diff options
Diffstat (limited to 'drivers/iio/adc/Kconfig')
| -rw-r--r-- | drivers/iio/adc/Kconfig | 112 |
1 files changed, 111 insertions, 1 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index ff5ad3be55b4..401f47b51d83 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -130,6 +130,17 @@ config AD799X To compile this driver as a module, choose M here: the module will be called ad799x. +config ASPEED_ADC + tristate "Aspeed ADC" + depends on ARCH_ASPEED || COMPILE_TEST + depends on COMMON_CLK + help + If you say yes here you get support for the ADC included in Aspeed + BMC SoCs. + + To compile this driver as a module, choose M here: the module will be + called aspeed_adc. + config AT91_ADC tristate "Atmel AT91 ADC" depends on ARCH_AT91 @@ -205,6 +216,17 @@ config CC10001_ADC This driver can also be built as a module. If so, the module will be called cc10001_adc. +config CPCAP_ADC + tristate "Motorola CPCAP PMIC ADC driver" + depends on MFD_CPCAP + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Motorola CPCAP PMIC ADC. + + This driver can also be built as a module. If so, the module will be + called cpcap-adc. + config DA9150_GPADC tristate "Dialog DA9150 GPADC driver support" depends on MFD_DA9150 @@ -328,6 +350,18 @@ config LPC18XX_ADC To compile this driver as a module, choose M here: the module will be called lpc18xx_adc. +config LPC32XX_ADC + tristate "NXP LPC32XX ADC" + depends on ARCH_LPC32XX || COMPILE_TEST + depends on HAS_IOMEM + help + Say yes here to build support for the integrated ADC inside the + LPC32XX SoC. Note that this feature uses the same hardware as the + touchscreen driver, so you should either select only one of the two + drivers (lpc32xx_adc or lpc32xx_ts) or, in the OpenFirmware case, + activate only one via device tree selection. Provides direct access + via sysfs. + config LTC2485 tristate "Linear Technology LTC2485 ADC driver" depends on I2C @@ -337,6 +371,16 @@ config LTC2485 To compile this driver as a module, choose M here: the module will be called ltc2485. +config LTC2497 + tristate "Linear Technology LTC2497 ADC driver" + depends on I2C + help + Say yes here to build support for Linear Technology LTC2497 + 16-Bit 8-/16-Channel Delta Sigma ADC. + + To compile this driver as a module, choose M here: the module will be + called ltc2497. + config MAX1027 tristate "Maxim max1027 ADC driver" depends on SPI @@ -358,6 +402,18 @@ config MAX11100 To compile this driver as a module, choose M here: the module will be called max11100. +config MAX1118 + tristate "Maxim max1117/max1118/max1119 ADCs driver" + depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Maxim max1117/max1118/max1119 + 8-bit, dual-channel ADCs. + + To compile this driver as a module, choose M here: the module will be + called max1118. + config MAX1363 tristate "Maxim max1363 ADC driver" depends on I2C @@ -377,6 +433,16 @@ config MAX1363 To compile this driver as a module, choose M here: the module will be called max1363. +config MAX9611 + tristate "Maxim max9611/max9612 ADC driver" + depends on I2C + help + Say yes here to build support for Maxim max9611/max9612 current sense + amplifier with 12-bits ADC interface. + + To compile this driver as a module, choose M here: the module will be + called max9611. + config MCP320X tristate "Microchip Technology MCP3x01/02/04/08" depends on SPI @@ -451,6 +517,20 @@ config PALMAS_GPADC is used in smartphones and tablets and supports a 16 channel general purpose ADC. +config QCOM_VADC_COMMON + tristate + +config QCOM_PM8XXX_XOADC + tristate "Qualcomm SSBI PM8xxx PMIC XOADCs" + depends on MFD_PM8XXX + select QCOM_VADC_COMMON + help + ADC driver for the XOADC portions of the Qualcomm PM8xxx PMICs + using SSBI transport: PM8018, PM8038, PM8058, PM8921. + + To compile this driver as a module, choose M here: the module + will be called qcom-pm8xxx-xoadc. + config QCOM_SPMI_IADC tristate "Qualcomm SPMI PMIC current ADC" depends on SPMI @@ -469,6 +549,7 @@ config QCOM_SPMI_VADC tristate "Qualcomm SPMI PMIC voltage ADC" depends on SPMI select REGMAP_SPMI + select QCOM_VADC_COMMON help This is the IIO Voltage ADC driver for Qualcomm QPNP VADC Chip. @@ -503,6 +584,17 @@ config ROCKCHIP_SARADC To compile this driver as a module, choose M here: the module will be called rockchip_saradc. +config SPEAR_ADC + tristate "ST SPEAr ADC" + depends on PLAT_SPEAR || COMPILE_TEST + depends on HAS_IOMEM + help + Say yes here to build support for the integrated ADC inside the + ST SPEAr SoC. Provides direct access via sysfs. + + To compile this driver as a module, choose M here: the + module will be called spear_adc. + config STM32_ADC_CORE tristate "STMicroelectronics STM32 adc core" depends on ARCH_STM32 || COMPILE_TEST @@ -532,7 +624,7 @@ config STM32_ADC config STX104 tristate "Apex Embedded Systems STX104 driver" - depends on X86 && ISA_BUS_API + depends on PC104 && X86 && ISA_BUS_API select GPIOLIB help Say yes here to build support for the Apex Embedded Systems STX104 @@ -545,6 +637,24 @@ config STX104 The base port addresses for the devices may be configured via the base array module parameter. +config SUN4I_GPADC + tristate "Support for the Allwinner SoCs GPADC" + depends on IIO + depends on MFD_SUN4I_GPADC || MACH_SUN8I + depends on THERMAL || !THERMAL_OF + help + Say yes here to build support for Allwinner (A10, A13 and A31) SoCs + GPADC. This ADC provides 4 channels which can be used as an ADC or as + a touchscreen input and one channel for thermal sensor. + + The thermal sensor slows down ADC readings and can be disabled by + disabling CONFIG_THERMAL_OF. However, the thermal sensor should be + enabled by default since the SoC temperature is usually more critical + than ADC readings. + + To compile this driver as a module, choose M here: the module will be + called sun4i-gpadc-iio. + config TI_ADC081C tristate "Texas Instruments ADC081C/ADC101C/ADC121C family" depends on I2C |