#define SONY_TOC_READ_DONE_ATTN 0x62
-#define SONY_FOCUS_ON_TOC_READ_ERR_ATTN 0x63
-#define SONY_SYNC_ON_TOC_READ_ERR_ATTN 0x65
-
-/* Auto eject group */
-#define SONY_SPIN_DOWN_COMPLETE_ATTN 0x27
-#define SONY_EJECT_COMPLETE_ATTN 0x28
-#define SONY_EJECT_MECH_ERR_ATTN 0x29
diff --git a/drivers/cdrom/cm206.c b/drivers/cdrom/cm206.c
deleted file mode 100644
index 2f8fe3b6bbd0..000000000000
--- a/drivers/cdrom/cm206.c
+++ /dev/null
@@ -1,1594 +0,0 @@
-/* cm206.c. A linux-driver for the cm206 cdrom player with cm260 adapter card.
- Copyright (c) 1995--1997 David A. van Leeuwen.
- $Id: cm206.c,v 1.5 1997/12/26 11:02:51 david Exp $
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-History:
- Started 25 jan 1994. Waiting for documentation...
- 22 feb 1995: 0.1a first reasonably safe polling driver.
- Two major bugs, one in read_sector and one in
- do_cm206_request, happened to cancel!
- 25 feb 1995: 0.2a first reasonable interrupt driven version of above.
- uart writes are still done in polling mode.
- 25 feb 1995: 0.21a writes also in interrupt mode, still some
- small bugs to be found... Larger buffer.
- 2 mrt 1995: 0.22 Bug found (cd-> nowhere, interrupt was called in
- initialization), read_ahead of 16. Timeouts implemented.
- unclear if they do something...
- 7 mrt 1995: 0.23 Start of background read-ahead.
- 18 mrt 1995: 0.24 Working background read-ahead. (still problems)
- 26 mrt 1995: 0.25 Multi-session ioctl added (kernel v1.2).
- Statistics implemented, though separate stats206.h.
- Accessible through ioctl 0x1000 (just a number).
- Hard to choose between v1.2 development and 1.1.75.
- Bottom-half doesn't work with 1.2...
- 0.25a: fixed... typo. Still problems...
- 1 apr 1995: 0.26 Module support added. Most bugs found. Use kernel 1.2.n.
- 5 apr 1995: 0.27 Auto-probe for the adapter card base address.
- Auto-probe for the adaptor card irq line.
- 7 apr 1995: 0.28 Added lilo setup support for base address and irq.
- Use major number 32 (not in this source), officially
- assigned to this driver.
- 9 apr 1995: 0.29 Added very limited audio support. Toc_header, stop, pause,
- resume, eject. Play_track ignores track info, because we can't
- read a table-of-contents entry. Toc_entry is implemented
- as a `placebo' function: always returns start of disc.
- 3 may 1995: 0.30 Audio support completed. The get_toc_entry function
- is implemented as a binary search.
- 15 may 1995: 0.31 More work on audio stuff. Workman is not easy to
- satisfy; changed binary search into linear search.
- Auto-probe for base address somewhat relaxed.
- 1 jun 1995: 0.32 Removed probe_irq_on/off for module version.
- 10 jun 1995: 0.33 Workman still behaves funny, but you should be
- able to eject and substitute another disc.
-
- An adaptation of 0.33 is included in linux-1.3.7 by Eberhard Moenkeberg
-
- 18 jul 1995: 0.34 Patch by Heiko Eissfeldt included, mainly considering
- verify_area's in the ioctls. Some bugs introduced by
- EM considering the base port and irq fixed.
-
- 18 dec 1995: 0.35 Add some code for error checking... no luck...
-
- We jump to reach our goal: version 1.0 in the next stable linux kernel.
-
- 19 mar 1996: 0.95 Different implementation of CDROM_GET_UPC, on
- request of Thomas Quinot.
- 25 mar 1996: 0.96 Interpretation of opening with O_WRONLY or O_RDWR:
- open only for ioctl operation, e.g., for operation of
- tray etc.
- 4 apr 1996: 0.97 First implementation of layer between VFS and cdrom
- driver, a generic interface. Much of the functionality
- of cm206_open() and cm206_ioctl() is transferred to a
- new file cdrom.c and its header ucdrom.h.
-
- Upgrade to Linux kernel 1.3.78.
-
- 11 apr 1996 0.98 Upgrade to Linux kernel 1.3.85
- More code moved to cdrom.c
-
- 0.99 Some more small changes to decrease number
- of oopses at module load;
-
- 27 jul 1996 0.100 Many hours of debugging, kernel change from 1.2.13
- to 2.0.7 seems to have introduced some weird behavior
- in (interruptible_)sleep_on(&cd->data): the process
- seems to be woken without any explicit wake_up in my own
- code. Patch to try 100x in case such untriggered wake_up's
- occur.
-
- 28 jul 1996 0.101 Rewriting of the code that receives the command echo,
- using a fifo to store echoed bytes.
-
- Branch from 0.99:
-
- 0.99.1.0 Update to kernel release 2.0.10 dev_t -> kdev_t
- (emoenke) various typos found by others. extra
- module-load oops protection.
-
- 0.99.1.1 Initialization constant cdrom_dops.speed
- changed from float (2.0) to int (2); Cli()-sti() pair
- around cm260_reset() in module initialization code.
-
- 0.99.1.2 Changes literally as proposed by Scott Snyder
- <snyder@d0sgif.fnal.gov> for the 2.1 kernel line, which
- have to do mainly with the poor minor support i had. The
- major new concept is to change a cdrom driver's
- operations struct from the capabilities struct. This
- reflects the fact that there is one major for a driver,
- whilst there can be many minors whith completely
- different capabilities.
-
- 0.99.1.3 More changes for operations/info separation.
-
- 0.99.1.4 Added speed selection (someone had to do this
- first).
-
- 23 jan 1997 0.99.1.5 MODULE_PARMS call added.
-
- 23 jan 1997 0.100.1.2--0.100.1.5 following similar lines as
- 0.99.1.1--0.99.1.5. I get too many complaints about the
- drive making read errors. What't wrong with the 2.0+
- kernel line? Why get i (and othe cm206 owners) weird
- results? Why were things good in the good old 1.1--1.2
- era? Why don't i throw away the drive?
-
- 2 feb 1997 0.102 Added `volatile' to values in cm206_struct. Seems to
- reduce many of the problems. Rewrote polling routines
- to use fixed delays between polls.
- 0.103 Changed printk behavior.
- 0.104 Added a 0.100 -> 0.100.1.1 change
-
-11 feb 1997 0.105 Allow auto_probe during module load, disable
- with module option "auto_probe=0". Moved some debugging
- statements to lower priority. Implemented select_speed()
- function.
-
-13 feb 1997 1.0 Final version for 2.0 kernel line.
-
- All following changes will be for the 2.1 kernel line.
-
-15 feb 1997 1.1 Keep up with kernel 2.1.26, merge in changes from
- cdrom.c 0.100.1.1--1.0. Add some more MODULE_PARMS.
-
-14 sep 1997 1.2 Upgrade to Linux 2.1.55. Added blksize_size[], patch
- sent by James Bottomley <James.Bottomley@columbiasc.ncr.com>.
-
-21 dec 1997 1.4 Upgrade to Linux 2.1.72.
-
-24 jan 1998 Removed the cm206_disc_status() function, as it was now dead
- code. The Uniform CDROM driver now provides this functionality.
-
-9 Nov. 1999 Make kernel-parameter implementation work with 2.3.x
- Removed init_module & cleanup_module in favor of
- module_init & module_exit.
- Torben Mathiasen <tmm@image.dk>
- *
- * Parts of the code are based upon lmscd.c written by Kai Petzke,
- * sbpcd.c written by Eberhard Moenkeberg, and mcd.c by Martin
- * Harriss, but any off-the-shelf dynamic programming algorithm won't
- * be able to find them.
- *
- * The cm206 drive interface and the cm260 adapter card seem to be
- * sufficiently different from their cm205/cm250 counterparts
- * in order to write a complete new driver.
- *
- * I call all routines connected to the Linux kernel something
- * with `cm206' in it, as this stuff is too series-dependent.
- *
- * Currently, my limited knowledge is based on:
- * - The Linux Kernel Hacker's guide, v. 0.5, by Michael K. Johnson
- * - Linux Kernel Programmierung, by Michael Beck and others
- * - Philips/LMS cm206 and cm226 product specification
- * - Philips/LMS cm260 product specification
- *
- * David van Leeuwen, david@tm.tno.nl. */
-#define REVISION "$Revision: 1.5 $"
-
-#include <linux/module.h>
-
-#include <linux/errno.h> /* These include what we really need */
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-
-/* #include <linux/ucdrom.h> */
-
-#include <asm/io.h>
-
-#define MAJOR_NR CM206_CDROM_MAJOR
-
-#include <linux/blkdev.h>
-
-#undef DEBUG
-#define STATISTICS /* record times and frequencies of events */
-#define AUTO_PROBE_MODULE
-#define USE_INSW
-
-#include "cm206.h"
-
-/* This variable defines whether or not to probe for adapter base port
- address and interrupt request. It can be overridden by the boot
- parameter `auto'.
-*/
-static int auto_probe = 1; /* Yes, why not? */
-
-static int cm206_base = CM206_BASE;
-static int cm206_irq = CM206_IRQ;
-#ifdef MODULE
-static int cm206[2] = { 0, 0 }; /* for compatible `insmod' parameter passing */
-module_param_array(cm206, int, NULL, 0); /* base,irq or irq,base */
-#endif
-
-module_param(cm206_base, int, 0); /* base */
-module_param(cm206_irq, int, 0); /* irq */
-module_param(auto_probe, bool, 0); /* auto probe base and irq */
-MODULE_LICENSE("GPL");
-
-#define POLLOOP 100 /* milliseconds */
-#define READ_AHEAD 1 /* defines private buffer, waste! */
-#define BACK_AHEAD 1 /* defines adapter-read ahead */
-#define DATA_TIMEOUT (3*HZ) /* measured in jiffies (10 ms) */
-#define UART_TIMEOUT (5*HZ/100)
-#define DSB_TIMEOUT (7*HZ) /* time for the slowest command to finish */
-#define UR_SIZE 4 /* uart receive buffer fifo size */
-
-#define LINUX_BLOCK_SIZE 512 /* WHERE is this defined? */
-#define RAW_SECTOR_SIZE 2352 /* ok, is also defined in cdrom.h */
-#define ISO_SECTOR_SIZE 2048
-#define BLOCKS_ISO (ISO_SECTOR_SIZE/LINUX_BLOCK_SIZE) /* 4 */
-#define CD_SYNC_HEAD 16 /* CD_SYNC + CD_HEAD */
-
-#ifdef STATISTICS /* keep track of errors in counters */
-#define stats(i) { ++cd->stats[st_ ## i]; \
- cd->last_stat[st_ ## i] = cd->stat_counter++; \
- }
-#else
-#define stats(i) (void) 0;
-#endif
-
-#define Debug(a) {printk (KERN_DEBUG); printk a;}
-#ifdef DEBUG
-#define debug(a) Debug(a)
-#else
-#define debug(a) (void) 0;
-#endif
-
-typedef unsigned char uch; /* 8-bits */
-typedef unsigned short ush; /* 16-bits */
-
-struct toc_struct { /* private copy of Table of Contents */
- uch track, fsm[3], q0;
-};
-
-struct cm206_struct {
- volatile ush intr_ds; /* data status read on last interrupt */
- volatile ush intr_ls; /* uart line status read on last interrupt */
- volatile uch ur[UR_SIZE]; /* uart receive buffer fifo */
- volatile uch ur_w, ur_r; /* write/read buffer index */
- volatile uch dsb, cc; /* drive status byte and condition (error) code */
- int command; /* command to be written to the uart */
- int openfiles;
- ush sector[READ_AHEAD * RAW_SECTOR_SIZE / 2]; /* buffered cd-sector */
- int sector_first, sector_last; /* range of these sectors */
- wait_queue_head_t uart; /* wait queues for interrupt */
- wait_queue_head_t data;
- struct timer_list timer; /* time-out */
- char timed_out;
- signed char max_sectors; /* number of sectors that fit in adapter mem */
- char wait_back; /* we're waiting for a background-read */
- char background; /* is a read going on in the background? */
- int adapter_first; /* if so, that's the starting sector */
- int adapter_last;
- char fifo_overflowed;
- uch disc_status[7]; /* result of get_disc_status command */
-#ifdef STATISTICS
- int stats[NR_STATS];
- int last_stat[NR_STATS]; /* `time' at which stat was stat */
- int stat_counter;
-#endif
- struct toc_struct toc[101]; /* The whole table of contents + lead-out */
- uch q[10]; /* Last read q-channel info */
- uch audio_status[5]; /* last read position on pause */
- uch media_changed; /* record if media changed */
-};
-
-#define DISC_STATUS cd->disc_status[0]
-#define FIRST_TRACK cd->disc_status[1]
-#define LAST_TRACK cd->disc_status[2]
-#define PAUSED cd->audio_status[0] /* misuse this memory byte! */
-#define PLAY_TO cd->toc[0] /* toc[0] records end-time in play */
-
-static struct cm206_struct *cd; /* the main memory structure */
-static struct request_queue *cm206_queue;
-static DEFINE_SPINLOCK(cm206_lock);
-
-/* First, we define some polling functions. These are actually
- only being used in the initialization. */
-
-static void send_command_polled(int command)
-{
- int loop = POLLOOP;
- while (!(inw(r_line_status) & ls_transmitter_buffer_empty)
- && loop > 0) {
- mdelay(1); /* one millisec delay */
- --loop;
- }
- outw(command, r_uart_transmit);
-}
-
-static uch receive_echo_polled(void)
-{
- int loop = POLLOOP;
- while (!(inw(r_line_status) & ls_receive_buffer_full) && loop > 0) {
- mdelay(1);
- --loop;
- }
- return ((uch) inw(r_uart_receive));
-}
-
-static uch send_receive_polled(int command)
-{
- send_command_polled(command);
- return receive_echo_polled();
-}
-
-static inline void clear_ur(void)
-{
- if (cd->ur_r != cd->ur_w) {
- debug(("Deleting bytes from fifo:"));
- for (; cd->ur_r != cd->ur_w;
- cd->ur_r++, cd->ur_r %= UR_SIZE)
- debug((" 0x%x", cd->ur[cd->ur_r]));
- debug(("\n"));
- }
-}
-
-static struct tasklet_struct cm206_tasklet;
-
-/* The interrupt handler. When the cm260 generates an interrupt, very
- much care has to be taken in reading out the registers in the right
- order; in case of a receive_buffer_full interrupt, first the
- uart_receive must be read, and then the line status again to
- de-assert the interrupt line. It took me a couple of hours to find
- this out:-(
-
- The function reset_cm206 appears to cause an interrupt, because
- pulling up the INIT line clears both the uart-write-buffer /and/
- the uart-write-buffer-empty mask. We call this a `lost interrupt,'
- as there seems so reason for this to happen.
-*/
-
-static irqreturn_t cm206_interrupt(int sig, void *dev_id)
-{
- volatile ush fool;
- cd->intr_ds = inw(r_data_status); /* resets data_ready, data_error,
- crc_error, sync_error, toc_ready
- interrupts */
- cd->intr_ls = inw(r_line_status); /* resets overrun bit */
- debug(("Intr, 0x%x 0x%x, %d\n", cd->intr_ds, cd->intr_ls,
- cd->background));
- if (cd->intr_ls & ls_attention)
- stats(attention);
- /* receive buffer full? */
- if (cd->intr_ls & ls_receive_buffer_full) {
- cd->ur[cd->ur_w] = inb(r_uart_receive); /* get order right! */
- cd->intr_ls = inw(r_line_status); /* resets rbf interrupt */
- debug(("receiving #%d: 0x%x\n", cd->ur_w,
- cd->ur[cd->ur_w]));
- cd->ur_w++;
- cd->ur_w %= UR_SIZE;
- if (cd->ur_w == cd->ur_r)
- debug(("cd->ur overflow!\n"));
- if (waitqueue_active(&cd->uart) && cd->background < 2) {
- del_timer(&cd->timer);
- wake_up_interruptible(&cd->uart);
- }
- }
- /* data ready in fifo? */
- else if (cd->intr_ds & ds_data_ready) {
- if (cd->background)
- ++cd->adapter_last;
- if (waitqueue_active(&cd->data)
- && (cd->wait_back || !cd->background)) {
- del_timer(&cd->timer);
- wake_up_interruptible(&cd->data);
- }
- stats(data_ready);
- }
- /* ready to issue a write command? */
- else if (cd->command && cd->intr_ls & ls_transmitter_buffer_empty) {
- outw(dc_normal | (inw(r_data_status) & 0x7f),
- r_data_control);
- outw(cd->command, r_uart_transmit);
- cd->command = 0;
- if (!cd->background)
- wake_up_interruptible(&cd->uart);
- }
- /* now treat errors (at least, identify them for debugging) */
- else if (cd->intr_ds & ds_fifo_overflow) {
- debug(("Fifo overflow at sectors 0x%x\n",
- cd->sector_first));
- fool = inw(r_fifo_output_buffer); /* de-assert the interrupt */
- cd->fifo_overflowed = 1; /* signal one word less should be read */
- stats(fifo_overflow);
- } else if (cd->intr_ds & ds_data_error) {
- debug(("Data error at sector 0x%x\n", cd->sector_first));
- stats(data_error);
- } else if (cd->intr_ds & ds_crc_error) {
- debug(("CRC error at sector 0x%x\n", cd->sector_first));
- stats(crc_error);
- } else if (cd->intr_ds & ds_sync_error) {
- debug(("Sync at sector 0x%x\n", cd->sector_first));
- stats(sync_error);
- } else if (cd->intr_ds & ds_toc_ready) {
- /* do something appropriate */
- }
- /* couldn't see why this interrupt, maybe due to init */
- else {
- outw(dc_normal | READ_AHEAD, r_data_control);
- stats(lost_intr);
- }
- if (cd->background
- && (cd->adapter_last - cd->adapter_first == cd->max_sectors
- || cd->fifo_overflowed))
- tasklet_schedule(&cm206_tasklet); /* issue a stop read command */
- stats(interrupt);
- return IRQ_HANDLED;
-}
-
-/* we have put the address of the wait queue in who */
-static void cm206_timeout(unsigned long who)
-{
- cd->timed_out = 1;
- debug(("Timing out\n"));
- wake_up_interruptible((wait_queue_head_t *) who);
-}
-
-/* This function returns 1 if a timeout occurred, 0 if an interrupt
- happened */
-static int sleep_or_timeout(wait_queue_head_t * wait, int timeout)
-{
- cd->timed_out = 0;
- init_timer(&cd->timer);
- cd->timer.data = (unsigned long) wait;
- cd->timer.expires = jiffies + timeout;
- add_timer(&cd->timer);
- debug(("going to sleep\n"));
- interruptible_sleep_on(wait);
- del_timer(&cd->timer);
- if (cd->timed_out) {
- cd->timed_out = 0;
- return 1;
- } else
- return 0;
-}
-
-static void send_command(int command)
-{
- debug(("Sending 0x%x\n", command));
- if (!(inw(r_line_status) & ls_transmitter_buffer_empty)) {
- cd->command = command;
- cli(); /* don't interrupt before sleep */
- outw(dc_mask_sync_error | dc_no_stop_on_error |
- (inw(r_data_status) & 0x7f), r_data_control);
- /* interrupt routine sends command */
- if (sleep_or_timeout(&cd->uart, UART_TIMEOUT)) {
- debug(("Time out on write-buffer\n"));
- stats(write_timeout);
- outw(command, r_uart_transmit);
- }
- debug(("Write commmand delayed\n"));
- } else
- outw(command, r_uart_transmit);
-}
-
-static uch receive_byte(int timeout)
-{
- uch ret;
- cli();
- debug(("cli\n"));
- ret = cd->ur[cd->ur_r];
- if (cd->ur_r != cd->ur_w) {
- sti();
- debug(("returning #%d: 0x%x\n", cd->ur_r,
- cd->ur[cd->ur_r]));
- cd->ur_r++;
- cd->ur_r %= UR_SIZE;
- return ret;
- } else if (sleep_or_timeout(&cd->uart, timeout)) { /* does sti() */
- debug(("Time out on receive-buffer\n"));
-#ifdef STATISTICS
- if (timeout == UART_TIMEOUT)
- stats(receive_timeout) /* no `;'! */
- else
- stats(dsb_timeout);
-#endif
- return 0xda;
- }
- ret = cd->ur[cd->ur_r];
- debug(("slept; returning #%d: 0x%x\n", cd->ur_r,
- cd->ur[cd->ur_r]));
- cd->ur_r++;
- cd->ur_r %= UR_SIZE;
- return ret;
-}
-
-static inline uch receive_echo(void)
-{
- return receive_byte(UART_TIMEOUT);
-}
-
-static inline uch send_receive(int command)
-{
- send_command(command);
- return receive_echo();
-}
-
-static inline uch wait_dsb(void)
-{
- return receive_byte(DSB_TIMEOUT);
-}
-
-static int type_0_command(int command, int expect_dsb)
-{
- int e;
- clear_ur();
- if (command != (e = send_receive(command))) {
- debug(("command 0x%x echoed as 0x%x\n", command, e));
- stats(echo);
- return -1;
- }
- if (expect_dsb) {
- cd->dsb = wait_dsb(); /* wait for command to finish */
- }
- return 0;
-}
-
-static int type_1_command(int command, int bytes, uch * status)
-{ /* returns info */
- int i;
- if (type_0_command(command, 0))
- return -1;
- for (i = 0; i < bytes; i++)
- status[i] = send_receive(c_gimme);
- return 0;
-}
-
-/* This function resets the adapter card. We'd better not do this too
- * often, because it tends to generate `lost interrupts.' */
-static void reset_cm260(void)
-{
- outw(dc_normal | dc_initialize | READ_AHEAD, r_data_control);
- udelay(10); /* 3.3 mu sec minimum */
- outw(dc_normal | READ_AHEAD, r_data_control);
-}
-
-/* fsm: frame-sec-min from linear address; one of many */
-static void fsm(int lba, uch * fsm)
-{
- fsm[0] = lba % 75;
- lba /= 75;
- lba += 2;
- fsm[1] = lba % 60;
- fsm[2] = lba / 60;
-}
-
-static inline int fsm2lba(uch * fsm)
-{
- return fsm[0] + 75 * (fsm[1] - 2 + 60 * fsm[2]);
-}
-
-static inline int f_s_m2lba(uch f, uch s, uch m)
-{
- return f + 75 * (s - 2 + 60 * m);
-}
-
-static int start_read(int start)
-{
- uch read_sector[4] = { c_read_data, };
- int i, e;
-
- fsm(start, &read_sector[1]);
- clear_ur();
- for (i = 0; i < 4; i++)
- if (read_sector[i] != (e = send_receive(read_sector[i]))) {
- debug(("read_sector: %x echoes %x\n",
- read_sector[i], e));
- stats(echo);
- if (e == 0xff) { /* this seems to happen often */
- e = receive_echo();
- debug(("Second try %x\n", e));
- if (e != read_sector[i])
- return -1;
- }
- }
- return 0;
-}
-
-static int stop_read(void)
-{
- int e;
- type_0_command(c_stop, 0);
- if ((e = receive_echo()) != 0xff) {
- debug(("c_stop didn't send 0xff, but 0x%x\n", e));
- stats(stop_0xff);
- return -1;
- }
- return 0;
-}
-
-/* This function starts to read sectors in adapter memory, the
- interrupt routine should stop the read. In fact, the bottom_half
- routine takes care of this. Set a flag `background' in the cd
- struct to indicate the process. */
-
-static int read_background(int start, int reading)
-{
- if (cd->background)
- return -1; /* can't do twice */
- outw(dc_normal | BACK_AHEAD, r_data_control);
- if (!reading && start_read(start))
- return -2;
- cd->adapter_first = cd->adapter_last = start;
- cd->background = 1; /* flag a read is going on */
- return 0;
-}
-
-#ifdef USE_INSW
-#define transport_data insw
-#else
-/* this routine implements insw(,,). There was a time i had the
- impression that there would be any difference in error-behaviour. */
-void transport_data(int port, ush * dest, int count)
-{
- int i;
- ush *d;
- for (i = 0, d = dest; i < count; i++, d++)
- *d = inw(port);
-}
-#endif
-
-
-#define MAX_TRIES 100
-static int read_sector(int start)
-{
- int tries = 0;
- if (cd->background) {
- cd->background = 0;
- cd->adapter_last = -1; /* invalidate adapter memory */
- stop_read();
- }
- cd->fifo_overflowed = 0;
- reset_cm260(); /* empty fifo etc. */
- if (start_read(start))
- return -1;
- do {
- if (sleep_or_timeout(&cd->data, DATA_TIMEOUT)) {
- debug(("Read timed out sector 0x%x\n", start));
- stats(read_timeout);
- stop_read();
- return -3;
- }
- tries++;
- } while (cd->intr_ds & ds_fifo_empty && tries < MAX_TRIES);
- if (tries > 1)
- debug(("Took me some tries\n"))
- else
- if (tries == MAX_TRIES)
- debug(("MAX_TRIES tries for read sector\n"));
- transport_data(r_fifo_output_buffer, cd->sector,
- READ_AHEAD * RAW_SECTOR_SIZE / 2);
- if (read_background(start + READ_AHEAD, 1))
- stats(read_background);
- cd->sector_first = start;
- cd->sector_last = start + READ_AHEAD;
- stats(read_restarted);
- return 0;
-}
-
-/* The function of bottom-half is to send a stop command to the drive
- This isn't easy because the routine is not `owned' by any process;
- we can't go to sleep! The variable cd->background gives the status:
- 0 no read pending
- 1 a read is pending
- 2 c_stop waits for write_buffer_empty
- 3 c_stop waits for receive_buffer_full: echo
- 4 c_stop waits for receive_buffer_full: 0xff
-*/
-
-static void cm206_tasklet_func(unsigned long ignore)
-{
- debug(("bh: %d\n", cd->background));
- switch (cd->background) {
- case 1:
- stats(bh);
- if (!(cd->intr_ls & ls_transmitter_buffer_empty)) {
- cd->command = c_stop;
- outw(dc_mask_sync_error | dc_no_stop_on_error |
- (inw(r_data_status) & 0x7f), r_data_control);
- cd->background = 2;
- break; /* we'd better not time-out here! */
- } else
- outw(c_stop, r_uart_transmit);
- /* fall into case 2: */
- case 2:
- /* the write has been satisfied by interrupt routine */
- cd->background = 3;
- break;
- case 3:
- if (cd->ur_r != cd->ur_w) {
- if (cd->ur[cd->ur_r] != c_stop) {
- debug(("cm206_bh: c_stop echoed 0x%x\n",
- cd->ur[cd->ur_r]));
- stats(echo);
- }
- cd->ur_r++;
- cd->ur_r %= UR_SIZE;
- }
- cd->background++;
- break;
- case 4:
- if (cd->ur_r != cd->ur_w) {
- if (cd->ur[cd->ur_r] != 0xff) {
- debug(("cm206_bh: c_stop reacted with 0x%x\n", cd->ur[cd->ur_r]));
- stats(stop_0xff);
- }
- cd->ur_r++;
- cd->ur_r %= UR_SIZE;
- }
- cd->background = 0;
- }
-}
-
-static DECLARE_TASKLET(cm206_tasklet, cm206_tasklet_func, 0);
-
-/* This command clears the dsb_possible_media_change flag, so we must
- * retain it.
- */
-static void get_drive_status(void)
-{
- uch status[2];
- type_1_command(c_drive_status, 2, status); /* this might be done faster */
- cd->dsb = status[0];
- cd->cc = status[1];
- cd->media_changed |=
- !!(cd->dsb & (dsb_possible_media_change |
- dsb_drive_not_ready | dsb_tray_not_closed));
-}
-
-static void get_disc_status(void)
-{
- if (type_1_command(c_disc_status, 7, cd->disc_status)) {
- debug(("get_disc_status: error\n"));
- }
-}
-
-/* The new open. The real opening strategy is defined in cdrom.c. */
-
-static int cm206_open(struct cdrom_device_info *cdi, int purpose)
-{
- if (!cd->openfiles) { /* reset only first time */
- cd->background = 0;
- reset_cm260();
- cd->adapter_last = -1; /* invalidate adapter memory */
- cd->sector_last = -1;
- }
- ++cd->openfiles;
- stats(open);
- return 0;
-}
-
-static void cm206_release(struct cdrom_device_info *cdi)
-{
- if (cd->openfiles == 1) {
- if (cd->background) {
- cd->background = 0;
- stop_read();
- }
- cd->sector_last = -1; /* Make our internal buffer invalid */
- FIRST_TRACK = 0; /* No valid disc status */
- }
- --cd->openfiles;
-}
-
-/* Empty buffer empties $sectors$ sectors of the adapter card buffer,
- * and then reads a sector in kernel memory. */
-static void empty_buffer(int sectors)
-{
- while (sectors >= 0) {
- transport_data(r_fifo_output_buffer,
- cd->sector + cd->fifo_overflowed,
- RAW_SECTOR_SIZE / 2 - cd->fifo_overflowed);
- --sectors;
- ++cd->adapter_first; /* update the current adapter sector */
- cd->fifo_overflowed = 0; /* reset overflow bit */
- stats(sector_transferred);
- }
- cd->sector_first = cd->adapter_first - 1;
- cd->sector_last = cd->adapter_first; /* update the buffer sector */
-}
-
-/* try_adapter. This function determines if the requested sector is
- in adapter memory, or will appear there soon. Returns 0 upon
- success */
-static int try_adapter(int sector)
-{
- if (cd->adapter_first <= sector && sector < cd->adapter_last) {
- /* sector is in adapter memory */
- empty_buffer(sector - cd->adapter_first);
- return 0;
- } else if (cd->background == 1 && cd->adapter_first <= sector
- && sector < cd->adapter_first + cd->max_sectors) {
- /* a read is going on, we can wait for it */
- cd->wait_back = 1;
- while (sector >= cd->adapter_last) {
- if (sleep_or_timeout(&cd->data, DATA_TIMEOUT)) {
- debug(("Timed out during background wait: %d %d %d %d\n", sector, cd->adapter_last, cd->adapter_first, cd->background));
- stats(back_read_timeout);
- cd->wait_back = 0;
- return -1;
- }
- }
- cd->wait_back = 0;
- empty_buffer(sector - cd->adapter_first);
- return 0;
- } else
- return -2;
-}
-
-/* This is not a very smart implementation. We could optimize for
- consecutive block numbers. I'm not convinced this would really
- bring down the processor load. */
-static void do_cm206_request(request_queue_t * q)
-{
- long int i, cd_sec_no;
- int quarter, error;
- uch *source, *dest;
- struct request *req;
-
- while (1) { /* repeat until all requests have been satisfied */
- req = elv_next_request(q);
- if (!req)
- return;
-
- if (rq_data_dir(req) != READ) {
- debug(("Non-read command %d on cdrom\n", req->cmd));
- end_request(req, 0);
- continue;
- }
- spin_unlock_irq(q->queue_lock);
- error = 0;
- for (i = 0; i < req->nr_sectors; i++) {
- int e1, e2;
- cd_sec_no = (req->sector + i) / BLOCKS_ISO; /* 4 times 512 bytes */
- quarter = (req->sector + i) % BLOCKS_ISO;
- dest = req->buffer + i * LINUX_BLOCK_SIZE;
- /* is already in buffer memory? */
- if (cd->sector_first <= cd_sec_no
- && cd_sec_no < cd->sector_last) {
- source =
- ((uch *) cd->sector) + 16 +
- quarter * LINUX_BLOCK_SIZE +
- (cd_sec_no -
- cd->sector_first) * RAW_SECTOR_SIZE;
- memcpy(dest, source, LINUX_BLOCK_SIZE);
- } else if (!(e1 = try_adapter(cd_sec_no)) ||
- !(e2 = read_sector(cd_sec_no))) {
- source =
- ((uch *) cd->sector) + 16 +
- quarter * LINUX_BLOCK_SIZE;
- memcpy(dest, source, LINUX_BLOCK_SIZE);
- } else {
- error = 1;
- debug(("cm206_request: %d %d\n", e1, e2));
- }
- }
- spin_lock_irq(q->queue_lock);
- end_request(req, !error);
- }
-}
-
-/* Audio support. I've tried very hard, but the cm206 drive doesn't
- seem to have a get_toc (table-of-contents) function, while i'm
- pretty sure it must read the toc upon disc insertion. Therefore
- this function has been implemented through a binary search
- strategy. All track starts that happen to be found are stored in
- cd->toc[], for future use.
-
- I've spent a whole day on a bug that only shows under Workman---
- I don't get it. Tried everything, nothing works. If workman asks
- for track# 0xaa, it'll get the wrong time back. Any other program
- receives the correct value. I'm stymied.
-*/
-
-/* seek seeks to address lba. It does wait to arrive there. */
-static void seek(int lba)
-{
- int i;
- uch seek_command[4] = { c_seek, };
-
- fsm(lba, &seek_command[1]);
- for (i = 0; i < 4; i++)
- type_0_command(seek_command[i], 0);
- cd->dsb = wait_dsb();
-}
-
-static uch bcdbin(unsigned char bcd)
-{ /* stolen from mcd.c! */
- return (bcd >> 4) * 10 + (bcd & 0xf);
-}
-
-static inline uch normalize_track(uch track)
-{
- if (track < 1)
- return 1;
- if (track > LAST_TRACK)
- return LAST_TRACK + 1;
- return track;
-}
-
-/* This function does a binary search for track start. It records all
- * tracks seen in the process. Input $track$ must be between 1 and
- * #-of-tracks+1. Note that the start of the disc must be in toc[1].fsm.
- */
-static int get_toc_lba(uch track)
-{
- int max = 74 * 60 * 75 - 150, min = fsm2lba(cd->toc[1].fsm);
- int i, lba, l, old_lba = 0;
- uch *q = cd->q;
- uch ct; /* current track */
- int binary = 0;
- const int skip = 3 * 60 * 75; /* 3 minutes */
-
- for (i = track; i > 0; i--)
- if (cd->toc[i].track) {
- min = fsm2lba(cd->toc[i].fsm);
- break;
- }
- lba = min + skip;
- do {
- seek(lba);
- type_1_command(c_read_current_q, 10, q);
- ct = normalize_track(q[1]);
- if (!cd->toc[ct].track) {
- l = q[9] - bcdbin(q[5]) + 75 * (q[8] -
- bcdbin(q[4]) - 2 +
- 60 * (q[7] -
- bcdbin(q
- [3])));
- cd->toc[ct].track = q[1]; /* lead out still 0xaa */
- fsm(l, cd->toc[ct].fsm);
- cd->toc[ct].q0 = q[0]; /* contains adr and ctrl info */
- if (ct == track)
- return l;
- }
- old_lba = lba;
- if (binary) {
- if (ct < track)
- min = lba;
- else
- max = lba;
- lba = (min + max) / 2;
- } else {
- if (ct < track)
- lba += skip;
- else {
- binary = 1;
- max = lba;
- min = lba - skip;
- lba = (min + max) / 2;
- }
- }
- } while (lba != old_lba);
- return lba;
-}
-
-static void update_toc_entry(uch track)
-{
- track = normalize_track(track);
- if (!cd->toc[track].track)
- get_toc_lba(track);
-}
-
-/* return 0 upon success */
-static int read_toc_header(struct cdrom_tochdr *hp)
-{
- if (!FIRST_TRACK)
- get_disc_status();
- if (hp) {
- int i;
- hp->cdth_trk0 = FIRST_TRACK;
- hp->cdth_trk1 = LAST_TRACK;
- /* fill in first track position */
- for (i = 0; i < 3; i++)
- cd->toc[1].fsm[i] = cd->disc_status[3 + i];
- update_toc_entry(LAST_TRACK + 1); /* find most entries */
- return 0;
- }
- return -1;
-}
-
-static void play_from_to_msf(struct cdrom_msf *msfp)
-{
- uch play_command[] = { c_play,
- msfp->cdmsf_frame0, msfp->cdmsf_sec0, msfp->cdmsf_min0,
- msfp->cdmsf_frame1, msfp->cdmsf_sec1, msfp->cdmsf_min1, 2,
- 2
- };
- int i;
- for (i = 0; i < 9; i++)
- type_0_command(play_command[i], 0);
- for (i = 0; i < 3; i++)
- PLAY_TO.fsm[i] = play_command[i + 4];
- PLAY_TO.track = 0; /* say no track end */
- cd->dsb = wait_dsb();
-}
-
-static void play_from_to_track(int from, int to)
-{
- uch play_command[8] = { c_play, };
- int i;
-
- if (from == 0) { /* continue paused play */
- for (i = 0; i < 3; i++) {
- play_command[i + 1] = cd->audio_status[i + 2];
- play_command[i + 4] = PLAY_TO.fsm[i];
- }
- } else {
- update_toc_entry(from);
- update_toc_entry(to + 1);
- for (i = 0; i < 3; i++) {
- play_command[i + 1] = cd->toc[from].fsm[i];
- PLAY_TO.fsm[i] = play_command[i + 4] =
- cd->toc[to + 1].fsm[i];
- }
- PLAY_TO.track = to;
- }
- for (i = 0; i < 7; i++)
- type_0_command(play_command[i], 0);
- for (i = 0; i < 2; i++)
- type_0_command(0x2, 0); /* volume */
- cd->dsb = wait_dsb();
-}
-
-static int get_current_q(struct cdrom_subchnl *qp)
-{
- int i;
- uch *q = cd->q;
- if (type_1_command(c_read_current_q, 10, q))
- return 0;
-/* q[0] = bcdbin(q[0]); Don't think so! */
- for (i = 2; i < 6; i++)
- q[i] = bcdbin(q[i]);
- qp->cdsc_adr = q[0] & 0xf;
- qp->cdsc_ctrl = q[0] >> 4; /* from mcd.c */
- qp->cdsc_trk = q[1];
- qp->cdsc_ind = q[2];
- if (qp->cdsc_format == CDROM_MSF) {
- qp->cdsc_reladdr.msf.minute = q[3];
- qp->cdsc_reladdr.msf.second = q[4];
- qp->cdsc_reladdr.msf.frame = q[5];
- qp->cdsc_absaddr.msf.minute = q[7];
- qp->cdsc_absaddr.msf.second = q[8];
- qp->cdsc_absaddr.msf.frame = q[9];
- } else {
- qp->cdsc_reladdr.lba = f_s_m2lba(q[5], q[4], q[3]);
- qp->cdsc_absaddr.lba = f_s_m2lba(q[9], q[8], q[7]);
- }
- get_drive_status();
- if (cd->dsb & dsb_play_in_progress)
- qp->cdsc_audiostatus = CDROM_AUDIO_PLAY;
- else if (PAUSED)
- qp->cdsc_audiostatus = CDROM_AUDIO_PAUSED;
- else
- qp->cdsc_audiostatus = CDROM_AUDIO_NO_STATUS;
- return 0;
-}
-
-static void invalidate_toc(void)
-{
- memset(cd->toc, 0, sizeof(cd->toc));
- memset(cd->disc_status, 0, sizeof(cd->disc_status));
-}
-
-/* cdrom.c guarantees that cdte_format == CDROM_MSF */
-static void get_toc_entry(struct cdrom_tocentry *ep)
-{
- uch track = normalize_track(ep->cdte_track);
- update_toc_entry(track);
- ep->cdte_addr.msf.frame = cd->toc[track].fsm[0];
- ep->cdte_addr.msf.second = cd->toc[track].fsm[1];
- ep->cdte_addr.msf.minute = cd->toc[track].fsm[2];
- ep->cdte_adr = cd->toc[track].q0 & 0xf;
- ep->cdte_ctrl = cd->toc[track].q0 >> 4;
- ep->cdte_datamode = 0;
-}
-
-/* Audio ioctl. Ioctl commands connected to audio are in such an
- * idiosyncratic i/o format, that we leave these untouched. Return 0
- * upon success. Memory checking has been done by cdrom_ioctl(), the
- * calling function, as well as LBA/MSF sanitization.
-*/
-static int cm206_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
- void *arg)
-{
- switch (cmd) {
- case CDROMREADTOCHDR:
- return read_toc_header((struct cdrom_tochdr *) arg);
- case CDROMREADTOCENTRY:
- get_toc_entry((struct cdrom_tocentry *) arg);
- return 0;
- case CDROMPLAYMSF:
- play_from_to_msf((struct cdrom_msf *) arg);
- return 0;
- case CDROMPLAYTRKIND: /* admittedly, not particularly beautiful */
- play_from_to_track(((struct cdrom_ti *) arg)->cdti_trk0,
- ((struct cdrom_ti *) arg)->cdti_trk1);
- return 0;
- case CDROMSTOP:
- PAUSED = 0;
- if (cd->dsb & dsb_play_in_progress)
- return type_0_command(c_stop, 1);
- else
- return 0;
- case CDROMPAUSE:
- get_drive_status();
- if (cd->dsb & dsb_play_in_progress) {
- type_0_command(c_stop, 1);
- type_1_command(c_audio_status, 5,
- cd->audio_status);
- PAUSED = 1; /* say we're paused */
- }
- return 0;
- case CDROMRESUME:
- if (PAUSED)
- play_from_to_track(0, 0);
- PAUSED = 0;
- return 0;
- case CDROMSTART:
- case CDROMVOLCTRL:
- return 0;
- case CDROMSUBCHNL:
- return get_current_q((struct cdrom_subchnl *) arg);
- default:
- return -EINVAL;
- }
-}
-
-static int cm206_media_changed(struct cdrom_device_info *cdi, int disc_nr)
-{
- if (cd != NULL) {
- int r;
- get_drive_status(); /* ensure cd->media_changed OK */
- r = cd->media_changed;
- cd->media_changed = 0; /* clear bit */
- return r;
- } else
- return -EIO;
-}
-
-/* The new generic cdrom support. Routines should be concise, most of
- the logic should be in cdrom.c */
-
-
-/* controls tray movement */
-static int cm206_tray_move(struct cdrom_device_info *cdi, int position)
-{
- if (position) { /* 1: eject */
- type_0_command(c_open_tray, 1);
- invalidate_toc();
- } else
- type_0_command(c_close_tray, 1); /* 0: close */
- return 0;
-}
-
-/* gives current state of the drive */
-static int cm206_drive_status(struct cdrom_device_info *cdi, int slot_nr)
-{
- get_drive_status();
- if (cd->dsb & dsb_tray_not_closed)
- return CDS_TRAY_OPEN;
- if (!(cd->dsb & dsb_disc_present))
- return CDS_NO_DISC;
- if (cd->dsb & dsb_drive_not_ready)
- return CDS_DRIVE_NOT_READY;
- return CDS_DISC_OK;
-}
-
-/* locks or unlocks door lock==1: lock; return 0 upon success */
-static int cm206_lock_door(struct cdrom_device_info *cdi, int lock)
-{
- uch command = (lock) ? c_lock_tray : c_unlock_tray;
- type_0_command(command, 1); /* wait and get dsb */
- /* the logic calculates the success, 0 means successful */
- return lock ^ ((cd->dsb & dsb_tray_locked) != 0);
-}
-
-/* Although a session start should be in LBA format, we return it in
- MSF format because it is slightly easier, and the new generic ioctl
- will take care of the necessary conversion. */
-static int cm206_get_last_session(struct cdrom_device_info *cdi,
- struct cdrom_multisession *mssp)
-{
- if (!FIRST_TRACK)
- get_disc_status();
- if (mssp != NULL) {
- if (DISC_STATUS & cds_multi_session) { /* multi-session */
- mssp->addr.msf.frame = cd->disc_status[3];
- mssp->addr.msf.second = cd->disc_status[4];
- mssp->addr.msf.minute = cd->disc_status[5];
- mssp->addr_format = CDROM_MSF;
- mssp->xa_flag = 1;
- } else {
- mssp->xa_flag = 0;
- }
- return 1;
- }
- return 0;
-}
-
-static int cm206_get_upc(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
-{
- uch upc[10];
- char *ret = mcn->medium_catalog_number;
- int i;
-
- if (type_1_command(c_read_upc, 10, upc))
- return -EIO;
- for (i = 0; i < 13; i++) {
- int w = i / 2 + 1, r = i % 2;
- if (r)
- ret[i] = 0x30 | (upc[w] & 0x0f);
- else
- ret[i] = 0x30 | ((upc[w] >> 4) & 0x0f);
- }
- ret[13] = '\0';
- return 0;
-}
-
-static int cm206_reset(struct cdrom_device_info *cdi)
-{
- stop_read();
- reset_cm260();
- outw(dc_normal | dc_break | READ_AHEAD, r_data_control);
- mdelay(1); /* 750 musec minimum */
- outw(dc_normal | READ_AHEAD, r_data_control);
- cd->sector_last = -1; /* flag no data buffered */
- cd->adapter_last = -1;
- invalidate_toc();
- return 0;
-}
-
-static int cm206_select_speed(struct cdrom_device_info *cdi, int speed)
-{
- int r;
- switch (speed) {
- case 0:
- r = type_0_command(c_auto_mode, 1);
- break;
- case 1:
- r = type_0_command(c_force_1x, 1);
- break;
- case 2:
- r = type_0_command(c_force_2x, 1);
- break;
- default:
- return -1;
- }
- if (r < 0)
- return r;
- else
- return 1;
-}
-
-static struct cdrom_device_ops cm206_dops = {
- .open = cm206_open,
- .release = cm206_release,
- .drive_status = cm206_drive_status,
- .media_changed = cm206_media_changed,
- .tray_move = cm206_tray_move,
- .lock_door = cm206_lock_door,
- .select_speed = cm206_select_speed,
- .get_last_session = cm206_get_last_session,
- .get_mcn = cm206_get_upc,
- .reset = cm206_reset,
- .audio_ioctl = cm206_audio_ioctl,
- .capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK |
- CDC_MULTI_SESSION | CDC_MEDIA_CHANGED |
- CDC_MCN | CDC_PLAY_AUDIO | CDC_SELECT_SPEED |
- CDC_DRIVE_STATUS,
- .n_minors = 1,
-};
-
-
-static struct cdrom_device_info cm206_info = {
- .ops = &cm206_dops,
- .speed = 2,
- .capacity = 1,
- .name = "cm206",
-};
-
-static int cm206_block_open(struct inode *inode, struct file *file)
-{
- return cdrom_open(&cm206_info, inode, file);
-}
-
-static int cm206_block_release(struct inode *inode, struct file *file)
-{
- return cdrom_release(&cm206_info, file);
-}
-
-static int cm206_block_ioctl(struct inode *inode, struct file *file,
- unsigned cmd, unsigned long arg)
-{
- switch (cmd) {
-#ifdef STATISTICS
- case CM206CTL_GET_STAT:
- if (arg >= NR_STATS)
- return -EINVAL;
- return cd->stats[arg];
- case CM206CTL_GET_LAST_STAT:
- if (arg >= NR_STATS)
- return -EINVAL;
- return cd->last_stat[arg];
-#endif
- default:
- break;
- }
-
- return cdrom_ioctl(file, &cm206_info, inode, cmd, arg);
-}
-
-static int cm206_block_media_changed(struct gendisk *disk)
-{
- return cdrom_media_changed(&cm206_info);
-}
-
-static struct block_device_operations cm206_bdops =
-{
- .owner = THIS_MODULE,
- .open = cm206_block_open,
- .release = cm206_block_release,
- .ioctl = cm206_block_ioctl,
- .media_changed = cm206_block_media_changed,
-};
-
-static struct gendisk *cm206_gendisk;
-
-/* This function probes for the adapter card. It returns the base
- address if it has found the adapter card. One can specify a base
- port to probe specifically, or 0 which means span all possible
- bases.
-
- Linus says it is too dangerous to use writes for probing, so we
- stick with pure reads for a while. Hope that 8 possible ranges,
- request_region, 15 bits of one port and 6 of another make things
- likely enough to accept the region on the first hit...
- */
-static int __init probe_base_port(int base)
-{
- int b = 0x300, e = 0x370; /* this is the range of start addresses */
- volatile int fool, i;
-
- if (base)
- b = e = base;
- for (base = b; base <= e; base += 0x10) {
- if (!request_region(base, 0x10,"cm206"))
- continue;
- for (i = 0; i < 3; i++)
- fool = inw(base + 2); /* empty possibly uart_receive_buffer */
- if ((inw(base + 6) & 0xffef) != 0x0001 || /* line_status */
- (inw(base) & 0xad00) != 0) { /* data status */
- release_region(base,0x10);
- continue;
- }
- return (base);
- }
- return 0;
-}
-
-#if !defined(MODULE) || defined(AUTO_PROBE_MODULE)
-/* Probe for irq# nr. If nr==0, probe for all possible irq's. */
-static int __init probe_irq(int nr)
-{
- int irqs, irq;
- outw(dc_normal | READ_AHEAD, r_data_control); /* disable irq-generation */
- sti();
- irqs = probe_irq_on();
- reset_cm260(); /* causes interrupt */
- udelay(100); /* wait for it */
- irq = probe_irq_off(irqs);
- outw(dc_normal | READ_AHEAD, r_data_control); /* services interrupt */
- if (nr && irq != nr && irq > 0)
- return 0; /* wrong interrupt happened */
- else
- return irq;
-}
-#endif
-
-int __init cm206_init(void)
-{
- uch e = 0;
- long int size = sizeof(struct cm206_struct);
- struct gendisk *disk;
-
- printk(KERN_INFO "cm206 cdrom driver " REVISION);
- cm206_base = probe_base_port(auto_probe ? 0 : cm206_base);
- if (!cm206_base) {
- printk(" can't find adapter!\n");
- return -EIO;
- }
- printk(" adapter at 0x%x", cm206_base);
- cd = kmalloc(size, GFP_KERNEL);
- if (!cd)
- goto out_base;
- /* Now we have found the adaptor card, try to reset it. As we have
- * found out earlier, this process generates an interrupt as well,
- * so we might just exploit that fact for irq probing! */
-#if !defined(MODULE) || defined(AUTO_PROBE_MODULE)
- cm206_irq = probe_irq(auto_probe ? 0 : cm206_irq);
- if (cm206_irq <= 0) {
- printk("can't find IRQ!\n");
- goto out_probe;
- } else
- printk(" IRQ %d found\n", cm206_irq);
-#else
- cli();
- reset_cm260();
- /* Now, the problem here is that reset_cm260 can generate an
- interrupt. It seems that this can cause a kernel oops some time
- later. So we wait a while and `service' this interrupt. */
- mdelay(1);
- outw(dc_normal | READ_AHEAD, r_data_control);
- sti();
- printk(" using IRQ %d\n", cm206_irq);
-#endif
- if (send_receive_polled(c_drive_configuration) !=
- c_drive_configuration) {
- printk(KERN_INFO " drive not there\n");
- goto out_probe;
- }
- e = send_receive_polled(c_gimme);
- printk(KERN_INFO "Firmware revision %d", e & dcf_revision_code);
- if (e & dcf_transfer_rate)
- printk(" double");
- else
- printk(" single");
- printk(" speed drive");
- if (e & dcf_motorized_tray)
- printk(", motorized tray");
- if (request_irq(cm206_irq, cm206_interrupt, 0, "cm206", NULL)) {
- printk("\nUnable to reserve IRQ---aborted\n");
- goto out_probe;
- }
- printk(".\n");
-
- if (register_blkdev(MAJOR_NR, "cm206"))
- goto out_blkdev;
-
- disk = alloc_disk(1);
- if (!disk)
- goto out_disk;
- disk->major = MAJOR_NR;
- disk->first_minor = 0;
- sprintf(disk->disk_name, "cm206cd");
- disk->fops = &cm206_bdops;
- disk->flags = GENHD_FL_CD;
- cm206_gendisk = disk;
- if (register_cdrom(&cm206_info) != 0) {
- printk(KERN_INFO "Cannot register for cdrom %d!\n", MAJOR_NR);
- goto out_cdrom;
- }
- cm206_queue = blk_init_queue(do_cm206_request, &cm206_lock);
- if (!cm206_queue)
- goto out_queue;
-
- blk_queue_hardsect_size(cm206_queue, 2048);
- disk->queue = cm206_queue;
- add_disk(disk);
-
- memset(cd, 0, sizeof(*cd)); /* give'm some reasonable value */
- cd->sector_last = -1; /* flag no data buffered */
- cd->adapter_last = -1;
- init_timer(&cd->timer);
- cd->timer.function = cm206_timeout;
- cd->max_sectors = (inw(r_data_status) & ds_ram_size) ? 24 : 97;
- printk(KERN_INFO "%d kB adapter memory available, "
- " %ld bytes kernel memory used.\n", cd->max_sectors * 2,
- size);
- return 0;
-
-out_queue:
- unregister_cdrom(&cm206_info);
-out_cdrom:
- put_disk(disk);
-out_disk:
- unregister_blkdev(MAJOR_NR, "cm206");
-out_blkdev:
- free_irq(cm206_irq, NULL);
-out_probe:
- kfree(cd);
-out_base:
- release_region(cm206_base, 16);
- return -EIO;
-}
-
-#ifdef MODULE
-
-
-static void __init parse_options(void)
-{
- int i;
- for (i = 0; i < 2; i++) {
- if (0x300 <= cm206[i] && i <= 0x370
- && cm206[i] % 0x10 == 0) {
- cm206_base = cm206[i];
- auto_probe = 0;
- } else if (3 <= cm206[i] && cm206[i] <= 15) {
- cm206_irq = cm206[i];
- auto_probe = 0;
- }
- }
-}
-
-static int __init __cm206_init(void)
-{
- parse_options();
-#if !defined(AUTO_PROBE_MODULE)
- auto_probe = 0;
-#endif
- return cm206_init();
-}
-
-static void __exit cm206_exit(void)
-{
- del_gendisk(cm206_gendisk);
- put_disk(cm206_gendisk);
- if (unregister_cdrom(&cm206_info)) {
- printk("Can't unregister cdrom cm206\n");
- return;
- }
- if (unregister_blkdev(MAJOR_NR, "cm206")) {
- printk("Can't unregister major cm206\n");
- return;
- }
- blk_cleanup_queue(cm206_queue);
- free_irq(cm206_irq, NULL);
- kfree(cd);
- release_region(cm206_base, 16);
- printk(KERN_INFO "cm206 removed\n");
-}
-
-module_init(__cm206_init);
-module_exit(cm206_exit);
-
-#else /* !MODULE */
-
-/* This setup function accepts either `auto' or numbers in the range
- * 3--11 (for irq) or 0x300--0x370 (for base port) or both. */
-
-static int __init cm206_setup(char *s)
-{
- int i, p[4];
-
- (void) get_options(s, ARRAY_SIZE(p), p);
-
- if (!strcmp(s, "auto"))
- auto_probe = 1;
- for (i = 1; i <= p[0]; i++) {
- if (0x300 <= p[i] && i <= 0x370 && p[i] % 0x10 == 0) {
- cm206_base = p[i];
- auto_probe = 0;
- } else if (3 <= p[i] && p[i] <= 15) {
- cm206_irq = p[i];
- auto_probe = 0;
- }
- }
- return 1;
-}
-
-__setup("cm206=", cm206_setup);
-
-#endif /* !MODULE */
-MODULE_ALIAS_BLOCKDEV_MAJOR(CM206_CDROM_MAJOR);
-
diff --git a/drivers/cdrom/cm206.h b/drivers/cdrom/cm206.h
deleted file mode 100644
index 0ae51c1a0dac..000000000000
--- a/drivers/cdrom/cm206.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/* cm206.h Header file for cm206.c.
- Copyright (c) 1995 David van Leeuwen
-*/
-
-#ifndef LINUX_CM206_H
-#define LINUX_CM206_H
-
-#include <linux/ioctl.h>
-
-/* First, the cm260 stuff */
-/* The ports and irq used. Although CM206_BASE and CM206_IRQ are defined
- below, the values are not used unless autoprobing is turned off and
- no LILO boot options or module command line options are given. Change
- these values to your own as last resort if autoprobing and options
- don't work. */
-
-#define CM206_BASE 0x340
-#define CM206_IRQ 11
-
-#define r_data_status (cm206_base)
-#define r_uart_receive (cm206_base+0x2)
-#define r_fifo_output_buffer (cm206_base+0x4)
-#define r_line_status (cm206_base+0x6)
-#define r_data_control (cm206_base+0x8)
-#define r_uart_transmit (cm206_base+0xa)
-#define r_test_clock (cm206_base+0xc)
-#define r_test_control (cm206_base+0xe)
-
-/* the data_status flags */
-#define ds_ram_size 0x4000
-#define ds_toc_ready 0x2000
-#define ds_fifo_empty 0x1000
-#define ds_sync_error 0x800
-#define ds_crc_error 0x400
-#define ds_data_error 0x200
-#define ds_fifo_overflow 0x100
-#define ds_data_ready 0x80
-
-/* the line_status flags */
-#define ls_attention 0x10
-#define ls_parity_error 0x8
-#define ls_overrun 0x4
-#define ls_receive_buffer_full 0x2
-#define ls_transmitter_buffer_empty 0x1
-
-/* the data control register flags */
-#define dc_read_q_channel 0x4000
-#define dc_mask_sync_error 0x2000
-#define dc_toc_enable 0x1000
-#define dc_no_stop_on_error 0x800
-#define dc_break 0x400
-#define dc_initialize 0x200
-#define dc_mask_transmit_ready 0x100
-#define dc_flag_enable 0x80
-
-/* Define the default data control register flags here */
-#define dc_normal (dc_mask_sync_error | dc_no_stop_on_error | \
- dc_mask_transmit_ready)
-
-/* now some constants related to the cm206 */
-/* another drive status byte, echoed by the cm206 on most commands */
-
-#define dsb_error_condition 0x1
-#define dsb_play_in_progress 0x4
-#define dsb_possible_media_change 0x8
-#define dsb_disc_present 0x10
-#define dsb_drive_not_ready 0x20
-#define dsb_tray_locked 0x40
-#define dsb_tray_not_closed 0x80
-
-#define dsb_not_useful (dsb_drive_not_ready | dsb_tray_not_closed)
-
-/* the cm206 command set */
-
-#define c_close_tray 0
-#define c_lock_tray 0x01
-#define c_unlock_tray 0x04
-#define c_open_tray 0x05
-#define c_seek 0x10
-#define c_read_data 0x20
-#define c_force_1x 0x21
-#define c_force_2x 0x22
-#define c_auto_mode 0x23
-#define c_play 0x30
-#define c_set_audio_mode 0x31
-#define c_read_current_q 0x41
-#define c_stream_q 0x42
-#define c_drive_status 0x50
-#define c_disc_status 0x51
-#define c_audio_status 0x52
-#define c_drive_configuration 0x53
-#define c_read_upc 0x60
-#define c_stop 0x70
-#define c_calc_checksum 0xe5
-
-#define c_gimme 0xf8
-
-/* finally, the (error) condition that the drive can be in *
- * OK, this is not always an error, but let's prefix it with e_ */
-
-#define e_none 0
-#define e_illegal_command 0x01
-#define e_sync 0x02
-#define e_seek 0x03
-#define e_parity 0x04
-#define e_focus 0x05
-#define e_header_sync 0x06
-#define e_code_incompatibility 0x07
-#define e_reset_done 0x08
-#define e_bad_parameter 0x09
-#define e_radial 0x0a
-#define e_sub_code 0x0b
-#define e_no_data_track 0x0c
-#define e_scan 0x0d
-#define e_tray_open 0x0f
-#define e_no_disc 0x10
-#define e_tray stalled 0x11
-
-/* drive configuration masks */
-
-#define dcf_revision_code 0x7
-#define dcf_transfer_rate 0x60
-#define dcf_motorized_tray 0x80
-
-/* disc status byte */
-
-#define cds_multi_session 0x2
-#define cds_all_audio 0x8
-#define cds_xa_mode 0xf0
-
-/* finally some ioctls for the driver */
-
-#define CM206CTL_GET_STAT _IO( 0x20, 0 )
-#define CM206CTL_GET_LAST_STAT _IO( 0x20, 1 )
-
-#ifdef STATISTICS
-
-/* This is an ugly way to guarantee that the names of the statistics
- * are the same in the code and in the diagnostics program. */
-
-#ifdef __KERNEL__
-#define x(a) st_ ## a
-#define y enum
-#else
-#define x(a) #a
-#define y char * stats_name[] =
-#endif
-
-y {x(interrupt), x(data_ready), x(fifo_overflow), x(data_error),
- x(crc_error), x(sync_error), x(lost_intr), x(echo),
- x(write_timeout), x(receive_timeout), x(read_timeout),
- x(dsb_timeout), x(stop_0xff), x(back_read_timeout),
- x(sector_transferred), x(read_restarted), x(read_background),
- x(bh), x(open), x(ioctl_multisession), x(attention)
-#ifdef __KERNEL__
- , x(last_entry)
-#endif
- };
-
-#ifdef __KERNEL__
-#define NR_STATS st_last_entry
-#else
-#define NR_STATS (sizeof(stats_name)/sizeof(char*))
-#endif
-
-#undef y
-#undef x
-
-#endif /* STATISTICS */
-
-#endif /* LINUX_CM206_H */
diff --git a/drivers/cdrom/gscd.c b/drivers/cdrom/gscd.c
deleted file mode 100644
index 176742ed007b..000000000000
--- a/drivers/cdrom/gscd.c
+++ /dev/null
@@ -1,1029 +0,0 @@
-#define GSCD_VERSION "0.4a Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>"
-
-/*
- linux/drivers/block/gscd.c - GoldStar R420 CDROM driver
-
- Copyright (C) 1995 Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>
- based upon pre-works by Eberhard Moenkeberg <emoenke@gwdg.de>
-
-
- For all kind of other information about the GoldStar CDROM
- and this Linux device driver I installed a WWW-URL:
- http://linux.rz.fh-hannover.de/~raupach
-
-
- If you are the editor of a Linux CD, you should
- enable gscd.c within your boot floppy kernel and
- send me one of your CDs for free.
-
-
- --------------------------------------------------------------------
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- --------------------------------------------------------------------
-
- 9 November 1999 -- Make kernel-parameter implementation work with 2.3.x
- Removed init_module & cleanup_module in favor of
- module_init & module_exit.
- Torben Mathiasen <tmm@image.dk>
-
-*/
-
-/* These settings are for various debug-level. Leave they untouched ... */
-#define NO_GSCD_DEBUG
-#define NO_IOCTL_DEBUG
-#define NO_MODULE_DEBUG
-#define NO_FUTURE_WORK
-/*------------------------*/
-
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#define MAJOR_NR GOLDSTAR_CDROM_MAJOR
-#include <linux/blkdev.h>
-#include "gscd.h"
-
-static int gscdPresent = 0;
-
-static unsigned char gscd_buf[2048]; /* buffer for block size conversion */
-static int gscd_bn = -1;
-static short gscd_port = GSCD_BASE_ADDR;
-module_param_named(gscd, gscd_port, short, 0);
-
-/* Kommt spaeter vielleicht noch mal dran ...
- * static DECLARE_WAIT_QUEUE_HEAD(gscd_waitq);
- */
-
-static void gscd_read_cmd(struct request *req);
-static void gscd_hsg2msf(long hsg, struct msf *msf);
-static void gscd_bin2bcd(unsigned char *p);
-
-/* Schnittstellen zum Kern/FS */
-
-static void __do_gscd_request(unsigned long dummy);
-static int gscd_ioctl(struct inode *, struct file *, unsigned int,
- unsigned long);
-static int gscd_open(struct inode *, struct file *);
-static int gscd_release(struct inode *, struct file *);
-static int check_gscd_med_chg(struct gendisk *disk);
-
-/* GoldStar Funktionen */
-
-static void cmd_out(int, char *, char *, int);
-static void cmd_status(void);
-static void init_cd_drive(int);
-
-static int get_status(void);
-static void clear_Audio(void);
-static void cc_invalidate(void);
-
-/* some things for the next version */
-#ifdef FUTURE_WORK
-static void update_state(void);
-static long gscd_msf2hsg(struct msf *mp);
-static int gscd_bcd2bin(unsigned char bcd);
-#endif
-
-
-/* lo-level cmd-Funktionen */
-
-static void cmd_info_in(char *, int);
-static void cmd_end(void);
-static void cmd_read_b(char *, int, int);
-static void cmd_read_w(char *, int, int);
-static int cmd_unit_alive(void);
-static void cmd_write_cmd(char *);
-
-
-/* GoldStar Variablen */
-
-static int curr_drv_state;
-static int drv_states[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
-static int drv_mode;
-static int disk_state;
-static int speed;
-static int ndrives;
-
-static unsigned char drv_num_read;
-static unsigned char f_dsk_valid;
-static unsigned char current_drive;
-static unsigned char f_drv_ok;
-
-
-static char f_AudioPlay;
-static char f_AudioPause;
-static int AudioStart_m;
-static int AudioStart_f;
-static int AudioEnd_m;
-static int AudioEnd_f;
-
-static DEFINE_TIMER(gscd_timer, NULL, 0, 0);
-static DEFINE_SPINLOCK(gscd_lock);
-static struct request_queue *gscd_queue;
-
-static struct block_device_operations gscd_fops = {
- .owner = THIS_MODULE,
- .open = gscd_open,
- .release = gscd_release,
- .ioctl = gscd_ioctl,
- .media_changed = check_gscd_med_chg,
-};
-
-/*
- * Checking if the media has been changed
- * (not yet implemented)
- */
-static int check_gscd_med_chg(struct gendisk *disk)
-{
-#ifdef GSCD_DEBUG
- printk("gscd: check_med_change\n");
-#endif
- return 0;
-}
-
-
-#ifndef MODULE
-/* Using new interface for kernel-parameters */
-
-static int __init gscd_setup(char *str)
-{
- int ints[2];
- (void) get_options(str, ARRAY_SIZE(ints), ints);
-
- if (ints[0] > 0) {
- gscd_port = ints[1];
- }
- return 1;
-}
-
-__setup("gscd=", gscd_setup);
-
-#endif
-
-static int gscd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
- unsigned long arg)
-{
- unsigned char to_do[10];
- unsigned char dummy;
-
-
- switch (cmd) {
- case CDROMSTART: /* Spin up the drive */
- /* Don't think we can do this. Even if we could,
- * I think the drive times out and stops after a while
- * anyway. For now, ignore it.
- */
- return 0;
-
- case CDROMRESUME: /* keine Ahnung was das ist */
- return 0;
-
-
- case CDROMEJECT:
- cmd_status();
- to_do[0] = CMD_TRAY_CTL;
- cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
-
- return 0;
-
- default:
- return -EINVAL;
- }
-
-}
-
-
-/*
- * Take care of the different block sizes between cdrom and Linux.
- * When Linux gets variable block sizes this will probably go away.
- */
-
-static void gscd_transfer(struct request *req)
-{
- while (req->nr_sectors > 0 && gscd_bn == req->sector / 4) {
- long offs = (req->sector & 3) * 512;
- memcpy(req->buffer, gscd_buf + offs, 512);
- req->nr_sectors--;
- req->sector++;
- req->buffer += 512;
- }
-}
-
-
-/*
- * I/O request routine called from Linux kernel.
- */
-
-static void do_gscd_request(request_queue_t * q)
-{
- __do_gscd_request(0);
-}
-
-static void __do_gscd_request(unsigned long dummy)
-{
- struct request *req;
- unsigned int block;
- unsigned int nsect;
-
-repeat:
- req = elv_next_request(gscd_queue);
- if (!req)
- return;
-
- block = req->sector;
- nsect = req->nr_sectors;
-
- if (req->sector == -1)
- goto out;
-
- if (rq_data_dir(req) != READ) {
- printk("GSCD: bad cmd %u\n", rq_data_dir(req));
- end_request(req, 0);
- goto repeat;
- }
-
- gscd_transfer(req);
-
- /* if we satisfied the request from the buffer, we're done. */
-
- if (req->nr_sectors == 0) {
- end_request(req, 1);
- goto repeat;
- }
-#ifdef GSCD_DEBUG
- printk("GSCD: block %d, nsect %d\n", block, nsect);
-#endif
- gscd_read_cmd(req);
-out:
- return;
-}
-
-
-
-/*
- * Check the result of the set-mode command. On success, send the
- * read-data command.
- */
-
-static void gscd_read_cmd(struct request *req)
-{
- long block;
- struct gscd_Play_msf gscdcmd;
- char cmd[] = { CMD_READ, 0x80, 0, 0, 0, 0, 1 }; /* cmd mode M-S-F secth sectl */
-
- cmd_status();
- if (disk_state & (ST_NO_DISK | ST_DOOR_OPEN)) {
- printk("GSCD: no disk or door open\n");
- end_request(req, 0);
- } else {
- if (disk_state & ST_INVALID) {
- printk("GSCD: disk invalid\n");
- end_request(req, 0);
- } else {
- gscd_bn = -1; /* purge our buffer */
- block = req->sector / 4;
- gscd_hsg2msf(block, &gscdcmd.start); /* cvt to msf format */
-
- cmd[2] = gscdcmd.start.min;
- cmd[3] = gscdcmd.start.sec;
- cmd[4] = gscdcmd.start.frame;
-
-#ifdef GSCD_DEBUG
- printk("GSCD: read msf %d:%d:%d\n", cmd[2], cmd[3],
- cmd[4]);
-#endif
- cmd_out(TYPE_DATA, (char *) &cmd,
- (char *) &gscd_buf[0], 1);
-
- gscd_bn = req->sector / 4;
- gscd_transfer(req);
- end_request(req, 1);
- }
- }
- SET_TIMER(__do_gscd_request, 1);
-}
-
-
-/*
- * Open the device special file. Check that a disk is in.
- */
-
-static int gscd_open(struct inode *ip, struct file *fp)
-{
- int st;
-
-#ifdef GSCD_DEBUG
- printk("GSCD: open\n");
-#endif
-
- if (gscdPresent == 0)
- return -ENXIO; /* no hardware */
-
- get_status();
- st = disk_state & (ST_NO_DISK | ST_DOOR_OPEN);
- if (st) {
- printk("GSCD: no disk or door open\n");
- return -ENXIO;
- }
-
-/* if (updateToc() < 0)
- return -EIO;
-*/
-
- return 0;
-}
-
-
-/*
- * On close, we flush all gscd blocks from the buffer cache.
- */
-
-static int gscd_release(struct inode *inode, struct file *file)
-{
-
-#ifdef GSCD_DEBUG
- printk("GSCD: release\n");
-#endif
-
- gscd_bn = -1;
-
- return 0;
-}
-
-
-static int get_status(void)
-{
- int status;
-
- cmd_status();
- status = disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01);
-
- if (status == (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) {
- cc_invalidate();
- return 1;
- } else {
- return 0;
- }
-}
-
-
-static void cc_invalidate(void)
-{
- drv_num_read = 0xFF;
- f_dsk_valid = 0xFF;
- current_drive = 0xFF;
- f_drv_ok = 0xFF;
-
- clear_Audio();
-
-}
-
-static void clear_Audio(void)
-{
-
- f_AudioPlay = 0;
- f_AudioPause = 0;
- AudioStart_m = 0;
- AudioStart_f = 0;
- AudioEnd_m = 0;
- AudioEnd_f = 0;
-
-}
-
-/*
- * waiting ?
- */
-
-static int wait_drv_ready(void)
-{
- int found, read;
-
- do {
- found = inb(GSCDPORT(0));
- found &= 0x0f;
- read = inb(GSCDPORT(0));
- read &= 0x0f;
- } while (read != found);
-
-#ifdef GSCD_DEBUG
- printk("Wait for: %d\n", read);
-#endif
-
- return read;
-}
-
-static void cc_Ident(char *respons)
-{
- char to_do[] = { CMD_IDENT, 0, 0 };
-
- cmd_out(TYPE_INFO, (char *) &to_do, (char *) respons, (int) 0x1E);
-
-}
-
-static void cc_SetSpeed(void)
-{
- char to_do[] = { CMD_SETSPEED, 0, 0 };
- char dummy;
-
- if (speed > 0) {
- to_do[1] = speed & 0x0F;
- cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
- }
-}
-
-static void cc_Reset(void)
-{
- char to_do[] = { CMD_RESET, 0 };
- char dummy;
-
- cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
-}
-
-static void cmd_status(void)
-{
- char to_do[] = { CMD_STATUS, 0 };
- char dummy;
-
- cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
-
-#ifdef GSCD_DEBUG
- printk("GSCD: Status: %d\n", disk_state);
-#endif
-
-}
-
-static void cmd_out(int cmd_type, char *cmd, char *respo_buf, int respo_count)
-{
- int result;
-
-
- result = wait_drv_ready();
- if (result != drv_mode) {
- unsigned long test_loops = 0xFFFF;
- int i, dummy;
-
- outb(curr_drv_state, GSCDPORT(0));
-
- /* LOCLOOP_170 */
- do {
- result = wait_drv_ready();
- test_loops--;
- } while ((result != drv_mode) && (test_loops > 0));
-
- if (result != drv_mode) {
- disk_state = ST_x08 | ST_x04 | ST_INVALID;
- return;
- }
-
- /* ...and waiting */
- for (i = 1, dummy = 1; i < 0xFFFF; i++) {
- dummy *= i;
- }
- }
-
- /* LOC_172 */
- /* check the unit */
- /* and wake it up */
- if (cmd_unit_alive() != 0x08) {
- /* LOC_174 */
- /* game over for this unit */
- disk_state = ST_x08 | ST_x04 | ST_INVALID;
- return;
- }
-
- /* LOC_176 */
-#ifdef GSCD_DEBUG
- printk("LOC_176 ");
-#endif
- if (drv_mode == 0x09) {
- /* magic... */
- printk("GSCD: magic ...\n");
- outb(result, GSCDPORT(2));
- }
-
- /* write the command to the drive */
- cmd_write_cmd(cmd);
-
- /* LOC_178 */
- for (;;) {
- result = wait_drv_ready();
- if (result != drv_mode) {
- /* LOC_179 */
- if (result == 0x04) { /* Mode 4 */
- /* LOC_205 */
-#ifdef GSCD_DEBUG
- printk("LOC_205 ");
-#endif
- disk_state = inb(GSCDPORT(2));
-
- do {
- result = wait_drv_ready();
- } while (result != drv_mode);
- return;
-
- } else {
- if (result == 0x06) { /* Mode 6 */
- /* LOC_181 */
-#ifdef GSCD_DEBUG
- printk("LOC_181 ");
-#endif
-
- if (cmd_type == TYPE_DATA) {
- /* read data */
- /* LOC_184 */
- if (drv_mode == 9) {
- /* read the data to the buffer (word) */
-
- /* (*(cmd+1))?(CD_FRAMESIZE/2):(CD_FRAMESIZE_RAW/2) */
- cmd_read_w
- (respo_buf,
- respo_count,
- CD_FRAMESIZE /
- 2);
- return;
- } else {
- /* read the data to the buffer (byte) */
-
- /* (*(cmd+1))?(CD_FRAMESIZE):(CD_FRAMESIZE_RAW) */
- cmd_read_b
- (respo_buf,
- respo_count,
- CD_FRAMESIZE);
- return;
- }
- } else {
- /* read the info to the buffer */
- cmd_info_in(respo_buf,
- respo_count);
- return;
- }
-
- return;
- }
- }
-
- } else {
- disk_state = ST_x08 | ST_x04 | ST_INVALID;
- return;
- }
- } /* for (;;) */
-
-
-#ifdef GSCD_DEBUG
- printk("\n");
-#endif
-}
-
-
-static void cmd_write_cmd(char *pstr)
-{
- int i, j;
-
- /* LOC_177 */
-#ifdef GSCD_DEBUG
- printk("LOC_177 ");
-#endif
-
- /* calculate the number of parameter */
- j = *pstr & 0x0F;
-
- /* shift it out */
- for (i = 0; i < j; i++) {
- outb(*pstr, GSCDPORT(2));
- pstr++;
- }
-}
-
-
-static int cmd_unit_alive(void)
-{
- int result;
- unsigned long max_test_loops;
-
-
- /* LOC_172 */
-#ifdef GSCD_DEBUG
- printk("LOC_172 ");
-#endif
-
- outb(curr_drv_state, GSCDPORT(0));
- max_test_loops = 0xFFFF;
-
- do {
- result = wait_drv_ready();
- max_test_loops--;
- } while ((result != 0x08) && (max_test_loops > 0));
-
- return result;
-}
-
-
-static void cmd_info_in(char *pb, int count)
-{
- int result;
- char read;
-
-
- /* read info */
- /* LOC_182 */
-#ifdef GSCD_DEBUG
- printk("LOC_182 ");
-#endif
-
- do {
- read = inb(GSCDPORT(2));
- if (count > 0) {
- *pb = read;
- pb++;
- count--;
- }
-
- /* LOC_183 */
- do {
- result = wait_drv_ready();
- } while (result == 0x0E);
- } while (result == 6);
-
- cmd_end();
- return;
-}
-
-
-static void cmd_read_b(char *pb, int count, int size)
-{
- int result;
- int i;
-
-
- /* LOC_188 */
- /* LOC_189 */
-#ifdef GSCD_DEBUG
- printk("LOC_189 ");
-#endif
-
- do {
- do {
- result = wait_drv_ready();
- } while (result != 6 || result == 0x0E);
-
- if (result != 6) {
- cmd_end();
- return;
- }
-#ifdef GSCD_DEBUG
- printk("LOC_191 ");
-#endif
-
- for (i = 0; i < size; i++) {
- *pb = inb(GSCDPORT(2));
- pb++;
- }
- count--;
- } while (count > 0);
-
- cmd_end();
- return;
-}
-
-
-static void cmd_end(void)
-{
- int result;
-
-
- /* LOC_204 */
-#ifdef GSCD_DEBUG
- printk("LOC_204 ");
-#endif
-
- do {
- result = wait_drv_ready();
- if (result == drv_mode) {
- return;
- }
- } while (result != 4);
-
- /* LOC_205 */
-#ifdef GSCD_DEBUG
- printk("LOC_205 ");
-#endif
-
- disk_state = inb(GSCDPORT(2));
-
- do {
- result = wait_drv_ready();
- } while (result != drv_mode);
- return;
-
-}
-
-
-static void cmd_read_w(char *pb, int count, int size)
-{
- int result;
- int i;
-
-
-#ifdef GSCD_DEBUG
- printk("LOC_185 ");
-#endif
-
- do {
- /* LOC_185 */
- do {
- result = wait_drv_ready();
- } while (result != 6 || result == 0x0E);
-
- if (result != 6) {
- cmd_end();
- return;
- }
-
- for (i = 0; i < size; i++) {
- /* na, hier muss ich noch mal drueber nachdenken */
- *pb = inw(GSCDPORT(2));
- pb++;
- }
- count--;
- } while (count > 0);
-
- cmd_end();
- return;
-}
-
-static int __init find_drives(void)
-{
- int *pdrv;
- int drvnum;
- int subdrv;
- int i;
-
- speed = 0;
- pdrv = (int *) &drv_states;
- curr_drv_state = 0xFE;
- subdrv = 0;
- drvnum = 0;
-
- for (i = 0; i < 8; i++) {
- subdrv++;
- cmd_status();
- disk_state &= ST_x08 | ST_x04 | ST_INVALID | ST_x01;
- if (disk_state != (ST_x08 | ST_x04 | ST_INVALID)) {
- /* LOC_240 */
- *pdrv = curr_drv_state;
- init_cd_drive(drvnum);
- pdrv++;
- drvnum++;
- } else {
- if (subdrv < 2) {
- continue;
- } else {
- subdrv = 0;
- }
- }
-
-/* curr_drv_state<<1; <-- das geht irgendwie nicht */
-/* muss heissen: curr_drv_state <<= 1; (ist ja Wert-Zuweisung) */
- curr_drv_state *= 2;
- curr_drv_state |= 1;
-#ifdef GSCD_DEBUG
- printk("DriveState: %d\n", curr_drv_state);
-#endif
- }
-
- ndrives = drvnum;
- return drvnum;
-}
-
-static void __init init_cd_drive(int num)
-{
- char resp[50];
- int i;
-
- printk("GSCD: init unit %d\n", num);
- cc_Ident((char *) &resp);
-
- printk("GSCD: identification: ");
- for (i = 0; i < 0x1E; i++) {
- printk("%c", resp[i]);
- }
- printk("\n");
-
- cc_SetSpeed();
-
-}
-
-#ifdef FUTURE_WORK
-/* return_done */
-static void update_state(void)
-{
- unsigned int AX;
-
-
- if ((disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) == 0) {
- if (disk_state == (ST_x08 | ST_x04 | ST_INVALID)) {
- AX = ST_INVALID;
- }
-
- if ((disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01))
- == 0) {
- invalidate();
- f_drv_ok = 0;
- }
-
- AX |= 0x8000;
- }
-
- if (disk_state & ST_PLAYING) {
- AX |= 0x200;
- }
-
- AX |= 0x100;
- /* pkt_esbx = AX; */
-
- disk_state = 0;
-
-}
-#endif
-
-static struct gendisk *gscd_disk;
-
-static void __exit gscd_exit(void)
-{
- CLEAR_TIMER;
-
- del_gendisk(gscd_disk);
- put_disk(gscd_disk);
- if ((unregister_blkdev(MAJOR_NR, "gscd") == -EINVAL)) {
- printk("What's that: can't unregister GoldStar-module\n");
- return;
- }
- blk_cleanup_queue(gscd_queue);
- release_region(gscd_port, GSCD_IO_EXTENT);
- printk(KERN_INFO "GoldStar-module released.\n");
-}
-
-/* This is the common initialisation for the GoldStar drive. */
-/* It is called at boot time AND for module init. */
-static int __init gscd_init(void)
-{
- int i;
- int result;
- int ret=0;
-
- printk(KERN_INFO "GSCD: version %s\n", GSCD_VERSION);
- printk(KERN_INFO
- "GSCD: Trying to detect a Goldstar R420 CD-ROM drive at 0x%X.\n",
- gscd_port);
-
- if (!request_region(gscd_port, GSCD_IO_EXTENT, "gscd")) {
- printk(KERN_WARNING "GSCD: Init failed, I/O port (%X) already"
- " in use.\n", gscd_port);
- return -EIO;
- }
-
-
- /* check for card */
- result = wait_drv_ready();
- if (result == 0x09) {
- printk(KERN_WARNING "GSCD: DMA kann ich noch nicht!\n");
- ret = -EIO;
- goto err_out1;
- }
-
- if (result == 0x0b) {
- drv_mode = result;
- i = find_drives();
- if (i == 0) {
- printk(KERN_WARNING "GSCD: GoldStar CD-ROM Drive is"
- " not found.\n");
- ret = -EIO;
- goto err_out1;
- }
- }
-
- if ((result != 0x0b) && (result != 0x09)) {
- printk(KERN_WARNING "GSCD: GoldStar Interface Adapter does not "
- "exist or H/W error\n");
- ret = -EIO;
- goto err_out1;
- }
-
- /* reset all drives */
- i = 0;
- while (drv_states[i] != 0) {
- curr_drv_state = drv_states[i];
- printk(KERN_INFO "GSCD: Reset unit %d ... ", i);
- cc_Reset();
- printk("done\n");
- i++;
- }
-
- gscd_disk = alloc_disk(1);
- if (!gscd_disk)
- goto err_out1;
- gscd_disk->major = MAJOR_NR;
- gscd_disk->first_minor = 0;
- gscd_disk->fops = &gscd_fops;
- sprintf(gscd_disk->disk_name, "gscd");
-
- if (register_blkdev(MAJOR_NR, "gscd")) {
- ret = -EIO;
- goto err_out2;
- }
-
- gscd_queue = blk_init_queue(do_gscd_request, &gscd_lock);
- if (!gscd_queue) {
- ret = -ENOMEM;
- goto err_out3;
- }
-
- disk_state = 0;
- gscdPresent = 1;
-
- gscd_disk->queue = gscd_queue;
- add_disk(gscd_disk);
-
- printk(KERN_INFO "GSCD: GoldStar CD-ROM Drive found.\n");
- return 0;
-
-err_out3:
- unregister_blkdev(MAJOR_NR, "gscd");
-err_out2:
- put_disk(gscd_disk);
-err_out1:
- release_region(gscd_port, GSCD_IO_EXTENT);
- return ret;
-}
-
-static void gscd_hsg2msf(long hsg, struct msf *msf)
-{
- hsg += CD_MSF_OFFSET;
- msf->min = hsg / (CD_FRAMES * CD_SECS);
- hsg %= CD_FRAMES * CD_SECS;
- msf->sec = hsg / CD_FRAMES;
- msf->frame = hsg % CD_FRAMES;
-
- gscd_bin2bcd(&msf->min); /* convert to BCD */
- gscd_bin2bcd(&msf->sec);
- gscd_bin2bcd(&msf->frame);
-}
-
-
-static void gscd_bin2bcd(unsigned char *p)
-{
- int u, t;
-
- u = *p % 10;
- t = *p / 10;
- *p = u | (t << 4);
-}
-
-
-#ifdef FUTURE_WORK
-static long gscd_msf2hsg(struct msf *mp)
-{
- return gscd_bcd2bin(mp->frame)
- + gscd_bcd2bin(mp->sec) * CD_FRAMES
- + gscd_bcd2bin(mp->min) * CD_FRAMES * CD_SECS - CD_MSF_OFFSET;
-}
-
-static int gscd_bcd2bin(unsigned char bcd)
-{
- return (bcd >> 4) * 10 + (bcd & 0xF);
-}
-#endif
-
-MODULE_AUTHOR("Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>");
-MODULE_LICENSE("GPL");
-module_init(gscd_init);
-module_exit(gscd_exit);
-MODULE_ALIAS_BLOCKDEV_MAJOR(GOLDSTAR_CDROM_MAJOR);
diff --git a/drivers/cdrom/gscd.h b/drivers/cdrom/gscd.h
deleted file mode 100644
index a41e64bfc061..000000000000
--- a/drivers/cdrom/gscd.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Definitions for a GoldStar R420 CD-ROM interface
- *
- * Copyright (C) 1995 Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>
- * Eberhard Moenkeberg <emoenke@gwdg.de>
- *
- * Published under the GPL.
- *
- */
-
-
-/* The Interface Card default address is 0x340. This will work for most
- applications. Address selection is accomplished by jumpers PN801-1 to
- PN801-4 on the GoldStar Interface Card.
- Appropriate settings are: 0x300, 0x310, 0x320, 0x330, 0x340, 0x350, 0x360
- 0x370, 0x380, 0x390, 0x3A0, 0x3B0, 0x3C0, 0x3D0, 0x3E0, 0x3F0 */
-
-/* insert here the I/O port address and extent */
-#define GSCD_BASE_ADDR 0x340
-#define GSCD_IO_EXTENT 4
-
-
-/************** nothing to set up below here *********************/
-
-/* port access macro */
-#define GSCDPORT(x) (gscd_port + (x))
-
-/*
- * commands
- * the lower nibble holds the command length
- */
-#define CMD_STATUS 0x01
-#define CMD_READSUBQ 0x02 /* 1: ?, 2: UPC, 5: ? */
-#define CMD_SEEK 0x05 /* read_mode M-S-F */
-#define CMD_READ 0x07 /* read_mode M-S-F nsec_h nsec_l */
-#define CMD_RESET 0x11
-#define CMD_SETMODE 0x15
-#define CMD_PLAY 0x17 /* M-S-F M-S-F */
-#define CMD_LOCK_CTL 0x22 /* 0: unlock, 1: lock */
-#define CMD_IDENT 0x31
-#define CMD_SETSPEED 0x32 /* 0: auto */ /* ??? */
-#define CMD_GETMODE 0x41
-#define CMD_PAUSE 0x51
-#define CMD_READTOC 0x61
-#define CMD_DISKINFO 0x71
-#define CMD_TRAY_CTL 0x81
-
-/*
- * disk_state:
- */
-#define ST_PLAYING 0x80
-#define ST_UNLOCKED 0x40
-#define ST_NO_DISK 0x20
-#define ST_DOOR_OPEN 0x10
-#define ST_x08 0x08
-#define ST_x04 0x04
-#define ST_INVALID 0x02
-#define ST_x01 0x01
-
-/*
- * cmd_type:
- */
-#define TYPE_INFO 0x01
-#define TYPE_DATA 0x02
-
-/*
- * read_mode:
- */
-#define MOD_POLLED 0x80
-#define MOD_x08 0x08
-#define MOD_RAW 0x04
-
-#define READ_DATA(port, buf, nr) insb(port, buf, nr)
-
-#define SET_TIMER(func, jifs) \
- ((mod_timer(&gscd_timer, jiffies + jifs)), \
- (gscd_timer.function = func))
-
-#define CLEAR_TIMER del_timer_sync(&gscd_timer)
-
-#define MAX_TRACKS 104
-
-struct msf {
- unsigned char min;
- unsigned char sec;
- unsigned char frame;
-};
-
-struct gscd_Play_msf {
- struct msf start;
- struct msf end;
-};
-
-struct gscd_DiskInfo {
- unsigned char first;
- unsigned char last;
- struct msf diskLength;
- struct msf firstTrack;
-};
-
-struct gscd_Toc {
- unsigned char ctrl_addr;
- unsigned char track;
- unsigned char pointIndex;
- struct msf trackTime;
- struct msf diskTime;
-};
-
diff --git a/drivers/cdrom/isp16.c b/drivers/cdrom/isp16.c
deleted file mode 100644
index db0fd9a240e3..000000000000
--- a/drivers/cdrom/isp16.c
+++ /dev/null
@@ -1,374 +0,0 @@
-/* -- ISP16 cdrom detection and configuration
- *
- * Copyright (c) 1995,1996 Eric van der Maarel <H.T.M.v.d.Maarel@marin.nl>
- *
- * Version 0.6
- *
- * History:
- * 0.5 First release.
- * Was included in the sjcd and optcd cdrom drivers.
- * 0.6 First "stand-alone" version.
- * Removed sound configuration.
- * Added "module" support.
- *
- * 9 November 1999 -- Make kernel-parameter implementation work with 2.3.x
- * Removed init_module & cleanup_module in favor of
- * module_init & module_exit.
- * Torben Mathiasen <tmm@image.dk>
- *
- * 19 June 2004 -- check_region() converted to request_region()
- * and return statement cleanups.
- * - Jesper Juhl
- *
- * Detect cdrom interface on ISP16 sound card.
- * Configure cdrom interface.
- *
- * Algorithm for the card with OPTi 82C928 taken
- * from the CDSETUP.SYS driver for MSDOS,
- * by OPTi Computers, version 2.03.
- * Algorithm for the card with OPTi 82C929 as communicated
- * to me by Vadim Model and Leo Spiekman.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#define ISP16_VERSION_MAJOR 0
-#define ISP16_VERSION_MINOR 6
-
-#include <linux/module.h>
-
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include "isp16.h"
-
-static short isp16_detect(void);
-static short isp16_c928__detect(void);
-static short isp16_c929__detect(void);
-static short isp16_cdi_config(int base, u_char drive_type, int irq,
- int dma);
-static short isp16_type; /* dependent on type of interface card */
-static u_char isp16_ctrl;
-static u_short isp16_enable_port;
-
-static int isp16_cdrom_base = ISP16_CDROM_IO_BASE;
-static int isp16_cdrom_irq = ISP16_CDROM_IRQ;
-static int isp16_cdrom_dma = ISP16_CDROM_DMA;
-static char *isp16_cdrom_type = ISP16_CDROM_TYPE;
-
-module_param(isp16_cdrom_base, int, 0);
-module_param(isp16_cdrom_irq, int, 0);
-module_param(isp16_cdrom_dma, int, 0);
-module_param(isp16_cdrom_type, charp, 0);
-
-#define ISP16_IN(p) (outb(isp16_ctrl,ISP16_CTRL_PORT), inb(p))
-#define ISP16_OUT(p,b) (outb(isp16_ctrl,ISP16_CTRL_PORT), outb(b,p))
-
-#ifndef MODULE
-
-static int
-__init isp16_setup(char *str)
-{
- int ints[4];
-
- (void) get_options(str, ARRAY_SIZE(ints), ints);
- if (ints[0] > 0)
- isp16_cdrom_base = ints[1];
- if (ints[0] > 1)
- isp16_cdrom_irq = ints[2];
- if (ints[0] > 2)
- isp16_cdrom_dma = ints[3];
- if (str)
- isp16_cdrom_type = str;
-
- return 1;
-}
-
-__setup("isp16=", isp16_setup);
-
-#endif /* MODULE */
-
-/*
- * ISP16 initialisation.
- *
- */
-static int __init isp16_init(void)
-{
- u_char expected_drive;
-
- printk(KERN_INFO
- "ISP16: configuration cdrom interface, version %d.%d.\n",
- ISP16_VERSION_MAJOR, ISP16_VERSION_MINOR);
-
- if (!strcmp(isp16_cdrom_type, "noisp16")) {
- printk("ISP16: no cdrom interface configured.\n");
- return 0;
- }
-
- if (!request_region(ISP16_IO_BASE, ISP16_IO_SIZE, "isp16")) {
- printk("ISP16: i/o ports already in use.\n");
- goto out;
- }
-
- if ((isp16_type = isp16_detect()) < 0) {
- printk("ISP16: no cdrom interface found.\n");
- goto cleanup_out;
- }
-
- printk(KERN_INFO
- "ISP16: cdrom interface (with OPTi 82C92%d chip) detected.\n",
- (isp16_type == 2) ? 9 : 8);
-
- if (!strcmp(isp16_cdrom_type, "Sanyo"))
- expected_drive =
- (isp16_type ? ISP16_SANYO1 : ISP16_SANYO0);
- else if (!strcmp(isp16_cdrom_type, "Sony"))
- expected_drive = ISP16_SONY;
- else if (!strcmp(isp16_cdrom_type, "Panasonic"))
- expected_drive =
- (isp16_type ? ISP16_PANASONIC1 : ISP16_PANASONIC0);
- else if (!strcmp(isp16_cdrom_type, "Mitsumi"))
- expected_drive = ISP16_MITSUMI;
- else {
- printk("ISP16: %s not supported by cdrom interface.\n",
- isp16_cdrom_type);
- goto cleanup_out;
- }
-
- if (isp16_cdi_config(isp16_cdrom_base, expected_drive,
- isp16_cdrom_irq, isp16_cdrom_dma) < 0) {
- printk
- ("ISP16: cdrom interface has not been properly configured.\n");
- goto cleanup_out;
- }
- printk(KERN_INFO
- "ISP16: cdrom interface set up with io base 0x%03X, irq %d, dma %d,"
- " type %s.\n", isp16_cdrom_base, isp16_cdrom_irq,
- isp16_cdrom_dma, isp16_cdrom_type);
- return 0;
-
-cleanup_out:
- release_region(ISP16_IO_BASE, ISP16_IO_SIZE);
-out:
- return -EIO;
-}
-
-static short __init isp16_detect(void)
-{
-
- if (isp16_c929__detect() >= 0)
- return 2;
- else
- return (isp16_c928__detect());
-}
-
-static short __init isp16_c928__detect(void)
-{
- u_char ctrl;
- u_char enable_cdrom;
- u_char io;
- short i = -1;
-
- isp16_ctrl = ISP16_C928__CTRL;
- isp16_enable_port = ISP16_C928__ENABLE_PORT;
-
- /* read' and write' are a special read and write, respectively */
-
- /* read' ISP16_CTRL_PORT, clear last two bits and write' back the result */
- ctrl = ISP16_IN(ISP16_CTRL_PORT) & 0xFC;
- ISP16_OUT(ISP16_CTRL_PORT, ctrl);
-
- /* read' 3,4 and 5-bit from the cdrom enable port */
- enable_cdrom = ISP16_IN(ISP16_C928__ENABLE_PORT) & 0x38;
-
- if (!(enable_cdrom & 0x20)) { /* 5-bit not set */
- /* read' last 2 bits of ISP16_IO_SET_PORT */
- io = ISP16_IN(ISP16_IO_SET_PORT) & 0x03;
- if (((io & 0x01) << 1) == (io & 0x02)) { /* bits are the same */
- if (io == 0) { /* ...the same and 0 */
- i = 0;
- enable_cdrom |= 0x20;
- } else { /* ...the same and 1 *//* my card, first time 'round */
- i = 1;
- enable_cdrom |= 0x28;
- }
- ISP16_OUT(ISP16_C928__ENABLE_PORT, enable_cdrom);
- } else { /* bits are not the same */
- ISP16_OUT(ISP16_CTRL_PORT, ctrl);
- return i; /* -> not detected: possibly incorrect conclusion */
- }
- } else if (enable_cdrom == 0x20)
- i = 0;
- else if (enable_cdrom == 0x28) /* my card, already initialised */
- i = 1;
-
- ISP16_OUT(ISP16_CTRL_PORT, ctrl);
-
- return i;
-}
-
-static short __init isp16_c929__detect(void)
-{
- u_char ctrl;
- u_char tmp;
-
- isp16_ctrl = ISP16_C929__CTRL;
- isp16_enable_port = ISP16_C929__ENABLE_PORT;
-
- /* read' and write' are a special read and write, respectively */
-
- /* read' ISP16_CTRL_PORT and save */
- ctrl = ISP16_IN(ISP16_CTRL_PORT);
-
- /* write' zero to the ctrl port and get response */
- ISP16_OUT(ISP16_CTRL_PORT, 0);
- tmp = ISP16_IN(ISP16_CTRL_PORT);
-
- if (tmp != 2) /* isp16 with 82C929 not detected */
- return -1;
-
- /* restore ctrl port value */
- ISP16_OUT(ISP16_CTRL_PORT, ctrl);
-
- return 2;
-}
-
-static short __init
-isp16_cdi_config(int base, u_char drive_type, int irq, int dma)
-{
- u_char base_code;
- u_char irq_code;
- u_char dma_code;
- u_char i;
-
- if ((drive_type == ISP16_MITSUMI) && (dma != 0))
- printk("ISP16: Mitsumi cdrom drive has no dma support.\n");
-
- switch (base) {
- case 0x340:
- base_code = ISP16_BASE_340;
- break;
- case 0x330:
- base_code = ISP16_BASE_330;
- break;
- case 0x360:
- base_code = ISP16_BASE_360;
- break;
- case 0x320:
- base_code = ISP16_BASE_320;
- break;
- default:
- printk
- ("ISP16: base address 0x%03X not supported by cdrom interface.\n",
- base);
- return -1;
- }
- switch (irq) {
- case 0:
- irq_code = ISP16_IRQ_X;
- break; /* disable irq */
- case 5:
- irq_code = ISP16_IRQ_5;
- printk("ISP16: irq 5 shouldn't be used by cdrom interface,"
- " due to possible conflicts with the sound card.\n");
- break;
- case 7:
- irq_code = ISP16_IRQ_7;
- printk("ISP16: irq 7 shouldn't be used by cdrom interface,"
- " due to possible conflicts with the sound card.\n");
- break;
- case 3:
- irq_code = ISP16_IRQ_3;
- break;
- case 9:
- irq_code = ISP16_IRQ_9;
- break;
- case 10:
- irq_code = ISP16_IRQ_10;
- break;
- case 11:
- irq_code = ISP16_IRQ_11;
- break;
- default:
- printk("ISP16: irq %d not supported by cdrom interface.\n",
- irq);
- return -1;
- }
- switch (dma) {
- case 0:
- dma_code = ISP16_DMA_X;
- break; /* disable dma */
- case 1:
- printk("ISP16: dma 1 cannot be used by cdrom interface,"
- " due to conflict with the sound card.\n");
- return -1;
- break;
- case 3:
- dma_code = ISP16_DMA_3;
- break;
- case 5:
- dma_code = ISP16_DMA_5;
- break;
- case 6:
- dma_code = ISP16_DMA_6;
- break;
- case 7:
- dma_code = ISP16_DMA_7;
- break;
- default:
- printk("ISP16: dma %d not supported by cdrom interface.\n",
- dma);
- return -1;
- }
-
- if (drive_type != ISP16_SONY && drive_type != ISP16_PANASONIC0 &&
- drive_type != ISP16_PANASONIC1 && drive_type != ISP16_SANYO0 &&
- drive_type != ISP16_SANYO1 && drive_type != ISP16_MITSUMI &&
- drive_type != ISP16_DRIVE_X) {
- printk
- ("ISP16: drive type (code 0x%02X) not supported by cdrom"
- " interface.\n", drive_type);
- return -1;
- }
-
- /* set type of interface */
- i = ISP16_IN(ISP16_DRIVE_SET_PORT) & ISP16_DRIVE_SET_MASK; /* clear some bits */
- ISP16_OUT(ISP16_DRIVE_SET_PORT, i | drive_type);
-
- /* enable cdrom on interface with 82C929 chip */
- if (isp16_type > 1)
- ISP16_OUT(isp16_enable_port, ISP16_ENABLE_CDROM);
-
- /* set base address, irq and dma */
- i = ISP16_IN(ISP16_IO_SET_PORT) & ISP16_IO_SET_MASK; /* keep some bits */
- ISP16_OUT(ISP16_IO_SET_PORT, i | base_code | irq_code | dma_code);
-
- return 0;
-}
-
-static void __exit isp16_exit(void)
-{
- release_region(ISP16_IO_BASE, ISP16_IO_SIZE);
- printk(KERN_INFO "ISP16: module released.\n");
-}
-
-module_init(isp16_init);
-module_exit(isp16_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/cdrom/isp16.h b/drivers/cdrom/isp16.h
deleted file mode 100644
index 5bd22c8f7a96..000000000000
--- a/drivers/cdrom/isp16.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* -- isp16.h
- *
- * Header for detection and initialisation of cdrom interface (only) on
- * ISP16 (MAD16, Mozart) sound card.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/* These are the default values */
-#define ISP16_CDROM_TYPE "Sanyo"
-#define ISP16_CDROM_IO_BASE 0x340
-#define ISP16_CDROM_IRQ 0
-#define ISP16_CDROM_DMA 0
-
-/* Some (Media)Magic */
-/* define types of drive the interface on an ISP16 card may be looking at */
-#define ISP16_DRIVE_X 0x00
-#define ISP16_SONY 0x02
-#define ISP16_PANASONIC0 0x02
-#define ISP16_SANYO0 0x02
-#define ISP16_MITSUMI 0x04
-#define ISP16_PANASONIC1 0x06
-#define ISP16_SANYO1 0x06
-#define ISP16_DRIVE_NOT_USED 0x08 /* not used */
-#define ISP16_DRIVE_SET_MASK 0xF1 /* don't change 0-bit or 4-7-bits*/
-/* ...for port */
-#define ISP16_DRIVE_SET_PORT 0xF8D
-/* set io parameters */
-#define ISP16_BASE_340 0x00
-#define ISP16_BASE_330 0x40
-#define ISP16_BASE_360 0x80
-#define ISP16_BASE_320 0xC0
-#define ISP16_IRQ_X 0x00
-#define ISP16_IRQ_5 0x04 /* shouldn't be used to avoid sound card conflicts */
-#define ISP16_IRQ_7 0x08 /* shouldn't be used to avoid sound card conflicts */
-#define ISP16_IRQ_3 0x0C
-#define ISP16_IRQ_9 0x10
-#define ISP16_IRQ_10 0x14
-#define ISP16_IRQ_11 0x18
-#define ISP16_DMA_X 0x03
-#define ISP16_DMA_3 0x00
-#define ISP16_DMA_5 0x00
-#define ISP16_DMA_6 0x01
-#define ISP16_DMA_7 0x02
-#define ISP16_IO_SET_MASK 0x20 /* don't change 5-bit */
-/* ...for port */
-#define ISP16_IO_SET_PORT 0xF8E
-/* enable the card */
-#define ISP16_C928__ENABLE_PORT 0xF90 /* ISP16 with OPTi 82C928 chip */
-#define ISP16_C929__ENABLE_PORT 0xF91 /* ISP16 with OPTi 82C929 chip */
-#define ISP16_ENABLE_CDROM 0x80 /* seven bit */
-
-/* the magic stuff */
-#define ISP16_CTRL_PORT 0xF8F
-#define ISP16_C928__CTRL 0xE2 /* ISP16 with OPTi 82C928 chip */
-#define ISP16_C929__CTRL 0xE3 /* ISP16 with OPTi 82C929 chip */
-
-#define ISP16_IO_BASE 0xF8D
-#define ISP16_IO_SIZE 5 /* ports used from 0xF8D up to 0xF91 */
diff --git a/drivers/cdrom/mcdx.c b/drivers/cdrom/mcdx.c
deleted file mode 100644
index 972ee9c8247c..000000000000
--- a/drivers/cdrom/mcdx.c
+++ /dev/null
@@ -1,1943 +0,0 @@
-/*
- * The Mitsumi CDROM interface
- * Copyright (C) 1995 1996 Heiko Schlittermann <heiko@lotte.sax.de>
- * VERSION: 2.14(hs)
- *
- * ... anyway, I'm back again, thanks to Marcin, he adopted
- * large portions of my code (at least the parts containing
- * my main thoughts ...)
- *
- ****************** H E L P *********************************
- * If you ever plan to update your CD ROM drive and perhaps
- * want to sell or simply give away your Mitsumi FX-001[DS]
- * -- Please --
- * mail me (heiko@lotte.sax.de). When my last drive goes
- * ballistic no more driver support will be available from me!
- *************************************************************
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Thanks to
- * The Linux Community at all and ...
- * Martin Harriss (he wrote the first Mitsumi Driver)
- * Eberhard Moenkeberg (he gave me much support and the initial kick)
- * Bernd Huebner, Ruediger Helsch (Unifix-Software GmbH, they
- * improved the original driver)
- * Jon Tombs, Bjorn Ekwall (module support)
- * Daniel v. Mosnenck (he sent me the Technical and Programming Reference)
- * Gerd Knorr (he lent me his PhotoCD)
- * Nils Faerber and Roger E. Wolff (extensively tested the LU portion)
- * Andreas Kies (testing the mysterious hang-ups)
- * Heiko Eissfeldt (VERIFY_READ/WRITE)
- * Marcin Dalecki (improved performance, shortened code)
- * ... somebody forgotten?
- *
- * 9 November 1999 -- Make kernel-parameter implementation work with 2.3.x
- * Removed init_module & cleanup_module in favor of
- * module_init & module_exit.
- * Torben Mathiasen <tmm@image.dk>
- */
-
-
-#ifdef RCS
-static const char *mcdx_c_version
- = "$Id: mcdx.c,v 1.21 1997/01/26 07:12:59 davem Exp $";
-#endif
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/current.h>
-#include <asm/uaccess.h>
-
-#include <linux/major.h>
-#define MAJOR_NR MITSUMI_X_CDROM_MAJOR
-#include <linux/blkdev.h>
-
-#include "mcdx.h"
-
-#ifndef HZ
-#error HZ not defined
-#endif
-
-#define xwarn(fmt, args...) printk(KERN_WARNING MCDX " " fmt, ## args)
-
-#if !MCDX_QUIET
-#define xinfo(fmt, args...) printk(KERN_INFO MCDX " " fmt, ## args)
-#else
-#define xinfo(fmt, args...) { ; }
-#endif
-
-#if MCDX_DEBUG
-#define xtrace(lvl, fmt, args...) \
- { if (lvl > 0) \
- { printk(KERN_DEBUG MCDX ":: " fmt, ## args); } }
-#define xdebug(fmt, args...) printk(KERN_DEBUG MCDX ":: " fmt, ## args)
-#else
-#define xtrace(lvl, fmt, args...) { ; }
-#define xdebug(fmt, args...) { ; }
-#endif
-
-/* CONSTANTS *******************************************************/
-
-/* Following are the number of sectors we _request_ from the drive
- every time an access outside the already requested range is done.
- The _direct_ size is the number of sectors we're allowed to skip
- directly (performing a read instead of requesting the new sector
- needed */
-static const int REQUEST_SIZE = 800; /* should be less then 255 * 4 */
-static const int DIRECT_SIZE = 400; /* should be less then REQUEST_SIZE */
-
-enum drivemodes { TOC, DATA, RAW, COOKED };
-enum datamodes { MODE0, MODE1, MODE2 };
-enum resetmodes { SOFT, HARD };
-
-static const int SINGLE = 0x01; /* single speed drive (FX001S, LU) */
-static const int DOUBLE = 0x02; /* double speed drive (FX001D, ..? */
-static const int DOOR = 0x04; /* door locking capability */
-static const int MULTI = 0x08; /* multi session capability */
-
-static const unsigned char READ1X = 0xc0;
-static const unsigned char READ2X = 0xc1;
-
-
-/* DECLARATIONS ****************************************************/
-struct s_subqcode {
- unsigned char control;
- unsigned char tno;
- unsigned char index;
- struct cdrom_msf0 tt;
- struct cdrom_msf0 dt;
-};
-
-struct s_diskinfo {
- unsigned int n_first;
- unsigned int n_last;
- struct cdrom_msf0 msf_leadout;
- struct cdrom_msf0 msf_first;
-};
-
-struct s_multi {
- unsigned char multi;
- struct cdrom_msf0 msf_last;
-};
-
-struct s_version {
- unsigned char code;
- unsigned char ver;
-};
-
-/* Per drive/controller stuff **************************************/
-
-struct s_drive_stuff {
- /* waitqueues */
- wait_queue_head_t busyq;
- wait_queue_head_t lockq;
- wait_queue_head_t sleepq;
-
- /* flags */
- volatile int introk; /* status of last irq operation */
- volatile int busy; /* drive performs an operation */
- volatile int lock; /* exclusive usage */
-
- /* cd infos */
- struct s_diskinfo di;
- struct s_multi multi;
- struct s_subqcode *toc; /* first entry of the toc array */
- struct s_subqcode start;
- struct s_subqcode stop;
- int xa; /* 1 if xa disk */
- int audio; /* 1 if audio disk */
- int audiostatus;
-
- /* `buffer' control */
- volatile int valid; /* pending, ..., values are valid */
- volatile int pending; /* next sector to be read */
- volatile int low_border; /* first sector not to be skipped direct */
- volatile int high_border; /* first sector `out of area' */
-#ifdef AK2
- volatile int int_err;
-#endif /* AK2 */
-
- /* adds and odds */
- unsigned wreg_data; /* w data */
- unsigned wreg_reset; /* w hardware reset */
- unsigned wreg_hcon; /* w hardware conf */
- unsigned wreg_chn; /* w channel */
- unsigned rreg_data; /* r data */
- unsigned rreg_status; /* r status */
-
- int irq; /* irq used by this drive */
- int present; /* drive present and its capabilities */
- unsigned char readcmd; /* read cmd depends on single/double speed */
- unsigned char playcmd; /* play should always be single speed */
- unsigned int xxx; /* set if changed, reset while open */
- unsigned int yyy; /* set if changed, reset by media_changed */
- int users; /* keeps track of open/close */
- int lastsector; /* last block accessible */
- int status; /* last operation's error / status */
- int readerrs; /* # of blocks read w/o error */
- struct cdrom_device_info info;
- struct gendisk *disk;
-};
-
-
-/* Prototypes ******************************************************/
-
-/* The following prototypes are already declared elsewhere. They are
- repeated here to show what's going on. And to sense, if they're
- changed elsewhere. */
-
-static int mcdx_init(void);
-
-static int mcdx_block_open(struct inode *inode, struct file *file)
-{
- struct s_drive_stuff *p = inode->i_bdev->bd_disk->private_data;
- return cdrom_open(&p->info, inode, file);
-}
-
-static int mcdx_block_release(struct inode *inode, struct file *file)
-{
- struct s_drive_stuff *p = inode->i_bdev->bd_disk->private_data;
- return cdrom_release(&p->info, file);
-}
-
-static int mcdx_block_ioctl(struct inode *inode, struct file *file,
- unsigned cmd, unsigned long arg)
-{
- struct s_drive_stuff *p = inode->i_bdev->bd_disk->private_data;
- return cdrom_ioctl(file, &p->info, inode, cmd, arg);
-}
-
-static int mcdx_block_media_changed(struct gendisk *disk)
-{
- struct s_drive_stuff *p = disk->private_data;
- return cdrom_media_changed(&p->info);
-}
-
-static struct block_device_operations mcdx_bdops =
-{
- .owner = THIS_MODULE,
- .open = mcdx_block_open,
- .release = mcdx_block_release,
- .ioctl = mcdx_block_ioctl,
- .media_changed = mcdx_block_media_changed,
-};
-
-
-/* Indirect exported functions. These functions are exported by their
- addresses, such as mcdx_open and mcdx_close in the
- structure mcdx_dops. */
-
-/* exported by file_ops */
-static int mcdx_open(struct cdrom_device_info *cdi, int purpose);
-static void mcdx_close(struct cdrom_device_info *cdi);
-static int mcdx_media_changed(struct cdrom_device_info *cdi, int disc_nr);
-static int mcdx_tray_move(struct cdrom_device_info *cdi, int position);
-static int mcdx_lockdoor(struct cdrom_device_info *cdi, int lock);
-static int mcdx_audio_ioctl(struct cdrom_device_info *cdi,
- unsigned int cmd, void *arg);
-
-/* misc internal support functions */
-static void log2msf(unsigned int, struct cdrom_msf0 *);
-static unsigned int msf2log(const struct cdrom_msf0 *);
-static unsigned int uint2bcd(unsigned int);
-static unsigned int bcd2uint(unsigned char);
-static unsigned port(int *);
-static int irq(int *);
-static void mcdx_delay(struct s_drive_stuff *, long jifs);
-static int mcdx_transfer(struct s_drive_stuff *, char *buf, int sector,
- int nr_sectors);
-static int mcdx_xfer(struct s_drive_stuff *, char *buf, int sector,
- int nr_sectors);
-
-static int mcdx_config(struct s_drive_stuff *, int);
-static int mcdx_requestversion(struct s_drive_stuff *, struct s_version *,
- int);
-static int mcdx_stop(struct s_drive_stuff *, int);
-static int mcdx_hold(struct s_drive_stuff *, int);
-static int mcdx_reset(struct s_drive_stuff *, enum resetmodes, int);
-static int mcdx_setdrivemode(struct s_drive_stuff *, enum drivemodes, int);
-static int mcdx_setdatamode(struct s_drive_stuff *, enum datamodes, int);
-static int mcdx_requestsubqcode(struct s_drive_stuff *,
- struct s_subqcode *, int);
-static int mcdx_requestmultidiskinfo(struct s_drive_stuff *,
- struct s_multi *, int);
-static int mcdx_requesttocdata(struct s_drive_stuff *, struct s_diskinfo *,
- int);
-static int mcdx_getstatus(struct s_drive_stuff *, int);
-static int mcdx_getval(struct s_drive_stuff *, int to, int delay, char *);
-static int mcdx_talk(struct s_drive_stuff *,
- const unsigned char *cmd, size_t,
- void *buffer, size_t size, unsigned int timeout, int);
-static int mcdx_readtoc(struct s_drive_stuff *);
-static int mcdx_playtrk(struct s_drive_stuff *, const struct cdrom_ti *);
-static int mcdx_playmsf(struct s_drive_stuff *, const struct cdrom_msf *);
-static int mcdx_setattentuator(struct s_drive_stuff *,
- struct cdrom_volctrl *, int);
-
-/* static variables ************************************************/
-
-static int mcdx_drive_map[][2] = MCDX_DRIVEMAP;
-static struct s_drive_stuff *mcdx_stuffp[MCDX_NDRIVES];
-static DEFINE_SPINLOCK(mcdx_lock);
-static struct request_queue *mcdx_queue;
-
-/* You can only set the first two pairs, from old MODULE_PARM code. */
-static int mcdx_set(const char *val, struct kernel_param *kp)
-{
- get_options((char *)val, 4, (int *)mcdx_drive_map);
- return 0;
-}
-module_param_call(mcdx, mcdx_set, NULL, NULL, 0);
-
-static struct cdrom_device_ops mcdx_dops = {
- .open = mcdx_open,
- .release = mcdx_close,
- .media_changed = mcdx_media_changed,
- .tray_move = mcdx_tray_move,
- .lock_door = mcdx_lockdoor,
- .audio_ioctl = mcdx_audio_ioctl,
- .capability = CDC_OPEN_TRAY | CDC_LOCK | CDC_MEDIA_CHANGED |
- CDC_PLAY_AUDIO | CDC_DRIVE_STATUS,
-};
-
-/* KERNEL INTERFACE FUNCTIONS **************************************/
-
-
-static int mcdx_audio_ioctl(struct cdrom_device_info *cdi,
- unsigned int cmd, void *arg)
-{
- struct s_drive_stuff *stuffp = cdi->handle;
-
- if (!stuffp->present)
- return -ENXIO;
-
- if (stuffp->xxx) {
- if (-1 == mcdx_requesttocdata(stuffp, &stuffp->di, 1)) {
- stuffp->lastsector = -1;
- } else {
- stuffp->lastsector = (CD_FRAMESIZE / 512)
- * msf2log(&stuffp->di.msf_leadout) - 1;
- }
-
- if (stuffp->toc) {
- kfree(stuffp->toc);
- stuffp->toc = NULL;
- if (-1 == mcdx_readtoc(stuffp))
- return -1;
- }
-
- stuffp->xxx = 0;
- }
-
- switch (cmd) {
- case CDROMSTART:{
- xtrace(IOCTL, "ioctl() START\n");
- /* Spin up the drive. Don't think we can do this.
- * For now, ignore it.
- */
- return 0;
- }
-
- case CDROMSTOP:{
- xtrace(IOCTL, "ioctl() STOP\n");
- stuffp->audiostatus = CDROM_AUDIO_INVALID;
- if (-1 == mcdx_stop(stuffp, 1))
- return -EIO;
- return 0;
- }
-
- case CDROMPLAYTRKIND:{
- struct cdrom_ti *ti = (struct cdrom_ti *) arg;
-
- xtrace(IOCTL, "ioctl() PLAYTRKIND\n");
- if ((ti->cdti_trk0 < stuffp->di.n_first)
- || (ti->cdti_trk0 > stuffp->di.n_last)
- || (ti->cdti_trk1 < stuffp->di.n_first))
- return -EINVAL;
- if (ti->cdti_trk1 > stuffp->di.n_last)
- ti->cdti_trk1 = stuffp->di.n_last;
- xtrace(PLAYTRK, "ioctl() track %d to %d\n",
- ti->cdti_trk0, ti->cdti_trk1);
- return mcdx_playtrk(stuffp, ti);
- }
-
- case CDROMPLAYMSF:{
- struct cdrom_msf *msf = (struct cdrom_msf *) arg;
-
- xtrace(IOCTL, "ioctl() PLAYMSF\n");
-
- if ((stuffp->audiostatus == CDROM_AUDIO_PLAY)
- && (-1 == mcdx_hold(stuffp, 1)))
- return -EIO;
-
- msf->cdmsf_min0 = uint2bcd(msf->cdmsf_min0);
- msf->cdmsf_sec0 = uint2bcd(msf->cdmsf_sec0);
- msf->cdmsf_frame0 = uint2bcd(msf->cdmsf_frame0);
-
- msf->cdmsf_min1 = uint2bcd(msf->cdmsf_min1);
- msf->cdmsf_sec1 = uint2bcd(msf->cdmsf_sec1);
- msf->cdmsf_frame1 = uint2bcd(msf->cdmsf_frame1);
-
- stuffp->stop.dt.minute = msf->cdmsf_min1;
- stuffp->stop.dt.second = msf->cdmsf_sec1;
- stuffp->stop.dt.frame = msf->cdmsf_frame1;
-
- return mcdx_playmsf(stuffp, msf);
- }
-
- case CDROMRESUME:{
- xtrace(IOCTL, "ioctl() RESUME\n");
- return mcdx_playtrk(stuffp, NULL);
- }
-
- case CDROMREADTOCENTRY:{
- struct cdrom_tocentry *entry =
- (struct cdrom_tocentry *) arg;
- struct s_subqcode *tp = NULL;
- xtrace(IOCTL, "ioctl() READTOCENTRY\n");
-
- if (-1 == mcdx_readtoc(stuffp))
- return -1;
- if (entry->cdte_track == CDROM_LEADOUT)
- tp = &stuffp->toc[stuffp->di.n_last -
- stuffp->di.n_first + 1];
- else if (entry->cdte_track > stuffp->di.n_last
- || entry->cdte_track < stuffp->di.n_first)
- return -EINVAL;
- else
- tp = &stuffp->toc[entry->cdte_track -
- stuffp->di.n_first];
-
- if (NULL == tp)
- return -EIO;
- entry->cdte_adr = tp->control;
- entry->cdte_ctrl = tp->control >> 4;
- /* Always return stuff in MSF, and let the Uniform cdrom driver
- worry about what the user actually wants */
- entry->cdte_addr.msf.minute =
- bcd2uint(tp->dt.minute);
- entry->cdte_addr.msf.second =
- bcd2uint(tp->dt.second);
- entry->cdte_addr.msf.frame =
- bcd2uint(tp->dt.frame);
- return 0;
- }
-
- case CDROMSUBCHNL:{
- struct cdrom_subchnl *sub =
- (struct cdrom_subchnl *) arg;
- struct s_subqcode q;
-
- xtrace(IOCTL, "ioctl() SUBCHNL\n");
-
- if (-1 == mcdx_requestsubqcode(stuffp, &q, 2))
- return -EIO;
-
- xtrace(SUBCHNL, "audiostatus: %x\n",
- stuffp->audiostatus);
- sub->cdsc_audiostatus = stuffp->audiostatus;
- sub->cdsc_adr = q.control;
- sub->cdsc_ctrl = q.control >> 4;
- sub->cdsc_trk = bcd2uint(q.tno);
- sub->cdsc_ind = bcd2uint(q.index);
-
- xtrace(SUBCHNL, "trk %d, ind %d\n",
- sub->cdsc_trk, sub->cdsc_ind);
- /* Always return stuff in MSF, and let the Uniform cdrom driver
- worry about what the user actually wants */
- sub->cdsc_absaddr.msf.minute =
- bcd2uint(q.dt.minute);
- sub->cdsc_absaddr.msf.second =
- bcd2uint(q.dt.second);
- sub->cdsc_absaddr.msf.frame = bcd2uint(q.dt.frame);
- sub->cdsc_reladdr.msf.minute =
- bcd2uint(q.tt.minute);
- sub->cdsc_reladdr.msf.second =
- bcd2uint(q.tt.second);
- sub->cdsc_reladdr.msf.frame = bcd2uint(q.tt.frame);
- xtrace(SUBCHNL,
- "msf: abs %02d:%02d:%02d, rel %02d:%02d:%02d\n",
- sub->cdsc_absaddr.msf.minute,
- sub->cdsc_absaddr.msf.second,
- sub->cdsc_absaddr.msf.frame,
- sub->cdsc_reladdr.msf.minute,
- sub->cdsc_reladdr.msf.second,
- sub->cdsc_reladdr.msf.frame);
-
- return 0;
- }
-
- case CDROMREADTOCHDR:{
- struct cdrom_tochdr *toc =
- (struct cdrom_tochdr *) arg;
-
- xtrace(IOCTL, "ioctl() READTOCHDR\n");
- toc->cdth_trk0 = stuffp->di.n_first;
- toc->cdth_trk1 = stuffp->di.n_last;
- xtrace(TOCHDR,
- "ioctl() track0 = %d, track1 = %d\n",
- stuffp->di.n_first, stuffp->di.n_last);
- return 0;
- }
-
- case CDROMPAUSE:{
- xtrace(IOCTL, "ioctl() PAUSE\n");
- if (stuffp->audiostatus != CDROM_AUDIO_PLAY)
- return -EINVAL;
- if (-1 == mcdx_stop(stuffp, 1))
- return -EIO;
- stuffp->audiostatus = CDROM_AUDIO_PAUSED;
- if (-1 ==
- mcdx_requestsubqcode(stuffp, &stuffp->start,
- 1))
- return -EIO;
- return 0;
- }
-
- case CDROMMULTISESSION:{
- struct cdrom_multisession *ms =
- (struct cdrom_multisession *) arg;
- xtrace(IOCTL, "ioctl() MULTISESSION\n");
- /* Always return stuff in LBA, and let the Uniform cdrom driver
- worry about what the user actually wants */
- ms->addr.lba = msf2log(&stuffp->multi.msf_last);
- ms->xa_flag = !!stuffp->multi.multi;
- xtrace(MS,
- "ioctl() (%d, 0x%08x [%02x:%02x.%02x])\n",
- ms->xa_flag, ms->addr.lba,
- stuffp->multi.msf_last.minute,
- stuffp->multi.msf_last.second,
- stuffp->multi.msf_last.frame);
-
- return 0;
- }
-
- case CDROMEJECT:{
- xtrace(IOCTL, "ioctl() EJECT\n");
- if (stuffp->users > 1)
- return -EBUSY;
- return (mcdx_tray_move(cdi, 1));
- }
-
- case CDROMCLOSETRAY:{
- xtrace(IOCTL, "ioctl() CDROMCLOSETRAY\n");
- return (mcdx_tray_move(cdi, 0));
- }
-
- case CDROMVOLCTRL:{
- struct cdrom_volctrl *volctrl =
- (struct cdrom_volctrl *) arg;
- xtrace(IOCTL, "ioctl() VOLCTRL\n");
-
-#if 0 /* not tested! */
- /* adjust for the weirdness of workman (md) */
- /* can't test it (hs) */
- volctrl.channel2 = volctrl.channel1;
- volctrl.channel1 = volctrl.channel3 = 0x00;
-#endif
- return mcdx_setattentuator(stuffp, volctrl, 2);
- }
-
- default:
- return -EINVAL;
- }
-}
-
-static void do_mcdx_request(request_queue_t * q)
-{
- struct s_drive_stuff *stuffp;
- struct request *req;
-
- again:
-
- req = elv_next_request(q);
- if (!req)
- return;
-
- stuffp = req->rq_disk->private_data;
-
- if (!stuffp->present) {
- xwarn("do_request(): bad device: %s\n",req->rq_disk->disk_name);
- xtrace(REQUEST, "end_request(0): bad device\n");
- end_request(req, 0);
- return;
- }
-
- if (stuffp->audio) {
- xwarn("do_request() attempt to read from audio cd\n");
- xtrace(REQUEST, "end_request(0): read from audio\n");
- end_request(req, 0);
- return;
- }
-
- xtrace(REQUEST, "do_request() (%lu + %lu)\n",
- req->sector, req->nr_sectors);
-
- if (rq_data_dir(req) != READ) {
- xwarn("do_request(): non-read command to cd!!\n");
- xtrace(REQUEST, "end_request(0): write\n");
- end_request(req, 0);
- return;
- }
- else {
- stuffp->status = 0;
- while (req->nr_sectors) {
- int i;
-
- i = mcdx_transfer(stuffp,
- req->buffer,
- req->sector,
- req->nr_sectors);
-
- if (i == -1) {
- end_request(req, 0);
- goto again;
- }
- req->sector += i;
- req->nr_sectors -= i;
- req->buffer += (i * 512);
- }
- end_request(req, 1);
- goto again;
-
- xtrace(REQUEST, "end_request(1)\n");
- end_request(req, 1);
- }
-
- goto again;
-}
-
-static int mcdx_open(struct cdrom_device_info *cdi, int purpose)
-{
- struct s_drive_stuff *stuffp;
- xtrace(OPENCLOSE, "open()\n");
- stuffp = cdi->handle;
- if (!stuffp->present)
- return -ENXIO;
-
- /* Make the modules looking used ... (thanx bjorn).
- * But we shouldn't forget to decrement the module counter
- * on error return */
-
- /* this is only done to test if the drive talks with us */
- if (-1 == mcdx_getstatus(stuffp, 1))
- return -EIO;
-
- if (stuffp->xxx) {
-
- xtrace(OPENCLOSE, "open() media changed\n");
- stuffp->audiostatus = CDROM_AUDIO_INVALID;
- stuffp->readcmd = 0;
- xtrace(OPENCLOSE, "open() Request multisession info\n");
- if (-1 ==
- mcdx_requestmultidiskinfo(stuffp, &stuffp->multi, 6))
- xinfo("No multidiskinfo\n");
- } else {
- /* multisession ? */
- if (!stuffp->multi.multi)
- stuffp->multi.msf_last.second = 2;
-
- xtrace(OPENCLOSE, "open() MS: %d, last @ %02x:%02x.%02x\n",
- stuffp->multi.multi,
- stuffp->multi.msf_last.minute,
- stuffp->multi.msf_last.second,
- stuffp->multi.msf_last.frame);
-
- {;
- } /* got multisession information */
- /* request the disks table of contents (aka diskinfo) */
- if (-1 == mcdx_requesttocdata(stuffp, &stuffp->di, 1)) {
-
- stuffp->lastsector = -1;
-
- } else {
-
- stuffp->lastsector = (CD_FRAMESIZE / 512)
- * msf2log(&stuffp->di.msf_leadout) - 1;
-
- xtrace(OPENCLOSE,
- "open() start %d (%02x:%02x.%02x) %d\n",
- stuffp->di.n_first,
- stuffp->di.msf_first.minute,
- stuffp->di.msf_first.second,
- stuffp->di.msf_first.frame,
- msf2log(&stuffp->di.msf_first));
- xtrace(OPENCLOSE,
- "open() last %d (%02x:%02x.%02x) %d\n",
- stuffp->di.n_last,
- stuffp->di.msf_leadout.minute,
- stuffp->di.msf_leadout.second,
- stuffp->di.msf_leadout.frame,
- msf2log(&stuffp->di.msf_leadout));
- }
-
- if (stuffp->toc) {
- xtrace(MALLOC, "open() free old toc @ %p\n",
- stuffp->toc);
- kfree(stuffp->toc);
-
- stuffp->toc = NULL;
- }
-
- xtrace(OPENCLOSE, "open() init irq generation\n");
- if (-1 == mcdx_config(stuffp, 1))
- return -EIO;
-#ifdef FALLBACK
- /* Set the read speed */
- xwarn("AAA %x AAA\n", stuffp->readcmd);
- if (stuffp->readerrs)
- stuffp->readcmd = READ1X;
- else
- stuffp->readcmd =
- stuffp->present | SINGLE ? READ1X : READ2X;
- xwarn("XXX %x XXX\n", stuffp->readcmd);
-#else
- stuffp->readcmd =
- stuffp->present | SINGLE ? READ1X : READ2X;
-#endif
-
- /* try to get the first sector, iff any ... */
- if (stuffp->lastsector >= 0) {
- char buf[512];
- int ans;
- int tries;
-
- stuffp->xa = 0;
- stuffp->audio = 0;
-
- for (tries = 6; tries; tries--) {
-
- stuffp->introk = 1;
-
- xtrace(OPENCLOSE, "open() try as %s\n",
- stuffp->xa ? "XA" : "normal");
- /* set data mode */
- if (-1 == (ans = mcdx_setdatamode(stuffp,
- stuffp->
- xa ?
- MODE2 :
- MODE1,
- 1))) {
- /* return -EIO; */
- stuffp->xa = 0;
- break;
- }
-
- if ((stuffp->audio = e_audio(ans)))
- break;
-
- while (0 ==
- (ans =
- mcdx_transfer(stuffp, buf, 0, 1)));
-
- if (ans == 1)
- break;
- stuffp->xa = !stuffp->xa;
- }
- }
- /* xa disks will be read in raw mode, others not */
- if (-1 == mcdx_setdrivemode(stuffp,
- stuffp->xa ? RAW : COOKED,
- 1))
- return -EIO;
- if (stuffp->audio) {
- xinfo("open() audio disk found\n");
- } else if (stuffp->lastsector >= 0) {
- xinfo("open() %s%s disk found\n",
- stuffp->xa ? "XA / " : "",
- stuffp->multi.
- multi ? "Multi Session" : "Single Session");
- }
- }
- stuffp->xxx = 0;
- stuffp->users++;
- return 0;
-}
-
-static void mcdx_close(struct cdrom_device_info *cdi)
-{
- struct s_drive_stuff *stuffp;
-
- xtrace(OPENCLOSE, "close()\n");
-
- stuffp = cdi->handle;
-
- --stuffp->users;
-}
-
-static int mcdx_media_changed(struct cdrom_device_info *cdi, int disc_nr)
-/* Return: 1 if media changed since last call to this function
- 0 otherwise */
-{
- struct s_drive_stuff *stuffp;
-
- xinfo("mcdx_media_changed called for device %s\n", cdi->name);
-
- stuffp = cdi->handle;
- mcdx_getstatus(stuffp, 1);
-
- if (stuffp->yyy == 0)
- return 0;
-
- stuffp->yyy = 0;
- return 1;
-}
-
-#ifndef MODULE
-static int __init mcdx_setup(char *str)
-{
- int pi[4];
- (void) get_options(str, ARRAY_SIZE(pi), pi);
-
- if (pi[0] > 0)
- mcdx_drive_map[0][0] = pi[1];
- if (pi[0] > 1)
- mcdx_drive_map[0][1] = pi[2];
- return 1;
-}
-
-__setup("mcdx=", mcdx_setup);
-
-#endif
-
-/* DIRTY PART ******************************************************/
-
-static void mcdx_delay(struct s_drive_stuff *stuff, long jifs)
-/* This routine is used for sleeping.
- * A jifs value <0 means NO sleeping,
- * =0 means minimal sleeping (let the kernel
- * run for other processes)
- * >0 means at least sleep for that amount.
- * May be we could use a simple count loop w/ jumps to itself, but
- * I wanna make this independent of cpu speed. [1 jiffy is 1/HZ] sec */
-{
- if (jifs < 0)
- return;
-
- xtrace(SLEEP, "*** delay: sleepq\n");
- interruptible_sleep_on_timeout(&stuff->sleepq, jifs);
- xtrace(SLEEP, "delay awoken\n");
- if (signal_pending(current)) {
- xtrace(SLEEP, "got signal\n");
- }
-}
-
-static irqreturn_t mcdx_intr(int irq, void *dev_id)
-{
- struct s_drive_stuff *stuffp = dev_id;
- unsigned char b;
-
-#ifdef AK2
- if (!stuffp->busy && stuffp->pending)
- stuffp->int_err = 1;
-
-#endif /* AK2 */
- /* get the interrupt status */
- b = inb(stuffp->rreg_status);
- stuffp->introk = ~b & MCDX_RBIT_DTEN;
-
- /* NOTE: We only should get interrupts if the data we
- * requested are ready to transfer.
- * But the drive seems to generate ``asynchronous'' interrupts
- * on several error conditions too. (Despite the err int enable
- * setting during initialisation) */
-
- /* if not ok, read the next byte as the drives status */
- if (!stuffp->introk) {
- xtrace(IRQ, "intr() irq %d hw status 0x%02x\n", irq, b);
- if (~b & MCDX_RBIT_STEN) {
- xinfo("intr() irq %d status 0x%02x\n",
- irq, inb(stuffp->rreg_data));
- } else {
- xinfo("intr() irq %d ambiguous hw status\n", irq);
- }
- } else {
- xtrace(IRQ, "irq() irq %d ok, status %02x\n", irq, b);
- }
-
- stuffp->busy = 0;
- wake_up_interruptible(&stuffp->busyq);
- return IRQ_HANDLED;
-}
-
-
-static int mcdx_talk(struct s_drive_stuff *stuffp,
- const unsigned char *cmd, size_t cmdlen,
- void *buffer, size_t size, unsigned int timeout, int tries)
-/* Send a command to the drive, wait for the result.
- * returns -1 on timeout, drive status otherwise
- * If buffer is not zero, the result (length size) is stored there.
- * If buffer is zero the size should be the number of bytes to read
- * from the drive. These bytes are discarded.
- */
-{
- int st;
- char c;
- int discard;
-
- /* Somebody wants the data read? */
- if ((discard = (buffer == NULL)))
- buffer = &c;
-
- while (stuffp->lock) {
- xtrace(SLEEP, "*** talk: lockq\n");
- interruptible_sleep_on(&stuffp->lockq);
- xtrace(SLEEP, "talk: awoken\n");
- }
-
- stuffp->lock = 1;
-
- /* An operation other then reading data destroys the
- * data already requested and remembered in stuffp->request, ... */
- stuffp->valid = 0;
-
-#if MCDX_DEBUG & TALK
- {
- unsigned char i;
- xtrace(TALK,
- "talk() %d / %d tries, res.size %d, command 0x%02x",
- tries, timeout, size, (unsigned char) cmd[0]);
- for (i = 1; i < cmdlen; i++)
- xtrace(TALK, " 0x%02x", cmd[i]);
- xtrace(TALK, "\n");
- }
-#endif
-
- /* give up if all tries are done (bad) or if the status
- * st != -1 (good) */
- for (st = -1; st == -1 && tries; tries--) {
-
- char *bp = (char *) buffer;
- size_t sz = size;
-
- outsb(stuffp->wreg_data, cmd, cmdlen);
- xtrace(TALK, "talk() command sent\n");
-
- /* get the status byte */
- if (-1 == mcdx_getval(stuffp, timeout, 0, bp)) {
- xinfo("talk() %02x timed out (status), %d tr%s left\n",
- cmd[0], tries - 1, tries == 2 ? "y" : "ies");
- continue;
- }
- st = *bp;
- sz--;
- if (!discard)
- bp++;
-
- xtrace(TALK, "talk() got status 0x%02x\n", st);
-
- /* command error? */
- if (e_cmderr(st)) {
- xwarn("command error cmd = %02x %s \n",
- cmd[0], cmdlen > 1 ? "..." : "");
- st = -1;
- continue;
- }
-
- /* audio status? */
- if (stuffp->audiostatus == CDROM_AUDIO_INVALID)
- stuffp->audiostatus =
- e_audiobusy(st) ? CDROM_AUDIO_PLAY :
- CDROM_AUDIO_NO_STATUS;
- else if (stuffp->audiostatus == CDROM_AUDIO_PLAY
- && e_audiobusy(st) == 0)
- stuffp->audiostatus = CDROM_AUDIO_COMPLETED;
-
- /* media change? */
- if (e_changed(st)) {
- xinfo("talk() media changed\n");
- stuffp->xxx = stuffp->yyy = 1;
- }
-
- /* now actually get the data */
- while (sz--) {
- if (-1 == mcdx_getval(stuffp, timeout, 0, bp)) {
- xinfo("talk() %02x timed out (data), %d tr%s left\n",
- cmd[0], tries - 1,
- tries == 2 ? "y" : "ies");
- st = -1;
- break;
- }
- if (!discard)
- bp++;
- xtrace(TALK, "talk() got 0x%02x\n", *(bp - 1));
- }
- }
-
-#if !MCDX_QUIET
- if (!tries && st == -1)
- xinfo("talk() giving up\n");
-#endif
-
- stuffp->lock = 0;
- wake_up_interruptible(&stuffp->lockq);
-
- xtrace(TALK, "talk() done with 0x%02x\n", st);
- return st;
-}
-
-/* MODULE STUFF ***********************************************************/
-
-static int __init __mcdx_init(void)
-{
- int i;
- int drives = 0;
-
- mcdx_init();
- for (i = 0; i < MCDX_NDRIVES; i++) {
- if (mcdx_stuffp[i]) {
- xtrace(INIT, "init_module() drive %d stuff @ %p\n",
- i, mcdx_stuffp[i]);
- drives++;
- }
- }
-
- if (!drives)
- return -EIO;
-
- return 0;
-}
-
-static void __exit mcdx_exit(void)
-{
- int i;
-
- xinfo("cleanup_module called\n");
-
- for (i = 0; i < MCDX_NDRIVES; i++) {
- struct s_drive_stuff *stuffp = mcdx_stuffp[i];
- if (!stuffp)
- continue;
- del_gendisk(stuffp->disk);
- if (unregister_cdrom(&stuffp->info)) {
- printk(KERN_WARNING "Can't unregister cdrom mcdx\n");
- continue;
- }
- put_disk(stuffp->disk);
- release_region(stuffp->wreg_data, MCDX_IO_SIZE);
- free_irq(stuffp->irq, NULL);
- if (stuffp->toc) {
- xtrace(MALLOC, "cleanup_module() free toc @ %p\n",
- stuffp->toc);
- kfree(stuffp->toc);
- }
- xtrace(MALLOC, "cleanup_module() free stuffp @ %p\n",
- stuffp);
- mcdx_stuffp[i] = NULL;
- kfree(stuffp);
- }
-
- if (unregister_blkdev(MAJOR_NR, "mcdx") != 0) {
- xwarn("cleanup() unregister_blkdev() failed\n");
- }
-#if !MCDX_QUIET
- else
- xinfo("cleanup() succeeded\n");
-#endif
- blk_cleanup_queue(mcdx_queue);
-}
-
-#ifdef MODULE
-module_init(__mcdx_init);
-#endif
-module_exit(mcdx_exit);
-
-
-/* Support functions ************************************************/
-
-static int __init mcdx_init_drive(int drive)
-{
- struct s_version version;
- struct gendisk *disk;
- struct s_drive_stuff *stuffp;
- int size = sizeof(*stuffp);
- char msg[80];
-
- xtrace(INIT, "init() try drive %d\n", drive);
-
- xtrace(INIT, "kmalloc space for stuffpt's\n");
- xtrace(MALLOC, "init() malloc %d bytes\n", size);
- if (!(stuffp = kzalloc(size, GFP_KERNEL))) {
- xwarn("init() malloc failed\n");
- return 1;
- }
-
- disk = alloc_disk(1);
- if (!disk) {
- xwarn("init() malloc failed\n");
- kfree(stuffp);
- return 1;
- }
-
- xtrace(INIT, "init() got %d bytes for drive stuff @ %p\n",
- sizeof(*stuffp), stuffp);
-
- /* set default values */
- stuffp->present = 0; /* this should be 0 already */
- stuffp->toc = NULL; /* this should be NULL already */
-
- /* setup our irq and i/o addresses */
- stuffp->irq = irq(mcdx_drive_map[drive]);
- stuffp->wreg_data = stuffp->rreg_data = port(mcdx_drive_map[drive]);
- stuffp->wreg_reset = stuffp->rreg_status = stuffp->wreg_data + 1;
- stuffp->wreg_hcon = stuffp->wreg_reset + 1;
- stuffp->wreg_chn = stuffp->wreg_hcon + 1;
-
- init_waitqueue_head(&stuffp->busyq);
- init_waitqueue_head(&stuffp->lockq);
- init_waitqueue_head(&stuffp->sleepq);
-
- /* check if i/o addresses are available */
- if (!request_region(stuffp->wreg_data, MCDX_IO_SIZE, "mcdx")) {
- xwarn("0x%03x,%d: Init failed. "
- "I/O ports (0x%03x..0x%03x) already in use.\n",
- stuffp->wreg_data, stuffp->irq,
- stuffp->wreg_data,
- stuffp->wreg_data + MCDX_IO_SIZE - 1);
- xtrace(MALLOC, "init() free stuffp @ %p\n", stuffp);
- kfree(stuffp);
- put_disk(disk);
- xtrace(INIT, "init() continue at next drive\n");
- return 0; /* next drive */
- }
-
- xtrace(INIT, "init() i/o port is available at 0x%03x\n"
- stuffp->wreg_data);
- xtrace(INIT, "init() hardware reset\n");
- mcdx_reset(stuffp, HARD, 1);
-
- xtrace(INIT, "init() get version\n");
- if (-1 == mcdx_requestversion(stuffp, &version, 4)) {
- /* failed, next drive */
- release_region(stuffp->wreg_data, MCDX_IO_SIZE);
- xwarn("%s=0x%03x,%d: Init failed. Can't get version.\n",
- MCDX, stuffp->wreg_data, stuffp->irq);
- xtrace(MALLOC, "init() free stuffp @ %p\n", stuffp);
- kfree(stuffp);
- put_disk(disk);
- xtrace(INIT, "init() continue at next drive\n");
- return 0;
- }
-
- switch (version.code) {
- case 'D':
- stuffp->readcmd = READ2X;
- stuffp->present = DOUBLE | DOOR | MULTI;
- break;
- case 'F':
- stuffp->readcmd = READ1X;
- stuffp->present = SINGLE | DOOR | MULTI;
- break;
- case 'M':
- stuffp->readcmd = READ1X;
- stuffp->present = SINGLE;
- break;
- default:
- stuffp->present = 0;
- break;
- }
-
- stuffp->playcmd = READ1X;
-
- if (!stuffp->present) {
- release_region(stuffp->wreg_data, MCDX_IO_SIZE);
- xwarn("%s=0x%03x,%d: Init failed. No Mitsumi CD-ROM?.\n",
- MCDX, stuffp->wreg_data, stuffp->irq);
- kfree(stuffp);
- put_disk(disk);
- return 0; /* next drive */
- }
-
- xtrace(INIT, "init() register blkdev\n");
- if (register_blkdev(MAJOR_NR, "mcdx")) {
- release_region(stuffp->wreg_data, MCDX_IO_SIZE);
- kfree(stuffp);
- put_disk(disk);
- return 1;
- }
-
- mcdx_queue = blk_init_queue(do_mcdx_request, &mcdx_lock);
- if (!mcdx_queue) {
- unregister_blkdev(MAJOR_NR, "mcdx");
- release_region(stuffp->wreg_data, MCDX_IO_SIZE);
- kfree(stuffp);
- put_disk(disk);
- return 1;
- }
-
- xtrace(INIT, "init() subscribe irq and i/o\n");
- if (request_irq(stuffp->irq, mcdx_intr, IRQF_DISABLED, "mcdx", stuffp)) {
- release_region(stuffp->wreg_data, MCDX_IO_SIZE);
- xwarn("%s=0x%03x,%d: Init failed. Can't get irq (%d).\n",
- MCDX, stuffp->wreg_data, stuffp->irq, stuffp->irq);
- stuffp->irq = 0;
- blk_cleanup_queue(mcdx_queue);
- kfree(stuffp);
- put_disk(disk);
- return 0;
- }
-
- xtrace(INIT, "init() get garbage\n");
- {
- int i;
- mcdx_delay(stuffp, HZ / 2);
- for (i = 100; i; i--)
- (void) inb(stuffp->rreg_status);
- }
-
-
-#ifdef WE_KNOW_WHY
- /* irq 11 -> channel register */
- outb(0x50, stuffp->wreg_chn);
-#endif
-
- xtrace(INIT, "init() set non dma but irq mode\n");
- mcdx_config(stuffp, 1);
-
- stuffp->info.ops = &mcdx_dops;
- stuffp->info.speed = 2;
- stuffp->info.capacity = 1;
- stuffp->info.handle = stuffp;
- sprintf(stuffp->info.name, "mcdx%d", drive);
- disk->major = MAJOR_NR;
- disk->first_minor = drive;
- strcpy(disk->disk_name, stuffp->info.name);
- disk->fops = &mcdx_bdops;
- disk->flags = GENHD_FL_CD;
- stuffp->disk = disk;
-
- sprintf(msg, " mcdx: Mitsumi CD-ROM installed at 0x%03x, irq %d."
- " (Firmware version %c %x)\n",
- stuffp->wreg_data, stuffp->irq, version.code, version.ver);
- mcdx_stuffp[drive] = stuffp;
- xtrace(INIT, "init() mcdx_stuffp[%d] = %p\n", drive, stuffp);
- if (register_cdrom(&stuffp->info) != 0) {
- printk("Cannot register Mitsumi CD-ROM!\n");
- free_irq(stuffp->irq, NULL);
- release_region(stuffp->wreg_data, MCDX_IO_SIZE);
- kfree(stuffp);
- put_disk(disk);
- if (unregister_blkdev(MAJOR_NR, "mcdx") != 0)
- xwarn("cleanup() unregister_blkdev() failed\n");
- blk_cleanup_queue(mcdx_queue);
- return 2;
- }
- disk->private_data = stuffp;
- disk->queue = mcdx_queue;
- add_disk(disk);
- printk(msg);
- return 0;
-}
-
-static int __init mcdx_init(void)
-{
- int drive;
- xwarn("Version 2.14(hs) \n");
-
- xwarn("$Id: mcdx.c,v 1.21 1997/01/26 07:12:59 davem Exp $\n");
-
- /* zero the pointer array */
- for (drive = 0; drive < MCDX_NDRIVES; drive++)
- mcdx_stuffp[drive] = NULL;
-
- /* do the initialisation */
- for (drive = 0; drive < MCDX_NDRIVES; drive++) {
- switch (mcdx_init_drive(drive)) {
- case 2:
- return -EIO;
- case 1:
- break;
- }
- }
- return 0;
-}
-
-static int mcdx_transfer(struct s_drive_stuff *stuffp,
- char *p, int sector, int nr_sectors)
-/* This seems to do the actually transfer. But it does more. It
- keeps track of errors occurred and will (if possible) fall back
- to single speed on error.
- Return: -1 on timeout or other error
- else status byte (as in stuff->st) */
-{
- int ans;
-
- ans = mcdx_xfer(stuffp, p, sector, nr_sectors);
- return ans;
-#ifdef FALLBACK
- if (-1 == ans)
- stuffp->readerrs++;
- else
- return ans;
-
- if (stuffp->readerrs && stuffp->readcmd == READ1X) {
- xwarn("XXX Already reading 1x -- no chance\n");
- return -1;
- }
-
- xwarn("XXX Fallback to 1x\n");
-
- stuffp->readcmd = READ1X;
- return mcdx_transfer(stuffp, p, sector, nr_sectors);
-#endif
-
-}
-
-
-static int mcdx_xfer(struct s_drive_stuff *stuffp,
- char *p, int sector, int nr_sectors)
-/* This does actually the transfer from the drive.
- Return: -1 on timeout or other error
- else status byte (as in stuff->st) */
-{
- int border;
- int done = 0;
- long timeout;
-
- if (stuffp->audio) {
- xwarn("Attempt to read from audio CD.\n");
- return -1;
- }
-
- if (!stuffp->readcmd) {
- xinfo("Can't transfer from missing disk.\n");
- return -1;
- }
-
- while (stuffp->lock) {
- interruptible_sleep_on(&stuffp->lockq);
- }
-
- if (stuffp->valid && (sector >= stuffp->pending)
- && (sector < stuffp->low_border)) {
-
- /* All (or at least a part of the sectors requested) seems
- * to be already requested, so we don't need to bother the
- * drive with new requests ...
- * Wait for the drive become idle, but first
- * check for possible occurred errors --- the drive
- * seems to report them asynchronously */
-
-
- border = stuffp->high_border < (border =
- sector + nr_sectors)
- ? stuffp->high_border : border;
-
- stuffp->lock = current->pid;
-
- do {
-
- while (stuffp->busy) {
-
- timeout =
- interruptible_sleep_on_timeout
- (&stuffp->busyq, 5 * HZ);
-
- if (!stuffp->introk) {
- xtrace(XFER,
- "error via interrupt\n");
- } else if (!timeout) {
- xtrace(XFER, "timeout\n");
- } else if (signal_pending(current)) {
- xtrace(XFER, "signal\n");
- } else
- continue;
-
- stuffp->lock = 0;
- stuffp->busy = 0;
- stuffp->valid = 0;
-
- wake_up_interruptible(&stuffp->lockq);
- xtrace(XFER, "transfer() done (-1)\n");
- return -1;
- }
-
- /* check if we need to set the busy flag (as we
- * expect an interrupt */
- stuffp->busy = (3 == (stuffp->pending & 3));
-
- /* Test if it's the first sector of a block,
- * there we have to skip some bytes as we read raw data */
- if (stuffp->xa && (0 == (stuffp->pending & 3))) {
- const int HEAD =
- CD_FRAMESIZE_RAW - CD_XA_TAIL -
- CD_FRAMESIZE;
- insb(stuffp->rreg_data, p, HEAD);
- }
-
- /* now actually read the data */
- insb(stuffp->rreg_data, p, 512);
-
- /* test if it's the last sector of a block,
- * if so, we have to handle XA special */
- if ((3 == (stuffp->pending & 3)) && stuffp->xa) {
- char dummy[CD_XA_TAIL];
- insb(stuffp->rreg_data, &dummy[0], CD_XA_TAIL);
- }
-
- if (stuffp->pending == sector) {
- p += 512;
- done++;
- sector++;
- }
- } while (++(stuffp->pending) < border);
-
- stuffp->lock = 0;
- wake_up_interruptible(&stuffp->lockq);
-
- } else {
-
- /* The requested sector(s) is/are out of the
- * already requested range, so we have to bother the drive
- * with a new request. */
-
- static unsigned char cmd[] = {
- 0,
- 0, 0, 0,
- 0, 0, 0
- };
-
- cmd[0] = stuffp->readcmd;
-
- /* The numbers held in ->pending, ..., should be valid */
- stuffp->valid = 1;
- stuffp->pending = sector & ~3;
-
- /* do some sanity checks */
- if (stuffp->pending > stuffp->lastsector) {
- xwarn
- ("transfer() sector %d from nirvana requested.\n",
- stuffp->pending);
- stuffp->status = MCDX_ST_EOM;
- stuffp->valid = 0;
- xtrace(XFER, "transfer() done (-1)\n");
- return -1;
- }
-
- if ((stuffp->low_border = stuffp->pending + DIRECT_SIZE)
- > stuffp->lastsector + 1) {
- xtrace(XFER, "cut low_border\n");
- stuffp->low_border = stuffp->lastsector + 1;
- }
- if ((stuffp->high_border = stuffp->pending + REQUEST_SIZE)
- > stuffp->lastsector + 1) {
- xtrace(XFER, "cut high_border\n");
- stuffp->high_border = stuffp->lastsector + 1;
- }
-
- { /* Convert the sector to be requested to MSF format */
- struct cdrom_msf0 pending;
- log2msf(stuffp->pending / 4, &pending);
- cmd[1] = pending.minute;
- cmd[2] = pending.second;
- cmd[3] = pending.frame;
- }
-
- cmd[6] =
- (unsigned
- char) ((stuffp->high_border - stuffp->pending) / 4);
- xtrace(XFER, "[%2d]\n", cmd[6]);
-
- stuffp->busy = 1;
- /* Now really issue the request command */
- outsb(stuffp->wreg_data, cmd, sizeof cmd);
-
- }
-#ifdef AK2
- if (stuffp->int_err) {
- stuffp->valid = 0;
- stuffp->int_err = 0;
- return -1;
- }
-#endif /* AK2 */
-
- stuffp->low_border = (stuffp->low_border +=
- done) <
- stuffp->high_border ? stuffp->low_border : stuffp->high_border;
-
- return done;
-}
-
-
-/* Access to elements of the mcdx_drive_map members */
-
-static unsigned port(int *ip)
-{
- return ip[0];
-}
-static int irq(int *ip)
-{
- return ip[1];
-}
-
-/* Misc number converters */
-
-static unsigned int bcd2uint(unsigned char c)
-{
- return (c >> 4) * 10 + (c & 0x0f);
-}
-
-static unsigned int uint2bcd(unsigned int ival)
-{
- return ((ival / 10) << 4) | (ival % 10);
-}
-
-static void log2msf(unsigned int l, struct cdrom_msf0 *pmsf)
-{
- l += CD_MSF_OFFSET;
- pmsf->minute = uint2bcd(l / 4500), l %= 4500;
- pmsf->second = uint2bcd(l / 75);
- pmsf->frame = uint2bcd(l % 75);
-}
-
-static unsigned int msf2log(const struct cdrom_msf0 *pmsf)
-{
- return bcd2uint(pmsf->frame)
- + bcd2uint(pmsf->second) * 75
- + bcd2uint(pmsf->minute) * 4500 - CD_MSF_OFFSET;
-}
-
-int mcdx_readtoc(struct s_drive_stuff *stuffp)
-/* Read the toc entries from the CD,
- * Return: -1 on failure, else 0 */
-{
-
- if (stuffp->toc) {
- xtrace(READTOC, "ioctl() toc already read\n");
- return 0;
- }
-
- xtrace(READTOC, "ioctl() readtoc for %d tracks\n",
- stuffp->di.n_last - stuffp->di.n_first + 1);
-
- if (-1 == mcdx_hold(stuffp, 1))
- return -1;
-
- xtrace(READTOC, "ioctl() tocmode\n");
- if (-1 == mcdx_setdrivemode(stuffp, TOC, 1))
- return -EIO;
-
- /* all seems to be ok so far ... malloc */
- {
- int size;
- size =
- sizeof(struct s_subqcode) * (stuffp->di.n_last -
- stuffp->di.n_first + 2);
-
- xtrace(MALLOC, "ioctl() malloc %d bytes\n", size);
- stuffp->toc = kmalloc(size, GFP_KERNEL);
- if (!stuffp->toc) {
- xwarn("Cannot malloc %d bytes for toc\n", size);
- mcdx_setdrivemode(stuffp, DATA, 1);
- return -EIO;
- }
- }
-
- /* now read actually the index */
- {
- int trk;
- int retries;
-
- for (trk = 0;
- trk < (stuffp->di.n_last - stuffp->di.n_first + 1);
- trk++)
- stuffp->toc[trk].index = 0;
-
- for (retries = 300; retries; retries--) { /* why 300? */
- struct s_subqcode q;
- unsigned int idx;
-
- if (-1 == mcdx_requestsubqcode(stuffp, &q, 1)) {
- mcdx_setdrivemode(stuffp, DATA, 1);
- return -EIO;
- }
-
- idx = bcd2uint(q.index);
-
- if ((idx > 0)
- && (idx <= stuffp->di.n_last)
- && (q.tno == 0)
- && (stuffp->toc[idx - stuffp->di.n_first].
- index == 0)) {
- stuffp->toc[idx - stuffp->di.n_first] = q;
- xtrace(READTOC,
- "ioctl() toc idx %d (trk %d)\n",
- idx, trk);
- trk--;
- }
- if (trk == 0)
- break;
- }
- memset(&stuffp->
- toc[stuffp->di.n_last - stuffp->di.n_first + 1], 0,
- sizeof(stuffp->toc[0]));
- stuffp->toc[stuffp->di.n_last - stuffp->di.n_first +
- 1].dt = stuffp->di.msf_leadout;
- }
-
- /* unset toc mode */
- xtrace(READTOC, "ioctl() undo toc mode\n");
- if (-1 == mcdx_setdrivemode(stuffp, DATA, 2))
- return -EIO;
-
-#if MCDX_DEBUG && READTOC
- {
- int trk;
- for (trk = 0;
- trk < (stuffp->di.n_last - stuffp->di.n_first + 2);
- trk++)
- xtrace(READTOC, "ioctl() %d readtoc %02x %02x %02x"
- " %02x:%02x.%02x %02x:%02x.%02x\n",
- trk + stuffp->di.n_first,
- stuffp->toc[trk].control,
- stuffp->toc[trk].tno,
- stuffp->toc[trk].index,
- stuffp->toc[trk].tt.minute,
- stuffp->toc[trk].tt.second,
- stuffp->toc[trk].tt.frame,
- stuffp->toc[trk].dt.minute,
- stuffp->toc[trk].dt.second,
- stuffp->toc[trk].dt.frame);
- }
-#endif
-
- return 0;
-}
-
-static int
-mcdx_playmsf(struct s_drive_stuff *stuffp, const struct cdrom_msf *msf)
-{
- unsigned char cmd[7] = {
- 0, 0, 0, 0, 0, 0, 0
- };
-
- if (!stuffp->readcmd) {
- xinfo("Can't play from missing disk.\n");
- return -1;
- }
-
- cmd[0] = stuffp->playcmd;
-
- cmd[1] = msf->cdmsf_min0;
- cmd[2] = msf->cdmsf_sec0;
- cmd[3] = msf->cdmsf_frame0;
- cmd[4] = msf->cdmsf_min1;
- cmd[5] = msf->cdmsf_sec1;
- cmd[6] = msf->cdmsf_frame1;
-
- xtrace(PLAYMSF, "ioctl(): play %x "
- "%02x:%02x:%02x -- %02x:%02x:%02x\n",
- cmd[0], cmd[1], cmd[2], cmd[3], cmd[4], cmd[5], cmd[6]);
-
- outsb(stuffp->wreg_data, cmd, sizeof cmd);
-
- if (-1 == mcdx_getval(stuffp, 3 * HZ, 0, NULL)) {
- xwarn("playmsf() timeout\n");
- return -1;
- }
-
- stuffp->audiostatus = CDROM_AUDIO_PLAY;
- return 0;
-}
-
-static int
-mcdx_playtrk(struct s_drive_stuff *stuffp, const struct cdrom_ti *ti)
-{
- struct s_subqcode *p;
- struct cdrom_msf msf;
-
- if (-1 == mcdx_readtoc(stuffp))
- return -1;
-
- if (ti)
- p = &stuffp->toc[ti->cdti_trk0 - stuffp->di.n_first];
- else
- p = &stuffp->start;
-
- msf.cdmsf_min0 = p->dt.minute;
- msf.cdmsf_sec0 = p->dt.second;
- msf.cdmsf_frame0 = p->dt.frame;
-
- if (ti) {
- p = &stuffp->toc[ti->cdti_trk1 - stuffp->di.n_first + 1];
- stuffp->stop = *p;
- } else
- p = &stuffp->stop;
-
- msf.cdmsf_min1 = p->dt.minute;
- msf.cdmsf_sec1 = p->dt.second;
- msf.cdmsf_frame1 = p->dt.frame;
-
- return mcdx_playmsf(stuffp, &msf);
-}
-
-
-/* Drive functions ************************************************/
-
-static int mcdx_tray_move(struct cdrom_device_info *cdi, int position)
-{
- struct s_drive_stuff *stuffp = cdi->handle;
-
- if (!stuffp->present)
- return -ENXIO;
- if (!(stuffp->present & DOOR))
- return -ENOSYS;
-
- if (position) /* 1: eject */
- return mcdx_talk(stuffp, "\xf6", 1, NULL, 1, 5 * HZ, 3);
- else /* 0: close */
- return mcdx_talk(stuffp, "\xf8", 1, NULL, 1, 5 * HZ, 3);
- return 1;
-}
-
-static int mcdx_stop(struct s_drive_stuff *stuffp, int tries)
-{
- return mcdx_talk(stuffp, "\xf0", 1, NULL, 1, 2 * HZ, tries);
-}
-
-static int mcdx_hold(struct s_drive_stuff *stuffp, int tries)
-{
- return mcdx_talk(stuffp, "\x70", 1, NULL, 1, 2 * HZ, tries);
-}
-
-static int mcdx_requestsubqcode(struct s_drive_stuff *stuffp,
- struct s_subqcode *sub, int tries)
-{
- char buf[11];
- int ans;
-
- if (-1 == (ans = mcdx_talk(stuffp, "\x20", 1, buf, sizeof(buf),
- 2 * HZ, tries)))
- return -1;
- sub->control = buf[1];
- sub->tno = buf[2];
- sub->index = buf[3];
- sub->tt.minute = buf[4];
- sub->tt.second = buf[5];
- sub->tt.frame = buf[6];
- sub->dt.minute = buf[8];
- sub->dt.second = buf[9];
- sub->dt.frame = buf[10];
-
- return ans;
-}
-
-static int mcdx_requestmultidiskinfo(struct s_drive_stuff *stuffp,
- struct s_multi *multi, int tries)
-{
- char buf[5];
- int ans;
-
- if (stuffp->present & MULTI) {
- ans =
- mcdx_talk(stuffp, "\x11", 1, buf, sizeof(buf), 2 * HZ,
- tries);
- multi->multi = buf[1];
- multi->msf_last.minute = buf[2];
- multi->msf_last.second = buf[3];
- multi->msf_last.frame = buf[4];
- return ans;
- } else {
- multi->multi = 0;
- return 0;
- }
-}
-
-static int mcdx_requesttocdata(struct s_drive_stuff *stuffp, struct s_diskinfo *info,
- int tries)
-{
- char buf[9];
- int ans;
- ans =
- mcdx_talk(stuffp, "\x10", 1, buf, sizeof(buf), 2 * HZ, tries);
- if (ans == -1) {
- info->n_first = 0;
- info->n_last = 0;
- } else {
- info->n_first = bcd2uint(buf[1]);
- info->n_last = bcd2uint(buf[2]);
- info->msf_leadout.minute = buf[3];
- info->msf_leadout.second = buf[4];
- info->msf_leadout.frame = buf[5];
- info->msf_first.minute = buf[6];
- info->msf_first.second = buf[7];
- info->msf_first.frame = buf[8];
- }
- return ans;
-}
-
-static int mcdx_setdrivemode(struct s_drive_stuff *stuffp, enum drivemodes mode,
- int tries)
-{
- char cmd[2];
- int ans;
-
- xtrace(HW, "setdrivemode() %d\n", mode);
-
- if (-1 == (ans = mcdx_talk(stuffp, "\xc2", 1, cmd, sizeof(cmd), 5 * HZ, tries)))
- return -1;
-
- switch (mode) {
- case TOC:
- cmd[1] |= 0x04;
- break;
- case DATA:
- cmd[1] &= ~0x04;
- break;
- case RAW:
- cmd[1] |= 0x40;
- break;
- case COOKED:
- cmd[1] &= ~0x40;
- break;
- default:
- break;
- }
- cmd[0] = 0x50;
- return mcdx_talk(stuffp, cmd, 2, NULL, 1, 5 * HZ, tries);
-}
-
-static int mcdx_setdatamode(struct s_drive_stuff *stuffp, enum datamodes mode,
- int tries)
-{
- unsigned char cmd[2] = { 0xa0 };
- xtrace(HW, "setdatamode() %d\n", mode);
- switch (mode) {
- case MODE0:
- cmd[1] = 0x00;
- break;
- case MODE1:
- cmd[1] = 0x01;
- break;
- case MODE2:
- cmd[1] = 0x02;
- break;
- default:
- return -EINVAL;
- }
- return mcdx_talk(stuffp, cmd, 2, NULL, 1, 5 * HZ, tries);
-}
-
-static int mcdx_config(struct s_drive_stuff *stuffp, int tries)
-{
- char cmd[4];
-
- xtrace(HW, "config()\n");
-
- cmd[0] = 0x90;
-
- cmd[1] = 0x10; /* irq enable */
- cmd[2] = 0x05; /* pre, err irq enable */
-
- if (-1 == mcdx_talk(stuffp, cmd, 3, NULL, 1, 1 * HZ, tries))
- return -1;
-
- cmd[1] = 0x02; /* dma select */
- cmd[2] = 0x00; /* no dma */
-
- return mcdx_talk(stuffp, cmd, 3, NULL, 1, 1 * HZ, tries);
-}
-
-static int mcdx_requestversion(struct s_drive_stuff *stuffp, struct s_version *ver,
- int tries)
-{
- char buf[3];
- int ans;
-
- if (-1 == (ans = mcdx_talk(stuffp, "\xdc",
- 1, buf, sizeof(buf), 2 * HZ, tries)))
- return ans;
-
- ver->code = buf[1];
- ver->ver = buf[2];
-
- return ans;
-}
-
-static int mcdx_reset(struct s_drive_stuff *stuffp, enum resetmodes mode, int tries)
-{
- if (mode == HARD) {
- outb(0, stuffp->wreg_chn); /* no dma, no irq -> hardware */
- outb(0, stuffp->wreg_reset); /* hw reset */
- return 0;
- } else
- return mcdx_talk(stuffp, "\x60", 1, NULL, 1, 5 * HZ, tries);
-}
-
-static int mcdx_lockdoor(struct cdrom_device_info *cdi, int lock)
-{
- struct s_drive_stuff *stuffp = cdi->handle;
- char cmd[2] = { 0xfe };
-
- if (!(stuffp->present & DOOR))
- return -ENOSYS;
- if (stuffp->present & DOOR) {
- cmd[1] = lock ? 0x01 : 0x00;
- return mcdx_talk(stuffp, cmd, sizeof(cmd), NULL, 1, 5 * HZ, 3);
- } else
- return 0;
-}
-
-static int mcdx_getstatus(struct s_drive_stuff *stuffp, int tries)
-{
- return mcdx_talk(stuffp, "\x40", 1, NULL, 1, 5 * HZ, tries);
-}
-
-static int
-mcdx_getval(struct s_drive_stuff *stuffp, int to, int delay, char *buf)
-{
- unsigned long timeout = to + jiffies;
- char c;
-
- if (!buf)
- buf = &c;
-
- while (inb(stuffp->rreg_status) & MCDX_RBIT_STEN) {
- if (time_after(jiffies, timeout))
- return -1;
- mcdx_delay(stuffp, delay);
- }
-
- *buf = (unsigned char) inb(stuffp->rreg_data) & 0xff;
-
- return 0;
-}
-
-static int mcdx_setattentuator(struct s_drive_stuff *stuffp,
- struct cdrom_volctrl *vol, int tries)
-{
- char cmd[5];
- cmd[0] = 0xae;
- cmd[1] = vol->channel0;
- cmd[2] = 0;
- cmd[3] = vol->channel1;
- cmd[4] = 0;
-
- return mcdx_talk(stuffp, cmd, sizeof(cmd), NULL, 5, 200, tries);
-}
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(MITSUMI_X_CDROM_MAJOR);
diff --git a/drivers/cdrom/mcdx.h b/drivers/cdrom/mcdx.h
deleted file mode 100644
index 83c364a74dc4..000000000000
--- a/drivers/cdrom/mcdx.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Definitions for the Mitsumi CDROM interface
- * Copyright (C) 1995 1996 Heiko Schlittermann <heiko@lotte.sax.de>
- * VERSION: @VERSION@
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING. If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Thanks to
- * The Linux Community at all and ...
- * Martin Harris (he wrote the first Mitsumi Driver)
- * Eberhard Moenkeberg (he gave me much support and the initial kick)
- * Bernd Huebner, Ruediger Helsch (Unifix-Software Gmbh, they
- * improved the original driver)
- * Jon Tombs, Bjorn Ekwall (module support)
- * Daniel v. Mosnenck (he sent me the Technical and Programming Reference)
- * Gerd Knorr (he lent me his PhotoCD)
- * Nils Faerber and Roger E. Wolff (extensively tested the LU portion)
- * Andreas Kies (testing the mysterious hang up's)
- * ... somebody forgotten?
- * Marcin Dalecki
- *
- */
-
-/*
- * The following lines are for user configuration
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * {0|1} -- 1 if you want the driver detect your drive, may crash and
- * needs a long time to seek. The higher the address the longer the
- * seek.
- *
- * WARNING: AUTOPROBE doesn't work.
- */
-#define MCDX_AUTOPROBE 0
-
-/*
- * Drive specific settings according to the jumpers on the controller
- * board(s).
- * o MCDX_NDRIVES : number of used entries of the following table
- * o MCDX_DRIVEMAP : table of {i/o base, irq} per controller
- *
- * NOTE: I didn't get a drive at irq 9(2) working. Not even alone.
- */
-#if MCDX_AUTOPROBE == 0
- #define MCDX_NDRIVES 1
- #define MCDX_DRIVEMAP { \
- {0x300, 11}, \
- {0x304, 05}, \
- {0x000, 00}, \
- {0x000, 00}, \
- {0x000, 00}, \
- }
-#else
- #error Autoprobing is not implemented yet.
-#endif
-
-#ifndef MCDX_QUIET
-#define MCDX_QUIET 1
-#endif
-
-#ifndef MCDX_DEBUG
-#define MCDX_DEBUG 0
-#endif
-
-/* *** make the following line uncommented, if you're sure,
- * *** all configuration is done */
-/* #define I_WAS_HERE */
-
-/* The name of the device */
-#define MCDX "mcdx"
-
-/* Flags for DEBUGGING */
-#define INIT 0
-#define MALLOC 0
-#define IOCTL 0
-#define PLAYTRK 0
-#define SUBCHNL 0
-#define TOCHDR 0
-#define MS 0
-#define PLAYMSF 0
-#define READTOC 0
-#define OPENCLOSE 0
-#define HW 0
-#define TALK 0
-#define IRQ 0
-#define XFER 0
-#define REQUEST 0
-#define SLEEP 0
-
-/* The following addresses are taken from the Mitsumi Reference
- * and describe the possible i/o range for the controller.
- */
-#define MCDX_IO_BEGIN ((char*) 0x300) /* first base of i/o addr */
-#define MCDX_IO_END ((char*) 0x3fc) /* last base of i/o addr */
-
-/* Per controller 4 bytes i/o are needed. */
-#define MCDX_IO_SIZE 4
-
-/*
- * Bits
- */
-
-/* The status byte, returned from every command, set if
- * the description is true */
-#define MCDX_RBIT_OPEN 0x80 /* door is open */
-#define MCDX_RBIT_DISKSET 0x40 /* disk set (recognised) */
-#define MCDX_RBIT_CHANGED 0x20 /* disk was changed */
-#define MCDX_RBIT_CHECK 0x10 /* disk rotates, servo is on */
-#define MCDX_RBIT_AUDIOTR 0x08 /* current track is audio */
-#define MCDX_RBIT_RDERR 0x04 /* read error, refer SENSE KEY */
-#define MCDX_RBIT_AUDIOBS 0x02 /* currently playing audio */
-#define MCDX_RBIT_CMDERR 0x01 /* command, param or format error */
-
-/* The I/O Register holding the h/w status of the drive,
- * can be read at i/o base + 1 */
-#define MCDX_RBIT_DOOR 0x10 /* door is open */
-#define MCDX_RBIT_STEN 0x04 /* if 0, i/o base contains drive status */
-#define MCDX_RBIT_DTEN 0x02 /* if 0, i/o base contains data */
-
-/*
- * The commands.
- */
-
-#define OPCODE 1 /* offset of opcode */
-#define MCDX_CMD_REQUEST_TOC 1, 0x10
-#define MCDX_CMD_REQUEST_STATUS 1, 0x40
-#define MCDX_CMD_RESET 1, 0x60
-#define MCDX_CMD_REQUEST_DRIVE_MODE 1, 0xc2
-#define MCDX_CMD_SET_INTERLEAVE 2, 0xc8, 0
-#define MCDX_CMD_DATAMODE_SET 2, 0xa0, 0
- #define MCDX_DATAMODE1 0x01
- #define MCDX_DATAMODE2 0x02
-#define MCDX_CMD_LOCK_DOOR 2, 0xfe, 0
-
-#define READ_AHEAD 4 /* 8 Sectors (4K) */
-
-/* Useful macros */
-#define e_door(x) ((x) & MCDX_RBIT_OPEN)
-#define e_check(x) (~(x) & MCDX_RBIT_CHECK)
-#define e_notset(x) (~(x) & MCDX_RBIT_DISKSET)
-#define e_changed(x) ((x) & MCDX_RBIT_CHANGED)
-#define e_audio(x) ((x) & MCDX_RBIT_AUDIOTR)
-#define e_audiobusy(x) ((x) & MCDX_RBIT_AUDIOBS)
-#define e_cmderr(x) ((x) & MCDX_RBIT_CMDERR)
-#define e_readerr(x) ((x) & MCDX_RBIT_RDERR)
-
-/** no drive specific */
-#define MCDX_CDBLK 2048 /* 2048 cooked data each blk */
-
-#define MCDX_DATA_TIMEOUT (HZ/10) /* 0.1 second */
-
-/*
- * Access to the msf array
- */
-#define MSF_MIN 0 /* minute */
-#define MSF_SEC 1 /* second */
-#define MSF_FRM 2 /* frame */
-
-/*
- * Errors
- */
-#define MCDX_E 1 /* unspec error */
-#define MCDX_ST_EOM 0x0100 /* end of media */
-#define MCDX_ST_DRV 0x00ff /* mask to query the drive status */
-
-#ifndef I_WAS_HERE
-#ifndef MODULE
-#warning You have not edited mcdx.h
-#warning Perhaps irq and i/o settings are wrong.
-#endif
-#endif
-
-/* ex:set ts=4 sw=4: */
diff --git a/drivers/cdrom/optcd.c b/drivers/cdrom/optcd.c
deleted file mode 100644
index efd619c0fe10..000000000000
--- a/drivers/cdrom/optcd.c
+++ /dev/null
@@ -1,2105 +0,0 @@
-/* linux/drivers/cdrom/optcd.c - Optics Storage 8000 AT CDROM driver
- $Id: optcd.c,v 1.11 1997/01/26 07:13:00 davem Exp $
-
- Copyright (C) 1995 Leo Spiekman (spiekman@dutette.et.tudelft.nl)
-
-
- Based on Aztech CD268 CDROM driver by Werner Zimmermann and preworks
- by Eberhard Moenkeberg (emoenke@gwdg.de).
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* Revision history
-
-
- 14-5-95 v0.0 Plays sound tracks. No reading of data CDs yet.
- Detection of disk change doesn't work.
- 21-5-95 v0.1 First ALPHA version. CD can be mounted. The
- device major nr is borrowed from the Aztech
- driver. Speed is around 240 kb/s, as measured
- with "time dd if=/dev/cdrom of=/dev/null \
- bs=2048 count=4096".
- 24-6-95 v0.2 Reworked the #defines for the command codes
- and the like, as well as the structure of
- the hardware communication protocol, to
- reflect the "official" documentation, kindly
- supplied by C.K. Tan, Optics Storage Pte. Ltd.
- Also tidied up the state machine somewhat.
- 28-6-95 v0.3 Removed the ISP-16 interface code, as this
- should go into its own driver. The driver now
- has its own major nr.
- Disk change detection now seems to work, too.
- This version became part of the standard
- kernel as of version 1.3.7
- 24-9-95 v0.4 Re-inserted ISP-16 interface code which I
- copied from sjcd.c, with a few changes.
- Updated README.optcd. Submitted for
- inclusion in 1.3.21
- 29-9-95 v0.4a Fixed bug that prevented compilation as module
- 25-10-95 v0.5 Started multisession code. Implementation
- copied from Werner Zimmermann, who copied it
- from Heiko Schlittermann's mcdx.
- 17-1-96 v0.6 Multisession works; some cleanup too.
- 18-4-96 v0.7 Increased some timing constants;
- thanks to Luke McFarlane. Also tidied up some
- printk behaviour. ISP16 initialization
- is now handled by a separate driver.
-
- 09-11-99 Make kernel-parameter implementation work with 2.3.x
- Removed init_module & cleanup_module in favor of
- module_init & module_exit.
- Torben Mathiasen <tmm@image.dk>
-*/
-
-/* Includes */
-
-
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <linux/blkdev.h>
-
-#include <linux/cdrom.h>
-#include "optcd.h"
-
-#include <asm/uaccess.h>
-
-#define MAJOR_NR OPTICS_CDROM_MAJOR
-#define QUEUE (opt_queue)
-#define CURRENT elv_next_request(opt_queue)
-
-
-/* Debug support */
-
-
-/* Don't forget to add new debug flags here. */
-#if DEBUG_DRIVE_IF | DEBUG_VFS | DEBUG_CONV | DEBUG_TOC | \
- DEBUG_BUFFERS | DEBUG_REQUEST | DEBUG_STATE | DEBUG_MULTIS
-#define DEBUG(x) debug x
-static void debug(int debug_this, const char* fmt, ...)
-{
- char s[1024];
- va_list args;
-
- if (!debug_this)
- return;
-
- va_start(args, fmt);
- vsnprintf(s, sizeof(s), fmt, args);
- printk(KERN_DEBUG "optcd: %s\n", s);
- va_end(args);
-}
-#else
-#define DEBUG(x)
-#endif
-
-
-/* Drive hardware/firmware characteristics
- Identifiers in accordance with Optics Storage documentation */
-
-
-#define optcd_port optcd /* Needed for the modutils. */
-static short optcd_port = OPTCD_PORTBASE; /* I/O base of drive. */
-module_param(optcd_port, short, 0);
-/* Drive registers, read */
-#define DATA_PORT optcd_port /* Read data/status */
-#define STATUS_PORT optcd_port+1 /* Indicate data/status availability */
-
-/* Drive registers, write */
-#define COMIN_PORT optcd_port /* For passing command/parameter */
-#define RESET_PORT optcd_port+1 /* Write anything and wait 0.5 sec */
-#define HCON_PORT optcd_port+2 /* Host Xfer Configuration */
-
-
-/* Command completion/status read from DATA register */
-#define ST_DRVERR 0x80
-#define ST_DOOR_OPEN 0x40
-#define ST_MIXEDMODE_DISK 0x20
-#define ST_MODE_BITS 0x1c
-#define ST_M_STOP 0x00
-#define ST_M_READ 0x04
-#define ST_M_AUDIO 0x04
-#define ST_M_PAUSE 0x08
-#define ST_M_INITIAL 0x0c
-#define ST_M_ERROR 0x10
-#define ST_M_OTHERS 0x14
-#define ST_MODE2TRACK 0x02
-#define ST_DSK_CHG 0x01
-#define ST_L_LOCK 0x01
-#define ST_CMD_OK 0x00
-#define ST_OP_OK 0x01
-#define ST_PA_OK 0x02
-#define ST_OP_ERROR 0x05
-#define ST_PA_ERROR 0x06
-
-
-/* Error codes (appear as command completion code from DATA register) */
-/* Player related errors */
-#define ERR_ILLCMD 0x11 /* Illegal command to player module */
-#define ERR_ILLPARM 0x12 /* Illegal parameter to player module */
-#define ERR_SLEDGE 0x13
-#define ERR_FOCUS 0x14
-#define ERR_MOTOR 0x15
-#define ERR_RADIAL 0x16
-#define ERR_PLL 0x17 /* PLL lock error */
-#define ERR_SUB_TIM 0x18 /* Subcode timeout error */
-#define ERR_SUB_NF 0x19 /* Subcode not found error */
-#define ERR_TRAY 0x1a
-#define ERR_TOC 0x1b /* Table of Contents read error */
-#define ERR_JUMP 0x1c
-/* Data errors */
-#define ERR_MODE 0x21
-#define ERR_FORM 0x22
-#define ERR_HEADADDR 0x23 /* Header Address not found */
-#define ERR_CRC 0x24
-#define ERR_ECC 0x25 /* Uncorrectable ECC error */
-#define ERR_CRC_UNC 0x26 /* CRC error and uncorrectable error */
-#define ERR_ILLBSYNC 0x27 /* Illegal block sync error */
-#define ERR_VDST 0x28 /* VDST not found */
-/* Timeout errors */
-#define ERR_READ_TIM 0x31 /* Read timeout error */
-#define ERR_DEC_STP 0x32 /* Decoder stopped */
-#define ERR_DEC_TIM 0x33 /* Decoder interrupt timeout error */
-/* Function abort codes */
-#define ERR_KEY 0x41 /* Key -Detected abort */
-#define ERR_READ_FINISH 0x42 /* Read Finish */
-/* Second Byte diagnostic codes */
-#define ERR_NOBSYNC 0x01 /* No block sync */
-#define ERR_SHORTB 0x02 /* Short block */
-#define ERR_LONGB 0x03 /* Long block */
-#define ERR_SHORTDSP 0x04 /* Short DSP word */
-#define ERR_LONGDSP 0x05 /* Long DSP word */
-
-
-/* Status availability flags read from STATUS register */
-#define FL_EJECT 0x20
-#define FL_WAIT 0x10 /* active low */
-#define FL_EOP 0x08 /* active low */
-#define FL_STEN 0x04 /* Status available when low */
-#define FL_DTEN 0x02 /* Data available when low */
-#define FL_DRQ 0x01 /* active low */
-#define FL_RESET 0xde /* These bits are high after a reset */
-#define FL_STDT (FL_STEN|FL_DTEN)
-
-
-/* Transfer mode, written to HCON register */
-#define HCON_DTS 0x08
-#define HCON_SDRQB 0x04
-#define HCON_LOHI 0x02
-#define HCON_DMA16 0x01
-
-
-/* Drive command set, written to COMIN register */
-/* Quick response commands */
-#define COMDRVST 0x20 /* Drive Status Read */
-#define COMERRST 0x21 /* Error Status Read */
-#define COMIOCTLISTAT 0x22 /* Status Read; reset disk changed bit */
-#define COMINITSINGLE 0x28 /* Initialize Single Speed */
-#define COMINITDOUBLE 0x29 /* Initialize Double Speed */
-#define COMUNLOCK 0x30 /* Unlock */
-#define COMLOCK 0x31 /* Lock */
-#define COMLOCKST 0x32 /* Lock/Unlock Status */
-#define COMVERSION 0x40 /* Get Firmware Revision */
-#define COMVOIDREADMODE 0x50 /* Void Data Read Mode */
-/* Read commands */
-#define COMFETCH 0x60 /* Prefetch Data */
-#define COMREAD 0x61 /* Read */
-#define COMREADRAW 0x62 /* Read Raw Data */
-#define COMREADALL 0x63 /* Read All 2646 Bytes */
-/* Player control commands */
-#define COMLEADIN 0x70 /* Seek To Lead-in */
-#define COMSEEK 0x71 /* Seek */
-#define COMPAUSEON 0x80 /* Pause On */
-#define COMPAUSEOFF 0x81 /* Pause Off */
-#define COMSTOP 0x82 /* Stop */
-#define COMOPEN 0x90 /* Open Tray Door */
-#define COMCLOSE 0x91 /* Close Tray Door */
-#define COMPLAY 0xa0 /* Audio Play */
-#define COMPLAY_TNO 0xa2 /* Audio Play By Track Number */
-#define COMSUBQ 0xb0 /* Read Sub-q Code */
-#define COMLOCATION 0xb1 /* Read Head Position */
-/* Audio control commands */
-#define COMCHCTRL 0xc0 /* Audio Channel Control */
-/* Miscellaneous (test) commands */
-#define COMDRVTEST 0xd0 /* Write Test Bytes */
-#define COMTEST 0xd1 /* Diagnostic Test */
-
-/* Low level drive interface. Only here we do actual I/O
- Waiting for status / data available */
-
-
-/* Busy wait until FLAG goes low. Return 0 on timeout. */
-static inline int flag_low(int flag, unsigned long timeout)
-{
- int flag_high;
- unsigned long count = 0;
-
- while ((flag_high = (inb(STATUS_PORT) & flag)))
- if (++count >= timeout)
- break;
-
- DEBUG((DEBUG_DRIVE_IF, "flag_low 0x%x count %ld%s",
- flag, count, flag_high ? " timeout" : ""));
- return !flag_high;
-}
-
-
-/* Timed waiting for status or data */
-static int sleep_timeout; /* max # of ticks to sleep */
-static DECLARE_WAIT_QUEUE_HEAD(waitq);
-static void sleep_timer(unsigned long data);
-static DEFINE_TIMER(delay_timer, sleep_timer, 0, 0);
-static DEFINE_SPINLOCK(optcd_lock);
-static struct request_queue *opt_queue;
-
-/* Timer routine: wake up when desired flag goes low,
- or when timeout expires. */
-static void sleep_timer(unsigned long data)
-{
- int flags = inb(STATUS_PORT) & FL_STDT;
-
- if (flags == FL_STDT && --sleep_timeout > 0) {
- mod_timer(&delay_timer, jiffies + HZ/100); /* multi-statement macro */
- } else
- wake_up(&waitq);
-}
-
-
-/* Sleep until FLAG goes low. Return 0 on timeout or wrong flag low. */
-static int sleep_flag_low(int flag, unsigned long timeout)
-{
- int flag_high;
-
- DEBUG((DEBUG_DRIVE_IF, "sleep_flag_low"));
-
- sleep_timeout = timeout;
- flag_high = inb(STATUS_PORT) & flag;
- if (flag_high && sleep_timeout > 0) {
- mod_timer(&delay_timer, jiffies + HZ/100);
- sleep_on(&waitq);
- flag_high = inb(STATUS_PORT) & flag;
- }
-
- DEBUG((DEBUG_DRIVE_IF, "flag 0x%x count %ld%s",
- flag, timeout, flag_high ? " timeout" : ""));
- return !flag_high;
-}
-
-/* Low level drive interface. Only here we do actual I/O
- Sending commands and parameters */
-
-
-/* Errors in the command protocol */
-#define ERR_IF_CMD_TIMEOUT 0x100
-#define ERR_IF_ERR_TIMEOUT 0x101
-#define ERR_IF_RESP_TIMEOUT 0x102
-#define ERR_IF_DATA_TIMEOUT 0x103
-#define ERR_IF_NOSTAT 0x104
-
-
-/* Send command code. Return <0 indicates error */
-static int send_cmd(int cmd)
-{
- unsigned char ack;
-
- DEBUG((DEBUG_DRIVE_IF, "sending command 0x%02x\n", cmd));
-
- outb(HCON_DTS, HCON_PORT); /* Enable Suspend Data Transfer */
- outb(cmd, COMIN_PORT); /* Send command code */
- if (!flag_low(FL_STEN, BUSY_TIMEOUT)) /* Wait for status */
- return -ERR_IF_CMD_TIMEOUT;
- ack = inb(DATA_PORT); /* read command acknowledge */
- outb(HCON_SDRQB, HCON_PORT); /* Disable Suspend Data Transfer */
- return ack==ST_OP_OK ? 0 : -ack;
-}
-
-
-/* Send command parameters. Return <0 indicates error */
-static int send_params(struct cdrom_msf *params)
-{
- unsigned char ack;
-
- DEBUG((DEBUG_DRIVE_IF, "sending parameters"
- " %02x:%02x:%02x"
- " %02x:%02x:%02x",
- params->cdmsf_min0,
- params->cdmsf_sec0,
- params->cdmsf_frame0,
- params->cdmsf_min1,
- params->cdmsf_sec1,
- params->cdmsf_frame1));
-
- outb(params->cdmsf_min0, COMIN_PORT);
- outb(params->cdmsf_sec0, COMIN_PORT);
- outb(params->cdmsf_frame0, COMIN_PORT);
- outb(params->cdmsf_min1, COMIN_PORT);
- outb(params->cdmsf_sec1, COMIN_PORT);
- outb(params->cdmsf_frame1, COMIN_PORT);
- if (!flag_low(FL_STEN, BUSY_TIMEOUT)) /* Wait for status */
- return -ERR_IF_CMD_TIMEOUT;
- ack = inb(DATA_PORT); /* read command acknowledge */
- return ack==ST_PA_OK ? 0 : -ack;
-}
-
-
-/* Send parameters for SEEK command. Return <0 indicates error */
-static int send_seek_params(struct cdrom_msf *params)
-{
- unsigned char ack;
-
- DEBUG((DEBUG_DRIVE_IF, "sending seek parameters"
- " %02x:%02x:%02x",
- params->cdmsf_min0,
- params->cdmsf_sec0,
- params->cdmsf_frame0));
-
- outb(params->cdmsf_min0, COMIN_PORT);
- outb(params->cdmsf_sec0, COMIN_PORT);
- outb(params->cdmsf_frame0, COMIN_PORT);
- if (!flag_low(FL_STEN, BUSY_TIMEOUT)) /* Wait for status */
- return -ERR_IF_CMD_TIMEOUT;
- ack = inb(DATA_PORT); /* read command acknowledge */
- return ack==ST_PA_OK ? 0 : -ack;
-}
-
-
-/* Wait for command execution status. Choice between busy waiting
- and sleeping. Return value <0 indicates timeout. */
-static inline int get_exec_status(int busy_waiting)
-{
- unsigned char exec_status;
-
- if (busy_waiting
- ? !flag_low(FL_STEN, BUSY_TIMEOUT)
- : !sleep_flag_low(FL_STEN, SLEEP_TIMEOUT))
- return -ERR_IF_CMD_TIMEOUT;
-
- exec_status = inb(DATA_PORT);
- DEBUG((DEBUG_DRIVE_IF, "returned exec status 0x%02x", exec_status));
- return exec_status;
-}
-
-
-/* Wait busy for extra byte of data that a command returns.
- Return value <0 indicates timeout. */
-static inline int get_data(int short_timeout)
-{
- unsigned char data;
-
- if (!flag_low(FL_STEN, short_timeout ? FAST_TIMEOUT : BUSY_TIMEOUT))
- return -ERR_IF_DATA_TIMEOUT;
-
- data = inb(DATA_PORT);
- DEBUG((DEBUG_DRIVE_IF, "returned data 0x%02x", data));
- return data;
-}
-
-
-/* Returns 0 if failed */
-static int reset_drive(void)
-{
- unsigned long count = 0;
- int flags;
-
- DEBUG((DEBUG_DRIVE_IF, "reset drive"));
-
- outb(0, RESET_PORT);
- while (++count < RESET_WAIT)
- inb(DATA_PORT);
-
- count = 0;
- while ((flags = (inb(STATUS_PORT) & FL_RESET)) != FL_RESET)
- if (++count >= BUSY_TIMEOUT)
- break;
-
- DEBUG((DEBUG_DRIVE_IF, "reset %s",
- flags == FL_RESET ? "succeeded" : "failed"));
-
- if (flags != FL_RESET)
- return 0; /* Reset failed */
- outb(HCON_SDRQB, HCON_PORT); /* Disable Suspend Data Transfer */
- return 1; /* Reset succeeded */
-}
-
-
-/* Facilities for asynchronous operation */
-
-/* Read status/data availability flags FL_STEN and FL_DTEN */
-static inline int stdt_flags(void)
-{
- return inb(STATUS_PORT) & FL_STDT;
-}
-
-
-/* Fetch status that has previously been waited for. <0 means not available */
-static inline int fetch_status(void)
-{
- unsigned char status;
-
- if (inb(STATUS_PORT) & FL_STEN)
- return -ERR_IF_NOSTAT;
-
- status = inb(DATA_PORT);
- DEBUG((DEBUG_DRIVE_IF, "fetched exec status 0x%02x", status));
- return status;
-}
-
-
-/* Fetch data that has previously been waited for. */
-static inline void fetch_data(char *buf, int n)
-{
- insb(DATA_PORT, buf, n);
- DEBUG((DEBUG_DRIVE_IF, "fetched 0x%x bytes", n));
-}
-
-
-/* Flush status and data fifos */
-static inline void flush_data(void)
-{
- while ((inb(STATUS_PORT) & FL_STDT) != FL_STDT)
- inb(DATA_PORT);
- DEBUG((DEBUG_DRIVE_IF, "flushed fifos"));
-}
-
-/* Command protocol */
-
-
-/* Send a simple command and wait for response. Command codes < COMFETCH
- are quick response commands */
-static inline int exec_cmd(int cmd)
-{
- int ack = send_cmd(cmd);
- if (ack < 0)
- return ack;
- return get_exec_status(cmd < COMFETCH);
-}
-
-
-/* Send a command with parameters. Don't wait for the response,
- * which consists of data blocks read from the CD. */
-static inline int exec_read_cmd(int cmd, struct cdrom_msf *params)
-{
- int ack = send_cmd(cmd);
- if (ack < 0)
- return ack;
- return send_params(params);
-}
-
-
-/* Send a seek command with parameters and wait for response */
-static inline int exec_seek_cmd(int cmd, struct cdrom_msf *params)
-{
- int ack = send_cmd(cmd);
- if (ack < 0)
- return ack;
- ack = send_seek_params(params);
- if (ack < 0)
- return ack;
- return 0;
-}
-
-
-/* Send a command with parameters and wait for response */
-static inline int exec_long_cmd(int cmd, struct cdrom_msf *params)
-{
- int ack = exec_read_cmd(cmd, params);
- if (ack < 0)
- return ack;
- return get_exec_status(0);
-}
-
-/* Address conversion routines */
-
-
-/* Binary to BCD (2 digits) */
-static inline void single_bin2bcd(u_char *p)
-{
- DEBUG((DEBUG_CONV, "bin2bcd %02d", *p));
- *p = (*p % 10) | ((*p / 10) << 4);
-}
-
-
-/* Convert entire msf struct */
-static void bin2bcd(struct cdrom_msf *msf)
-{
- single_bin2bcd(&msf->cdmsf_min0);
- single_bin2bcd(&msf->cdmsf_sec0);
- single_bin2bcd(&msf->cdmsf_frame0);
- single_bin2bcd(&msf->cdmsf_min1);
- single_bin2bcd(&msf->cdmsf_sec1);
- single_bin2bcd(&msf->cdmsf_frame1);
-}
-
-
-/* Linear block address to minute, second, frame form */
-#define CD_FPM (CD_SECS * CD_FRAMES) /* frames per minute */
-
-static void lba2msf(int lba, struct cdrom_msf *msf)
-{
- DEBUG((DEBUG_CONV, "lba2msf %d", lba));
- lba += CD_MSF_OFFSET;
- msf->cdmsf_min0 = lba / CD_FPM; lba %= CD_FPM;
- msf->cdmsf_sec0 = lba / CD_FRAMES;
- msf->cdmsf_frame0 = lba % CD_FRAMES;
- msf->cdmsf_min1 = 0;
- msf->cdmsf_sec1 = 0;
- msf->cdmsf_frame1 = 0;
- bin2bcd(msf);
-}
-
-
-/* Two BCD digits to binary */
-static inline u_char bcd2bin(u_char bcd)
-{
- DEBUG((DEBUG_CONV, "bcd2bin %x%02x", bcd));
- return (bcd >> 4) * 10 + (bcd & 0x0f);
-}
-
-
-static void msf2lba(union cdrom_addr *addr)
-{
- addr->lba = addr->msf.minute * CD_FPM
- + addr->msf.second * CD_FRAMES
- + addr->msf.frame - CD_MSF_OFFSET;
-}
-
-
-/* Minute, second, frame address BCD to binary or to linear address,
- depending on MODE */
-static void msf_bcd2bin(union cdrom_addr *addr)
-{
- addr->msf.minute = bcd2bin(addr->msf.minute);
- addr->msf.second = bcd2bin(addr->msf.second);
- addr->msf.frame = bcd2bin(addr->msf.frame);
-}
-
-/* High level drive commands */
-
-
-static int audio_status = CDROM_AUDIO_NO_STATUS;
-static char toc_uptodate = 0;
-static char disk_changed = 1;
-
-/* Get drive status, flagging completion of audio play and disk changes. */
-static int drive_status(void)
-{
- int status;
-
- status = exec_cmd(COMIOCTLISTAT);
- DEBUG((DEBUG_DRIVE_IF, "IOCTLISTAT: %03x", status));
- if (status < 0)
- return status;
- if (status == 0xff) /* No status available */
- return -ERR_IF_NOSTAT;
-
- if (((status & ST_MODE_BITS) != ST_M_AUDIO) &&
- (audio_status == CDROM_AUDIO_PLAY)) {
- audio_status = CDROM_AUDIO_COMPLETED;
- }
-
- if (status & ST_DSK_CHG) {
- toc_uptodate = 0;
- disk_changed = 1;
- audio_status = CDROM_AUDIO_NO_STATUS;
- }
-
- return status;
-}
-
-
-/* Read the current Q-channel info. Also used for reading the
- table of contents. qp->cdsc_format must be set on entry to
- indicate the desired address format */
-static int get_q_channel(struct cdrom_subchnl *qp)
-{
- int status, d1, d2, d3, d4, d5, d6, d7, d8, d9, d10;
-
- status = drive_status();
- if (status < 0)
- return status;
- qp->cdsc_audiostatus = audio_status;
-
- status = exec_cmd(COMSUBQ);
- if (status < 0)
- return status;
-
- d1 = get_data(0);
- if (d1 < 0)
- return d1;
- qp->cdsc_adr = d1;
- qp->cdsc_ctrl = d1 >> 4;
-
- d2 = get_data(0);
- if (d2 < 0)
- return d2;
- qp->cdsc_trk = bcd2bin(d2);
-
- d3 = get_data(0);
- if (d3 < 0)
- return d3;
- qp->cdsc_ind = bcd2bin(d3);
-
- d4 = get_data(0);
- if (d4 < 0)
- return d4;
- qp->cdsc_reladdr.msf.minute = d4;
-
- d5 = get_data(0);
- if (d5 < 0)
- return d5;
- qp->cdsc_reladdr.msf.second = d5;
-
- d6 = get_data(0);
- if (d6 < 0)
- return d6;
- qp->cdsc_reladdr.msf.frame = d6;
-
- d7 = get_data(0);
- if (d7 < 0)
- return d7;
- /* byte not used */
-
- d8 = get_data(0);
- if (d8 < 0)
- return d8;
- qp->cdsc_absaddr.msf.minute = d8;
-
- d9 = get_data(0);
- if (d9 < 0)
- return d9;
- qp->cdsc_absaddr.msf.second = d9;
-
- d10 = get_data(0);
- if (d10 < 0)
- return d10;
- qp->cdsc_absaddr.msf.frame = d10;
-
- DEBUG((DEBUG_TOC, "%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
- d1, d2, d3, d4, d5, d6, d7, d8, d9, d10));
-
- msf_bcd2bin(&qp->cdsc_absaddr);
- msf_bcd2bin(&qp->cdsc_reladdr);
- if (qp->cdsc_format == CDROM_LBA) {
- msf2lba(&qp->cdsc_absaddr);
- msf2lba(&qp->cdsc_reladdr);
- }
-
- return 0;
-}
-
-/* Table of contents handling */
-
-
-/* Errors in table of contents */
-#define ERR_TOC_MISSINGINFO 0x120
-#define ERR_TOC_MISSINGENTRY 0x121
-
-
-struct cdrom_disk_info {
- unsigned char first;
- unsigned char last;
- struct cdrom_msf0 disk_length;
- struct cdrom_msf0 first_track;
- /* Multisession info: */
- unsigned char next;
- struct cdrom_msf0 next_session;
- struct cdrom_msf0 last_session;
- unsigned char multi;
- unsigned char xa;
- unsigned char audio;
-};
-static struct cdrom_disk_info disk_info;
-
-#define MAX_TRACKS 111
-static struct cdrom_subchnl toc[MAX_TRACKS];
-
-#define QINFO_FIRSTTRACK 100 /* bcd2bin(0xa0) */
-#define QINFO_LASTTRACK 101 /* bcd2bin(0xa1) */
-#define QINFO_DISKLENGTH 102 /* bcd2bin(0xa2) */
-#define QINFO_NEXTSESSION 110 /* bcd2bin(0xb0) */
-
-#define I_FIRSTTRACK 0x01
-#define I_LASTTRACK 0x02
-#define I_DISKLENGTH 0x04
-#define I_NEXTSESSION 0x08
-#define I_ALL (I_FIRSTTRACK | I_LASTTRACK | I_DISKLENGTH)
-
-
-#if DEBUG_TOC
-static void toc_debug_info(int i)
-{
- printk(KERN_DEBUG "#%3d ctl %1x, adr %1x, track %2d index %3d"
- " %2d:%02d.%02d %2d:%02d.%02d\n",
- i, toc[i].cdsc_ctrl, toc[i].cdsc_adr,
- toc[i].cdsc_trk, toc[i].cdsc_ind,
- toc[i].cdsc_reladdr.msf.minute,
- toc[i].cdsc_reladdr.msf.second,
- toc[i].cdsc_reladdr.msf.frame,
- toc[i].cdsc_absaddr.msf.minute,
- toc[i].cdsc_absaddr.msf.second,
- toc[i].cdsc_absaddr.msf.frame);
-}
-#endif
-
-
-static int read_toc(void)
-{
- int status, limit, count;
- unsigned char got_info = 0;
- struct cdrom_subchnl q_info;
-#if DEBUG_TOC
- int i;
-#endif
-
- DEBUG((DEBUG_TOC, "starting read_toc"));
-
- count = 0;
- for (limit = 60; limit > 0; limit--) {
- int index;
-
- q_info.cdsc_format = CDROM_MSF;
- status = get_q_channel(&q_info);
- if (status < 0)
- return status;
-
- index = q_info.cdsc_ind;
- if (index > 0 && index < MAX_TRACKS
- && q_info.cdsc_trk == 0 && toc[index].cdsc_ind == 0) {
- toc[index] = q_info;
- DEBUG((DEBUG_TOC, "got %d", index));
- if (index < 100)
- count++;
-
- switch (q_info.cdsc_ind) {
- case QINFO_FIRSTTRACK:
- got_info |= I_FIRSTTRACK;
- break;
- case QINFO_LASTTRACK:
- got_info |= I_LASTTRACK;
- break;
- case QINFO_DISKLENGTH:
- got_info |= I_DISKLENGTH;
- break;
- case QINFO_NEXTSESSION:
- got_info |= I_NEXTSESSION;
- break;
- }
- }
-
- if ((got_info & I_ALL) == I_ALL
- && toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute + count
- >= toc[QINFO_LASTTRACK].cdsc_absaddr.msf.minute + 1)
- break;
- }
-
- /* Construct disk_info from TOC */
- if (disk_info.first == 0) {
- disk_info.first = toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute;
- disk_info.first_track.minute =
- toc[disk_info.first].cdsc_absaddr.msf.minute;
- disk_info.first_track.second =
- toc[disk_info.first].cdsc_absaddr.msf.second;
- disk_info.first_track.frame =
- toc[disk_info.first].cdsc_absaddr.msf.frame;
- }
- disk_info.last = toc[QINFO_LASTTRACK].cdsc_absaddr.msf.minute;
- disk_info.disk_length.minute =
- toc[QINFO_DISKLENGTH].cdsc_absaddr.msf.minute;
- disk_info.disk_length.second =
- toc[QINFO_DISKLENGTH].cdsc_absaddr.msf.second-2;
- disk_info.disk_length.frame =
- toc[QINFO_DISKLENGTH].cdsc_absaddr.msf.frame;
- disk_info.next_session.minute =
- toc[QINFO_NEXTSESSION].cdsc_reladdr.msf.minute;
- disk_info.next_session.second =
- toc[QINFO_NEXTSESSION].cdsc_reladdr.msf.second;
- disk_info.next_session.frame =
- toc[QINFO_NEXTSESSION].cdsc_reladdr.msf.frame;
- disk_info.next = toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute;
- disk_info.last_session.minute =
- toc[disk_info.next].cdsc_absaddr.msf.minute;
- disk_info.last_session.second =
- toc[disk_info.next].cdsc_absaddr.msf.second;
- disk_info.last_session.frame =
- toc[disk_info.next].cdsc_absaddr.msf.frame;
- toc[disk_info.last + 1].cdsc_absaddr.msf.minute =
- disk_info.disk_length.minute;
- toc[disk_info.last + 1].cdsc_absaddr.msf.second =
- disk_info.disk_length.second;
- toc[disk_info.last + 1].cdsc_absaddr.msf.frame =
- disk_info.disk_length.frame;
-#if DEBUG_TOC
- for (i = 1; i <= disk_info.last + 1; i++)
- toc_debug_info(i);
- toc_debug_info(QINFO_FIRSTTRACK);
- toc_debug_info(QINFO_LASTTRACK);
- toc_debug_info(QINFO_DISKLENGTH);
- toc_debug_info(QINFO_NEXTSESSION);
-#endif
-
- DEBUG((DEBUG_TOC, "exiting read_toc, got_info %x, count %d",
- got_info, count));
- if ((got_info & I_ALL) != I_ALL
- || toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute + count
- < toc[QINFO_LASTTRACK].cdsc_absaddr.msf.minute + 1)
- return -ERR_TOC_MISSINGINFO;
- return 0;
-}
-
-
-#ifdef MULTISESSION
-static int get_multi_disk_info(void)
-{
- int sessions, status;
- struct cdrom_msf multi_index;
-
-
- for (sessions = 2; sessions < 10 /* %%for now */; sessions++) {
- int count;
-
- for (count = 100; count < MAX_TRACKS; count++)
- toc[count].cdsc_ind = 0;
-
- multi_index.cdmsf_min0 = disk_info.next_session.minute;
- multi_index.cdmsf_sec0 = disk_info.next_session.second;
- multi_index.cdmsf_frame0 = disk_info.next_session.frame;
- if (multi_index.cdmsf_sec0 >= 20)
- multi_index.cdmsf_sec0 -= 20;
- else {
- multi_index.cdmsf_sec0 += 40;
- multi_index.cdmsf_min0--;
- }
- DEBUG((DEBUG_MULTIS, "Try %d: %2d:%02d.%02d", sessions,
- multi_index.cdmsf_min0,
- multi_index.cdmsf_sec0,
- multi_index.cdmsf_frame0));
- bin2bcd(&multi_index);
- multi_index.cdmsf_min1 = 0;
- multi_index.cdmsf_sec1 = 0;
- multi_index.cdmsf_frame1 = 1;
-
- status = exec_read_cmd(COMREAD, &multi_index);
- if (status < 0) {
- DEBUG((DEBUG_TOC, "exec_read_cmd COMREAD: %02x",
- -status));
- break;
- }
- status = sleep_flag_low(FL_DTEN, MULTI_SEEK_TIMEOUT) ?
- 0 : -ERR_TOC_MISSINGINFO;
- flush_data();
- if (status < 0) {
- DEBUG((DEBUG_TOC, "sleep_flag_low: %02x", -status));
- break;
- }
-
- status = read_toc();
- if (status < 0) {
- DEBUG((DEBUG_TOC, "read_toc: %02x", -status));
- break;
- }
-
- disk_info.multi = 1;
- }
-
- exec_cmd(COMSTOP);
-
- if (status < 0)
- return -EIO;
- return 0;
-}
-#endif /* MULTISESSION */
-
-
-static int update_toc(void)
-{
- int status, count;
-
- if (toc_uptodate)
- return 0;
-
- DEBUG((DEBUG_TOC, "starting update_toc"));
-
- disk_info.first = 0;
- for (count = 0; count < MAX_TRACKS; count++)
- toc[count].cdsc_ind = 0;
-
- status = exec_cmd(COMLEADIN);
- if (status < 0)
- return -EIO;
-
- status = read_toc();
- if (status < 0) {
- DEBUG((DEBUG_TOC, "read_toc: %02x", -status));
- return -EIO;
- }
-
- /* Audio disk detection. Look at first track. */
- disk_info.audio =
- (toc[disk_info.first].cdsc_ctrl & CDROM_DATA_TRACK) ? 0 : 1;
-
- /* XA detection */
- disk_info.xa = drive_status() & ST_MODE2TRACK;
-
- /* Multisession detection: if we want this, define MULTISESSION */
- disk_info.multi = 0;
-#ifdef MULTISESSION
- if (disk_info.xa)
- get_multi_disk_info(); /* Here disk_info.multi is set */
-#endif /* MULTISESSION */
- if (disk_info.multi)
- printk(KERN_WARNING "optcd: Multisession support experimental, "
- "see Documentation/cdrom/optcd\n");
-
- DEBUG((DEBUG_TOC, "exiting update_toc"));
-
- toc_uptodate = 1;
- return 0;
-}
-
-/* Request handling */
-
-static int current_valid(void)
-{
- return CURRENT &&
- rq_data_dir(CURRENT) == READ &&
- CURRENT->sector != -1;
-}
-
-/* Buffers for block size conversion. */
-#define NOBUF -1
-
-static char buf[CD_FRAMESIZE * N_BUFS];
-static volatile int buf_bn[N_BUFS], next_bn;
-static volatile int buf_in = 0, buf_out = NOBUF;
-
-static inline void opt_invalidate_buffers(void)
-{
- int i;
-
- DEBUG((DEBUG_BUFFERS, "executing opt_invalidate_buffers"));
-
- for (i = 0; i < N_BUFS; i++)
- buf_bn[i] = NOBUF;
- buf_out = NOBUF;
-}
-
-
-/* Take care of the different block sizes between cdrom and Linux.
- When Linux gets variable block sizes this will probably go away. */
-static void transfer(void)
-{
-#if DEBUG_BUFFERS | DEBUG_REQUEST
- printk(KERN_DEBUG "optcd: executing transfer\n");
-#endif
-
- if (!current_valid())
- return;
- while (CURRENT -> nr_sectors) {
- int bn = CURRENT -> sector / 4;
- int i, offs, nr_sectors;
- for (i = 0; i < N_BUFS && buf_bn[i] != bn; ++i);
-
- DEBUG((DEBUG_REQUEST, "found %d", i));
-
- if (i >= N_BUFS) {
- buf_out = NOBUF;
- break;
- }
-
- offs = (i * 4 + (CURRENT -> sector & 3)) * 512;
- nr_sectors = 4 - (CURRENT -> sector & 3);
-
- if (buf_out != i) {
- buf_out = i;
- if (buf_bn[i] != bn) {
- buf_out = NOBUF;
- continue;
- }
- }
-
- if (nr_sectors > CURRENT -> nr_sectors)
- nr_sectors = CURRENT -> nr_sectors;
- memcpy(CURRENT -> buffer, buf + offs, nr_sectors * 512);
- CURRENT -> nr_sectors -= nr_sectors;
- CURRENT -> sector += nr_sectors;
- CURRENT -> buffer += nr_sectors * 512;
- }
-}
-
-
-/* State machine for reading disk blocks */
-
-enum state_e {
- S_IDLE, /* 0 */
- S_START, /* 1 */
- S_READ, /* 2 */
- S_DATA, /* 3 */
- S_STOP, /* 4 */
- S_STOPPING /* 5 */
-};
-
-static volatile enum state_e state = S_IDLE;
-#if DEBUG_STATE
-static volatile enum state_e state_old = S_STOP;
-static volatile int flags_old = 0;
-static volatile long state_n = 0;
-#endif
-
-
-/* Used as mutex to keep do_optcd_request (and other processes calling
- ioctl) out while some process is inside a VFS call.
- Reverse is accomplished by checking if state = S_IDLE upon entry
- of opt_ioctl and opt_media_change. */
-static int in_vfs = 0;
-
-
-static volatile int transfer_is_active = 0;
-static volatile int error = 0; /* %% do something with this?? */
-static int tries; /* ibid?? */
-static int timeout = 0;
-
-static void poll(unsigned long data);
-static struct timer_list req_timer = {.function = poll};
-
-
-static void poll(unsigned long data)
-{
- static volatile int read_count = 1;
- int flags;
- int loop_again = 1;
- int status = 0;
- int skip = 0;
-
- if (error) {
- printk(KERN_ERR "optcd: I/O error 0x%02x\n", error);
- opt_invalidate_buffers();
- if (!tries--) {
- printk(KERN_ERR "optcd: read block %d failed;"
- " Giving up\n", next_bn);
- if (transfer_is_active)
- loop_again = 0;
- if (current_valid())
- end_request(CURRENT, 0);
- tries = 5;
- }
- error = 0;
- state = S_STOP;
- }
-
- while (loop_again)
- {
- loop_again = 0; /* each case must flip this back to 1 if we want
- to come back up here */
-
-#if DEBUG_STATE
- if (state == state_old)
- state_n++;
- else {
- state_old = state;
- if (++state_n > 1)
- printk(KERN_DEBUG "optcd: %ld times "
- "in previous state\n", state_n);
- printk(KERN_DEBUG "optcd: state %d\n", state);
- state_n = 0;
- }
-#endif
-
- switch (state) {
- case S_IDLE:
- return;
- case S_START:
- if (in_vfs)
- break;
- if (send_cmd(COMDRVST)) {
- state = S_IDLE;
- while (current_valid())
- end_request(CURRENT, 0);
- return;
- }
- state = S_READ;
- timeout = READ_TIMEOUT;
- break;
- case S_READ: {
- struct cdrom_msf msf;
- if (!skip) {
- status = fetch_status();
- if (status < 0)
- break;
- if (status & ST_DSK_CHG) {
- toc_uptodate = 0;
- opt_invalidate_buffers();
- }
- }
- skip = 0;
- if ((status & ST_DOOR_OPEN) || (status & ST_DRVERR)) {
- toc_uptodate = 0;
- opt_invalidate_buffers();
- printk(KERN_WARNING "optcd: %s\n",
- (status & ST_DOOR_OPEN)
- ? "door open"
- : "disk removed");
- state = S_IDLE;
- while (current_valid())
- end_request(CURRENT, 0);
- return;
- }
- if (!current_valid()) {
- state = S_STOP;
- loop_again = 1;
- break;
- }
- next_bn = CURRENT -> sector / 4;
- lba2msf(next_bn, &msf);
- read_count = N_BUFS;
- msf.cdmsf_frame1 = read_count; /* Not BCD! */
-
- DEBUG((DEBUG_REQUEST, "reading %x:%x.%x %x:%x.%x",
- msf.cdmsf_min0,
- msf.cdmsf_sec0,
- msf.cdmsf_frame0,
- msf.cdmsf_min1,
- msf.cdmsf_sec1,
- msf.cdmsf_frame1));
- DEBUG((DEBUG_REQUEST, "next_bn:%d buf_in:%d"
- " buf_out:%d buf_bn:%d",
- next_bn,
- buf_in,
- buf_out,
- buf_bn[buf_in]));
-
- exec_read_cmd(COMREAD, &msf);
- state = S_DATA;
- timeout = READ_TIMEOUT;
- break;
- }
- case S_DATA:
- flags = stdt_flags() & (FL_STEN|FL_DTEN);
-
-#if DEBUG_STATE
- if (flags != flags_old) {
- flags_old = flags;
- printk(KERN_DEBUG "optcd: flags:%x\n", flags);
- }
- if (flags == FL_STEN)
- printk(KERN_DEBUG "timeout cnt: %d\n", timeout);
-#endif
-
- switch (flags) {
- case FL_DTEN: /* only STEN low */
- if (!tries--) {
- printk(KERN_ERR
- "optcd: read block %d failed; "
- "Giving up\n", next_bn);
- if (transfer_is_active) {
- tries = 0;
- break;
- }
- if (current_valid())
- end_request(CURRENT, 0);
- tries = 5;
- }
- state = S_START;
- timeout = READ_TIMEOUT;
- loop_again = 1;
- case (FL_STEN|FL_DTEN): /* both high */
- break;
- default: /* DTEN low */
- tries = 5;
- if (!current_valid() && buf_in == buf_out) {
- state = S_STOP;
- loop_again = 1;
- break;
- }
- if (read_count<=0)
- printk(KERN_WARNING
- "optcd: warning - try to read"
- " 0 frames\n");
- while (read_count) {
- buf_bn[buf_in] = NOBUF;
- if (!flag_low(FL_DTEN, BUSY_TIMEOUT)) {
- /* should be no waiting here!?? */
- printk(KERN_ERR
- "read_count:%d "
- "CURRENT->nr_sectors:%ld "
- "buf_in:%d\n",
- read_count,
- CURRENT->nr_sectors,
- buf_in);
- printk(KERN_ERR
- "transfer active: %x\n",
- transfer_is_active);
- read_count = 0;
- state = S_STOP;
- loop_again = 1;
- end_request(CURRENT, 0);
- break;
- }
- fetch_data(buf+
- CD_FRAMESIZE*buf_in,
- CD_FRAMESIZE);
- read_count--;
-
- DEBUG((DEBUG_REQUEST,
- "S_DATA; ---I've read data- "
- "read_count: %d",
- read_count));
- DEBUG((DEBUG_REQUEST,
- "next_bn:%d buf_in:%d "
- "buf_out:%d buf_bn:%d",
- next_bn,
- buf_in,
- buf_out,
- buf_bn[buf_in]));
-
- buf_bn[buf_in] = next_bn++;
- if (buf_out == NOBUF)
- buf_out = buf_in;
- buf_in = buf_in + 1 ==
- N_BUFS ? 0 : buf_in + 1;
- }
- if (!transfer_is_active) {
- while (current_valid()) {
- transfer();
- if (CURRENT -> nr_sectors == 0)
- end_request(CURRENT, 1);
- else
- break;
- }
- }
-
- if (current_valid()
- && (CURRENT -> sector / 4 < next_bn ||
- CURRENT -> sector / 4 >
- next_bn + N_BUFS)) {
- state = S_STOP;
- loop_again = 1;
- break;
- }
- timeout = READ_TIMEOUT;
- if (read_count == 0) {
- state = S_STOP;
- loop_again = 1;
- break;
- }
- }
- break;
- case S_STOP:
- if (read_count != 0)
- printk(KERN_ERR
- "optcd: discard data=%x frames\n",
- read_count);
- flush_data();
- if (send_cmd(COMDRVST)) {
- state = S_IDLE;
- while (current_valid())
- end_request(CURRENT, 0);
- return;
- }
- state = S_STOPPING;
- timeout = STOP_TIMEOUT;
- break;
- case S_STOPPING:
- status = fetch_status();
- if (status < 0 && timeout)
- break;
- if ((status >= 0) && (status & ST_DSK_CHG)) {
- toc_uptodate = 0;
- opt_invalidate_buffers();
- }
- if (current_valid()) {
- if (status >= 0) {
- state = S_READ;
- loop_again = 1;
- skip = 1;
- break;
- } else {
- state = S_START;
- timeout = 1;
- }
- } else {
- state = S_IDLE;
- return;
- }
- break;
- default:
- printk(KERN_ERR "optcd: invalid state %d\n", state);
- return;
- } /* case */
- } /* while */
-
- if (!timeout--) {
- printk(KERN_ERR "optcd: timeout in state %d\n", state);
- state = S_STOP;
- if (exec_cmd(COMSTOP) < 0) {
- state = S_IDLE;
- while (current_valid())
- end_request(CURRENT, 0);
- return;
- }
- }
-
- mod_timer(&req_timer, jiffies + HZ/100);
-}
-
-
-static void do_optcd_request(request_queue_t * q)
-{
- DEBUG((DEBUG_REQUEST, "do_optcd_request(%ld+%ld)",
- CURRENT -> sector, CURRENT -> nr_sectors));
-
- if (disk_info.audio) {
- printk(KERN_WARNING "optcd: tried to mount an Audio CD\n");
- end_request(CURRENT, 0);
- return;
- }
-
- transfer_is_active = 1;
- while (current_valid()) {
- transfer(); /* First try to transfer block from buffers */
- if (CURRENT -> nr_sectors == 0) {
- end_request(CURRENT, 1);
- } else { /* Want to read a block not in buffer */
- buf_out = NOBUF;
- if (state == S_IDLE) {
- /* %% Should this block the request queue?? */
- if (update_toc() < 0) {
- while (current_valid())
- end_request(CURRENT, 0);
- break;
- }
- /* Start state machine */
- state = S_START;
- timeout = READ_TIMEOUT;
- tries = 5;
- /* %% why not start right away?? */
- mod_timer(&req_timer, jiffies + HZ/100);
- }
- break;
- }
- }
- transfer_is_active = 0;
-
- DEBUG((DEBUG_REQUEST, "next_bn:%d buf_in:%d buf_out:%d buf_bn:%d",
- next_bn, buf_in, buf_out, buf_bn[buf_in]));
- DEBUG((DEBUG_REQUEST, "do_optcd_request ends"));
-}
-
-/* IOCTLs */
-
-
-static char auto_eject = 0;
-
-static int cdrompause(void)
-{
- int status;
-
- if (audio_status != CDROM_AUDIO_PLAY)
- return -EINVAL;
-
- status = exec_cmd(COMPAUSEON);
- if (status < 0) {
- DEBUG((DEBUG_VFS, "exec_cmd COMPAUSEON: %02x", -status));
- return -EIO;
- }
- audio_status = CDROM_AUDIO_PAUSED;
- return 0;
-}
-
-
-static int cdromresume(void)
-{
- int status;
-
- if (audio_status != CDROM_AUDIO_PAUSED)
- return -EINVAL;
-
- status = exec_cmd(COMPAUSEOFF);
- if (status < 0) {
- DEBUG((DEBUG_VFS, "exec_cmd COMPAUSEOFF: %02x", -status));
- audio_status = CDROM_AUDIO_ERROR;
- return -EIO;
- }
- audio_status = CDROM_AUDIO_PLAY;
- return 0;
-}
-
-
-static int cdromplaymsf(void __user *arg)
-{
- int status;
- struct cdrom_msf msf;
-
- if (copy_from_user(&msf, arg, sizeof msf))
- return -EFAULT;
-
- bin2bcd(&msf);
- status = exec_long_cmd(COMPLAY, &msf);
- if (status < 0) {
- DEBUG((DEBUG_VFS, "exec_long_cmd COMPLAY: %02x", -status));
- audio_status = CDROM_AUDIO_ERROR;
- return -EIO;
- }
-
- audio_status = CDROM_AUDIO_PLAY;
- return 0;
-}
-
-
-static int cdromplaytrkind(void __user *arg)
-{
- int status;
- struct cdrom_ti ti;
- struct cdrom_msf msf;
-
- if (copy_from_user(&ti, arg, sizeof ti))
- return -EFAULT;
-
- if (ti.cdti_trk0 < disk_info.first
- || ti.cdti_trk0 > disk_info.last
- || ti.cdti_trk1 < ti.cdti_trk0)
- return -EINVAL;
- if (ti.cdti_trk1 > disk_info.last)
- ti.cdti_trk1 = disk_info.last;
-
- msf.cdmsf_min0 = toc[ti.cdti_trk0].cdsc_absaddr.msf.minute;
- msf.cdmsf_sec0 = toc[ti.cdti_trk0].cdsc_absaddr.msf.second;
- msf.cdmsf_frame0 = toc[ti.cdti_trk0].cdsc_absaddr.msf.frame;
- msf.cdmsf_min1 = toc[ti.cdti_trk1 + 1].cdsc_absaddr.msf.minute;
- msf.cdmsf_sec1 = toc[ti.cdti_trk1 + 1].cdsc_absaddr.msf.second;
- msf.cdmsf_frame1 = toc[ti.cdti_trk1 + 1].cdsc_absaddr.msf.frame;
-
- DEBUG((DEBUG_VFS, "play %02d:%02d.%02d to %02d:%02d.%02d",
- msf.cdmsf_min0,
- msf.cdmsf_sec0,
- msf.cdmsf_frame0,
- msf.cdmsf_min1,
- msf.cdmsf_sec1,
- msf.cdmsf_frame1));
-
- bin2bcd(&msf);
- status = exec_long_cmd(COMPLAY, &msf);
- if (status < 0) {
- DEBUG((DEBUG_VFS, "exec_long_cmd COMPLAY: %02x", -status));
- audio_status = CDROM_AUDIO_ERROR;
- return -EIO;
- }
-
- audio_status = CDROM_AUDIO_PLAY;
- return 0;
-}
-
-
-static int cdromreadtochdr(void __user *arg)
-{
- struct cdrom_tochdr tochdr;
-
- tochdr.cdth_trk0 = disk_info.first;
- tochdr.cdth_trk1 = disk_info.last;
-
- return copy_to_user(arg, &tochdr, sizeof tochdr) ? -EFAULT : 0;
-}
-
-
-static int cdromreadtocentry(void __user *arg)
-{
- struct cdrom_tocentry entry;
- struct cdrom_subchnl *tocptr;
-
- if (copy_from_user(&entry, arg, sizeof entry))
- return -EFAULT;
-
- if (entry.cdte_track == CDROM_LEADOUT)
- tocptr = &toc[disk_info.last + 1];
- else if (entry.cdte_track > disk_info.last
- || entry.cdte_track < disk_info.first)
- return -EINVAL;
- else
- tocptr = &toc[entry.cdte_track];
-
- entry.cdte_adr = tocptr->cdsc_adr;
- entry.cdte_ctrl = tocptr->cdsc_ctrl;
- entry.cdte_addr.msf.minute = tocptr->cdsc_absaddr.msf.minute;
- entry.cdte_addr.msf.second = tocptr->cdsc_absaddr.msf.second;
- entry.cdte_addr.msf.frame = tocptr->cdsc_absaddr.msf.frame;
- /* %% What should go into entry.cdte_datamode? */
-
- if (entry.cdte_format == CDROM_LBA)
- msf2lba(&entry.cdte_addr);
- else if (entry.cdte_format != CDROM_MSF)
- return -EINVAL;
-
- return copy_to_user(arg, &entry, sizeof entry) ? -EFAULT : 0;
-}
-
-
-static int cdromvolctrl(void __user *arg)
-{
- int status;
- struct cdrom_volctrl volctrl;
- struct cdrom_msf msf;
-
- if (copy_from_user(&volctrl, arg, sizeof volctrl))
- return -EFAULT;
-
- msf.cdmsf_min0 = 0x10;
- msf.cdmsf_sec0 = 0x32;
- msf.cdmsf_frame0 = volctrl.channel0;
- msf.cdmsf_min1 = volctrl.channel1;
- msf.cdmsf_sec1 = volctrl.channel2;
- msf.cdmsf_frame1 = volctrl.channel3;
-
- status = exec_long_cmd(COMCHCTRL, &msf);
- if (status < 0) {
- DEBUG((DEBUG_VFS, "exec_long_cmd COMCHCTRL: %02x", -status));
- return -EIO;
- }
- return 0;
-}
-
-
-static int cdromsubchnl(void __user *arg)
-{
- int status;
- struct cdrom_subchnl subchnl;
-
- if (copy_from_user(&subchnl, arg, sizeof subchnl))
- return -EFAULT;
-
- if (subchnl.cdsc_format != CDROM_LBA
- && subchnl.cdsc_format != CDROM_MSF)
- return -EINVAL;
-
- status = get_q_channel(&subchnl);
- if (status < 0) {
- DEBUG((DEBUG_VFS, "get_q_channel: %02x", -status));
- return -EIO;
- }
-
- if (copy_to_user(arg, &subchnl, sizeof subchnl))
- return -EFAULT;
- return 0;
-}
-
-
-static struct gendisk *optcd_disk;
-
-
-static int cdromread(void __user *arg, int blocksize, int cmd)
-{
- int status;
- struct cdrom_msf msf;
-
- if (copy_from_user(&msf, arg, sizeof msf))
- return -EFAULT;
-
- bin2bcd(&msf);
- msf.cdmsf_min1 = 0;
- msf.cdmsf_sec1 = 0;
- msf.cdmsf_frame1 = 1; /* read only one frame */
- status = exec_read_cmd(cmd, &msf);
-
- DEBUG((DEBUG_VFS, "read cmd status 0x%x", status));
-
- if (!sleep_flag_low(FL_DTEN, SLEEP_TIMEOUT))
- return -EIO;
-
- fetch_data(optcd_disk->private_data, blocksize);
-
- if (copy_to_user(arg, optcd_disk->private_data, blocksize))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int cdromseek(void __user *arg)
-{
- int status;
- struct cdrom_msf msf;
-
- if (copy_from_user(&msf, arg, sizeof msf))
- return -EFAULT;
-
- bin2bcd(&msf);
- status = exec_seek_cmd(COMSEEK, &msf);
-
- DEBUG((DEBUG_VFS, "COMSEEK status 0x%x", status));
-
- if (status < 0)
- return -EIO;
- return 0;
-}
-
-
-#ifdef MULTISESSION
-static int cdrommultisession(void __user *arg)
-{
- struct cdrom_multisession ms;
-
- if (copy_from_user(&ms, arg, sizeof ms))
- return -EFAULT;
-
- ms.addr.msf.minute = disk_info.last_session.minute;
- ms.addr.msf.second = disk_info.last_session.second;
- ms.addr.msf.frame = disk_info.last_session.frame;
-
- if (ms.addr_format != CDROM_LBA
- && ms.addr_format != CDROM_MSF)
- return -EINVAL;
- if (ms.addr_format == CDROM_LBA)
- msf2lba(&ms.addr);
-
- ms.xa_flag = disk_info.xa;
-
- if (copy_to_user(arg, &ms, sizeof(struct cdrom_multisession)))
- return -EFAULT;
-
-#if DEBUG_MULTIS
- if (ms.addr_format == CDROM_MSF)
- printk(KERN_DEBUG
- "optcd: multisession xa:%d, msf:%02d:%02d.%02d\n",
- ms.xa_flag,
- ms.addr.msf.minute,
- ms.addr.msf.second,
- ms.addr.msf.frame);
- else
- printk(KERN_DEBUG
- "optcd: multisession %d, lba:0x%08x [%02d:%02d.%02d])\n",
- ms.xa_flag,
- ms.addr.lba,
- disk_info.last_session.minute,
- disk_info.last_session.second,
- disk_info.last_session.frame);
-#endif /* DEBUG_MULTIS */
-
- return 0;
-}
-#endif /* MULTISESSION */
-
-
-static int cdromreset(void)
-{
- if (state != S_IDLE) {
- error = 1;
- tries = 0;
- }
-
- toc_uptodate = 0;
- disk_changed = 1;
- opt_invalidate_buffers();
- audio_status = CDROM_AUDIO_NO_STATUS;
-
- if (!reset_drive())
- return -EIO;
- return 0;
-}
-
-/* VFS calls */
-
-
-static int opt_ioctl(struct inode *ip, struct file *fp,
- unsigned int cmd, unsigned long arg)
-{
- int status, err, retval = 0;
- void __user *argp = (void __user *)arg;
-
- DEBUG((DEBUG_VFS, "starting opt_ioctl"));
-
- if (!ip)
- return -EINVAL;
-
- if (cmd == CDROMRESET)
- return cdromreset();
-
- /* is do_optcd_request or another ioctl busy? */
- if (state != S_IDLE || in_vfs)
- return -EBUSY;
-
- in_vfs = 1;
-
- status = drive_status();
- if (status < 0) {
- DEBUG((DEBUG_VFS, "drive_status: %02x", -status));
- in_vfs = 0;
- return -EIO;
- }
-
- if (status & ST_DOOR_OPEN)
- switch (cmd) { /* Actions that can be taken with door open */
- case CDROMCLOSETRAY:
- /* We do this before trying to read the toc. */
- err = exec_cmd(COMCLOSE);
- if (err < 0) {
- DEBUG((DEBUG_VFS,
- "exec_cmd COMCLOSE: %02x", -err));
- in_vfs = 0;
- return -EIO;
- }
- break;
- default: in_vfs = 0;
- return -EBUSY;
- }
-
- err = update_toc();
- if (err < 0) {
- DEBUG((DEBUG_VFS, "update_toc: %02x", -err));
- in_vfs = 0;
- return -EIO;
- }
-
- DEBUG((DEBUG_VFS, "ioctl cmd 0x%x", cmd));
-
- switch (cmd) {
- case CDROMPAUSE: retval = cdrompause(); break;
- case CDROMRESUME: retval = cdromresume(); break;
- case CDROMPLAYMSF: retval = cdromplaymsf(argp); break;
- case CDROMPLAYTRKIND: retval = cdromplaytrkind(argp); break;
- case CDROMREADTOCHDR: retval = cdromreadtochdr(argp); break;
- case CDROMREADTOCENTRY: retval = cdromreadtocentry(argp); break;
-
- case CDROMSTOP: err = exec_cmd(COMSTOP);
- if (err < 0) {
- DEBUG((DEBUG_VFS,
- "exec_cmd COMSTOP: %02x",
- -err));
- retval = -EIO;
- } else
- audio_status = CDROM_AUDIO_NO_STATUS;
- break;
- case CDROMSTART: break; /* This is a no-op */
- case CDROMEJECT: err = exec_cmd(COMUNLOCK);
- if (err < 0) {
- DEBUG((DEBUG_VFS,
- "exec_cmd COMUNLOCK: %02x",
- -err));
- retval = -EIO;
- break;
- }
- err = exec_cmd(COMOPEN);
- if (err < 0) {
- DEBUG((DEBUG_VFS,
- "exec_cmd COMOPEN: %02x",
- -err));
- retval = -EIO;
- }
- break;
-
- case CDROMVOLCTRL: retval = cdromvolctrl(argp); break;
- case CDROMSUBCHNL: retval = cdromsubchnl(argp); break;
-
- /* The drive detects the mode and automatically delivers the
- correct 2048 bytes, so we don't need these IOCTLs */
- case CDROMREADMODE2: retval = -EINVAL; break;
- case CDROMREADMODE1: retval = -EINVAL; break;
-
- /* Drive doesn't support reading audio */
- case CDROMREADAUDIO: retval = -EINVAL; break;
-
- case CDROMEJECT_SW: auto_eject = (char) arg;
- break;
-
-#ifdef MULTISESSION
- case CDROMMULTISESSION: retval = cdrommultisession(argp); break;
-#endif
-
- case CDROM_GET_MCN: retval = -EINVAL; break; /* not implemented */
- case CDROMVOLREAD: retval = -EINVAL; break; /* not implemented */
-
- case CDROMREADRAW:
- /* this drive delivers 2340 bytes in raw mode */
- retval = cdromread(argp, CD_FRAMESIZE_RAW1, COMREADRAW);
- break;
- case CDROMREADCOOKED:
- retval = cdromread(argp, CD_FRAMESIZE, COMREAD);
- break;
- case CDROMREADALL:
- retval = cdromread(argp, CD_FRAMESIZE_RAWER, COMREADALL);
- break;
-
- case CDROMSEEK: retval = cdromseek(argp); break;
- case CDROMPLAYBLK: retval = -EINVAL; break; /* not implemented */
- case CDROMCLOSETRAY: break; /* The action was taken earlier */
- default: retval = -EINVAL;
- }
- in_vfs = 0;
- return retval;
-}
-
-
-static int open_count = 0;
-
-/* Open device special file; check that a disk is in. */
-static int opt_open(struct inode *ip, struct file *fp)
-{
- DEBUG((DEBUG_VFS, "starting opt_open"));
-
- if (!open_count && state == S_IDLE) {
- int status;
- char *buf;
-
- buf = kmalloc(CD_FRAMESIZE_RAWER, GFP_KERNEL);
- if (!buf) {
- printk(KERN_INFO "optcd: cannot allocate read buffer\n");
- return -ENOMEM;
- }
- optcd_disk->private_data = buf; /* save read buffer */
-
- toc_uptodate = 0;
- opt_invalidate_buffers();
-
- status = exec_cmd(COMCLOSE); /* close door */
- if (status < 0) {
- DEBUG((DEBUG_VFS, "exec_cmd COMCLOSE: %02x", -status));
- }
-
- status = drive_status();
- if (status < 0) {
- DEBUG((DEBUG_VFS, "drive_status: %02x", -status));
- goto err_out;
- }
- DEBUG((DEBUG_VFS, "status: %02x", status));
- if ((status & ST_DOOR_OPEN) || (status & ST_DRVERR)) {
- printk(KERN_INFO "optcd: no disk or door open\n");
- goto err_out;
- }
- status = exec_cmd(COMLOCK); /* Lock door */
- if (status < 0) {
- DEBUG((DEBUG_VFS, "exec_cmd COMLOCK: %02x", -status));
- }
- status = update_toc(); /* Read table of contents */
- if (status < 0) {
- DEBUG((DEBUG_VFS, "update_toc: %02x", -status));
- status = exec_cmd(COMUNLOCK); /* Unlock door */
- if (status < 0) {
- DEBUG((DEBUG_VFS,
- "exec_cmd COMUNLOCK: %02x", -status));
- }
- goto err_out;
- }
- open_count++;
- }
-
- DEBUG((DEBUG_VFS, "exiting opt_open"));
-
- return 0;
-
-err_out:
- return -EIO;
-}
-
-
-/* Release device special file; flush all blocks from the buffer cache */
-static int opt_release(struct inode *ip, struct file *fp)
-{
- int status;
-
- DEBUG((DEBUG_VFS, "executing opt_release"));
- DEBUG((DEBUG_VFS, "inode: %p, device: %s, file: %p\n",
- ip, ip->i_bdev->bd_disk->disk_name, fp));
-
- if (!--open_count) {
- toc_uptodate = 0;
- opt_invalidate_buffers();
- status = exec_cmd(COMUNLOCK); /* Unlock door */
- if (status < 0) {
- DEBUG((DEBUG_VFS, "exec_cmd COMUNLOCK: %02x", -status));
- }
- if (auto_eject) {
- status = exec_cmd(COMOPEN);
- DEBUG((DEBUG_VFS, "exec_cmd COMOPEN: %02x", -status));
- }
- kfree(optcd_disk->private_data);
- del_timer(&delay_timer);
- del_timer(&req_timer);
- }
- return 0;
-}
-
-
-/* Check if disk has been changed */
-static int opt_media_change(struct gendisk *disk)
-{
- DEBUG((DEBUG_VFS, "executing opt_media_change"));
- DEBUG((DEBUG_VFS, "dev: %s; disk_changed = %d\n",
- disk->disk_name, disk_changed));
-
- if (disk_changed) {
- disk_changed = 0;
- return 1;
- }
- return 0;
-}
-
-/* Driver initialisation */
-
-
-/* Returns 1 if a drive is detected with a version string
- starting with "DOLPHIN". Otherwise 0. */
-static int __init version_ok(void)
-{
- char devname[100];
- int count, i, ch, status;
-
- status = exec_cmd(COMVERSION);
- if (status < 0) {
- DEBUG((DEBUG_VFS, "exec_cmd COMVERSION: %02x", -status));
- return 0;
- }
- if ((count = get_data(1)) < 0) {
- DEBUG((DEBUG_VFS, "get_data(1): %02x", -count));
- return 0;
- }
- for (i = 0, ch = -1; count > 0; count--) {
- if ((ch = get_data(1)) < 0) {
- DEBUG((DEBUG_VFS, "get_data(1): %02x", -ch));
- break;
- }
- if (i < 99)
- devname[i++] = ch;
- }
- devname[i] = '\0';
- if (ch < 0)
- return 0;
-
- printk(KERN_INFO "optcd: Device %s detected\n", devname);
- return ((devname[0] == 'D')
- && (devname[1] == 'O')
- && (devname[2] == 'L')
- && (devname[3] == 'P')
- && (devname[4] == 'H')
- && (devname[5] == 'I')
- && (devname[6] == 'N'));
-}
-
-
-static struct block_device_operations opt_fops = {
- .owner = THIS_MODULE,
- .open = opt_open,
- .release = opt_release,
- .ioctl = opt_ioctl,
- .media_changed = opt_media_change,
-};
-
-#ifndef MODULE
-/* Get kernel parameter when used as a kernel driver */
-static int optcd_setup(char *str)
-{
- int ints[4];
- (void)get_options(str, ARRAY_SIZE(ints), ints);
-
- if (ints[0] > 0)
- optcd_port = ints[1];
-
- return 1;
-}
-
-__setup("optcd=", optcd_setup);
-
-#endif /* MODULE */
-
-/* Test for presence of drive and initialize it. Called at boot time
- or during module initialisation. */
-static int __init optcd_init(void)
-{
- int status;
-
- if (optcd_port <= 0) {
- printk(KERN_INFO
- "optcd: no Optics Storage CDROM Initialization\n");
- return -EIO;
- }
- optcd_disk = alloc_disk(1);
- if (!optcd_disk) {
- printk(KERN_ERR "optcd: can't allocate disk\n");
- return -ENOMEM;
- }
- optcd_disk->major = MAJOR_NR;
- optcd_disk->first_minor = 0;
- optcd_disk->fops = &opt_fops;
- sprintf(optcd_disk->disk_name, "optcd");
-
- if (!request_region(optcd_port, 4, "optcd")) {
- printk(KERN_ERR "optcd: conflict, I/O port 0x%x already used\n",
- optcd_port);
- put_disk(optcd_disk);
- return -EIO;
- }
-
- if (!reset_drive()) {
- printk(KERN_ERR "optcd: drive at 0x%x not ready\n", optcd_port);
- release_region(optcd_port, 4);
- put_disk(optcd_disk);
- return -EIO;
- }
- if (!version_ok()) {
- printk(KERN_ERR "optcd: unknown drive detected; aborting\n");
- release_region(optcd_port, 4);
- put_disk(optcd_disk);
- return -EIO;
- }
- status = exec_cmd(COMINITDOUBLE);
- if (status < 0) {
- printk(KERN_ERR "optcd: cannot init double speed mode\n");
- release_region(optcd_port, 4);
- DEBUG((DEBUG_VFS, "exec_cmd COMINITDOUBLE: %02x", -status));
- put_disk(optcd_disk);
- return -EIO;
- }
- if (register_blkdev(MAJOR_NR, "optcd")) {
- release_region(optcd_port, 4);
- put_disk(optcd_disk);
- return -EIO;
- }
-
-
- opt_queue = blk_init_queue(do_optcd_request, &optcd_lock);
- if (!opt_queue) {
- unregister_blkdev(MAJOR_NR, "optcd");
- release_region(optcd_port, 4);
- put_disk(optcd_disk);
- return -ENOMEM;
- }
-
- blk_queue_hardsect_size(opt_queue, 2048);
- optcd_disk->queue = opt_queue;
- add_disk(optcd_disk);
-
- printk(KERN_INFO "optcd: DOLPHIN 8000 AT CDROM at 0x%x\n", optcd_port);
- return 0;
-}
-
-
-static void __exit optcd_exit(void)
-{
- del_gendisk(optcd_disk);
- put_disk(optcd_disk);
- if (unregister_blkdev(MAJOR_NR, "optcd") == -EINVAL) {
- printk(KERN_ERR "optcd: what's that: can't unregister\n");
- return;
- }
- blk_cleanup_queue(opt_queue);
- release_region(optcd_port, 4);
- printk(KERN_INFO "optcd: module released.\n");
-}
-
-module_init(optcd_init);
-module_exit(optcd_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(OPTICS_CDROM_MAJOR);
diff --git a/drivers/cdrom/optcd.h b/drivers/cdrom/optcd.h
deleted file mode 100644
index 1911bb92ee28..000000000000
--- a/drivers/cdrom/optcd.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/include/linux/optcd.h - Optics Storage 8000 AT CDROM driver
- $Id: optcd.h,v 1.2 1996/01/15 18:43:44 root Exp root $
-
- Copyright (C) 1995 Leo Spiekman (spiekman@dutette.et.tudelft.nl)
-
-
- Configuration file for linux/drivers/cdrom/optcd.c
-*/
-
-#ifndef _LINUX_OPTCD_H
-#define _LINUX_OPTCD_H
-
-
-/* I/O base of drive. Drive uses base to base+2.
- This setting can be overridden with the kernel or insmod command
- line option 'optcd=<portbase>'. Use address of 0 to disable driver. */
-#define OPTCD_PORTBASE 0x340
-
-
-/* enable / disable parts of driver by define / undef */
-#define MULTISESSION /* multisession support (ALPHA) */
-
-
-/* Change 0 to 1 to debug various parts of the driver */
-#define DEBUG_DRIVE_IF 0 /* Low level drive interface */
-#define DEBUG_CONV 0 /* Address conversions */
-#define DEBUG_BUFFERS 0 /* Buffering and block size conversion */
-#define DEBUG_REQUEST 0 /* Request mechanism */
-#define DEBUG_STATE 0 /* State machine */
-#define DEBUG_TOC 0 /* Q-channel and Table of Contents */
-#define DEBUG_MULTIS 0 /* Multisession code */
-#define DEBUG_VFS 0 /* VFS interface */
-
-
-/* Don't touch these unless you know what you're doing. */
-
-/* Various timeout loop repetition counts. */
-#define BUSY_TIMEOUT 10000000 /* for busy wait */
-#define FAST_TIMEOUT 100000 /* ibid. for probing */
-#define SLEEP_TIMEOUT 6000 /* for timer wait */
-#define MULTI_SEEK_TIMEOUT 1000 /* for timer wait */
-#define READ_TIMEOUT 6000 /* for poll wait */
-#define STOP_TIMEOUT 2000 /* for poll wait */
-#define RESET_WAIT 5000 /* busy wait at drive reset */
-
-/* # of buffers for block size conversion. 6 is optimal for my setup (P75),
- giving 280 kb/s, with 0.4% CPU usage. Experiment to find your optimal
- setting */
-#define N_BUFS 6
-
-
-#endif /* _LINUX_OPTCD_H */
diff --git a/drivers/cdrom/sbpcd.c b/drivers/cdrom/sbpcd.c
deleted file mode 100644
index a1283b1ef989..000000000000
--- a/drivers/cdrom/sbpcd.c
+++ /dev/null
@@ -1,5966 +0,0 @@
-/*
- * sbpcd.c CD-ROM device driver for the whole family of traditional,
- * non-ATAPI IDE-style Matsushita/Panasonic CR-5xx drives.
- * Works with SoundBlaster compatible cards and with "no-sound"
- * interface cards like Lasermate, Panasonic CI-101P, Teac, ...
- * Also for the Longshine LCS-7260 drive.
- * Also for the IBM "External ISA CD-Rom" drive.
- * Also for the CreativeLabs CD200 drive.
- * Also for the TEAC CD-55A drive.
- * Also for the ECS-AT "Vertos 100" drive.
- * Not for Sanyo drives (but for the H94A, sjcd is there...).
- * Not for any other Funai drives than the CD200 types (sometimes
- * labelled E2550UA or MK4015 or 2800F).
- */
-
-#define VERSION "v4.63 Andrew J. Kroll <ag784@freenet.buffalo.edu> Wed Jul 26 04:24:10 EDT 2000"
-
-/* Copyright (C) 1993, 1994, 1995 Eberhard Moenkeberg <emoenke@gwdg.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * You should have received a copy of the GNU General Public License
- * (for example /usr/src/linux/COPYING); if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * If you change this software, you should mail a .diff file with some
- * description lines to emoenke@gwdg.de. I want to know about it.
- *
- * If you are the editor of a Linux CD, you should enable sbpcd.c within
- * your boot floppy kernel and send me one of your CDs for free.
- *
- * If you would like to port the driver to an other operating system (f.e.
- * FreeBSD or NetBSD) or use it as an information source, you shall not be
- * restricted by the GPL under the following conditions:
- * a) the source code of your work is freely available
- * b) my part of the work gets mentioned at all places where your
- * authorship gets mentioned
- * c) I receive a copy of your code together with a full installation
- * package of your operating system for free.
- *
- *
- * VERSION HISTORY
- *
- * 0.1 initial release, April/May 93, after mcd.c (Martin Harriss)
- *
- * 0.2 thek "repeat:"-loop in do_sbpcd_request did not check for
- * end-of-request_queue (resulting in kernel panic).
- * Flow control seems stable, but throughput is not better.
- *
- * 0.3 interrupt locking totally eliminated (maybe "inb" and "outb"
- * are still locking) - 0.2 made keyboard-type-ahead losses.
- * check_sbpcd_media_change added (to use by isofs/inode.c)
- * - but it detects almost nothing.
- *
- * 0.4 use MAJOR 25 definitely.
- * Almost total re-design to support double-speed drives and
- * "naked" (no sound) interface cards ("LaserMate" interface type).
- * Flow control should be exact now.
- * Don't occupy the SbPro IRQ line (not needed either); will
- * live together with Hannu Savolainen's sndkit now.
- * Speeded up data transfer to 150 kB/sec, with help from Kai
- * Makisara, the "provider" of the "mt" tape utility.
- * Give "SpinUp" command if necessary.
- * First steps to support up to 4 drives (but currently only one).
- * Implemented audio capabilities - workman should work, xcdplayer
- * gives some problems.
- * This version is still consuming too much CPU time, and
- * sleeping still has to be worked on.
- * During "long" implied seeks, it seems possible that a
- * ReadStatus command gets ignored. That gives the message
- * "ResponseStatus timed out" (happens about 6 times here during
- * a "ls -alR" of the YGGDRASIL LGX-Beta CD). Such a case is
- * handled without data error, but it should get done better.
- *
- * 0.5 Free CPU during waits (again with help from Kai Makisara).
- * Made it work together with the LILO/kernel setup standard.
- * Included auto-probing code, as suggested by YGGDRASIL.
- * Formal redesign to add DDI debugging.
- * There are still flaws in IOCTL (workman with double speed drive).
- *
- * 1.0 Added support for all drive IDs (0...3, no longer only 0)
- * and up to 4 drives on one controller.
- * Added "#define MANY_SESSION" for "old" multi session CDs.
- *
- * 1.1 Do SpinUp for new drives, too.
- * Revised for clean compile under "old" kernels (0.99pl9).
- *
- * 1.2 Found the "workman with double-speed drive" bug: use the driver's
- * audio_state, not what the drive is reporting with ReadSubQ.
- *
- * 1.3 Minor cleanups.
- * Refinements regarding Workman.
- *
- * 1.4 Read XA disks (PhotoCDs) with "old" drives, too (but only the first
- * session - no chance to fully access a "multi-session" CD).
- * This currently still is too slow (50 kB/sec) - but possibly
- * the old drives won't do it faster.
- * Implemented "door (un)lock" for new drives (still does not work
- * as wanted - no lock possible after an unlock).
- * Added some debugging printout for the UPC/EAN code - but my drives
- * return only zeroes. Is there no UPC/EAN code written?
- *
- * 1.5 Laborate with UPC/EAN code (not better yet).
- * Adapt to kernel 1.1.8 change (have to explicitly include
- * <linux/string.h> now).
- *
- * 1.6 Trying to read audio frames as data. Impossible with the current
- * drive firmware levels, as it seems. Awaiting any hint. ;-)
- * Changed "door unlock": repeat it until success.
- * Changed CDROMSTOP routine (stop somewhat "softer" so that Workman
- * won't get confused).
- * Added a third interface type: Sequoia S-1000, as used with the SPEA
- * Media FX sound card. This interface (usable for Sony and Mitsumi
- * drives, too) needs a special configuration setup and behaves like a
- * LaserMate type after that. Still experimental - I do not have such
- * an interface.
- * Use the "variable BLOCK_SIZE" feature (2048). But it does only work
- * if you give the mount option "block=2048".
- * The media_check routine is currently disabled; now that it gets
- * called as it should I fear it must get synchronized for not to
- * disturb the normal driver's activity.
- *
- * 2.0 Version number bumped - two reasons:
- * - reading audio tracks as data works now with CR-562 and CR-563. We
- * currently do it by an IOCTL (yet has to get standardized), one frame
- * at a time; that is pretty slow. But it works.
- * - we are maintaining now up to 4 interfaces (each up to 4 drives):
- * did it the easy way - a different MAJOR (25, 26, ...) and a different
- * copy of the driver (sbpcd.c, sbpcd2.c, sbpcd3.c, sbpcd4.c - only
- * distinguished by the value of SBPCD_ISSUE and the driver's name),
- * and a common sbpcd.h file.
- * Bettered the "ReadCapacity error" problem with old CR-52x drives (the
- * drives sometimes need a manual "eject/insert" before work): just
- * reset the drive and do again. Needs lots of resets here and sometimes
- * that does not cure, so this can't be the solution.
- *
- * 2.1 Found bug with multisession CDs (accessing frame 16).
- * "read audio" works now with address type CDROM_MSF, too.
- * Bigger audio frame buffer: allows reading max. 4 frames at time; this
- * gives a significant speedup, but reading more than one frame at once
- * gives missing chunks at each single frame boundary.
- *
- * 2.2 Kernel interface cleanups: timers, init, setup, media check.
- *
- * 2.3 Let "door lock" and "eject" live together.
- * Implemented "close tray" (done automatically during open).
- *
- * 2.4 Use different names for device registering.
- *
- * 2.5 Added "#if EJECT" code (default: enabled) to automatically eject
- * the tray during last call to "sbpcd_release".
- * Added "#if JUKEBOX" code (default: disabled) to automatically eject
- * the tray during call to "sbpcd_open" if no disk is in.
- * Turn on the CD volume of "compatible" sound cards, too; just define
- * SOUND_BASE (in sbpcd.h) accordingly (default: disabled).
- *
- * 2.6 Nothing new.
- *
- * 2.7 Added CDROMEJECT_SW ioctl to set the "EJECT" behavior on the fly:
- * 0 disables, 1 enables auto-ejecting. Useful to keep the tray in
- * during shutdown.
- *
- * 2.8 Added first support (still BETA, I need feedback or a drive) for
- * the Longshine LCS-7260 drives. They appear as double-speed drives
- * using the "old" command scheme, extended by tray control and door
- * lock functions.
- * Found (and fixed preliminary) a flaw with some multisession CDs: we
- * have to re-direct not only the accesses to frame 16 (the isofs
- * routines drive it up to max. 100), but also those to the continuation
- * (repetition) frames (as far as they exist - currently set fix as
- * 16..20).
- * Changed default of the "JUKEBOX" define. If you use this default,
- * your tray will eject if you try to mount without a disk in. Next
- * mount command will insert the tray - so, just fill in a disk. ;-)
- *
- * 2.9 Fulfilled the Longshine LCS-7260 support; with great help and
- * experiments by Serge Robyns.
- * First attempts to support the TEAC CD-55A drives; but still not
- * usable yet.
- * Implemented the CDROMMULTISESSION ioctl; this is an attempt to handle
- * multi session CDs more "transparent" (redirection handling has to be
- * done within the isofs routines, and only for the special purpose of
- * obtaining the "right" volume descriptor; accesses to the raw device
- * should not get redirected).
- *
- * 3.0 Just a "normal" increment, with some provisions to do it better. ;-)
- * Introduced "#define READ_AUDIO" to specify the maximum number of
- * audio frames to grab with one request. This defines a buffer size
- * within kernel space; a value of 0 will reserve no such space and
- * disable the CDROMREADAUDIO ioctl. A value of 75 enables the reading
- * of a whole second with one command, but will use a buffer of more
- * than 172 kB.
- * Started CD200 support. Drive detection should work, but nothing
- * more.
- *
- * 3.1 Working to support the CD200 and the Teac CD-55A drives.
- * AT-BUS style device numbering no longer used: use SCSI style now.
- * So, the first "found" device has MINOR 0, regardless of the
- * jumpered drive ID. This implies modifications to the /dev/sbpcd*
- * entries for some people, but will help the DAU (german TLA, english:
- * "newbie", maybe ;-) to install his "first" system from a CD.
- *
- * 3.2 Still testing with CD200 and CD-55A drives.
- *
- * 3.3 Working with CD200 support.
- *
- * 3.4 Auto-probing stops if an address of 0 is seen (to be entered with
- * the kernel command line).
- * Made the driver "loadable". If used as a module, "audio copy" is
- * disabled, and the internal read ahead data buffer has a reduced size
- * of 4 kB; so, throughput may be reduced a little bit with slow CPUs.
- *
- * 3.5 Provisions to handle weird photoCDs which have an interrupted
- * "formatting" immediately after the last frames of some files: simply
- * never "read ahead" with MultiSession CDs. By this, CPU usage may be
- * increased with those CDs, and there may be a loss in speed.
- * Re-structured the messaging system.
- * The "loadable" version no longer has a limited READ_AUDIO buffer
- * size.
- * Removed "MANY_SESSION" handling for "old" multi session CDs.
- * Added "private" IOCTLs CDROMRESET and CDROMVOLREAD.
- * Started again to support the TEAC CD-55A drives, now that I found
- * the money for "my own" drive. ;-)
- * The TEAC CD-55A support is fairly working now.
- * I have measured that the drive "delivers" at 600 kB/sec (even with
- * bigger requests than the drive's 64 kB buffer can satisfy), but
- * the "real" rate does not exceed 520 kB/sec at the moment.
- * Caused by the various changes to build in TEAC support, the timed
- * loops are de-optimized at the moment (less throughput with CR-52x
- * drives, and the TEAC will give speed only with SBP_BUFFER_FRAMES 64).
- *
- * 3.6 Fixed TEAC data read problems with SbPro interfaces.
- * Initial size of the READ_AUDIO buffer is 0. Can get set to any size
- * during runtime.
- *
- * 3.7 Introduced MAX_DRIVES for some poor interface cards (seen with TEAC
- * drives) which allow only one drive (ID 0); this avoids repetitive
- * detection under IDs 1..3.
- * Elongated cmd_out_T response waiting; necessary for photo CDs with
- * a lot of sessions.
- * Bettered the sbpcd_open() behavior with TEAC drives.
- *
- * 3.8 Elongated max_latency for CR-56x drives.
- *
- * 3.9 Finally fixed the long-known SoundScape/SPEA/Sequoia S-1000 interface
- * configuration bug.
- * Now Corey, Heiko, Ken, Leo, Vadim/Eric & Werner are invited to copy
- * the config_spea() routine into their drivers. ;-)
- *
- * 4.0 No "big step" - normal version increment.
- * Adapted the benefits from 1.3.33.
- * Fiddled with CDROMREADAUDIO flaws.
- * Avoid ReadCapacity command with CD200 drives (the MKE 1.01 version
- * seems not to support it).
- * Fulfilled "read audio" for CD200 drives, with help of Pete Heist
- * (heistp@rpi.edu).
- *
- * 4.1 Use loglevel KERN_INFO with printk().
- * Added support for "Vertos 100" drive ("ECS-AT") - it is very similar
- * to the Longshine LCS-7260. Give feedback if you can - I never saw
- * such a drive, and I have no specs.
- *
- * 4.2 Support for Teac 16-bit interface cards. Can't get auto-detected,
- * so you have to jumper your card to 0x2C0. Still not 100% - come
- * in contact if you can give qualified feedback.
- * Use loglevel KERN_NOTICE with printk(). If you get annoyed by a
- * flood of unwanted messages and the accompanied delay, try to read
- * my documentation. Especially the Linux CDROM drivers have to do an
- * important job for the newcomers, so the "distributed" version has
- * to fit some special needs. Since generations, the flood of messages
- * is user-configurable (even at runtime), but to get aware of this, one
- * needs a special mental quality: the ability to read.
- *
- * 4.3 CD200F does not like to receive a command while the drive is
- * reading the ToC; still trying to solve it.
- * Removed some redundant verify_area calls (yes, Heiko Eissfeldt
- * is visiting all the Linux CDROM drivers ;-).
- *
- * 4.4 Adapted one idea from tiensivu@pilot.msu.edu's "stripping-down"
- * experiments: "KLOGD_PAUSE".
- * Inhibited "play audio" attempts with data CDs. Provisions for a
- * "data-safe" handling of "mixed" (data plus audio) Cds.
- *
- * 4.5 Meanwhile Gonzalo Tornaria <tornaria@cmat.edu.uy> (GTL) built a
- * special end_request routine: we seem to have to take care for not
- * to have two processes working at the request list. My understanding
- * was and is that ll_rw_blk should not call do_sbpcd_request as long
- * as there is still one call active (the first call will care for all
- * outstanding I/Os, and if a second call happens, that is a bug in
- * ll_rw_blk.c).
- * "Check media change" without touching any drive.
- *
- * 4.6 Use a semaphore to synchronize multi-activity; elaborated by Rob
- * Riggs <rriggs@tesser.com>. At the moment, we simply block "read"
- * against "ioctl" and vice versa. This could be refined further, but
- * I guess with almost no performance increase.
- * Experiments to speed up the CD-55A; again with help of Rob Riggs
- * (to be true, he gave both, idea & code. ;-)
- *
- * 4.61 Ported to Uniform CD-ROM driver by
- * Heiko Eissfeldt <heiko@colossus.escape.de> with additional
- * changes by Erik Andersen <andersee@debian.org>
- *
- * 4.62 Fix a bug where playing audio left the drive in an unusable state.
- * Heiko Eissfeldt <heiko@colossus.escape.de>
- *
- * November 1999 -- Make kernel-parameter implementation work with 2.3.x
- * Removed init_module & cleanup_module in favor of
- * module_init & module_exit.
- * Torben Mathiasen <tmm@image.dk>
- *
- * 4.63 Bug fixes for audio annoyances, new legacy CDROM maintainer.
- * Annoying things fixed:
- * TOC reread on automated disk changes
- * TOC reread on manual cd changes
- * Play IOCTL tries to play CD before it's actually ready... sometimes.
- * CD_AUDIO_COMPLETED state so workman (and other playes) can repeat play.
- * Andrew J. Kroll <ag784@freenet.buffalo.edu> Wed Jul 26 04:24:10 EDT 2000
- *
- * 4.64 Fix module parameters - were being completely ignored.
- * Can also specify max_drives=N as a setup int to get rid of
- * "ghost" drives on crap hardware (aren't they all?) Paul Gortmaker
- *
- * TODO
- * implement "read all subchannel data" (96 bytes per frame)
- * remove alot of the virtual status bits and deal with hardware status
- * move the change of cd for audio to a better place
- * add debug levels to insmod parameters (trivial)
- *
- * special thanks to Kai Makisara (kai.makisara@vtt.fi) for his fine
- * elaborated speed-up experiments (and the fabulous results!), for
- * the "push" towards load-free wait loops, and for the extensive mail
- * thread which brought additional hints and bug fixes.
- *
- */
-
-/*
- * Trying to merge requests breaks this driver horribly (as in it goes
- * boom and apparently has done so since 2.3.41). As it is a legacy
- * driver for a horribly slow double speed CD on a hideous interface
- * designed for polled operation, I won't lose any sleep in simply
- * disallowing merging. Paul G. 02/2001
- *
- * Thu May 30 14:14:47 CEST 2002:
- *
- * I have presumably found the reson for the above - there was a bogous
- * end_request substitute, which was manipulating the request queues
- * incorrectly. If someone has access to the actual hardware, and it's
- * still operations - well please free to test it.
- *
- * Marcin Dalecki
- */
-
-/*
- * Add bio/kdev_t changes for 2.5.x required to make it work again.
- * Still room for improvement in the request handling here if anyone
- * actually cares. Bring your own chainsaw. Paul G. 02/2002
- */
-
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <stdarg.h>
-#include "sbpcd.h"
-
-#define MAJOR_NR MATSUSHITA_CDROM_MAJOR
-#include <linux/blkdev.h>
-
-/*==========================================================================*/
-#if SBPCD_DIS_IRQ
-# define SBPCD_CLI cli()
-# define SBPCD_STI sti()
-#else
-# define SBPCD_CLI
-# define SBPCD_STI
-#endif
-
-/*==========================================================================*/
-/*
- * auto-probing address list
- * inspired by Adam J. Richter from Yggdrasil
- *
- * still not good enough - can cause a hang.
- * example: a NE 2000 ethernet card at 300 will cause a hang probing 310.
- * if that happens, reboot and use the LILO (kernel) command line.
- * The possibly conflicting ethernet card addresses get NOT probed
- * by default - to minimize the hang possibilities.
- *
- * The SB Pro addresses get "mirrored" at 0x6xx and some more locations - to
- * avoid a type error, the 0x2xx-addresses must get checked before 0x6xx.
- *
- * send mail to emoenke@gwdg.de if your interface card is not FULLY
- * represented here.
- */
-static int sbpcd[] =
-{
- CDROM_PORT, SBPRO, /* probe with user's setup first */
-#if DISTRIBUTION
- 0x230, 1, /* Soundblaster Pro and 16 (default) */
-#if 0
- 0x300, 0, /* CI-101P (default), WDH-7001C (default),
- Galaxy (default), Reveal (one default) */
- 0x250, 1, /* OmniCD default, Soundblaster Pro and 16 */
- 0x2C0, 3, /* Teac 16-bit cards */
- 0x260, 1, /* OmniCD */
- 0x320, 0, /* Lasermate, CI-101P, WDH-7001C, Galaxy, Reveal (other default),
- Longshine LCS-6853 (default) */
- 0x338, 0, /* Reveal Sound Wave 32 card model #SC600 */
- 0x340, 0, /* Mozart sound card (default), Lasermate, CI-101P */
- 0x360, 0, /* Lasermate, CI-101P */
- 0x270, 1, /* Soundblaster 16 */
- 0x670, 0, /* "sound card #9" */
- 0x690, 0, /* "sound card #9" */
- 0x338, 2, /* SPEA Media FX, Ensonic SoundScape (default) */
- 0x328, 2, /* SPEA Media FX */
- 0x348, 2, /* SPEA Media FX */
- 0x634, 0, /* some newer sound cards */
- 0x638, 0, /* some newer sound cards */
- 0x230, 1, /* some newer sound cards */
- /* due to incomplete address decoding of the SbPro card, these must be last */
- 0x630, 0, /* "sound card #9" (default) */
- 0x650, 0, /* "sound card #9" */
-#ifdef MODULE
- /*
- * some "hazardous" locations (no harm with the loadable version)
- * (will stop the bus if a NE2000 ethernet card resides at offset -0x10)
- */
- 0x330, 0, /* Lasermate, CI-101P, WDH-7001C */
- 0x350, 0, /* Lasermate, CI-101P */
- 0x358, 2, /* SPEA Media FX */
- 0x370, 0, /* Lasermate, CI-101P */
- 0x290, 1, /* Soundblaster 16 */
- 0x310, 0, /* Lasermate, CI-101P, WDH-7001C */
-#endif /* MODULE */
-#endif
-#endif /* DISTRIBUTION */
-};
-
-/*
- * Protects access to global structures etc.
- */
-static __cacheline_aligned DEFINE_SPINLOCK(sbpcd_lock);
-static struct request_queue *sbpcd_queue;
-
-/* You can only set the first pair, from old MODULE_PARM code. */
-static int sbpcd_set(const char *val, struct kernel_param *kp)
-{
- get_options((char *)val, 2, (int *)sbpcd);
- return 0;
-}
-module_param_call(sbpcd, sbpcd_set, NULL, NULL, 0);
-
-#define NUM_PROBE (sizeof(sbpcd) / sizeof(int))
-
-/*==========================================================================*/
-
-#define INLINE inline
-
-/*==========================================================================*/
-/*
- * the forward references:
- */
-static void sbp_sleep(u_int);
-static void mark_timeout_delay(u_long);
-static void mark_timeout_data(u_long);
-#if 0
-static void mark_timeout_audio(u_long);
-#endif
-static void sbp_read_cmd(struct request *req);
-static int sbp_data(struct request *req);
-static int cmd_out(void);
-static int DiskInfo(void);
-
-/*==========================================================================*/
-
-/*
- * pattern for printk selection:
- *
- * (1<<DBG_INF) necessary information
- * (1<<DBG_BSZ) BLOCK_SIZE trace
- * (1<<DBG_REA) "read" status trace
- * (1<<DBG_CHK) "media check" trace
- * (1<<DBG_TIM) datarate timer test
- * (1<<DBG_INI) initialization trace
- * (1<<DBG_TOC) tell TocEntry values
- * (1<<DBG_IOC) ioctl trace
- * (1<<DBG_STA) "ResponseStatus" trace
- * (1<<DBG_ERR) "cc_ReadError" trace
- * (1<<DBG_CMD) "cmd_out" trace
- * (1<<DBG_WRN) give explanation before auto-probing
- * (1<<DBG_MUL) multi session code test
- * (1<<DBG_IDX) "drive_id != 0" test code
- * (1<<DBG_IOX) some special information
- * (1<<DBG_DID) drive ID test
- * (1<<DBG_RES) drive reset info
- * (1<<DBG_SPI) SpinUp test info
- * (1<<DBG_IOS) ioctl trace: "subchannel"
- * (1<<DBG_IO2) ioctl trace: general
- * (1<<DBG_UPC) show UPC info
- * (1<<DBG_XA1) XA mode debugging
- * (1<<DBG_LCK) door (un)lock info
- * (1<<DBG_SQ1) dump SubQ frame
- * (1<<DBG_AUD) "read audio" debugging
- * (1<<DBG_SEQ) Sequoia interface configuration trace
- * (1<<DBG_LCS) Longshine LCS-7260 debugging trace
- * (1<<DBG_CD2) MKE/Funai CD200 debugging trace
- * (1<<DBG_TEA) TEAC CD-55A debugging trace
- * (1<<DBG_ECS) ECS-AT (Vertos-100) debugging trace
- * (1<<DBG_000) unnecessary information
- */
-#if DISTRIBUTION
-static int sbpcd_debug = (1<<DBG_INF);
-#else
-static int sbpcd_debug = 0 & ((1<<DBG_INF) |
- (1<<DBG_TOC) |
- (1<<DBG_MUL) |
- (1<<DBG_UPC));
-#endif /* DISTRIBUTION */
-
-static int sbpcd_ioaddr = CDROM_PORT; /* default I/O base address */
-static int sbpro_type = SBPRO;
-static unsigned char f_16bit;
-static unsigned char do_16bit;
-static int CDo_command, CDo_reset;
-static int CDo_sel_i_d, CDo_enable;
-static int CDi_info, CDi_status, CDi_data;
-static struct cdrom_msf msf;
-static struct cdrom_ti ti;
-static struct cdrom_tochdr tochdr;
-static struct cdrom_tocentry tocentry;
-static struct cdrom_subchnl SC;
-static struct cdrom_volctrl volctrl;
-static struct cdrom_read_audio read_audio;
-
-static unsigned char msgnum;
-static char msgbuf[80];
-
-static int max_drives = MAX_DRIVES;
-module_param(max_drives, int, 0);
-#ifndef MODULE
-static unsigned char setup_done;
-static const char *str_sb_l = "soundblaster";
-static const char *str_sp_l = "spea";
-static const char *str_ss_l = "soundscape";
-static const char *str_t16_l = "teac16bit";
-static const char *str_ss = "SoundScape";
-#endif
-static const char *str_sb = "SoundBlaster";
-static const char *str_lm = "LaserMate";
-static const char *str_sp = "SPEA";
-static const char *str_t16 = "Teac16bit";
-static const char *type;
-static const char *major_name="sbpcd";
-
-/*==========================================================================*/
-
-#ifdef FUTURE
-static DECLARE_WAIT_QUEUE_HEAD(sbp_waitq);
-#endif /* FUTURE */
-
-static int teac=SBP_TEAC_SPEED;
-static int buffers=SBP_BUFFER_FRAMES;
-
-static u_char family0[]="MATSHITA"; /* MKE CR-521, CR-522, CR-523 */
-static u_char family1[]="CR-56"; /* MKE CR-562, CR-563 */
-static u_char family2[]="CD200"; /* MKE CD200, Funai CD200F */
-static u_char familyL[]="LCS-7260"; /* Longshine LCS-7260 */
-static u_char familyT[]="CD-55"; /* TEAC CD-55A */
-static u_char familyV[]="ECS-AT"; /* ECS Vertos 100 */
-
-static u_int recursion; /* internal testing only */
-static u_int fatal_err; /* internal testing only */
-static u_int response_count;
-static u_int flags_cmd_out;
-static u_char cmd_type;
-static u_char drvcmd[10];
-static u_char infobuf[20];
-static u_char xa_head_buf[CD_XA_HEAD];
-static u_char xa_tail_buf[CD_XA_TAIL];
-
-#if OLD_BUSY
-static volatile u_char busy_data;
-static volatile u_char busy_audio; /* true semaphores would be safer */
-#endif /* OLD_BUSY */
-static DECLARE_MUTEX(ioctl_read_sem);
-static u_long timeout;
-static volatile u_char timed_out_delay;
-static volatile u_char timed_out_data;
-#if 0
-static volatile u_char timed_out_audio;
-#endif
-static u_int datarate= 1000000;
-static u_int maxtim16=16000000;
-static u_int maxtim04= 4000000;
-static u_int maxtim02= 2000000;
-static u_int maxtim_8= 30000;
-#if LONG_TIMING
-static u_int maxtim_data= 9000;
-#else
-static u_int maxtim_data= 3000;
-#endif /* LONG_TIMING */
-#if DISTRIBUTION
-static int n_retries=6;
-#else
-static int n_retries=6;
-#endif
-/*==========================================================================*/
-
-static int ndrives;
-static u_char drv_pattern[NR_SBPCD]={speed_auto,speed_auto,speed_auto,speed_auto};
-
-/*==========================================================================*/
-/*
- * drive space begins here (needed separate for each unit)
- */
-static struct sbpcd_drive {
- char drv_id; /* "jumpered" drive ID or -1 */
- char drv_sel; /* drive select lines bits */
-
- char drive_model[9];
- u_char firmware_version[4];
- char f_eject; /* auto-eject flag: 0 or 1 */
- u_char *sbp_buf; /* Pointer to internal data buffer,
- space allocated during sbpcd_init() */
- u_int sbp_bufsiz; /* size of sbp_buf (# of frames) */
- int sbp_first_frame; /* First frame in buffer */
- int sbp_last_frame; /* Last frame in buffer */
- int sbp_read_frames; /* Number of frames being read to buffer */
- int sbp_current; /* Frame being currently read */
-
- u_char mode; /* read_mode: READ_M1, READ_M2, READ_SC, READ_AU */
- u_char *aud_buf; /* Pointer to audio data buffer,
- space allocated during sbpcd_init() */
- u_int sbp_audsiz; /* size of aud_buf (# of raw frames) */
- u_int drv_type;
- u_char drv_options;
- int status_bits;
- u_char diskstate_flags;
- u_char sense_byte;
-
- u_char CD_changed;
- char open_count;
- u_char error_byte;
-
- u_char f_multisession;
- u_int lba_multi;
- int first_session;
- int last_session;
- int track_of_last_session;
-
- u_char audio_state;
- u_int pos_audio_start;
- u_int pos_audio_end;
- char vol_chan0;
- u_char vol_ctrl0;
- char vol_chan1;
- u_char vol_ctrl1;
-#if 000 /* no supported drive has it */
- char vol_chan2;
- u_char vol_ctrl2;
- char vol_chan3;
- u_char vol_ctrl3;
-#endif /*000 */
- u_char volume_control; /* TEAC on/off bits */
-
- u_char SubQ_ctl_adr;
- u_char SubQ_trk;
- u_char SubQ_pnt_idx;
- u_int SubQ_run_tot;
- u_int SubQ_run_trk;
- u_char SubQ_whatisthis;
-
- u_char UPC_ctl_adr;
- u_char UPC_buf[7];
-
- int frame_size;
- int CDsize_frm;
-
- u_char xa_byte; /* 0x20: XA capabilities */
- u_char n_first_track; /* binary */
- u_char n_last_track; /* binary (not bcd), 0x01...0x63 */
- u_int size_msf; /* time of whole CD, position of LeadOut track */
- u_int size_blk;
-
- u_char TocEnt_nixbyte; /* em */
- u_char TocEnt_ctl_adr;
- u_char TocEnt_number;
- u_char TocEnt_format; /* em */
- u_int TocEnt_address;
-#ifdef SAFE_MIXED
- char has_data;
-#endif /* SAFE_MIXED */
- u_char ored_ctl_adr; /* to detect if CDROM contains data tracks */
-
- struct {
- u_char nixbyte; /* em */
- u_char ctl_adr; /* 0x4x: data, 0x0x: audio */
- u_char number;
- u_char format; /* em */ /* 0x00: lba, 0x01: msf */
- u_int address;
- } TocBuffer[MAX_TRACKS+1]; /* last entry faked */
-
- int in_SpinUp; /* CR-52x test flag */
- int n_bytes; /* TEAC awaited response count */
- u_char error_state, b3, b4; /* TEAC command error state */
- u_char f_drv_error; /* TEAC command error flag */
- u_char speed_byte;
- int frmsiz;
- u_char f_XA; /* 1: XA */
- u_char type_byte; /* 0, 1, 3 */
- u_char mode_xb_6;
- u_char mode_yb_7;
- u_char mode_xb_8;
- u_char delay;
- struct cdrom_device_info *sbpcd_infop;
- struct gendisk *disk;
-} D_S[NR_SBPCD];
-
-static struct sbpcd_drive *current_drive = D_S;
-
-/*
- * drive space ends here (needed separate for each unit)
- */
-/*==========================================================================*/
-#if 0
-unsigned long cli_sti; /* for saving the processor flags */
-#endif
-/*==========================================================================*/
-static DEFINE_TIMER(delay_timer, mark_timeout_delay, 0, 0);
-static DEFINE_TIMER(data_timer, mark_timeout_data, 0, 0);
-#if 0
-static DEFINE_TIMER(audio_timer, mark_timeout_audio, 0, 0);
-#endif
-/*==========================================================================*/
-/*
- * DDI interface
- */
-static void msg(int level, const char *fmt, ...)
-{
-#if DISTRIBUTION
-#define MSG_LEVEL KERN_NOTICE
-#else
-#define MSG_LEVEL KERN_INFO
-#endif /* DISTRIBUTION */
-
- char buf[256];
- va_list args;
-
- if (!(sbpcd_debug&(1<<level))) return;
-
- msgnum++;
- if (msgnum>99) msgnum=0;
- va_start(args, fmt);
- vsnprintf(buf, sizeof(buf), fmt, args);
- va_end(args);
- printk(MSG_LEVEL "%s-%d [%02d]: %s", major_name, current_drive - D_S, msgnum, buf);
-#if KLOGD_PAUSE
- sbp_sleep(KLOGD_PAUSE); /* else messages get lost */
-#endif /* KLOGD_PAUSE */
- return;
-}
-/*==========================================================================*/
-/*
- * DDI interface: runtime trace bit pattern maintenance
- */
-static int sbpcd_dbg_ioctl(unsigned long arg, int level)
-{
- switch(arg)
- {
- case 0: /* OFF */
- sbpcd_debug = DBG_INF;
- break;
-
- default:
- if (arg>=128) sbpcd_debug &= ~(1<<(arg-128));
- else sbpcd_debug |= (1<<arg);
- }
- return (arg);
-}
-/*==========================================================================*/
-static void mark_timeout_delay(u_long i)
-{
- timed_out_delay=1;
-#if 0
- msg(DBG_TIM,"delay timer expired.\n");
-#endif
-}
-/*==========================================================================*/
-static void mark_timeout_data(u_long i)
-{
- timed_out_data=1;
-#if 0
- msg(DBG_TIM,"data timer expired.\n");
-#endif
-}
-/*==========================================================================*/
-#if 0
-static void mark_timeout_audio(u_long i)
-{
- timed_out_audio=1;
-#if 0
- msg(DBG_TIM,"audio timer expired.\n");
-#endif
-}
-#endif
-/*==========================================================================*/
-/*
- * Wait a little while (used for polling the drive).
- */
-static void sbp_sleep(u_int time)
-{
- sti();
- schedule_timeout_interruptible(time);
- sti();
-}
-/*==========================================================================*/
-#define RETURN_UP(rc) {up(&ioctl_read_sem); return(rc);}
-/*==========================================================================*/
-/*
- * convert logical_block_address to m-s-f_number (3 bytes only)
- */
-static INLINE void lba2msf(int lba, u_char *msf)
-{
- lba += CD_MSF_OFFSET;
- msf[0] = lba / (CD_SECS*CD_FRAMES);
- lba %= CD_SECS*CD_FRAMES;
- msf[1] = lba / CD_FRAMES;
- msf[2] = lba % CD_FRAMES;
-}
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * convert msf-bin to msf-bcd
- */
-static INLINE void bin2bcdx(u_char *p) /* must work only up to 75 or 99 */
-{
- *p=((*p/10)<<4)|(*p%10);
-}
-/*==========================================================================*/
-static INLINE u_int blk2msf(u_int blk)
-{
- MSF msf;
- u_int mm;
-
- msf.c[3] = 0;
- msf.c[2] = (blk + CD_MSF_OFFSET) / (CD_SECS * CD_FRAMES);
- mm = (blk + CD_MSF_OFFSET) % (CD_SECS * CD_FRAMES);
- msf.c[1] = mm / CD_FRAMES;
- msf.c[0] = mm % CD_FRAMES;
- return (msf.n);
-}
-/*==========================================================================*/
-static INLINE u_int make16(u_char rh, u_char rl)
-{
- return ((rh<<8)|rl);
-}
-/*==========================================================================*/
-static INLINE u_int make32(u_int rh, u_int rl)
-{
- return ((rh<<16)|rl);
-}
-/*==========================================================================*/
-static INLINE u_char swap_nibbles(u_char i)
-{
- return ((i<<4)|(i>>4));
-}
-/*==========================================================================*/
-static INLINE u_char byt2bcd(u_char i)
-{
- return (((i/10)<<4)+i%10);
-}
-/*==========================================================================*/
-static INLINE u_char bcd2bin(u_char bcd)
-{
- return ((bcd>>4)*10+(bcd&0x0F));
-}
-/*==========================================================================*/
-static INLINE int msf2blk(int msfx)
-{
- MSF msf;
- int i;
-
- msf.n=msfx;
- i=(msf.c[2] * CD_SECS + msf.c[1]) * CD_FRAMES + msf.c[0] - CD_MSF_OFFSET;
- if (i<0) return (0);
- return (i);
-}
-/*==========================================================================*/
-/*
- * convert m-s-f_number (3 bytes only) to logical_block_address
- */
-static INLINE int msf2lba(u_char *msf)
-{
- int i;
-
- i=(msf[0] * CD_SECS + msf[1]) * CD_FRAMES + msf[2] - CD_MSF_OFFSET;
- if (i<0) return (0);
- return (i);
-}
-/*==========================================================================*/
-/* evaluate cc_ReadError code */
-static int sta2err(int sta)
-{
- if (famT_drive)
- {
- if (sta==0x00) return (0);
- if (sta==0x01) return (-604); /* CRC error */
- if (sta==0x02) return (-602); /* drive not ready */
- if (sta==0x03) return (-607); /* unknown media */
- if (sta==0x04) return (-612); /* general failure */
- if (sta==0x05) return (0);
- if (sta==0x06) return (-ERR_DISKCHANGE); /* disk change */
- if (sta==0x0b) return (-612); /* general failure */
- if (sta==0xff) return (-612); /* general failure */
- return (0);
- }
- else
- {
- if (sta<=2) return (sta);
- if (sta==0x05) return (-604); /* CRC error */
- if (sta==0x06) return (-606); /* seek error */
- if (sta==0x0d) return (-606); /* seek error */
- if (sta==0x0e) return (-603); /* unknown command */
- if (sta==0x14) return (-603); /* unknown command */
- if (sta==0x0c) return (-611); /* read fault */
- if (sta==0x0f) return (-611); /* read fault */
- if (sta==0x10) return (-611); /* read fault */
- if (sta>=0x16) return (-612); /* general failure */
- if (sta==0x11) return (-ERR_DISKCHANGE); /* disk change (LCS: removed) */
- if (famL_drive)
- if (sta==0x12) return (-ERR_DISKCHANGE); /* disk change (inserted) */
- return (-602); /* drive not ready */
- }
-}
-/*==========================================================================*/
-static INLINE void clr_cmdbuf(void)
-{
- int i;
-
- for (i=0;i<10;i++) drvcmd[i]=0;
- cmd_type=0;
-}
-/*==========================================================================*/
-static void flush_status(void)
-{
- int i;
-
- sbp_sleep(15*HZ/10);
- for (i=maxtim_data;i!=0;i--) inb(CDi_status);
-}
-/*====================================================================*/
-/*
- * CDi status loop for Teac CD-55A (Rob Riggs)
- *
- * This is needed because for some strange reason
- * the CD-55A can take a real long time to give a
- * status response. This seems to happen after we
- * issue a READ command where a long seek is involved.
- *
- * I tried to ensure that we get max throughput with
- * minimal busy waiting. We busy wait at first, then
- * "switch gears" and start sleeping. We sleep for
- * longer periods of time the longer we wait.
- *
- */
-static int CDi_stat_loop_T(void)
-{
- int i, gear=1;
- u_long timeout_1, timeout_2, timeout_3, timeout_4;
-
- timeout_1 = jiffies + HZ / 50; /* sbp_sleep(0) for a short period */
- timeout_2 = jiffies + HZ / 5; /* nap for no more than 200ms */
- timeout_3 = jiffies + 5 * HZ; /* sleep for up to 5s */
- timeout_4 = jiffies + 45 * HZ; /* long sleep for up to 45s. */
- do
- {
- i = inb(CDi_status);
- if (!(i&s_not_data_ready)) return (i);
- if (!(i&s_not_result_ready)) return (i);
- switch(gear)
- {
- case 4:
- sbp_sleep(HZ);
- if (time_after(jiffies, timeout_4)) gear++;
- msg(DBG_TEA, "CDi_stat_loop_T: long sleep active.\n");
- break;
- case 3:
- sbp_sleep(HZ/10);
- if (time_after(jiffies, timeout_3)) gear++;
- break;
- case 2:
- sbp_sleep(HZ/100);
- if (time_after(jiffies, timeout_2)) gear++;
- break;
- case 1:
- sbp_sleep(0);
- if (time_after(jiffies, timeout_1)) gear++;
- }
- } while (gear < 5);
- return -1;
-}
-/*==========================================================================*/
-static int CDi_stat_loop(void)
-{
- int i,j;
-
- for(timeout = jiffies + 10*HZ, i=maxtim_data; time_before(jiffies, timeout); )
- {
- for ( ;i!=0;i--)
- {
- j=inb(CDi_status);
- if (!(j&s_not_data_ready)) return (j);
- if (!(j&s_not_result_ready)) return (j);
- if (fam0L_drive) if (j&s_attention) return (j);
- }
- sbp_sleep(1);
- i = 1;
- }
- msg(DBG_LCS,"CDi_stat_loop failed in line %d\n", __LINE__);
- return (-1);
-}
-/*==========================================================================*/
-#if 00000
-/*==========================================================================*/
-static int tst_DataReady(void)
-{
- int i;
-
- i=inb(CDi_status);
- if (i&s_not_data_ready) return (0);
- return (1);
-}
-/*==========================================================================*/
-static int tst_ResultReady(void)
-{
- int i;
-
- i=inb(CDi_status);
- if (i&s_not_result_ready) return (0);
- return (1);
-}
-/*==========================================================================*/
-static int tst_Attention(void)
-{
- int i;
-
- i=inb(CDi_status);
- if (i&s_attention) return (1);
- return (0);
-}
-/*==========================================================================*/
-#endif
-/*==========================================================================*/
-static int ResponseInfo(void)
-{
- int i,j,st=0;
- u_long timeout;
-
- for (i=0,timeout=jiffies+HZ;i<response_count;i++)
- {
- for (j=maxtim_data; ; )
- {
- for ( ;j!=0;j-- )
- {
- st=inb(CDi_status);
- if (!(st&s_not_result_ready)) break;
- }
- if ((j!=0)||time_after_eq(jiffies, timeout)) break;
- sbp_sleep(1);
- j = 1;
- }
- if (time_after_eq(jiffies, timeout)) break;
- infobuf[i]=inb(CDi_info);
- }
-#if 000
- while (!(inb(CDi_status)&s_not_result_ready))
- {
- infobuf[i++]=inb(CDi_info);
- }
- j=i-response_count;
- if (j>0) msg(DBG_INF,"ResponseInfo: got %d trailing bytes.\n",j);
-#endif /* 000 */
- for (j=0;j<i;j++)
- sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
- msgbuf[j*3]=0;
- msg(DBG_CMD,"ResponseInfo:%s (%d,%d)\n",msgbuf,response_count,i);
- j=response_count-i;
- if (j>0) return (-j);
- else return (i);
-}
-/*==========================================================================*/
-static void EvaluateStatus(int st)
-{
- current_drive->status_bits=0;
- if (fam1_drive) current_drive->status_bits=st|p_success;
- else if (fam0_drive)
- {
- if (st&p_caddin_old) current_drive->status_bits |= p_door_closed|p_caddy_in;
- if (st&p_spinning) current_drive->status_bits |= p_spinning;
- if (st&p_check) current_drive->status_bits |= p_check;
- if (st&p_success_old) current_drive->status_bits |= p_success;
- if (st&p_busy_old) current_drive->status_bits |= p_busy_new;
- if (st&p_disk_ok) current_drive->status_bits |= p_disk_ok;
- }
- else if (famLV_drive)
- {
- current_drive->status_bits |= p_success;
- if (st&p_caddin_old) current_drive->status_bits |= p_disk_ok|p_caddy_in;
- if (st&p_spinning) current_drive->status_bits |= p_spinning;
- if (st&p_check) current_drive->status_bits |= p_check;
- if (st&p_busy_old) current_drive->status_bits |= p_busy_new;
- if (st&p_lcs_door_closed) current_drive->status_bits |= p_door_closed;
- if (st&p_lcs_door_locked) current_drive->status_bits |= p_door_locked;
- }
- else if (fam2_drive)
- {
- current_drive->status_bits |= p_success;
- if (st&p2_check) current_drive->status_bits |= p1_check;
- if (st&p2_door_closed) current_drive->status_bits |= p1_door_closed;
- if (st&p2_disk_in) current_drive->status_bits |= p1_disk_in;
- if (st&p2_busy1) current_drive->status_bits |= p1_busy;
- if (st&p2_busy2) current_drive->status_bits |= p1_busy;
- if (st&p2_spinning) current_drive->status_bits |= p1_spinning;
- if (st&p2_door_locked) current_drive->status_bits |= p1_door_locked;
- if (st&p2_disk_ok) current_drive->status_bits |= p1_disk_ok;
- }
- else if (famT_drive)
- {
- return; /* still needs to get coded */
- current_drive->status_bits |= p_success;
- if (st&p2_check) current_drive->status_bits |= p1_check;
- if (st&p2_door_closed) current_drive->status_bits |= p1_door_closed;
- if (st&p2_disk_in) current_drive->status_bits |= p1_disk_in;
- if (st&p2_busy1) current_drive->status_bits |= p1_busy;
- if (st&p2_busy2) current_drive->status_bits |= p1_busy;
- if (st&p2_spinning) current_drive->status_bits |= p1_spinning;
- if (st&p2_door_locked) current_drive->status_bits |= p1_door_locked;
- if (st&p2_disk_ok) current_drive->status_bits |= p1_disk_ok;
- }
- return;
-}
-/*==========================================================================*/
-static int cmd_out_T(void);
-
-static int get_state_T(void)
-{
- int i;
-
- clr_cmdbuf();
- current_drive->n_bytes=1;
- drvcmd[0]=CMDT_STATUS;
- i=cmd_out_T();
- if (i>=0) i=infobuf[0];
- else
- {
- msg(DBG_TEA,"get_state_T error %d\n", i);
- return (i);
- }
- if (i>=0)
- /* 2: closed, disk in */
- current_drive->status_bits=p1_door_closed|p1_disk_in|p1_spinning|p1_disk_ok;
- else if (current_drive->error_state==6)
- {
- /* 3: closed, disk in, changed ("06 xx xx") */
- current_drive->status_bits=p1_door_closed|p1_disk_in;
- current_drive->CD_changed=0xFF;
- current_drive->diskstate_flags &= ~toc_bit;
- }
- else if ((current_drive->error_state!=2)||(current_drive->b3!=0x3A)||(current_drive->b4==0x00))
- {
- /* 1: closed, no disk ("xx yy zz"or "02 3A 00") */
- current_drive->status_bits=p1_door_closed;
- current_drive->open_count=0;
- }
- else if (current_drive->b4==0x01)
- {
- /* 0: open ("02 3A 01") */
- current_drive->status_bits=0;
- current_drive->open_count=0;
- }
- else
- {
- /* 1: closed, no disk ("02 3A xx") */
- current_drive->status_bits=p1_door_closed;
- current_drive->open_count=0;
- }
- return (current_drive->status_bits);
-}
-/*==========================================================================*/
-static int ResponseStatus(void)
-{
- int i,j;
- u_long timeout;
-
- msg(DBG_STA,"doing ResponseStatus...\n");
- if (famT_drive) return (get_state_T());
- if (flags_cmd_out & f_respo3) timeout = jiffies;
- else if (flags_cmd_out & f_respo2) timeout = jiffies + 16*HZ;
- else timeout = jiffies + 4*HZ;
- j=maxtim_8;
- do
- {
- for ( ;j!=0;j--)
- {
- i=inb(CDi_status);
- if (!(i&s_not_result_ready)) break;
- }
- if ((j!=0)||time_after(jiffies, timeout)) break;
- sbp_sleep(1);
- j = 1;
- }
- while (1);
- if (j==0)
- {
- if ((flags_cmd_out & f_respo3) == 0)
- msg(DBG_STA,"ResponseStatus: timeout.\n");
- current_drive->status_bits=0;
- return (-401);
- }
- i=inb(CDi_info);
- msg(DBG_STA,"ResponseStatus: response %02X.\n", i);
- EvaluateStatus(i);
- msg(DBG_STA,"status_bits=%02X, i=%02X\n",current_drive->status_bits,i);
- return (current_drive->status_bits);
-}
-/*==========================================================================*/
-static void cc_ReadStatus(void)
-{
- int i;
-
- msg(DBG_STA,"giving cc_ReadStatus command\n");
- if (famT_drive) return;
- SBPCD_CLI;
- if (fam0LV_drive) OUT(CDo_command,CMD0_STATUS);
- else if (fam1_drive) OUT(CDo_command,CMD1_STATUS);
- else if (fam2_drive) OUT(CDo_command,CMD2_STATUS);
- if (!fam0LV_drive) for (i=0;i<6;i++) OUT(CDo_command,0);
- SBPCD_STI;
-}
-/*==========================================================================*/
-static int cc_ReadError(void)
-{
- int i;
-
- clr_cmdbuf();
- msg(DBG_ERR,"giving cc_ReadError command.\n");
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_READ_ERR;
- response_count=8;
- flags_cmd_out=f_putcmd|f_ResponseStatus;
- }
- else if (fam0LV_drive)
- {
- drvcmd[0]=CMD0_READ_ERR;
- response_count=6;
- if (famLV_drive)
- flags_cmd_out=f_putcmd;
- else
- flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus;
- }
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_READ_ERR;
- response_count=6;
- flags_cmd_out=f_putcmd;
- }
- else if (famT_drive)
- {
- response_count=5;
- drvcmd[0]=CMDT_READ_ERR;
- }
- i=cmd_out();
- current_drive->error_byte=0;
- msg(DBG_ERR,"cc_ReadError: cmd_out(CMDx_READ_ERR) returns %d (%02X)\n",i,i);
- if (i<0) return (i);
- if (fam0V_drive) i=1;
- else i=2;
- current_drive->error_byte=infobuf[i];
- msg(DBG_ERR,"cc_ReadError: infobuf[%d] is %d (%02X)\n",i,current_drive->error_byte,current_drive->error_byte);
- i=sta2err(infobuf[i]);
- if (i==-ERR_DISKCHANGE)
- {
- current_drive->CD_changed=0xFF;
- current_drive->diskstate_flags &= ~toc_bit;
- }
- return (i);
-}
-/*==========================================================================*/
-static int cc_DriveReset(void);
-
-static int cmd_out_T(void)
-{
-#undef CMDT_TRIES
-#define CMDT_TRIES 1000
-#define TEST_FALSE_FF 1
-
- int i, j, l=0, m, ntries;
- unsigned long flags;
-
- current_drive->error_state=0;
- current_drive->b3=0;
- current_drive->b4=0;
- current_drive->f_drv_error=0;
- for (i=0;i<10;i++) sprintf(&msgbuf[i*3]," %02X",drvcmd[i]);
- msgbuf[i*3]=0;
- msg(DBG_CMD,"cmd_out_T:%s\n",msgbuf);
-
- OUT(CDo_sel_i_d,0);
- OUT(CDo_enable,current_drive->drv_sel);
- i=inb(CDi_status);
- do_16bit=0;
- if ((f_16bit)&&(!(i&0x80)))
- {
- do_16bit=1;
- msg(DBG_TEA,"cmd_out_T: do_16bit set.\n");
- }
- if (!(i&s_not_result_ready))
- do
- {
- j=inb(CDi_info);
- i=inb(CDi_status);
- sbp_sleep(0);
- msg(DBG_TEA,"cmd_out_T: spurious !s_not_result_ready. (%02X)\n", j);
- }
- while (!(i&s_not_result_ready));
- save_flags(flags); cli();
- for (i=0;i<10;i++) OUT(CDo_command,drvcmd[i]);
- restore_flags(flags);
- for (ntries=CMDT_TRIES;ntries>0;ntries--)
- {
- if (drvcmd[0]==CMDT_READ_VER) sbp_sleep(HZ); /* fixme */
-#if 01
- OUT(CDo_sel_i_d,1);
-#endif /* 01 */
- if (teac==2)
- {
- if ((i=CDi_stat_loop_T()) == -1) break;
- }
- else
- {
-#if 0
- OUT(CDo_sel_i_d,1);
-#endif /* 0 */
- i=inb(CDi_status);
- }
- if (!(i&s_not_data_ready)) /* f.e. CMDT_DISKINFO */
- {
- OUT(CDo_sel_i_d,1);
- if (drvcmd[0]==CMDT_READ) return (0); /* handled elsewhere */
- if (drvcmd[0]==CMDT_DISKINFO)
- {
- l=0;
- do
- {
- if (do_16bit)
- {
- i=inw(CDi_data);
- infobuf[l++]=i&0x0ff;
- infobuf[l++]=i>>8;
-#if TEST_FALSE_FF
- if ((l==2)&&(infobuf[0]==0x0ff))
- {
- infobuf[0]=infobuf[1];
- l=1;
- msg(DBG_TEA,"cmd_out_T: do_16bit: false first byte!\n");
- }
-#endif /* TEST_FALSE_FF */
- }
- else infobuf[l++]=inb(CDi_data);
- i=inb(CDi_status);
- }
- while (!(i&s_not_data_ready));
- for (j=0;j<l;j++) sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
- msgbuf[j*3]=0;
- msg(DBG_CMD,"cmd_out_T data response:%s\n", msgbuf);
- }
- else
- {
- msg(DBG_TEA,"cmd_out_T: data response with cmd_%02X!\n",
- drvcmd[0]);
- j=0;
- do
- {
- if (do_16bit) i=inw(CDi_data);
- else i=inb(CDi_data);
- j++;
- i=inb(CDi_status);
- }
- while (!(i&s_not_data_ready));
- msg(DBG_TEA,"cmd_out_T: data response: discarded %d bytes/words.\n", j);
- fatal_err++;
- }
- }
- i=inb(CDi_status);
- if (!(i&s_not_result_ready))
- {
- OUT(CDo_sel_i_d,0);
- if (drvcmd[0]==CMDT_DISKINFO) m=l;
- else m=0;
- do
- {
- infobuf[m++]=inb(CDi_info);
- i=inb(CDi_status);
- }
- while (!(i&s_not_result_ready));
- for (j=0;j<m;j++) sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
- msgbuf[j*3]=0;
- msg(DBG_CMD,"cmd_out_T info response:%s\n", msgbuf);
- if (drvcmd[0]==CMDT_DISKINFO)
- {
- infobuf[0]=infobuf[l];
- if (infobuf[0]!=0x02) return (l); /* data length */
- }
- else if (infobuf[0]!=0x02) return (m); /* info length */
- do
- {
- ++recursion;
- if (recursion>1) msg(DBG_TEA,"cmd_out_T READ_ERR recursion (%02X): %d !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n", drvcmd[0], recursion);
- clr_cmdbuf();
- drvcmd[0]=CMDT_READ_ERR;
- j=cmd_out_T(); /* !!! recursive here !!! */
- --recursion;
- sbp_sleep(1);
- }
- while (j<0);
- current_drive->error_state=infobuf[2];
- current_drive->b3=infobuf[3];
- current_drive->b4=infobuf[4];
- if (current_drive->f_drv_error)
- {
- current_drive->f_drv_error=0;
- cc_DriveReset();
- current_drive->error_state=2;
- }
- return (-current_drive->error_state-400);
- }
- if (drvcmd[0]==CMDT_READ) return (0); /* handled elsewhere */
- if ((teac==0)||(ntries<(CMDT_TRIES-5))) sbp_sleep(HZ/10);
- else sbp_sleep(HZ/100);
- if (ntries>(CMDT_TRIES-50)) continue;
- msg(DBG_TEA,"cmd_out_T: next CMDT_TRIES (%02X): %d.\n", drvcmd[0], ntries-1);
- }
- current_drive->f_drv_error=1;
- cc_DriveReset();
- current_drive->error_state=2;
- return (-99);
-}
-/*==========================================================================*/
-static int cmd_out(void)
-{
- int i=0;
-
- if (famT_drive) return(cmd_out_T());
-
- if (flags_cmd_out&f_putcmd)
- {
- unsigned long flags;
- for (i=0;i<7;i++)
- sprintf(&msgbuf[i*3], " %02X", drvcmd[i]);
- msgbuf[i*3]=0;
- msg(DBG_CMD,"cmd_out:%s\n", msgbuf);
- save_flags(flags); cli();
- for (i=0;i<7;i++) OUT(CDo_command,drvcmd[i]);
- restore_flags(flags);
- }
- if (response_count!=0)
- {
- if (cmd_type!=0)
- {
- if (sbpro_type==1) OUT(CDo_sel_i_d,1);
- msg(DBG_INF,"misleaded to try ResponseData.\n");
- if (sbpro_type==1) OUT(CDo_sel_i_d,0);
- return (-22);
- }
- else i=ResponseInfo();
- if (i<0) return (i);
- }
- if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to CDi_stat_loop.\n");
- if (flags_cmd_out&f_lopsta)
- {
- i=CDi_stat_loop();
- if ((i<0)||!(i&s_attention)) return (-8);
- }
- if (!(flags_cmd_out&f_getsta)) goto LOC_229;
-
- LOC_228:
- if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cc_ReadStatus.\n");
- cc_ReadStatus();
-
- LOC_229:
- if (flags_cmd_out&f_ResponseStatus)
- {
- if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to ResponseStatus.\n");
- i=ResponseStatus();
- /* builds status_bits, returns orig. status or p_busy_new */
- if (i<0) return (i);
- if (flags_cmd_out&(f_bit1|f_wait_if_busy))
- {
- if (!st_check)
- {
- if ((flags_cmd_out&f_bit1)&&(i&p_success)) goto LOC_232;
- if ((!(flags_cmd_out&f_wait_if_busy))||(!st_busy)) goto LOC_228;
- }
- }
- }
- LOC_232:
- if (!(flags_cmd_out&f_obey_p_check)) return (0);
- if (!st_check) return (0);
- if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cc_ReadError.\n");
- i=cc_ReadError();
- if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cmd_out OK.\n");
- msg(DBG_000,"cmd_out: cc_ReadError=%d\n", i);
- return (i);
-}
-/*==========================================================================*/
-static int cc_Seek(u_int pos, char f_blk_msf)
-{
- int i;
-
- clr_cmdbuf();
- if (f_blk_msf>1) return (-3);
- if (fam0V_drive)
- {
- drvcmd[0]=CMD0_SEEK;
- if (f_blk_msf==1) pos=msf2blk(pos);
- drvcmd[2]=(pos>>16)&0x00FF;
- drvcmd[3]=(pos>>8)&0x00FF;
- drvcmd[4]=pos&0x00FF;
- if (fam0_drive)
- flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
- f_ResponseStatus | f_obey_p_check | f_bit1;
- else
- flags_cmd_out = f_putcmd;
- }
- else if (fam1L_drive)
- {
- drvcmd[0]=CMD1_SEEK; /* same as CMD1_ and CMDL_ */
- if (f_blk_msf==0) pos=blk2msf(pos);
- drvcmd[1]=(pos>>16)&0x00FF;
- drvcmd[2]=(pos>>8)&0x00FF;
- drvcmd[3]=pos&0x00FF;
- if (famL_drive)
- flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
- else
- flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_SEEK;
- if (f_blk_msf==0) pos=blk2msf(pos);
- drvcmd[2]=(pos>>24)&0x00FF;
- drvcmd[3]=(pos>>16)&0x00FF;
- drvcmd[4]=(pos>>8)&0x00FF;
- drvcmd[5]=pos&0x00FF;
- flags_cmd_out=f_putcmd|f_ResponseStatus;
- }
- else if (famT_drive)
- {
- drvcmd[0]=CMDT_SEEK;
- if (f_blk_msf==1) pos=msf2blk(pos);
- drvcmd[2]=(pos>>24)&0x00FF;
- drvcmd[3]=(pos>>16)&0x00FF;
- drvcmd[4]=(pos>>8)&0x00FF;
- drvcmd[5]=pos&0x00FF;
- current_drive->n_bytes=1;
- }
- response_count=0;
- i=cmd_out();
- return (i);
-}
-/*==========================================================================*/
-static int cc_SpinUp(void)
-{
- int i;
-
- msg(DBG_SPI,"SpinUp.\n");
- current_drive->in_SpinUp = 1;
- clr_cmdbuf();
- if (fam0LV_drive)
- {
- drvcmd[0]=CMD0_SPINUP;
- if (fam0L_drive)
- flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|
- f_ResponseStatus|f_obey_p_check|f_bit1;
- else
- flags_cmd_out=f_putcmd;
- }
- else if (fam1_drive)
- {
- drvcmd[0]=CMD1_SPINUP;
- flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_TRAY_CTL;
- drvcmd[4]=0x01; /* "spinup" */
- flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
- }
- else if (famT_drive)
- {
- drvcmd[0]=CMDT_TRAY_CTL;
- drvcmd[4]=0x03; /* "insert", it hopefully spins the drive up */
- }
- response_count=0;
- i=cmd_out();
- current_drive->in_SpinUp = 0;
- return (i);
-}
-/*==========================================================================*/
-static int cc_SpinDown(void)
-{
- int i;
-
- if (fam0_drive) return (0);
- clr_cmdbuf();
- response_count=0;
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_SPINDOWN;
- flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_TRAY_CTL;
- drvcmd[4]=0x02; /* "eject" */
- flags_cmd_out=f_putcmd|f_ResponseStatus;
- }
- else if (famL_drive)
- {
- drvcmd[0]=CMDL_SPINDOWN;
- drvcmd[1]=1;
- flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
- }
- else if (famV_drive)
- {
- drvcmd[0]=CMDV_SPINDOWN;
- flags_cmd_out=f_putcmd;
- }
- else if (famT_drive)
- {
- drvcmd[0]=CMDT_TRAY_CTL;
- drvcmd[4]=0x02; /* "eject" */
- }
- i=cmd_out();
- return (i);
-}
-/*==========================================================================*/
-static int cc_get_mode_T(void)
-{
- int i;
-
- clr_cmdbuf();
- response_count=10;
- drvcmd[0]=CMDT_GETMODE;
- drvcmd[4]=response_count;
- i=cmd_out_T();
- return (i);
-}
-/*==========================================================================*/
-static int cc_set_mode_T(void)
-{
- int i;
-
- clr_cmdbuf();
- response_count=1;
- drvcmd[0]=CMDT_SETMODE;
- drvcmd[1]=current_drive->speed_byte;
- drvcmd[2]=current_drive->frmsiz>>8;
- drvcmd[3]=current_drive->frmsiz&0x0FF;
- drvcmd[4]=current_drive->f_XA; /* 1: XA */
- drvcmd[5]=current_drive->type_byte; /* 0, 1, 3 */
- drvcmd[6]=current_drive->mode_xb_6;
- drvcmd[7]=current_drive->mode_yb_7|current_drive->volume_control;
- drvcmd[8]=current_drive->mode_xb_8;
- drvcmd[9]=current_drive->delay;
- i=cmd_out_T();
- return (i);
-}
-/*==========================================================================*/
-static int cc_prep_mode_T(void)
-{
- int i, j;
-
- i=cc_get_mode_T();
- if (i<0) return (i);
- for (i=0;i<10;i++)
- sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
- msgbuf[i*3]=0;
- msg(DBG_TEA,"CMDT_GETMODE:%s\n", msgbuf);
- current_drive->speed_byte=0x02; /* 0x02: auto quad, 0x82: quad, 0x81: double, 0x80: single */
- current_drive->frmsiz=make16(infobuf[2],infobuf[3]);
- current_drive->f_XA=infobuf[4];
- if (current_drive->f_XA==0) current_drive->type_byte=0;
- else current_drive->type_byte=1;
- current_drive->mode_xb_6=infobuf[6];
- current_drive->mode_yb_7=1;
- current_drive->mode_xb_8=infobuf[8];
- current_drive->delay=0; /* 0, 1, 2, 3 */
- j=cc_set_mode_T();
- i=cc_get_mode_T();
- for (i=0;i<10;i++)
- sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
- msgbuf[i*3]=0;
- msg(DBG_TEA,"CMDT_GETMODE:%s\n", msgbuf);
- return (j);
-}
-/*==========================================================================*/
-static int cc_SetSpeed(u_char speed, u_char x1, u_char x2)
-{
- int i;
-
- if (fam0LV_drive) return (0);
- clr_cmdbuf();
- response_count=0;
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_SETMODE;
- drvcmd[1]=0x03;
- drvcmd[2]=speed;
- drvcmd[3]=x1;
- drvcmd[4]=x2;
- flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_SETSPEED;
- if (speed&speed_auto)
- {
- drvcmd[2]=0xFF;
- drvcmd[3]=0xFF;
- }
- else
- {
- drvcmd[2]=0;
- drvcmd[3]=150;
- }
- flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
- }
- else if (famT_drive)
- {
- return (0);
- }
- i=cmd_out();
- return (i);
-}
-/*==========================================================================*/
-static int cc_SetVolume(void)
-{
- int i;
- u_char channel0,channel1,volume0,volume1;
- u_char control0,value0,control1,value1;
-
- current_drive->diskstate_flags &= ~volume_bit;
- clr_cmdbuf();
- channel0=current_drive->vol_chan0;
- volume0=current_drive->vol_ctrl0;
- channel1=control1=current_drive->vol_chan1;
- volume1=value1=current_drive->vol_ctrl1;
- control0=value0=0;
-
- if (famV_drive) return (0);
-
- if (((current_drive->drv_options&audio_mono)!=0)&&(current_drive->drv_type>=drv_211))
- {
- if ((volume0!=0)&&(volume1==0))
- {
- volume1=volume0;
- channel1=channel0;
- }
- else if ((volume0==0)&&(volume1!=0))
- {
- volume0=volume1;
- channel0=channel1;
- }
- }
- if (channel0>1)
- {
- channel0=0;
- volume0=0;
- }
- if (channel1>1)
- {
- channel1=1;
- volume1=0;
- }
-
- if (fam1_drive)
- {
- control0=channel0+1;
- control1=channel1+1;
- value0=(volume0>volume1)?volume0:volume1;
- value1=value0;
- if (volume0==0) control0=0;
- if (volume1==0) control1=0;
- drvcmd[0]=CMD1_SETMODE;
- drvcmd[1]=0x05;
- drvcmd[3]=control0;
- drvcmd[4]=value0;
- drvcmd[5]=control1;
- drvcmd[6]=value1;
- flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam2_drive)
- {
- control0=channel0+1;
- control1=channel1+1;
- value0=(volume0>volume1)?volume0:volume1;
- value1=value0;
- if (volume0==0) control0=0;
- if (volume1==0) control1=0;
- drvcmd[0]=CMD2_SETMODE;
- drvcmd[1]=0x0E;
- drvcmd[3]=control0;
- drvcmd[4]=value0;
- drvcmd[5]=control1;
- drvcmd[6]=value1;
- flags_cmd_out=f_putcmd|f_ResponseStatus;
- }
- else if (famL_drive)
- {
- if ((volume0==0)||(channel0!=0)) control0 |= 0x80;
- if ((volume1==0)||(channel1!=1)) control0 |= 0x40;
- if (volume0|volume1) value0=0x80;
- drvcmd[0]=CMDL_SETMODE;
- drvcmd[1]=0x03;
- drvcmd[4]=control0;
- drvcmd[5]=value0;
- flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
- }
- else if (fam0_drive) /* different firmware levels */
- {
- if (current_drive->drv_type>=drv_300)
- {
- control0=volume0&0xFC;
- value0=volume1&0xFC;
- if ((volume0!=0)&&(volume0<4)) control0 |= 0x04;
- if ((volume1!=0)&&(volume1<4)) value0 |= 0x04;
- if (channel0!=0) control0 |= 0x01;
- if (channel1==1) value0 |= 0x01;
- }
- else
- {
- value0=(volume0>volume1)?volume0:volume1;
- if (current_drive->drv_type<drv_211)
- {
- if (channel0!=0)
- {
- i=channel1;
- channel1=channel0;
- channel0=i;
- i=volume1;
- volume1=volume0;
- volume0=i;
- }
- if (channel0==channel1)
- {
- if (channel0==0)
- {
- channel1=1;
- volume1=0;
- volume0=value0;
- }
- else
- {
- channel0=0;
- volume0=0;
- volume1=value0;
- }
- }
- }
-
- if ((volume0!=0)&&(volume1!=0))
- {
- if (volume0==0xFF) volume1=0xFF;
- else if (volume1==0xFF) volume0=0xFF;
- }
- else if (current_drive->drv_type<drv_201) volume0=volume1=value0;
-
- if (current_drive->drv_type>=drv_201)
- {
- if (volume0==0) control0 |= 0x80;
- if (volume1==0) control0 |= 0x40;
- }
- if (current_drive->drv_type>=drv_211)
- {
- if (channel0!=0) control0 |= 0x20;
- if (channel1!=1) control0 |= 0x10;
- }
- }
- drvcmd[0]=CMD0_SETMODE;
- drvcmd[1]=0x83;
- drvcmd[4]=control0;
- drvcmd[5]=value0;
- flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
- }
- else if (famT_drive)
- {
- current_drive->volume_control=0;
- if (!volume0) current_drive->volume_control|=0x10;
- if (!volume1) current_drive->volume_control|=0x20;
- i=cc_prep_mode_T();
- if (i<0) return (i);
- }
- if (!famT_drive)
- {
- response_count=0;
- i=cmd_out();
- if (i<0) return (i);
- }
- current_drive->diskstate_flags |= volume_bit;
- return (0);
-}
-/*==========================================================================*/
-static int GetStatus(void)
-{
- int i;
-
- if (famT_drive) return (0);
- flags_cmd_out=f_getsta|f_ResponseStatus|f_obey_p_check;
- response_count=0;
- cmd_type=0;
- i=cmd_out();
- return (i);
-}
-/*==========================================================================*/
-static int cc_DriveReset(void)
-{
- int i;
-
- msg(DBG_RES,"cc_DriveReset called.\n");
- clr_cmdbuf();
- response_count=0;
- if (fam0LV_drive) OUT(CDo_reset,0x00);
- else if (fam1_drive)
- {
- drvcmd[0]=CMD1_RESET;
- flags_cmd_out=f_putcmd;
- i=cmd_out();
- }
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_RESET;
- flags_cmd_out=f_putcmd;
- i=cmd_out();
- OUT(CDo_reset,0x00);
- }
- else if (famT_drive)
- {
- OUT(CDo_sel_i_d,0);
- OUT(CDo_enable,current_drive->drv_sel);
- OUT(CDo_command,CMDT_RESET);
- for (i=1;i<10;i++) OUT(CDo_command,0);
- }
- if (fam0LV_drive) sbp_sleep(5*HZ); /* wait 5 seconds */
- else sbp_sleep(1*HZ); /* wait a second */
-#if 1
- if (famT_drive)
- {
- msg(DBG_TEA, "================CMDT_RESET given=================.\n");
- sbp_sleep(3*HZ);
- }
-#endif /* 1 */
- flush_status();
- i=GetStatus();
- if (i<0) return i;
- if (!famT_drive)
- if (current_drive->error_byte!=aud_12) return -501;
- return (0);
-}
-
-/*==========================================================================*/
-static int SetSpeed(void)
-{
- int i, speed;
-
- if (!(current_drive->drv_options&(speed_auto|speed_300|speed_150))) return (0);
- speed=speed_auto;
- if (!(current_drive->drv_options&speed_auto))
- {
- speed |= speed_300;
- if (!(current_drive->drv_options&speed_300)) speed=0;
- }
- i=cc_SetSpeed(speed,0,0);
- return (i);
-}
-
-static void switch_drive(struct sbpcd_drive *);
-
-static int sbpcd_select_speed(struct cdrom_device_info *cdi, int speed)
-{
- struct sbpcd_drive *p = cdi->handle;
- if (p != current_drive)
- switch_drive(p);
-
- return cc_SetSpeed(speed == 2 ? speed_300 : speed_150, 0, 0);
-}
-
-/*==========================================================================*/
-static int DriveReset(void)
-{
- int i;
-
- i=cc_DriveReset();
- if (i<0) return (-22);
- do
- {
- i=GetStatus();
- if ((i<0)&&(i!=-ERR_DISKCHANGE)) {
- return (-2); /* from sta2err */
- }
- if (!st_caddy_in) break;
- sbp_sleep(1);
- }
- while (!st_diskok);
-#if 000
- current_drive->CD_changed=1;
-#endif
- if ((st_door_closed) && (st_caddy_in))
- {
- i=DiskInfo();
- if (i<0) return (-23);
- }
- return (0);
-}
-
-static int sbpcd_reset(struct cdrom_device_info *cdi)
-{
- struct sbpcd_drive *p = cdi->handle;
- if (p != current_drive)
- switch_drive(p);
- return DriveReset();
-}
-
-/*==========================================================================*/
-static int cc_PlayAudio(int pos_audio_start,int pos_audio_end)
-{
- int i, j, n;
-
- if (current_drive->audio_state==audio_playing) return (-EINVAL);
- clr_cmdbuf();
- response_count=0;
- if (famLV_drive)
- {
- drvcmd[0]=CMDL_PLAY;
- i=msf2blk(pos_audio_start);
- n=msf2blk(pos_audio_end)+1-i;
- drvcmd[1]=(i>>16)&0x00FF;
- drvcmd[2]=(i>>8)&0x00FF;
- drvcmd[3]=i&0x00FF;
- drvcmd[4]=(n>>16)&0x00FF;
- drvcmd[5]=(n>>8)&0x00FF;
- drvcmd[6]=n&0x00FF;
- if (famL_drive)
- flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
- f_ResponseStatus | f_obey_p_check | f_wait_if_busy;
- else
- flags_cmd_out = f_putcmd;
- }
- else
- {
- j=1;
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_PLAY_MSF;
- flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus |
- f_obey_p_check | f_wait_if_busy;
- }
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_PLAY_MSF;
- flags_cmd_out = f_putcmd | f_ResponseStatus | f_obey_p_check;
- }
- else if (famT_drive)
- {
- drvcmd[0]=CMDT_PLAY_MSF;
- j=3;
- response_count=1;
- }
- else if (fam0_drive)
- {
- drvcmd[0]=CMD0_PLAY_MSF;
- flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
- f_ResponseStatus | f_obey_p_check | f_wait_if_busy;
- }
- drvcmd[j]=(pos_audio_start>>16)&0x00FF;
- drvcmd[j+1]=(pos_audio_start>>8)&0x00FF;
- drvcmd[j+2]=pos_audio_start&0x00FF;
- drvcmd[j+3]=(pos_audio_end>>16)&0x00FF;
- drvcmd[j+4]=(pos_audio_end>>8)&0x00FF;
- drvcmd[j+5]=pos_audio_end&0x00FF;
- }
- i=cmd_out();
- return (i);
-}
-/*==========================================================================*/
-static int cc_Pause_Resume(int pau_res)
-{
- int i;
-
- clr_cmdbuf();
- response_count=0;
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_PAU_RES;
- if (pau_res!=1) drvcmd[1]=0x80;
- flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_PAU_RES;
- if (pau_res!=1) drvcmd[2]=0x01;
- flags_cmd_out=f_putcmd|f_ResponseStatus;
- }
- else if (fam0LV_drive)
- {
- drvcmd[0]=CMD0_PAU_RES;
- if (pau_res!=1) drvcmd[1]=0x80;
- if (famL_drive)
- flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|
- f_obey_p_check|f_bit1;
- else if (famV_drive)
- flags_cmd_out=f_putcmd;
- else
- flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|
- f_obey_p_check;
- }
- else if (famT_drive)
- {
- if (pau_res==3) return (cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end));
- else if (pau_res==1) drvcmd[0]=CMDT_PAUSE;
- else return (-56);
- }
- i=cmd_out();
- return (i);
-}
-/*==========================================================================*/
-static int cc_LockDoor(char lock)
-{
- int i;
-
- if (fam0_drive) return (0);
- msg(DBG_LCK,"cc_LockDoor: %d (drive %d)\n", lock, current_drive - D_S);
- msg(DBG_LCS,"p_door_locked bit %d before\n", st_door_locked);
- clr_cmdbuf();
- response_count=0;
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_LOCK_CTL;
- if (lock==1) drvcmd[1]=0x01;
- flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_LOCK_CTL;
- if (lock==1) drvcmd[4]=0x01;
- flags_cmd_out=f_putcmd|f_ResponseStatus;
- }
- else if (famLV_drive)
- {
- drvcmd[0]=CMDL_LOCK_CTL;
- if (lock==1) drvcmd[1]=0x01;
- if (famL_drive)
- flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
- else
- flags_cmd_out=f_putcmd;
- }
- else if (famT_drive)
- {
- drvcmd[0]=CMDT_LOCK_CTL;
- if (lock==1) drvcmd[4]=0x01;
- }
- i=cmd_out();
- msg(DBG_LCS,"p_door_locked bit %d after\n", st_door_locked);
- return (i);
-}
-/*==========================================================================*/
-/*==========================================================================*/
-static int UnLockDoor(void)
-{
- int i,j;
-
- j=20;
- do
- {
- i=cc_LockDoor(0);
- --j;
- sbp_sleep(1);
- }
- while ((i<0)&&(j));
- if (i<0)
- {
- cc_DriveReset();
- return -84;
- }
- return (0);
-}
-/*==========================================================================*/
-static int LockDoor(void)
-{
- int i,j;
-
- j=20;
- do
- {
- i=cc_LockDoor(1);
- --j;
- sbp_sleep(1);
- }
- while ((i<0)&&(j));
- if (j==0)
- {
- cc_DriveReset();
- j=20;
- do
- {
- i=cc_LockDoor(1);
- --j;
- sbp_sleep(1);
- }
- while ((i<0)&&(j));
- }
- return (i);
-}
-
-static int sbpcd_lock_door(struct cdrom_device_info *cdi, int lock)
-{
- return lock ? LockDoor() : UnLockDoor();
-}
-
-/*==========================================================================*/
-static int cc_CloseTray(void)
-{
- int i;
-
- if (fam0_drive) return (0);
- msg(DBG_LCK,"cc_CloseTray (drive %d)\n", current_drive - D_S);
- msg(DBG_LCS,"p_door_closed bit %d before\n", st_door_closed);
-
- clr_cmdbuf();
- response_count=0;
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_TRAY_CTL;
- flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_TRAY_CTL;
- drvcmd[1]=0x01;
- drvcmd[4]=0x03; /* "insert" */
- flags_cmd_out=f_putcmd|f_ResponseStatus;
- }
- else if (famLV_drive)
- {
- drvcmd[0]=CMDL_TRAY_CTL;
- if (famLV_drive)
- flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|
- f_ResponseStatus|f_obey_p_check|f_bit1;
- else
- flags_cmd_out=f_putcmd;
- }
- else if (famT_drive)
- {
- drvcmd[0]=CMDT_TRAY_CTL;
- drvcmd[4]=0x03; /* "insert" */
- }
- i=cmd_out();
- msg(DBG_LCS,"p_door_closed bit %d after\n", st_door_closed);
-
- i=cc_ReadError();
- flags_cmd_out |= f_respo2;
- cc_ReadStatus(); /* command: give 1-byte status */
- i=ResponseStatus();
- if (famT_drive&&(i<0))
- {
- cc_DriveReset();
- i=ResponseStatus();
-#if 0
- sbp_sleep(HZ);
-#endif /* 0 */
- i=ResponseStatus();
- }
- if (i<0)
- {
- msg(DBG_INF,"sbpcd cc_CloseTray: ResponseStatus timed out (%d).\n",i);
- }
- if (!(famT_drive))
- {
- if (!st_spinning)
- {
- cc_SpinUp();
- if (st_check) i=cc_ReadError();
- flags_cmd_out |= f_respo2;
- cc_ReadStatus();
- i=ResponseStatus();
- } else {
- }
- }
- i=DiskInfo();
- return (i);
-}
-
-static int sbpcd_tray_move(struct cdrom_device_info *cdi, int position)
-{
- int retval=0;
- switch_drive(cdi->handle);
- /* DUH! --AJK */
- if(current_drive->CD_changed != 0xFF) {
- current_drive->CD_changed=0xFF;
- current_drive->diskstate_flags &= ~cd_size_bit;
- }
- if (position == 1) {
- cc_SpinDown();
- } else {
- retval=cc_CloseTray();
- }
- return retval;
-}
-
-/*==========================================================================*/
-static int cc_ReadSubQ(void)
-{
- int i,j;
-
- current_drive->diskstate_flags &= ~subq_bit;
- for (j=255;j>0;j--)
- {
- clr_cmdbuf();
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_READSUBQ;
- flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
- response_count=11;
- }
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_READSUBQ;
- drvcmd[1]=0x02;
- drvcmd[3]=0x01;
- flags_cmd_out=f_putcmd;
- response_count=10;
- }
- else if (fam0LV_drive)
- {
- drvcmd[0]=CMD0_READSUBQ;
- drvcmd[1]=0x02;
- if (famLV_drive)
- flags_cmd_out=f_putcmd;
- else
- flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
- response_count=13;
- }
- else if (famT_drive)
- {
- response_count=12;
- drvcmd[0]=CMDT_READSUBQ;
- drvcmd[1]=0x02;
- drvcmd[2]=0x40;
- drvcmd[3]=0x01;
- drvcmd[8]=response_count;
- }
- i=cmd_out();
- if (i<0) return (i);
- for (i=0;i<response_count;i++)
- {
- sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
- msgbuf[i*3]=0;
- msg(DBG_SQ1,"cc_ReadSubQ:%s\n", msgbuf);
- }
- if (famT_drive) break;
- if (infobuf[0]!=0) break;
- if ((!st_spinning) || (j==1))
- {
- current_drive->SubQ_ctl_adr=current_drive->SubQ_trk=current_drive->SubQ_pnt_idx=current_drive->SubQ_whatisthis=0;
- current_drive->SubQ_run_tot=current_drive->SubQ_run_trk=0;
- return (0);
- }
- }
- if (famT_drive) current_drive->SubQ_ctl_adr=infobuf[1];
- else current_drive->SubQ_ctl_adr=swap_nibbles(infobuf[1]);
- current_drive->SubQ_trk=byt2bcd(infobuf[2]);
- current_drive->SubQ_pnt_idx=byt2bcd(infobuf[3]);
- if (fam0LV_drive) i=5;
- else if (fam12_drive) i=4;
- else if (famT_drive) i=8;
- current_drive->SubQ_run_tot=make32(make16(0,infobuf[i]),make16(infobuf[i+1],infobuf[i+2])); /* msf-bin */
- i=7;
- if (fam0LV_drive) i=9;
- else if (fam12_drive) i=7;
- else if (famT_drive) i=4;
- current_drive->SubQ_run_trk=make32(make16(0,infobuf[i]),make16(infobuf[i+1],infobuf[i+2])); /* msf-bin */
- current_drive->SubQ_whatisthis=infobuf[i+3];
- current_drive->diskstate_flags |= subq_bit;
- return (0);
-}
-/*==========================================================================*/
-static int cc_ModeSense(void)
-{
- int i;
-
- if (fam2_drive) return (0);
- if (famV_drive) return (0);
- current_drive->diskstate_flags &= ~frame_size_bit;
- clr_cmdbuf();
- if (fam1_drive)
- {
- response_count=5;
- drvcmd[0]=CMD1_GETMODE;
- flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam0L_drive)
- {
- response_count=2;
- drvcmd[0]=CMD0_GETMODE;
- if (famL_drive) flags_cmd_out=f_putcmd;
- else flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
- }
- else if (famT_drive)
- {
- response_count=10;
- drvcmd[0]=CMDT_GETMODE;
- drvcmd[4]=response_count;
- }
- i=cmd_out();
- if (i<0) return (i);
- i=0;
- current_drive->sense_byte=0;
- if (fam1_drive) current_drive->sense_byte=infobuf[i++];
- else if (famT_drive)
- {
- if (infobuf[4]==0x01) current_drive->xa_byte=0x20;
- else current_drive->xa_byte=0;
- i=2;
- }
- current_drive->frame_size=make16(infobuf[i],infobuf[i+1]);
- for (i=0;i<response_count;i++)
- sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
- msgbuf[i*3]=0;
- msg(DBG_XA1,"cc_ModeSense:%s\n", msgbuf);
-
- current_drive->diskstate_flags |= frame_size_bit;
- return (0);
-}
-/*==========================================================================*/
-/*==========================================================================*/
-static int cc_ModeSelect(int framesize)
-{
- int i;
-
- if (fam2_drive) return (0);
- if (famV_drive) return (0);
- current_drive->diskstate_flags &= ~frame_size_bit;
- clr_cmdbuf();
- current_drive->frame_size=framesize;
- if (framesize==CD_FRAMESIZE_RAW) current_drive->sense_byte=0x82;
- else current_drive->sense_byte=0x00;
-
- msg(DBG_XA1,"cc_ModeSelect: %02X %04X\n",
- current_drive->sense_byte, current_drive->frame_size);
-
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_SETMODE;
- drvcmd[1]=0x00;
- drvcmd[2]=current_drive->sense_byte;
- drvcmd[3]=(current_drive->frame_size>>8)&0xFF;
- drvcmd[4]=current_drive->frame_size&0xFF;
- flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam0L_drive)
- {
- drvcmd[0]=CMD0_SETMODE;
- drvcmd[1]=0x00;
- drvcmd[2]=(current_drive->frame_size>>8)&0xFF;
- drvcmd[3]=current_drive->frame_size&0xFF;
- drvcmd[4]=0x00;
- if(famL_drive)
- flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check;
- else
- flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
- }
- else if (famT_drive)
- {
- return (-1);
- }
- response_count=0;
- i=cmd_out();
- if (i<0) return (i);
- current_drive->diskstate_flags |= frame_size_bit;
- return (0);
-}
-/*==========================================================================*/
-static int cc_GetVolume(void)
-{
- int i;
- u_char switches;
- u_char chan0=0;
- u_char vol0=0;
- u_char chan1=1;
- u_char vol1=0;
-
- if (famV_drive) return (0);
- current_drive->diskstate_flags &= ~volume_bit;
- clr_cmdbuf();
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_GETMODE;
- drvcmd[1]=0x05;
- response_count=5;
- flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_GETMODE;
- drvcmd[1]=0x0E;
- response_count=5;
- flags_cmd_out=f_putcmd;
- }
- else if (fam0L_drive)
- {
- drvcmd[0]=CMD0_GETMODE;
- drvcmd[1]=0x03;
- response_count=2;
- if(famL_drive)
- flags_cmd_out=f_putcmd;
- else
- flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
- }
- else if (famT_drive)
- {
- i=cc_get_mode_T();
- if (i<0) return (i);
- }
- if (!famT_drive)
- {
- i=cmd_out();
- if (i<0) return (i);
- }
- if (fam1_drive)
- {
- chan0=infobuf[1]&0x0F;
- vol0=infobuf[2];
- chan1=infobuf[3]&0x0F;
- vol1=infobuf[4];
- if (chan0==0)
- {
- chan0=1;
- vol0=0;
- }
- if (chan1==0)
- {
- chan1=2;
- vol1=0;
- }
- chan0 >>= 1;
- chan1 >>= 1;
- }
- else if (fam2_drive)
- {
- chan0=infobuf[1];
- vol0=infobuf[2];
- chan1=infobuf[3];
- vol1=infobuf[4];
- }
- else if (famL_drive)
- {
- chan0=0;
- chan1=1;
- vol0=vol1=infobuf[1];
- switches=infobuf[0];
- if ((switches&0x80)!=0) chan0=1;
- if ((switches&0x40)!=0) chan1=0;
- }
- else if (fam0_drive) /* different firmware levels */
- {
- chan0=0;
- chan1=1;
- vol0=vol1=infobuf[1];
- if (current_drive->drv_type>=drv_201)
- {
- if (current_drive->drv_type<drv_300)
- {
- switches=infobuf[0];
- if ((switches&0x80)!=0) vol0=0;
- if ((switches&0x40)!=0) vol1=0;
- if (current_drive->drv_type>=drv_211)
- {
- if ((switches&0x20)!=0) chan0=1;
- if ((switches&0x10)!=0) chan1=0;
- }
- }
- else
- {
- vol0=infobuf[0];
- if ((vol0&0x01)!=0) chan0=1;
- if ((vol1&0x01)==0) chan1=0;
- vol0 &= 0xFC;
- vol1 &= 0xFC;
- if (vol0!=0) vol0 += 3;
- if (vol1!=0) vol1 += 3;
- }
- }
- }
- else if (famT_drive)
- {
- current_drive->volume_control=infobuf[7];
- chan0=0;
- chan1=1;
- if (current_drive->volume_control&0x10) vol0=0;
- else vol0=0xff;
- if (current_drive->volume_control&0x20) vol1=0;
- else vol1=0xff;
- }
- current_drive->vol_chan0=chan0;
- current_drive->vol_ctrl0=vol0;
- current_drive->vol_chan1=chan1;
- current_drive->vol_ctrl1=vol1;
-#if 000
- current_drive->vol_chan2=2;
- current_drive->vol_ctrl2=0xFF;
- current_drive->vol_chan3=3;
- current_drive->vol_ctrl3=0xFF;
-#endif /* 000 */
- current_drive->diskstate_flags |= volume_bit;
- return (0);
-}
-/*==========================================================================*/
-static int cc_ReadCapacity(void)
-{
- int i, j;
-
- if (fam2_drive) return (0); /* some firmware lacks this command */
- if (famLV_drive) return (0); /* some firmware lacks this command */
- if (famT_drive) return (0); /* done with cc_ReadTocDescr() */
- current_drive->diskstate_flags &= ~cd_size_bit;
- for (j=3;j>0;j--)
- {
- clr_cmdbuf();
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_CAPACITY;
- response_count=5;
- flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
- }
-#if 00
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_CAPACITY;
- response_count=8;
- flags_cmd_out=f_putcmd;
- }
-#endif
- else if (fam0_drive)
- {
- drvcmd[0]=CMD0_CAPACITY;
- response_count=5;
- flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
- }
- i=cmd_out();
- if (i>=0) break;
- msg(DBG_000,"cc_ReadCapacity: cmd_out: err %d\n", i);
- cc_ReadError();
- }
- if (j==0) return (i);
- if (fam1_drive) current_drive->CDsize_frm=msf2blk(make32(make16(0,infobuf[0]),make16(infobuf[1],infobuf[2])))+CD_MSF_OFFSET;
- else if (fam0_drive) current_drive->CDsize_frm=make32(make16(0,infobuf[0]),make16(infobuf[1],infobuf[2]));
-#if 00
- else if (fam2_drive) current_drive->CDsize_frm=make32(make16(infobuf[0],infobuf[1]),make16(infobuf[2],infobuf[3]));
-#endif
- current_drive->diskstate_flags |= cd_size_bit;
- msg(DBG_000,"cc_ReadCapacity: %d frames.\n", current_drive->CDsize_frm);
- return (0);
-}
-/*==========================================================================*/
-static int cc_ReadTocDescr(void)
-{
- int i;
-
- current_drive->diskstate_flags &= ~toc_bit;
- clr_cmdbuf();
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_DISKINFO;
- response_count=6;
- flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam0LV_drive)
- {
- drvcmd[0]=CMD0_DISKINFO;
- response_count=6;
- if(famLV_drive)
- flags_cmd_out=f_putcmd;
- else
- flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam2_drive)
- {
- /* possibly longer timeout periods necessary */
- current_drive->f_multisession=0;
- drvcmd[0]=CMD2_DISKINFO;
- drvcmd[1]=0x02;
- drvcmd[2]=0xAB;
- drvcmd[3]=0xFF; /* session */
- response_count=8;
- flags_cmd_out=f_putcmd;
- }
- else if (famT_drive)
- {
- current_drive->f_multisession=0;
- response_count=12;
- drvcmd[0]=CMDT_DISKINFO;
- drvcmd[1]=0x02;
- drvcmd[6]=CDROM_LEADOUT;
- drvcmd[8]=response_count;
- drvcmd[9]=0x00;
- }
- i=cmd_out();
- if (i<0) return (i);
- if ((famT_drive)&&(i<response_count)) return (-100-i);
- if ((fam1_drive)||(fam2_drive)||(fam0LV_drive))
- current_drive->xa_byte=infobuf[0];
- if (fam2_drive)
- {
- current_drive->first_session=infobuf[1];
- current_drive->last_session=infobuf[2];
- current_drive->n_first_track=infobuf[3];
- current_drive->n_last_track=infobuf[4];
- if (current_drive->first_session!=current_drive->last_session)
- {
- current_drive->f_multisession=1;
- current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[5]),make16(infobuf[6],infobuf[7])));
- }
-#if 0
- if (current_drive->first_session!=current_drive->last_session)
- {
- if (current_drive->last_session<=20)
- zwanzig=current_drive->last_session+1;
- else zwanzig=20;
- for (count=current_drive->first_session;count<zwanzig;count++)
- {
- drvcmd[0]=CMD2_DISKINFO;
- drvcmd[1]=0x02;
- drvcmd[2]=0xAB;
- drvcmd[3]=count;
- response_count=8;
- flags_cmd_out=f_putcmd;
- i=cmd_out();
- if (i<0) return (i);
- current_drive->msf_multi_n[count]=make32(make16(0,infobuf[5]),make16(infobuf[6],infobuf[7]));
- }
- current_drive->diskstate_flags |= multisession_bit;
- }
-#endif
- drvcmd[0]=CMD2_DISKINFO;
- drvcmd[1]=0x02;
- drvcmd[2]=0xAA;
- drvcmd[3]=0xFF;
- response_count=5;
- flags_cmd_out=f_putcmd;
- i=cmd_out();
- if (i<0) return (i);
- current_drive->size_msf=make32(make16(0,infobuf[2]),make16(infobuf[3],infobuf[4]));
- current_drive->size_blk=msf2blk(current_drive->size_msf);
- current_drive->CDsize_frm=current_drive->size_blk+1;
- }
- else if (famT_drive)
- {
- current_drive->size_msf=make32(make16(infobuf[8],infobuf[9]),make16(infobuf[10],infobuf[11]));
- current_drive->size_blk=msf2blk(current_drive->size_msf);
- current_drive->CDsize_frm=current_drive->size_blk+1;
- current_drive->n_first_track=infobuf[2];
- current_drive->n_last_track=infobuf[3];
- }
- else
- {
- current_drive->n_first_track=infobuf[1];
- current_drive->n_last_track=infobuf[2];
- current_drive->size_msf=make32(make16(0,infobuf[3]),make16(infobuf[4],infobuf[5]));
- current_drive->size_blk=msf2blk(current_drive->size_msf);
- if (famLV_drive) current_drive->CDsize_frm=current_drive->size_blk+1;
- }
- current_drive->diskstate_flags |= toc_bit;
- msg(DBG_TOC,"TocDesc: xa %02X firstt %02X lastt %02X size %08X firstses %02X lastsess %02X\n",
- current_drive->xa_byte,
- current_drive->n_first_track,
- current_drive->n_last_track,
- current_drive->size_msf,
- current_drive->first_session,
- current_drive->last_session);
- return (0);
-}
-/*==========================================================================*/
-static int cc_ReadTocEntry(int num)
-{
- int i;
-
- clr_cmdbuf();
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_READTOC;
- drvcmd[2]=num;
- response_count=8;
- flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam2_drive)
- {
- /* possibly longer timeout periods necessary */
- drvcmd[0]=CMD2_DISKINFO;
- drvcmd[1]=0x02;
- drvcmd[2]=num;
- response_count=5;
- flags_cmd_out=f_putcmd;
- }
- else if (fam0LV_drive)
- {
- drvcmd[0]=CMD0_READTOC;
- drvcmd[1]=0x02;
- drvcmd[2]=num;
- response_count=8;
- if (famLV_drive)
- flags_cmd_out=f_putcmd;
- else
- flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
- }
- else if (famT_drive)
- {
- response_count=12;
- drvcmd[0]=CMDT_DISKINFO;
- drvcmd[1]=0x02;
- drvcmd[6]=num;
- drvcmd[8]=response_count;
- drvcmd[9]=0x00;
- }
- i=cmd_out();
- if (i<0) return (i);
- if ((famT_drive)&&(i<response_count)) return (-100-i);
- if ((fam1_drive)||(fam0LV_drive))
- {
- current_drive->TocEnt_nixbyte=infobuf[0];
- i=1;
- }
- else if (fam2_drive) i=0;
- else if (famT_drive) i=5;
- current_drive->TocEnt_ctl_adr=swap_nibbles(infobuf[i++]);
- if ((fam1_drive)||(fam0L_drive))
- {
- current_drive->TocEnt_number=infobuf[i++];
- current_drive->TocEnt_format=infobuf[i];
- }
- else
- {
- current_drive->TocEnt_number=num;
- current_drive->TocEnt_format=0;
- }
- if (fam1_drive) i=4;
- else if (fam0LV_drive) i=5;
- else if (fam2_drive) i=2;
- else if (famT_drive) i=9;
- current_drive->TocEnt_address=make32(make16(0,infobuf[i]),
- make16(infobuf[i+1],infobuf[i+2]));
- for (i=0;i<response_count;i++)
- sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
- msgbuf[i*3]=0;
- msg(DBG_ECS,"TocEntry:%s\n", msgbuf);
- msg(DBG_TOC,"TocEntry: %02X %02X %02X %02X %08X\n",
- current_drive->TocEnt_nixbyte, current_drive->TocEnt_ctl_adr,
- current_drive->TocEnt_number, current_drive->TocEnt_format,
- current_drive->TocEnt_address);
- return (0);
-}
-/*==========================================================================*/
-static int cc_ReadPacket(void)
-{
- int i;
-
- clr_cmdbuf();
- drvcmd[0]=CMD0_PACKET;
- drvcmd[1]=response_count;
- if(famL_drive) flags_cmd_out=f_putcmd;
- else if (fam01_drive)
- flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
- else if (fam2_drive) return (-1); /* not implemented yet */
- else if (famT_drive)
- {
- return (-1);
- }
- i=cmd_out();
- return (i);
-}
-/*==========================================================================*/
-static int convert_UPC(u_char *p)
-{
- int i;
-
- p++;
- if (fam0L_drive) p[13]=0;
- for (i=0;i<7;i++)
- {
- if (fam1_drive) current_drive->UPC_buf[i]=swap_nibbles(*p++);
- else if (fam0L_drive)
- {
- current_drive->UPC_buf[i]=((*p++)<<4)&0xFF;
- current_drive->UPC_buf[i] |= *p++;
- }
- else if (famT_drive)
- {
- return (-1);
- }
- else /* CD200 */
- {
- return (-1);
- }
- }
- current_drive->UPC_buf[6] &= 0xF0;
- return (0);
-}
-/*==========================================================================*/
-static int cc_ReadUPC(void)
-{
- int i;
-#if TEST_UPC
- int block, checksum;
-#endif /* TEST_UPC */
-
- if (fam2_drive) return (0); /* not implemented yet */
- if (famT_drive) return (0); /* not implemented yet */
- if (famV_drive) return (0); /* not implemented yet */
-#if 1
- if (fam0_drive) return (0); /* but it should work */
-#endif
-
- current_drive->diskstate_flags &= ~upc_bit;
-#if TEST_UPC
- for (block=CD_MSF_OFFSET+1;block<CD_MSF_OFFSET+200;block++)
- {
-#endif /* TEST_UPC */
- clr_cmdbuf();
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_READ_UPC;
-#if TEST_UPC
- drvcmd[1]=(block>>16)&0xFF;
- drvcmd[2]=(block>>8)&0xFF;
- drvcmd[3]=block&0xFF;
-#endif /* TEST_UPC */
- response_count=8;
- flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam0L_drive)
- {
- drvcmd[0]=CMD0_READ_UPC;
-#if TEST_UPC
- drvcmd[2]=(block>>16)&0xFF;
- drvcmd[3]=(block>>8)&0xFF;
- drvcmd[4]=block&0xFF;
-#endif /* TEST_UPC */
- response_count=0;
- flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
- }
- else if (fam2_drive)
- {
- return (-1);
- }
- else if (famT_drive)
- {
- return (-1);
- }
- i=cmd_out();
- if (i<0)
- {
- msg(DBG_000,"cc_ReadUPC cmd_out: err %d\n", i);
- return (i);
- }
- if (fam0L_drive)
- {
- response_count=16;
- if (famL_drive) flags_cmd_out=f_putcmd;
- i=cc_ReadPacket();
- if (i<0)
- {
- msg(DBG_000,"cc_ReadUPC ReadPacket: err %d\n", i);
- return (i);
- }
- }
-#if TEST_UPC
- checksum=0;
-#endif /* TEST_UPC */
- for (i=0;i<(fam1_drive?8:16);i++)
- {
-#if TEST_UPC
- checksum |= infobuf[i];
-#endif /* TEST_UPC */
- sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
- }
- msgbuf[i*3]=0;
- msg(DBG_UPC,"UPC info:%s\n", msgbuf);
-#if TEST_UPC
- if ((checksum&0x7F)!=0) break;
- }
-#endif /* TEST_UPC */
- current_drive->UPC_ctl_adr=0;
- if (fam1_drive) i=0;
- else i=2;
- if ((infobuf[i]&0x80)!=0)
- {
- convert_UPC(&infobuf[i]);
- current_drive->UPC_ctl_adr = (current_drive->TocEnt_ctl_adr & 0xF0) | 0x02;
- }
- for (i=0;i<7;i++)
- sprintf(&msgbuf[i*3], " %02X", current_drive->UPC_buf[i]);
- sprintf(&msgbuf[i*3], " (%02X)", current_drive->UPC_ctl_adr);
- msgbuf[i*3+5]=0;
- msg(DBG_UPC,"UPC code:%s\n", msgbuf);
- current_drive->diskstate_flags |= upc_bit;
- return (0);
-}
-
-static int sbpcd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
-{
- int i;
- unsigned char *mcnp = mcn->medium_catalog_number;
- unsigned char *resp;
-
- current_drive->diskstate_flags &= ~upc_bit;
- clr_cmdbuf();
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_READ_UPC;
- response_count=8;
- flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
- }
- else if (fam0L_drive)
- {
- drvcmd[0]=CMD0_READ_UPC;
- response_count=0;
- flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
- }
- else if (fam2_drive)
- {
- return (-1);
- }
- else if (famT_drive)
- {
- return (-1);
- }
- i=cmd_out();
- if (i<0)
- {
- msg(DBG_000,"cc_ReadUPC cmd_out: err %d\n", i);
- return (i);
- }
- if (fam0L_drive)
- {
- response_count=16;
- if (famL_drive) flags_cmd_out=f_putcmd;
- i=cc_ReadPacket();
- if (i<0)
- {
- msg(DBG_000,"cc_ReadUPC ReadPacket: err %d\n", i);
- return (i);
- }
- }
- current_drive->UPC_ctl_adr=0;
- if (fam1_drive) i=0;
- else i=2;
-
- resp = infobuf + i;
- if (*resp++ == 0x80) {
- /* packed bcd to single ASCII digits */
- *mcnp++ = (*resp >> 4) + '0';
- *mcnp++ = (*resp++ & 0x0f) + '0';
- *mcnp++ = (*resp >> 4) + '0';
- *mcnp++ = (*resp++ & 0x0f) + '0';
- *mcnp++ = (*resp >> 4) + '0';
- *mcnp++ = (*resp++ & 0x0f) + '0';
- *mcnp++ = (*resp >> 4) + '0';
- *mcnp++ = (*resp++ & 0x0f) + '0';
- *mcnp++ = (*resp >> 4) + '0';
- *mcnp++ = (*resp++ & 0x0f) + '0';
- *mcnp++ = (*resp >> 4) + '0';
- *mcnp++ = (*resp++ & 0x0f) + '0';
- *mcnp++ = (*resp >> 4) + '0';
- }
- *mcnp = '\0';
-
- current_drive->diskstate_flags |= upc_bit;
- return (0);
-}
-
-/*==========================================================================*/
-static int cc_CheckMultiSession(void)
-{
- int i;
-
- if (fam2_drive) return (0);
- current_drive->f_multisession=0;
- current_drive->lba_multi=0;
- if (fam0_drive) return (0);
- clr_cmdbuf();
- if (fam1_drive)
- {
- drvcmd[0]=CMD1_MULTISESS;
- response_count=6;
- flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
- i=cmd_out();
- if (i<0) return (i);
- if ((infobuf[0]&0x80)!=0)
- {
- current_drive->f_multisession=1;
- current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[1]),
- make16(infobuf[2],infobuf[3])));
- }
- }
- else if (famLV_drive)
- {
- drvcmd[0]=CMDL_MULTISESS;
- drvcmd[1]=3;
- drvcmd[2]=1;
- response_count=8;
- flags_cmd_out=f_putcmd;
- i=cmd_out();
- if (i<0) return (i);
- current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[5]),
- make16(infobuf[6],infobuf[7])));
- }
- else if (famT_drive)
- {
- response_count=12;
- drvcmd[0]=CMDT_DISKINFO;
- drvcmd[1]=0x02;
- drvcmd[6]=0;
- drvcmd[8]=response_count;
- drvcmd[9]=0x40;
- i=cmd_out();
- if (i<0) return (i);
- if (i<response_count) return (-100-i);
- current_drive->first_session=infobuf[2];
- current_drive->last_session=infobuf[3];
- current_drive->track_of_last_session=infobuf[6];
- if (current_drive->first_session!=current_drive->last_session)
- {
- current_drive->f_multisession=1;
- current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[9]),make16(infobuf[10],infobuf[11])));
- }
- }
- for (i=0;i<response_count;i++)
- sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
- msgbuf[i*3]=0;
- msg(DBG_MUL,"MultiSession Info:%s (%d)\n", msgbuf, current_drive->lba_multi);
- if (current_drive->lba_multi>200)
- {
- current_drive->f_multisession=1;
- msg(DBG_MUL,"MultiSession base: %06X\n", current_drive->lba_multi);
- }
- return (0);
-}
-/*==========================================================================*/
-#ifdef FUTURE
-static int cc_SubChanInfo(int frame, int count, u_char *buffer)
- /* "frame" is a RED BOOK (msf-bin) address */
-{
- int i;
-
- if (fam0LV_drive) return (-ENOSYS); /* drive firmware lacks it */
- if (famT_drive)
- {
- return (-1);
- }
-#if 0
- if (current_drive->audio_state!=audio_playing) return (-ENODATA);
-#endif
- clr_cmdbuf();
- drvcmd[0]=CMD1_SUBCHANINF;
- drvcmd[1]=(frame>>16)&0xFF;
- drvcmd[2]=(frame>>8)&0xFF;
- drvcmd[3]=frame&0xFF;
- drvcmd[5]=(count>>8)&0xFF;
- drvcmd[6]=count&0xFF;
- flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
- cmd_type=READ_SC;
- current_drive->frame_size=CD_FRAMESIZE_SUB;
- i=cmd_out(); /* which buffer to use? */
- return (i);
-}
-#endif /* FUTURE */
-/*==========================================================================*/
-static void __init check_datarate(void)
-{
- int i=0;
-
- msg(DBG_IOX,"check_datarate entered.\n");
- datarate=0;
-#if TEST_STI
- for (i=0;i<=1000;i++) printk(".");
-#endif
- /* set a timer to make (timed_out_delay!=0) after 1.1 seconds */
-#if 1
- del_timer(&delay_timer);
-#endif
- delay_timer.expires=jiffies+11*HZ/10;
- timed_out_delay=0;
- add_timer(&delay_timer);
-#if 0
- msg(DBG_TIM,"delay timer started (11*HZ/10).\n");
-#endif
- do
- {
- i=inb(CDi_status);
- datarate++;
-#if 1
- if (datarate>0x6FFFFFFF) break;
-#endif
- }
- while (!timed_out_delay);
- del_timer(&delay_timer);
-#if 0
- msg(DBG_TIM,"datarate: %04X\n", datarate);
-#endif
- if (datarate<65536) datarate=65536;
- maxtim16=datarate*16;
- maxtim04=datarate*4;
- maxtim02=datarate*2;
- maxtim_8=datarate/32;
-#if LONG_TIMING
- maxtim_data=datarate/100;
-#else
- maxtim_data=datarate/300;
-#endif /* LONG_TIMING */
-#if 0
- msg(DBG_TIM,"maxtim_8 %d, maxtim_data %d.\n", maxtim_8, maxtim_data);
-#endif
-}
-/*==========================================================================*/
-#if 0
-static int c2_ReadError(int fam)
-{
- int i;
-
- clr_cmdbuf();
- response_count=9;
- clr_respo_buf(9);
- if (fam==1)
- {
- drvcmd[0]=CMD0_READ_ERR; /* same as CMD1_ and CMDL_ */
- i=do_cmd(f_putcmd|f_lopsta|f_getsta|f_ResponseStatus);
- }
- else if (fam==2)
- {
- drvcmd[0]=CMD2_READ_ERR;
- i=do_cmd(f_putcmd);
- }
- else return (-1);
- return (i);
-}
-#endif
-/*==========================================================================*/
-static void __init ask_mail(void)
-{
- int i;
-
- msg(DBG_INF, "please mail the following lines to emoenke@gwdg.de\n");
- msg(DBG_INF, "(don't mail if you are not using the actual kernel):\n");
- msg(DBG_INF, "%s\n", VERSION);
- msg(DBG_INF, "address %03X, type %s, drive %s (ID %d)\n",
- CDo_command, type, current_drive->drive_model, current_drive->drv_id);
- for (i=0;i<12;i++)
- sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
- msgbuf[i*3]=0;
- msg(DBG_INF,"infobuf =%s\n", msgbuf);
- for (i=0;i<12;i++)
- sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
- msgbuf[i*3]=0;
- msg(DBG_INF,"infobuf =%s\n", msgbuf);
-}
-/*==========================================================================*/
-static int __init check_version(void)
-{
- int i, j, l;
- int teac_possible=0;
-
- msg(DBG_INI,"check_version: id=%d, d=%d.\n", current_drive->drv_id, current_drive - D_S);
- current_drive->drv_type=0;
-
- /* check for CR-52x, CR-56x, LCS-7260 and ECS-AT */
- /* clear any pending error state */
- clr_cmdbuf();
- drvcmd[0]=CMD0_READ_ERR; /* same as CMD1_ and CMDL_ */
- response_count=9;
- flags_cmd_out=f_putcmd;
- i=cmd_out();
- if (i<0) msg(DBG_INI,"CMD0_READ_ERR returns %d (ok anyway).\n",i);
- /* read drive version */
- clr_cmdbuf();
- for (i=0;i<12;i++) infobuf[i]=0;
- drvcmd[0]=CMD0_READ_VER; /* same as CMD1_ and CMDL_ */
- response_count=12; /* fam1: only 11 */
- flags_cmd_out=f_putcmd;
- i=cmd_out();
- if (i<-1) msg(DBG_INI,"CMD0_READ_VER returns %d\n",i);
- if (i==-11) teac_possible++;
- j=0;
- for (i=0;i<12;i++) j+=infobuf[i];
- if (j)
- {
- for (i=0;i<12;i++)
- sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
- msgbuf[i*3]=0;
- msg(DBG_ECS,"infobuf =%s\n", msgbuf);
- for (i=0;i<12;i++)
- sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
- msgbuf[i*3]=0;
- msg(DBG_ECS,"infobuf =%s\n", msgbuf);
- }
- for (i=0;i<4;i++) if (infobuf[i]!=family1[i]) break;
- if (i==4)
- {
- current_drive->drive_model[0]='C';
- current_drive->drive_model[1]='R';
- current_drive->drive_model[2]='-';
- current_drive->drive_model[3]='5';
- current_drive->drive_model[4]=infobuf[i++];
- current_drive->drive_model[5]=infobuf[i++];
- current_drive->drive_model[6]=0;
- current_drive->drv_type=drv_fam1;
- }
- if (!current_drive->drv_type)
- {
- for (i=0;i<8;i++) if (infobuf[i]!=family0[i]) break;
- if (i==8)
- {
- current_drive->drive_model[0]='C';
- current_drive->drive_model[1]='R';
- current_drive->drive_model[2]='-';
- current_drive->drive_model[3]='5';
- current_drive->drive_model[4]='2';
- current_drive->drive_model[5]='x';
- current_drive->drive_model[6]=0;
- current_drive->drv_type=drv_fam0;
- }
- }
- if (!current_drive->drv_type)
- {
- for (i=0;i<8;i++) if (infobuf[i]!=familyL[i]) break;
- if (i==8)
- {
- for (j=0;j<8;j++)
- current_drive->drive_model[j]=infobuf[j];
- current_drive->drive_model[8]=0;
- current_drive->drv_type=drv_famL;
- }
- }
- if (!current_drive->drv_type)
- {
- for (i=0;i<6;i++) if (infobuf[i]!=familyV[i]) break;
- if (i==6)
- {
- for (j=0;j<6;j++)
- current_drive->drive_model[j]=infobuf[j];
- current_drive->drive_model[6]=0;
- current_drive->drv_type=drv_famV;
- i+=2; /* 2 blanks before version */
- }
- }
- if (!current_drive->drv_type)
- {
- /* check for CD200 */
- clr_cmdbuf();
- drvcmd[0]=CMD2_READ_ERR;
- response_count=9;
- flags_cmd_out=f_putcmd;
- i=cmd_out();
- if (i<0) msg(DBG_INI,"CMD2_READERR returns %d (ok anyway).\n",i);
- if (i<0) msg(DBG_000,"CMD2_READERR returns %d (ok anyway).\n",i);
- /* read drive version */
- clr_cmdbuf();
- for (i=0;i<12;i++) infobuf[i]=0;
- if (sbpro_type==1) OUT(CDo_sel_i_d,0);
-#if 0
- OUT(CDo_reset,0);
- sbp_sleep(6*HZ);
- OUT(CDo_enable,current_drive->drv_sel);
-#endif
- drvcmd[0]=CMD2_READ_VER;
- response_count=12;
- flags_cmd_out=f_putcmd;
- i=cmd_out();
- if (i<0) msg(DBG_INI,"CMD2_READ_VER returns %d\n",i);
- if (i==-7) teac_possible++;
- j=0;
- for (i=0;i<12;i++) j+=infobuf[i];
- if (j)
- {
- for (i=0;i<12;i++)
- sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
- msgbuf[i*3]=0;
- msg(DBG_IDX,"infobuf =%s\n", msgbuf);
- for (i=0;i<12;i++)
- sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
- msgbuf[i*3]=0;
- msg(DBG_IDX,"infobuf =%s\n", msgbuf);
- }
- if (i>=0)
- {
- for (i=0;i<5;i++) if (infobuf[i]!=family2[i]) break;
- if (i==5)
- {
- current_drive->drive_model[0]='C';
- current_drive->drive_model[1]='D';
- current_drive->drive_model[2]='2';
- current_drive->drive_model[3]='0';
- current_drive->drive_model[4]='0';
- current_drive->drive_model[5]=infobuf[i++];
- current_drive->drive_model[6]=infobuf[i++];
- current_drive->drive_model[7]=0;
- current_drive->drv_type=drv_fam2;
- }
- }
- }
- if (!current_drive->drv_type)
- {
- /* check for TEAC CD-55A */
- msg(DBG_TEA,"teac_possible: %d\n",teac_possible);
- for (j=1;j<=((current_drive->drv_id==0)?3:1);j++)
- {
- for (l=1;l<=((current_drive->drv_id==0)?10:1);l++)
- {
- msg(DBG_TEA,"TEAC reset #%d-%d.\n", j, l);
- if (sbpro_type==1) OUT(CDo_reset,0);
- else
- {
- OUT(CDo_enable,current_drive->drv_sel);
- OUT(CDo_sel_i_d,0);
- OUT(CDo_command,CMDT_RESET);
- for (i=0;i<9;i++) OUT(CDo_command,0);
- }
- sbp_sleep(5*HZ/10);
- OUT(CDo_enable,current_drive->drv_sel);
- OUT(CDo_sel_i_d,0);
- i=inb(CDi_status);
- msg(DBG_TEA,"TEAC CDi_status: %02X.\n",i);
-#if 0
- if (i&s_not_result_ready) continue; /* drive not present or ready */
-#endif
- i=inb(CDi_info);
- msg(DBG_TEA,"TEAC CDi_info: %02X.\n",i);
- if (i==0x55) break; /* drive found */
- }
- if (i==0x55) break; /* drive found */
- }
- if (i==0x55) /* drive found */
- {
- msg(DBG_TEA,"TEAC drive found.\n");
- clr_cmdbuf();
- flags_cmd_out=f_putcmd;
- response_count=12;
- drvcmd[0]=CMDT_READ_VER;
- drvcmd[4]=response_count;
- for (i=0;i<12;i++) infobuf[i]=0;
- i=cmd_out_T();
- if (i!=0) msg(DBG_TEA,"cmd_out_T(CMDT_READ_VER) returns %d.\n",i);
- for (i=1;i<6;i++) if (infobuf[i]!=familyT[i-1]) break;
- if (i==6)
- {
- current_drive->drive_model[0]='C';
- current_drive->drive_model[1]='D';
- current_drive->drive_model[2]='-';
- current_drive->drive_model[3]='5';
- current_drive->drive_model[4]='5';
- current_drive->drive_model[5]=0;
- current_drive->drv_type=drv_famT;
- }
- }
- }
- if (!current_drive->drv_type)
- {
- msg(DBG_TEA,"no drive found at address %03X under ID %d.\n",CDo_command,current_drive->drv_id);
- return (-522);
- }
- for (j=0;j<4;j++) current_drive->firmware_version[j]=infobuf[i+j];
- if (famL_drive)
- {
- u_char lcs_firm_e1[]="A E1";
- u_char lcs_firm_f4[]="A4F4";
-
- for (j=0;j<4;j++)
- if (current_drive->firmware_version[j]!=lcs_firm_e1[j]) break;
- if (j==4) current_drive->drv_type=drv_e1;
-
- for (j=0;j<4;j++)
- if (current_drive->firmware_version[j]!=lcs_firm_f4[j]) break;
- if (j==4) current_drive->drv_type=drv_f4;
-
- if (current_drive->drv_type==drv_famL) ask_mail();
- }
- else if (famT_drive)
- {
- j=infobuf[4]; /* one-byte version??? - here: 0x15 */
- if (j=='5')
- {
- current_drive->firmware_version[0]=infobuf[7];
- current_drive->firmware_version[1]=infobuf[8];
- current_drive->firmware_version[2]=infobuf[10];
- current_drive->firmware_version[3]=infobuf[11];
- }
- else
- {
- if (j!=0x15) ask_mail();
- current_drive->firmware_version[0]='0';
- current_drive->firmware_version[1]='.';
- current_drive->firmware_version[2]='0'+(j>>4);
- current_drive->firmware_version[3]='0'+(j&0x0f);
- }
- }
- else /* CR-52x, CR-56x, CD200, ECS-AT */
- {
- j = (current_drive->firmware_version[0] & 0x0F) * 100 +
- (current_drive->firmware_version[2] & 0x0F) *10 +
- (current_drive->firmware_version[3] & 0x0F);
- if (fam0_drive)
- {
- if (j<200) current_drive->drv_type=drv_199;
- else if (j<201) current_drive->drv_type=drv_200;
- else if (j<210) current_drive->drv_type=drv_201;
- else if (j<211) current_drive->drv_type=drv_210;
- else if (j<300) current_drive->drv_type=drv_211;
- else if (j>=300) current_drive->drv_type=drv_300;
- }
- else if (fam1_drive)
- {
- if (j<100) current_drive->drv_type=drv_099;
- else
- {
- current_drive->drv_type=drv_100;
- if ((j!=500)&&(j!=102)) ask_mail();
- }
- }
- else if (fam2_drive)
- {
- if (current_drive->drive_model[5]=='F')
- {
- if ((j!=1)&&(j!=35)&&(j!=200)&&(j!=210))
- ask_mail(); /* unknown version at time */
- }
- else
- {
- msg(DBG_INF,"this CD200 drive is not fully supported yet - only audio will work.\n");
- if ((j!=101)&&(j!=35))
- ask_mail(); /* unknown version at time */
- }
- }
- else if (famV_drive)
- {
- if ((j==100)||(j==150)) current_drive->drv_type=drv_at;
- ask_mail(); /* hopefully we get some feedback by this */
- }
- }
- msg(DBG_LCS,"drive type %02X\n",current_drive->drv_type);
- msg(DBG_INI,"check_version done.\n");
- return (0);
-}
-/*==========================================================================*/
-static void switch_drive(struct sbpcd_drive *p)
-{
- current_drive = p;
- OUT(CDo_enable,current_drive->drv_sel);
- msg(DBG_DID,"drive %d (ID=%d) activated.\n",
- current_drive - D_S, current_drive->drv_id);
- return;
-}
-/*==========================================================================*/
-#ifdef PATH_CHECK
-/*
- * probe for the presence of an interface card
- */
-static int __init check_card(int port)
-{
-#undef N_RESPO
-#define N_RESPO 20
- int i, j, k;
- u_char response[N_RESPO];
- u_char save_port0;
- u_char save_port3;
-
- msg(DBG_INI,"check_card entered.\n");
- save_port0=inb(port+0);
- save_port3=inb(port+3);
-
- for (j=0;j<NR_SBPCD;j++)
- {
- OUT(port+3,j) ; /* enable drive #j */
- OUT(port+0,CMD0_PATH_CHECK);
- for (i=10;i>0;i--) OUT(port+0,0);
- for (k=0;k<N_RESPO;k++) response[k]=0;
- for (k=0;k<N_RESPO;k++)
- {
- for (i=10000;i>0;i--)
- {
- if (inb(port+1)&s_not_result_ready) continue;
- response[k]=inb(port+0);
- break;
- }
- }
- for (i=0;i<N_RESPO;i++)
- sprintf(&msgbuf[i*3], " %02X", response[i]);
- msgbuf[i*3]=0;
- msg(DBG_TEA,"path check 00 (%d): %s\n", j, msgbuf);
- OUT(port+0,CMD0_PATH_CHECK);
- for (i=10;i>0;i--) OUT(port+0,0);
- for (k=0;k<N_RESPO;k++) response[k]=0xFF;
- for (k=0;k<N_RESPO;k++)
- {
- for (i=10000;i>0;i--)
- {
- if (inb(port+1)&s_not_result_ready) continue;
- response[k]=inb(port+0);
- break;
- }
- }
- for (i=0;i<N_RESPO;i++)
- sprintf(&msgbuf[i*3], " %02X", response[i]);
- msgbuf[i*3]=0;
- msg(DBG_TEA,"path check 00 (%d): %s\n", j, msgbuf);
-
- if (response[0]==0xAA)
- if (response[1]==0x55)
- return (0);
- }
- for (j=0;j<NR_SBPCD;j++)
- {
- OUT(port+3,j) ; /* enable drive #j */
- OUT(port+0,CMD2_READ_VER);
- for (i=10;i>0;i--) OUT(port+0,0);
- for (k=0;k<N_RESPO;k++) response[k]=0;
- for (k=0;k<N_RESPO;k++)
- {
- for (i=1000000;i>0;i--)
- {
- if (inb(port+1)&s_not_result_ready) continue;
- response[k]=inb(port+0);
- break;
- }
- }
- for (i=0;i<N_RESPO;i++)
- sprintf(&msgbuf[i*3], " %02X", response[i]);
- msgbuf[i*3]=0;
- msg(DBG_TEA,"path check 12 (%d): %s\n", j, msgbuf);
-
- OUT(port+0,CMD2_READ_VER);
- for (i=10;i>0;i--) OUT(port+0,0);
- for (k=0;k<N_RESPO;k++) response[k]=0xFF;
- for (k=0;k<N_RESPO;k++)
- {
- for (i=1000000;i>0;i--)
- {
- if (inb(port+1)&s_not_result_ready) continue;
- response[k]=inb(port+0);
- break;
- }
- }
- for (i=0;i<N_RESPO;i++)
- sprintf(&msgbuf[i*3], " %02X", response[i]);
- msgbuf[i*3]=0;
- msg(DBG_TEA,"path check 12 (%d): %s\n", j, msgbuf);
-
- if (response[0]==0xAA)
- if (response[1]==0x55)
- return (0);
- }
- OUT(port+0,save_port0);
- OUT(port+3,save_port3);
- return (0); /* in any case - no real "function" at time */
-}
-#endif /* PATH_CHECK */
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * probe for the presence of drives on the selected controller
- */
-static int __init check_drives(void)
-{
- int i, j;
-
- msg(DBG_INI,"check_drives entered.\n");
- ndrives=0;
- for (j=0;j<max_drives;j++)
- {
- struct sbpcd_drive *p = D_S + ndrives;
- p->drv_id=j;
- if (sbpro_type==1) p->drv_sel=(j&0x01)<<1|(j&0x02)>>1;
- else p->drv_sel=j;
- switch_drive(p);
- msg(DBG_INI,"check_drives: drive %d (ID=%d) activated.\n",ndrives,j);
- msg(DBG_000,"check_drives: drive %d (ID=%d) activated.\n",ndrives,j);
- i=check_version();
- if (i<0) msg(DBG_INI,"check_version returns %d.\n",i);
- else
- {
- current_drive->drv_options=drv_pattern[j];
- if (fam0L_drive) current_drive->drv_options&=~(speed_auto|speed_300|speed_150);
- msg(DBG_INF, "Drive %d (ID=%d): %.9s (%.4s) at 0x%03X (type %d)\n",
- current_drive - D_S,
- current_drive->drv_id,
- current_drive->drive_model,
- current_drive->firmware_version,
- CDo_command,
- sbpro_type);
- ndrives++;
- }
- }
- for (j=ndrives;j<NR_SBPCD;j++) D_S[j].drv_id=-1;
- if (ndrives==0) return (-1);
- return (0);
-}
-/*==========================================================================*/
-#ifdef FUTURE
-/*
- * obtain if requested service disturbs current audio state
- */
-static int obey_audio_state(u_char audio_state, u_char func,u_char subfunc)
-{
- switch (audio_state) /* audio status from controller */
- {
- case aud_11: /* "audio play in progress" */
- case audx11:
- switch (func) /* DOS command code */
- {
- case cmd_07: /* input flush */
- case cmd_0d: /* open device */
- case cmd_0e: /* close device */
- case cmd_0c: /* ioctl output */
- return (1);
- case cmd_03: /* ioctl input */
- switch (subfunc)
- /* DOS ioctl input subfunction */
- {
- case cxi_00:
- case cxi_06:
- case cxi_09:
- return (1);
- default:
- return (ERROR15);
- }
- return (1);
- default:
- return (ERROR15);
- }
- return (1);
- case aud_12: /* "audio play paused" */
- case audx12:
- return (1);
- default:
- return (2);
- }
-}
-/*==========================================================================*/
-/* allowed is only
- * ioctl_o, flush_input, open_device, close_device,
- * tell_address, tell_volume, tell_capabiliti,
- * tell_framesize, tell_CD_changed, tell_audio_posi
- */
-static int check_allowed1(u_char func1, u_char func2)
-{
-#if 000
- if (func1==ioctl_o) return (0);
- if (func1==read_long) return (-1);
- if (func1==read_long_prefetch) return (-1);
- if (func1==seek) return (-1);
- if (func1==audio_play) return (-1);
- if (func1==audio_pause) return (-1);
- if (func1==audio_resume) return (-1);
- if (func1!=ioctl_i) return (0);
- if (func2==tell_SubQ_run_tot) return (-1);
- if (func2==tell_cdsize) return (-1);
- if (func2==tell_TocDescrip) return (-1);
- if (func2==tell_TocEntry) return (-1);
- if (func2==tell_subQ_info) return (-1);
- if (fam1_drive) if (func2==tell_SubChanInfo) return (-1);
- if (func2==tell_UPC) return (-1);
-#else
- return (0);
-#endif
-}
-/*==========================================================================*/
-static int check_allowed2(u_char func1, u_char func2)
-{
-#if 000
- if (func1==read_long) return (-1);
- if (func1==read_long_prefetch) return (-1);
- if (func1==seek) return (-1);
- if (func1==audio_play) return (-1);
- if (func1!=ioctl_o) return (0);
- if (fam1_drive)
- {
- if (func2==EjectDisk) return (-1);
- if (func2==CloseTray) return (-1);
- }
-#else
- return (0);
-#endif
-}
-/*==========================================================================*/
-static int check_allowed3(u_char func1, u_char func2)
-{
-#if 000
- if (func1==ioctl_i)
- {
- if (func2==tell_address) return (0);
- if (func2==tell_capabiliti) return (0);
- if (func2==tell_CD_changed) return (0);
- if (fam0L_drive) if (func2==tell_SubChanInfo) return (0);
- return (-1);
- }
- if (func1==ioctl_o)
- {
- if (func2==DriveReset) return (0);
- if (fam0L_drive)
- {
- if (func2==EjectDisk) return (0);
- if (func2==LockDoor) return (0);
- if (func2==CloseTray) return (0);
- }
- return (-1);
- }
- if (func1==flush_input) return (-1);
- if (func1==read_long) return (-1);
- if (func1==read_long_prefetch) return (-1);
- if (func1==seek) return (-1);
- if (func1==audio_play) return (-1);
- if (func1==audio_pause) return (-1);
- if (func1==audio_resume) return (-1);
-#else
- return (0);
-#endif
-}
-/*==========================================================================*/
-static int seek_pos_audio_end(void)
-{
- int i;
-
- i=msf2blk(current_drive->pos_audio_end)-1;
- if (i<0) return (-1);
- i=cc_Seek(i,0);
- return (i);
-}
-#endif /* FUTURE */
-/*==========================================================================*/
-static int ReadToC(void)
-{
- int i, j;
- current_drive->diskstate_flags &= ~toc_bit;
- current_drive->ored_ctl_adr=0;
- /* special handling of CD-I HE */
- if ((current_drive->n_first_track == 2 && current_drive->n_last_track == 2) ||
- current_drive->xa_byte == 0x10)
- {
- current_drive->TocBuffer[1].nixbyte=0;
- current_drive->TocBuffer[1].ctl_adr=0x40;
- current_drive->TocBuffer[1].number=1;
- current_drive->TocBuffer[1].format=0;
- current_drive->TocBuffer[1].address=blk2msf(0);
- current_drive->ored_ctl_adr |= 0x40;
- current_drive->n_first_track = 1;
- current_drive->n_last_track = 1;
- current_drive->xa_byte = 0x10;
- j = 2;
- } else
- for (j=current_drive->n_first_track;j<=current_drive->n_last_track;j++)
- {
- i=cc_ReadTocEntry(j);
- if (i<0)
- {
- msg(DBG_INF,"cc_ReadTocEntry(%d) returns %d.\n",j,i);
- return (i);
- }
- current_drive->TocBuffer[j].nixbyte=current_drive->TocEnt_nixbyte;
- current_drive->TocBuffer[j].ctl_adr=current_drive->TocEnt_ctl_adr;
- current_drive->TocBuffer[j].number=current_drive->TocEnt_number;
- current_drive->TocBuffer[j].format=current_drive->TocEnt_format;
- current_drive->TocBuffer[j].address=current_drive->TocEnt_address;
- current_drive->ored_ctl_adr |= current_drive->TocEnt_ctl_adr;
- }
- /* fake entry for LeadOut Track */
- current_drive->TocBuffer[j].nixbyte=0;
- current_drive->TocBuffer[j].ctl_adr=0;
- current_drive->TocBuffer[j].number=CDROM_LEADOUT;
- current_drive->TocBuffer[j].format=0;
- current_drive->TocBuffer[j].address=current_drive->size_msf;
-
- current_drive->diskstate_flags |= toc_bit;
- return (0);
-}
-/*==========================================================================*/
-static int DiskInfo(void)
-{
- int i, j;
-
- current_drive->mode=READ_M1;
-
-#undef LOOP_COUNT
-#define LOOP_COUNT 10 /* needed for some "old" drives */
-
- msg(DBG_000,"DiskInfo entered.\n");
- for (j=1;j<LOOP_COUNT;j++)
- {
-#if 0
- i=SetSpeed();
- if (i<0)
- {
- msg(DBG_INF,"DiskInfo: SetSpeed returns %d\n", i);
- continue;
- }
- i=cc_ModeSense();
- if (i<0)
- {
- msg(DBG_INF,"DiskInfo: cc_ModeSense returns %d\n", i);
- continue;
- }
-#endif
- i=cc_ReadCapacity();
- if (i>=0) break;
- msg(DBG_INF,"DiskInfo: ReadCapacity #%d returns %d\n", j, i);
-#if 0
- i=cc_DriveReset();
-#endif
- if (!fam0_drive && j == 2) break;
- }
- if (j==LOOP_COUNT) return (-33); /* give up */
-
- i=cc_ReadTocDescr();
- if (i<0)
- {
- msg(DBG_INF,"DiskInfo: ReadTocDescr returns %d\n", i);
- return (i);
- }
- i=ReadToC();
- if (i<0)
- {
- msg(DBG_INF,"DiskInfo: ReadToC returns %d\n", i);
- return (i);
- }
- i=cc_CheckMultiSession();
- if (i<0)
- {
- msg(DBG_INF,"DiskInfo: cc_CheckMultiSession returns %d\n", i);
- return (i);
- }
- if (current_drive->f_multisession) current_drive->sbp_bufsiz=1; /* possibly a weird PhotoCD */
- else current_drive->sbp_bufsiz=buffers;
- i=cc_ReadTocEntry(current_drive->n_first_track);
- if (i<0)
- {
- msg(DBG_INF,"DiskInfo: cc_ReadTocEntry(1) returns %d\n", i);
- return (i);
- }
- i=cc_ReadUPC();
- if (i<0) msg(DBG_INF,"DiskInfo: cc_ReadUPC returns %d\n", i);
- if ((fam0L_drive) && (current_drive->xa_byte==0x20 || current_drive->xa_byte == 0x10))
- {
- /* XA disk with old drive */
- cc_ModeSelect(CD_FRAMESIZE_RAW1);
- cc_ModeSense();
- }
- if (famT_drive) cc_prep_mode_T();
- msg(DBG_000,"DiskInfo done.\n");
- return (0);
-}
-
-static int sbpcd_drive_status(struct cdrom_device_info *cdi, int slot_nr)
-{
- struct sbpcd_drive *p = cdi->handle;
- int st;
-
- if (CDSL_CURRENT != slot_nr) {
- /* we have no changer support */
- return -EINVAL;
- }
-
- cc_ReadStatus();
- st=ResponseStatus();
- if (st<0)
- {
- msg(DBG_INF,"sbpcd_drive_status: timeout.\n");
- return (0);
- }
- msg(DBG_000,"Drive Status: door_locked =%d.\n", st_door_locked);
- msg(DBG_000,"Drive Status: door_closed =%d.\n", st_door_closed);
- msg(DBG_000,"Drive Status: caddy_in =%d.\n", st_caddy_in);
- msg(DBG_000,"Drive Status: disk_ok =%d.\n", st_diskok);
- msg(DBG_000,"Drive Status: spinning =%d.\n", st_spinning);
- msg(DBG_000,"Drive Status: busy =%d.\n", st_busy);
-
-#if 0
- if (!(p->status_bits & p_door_closed)) return CDS_TRAY_OPEN;
- if (p->status_bits & p_disk_ok) return CDS_DISC_OK;
- if (p->status_bits & p_disk_in) return CDS_DRIVE_NOT_READY;
-
- return CDS_NO_DISC;
-#else
- if (p->status_bits & p_spinning) return CDS_DISC_OK;
-/* return CDS_TRAY_OPEN; */
- return CDS_NO_DISC;
-
-#endif
-
-}
-
-
-/*==========================================================================*/
-#ifdef FUTURE
-/*
- * called always if driver gets entered
- * returns 0 or ERROR2 or ERROR15
- */
-static int prepare(u_char func, u_char subfunc)
-{
- int i;
-
- if (fam0L_drive)
- {
- i=inb(CDi_status);
- if (i&s_attention) GetStatus();
- }
- else if (fam1_drive) GetStatus();
- else if (fam2_drive) GetStatus();
- else if (famT_drive) GetStatus();
- if (current_drive->CD_changed==0xFF)
- {
- current_drive->diskstate_flags=0;
- current_drive->audio_state=0;
- if (!st_diskok)
- {
- i=check_allowed1(func,subfunc);
- if (i<0) return (-2);
- }
- else
- {
- i=check_allowed3(func,subfunc);
- if (i<0)
- {
- current_drive->CD_changed=1;
- return (-15);
- }
- }
- }
- else
- {
- if (!st_diskok)
- {
- current_drive->diskstate_flags=0;
- current_drive->audio_state=0;
- i=check_allowed1(func,subfunc);
- if (i<0) return (-2);
- }
- else
- {
- if (st_busy)
- {
- if (current_drive->audio_state!=audio_pausing)
- {
- i=check_allowed2(func,subfunc);
- if (i<0) return (-2);
- }
- }
- else
- {
- if (current_drive->audio_state==audio_playing) seek_pos_audio_end();
- current_drive->audio_state=0;
- }
- if (!frame_size_valid)
- {
- i=DiskInfo();
- if (i<0)
- {
- current_drive->diskstate_flags=0;
- current_drive->audio_state=0;
- i=check_allowed1(func,subfunc);
- if (i<0) return (-2);
- }
- }
- }
- }
- return (0);
-}
-#endif /* FUTURE */
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * Check the results of the "get status" command.
- */
-static int sbp_status(void)
-{
- int st;
-
- st=ResponseStatus();
- if (st<0)
- {
- msg(DBG_INF,"sbp_status: timeout.\n");
- return (0);
- }
-
- if (!st_spinning) msg(DBG_SPI,"motor got off - ignoring.\n");
-
- if (st_check)
- {
- msg(DBG_INF,"st_check detected - retrying.\n");
- return (0);
- }
- if (!st_door_closed)
- {
- msg(DBG_INF,"door is open - retrying.\n");
- return (0);
- }
- if (!st_caddy_in)
- {
- msg(DBG_INF,"disk removed - retrying.\n");
- return (0);
- }
- if (!st_diskok)
- {
- msg(DBG_INF,"!st_diskok detected - retrying.\n");
- return (0);
- }
- if (st_busy)
- {
- msg(DBG_INF,"st_busy detected - retrying.\n");
- return (0);
- }
- return (1);
-}
-/*==========================================================================*/
-
-static int sbpcd_get_last_session(struct cdrom_device_info *cdi, struct cdrom_multisession *ms_infp)
-{
- struct sbpcd_drive *p = cdi->handle;
- ms_infp->addr_format = CDROM_LBA;
- ms_infp->addr.lba = p->lba_multi;
- if (p->f_multisession)
- ms_infp->xa_flag=1; /* valid redirection address */
- else
- ms_infp->xa_flag=0; /* invalid redirection address */
-
- return 0;
-}
-
-static int sbpcd_audio_ioctl(struct cdrom_device_info *cdi, u_int cmd,
- void * arg)
-{
- struct sbpcd_drive *p = cdi->handle;
- int i, st, j;
-
- msg(DBG_IO2,"ioctl(%s, 0x%08lX, 0x%08p)\n", cdi->name, cmd, arg);
- if (p->drv_id==-1) {
- msg(DBG_INF, "ioctl: bad device: %s\n", cdi->name);
- return (-ENXIO); /* no such drive */
- }
- down(&ioctl_read_sem);
- if (p != current_drive)
- switch_drive(p);
-
- msg(DBG_IO2,"ioctl: device %s, request %04X\n",cdi->name,cmd);
- switch (cmd) /* Sun-compatible */
- {
-
- case CDROMPAUSE: /* Pause the drive */
- msg(DBG_IOC,"ioctl: CDROMPAUSE entered.\n");
- /* pause the drive unit when it is currently in PLAY mode, */
- /* or reset the starting and ending locations when in PAUSED mode. */
- /* If applicable, at the next stopping point it reaches */
- /* the drive will discontinue playing. */
- switch (current_drive->audio_state)
- {
- case audio_playing:
- if (famL_drive) i=cc_ReadSubQ();
- else i=cc_Pause_Resume(1);
- if (i<0) RETURN_UP(-EIO);
- if (famL_drive) i=cc_Pause_Resume(1);
- else i=cc_ReadSubQ();
- if (i<0) RETURN_UP(-EIO);
- current_drive->pos_audio_start=current_drive->SubQ_run_tot;
- current_drive->audio_state=audio_pausing;
- RETURN_UP(0);
- case audio_pausing:
- i=cc_Seek(current_drive->pos_audio_start,1);
- if (i<0) RETURN_UP(-EIO);
- RETURN_UP(0);
- default:
- RETURN_UP(-EINVAL);
- }
-
- case CDROMRESUME: /* resume paused audio play */
- msg(DBG_IOC,"ioctl: CDROMRESUME entered.\n");
- /* resume playing audio tracks when a previous PLAY AUDIO call has */
- /* been paused with a PAUSE command. */
- /* It will resume playing from the location saved in SubQ_run_tot. */
- if (current_drive->audio_state!=audio_pausing) RETURN_UP(-EINVAL);
- if (famL_drive)
- i=cc_PlayAudio(current_drive->pos_audio_start,
- current_drive->pos_audio_end);
- else i=cc_Pause_Resume(3);
- if (i<0) RETURN_UP(-EIO);
- current_drive->audio_state=audio_playing;
- RETURN_UP(0);
-
- case CDROMPLAYMSF:
- msg(DBG_IOC,"ioctl: CDROMPLAYMSF entered.\n");
-#ifdef SAFE_MIXED
- if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
- if (current_drive->audio_state==audio_playing)
- {
- i=cc_Pause_Resume(1);
- if (i<0) RETURN_UP(-EIO);
- i=cc_ReadSubQ();
- if (i<0) RETURN_UP(-EIO);
- current_drive->pos_audio_start=current_drive->SubQ_run_tot;
- i=cc_Seek(current_drive->pos_audio_start,1);
- }
- memcpy(&msf, (void *) arg, sizeof(struct cdrom_msf));
- /* values come as msf-bin */
- current_drive->pos_audio_start = (msf.cdmsf_min0<<16) |
- (msf.cdmsf_sec0<<8) |
- msf.cdmsf_frame0;
- current_drive->pos_audio_end = (msf.cdmsf_min1<<16) |
- (msf.cdmsf_sec1<<8) |
- msf.cdmsf_frame1;
- msg(DBG_IOX,"ioctl: CDROMPLAYMSF %08X %08X\n",
- current_drive->pos_audio_start,current_drive->pos_audio_end);
- i=cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end);
- if (i<0)
- {
- msg(DBG_INF,"ioctl: cc_PlayAudio returns %d\n",i);
- DriveReset();
- current_drive->audio_state=0;
- RETURN_UP(-EIO);
- }
- current_drive->audio_state=audio_playing;
- RETURN_UP(0);
-
- case CDROMPLAYTRKIND: /* Play a track. This currently ignores index. */
- msg(DBG_IOC,"ioctl: CDROMPLAYTRKIND entered.\n");
-#ifdef SAFE_MIXED
- if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
- if (current_drive->audio_state==audio_playing)
- {
- msg(DBG_IOX,"CDROMPLAYTRKIND: already audio_playing.\n");
-#if 1
- RETURN_UP(0); /* just let us play on */
-#else
- RETURN_UP(-EINVAL); /* play on, but say "error" */
-#endif
- }
- memcpy(&ti,(void *) arg,sizeof(struct cdrom_ti));
- msg(DBG_IOX,"ioctl: trk0: %d, ind0: %d, trk1:%d, ind1:%d\n",
- ti.cdti_trk0,ti.cdti_ind0,ti.cdti_trk1,ti.cdti_ind1);
- if (ti.cdti_trk0<current_drive->n_first_track) RETURN_UP(-EINVAL);
- if (ti.cdti_trk0>current_drive->n_last_track) RETURN_UP(-EINVAL);
- if (ti.cdti_trk1<ti.cdti_trk0) ti.cdti_trk1=ti.cdti_trk0;
- if (ti.cdti_trk1>current_drive->n_last_track) ti.cdti_trk1=current_drive->n_last_track;
- current_drive->pos_audio_start=current_drive->TocBuffer[ti.cdti_trk0].address;
- current_drive->pos_audio_end=current_drive->TocBuffer[ti.cdti_trk1+1].address;
- i=cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end);
- if (i<0)
- {
- msg(DBG_INF,"ioctl: cc_PlayAudio returns %d\n",i);
- DriveReset();
- current_drive->audio_state=0;
- RETURN_UP(-EIO);
- }
- current_drive->audio_state=audio_playing;
- RETURN_UP(0);
-
- case CDROMREADTOCHDR: /* Read the table of contents header */
- msg(DBG_IOC,"ioctl: CDROMREADTOCHDR entered.\n");
- tochdr.cdth_trk0=current_drive->n_first_track;
- tochdr.cdth_trk1=current_drive->n_last_track;
- memcpy((void *) arg, &tochdr, sizeof(struct cdrom_tochdr));
- RETURN_UP(0);
-
- case CDROMREADTOCENTRY: /* Read an entry in the table of contents */
- msg(DBG_IOC,"ioctl: CDROMREADTOCENTRY entered.\n");
- memcpy(&tocentry, (void *) arg, sizeof(struct cdrom_tocentry));
- i=tocentry.cdte_track;
- if (i==CDROM_LEADOUT) i=current_drive->n_last_track+1;
- else if (i<current_drive->n_first_track||i>current_drive->n_last_track)
- RETURN_UP(-EINVAL);
- tocentry.cdte_adr=current_drive->TocBuffer[i].ctl_adr&0x0F;
- tocentry.cdte_ctrl=(current_drive->TocBuffer[i].ctl_adr>>4)&0x0F;
- tocentry.cdte_datamode=current_drive->TocBuffer[i].format;
- if (tocentry.cdte_format==CDROM_MSF) /* MSF-bin required */
- {
- tocentry.cdte_addr.msf.minute=(current_drive->TocBuffer[i].address>>16)&0x00FF;
- tocentry.cdte_addr.msf.second=(current_drive->TocBuffer[i].address>>8)&0x00FF;
- tocentry.cdte_addr.msf.frame=current_drive->TocBuffer[i].address&0x00FF;
- }
- else if (tocentry.cdte_format==CDROM_LBA) /* blk required */
- tocentry.cdte_addr.lba=msf2blk(current_drive->TocBuffer[i].address);
- else RETURN_UP(-EINVAL);
- memcpy((void *) arg, &tocentry, sizeof(struct cdrom_tocentry));
- RETURN_UP(0);
-
- case CDROMSTOP: /* Spin down the drive */
- msg(DBG_IOC,"ioctl: CDROMSTOP entered.\n");
-#ifdef SAFE_MIXED
- if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
- i=cc_Pause_Resume(1);
- current_drive->audio_state=0;
-#if 0
- cc_DriveReset();
-#endif
- RETURN_UP(i);
-
- case CDROMSTART: /* Spin up the drive */
- msg(DBG_IOC,"ioctl: CDROMSTART entered.\n");
- cc_SpinUp();
- current_drive->audio_state=0;
- RETURN_UP(0);
-
- case CDROMVOLCTRL: /* Volume control */
- msg(DBG_IOC,"ioctl: CDROMVOLCTRL entered.\n");
- memcpy(&volctrl,(char *) arg,sizeof(volctrl));
- current_drive->vol_chan0=0;
- current_drive->vol_ctrl0=volctrl.channel0;
- current_drive->vol_chan1=1;
- current_drive->vol_ctrl1=volctrl.channel1;
- i=cc_SetVolume();
- RETURN_UP(0);
-
- case CDROMVOLREAD: /* read Volume settings from drive */
- msg(DBG_IOC,"ioctl: CDROMVOLREAD entered.\n");
- st=cc_GetVolume();
- if (st<0) RETURN_UP(st);
- volctrl.channel0=current_drive->vol_ctrl0;
- volctrl.channel1=current_drive->vol_ctrl1;
- volctrl.channel2=0;
- volctrl.channel2=0;
- memcpy((void *)arg,&volctrl,sizeof(volctrl));
- RETURN_UP(0);
-
- case CDROMSUBCHNL: /* Get subchannel info */
- msg(DBG_IOS,"ioctl: CDROMSUBCHNL entered.\n");
- /* Bogus, I can do better than this! --AJK
- if ((st_spinning)||(!subq_valid)) {
- i=cc_ReadSubQ();
- if (i<0) RETURN_UP(-EIO);
- }
- */
- i=cc_ReadSubQ();
- if (i<0) {
- j=cc_ReadError(); /* clear out error status from drive */
- current_drive->audio_state=CDROM_AUDIO_NO_STATUS;
- /* get and set the disk state here,
- probably not the right place, but who cares!
- It makes it work properly! --AJK */
- if (current_drive->CD_changed==0xFF) {
- msg(DBG_000,"Disk changed detect\n");
- current_drive->diskstate_flags &= ~cd_size_bit;
- }
- RETURN_UP(-EIO);
- }
- if (current_drive->CD_changed==0xFF) {
- /* reread the TOC because the disk has changed! --AJK */
- msg(DBG_000,"Disk changed STILL detected, rereading TOC!\n");
- i=DiskInfo();
- if(i==0) {
- current_drive->CD_changed=0x00; /* cd has changed, procede, */
- RETURN_UP(-EIO); /* and get TOC, etc on next try! --AJK */
- } else {
- RETURN_UP(-EIO); /* we weren't ready yet! --AJK */
- }
- }
- memcpy(&SC, (void *) arg, sizeof(struct cdrom_subchnl));
- /*
- This virtual crap is very bogus!
- It doesn't detect when the cd is done playing audio!
- Lets do this right with proper hardware register reading!
- */
- cc_ReadStatus();
- i=ResponseStatus();
- msg(DBG_000,"Drive Status: door_locked =%d.\n", st_door_locked);
- msg(DBG_000,"Drive Status: door_closed =%d.\n", st_door_closed);
- msg(DBG_000,"Drive Status: caddy_in =%d.\n", st_caddy_in);
- msg(DBG_000,"Drive Status: disk_ok =%d.\n", st_diskok);
- msg(DBG_000,"Drive Status: spinning =%d.\n", st_spinning);
- msg(DBG_000,"Drive Status: busy =%d.\n", st_busy);
- /* st_busy indicates if it's _ACTUALLY_ playing audio */
- switch (current_drive->audio_state)
- {
- case audio_playing:
- if(st_busy==0) {
- /* CD has stopped playing audio --AJK */
- current_drive->audio_state=audio_completed;
- SC.cdsc_audiostatus=CDROM_AUDIO_COMPLETED;
- } else {
- SC.cdsc_audiostatus=CDROM_AUDIO_PLAY;
- }
- break;
- case audio_pausing:
- SC.cdsc_audiostatus=CDROM_AUDIO_PAUSED;
- break;
- case audio_completed:
- SC.cdsc_audiostatus=CDROM_AUDIO_COMPLETED;
- break;
- default:
- SC.cdsc_audiostatus=CDROM_AUDIO_NO_STATUS;
- break;
- }
- SC.cdsc_adr=current_drive->SubQ_ctl_adr;
- SC.cdsc_ctrl=current_drive->SubQ_ctl_adr>>4;
- SC.cdsc_trk=bcd2bin(current_drive->SubQ_trk);
- SC.cdsc_ind=bcd2bin(current_drive->SubQ_pnt_idx);
- if (SC.cdsc_format==CDROM_LBA)
- {
- SC.cdsc_absaddr.lba=msf2blk(current_drive->SubQ_run_tot);
- SC.cdsc_reladdr.lba=msf2blk(current_drive->SubQ_run_trk);
- }
- else /* not only if (SC.cdsc_format==CDROM_MSF) */
- {
- SC.cdsc_absaddr.msf.minute=(current_drive->SubQ_run_tot>>16)&0x00FF;
- SC.cdsc_absaddr.msf.second=(current_drive->SubQ_run_tot>>8)&0x00FF;
- SC.cdsc_absaddr.msf.frame=current_drive->SubQ_run_tot&0x00FF;
- SC.cdsc_reladdr.msf.minute=(current_drive->SubQ_run_trk>>16)&0x00FF;
- SC.cdsc_reladdr.msf.second=(current_drive->SubQ_run_trk>>8)&0x00FF;
- SC.cdsc_reladdr.msf.frame=current_drive->SubQ_run_trk&0x00FF;
- }
- memcpy((void *) arg, &SC, sizeof(struct cdrom_subchnl));
- msg(DBG_IOS,"CDROMSUBCHNL: %1X %02X %08X %08X %02X %02X %06X %06X\n",
- SC.cdsc_format,SC.cdsc_audiostatus,
- SC.cdsc_adr,SC.cdsc_ctrl,
- SC.cdsc_trk,SC.cdsc_ind,
- SC.cdsc_absaddr,SC.cdsc_reladdr);
- RETURN_UP(0);
-
- default:
- msg(DBG_IOC,"ioctl: unknown function request %04X\n", cmd);
- RETURN_UP(-EINVAL);
- } /* end switch(cmd) */
-}
-/*==========================================================================*/
-/*
- * Take care of the different block sizes between cdrom and Linux.
- */
-static void sbp_transfer(struct request *req)
-{
- long offs;
-
- while ( (req->nr_sectors > 0) &&
- (req->sector/4 >= current_drive->sbp_first_frame) &&
- (req->sector/4 <= current_drive->sbp_last_frame) )
- {
- offs = (req->sector - current_drive->sbp_first_frame * 4) * 512;
- memcpy(req->buffer, current_drive->sbp_buf + offs, 512);
- req->nr_sectors--;
- req->sector++;
- req->buffer += 512;
- }
-}
-/*==========================================================================*/
-/*
- * special end_request for sbpcd to solve CURRENT==NULL bug. (GTL)
- * GTL = Gonzalo Tornaria <tornaria@cmat.edu.uy>
- *
- * This is a kludge so we don't need to modify end_request.
- * We put the req we take out after INIT_REQUEST in the requests list,
- * so that end_request will discard it.
- *
- * The bug could be present in other block devices, perhaps we
- * should modify INIT_REQUEST and end_request instead, and
- * change every block device..
- *
- * Could be a race here?? Could e.g. a timer interrupt schedule() us?
- * If so, we should copy end_request here, and do it right.. (or
- * modify end_request and the block devices).
- *
- * In any case, the race here would be much small than it was, and
- * I couldn't reproduce..
- *
- * The race could be: suppose CURRENT==NULL. We put our req in the list,
- * and we are scheduled. Other process takes over, and gets into
- * do_sbpcd_request. It sees CURRENT!=NULL (it is == to our req), so
- * proceeds. It ends, so CURRENT is now NULL.. Now we awake somewhere in
- * end_request, but now CURRENT==NULL... oops!
- *
- */
-#undef DEBUG_GTL
-
-/*==========================================================================*/
-/*
- * I/O request routine, called from Linux kernel.
- */
-static void do_sbpcd_request(request_queue_t * q)
-{
- u_int block;
- u_int nsect;
- int status_tries, data_tries;
- struct request *req;
- struct sbpcd_drive *p;
-#ifdef DEBUG_GTL
- static int xx_nr=0;
- int xnr;
-#endif
-
- request_loop:
-#ifdef DEBUG_GTL
- xnr=++xx_nr;
-
- req = elv_next_request(q);
-
- if (!req)
- {
- printk( "do_sbpcd_request[%di](NULL), Pid:%d, Time:%li\n",
- xnr, current->pid, jiffies);
- printk( "do_sbpcd_request[%do](NULL) end 0 (null), Time:%li\n",
- xnr, jiffies);
- return;
- }
-
- printk(" do_sbpcd_request[%di](%p:%ld+%ld), Pid:%d, Time:%li\n",
- xnr, req, req->sector, req->nr_sectors, current->pid, jiffies);
-#endif
-
- req = elv_next_request(q); /* take out our request so no other */
- if (!req)
- return;
-
- if (req -> sector == -1)
- end_request(req, 0);
- spin_unlock_irq(q->queue_lock);
-
- down(&ioctl_read_sem);
- if (rq_data_dir(elv_next_request(q)) != READ)
- {
- msg(DBG_INF, "bad cmd %d\n", req->cmd[0]);
- goto err_done;
- }
- p = req->rq_disk->private_data;
-#if OLD_BUSY
- while (busy_audio) sbp_sleep(HZ); /* wait a bit */
- busy_data=1;
-#endif /* OLD_BUSY */
-
- if (p->audio_state==audio_playing) goto err_done;
- if (p != current_drive)
- switch_drive(p);
-
- block = req->sector; /* always numbered as 512-byte-pieces */
- nsect = req->nr_sectors; /* always counted as 512-byte-pieces */
-
- msg(DBG_BSZ,"read sector %d (%d sectors)\n", block, nsect);
-#if 0
- msg(DBG_MUL,"read LBA %d\n", block/4);
-#endif
-
- sbp_transfer(req);
- /* if we satisfied the request from the buffer, we're done. */
- if (req->nr_sectors == 0)
- {
-#ifdef DEBUG_GTL
- printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 2, Time:%li\n",
- xnr, req, req->sector, req->nr_sectors, jiffies);
-#endif
- up(&ioctl_read_sem);
- spin_lock_irq(q->queue_lock);
- end_request(req, 1);
- goto request_loop;
- }
-
-#ifdef FUTURE
- i=prepare(0,0); /* at moment not really a hassle check, but ... */
- if (i!=0)
- msg(DBG_INF,"\"prepare\" tells error %d -- ignored\n", i);
-#endif /* FUTURE */
-
- if (!st_spinning) cc_SpinUp();
-
- for (data_tries=n_retries; data_tries > 0; data_tries--)
- {
- for (status_tries=3; status_tries > 0; status_tries--)
- {
- flags_cmd_out |= f_respo3;
- cc_ReadStatus();
- if (sbp_status() != 0) break;
- if (st_check) cc_ReadError();
- sbp_sleep(1); /* wait a bit, try again */
- }
- if (status_tries == 0)
- {
- msg(DBG_INF,"sbp_status: failed after 3 tries in line %d\n", __LINE__);
- break;
- }
-
- sbp_read_cmd(req);
- sbp_sleep(0);
- if (sbp_data(req) != 0)
- {
-#ifdef SAFE_MIXED
- current_drive->has_data=2; /* is really a data disk */
-#endif /* SAFE_MIXED */
-#ifdef DEBUG_GTL
- printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 3, Time:%li\n",
- xnr, req, req->sector, req->nr_sectors, jiffies);
-#endif
- up(&ioctl_read_sem);
- spin_lock_irq(q->queue_lock);
- end_request(req, 1);
- goto request_loop;
- }
- }
-
- err_done:
-#if OLD_BUSY
- busy_data=0;
-#endif /* OLD_BUSY */
-#ifdef DEBUG_GTL
- printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 4 (error), Time:%li\n",
- xnr, req, req->sector, req->nr_sectors, jiffies);
-#endif
- up(&ioctl_read_sem);
- sbp_sleep(0); /* wait a bit, try again */
- spin_lock_irq(q->queue_lock);
- end_request(req, 0);
- goto request_loop;
-}
-/*==========================================================================*/
-/*
- * build and send the READ command.
- */
-static void sbp_read_cmd(struct request *req)
-{
-#undef OLD
-
- int i;
- int block;
-
- current_drive->sbp_first_frame=current_drive->sbp_last_frame=-1; /* purge buffer */
- current_drive->sbp_current = 0;
- block=req->sector/4;
- if (block+current_drive->sbp_bufsiz <= current_drive->CDsize_frm)
- current_drive->sbp_read_frames = current_drive->sbp_bufsiz;
- else
- {
- current_drive->sbp_read_frames=current_drive->CDsize_frm-block;
- /* avoid reading past end of data */
- if (current_drive->sbp_read_frames < 1)
- {
- msg(DBG_INF,"requested frame %d, CD size %d ???\n",
- block, current_drive->CDsize_frm);
- current_drive->sbp_read_frames=1;
- }
- }
-
- flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | f_obey_p_check;
- clr_cmdbuf();
- if (famV_drive)
- {
- drvcmd[0]=CMDV_READ;
- lba2msf(block,&drvcmd[1]); /* msf-bcd format required */
- bin2bcdx(&drvcmd[1]);
- bin2bcdx(&drvcmd[2]);
- bin2bcdx(&drvcmd[3]);
- drvcmd[4]=current_drive->sbp_read_frames>>8;
- drvcmd[5]=current_drive->sbp_read_frames&0xff;
- drvcmd[6]=0x02; /* flag "msf-bcd" */
- }
- else if (fam0L_drive)
- {
- flags_cmd_out |= f_lopsta | f_getsta | f_bit1;
- if (current_drive->xa_byte==0x20)
- {
- cmd_type=READ_M2;
- drvcmd[0]=CMD0_READ_XA; /* "read XA frames", old drives */
- drvcmd[1]=(block>>16)&0x0ff;
- drvcmd[2]=(block>>8)&0x0ff;
- drvcmd[3]=block&0x0ff;
- drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff;
- drvcmd[5]=current_drive->sbp_read_frames&0x0ff;
- }
- else
- {
- drvcmd[0]=CMD0_READ; /* "read frames", old drives */
- if (current_drive->drv_type>=drv_201)
- {
- lba2msf(block,&drvcmd[1]); /* msf-bcd format required */
- bin2bcdx(&drvcmd[1]);
- bin2bcdx(&drvcmd[2]);
- bin2bcdx(&drvcmd[3]);
- }
- else
- {
- drvcmd[1]=(block>>16)&0x0ff;
- drvcmd[2]=(block>>8)&0x0ff;
- drvcmd[3]=block&0x0ff;
- }
- drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff;
- drvcmd[5]=current_drive->sbp_read_frames&0x0ff;
- drvcmd[6]=(current_drive->drv_type<drv_201)?0:2; /* flag "lba or msf-bcd format" */
- }
- }
- else if (fam1_drive)
- {
- drvcmd[0]=CMD1_READ;
- lba2msf(block,&drvcmd[1]); /* msf-bin format required */
- drvcmd[5]=(current_drive->sbp_read_frames>>8)&0x0ff;
- drvcmd[6]=current_drive->sbp_read_frames&0x0ff;
- }
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_READ;
- lba2msf(block,&drvcmd[1]); /* msf-bin format required */
- drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff;
- drvcmd[5]=current_drive->sbp_read_frames&0x0ff;
- drvcmd[6]=0x02;
- }
- else if (famT_drive)
- {
- drvcmd[0]=CMDT_READ;
- drvcmd[2]=(block>>24)&0x0ff;
- drvcmd[3]=(block>>16)&0x0ff;
- drvcmd[4]=(block>>8)&0x0ff;
- drvcmd[5]=block&0x0ff;
- drvcmd[7]=(current_drive->sbp_read_frames>>8)&0x0ff;
- drvcmd[8]=current_drive->sbp_read_frames&0x0ff;
- }
- flags_cmd_out=f_putcmd;
- response_count=0;
- i=cmd_out();
- if (i<0) msg(DBG_INF,"error giving READ command: %0d\n", i);
- return;
-}
-/*==========================================================================*/
-/*
- * Check the completion of the read-data command. On success, read
- * the current_drive->sbp_bufsiz * 2048 bytes of data from the disk into buffer.
- */
-static int sbp_data(struct request *req)
-{
- int i=0, j=0, l, frame;
- u_int try=0;
- u_long timeout;
- u_char *p;
- u_int data_tries = 0;
- u_int data_waits = 0;
- u_int data_retrying = 0;
- int error_flag;
- int xa_count;
- int max_latency;
- int success;
- int wait;
- int duration;
-
- error_flag=0;
- success=0;
-#if LONG_TIMING
- max_latency=9*HZ;
-#else
- if (current_drive->f_multisession) max_latency=15*HZ;
- else max_latency=5*HZ;
-#endif
- duration=jiffies;
- for (frame=0;frame<current_drive->sbp_read_frames&&!error_flag; frame++)
- {
- SBPCD_CLI;
-
- del_timer(&data_timer);
- data_timer.expires=jiffies+max_latency;
- timed_out_data=0;
- add_timer(&data_timer);
- while (!timed_out_data)
- {
- if (current_drive->f_multisession) try=maxtim_data*4;
- else try=maxtim_data;
- msg(DBG_000,"sbp_data: CDi_status loop: try=%d.\n",try);
- for ( ; try!=0;try--)
- {
- j=inb(CDi_status);
- if (!(j&s_not_data_ready)) break;
- if (!(j&s_not_result_ready)) break;
- if (fam0LV_drive) if (j&s_attention) break;
- }
- if (!(j&s_not_data_ready)) goto data_ready;
- if (try==0)
- {
- if (data_retrying == 0) data_waits++;
- data_retrying = 1;
- msg(DBG_000,"sbp_data: CDi_status loop: sleeping.\n");
- sbp_sleep(1);
- try = 1;
- }
- }
- msg(DBG_INF,"sbp_data: CDi_status loop expired.\n");
- data_ready:
- del_timer(&data_timer);
-
- if (timed_out_data)
- {
- msg(DBG_INF,"sbp_data: CDi_status timeout (timed_out_data) (%02X).\n", j);
- error_flag++;
- }
- if (try==0)
- {
- msg(DBG_INF,"sbp_data: CDi_status timeout (try=0) (%02X).\n", j);
- error_flag++;
- }
- if (!(j&s_not_result_ready))
- {
- msg(DBG_INF, "sbp_data: RESULT_READY where DATA_READY awaited (%02X).\n", j);
- response_count=20;
- j=ResponseInfo();
- j=inb(CDi_status);
- }
- if (j&s_not_data_ready)
- {
- if ((current_drive->ored_ctl_adr&0x40)==0)
- msg(DBG_INF, "CD contains no data tracks.\n");
- else msg(DBG_INF, "sbp_data: DATA_READY timeout (%02X).\n", j);
- error_flag++;
- }
- SBPCD_STI;
- if (error_flag) break;
-
- msg(DBG_000, "sbp_data: beginning to read.\n");
- p = current_drive->sbp_buf + frame * CD_FRAMESIZE;
- if (sbpro_type==1) OUT(CDo_sel_i_d,1);
- if (cmd_type==READ_M2) {
- if (do_16bit) insw(CDi_data, xa_head_buf, CD_XA_HEAD>>1);
- else insb(CDi_data, xa_head_buf, CD_XA_HEAD);
- }
- if (do_16bit) insw(CDi_data, p, CD_FRAMESIZE>>1);
- else insb(CDi_data, p, CD_FRAMESIZE);
- if (cmd_type==READ_M2) {
- if (do_16bit) insw(CDi_data, xa_tail_buf, CD_XA_TAIL>>1);
- else insb(CDi_data, xa_tail_buf, CD_XA_TAIL);
- }
- current_drive->sbp_current++;
- if (sbpro_type==1) OUT(CDo_sel_i_d,0);
- if (cmd_type==READ_M2)
- {
- for (xa_count=0;xa_count<CD_XA_HEAD;xa_count++)
- sprintf(&msgbuf[xa_count*3], " %02X", xa_head_buf[xa_count]);
- msgbuf[xa_count*3]=0;
- msg(DBG_XA1,"xa head:%s\n", msgbuf);
- }
- data_retrying = 0;
- data_tries++;
- if (data_tries >= 1000)
- {
- msg(DBG_INF,"sbp_data() statistics: %d waits in %d frames.\n", data_waits, data_tries);
- data_waits = data_tries = 0;
- }
- }
- duration=jiffies-duration;
- msg(DBG_TEA,"time to read %d frames: %d jiffies .\n",frame,duration);
- if (famT_drive)
- {
- wait=8;
- do
- {
- if (teac==2)
- {
- if ((i=CDi_stat_loop_T()) == -1) break;
- }
- else
- {
- sbp_sleep(1);
- OUT(CDo_sel_i_d,0);
- i=inb(CDi_status);
- }
- if (!(i&s_not_data_ready))
- {
- OUT(CDo_sel_i_d,1);
- j=0;
- do
- {
- if (do_16bit) i=inw(CDi_data);
- else i=inb(CDi_data);
- j++;
- i=inb(CDi_status);
- }
- while (!(i&s_not_data_ready));
- msg(DBG_TEA, "==========too much data (%d bytes/words)==============.\n", j);
- }
- if (!(i&s_not_result_ready))
- {
- OUT(CDo_sel_i_d,0);
- l=0;
- do
- {
- infobuf[l++]=inb(CDi_info);
- i=inb(CDi_status);
- }
- while (!(i&s_not_result_ready));
- if (infobuf[0]==0x00) success=1;
-#if 1
- for (j=0;j<l;j++) sprintf(&msgbuf[j*3], " %02X", infobuf[j]);
- msgbuf[j*3]=0;
- msg(DBG_TEA,"sbp_data info response:%s\n", msgbuf);
-#endif
- if (infobuf[0]==0x02)
- {
- error_flag++;
- do
- {
- ++recursion;
- if (recursion>1) msg(DBG_TEA,"cmd_out_T READ_ERR recursion (sbp_data): %d !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n",recursion);
- else msg(DBG_TEA,"sbp_data: CMDT_READ_ERR necessary.\n");
- clr_cmdbuf();
- drvcmd[0]=CMDT_READ_ERR;
- j=cmd_out_T(); /* !!! recursive here !!! */
- --recursion;
- sbp_sleep(1);
- }
- while (j<0);
- current_drive->error_state=infobuf[2];
- current_drive->b3=infobuf[3];
- current_drive->b4=infobuf[4];
- }
- break;
- }
- else
- {
-#if 0
- msg(DBG_TEA, "============= waiting for result=================.\n");
- sbp_sleep(1);
-#endif
- }
- }
- while (wait--);
- }
-
- if (error_flag) /* must have been spurious D_RDY or (ATTN&&!D_RDY) */
- {
- msg(DBG_TEA, "================error flag: %d=================.\n", error_flag);
- msg(DBG_INF,"sbp_data: read aborted by drive.\n");
-#if 1
- i=cc_DriveReset(); /* ugly fix to prevent a hang */
-#else
- i=cc_ReadError();
-#endif
- return (0);
- }
-
- if (fam0LV_drive)
- {
- SBPCD_CLI;
- i=maxtim_data;
- for (timeout=jiffies+HZ; time_before(jiffies, timeout); timeout--)
- {
- for ( ;i!=0;i--)
- {
- j=inb(CDi_status);
- if (!(j&s_not_data_ready)) break;
- if (!(j&s_not_result_ready)) break;
- if (j&s_attention) break;
- }
- if (i != 0 || time_after_eq(jiffies, timeout)) break;
- sbp_sleep(0);
- i = 1;
- }
- if (i==0) msg(DBG_INF,"status timeout after READ.\n");
- if (!(j&s_attention))
- {
- msg(DBG_INF,"sbp_data: timeout waiting DRV_ATTN - retrying.\n");
- i=cc_DriveReset(); /* ugly fix to prevent a hang */
- SBPCD_STI;
- return (0);
- }
- SBPCD_STI;
- }
-
-#if 0
- if (!success)
-#endif
- do
- {
- if (fam0LV_drive) cc_ReadStatus();
-#if 1
- if (famT_drive) msg(DBG_TEA, "================before ResponseStatus=================.\n", i);
-#endif
- i=ResponseStatus(); /* builds status_bits, returns orig. status (old) or faked p_success (new) */
-#if 1
- if (famT_drive) msg(DBG_TEA, "================ResponseStatus: %d=================.\n", i);
-#endif
- if (i<0)
- {
- msg(DBG_INF,"bad cc_ReadStatus after read: %02X\n", current_drive->status_bits);
- return (0);
- }
- }
- while ((fam0LV_drive)&&(!st_check)&&(!(i&p_success)));
- if (st_check)
- {
- i=cc_ReadError();
- msg(DBG_INF,"cc_ReadError was necessary after read: %d\n",i);
- return (0);
- }
- if (fatal_err)
- {
- fatal_err=0;
- current_drive->sbp_first_frame=current_drive->sbp_last_frame=-1; /* purge buffer */
- current_drive->sbp_current = 0;
- msg(DBG_INF,"sbp_data: fatal_err - retrying.\n");
- return (0);
- }
-
- current_drive->sbp_first_frame = req -> sector / 4;
- current_drive->sbp_last_frame = current_drive->sbp_first_frame + current_drive->sbp_read_frames - 1;
- sbp_transfer(req);
- return (1);
-}
-/*==========================================================================*/
-
-static int sbpcd_block_open(struct inode *inode, struct file *file)
-{
- struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data;
- return cdrom_open(p->sbpcd_infop, inode, file);
-}
-
-static int sbpcd_block_release(struct inode *inode, struct file *file)
-{
- struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data;
- return cdrom_release(p->sbpcd_infop, file);
-}
-
-static int sbpcd_block_ioctl(struct inode *inode, struct file *file,
- unsigned cmd, unsigned long arg)
-{
- struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data;
- struct cdrom_device_info *cdi = p->sbpcd_infop;
- int ret, i;
-
- ret = cdrom_ioctl(file, p->sbpcd_infop, inode, cmd, arg);
- if (ret != -ENOSYS)
- return ret;
-
- msg(DBG_IO2,"ioctl(%s, 0x%08lX, 0x%08lX)\n", cdi->name, cmd, arg);
- if (p->drv_id==-1) {
- msg(DBG_INF, "ioctl: bad device: %s\n", cdi->name);
- return (-ENXIO); /* no such drive */
- }
- down(&ioctl_read_sem);
- if (p != current_drive)
- switch_drive(p);
-
- msg(DBG_IO2,"ioctl: device %s, request %04X\n",cdi->name,cmd);
- switch (cmd) /* Sun-compatible */
- {
- case DDIOCSDBG: /* DDI Debug */
- if (!capable(CAP_SYS_ADMIN)) RETURN_UP(-EPERM);
- i=sbpcd_dbg_ioctl(arg,1);
- RETURN_UP(i);
- case CDROMRESET: /* hard reset the drive */
- msg(DBG_IOC,"ioctl: CDROMRESET entered.\n");
- i=DriveReset();
- current_drive->audio_state=0;
- RETURN_UP(i);
-
- case CDROMREADMODE1:
- msg(DBG_IOC,"ioctl: CDROMREADMODE1 requested.\n");
-#ifdef SAFE_MIXED
- if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
- cc_ModeSelect(CD_FRAMESIZE);
- cc_ModeSense();
- current_drive->mode=READ_M1;
- RETURN_UP(0);
-
- case CDROMREADMODE2: /* not usable at the moment */
- msg(DBG_IOC,"ioctl: CDROMREADMODE2 requested.\n");
-#ifdef SAFE_MIXED
- if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
- cc_ModeSelect(CD_FRAMESIZE_RAW1);
- cc_ModeSense();
- current_drive->mode=READ_M2;
- RETURN_UP(0);
-
- case CDROMAUDIOBUFSIZ: /* configure the audio buffer size */
- msg(DBG_IOC,"ioctl: CDROMAUDIOBUFSIZ entered.\n");
- if (current_drive->sbp_audsiz>0)
- vfree(current_drive->aud_buf);
- current_drive->aud_buf=NULL;
- current_drive->sbp_audsiz=arg;
-
- if (current_drive->sbp_audsiz>16)
- {
- current_drive->sbp_audsiz = 0;
- RETURN_UP(current_drive->sbp_audsiz);
- }
-
- if (current_drive->sbp_audsiz>0)
- {
- current_drive->aud_buf=(u_char *) vmalloc(current_drive->sbp_audsiz*CD_FRAMESIZE_RAW);
- if (current_drive->aud_buf==NULL)
- {
- msg(DBG_INF,"audio buffer (%d frames) not available.\n",current_drive->sbp_audsiz);
- current_drive->sbp_audsiz=0;
- }
- else msg(DBG_INF,"audio buffer size: %d frames.\n",current_drive->sbp_audsiz);
- }
- RETURN_UP(current_drive->sbp_audsiz);
-
- case CDROMREADAUDIO:
- { /* start of CDROMREADAUDIO */
- int i=0, j=0, frame, block=0;
- u_int try=0;
- u_long timeout;
- u_char *p;
- u_int data_tries = 0;
- u_int data_waits = 0;
- u_int data_retrying = 0;
- int status_tries;
- int error_flag;
-
- msg(DBG_IOC,"ioctl: CDROMREADAUDIO entered.\n");
- if (fam0_drive) RETURN_UP(-EINVAL);
- if (famL_drive) RETURN_UP(-EINVAL);
- if (famV_drive) RETURN_UP(-EINVAL);
- if (famT_drive) RETURN_UP(-EINVAL);
-#ifdef SAFE_MIXED
- if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
- if (current_drive->aud_buf==NULL) RETURN_UP(-EINVAL);
- if (copy_from_user(&read_audio, (void __user *)arg,
- sizeof(struct cdrom_read_audio)))
- RETURN_UP(-EFAULT);
- if (read_audio.nframes < 0 || read_audio.nframes>current_drive->sbp_audsiz) RETURN_UP(-EINVAL);
- if (!access_ok(VERIFY_WRITE, read_audio.buf,
- read_audio.nframes*CD_FRAMESIZE_RAW))
- RETURN_UP(-EFAULT);
-
- if (read_audio.addr_format==CDROM_MSF) /* MSF-bin specification of where to start */
- block=msf2lba(&read_audio.addr.msf.minute);
- else if (read_audio.addr_format==CDROM_LBA) /* lba specification of where to start */
- block=read_audio.addr.lba;
- else RETURN_UP(-EINVAL);
-#if 000
- i=cc_SetSpeed(speed_150,0,0);
- if (i) msg(DBG_AUD,"read_audio: SetSpeed error %d\n", i);
-#endif
- msg(DBG_AUD,"read_audio: lba: %d, msf: %06X\n",
- block, blk2msf(block));
- msg(DBG_AUD,"read_audio: before cc_ReadStatus.\n");
-#if OLD_BUSY
- while (busy_data) sbp_sleep(HZ/10); /* wait a bit */
- busy_audio=1;
-#endif /* OLD_BUSY */
- error_flag=0;
- for (data_tries=5; data_tries>0; data_tries--)
- {
- msg(DBG_AUD,"data_tries=%d ...\n", data_tries);
- current_drive->mode=READ_AU;
- cc_ModeSelect(CD_FRAMESIZE_RAW);
- cc_ModeSense();
- for (status_tries=3; status_tries > 0; status_tries--)
- {
- flags_cmd_out |= f_respo3;
- cc_ReadStatus();
- if (sbp_status() != 0) break;
- if (st_check) cc_ReadError();
- sbp_sleep(1); /* wait a bit, try again */
- }
- if (status_tries == 0)
- {
- msg(DBG_AUD,"read_audio: sbp_status: failed after 3 tries in line %d.\n", __LINE__);
- continue;
- }
- msg(DBG_AUD,"read_audio: sbp_status: ok.\n");
-
- flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | f_obey_p_check;
- if (fam0L_drive)
- {
- flags_cmd_out |= f_lopsta | f_getsta | f_bit1;
- cmd_type=READ_M2;
- drvcmd[0]=CMD0_READ_XA; /* "read XA frames", old drives */
- drvcmd[1]=(block>>16)&0x000000ff;
- drvcmd[2]=(block>>8)&0x000000ff;
- drvcmd[3]=block&0x000000ff;
- drvcmd[4]=0;
- drvcmd[5]=read_audio.nframes; /* # of frames */
- drvcmd[6]=0;
- }
- else if (fam1_drive)
- {
- drvcmd[0]=CMD1_READ; /* "read frames", new drives */
- lba2msf(block,&drvcmd[1]); /* msf-bin format required */
- drvcmd[4]=0;
- drvcmd[5]=0;
- drvcmd[6]=read_audio.nframes; /* # of frames */
- }
- else if (fam2_drive)
- {
- drvcmd[0]=CMD2_READ_XA2;
- lba2msf(block,&drvcmd[1]); /* msf-bin format required */
- drvcmd[4]=0;
- drvcmd[5]=read_audio.nframes; /* # of frames */
- drvcmd[6]=0x11; /* raw mode */
- }
- else if (famT_drive) /* CD-55A: not tested yet */
- {
- }
- msg(DBG_AUD,"read_audio: before giving \"read\" command.\n");
- flags_cmd_out=f_putcmd;
- response_count=0;
- i=cmd_out();
- if (i<0) msg(DBG_INF,"error giving READ AUDIO command: %0d\n", i);
- sbp_sleep(0);
- msg(DBG_AUD,"read_audio: after giving \"read\" command.\n");
- for (frame=1;frame<2 && !error_flag; frame++)
- {
- try=maxtim_data;
- for (timeout=jiffies+9*HZ; ; )
- {
- for ( ; try!=0;try--)
- {
- j=inb(CDi_status);
- if (!(j&s_not_data_ready)) break;
- if (!(j&s_not_result_ready)) break;
- if (fam0L_drive) if (j&s_attention) break;
- }
- if (try != 0 || time_after_eq(jiffies, timeout)) break;
- if (data_retrying == 0) data_waits++;
- data_retrying = 1;
- sbp_sleep(1);
- try = 1;
- }
- if (try==0)
- {
- msg(DBG_INF,"read_audio: sbp_data: CDi_status timeout.\n");
- error_flag++;
- break;
- }
- msg(DBG_AUD,"read_audio: sbp_data: CDi_status ok.\n");
- if (j&s_not_data_ready)
- {
- msg(DBG_INF, "read_audio: sbp_data: DATA_READY timeout.\n");
- error_flag++;
- break;
- }
- msg(DBG_AUD,"read_audio: before reading data.\n");
- error_flag=0;
- p = current_drive->aud_buf;
- if (sbpro_type==1) OUT(CDo_sel_i_d,1);
- if (do_16bit)
- {
- u_short *p2 = (u_short *) p;
-
- for (; (u_char *) p2 < current_drive->aud_buf + read_audio.nframes*CD_FRAMESIZE_RAW;)
- {
- if ((inb_p(CDi_status)&s_not_data_ready)) continue;
-
- /* get one sample */
- *p2++ = inw_p(CDi_data);
- *p2++ = inw_p(CDi_data);
- }
- } else {
- for (; p < current_drive->aud_buf + read_audio.nframes*CD_FRAMESIZE_RAW;)
- {
- if ((inb_p(CDi_status)&s_not_data_ready)) continue;
-
- /* get one sample */
- *p++ = inb_p(CDi_data);
- *p++ = inb_p(CDi_data);
- *p++ = inb_p(CDi_data);
- *p++ = inb_p(CDi_data);
- }
- }
- if (sbpro_type==1) OUT(CDo_sel_i_d,0);
- data_retrying = 0;
- }
- msg(DBG_AUD,"read_audio: after reading data.\n");
- if (error_flag) /* must have been spurious D_RDY or (ATTN&&!D_RDY) */
- {
- msg(DBG_AUD,"read_audio: read aborted by drive\n");
-#if 0000
- i=cc_DriveReset(); /* ugly fix to prevent a hang */
-#else
- i=cc_ReadError();
-#endif
- continue;
- }
- if (fam0L_drive)
- {
- i=maxtim_data;
- for (timeout=jiffies+9*HZ; time_before(jiffies, timeout); timeout--)
- {
- for ( ;i!=0;i--)
- {
- j=inb(CDi_status);
- if (!(j&s_not_data_ready)) break;
- if (!(j&s_not_result_ready)) break;
- if (j&s_attention) break;
- }
- if (i != 0 || time_after_eq(jiffies, timeout)) break;
- sbp_sleep(0);
- i = 1;
- }
- if (i==0) msg(DBG_AUD,"read_audio: STATUS TIMEOUT AFTER READ");
- if (!(j&s_attention))
- {
- msg(DBG_AUD,"read_audio: sbp_data: timeout waiting DRV_ATTN - retrying\n");
- i=cc_DriveReset(); /* ugly fix to prevent a hang */
- continue;
- }
- }
- do
- {
- if (fam0L_drive) cc_ReadStatus();
- i=ResponseStatus(); /* builds status_bits, returns orig. status (old) or faked p_success (new) */
- if (i<0) { msg(DBG_AUD,
- "read_audio: cc_ReadStatus error after read: %02X\n",
- current_drive->status_bits);
- continue; /* FIXME */
- }
- }
- while ((fam0L_drive)&&(!st_check)&&(!(i&p_success)));
- if (st_check)
- {
- i=cc_ReadError();
- msg(DBG_AUD,"read_audio: cc_ReadError was necessary after read: %02X\n",i);
- continue;
- }
- if (copy_to_user(read_audio.buf,
- current_drive->aud_buf,
- read_audio.nframes * CD_FRAMESIZE_RAW))
- RETURN_UP(-EFAULT);
- msg(DBG_AUD,"read_audio: copy_to_user done.\n");
- break;
- }
- cc_ModeSelect(CD_FRAMESIZE);
- cc_ModeSense();
- current_drive->mode=READ_M1;
-#if OLD_BUSY
- busy_audio=0;
-#endif /* OLD_BUSY */
- if (data_tries == 0)
- {
- msg(DBG_AUD,"read_audio: failed after 5 tries in line %d.\n", __LINE__);
- RETURN_UP(-EIO);
- }
- msg(DBG_AUD,"read_audio: successful return.\n");
- RETURN_UP(0);
- } /* end of CDROMREADAUDIO */
-
- default:
- msg(DBG_IOC,"ioctl: unknown function request %04X\n", cmd);
- RETURN_UP(-EINVAL);
- } /* end switch(cmd) */
-}
-
-static int sbpcd_block_media_changed(struct gendisk *disk)
-{
- struct sbpcd_drive *p = disk->private_data;
- return cdrom_media_changed(p->sbpcd_infop);
-}
-
-static struct block_device_operations sbpcd_bdops =
-{
- .owner = THIS_MODULE,
- .open = sbpcd_block_open,
- .release = sbpcd_block_release,
- .ioctl = sbpcd_block_ioctl,
- .media_changed = sbpcd_block_media_changed,
-};
-/*==========================================================================*/
-/*
- * Open the device special file. Check that a disk is in. Read TOC.
- */
-static int sbpcd_open(struct cdrom_device_info *cdi, int purpose)
-{
- struct sbpcd_drive *p = cdi->handle;
-
- down(&ioctl_read_sem);
- switch_drive(p);
-
- /*
- * try to keep an "open" counter here and lock the door if 0->1.
- */
- msg(DBG_LCK,"open_count: %d -> %d\n",
- current_drive->open_count,current_drive->open_count+1);
- if (++current_drive->open_count<=1)
- {
- int i;
- i=LockDoor();
- current_drive->open_count=1;
- if (famT_drive) msg(DBG_TEA,"sbpcd_open: before i=DiskInfo();.\n");
- i=DiskInfo();
- if (famT_drive) msg(DBG_TEA,"sbpcd_open: after i=DiskInfo();.\n");
- if ((current_drive->ored_ctl_adr&0x40)==0)
- {
- msg(DBG_INF,"CD contains no data tracks.\n");
-#ifdef SAFE_MIXED
- current_drive->has_data=0;
-#endif /* SAFE_MIXED */
- }
-#ifdef SAFE_MIXED
- else if (current_drive->has_data<1) current_drive->has_data=1;
-#endif /* SAFE_MIXED */
- }
- if (!st_spinning) cc_SpinUp();
- RETURN_UP(0);
-}
-/*==========================================================================*/
-/*
- * On close, we flush all sbp blocks from the buffer cache.
- */
-static void sbpcd_release(struct cdrom_device_info * cdi)
-{
- struct sbpcd_drive *p = cdi->handle;
-
- if (p->drv_id==-1) {
- msg(DBG_INF, "release: bad device: %s\n", cdi->name);
- return;
- }
- down(&ioctl_read_sem);
- switch_drive(p);
- /*
- * try to keep an "open" counter here and unlock the door if 1->0.
- */
- msg(DBG_LCK,"open_count: %d -> %d\n",
- p->open_count,p->open_count-1);
- if (p->open_count>-2) /* CDROMEJECT may have been done */
- {
- if (--p->open_count<=0)
- {
- p->sbp_first_frame=p->sbp_last_frame=-1;
- if (p->audio_state!=audio_playing)
- if (p->f_eject) cc_SpinDown();
- p->diskstate_flags &= ~cd_size_bit;
- p->open_count=0;
-#ifdef SAFE_MIXED
- p->has_data=0;
-#endif /* SAFE_MIXED */
- }
- }
- up(&ioctl_read_sem);
- return ;
-}
-/*==========================================================================*/
-/*
- *
- */
-static int sbpcd_media_changed( struct cdrom_device_info *cdi, int disc_nr);
-static struct cdrom_device_ops sbpcd_dops = {
- .open = sbpcd_open,
- .release = sbpcd_release,
- .drive_status = sbpcd_drive_status,
- .media_changed = sbpcd_media_changed,
- .tray_move = sbpcd_tray_move,
- .lock_door = sbpcd_lock_door,
- .select_speed = sbpcd_select_speed,
- .get_last_session = sbpcd_get_last_session,
- .get_mcn = sbpcd_get_mcn,
- .reset = sbpcd_reset,
- .audio_ioctl = sbpcd_audio_ioctl,
- .capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK |
- CDC_MULTI_SESSION | CDC_MEDIA_CHANGED |
- CDC_MCN | CDC_PLAY_AUDIO,
- .n_minors = 1,
-};
-
-/*==========================================================================*/
-/*
- * accept "kernel command line" parameters
- * (suggested by Peter MacDonald with SLS 1.03)
- *
- * This is only implemented for the first controller. Should be enough to
- * allow installing with a "strange" distribution kernel.
- *
- * use: tell LILO:
- * sbpcd=0x230,SoundBlaster
- * or
- * sbpcd=0x300,LaserMate
- * or
- * sbpcd=0x338,SoundScape
- * or
- * sbpcd=0x2C0,Teac16bit
- *
- * (upper/lower case sensitive here - but all-lowercase is ok!!!).
- *
- * the address value has to be the CDROM PORT ADDRESS -
- * not the soundcard base address.
- * For the SPEA/SoundScape setup, DO NOT specify the "configuration port"
- * address, but the address which is really used for the CDROM (usually 8
- * bytes above).
- *
- */
-
-int sbpcd_setup(char *s)
-{
-#ifndef MODULE
- int p[4];
- (void)get_options(s, ARRAY_SIZE(p), p);
- setup_done++;
- msg(DBG_INI,"sbpcd_setup called with %04X,%s\n",p[1], s);
- sbpro_type=0; /* default: "LaserMate" */
- if (p[0]>1) sbpro_type=p[2];
- else if (!strcmp(s,str_sb)) sbpro_type=1;
- else if (!strcmp(s,str_sb_l)) sbpro_type=1;
- else if (!strcmp(s,str_sp)) sbpro_type=2;
- else if (!strcmp(s,str_sp_l)) sbpro_type=2;
- else if (!strcmp(s,str_ss)) sbpro_type=2;
- else if (!strcmp(s,str_ss_l)) sbpro_type=2;
- else if (!strcmp(s,str_t16)) sbpro_type=3;
- else if (!strcmp(s,str_t16_l)) sbpro_type=3;
- if (p[0]>0) sbpcd_ioaddr=p[1];
- if (p[0]>2) max_drives=p[3];
-#else
- sbpcd_ioaddr = sbpcd[0];
- sbpro_type = sbpcd[1];
-#endif
-
- CDo_command=sbpcd_ioaddr;
- CDi_info=sbpcd_ioaddr;
- CDi_status=sbpcd_ioaddr+1;
- CDo_sel_i_d=sbpcd_ioaddr+1;
- CDo_reset=sbpcd_ioaddr+2;
- CDo_enable=sbpcd_ioaddr+3;
- f_16bit=0;
- if ((sbpro_type==1)||(sbpro_type==3))
- {
- CDi_data=sbpcd_ioaddr;
- if (sbpro_type==3)
- {
- f_16bit=1;
- sbpro_type=1;
- }
- }
- else CDi_data=sbpcd_ioaddr+2;
-
- return 1;
-}
-
-__setup("sbpcd=", sbpcd_setup);
-
-
-/*==========================================================================*/
-/*
- * Sequoia S-1000 CD-ROM Interface Configuration
- * as used within SPEA Media FX, Ensonic SoundScape and some Reveal cards
- * The soundcard has to get jumpered for the interface type "Panasonic"
- * (not Sony or Mitsumi) and to get soft-configured for
- * -> configuration port address
- * -> CDROM port offset (num_ports): has to be 8 here. Possibly this
- * offset value determines the interface type (none, Panasonic,
- * Mitsumi, Sony).
- * The interface uses a configuration port (0x320, 0x330, 0x340, 0x350)
- * some bytes below the real CDROM address.
- *
- * For the Panasonic style (LaserMate) interface and the configuration
- * port 0x330, we have to use an offset of 8; so, the real CDROM port
- * address is 0x338.
- */
-static int __init config_spea(void)
-{
- /*
- * base address offset between configuration port and CDROM port,
- * this probably defines the interface type
- * 2 (type=??): 0x00
- * 8 (type=LaserMate):0x10
- * 16 (type=??):0x20
- * 32 (type=??):0x30
- */
- int n_ports=0x10;
-
- int irq_number=0; /* off:0x00, 2/9:0x01, 7:0x03, 12:0x05, 15:0x07 */
- int dma_channel=0; /* off: 0x00, 0:0x08, 1:0x18, 3:0x38, 5:0x58, 6:0x68 */
- int dack_polarity=0; /* L:0x00, H:0x80 */
- int drq_polarity=0x40; /* L:0x00, H:0x40 */
- int i;
-
-#define SPEA_REG_1 sbpcd_ioaddr-0x08+4
-#define SPEA_REG_2 sbpcd_ioaddr-0x08+5
-
- OUT(SPEA_REG_1,0xFF);
- i=inb(SPEA_REG_1);
- if (i!=0x0F)
- {
- msg(DBG_SEQ,"no SPEA interface at %04X present.\n", sbpcd_ioaddr);
- return (-1); /* no interface found */
- }
- OUT(SPEA_REG_1,0x04);
- OUT(SPEA_REG_2,0xC0);
-
- OUT(SPEA_REG_1,0x05);
- OUT(SPEA_REG_2,0x10|drq_polarity|dack_polarity);
-
-#if 1
-#define SPEA_PATTERN 0x80
-#else
-#define SPEA_PATTERN 0x00
-#endif
- OUT(SPEA_REG_1,0x06);
- OUT(SPEA_REG_2,dma_channel|irq_number|SPEA_PATTERN);
- OUT(SPEA_REG_2,dma_channel|irq_number|SPEA_PATTERN);
-
- OUT(SPEA_REG_1,0x09);
- i=(inb(SPEA_REG_2)&0xCF)|n_ports;
- OUT(SPEA_REG_2,i);
-
- sbpro_type = 0; /* acts like a LaserMate interface now */
- msg(DBG_SEQ,"found SoundScape interface at %04X.\n", sbpcd_ioaddr);
- return (0);
-}
-
-/*==========================================================================*/
-/*
- * Test for presence of drive and initialize it.
- * Called once at boot or load time.
- */
-
-/* FIXME: cleanups after failed allocations are too ugly for words */
-#ifdef MODULE
-int __init __sbpcd_init(void)
-#else
-int __init sbpcd_init(void)
-#endif
-{
- int i=0, j=0;
- int addr[2]={1, CDROM_PORT};
- int port_index;
-
- sti();
-
- msg(DBG_INF,"sbpcd.c %s\n", VERSION);
-#ifndef MODULE
-#if DISTRIBUTION
- if (!setup_done)
- {
- msg(DBG_INF,"Looking for Matsushita/Panasonic, CreativeLabs, Longshine, TEAC CD-ROM drives\n");
- msg(DBG_INF,"= = = = = = = = = = W A R N I N G = = = = = = = = = =\n");
- msg(DBG_INF,"Auto-Probing can cause a hang (f.e. touching an NE2000 card).\n");
- msg(DBG_INF,"If that happens, you have to reboot and use the\n");
- msg(DBG_INF,"LILO (kernel) command line feature like:\n");
- msg(DBG_INF," LILO boot: ... sbpcd=0x230,SoundBlaster\n");
- msg(DBG_INF,"or like:\n");
- msg(DBG_INF," LILO boot: ... sbpcd=0x300,LaserMate\n");
- msg(DBG_INF,"or like:\n");
- msg(DBG_INF," LILO boot: ... sbpcd=0x338,SoundScape\n");
- msg(DBG_INF,"with your REAL address.\n");
- msg(DBG_INF,"= = = = = = = = = = END of WARNING = = = = = == = = =\n");
- }
-#endif /* DISTRIBUTION */
- sbpcd[0]=sbpcd_ioaddr; /* possibly changed by kernel command line */
- sbpcd[1]=sbpro_type; /* possibly changed by kernel command line */
-#endif /* MODULE */
-
- for (port_index=0;port_index<NUM_PROBE;port_index+=2)
- {
- addr[1]=sbpcd[port_index];
- if (addr[1]==0) break;
- if (check_region(addr[1],4))
- {
- msg(DBG_INF,"check_region: %03X is not free.\n",addr[1]);
- continue;
- }
- if (sbpcd[port_index+1]==2) type=str_sp;
- else if (sbpcd[port_index+1]==1) type=str_sb;
- else if (sbpcd[port_index+1]==3) type=str_t16;
- else type=str_lm;
- sbpcd_setup((char *)type);
-#if DISTRIBUTION
- msg(DBG_INF,"Scanning 0x%X (%s)...\n", CDo_command, type);
-#endif /* DISTRIBUTION */
- if (sbpcd[port_index+1]==2)
- {
- i=config_spea();
- if (i<0) continue;
- }
-#ifdef PATH_CHECK
- if (check_card(addr[1])) continue;
-#endif /* PATH_CHECK */
- i=check_drives();
- msg(DBG_INI,"check_drives done.\n");
- if (i>=0) break; /* drive found */
- } /* end of cycling through the set of possible I/O port addresses */
-
- if (ndrives==0)
- {
- msg(DBG_INF, "No drive found.\n");
-#ifdef MODULE
- return -EIO;
-#else
- goto init_done;
-#endif /* MODULE */
- }
-
- if (port_index>0)
- {
- msg(DBG_INF, "You should read Documentation/cdrom/sbpcd\n");
- msg(DBG_INF, "and then configure sbpcd.h for your hardware.\n");
- }
- check_datarate();
- msg(DBG_INI,"check_datarate done.\n");
-
- for (j=0;j<NR_SBPCD;j++)
- {
- struct sbpcd_drive *p = D_S + j;
- if (p->drv_id==-1)
- continue;
- switch_drive(p);
-#if 1
- if (!famL_drive) cc_DriveReset();
-#endif
- if (!st_spinning) cc_SpinUp();
- p->sbp_first_frame = -1; /* First frame in buffer */
- p->sbp_last_frame = -1; /* Last frame in buffer */
- p->sbp_read_frames = 0; /* Number of frames being read to buffer */
- p->sbp_current = 0; /* Frame being currently read */
- p->CD_changed=1;
- p->frame_size=CD_FRAMESIZE;
- p->f_eject=0;
-#if EJECT
- if (!fam0_drive) p->f_eject=1;
-#endif /* EJECT */
- cc_ReadStatus();
- i=ResponseStatus(); /* returns orig. status or p_busy_new */
- if (famT_drive) i=ResponseStatus(); /* returns orig. status or p_busy_new */
- if (i<0)
- {
- if (i!=-402)
- msg(DBG_INF,"init: ResponseStatus returns %d.\n",i);
- }
- else
- {
- if (st_check)
- {
- i=cc_ReadError();
- msg(DBG_INI,"init: cc_ReadError returns %d\n",i);
- }
- }
- msg(DBG_INI,"init: first GetStatus: %d\n",i);
- msg(DBG_LCS,"init: first GetStatus: error_byte=%d\n",
- p->error_byte);
- if (p->error_byte==aud_12)
- {
- timeout=jiffies+2*HZ;
- do
- {
- i=GetStatus();
- msg(DBG_INI,"init: second GetStatus: %02X\n",i);
- msg(DBG_LCS,
- "init: second GetStatus: error_byte=%d\n",
- p->error_byte);
- if (i<0) break;
- if (!st_caddy_in) break;
- }
- while ((!st_diskok)||time_after(jiffies, timeout));
- }
- i=SetSpeed();
- if (i>=0) p->CD_changed=1;
- }
-
- if (!request_region(CDo_command,4,major_name))
- {
- printk(KERN_WARNING "sbpcd: Unable to request region 0x%x\n", CDo_command);
- return -EIO;
- }
-
- /*
- * Turn on the CD audio channels.
- * The addresses are obtained from SOUND_BASE (see sbpcd.h).
- */
-#if SOUND_BASE
- OUT(MIXER_addr,MIXER_CD_Volume); /* select SB Pro mixer register */
- OUT(MIXER_data,0xCC); /* one nibble per channel, max. value: 0xFF */
-#endif /* SOUND_BASE */
-
- if (register_blkdev(MAJOR_NR, major_name)) {
-#ifdef MODULE
- return -EIO;
-#else
- goto init_done;
-#endif /* MODULE */
- }
-
- /*
- * init error handling is broken beyond belief in this driver...
- */
- sbpcd_queue = blk_init_queue(do_sbpcd_request, &sbpcd_lock);
- if (!sbpcd_queue) {
- release_region(CDo_command,4);
- unregister_blkdev(MAJOR_NR, major_name);
- return -ENOMEM;
- }
-
- for (j=0;j<NR_SBPCD;j++)
- {
- struct cdrom_device_info * sbpcd_infop;
- struct gendisk *disk;
- struct sbpcd_drive *p = D_S + j;
-
- if (p->drv_id==-1) continue;
- switch_drive(p);
-#ifdef SAFE_MIXED
- p->has_data=0;
-#endif /* SAFE_MIXED */
- /*
- * allocate memory for the frame buffers
- */
- p->aud_buf=NULL;
- p->sbp_audsiz=0;
- p->sbp_bufsiz=buffers;
- if (p->drv_type&drv_fam1)
- if (READ_AUDIO>0)
- p->sbp_audsiz = READ_AUDIO;
- p->sbp_buf=(u_char *) vmalloc(buffers*CD_FRAMESIZE);
- if (!p->sbp_buf) {
- msg(DBG_INF,"data buffer (%d frames) not available.\n",
- buffers);
- if ((unregister_blkdev(MAJOR_NR, major_name) == -EINVAL))
- {
- printk("Can't unregister %s\n", major_name);
- }
- release_region(CDo_command,4);
- blk_cleanup_queue(sbpcd_queue);
- return -EIO;
- }
-#ifdef MODULE
- msg(DBG_INF,"data buffer size: %d frames.\n",buffers);
-#endif /* MODULE */
- if (p->sbp_audsiz>0)
- {
- p->aud_buf=(u_char *) vmalloc(p->sbp_audsiz*CD_FRAMESIZE_RAW);
- if (p->aud_buf==NULL) msg(DBG_INF,"audio buffer (%d frames) not available.\n",p->sbp_audsiz);
- else msg(DBG_INF,"audio buffer size: %d frames.\n",p->sbp_audsiz);
- }
- sbpcd_infop = vmalloc(sizeof (struct cdrom_device_info));
- if (sbpcd_infop == NULL)
- {
- release_region(CDo_command,4);
- blk_cleanup_queue(sbpcd_queue);
- return -ENOMEM;
- }
- memset(sbpcd_infop, 0, sizeof(struct cdrom_device_info));
- sbpcd_infop->ops = &sbpcd_dops;
- sbpcd_infop->speed = 2;
- sbpcd_infop->capacity = 1;
- sprintf(sbpcd_infop->name, "sbpcd%d", j);
- sbpcd_infop->handle = p;
- p->sbpcd_infop = sbpcd_infop;
- disk = alloc_disk(1);
- disk->major = MAJOR_NR;
- disk->first_minor = j;
- disk->fops = &sbpcd_bdops;
- strcpy(disk->disk_name, sbpcd_infop->name);
- disk->flags = GENHD_FL_CD;
- p->disk = disk;
- if (register_cdrom(sbpcd_infop))
- {
- printk(" sbpcd: Unable to register with Uniform CD-ROm driver\n");
- }
- disk->private_data = p;
- disk->queue = sbpcd_queue;
- add_disk(disk);
- }
- blk_queue_hardsect_size(sbpcd_queue, CD_FRAMESIZE);
-
-#ifndef MODULE
- init_done:
-#endif
- return 0;
-}
-/*==========================================================================*/
-#ifdef MODULE
-static void sbpcd_exit(void)
-{
- int j;
-
- if ((unregister_blkdev(MAJOR_NR, major_name) == -EINVAL))
- {
- msg(DBG_INF, "What's that: can't unregister %s.\n", major_name);
- return;
- }
- release_region(CDo_command,4);
- blk_cleanup_queue(sbpcd_queue);
- for (j=0;j<NR_SBPCD;j++)
- {
- if (D_S[j].drv_id==-1) continue;
- del_gendisk(D_S[j].disk);
- put_disk(D_S[j].disk);
- vfree(D_S[j].sbp_buf);
- if (D_S[j].sbp_audsiz>0)
- vfree(D_S[j].aud_buf);
- if ((unregister_cdrom(D_S[j].sbpcd_infop) == -EINVAL))
- {
- msg(DBG_INF, "What's that: can't unregister info %s.\n", major_name);
- return;
- }
- vfree(D_S[j].sbpcd_infop);
- }
- msg(DBG_INF, "%s module released.\n", major_name);
-}
-
-
-module_init(__sbpcd_init) /*HACK!*/;
-module_exit(sbpcd_exit);
-
-
-#endif /* MODULE */
-static int sbpcd_media_changed(struct cdrom_device_info *cdi, int disc_nr)
-{
- struct sbpcd_drive *p = cdi->handle;
- msg(DBG_CHK,"media_check (%s) called\n", cdi->name);
-
- if (p->CD_changed==0xFF)
- {
- p->CD_changed=0;
- msg(DBG_CHK,"medium changed (drive %s)\n", cdi->name);
- current_drive->diskstate_flags &= ~toc_bit;
- /* we *don't* need invalidate here, it's done by caller */
- current_drive->diskstate_flags &= ~cd_size_bit;
-#ifdef SAFE_MIXED
- current_drive->has_data=0;
-#endif /* SAFE_MIXED */
-
- return (1);
- }
- else
- return (0);
-}
-
-MODULE_LICENSE("GPL");
-/* FIXME: Old modules.conf claims MATSUSHITA_CDROM2_MAJOR and CDROM3, but
- AFAICT this doesn't support those majors, so why? --RR 30 Jul 2003 */
-MODULE_ALIAS_BLOCKDEV_MAJOR(MATSUSHITA_CDROM_MAJOR);
-
-/*==========================================================================*/
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 8
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -8
- * c-argdecl-indent: 8
- * c-label-offset: -8
- * c-continued-statement-offset: 8
- * c-continued-brace-offset: 0
- * End:
- */
-
diff --git a/drivers/cdrom/sbpcd.h b/drivers/cdrom/sbpcd.h
deleted file mode 100644
index 2f2225f13c6f..000000000000
--- a/drivers/cdrom/sbpcd.h
+++ /dev/null
@@ -1,839 +0,0 @@
-/*
- * sbpcd.h Specify interface address and interface type here.
- */
-
-/*
- * Attention! This file contains user-serviceable parts!
- * I recommend to make use of it...
- * If you feel helpless, look into Documentation/cdrom/sbpcd
- * (good idea anyway, at least before mailing me).
- *
- * The definitions for the first controller can get overridden by
- * the kernel command line ("lilo boot option").
- * Examples:
- * sbpcd=0x300,LaserMate
- * or
- * sbpcd=0x230,SoundBlaster
- * or
- * sbpcd=0x338,SoundScape
- * or
- * sbpcd=0x2C0,Teac16bit
- *
- * If sbpcd gets used as a module, you can load it with
- * insmod sbpcd.o sbpcd=0x300,0
- * or
- * insmod sbpcd.o sbpcd=0x230,1
- * or
- * insmod sbpcd.o sbpcd=0x338,2
- * or
- * insmod sbpcd.o sbpcd=0x2C0,3
- * respective to override the configured address and type.
- */
-
-/*
- * define your CDROM port base address as CDROM_PORT
- * and specify the type of your interface card as SBPRO.
- *
- * address:
- * ========
- * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ...
- * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ...
- * SOUNDSCAPE addresses are from the LASERMATE type and range. You have to
- * specify the REAL address here, not the configuration port address. Look
- * at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let
- * sbpcd auto-probe, if you are not firm with the address.
- * There are some soundcards on the market with 0x0630, 0x0650, ...; their
- * type is not obvious (both types are possible).
- *
- * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1.
- * if your soundcard has its CDROM port above 0x300, specify
- * that address and try SBPRO 0 first.
- * if your SoundScape configuration port is at 0x330, specify
- * 0x338 and SBPRO 2.
- *
- * interface type:
- * ===============
- * set SBPRO to 1 for "true" SoundBlaster card
- * set SBPRO to 0 for "compatible" soundcards and
- * for "poor" (no sound) interface cards.
- * set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards
- * set SBPRO to 3 for Teac 16bit interface cards
- *
- * Almost all "compatible" sound boards need to set SBPRO to 0.
- * If SBPRO is set wrong, the drives will get found - but any
- * data access will give errors (audio access will work).
- * The "OmniCD" no-sound interface card from CreativeLabs and most Teac
- * interface cards need SBPRO 1.
- *
- * sound base:
- * ===========
- * The SOUND_BASE definition tells if we should try to turn the CD sound
- * channels on. It will only be of use regarding soundcards with a SbPro
- * compatible mixer.
- *
- * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels
- * #define SOUND_BASE 0 leaves the soundcard untouched
- */
-#define CDROM_PORT 0x340 /* <-----------<< port address */
-#define SBPRO 0 /* <-----------<< interface type */
-#define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
-#define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0 */
-
-/*
- * some more or less user dependent definitions - service them!
- */
-
-/* Set this to 0 once you have configured your interface definitions right. */
-#define DISTRIBUTION 1
-
-/*
- * Time to wait after giving a message.
- * This gets important if you enable non-standard DBG_xxx flags.
- * You will see what happens if you omit the pause or make it
- * too short. Be warned!
- */
-#define KLOGD_PAUSE 1
-
-/* tray control: eject tray if no disk is in */
-#if DISTRIBUTION
-#define JUKEBOX 0
-#else
-#define JUKEBOX 1
-#endif /* DISTRIBUTION */
-
-/* tray control: eject tray after last use */
-#if DISTRIBUTION
-#define EJECT 0
-#else
-#define EJECT 1
-#endif /* DISTRIBUTION */
-
-/* max. number of audio frames to read with one */
-/* request (allocates n* 2352 bytes kernel memory!) */
-/* may be freely adjusted, f.e. 75 (= 1 sec.), at */
-/* runtime by use of the CDROMAUDIOBUFSIZ ioctl. */
-#define READ_AUDIO 0
-
-/* Optimizations for the Teac CD-55A drive read performance.
- * SBP_TEAC_SPEED can be changed here, or one can set the
- * variable "teac" when loading as a module.
- * Valid settings are:
- * 0 - very slow - the recommended "DISTRIBUTION 1" setup.
- * 1 - 2x performance with little overhead. No busy waiting.
- * 2 - 4x performance with 5ms overhead per read. Busy wait.
- *
- * Setting SBP_TEAC_SPEED or the variable 'teac' to anything
- * other than 0 may cause problems. If you run into them, first
- * change SBP_TEAC_SPEED back to 0 and see if your drive responds
- * normally. If yes, you are "allowed" to report your case - to help
- * me with the driver, not to solve your hassle. Don´t mail if you
- * simply are stuck into your own "tuning" experiments, you know?
- */
-#define SBP_TEAC_SPEED 1
-
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * nothing to change below here if you are not fully aware what you're doing
- */
-#ifndef _LINUX_SBPCD_H
-
-#define _LINUX_SBPCD_H
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * driver's own read_ahead, data mode
- */
-#define SBP_BUFFER_FRAMES 8
-
-#define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */
-#undef FUTURE
-#undef SAFE_MIXED
-
-#define TEST_UPC 0
-#define SPEA_TEST 0
-#define TEST_STI 0
-#define OLD_BUSY 0
-#undef PATH_CHECK
-#ifndef SOUND_BASE
-#define SOUND_BASE 0
-#endif
-#if DISTRIBUTION
-#undef SBP_TEAC_SPEED
-#define SBP_TEAC_SPEED 0
-#endif
-/*==========================================================================*/
-/*
- * DDI interface definitions
- * "invented" by Fred N. van Kempen..
- */
-#define DDIOCSDBG 0x9000
-
-/*==========================================================================*/
-/*
- * "private" IOCTL functions
- */
-#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */
-
-/*==========================================================================*/
-/*
- * Debug output levels
- */
-#define DBG_INF 1 /* necessary information */
-#define DBG_BSZ 2 /* BLOCK_SIZE trace */
-#define DBG_REA 3 /* READ status trace */
-#define DBG_CHK 4 /* MEDIA CHECK trace */
-#define DBG_TIM 5 /* datarate timer test */
-#define DBG_INI 6 /* initialization trace */
-#define DBG_TOC 7 /* tell TocEntry values */
-#define DBG_IOC 8 /* ioctl trace */
-#define DBG_STA 9 /* ResponseStatus() trace */
-#define DBG_ERR 10 /* cc_ReadError() trace */
-#define DBG_CMD 11 /* cmd_out() trace */
-#define DBG_WRN 12 /* give explanation before auto-probing */
-#define DBG_MUL 13 /* multi session code test */
-#define DBG_IDX 14 /* test code for drive_id !=0 */
-#define DBG_IOX 15 /* some special information */
-#define DBG_DID 16 /* drive ID test */
-#define DBG_RES 17 /* drive reset info */
-#define DBG_SPI 18 /* SpinUp test */
-#define DBG_IOS 19 /* ioctl trace: subchannel functions */
-#define DBG_IO2 20 /* ioctl trace: general */
-#define DBG_UPC 21 /* show UPC information */
-#define DBG_XA1 22 /* XA mode debugging */
-#define DBG_LCK 23 /* door (un)lock info */
-#define DBG_SQ1 24 /* dump SubQ frame */
-#define DBG_AUD 25 /* READ AUDIO debugging */
-#define DBG_SEQ 26 /* Sequoia interface configuration trace */
-#define DBG_LCS 27 /* Longshine LCS-7260 debugging trace */
-#define DBG_CD2 28 /* MKE/Funai CD200 debugging trace */
-#define DBG_TEA 29 /* TEAC CD-55A debugging trace */
-#define DBG_ECS 30 /* ECS-AT (Vertos 100) debugging trace */
-#define DBG_000 31 /* unnecessary information */
-
-/*==========================================================================*/
-/*==========================================================================*/
-
-/*
- * bits of flags_cmd_out:
- */
-#define f_respo3 0x100
-#define f_putcmd 0x80
-#define f_respo2 0x40
-#define f_lopsta 0x20
-#define f_getsta 0x10
-#define f_ResponseStatus 0x08
-#define f_obey_p_check 0x04
-#define f_bit1 0x02
-#define f_wait_if_busy 0x01
-
-/*
- * diskstate_flags:
- */
-#define x80_bit 0x80
-#define upc_bit 0x40
-#define volume_bit 0x20
-#define toc_bit 0x10
-#define multisession_bit 0x08
-#define cd_size_bit 0x04
-#define subq_bit 0x02
-#define frame_size_bit 0x01
-
-/*
- * disk states (bits of diskstate_flags):
- */
-#define upc_valid (current_drive->diskstate_flags&upc_bit)
-#define volume_valid (current_drive->diskstate_flags&volume_bit)
-#define toc_valid (current_drive->diskstate_flags&toc_bit)
-#define cd_size_valid (current_drive->diskstate_flags&cd_size_bit)
-#define subq_valid (current_drive->diskstate_flags&subq_bit)
-#define frame_size_valid (current_drive->diskstate_flags&frame_size_bit)
-
-/*
- * the status_bits variable
- */
-#define p_success 0x100
-#define p_door_closed 0x80
-#define p_caddy_in 0x40
-#define p_spinning 0x20
-#define p_check 0x10
-#define p_busy_new 0x08
-#define p_door_locked 0x04
-#define p_disk_ok 0x01
-
-/*
- * LCS-7260 special status result bits:
- */
-#define p_lcs_door_locked 0x02
-#define p_lcs_door_closed 0x01 /* probably disk_in */
-
-/*
- * CR-52x special status result bits:
- */
-#define p_caddin_old 0x40
-#define p_success_old 0x08
-#define p_busy_old 0x04
-#define p_bit_1 0x02 /* hopefully unused now */
-
-/*
- * "generation specific" defs of the status result bits:
- */
-#define p0_door_closed 0x80
-#define p0_caddy_in 0x40
-#define p0_spinning 0x20
-#define p0_check 0x10
-#define p0_success 0x08 /* unused */
-#define p0_busy 0x04
-#define p0_bit_1 0x02 /* unused */
-#define p0_disk_ok 0x01
-
-#define pL_disk_in 0x40
-#define pL_spinning 0x20
-#define pL_check 0x10
-#define pL_success 0x08 /* unused ?? */
-#define pL_busy 0x04
-#define pL_door_locked 0x02
-#define pL_door_closed 0x01
-
-#define pV_door_closed 0x40
-#define pV_spinning 0x20
-#define pV_check 0x10
-#define pV_success 0x08
-#define pV_busy 0x04
-#define pV_door_locked 0x02
-#define pV_disk_ok 0x01
-
-#define p1_door_closed 0x80
-#define p1_disk_in 0x40
-#define p1_spinning 0x20
-#define p1_check 0x10
-#define p1_busy 0x08
-#define p1_door_locked 0x04
-#define p1_bit_1 0x02 /* unused */
-#define p1_disk_ok 0x01
-
-#define p2_disk_ok 0x80
-#define p2_door_locked 0x40
-#define p2_spinning 0x20
-#define p2_busy2 0x10
-#define p2_busy1 0x08
-#define p2_door_closed 0x04
-#define p2_disk_in 0x02
-#define p2_check 0x01
-
-/*
- * used drive states:
- */
-#define st_door_closed (current_drive->status_bits&p_door_closed)
-#define st_caddy_in (current_drive->status_bits&p_caddy_in)
-#define st_spinning (current_drive->status_bits&p_spinning)
-#define st_check (current_drive->status_bits&p_check)
-#define st_busy (current_drive->status_bits&p_busy_new)
-#define st_door_locked (current_drive->status_bits&p_door_locked)
-#define st_diskok (current_drive->status_bits&p_disk_ok)
-
-/*
- * bits of the CDi_status register:
- */
-#define s_not_result_ready 0x04 /* 0: "result ready" */
-#define s_not_data_ready 0x02 /* 0: "data ready" */
-#define s_attention 0x01 /* 1: "attention required" */
-/*
- * usable as:
- */
-#define DRV_ATTN ((inb(CDi_status)&s_attention)!=0)
-#define DATA_READY ((inb(CDi_status)&s_not_data_ready)==0)
-#define RESULT_READY ((inb(CDi_status)&s_not_result_ready)==0)
-
-/*
- * drive families and types (firmware versions):
- */
-#define drv_fam0 0x0100 /* CR-52x family */
-#define drv_199 (drv_fam0+0x01) /* <200 */
-#define drv_200 (drv_fam0+0x02) /* <201 */
-#define drv_201 (drv_fam0+0x03) /* <210 */
-#define drv_210 (drv_fam0+0x04) /* <211 */
-#define drv_211 (drv_fam0+0x05) /* <300 */
-#define drv_300 (drv_fam0+0x06) /* >=300 */
-
-#define drv_fam1 0x0200 /* CR-56x family */
-#define drv_099 (drv_fam1+0x01) /* <100 */
-#define drv_100 (drv_fam1+0x02) /* >=100, only 1.02 and 5.00 known */
-
-#define drv_fam2 0x0400 /* CD200 family */
-
-#define drv_famT 0x0800 /* TEAC CD-55A */
-
-#define drv_famL 0x1000 /* Longshine family */
-#define drv_260 (drv_famL+0x01) /* LCS-7260 */
-#define drv_e1 (drv_famL+0x01) /* LCS-7260, firmware "A E1" */
-#define drv_f4 (drv_famL+0x02) /* LCS-7260, firmware "A4F4" */
-
-#define drv_famV 0x2000 /* ECS-AT (vertos-100) family */
-#define drv_at (drv_famV+0x01) /* ECS-AT, firmware "1.00" */
-
-#define fam0_drive (current_drive->drv_type&drv_fam0)
-#define famL_drive (current_drive->drv_type&drv_famL)
-#define famV_drive (current_drive->drv_type&drv_famV)
-#define fam1_drive (current_drive->drv_type&drv_fam1)
-#define fam2_drive (current_drive->drv_type&drv_fam2)
-#define famT_drive (current_drive->drv_type&drv_famT)
-#define fam0L_drive (current_drive->drv_type&(drv_fam0|drv_famL))
-#define fam0V_drive (current_drive->drv_type&(drv_fam0|drv_famV))
-#define famLV_drive (current_drive->drv_type&(drv_famL|drv_famV))
-#define fam0LV_drive (current_drive->drv_type&(drv_fam0|drv_famL|drv_famV))
-#define fam1L_drive (current_drive->drv_type&(drv_fam1|drv_famL))
-#define fam1V_drive (current_drive->drv_type&(drv_fam1|drv_famV))
-#define fam1LV_drive (current_drive->drv_type&(drv_fam1|drv_famL|drv_famV))
-#define fam01_drive (current_drive->drv_type&(drv_fam0|drv_fam1))
-#define fam12_drive (current_drive->drv_type&(drv_fam1|drv_fam2))
-#define fam2T_drive (current_drive->drv_type&(drv_fam2|drv_famT))
-
-/*
- * audio states:
- */
-#define audio_completed 3 /* Forgot this one! --AJK */
-#define audio_playing 2
-#define audio_pausing 1
-
-/*
- * drv_pattern, drv_options:
- */
-#define speed_auto 0x80
-#define speed_300 0x40
-#define speed_150 0x20
-#define audio_mono 0x04
-
-/*
- * values of cmd_type (0 else):
- */
-#define READ_M1 0x01 /* "data mode 1": 2048 bytes per frame */
-#define READ_M2 0x02 /* "data mode 2": 12+2048+280 bytes per frame */
-#define READ_SC 0x04 /* "subchannel info": 96 bytes per frame */
-#define READ_AU 0x08 /* "audio frame": 2352 bytes per frame */
-
-/*
- * sense_byte:
- *
- * values: 00
- * 01
- * 81
- * 82 "raw audio" mode
- * xx from infobuf[0] after 85 00 00 00 00 00 00
- */
-
-/* audio status (bin) */
-#define aud_00 0x00 /* Audio status byte not supported or not valid */
-#define audx11 0x0b /* Audio play operation in progress */
-#define audx12 0x0c /* Audio play operation paused */
-#define audx13 0x0d /* Audio play operation successfully completed */
-#define audx14 0x0e /* Audio play operation stopped due to error */
-#define audx15 0x0f /* No current audio status to return */
-/* audio status (bcd) */
-#define aud_11 0x11 /* Audio play operation in progress */
-#define aud_12 0x12 /* Audio play operation paused */
-#define aud_13 0x13 /* Audio play operation successfully completed */
-#define aud_14 0x14 /* Audio play operation stopped due to error */
-#define aud_15 0x15 /* No current audio status to return */
-
-/*
- * highest allowed drive number (MINOR+1)
- */
-#define NR_SBPCD 4
-
-/*
- * we try to never disable interrupts - seems to work
- */
-#define SBPCD_DIS_IRQ 0
-
-/*
- * "write byte to port"
- */
-#define OUT(x,y) outb(y,x)
-
-/*==========================================================================*/
-
-#define MIXER_addr SOUND_BASE+4 /* sound card's address register */
-#define MIXER_data SOUND_BASE+5 /* sound card's data register */
-#define MIXER_CD_Volume 0x28 /* internal SB Pro register address */
-
-/*==========================================================================*/
-
-#define MAX_TRACKS 99
-
-#define ERR_DISKCHANGE 615
-
-/*==========================================================================*/
-/*
- * To make conversions easier (machine dependent!)
- */
-typedef union _msf
-{
- u_int n;
- u_char c[4];
-} MSF;
-
-typedef union _blk
-{
- u_int n;
- u_char c[4];
-} BLK;
-
-/*==========================================================================*/
-
-/*============================================================================
-==============================================================================
-
-COMMAND SET of "old" drives like CR-521, CR-522
- (the CR-562 family is different):
-
-No. Command Code
---------------------------------------------
-
-Drive Commands:
- 1 Seek 01
- 2 Read Data 02
- 3 Read XA-Data 03
- 4 Read Header 04
- 5 Spin Up 05
- 6 Spin Down 06
- 7 Diagnostic 07
- 8 Read UPC 08
- 9 Read ISRC 09
-10 Play Audio 0A
-11 Play Audio MSF 0B
-12 Play Audio Track/Index 0C
-
-Status Commands:
-13 Read Status 81
-14 Read Error 82
-15 Read Drive Version 83
-16 Mode Select 84
-17 Mode Sense 85
-18 Set XA Parameter 86
-19 Read XA Parameter 87
-20 Read Capacity 88
-21 Read SUB_Q 89
-22 Read Disc Code 8A
-23 Read Disc Information 8B
-24 Read TOC 8C
-25 Pause/Resume 8D
-26 Read Packet 8E
-27 Read Path Check 00
-
-
-all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first
-
-mnemo 7-byte command #bytes response (r0...rn)
-________ ____________________ ____
-
-Read Status:
-status: 81. (1) one-byte command, gives the main
- status byte
-Read Error:
-check1: 82 00 00 00 00 00 00. (6) r1: audio status
-
-Read Packet:
-check2: 8e xx 00 00 00 00 00. (xx) gets xx bytes response, relating
- to commands 01 04 05 07 08 09
-
-Play Audio:
-play: 0a ll-bb-aa nn-nn-nn. (0) play audio, ll-bb-aa: starting block (lba),
- nn-nn-nn: #blocks
-Play Audio MSF:
- 0b mm-ss-ff mm-ss-ff (0) play audio from/to
-
-Play Audio Track/Index:
- 0c ...
-
-Pause/Resume:
-pause: 8d pr 00 00 00 00 00. (0) pause (pr=00)
- resume (pr=80) audio playing
-
-Mode Select:
- 84 00 nn-nn ??.?? 00 (0) nn-nn: 2048 or 2340
- possibly defines transfer size
-
-set_vol: 84 83 00 00 sw le 00. (0) sw(itch): lrxxxxxx (off=1)
- le(vel): min=0, max=FF, else half
- (firmware 2.11)
-
-Mode Sense:
-get_vol: 85 03 00 00 00 00 00. (2) tell current audio volume setting
-
-Read Disc Information:
-tocdesc: 8b 00 00 00 00 00 00. (6) read the toc descriptor ("msf-bin"-format)
-
-Read TOC:
-tocent: 8c fl nn 00 00 00 00. (8) read toc entry #nn
- (fl=0:"lba"-, =2:"msf-bin"-format)
-
-Read Capacity:
-capacit: 88 00 00 00 00 00 00. (5) "read CD-ROM capacity"
-
-
-Read Path Check:
-ping: 00 00 00 00 00 00 00. (2) r0=AA, r1=55
- ("ping" if the drive is connected)
-
-Read Drive Version:
-ident: 83 00 00 00 00 00 00. (12) gives "MATSHITAn.nn"
- (n.nn = 2.01, 2.11., 3.00, ...)
-
-Seek:
-seek: 01 00 ll-bb-aa 00 00. (0)
-seek: 01 02 mm-ss-ff 00 00. (0)
-
-Read Data:
-read: 02 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2048 bytes,
- starting at block xx-xx-xx
- fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
-
-Read XA-Data:
-read: 03 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2340 bytes,
- starting at block xx-xx-xx
- fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
-
-Read SUB_Q:
- 89 fl 00 00 00 00 00. (13) r0: audio status, r4-r7: lba/msf,
- fl=0: "lba", fl=2: "msf"
-
-Read Disc Code:
- 8a 00 00 00 00 00 00. (14) possibly extended "check condition"-info
-
-Read Header:
- 04 00 ll-bb-aa 00 00. (0) 4 bytes response with "check2"
- 04 02 mm-ss-ff 00 00. (0) 4 bytes response with "check2"
-
-Spin Up:
- 05 00 ll-bb-aa 00 00. (0) possibly implies a "seek"
-
-Spin Down:
- 06 ...
-
-Diagnostic:
- 07 00 ll-bb-aa 00 00. (2) 2 bytes response with "check2"
- 07 02 mm-ss-ff 00 00. (2) 2 bytes response with "check2"
-
-Read UPC:
- 08 00 ll-bb-aa 00 00. (16)
- 08 02 mm-ss-ff 00 00. (16)
-
-Read ISRC:
- 09 00 ll-bb-aa 00 00. (15) 15 bytes response with "check2"
- 09 02 mm-ss-ff 00 00. (15) 15 bytes response with "check2"
-
-Set XA Parameter:
- 86 ...
-
-Read XA Parameter:
- 87 ...
-
-==============================================================================
-============================================================================*/
-
-/*
- * commands
- *
- * CR-52x: CMD0_
- * CR-56x: CMD1_
- * CD200: CMD2_
- * LCS-7260: CMDL_
- * TEAC CD-55A: CMDT_
- * ECS-AT: CMDV_
- */
-#define CMD1_RESET 0x0a
-#define CMD2_RESET 0x01
-#define CMDT_RESET 0xc0
-
-#define CMD1_LOCK_CTL 0x0c
-#define CMD2_LOCK_CTL 0x1e
-#define CMDT_LOCK_CTL CMD2_LOCK_CTL
-#define CMDL_LOCK_CTL 0x0e
-#define CMDV_LOCK_CTL CMDL_LOCK_CTL
-
-#define CMD1_TRAY_CTL 0x07
-#define CMD2_TRAY_CTL 0x1b
-#define CMDT_TRAY_CTL CMD2_TRAY_CTL
-#define CMDL_TRAY_CTL 0x0d
-#define CMDV_TRAY_CTL CMDL_TRAY_CTL
-
-#define CMD1_MULTISESS 0x8d
-#define CMDL_MULTISESS 0x8c
-#define CMDV_MULTISESS CMDL_MULTISESS
-
-#define CMD1_SUBCHANINF 0x11
-#define CMD2_SUBCHANINF 0x??
-
-#define CMD1_ABORT 0x08
-#define CMD2_ABORT 0x08
-#define CMDT_ABORT 0x08
-
-#define CMD2_x02 0x02
-
-#define CMD2_SETSPEED 0xda
-
-#define CMD0_PATH_CHECK 0x00
-#define CMD1_PATH_CHECK 0x???
-#define CMD2_PATH_CHECK 0x???
-#define CMDT_PATH_CHECK 0x???
-#define CMDL_PATH_CHECK CMD0_PATH_CHECK
-#define CMDV_PATH_CHECK CMD0_PATH_CHECK
-
-#define CMD0_SEEK 0x01
-#define CMD1_SEEK CMD0_SEEK
-#define CMD2_SEEK 0x2b
-#define CMDT_SEEK CMD2_SEEK
-#define CMDL_SEEK CMD0_SEEK
-#define CMDV_SEEK CMD0_SEEK
-
-#define CMD0_READ 0x02
-#define CMD1_READ 0x10
-#define CMD2_READ 0x28
-#define CMDT_READ CMD2_READ
-#define CMDL_READ CMD0_READ
-#define CMDV_READ CMD0_READ
-
-#define CMD0_READ_XA 0x03
-#define CMD2_READ_XA 0xd4
-#define CMD2_READ_XA2 0xd5
-#define CMDL_READ_XA CMD0_READ_XA /* really ?? */
-#define CMDV_READ_XA CMD0_READ_XA
-
-#define CMD0_READ_HEAD 0x04
-
-#define CMD0_SPINUP 0x05
-#define CMD1_SPINUP 0x02
-#define CMD2_SPINUP CMD2_TRAY_CTL
-#define CMDL_SPINUP CMD0_SPINUP
-#define CMDV_SPINUP CMD0_SPINUP
-
-#define CMD0_SPINDOWN 0x06 /* really??? */
-#define CMD1_SPINDOWN 0x06
-#define CMD2_SPINDOWN CMD2_TRAY_CTL
-#define CMDL_SPINDOWN 0x0d
-#define CMDV_SPINDOWN CMD0_SPINDOWN
-
-#define CMD0_DIAG 0x07
-
-#define CMD0_READ_UPC 0x08
-#define CMD1_READ_UPC 0x88
-#define CMD2_READ_UPC 0x???
-#define CMDL_READ_UPC CMD0_READ_UPC
-#define CMDV_READ_UPC 0x8f
-
-#define CMD0_READ_ISRC 0x09
-
-#define CMD0_PLAY 0x0a
-#define CMD1_PLAY 0x???
-#define CMD2_PLAY 0x???
-#define CMDL_PLAY CMD0_PLAY
-#define CMDV_PLAY CMD0_PLAY
-
-#define CMD0_PLAY_MSF 0x0b
-#define CMD1_PLAY_MSF 0x0e
-#define CMD2_PLAY_MSF 0x47
-#define CMDT_PLAY_MSF CMD2_PLAY_MSF
-#define CMDL_PLAY_MSF 0x???
-
-#define CMD0_PLAY_TI 0x0c
-#define CMD1_PLAY_TI 0x0f
-
-#define CMD0_STATUS 0x81
-#define CMD1_STATUS 0x05
-#define CMD2_STATUS 0x00
-#define CMDT_STATUS CMD2_STATUS
-#define CMDL_STATUS CMD0_STATUS
-#define CMDV_STATUS CMD0_STATUS
-#define CMD2_SEEK_LEADIN 0x00
-
-#define CMD0_READ_ERR 0x82
-#define CMD1_READ_ERR CMD0_READ_ERR
-#define CMD2_READ_ERR 0x03
-#define CMDT_READ_ERR CMD2_READ_ERR /* get audio status */
-#define CMDL_READ_ERR CMD0_READ_ERR
-#define CMDV_READ_ERR CMD0_READ_ERR
-
-#define CMD0_READ_VER 0x83
-#define CMD1_READ_VER CMD0_READ_VER
-#define CMD2_READ_VER 0x12
-#define CMDT_READ_VER CMD2_READ_VER /* really ?? */
-#define CMDL_READ_VER CMD0_READ_VER
-#define CMDV_READ_VER CMD0_READ_VER
-
-#define CMD0_SETMODE 0x84
-#define CMD1_SETMODE 0x09
-#define CMD2_SETMODE 0x55
-#define CMDT_SETMODE CMD2_SETMODE
-#define CMDL_SETMODE CMD0_SETMODE
-
-#define CMD0_GETMODE 0x85
-#define CMD1_GETMODE 0x84
-#define CMD2_GETMODE 0x5a
-#define CMDT_GETMODE CMD2_GETMODE
-#define CMDL_GETMODE CMD0_GETMODE
-
-#define CMD0_SET_XA 0x86
-
-#define CMD0_GET_XA 0x87
-
-#define CMD0_CAPACITY 0x88
-#define CMD1_CAPACITY 0x85
-#define CMD2_CAPACITY 0x25
-#define CMDL_CAPACITY CMD0_CAPACITY /* missing in some firmware versions */
-
-#define CMD0_READSUBQ 0x89
-#define CMD1_READSUBQ 0x87
-#define CMD2_READSUBQ 0x42
-#define CMDT_READSUBQ CMD2_READSUBQ
-#define CMDL_READSUBQ CMD0_READSUBQ
-#define CMDV_READSUBQ CMD0_READSUBQ
-
-#define CMD0_DISKCODE 0x8a
-
-#define CMD0_DISKINFO 0x8b
-#define CMD1_DISKINFO CMD0_DISKINFO
-#define CMD2_DISKINFO 0x43
-#define CMDT_DISKINFO CMD2_DISKINFO
-#define CMDL_DISKINFO CMD0_DISKINFO
-#define CMDV_DISKINFO CMD0_DISKINFO
-
-#define CMD0_READTOC 0x8c
-#define CMD1_READTOC CMD0_READTOC
-#define CMD2_READTOC 0x???
-#define CMDL_READTOC CMD0_READTOC
-#define CMDV_READTOC CMD0_READTOC
-
-#define CMD0_PAU_RES 0x8d
-#define CMD1_PAU_RES 0x0d
-#define CMD2_PAU_RES 0x4b
-#define CMDT_PAUSE CMD2_PAU_RES
-#define CMDL_PAU_RES CMD0_PAU_RES
-#define CMDV_PAUSE CMD0_PAU_RES
-
-#define CMD0_PACKET 0x8e
-#define CMD1_PACKET CMD0_PACKET
-#define CMD2_PACKET 0x???
-#define CMDL_PACKET CMD0_PACKET
-#define CMDV_PACKET 0x???
-
-/*==========================================================================*/
-/*==========================================================================*/
-#endif /* _LINUX_SBPCD_H */
-/*==========================================================================*/
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 8
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -8
- * c-argdecl-indent: 8
- * c-label-offset: -8
- * c-continued-statement-offset: 8
- * c-continued-brace-offset: 0
- * End:
- */
diff --git a/drivers/cdrom/sjcd.c b/drivers/cdrom/sjcd.c
deleted file mode 100644
index 76c24e679e68..000000000000
--- a/drivers/cdrom/sjcd.c
+++ /dev/null
@@ -1,1815 +0,0 @@
-/* -- sjcd.c
- *
- * Sanyo CD-ROM device driver implementation, Version 1.6
- * Copyright (C) 1995 Vadim V. Model
- *
- * model@cecmow.enet.dec.com
- * vadim@rbrf.ru
- * vadim@ipsun.ras.ru
- *
- *
- * This driver is based on pre-works by Eberhard Moenkeberg (emoenke@gwdg.de);
- * it was developed under use of mcd.c from Martin Harriss, with help of
- * Eric van der Maarel (H.T.M.v.d.Maarel@marin.nl).
- *
- * It is planned to include these routines into sbpcd.c later - to make
- * a "mixed use" on one cable possible for all kinds of drives which use
- * the SoundBlaster/Panasonic style CDROM interface. But today, the
- * ability to install directly from CDROM is more important than flexibility.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * History:
- * 1.1 First public release with kernel version 1.3.7.
- * Written by Vadim Model.
- * 1.2 Added detection and configuration of cdrom interface
- * on ISP16 soundcard.
- * Allow for command line options: sjcd=<io_base>,<irq>,<dma>
- * 1.3 Some minor changes to README.sjcd.
- * 1.4 MSS Sound support!! Listen to a CD through the speakers.
- * 1.5 Module support and bugfixes.
- * Tray locking.
- * 1.6 Removed ISP16 code from this driver.
- * Allow only to set io base address on command line: sjcd=<io_base>
- * Changes to Documentation/cdrom/sjcd
- * Added cleanup after any error in the initialisation.
- * 1.7 Added code to set the sector size tables to prevent the bug present in
- * the previous version of this driver. Coded added by Anthony Barbachan
- * from bugfix tip originally suggested by Alan Cox.
- *
- * November 1999 -- Make kernel-parameter implementation work with 2.3.x
- * Removed init_module & cleanup_module in favor of
- * module_init & module_exit.
- * Torben Mathiasen <tmm@image.dk>
- */
-
-#define SJCD_VERSION_MAJOR 1
-#define SJCD_VERSION_MINOR 7
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/major.h>
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <linux/blkdev.h>
-#include "sjcd.h"
-
-static int sjcd_present = 0;
-static struct request_queue *sjcd_queue;
-
-#define MAJOR_NR SANYO_CDROM_MAJOR
-#define QUEUE (sjcd_queue)
-#define CURRENT elv_next_request(sjcd_queue)
-
-#define SJCD_BUF_SIZ 32 /* cdr-h94a has internal 64K buffer */
-
-/*
- * buffer for block size conversion
- */
-static char sjcd_buf[2048 * SJCD_BUF_SIZ];
-static volatile int sjcd_buf_bn[SJCD_BUF_SIZ], sjcd_next_bn;
-static volatile int sjcd_buf_in, sjcd_buf_out = -1;
-
-/*
- * Status.
- */
-static unsigned short sjcd_status_valid = 0;
-static unsigned short sjcd_door_closed;
-static unsigned short sjcd_door_was_open;
-static unsigned short sjcd_media_is_available;
-static unsigned short sjcd_media_is_changed;
-static unsigned short sjcd_toc_uptodate = 0;
-static unsigned short sjcd_command_failed;
-static volatile unsigned char sjcd_completion_status = 0;
-static volatile unsigned char sjcd_completion_error = 0;
-static unsigned short sjcd_command_is_in_progress = 0;
-static unsigned short sjcd_error_reported = 0;
-static DEFINE_SPINLOCK(sjcd_lock);
-
-static int sjcd_open_count;
-
-static int sjcd_audio_status;
-static struct sjcd_play_msf sjcd_playing;
-
-static int sjcd_base = SJCD_BASE_ADDR;
-
-module_param(sjcd_base, int, 0);
-
-static DECLARE_WAIT_QUEUE_HEAD(sjcd_waitq);
-
-/*
- * Data transfer.
- */
-static volatile unsigned short sjcd_transfer_is_active = 0;
-
-enum sjcd_transfer_state {
- SJCD_S_IDLE = 0,
- SJCD_S_START = 1,
- SJCD_S_MODE = 2,
- SJCD_S_READ = 3,
- SJCD_S_DATA = 4,
- SJCD_S_STOP = 5,
- SJCD_S_STOPPING = 6
-};
-static enum sjcd_transfer_state sjcd_transfer_state = SJCD_S_IDLE;
-static long sjcd_transfer_timeout = 0;
-static int sjcd_read_count = 0;
-static unsigned char sjcd_mode = 0;
-
-#define SJCD_READ_TIMEOUT 5000
-
-#if defined( SJCD_GATHER_STAT )
-/*
- * Statistic.
- */
-static struct sjcd_stat statistic;
-#endif
-
-/*
- * Timer.
- */
-static DEFINE_TIMER(sjcd_delay_timer, NULL, 0, 0);
-
-#define SJCD_SET_TIMER( func, tmout ) \
- ( sjcd_delay_timer.expires = jiffies+tmout, \
- sjcd_delay_timer.function = ( void * )func, \
- add_timer( &sjcd_delay_timer ) )
-
-#define CLEAR_TIMER del_timer( &sjcd_delay_timer )
-
-/*
- * Set up device, i.e., use command line data to set
- * base address.
- */
-#ifndef MODULE
-static int __init sjcd_setup(char *str)
-{
- int ints[2];
- (void) get_options(str, ARRAY_SIZE(ints), ints);
- if (ints[0] > 0)
- sjcd_base = ints[1];
-
- return 1;
-}
-
-__setup("sjcd=", sjcd_setup);
-
-#endif
-
-/*
- * Special converters.
- */
-static unsigned char bin2bcd(int bin)
-{
- int u, v;
-
- u = bin % 10;
- v = bin / 10;
- return (u | (v << 4));
-}
-
-static int bcd2bin(unsigned char bcd)
-{
- return ((bcd >> 4) * 10 + (bcd & 0x0F));
-}
-
-static long msf2hsg(struct msf *mp)
-{
- return (bcd2bin(mp->frame) + bcd2bin(mp->sec) * 75
- + bcd2bin(mp->min) * 4500 - 150);
-}
-
-static void hsg2msf(long hsg, struct msf *msf)
-{
- hsg += 150;
- msf->min = hsg / 4500;
- hsg %= 4500;
- msf->sec = hsg / 75;
- msf->frame = hsg % 75;
- msf->min = bin2bcd(msf->min); /* convert to BCD */
- msf->sec = bin2bcd(msf->sec);
- msf->frame = bin2bcd(msf->frame);
-}
-
-/*
- * Send a command to cdrom. Invalidate status.
- */
-static void sjcd_send_cmd(unsigned char cmd)
-{
-#if defined( SJCD_TRACE )
- printk("SJCD: send_cmd( 0x%x )\n", cmd);
-#endif
- outb(cmd, SJCDPORT(0));
- sjcd_command_is_in_progress = 1;
- sjcd_status_valid = 0;
- sjcd_command_failed = 0;
-}
-
-/*
- * Send a command with one arg to cdrom. Invalidate status.
- */
-static void sjcd_send_1_cmd(unsigned char cmd, unsigned char a)
-{
-#if defined( SJCD_TRACE )
- printk("SJCD: send_1_cmd( 0x%x, 0x%x )\n", cmd, a);
-#endif
- outb(cmd, SJCDPORT(0));
- outb(a, SJCDPORT(0));
- sjcd_command_is_in_progress = 1;
- sjcd_status_valid = 0;
- sjcd_command_failed = 0;
-}
-
-/*
- * Send a command with four args to cdrom. Invalidate status.
- */
-static void sjcd_send_4_cmd(unsigned char cmd, unsigned char a,
- unsigned char b, unsigned char c,
- unsigned char d)
-{
-#if defined( SJCD_TRACE )
- printk("SJCD: send_4_cmd( 0x%x )\n", cmd);
-#endif
- outb(cmd, SJCDPORT(0));
- outb(a, SJCDPORT(0));
- outb(b, SJCDPORT(0));
- outb(c, SJCDPORT(0));
- outb(d, SJCDPORT(0));
- sjcd_command_is_in_progress = 1;
- sjcd_status_valid = 0;
- sjcd_command_failed = 0;
-}
-
-/*
- * Send a play or read command to cdrom. Invalidate Status.
- */
-static void sjcd_send_6_cmd(unsigned char cmd, struct sjcd_play_msf *pms)
-{
-#if defined( SJCD_TRACE )
- printk("SJCD: send_long_cmd( 0x%x )\n", cmd);
-#endif
- outb(cmd, SJCDPORT(0));
- outb(pms->start.min, SJCDPORT(0));
- outb(pms->start.sec, SJCDPORT(0));
- outb(pms->start.frame, SJCDPORT(0));
- outb(pms->end.min, SJCDPORT(0));
- outb(pms->end.sec, SJCDPORT(0));
- outb(pms->end.frame, SJCDPORT(0));
- sjcd_command_is_in_progress = 1;
- sjcd_status_valid = 0;
- sjcd_command_failed = 0;
-}
-
-/*
- * Get a value from the data port. Should not block, so we use a little
- * wait for a while. Returns 0 if OK.
- */
-static int sjcd_load_response(void *buf, int len)
-{
- unsigned char *resp = (unsigned char *) buf;
-
- for (; len; --len) {
- int i;
- for (i = 200;
- i-- && !SJCD_STATUS_AVAILABLE(inb(SJCDPORT(1))););
- if (i > 0)
- *resp++ = (unsigned char) inb(SJCDPORT(0));
- else
- break;
- }
- return (len);
-}
-
-/*
- * Load and parse command completion status (drive info byte and maybe error).
- * Sorry, no error classification yet.
- */
-static void sjcd_load_status(void)
-{
- sjcd_media_is_changed = 0;
- sjcd_completion_error = 0;
- sjcd_completion_status = inb(SJCDPORT(0));
- if (sjcd_completion_status & SST_DOOR_OPENED) {
- sjcd_door_closed = sjcd_media_is_available = 0;
- } else {
- sjcd_door_closed = 1;
- if (sjcd_completion_status & SST_MEDIA_CHANGED)
- sjcd_media_is_available = sjcd_media_is_changed =
- 1;
- else if (sjcd_completion_status & 0x0F) {
- /*
- * OK, we seem to catch an error ...
- */
- while (!SJCD_STATUS_AVAILABLE(inb(SJCDPORT(1))));
- sjcd_completion_error = inb(SJCDPORT(0));
- if ((sjcd_completion_status & 0x08) &&
- (sjcd_completion_error & 0x40))
- sjcd_media_is_available = 0;
- else
- sjcd_command_failed = 1;
- } else
- sjcd_media_is_available = 1;
- }
- /*
- * Ok, status loaded successfully.
- */
- sjcd_status_valid = 1, sjcd_error_reported = 0;
- sjcd_command_is_in_progress = 0;
-
- /*
- * If the disk is changed, the TOC is not valid.
- */
- if (sjcd_media_is_changed)
- sjcd_toc_uptodate = 0;
-#if defined( SJCD_TRACE )
- printk("SJCD: status %02x.%02x loaded.\n",
- (int) sjcd_completion_status, (int) sjcd_completion_error);
-#endif
-}
-
-/*
- * Read status from cdrom. Check to see if the status is available.
- */
-static int sjcd_check_status(void)
-{
- /*
- * Try to load the response from cdrom into buffer.
- */
- if (SJCD_STATUS_AVAILABLE(inb(SJCDPORT(1)))) {
- sjcd_load_status();
- return (1);
- } else {
- /*
- * No status is available.
- */
- return (0);
- }
-}
-
-/*
- * This is just timeout counter, and nothing more. Surprised ? :-)
- */
-static volatile long sjcd_status_timeout;
-
-/*
- * We need about 10 seconds to wait. The longest command takes about 5 seconds
- * to probe the disk (usually after tray closed or drive reset). Other values
- * should be thought of for other commands.
- */
-#define SJCD_WAIT_FOR_STATUS_TIMEOUT 1000
-
-static void sjcd_status_timer(void)
-{
- if (sjcd_check_status()) {
- /*
- * The command completed and status is loaded, stop waiting.
- */
- wake_up(&sjcd_waitq);
- } else if (--sjcd_status_timeout <= 0) {
- /*
- * We are timed out.
- */
- wake_up(&sjcd_waitq);
- } else {
- /*
- * We have still some time to wait. Try again.
- */
- SJCD_SET_TIMER(sjcd_status_timer, 1);
- }
-}
-
-/*
- * Wait for status for 10 sec approx. Returns non-positive when timed out.
- * Should not be used while reading data CDs.
- */
-static int sjcd_wait_for_status(void)
-{
- sjcd_status_timeout = SJCD_WAIT_FOR_STATUS_TIMEOUT;
- SJCD_SET_TIMER(sjcd_status_timer, 1);
- sleep_on(&sjcd_waitq);
-#if defined( SJCD_DIAGNOSTIC ) || defined ( SJCD_TRACE )
- if (sjcd_status_timeout <= 0)
- printk("SJCD: Error Wait For Status.\n");
-#endif
- return (sjcd_status_timeout);
-}
-
-static int sjcd_receive_status(void)
-{
- int i;
-#if defined( SJCD_TRACE )
- printk("SJCD: receive_status\n");
-#endif
- /*
- * Wait a bit for status available.
- */
- for (i = 200; i-- && (sjcd_check_status() == 0););
- if (i < 0) {
-#if defined( SJCD_TRACE )
- printk("SJCD: long wait for status\n");
-#endif
- if (sjcd_wait_for_status() <= 0)
- printk("SJCD: Timeout when read status.\n");
- else
- i = 0;
- }
- return (i);
-}
-
-/*
- * Load the status. Issue get status command and wait for status available.
- */
-static void sjcd_get_status(void)
-{
-#if defined( SJCD_TRACE )
- printk("SJCD: get_status\n");
-#endif
- sjcd_send_cmd(SCMD_GET_STATUS);
- sjcd_receive_status();
-}
-
-/*
- * Check the drive if the disk is changed. Should be revised.
- */
-static int sjcd_disk_change(struct gendisk *disk)
-{
-#if 0
- printk("SJCD: sjcd_disk_change(%s)\n", disk->disk_name);
-#endif
- if (!sjcd_command_is_in_progress)
- sjcd_get_status();
- return (sjcd_status_valid ? sjcd_media_is_changed : 0);
-}
-
-/*
- * Read the table of contents (TOC) and TOC header if necessary.
- * We assume that the drive contains no more than 99 toc entries.
- */
-static struct sjcd_hw_disk_info sjcd_table_of_contents[SJCD_MAX_TRACKS];
-static unsigned char sjcd_first_track_no, sjcd_last_track_no;
-#define sjcd_disk_length sjcd_table_of_contents[0].un.track_msf
-
-static int sjcd_update_toc(void)
-{
- struct sjcd_hw_disk_info info;
- int i;
-#if defined( SJCD_TRACE )
- printk("SJCD: update toc:\n");
-#endif
- /*
- * check to see if we need to do anything
- */
- if (sjcd_toc_uptodate)
- return (0);
-
- /*
- * Get the TOC start information.
- */
- sjcd_send_1_cmd(SCMD_GET_DISK_INFO, SCMD_GET_1_TRACK);
- sjcd_receive_status();
-
- if (!sjcd_status_valid) {
- printk("SJCD: cannot load status.\n");
- return (-1);
- }
-
- if (!sjcd_media_is_available) {
- printk("SJCD: no disk in drive\n");
- return (-1);
- }
-
- if (!sjcd_command_failed) {
- if (sjcd_load_response(&info, sizeof(info)) != 0) {
- printk
- ("SJCD: cannot load response about TOC start.\n");
- return (-1);
- }
- sjcd_first_track_no = bcd2bin(info.un.track_no);
- } else {
- printk("SJCD: get first failed\n");
- return (-1);
- }
-#if defined( SJCD_TRACE )
- printk("SJCD: TOC start 0x%02x ", sjcd_first_track_no);
-#endif
- /*
- * Get the TOC finish information.
- */
- sjcd_send_1_cmd(SCMD_GET_DISK_INFO, SCMD_GET_L_TRACK);
- sjcd_receive_status();
-
- if (!sjcd_status_valid) {
- printk("SJCD: cannot load status.\n");
- return (-1);
- }
-
- if (!sjcd_media_is_available) {
- printk("SJCD: no disk in drive\n");
- return (-1);
- }
-
- if (!sjcd_command_failed) {
- if (sjcd_load_response(&info, sizeof(info)) != 0) {
- printk
- ("SJCD: cannot load response about TOC finish.\n");
- return (-1);
- }
- sjcd_last_track_no = bcd2bin(info.un.track_no);
- } else {
- printk("SJCD: get last failed\n");
- return (-1);
- }
-#if defined( SJCD_TRACE )
- printk("SJCD: TOC finish 0x%02x ", sjcd_last_track_no);
-#endif
- for (i = sjcd_first_track_no; i <= sjcd_last_track_no; i++) {
- /*
- * Get the first track information.
- */
- sjcd_send_1_cmd(SCMD_GET_DISK_INFO, bin2bcd(i));
- sjcd_receive_status();
-
- if (!sjcd_status_valid) {
- printk("SJCD: cannot load status.\n");
- return (-1);
- }
-
- if (!sjcd_media_is_available) {
- printk("SJCD: no disk in drive\n");
- return (-1);
- }
-
- if (!sjcd_command_failed) {
- if (sjcd_load_response(&sjcd_table_of_contents[i],
- sizeof(struct
- sjcd_hw_disk_info))
- != 0) {
- printk
- ("SJCD: cannot load info for %d track\n",
- i);
- return (-1);
- }
- } else {
- printk("SJCD: get info %d failed\n", i);
- return (-1);
- }
- }
-
- /*
- * Get the disk length info.
- */
- sjcd_send_1_cmd(SCMD_GET_DISK_INFO, SCMD_GET_D_SIZE);
- sjcd_receive_status();
-
- if (!sjcd_status_valid) {
- printk("SJCD: cannot load status.\n");
- return (-1);
- }
-
- if (!sjcd_media_is_available) {
- printk("SJCD: no disk in drive\n");
- return (-1);
- }
-
- if (!sjcd_command_failed) {
- if (sjcd_load_response(&info, sizeof(info)) != 0) {
- printk
- ("SJCD: cannot load response about disk size.\n");
- return (-1);
- }
- sjcd_disk_length.min = info.un.track_msf.min;
- sjcd_disk_length.sec = info.un.track_msf.sec;
- sjcd_disk_length.frame = info.un.track_msf.frame;
- } else {
- printk("SJCD: get size failed\n");
- return (1);
- }
-#if defined( SJCD_TRACE )
- printk("SJCD: (%02x:%02x.%02x)\n", sjcd_disk_length.min,
- sjcd_disk_length.sec, sjcd_disk_length.frame);
-#endif
- return (0);
-}
-
-/*
- * Load subchannel information.
- */
-static int sjcd_get_q_info(struct sjcd_hw_qinfo *qp)
-{
- int s;
-#if defined( SJCD_TRACE )
- printk("SJCD: load sub q\n");
-#endif
- sjcd_send_cmd(SCMD_GET_QINFO);
- s = sjcd_receive_status();
- if (s < 0 || sjcd_command_failed || !sjcd_status_valid) {
- sjcd_send_cmd(0xF2);
- s = sjcd_receive_status();
- if (s < 0 || sjcd_command_failed || !sjcd_status_valid)
- return (-1);
- sjcd_send_cmd(SCMD_GET_QINFO);
- s = sjcd_receive_status();
- if (s < 0 || sjcd_command_failed || !sjcd_status_valid)
- return (-1);
- }
- if (sjcd_media_is_available)
- if (sjcd_load_response(qp, sizeof(*qp)) == 0)
- return (0);
- return (-1);
-}
-
-/*
- * Start playing from the specified position.
- */
-static int sjcd_play(struct sjcd_play_msf *mp)
-{
- struct sjcd_play_msf msf;
-
- /*
- * Turn the device to play mode.
- */
- sjcd_send_1_cmd(SCMD_SET_MODE, SCMD_MODE_PLAY);
- if (sjcd_receive_status() < 0)
- return (-1);
-
- /*
- * Seek to the starting point.
- */
- msf.start = mp->start;
- msf.end.min = msf.end.sec = msf.end.frame = 0x00;
- sjcd_send_6_cmd(SCMD_SEEK, &msf);
- if (sjcd_receive_status() < 0)
- return (-1);
-
- /*
- * Start playing.
- */
- sjcd_send_6_cmd(SCMD_PLAY, mp);
- return (sjcd_receive_status());
-}
-
-/*
- * Tray control functions.
- */
-static int sjcd_tray_close(void)
-{
-#if defined( SJCD_TRACE )
- printk("SJCD: tray_close\n");
-#endif
- sjcd_send_cmd(SCMD_CLOSE_TRAY);
- return (sjcd_receive_status());
-}
-
-static int sjcd_tray_lock(void)
-{
-#if defined( SJCD_TRACE )
- printk("SJCD: tray_lock\n");
-#endif
- sjcd_send_cmd(SCMD_LOCK_TRAY);
- return (sjcd_receive_status());
-}
-
-static int sjcd_tray_unlock(void)
-{
-#if defined( SJCD_TRACE )
- printk("SJCD: tray_unlock\n");
-#endif
- sjcd_send_cmd(SCMD_UNLOCK_TRAY);
- return (sjcd_receive_status());
-}
-
-static int sjcd_tray_open(void)
-{
-#if defined( SJCD_TRACE )
- printk("SJCD: tray_open\n");
-#endif
- sjcd_send_cmd(SCMD_EJECT_TRAY);
- return (sjcd_receive_status());
-}
-
-/*
- * Do some user commands.
- */
-static int sjcd_ioctl(struct inode *ip, struct file *fp,
- unsigned int cmd, unsigned long arg)
-{
- void __user *argp = (void __user *)arg;
-#if defined( SJCD_TRACE )
- printk("SJCD:ioctl\n");
-#endif
-
- sjcd_get_status();
- if (!sjcd_status_valid)
- return (-EIO);
- if (sjcd_update_toc() < 0)
- return (-EIO);
-
- switch (cmd) {
- case CDROMSTART:{
-#if defined( SJCD_TRACE )
- printk("SJCD: ioctl: start\n");
-#endif
- return (0);
- }
-
- case CDROMSTOP:{
-#if defined( SJCD_TRACE )
- printk("SJCD: ioctl: stop\n");
-#endif
- sjcd_send_cmd(SCMD_PAUSE);
- (void) sjcd_receive_status();
- sjcd_audio_status = CDROM_AUDIO_NO_STATUS;
- return (0);
- }
-
- case CDROMPAUSE:{
- struct sjcd_hw_qinfo q_info;
-#if defined( SJCD_TRACE )
- printk("SJCD: ioctl: pause\n");
-#endif
- if (sjcd_audio_status == CDROM_AUDIO_PLAY) {
- sjcd_send_cmd(SCMD_PAUSE);
- (void) sjcd_receive_status();
- if (sjcd_get_q_info(&q_info) < 0) {
- sjcd_audio_status =
- CDROM_AUDIO_NO_STATUS;
- } else {
- sjcd_audio_status =
- CDROM_AUDIO_PAUSED;
- sjcd_playing.start = q_info.abs;
- }
- return (0);
- } else
- return (-EINVAL);
- }
-
- case CDROMRESUME:{
-#if defined( SJCD_TRACE )
- printk("SJCD: ioctl: resume\n");
-#endif
- if (sjcd_audio_status == CDROM_AUDIO_PAUSED) {
- /*
- * continue play starting at saved location
- */
- if (sjcd_play(&sjcd_playing) < 0) {
- sjcd_audio_status =
- CDROM_AUDIO_ERROR;
- return (-EIO);
- } else {
- sjcd_audio_status =
- CDROM_AUDIO_PLAY;
- return (0);
- }
- } else
- return (-EINVAL);
- }
-
- case CDROMPLAYTRKIND:{
- struct cdrom_ti ti;
- int s = -EFAULT;
-#if defined( SJCD_TRACE )
- printk("SJCD: ioctl: playtrkind\n");
-#endif
- if (!copy_from_user(&ti, argp, sizeof(ti))) {
- s = 0;
- if (ti.cdti_trk0 < sjcd_first_track_no)
- return (-EINVAL);
- if (ti.cdti_trk1 > sjcd_last_track_no)
- ti.cdti_trk1 = sjcd_last_track_no;
- if (ti.cdti_trk0 > ti.cdti_trk1)
- return (-EINVAL);
-
- sjcd_playing.start =
- sjcd_table_of_contents[ti.cdti_trk0].
- un.track_msf;
- sjcd_playing.end =
- (ti.cdti_trk1 <
- sjcd_last_track_no) ?
- sjcd_table_of_contents[ti.cdti_trk1 +
- 1].un.
- track_msf : sjcd_table_of_contents[0].
- un.track_msf;
-
- if (sjcd_play(&sjcd_playing) < 0) {
- sjcd_audio_status =
- CDROM_AUDIO_ERROR;
- return (-EIO);
- } else
- sjcd_audio_status =
- CDROM_AUDIO_PLAY;
- }
- return (s);
- }
-
- case CDROMPLAYMSF:{
- struct cdrom_msf sjcd_msf;
- int s;
-#if defined( SJCD_TRACE )
- printk("SJCD: ioctl: playmsf\n");
-#endif
- if ((s =
- access_ok(VERIFY_READ, argp, sizeof(sjcd_msf))
- ? 0 : -EFAULT) == 0) {
- if (sjcd_audio_status == CDROM_AUDIO_PLAY) {
- sjcd_send_cmd(SCMD_PAUSE);
- (void) sjcd_receive_status();
- sjcd_audio_status =
- CDROM_AUDIO_NO_STATUS;
- }
-
- if (copy_from_user(&sjcd_msf, argp,
- sizeof(sjcd_msf)))
- return (-EFAULT);
-
- sjcd_playing.start.min =
- bin2bcd(sjcd_msf.cdmsf_min0);
- sjcd_playing.start.sec =
- bin2bcd(sjcd_msf.cdmsf_sec0);
- sjcd_playing.start.frame =
- bin2bcd(sjcd_msf.cdmsf_frame0);
- sjcd_playing.end.min =
- bin2bcd(sjcd_msf.cdmsf_min1);
- sjcd_playing.end.sec =
- bin2bcd(sjcd_msf.cdmsf_sec1);
- sjcd_playing.end.frame =
- bin2bcd(sjcd_msf.cdmsf_frame1);
-
- if (sjcd_play(&sjcd_playing) < 0) {
- sjcd_audio_status =
- CDROM_AUDIO_ERROR;
- return (-EIO);
- } else
- sjcd_audio_status =
- CDROM_AUDIO_PLAY;
- }
- return (s);
- }
-
- case CDROMREADTOCHDR:{
- struct cdrom_tochdr toc_header;
-#if defined (SJCD_TRACE )
- printk("SJCD: ioctl: readtocheader\n");
-#endif
- toc_header.cdth_trk0 = sjcd_first_track_no;
- toc_header.cdth_trk1 = sjcd_last_track_no;
- if (copy_to_user(argp, &toc_header,
- sizeof(toc_header)))
- return -EFAULT;
- return 0;
- }
-
- case CDROMREADTOCENTRY:{
- struct cdrom_tocentry toc_entry;
- int s;
-#if defined( SJCD_TRACE )
- printk("SJCD: ioctl: readtocentry\n");
-#endif
- if ((s =
- access_ok(VERIFY_WRITE, argp, sizeof(toc_entry))
- ? 0 : -EFAULT) == 0) {
- struct sjcd_hw_disk_info *tp;
-
- if (copy_from_user(&toc_entry, argp,
- sizeof(toc_entry)))
- return (-EFAULT);
- if (toc_entry.cdte_track == CDROM_LEADOUT)
- tp = &sjcd_table_of_contents[0];
- else if (toc_entry.cdte_track <
- sjcd_first_track_no)
- return (-EINVAL);
- else if (toc_entry.cdte_track >
- sjcd_last_track_no)
- return (-EINVAL);
- else
- tp = &sjcd_table_of_contents
- [toc_entry.cdte_track];
-
- toc_entry.cdte_adr =
- tp->track_control & 0x0F;
- toc_entry.cdte_ctrl =
- tp->track_control >> 4;
-
- switch (toc_entry.cdte_format) {
- case CDROM_LBA:
- toc_entry.cdte_addr.lba =
- msf2hsg(&(tp->un.track_msf));
- break;
- case CDROM_MSF:
- toc_entry.cdte_addr.msf.minute =
- bcd2bin(tp->un.track_msf.min);
- toc_entry.cdte_addr.msf.second =
- bcd2bin(tp->un.track_msf.sec);
- toc_entry.cdte_addr.msf.frame =
- bcd2bin(tp->un.track_msf.
- frame);
- break;
- default:
- return (-EINVAL);
- }
- if (copy_to_user(argp, &toc_entry,
- sizeof(toc_entry)))
- s = -EFAULT;
- }
- return (s);
- }
-
- case CDROMSUBCHNL:{
- struct cdrom_subchnl subchnl;
- int s;
-#if defined( SJCD_TRACE )
- printk("SJCD: ioctl: subchnl\n");
-#endif
- if ((s =
- access_ok(VERIFY_WRITE, argp, sizeof(subchnl))
- ? 0 : -EFAULT) == 0) {
- struct sjcd_hw_qinfo q_info;
-
- if (copy_from_user(&subchnl, argp,
- sizeof(subchnl)))
- return (-EFAULT);
-
- if (sjcd_get_q_info(&q_info) < 0)
- return (-EIO);
-
- subchnl.cdsc_audiostatus =
- sjcd_audio_status;
- subchnl.cdsc_adr =
- q_info.track_control & 0x0F;
- subchnl.cdsc_ctrl =
- q_info.track_control >> 4;
- subchnl.cdsc_trk =
- bcd2bin(q_info.track_no);
- subchnl.cdsc_ind = bcd2bin(q_info.x);
-
- switch (subchnl.cdsc_format) {
- case CDROM_LBA:
- subchnl.cdsc_absaddr.lba =
- msf2hsg(&(q_info.abs));
- subchnl.cdsc_reladdr.lba =
- msf2hsg(&(q_info.rel));
- break;
- case CDROM_MSF:
- subchnl.cdsc_absaddr.msf.minute =
- bcd2bin(q_info.abs.min);
- subchnl.cdsc_absaddr.msf.second =
- bcd2bin(q_info.abs.sec);
- subchnl.cdsc_absaddr.msf.frame =
- bcd2bin(q_info.abs.frame);
- subchnl.cdsc_reladdr.msf.minute =
- bcd2bin(q_info.rel.min);
- subchnl.cdsc_reladdr.msf.second =
- bcd2bin(q_info.rel.sec);
- subchnl.cdsc_reladdr.msf.frame =
- bcd2bin(q_info.rel.frame);
- break;
- default:
- return (-EINVAL);
- }
- if (copy_to_user(argp, &subchnl,
- sizeof(subchnl)))
- s = -EFAULT;
- }
- return (s);
- }
-
- case CDROMVOLCTRL:{
- struct cdrom_volctrl vol_ctrl;
- int s;
-#if defined( SJCD_TRACE )
- printk("SJCD: ioctl: volctrl\n");
-#endif
- if ((s =
- access_ok(VERIFY_READ, argp, sizeof(vol_ctrl))
- ? 0 : -EFAULT) == 0) {
- unsigned char dummy[4];
-
- if (copy_from_user(&vol_ctrl, argp,
- sizeof(vol_ctrl)))
- return (-EFAULT);
- sjcd_send_4_cmd(SCMD_SET_VOLUME,
- vol_ctrl.channel0, 0xFF,
- vol_ctrl.channel1, 0xFF);
- if (sjcd_receive_status() < 0)
- return (-EIO);
- (void) sjcd_load_response(dummy, 4);
- }
- return (s);
- }
-
- case CDROMEJECT:{
-#if defined( SJCD_TRACE )
- printk("SJCD: ioctl: eject\n");
-#endif
- if (!sjcd_command_is_in_progress) {
- sjcd_tray_unlock();
- sjcd_send_cmd(SCMD_EJECT_TRAY);
- (void) sjcd_receive_status();
- }
- return (0);
- }
-
-#if defined( SJCD_GATHER_STAT )
- case 0xABCD:{
-#if defined( SJCD_TRACE )
- printk("SJCD: ioctl: statistic\n");
-#endif
- if (copy_to_user(argp, &statistic, sizeof(statistic)))
- return -EFAULT;
- return 0;
- }
-#endif
-
- default:
- return (-EINVAL);
- }
-}
-
-/*
- * Invalidate internal buffers of the driver.
- */
-static void sjcd_invalidate_buffers(void)
-{
- int i;
- for (i = 0; i < SJCD_BUF_SIZ; sjcd_buf_bn[i++] = -1);
- sjcd_buf_out = -1;
-}
-
-/*
- * Take care of the different block sizes between cdrom and Linux.
- * When Linux gets variable block sizes this will probably go away.
- */
-
-static int current_valid(void)
-{
- return CURRENT &&
- rq_data_dir(CURRENT) == READ &&
- CURRENT->sector != -1;
-}
-
-static void sjcd_transfer(void)
-{
-#if defined( SJCD_TRACE )
- printk("SJCD: transfer:\n");
-#endif
- if (current_valid()) {
- while (CURRENT->nr_sectors) {
- int i, bn = CURRENT->sector / 4;
- for (i = 0;
- i < SJCD_BUF_SIZ && sjcd_buf_bn[i] != bn;
- i++);
- if (i < SJCD_BUF_SIZ) {
- int offs =
- (i * 4 + (CURRENT->sector & 3)) * 512;
- int nr_sectors = 4 - (CURRENT->sector & 3);
- if (sjcd_buf_out != i) {
- sjcd_buf_out = i;
- if (sjcd_buf_bn[i] != bn) {
- sjcd_buf_out = -1;
- continue;
- }
- }
- if (nr_sectors > CURRENT->nr_sectors)
- nr_sectors = CURRENT->nr_sectors;
-#if defined( SJCD_TRACE )
- printk("SJCD: copy out\n");
-#endif
- memcpy(CURRENT->buffer, sjcd_buf + offs,
- nr_sectors * 512);
- CURRENT->nr_sectors -= nr_sectors;
- CURRENT->sector += nr_sectors;
- CURRENT->buffer += nr_sectors * 512;
- } else {
- sjcd_buf_out = -1;
- break;
- }
- }
- }
-#if defined( SJCD_TRACE )
- printk("SJCD: transfer: done\n");
-#endif
-}
-
-static void sjcd_poll(void)
-{
-#if defined( SJCD_GATHER_STAT )
- /*
- * Update total number of ticks.
- */
- statistic.ticks++;
- statistic.tticks[sjcd_transfer_state]++;
-#endif
-
- ReSwitch:switch (sjcd_transfer_state) {
-
- case SJCD_S_IDLE:{
-#if defined( SJCD_GATHER_STAT )
- statistic.idle_ticks++;
-#endif
-#if defined( SJCD_TRACE )
- printk("SJCD_S_IDLE\n");
-#endif
- return;
- }
-
- case SJCD_S_START:{
-#if defined( SJCD_GATHER_STAT )
- statistic.start_ticks++;
-#endif
- sjcd_send_cmd(SCMD_GET_STATUS);
- sjcd_transfer_state =
- sjcd_mode ==
- SCMD_MODE_COOKED ? SJCD_S_READ : SJCD_S_MODE;
- sjcd_transfer_timeout = 500;
-#if defined( SJCD_TRACE )
- printk("SJCD_S_START: goto SJCD_S_%s mode\n",
- sjcd_transfer_state ==
- SJCD_S_READ ? "READ" : "MODE");
-#endif
- break;
- }
-
- case SJCD_S_MODE:{
- if (sjcd_check_status()) {
- /*
- * Previous command is completed.
- */
- if (!sjcd_status_valid
- || sjcd_command_failed) {
-#if defined( SJCD_TRACE )
- printk
- ("SJCD_S_MODE: pre-cmd failed: goto to SJCD_S_STOP mode\n");
-#endif
- sjcd_transfer_state = SJCD_S_STOP;
- goto ReSwitch;
- }
-
- sjcd_mode = 0; /* unknown mode; should not be valid when failed */
- sjcd_send_1_cmd(SCMD_SET_MODE,
- SCMD_MODE_COOKED);
- sjcd_transfer_state = SJCD_S_READ;
- sjcd_transfer_timeout = 1000;
-#if defined( SJCD_TRACE )
- printk
- ("SJCD_S_MODE: goto SJCD_S_READ mode\n");
-#endif
- }
-#if defined( SJCD_GATHER_STAT )
- else
- statistic.mode_ticks++;
-#endif
- break;
- }
-
- case SJCD_S_READ:{
- if (sjcd_status_valid ? 1 : sjcd_check_status()) {
- /*
- * Previous command is completed.
- */
- if (!sjcd_status_valid
- || sjcd_command_failed) {
-#if defined( SJCD_TRACE )
- printk
- ("SJCD_S_READ: pre-cmd failed: goto to SJCD_S_STOP mode\n");
-#endif
- sjcd_transfer_state = SJCD_S_STOP;
- goto ReSwitch;
- }
- if (!sjcd_media_is_available) {
-#if defined( SJCD_TRACE )
- printk
- ("SJCD_S_READ: no disk: goto to SJCD_S_STOP mode\n");
-#endif
- sjcd_transfer_state = SJCD_S_STOP;
- goto ReSwitch;
- }
- if (sjcd_mode != SCMD_MODE_COOKED) {
- /*
- * We seem to come from set mode. So discard one byte of result.
- */
- if (sjcd_load_response
- (&sjcd_mode, 1) != 0) {
-#if defined( SJCD_TRACE )
- printk
- ("SJCD_S_READ: load failed: goto to SJCD_S_STOP mode\n");
-#endif
- sjcd_transfer_state =
- SJCD_S_STOP;
- goto ReSwitch;
- }
- if (sjcd_mode != SCMD_MODE_COOKED) {
-#if defined( SJCD_TRACE )
- printk
- ("SJCD_S_READ: mode failed: goto to SJCD_S_STOP mode\n");
-#endif
- sjcd_transfer_state =
- SJCD_S_STOP;
- goto ReSwitch;
- }
- }
-
- if (current_valid()) {
- struct sjcd_play_msf msf;
-
- sjcd_next_bn = CURRENT->sector / 4;
- hsg2msf(sjcd_next_bn, &msf.start);
- msf.end.min = 0;
- msf.end.sec = 0;
- msf.end.frame = sjcd_read_count =
- SJCD_BUF_SIZ;
-#if defined( SJCD_TRACE )
- printk
- ("SJCD: ---reading msf-address %x:%x:%x %x:%x:%x\n",
- msf.start.min, msf.start.sec,
- msf.start.frame, msf.end.min,
- msf.end.sec, msf.end.frame);
- printk
- ("sjcd_next_bn:%x buf_in:%x buf_out:%x buf_bn:%x\n",
- sjcd_next_bn, sjcd_buf_in,
- sjcd_buf_out,
- sjcd_buf_bn[sjcd_buf_in]);
-#endif
- sjcd_send_6_cmd(SCMD_DATA_READ,
- &msf);
- sjcd_transfer_state = SJCD_S_DATA;
- sjcd_transfer_timeout = 500;
-#if defined( SJCD_TRACE )
- printk
- ("SJCD_S_READ: go to SJCD_S_DATA mode\n");
-#endif
- } else {
-#if defined( SJCD_TRACE )
- printk
- ("SJCD_S_READ: nothing to read: go to SJCD_S_STOP mode\n");
-#endif
- sjcd_transfer_state = SJCD_S_STOP;
- goto ReSwitch;
- }
- }
-#if defined( SJCD_GATHER_STAT )
- else
- statistic.read_ticks++;
-#endif
- break;
- }
-
- case SJCD_S_DATA:{
- unsigned char stat;
-
- sjcd_s_data:stat =
- inb(SJCDPORT
- (1));
-#if defined( SJCD_TRACE )
- printk("SJCD_S_DATA: status = 0x%02x\n", stat);
-#endif
- if (SJCD_STATUS_AVAILABLE(stat)) {
- /*
- * No data is waiting for us in the drive buffer. Status of operation
- * completion is available. Read and parse it.
- */
- sjcd_load_status();
-
- if (!sjcd_status_valid
- || sjcd_command_failed) {
-#if defined( SJCD_TRACE )
- printk
- ("SJCD: read block %d failed, maybe audio disk? Giving up\n",
- sjcd_next_bn);
-#endif
- if (current_valid())
- end_request(CURRENT, 0);
-#if defined( SJCD_TRACE )
- printk
- ("SJCD_S_DATA: pre-cmd failed: go to SJCD_S_STOP mode\n");
-#endif
- sjcd_transfer_state = SJCD_S_STOP;
- goto ReSwitch;
- }
-
- if (!sjcd_media_is_available) {
- printk
- ("SJCD_S_DATA: no disk: go to SJCD_S_STOP mode\n");
- sjcd_transfer_state = SJCD_S_STOP;
- goto ReSwitch;
- }
-
- sjcd_transfer_state = SJCD_S_READ;
- goto ReSwitch;
- } else if (SJCD_DATA_AVAILABLE(stat)) {
- /*
- * One frame is read into device buffer. We must copy it to our memory.
- * Otherwise cdrom hangs up. Check to see if we have something to copy
- * to.
- */
- if (!current_valid()
- && sjcd_buf_in == sjcd_buf_out) {
-#if defined( SJCD_TRACE )
- printk
- ("SJCD_S_DATA: nothing to read: go to SJCD_S_STOP mode\n");
- printk
- (" ... all the date would be discarded\n");
-#endif
- sjcd_transfer_state = SJCD_S_STOP;
- goto ReSwitch;
- }
-
- /*
- * Everything seems to be OK. Just read the frame and recalculate
- * indices.
- */
- sjcd_buf_bn[sjcd_buf_in] = -1; /* ??? */
- insb(SJCDPORT(2),
- sjcd_buf + 2048 * sjcd_buf_in, 2048);
-#if defined( SJCD_TRACE )
- printk
- ("SJCD_S_DATA: next_bn=%d, buf_in=%d, buf_out=%d, buf_bn=%d\n",
- sjcd_next_bn, sjcd_buf_in,
- sjcd_buf_out,
- sjcd_buf_bn[sjcd_buf_in]);
-#endif
- sjcd_buf_bn[sjcd_buf_in] = sjcd_next_bn++;
- if (sjcd_buf_out == -1)
- sjcd_buf_out = sjcd_buf_in;
- if (++sjcd_buf_in == SJCD_BUF_SIZ)
- sjcd_buf_in = 0;
-
- /*
- * Only one frame is ready at time. So we should turn over to wait for
- * another frame. If we need that, of course.
- */
- if (--sjcd_read_count == 0) {
- /*
- * OK, request seems to be precessed. Continue transferring...
- */
- if (!sjcd_transfer_is_active) {
- while (current_valid()) {
- /*
- * Continue transferring.
- */
- sjcd_transfer();
- if (CURRENT->
- nr_sectors ==
- 0)
- end_request
- (CURRENT, 1);
- else
- break;
- }
- }
- if (current_valid() &&
- (CURRENT->sector / 4 <
- sjcd_next_bn
- || CURRENT->sector / 4 >
- sjcd_next_bn +
- SJCD_BUF_SIZ)) {
-#if defined( SJCD_TRACE )
- printk
- ("SJCD_S_DATA: can't read: go to SJCD_S_STOP mode\n");
-#endif
- sjcd_transfer_state =
- SJCD_S_STOP;
- goto ReSwitch;
- }
- }
- /*
- * Now we should turn around rather than wait for while.
- */
- goto sjcd_s_data;
- }
-#if defined( SJCD_GATHER_STAT )
- else
- statistic.data_ticks++;
-#endif
- break;
- }
-
- case SJCD_S_STOP:{
- sjcd_read_count = 0;
- sjcd_send_cmd(SCMD_STOP);
- sjcd_transfer_state = SJCD_S_STOPPING;
- sjcd_transfer_timeout = 500;
-#if defined( SJCD_GATHER_STAT )
- statistic.stop_ticks++;
-#endif
- break;
- }
-
- case SJCD_S_STOPPING:{
- unsigned char stat;
-
- stat = inb(SJCDPORT(1));
-#if defined( SJCD_TRACE )
- printk("SJCD_S_STOP: status = 0x%02x\n", stat);
-#endif
- if (SJCD_DATA_AVAILABLE(stat)) {
- int i;
-#if defined( SJCD_TRACE )
- printk("SJCD_S_STOP: discard data\n");
-#endif
- /*
- * Discard all the data from the pipe. Foolish method.
- */
- for (i = 2048; i--;
- (void) inb(SJCDPORT(2)));
- sjcd_transfer_timeout = 500;
- } else if (SJCD_STATUS_AVAILABLE(stat)) {
- sjcd_load_status();
- if (sjcd_status_valid
- && sjcd_media_is_changed) {
- sjcd_toc_uptodate = 0;
- sjcd_invalidate_buffers();
- }
- if (current_valid()) {
- if (sjcd_status_valid)
- sjcd_transfer_state =
- SJCD_S_READ;
- else
- sjcd_transfer_state =
- SJCD_S_START;
- } else
- sjcd_transfer_state = SJCD_S_IDLE;
- goto ReSwitch;
- }
-#if defined( SJCD_GATHER_STAT )
- else
- statistic.stopping_ticks++;
-#endif
- break;
- }
-
- default:
- printk("SJCD: poll: invalid state %d\n",
- sjcd_transfer_state);
- return;
- }
-
- if (--sjcd_transfer_timeout == 0) {
- printk("SJCD: timeout in state %d\n", sjcd_transfer_state);
- while (current_valid())
- end_request(CURRENT, 0);
- sjcd_send_cmd(SCMD_STOP);
- sjcd_transfer_state = SJCD_S_IDLE;
- goto ReSwitch;
- }
-
- /*
- * Get back in some time. 1 should be replaced with count variable to
- * avoid unnecessary testings.
- */
- SJCD_SET_TIMER(sjcd_poll, 1);
-}
-
-static void do_sjcd_request(request_queue_t * q)
-{
-#if defined( SJCD_TRACE )
- printk("SJCD: do_sjcd_request(%ld+%ld)\n",
- CURRENT->sector, CURRENT->nr_sectors);
-#endif
- sjcd_transfer_is_active = 1;
- while (current_valid()) {
- sjcd_transfer();
- if (CURRENT->nr_sectors == 0)
- end_request(CURRENT, 1);
- else {
- sjcd_buf_out = -1; /* Want to read a block not in buffer */
- if (sjcd_transfer_state == SJCD_S_IDLE) {
- if (!sjcd_toc_uptodate) {
- if (sjcd_update_toc() < 0) {
- printk
- ("SJCD: transfer: discard\n");
- while (current_valid())
- end_request(CURRENT, 0);
- break;
- }
- }
- sjcd_transfer_state = SJCD_S_START;
- SJCD_SET_TIMER(sjcd_poll, HZ / 100);
- }
- break;
- }
- }
- sjcd_transfer_is_active = 0;
-#if defined( SJCD_TRACE )
- printk
- ("sjcd_next_bn:%x sjcd_buf_in:%x sjcd_buf_out:%x sjcd_buf_bn:%x\n",
- sjcd_next_bn, sjcd_buf_in, sjcd_buf_out,
- sjcd_buf_bn[sjcd_buf_in]);
- printk("do_sjcd_request ends\n");
-#endif
-}
-
-/*
- * Open the device special file. Check disk is in.
- */
-static int sjcd_open(struct inode *ip, struct file *fp)
-{
- /*
- * Check the presence of device.
- */
- if (!sjcd_present)
- return (-ENXIO);
-
- /*
- * Only read operations are allowed. Really? (:-)
- */
- if (fp->f_mode & 2)
- return (-EROFS);
-
- if (sjcd_open_count == 0) {
- int s, sjcd_open_tries;
-/* We don't know that, do we? */
-/*
- sjcd_audio_status = CDROM_AUDIO_NO_STATUS;
-*/
- sjcd_mode = 0;
- sjcd_door_was_open = 0;
- sjcd_transfer_state = SJCD_S_IDLE;
- sjcd_invalidate_buffers();
- sjcd_status_valid = 0;
-
- /*
- * Strict status checking.
- */
- for (sjcd_open_tries = 4; --sjcd_open_tries;) {
- if (!sjcd_status_valid)
- sjcd_get_status();
- if (!sjcd_status_valid) {
-#if defined( SJCD_DIAGNOSTIC )
- printk
- ("SJCD: open: timed out when check status.\n");
-#endif
- goto err_out;
- } else if (!sjcd_media_is_available) {
-#if defined( SJCD_DIAGNOSTIC )
- printk("SJCD: open: no disk in drive\n");
-#endif
- if (!sjcd_door_closed) {
- sjcd_door_was_open = 1;
-#if defined( SJCD_TRACE )
- printk
- ("SJCD: open: close the tray\n");
-#endif
- s = sjcd_tray_close();
- if (s < 0 || !sjcd_status_valid
- || sjcd_command_failed) {
-#if defined( SJCD_DIAGNOSTIC )
- printk
- ("SJCD: open: tray close attempt failed\n");
-#endif
- goto err_out;
- }
- continue;
- } else
- goto err_out;
- }
- break;
- }
- s = sjcd_tray_lock();
- if (s < 0 || !sjcd_status_valid || sjcd_command_failed) {
-#if defined( SJCD_DIAGNOSTIC )
- printk("SJCD: open: tray lock attempt failed\n");
-#endif
- goto err_out;
- }
-#if defined( SJCD_TRACE )
- printk("SJCD: open: done\n");
-#endif
- }
-
- ++sjcd_open_count;
- return (0);
-
- err_out:
- return (-EIO);
-}
-
-/*
- * On close, we flush all sjcd blocks from the buffer cache.
- */
-static int sjcd_release(struct inode *inode, struct file *file)
-{
- int s;
-
-#if defined( SJCD_TRACE )
- printk("SJCD: release\n");
-#endif
- if (--sjcd_open_count == 0) {
- sjcd_invalidate_buffers();
- s = sjcd_tray_unlock();
- if (s < 0 || !sjcd_status_valid || sjcd_command_failed) {
-#if defined( SJCD_DIAGNOSTIC )
- printk
- ("SJCD: release: tray unlock attempt failed.\n");
-#endif
- }
- if (sjcd_door_was_open) {
- s = sjcd_tray_open();
- if (s < 0 || !sjcd_status_valid
- || sjcd_command_failed) {
-#if defined( SJCD_DIAGNOSTIC )
- printk
- ("SJCD: release: tray unload attempt failed.\n");
-#endif
- }
- }
- }
- return 0;
-}
-
-/*
- * A list of file operations allowed for this cdrom.
- */
-static struct block_device_operations sjcd_fops = {
- .owner = THIS_MODULE,
- .open = sjcd_open,
- .release = sjcd_release,
- .ioctl = sjcd_ioctl,
- .media_changed = sjcd_disk_change,
-};
-
-/*
- * Following stuff is intended for initialization of the cdrom. It
- * first looks for presence of device. If the device is present, it
- * will be reset. Then read the version of the drive and load status.
- * The version is two BCD-coded bytes.
- */
-static struct {
- unsigned char major, minor;
-} sjcd_version;
-
-static struct gendisk *sjcd_disk;
-
-/*
- * Test for presence of drive and initialize it. Called at boot time.
- * Probe cdrom, find out version and status.
- */
-static int __init sjcd_init(void)
-{
- int i;
-
- printk(KERN_INFO
- "SJCD: Sanyo CDR-H94A cdrom driver version %d.%d.\n",
- SJCD_VERSION_MAJOR, SJCD_VERSION_MINOR);
-
-#if defined( SJCD_TRACE )
- printk("SJCD: sjcd=0x%x: ", sjcd_base);
-#endif
-
- if (register_blkdev(MAJOR_NR, "sjcd"))
- return -EIO;
-
- sjcd_queue = blk_init_queue(do_sjcd_request, &sjcd_lock);
- if (!sjcd_queue)
- goto out0;
-
- blk_queue_hardsect_size(sjcd_queue, 2048);
-
- sjcd_disk = alloc_disk(1);
- if (!sjcd_disk) {
- printk(KERN_ERR "SJCD: can't allocate disk");
- goto out1;
- }
- sjcd_disk->major = MAJOR_NR,
- sjcd_disk->first_minor = 0,
- sjcd_disk->fops = &sjcd_fops,
- sprintf(sjcd_disk->disk_name, "sjcd");
-
- if (!request_region(sjcd_base, 4,"sjcd")) {
- printk
- ("SJCD: Init failed, I/O port (%X) is already in use\n",
- sjcd_base);
- goto out2;
- }
-
- /*
- * Check for card. Since we are booting now, we can't use standard
- * wait algorithm.
- */
- printk(KERN_INFO "SJCD: Resetting: ");
- sjcd_send_cmd(SCMD_RESET);
- for (i = 1000; i > 0 && !sjcd_status_valid; --i) {
- unsigned long timer;
-
- /*
- * Wait 10ms approx.
- */
- for (timer = jiffies; time_before_eq(jiffies, timer););
- if ((i % 100) == 0)
- printk(".");
- (void) sjcd_check_status();
- }
- if (i == 0 || sjcd_command_failed) {
- printk(" reset failed, no drive found.\n");
- goto out3;
- } else
- printk("\n");
-
- /*
- * Get and print out cdrom version.
- */
- printk(KERN_INFO "SJCD: Getting version: ");
- sjcd_send_cmd(SCMD_GET_VERSION);
- for (i = 1000; i > 0 && !sjcd_status_valid; --i) {
- unsigned long timer;
-
- /*
- * Wait 10ms approx.
- */
- for (timer = jiffies; time_before_eq(jiffies, timer););
- if ((i % 100) == 0)
- printk(".");
- (void) sjcd_check_status();
- }
- if (i == 0 || sjcd_command_failed) {
- printk(" get version failed, no drive found.\n");
- goto out3;
- }
-
- if (sjcd_load_response(&sjcd_version, sizeof(sjcd_version)) == 0) {
- printk(" %1x.%02x\n", (int) sjcd_version.major,
- (int) sjcd_version.minor);
- } else {
- printk(" read version failed, no drive found.\n");
- goto out3;
- }
-
- /*
- * Check and print out the tray state. (if it is needed?).
- */
- if (!sjcd_status_valid) {
- printk(KERN_INFO "SJCD: Getting status: ");
- sjcd_send_cmd(SCMD_GET_STATUS);
- for (i = 1000; i > 0 && !sjcd_status_valid; --i) {
- unsigned long timer;
-
- /*
- * Wait 10ms approx.
- */
- for (timer = jiffies;
- time_before_eq(jiffies, timer););
- if ((i % 100) == 0)
- printk(".");
- (void) sjcd_check_status();
- }
- if (i == 0 || sjcd_command_failed) {
- printk(" get status failed, no drive found.\n");
- goto out3;
- } else
- printk("\n");
- }
-
- printk(KERN_INFO "SJCD: Status: port=0x%x.\n", sjcd_base);
- sjcd_disk->queue = sjcd_queue;
- add_disk(sjcd_disk);
-
- sjcd_present++;
- return (0);
-out3:
- release_region(sjcd_base, 4);
-out2:
- put_disk(sjcd_disk);
-out1:
- blk_cleanup_queue(sjcd_queue);
-out0:
- if ((unregister_blkdev(MAJOR_NR, "sjcd") == -EINVAL))
- printk("SJCD: cannot unregister device.\n");
- return (-EIO);
-}
-
-static void __exit sjcd_exit(void)
-{
- del_gendisk(sjcd_disk);
- put_disk(sjcd_disk);
- release_region(sjcd_base, 4);
- blk_cleanup_queue(sjcd_queue);
- if ((unregister_blkdev(MAJOR_NR, "sjcd") == -EINVAL))
- printk("SJCD: cannot unregister device.\n");
- printk(KERN_INFO "SJCD: module: removed.\n");
-}
-
-module_init(sjcd_init);
-module_exit(sjcd_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(SANYO_CDROM_MAJOR);
diff --git a/drivers/cdrom/sjcd.h b/drivers/cdrom/sjcd.h
deleted file mode 100644
index 0aa5e714659d..000000000000
--- a/drivers/cdrom/sjcd.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Definitions for a Sanyo CD-ROM interface.
- *
- * Copyright (C) 1995 Vadim V. Model
- * model@cecmow.enet.dec.com
- * vadim@rbrf.msk.su
- * vadim@ipsun.ras.ru
- * Eric van der Maarel
- * H.T.M.v.d.Maarel@marin.nl
- *
- * This information is based on mcd.c from M. Harriss and sjcd102.lst from
- * E. Moenkeberg.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __SJCD_H__
-#define __SJCD_H__
-
-/*
- * Change this to set the I/O port address as default. More flexibility
- * come with setup implementation.
- */
-#define SJCD_BASE_ADDR 0x340
-
-/*
- * Change this to set the irq as default. Really SANYO do not use interrupts
- * at all.
- */
-#define SJCD_INTR_NR 0
-
-/*
- * Change this to set the dma as default value. really SANYO does not use
- * direct memory access at all.
- */
-#define SJCD_DMA_NR 0
-
-/*
- * Macros which allow us to find out the status of the drive.
- */
-#define SJCD_STATUS_AVAILABLE( x ) (((x)&0x02)==0)
-#define SJCD_DATA_AVAILABLE( x ) (((x)&0x01)==0)
-
-/*
- * Port access macro. Three ports are available: S-data port (command port),
- * status port (read only) and D-data port (read only).
- */
-#define SJCDPORT( x ) ( sjcd_base + ( x ) )
-#define SJCD_STATUS_PORT SJCDPORT( 1 )
-#define SJCD_S_DATA_PORT SJCDPORT( 0 )
-#define SJCD_COMMAND_PORT SJCDPORT( 0 )
-#define SJCD_D_DATA_PORT SJCDPORT( 2 )
-
-/*
- * Drive info bits. Drive info available as first (mandatory) byte of
- * command completion status.
- */
-#define SST_NOT_READY 0x10 /* no disk in the drive (???) */
-#define SST_MEDIA_CHANGED 0x20 /* disk is changed */
-#define SST_DOOR_OPENED 0x40 /* door is open */
-
-/* commands */
-
-#define SCMD_EJECT_TRAY 0xD0 /* eject tray if not locked */
-#define SCMD_LOCK_TRAY 0xD2 /* lock tray when in */
-#define SCMD_UNLOCK_TRAY 0xD4 /* unlock tray when in */
-#define SCMD_CLOSE_TRAY 0xD6 /* load tray in */
-
-#define SCMD_RESET 0xFA /* soft reset */
-#define SCMD_GET_STATUS 0x80
-#define SCMD_GET_VERSION 0xCC
-
-#define SCMD_DATA_READ 0xA0 /* are the same, depend on mode&args */
-#define SCMD_SEEK 0xA0
-#define SCMD_PLAY 0xA0
-
-#define SCMD_GET_QINFO 0xA8
-
-#define SCMD_SET_MODE 0xC4
-#define SCMD_MODE_PLAY 0xE0
-#define SCMD_MODE_COOKED (0xF8 & ~0x20)
-#define SCMD_MODE_RAW 0xF9
-#define SCMD_MODE_x20_BIT 0x20 /* What is it for ? */
-
-#define SCMD_SET_VOLUME 0xAE
-#define SCMD_PAUSE 0xE0
-#define SCMD_STOP 0xE0
-
-#define SCMD_GET_DISK_INFO 0xAA
-
-/*
- * Some standard arguments for SCMD_GET_DISK_INFO.
- */
-#define SCMD_GET_1_TRACK 0xA0 /* get the first track information */
-#define SCMD_GET_L_TRACK 0xA1 /* get the last track information */
-#define SCMD_GET_D_SIZE 0xA2 /* get the whole disk information */
-
-/*
- * Borrowed from hd.c. Allows to optimize multiple port read commands.
- */
-#define S_READ_DATA( port, buf, nr ) insb( port, buf, nr )
-
-/*
- * We assume that there are no audio disks with TOC length more than this
- * number (I personally have never seen disks with more than 20 fragments).
- */
-#define SJCD_MAX_TRACKS 100
-
-struct msf {
- unsigned char min;
- unsigned char sec;
- unsigned char frame;
-};
-
-struct sjcd_hw_disk_info {
- unsigned char track_control;
- unsigned char track_no;
- unsigned char x, y, z;
- union {
- unsigned char track_no;
- struct msf track_msf;
- } un;
-};
-
-struct sjcd_hw_qinfo {
- unsigned char track_control;
- unsigned char track_no;
- unsigned char x;
- struct msf rel;
- struct msf abs;
-};
-
-struct sjcd_play_msf {
- struct msf start;
- struct msf end;
-};
-
-struct sjcd_disk_info {
- unsigned char first;
- unsigned char last;
- struct msf disk_length;
- struct msf first_track;
-};
-
-struct sjcd_toc {
- unsigned char ctrl_addr;
- unsigned char track;
- unsigned char point_index;
- struct msf track_time;
- struct msf disk_time;
-};
-
-#if defined( SJCD_GATHER_STAT )
-
-struct sjcd_stat {
- int ticks;
- int tticks[ 8 ];
- int idle_ticks;
- int start_ticks;
- int mode_ticks;
- int read_ticks;
- int data_ticks;
- int stop_ticks;
- int stopping_ticks;
-};
-
-#endif
-
-#endif
diff --git a/drivers/cdrom/sonycd535.c b/drivers/cdrom/sonycd535.c
deleted file mode 100644
index f77ada933ea0..000000000000
--- a/drivers/cdrom/sonycd535.c
+++ /dev/null
@@ -1,1689 +0,0 @@
-/*
- * Sony CDU-535 interface device driver
- *
- * This is a modified version of the CDU-31A device driver (see below).
- * Changes were made using documentation for the CDU-531 (which Sony
- * assures me is very similar to the 535) and partial disassembly of the
- * DOS driver. I used Minyard's driver and replaced the CDU-31A
- * commands with the CDU-531 commands. This was complicated by a different
- * interface protocol with the drive. The driver is still polled.
- *
- * Data transfer rate is about 110 Kb/sec, theoretical maximum is 150 Kb/sec.
- * I tried polling without the sony_sleep during the data transfers but
- * it did not speed things up any.
- *
- * 1993-05-23 (rgj) changed the major number to 21 to get rid of conflict
- * with CDU-31A driver. This is the also the number from the Linux
- * Device Driver Registry for the Sony Drive. Hope nobody else is using it.
- *
- * 1993-08-29 (rgj) remove the configuring of the interface board address
- * from the top level configuration, you have to modify it in this file.
- *
- * 1995-01-26 Made module-capable (Joel Katz <Stimpson@Panix.COM>)
- *
- * 1995-05-20
- * Modified to support CDU-510/515 series
- * (Claudio Porfiri<C.Porfiri@nisms.tei.ericsson.se>)
- * Fixed to report verify_area() failures
- * (Heiko Eissfeldt <heiko@colossus.escape.de>)
- *
- * 1995-06-01
- * More changes to support CDU-510/515 series
- * (Claudio Porfiri<C.Porfiri@nisms.tei.ericsson.se>)
- *
- * November 1999 -- Make kernel-parameter implementation work with 2.3.x
- * Removed init_module & cleanup_module in favor of
- * module_init & module_exit.
- * Torben Mathiasen <tmm@image.dk>
- *
- * September 2003 - Fix SMP support by removing cli/sti calls.
- * Using spinlocks with a wait_queue instead.
- * Felipe Damasio <felipewd@terra.com.br>
- *
- * Things to do:
- * - handle errors and status better, put everything into a single word
- * - use interrupts (code mostly there, but a big hole still missing)
- * - handle multi-session CDs?
- * - use DMA?
- *
- * Known Bugs:
- * -
- *
- * Ken Pizzini (ken@halcyon.com)
- *
- * Original by:
- * Ron Jeppesen (ronj.an@site007.saic.com)
- *
- *
- *------------------------------------------------------------------------
- * Sony CDROM interface device driver.
- *
- * Corey Minyard (minyard@wf-rch.cirr.com) (CDU-535 complaints to Ken above)
- *
- * Colossians 3:17
- *
- * The Sony interface device driver handles Sony interface CDROM
- * drives and provides a complete block-level interface as well as an
- * ioctl() interface compatible with the Sun (as specified in
- * include/linux/cdrom.h). With this interface, CDROMs can be
- * accessed and standard audio CDs can be played back normally.
- *
- * This interface is (unfortunately) a polled interface. This is
- * because most Sony interfaces are set up with DMA and interrupts
- * disables. Some (like mine) do not even have the capability to
- * handle interrupts or DMA. For this reason you will see a bit of
- * the following:
- *
- * snap = jiffies;
- * while (jiffies-snap < SONY_JIFFIES_TIMEOUT)
- * {
- * if (some_condition())
- * break;
- * sony_sleep();
- * }
- * if (some_condition not met)
- * {
- * return an_error;
- * }
- *
- * This ugly hack waits for something to happen, sleeping a little
- * between every try. (The conditional is written so that jiffies
- * wrap-around is handled properly.)
- *
- * One thing about these drives: They talk in MSF (Minute Second Frame) format.
- * There are 75 frames a second, 60 seconds a minute, and up to 75 minutes on a
- * disk. The funny thing is that these are sent to the drive in BCD, but the
- * interface wants to see them in decimal. A lot of conversion goes on.
- *
- * Copyright (C) 1993 Corey Minyard
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-
-# include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/hdreg.h>
-#include <linux/genhd.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-
-#define REALLY_SLOW_IO
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include <linux/cdrom.h>
-
-#define MAJOR_NR CDU535_CDROM_MAJOR
-#include <linux/blkdev.h>
-
-#define sony535_cd_base_io sonycd535 /* for compatible parameter passing with "insmod" */
-#include "sonycd535.h"
-
-/*
- * this is the base address of the interface card for the Sony CDU-535
- * CDROM drive. If your jumpers are set for an address other than
- * this one (the default), change the following line to the
- * proper address.
- */
-#ifndef CDU535_ADDRESS
-# define CDU535_ADDRESS 0x340
-#endif
-#ifndef CDU535_INTERRUPT
-# define CDU535_INTERRUPT 0
-#endif
-#ifndef CDU535_HANDLE
-# define CDU535_HANDLE "cdu535"
-#endif
-#ifndef CDU535_MESSAGE_NAME
-# define CDU535_MESSAGE_NAME "Sony CDU-535"
-#endif
-
-#define CDU535_BLOCK_SIZE 2048
-
-#ifndef MAX_SPINUP_RETRY
-# define MAX_SPINUP_RETRY 3 /* 1 is sufficient for most drives... */
-#endif
-#ifndef RETRY_FOR_BAD_STATUS
-# define RETRY_FOR_BAD_STATUS 100 /* in 10th of second */
-#endif
-
-#ifndef DEBUG
-# define DEBUG 1
-#endif
-
-/*
- * SONY535_BUFFER_SIZE determines the size of internal buffer used
- * by the drive. It must be at least 2K and the larger the buffer
- * the better the transfer rate. It does however take system memory.
- * On my system I get the following transfer rates using dd to read
- * 10 Mb off /dev/cdrom.
- *
- * 8K buffer 43 Kb/sec
- * 16K buffer 66 Kb/sec
- * 32K buffer 91 Kb/sec
- * 64K buffer 111 Kb/sec
- * 128K buffer 123 Kb/sec
- * 512K buffer 123 Kb/sec
- */
-#define SONY535_BUFFER_SIZE (64*1024)
-
-/*
- * if LOCK_DOORS is defined then the eject button is disabled while
- * the device is open.
- */
-#ifndef NO_LOCK_DOORS
-# define LOCK_DOORS
-#endif
-
-static int read_subcode(void);
-static void sony_get_toc(void);
-static int cdu_open(struct inode *inode, struct file *filp);
-static inline unsigned int int_to_bcd(unsigned int val);
-static unsigned int bcd_to_int(unsigned int bcd);
-static int do_sony_cmd(Byte * cmd, int nCmd, Byte status[2],
- Byte * response, int n_response, int ignoreStatusBit7);
-
-/* The base I/O address of the Sony Interface. This is a variable (not a
- #define) so it can be easily changed via some future ioctl() */
-static unsigned int sony535_cd_base_io = CDU535_ADDRESS;
-module_param(sony535_cd_base_io, int, 0);
-
-/*
- * The following are I/O addresses of the various registers for the drive. The
- * comment for the base address also applies here.
- */
-static unsigned short select_unit_reg;
-static unsigned short result_reg;
-static unsigned short command_reg;
-static unsigned short read_status_reg;
-static unsigned short data_reg;
-
-static DEFINE_SPINLOCK(sonycd535_lock); /* queue lock */
-static struct request_queue *sonycd535_queue;
-
-static int initialized; /* Has the drive been initialized? */
-static int sony_disc_changed = 1; /* Has the disk been changed
- since the last check? */
-static int sony_toc_read; /* Has the table of contents been
- read? */
-static unsigned int sony_buffer_size; /* Size in bytes of the read-ahead
- buffer. */
-static unsigned int sony_buffer_sectors; /* Size (in 2048 byte records) of
- the read-ahead buffer. */
-static unsigned int sony_usage; /* How many processes have the
- drive open. */
-
-static int sony_first_block = -1; /* First OS block (512 byte) in
- the read-ahead buffer */
-static int sony_last_block = -1; /* Last OS block (512 byte) in
- the read-ahead buffer */
-
-static struct s535_sony_toc *sony_toc; /* Points to the table of
- contents. */
-
-static struct s535_sony_subcode *last_sony_subcode; /* Points to the last
- subcode address read */
-static Byte **sony_buffer; /* Points to the pointers
- to the sector buffers */
-
-static int sony_inuse; /* is the drive in use? Only one
- open at a time allowed */
-
-/*
- * The audio status uses the values from read subchannel data as specified
- * in include/linux/cdrom.h.
- */
-static int sony_audio_status = CDROM_AUDIO_NO_STATUS;
-
-/*
- * The following are a hack for pausing and resuming audio play. The drive
- * does not work as I would expect it, if you stop it then start it again,
- * the drive seeks back to the beginning and starts over. This holds the
- * position during a pause so a resume can restart it. It uses the
- * audio status variable above to tell if it is paused.
- * I just kept the CDU-31A driver behavior rather than using the PAUSE
- * command on the CDU-535.
- */
-static Byte cur_pos_msf[3];
-static Byte final_pos_msf[3];
-
-/* What IRQ is the drive using? 0 if none. */
-static int sony535_irq_used = CDU535_INTERRUPT;
-
-/* The interrupt handler will wake this queue up when it gets an interrupt. */
-static DECLARE_WAIT_QUEUE_HEAD(cdu535_irq_wait);
-
-
-/*
- * This routine returns 1 if the disk has been changed since the last
- * check or 0 if it hasn't. Setting flag to 0 resets the changed flag.
- */
-static int
-cdu535_check_media_change(struct gendisk *disk)
-{
- /* if driver is not initialized, always return 0 */
- int retval = initialized ? sony_disc_changed : 0;
- sony_disc_changed = 0;
- return retval;
-}
-
-static inline void
-enable_interrupts(void)
-{
-#ifdef USE_IRQ
- /*
- * This code was taken from cdu31a.c; it will not
- * directly work for the cdu535 as written...
- */
- curr_control_reg |= ( SONY_ATTN_INT_EN_BIT
- | SONY_RES_RDY_INT_EN_BIT
- | SONY_DATA_RDY_INT_EN_BIT);
- outb(curr_control_reg, sony_cd_control_reg);
-#endif
-}
-
-static inline void
-disable_interrupts(void)
-{
-#ifdef USE_IRQ
- /*
- * This code was taken from cdu31a.c; it will not
- * directly work for the cdu535 as written...
- */
- curr_control_reg &= ~(SONY_ATTN_INT_EN_BIT
- | SONY_RES_RDY_INT_EN_BIT
- | SONY_DATA_RDY_INT_EN_BIT);
- outb(curr_control_reg, sony_cd_control_reg);
-#endif
-}
-
-static irqreturn_t
-cdu535_interrupt(int irq, void *dev_id)
-{
- disable_interrupts();
- if (waitqueue_active(&cdu535_irq_wait)) {
- wake_up(&cdu535_irq_wait);
- return IRQ_HANDLED;
- }
- printk(CDU535_MESSAGE_NAME
- ": Got an interrupt but nothing was waiting\n");
- return IRQ_NONE;
-}
-
-
-/*
- * Wait a little while.
- */
-static inline void
-sony_sleep(void)
-{
- if (sony535_irq_used <= 0) { /* poll */
- yield();
- } else { /* Interrupt driven */
- DEFINE_WAIT(wait);
-
- spin_lock_irq(&sonycd535_lock);
- enable_interrupts();
- prepare_to_wait(&cdu535_irq_wait, &wait, TASK_INTERRUPTIBLE);
- spin_unlock_irq(&sonycd535_lock);
- schedule();
- finish_wait(&cdu535_irq_wait, &wait);
- }
-}
-
-/*------------------start of SONY CDU535 very specific ---------------------*/
-
-/****************************************************************************
- * void select_unit( int unit_no )
- *
- * Select the specified unit (0-3) so that subsequent commands reference it
- ****************************************************************************/
-static void
-select_unit(int unit_no)
-{
- unsigned int select_mask = ~(1 << unit_no);
- outb(select_mask, select_unit_reg);
-}
-
-/***************************************************************************
- * int read_result_reg( Byte *data_ptr )
- *
- * Read a result byte from the Sony CDU controller, store in location pointed
- * to by data_ptr. Return zero on success, TIME_OUT if we did not receive
- * data.
- ***************************************************************************/
-static int
-read_result_reg(Byte *data_ptr)
-{
- unsigned long snap;
- int read_status;
-
- snap = jiffies;
- while (jiffies-snap < SONY_JIFFIES_TIMEOUT) {
- read_status = inb(read_status_reg);
- if ((read_status & SONY535_RESULT_NOT_READY_BIT) == 0) {
-#if DEBUG > 1
- printk(CDU535_MESSAGE_NAME
- ": read_result_reg(): readStatReg = 0x%x\n", read_status);
-#endif
- *data_ptr = inb(result_reg);
- return 0;
- } else {
- sony_sleep();
- }
- }
- printk(CDU535_MESSAGE_NAME " read_result_reg: TIME OUT!\n");
- return TIME_OUT;
-}
-
-/****************************************************************************
- * int read_exec_status( Byte status[2] )
- *
- * Read the execution status of the last command and put into status.
- * Handles reading second status word if available. Returns 0 on success,
- * TIME_OUT on failure.
- ****************************************************************************/
-static int
-read_exec_status(Byte status[2])
-{
- status[1] = 0;
- if (read_result_reg(&(status[0])) != 0)
- return TIME_OUT;
- if ((status[0] & 0x80) != 0) { /* byte two follows */
- if (read_result_reg(&(status[1])) != 0)
- return TIME_OUT;
- }
-#if DEBUG > 1
- printk(CDU535_MESSAGE_NAME ": read_exec_status: read 0x%x 0x%x\n",
- status[0], status[1]);
-#endif
- return 0;
-}
-
-/****************************************************************************
- * int check_drive_status( void )
- *
- * Check the current drive status. Using this before executing a command
- * takes care of the problem of unsolicited drive status-2 messages.
- * Add a check of the audio status if we think the disk is playing.
- ****************************************************************************/
-static int
-check_drive_status(void)
-{
- Byte status, e_status[2];
- int CDD, ATN;
- Byte cmd;
-
- select_unit(0);
- if (sony_audio_status == CDROM_AUDIO_PLAY) { /* check status */
- outb(SONY535_REQUEST_AUDIO_STATUS, command_reg);
- if (read_result_reg(&status) == 0) {
- switch (status) {
- case 0x0:
- break; /* play in progress */
- case 0x1:
- break; /* paused */
- case 0x3: /* audio play completed */
- case 0x5: /* play not requested */
- sony_audio_status = CDROM_AUDIO_COMPLETED;
- read_subcode();
- break;
- case 0x4: /* error during play */
- sony_audio_status = CDROM_AUDIO_ERROR;
- break;
- }
- }
- }
- /* now check drive status */
- outb(SONY535_REQUEST_DRIVE_STATUS_2, command_reg);
- if (read_result_reg(&status) != 0)
- return TIME_OUT;
-
-#if DEBUG > 1
- printk(CDU535_MESSAGE_NAME ": check_drive_status() got 0x%x\n", status);
-#endif
-
- if (status == 0)
- return 0;
-
- ATN = status & 0xf;
- CDD = (status >> 4) & 0xf;
-
- switch (ATN) {
- case 0x0:
- break; /* go on to CDD stuff */
- case SONY535_ATN_BUSY:
- if (initialized)
- printk(CDU535_MESSAGE_NAME " error: drive busy\n");
- return CD_BUSY;
- case SONY535_ATN_EJECT_IN_PROGRESS:
- printk(CDU535_MESSAGE_NAME " error: eject in progress\n");
- sony_audio_status = CDROM_AUDIO_INVALID;
- return CD_BUSY;
- case SONY535_ATN_RESET_OCCURRED:
- case SONY535_ATN_DISC_CHANGED:
- case SONY535_ATN_RESET_AND_DISC_CHANGED:
-#if DEBUG > 0
- printk(CDU535_MESSAGE_NAME " notice: reset occurred or disc changed\n");
-#endif
- sony_disc_changed = 1;
- sony_toc_read = 0;
- sony_audio_status = CDROM_AUDIO_NO_STATUS;
- sony_first_block = -1;
- sony_last_block = -1;
- if (initialized) {
- cmd = SONY535_SPIN_UP;
- do_sony_cmd(&cmd, 1, e_status, NULL, 0, 0);
- sony_get_toc();
- }
- return 0;
- default:
- printk(CDU535_MESSAGE_NAME " error: drive busy (ATN=0x%x)\n", ATN);
- return CD_BUSY;
- }
- switch (CDD) { /* the 531 docs are not helpful in decoding this */
- case 0x0: /* just use the values from the DOS driver */
- case 0x2:
- case 0xa:
- break; /* no error */
- case 0xc:
- printk(CDU535_MESSAGE_NAME
- ": check_drive_status(): CDD = 0xc! Not properly handled!\n");
- return CD_BUSY; /* ? */
- default:
- return CD_BUSY;
- }
- return 0;
-} /* check_drive_status() */
-
-/*****************************************************************************
- * int do_sony_cmd( Byte *cmd, int n_cmd, Byte status[2],
- * Byte *response, int n_response, int ignore_status_bit7 )
- *
- * Generic routine for executing commands. The command and its parameters
- * should be placed in the cmd[] array, number of bytes in the command is
- * stored in nCmd. The response from the command will be stored in the
- * response array. The number of bytes you expect back (excluding status)
- * should be passed in n_response. Finally, some
- * commands set bit 7 of the return status even when there is no second
- * status byte, on these commands set ignoreStatusBit7 TRUE.
- * If the command was sent and data received back, then we return 0,
- * else we return TIME_OUT. You still have to check the status yourself.
- * You should call check_drive_status() before calling this routine
- * so that you do not lose notifications of disk changes, etc.
- ****************************************************************************/
-static int
-do_sony_cmd(Byte * cmd, int n_cmd, Byte status[2],
- Byte * response, int n_response, int ignore_status_bit7)
-{
- int i;
-
- /* write out the command */
- for (i = 0; i < n_cmd; i++)
- outb(cmd[i], command_reg);
-
- /* read back the status */
- if (read_result_reg(status) != 0)
- return TIME_OUT;
- if (!ignore_status_bit7 && ((status[0] & 0x80) != 0)) {
- /* get second status byte */
- if (read_result_reg(status + 1) != 0)
- return TIME_OUT;
- } else {
- status[1] = 0;
- }
-#if DEBUG > 2
- printk(CDU535_MESSAGE_NAME ": do_sony_cmd %x: %x %x\n",
- *cmd, status[0], status[1]);
-#endif
-
- /* do not know about when I should read set of data and when not to */
- if ((status[0] & ((ignore_status_bit7 ? 0x7f : 0xff) & 0x8f)) != 0)
- return 0;
-
- /* else, read in rest of data */
- for (i = 0; 0 < n_response; n_response--, i++)
- if (read_result_reg(response + i) != 0)
- return TIME_OUT;
- return 0;
-} /* do_sony_cmd() */
-
-/**************************************************************************
- * int set_drive_mode( int mode, Byte status[2] )
- *
- * Set the drive mode to the specified value (mode=0 is audio, mode=e0
- * is mode-1 CDROM
- **************************************************************************/
-static int
-set_drive_mode(int mode, Byte status[2])
-{
- Byte cmd_buff[2];
- Byte ret_buff[1];
-
- cmd_buff[0] = SONY535_SET_DRIVE_MODE;
- cmd_buff[1] = mode;
- return do_sony_cmd(cmd_buff, 2, status, ret_buff, 1, 1);
-}
-
-/***************************************************************************
- * int seek_and_read_N_blocks( Byte params[], int n_blocks, Byte status[2],
- * Byte *data_buff, int buff_size )
- *
- * Read n_blocks of data from the CDROM starting at position params[0:2],
- * number of blocks in stored in params[3:5] -- both these are already
- * int bcd format.
- * Transfer the data into the buffer pointed at by data_buff. buff_size
- * gives the number of bytes available in the buffer.
- * The routine returns number of bytes read in if successful, otherwise
- * it returns one of the standard error returns.
- ***************************************************************************/
-static int
-seek_and_read_N_blocks(Byte params[], int n_blocks, Byte status[2],
- Byte **buff, int buf_size)
-{
- Byte cmd_buff[7];
- int i;
- int read_status;
- unsigned long snap;
- Byte *data_buff;
- int sector_count = 0;
-
- if (buf_size < CDU535_BLOCK_SIZE * n_blocks)
- return NO_ROOM;
-
- set_drive_mode(SONY535_CDROM_DRIVE_MODE, status);
-
- /* send command to read the data */
- cmd_buff[0] = SONY535_SEEK_AND_READ_N_BLOCKS_1;
- for (i = 0; i < 6; i++)
- cmd_buff[i + 1] = params[i];
- for (i = 0; i < 7; i++)
- outb(cmd_buff[i], command_reg);
-
- /* read back the data one block at a time */
- while (0 < n_blocks--) {
- /* wait for data to be ready */
- int data_valid = 0;
- snap = jiffies;
- while (jiffies-snap < SONY_JIFFIES_TIMEOUT) {
- read_status = inb(read_status_reg);
- if ((read_status & SONY535_RESULT_NOT_READY_BIT) == 0) {
- read_exec_status(status);
- return BAD_STATUS;
- }
- if ((read_status & SONY535_DATA_NOT_READY_BIT) == 0) {
- /* data is ready, read it */
- data_buff = buff[sector_count++];
- for (i = 0; i < CDU535_BLOCK_SIZE; i++)
- *data_buff++ = inb(data_reg); /* unrolling this loop does not seem to help */
- data_valid = 1;
- break; /* exit the timeout loop */
- }
- sony_sleep(); /* data not ready, sleep a while */
- }
- if (!data_valid)
- return TIME_OUT; /* if we reach this stage */
- }
-
- /* read all the data, now read the status */
- if ((i = read_exec_status(status)) != 0)
- return i;
- return CDU535_BLOCK_SIZE * sector_count;
-} /* seek_and_read_N_blocks() */
-
-/****************************************************************************
- * int request_toc_data( Byte status[2], struct s535_sony_toc *toc )
- *
- * Read in the table of contents data. Converts all the bcd data
- * into integers in the toc structure.
- ****************************************************************************/
-static int
-request_toc_data(Byte status[2], struct s535_sony_toc *toc)
-{
- int to_status;
- int i, j, n_tracks, track_no;
- int first_track_num, last_track_num;
- Byte cmd_no = 0xb2;
- Byte track_address_buffer[5];
-
- /* read the fixed portion of the table of contents */
- if ((to_status = do_sony_cmd(&cmd_no, 1, status, (Byte *) toc, 15, 1)) != 0)
- return to_status;
-
- /* convert the data into integers so we can use them */
- first_track_num = bcd_to_int(toc->first_track_num);
- last_track_num = bcd_to_int(toc->last_track_num);
- n_tracks = last_track_num - first_track_num + 1;
-
- /* read each of the track address descriptors */
- for (i = 0; i < n_tracks; i++) {
- /* read the descriptor into a temporary buffer */
- for (j = 0; j < 5; j++) {
- if (read_result_reg(track_address_buffer + j) != 0)
- return TIME_OUT;
- if (j == 1) /* need to convert from bcd */
- track_no = bcd_to_int(track_address_buffer[j]);
- }
- /* copy the descriptor to proper location - sonycd.c just fills */
- memcpy(toc->tracks + i, track_address_buffer, 5);
- }
- return 0;
-} /* request_toc_data() */
-
-/***************************************************************************
- * int spin_up_drive( Byte status[2] )
- *
- * Spin up the drive (unless it is already spinning).
- ***************************************************************************/
-static int
-spin_up_drive(Byte status[2])
-{
- Byte cmd;
-
- /* first see if the drive is already spinning */
- cmd = SONY535_REQUEST_DRIVE_STATUS_1;
- if (do_sony_cmd(&cmd, 1, status, NULL, 0, 0) != 0)
- return TIME_OUT;
- if ((status[0] & SONY535_STATUS1_NOT_SPINNING) == 0)
- return 0; /* it's already spinning */
-
- /* otherwise, give the spin-up command */
- cmd = SONY535_SPIN_UP;
- return do_sony_cmd(&cmd, 1, status, NULL, 0, 0);
-}
-
-/*--------------------end of SONY CDU535 very specific ---------------------*/
-
-/* Convert from an integer 0-99 to BCD */
-static inline unsigned int
-int_to_bcd(unsigned int val)
-{
- int retval;
-
- retval = (val / 10) << 4;
- retval = retval | val % 10;
- return retval;
-}
-
-
-/* Convert from BCD to an integer from 0-99 */
-static unsigned int
-bcd_to_int(unsigned int bcd)
-{
- return (((bcd >> 4) & 0x0f) * 10) + (bcd & 0x0f);
-}
-
-
-/*
- * Convert a logical sector value (like the OS would want to use for
- * a block device) to an MSF format.
- */
-static void
-log_to_msf(unsigned int log, Byte *msf)
-{
- log = log + LOG_START_OFFSET;
- msf[0] = int_to_bcd(log / 4500);
- log = log % 4500;
- msf[1] = int_to_bcd(log / 75);
- msf[2] = int_to_bcd(log % 75);
-}
-
-
-/*
- * Convert an MSF format to a logical sector.
- */
-static unsigned int
-msf_to_log(Byte *msf)
-{
- unsigned int log;
-
-
- log = bcd_to_int(msf[2]);
- log += bcd_to_int(msf[1]) * 75;
- log += bcd_to_int(msf[0]) * 4500;
- log = log - LOG_START_OFFSET;
-
- return log;
-}
-
-
-/*
- * Take in integer size value and put it into a buffer like
- * the drive would want to see a number-of-sector value.
- */
-static void
-size_to_buf(unsigned int size, Byte *buf)
-{
- buf[0] = size / 65536;
- size = size % 65536;
- buf[1] = size / 256;
- buf[2] = size % 256;
-}
-
-
-/*
- * The OS calls this to perform a read or write operation to the drive.
- * Write obviously fail. Reads to a read ahead of sony_buffer_size
- * bytes to help speed operations. This especially helps since the OS
- * may use 1024 byte blocks and the drive uses 2048 byte blocks. Since most
- * data access on a CD is done sequentially, this saves a lot of operations.
- */
-static void
-do_cdu535_request(request_queue_t * q)
-{
- struct request *req;
- unsigned int read_size;
- int block;
- int nsect;
- int copyoff;
- int spin_up_retry;
- Byte params[10];
- Byte status[2];
- Byte cmd[2];
-
- while (1) {
- req = elv_next_request(q);
- if (!req)
- return;
-
- block = req->sector;
- nsect = req->nr_sectors;
- if (!blk_fs_request(req)) {
- end_request(req, 0);
- continue;
- }
- if (rq_data_dir(req) == WRITE) {
- end_request(req, 0);
- continue;
- }
- /*
- * If the block address is invalid or the request goes beyond
- * the end of the media, return an error.
- */
- if (sony_toc->lead_out_start_lba <= (block/4)) {
- end_request(req, 0);
- return;
- }
- if (sony_toc->lead_out_start_lba <= ((block + nsect) / 4)) {
- end_request(req, 0);
- return;
- }
- while (0 < nsect) {
- /*
- * If the requested sector is not currently in
- * the read-ahead buffer, it must be read in.
- */
- if ((block < sony_first_block) || (sony_last_block < block)) {
- sony_first_block = (block / 4) * 4;
- log_to_msf(block / 4, params);
-
- /*
- * If the full read-ahead would go beyond the end of the media, trim
- * it back to read just till the end of the media.
- */
- if (sony_toc->lead_out_start_lba <= ((block / 4) + sony_buffer_sectors)) {
- sony_last_block = (sony_toc->lead_out_start_lba * 4) - 1;
- read_size = sony_toc->lead_out_start_lba - (block / 4);
- } else {
- sony_last_block = sony_first_block + (sony_buffer_sectors * 4) - 1;
- read_size = sony_buffer_sectors;
- }
- size_to_buf(read_size, &params[3]);
-
- /*
- * Read the data. If the drive was not spinning,
- * spin it up and try some more.
- */
- for (spin_up_retry=0 ;; ++spin_up_retry) {
- /* This loop has been modified to support the Sony
- * CDU-510/515 series, thanks to Claudio Porfiri
- * <C.Porfiri@nisms.tei.ericsson.se>.
- */
- /*
- * This part is to deal with very slow hardware. We
- * try at most MAX_SPINUP_RETRY times to read the same
- * block. A check for seek_and_read_N_blocks' result is
- * performed; if the result is wrong, the CDROM's engine
- * is restarted and the operation is tried again.
- */
- /*
- * 1995-06-01: The system got problems when downloading
- * from Slackware CDROM, the problem seems to be:
- * seek_and_read_N_blocks returns BAD_STATUS and we
- * should wait for a while before retrying, so a new
- * part was added to discriminate the return value from
- * seek_and_read_N_blocks for the various cases.
- */
- int readStatus = seek_and_read_N_blocks(params, read_size,
- status, sony_buffer, (read_size * CDU535_BLOCK_SIZE));
- if (0 <= readStatus) /* Good data; common case, placed first */
- break;
- if (readStatus == NO_ROOM || spin_up_retry == MAX_SPINUP_RETRY) {
- /* give up */
- if (readStatus == NO_ROOM)
- printk(CDU535_MESSAGE_NAME " No room to read from CD\n");
- else
- printk(CDU535_MESSAGE_NAME " Read error: 0x%.2x\n",
- status[0]);
- sony_first_block = -1;
- sony_last_block = -1;
- end_request(req, 0);
- return;
- }
- if (readStatus == BAD_STATUS) {
- /* Sleep for a while, then retry */
- set_current_state(TASK_INTERRUPTIBLE);
- spin_unlock_irq(&sonycd535_lock);
- schedule_timeout(RETRY_FOR_BAD_STATUS*HZ/10);
- spin_lock_irq(&sonycd535_lock);
- }
-#if DEBUG > 0
- printk(CDU535_MESSAGE_NAME
- " debug: calling spin up when reading data!\n");
-#endif
- cmd[0] = SONY535_SPIN_UP;
- do_sony_cmd(cmd, 1, status, NULL, 0, 0);
- }
- }
- /*
- * The data is in memory now, copy it to the buffer and advance to the
- * next block to read.
- */
- copyoff = block - sony_first_block;
- memcpy(req->buffer,
- sony_buffer[copyoff / 4] + 512 * (copyoff % 4), 512);
-
- block += 1;
- nsect -= 1;
- req->buffer += 512;
- }
-
- end_request(req, 1);
- }
-}
-
-/*
- * Read the table of contents from the drive and set sony_toc_read if
- * successful.
- */
-static void
-sony_get_toc(void)
-{
- Byte status[2];
- if (!sony_toc_read) {
- /* do not call check_drive_status() from here since it can call this routine */
- if (request_toc_data(status, sony_toc) < 0)
- return;
- sony_toc->lead_out_start_lba = msf_to_log(sony_toc->lead_out_start_msf);
- sony_toc_read = 1;
- }
-}
-
-
-/*
- * Search for a specific track in the table of contents. track is
- * passed in bcd format
- */
-static int
-find_track(int track)
-{
- int i;
- int num_tracks;
-
-
- num_tracks = bcd_to_int(sony_toc->last_track_num) -
- bcd_to_int(sony_toc->first_track_num) + 1;
- for (i = 0; i < num_tracks; i++) {
- if (sony_toc->tracks[i].track == track) {
- return i;
- }
- }
-
- return -1;
-}
-
-/*
- * Read the subcode and put it int last_sony_subcode for future use.
- */
-static int
-read_subcode(void)
-{
- Byte cmd = SONY535_REQUEST_SUB_Q_DATA;
- Byte status[2];
- int dsc_status;
-
- if (check_drive_status() != 0)
- return -EIO;
-
- if ((dsc_status = do_sony_cmd(&cmd, 1, status, (Byte *) last_sony_subcode,
- sizeof(struct s535_sony_subcode), 1)) != 0) {
- printk(CDU535_MESSAGE_NAME " error 0x%.2x, %d (read_subcode)\n",
- status[0], dsc_status);
- return -EIO;
- }
- return 0;
-}
-
-
-/*
- * Get the subchannel info like the CDROMSUBCHNL command wants to see it. If
- * the drive is playing, the subchannel needs to be read (since it would be
- * changing). If the drive is paused or completed, the subcode information has
- * already been stored, just use that. The ioctl call wants things in decimal
- * (not BCD), so all the conversions are done.
- */
-static int
-sony_get_subchnl_info(void __user *arg)
-{
- struct cdrom_subchnl schi;
-
- /* Get attention stuff */
- if (check_drive_status() != 0)
- return -EIO;
-
- sony_get_toc();
- if (!sony_toc_read) {
- return -EIO;
- }
- if (copy_from_user(&schi, arg, sizeof schi))
- return -EFAULT;
-
- switch (sony_audio_status) {
- case CDROM_AUDIO_PLAY:
- if (read_subcode() < 0) {
- return -EIO;
- }
- break;
-
- case CDROM_AUDIO_PAUSED:
- case CDROM_AUDIO_COMPLETED:
- break;
-
- case CDROM_AUDIO_NO_STATUS:
- schi.cdsc_audiostatus = sony_audio_status;
- if (copy_to_user(arg, &schi, sizeof schi))
- return -EFAULT;
- return 0;
- break;
-
- case CDROM_AUDIO_INVALID:
- case CDROM_AUDIO_ERROR:
- default:
- return -EIO;
- }
-
- schi.cdsc_audiostatus = sony_audio_status;
- schi.cdsc_adr = last_sony_subcode->address;
- schi.cdsc_ctrl = last_sony_subcode->control;
- schi.cdsc_trk = bcd_to_int(last_sony_subcode->track_num);
- schi.cdsc_ind = bcd_to_int(last_sony_subcode->index_num);
- if (schi.cdsc_format == CDROM_MSF) {
- schi.cdsc_absaddr.msf.minute = bcd_to_int(last_sony_subcode->abs_msf[0]);
- schi.cdsc_absaddr.msf.second = bcd_to_int(last_sony_subcode->abs_msf[1]);
- schi.cdsc_absaddr.msf.frame = bcd_to_int(last_sony_subcode->abs_msf[2]);
-
- schi.cdsc_reladdr.msf.minute = bcd_to_int(last_sony_subcode->rel_msf[0]);
- schi.cdsc_reladdr.msf.second = bcd_to_int(last_sony_subcode->rel_msf[1]);
- schi.cdsc_reladdr.msf.frame = bcd_to_int(last_sony_subcode->rel_msf[2]);
- } else if (schi.cdsc_format == CDROM_LBA) {
- schi.cdsc_absaddr.lba = msf_to_log(last_sony_subcode->abs_msf);
- schi.cdsc_reladdr.lba = msf_to_log(last_sony_subcode->rel_msf);
- }
- return copy_to_user(arg, &schi, sizeof schi) ? -EFAULT : 0;
-}
-
-
-/*
- * The big ugly ioctl handler.
- */
-static int
-cdu_ioctl(struct inode *inode,
- struct file *file,
- unsigned int cmd,
- unsigned long arg)
-{
- Byte status[2];
- Byte cmd_buff[10], params[10];
- int i;
- int dsc_status;
- void __user *argp = (void __user *)arg;
-
- if (check_drive_status() != 0)
- return -EIO;
-
- switch (cmd) {
- case CDROMSTART: /* Spin up the drive */
- if (spin_up_drive(status) < 0) {
- printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMSTART)\n",
- status[0]);
- return -EIO;
- }
- return 0;
- break;
-
- case CDROMSTOP: /* Spin down the drive */
- cmd_buff[0] = SONY535_HOLD;
- do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-
- /*
- * Spin the drive down, ignoring the error if the disk was
- * already not spinning.
- */
- sony_audio_status = CDROM_AUDIO_NO_STATUS;
- cmd_buff[0] = SONY535_SPIN_DOWN;
- dsc_status = do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
- if (((dsc_status < 0) && (dsc_status != BAD_STATUS)) ||
- ((status[0] & ~(SONY535_STATUS1_NOT_SPINNING)) != 0)) {
- printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMSTOP)\n",
- status[0]);
- return -EIO;
- }
- return 0;
- break;
-
- case CDROMPAUSE: /* Pause the drive */
- cmd_buff[0] = SONY535_HOLD; /* CDU-31 driver uses AUDIO_STOP, not pause */
- if (do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0) != 0) {
- printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPAUSE)\n",
- status[0]);
- return -EIO;
- }
- /* Get the current position and save it for resuming */
- if (read_subcode() < 0) {
- return -EIO;
- }
- cur_pos_msf[0] = last_sony_subcode->abs_msf[0];
- cur_pos_msf[1] = last_sony_subcode->abs_msf[1];
- cur_pos_msf[2] = last_sony_subcode->abs_msf[2];
- sony_audio_status = CDROM_AUDIO_PAUSED;
- return 0;
- break;
-
- case CDROMRESUME: /* Start the drive after being paused */
- set_drive_mode(SONY535_AUDIO_DRIVE_MODE, status);
-
- if (sony_audio_status != CDROM_AUDIO_PAUSED) {
- return -EINVAL;
- }
- spin_up_drive(status);
-
- /* Start the drive at the saved position. */
- cmd_buff[0] = SONY535_PLAY_AUDIO;
- cmd_buff[1] = 0; /* play back starting at this address */
- cmd_buff[2] = cur_pos_msf[0];
- cmd_buff[3] = cur_pos_msf[1];
- cmd_buff[4] = cur_pos_msf[2];
- cmd_buff[5] = SONY535_PLAY_AUDIO;
- cmd_buff[6] = 2; /* set ending address */
- cmd_buff[7] = final_pos_msf[0];
- cmd_buff[8] = final_pos_msf[1];
- cmd_buff[9] = final_pos_msf[2];
- if ((do_sony_cmd(cmd_buff, 5, status, NULL, 0, 0) != 0) ||
- (do_sony_cmd(cmd_buff + 5, 5, status, NULL, 0, 0) != 0)) {
- printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMRESUME)\n",
- status[0]);
- return -EIO;
- }
- sony_audio_status = CDROM_AUDIO_PLAY;
- return 0;
- break;
-
- case CDROMPLAYMSF: /* Play starting at the given MSF address. */
- if (copy_from_user(params, argp, 6))
- return -EFAULT;
- spin_up_drive(status);
- set_drive_mode(SONY535_AUDIO_DRIVE_MODE, status);
-
- /* The parameters are given in int, must be converted */
- for (i = 0; i < 3; i++) {
- cmd_buff[2 + i] = int_to_bcd(params[i]);
- cmd_buff[7 + i] = int_to_bcd(params[i + 3]);
- }
- cmd_buff[0] = SONY535_PLAY_AUDIO;
- cmd_buff[1] = 0; /* play back starting at this address */
- /* cmd_buff[2-4] are filled in for loop above */
- cmd_buff[5] = SONY535_PLAY_AUDIO;
- cmd_buff[6] = 2; /* set ending address */
- /* cmd_buff[7-9] are filled in for loop above */
- if ((do_sony_cmd(cmd_buff, 5, status, NULL, 0, 0) != 0) ||
- (do_sony_cmd(cmd_buff + 5, 5, status, NULL, 0, 0) != 0)) {
- printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPLAYMSF)\n",
- status[0]);
- return -EIO;
- }
- /* Save the final position for pauses and resumes */
- final_pos_msf[0] = cmd_buff[7];
- final_pos_msf[1] = cmd_buff[8];
- final_pos_msf[2] = cmd_buff[9];
- sony_audio_status = CDROM_AUDIO_PLAY;
- return 0;
- break;
-
- case CDROMREADTOCHDR: /* Read the table of contents header */
- {
- struct cdrom_tochdr __user *hdr = argp;
- struct cdrom_tochdr loc_hdr;
-
- sony_get_toc();
- if (!sony_toc_read)
- return -EIO;
- loc_hdr.cdth_trk0 = bcd_to_int(sony_toc->first_track_num);
- loc_hdr.cdth_trk1 = bcd_to_int(sony_toc->last_track_num);
- if (copy_to_user(hdr, &loc_hdr, sizeof *hdr))
- return -EFAULT;
- }
- return 0;
- break;
-
- case CDROMREADTOCENTRY: /* Read a given table of contents entry */
- {
- struct cdrom_tocentry __user *entry = argp;
- struct cdrom_tocentry loc_entry;
- int track_idx;
- Byte *msf_val = NULL;
-
- sony_get_toc();
- if (!sony_toc_read) {
- return -EIO;
- }
-
- if (copy_from_user(&loc_entry, entry, sizeof loc_entry))
- return -EFAULT;
-
- /* Lead out is handled separately since it is special. */
- if (loc_entry.cdte_track == CDROM_LEADOUT) {
- loc_entry.cdte_adr = 0 /*sony_toc->address2 */ ;
- loc_entry.cdte_ctrl = sony_toc->control2;
- msf_val = sony_toc->lead_out_start_msf;
- } else {
- track_idx = find_track(int_to_bcd(loc_entry.cdte_track));
- if (track_idx < 0)
- return -EINVAL;
- loc_entry.cdte_adr = 0 /*sony_toc->tracks[track_idx].address */ ;
- loc_entry.cdte_ctrl = sony_toc->tracks[track_idx].control;
- msf_val = sony_toc->tracks[track_idx].track_start_msf;
- }
-
- /* Logical buffer address or MSF format requested? */
- if (loc_entry.cdte_format == CDROM_LBA) {
- loc_entry.cdte_addr.lba = msf_to_log(msf_val);
- } else if (loc_entry.cdte_format == CDROM_MSF) {
- loc_entry.cdte_addr.msf.minute = bcd_to_int(*msf_val);
- loc_entry.cdte_addr.msf.second = bcd_to_int(*(msf_val + 1));
- loc_entry.cdte_addr.msf.frame = bcd_to_int(*(msf_val + 2));
- }
- if (copy_to_user(entry, &loc_entry, sizeof *entry))
- return -EFAULT;
- }
- return 0;
- break;
-
- case CDROMPLAYTRKIND: /* Play a track. This currently ignores index. */
- {
- struct cdrom_ti ti;
- int track_idx;
-
- sony_get_toc();
- if (!sony_toc_read)
- return -EIO;
-
- if (copy_from_user(&ti, argp, sizeof ti))
- return -EFAULT;
- if ((ti.cdti_trk0 < sony_toc->first_track_num)
- || (sony_toc->last_track_num < ti.cdti_trk0)
- || (ti.cdti_trk1 < ti.cdti_trk0)) {
- return -EINVAL;
- }
- track_idx = find_track(int_to_bcd(ti.cdti_trk0));
- if (track_idx < 0)
- return -EINVAL;
- params[1] = sony_toc->tracks[track_idx].track_start_msf[0];
- params[2] = sony_toc->tracks[track_idx].track_start_msf[1];
- params[3] = sony_toc->tracks[track_idx].track_start_msf[2];
- /*
- * If we want to stop after the last track, use the lead-out
- * MSF to do that.
- */
- if (bcd_to_int(sony_toc->last_track_num) <= ti.cdti_trk1) {
- log_to_msf(msf_to_log(sony_toc->lead_out_start_msf) - 1,
- &(params[4]));
- } else {
- track_idx = find_track(int_to_bcd(ti.cdti_trk1 + 1));
- if (track_idx < 0)
- return -EINVAL;
- log_to_msf(msf_to_log(sony_toc->tracks[track_idx].track_start_msf) - 1,
- &(params[4]));
- }
- params[0] = 0x03;
-
- spin_up_drive(status);
-
- set_drive_mode(SONY535_AUDIO_DRIVE_MODE, status);
-
- /* Start the drive at the saved position. */
- cmd_buff[0] = SONY535_PLAY_AUDIO;
- cmd_buff[1] = 0; /* play back starting at this address */
- cmd_buff[2] = params[1];
- cmd_buff[3] = params[2];
- cmd_buff[4] = params[3];
- cmd_buff[5] = SONY535_PLAY_AUDIO;
- cmd_buff[6] = 2; /* set ending address */
- cmd_buff[7] = params[4];
- cmd_buff[8] = params[5];
- cmd_buff[9] = params[6];
- if ((do_sony_cmd(cmd_buff, 5, status, NULL, 0, 0) != 0) ||
- (do_sony_cmd(cmd_buff + 5, 5, status, NULL, 0, 0) != 0)) {
- printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPLAYTRKIND)\n",
- status[0]);
- printk("... Params: %x %x %x %x %x %x %x\n",
- params[0], params[1], params[2],
- params[3], params[4], params[5], params[6]);
- return -EIO;
- }
- /* Save the final position for pauses and resumes */
- final_pos_msf[0] = params[4];
- final_pos_msf[1] = params[5];
- final_pos_msf[2] = params[6];
- sony_audio_status = CDROM_AUDIO_PLAY;
- return 0;
- }
-
- case CDROMSUBCHNL: /* Get subchannel info */
- return sony_get_subchnl_info(argp);
-
- case CDROMVOLCTRL: /* Volume control. What volume does this change, anyway? */
- {
- struct cdrom_volctrl volctrl;
-
- if (copy_from_user(&volctrl, argp, sizeof volctrl))
- return -EFAULT;
- cmd_buff[0] = SONY535_SET_VOLUME;
- cmd_buff[1] = volctrl.channel0;
- cmd_buff[2] = volctrl.channel1;
- if (do_sony_cmd(cmd_buff, 3, status, NULL, 0, 0) != 0) {
- printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMVOLCTRL)\n",
- status[0]);
- return -EIO;
- }
- }
- return 0;
-
- case CDROMEJECT: /* Eject the drive */
- cmd_buff[0] = SONY535_STOP;
- do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
- cmd_buff[0] = SONY535_SPIN_DOWN;
- do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-
- sony_audio_status = CDROM_AUDIO_INVALID;
- cmd_buff[0] = SONY535_EJECT_CADDY;
- if (do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0) != 0) {
- printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMEJECT)\n",
- status[0]);
- return -EIO;
- }
- return 0;
- break;
-
- default:
- return -EINVAL;
- }
-}
-
-
-/*
- * Open the drive for operations. Spin the drive up and read the table of
- * contents if these have not already been done.
- */
-static int
-cdu_open(struct inode *inode,
- struct file *filp)
-{
- Byte status[2], cmd_buff[2];
-
- if (sony_inuse)
- return -EBUSY;
- if (check_drive_status() != 0)
- return -EIO;
- sony_inuse = 1;
-
- if (spin_up_drive(status) != 0) {
- printk(CDU535_MESSAGE_NAME " error 0x%.2x (cdu_open, spin up)\n",
- status[0]);
- sony_inuse = 0;
- return -EIO;
- }
- sony_get_toc();
- if (!sony_toc_read) {
- cmd_buff[0] = SONY535_SPIN_DOWN;
- do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
- sony_inuse = 0;
- return -EIO;
- }
- check_disk_change(inode->i_bdev);
- sony_usage++;
-
-#ifdef LOCK_DOORS
- /* disable the eject button while mounted */
- cmd_buff[0] = SONY535_DISABLE_EJECT_BUTTON;
- do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-#endif
-
- return 0;
-}
-
-
-/*
- * Close the drive. Spin it down if no task is using it. The spin
- * down will fail if playing audio, so audio play is OK.
- */
-static int
-cdu_release(struct inode *inode,
- struct file *filp)
-{
- Byte status[2], cmd_no;
-
- sony_inuse = 0;
-
- if (0 < sony_usage) {
- sony_usage--;
- }
- if (sony_usage == 0) {
- check_drive_status();
-
- if (sony_audio_status != CDROM_AUDIO_PLAY) {
- cmd_no = SONY535_SPIN_DOWN;
- do_sony_cmd(&cmd_no, 1, status, NULL, 0, 0);
- }
-#ifdef LOCK_DOORS
- /* enable the eject button after umount */
- cmd_no = SONY535_ENABLE_EJECT_BUTTON;
- do_sony_cmd(&cmd_no, 1, status, NULL, 0, 0);
-#endif
- }
- return 0;
-}
-
-static struct block_device_operations cdu_fops =
-{
- .owner = THIS_MODULE,
- .open = cdu_open,
- .release = cdu_release,
- .ioctl = cdu_ioctl,
- .media_changed = cdu535_check_media_change,
-};
-
-static struct gendisk *cdu_disk;
-
-/*
- * Initialize the driver.
- */
-static int __init sony535_init(void)
-{
- struct s535_sony_drive_config drive_config;
- Byte cmd_buff[3];
- Byte ret_buff[2];
- Byte status[2];
- unsigned long snap;
- int got_result = 0;
- int tmp_irq;
- int i;
- int err;
-
- /* Setting the base I/O address to 0 will disable it. */
- if ((sony535_cd_base_io == 0xffff)||(sony535_cd_base_io == 0))
- return 0;
-
- /* Set up all the register locations */
- result_reg = sony535_cd_base_io;
- command_reg = sony535_cd_base_io;
- data_reg = sony535_cd_base_io + 1;
- read_status_reg = sony535_cd_base_io + 2;
- select_unit_reg = sony535_cd_base_io + 3;
-
-#ifndef USE_IRQ
- sony535_irq_used = 0; /* polling only until this is ready... */
-#endif
- /* we need to poll until things get initialized */
- tmp_irq = sony535_irq_used;
- sony535_irq_used = 0;
-
-#if DEBUG > 0
- printk(KERN_INFO CDU535_MESSAGE_NAME ": probing base address %03X\n",
- sony535_cd_base_io);
-#endif
- /* look for the CD-ROM, follows the procedure in the DOS driver */
- inb(select_unit_reg);
- /* wait for 40 18 Hz ticks (reverse-engineered from DOS driver) */
- schedule_timeout_interruptible((HZ+17)*40/18);
- inb(result_reg);
-
- outb(0, read_status_reg); /* does a reset? */
- snap = jiffies;
- while (jiffies-snap < SONY_JIFFIES_TIMEOUT) {
- select_unit(0);
- if (inb(result_reg) != 0xff) {
- got_result = 1;
- break;
- }
- sony_sleep();
- }
-
- if (!got_result || check_drive_status() == TIME_OUT)
- goto Enodev;
-
- /* CD-ROM drive responded -- get the drive configuration */
- cmd_buff[0] = SONY535_INQUIRY;
- if (do_sony_cmd(cmd_buff, 1, status, (Byte *)&drive_config, 28, 1) != 0)
- goto Enodev;
-
- /* was able to get the configuration,
- * set drive mode as rest of init
- */
-#if DEBUG > 0
- /* 0x50 == CADDY_NOT_INSERTED | NOT_SPINNING */
- if ( (status[0] & 0x7f) != 0 && (status[0] & 0x7f) != 0x50 )
- printk(CDU535_MESSAGE_NAME
- "Inquiry command returned status = 0x%x\n", status[0]);
-#endif
- /* now ready to use interrupts, if available */
- sony535_irq_used = tmp_irq;
-
- /* A negative sony535_irq_used will attempt an autoirq. */
- if (sony535_irq_used < 0) {
- unsigned long irq_mask, delay;
-
- irq_mask = probe_irq_on();
- enable_interrupts();
- outb(0, read_status_reg); /* does a reset? */
- delay = jiffies + HZ/10;
- while (time_before(jiffies, delay)) ;
-
- sony535_irq_used = probe_irq_off(irq_mask);
- disable_interrupts();
- }
- if (sony535_irq_used > 0) {
- if (request_irq(sony535_irq_used, cdu535_interrupt,
- IRQF_DISABLED, CDU535_HANDLE, NULL)) {
- printk("Unable to grab IRQ%d for the " CDU535_MESSAGE_NAME
- " driver; polling instead.\n", sony535_irq_used);
- sony535_irq_used = 0;
- }
- }
- cmd_buff[0] = SONY535_SET_DRIVE_MODE;
- cmd_buff[1] = 0x0; /* default audio */
- if (do_sony_cmd(cmd_buff, 2, status, ret_buff, 1, 1) != 0)
- goto Enodev_irq;
-
- /* set the drive mode successful, we are set! */
- sony_buffer_size = SONY535_BUFFER_SIZE;
- sony_buffer_sectors = sony_buffer_size / CDU535_BLOCK_SIZE;
-
- printk(KERN_INFO CDU535_MESSAGE_NAME " I/F CDROM : %8.8s %16.16s %4.4s",
- drive_config.vendor_id,
- drive_config.product_id,
- drive_config.product_rev_level);
- printk(" base address %03X, ", sony535_cd_base_io);
- if (tmp_irq > 0)
- printk("IRQ%d, ", tmp_irq);
- printk("using %d byte buffer\n", sony_buffer_size);
-
- if (register_blkdev(MAJOR_NR, CDU535_HANDLE)) {
- err = -EIO;
- goto out1;
- }
- sonycd535_queue = blk_init_queue(do_cdu535_request, &sonycd535_lock);
- if (!sonycd535_queue) {
- err = -ENOMEM;
- goto out1a;
- }
-
- blk_queue_hardsect_size(sonycd535_queue, CDU535_BLOCK_SIZE);
- sony_toc = kmalloc(sizeof(struct s535_sony_toc), GFP_KERNEL);
- err = -ENOMEM;
- if (!sony_toc)
- goto out2;
- last_sony_subcode = kmalloc(sizeof(struct s535_sony_subcode), GFP_KERNEL);
- if (!last_sony_subcode)
- goto out3;
- sony_buffer = kmalloc(sizeof(Byte *) * sony_buffer_sectors, GFP_KERNEL);
- if (!sony_buffer)
- goto out4;
- for (i = 0; i < sony_buffer_sectors; i++) {
- sony_buffer[i] = kmalloc(CDU535_BLOCK_SIZE, GFP_KERNEL);
- if (!sony_buffer[i]) {
- while (--i>=0)
- kfree(sony_buffer[i]);
- goto out5;
- }
- }
- initialized = 1;
-
- cdu_disk = alloc_disk(1);
- if (!cdu_disk)
- goto out6;
- cdu_disk->major = MAJOR_NR;
- cdu_disk->first_minor = 0;
- cdu_disk->fops = &cdu_fops;
- sprintf(cdu_disk->disk_name, "cdu");
-
- if (!request_region(sony535_cd_base_io, 4, CDU535_HANDLE)) {
- printk(KERN_WARNING"sonycd535: Unable to request region 0x%x\n",
- sony535_cd_base_io);
- goto out7;
- }
- cdu_disk->queue = sonycd535_queue;
- add_disk(cdu_disk);
- return 0;
-
-out7:
- put_disk(cdu_disk);
-out6:
- for (i = 0; i < sony_buffer_sectors; i++)
- kfree(sony_buffer[i]);
-out5:
- kfree(sony_buffer);
-out4:
- kfree(last_sony_subcode);
-out3:
- kfree(sony_toc);
-out2:
- blk_cleanup_queue(sonycd535_queue);
-out1a:
- unregister_blkdev(MAJOR_NR, CDU535_HANDLE);
-out1:
- if (sony535_irq_used)
- free_irq(sony535_irq_used, NULL);
- return err;
-Enodev_irq:
- if (sony535_irq_used)
- free_irq(sony535_irq_used, NULL);
-Enodev:
- printk("Did not find a " CDU535_MESSAGE_NAME " drive\n");
- return -EIO;
-}
-
-#ifndef MODULE
-
-/*
- * accept "kernel command line" parameters
- * (added by emoenke@gwdg.de)
- *
- * use: tell LILO:
- * sonycd535=0x320
- *
- * the address value has to be the existing CDROM port address.
- */
-static int __init
-sonycd535_setup(char *strings)
-{
- int ints[3];
- (void)get_options(strings, ARRAY_SIZE(ints), ints);
- /* if IRQ change and default io base desired,
- * then call with io base of 0
- */
- if (ints[0] > 0)
- if (ints[1] != 0)
- sony535_cd_base_io = ints[1];
- if (ints[0] > 1)
- sony535_irq_used = ints[2];
- if ((strings != NULL) && (*strings != '\0'))
- printk(CDU535_MESSAGE_NAME
- ": Warning: Unknown interface type: %s\n", strings);
-
- return 1;
-}
-
-__setup("sonycd535=", sonycd535_setup);
-
-#endif /* MODULE */
-
-static void __exit
-sony535_exit(void)
-{
- int i;
-
- release_region(sony535_cd_base_io, 4);
- for (i = 0; i < sony_buffer_sectors; i++)
- kfree(sony_buffer[i]);
- kfree(sony_buffer);
- kfree(last_sony_subcode);
- kfree(sony_toc);
- del_gendisk(cdu_disk);
- put_disk(cdu_disk);
- blk_cleanup_queue(sonycd535_queue);
- if (unregister_blkdev(MAJOR_NR, CDU535_HANDLE) == -EINVAL)
- printk("Uh oh, couldn't unregister " CDU535_HANDLE "\n");
- else
- printk(KERN_INFO CDU535_HANDLE " module released\n");
-}
-
-module_init(sony535_init);
-module_exit(sony535_exit);
-
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(CDU535_CDROM_MAJOR);
diff --git a/drivers/cdrom/sonycd535.h b/drivers/cdrom/sonycd535.h
deleted file mode 100644
index 5dea1ef168d6..000000000000
--- a/drivers/cdrom/sonycd535.h
+++ /dev/null
@@ -1,183 +0,0 @@
-#ifndef SONYCD535_H
-#define SONYCD535_H
-
-/*
- * define all the commands recognized by the CDU-531/5
- */
-#define SONY535_REQUEST_DRIVE_STATUS_1 (0x80)
-#define SONY535_REQUEST_SENSE (0x82)
-#define SONY535_REQUEST_DRIVE_STATUS_2 (0x84)
-#define SONY535_REQUEST_ERROR_STATUS (0x86)
-#define SONY535_REQUEST_AUDIO_STATUS (0x88)
-#define SONY535_INQUIRY (0x8a)
-
-#define SONY535_SET_INACTIVITY_TIME (0x90)
-
-#define SONY535_SEEK_AND_READ_N_BLOCKS_1 (0xa0)
-#define SONY535_SEEK_AND_READ_N_BLOCKS_2 (0xa4)
-#define SONY535_PLAY_AUDIO (0xa6)
-
-#define SONY535_REQUEST_DISC_CAPACITY (0xb0)
-#define SONY535_REQUEST_TOC_DATA (0xb2)
-#define SONY535_REQUEST_SUB_Q_DATA (0xb4)
-#define SONY535_REQUEST_ISRC (0xb6)
-#define SONY535_REQUEST_UPC_EAN (0xb8)
-
-#define SONY535_SET_DRIVE_MODE (0xc0)
-#define SONY535_REQUEST_DRIVE_MODE (0xc2)
-#define SONY535_SET_RETRY_COUNT (0xc4)
-
-#define SONY535_DIAGNOSTIC_1 (0xc6)
-#define SONY535_DIAGNOSTIC_4 (0xcc)
-#define SONY535_DIAGNOSTIC_5 (0xce)
-
-#define SONY535_EJECT_CADDY (0xd0)
-#define SONY535_DISABLE_EJECT_BUTTON (0xd2)
-#define SONY535_ENABLE_EJECT_BUTTON (0xd4)
-
-#define SONY535_HOLD (0xe0)
-#define SONY535_AUDIO_PAUSE_ON_OFF (0xe2)
-#define SONY535_SET_VOLUME (0xe8)
-
-#define SONY535_STOP (0xf0)
-#define SONY535_SPIN_UP (0xf2)
-#define SONY535_SPIN_DOWN (0xf4)
-
-#define SONY535_CLEAR_PARAMETERS (0xf6)
-#define SONY535_CLEAR_ENDING_ADDRESS (0xf8)
-
-/*
- * define some masks
- */
-#define SONY535_DATA_NOT_READY_BIT (0x1)
-#define SONY535_RESULT_NOT_READY_BIT (0x2)
-
-/*
- * drive status 1
- */
-#define SONY535_STATUS1_COMMAND_ERROR (0x1)
-#define SONY535_STATUS1_DATA_ERROR (0x2)
-#define SONY535_STATUS1_SEEK_ERROR (0x4)
-#define SONY535_STATUS1_DISC_TYPE_ERROR (0x8)
-#define SONY535_STATUS1_NOT_SPINNING (0x10)
-#define SONY535_STATUS1_EJECT_BUTTON_PRESSED (0x20)
-#define SONY535_STATUS1_CADDY_NOT_INSERTED (0x40)
-#define SONY535_STATUS1_BYTE_TWO_FOLLOWS (0x80)
-
-/*
- * drive status 2
- */
-#define SONY535_CDD_LOADING_ERROR (0x7)
-#define SONY535_CDD_NO_DISC (0x8)
-#define SONY535_CDD_UNLOADING_ERROR (0x9)
-#define SONY535_CDD_CADDY_NOT_INSERTED (0xd)
-#define SONY535_ATN_RESET_OCCURRED (0x2)
-#define SONY535_ATN_DISC_CHANGED (0x4)
-#define SONY535_ATN_RESET_AND_DISC_CHANGED (0x6)
-#define SONY535_ATN_EJECT_IN_PROGRESS (0xe)
-#define SONY535_ATN_BUSY (0xf)
-
-/*
- * define some parameters
- */
-#define SONY535_AUDIO_DRIVE_MODE (0)
-#define SONY535_CDROM_DRIVE_MODE (0xe0)
-
-#define SONY535_PLAY_OP_PLAYBACK (0)
-#define SONY535_PLAY_OP_ENTER_HOLD (1)
-#define SONY535_PLAY_OP_SET_AUDIO_ENDING_ADDR (2)
-#define SONY535_PLAY_OP_SCAN_FORWARD (3)
-#define SONY535_PLAY_OP_SCAN_BACKWARD (4)
-
-/*
- * convert from msf format to block number
- */
-#define SONY_BLOCK_NUMBER(m,s,f) (((m)*60L+(s))*75L+(f))
-#define SONY_BLOCK_NUMBER_MSF(x) (((x)[0]*60L+(x)[1])*75L+(x)[2])
-
-/*
- * error return values from the doSonyCmd() routines
- */
-#define TIME_OUT (-1)
-#define NO_CDROM (-2)
-#define BAD_STATUS (-3)
-#define CD_BUSY (-4)
-#define NOT_DATA_CD (-5)
-#define NO_ROOM (-6)
-
-#define LOG_START_OFFSET 150 /* Offset of first logical sector */
-
-#define SONY_JIFFIES_TIMEOUT (5*HZ) /* Maximum time
- the drive will wait/try for an
- operation */
-#define SONY_READY_RETRIES (50000) /* How many times to retry a
- spin waiting for a register
- to come ready */
-#define SONY535_FAST_POLLS (10000) /* how many times recheck
- status waiting for a data
- to become ready */
-
-typedef unsigned char Byte;
-
-/*
- * This is the complete status returned from the drive configuration request
- * command.
- */
-struct s535_sony_drive_config
-{
- char vendor_id[8];
- char product_id[16];
- char product_rev_level[4];
-};
-
-/* The following is returned from the request sub-q data command */
-struct s535_sony_subcode
-{
- unsigned char address :4;
- unsigned char control :4;
- unsigned char track_num;
- unsigned char index_num;
- unsigned char rel_msf[3];
- unsigned char abs_msf[3];
-};
-
-struct s535_sony_disc_capacity
-{
- Byte mFirstTrack, sFirstTrack, fFirstTrack;
- Byte mLeadOut, sLeadOut, fLeadOut;
-};
-
-/*
- * The following is returned from the request TOC (Table Of Contents) command.
- * (last_track_num-first_track_num+1) values are valid in tracks.
- */
-struct s535_sony_toc
-{
- unsigned char reserved0 :4;
- unsigned char control0 :4;
- unsigned char point0;
- unsigned char first_track_num;
- unsigned char reserved0a;
- unsigned char reserved0b;
- unsigned char reserved1 :4;
- unsigned char control1 :4;
- unsigned char point1;
- unsigned char last_track_num;
- unsigned char dummy1;
- unsigned char dummy2;
- unsigned char reserved2 :4;
- unsigned char control2 :4;
- unsigned char point2;
- unsigned char lead_out_start_msf[3];
- struct
- {
- unsigned char reserved :4;
- unsigned char control :4;
- unsigned char track;
- unsigned char track_start_msf[3];
- } tracks[100];
-
- unsigned int lead_out_start_lba;
-};
-
-#endif /* SONYCD535_H */
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-26 22:16:03 +0000