diff options
Diffstat (limited to 'drivers/dma/qcom')
| -rw-r--r-- | drivers/dma/qcom/bam_dma.c | 24 | ||||
| -rw-r--r-- | drivers/dma/qcom/gpi.c | 31 |
2 files changed, 41 insertions, 14 deletions
diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c index bbc3276992bb..c14557efd577 100644 --- a/drivers/dma/qcom/bam_dma.c +++ b/drivers/dma/qcom/bam_dma.c @@ -59,6 +59,9 @@ struct bam_desc_hw { #define DESC_FLAG_NWD BIT(12) #define DESC_FLAG_CMD BIT(11) +#define BAM_NDP_REVISION_START 0x20 +#define BAM_NDP_REVISION_END 0x27 + struct bam_async_desc { struct virt_dma_desc vd; @@ -398,6 +401,7 @@ struct bam_device { /* dma start transaction tasklet */ struct tasklet_struct task; + u32 bam_revision; }; /** @@ -441,8 +445,10 @@ static void bam_reset(struct bam_device *bdev) writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL)); /* set descriptor threshold, start with 4 bytes */ - writel_relaxed(DEFAULT_CNT_THRSHLD, - bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD)); + if (in_range(bdev->bam_revision, BAM_NDP_REVISION_START, + BAM_NDP_REVISION_END)) + writel_relaxed(DEFAULT_CNT_THRSHLD, + bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD)); /* Enable default set of h/w workarounds, ie all except BAM_FULL_PIPE */ writel_relaxed(BAM_CNFG_BITS_DEFAULT, bam_addr(bdev, 0, BAM_CNFG_BITS)); @@ -1000,9 +1006,10 @@ static void bam_apply_new_config(struct bam_chan *bchan, maxburst = bchan->slave.src_maxburst; else maxburst = bchan->slave.dst_maxburst; - - writel_relaxed(maxburst, - bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD)); + if (in_range(bdev->bam_revision, BAM_NDP_REVISION_START, + BAM_NDP_REVISION_END)) + writel_relaxed(maxburst, + bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD)); } bchan->reconfigure = 0; @@ -1192,10 +1199,11 @@ static int bam_init(struct bam_device *bdev) u32 val; /* read revision and configuration information */ - if (!bdev->num_ees) { - val = readl_relaxed(bam_addr(bdev, 0, BAM_REVISION)); + val = readl_relaxed(bam_addr(bdev, 0, BAM_REVISION)); + if (!bdev->num_ees) bdev->num_ees = (val >> NUM_EES_SHIFT) & NUM_EES_MASK; - } + + bdev->bam_revision = val & REVISION_MASK; /* check that configured EE is within range */ if (bdev->ee >= bdev->num_ees) diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c index 52a7c8f2498f..b1f0001cc99c 100644 --- a/drivers/dma/qcom/gpi.c +++ b/drivers/dma/qcom/gpi.c @@ -18,6 +18,7 @@ #include "../virt-dma.h" #define TRE_TYPE_DMA 0x10 +#define TRE_TYPE_IMMEDIATE_DMA 0x11 #define TRE_TYPE_GO 0x20 #define TRE_TYPE_CONFIG0 0x22 @@ -64,6 +65,7 @@ /* DMA TRE */ #define TRE_DMA_LEN GENMASK(23, 0) +#define TRE_DMA_IMMEDIATE_LEN GENMASK(3, 0) /* Register offsets from gpi-top */ #define GPII_n_CH_k_CNTXT_0_OFFS(n, k) (0x20000 + (0x4000 * (n)) + (0x80 * (k))) @@ -1711,6 +1713,7 @@ static int gpi_create_spi_tre(struct gchan *chan, struct gpi_desc *desc, dma_addr_t address; struct gpi_tre *tre; unsigned int i; + int len; /* first create config tre if applicable */ if (direction == DMA_MEM_TO_DEV && spi->set_config) { @@ -1763,14 +1766,30 @@ static int gpi_create_spi_tre(struct gchan *chan, struct gpi_desc *desc, tre_idx++; address = sg_dma_address(sgl); - tre->dword[0] = lower_32_bits(address); - tre->dword[1] = upper_32_bits(address); + len = sg_dma_len(sgl); - tre->dword[2] = u32_encode_bits(sg_dma_len(sgl), TRE_DMA_LEN); + /* Support Immediate dma for write transfers for data length up to 8 bytes */ + if (direction == DMA_MEM_TO_DEV && len <= 2 * sizeof(tre->dword[0])) { + /* + * For Immediate dma, data length may not always be length of 8 bytes, + * it can be length less than 8, hence initialize both dword's with 0 + */ + tre->dword[0] = 0; + tre->dword[1] = 0; + memcpy(&tre->dword[0], sg_virt(sgl), len); - tre->dword[3] = u32_encode_bits(TRE_TYPE_DMA, TRE_FLAGS_TYPE); - if (direction == DMA_MEM_TO_DEV) - tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_IEOT); + tre->dword[2] = u32_encode_bits(len, TRE_DMA_IMMEDIATE_LEN); + tre->dword[3] = u32_encode_bits(TRE_TYPE_IMMEDIATE_DMA, TRE_FLAGS_TYPE); + } else { + tre->dword[0] = lower_32_bits(address); + tre->dword[1] = upper_32_bits(address); + + tre->dword[2] = u32_encode_bits(len, TRE_DMA_LEN); + tre->dword[3] = u32_encode_bits(TRE_TYPE_DMA, TRE_FLAGS_TYPE); + } + + tre->dword[3] |= u32_encode_bits(direction == DMA_MEM_TO_DEV, + TRE_FLAGS_IEOT); for (i = 0; i < tre_idx; i++) dev_dbg(dev, "TRE:%d %x:%x:%x:%x\n", i, desc->tre[i].dword[0], |