diff options
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/Makefile | 5 | ||||
-rw-r--r-- | drivers/i2c/busses/Kconfig | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-at91.c | 32 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-ismt.c | 4 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-mv64xxx.c | 3 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-mxs.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-qup.c | 12 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-rcar.c | 41 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-rk3x.c | 17 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-s3c2410.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-tegra.c | 57 | ||||
-rw-r--r-- | drivers/i2c/i2c-acpi.c | 364 | ||||
-rw-r--r-- | drivers/i2c/i2c-core.c | 378 |
13 files changed, 502 insertions, 417 deletions
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index e0228b228256..1722f50f2473 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -2,11 +2,8 @@ # Makefile for the i2c core. # -i2ccore-y := i2c-core.o -i2ccore-$(CONFIG_ACPI) += i2c-acpi.o - obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o -obj-$(CONFIG_I2C) += i2ccore.o +obj-$(CONFIG_I2C) += i2c-core.o obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o obj-$(CONFIG_I2C_MUX) += i2c-mux.o diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 2ac87fa3058d..2e45ae3796f1 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -357,7 +357,7 @@ config I2C_BCM_KONA If you say yes to this option, support will be included for the I2C interface on the Broadcom Kona family of processors. - If you do not need KONA I2C inteface, say N. + If you do not need KONA I2C interface, say N. config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support" diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index 79a68999a696..917d54588d95 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -101,6 +101,7 @@ struct at91_twi_dev { unsigned twi_cwgr_reg; struct at91_twi_pdata *pdata; bool use_dma; + bool recv_len_abort; struct at91_twi_dma dma; }; @@ -267,12 +268,24 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev) *dev->buf = at91_twi_read(dev, AT91_TWI_RHR) & 0xff; --dev->buf_len; + /* return if aborting, we only needed to read RHR to clear RXRDY*/ + if (dev->recv_len_abort) + return; + /* handle I2C_SMBUS_BLOCK_DATA */ if (unlikely(dev->msg->flags & I2C_M_RECV_LEN)) { - dev->msg->flags &= ~I2C_M_RECV_LEN; - dev->buf_len += *dev->buf; - dev->msg->len = dev->buf_len + 1; - dev_dbg(dev->dev, "received block length %d\n", dev->buf_len); + /* ensure length byte is a valid value */ + if (*dev->buf <= I2C_SMBUS_BLOCK_MAX && *dev->buf > 0) { + dev->msg->flags &= ~I2C_M_RECV_LEN; + dev->buf_len += *dev->buf; + dev->msg->len = dev->buf_len + 1; + dev_dbg(dev->dev, "received block length %d\n", + dev->buf_len); + } else { + /* abort and send the stop by reading one more byte */ + dev->recv_len_abort = true; + dev->buf_len = 1; + } } /* send stop if second but last byte has been read */ @@ -421,8 +434,8 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) } } - ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, - dev->adapter.timeout); + ret = wait_for_completion_io_timeout(&dev->cmd_complete, + dev->adapter.timeout); if (ret == 0) { dev_err(dev->dev, "controller timed out\n"); at91_init_twi_bus(dev); @@ -444,6 +457,12 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) ret = -EIO; goto error; } + if (dev->recv_len_abort) { + dev_err(dev->dev, "invalid smbus block length recvd\n"); + ret = -EPROTO; + goto error; + } + dev_dbg(dev->dev, "transfer complete\n"); return 0; @@ -500,6 +519,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num) dev->buf_len = m_start->len; dev->buf = m_start->buf; dev->msg = m_start; + dev->recv_len_abort = false; ret = at91_do_twi_transfer(dev); diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index 984492553e95..d9ee43c80cde 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -497,7 +497,7 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr, desc->wr_len_cmd = dma_size; desc->control |= ISMT_DESC_BLK; priv->dma_buffer[0] = command; - memcpy(&priv->dma_buffer[1], &data->block[1], dma_size); + memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1); } else { /* Block Read */ dev_dbg(dev, "I2C_SMBUS_BLOCK_DATA: READ\n"); @@ -525,7 +525,7 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr, desc->wr_len_cmd = dma_size; desc->control |= ISMT_DESC_I2C; priv->dma_buffer[0] = command; - memcpy(&priv->dma_buffer[1], &data->block[1], dma_size); + memcpy(&priv->dma_buffer[1], &data->block[1], dma_size - 1); } else { /* i2c Block Read */ dev_dbg(dev, "I2C_SMBUS_I2C_BLOCK_DATA: READ\n"); diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 6dc5ded86f62..2f64273d3f2b 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -746,8 +746,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, } tclk = clk_get_rate(drv_data->clk); - rc = of_property_read_u32(np, "clock-frequency", &bus_freq); - if (rc) + if (of_property_read_u32(np, "clock-frequency", &bus_freq)) bus_freq = 100000; /* 100kHz by default */ if (!mv64xxx_find_baud_factors(bus_freq, tclk, diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 7170fc892829..65a21fed08b5 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -429,7 +429,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap, ret = mxs_i2c_pio_wait_xfer_end(i2c); if (ret) { dev_err(i2c->dev, - "PIO: Failed to send SELECT command!\n"); + "PIO: Failed to send READ command!\n"); goto cleanup; } diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index 3a4d64e1dfb1..092d89bd3224 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -674,16 +674,20 @@ static int qup_i2c_probe(struct platform_device *pdev) qup->adap.dev.of_node = pdev->dev.of_node; strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name)); - ret = i2c_add_adapter(&qup->adap); - if (ret) - goto fail; - pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC); pm_runtime_use_autosuspend(qup->dev); pm_runtime_set_active(qup->dev); pm_runtime_enable(qup->dev); + + ret = i2c_add_adapter(&qup->adap); + if (ret) + goto fail_runtime; + return 0; +fail_runtime: + pm_runtime_disable(qup->dev); + pm_runtime_set_suspended(qup->dev); fail: qup_i2c_disable_clocks(qup); return ret; diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index f3c7139dfa25..e506fcd3ca04 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -34,6 +34,7 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/slab.h> +#include <linux/spinlock.h> /* register offsets */ #define ICSCR 0x00 /* slave ctrl */ @@ -75,8 +76,8 @@ #define RCAR_IRQ_RECV (MNR | MAL | MST | MAT | MDR) #define RCAR_IRQ_STOP (MST) -#define RCAR_IRQ_ACK_SEND (~(MAT | MDE)) -#define RCAR_IRQ_ACK_RECV (~(MAT | MDR)) +#define RCAR_IRQ_ACK_SEND (~(MAT | MDE) & 0xFF) +#define RCAR_IRQ_ACK_RECV (~(MAT | MDR) & 0xFF) #define ID_LAST_MSG (1 << 0) #define ID_IOERROR (1 << 1) @@ -95,6 +96,7 @@ struct rcar_i2c_priv { struct i2c_msg *msg; struct clk *clk; + spinlock_t lock; wait_queue_head_t wait; int pos; @@ -365,20 +367,20 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr) struct rcar_i2c_priv *priv = ptr; u32 msr; + /*-------------- spin lock -----------------*/ + spin_lock(&priv->lock); + msr = rcar_i2c_read(priv, ICMSR); + /* Only handle interrupts that are currently enabled */ + msr &= rcar_i2c_read(priv, ICMIER); + /* Arbitration lost */ if (msr & MAL) { rcar_i2c_flags_set(priv, (ID_DONE | ID_ARBLOST)); goto out; } - /* Stop */ - if (msr & MST) { - rcar_i2c_flags_set(priv, ID_DONE); - goto out; - } - /* Nack */ if (msr & MNR) { /* go to stop phase */ @@ -388,6 +390,12 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr) goto out; } + /* Stop */ + if (msr & MST) { + rcar_i2c_flags_set(priv, ID_DONE); + goto out; + } + if (rcar_i2c_is_recv(priv)) rcar_i2c_flags_set(priv, rcar_i2c_irq_recv(priv, msr)); else @@ -400,6 +408,9 @@ out: wake_up(&priv->wait); } + spin_unlock(&priv->lock); + /*-------------- spin unlock -----------------*/ + return IRQ_HANDLED; } @@ -409,14 +420,21 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, { struct rcar_i2c_priv *priv = i2c_get_adapdata(adap); struct device *dev = rcar_i2c_priv_to_dev(priv); + unsigned long flags; int i, ret, timeout; pm_runtime_get_sync(dev); + /*-------------- spin lock -----------------*/ + spin_lock_irqsave(&priv->lock, flags); + rcar_i2c_init(priv); /* start clock */ rcar_i2c_write(priv, ICCCR, priv->icccr); + spin_unlock_irqrestore(&priv->lock, flags); + /*-------------- spin unlock -----------------*/ + ret = rcar_i2c_bus_barrier(priv); if (ret < 0) goto out; @@ -428,6 +446,9 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, break; } + /*-------------- spin lock -----------------*/ + spin_lock_irqsave(&priv->lock, flags); + /* init each data */ priv->msg = &msgs[i]; priv->pos = 0; @@ -437,6 +458,9 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, ret = rcar_i2c_prepare_msg(priv); + spin_unlock_irqrestore(&priv->lock, flags); + /*-------------- spin unlock -----------------*/ + if (ret < 0) break; @@ -540,6 +564,7 @@ static int rcar_i2c_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); init_waitqueue_head(&priv->wait); + spin_lock_init(&priv->lock); adap = &priv->adap; adap->nr = pdev->id; diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 69e11853e8bf..b38b0529946a 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -238,7 +238,7 @@ static void rk3x_i2c_fill_transmit_buf(struct rk3x_i2c *i2c) for (i = 0; i < 8; ++i) { val = 0; for (j = 0; j < 4; ++j) { - if (i2c->processed == i2c->msg->len) + if ((i2c->processed == i2c->msg->len) && (cnt != 0)) break; if (i2c->processed == 0 && cnt == 0) @@ -323,6 +323,10 @@ static void rk3x_i2c_handle_read(struct rk3x_i2c *i2c, unsigned int ipd) /* ack interrupt */ i2c_writel(i2c, REG_INT_MBRF, REG_IPD); + /* Can only handle a maximum of 32 bytes at a time */ + if (len > 32) + len = 32; + /* read the data from receive buffer */ for (i = 0; i < len; ++i) { if (i % 4 == 0) @@ -429,12 +433,11 @@ static void rk3x_i2c_set_scl_rate(struct rk3x_i2c *i2c, unsigned long scl_rate) unsigned long i2c_rate = clk_get_rate(i2c->clk); unsigned int div; - /* SCL rate = (clk rate) / (8 * DIV) */ - div = DIV_ROUND_UP(i2c_rate, scl_rate * 8); - - /* The lower and upper half of the CLKDIV reg describe the length of - * SCL low & high periods. */ - div = DIV_ROUND_UP(div, 2); + /* set DIV = DIVH = DIVL + * SCL rate = (clk rate) / (8 * (DIVH + 1 + DIVL + 1)) + * = (clk rate) / (16 * (DIV + 1)) + */ + div = DIV_ROUND_UP(i2c_rate, scl_rate * 16) - 1; i2c_writel(i2c, (div << 16) | (div & 0xffff), REG_CLKDIV); } diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index e086fb075f2b..e3b0337faeb7 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -244,7 +244,7 @@ static bool is_ack(struct s3c24xx_i2c *i2c) } usleep_range(1000, 2000); } - dev_err(i2c->dev, "ack was not recieved\n"); + dev_err(i2c->dev, "ack was not received\n"); return false; } diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 87d0371cebb7..efba1ebe16ba 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -380,34 +380,33 @@ static inline int tegra_i2c_clock_enable(struct tegra_i2c_dev *i2c_dev) { int ret; if (!i2c_dev->hw->has_single_clk_source) { - ret = clk_prepare_enable(i2c_dev->fast_clk); + ret = clk_enable(i2c_dev->fast_clk); if (ret < 0) { dev_err(i2c_dev->dev, "Enabling fast clk failed, err %d\n", ret); return ret; } } - ret = clk_prepare_enable(i2c_dev->div_clk); + ret = clk_enable(i2c_dev->div_clk); if (ret < 0) { dev_err(i2c_dev->dev, "Enabling div clk failed, err %d\n", ret); - clk_disable_unprepare(i2c_dev->fast_clk); + clk_disable(i2c_dev->fast_clk); } return ret; } static inline void tegra_i2c_clock_disable(struct tegra_i2c_dev *i2c_dev) { - clk_disable_unprepare(i2c_dev->div_clk); + clk_disable(i2c_dev->div_clk); if (!i2c_dev->hw->has_single_clk_source) - clk_disable_unprepare(i2c_dev->fast_clk); + clk_disable(i2c_dev->fast_clk); } static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) { u32 val; int err = 0; - int clk_multiplier = I2C_CLK_MULTIPLIER_STD_FAST_MODE; u32 clk_divisor; err = tegra_i2c_clock_enable(i2c_dev); @@ -428,9 +427,6 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) i2c_writel(i2c_dev, val, I2C_CNFG); i2c_writel(i2c_dev, 0, I2C_INT_MASK); - clk_multiplier *= (i2c_dev->hw->clk_divisor_std_fast_mode + 1); - clk_set_rate(i2c_dev->div_clk, i2c_dev->bus_clk_rate * clk_multiplier); - /* Make sure clock divisor programmed correctly */ clk_divisor = i2c_dev->hw->clk_divisor_hs_mode; clk_divisor |= i2c_dev->hw->clk_divisor_std_fast_mode << @@ -712,6 +708,7 @@ static int tegra_i2c_probe(struct platform_device *pdev) void __iomem *base; int irq; int ret = 0; + int clk_multiplier = I2C_CLK_MULTIPLIER_STD_FAST_MODE; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, res); @@ -777,17 +774,39 @@ static int tegra_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2c_dev); + if (!i2c_dev->hw->has_single_clk_source) { + ret = clk_prepare(i2c_dev->fast_clk); + if (ret < 0) { + dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret); + return ret; + } + } + + clk_multiplier *= (i2c_dev->hw->clk_divisor_std_fast_mode + 1); + ret = clk_set_rate(i2c_dev->div_clk, + i2c_dev->bus_clk_rate * clk_multiplier); + if (ret) { + dev_err(i2c_dev->dev, "Clock rate change failed %d\n", ret); + goto unprepare_fast_clk; + } + + ret = clk_prepare(i2c_dev->div_clk); + if (ret < 0) { + dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret); + goto unprepare_fast_clk; + } + ret = tegra_i2c_init(i2c_dev); if (ret) { dev_err(&pdev->dev, "Failed to initialize i2c controller"); - return ret; + goto unprepare_div_clk; } ret = devm_request_irq(&pdev->dev, i2c_dev->irq, tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev); if (ret) { dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq); - return ret; + goto unprepare_div_clk; } i2c_set_adapdata(&i2c_dev->adapter, i2c_dev); @@ -803,16 +822,30 @@ static int tegra_i2c_probe(struct platform_device *pdev) ret = i2c_add_numbered_adapter(&i2c_dev->adapter); if (ret) { dev_err(&pdev->dev, "Failed to add I2C adapter\n"); - return ret; + goto unprepare_div_clk; } return 0; + +unprepare_div_clk: + clk_unprepare(i2c_dev->div_clk); + +unprepare_fast_clk: + if (!i2c_dev->hw->has_single_clk_source) + clk_unprepare(i2c_dev->fast_clk); + + return ret; } static int tegra_i2c_remove(struct platform_device *pdev) { struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev); i2c_del_adapter(&i2c_dev->adapter); + + clk_unprepare(i2c_dev->div_clk); + if (!i2c_dev->hw->has_single_clk_source) + clk_unprepare(i2c_dev->fast_clk); + return 0; } diff --git a/drivers/i2c/i2c-acpi.c b/drivers/i2c/i2c-acpi.c deleted file mode 100644 index 0dbc18c15c43..000000000000 --- a/drivers/i2c/i2c-acpi.c +++ /dev/null @@ -1,364 +0,0 @@ -/* - * I2C ACPI code - * - * Copyright (C) 2014 Intel Corp - * - * Author: Lan Tianyu <tianyu.lan@intel.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - */ -#define pr_fmt(fmt) "I2C/ACPI : " fmt - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/i2c.h> -#include <linux/acpi.h> - -struct acpi_i2c_handler_data { - struct acpi_connection_info info; - struct i2c_adapter *adapter; -}; - -struct gsb_buffer { - u8 status; - u8 len; - union { - u16 wdata; - u8 bdata; - u8 data[0]; - }; -} __packed; - -static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data) -{ - struct i2c_board_info *info = data; - - if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) { - struct acpi_resource_i2c_serialbus *sb; - - sb = &ares->data.i2c_serial_bus; - if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) { - info->addr = sb->slave_address; - if (sb->access_mode == ACPI_I2C_10BIT_MODE) - info->flags |= I2C_CLIENT_TEN; - } - } else if (info->irq < 0) { - struct resource r; - - if (acpi_dev_resource_interrupt(ares, 0, &r)) - info->irq = r.start; - } - - /* Tell the ACPI core to skip this resource */ - return 1; -} - -static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level, - void *data, void **return_value) -{ - struct i2c_adapter *adapter = data; - struct list_head resource_list; - struct i2c_board_info info; - struct acpi_device *adev; - int ret; - - if (acpi_bus_get_device(handle, &adev)) - return AE_OK; - if (acpi_bus_get_status(adev) || !adev->status.present) - return AE_OK; - - memset(&info, 0, sizeof(info)); - info.acpi_node.companion = adev; - info.irq = -1; - - INIT_LIST_HEAD(&resource_list); - ret = acpi_dev_get_resources(adev, &resource_list, - acpi_i2c_add_resource, &info); - acpi_dev_free_resource_list(&resource_list); - - if (ret < 0 || !info.addr) - return AE_OK; - - adev->power.flags.ignore_parent = true; - strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type)); - if (!i2c_new_device(adapter, &info)) { - adev->power.flags.ignore_parent = false; - dev_err(&adapter->dev, - "failed to add I2C device %s from ACPI\n", - dev_name(&adev->dev)); - } - - return AE_OK; -} - -/** - * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter - * @adap: pointer to adapter - * - * Enumerate all I2C slave devices behind this adapter by walking the ACPI - * namespace. When a device is found it will be added to the Linux device - * model and bound to the corresponding ACPI handle. - */ -void acpi_i2c_register_devices(struct i2c_adapter *adap) -{ - acpi_handle handle; - acpi_status status; - - if (!adap->dev.parent) - return; - - handle = ACPI_HANDLE(adap->dev.parent); - if (!handle) - return; - - status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1, - acpi_i2c_add_device, NULL, - adap, NULL); - if (ACPI_FAILURE(status)) - dev_warn(&adap->dev, "failed to enumerate I2C slaves\n"); -} - -#ifdef CONFIG_ACPI_I2C_OPREGION -static int acpi_gsb_i2c_read_bytes(struct i2c_client *client, - u8 cmd, u8 *data, u8 data_len) -{ - - struct i2c_msg msgs[2]; - int ret; - u8 *buffer; - - buffer = kzalloc(data_len, GFP_KERNEL); - if (!buffer) - return AE_NO_MEMORY; - - msgs[0].addr = client->addr; - msgs[0].flags = client->flags; - msgs[0].len = 1; - msgs[0].buf = &cmd; - - msgs[1].addr = client->addr; - msgs[1].flags = client->flags | I2C_M_RD; - msgs[1].len = data_len; - msgs[1].buf = buffer; - - ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); - if (ret < 0) - dev_err(&client->adapter->dev, "i2c read failed\n"); - else - memcpy(data, buffer, data_len); - - kfree(buffer); - return ret; -} - -static int acpi_gsb_i2c_write_bytes(struct i2c_client *client, - u8 cmd, u8 *data, u8 data_len) -{ - - struct i2c_msg msgs[1]; - u8 *buffer; - int ret = AE_OK; - - buffer = kzalloc(data_len + 1, GFP_KERNEL); - if (!buffer) - return AE_NO_MEMORY; - - buffer[0] = cmd; - memcpy(buffer + 1, data, data_len); - - msgs[0].addr = client->addr; - msgs[0].flags = client->flags; - msgs[0].len = data_len + 1; - msgs[0].buf = buffer; - - ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); - if (ret < 0) - dev_err(&client->adapter->dev, "i2c write failed\n"); - - kfree(buffer); - return ret; -} - -static acpi_status -acpi_i2c_space_handler(u32 function, acpi_physical_address command, - u32 bits, u64 *value64, - void *handler_context, void *region_context) -{ - struct gsb_buffer *gsb = (struct gsb_buffer *)value64; - struct acpi_i2c_handler_data *data = handler_context; - struct acpi_connection_info *info = &data->info; - struct acpi_resource_i2c_serialbus *sb; - struct i2c_adapter *adapter = data->adapter; - struct i2c_client client; - struct acpi_resource *ares; - u32 accessor_type = function >> 16; - u8 action = function & ACPI_IO_MASK; - acpi_status ret = AE_OK; - int status; - - ret = acpi_buffer_to_resource(info->connection, info->length, &ares); - if (ACPI_FAILURE(ret)) - return ret; - - if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) { - ret = AE_BAD_PARAMETER; - goto err; - } - - sb = &ares->data.i2c_serial_bus; - if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) { - ret = AE_BAD_PARAMETER; - goto err; - } - - memset(&client, 0, sizeof(client)); - client.adapter = adapter; - client.addr = sb->slave_address; - client.flags = 0; - - if (sb->access_mode == ACPI_I2C_10BIT_MODE) - client.flags |= I2C_CLIENT_TEN; - - switch (accessor_type) { - case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV: - if (action == ACPI_READ) { - status = i2c_smbus_read_byte(&client); - if (status >= 0) { - gsb->bdata = status; - status = 0; - } - } else { - status = i2c_smbus_write_byte(&client, gsb->bdata); - } - break; - - case ACPI_GSB_ACCESS_ATTRIB_BYTE: - if (action == ACPI_READ) { - status = i2c_smbus_read_byte_data(&client, command); - if (status >= 0) { - gsb->bdata = status; - status = 0; - } - } else { - status = i2c_smbus_write_byte_data(&client, command, - gsb->bdata); - } - break; - - case ACPI_GSB_ACCESS_ATTRIB_WORD: - if (action == ACPI_READ) { - status = i2c_smbus_read_word_data(&client, command); - if (status >= 0) { - gsb->wdata = status; - status = 0; - } - } else { - status = i2c_smbus_write_word_data(&client, command, - gsb->wdata); - } - break; - - case ACPI_GSB_ACCESS_ATTRIB_BLOCK: - if (action == ACPI_READ) { - status = i2c_smbus_read_block_data(&client, command, - gsb->data); - if (status >= 0) { - gsb->len = status; - status = 0; - } - } else { - status = i2c_smbus_write_block_data(&client, command, - gsb->len, gsb->data); - } - break; - - case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE: - if (action == ACPI_READ) { - status = acpi_gsb_i2c_read_bytes(&client, command, - gsb->data, info->access_length); - if (status > 0) - status = 0; - } else { - status = acpi_gsb_i2c_write_bytes(&client, command, - gsb->data, info->access_length); - } - break; - - default: - pr_info("protocol(0x%02x) is not supported.\n", accessor_type); - ret = AE_BAD_PARAMETER; - goto err; - } - - gsb->status = status; - - err: - ACPI_FREE(ares); - return ret; -} - - -int acpi_i2c_install_space_handler(struct i2c_adapter *adapter) -{ - acpi_handle handle = ACPI_HANDLE(adapter->dev.parent); - struct acpi_i2c_handler_data *data; - acpi_status status; - - if (!handle) - return -ENODEV; - - data = kzalloc(sizeof(struct acpi_i2c_handler_data), - GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->adapter = adapter; - status = acpi_bus_attach_private_data(handle, (void *)data); - if (ACPI_FAILURE(status)) { - kfree(data); - return -ENOMEM; - } - - status = acpi_install_address_space_handler(handle, - ACPI_ADR_SPACE_GSBUS, - &acpi_i2c_space_handler, - NULL, - data); - if (ACPI_FAILURE(status)) { - dev_err(&adapter->dev, "Error installing i2c space handler\n"); - acpi_bus_detach_private_data(handle); - kfree(data); - return -ENOMEM; - } - - return 0; -} - -void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter) -{ - acpi_handle handle = ACPI_HANDLE(adapter->dev.parent); - struct acpi_i2c_handler_data *data; - acpi_status status; - - if (!handle) - return; - - acpi_remove_address_space_handler(handle, - ACPI_ADR_SPACE_GSBUS, - &acpi_i2c_space_handler); - - status = acpi_bus_get_private_data(handle, (void **)&data); - if (ACPI_SUCCESS(status)) - kfree(data); - - acpi_bus_detach_private_data(handle); -} -#endif diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 632057a44615..2f90ac6a7f79 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -27,6 +27,8 @@ OF support is copyright (c) 2008 Jochen Friedrich <jochen@scram.de> (based on a previous patch from Jon Smirl <jonsmirl@gmail.com>) and (c) 2013 Wolfram Sang <wsa@the-dreams.de> + I2C ACPI code Copyright (C) 2014 Intel Corp + Author: Lan Tianyu <tianyu.lan@intel.com> */ #include <linux/module.h> @@ -48,6 +50,7 @@ #include <linux/irqflags.h> #include <linux/rwsem.h> #include <linux/pm_runtime.h> +#include <linux/pm_domain.h> #include <linux/acpi.h> #include <linux/jump_label.h> #include <asm/uaccess.h> @@ -78,6 +81,368 @@ void i2c_transfer_trace_unreg(void) static_key_slow_dec(&i2c_trace_msg); } +#if defined(CONFIG_ACPI) +struct acpi_i2c_handler_data { + struct acpi_connection_info info; + struct i2c_adapter *adapter; +}; + +struct gsb_buffer { + u8 status; + u8 len; + union { + u16 wdata; + u8 bdata; + u8 data[0]; + }; +} __packed; + +static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data) +{ + struct i2c_board_info *info = data; + + if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) { + struct acpi_resource_i2c_serialbus *sb; + + sb = &ares->data.i2c_serial_bus; + if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) { + info->addr = sb->slave_address; + if (sb->access_mode == ACPI_I2C_10BIT_MODE) + info->flags |= I2C_CLIENT_TEN; + } + } else if (info->irq < 0) { + struct resource r; + + if (acpi_dev_resource_interrupt(ares, 0, &r)) + info->irq = r.start; + } + + /* Tell the ACPI core to skip this resource */ + return 1; +} + +static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level, + void *data, void **return_value) +{ + struct i2c_adapter *adapter = data; + struct list_head resource_list; + struct i2c_board_info info; + struct acpi_device *adev; + int ret; + + if (acpi_bus_get_device(handle, &adev)) + return AE_OK; + if (acpi_bus_get_status(adev) || !adev->status.present) + return AE_OK; + + memset(&info, 0, sizeof(info)); + info.acpi_node.companion = adev; + info.irq = -1; + + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(adev, &resource_list, + acpi_i2c_add_resource, &info); + acpi_dev_free_resource_list(&resource_list); + + if (ret < 0 || !info.addr) + return AE_OK; + + adev->power.flags.ignore_parent = true; + strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type)); + if (!i2c_new_device(adapter, &info)) { + adev->power.flags.ignore_parent = false; + dev_err(&adapter->dev, + "failed to add I2C device %s from ACPI\n", + dev_name(&adev->dev)); + } + + return AE_OK; +} + +/** + * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter + * @adap: pointer to adapter + * + * Enumerate all I2C slave devices behind this adapter by walking the ACPI + * namespace. When a device is found it will be added to the Linux device + * model and bound to the corresponding ACPI handle. + */ +static void acpi_i2c_register_devices(struct i2c_adapter *adap) +{ + acpi_handle handle; + acpi_status status; + + if (!adap->dev.parent) + return; + + handle = ACPI_HANDLE(adap->dev.parent); + if (!handle) + return; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1, + acpi_i2c_add_device, NULL, + adap, NULL); + if (ACPI_FAILURE(status)) + dev_warn(&adap->dev, "failed to enumerate I2C slaves\n"); +} + +#else /* CONFIG_ACPI */ +static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) { } +#endif /* CONFIG_ACPI */ + +#ifdef CONFIG_ACPI_I2C_OPREGION +static int acpi_gsb_i2c_read_bytes(struct i2c_client *client, + u8 cmd, u8 *data, u8 data_len) +{ + + struct i2c_msg msgs[2]; + int ret; + u8 *buffer; + + buffer = kzalloc(data_len, GFP_KERNEL); + if (!buffer) + return AE_NO_MEMORY; + + msgs[0].addr = client->addr; + msgs[0].flags = client->flags; + msgs[0].len = 1; + msgs[0].buf = &cmd; + + msgs[1].addr = client->addr; + msgs[1].flags = client->flags | I2C_M_RD; + msgs[1].len = data_len; + msgs[1].buf = buffer; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + dev_err(&client->adapter->dev, "i2c read failed\n"); + else + memcpy(data, buffer, data_len); + + kfree(buffer); + return ret; +} + +static int acpi_gsb_i2c_write_bytes(struct i2c_client *client, + u8 cmd, u8 *data, u8 data_len) +{ + + struct i2c_msg msgs[1]; + u8 *buffer; + int ret = AE_OK; + + buffer = kzalloc(data_len + 1, GFP_KERNEL); + if (!buffer) + return AE_NO_MEMORY; + + buffer[0] = cmd; + memcpy(buffer + 1, data, data_len); + + msgs[0].addr = client->addr; + msgs[0].flags = client->flags; + msgs[0].len = data_len + 1; + msgs[0].buf = buffer; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + dev_err(&client->adapter->dev, "i2c write failed\n"); + + kfree(buffer); + return ret; +} + +static acpi_status +acpi_i2c_space_handler(u32 function, acpi_physical_address command, + u32 bits, u64 *value64, + void *handler_context, void *region_context) +{ + struct gsb_buffer *gsb = (struct gsb_buffer *)value64; + struct acpi_i2c_handler_data *data = handler_context; + struct acpi_connection_info *info = &data->info; + struct acpi_resource_i2c_serialbus *sb; + struct i2c_adapter *adapter = data->adapter; + struct i2c_client client; + struct acpi_resource *ares; + u32 accessor_type = function >> 16; + u8 action = function & ACPI_IO_MASK; + acpi_status ret = AE_OK; + int status; + + ret = acpi_buffer_to_resource(info->connection, info->length, &ares); + if (ACPI_FAILURE(ret)) + return ret; + + if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) { + ret = AE_BAD_PARAMETER; + goto err; + } + + sb = &ares->data.i2c_serial_bus; + if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) { + ret = AE_BAD_PARAMETER; + goto err; + } + + memset(&client, 0, sizeof(client)); + client.adapter = adapter; + client.addr = sb->slave_address; + client.flags = 0; + + if (sb->access_mode == ACPI_I2C_10BIT_MODE) + client.flags |= I2C_CLIENT_TEN; + + switch (accessor_type) { + case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV: + if (action == ACPI_READ) { + status = i2c_smbus_read_byte(&client); + if (status >= 0) { + gsb->bdata = status; + status = 0; + } + } else { + status = i2c_smbus_write_byte(&client, gsb->bdata); + } + break; + + case ACPI_GSB_ACCESS_ATTRIB_BYTE: + if (action == ACPI_READ) { + status = i2c_smbus_read_byte_data(&client, command); + if (status >= 0) { + gsb->bdata = status; + status = 0; + } + } else { + status = i2c_smbus_write_byte_data(&client, command, + gsb->bdata); + } + break; + + case ACPI_GSB_ACCESS_ATTRIB_WORD: + if (action == ACPI_READ) { + status = i2c_smbus_read_word_data(&client, command); + if (status >= 0) { + gsb->wdata = status; + status = 0; + } + } else { + status = i2c_smbus_write_word_data(&client, command, + gsb->wdata); + } + break; + + case ACPI_GSB_ACCESS_ATTRIB_BLOCK: + if (action == ACPI_READ) { + status = i2c_smbus_read_block_data(&client, command, + gsb->data); + if (status >= 0) { + gsb->len = status; + status = 0; + } + } else { + status = i2c_smbus_write_block_data(&client, command, + gsb->len, gsb->data); + } + break; + + case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE: + if (action == ACPI_READ) { + status = acpi_gsb_i2c_read_bytes(&client, command, + gsb->data, info->access_length); + if (status > 0) + status = 0; + } else { + status = acpi_gsb_i2c_write_bytes(&client, command, + gsb->data, info->access_length); + } + break; + + default: + pr_info("protocol(0x%02x) is not supported.\n", accessor_type); + ret = AE_BAD_PARAMETER; + goto err; + } + + gsb->status = status; + + err: + ACPI_FREE(ares); + return ret; +} + + +static int acpi_i2c_install_space_handler(struct i2c_adapter *adapter) +{ + acpi_handle handle; + struct acpi_i2c_handler_data *data; + acpi_status status; + + if (!adapter->dev.parent) + return -ENODEV; + + handle = ACPI_HANDLE(adapter->dev.parent); + + if (!handle) + return -ENODEV; + + data = kzalloc(sizeof(struct acpi_i2c_handler_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->adapter = adapter; + status = acpi_bus_attach_private_data(handle, (void *)data); + if (ACPI_FAILURE(status)) { + kfree(data); + return -ENOMEM; + } + + status = acpi_install_address_space_handler(handle, + ACPI_ADR_SPACE_GSBUS, + &acpi_i2c_space_handler, + NULL, + data); + if (ACPI_FAILURE(status)) { + dev_err(&adapter->dev, "Error installing i2c space handler\n"); + acpi_bus_detach_private_data(handle); + kfree(data); + return -ENOMEM; + } + + return 0; +} + +static void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter) +{ + acpi_handle handle; + struct acpi_i2c_handler_data *data; + acpi_status status; + + if (!adapter->dev.parent) + return; + + handle = ACPI_HANDLE(adapter->dev.parent); + + if (!handle) + return; + + acpi_remove_address_space_handler(handle, + ACPI_ADR_SPACE_GSBUS, + &acpi_i2c_space_handler); + + status = acpi_bus_get_private_data(handle, (void **)&data); + if (ACPI_SUCCESS(status)) + kfree(data); + + acpi_bus_detach_private_data(handle); +} +#else /* CONFIG_ACPI_I2C_OPREGION */ +static inline void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter) +{ } + +static inline int acpi_i2c_install_space_handler(struct i2c_adapter *adapter) +{ return 0; } +#endif /* CONFIG_ACPI_I2C_OPREGION */ + /* ------------------------------------------------------------------------- */ static const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id, @@ -279,10 +644,13 @@ static int i2c_device_probe(struct device *dev) if (status < 0) return status; - acpi_dev_pm_attach(&client->dev, true); - status = driver->probe(client, i2c_match_id(driver->id_table, client)); - if (status) - acpi_dev_pm_detach(&client->dev, true); + status = dev_pm_domain_attach(&client->dev, true); + if (status != -EPROBE_DEFER) { + status = driver->probe(client, i2c_match_id(driver->id_table, + client)); + if (status) + dev_pm_domain_detach(&client->dev, true); + } return status; } @@ -302,7 +670,7 @@ static int i2c_device_remove(struct device *dev) status = driver->remove(client); } - acpi_dev_pm_detach(&client->dev, true); + dev_pm_domain_detach(&client->dev, true); return status; } |