4 files changed, 18 insertions, 2 deletions
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 89d78208de3f..78f148ea9d9f 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -20,6 +20,8 @@ config BMA180
 config BMA220
     tristate "Bosch BMA220 3-Axis Accelerometer Driver"
 	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
     help
       Say yes here to add support for the Bosch BMA220 triaxial
       acceleration sensor.
@@ -234,7 +236,8 @@ config STK8312
 config STK8BA50
 	tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
 	depends on I2C
-	depends on IIO_TRIGGER
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to get support for the Sensortek STK8BA50 3-axis
 	  accelerometer.
diff --git a/drivers/iio/accel/bma220_spi.c b/drivers/iio/accel/bma220_spi.c
index 1098d10df8e8..5099f295dd37 100644
--- a/drivers/iio/accel/bma220_spi.c
+++ b/drivers/iio/accel/bma220_spi.c
@@ -253,7 +253,7 @@ static int bma220_probe(struct spi_device *spi)
 	if (ret < 0)
 		return ret;
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+	ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
 					 bma220_trigger_handler, NULL);
 	if (ret < 0) {
 		dev_err(&spi->dev, "iio triggered buffer setup failed\n");
diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index bf17aae66145..59b380dbf27f 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -67,6 +67,9 @@
 #define BMC150_ACCEL_REG_PMU_BW		0x10
 #define BMC150_ACCEL_DEF_BW			125
 
+#define BMC150_ACCEL_REG_RESET			0x14
+#define BMC150_ACCEL_RESET_VAL			0xB6
+
 #define BMC150_ACCEL_REG_INT_MAP_0		0x19
 #define BMC150_ACCEL_INT_MAP_0_BIT_SLOPE	BIT(2)
 
@@ -1497,6 +1500,14 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
 	int ret, i;
 	unsigned int val;
 
+	/*
+	 * Reset chip to get it in a known good state. A delay of 1.8ms after
+	 * reset is required according to the data sheets of supported chips.
+	 */
+	regmap_write(data->regmap, BMC150_ACCEL_REG_RESET,
+		     BMC150_ACCEL_RESET_VAL);
+	usleep_range(1800, 2500);
+
 	ret = regmap_read(data->regmap, BMC150_ACCEL_REG_CHIP_ID, &val);
 	if (ret < 0) {
 		dev_err(dev, "Error: Reading chip id\n");
diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c
index 3a9f106787d2..9d72d4bcf5e9 100644
--- a/drivers/iio/accel/kxsd9.c
+++ b/drivers/iio/accel/kxsd9.c
@@ -160,11 +160,13 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev,
 		if (ret < 0)
 			goto error_ret;
 		*val = ret;
+		ret = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE:
 		ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));
 		if (ret < 0)
 			goto error_ret;
+		*val = 0;
 		*val2 = kxsd9_micro_scales[ret & KXSD9_FS_MASK];
 		ret = IIO_VAL_INT_PLUS_MICRO;
 		break;