diff options
Diffstat (limited to 'drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c')
| -rw-r--r-- | drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 67 |
1 files changed, 51 insertions, 16 deletions
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 181b6302e886..e3fed38a0d90 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -23,7 +23,6 @@ */ #include <drm/amdgpu_drm.h> -#include <drm/drm_aperture.h> #include <drm/drm_drv.h> #include <drm/drm_fbdev_generic.h> #include <drm/drm_gem.h> @@ -104,13 +103,15 @@ * - 3.46.0 - To enable hot plug amdgpu tests in libdrm * - 3.47.0 - Add AMDGPU_GEM_CREATE_DISCARDABLE and AMDGPU_VM_NOALLOC flags * - 3.48.0 - Add IP discovery version info to HW INFO - * 3.49.0 - Add gang submit into CS IOCTL + * - 3.49.0 - Add gang submit into CS IOCTL + * - 3.50.0 - Update AMDGPU_INFO_DEV_INFO IOCTL for minimum engine and memory clock + * Update AMDGPU_INFO_SENSOR IOCTL for PEAK_PSTATE engine and memory clock */ #define KMS_DRIVER_MAJOR 3 -#define KMS_DRIVER_MINOR 49 +#define KMS_DRIVER_MINOR 50 #define KMS_DRIVER_PATCHLEVEL 0 -int amdgpu_vram_limit; +unsigned int amdgpu_vram_limit = UINT_MAX; int amdgpu_vis_vram_limit; int amdgpu_gart_size = -1; /* auto */ int amdgpu_gtt_size = -1; /* auto */ @@ -180,6 +181,7 @@ int amdgpu_mes_kiq; int amdgpu_noretry = -1; int amdgpu_force_asic_type = -1; int amdgpu_tmz = -1; /* auto */ +uint amdgpu_freesync_vid_mode; int amdgpu_reset_method = -1; /* auto */ int amdgpu_num_kcq = -1; int amdgpu_smartshift_bias; @@ -230,17 +232,18 @@ module_param_named(vis_vramlimit, amdgpu_vis_vram_limit, int, 0444); /** * DOC: gartsize (uint) - * Restrict the size of GART in Mib (32, 64, etc.) for testing. The default is -1 (The size depends on asic). + * Restrict the size of GART (for kernel use) in Mib (32, 64, etc.) for testing. + * The default is -1 (The size depends on asic). */ -MODULE_PARM_DESC(gartsize, "Size of GART to setup in megabytes (32, 64, etc., -1=auto)"); +MODULE_PARM_DESC(gartsize, "Size of kernel GART to setup in megabytes (32, 64, etc., -1=auto)"); module_param_named(gartsize, amdgpu_gart_size, uint, 0600); /** * DOC: gttsize (int) - * Restrict the size of GTT domain in MiB for testing. The default is -1 (It's VRAM size if 3GB < VRAM < 3/4 RAM, - * otherwise 3/4 RAM size). + * Restrict the size of GTT domain (for userspace use) in MiB for testing. + * The default is -1 (Use 1/2 RAM, minimum value is 3GB). */ -MODULE_PARM_DESC(gttsize, "Size of the GTT domain in megabytes (-1 = auto)"); +MODULE_PARM_DESC(gttsize, "Size of the GTT userspace domain in megabytes (-1 = auto)"); module_param_named(gttsize, amdgpu_gtt_size, int, 0600); /** @@ -878,6 +881,32 @@ MODULE_PARM_DESC(tmz, "Enable TMZ feature (-1 = auto (default), 0 = off, 1 = on) module_param_named(tmz, amdgpu_tmz, int, 0444); /** + * DOC: freesync_video (uint) + * Enable the optimization to adjust front porch timing to achieve seamless + * mode change experience when setting a freesync supported mode for which full + * modeset is not needed. + * + * The Display Core will add a set of modes derived from the base FreeSync + * video mode into the corresponding connector's mode list based on commonly + * used refresh rates and VRR range of the connected display, when users enable + * this feature. From the userspace perspective, they can see a seamless mode + * change experience when the change between different refresh rates under the + * same resolution. Additionally, userspace applications such as Video playback + * can read this modeset list and change the refresh rate based on the video + * frame rate. Finally, the userspace can also derive an appropriate mode for a + * particular refresh rate based on the FreeSync Mode and add it to the + * connector's mode list. + * + * Note: This is an experimental feature. + * + * The default value: 0 (off). + */ +MODULE_PARM_DESC( + freesync_video, + "Enable freesync modesetting optimization feature (0 = off (default), 1 = on)"); +module_param_named(freesync_video, amdgpu_freesync_vid_mode, uint, 0444); + +/** * DOC: reset_method (int) * GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco) */ @@ -2037,6 +2066,15 @@ static int amdgpu_pci_probe(struct pci_dev *pdev, "See modparam exp_hw_support\n"); return -ENODEV; } + /* differentiate between P10 and P11 asics with the same DID */ + if (pdev->device == 0x67FF && + (pdev->revision == 0xE3 || + pdev->revision == 0xE7 || + pdev->revision == 0xF3 || + pdev->revision == 0xF7)) { + flags &= ~AMD_ASIC_MASK; + flags |= CHIP_POLARIS10; + } /* Due to hardware bugs, S/G Display on raven requires a 1:1 IOMMU mapping, * however, SME requires an indirect IOMMU mapping because the encryption @@ -2084,11 +2122,6 @@ static int amdgpu_pci_probe(struct pci_dev *pdev, } #endif - /* Get rid of things like offb */ - ret = drm_aperture_remove_conflicting_pci_framebuffers(pdev, &amdgpu_kms_driver); - if (ret) - return ret; - adev = devm_drm_dev_alloc(&pdev->dev, &amdgpu_kms_driver, typeof(*adev), ddev); if (IS_ERR(adev)) return PTR_ERR(adev); @@ -2106,12 +2139,12 @@ static int amdgpu_pci_probe(struct pci_dev *pdev, pci_set_drvdata(pdev, ddev); - ret = amdgpu_driver_load_kms(adev, ent->driver_data); + ret = amdgpu_driver_load_kms(adev, flags); if (ret) goto err_pci; retry_init: - ret = drm_dev_register(ddev, ent->driver_data); + ret = drm_dev_register(ddev, flags); if (ret == -EAGAIN && ++retry <= 3) { DRM_INFO("retry init %d\n", retry); /* Don't request EX mode too frequently which is attacking */ @@ -2569,6 +2602,8 @@ static int amdgpu_pmops_runtime_suspend(struct device *dev) amdgpu_device_baco_enter(drm_dev); } + dev_dbg(&pdev->dev, "asic/device is runtime suspended\n"); + return 0; } |