diff options
Diffstat (limited to 'drivers/media')
115 files changed, 18589 insertions, 5840 deletions
diff --git a/drivers/media/common/ir-common.c b/drivers/media/common/ir-common.c index 31fccb4f05d6..4b71fd6f7aed 100644 --- a/drivers/media/common/ir-common.c +++ b/drivers/media/common/ir-common.c @@ -116,7 +116,7 @@ IR_KEYTAB_TYPE ir_codes_winfast[IR_KEYTAB_SIZE] = { [ 46 ] = KEY_BLUE, [ 24 ] = KEY_KPPLUS, /* fine tune + */ [ 25 ] = KEY_KPMINUS, /* fine tune - */ - [ 33 ] = KEY_KPDOT, + [ 33 ] = KEY_KPDOT, [ 19 ] = KEY_KPENTER, [ 34 ] = KEY_BACK, [ 35 ] = KEY_PLAYPAUSE, @@ -239,7 +239,7 @@ static void ir_input_key_event(struct input_dev *dev, struct ir_input_state *ir) dprintk(1,"%s: key event code=%d down=%d\n", dev->name,ir->keycode,ir->keypressed); input_report_key(dev,ir->keycode,ir->keypressed); - input_sync(dev); + input_sync(dev); } /* -------------------------------------------------------------------------- */ diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index 47e28b0ee951..a35330315f65 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -13,6 +13,8 @@ #include "bcm3510.h" #include "stv0297.h" #include "mt312.h" +#include "lgdt330x.h" +#include "dvb-pll.h" /* lnb control */ @@ -234,7 +236,6 @@ static struct stv0299_config samsung_tbmu24112_config = { .inittab = samsung_tbmu24112_inittab, .mclk = 88000000UL, .invert = 0, - .enhanced_tuning = 0, .skip_reinit = 0, .lock_output = STV0229_LOCKOUTPUT_LK, .volt13_op0_op1 = STV0299_VOLT13_OP1, @@ -296,6 +297,52 @@ static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct fir return request_firmware(fw, name, fc->dev); } +static int lgdt3303_pll_set(struct dvb_frontend* fe, + struct dvb_frontend_parameters* params) +{ + struct flexcop_device *fc = fe->dvb->priv; + u8 buf[4]; + struct i2c_msg msg = + { .addr = 0x61, .flags = 0, .buf = buf, .len = 4 }; + int err; + + dvb_pll_configure(&dvb_pll_tdvs_tua6034,buf, params->frequency, 0); + dprintk(1, "%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n", + __FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]); + if ((err = i2c_transfer(&fc->i2c_adap, &msg, 1)) != 1) { + printk(KERN_WARNING "lgdt3303: %s error " + "(addr %02x <- %02x, err = %i)\n", + __FUNCTION__, buf[0], buf[1], err); + if (err < 0) + return err; + else + return -EREMOTEIO; + } + + buf[0] = 0x86 | 0x18; + buf[1] = 0x50; + msg.len = 2; + if ((err = i2c_transfer(&fc->i2c_adap, &msg, 1)) != 1) { + printk(KERN_WARNING "lgdt3303: %s error " + "(addr %02x <- %02x, err = %i)\n", + __FUNCTION__, buf[0], buf[1], err); + if (err < 0) + return err; + else + return -EREMOTEIO; + } + + return 0; +} + +static struct lgdt330x_config air2pc_atsc_hd5000_config = { + .demod_address = 0x59, + .demod_chip = LGDT3303, + .serial_mpeg = 0x04, + .pll_set = lgdt3303_pll_set, + .clock_polarity_flip = 1, +}; + static struct nxt2002_config samsung_tbmv_config = { .demod_address = 0x0a, .request_firmware = flexcop_fe_request_firmware, @@ -458,6 +505,11 @@ int flexcop_frontend_init(struct flexcop_device *fc) fc->dev_type = FC_AIR_ATSC2; info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address); } else + /* try the air atsc 3nd generation (lgdt3303) */ + if ((fc->fe = lgdt330x_attach(&air2pc_atsc_hd5000_config, &fc->i2c_adap)) != NULL) { + fc->dev_type = FC_AIR_ATSC3; + info("found the lgdt3303 at i2c address: 0x%02x",air2pc_atsc_hd5000_config.demod_address); + } else /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */ if ((fc->fe = bcm3510_attach(&air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) { fc->dev_type = FC_AIR_ATSC1; diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c index 3a08d38b318a..62282d8dbfa8 100644 --- a/drivers/media/dvb/b2c2/flexcop-misc.c +++ b/drivers/media/dvb/b2c2/flexcop-misc.c @@ -51,6 +51,7 @@ const char *flexcop_device_names[] = { "Sky2PC/SkyStar 2 DVB-S", "Sky2PC/SkyStar 2 DVB-S (old version)", "Cable2PC/CableStar 2 DVB-C", + "Air2PC/AirStar 2 ATSC 3rd generation (HD5000)", }; const char *flexcop_bus_names[] = { diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h index 4ae1eb5bfe98..23cc6431e2b8 100644 --- a/drivers/media/dvb/b2c2/flexcop-reg.h +++ b/drivers/media/dvb/b2c2/flexcop-reg.h @@ -26,6 +26,7 @@ typedef enum { FC_SKY, FC_SKY_OLD, FC_CABLE, + FC_AIR_ATSC3, } flexcop_device_type_t; typedef enum { diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c index 12873d435406..123ed96f6faa 100644 --- a/drivers/media/dvb/b2c2/flexcop.c +++ b/drivers/media/dvb/b2c2/flexcop.c @@ -193,6 +193,7 @@ static void flexcop_reset(struct flexcop_device *fc) v204 = fc->read_ibi_reg(fc,misc_204); v204.misc_204.Per_reset_sig = 0; fc->write_ibi_reg(fc,misc_204,v204); + msleep(1); v204.misc_204.Per_reset_sig = 1; fc->write_ibi_reg(fc,misc_204,v204); } diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig index 1e85d16491b0..2337b41714e0 100644 --- a/drivers/media/dvb/bt8xx/Kconfig +++ b/drivers/media/dvb/bt8xx/Kconfig @@ -6,10 +6,12 @@ config DVB_BT8XX select DVB_NXT6000 select DVB_CX24110 select DVB_OR51211 + select DVB_LGDT330X help Support for PCI cards based on the Bt8xx PCI bridge. Examples are the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards, - the pcHDTV HD2000 cards, and certain AVerMedia cards. + the pcHDTV HD2000 cards, the DViCO FusionHDTV Lite cards, and + some AVerMedia cards. Since these cards have no MPEG decoder onboard, they transmit only compressed MPEG data over the PCI bus, so you need diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c index b3c9d7327ac1..8977c7a313df 100644 --- a/drivers/media/dvb/bt8xx/dst.c +++ b/drivers/media/dvb/bt8xx/dst.c @@ -690,8 +690,8 @@ struct dst_types dst_tlist[] = { .device_id = "DTT-CI", .offset = 1, .dst_type = DST_TYPE_IS_TERR, - .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_FW_2, - .dst_feature = 0 + .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_MULTI_FE, + .dst_feature = DST_TYPE_HAS_CA }, { @@ -796,6 +796,56 @@ static int dst_get_vendor(struct dst_state *state) return 0; } +static int dst_get_tuner_info(struct dst_state *state) +{ + u8 get_tuner_1[] = { 0x00, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + u8 get_tuner_2[] = { 0x00, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + + get_tuner_1[7] = dst_check_sum(get_tuner_1, 7); + get_tuner_2[7] = dst_check_sum(get_tuner_2, 7); + if (state->type_flags & DST_TYPE_HAS_MULTI_FE) { + if (dst_command(state, get_tuner_2, 8) < 0) { + dprintk(verbose, DST_INFO, 1, "Unsupported Command"); + return -1; + } + } else { + if (dst_command(state, get_tuner_1, 8) < 0) { + dprintk(verbose, DST_INFO, 1, "Unsupported Command"); + return -1; + } + } + memset(&state->board_info, '\0', 8); + memcpy(&state->board_info, &state->rxbuffer, 8); + if (state->type_flags & DST_TYPE_HAS_MULTI_FE) { + if (state->board_info[1] == 0x0b) { + if (state->type_flags & DST_TYPE_HAS_TS204) + state->type_flags &= ~DST_TYPE_HAS_TS204; + state->type_flags |= DST_TYPE_HAS_NEWTUNE; + dprintk(verbose, DST_INFO, 1, "DST type has TS=188"); + } else { + if (state->type_flags & DST_TYPE_HAS_NEWTUNE) + state->type_flags &= ~DST_TYPE_HAS_NEWTUNE; + state->type_flags |= DST_TYPE_HAS_TS204; + dprintk(verbose, DST_INFO, 1, "DST type has TS=204"); + } + } else { + if (state->board_info[0] == 0xbc) { + if (state->type_flags & DST_TYPE_HAS_TS204) + state->type_flags &= ~DST_TYPE_HAS_TS204; + state->type_flags |= DST_TYPE_HAS_NEWTUNE; + dprintk(verbose, DST_INFO, 1, "DST type has TS=188, Daughterboard=[%d]", state->board_info[1]); + + } else if (state->board_info[0] == 0xcc) { + if (state->type_flags & DST_TYPE_HAS_NEWTUNE) + state->type_flags &= ~DST_TYPE_HAS_NEWTUNE; + state->type_flags |= DST_TYPE_HAS_TS204; + dprintk(verbose, DST_INFO, 1, "DST type has TS=204 Daughterboard=[%d]", state->board_info[1]); + } + } + + return 0; +} + static int dst_get_device_id(struct dst_state *state) { u8 reply; @@ -855,15 +905,12 @@ static int dst_get_device_id(struct dst_state *state) state->dst_type = use_dst_type; dst_type_flags_print(state->type_flags); - if (state->type_flags & DST_TYPE_HAS_TS204) { - dst_packsize(state, 204); - } - return 0; } static int dst_probe(struct dst_state *state) { + sema_init(&state->dst_mutex, 1); if ((rdc_8820_reset(state)) < 0) { dprintk(verbose, DST_ERROR, 1, "RDC 8820 RESET Failed."); return -1; @@ -886,6 +933,13 @@ static int dst_probe(struct dst_state *state) dprintk(verbose, DST_INFO, 1, "MAC: Unsupported command"); return 0; } + if ((state->type_flags & DST_TYPE_HAS_MULTI_FE) || (state->type_flags & DST_TYPE_HAS_FW_BUILD)) { + if (dst_get_tuner_info(state) < 0) + dprintk(verbose, DST_INFO, 1, "Tuner: Unsupported command"); + } + if (state->type_flags & DST_TYPE_HAS_TS204) { + dst_packsize(state, 204); + } if (state->type_flags & DST_TYPE_HAS_FW_BUILD) { if (dst_fw_ver(state) < 0) { dprintk(verbose, DST_INFO, 1, "FW: Unsupported command"); @@ -907,21 +961,23 @@ static int dst_probe(struct dst_state *state) int dst_command(struct dst_state *state, u8 *data, u8 len) { u8 reply; + + down(&state->dst_mutex); if ((dst_comm_init(state)) < 0) { dprintk(verbose, DST_NOTICE, 1, "DST Communication Initialization Failed."); - return -1; + goto error; } if (write_dst(state, data, len)) { dprintk(verbose, DST_INFO, 1, "Tring to recover.. "); if ((dst_error_recovery(state)) < 0) { dprintk(verbose, DST_ERROR, 1, "Recovery Failed."); - return -1; + goto error; } - return -1; + goto error; } if ((dst_pio_disable(state)) < 0) { dprintk(verbose, DST_ERROR, 1, "PIO Disable Failed."); - return -1; + goto error; } if (state->type_flags & DST_TYPE_HAS_FW_1) udelay(3000); @@ -929,36 +985,41 @@ int dst_command(struct dst_state *state, u8 *data, u8 len) dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. "); if ((dst_error_recovery(state)) < 0) { dprintk(verbose, DST_INFO, 1, "Recovery Failed."); - return -1; + goto error; } - return -1; + goto error; } if (reply != ACK) { dprintk(verbose, DST_INFO, 1, "write not acknowledged 0x%02x ", reply); - return -1; + goto error; } if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3)) - return 0; + goto error; if (state->type_flags & DST_TYPE_HAS_FW_1) udelay(3000); else udelay(2000); if (!dst_wait_dst_ready(state, NO_DELAY)) - return -1; + goto error; if (read_dst(state, state->rxbuffer, FIXED_COMM)) { dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. "); if ((dst_error_recovery(state)) < 0) { dprintk(verbose, DST_INFO, 1, "Recovery failed."); - return -1; + goto error; } - return -1; + goto error; } if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) { dprintk(verbose, DST_INFO, 1, "checksum failure"); - return -1; + goto error; } - + up(&state->dst_mutex); return 0; + +error: + up(&state->dst_mutex); + return -EIO; + } EXPORT_SYMBOL(dst_command); @@ -1016,7 +1077,7 @@ static int dst_get_tuna(struct dst_state *state) return 0; state->diseq_flags &= ~(HAS_LOCK); if (!dst_wait_dst_ready(state, NO_DELAY)) - return 0; + return -EIO; if (state->type_flags & DST_TYPE_HAS_NEWTUNE) /* how to get variable length reply ???? */ retval = read_dst(state, state->rx_tuna, 10); @@ -1024,22 +1085,27 @@ static int dst_get_tuna(struct dst_state *state) retval = read_dst(state, &state->rx_tuna[2], FIXED_COMM); if (retval < 0) { dprintk(verbose, DST_DEBUG, 1, "read not successful"); - return 0; + return retval; } if (state->type_flags & DST_TYPE_HAS_NEWTUNE) { if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) { dprintk(verbose, DST_INFO, 1, "checksum failure ? "); - return 0; + return -EIO; } } else { if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[2], 7)) { dprintk(verbose, DST_INFO, 1, "checksum failure? "); - return 0; + return -EIO; } } if (state->rx_tuna[2] == 0 && state->rx_tuna[3] == 0) return 0; - state->decode_freq = ((state->rx_tuna[2] & 0x7f) << 8) + state->rx_tuna[3]; + if (state->dst_type == DST_TYPE_IS_SAT) { + state->decode_freq = ((state->rx_tuna[2] & 0x7f) << 8) + state->rx_tuna[3]; + } else { + state->decode_freq = ((state->rx_tuna[2] & 0x7f) << 16) + (state->rx_tuna[3] << 8) + state->rx_tuna[4]; + } + state->decode_freq = state->decode_freq * 1000; state->decode_lock = 1; state->diseq_flags |= HAS_LOCK; @@ -1062,10 +1128,10 @@ static int dst_write_tuna(struct dvb_frontend *fe) dst_set_voltage(fe, SEC_VOLTAGE_13); } state->diseq_flags &= ~(HAS_LOCK | ATTEMPT_TUNE); - + down(&state->dst_mutex); if ((dst_comm_init(state)) < 0) { dprintk(verbose, DST_DEBUG, 1, "DST Communication initialization failed."); - return -1; + goto error; } if (state->type_flags & DST_TYPE_HAS_NEWTUNE) { state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[0], 9); @@ -1077,23 +1143,29 @@ static int dst_write_tuna(struct dvb_frontend *fe) if (retval < 0) { dst_pio_disable(state); dprintk(verbose, DST_DEBUG, 1, "write not successful"); - return retval; + goto werr; } if ((dst_pio_disable(state)) < 0) { dprintk(verbose, DST_DEBUG, 1, "DST PIO disable failed !"); - return -1; + goto error; } if ((read_dst(state, &reply, GET_ACK) < 0)) { dprintk(verbose, DST_DEBUG, 1, "read verify not successful."); - return -1; + goto error; } if (reply != ACK) { dprintk(verbose, DST_DEBUG, 1, "write not acknowledged 0x%02x ", reply); - return 0; + goto error; } state->diseq_flags |= ATTEMPT_TUNE; - - return dst_get_tuna(state); + retval = dst_get_tuna(state); +werr: + up(&state->dst_mutex); + return retval; + +error: + up(&state->dst_mutex); + return -EIO; } /* diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c index 6776a592045f..e6541aff3996 100644 --- a/drivers/media/dvb/bt8xx/dst_ca.c +++ b/drivers/media/dvb/bt8xx/dst_ca.c @@ -69,62 +69,53 @@ static int ca_set_pid(void) } -static int put_checksum(u8 *check_string, int length) +static void put_checksum(u8 *check_string, int length) { - u8 i = 0, checksum = 0; - - dprintk(verbose, DST_CA_DEBUG, 1, " ========================= Checksum calculation ==========================="); - dprintk(verbose, DST_CA_DEBUG, 1, " String Length=[0x%02x]", length); - dprintk(verbose, DST_CA_DEBUG, 1, " String=["); - - while (i < length) { - dprintk(verbose, DST_CA_DEBUG, 0, " %02x", check_string[i]); - checksum += check_string[i]; - i++; - } - dprintk(verbose, DST_CA_DEBUG, 0, " ]\n"); - dprintk(verbose, DST_CA_DEBUG, 1, "Sum=[%02x]\n", checksum); - check_string[length] = ~checksum + 1; - dprintk(verbose, DST_CA_DEBUG, 1, " Checksum=[%02x]", check_string[length]); - dprintk(verbose, DST_CA_DEBUG, 1, " =========================================================================="); - - return 0; + dprintk(verbose, DST_CA_DEBUG, 1, " Computing string checksum."); + dprintk(verbose, DST_CA_DEBUG, 1, " -> string length : 0x%02x", length); + check_string[length] = dst_check_sum (check_string, length); + dprintk(verbose, DST_CA_DEBUG, 1, " -> checksum : 0x%02x", check_string[length]); } static int dst_ci_command(struct dst_state* state, u8 * data, u8 *ca_string, u8 len, int read) { u8 reply; + down(&state->dst_mutex); dst_comm_init(state); msleep(65); if (write_dst(state, data, len)) { dprintk(verbose, DST_CA_INFO, 1, " Write not successful, trying to recover"); dst_error_recovery(state); - return -1; + goto error; } if ((dst_pio_disable(state)) < 0) { dprintk(verbose, DST_CA_ERROR, 1, " DST PIO disable failed."); - return -1; + goto error; } if (read_dst(state, &reply, GET_ACK) < 0) { dprintk(verbose, DST_CA_INFO, 1, " Read not successful, trying to recover"); dst_error_recovery(state); - return -1; + goto error; } if (read) { if (! dst_wait_dst_ready(state, LONG_DELAY)) { dprintk(verbose, DST_CA_NOTICE, 1, " 8820 not ready"); - return -1; + goto error; } if (read_dst(state, ca_string, 128) < 0) { /* Try to make this dynamic */ dprintk(verbose, DST_CA_INFO, 1, " Read not successful, trying to recover"); dst_error_recovery(state); - return -1; + goto error; } } - + up(&state->dst_mutex); return 0; + +error: + up(&state->dst_mutex); + return -EIO; } @@ -166,7 +157,7 @@ static int ca_get_app_info(struct dst_state *state) return 0; } -static int ca_get_slot_caps(struct dst_state *state, struct ca_caps *p_ca_caps, void *arg) +static int ca_get_slot_caps(struct dst_state *state, struct ca_caps *p_ca_caps, void __user *arg) { int i; u8 slot_cap[256]; @@ -192,25 +183,25 @@ static int ca_get_slot_caps(struct dst_state *state, struct ca_caps *p_ca_caps, p_ca_caps->descr_num = slot_cap[7]; p_ca_caps->descr_type = 1; - if (copy_to_user((struct ca_caps *)arg, p_ca_caps, sizeof (struct ca_caps))) + if (copy_to_user(arg, p_ca_caps, sizeof (struct ca_caps))) return -EFAULT; return 0; } /* Need some more work */ -static int ca_get_slot_descr(struct dst_state *state, struct ca_msg *p_ca_message, void *arg) +static int ca_get_slot_descr(struct dst_state *state, struct ca_msg *p_ca_message, void __user *arg) { return -EOPNOTSUPP; } -static int ca_get_slot_info(struct dst_state *state, struct ca_slot_info *p_ca_slot_info, void *arg) +static int ca_get_slot_info(struct dst_state *state, struct ca_slot_info *p_ca_slot_info, void __user *arg) { int i; static u8 slot_command[8] = {0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff}; - u8 *slot_info = state->rxbuffer; + u8 *slot_info = state->messages; put_checksum(&slot_command[0], 7); if ((dst_put_ci(state, slot_command, sizeof (slot_command), slot_info, GET_REPLY)) < 0) { @@ -238,19 +229,19 @@ static int ca_get_slot_info(struct dst_state *state, struct ca_slot_info *p_ca_s } else p_ca_slot_info->flags = 0; - if (copy_to_user((struct ca_slot_info *)arg, p_ca_slot_info, sizeof (struct ca_slot_info))) + if (copy_to_user(arg, p_ca_slot_info, sizeof (struct ca_slot_info))) return -EFAULT; return 0; } -static int ca_get_message(struct dst_state *state, struct ca_msg *p_ca_message, void *arg) +static int ca_get_message(struct dst_state *state, struct ca_msg *p_ca_message, void __user *arg) { u8 i = 0; u32 command = 0; - if (copy_from_user(p_ca_message, (void *)arg, sizeof (struct ca_msg))) + if (copy_from_user(p_ca_message, arg, sizeof (struct ca_msg))) return -EFAULT; if (p_ca_message->msg) { @@ -266,7 +257,7 @@ static int ca_get_message(struct dst_state *state, struct ca_msg *p_ca_message, switch (command) { case CA_APP_INFO: memcpy(p_ca_message->msg, state->messages, 128); - if (copy_to_user((void *)arg, p_ca_message, sizeof (struct ca_msg)) ) + if (copy_to_user(arg, p_ca_message, sizeof (struct ca_msg)) ) return -EFAULT; break; } @@ -315,7 +306,7 @@ static int write_to_8820(struct dst_state *state, struct ca_msg *hw_buffer, u8 l return 0; } -u32 asn_1_decode(u8 *asn_1_array) +static u32 asn_1_decode(u8 *asn_1_array) { u8 length_field = 0, word_count = 0, count = 0; u32 length = 0; @@ -328,7 +319,8 @@ u32 asn_1_decode(u8 *asn_1_array) } else { word_count = length_field & 0x7f; for (count = 0; count < word_count; count++) { - length = (length | asn_1_array[count + 1]) << 8; + length = length << 8; + length += asn_1_array[count + 1]; dprintk(verbose, DST_CA_DEBUG, 1, " Length=[%04x]", length); } } @@ -399,13 +391,14 @@ static int dst_check_ca_pmt(struct dst_state *state, struct ca_msg *p_ca_message return 0; } -static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, void *arg) +static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, void __user *arg) { int i = 0; unsigned int ca_message_header_len; u32 command = 0; struct ca_msg *hw_buffer; + int result = 0; if ((hw_buffer = (struct ca_msg *) kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) { dprintk(verbose, DST_CA_ERROR, 1, " Memory allocation failure"); @@ -413,8 +406,11 @@ static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, } dprintk(verbose, DST_CA_DEBUG, 1, " "); - if (copy_from_user(p_ca_message, (void *)arg, sizeof (struct ca_msg))) - return -EFAULT; + if (copy_from_user(p_ca_message, (void *)arg, sizeof (struct ca_msg))) { + result = -EFAULT; + goto free_mem_and_exit; + } + if (p_ca_message->msg) { ca_message_header_len = p_ca_message->length; /* Restore it back when you are done */ @@ -433,7 +429,8 @@ static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, dprintk(verbose, DST_CA_DEBUG, 1, "Command = SEND_CA_PMT"); if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, 0)) < 0) { // code simplification started dprintk(verbose, DST_CA_ERROR, 1, " -->CA_PMT Failed !"); - return -1; + result = -1; + goto free_mem_and_exit; } dprintk(verbose, DST_CA_INFO, 1, " -->CA_PMT Success !"); break; @@ -442,7 +439,8 @@ static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, /* Have to handle the 2 basic types of cards here */ if ((dst_check_ca_pmt(state, p_ca_message, hw_buffer)) < 0) { dprintk(verbose, DST_CA_ERROR, 1, " -->CA_PMT_REPLY Failed !"); - return -1; + result = -1; + goto free_mem_and_exit; } dprintk(verbose, DST_CA_INFO, 1, " -->CA_PMT_REPLY Success !"); break; @@ -451,22 +449,28 @@ static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, if ((ca_get_app_info(state)) < 0) { dprintk(verbose, DST_CA_ERROR, 1, " -->CA_APP_INFO_ENQUIRY Failed !"); - return -1; + result = -1; + goto free_mem_and_exit; } dprintk(verbose, DST_CA_INFO, 1, " -->CA_APP_INFO_ENQUIRY Success !"); break; } } - return 0; +free_mem_and_exit: + kfree (hw_buffer); + + return result; } -static int dst_ca_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) +static int dst_ca_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long ioctl_arg) { struct dvb_device* dvbdev = (struct dvb_device*) file->private_data; struct dst_state* state = (struct dst_state*) dvbdev->priv; struct ca_slot_info *p_ca_slot_info; struct ca_caps *p_ca_caps; struct ca_msg *p_ca_message; + void __user *arg = (void __user *)ioctl_arg; + int result = 0; if ((p_ca_message = (struct ca_msg *) kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) { dprintk(verbose, DST_CA_ERROR, 1, " Memory allocation failure"); @@ -486,14 +490,16 @@ static int dst_ca_ioctl(struct inode *inode, struct file *file, unsigned int cmd dprintk(verbose, DST_CA_INFO, 1, " Sending message"); if ((ca_send_message(state, p_ca_message, arg)) < 0) { dprintk(verbose, DST_CA_ERROR, 1, " -->CA_SEND_MSG Failed !"); - return -1; + result = -1; + goto free_mem_and_exit; } break; case CA_GET_MSG: dprintk(verbose, DST_CA_INFO, 1, " Getting message"); if ((ca_get_message(state, p_ca_message, arg)) < 0) { dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_MSG Failed !"); - return -1; + result = -1; + goto free_mem_and_exit; } dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_MSG Success !"); break; @@ -506,7 +512,8 @@ static int dst_ca_ioctl(struct inode *inode, struct file *file, unsigned int cmd dprintk(verbose, DST_CA_INFO, 1, " Getting Slot info"); if ((ca_get_slot_info(state, p_ca_slot_info, arg)) < 0) { dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_SLOT_INFO Failed !"); - return -1; + result = -1; + goto free_mem_and_exit; } dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_SLOT_INFO Success !"); break; @@ -514,7 +521,8 @@ static int dst_ca_ioctl(struct inode *inode, struct file *file, unsigned int cmd dprintk(verbose, DST_CA_INFO, 1, " Getting Slot capabilities"); if ((ca_get_slot_caps(state, p_ca_caps, arg)) < 0) { dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_CAP Failed !"); - return -1; + result = -1; + goto free_mem_and_exit; } dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_CAP Success !"); break; @@ -522,7 +530,8 @@ static int dst_ca_ioctl(struct inode *inode, struct file *file, unsigned int cmd dprintk(verbose, DST_CA_INFO, 1, " Getting descrambler description"); if ((ca_get_slot_descr(state, p_ca_message, arg)) < 0) { dprintk(verbose, DST_CA_ERROR, 1, " -->CA_GET_DESCR_INFO Failed !"); - return -1; + result = -1; + goto free_mem_and_exit; } dprintk(verbose, DST_CA_INFO, 1, " -->CA_GET_DESCR_INFO Success !"); break; @@ -530,7 +539,8 @@ static int dst_ca_ioctl(struct inode *inode, struct file *file, unsigned int cmd dprintk(verbose, DST_CA_INFO, 1, " Setting descrambler"); if ((ca_set_slot_descr()) < 0) { dprintk(verbose, DST_CA_ERROR, 1, " -->CA_SET_DESCR Failed !"); - return -1; + result = -1; + goto free_mem_and_exit; } dprintk(verbose, DST_CA_INFO, 1, " -->CA_SET_DESCR Success !"); break; @@ -538,14 +548,19 @@ static int dst_ca_ioctl(struct inode *inode, struct file *file, unsigned int cmd dprintk(verbose, DST_CA_INFO, 1, " Setting PID"); if ((ca_set_pid()) < 0) { dprintk(verbose, DST_CA_ERROR, 1, " -->CA_SET_PID Failed !"); - return -1; + result = -1; + goto free_mem_and_exit; } dprintk(verbose, DST_CA_INFO, 1, " -->CA_SET_PID Success !"); default: - return -EOPNOTSUPP; + result = -EOPNOTSUPP; }; + free_mem_and_exit: + kfree (p_ca_message); + kfree (p_ca_slot_info); + kfree (p_ca_caps); - return 0; + return result; } static int dst_ca_open(struct inode *inode, struct file *file) @@ -582,7 +597,7 @@ static int dst_ca_write(struct file *file, const char __user *buffer, size_t len static struct file_operations dst_ca_fops = { .owner = THIS_MODULE, - .ioctl = (void *)dst_ca_ioctl, + .ioctl = dst_ca_ioctl, .open = dst_ca_open, .release = dst_ca_release, .read = dst_ca_read, diff --git a/drivers/media/dvb/bt8xx/dst_common.h b/drivers/media/dvb/bt8xx/dst_common.h index 3281a6ca3685..81557f38fe38 100644 --- a/drivers/media/dvb/bt8xx/dst_common.h +++ b/drivers/media/dvb/bt8xx/dst_common.h @@ -22,6 +22,7 @@ #ifndef DST_COMMON_H #define DST_COMMON_H +#include <linux/smp_lock.h> #include <linux/dvb/frontend.h> #include <linux/device.h> #include "bt878.h" @@ -49,6 +50,7 @@ #define DST_TYPE_HAS_FW_BUILD 64 #define DST_TYPE_HAS_OBS_REGS 128 #define DST_TYPE_HAS_INC_COUNT 256 +#define DST_TYPE_HAS_MULTI_FE 512 /* Card capability list */ @@ -117,6 +119,9 @@ struct dst_state { u8 fw_version[8]; u8 card_info[8]; u8 vendor[8]; + u8 board_info[8]; + + struct semaphore dst_mutex; }; struct dst_types { diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c index c5c7672cd538..2e398090cf63 100644 --- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c +++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c @@ -34,6 +34,7 @@ #include "dvb_frontend.h" #include "dvb-bt8xx.h" #include "bt878.h" +#include "dvb-pll.h" static int debug; @@ -279,7 +280,7 @@ static int microtune_mt7202dtf_pll_set(struct dvb_frontend* fe, struct dvb_front data[0] = (div >> 8) & 0x7f; data[1] = div & 0xff; data[2] = ((div >> 10) & 0x60) | cfg; - data[3] = cpump | band_select; + data[3] = (cpump << 6) | band_select; i2c_transfer(card->i2c_adapter, &msg, 1); return (div * 166666 - 36000000); @@ -522,9 +523,7 @@ static void digitv_alps_tded4_reset(struct dvb_bt8xx_card *bt) /* * Reset the frontend, must be called before trying * to initialise the MT352 or mt352_attach - * will fail. - * - * Presumably not required for the NXT6000 frontend. + * will fail. Same goes for the nxt6000 frontend. * */ @@ -546,14 +545,63 @@ static struct mt352_config digitv_alps_tded4_config = { .pll_set = digitv_alps_tded4_pll_set, }; +static int tdvs_tua6034_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) +{ + struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv; + u8 buf[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; + int err; + + dvb_pll_configure(&dvb_pll_tdvs_tua6034, buf, params->frequency, 0); + dprintk("%s: tuner at 0x%02x bytes: 0x%02x 0x%02x 0x%02x 0x%02x\n", + __FUNCTION__, msg.addr, buf[0],buf[1],buf[2],buf[3]); + if ((err = i2c_transfer(card->i2c_adapter, &msg, 1)) != 1) { + printk(KERN_WARNING "dvb-bt8xx: %s error " + "(addr %02x <- %02x, err = %i)\n", + __FUNCTION__, buf[0], buf[1], err); + if (err < 0) + return err; + else + return -EREMOTEIO; + } + + /* Set the Auxiliary Byte. */ + buf[2] &= ~0x20; + buf[2] |= 0x18; + buf[3] = 0x50; + i2c_transfer(card->i2c_adapter, &msg, 1); + + return 0; +} + +static struct lgdt330x_config tdvs_tua6034_config = { + .demod_address = 0x0e, + .demod_chip = LGDT3303, + .serial_mpeg = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */ + .pll_set = tdvs_tua6034_pll_set, +}; + +static void lgdt330x_reset(struct dvb_bt8xx_card *bt) +{ + /* Set pin 27 of the lgdt3303 chip high to reset the frontend */ + + /* Pulse the reset line */ + bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */ + bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000000); /* Low */ + msleep(100); + + bttv_write_gpio(bt->bttv_nr, 0x00e00007, 0x00000001); /* High */ + msleep(100); +} + static void frontend_init(struct dvb_bt8xx_card *card, u32 type) { int ret; struct dst_state* state = NULL; switch(type) { -#ifdef BTTV_DVICO_DVBT_LITE - case BTTV_DVICO_DVBT_LITE: +#ifdef BTTV_BOARD_DVICO_DVBT_LITE + case BTTV_BOARD_DVICO_DVBT_LITE: card->fe = mt352_attach(&thomson_dtt7579_config, card->i2c_adapter); if (card->fe != NULL) { card->fe->ops->info.frequency_min = 174000000; @@ -562,10 +610,19 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) break; #endif -#ifdef BTTV_TWINHAN_VP3021 - case BTTV_TWINHAN_VP3021: +#ifdef BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE + case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE: + lgdt330x_reset(card); + card->fe = lgdt330x_attach(&tdvs_tua6034_config, card->i2c_adapter); + if (card->fe != NULL) + dprintk ("dvb_bt8xx: lgdt330x detected\n"); + break; +#endif + +#ifdef BTTV_BOARD_TWINHAN_VP3021 + case BTTV_BOARD_TWINHAN_VP3021: #else - case BTTV_NEBULA_DIGITV: + case BTTV_BOARD_NEBULA_DIGITV: #endif /* * It is possible to determine the correct frontend using the I2C bus (see the Nebula SDK); @@ -573,6 +630,7 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) */ /* Old Nebula (marked (c)2003 on high profile pci card) has nxt6000 demod */ + digitv_alps_tded4_reset(card); card->fe = nxt6000_attach(&vp3021_alps_tded4_config, card->i2c_adapter); if (card->fe != NULL) { dprintk ("dvb_bt8xx: an nxt6000 was detected on your digitv card\n"); @@ -587,11 +645,11 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) dprintk ("dvb_bt8xx: an mt352 was detected on your digitv card\n"); break; - case BTTV_AVDVBT_761: + case BTTV_BOARD_AVDVBT_761: card->fe = sp887x_attach(µtune_mt7202dtf_config, card->i2c_adapter); break; - case BTTV_AVDVBT_771: + case BTTV_BOARD_AVDVBT_771: card->fe = mt352_attach(&advbt771_samsung_tdtc9251dh0_config, card->i2c_adapter); if (card->fe != NULL) { card->fe->ops->info.frequency_min = 174000000; @@ -599,7 +657,7 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) } break; - case BTTV_TWINHAN_DST: + case BTTV_BOARD_TWINHAN_DST: /* DST is not a frontend driver !!! */ state = (struct dst_state *) kmalloc(sizeof (struct dst_state), GFP_KERNEL); /* Setup the Card */ @@ -620,11 +678,11 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) ret = dst_ca_attach(state, &card->dvb_adapter); break; - case BTTV_PINNACLESAT: + case BTTV_BOARD_PINNACLESAT: card->fe = cx24110_attach(&pctvsat_config, card->i2c_adapter); break; - case BTTV_PC_HDTV: + case BTTV_BOARD_PC_HDTV: card->fe = or51211_attach(&or51211_config, card->i2c_adapter); break; } @@ -746,7 +804,7 @@ static int dvb_bt8xx_probe(struct device *dev) card->i2c_adapter = &sub->core->i2c_adap; switch(sub->core->type) { - case BTTV_PINNACLESAT: + case BTTV_BOARD_PINNACLESAT: card->gpio_mode = 0x0400c060; /* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR, BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */ @@ -754,8 +812,8 @@ static int dvb_bt8xx_probe(struct device *dev) card->irq_err_ignore = 0; break; -#ifdef BTTV_DVICO_DVBT_LITE - case BTTV_DVICO_DVBT_LITE: +#ifdef BTTV_BOARD_DVICO_DVBT_LITE + case BTTV_BOARD_DVICO_DVBT_LITE: #endif card->gpio_mode = 0x0400C060; card->op_sync_orin = 0; @@ -765,26 +823,34 @@ static int dvb_bt8xx_probe(struct device *dev) * DA_APP(parallel) */ break; -#ifdef BTTV_TWINHAN_VP3021 - case BTTV_TWINHAN_VP3021: +#ifdef BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE + case BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE: +#endif + card->gpio_mode = 0x0400c060; + card->op_sync_orin = BT878_RISC_SYNC_MASK; + card->irq_err_ignore = BT878_AFBUS | BT878_AFDSR; + break; + +#ifdef BTTV_BOARD_TWINHAN_VP3021 + case BTTV_BOARD_TWINHAN_VP3021: #else - case BTTV_NEBULA_DIGITV: + case BTTV_BOARD_NEBULA_DIGITV: #endif - case BTTV_AVDVBT_761: + case BTTV_BOARD_AVDVBT_761: card->gpio_mode = (1 << 26) | (1 << 14) | (1 << 5); card->op_sync_orin = 0; card->irq_err_ignore = 0; /* A_PWRDN DA_SBR DA_APP (high speed serial) */ break; - case BTTV_AVDVBT_771: //case 0x07711461: + case BTTV_BOARD_AVDVBT_771: //case 0x07711461: card->gpio_mode = 0x0400402B; card->op_sync_orin = BT878_RISC_SYNC_MASK; card->irq_err_ignore = 0; /* A_PWRDN DA_SBR DA_APP[0] PKTP=10 RISC_ENABLE FIFO_ENABLE*/ break; - case BTTV_TWINHAN_DST: + case BTTV_BOARD_TWINHAN_DST: card->gpio_mode = 0x2204f2c; card->op_sync_orin = BT878_RISC_SYNC_MASK; card->irq_err_ignore = BT878_APABORT | BT878_ARIPERR | @@ -802,7 +868,7 @@ static int dvb_bt8xx_probe(struct device *dev) * RISC+FIFO ENABLE */ break; - case BTTV_PC_HDTV: + case BTTV_BOARD_PC_HDTV: card->gpio_mode = 0x0100EC7B; card->op_sync_orin = 0; card->irq_err_ignore = 0; diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.h b/drivers/media/dvb/bt8xx/dvb-bt8xx.h index 9ec8e5bd6c1f..cf035a80361c 100644 --- a/drivers/media/dvb/bt8xx/dvb-bt8xx.h +++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.h @@ -35,6 +35,7 @@ #include "nxt6000.h" #include "cx24110.h" #include "or51211.h" +#include "lgdt330x.h" struct dvb_bt8xx_card { struct semaphore lock; diff --git a/drivers/media/dvb/dvb-core/demux.h b/drivers/media/dvb/dvb-core/demux.h index 9719a3b30f78..7d7b0067f228 100644 --- a/drivers/media/dvb/dvb-core/demux.h +++ b/drivers/media/dvb/dvb-core/demux.h @@ -48,8 +48,11 @@ * DMX_MAX_SECFEED_SIZE: Maximum length (in bytes) of a private section feed filter. */ +#ifndef DMX_MAX_SECTION_SIZE +#define DMX_MAX_SECTION_SIZE 4096 +#endif #ifndef DMX_MAX_SECFEED_SIZE -#define DMX_MAX_SECFEED_SIZE 4096 +#define DMX_MAX_SECFEED_SIZE (DMX_MAX_SECTION_SIZE + 188) #endif diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c index dc476dda2b71..b4c899b15959 100644 --- a/drivers/media/dvb/dvb-core/dvb_demux.c +++ b/drivers/media/dvb/dvb-core/dvb_demux.c @@ -246,7 +246,7 @@ static int dvb_dmx_swfilter_section_copy_dump(struct dvb_demux_feed *feed, for (n = 0; sec->secbufp + 2 < limit; n++) { seclen = section_length(sec->secbuf); - if (seclen <= 0 || seclen > DMX_MAX_SECFEED_SIZE + if (seclen <= 0 || seclen > DMX_MAX_SECTION_SIZE || seclen + sec->secbufp > limit) return 0; sec->seclen = seclen; diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index a8bc84240b50..6ffa6b216363 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -42,8 +42,6 @@ #include "dvb_frontend.h" #include "dvbdev.h" -// #define DEBUG_LOCKLOSS 1 - static int dvb_frontend_debug; static int dvb_shutdown_timeout = 5; static int dvb_force_auto_inversion; @@ -438,25 +436,6 @@ static int dvb_frontend_thread(void *data) if (s & FE_HAS_LOCK) continue; else { /* if we _WERE_ tuned, but now don't have a lock */ -#ifdef DEBUG_LOCKLOSS - /* first of all try setting the tone again if it was on - this - * sometimes works around problems with noisy power supplies */ - if (fe->ops->set_tone && (fepriv->tone == SEC_TONE_ON)) { - fe->ops->set_tone(fe, fepriv->tone); - mdelay(100); - s = 0; - fe->ops->read_status(fe, &s); - if (s & FE_HAS_LOCK) { - printk("DVB%i: Lock was lost, but regained by setting " - "the tone. This may indicate your power supply " - "is noisy/slightly incompatable with this DVB-S " - "adapter\n", fe->dvb->num); - fepriv->state = FESTATE_TUNED; - continue; - } - } -#endif - /* some other reason for losing the lock - start zigzagging */ fepriv->state = FESTATE_ZIGZAG_FAST; fepriv->started_auto_step = fepriv->auto_step; check_wrapped = 0; @@ -577,6 +556,49 @@ static void dvb_frontend_stop(struct dvb_frontend *fe) fepriv->thread_pid); } +s32 timeval_usec_diff(struct timeval lasttime, struct timeval curtime) +{ + return ((curtime.tv_usec < lasttime.tv_usec) ? + 1000000 - lasttime.tv_usec + curtime.tv_usec : + curtime.tv_usec - lasttime.tv_usec); +} +EXPORT_SYMBOL(timeval_usec_diff); + +static inline void timeval_usec_add(struct timeval *curtime, u32 add_usec) +{ + curtime->tv_usec += add_usec; + if (curtime->tv_usec >= 1000000) { + curtime->tv_usec -= 1000000; + curtime->tv_sec++; + } +} + +/* + * Sleep until gettimeofday() > waketime + add_usec + * This needs to be as precise as possible, but as the delay is + * usually between 2ms and 32ms, it is done using a scheduled msleep + * followed by usleep (normally a busy-wait loop) for the remainder + */ +void dvb_frontend_sleep_until(struct timeval *waketime, u32 add_usec) +{ + struct timeval lasttime; + s32 delta, newdelta; + + timeval_usec_add(waketime, add_usec); + + do_gettimeofday(&lasttime); + delta = timeval_usec_diff(lasttime, *waketime); + if (delta > 2500) { + msleep((delta - 1500) / 1000); + do_gettimeofday(&lasttime); + newdelta = timeval_usec_diff(lasttime, *waketime); + delta = (newdelta > delta) ? 0 : newdelta; + } + if (delta > 0) + udelay(delta); +} +EXPORT_SYMBOL(dvb_frontend_sleep_until); + static int dvb_frontend_start(struct dvb_frontend *fe) { int ret; @@ -728,6 +750,60 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, err = fe->ops->dishnetwork_send_legacy_command(fe, (unsigned int) parg); fepriv->state = FESTATE_DISEQC; fepriv->status = 0; + } else if (fe->ops->set_voltage) { + /* + * NOTE: This is a fallback condition. Some frontends + * (stv0299 for instance) take longer than 8msec to + * respond to a set_voltage command. Those switches + * need custom routines to switch properly. For all + * other frontends, the following shoule work ok. + * Dish network legacy switches (as used by Dish500) + * are controlled by sending 9-bit command words + * spaced 8msec apart. + * the actual command word is switch/port dependant + * so it is up to the userspace application to send + * the right command. + * The command must always start with a '0' after + * initialization, so parg is 8 bits and does not + * include the initialization or start bit + */ + unsigned int cmd = ((unsigned int) parg) << 1; + struct timeval nexttime; + struct timeval tv[10]; + int i; + u8 last = 1; + if (dvb_frontend_debug) + printk("%s switch command: 0x%04x\n", __FUNCTION__, cmd); + do_gettimeofday(&nexttime); + if (dvb_frontend_debug) + memcpy(&tv[0], &nexttime, sizeof(struct timeval)); + /* before sending a command, initialize by sending + * a 32ms 18V to the switch + */ + fe->ops->set_voltage(fe, SEC_VOLTAGE_18); + dvb_frontend_sleep_until(&nexttime, 32000); + + for (i = 0; i < 9; i++) { + if (dvb_frontend_debug) + do_gettimeofday(&tv[i + 1]); + if ((cmd & 0x01) != last) { + /* set voltage to (last ? 13V : 18V) */ + fe->ops->set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18); + last = (last) ? 0 : 1; + } + cmd = cmd >> 1; + if (i != 8) + dvb_frontend_sleep_until(&nexttime, 8000); + } + if (dvb_frontend_debug) { + printk("%s(%d): switch delay (should be 32k followed by all 8k\n", + __FUNCTION__, fe->dvb->num); + for (i = 1; i < 10; i++) + printk("%d: %d\n", i, timeval_usec_diff(tv[i-1] , tv[i])); + } + err = 0; + fepriv->state = FESTATE_DISEQC; + fepriv->status = 0; } break; diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 9c2c1d1136bd..348c9b0b988a 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -101,4 +101,7 @@ extern int dvb_register_frontend(struct dvb_adapter* dvb, extern int dvb_unregister_frontend(struct dvb_frontend* fe); +extern void dvb_frontend_sleep_until(struct timeval *waketime, u32 add_usec); +extern s32 timeval_usec_diff(struct timeval lasttime, struct timeval curtime); + #endif diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c index e55322ef76b3..49f541d9a042 100644 --- a/drivers/media/dvb/dvb-usb/a800.c +++ b/drivers/media/dvb/dvb-usb/a800.c @@ -43,11 +43,9 @@ static struct dvb_usb_rc_key a800_rc_keys[] = { { 0x02, 0x13, KEY_RIGHT }, /* R / CH RTN */ { 0x02, 0x17, KEY_PROG2 }, /* SNAP SHOT */ { 0x02, 0x10, KEY_PROG3 }, /* 16-CH PREV */ - { 0x02, 0x03, KEY_CHANNELUP }, /* CH UP */ { 0x02, 0x1e, KEY_VOLUMEDOWN }, /* VOL DOWN */ { 0x02, 0x0c, KEY_ZOOM }, /* FULL SCREEN */ { 0x02, 0x1f, KEY_VOLUMEUP }, /* VOL UP */ - { 0x02, 0x02, KEY_CHANNELDOWN }, /* CH DOWN */ { 0x02, 0x14, KEY_MUTE }, /* MUTE */ { 0x02, 0x08, KEY_AUDIO }, /* AUDIO */ { 0x02, 0x19, KEY_RECORD }, /* RECORD */ @@ -57,8 +55,6 @@ static struct dvb_usb_rc_key a800_rc_keys[] = { { 0x02, 0x1d, KEY_BACK }, /* << / RED */ { 0x02, 0x1c, KEY_FORWARD }, /* >> / YELLOW */ { 0x02, 0x03, KEY_TEXT }, /* TELETEXT */ - { 0x02, 0x01, KEY_FIRST }, /* |<< / GREEN */ - { 0x02, 0x00, KEY_LAST }, /* >>| / BLUE */ { 0x02, 0x04, KEY_EPG }, /* EPG */ { 0x02, 0x15, KEY_MENU }, /* MENU */ diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c index 0058505634a0..aa271a2496d5 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-mb.c +++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c @@ -82,13 +82,15 @@ static int dibusb_tuner_probe_and_attach(struct dvb_usb_device *d) static struct dvb_usb_properties dibusb1_1_properties; static struct dvb_usb_properties dibusb1_1_an2235_properties; static struct dvb_usb_properties dibusb2_0b_properties; +static struct dvb_usb_properties artec_t1_usb2_properties; static int dibusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { if (dvb_usb_device_init(intf,&dibusb1_1_properties,THIS_MODULE,NULL) == 0 || dvb_usb_device_init(intf,&dibusb1_1_an2235_properties,THIS_MODULE,NULL) == 0 || - dvb_usb_device_init(intf,&dibusb2_0b_properties,THIS_MODULE,NULL) == 0) + dvb_usb_device_init(intf,&dibusb2_0b_properties,THIS_MODULE,NULL) == 0 || + dvb_usb_device_init(intf,&artec_t1_usb2_properties,THIS_MODULE,NULL) == 0) return 0; return -EINVAL; @@ -128,10 +130,13 @@ static struct usb_device_id dibusb_dib3000mb_table [] = { /* 27 */ { USB_DEVICE(USB_VID_KWORLD, USB_PID_KWORLD_VSTREAM_COLD) }, +/* 28 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) }, +/* 29 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_WARM) }, + // #define DVB_USB_DIBUSB_MB_FAULTY_USB_IDs #ifdef DVB_USB_DIBUSB_MB_FAULTY_USB_IDs -/* 28 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) }, +/* 30 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) }, #endif { } /* Terminating entry */ }; @@ -264,7 +269,7 @@ static struct dvb_usb_properties dibusb1_1_an2235_properties = { }, #ifdef DVB_USB_DIBUSB_MB_FAULTY_USB_IDs { "Artec T1 USB1.1 TVBOX with AN2235 (faulty USB IDs)", - { &dibusb_dib3000mb_table[28], NULL }, + { &dibusb_dib3000mb_table[30], NULL }, { NULL }, }, #endif @@ -273,7 +278,7 @@ static struct dvb_usb_properties dibusb1_1_an2235_properties = { static struct dvb_usb_properties dibusb2_0b_properties = { .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, - .pid_filter_count = 32, + .pid_filter_count = 16, .usb_ctrl = CYPRESS_FX2, @@ -321,6 +326,52 @@ static struct dvb_usb_properties dibusb2_0b_properties = { } }; +static struct dvb_usb_properties artec_t1_usb2_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .pid_filter_count = 16, + + .usb_ctrl = CYPRESS_FX2, + + .firmware = "dvb-usb-dibusb-6.0.0.8.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .power_ctrl = dibusb2_0_power_ctrl, + .frontend_attach = dibusb_dib3000mb_frontend_attach, + .tuner_attach = dibusb_tuner_probe_and_attach, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dibusb_rc_keys, + .rc_key_map_size = 63, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_query = dibusb_rc_query, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 1, + .devices = { + { "Artec T1 USB2.0", + { &dibusb_dib3000mb_table[28], NULL }, + { &dibusb_dib3000mb_table[29], NULL }, + }, + } +}; + static struct usb_driver dibusb_driver = { .owner = THIS_MODULE, .name = "dvb_usb_dibusb_mb", diff --git a/drivers/media/dvb/dvb-usb/dibusb.h b/drivers/media/dvb/dvb-usb/dibusb.h index 6611f62977c0..2d99d05c7eab 100644 --- a/drivers/media/dvb/dvb-usb/dibusb.h +++ b/drivers/media/dvb/dvb-usb/dibusb.h @@ -11,7 +11,9 @@ #ifndef _DVB_USB_DIBUSB_H_ #define _DVB_USB_DIBUSB_H_ -#define DVB_USB_LOG_PREFIX "dibusb" +#ifndef DVB_USB_LOG_PREFIX + #define DVB_USB_LOG_PREFIX "dibusb" +#endif #include "dvb-usb.h" #include "dib3000.h" diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 0818996bf150..6be99e537e12 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -43,10 +43,14 @@ #define USB_PID_COMPRO_DVBU2000_WARM 0xd001 #define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c #define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d +#define USB_PID_DIBCOM_HOOK_DEFAULT 0x0064 +#define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM 0x0065 #define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8 #define USB_PID_DIBCOM_MOD3000_WARM 0x0bb9 #define USB_PID_DIBCOM_MOD3001_COLD 0x0bc6 #define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7 +#define USB_PID_DIBCOM_STK7700 0x1e14 +#define USB_PID_DIBCOM_STK7700_REENUM 0x1e15 #define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131 #define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 #define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1 @@ -68,6 +72,7 @@ #define USB_PID_ULTIMA_TVBOX_AN2235_WARM 0x8108 #define USB_PID_ULTIMA_TVBOX_ANCHOR_COLD 0x2235 #define USB_PID_ULTIMA_TVBOX_USB2_COLD 0x8109 +#define USB_PID_ULTIMA_TVBOX_USB2_WARM 0x810a #define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD 0x8613 #define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM 0x1002 #define USB_PID_UNK_HYPER_PALTEK_COLD 0x005e diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c index f5799a4c228e..36b7048c02d2 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c @@ -196,7 +196,9 @@ static int dvb_usb_allocate_stream_buffers(struct dvb_usb_device *d, int num, un dvb_usb_free_stream_buffers(d); return -ENOMEM; } - deb_mem("buffer %d: %p (dma: %d)\n",d->buf_num,d->buf_list[d->buf_num],d->dma_addr[d->buf_num]); + deb_mem("buffer %d: %p (dma: %llu)\n", + d->buf_num, d->buf_list[d->buf_num], + (unsigned long long)d->dma_addr[d->buf_num]); memset(d->buf_list[d->buf_num],0,size); } deb_mem("allocation successful\n"); diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index a50a41f6f79d..8e269e1c1f9d 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -164,6 +164,14 @@ config DVB_NXT2002 help An ATSC 8VSB tuner module. Say Y when you want to support this frontend. +config DVB_NXT200X + tristate "Nextwave NXT2002/NXT2004 based" + depends on DVB_CORE + select FW_LOADER + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + config DVB_OR51211 tristate "or51211 based (pcHDTV HD2000 card)" depends on DVB_CORE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index ad8658ffd60a..a98760fe08a1 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o obj-$(CONFIG_DVB_TDA10021) += tda10021.o obj-$(CONFIG_DVB_STV0297) += stv0297.o obj-$(CONFIG_DVB_NXT2002) += nxt2002.o +obj-$(CONFIG_DVB_NXT200X) += nxt200x.o obj-$(CONFIG_DVB_OR51211) += or51211.o obj-$(CONFIG_DVB_OR51132) += or51132.o obj-$(CONFIG_DVB_BCM3510) += bcm3510.o diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c index 536c35d969b7..f857b869616c 100644 --- a/drivers/media/dvb/frontends/dvb-pll.c +++ b/drivers/media/dvb/frontends/dvb-pll.c @@ -226,7 +226,7 @@ struct dvb_pll_desc dvb_pll_tua6034 = { EXPORT_SYMBOL(dvb_pll_tua6034); /* Infineon TUA6034 - * used in LG Innotek TDVS-H062F + * used in LG TDVS H061F and LG TDVS H062F */ struct dvb_pll_desc dvb_pll_tdvs_tua6034 = { .name = "LG/Infineon TUA6034", @@ -292,6 +292,58 @@ struct dvb_pll_desc dvb_pll_tded4 = { }; EXPORT_SYMBOL(dvb_pll_tded4); +/* ALPS TDHU2 + * used in AverTVHD MCE A180 + */ +struct dvb_pll_desc dvb_pll_tdhu2 = { + .name = "ALPS TDHU2", + .min = 54000000, + .max = 864000000, + .count = 4, + .entries = { + { 162000000, 44000000, 62500, 0x85, 0x01 }, + { 426000000, 44000000, 62500, 0x85, 0x02 }, + { 782000000, 44000000, 62500, 0x85, 0x08 }, + { 999999999, 44000000, 62500, 0x85, 0x88 }, + } +}; +EXPORT_SYMBOL(dvb_pll_tdhu2); + +/* Philips TUV1236D + * used in ATI HDTV Wonder + */ +struct dvb_pll_desc dvb_pll_tuv1236d = { + .name = "Philips TUV1236D", + .min = 54000000, + .max = 864000000, + .count = 3, + .entries = { + { 157250000, 44000000, 62500, 0xc6, 0x41 }, + { 454000000, 44000000, 62500, 0xc6, 0x42 }, + { 999999999, 44000000, 62500, 0xc6, 0x44 }, + }, +}; +EXPORT_SYMBOL(dvb_pll_tuv1236d); + +/* Samsung TBMV30111IN + * used in Air2PC ATSC - 2nd generation (nxt2002) + */ +struct dvb_pll_desc dvb_pll_tbmv30111in = { + .name = "Samsung TBMV30111IN", + .min = 54000000, + .max = 860000000, + .count = 4, + .entries = { + { 172000000, 44000000, 166666, 0xb4, 0x01 }, + { 214000000, 44000000, 166666, 0xb4, 0x02 }, + { 467000000, 44000000, 166666, 0xbc, 0x02 }, + { 721000000, 44000000, 166666, 0xbc, 0x08 }, + { 841000000, 44000000, 166666, 0xf4, 0x08 }, + { 999999999, 44000000, 166666, 0xfc, 0x02 }, + } +}; +EXPORT_SYMBOL(dvb_pll_tbmv30111in); + /* ----------------------------------------------------------- */ /* code */ diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h index 205b2d1a8852..497d31dcf41e 100644 --- a/drivers/media/dvb/frontends/dvb-pll.h +++ b/drivers/media/dvb/frontends/dvb-pll.h @@ -36,6 +36,10 @@ extern struct dvb_pll_desc dvb_pll_tda665x; extern struct dvb_pll_desc dvb_pll_fmd1216me; extern struct dvb_pll_desc dvb_pll_tded4; +extern struct dvb_pll_desc dvb_pll_tuv1236d; +extern struct dvb_pll_desc dvb_pll_tdhu2; +extern struct dvb_pll_desc dvb_pll_tbmv30111in; + int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf, u32 freq, int bandwidth); diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c index 7852b83b82d4..6a33f5a19a8d 100644 --- a/drivers/media/dvb/frontends/lgdt330x.c +++ b/drivers/media/dvb/frontends/lgdt330x.c @@ -26,6 +26,8 @@ * DViCO FusionHDTV 3 Gold-Q * DViCO FusionHDTV 3 Gold-T * DViCO FusionHDTV 5 Gold + * DViCO FusionHDTV 5 Lite + * Air2PC/AirStar 2 ATSC 3rd generation (HD5000) * * TODO: * signal strength always returns 0. @@ -222,6 +224,11 @@ static int lgdt330x_init(struct dvb_frontend* fe) 0x4c, 0x14 }; + static u8 flip_lgdt3303_init_data[] = { + 0x4c, 0x14, + 0x87, 0xf3 + }; + struct lgdt330x_state* state = fe->demodulator_priv; char *chip_name; int err; @@ -234,8 +241,13 @@ static int lgdt330x_init(struct dvb_frontend* fe) break; case LGDT3303: chip_name = "LGDT3303"; - err = i2c_write_demod_bytes(state, lgdt3303_init_data, - sizeof(lgdt3303_init_data)); + if (state->config->clock_polarity_flip) { + err = i2c_write_demod_bytes(state, flip_lgdt3303_init_data, + sizeof(flip_lgdt3303_init_data)); + } else { + err = i2c_write_demod_bytes(state, lgdt3303_init_data, + sizeof(lgdt3303_init_data)); + } break; default: chip_name = "undefined"; @@ -743,9 +755,8 @@ static struct dvb_frontend_ops lgdt3302_ops = { .frequency_min= 54000000, .frequency_max= 858000000, .frequency_stepsize= 62500, - /* Symbol rate is for all VSB modes need to check QAM */ - .symbol_rate_min = 10762000, - .symbol_rate_max = 10762000, + .symbol_rate_min = 5056941, /* QAM 64 */ + .symbol_rate_max = 10762000, /* VSB 8 */ .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB }, .init = lgdt330x_init, @@ -767,9 +778,8 @@ static struct dvb_frontend_ops lgdt3303_ops = { .frequency_min= 54000000, .frequency_max= 858000000, .frequency_stepsize= 62500, - /* Symbol rate is for all VSB modes need to check QAM */ - .symbol_rate_min = 10762000, - .symbol_rate_max = 10762000, + .symbol_rate_min = 5056941, /* QAM 64 */ + .symbol_rate_max = 10762000, /* VSB 8 */ .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB }, .init = lgdt330x_init, diff --git a/drivers/media/dvb/frontends/lgdt330x.h b/drivers/media/dvb/frontends/lgdt330x.h index e209ba1e47c5..2a6529cccf1a 100644 --- a/drivers/media/dvb/frontends/lgdt330x.h +++ b/drivers/media/dvb/frontends/lgdt330x.h @@ -47,6 +47,10 @@ struct lgdt330x_config /* Need to set device param for start_dma */ int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); + + /* Flip the polarity of the mpeg data transfer clock using alternate init data + * This option applies ONLY to LGDT3303 - 0:disabled (default) 1:enabled */ + int clock_polarity_flip; }; extern struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config, diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c new file mode 100644 index 000000000000..bad0933eb714 --- /dev/null +++ b/drivers/media/dvb/frontends/nxt200x.c @@ -0,0 +1,1205 @@ +/* + * Support for NXT2002 and NXT2004 - VSB/QAM + * + * Copyright (C) 2005 Kirk Lapray (kirk.lapray@gmail.com) + * based on nxt2002 by Taylor Jacob <rtjacob@earthlink.net> + * and nxt2004 by Jean-Francois Thibert (jeanfrancois@sagetv.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * +*/ + +/* + * NOTES ABOUT THIS DRIVER + * + * This Linux driver supports: + * B2C2/BBTI Technisat Air2PC - ATSC (NXT2002) + * AverTVHD MCE A180 (NXT2004) + * ATI HDTV Wonder (NXT2004) + * + * This driver needs external firmware. Please use the command + * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" or + * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2004" to + * download/extract the appropriate firmware, and then copy it to + * /usr/lib/hotplug/firmware/ or /lib/firmware/ + * (depending on configuration of firmware hotplug). + */ +#define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw" +#define NXT2004_DEFAULT_FIRMWARE "dvb-fe-nxt2004.fw" +#define CRC_CCIT_MASK 0x1021 + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/moduleparam.h> + +#include "dvb_frontend.h" +#include "dvb-pll.h" +#include "nxt200x.h" + +struct nxt200x_state { + + struct i2c_adapter* i2c; + struct dvb_frontend_ops ops; + const struct nxt200x_config* config; + struct dvb_frontend frontend; + + /* demodulator private data */ + nxt_chip_type demod_chip; + u8 initialised:1; +}; + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) printk(KERN_DEBUG "nxt200x: " args); \ + } while (0) + +static int i2c_writebytes (struct nxt200x_state* state, u8 addr, u8 *buf, u8 len) +{ + int err; + struct i2c_msg msg = { .addr = addr, .flags = 0, .buf = buf, .len = len }; + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + printk (KERN_WARNING "nxt200x: %s: i2c write error (addr 0x%02x, err == %i)\n", + __FUNCTION__, addr, err); + return -EREMOTEIO; + } + return 0; +} + +static u8 i2c_readbytes (struct nxt200x_state* state, u8 addr, u8* buf, u8 len) +{ + int err; + struct i2c_msg msg = { .addr = addr, .flags = I2C_M_RD, .buf = buf, .len = len }; + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + printk (KERN_WARNING "nxt200x: %s: i2c read error (addr 0x%02x, err == %i)\n", + __FUNCTION__, addr, err); + return -EREMOTEIO; + } + return 0; +} + +static int nxt200x_writebytes (struct nxt200x_state* state, u8 reg, u8 *buf, u8 len) +{ + u8 buf2 [len+1]; + int err; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf2, .len = len + 1 }; + + buf2[0] = reg; + memcpy(&buf2[1], buf, len); + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + printk (KERN_WARNING "nxt200x: %s: i2c write error (addr 0x%02x, err == %i)\n", + __FUNCTION__, state->config->demod_address, err); + return -EREMOTEIO; + } + return 0; +} + +static u8 nxt200x_readbytes (struct nxt200x_state* state, u8 reg, u8* buf, u8 len) +{ + u8 reg2 [] = { reg }; + + struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = reg2, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } }; + + int err; + + if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) { + printk (KERN_WARNING "nxt200x: %s: i2c read error (addr 0x%02x, err == %i)\n", + __FUNCTION__, state->config->demod_address, err); + return -EREMOTEIO; + } + return 0; +} + +static u16 nxt200x_crc(u16 crc, u8 c) +{ + u8 i; + u16 input = (u16) c & 0xFF; + + input<<=8; + for(i=0; i<8; i++) { + if((crc^input) & 0x8000) + crc=(crc<<1)^CRC_CCIT_MASK; + else + crc<<=1; + input<<=1; + } + return crc; +} + +static int nxt200x_writereg_multibyte (struct nxt200x_state* state, u8 reg, u8* data, u8 len) +{ + u8 attr, len2, buf; + dprintk("%s\n", __FUNCTION__); + + /* set mutli register register */ + nxt200x_writebytes(state, 0x35, ®, 1); + + /* send the actual data */ + nxt200x_writebytes(state, 0x36, data, len); + + switch (state->demod_chip) { + case NXT2002: + len2 = len; + buf = 0x02; + break; + case NXT2004: + /* probably not right, but gives correct values */ + attr = 0x02; + if (reg & 0x80) { + attr = attr << 1; + if (reg & 0x04) + attr = attr >> 1; + } + /* set write bit */ + len2 = ((attr << 4) | 0x10) | len; + buf = 0x80; + break; + default: + return -EINVAL; + break; + } + + /* set multi register length */ + nxt200x_writebytes(state, 0x34, &len2, 1); + + /* toggle the multireg write bit */ + nxt200x_writebytes(state, 0x21, &buf, 1); + + nxt200x_readbytes(state, 0x21, &buf, 1); + + switch (state->demod_chip) { + case NXT2002: + if ((buf & 0x02) == 0) + return 0; + break; + case NXT2004: + if (buf == 0) + return 0; + break; + default: + return -EINVAL; + break; + } + + printk(KERN_WARNING "nxt200x: Error writing multireg register 0x%02X\n",reg); + + return 0; +} + +static int nxt200x_readreg_multibyte (struct nxt200x_state* state, u8 reg, u8* data, u8 len) +{ + int i; + u8 buf, len2, attr; + dprintk("%s\n", __FUNCTION__); + + /* set mutli register register */ + nxt200x_writebytes(state, 0x35, ®, 1); + + switch (state->demod_chip) { + case NXT2002: + /* set multi register length */ + len2 = len & 0x80; + nxt200x_writebytes(state, 0x34, &len2, 1); + + /* read the actual data */ + nxt200x_readbytes(state, reg, data, len); + return 0; + break; + case NXT2004: + /* probably not right, but gives correct values */ + attr = 0x02; + if (reg & 0x80) { + attr = attr << 1; + if (reg & 0x04) + attr = attr >> 1; + } + + /* set multi register length */ + len2 = (attr << 4) | len; + nxt200x_writebytes(state, 0x34, &len2, 1); + + /* toggle the multireg bit*/ + buf = 0x80; + nxt200x_writebytes(state, 0x21, &buf, 1); + + /* read the actual data */ + for(i = 0; i < len; i++) { + nxt200x_readbytes(state, 0x36 + i, &data[i], 1); + } + return 0; + break; + default: + return -EINVAL; + break; + } +} + +static void nxt200x_microcontroller_stop (struct nxt200x_state* state) +{ + u8 buf, stopval, counter = 0; + dprintk("%s\n", __FUNCTION__); + + /* set correct stop value */ + switch (state->demod_chip) { + case NXT2002: + stopval = 0x40; + break; + case NXT2004: + stopval = 0x10; + break; + default: + stopval = 0; + break; + } + + buf = 0x80; + nxt200x_writebytes(state, 0x22, &buf, 1); + + while (counter < 20) { + nxt200x_readbytes(state, 0x31, &buf, 1); + if (buf & stopval) + return; + msleep(10); + counter++; + } + + printk(KERN_WARNING "nxt200x: Timeout waiting for nxt200x to stop. This is ok after firmware upload.\n"); + return; +} + +static void nxt200x_microcontroller_start (struct nxt200x_state* state) +{ + u8 buf; + dprintk("%s\n", __FUNCTION__); + + buf = 0x00; + nxt200x_writebytes(state, 0x22, &buf, 1); +} + +static void nxt2004_microcontroller_init (struct nxt200x_state* state) +{ + u8 buf[9]; + u8 counter = 0; + dprintk("%s\n", __FUNCTION__); + + buf[0] = 0x00; + nxt200x_writebytes(state, 0x2b, buf, 1); + buf[0] = 0x70; + nxt200x_writebytes(state, 0x34, buf, 1); + buf[0] = 0x04; + nxt200x_writebytes(state, 0x35, buf, 1); + buf[0] = 0x01; buf[1] = 0x23; buf[2] = 0x45; buf[3] = 0x67; buf[4] = 0x89; + buf[5] = 0xAB; buf[6] = 0xCD; buf[7] = 0xEF; buf[8] = 0xC0; + nxt200x_writebytes(state, 0x36, buf, 9); + buf[0] = 0x80; + nxt200x_writebytes(state, 0x21, buf, 1); + + while (counter < 20) { + nxt200x_readbytes(state, 0x21, buf, 1); + if (buf[0] == 0) + return; + msleep(10); + counter++; + } + + printk(KERN_WARNING "nxt200x: Timeout waiting for nxt2004 to init.\n"); + + return; +} + +static int nxt200x_writetuner (struct nxt200x_state* state, u8* data) +{ + u8 buf, count = 0; + + dprintk("%s\n", __FUNCTION__); + + dprintk("Tuner Bytes: %02X %02X %02X %02X\n", data[0], data[1], data[2], data[3]); + + /* if NXT2004, write directly to tuner. if NXT2002, write through NXT chip. + * direct write is required for Philips TUV1236D and ALPS TDHU2 */ + switch (state->demod_chip) { + case NXT2004: + if (i2c_writebytes(state, state->config->pll_address, data, 4)) + printk(KERN_WARNING "nxt200x: error writing to tuner\n"); + /* wait until we have a lock */ + while (count < 20) { + i2c_readbytes(state, state->config->pll_address, &buf, 1); + if (buf & 0x40) + return 0; + msleep(100); + count++; + } + printk("nxt2004: timeout waiting for tuner lock\n"); + break; + case NXT2002: + /* set the i2c transfer speed to the tuner */ + buf = 0x03; + nxt200x_writebytes(state, 0x20, &buf, 1); + + /* setup to transfer 4 bytes via i2c */ + buf = 0x04; + nxt200x_writebytes(state, 0x34, &buf, 1); + + /* write actual tuner bytes */ + nxt200x_writebytes(state, 0x36, data, 4); + + /* set tuner i2c address */ + buf = state->config->pll_address; + nxt200x_writebytes(state, 0x35, &buf, 1); + + /* write UC Opmode to begin transfer */ + buf = 0x80; + nxt200x_writebytes(state, 0x21, &buf, 1); + + while (count < 20) { + nxt200x_readbytes(state, 0x21, &buf, 1); + if ((buf & 0x80)== 0x00) + return 0; + msleep(100); + count++; + } + printk("nxt2002: timeout error writing tuner\n"); + break; + default: + return -EINVAL; + break; + } + return 0; +} + +static void nxt200x_agc_reset(struct nxt200x_state* state) +{ + u8 buf; + dprintk("%s\n", __FUNCTION__); + + switch (state->demod_chip) { + case NXT2002: + buf = 0x08; + nxt200x_writebytes(state, 0x08, &buf, 1); + buf = 0x00; + nxt200x_writebytes(state, 0x08, &buf, 1); + break; + case NXT2004: + nxt200x_readreg_multibyte(state, 0x08, &buf, 1); + buf = 0x08; + nxt200x_writereg_multibyte(state, 0x08, &buf, 1); + buf = 0x00; + nxt200x_writereg_multibyte(state, 0x08, &buf, 1); + break; + default: + break; + } + return; +} + +static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) +{ + + struct nxt200x_state* state = fe->demodulator_priv; + u8 buf[3], written = 0, chunkpos = 0; + u16 rambase, position, crc = 0; + + dprintk("%s\n", __FUNCTION__); + dprintk("Firmware is %zu bytes\n", fw->size); + + /* Get the RAM base for this nxt2002 */ + nxt200x_readbytes(state, 0x10, buf, 1); + + if (buf[0] & 0x10) + rambase = 0x1000; + else + rambase = 0x0000; + + dprintk("rambase on this nxt2002 is %04X\n", rambase); + + /* Hold the micro in reset while loading firmware */ + buf[0] = 0x80; + nxt200x_writebytes(state, 0x2B, buf, 1); + + for (position = 0; position < fw->size; position++) { + if (written == 0) { + crc = 0; + chunkpos = 0x28; + buf[0] = ((rambase + position) >> 8); + buf[1] = (rambase + position) & 0xFF; + buf[2] = 0x81; + /* write starting address */ + nxt200x_writebytes(state, 0x29, buf, 3); + } + written++; + chunkpos++; + + if ((written % 4) == 0) + nxt200x_writebytes(state, chunkpos, &fw->data[position-3], 4); + + crc = nxt200x_crc(crc, fw->data[position]); + + if ((written == 255) || (position+1 == fw->size)) { + /* write remaining bytes of firmware */ + nxt200x_writebytes(state, chunkpos+4-(written %4), + &fw->data[position-(written %4) + 1], + written %4); + buf[0] = crc << 8; + buf[1] = crc & 0xFF; + + /* write crc */ + nxt200x_writebytes(state, 0x2C, buf, 2); + + /* do a read to stop things */ + nxt200x_readbytes(state, 0x2A, buf, 1); + + /* set transfer mode to complete */ + buf[0] = 0x80; + nxt200x_writebytes(state, 0x2B, buf, 1); + + written = 0; + } + } + + return 0; +}; + +static int nxt2004_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) +{ + + struct nxt200x_state* state = fe->demodulator_priv; + u8 buf[3]; + u16 rambase, position, crc=0; + + dprintk("%s\n", __FUNCTION__); + dprintk("Firmware is %zu bytes\n", fw->size); + + /* set rambase */ + rambase = 0x1000; + + /* hold the micro in reset while loading firmware */ + buf[0] = 0x80; + nxt200x_writebytes(state, 0x2B, buf,1); + + /* calculate firmware CRC */ + for (position = 0; position < fw->size; position++) { + crc = nxt200x_crc(crc, fw->data[position]); + } + + buf[0] = rambase >> 8; + buf[1] = rambase & 0xFF; + buf[2] = 0x81; + /* write starting address */ + nxt200x_writebytes(state,0x29,buf,3); + + for (position = 0; position < fw->size;) { + nxt200x_writebytes(state, 0x2C, &fw->data[position], + fw->size-position > 255 ? 255 : fw->size-position); + position += (fw->size-position > 255 ? 255 : fw->size-position); + } + buf[0] = crc >> 8; + buf[1] = crc & 0xFF; + + dprintk("firmware crc is 0x%02X 0x%02X\n", buf[0], buf[1]); + + /* write crc */ + nxt200x_writebytes(state, 0x2C, buf,2); + + /* do a read to stop things */ + nxt200x_readbytes(state, 0x2C, buf, 1); + + /* set transfer mode to complete */ + buf[0] = 0x80; + nxt200x_writebytes(state, 0x2B, buf,1); + + return 0; +}; + +static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe, + struct dvb_frontend_parameters *p) +{ + struct nxt200x_state* state = fe->demodulator_priv; + u8 buf[4]; + + /* stop the micro first */ + nxt200x_microcontroller_stop(state); + + if (state->demod_chip == NXT2004) { + /* make sure demod is set to digital */ + buf[0] = 0x04; + nxt200x_writebytes(state, 0x14, buf, 1); + buf[0] = 0x00; + nxt200x_writebytes(state, 0x17, buf, 1); + } + + /* get tuning information */ + dvb_pll_configure(state->config->pll_desc, buf, p->frequency, 0); + + /* set additional params */ + switch (p->u.vsb.modulation) { + case QAM_64: + case QAM_256: + /* Set punctured clock for QAM */ + /* This is just a guess since I am unable to test it */ + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 1); + + /* set input */ + if (state->config->set_pll_input) + state->config->set_pll_input(buf, 1); + break; + case VSB_8: + /* Set non-punctured clock for VSB */ + if (state->config->set_ts_params) + state->config->set_ts_params(fe, 0); + + /* set input */ + if (state->config->set_pll_input) + state->config->set_pll_input(buf, 0); + break; + default: + return -EINVAL; + break; + } + + /* write frequency information */ + nxt200x_writetuner(state, buf); + + /* reset the agc now that tuning has been completed */ + nxt200x_agc_reset(state); + + /* set target power level */ + switch (p->u.vsb.modulation) { + case QAM_64: + case QAM_256: + buf[0] = 0x74; + break; + case VSB_8: + buf[0] = 0x70; + break; + default: + return -EINVAL; + break; + } + nxt200x_writebytes(state, 0x42, buf, 1); + + /* configure sdm */ + switch (state->demod_chip) { + case NXT2002: + buf[0] = 0x87; + break; + case NXT2004: + buf[0] = 0x07; + break; + default: + return -EINVAL; + break; + } + nxt200x_writebytes(state, 0x57, buf, 1); + + /* write sdm1 input */ + buf[0] = 0x10; + buf[1] = 0x00; + nxt200x_writebytes(state, 0x58, buf, 2); + + /* write sdmx input */ + switch (p->u.vsb.modulation) { + case QAM_64: + buf[0] = 0x68; + break; + case QAM_256: + buf[0] = 0x64; + break; + case VSB_8: + buf[0] = 0x60; + break; + default: + return -EINVAL; + break; + } + buf[1] = 0x00; + nxt200x_writebytes(state, 0x5C, buf, 2); + + /* write adc power lpf fc */ + buf[0] = 0x05; + nxt200x_writebytes(state, 0x43, buf, 1); + + if (state->demod_chip == NXT2004) { + /* write ??? */ + buf[0] = 0x00; + buf[1] = 0x00; + nxt200x_writebytes(state, 0x46, buf, 2); + } + + /* write accumulator2 input */ + buf[0] = 0x80; + buf[1] = 0x00; + nxt200x_writebytes(state, 0x4B, buf, 2); + + /* write kg1 */ + buf[0] = 0x00; + nxt200x_writebytes(state, 0x4D, buf, 1); + + /* write sdm12 lpf fc */ + buf[0] = 0x44; + nxt200x_writebytes(state, 0x55, buf, 1); + + /* write agc control reg */ + buf[0] = 0x04; + nxt200x_writebytes(state, 0x41, buf, 1); + + if (state->demod_chip == NXT2004) { + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x24; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + + /* soft reset? */ + nxt200x_readreg_multibyte(state, 0x08, buf, 1); + buf[0] = 0x10; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + nxt200x_readreg_multibyte(state, 0x08, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x04; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x81, buf, 1); + buf[0] = 0x80; buf[1] = 0x00; buf[2] = 0x00; + nxt200x_writereg_multibyte(state, 0x82, buf, 3); + nxt200x_readreg_multibyte(state, 0x88, buf, 1); + buf[0] = 0x11; + nxt200x_writereg_multibyte(state, 0x88, buf, 1); + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x44; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + } + + /* write agc ucgp0 */ + switch (p->u.vsb.modulation) { + case QAM_64: + buf[0] = 0x02; + break; + case QAM_256: + buf[0] = 0x03; + break; + case VSB_8: + buf[0] = 0x00; + break; + default: + return -EINVAL; + break; + } + nxt200x_writebytes(state, 0x30, buf, 1); + + /* write agc control reg */ + buf[0] = 0x00; + nxt200x_writebytes(state, 0x41, buf, 1); + + /* write accumulator2 input */ + buf[0] = 0x80; + buf[1] = 0x00; + nxt200x_writebytes(state, 0x49, buf,2); + nxt200x_writebytes(state, 0x4B, buf,2); + + /* write agc control reg */ + buf[0] = 0x04; + nxt200x_writebytes(state, 0x41, buf, 1); + + nxt200x_microcontroller_start(state); + + if (state->demod_chip == NXT2004) { + nxt2004_microcontroller_init(state); + + /* ???? */ + buf[0] = 0xF0; + buf[1] = 0x00; + nxt200x_writebytes(state, 0x5C, buf, 2); + } + + /* adjacent channel detection should be done here, but I don't + have any stations with this need so I cannot test it */ + + return 0; +} + +static int nxt200x_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct nxt200x_state* state = fe->demodulator_priv; + u8 lock; + nxt200x_readbytes(state, 0x31, &lock, 1); + + *status = 0; + if (lock & 0x20) { + *status |= FE_HAS_SIGNAL; + *status |= FE_HAS_CARRIER; + *status |= FE_HAS_VITERBI; + *status |= FE_HAS_SYNC; + *status |= FE_HAS_LOCK; + } + return 0; +} + +static int nxt200x_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct nxt200x_state* state = fe->demodulator_priv; + u8 b[3]; + + nxt200x_readreg_multibyte(state, 0xE6, b, 3); + + *ber = ((b[0] << 8) + b[1]) * 8; + + return 0; +} + +static int nxt200x_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct nxt200x_state* state = fe->demodulator_priv; + u8 b[2]; + u16 temp = 0; + + /* setup to read cluster variance */ + b[0] = 0x00; + nxt200x_writebytes(state, 0xA1, b, 1); + + /* get multreg val */ + nxt200x_readreg_multibyte(state, 0xA6, b, 2); + + temp = (b[0] << 8) | b[1]; + *strength = ((0x7FFF - temp) & 0x0FFF) * 16; + + return 0; +} + +static int nxt200x_read_snr(struct dvb_frontend* fe, u16* snr) +{ + + struct nxt200x_state* state = fe->demodulator_priv; + u8 b[2]; + u16 temp = 0, temp2; + u32 snrdb = 0; + + /* setup to read cluster variance */ + b[0] = 0x00; + nxt200x_writebytes(state, 0xA1, b, 1); + + /* get multreg val from 0xA6 */ + nxt200x_readreg_multibyte(state, 0xA6, b, 2); + + temp = (b[0] << 8) | b[1]; + temp2 = 0x7FFF - temp; + + /* snr will be in db */ + if (temp2 > 0x7F00) + snrdb = 1000*24 + ( 1000*(30-24) * ( temp2 - 0x7F00 ) / ( 0x7FFF - 0x7F00 ) ); + else if (temp2 > 0x7EC0) + snrdb = 1000*18 + ( 1000*(24-18) * ( temp2 - 0x7EC0 ) / ( 0x7F00 - 0x7EC0 ) ); + else if (temp2 > 0x7C00) + snrdb = 1000*12 + ( 1000*(18-12) * ( temp2 - 0x7C00 ) / ( 0x7EC0 - 0x7C00 ) ); + else + snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) ); + + /* the value reported back from the frontend will be FFFF=32db 0000=0db */ + *snr = snrdb * (0xFFFF/32000); + + return 0; +} + +static int nxt200x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct nxt200x_state* state = fe->demodulator_priv; + u8 b[3]; + + nxt200x_readreg_multibyte(state, 0xE6, b, 3); + *ucblocks = b[2]; + + return 0; +} + +static int nxt200x_sleep(struct dvb_frontend* fe) +{ + return 0; +} + +static int nxt2002_init(struct dvb_frontend* fe) +{ + struct nxt200x_state* state = fe->demodulator_priv; + const struct firmware *fw; + int ret; + u8 buf[2]; + + /* request the firmware, this will block until someone uploads it */ + printk("nxt2002: Waiting for firmware upload (%s)...\n", NXT2002_DEFAULT_FIRMWARE); + ret = request_firmware(&fw, NXT2002_DEFAULT_FIRMWARE, &state->i2c->dev); + printk("nxt2002: Waiting for firmware upload(2)...\n"); + if (ret) { + printk("nxt2002: No firmware uploaded (timeout or file not found?)\n"); + return ret; + } + + ret = nxt2002_load_firmware(fe, fw); + if (ret) { + printk("nxt2002: Writing firmware to device failed\n"); + release_firmware(fw); + return ret; + } + printk("nxt2002: Firmware upload complete\n"); + + /* Put the micro into reset */ + nxt200x_microcontroller_stop(state); + + /* ensure transfer is complete */ + buf[0]=0x00; + nxt200x_writebytes(state, 0x2B, buf, 1); + + /* Put the micro into reset for real this time */ + nxt200x_microcontroller_stop(state); + + /* soft reset everything (agc,frontend,eq,fec)*/ + buf[0] = 0x0F; + nxt200x_writebytes(state, 0x08, buf, 1); + buf[0] = 0x00; + nxt200x_writebytes(state, 0x08, buf, 1); + + /* write agc sdm configure */ + buf[0] = 0xF1; + nxt200x_writebytes(state, 0x57, buf, 1); + + /* write mod output format */ + buf[0] = 0x20; + nxt200x_writebytes(state, 0x09, buf, 1); + + /* write fec mpeg mode */ + buf[0] = 0x7E; + buf[1] = 0x00; + nxt200x_writebytes(state, 0xE9, buf, 2); + + /* write mux selection */ + buf[0] = 0x00; + nxt200x_writebytes(state, 0xCC, buf, 1); + + return 0; +} + +static int nxt2004_init(struct dvb_frontend* fe) +{ + struct nxt200x_state* state = fe->demodulator_priv; + const struct firmware *fw; + int ret; + u8 buf[3]; + + /* ??? */ + buf[0]=0x00; + nxt200x_writebytes(state, 0x1E, buf, 1); + + /* request the firmware, this will block until someone uploads it */ + printk("nxt2004: Waiting for firmware upload (%s)...\n", NXT2004_DEFAULT_FIRMWARE); + ret = request_firmware(&fw, NXT2004_DEFAULT_FIRMWARE, &state->i2c->dev); + printk("nxt2004: Waiting for firmware upload(2)...\n"); + if (ret) { + printk("nxt2004: No firmware uploaded (timeout or file not found?)\n"); + return ret; + } + + ret = nxt2004_load_firmware(fe, fw); + if (ret) { + printk("nxt2004: Writing firmware to device failed\n"); + release_firmware(fw); + return ret; + } + printk("nxt2004: Firmware upload complete\n"); + + /* ensure transfer is complete */ + buf[0] = 0x01; + nxt200x_writebytes(state, 0x19, buf, 1); + + nxt2004_microcontroller_init(state); + nxt200x_microcontroller_stop(state); + nxt200x_microcontroller_stop(state); + nxt2004_microcontroller_init(state); + nxt200x_microcontroller_stop(state); + + /* soft reset everything (agc,frontend,eq,fec)*/ + buf[0] = 0xFF; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + + /* write agc sdm configure */ + buf[0] = 0xD7; + nxt200x_writebytes(state, 0x57, buf, 1); + + /* ???*/ + buf[0] = 0x07; + buf[1] = 0xfe; + nxt200x_writebytes(state, 0x35, buf, 2); + buf[0] = 0x12; + nxt200x_writebytes(state, 0x34, buf, 1); + buf[0] = 0x80; + nxt200x_writebytes(state, 0x21, buf, 1); + + /* ???*/ + buf[0] = 0x21; + nxt200x_writebytes(state, 0x0A, buf, 1); + + /* ???*/ + buf[0] = 0x01; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + + /* write fec mpeg mode */ + buf[0] = 0x7E; + buf[1] = 0x00; + nxt200x_writebytes(state, 0xE9, buf, 2); + + /* write mux selection */ + buf[0] = 0x00; + nxt200x_writebytes(state, 0xCC, buf, 1); + + /* ???*/ + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + + /* soft reset? */ + nxt200x_readreg_multibyte(state, 0x08, buf, 1); + buf[0] = 0x10; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + nxt200x_readreg_multibyte(state, 0x08, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + + /* ???*/ + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x01; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x70; + nxt200x_writereg_multibyte(state, 0x81, buf, 1); + buf[0] = 0x31; buf[1] = 0x5E; buf[2] = 0x66; + nxt200x_writereg_multibyte(state, 0x82, buf, 3); + + nxt200x_readreg_multibyte(state, 0x88, buf, 1); + buf[0] = 0x11; + nxt200x_writereg_multibyte(state, 0x88, buf, 1); + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x40; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + + nxt200x_readbytes(state, 0x10, buf, 1); + buf[0] = 0x10; + nxt200x_writebytes(state, 0x10, buf, 1); + nxt200x_readbytes(state, 0x0A, buf, 1); + buf[0] = 0x21; + nxt200x_writebytes(state, 0x0A, buf, 1); + + nxt2004_microcontroller_init(state); + + buf[0] = 0x21; + nxt200x_writebytes(state, 0x0A, buf, 1); + buf[0] = 0x7E; + nxt200x_writebytes(state, 0xE9, buf, 1); + buf[0] = 0x00; + nxt200x_writebytes(state, 0xEA, buf, 1); + + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + + /* soft reset? */ + nxt200x_readreg_multibyte(state, 0x08, buf, 1); + buf[0] = 0x10; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + nxt200x_readreg_multibyte(state, 0x08, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x08, buf, 1); + + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x04; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x00; + nxt200x_writereg_multibyte(state, 0x81, buf, 1); + buf[0] = 0x80; buf[1] = 0x00; buf[2] = 0x00; + nxt200x_writereg_multibyte(state, 0x82, buf, 3); + + nxt200x_readreg_multibyte(state, 0x88, buf, 1); + buf[0] = 0x11; + nxt200x_writereg_multibyte(state, 0x88, buf, 1); + + nxt200x_readreg_multibyte(state, 0x80, buf, 1); + buf[0] = 0x44; + nxt200x_writereg_multibyte(state, 0x80, buf, 1); + + /* initialize tuner */ + nxt200x_readbytes(state, 0x10, buf, 1); + buf[0] = 0x12; + nxt200x_writebytes(state, 0x10, buf, 1); + buf[0] = 0x04; + nxt200x_writebytes(state, 0x13, buf, 1); + buf[0] = 0x00; + nxt200x_writebytes(state, 0x16, buf, 1); + buf[0] = 0x04; + nxt200x_writebytes(state, 0x14, buf, 1); + buf[0] = 0x00; + nxt200x_writebytes(state, 0x14, buf, 1); + nxt200x_writebytes(state, 0x17, buf, 1); + nxt200x_writebytes(state, 0x14, buf, 1); + nxt200x_writebytes(state, 0x17, buf, 1); + + return 0; +} + +static int nxt200x_init(struct dvb_frontend* fe) +{ + struct nxt200x_state* state = fe->demodulator_priv; + int ret = 0; + + if (!state->initialised) { + switch (state->demod_chip) { + case NXT2002: + ret = nxt2002_init(fe); + break; + case NXT2004: + ret = nxt2004_init(fe); + break; + default: + return -EINVAL; + break; + } + state->initialised = 1; + } + return ret; +} + +static int nxt200x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) +{ + fesettings->min_delay_ms = 500; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + +static void nxt200x_release(struct dvb_frontend* fe) +{ + struct nxt200x_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops nxt200x_ops; + +struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config, + struct i2c_adapter* i2c) +{ + struct nxt200x_state* state = NULL; + u8 buf [] = {0,0,0,0,0}; + + /* allocate memory for the internal state */ + state = (struct nxt200x_state*) kmalloc(sizeof(struct nxt200x_state), GFP_KERNEL); + if (state == NULL) + goto error; + memset(state,0,sizeof(*state)); + + /* setup the state */ + state->config = config; + state->i2c = i2c; + memcpy(&state->ops, &nxt200x_ops, sizeof(struct dvb_frontend_ops)); + state->initialised = 0; + + /* read card id */ + nxt200x_readbytes(state, 0x00, buf, 5); + dprintk("NXT info: %02X %02X %02X %02X %02X\n", + buf[0], buf[1], buf[2], buf[3], buf[4]); + + /* set demod chip */ + switch (buf[0]) { + case 0x04: + state->demod_chip = NXT2002; + printk("nxt200x: NXT2002 Detected\n"); + break; + case 0x05: + state->demod_chip = NXT2004; + printk("nxt200x: NXT2004 Detected\n"); + break; + default: + goto error; + } + + /* make sure demod chip is supported */ + switch (state->demod_chip) { + case NXT2002: + if (buf[0] != 0x04) goto error; /* device id */ + if (buf[1] != 0x02) goto error; /* fab id */ + if (buf[2] != 0x11) goto error; /* month */ + if (buf[3] != 0x20) goto error; /* year msb */ + if (buf[4] != 0x00) goto error; /* year lsb */ + break; + case NXT2004: + if (buf[0] != 0x05) goto error; /* device id */ + break; + default: + goto error; + } + + /* create dvb_frontend */ + state->frontend.ops = &state->ops; + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + printk("Unknown/Unsupported NXT chip: %02X %02X %02X %02X %02X\n", + buf[0], buf[1], buf[2], buf[3], buf[4]); + return NULL; +} + +static struct dvb_frontend_ops nxt200x_ops = { + + .info = { + .name = "Nextwave NXT200X VSB/QAM frontend", + .type = FE_ATSC, + .frequency_min = 54000000, + .frequency_max = 860000000, + .frequency_stepsize = 166666, /* stepsize is just a guess */ + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_8VSB | FE_CAN_QAM_64 | FE_CAN_QAM_256 + }, + + .release = nxt200x_release, + + .init = nxt200x_init, + .sleep = nxt200x_sleep, + + .set_frontend = nxt200x_setup_frontend_parameters, + .get_tune_settings = nxt200x_get_tune_settings, + + .read_status = nxt200x_read_status, + .read_ber = nxt200x_read_ber, + .read_signal_strength = nxt200x_read_signal_strength, + .read_snr = nxt200x_read_snr, + .read_ucblocks = nxt200x_read_ucblocks, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("NXT200X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver"); +MODULE_AUTHOR("Kirk Lapray, Jean-Francois Thibert, and Taylor Jacob"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(nxt200x_attach); + diff --git a/drivers/media/dvb/frontends/nxt200x.h b/drivers/media/dvb/frontends/nxt200x.h new file mode 100644 index 000000000000..1d9d70bc37ef --- /dev/null +++ b/drivers/media/dvb/frontends/nxt200x.h @@ -0,0 +1,61 @@ +/* + * Support for NXT2002 and NXT2004 - VSB/QAM + * + * Copyright (C) 2005 Kirk Lapray (kirk.lapray@gmail.com) + * based on nxt2002 by Taylor Jacob <rtjacob@earthlink.net> + * and nxt2004 by Jean-Francois Thibert (jeanfrancois@sagetv.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * +*/ + +#ifndef NXT200X_H +#define NXT200X_H + +#include <linux/dvb/frontend.h> +#include <linux/firmware.h> + +typedef enum nxt_chip_t { + NXTUNDEFINED, + NXT2002, + NXT2004 +}nxt_chip_type; + +struct nxt200x_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* tuner information */ + u8 pll_address; + struct dvb_pll_desc *pll_desc; + + /* used to set pll input */ + int (*set_pll_input)(u8* buf, int input); + + /* need to set device param for start_dma */ + int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); +}; + +extern struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config, + struct i2c_adapter* i2c); + +#endif /* NXT200X_H */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c index fc74c40d6477..78bded861d02 100644 --- a/drivers/media/dvb/frontends/or51132.c +++ b/drivers/media/dvb/frontends/or51132.c @@ -468,6 +468,7 @@ static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength) unsigned char snd_buf[2]; u8 rcvr_stat; u16 snr_equ; + u32 signal_strength; int usK; snd_buf[0]=0x04; @@ -503,7 +504,11 @@ static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength) usK = (rcvr_stat & 0x10) ? 3 : 0; /* The value reported back from the frontend will be FFFF=100% 0000=0% */ - *strength = (((8952 - i20Log10(snr_equ) - usK*100)/3+5)*65535)/1000; + signal_strength = (((8952 - i20Log10(snr_equ) - usK*100)/3+5)*65535)/1000; + if (signal_strength > 0xffff) + *strength = 0xffff; + else + *strength = signal_strength; dprintk("read_signal_strength %i\n",*strength); return 0; diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb/frontends/or51211.c index 8a9db23dd1b7..531f76246e5f 100644 --- a/drivers/media/dvb/frontends/or51211.c +++ b/drivers/media/dvb/frontends/or51211.c @@ -339,6 +339,7 @@ static int or51211_read_signal_strength(struct dvb_frontend* fe, u16* strength) u8 rec_buf[2]; u8 snd_buf[4]; u8 snr_equ; + u32 signal_strength; /* SNR after Equalizer */ snd_buf[0] = 0x04; @@ -358,8 +359,11 @@ static int or51211_read_signal_strength(struct dvb_frontend* fe, u16* strength) snr_equ = rec_buf[0] & 0xff; /* The value reported back from the frontend will be FFFF=100% 0000=0% */ - *strength = (((5334 - i20Log10(snr_equ))/3+5)*65535)/1000; - + signal_strength = (((5334 - i20Log10(snr_equ))/3+5)*65535)/1000; + if (signal_strength > 0xffff) + *strength = 0xffff; + else + *strength = signal_strength; dprintk("read_signal_strength %i\n",*strength); return 0; diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c index 889d9257215d..29c48665e130 100644 --- a/drivers/media/dvb/frontends/stv0299.c +++ b/drivers/media/dvb/frontends/stv0299.c @@ -64,8 +64,12 @@ struct stv0299_state { u32 tuner_frequency; u32 symbol_rate; fe_code_rate_t fec_inner; + int errmode; }; +#define STATUS_BER 0 +#define STATUS_UCBLOCKS 1 + static int debug; static int debug_legacy_dish_switch; #define dprintk(args...) \ @@ -383,36 +387,6 @@ static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltag }; } -static inline s32 stv0299_calc_usec_delay (struct timeval lasttime, struct timeval curtime) -{ - return ((curtime.tv_usec < lasttime.tv_usec) ? - 1000000 - lasttime.tv_usec + curtime.tv_usec : - curtime.tv_usec - lasttime.tv_usec); -} - -static void stv0299_sleep_until (struct timeval *waketime, u32 add_usec) -{ - struct timeval lasttime; - s32 delta, newdelta; - - waketime->tv_usec += add_usec; - if (waketime->tv_usec >= 1000000) { - waketime->tv_usec -= 1000000; - waketime->tv_sec++; - } - - do_gettimeofday (&lasttime); - delta = stv0299_calc_usec_delay (lasttime, *waketime); - if (delta > 2500) { - msleep ((delta - 1500) / 1000); - do_gettimeofday (&lasttime); - newdelta = stv0299_calc_usec_delay (lasttime, *waketime); - delta = (newdelta > delta) ? 0 : newdelta; - } - if (delta > 0) - udelay (delta); -} - static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, u32 cmd) { struct stv0299_state* state = fe->demodulator_priv; @@ -440,7 +414,7 @@ static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, u32 cmd) memcpy (&tv[0], &nexttime, sizeof (struct timeval)); stv0299_writeregI (state, 0x0c, reg0x0c | 0x50); /* set LNB to 18V */ - stv0299_sleep_until (&nexttime, 32000); + dvb_frontend_sleep_until(&nexttime, 32000); for (i=0; i<9; i++) { if (debug_legacy_dish_switch) @@ -454,13 +428,13 @@ static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, u32 cmd) cmd = cmd >> 1; if (i != 8) - stv0299_sleep_until (&nexttime, 8000); + dvb_frontend_sleep_until(&nexttime, 8000); } if (debug_legacy_dish_switch) { printk ("%s(%d): switch delay (should be 32k followed by all 8k\n", __FUNCTION__, fe->dvb->num); - for (i=1; i < 10; i++) - printk ("%d: %d\n", i, stv0299_calc_usec_delay (tv[i-1] , tv[i])); + for (i = 1; i < 10; i++) + printk ("%d: %d\n", i, timeval_usec_diff(tv[i-1] , tv[i])); } return 0; @@ -517,8 +491,7 @@ static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber) { struct stv0299_state* state = fe->demodulator_priv; - stv0299_writeregI(state, 0x34, (stv0299_readreg(state, 0x34) & 0xcf) | 0x10); - msleep(100); + if (state->errmode != STATUS_BER) return 0; *ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e); return 0; @@ -557,9 +530,8 @@ static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { struct stv0299_state* state = fe->demodulator_priv; - stv0299_writeregI(state, 0x34, (stv0299_readreg(state, 0x34) & 0xcf) | 0x30); - msleep(100); - *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e); + if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0; + else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e); return 0; } @@ -581,49 +553,14 @@ static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par if (state->config->invert) invval = (~invval) & 1; stv0299_writeregI(state, 0x0c, (stv0299_readreg(state, 0x0c) & 0xfe) | invval); - if (state->config->enhanced_tuning) { - /* check if we should do a finetune */ - int frequency_delta = p->frequency - state->tuner_frequency; - int minmax = p->u.qpsk.symbol_rate / 2000; - if (minmax < 5000) minmax = 5000; - - if ((frequency_delta > -minmax) && (frequency_delta < minmax) && (frequency_delta != 0) && - (state->fec_inner == p->u.qpsk.fec_inner) && - (state->symbol_rate == p->u.qpsk.symbol_rate)) { - int Drot_freq = (frequency_delta << 16) / (state->config->mclk / 1000); - - // zap the derotator registers first - stv0299_writeregI(state, 0x22, 0x00); - stv0299_writeregI(state, 0x23, 0x00); - - // now set them as we want - stv0299_writeregI(state, 0x22, Drot_freq >> 8); - stv0299_writeregI(state, 0x23, Drot_freq); - } else { - /* A "normal" tune is requested */ - stv0299_writeregI(state, 0x05, 0xb5); /* enable i2c repeater on stv0299 */ - state->config->pll_set(fe, state->i2c, p); - stv0299_writeregI(state, 0x05, 0x35); /* disable i2c repeater on stv0299 */ - - stv0299_writeregI(state, 0x32, 0x80); - stv0299_writeregI(state, 0x22, 0x00); - stv0299_writeregI(state, 0x23, 0x00); - stv0299_writeregI(state, 0x32, 0x19); - stv0299_set_symbolrate (fe, p->u.qpsk.symbol_rate); - stv0299_set_FEC (state, p->u.qpsk.fec_inner); - } - } else { - stv0299_writeregI(state, 0x05, 0xb5); /* enable i2c repeater on stv0299 */ - state->config->pll_set(fe, state->i2c, p); - stv0299_writeregI(state, 0x05, 0x35); /* disable i2c repeater on stv0299 */ + stv0299_writeregI(state, 0x05, 0xb5); /* enable i2c repeater on stv0299 */ + state->config->pll_set(fe, state->i2c, p); + stv0299_writeregI(state, 0x05, 0x35); /* disable i2c repeater on stv0299 */ - stv0299_set_FEC (state, p->u.qpsk.fec_inner); - stv0299_set_symbolrate (fe, p->u.qpsk.symbol_rate); - stv0299_writeregI(state, 0x22, 0x00); - stv0299_writeregI(state, 0x23, 0x00); - stv0299_readreg (state, 0x23); - stv0299_writeregI(state, 0x12, 0xb9); - } + stv0299_set_FEC (state, p->u.qpsk.fec_inner); + stv0299_set_symbolrate (fe, p->u.qpsk.symbol_rate); + stv0299_writeregI(state, 0x22, 0x00); + stv0299_writeregI(state, 0x23, 0x00); state->tuner_frequency = p->frequency; state->fec_inner = p->u.qpsk.fec_inner; @@ -708,6 +645,7 @@ struct dvb_frontend* stv0299_attach(const struct stv0299_config* config, state->tuner_frequency = 0; state->symbol_rate = 0; state->fec_inner = 0; + state->errmode = STATUS_BER; /* check if the demod is there */ stv0299_writeregI(state, 0x02, 0x34); /* standby off */ diff --git a/drivers/media/dvb/frontends/stv0299.h b/drivers/media/dvb/frontends/stv0299.h index d0c4484861e1..9af3d71c89db 100644 --- a/drivers/media/dvb/frontends/stv0299.h +++ b/drivers/media/dvb/frontends/stv0299.h @@ -73,9 +73,6 @@ struct stv0299_config /* does the inversion require inversion? */ u8 invert:1; - /* Should the enhanced tuning code be used? */ - u8 enhanced_tuning:1; - /* Skip reinitialisation? */ u8 skip_reinit:1; diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c index 3529c618f828..7968743826fc 100644 --- a/drivers/media/dvb/frontends/tda1004x.c +++ b/drivers/media/dvb/frontends/tda1004x.c @@ -420,7 +420,7 @@ static void tda10046_init_plls(struct dvb_frontend* fe) struct tda1004x_state* state = fe->demodulator_priv; tda1004x_write_byteI(state, TDA10046H_CONFPLL1, 0xf0); - tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10); // PLL M = 10 + tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x0a); // PLL M = 10 if (state->config->xtal_freq == TDA10046_XTAL_4M ) { dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __FUNCTION__); tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0 @@ -597,7 +597,10 @@ static int tda10046_init(struct dvb_frontend* fe) // Init the tuner PLL if (state->config->pll_init) { tda1004x_enable_tuner_i2c(state); - state->config->pll_init(fe); + if (state->config->pll_init(fe)) { + printk(KERN_ERR "tda1004x: pll init failed\n"); + return -EIO; + } tda1004x_disable_tuner_i2c(state); } @@ -667,7 +670,10 @@ static int tda1004x_set_fe(struct dvb_frontend* fe, // set frequency tda1004x_enable_tuner_i2c(state); - state->config->pll_set(fe, fe_params); + if (state->config->pll_set(fe, fe_params)) { + printk(KERN_ERR "tda1004x: pll set failed\n"); + return -EIO; + } tda1004x_disable_tuner_i2c(state); // Hardcoded to use auto as much as possible on the TDA10045 as it @@ -832,6 +838,8 @@ static int tda1004x_set_fe(struct dvb_frontend* fe, case TDA1004X_DEMOD_TDA10046: tda1004x_write_mask(state, TDA1004X_AUTO, 0x40, 0x40); + msleep(1); + tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 1); break; } @@ -1129,7 +1137,12 @@ static int tda1004x_sleep(struct dvb_frontend* fe) if (state->config->pll_sleep != NULL) { tda1004x_enable_tuner_i2c(state); state->config->pll_sleep(fe); - tda1004x_disable_tuner_i2c(state); + if (state->config->if_freq != TDA10046_FREQ_052) { + /* special hack for Philips EUROPA Based boards: + * keep the I2c bridge open for tuner access in analog mode + */ + tda1004x_disable_tuner_i2c(state); + } } tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1); break; diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c index 85b437bbddcd..bbebd1c4caca 100644 --- a/drivers/media/dvb/pluto2/pluto2.c +++ b/drivers/media/dvb/pluto2/pluto2.c @@ -286,15 +286,10 @@ static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets) * although one packet has been transfered. */ if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) { - unsigned int i = 0, valid; + unsigned int i = 0; while (pluto->dma_buf[i] == 0x47) i += 188; - valid = i / 188; - if (nbpackets != valid) { - dev_err(&pluto->pdev->dev, "nbpackets=%u valid=%u\n", - nbpackets, valid); - nbpackets = valid; - } + nbpackets = i / 188; } dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets); diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 22b203f8ff27..87ea52757a21 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -1566,7 +1566,7 @@ static u8 alps_bsru6_inittab[] = { 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ 0x10, 0x3f, // AGC2 0x3d 0x11, 0x84, - 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on + 0x12, 0xb9, 0x15, 0xc9, // lock detector threshold 0x16, 0x00, 0x17, 0x00, @@ -1644,7 +1644,6 @@ static struct stv0299_config alps_bsru6_config = { .inittab = alps_bsru6_inittab, .mclk = 88000000UL, .invert = 1, - .enhanced_tuning = 0, .skip_reinit = 0, .lock_output = STV0229_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP1, @@ -1669,7 +1668,7 @@ static u8 alps_bsbe1_inittab[] = { 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ 0x10, 0x3f, // AGC2 0x3d 0x11, 0x84, - 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on + 0x12, 0xb9, 0x15, 0xc9, // lock detector threshold 0x16, 0x00, 0x17, 0x00, @@ -1721,7 +1720,6 @@ static struct stv0299_config alps_bsbe1_config = { .inittab = alps_bsbe1_inittab, .mclk = 88000000UL, .invert = 1, - .enhanced_tuning = 0, .skip_reinit = 0, .min_delay_ms = 100, .set_symbol_rate = alps_bsru6_set_symbol_rate, diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c index 7692cd23f839..aa75dc03a0b3 100644 --- a/drivers/media/dvb/ttpci/budget-av.c +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -499,7 +499,7 @@ static u8 typhoon_cinergy1200s_inittab[] = { 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ 0x10, 0x3f, // AGC2 0x3d 0x11, 0x84, - 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on + 0x12, 0xb9, 0x15, 0xc9, // lock detector threshold 0x16, 0x00, 0x17, 0x00, @@ -531,7 +531,6 @@ static struct stv0299_config typhoon_config = { .inittab = typhoon_cinergy1200s_inittab, .mclk = 88000000UL, .invert = 0, - .enhanced_tuning = 0, .skip_reinit = 0, .lock_output = STV0229_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP0, @@ -546,7 +545,6 @@ static struct stv0299_config cinergy_1200s_config = { .inittab = typhoon_cinergy1200s_inittab, .mclk = 88000000UL, .invert = 0, - .enhanced_tuning = 0, .skip_reinit = 0, .lock_output = STV0229_LOCKOUTPUT_0, .volt13_op0_op1 = STV0299_VOLT13_OP0, diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index 51c30ba68140..75fb92d60998 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -490,7 +490,7 @@ static u8 alps_bsru6_inittab[] = { 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ 0x10, 0x3f, // AGC2 0x3d 0x11, 0x84, - 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on + 0x12, 0xb9, 0x15, 0xc9, // lock detector threshold 0x16, 0x00, 0x17, 0x00, @@ -580,7 +580,6 @@ static struct stv0299_config alps_bsru6_config = { .inittab = alps_bsru6_inittab, .mclk = 88000000UL, .invert = 1, - .enhanced_tuning = 0, .skip_reinit = 0, .lock_output = STV0229_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP1, @@ -710,7 +709,6 @@ static struct stv0299_config philips_su1278_tt_config = { .inittab = philips_su1278_tt_inittab, .mclk = 64000000UL, .invert = 0, - .enhanced_tuning = 1, .skip_reinit = 1, .lock_output = STV0229_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP1, diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index b1f21ef0e3b3..755df81cbc49 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -305,7 +305,7 @@ static u8 alps_bsru6_inittab[] = { 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ 0x10, 0x3f, // AGC2 0x3d 0x11, 0x84, - 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on + 0x12, 0xb9, 0x15, 0xc9, // lock detector threshold 0x16, 0x00, 0x17, 0x00, @@ -379,7 +379,6 @@ static struct stv0299_config alps_bsru6_config = { .inittab = alps_bsru6_inittab, .mclk = 88000000UL, .invert = 1, - .enhanced_tuning = 0, .skip_reinit = 0, .lock_output = STV0229_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP1, diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 43d6c8268642..4fd8bbc47037 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -226,12 +226,14 @@ static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend* fe, int arg) return 0; } -static void lnbp21_init(struct budget* budget) +static int lnbp21_init(struct budget* budget) { u8 buf = 0x00; struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = &buf, .len = sizeof(buf) }; - i2c_transfer (&budget->i2c_adap, &msg, 1); + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; } static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) @@ -273,7 +275,7 @@ static u8 alps_bsru6_inittab[] = { 0x01, 0x15, 0x02, 0x00, 0x03, 0x00, - 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ + 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ 0x06, 0x40, /* DAC not used, set to high impendance mode */ 0x07, 0x00, /* DAC LSB */ @@ -284,7 +286,7 @@ static u8 alps_bsru6_inittab[] = { 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ 0x10, 0x3f, // AGC2 0x3d 0x11, 0x84, - 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on + 0x12, 0xb9, 0x15, 0xc9, // lock detector threshold 0x16, 0x00, 0x17, 0x00, @@ -358,7 +360,6 @@ static struct stv0299_config alps_bsru6_config = { .inittab = alps_bsru6_inittab, .mclk = 88000000UL, .invert = 1, - .enhanced_tuning = 0, .skip_reinit = 0, .lock_output = STV0229_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP1, @@ -367,6 +368,79 @@ static struct stv0299_config alps_bsru6_config = { .pll_set = alps_bsru6_pll_set, }; +static u8 alps_bsbe1_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ + 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ + 0x06, 0x40, /* DAC not used, set to high impendance mode */ + 0x07, 0x00, /* DAC LSB */ + 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ + 0x09, 0x00, /* FIFO */ + 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ + 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ + 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ + 0x10, 0x3f, // AGC2 0x3d + 0x11, 0x84, + 0x12, 0xb9, + 0x15, 0xc9, // lock detector threshold + 0x16, 0x00, + 0x17, 0x00, + 0x18, 0x00, + 0x19, 0x00, + 0x1a, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 + 0x29, 0x1e, // 1/2 threshold + 0x2a, 0x14, // 2/3 threshold + 0x2b, 0x0f, // 3/4 threshold + 0x2c, 0x09, // 5/6 threshold + 0x2d, 0x05, // 7/8 threshold + 0x2e, 0x01, + 0x31, 0x1f, // test all FECs + 0x32, 0x19, // viterbi and synchro search + 0x33, 0xfc, // rs control + 0x34, 0x93, // error control + 0x0f, 0x92, // 0x80 = inverse AGC + 0xff, 0xff +}; + +static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params) +{ + int ret; + u8 data[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + + if ((params->frequency < 950000) || (params->frequency > 2150000)) + return -EINVAL; + + div = (params->frequency + (125 - 1)) / 125; // round correctly + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x80 | ((div & 0x18000) >> 10) | 4; + data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4; + + ret = i2c_transfer(i2c, &msg, 1); + return (ret != 1) ? -EIO : 0; +} + +static struct stv0299_config alps_bsbe1_config = { + .demod_address = 0x68, + .inittab = alps_bsbe1_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .min_delay_ms = 100, + .set_symbol_rate = alps_bsru6_set_symbol_rate, + .pll_set = alps_bsbe1_pll_set, +}; + static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { struct budget* budget = (struct budget*) fe->dvb->priv; @@ -500,6 +574,19 @@ static u8 read_pwm(struct budget* budget) static void frontend_init(struct budget *budget) { switch(budget->dev->pci->subsystem_device) { + case 0x1017: + // try the ALPS BSBE1 now + budget->dvb_frontend = stv0299_attach(&alps_bsbe1_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage; + budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage; + if (lnbp21_init(budget)) { + printk("%s: No LNBP21 found!\n", __FUNCTION__); + goto error_out; + } + } + + break; case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659)) case 0x1013: // try the ALPS BSRV2 first of all @@ -554,7 +641,10 @@ static void frontend_init(struct budget *budget) if (budget->dvb_frontend) { budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage; budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage; - lnbp21_init(budget); + if (lnbp21_init(budget)) { + printk("%s: No LNBP21 found!\n", __FUNCTION__); + goto error_out; + } break; } } @@ -566,13 +656,17 @@ static void frontend_init(struct budget *budget) budget->dev->pci->subsystem_vendor, budget->dev->pci->subsystem_device); } else { - if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) { - printk("budget: Frontend registration failed!\n"); - if (budget->dvb_frontend->ops->release) - budget->dvb_frontend->ops->release(budget->dvb_frontend); - budget->dvb_frontend = NULL; - } + if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) + goto error_out; } + return; + +error_out: + printk("budget: Frontend registration failed!\n"); + if (budget->dvb_frontend->ops->release) + budget->dvb_frontend->ops->release(budget->dvb_frontend); + budget->dvb_frontend = NULL; + return; } static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) @@ -618,6 +712,7 @@ static int budget_detach (struct saa7146_dev* dev) static struct saa7146_extension budget_extension; +MAKE_BUDGET_INFO(ttbs2, "TT-Budget/WinTV-NOVA-S PCI (rev AL/alps bsbe1 lnbp21 frontend)", BUDGET_TT); MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT); MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT); MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); @@ -630,6 +725,7 @@ static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004), MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005), MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013), + MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017), MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016), MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60), MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index d200ab0ad9e7..fd53d6010502 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -1198,7 +1198,7 @@ static u8 alps_bsbe1_inittab[] = { 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ 0x10, 0x3f, // AGC2 0x3d 0x11, 0x84, - 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on + 0x12, 0xb9, 0x15, 0xc9, // lock detector threshold 0x16, 0x00, 0x17, 0x00, @@ -1240,7 +1240,7 @@ static u8 alps_bsru6_inittab[] = { 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ 0x10, 0x3f, // AGC2 0x3d 0x11, 0x84, - 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on + 0x12, 0xb9, 0x15, 0xc9, // lock detector threshold 0x16, 0x00, 0x17, 0x00, @@ -1335,7 +1335,6 @@ static struct stv0299_config alps_stv0299_config = { .inittab = alps_bsru6_inittab, .mclk = 88000000UL, .invert = 1, - .enhanced_tuning = 0, .skip_reinit = 0, .lock_output = STV0229_LOCKOUTPUT_1, .volt13_op0_op1 = STV0299_VOLT13_OP1, diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index bbb989df4cf0..199b01188858 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -25,6 +25,16 @@ config VIDEO_BT848 To compile this driver as a module, choose M here: the module will be called bttv. +config VIDEO_BT848_DVB + tristate "DVB/ATSC Support for bt878 based TV cards" + depends on VIDEO_BT848 && DVB_CORE + select DVB_BT8XX + ---help--- + This adds support for DVB/ATSC cards based on the BT878 chip. + + To compile this driver as a module, choose M here: the + module will be called dvb-bt8xx. + config VIDEO_SAA6588 tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards" depends on VIDEO_DEV && I2C && VIDEO_BT848 @@ -243,29 +253,7 @@ config VIDEO_MEYE To compile this driver as a module, choose M here: the module will be called meye. -config VIDEO_SAA7134 - tristate "Philips SAA7134 support" - depends on VIDEO_DEV && PCI && I2C && SOUND - select VIDEO_BUF - select VIDEO_IR - select VIDEO_TUNER - select CRC32 - ---help--- - This is a video4linux driver for Philips SAA7130/7134 based - TV cards. - - To compile this driver as a module, choose M here: the - module will be called saa7134. - -config VIDEO_SAA7134_DVB - tristate "DVB Support for saa7134 based TV cards" - depends on VIDEO_SAA7134 && DVB_CORE - select VIDEO_BUF_DVB - select DVB_MT352 - select DVB_TDA1004X - ---help--- - This adds support for DVB cards based on the - Philips saa7134 chip. +source "drivers/media/video/saa7134/Kconfig" config VIDEO_MXB tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" @@ -316,34 +304,9 @@ config VIDEO_HEXIUM_GEMINI To compile this driver as a module, choose M here: the module will be called hexium_gemini. -config VIDEO_CX88 - tristate "Conexant 2388x (bt878 successor) support" - depends on VIDEO_DEV && PCI && I2C && EXPERIMENTAL - select I2C_ALGOBIT - select FW_LOADER - select VIDEO_BTCX - select VIDEO_BUF - select VIDEO_TUNER - select VIDEO_TVEEPROM - select VIDEO_IR - ---help--- - This is a video4linux driver for Conexant 2388x based - TV cards. +source "drivers/media/video/cx88/Kconfig" - To compile this driver as a module, choose M here: the - module will be called cx8800 - -config VIDEO_CX88_DVB - tristate "DVB Support for cx2388x based TV cards" - depends on VIDEO_CX88 && DVB_CORE - select VIDEO_BUF_DVB - select DVB_MT352 - select DVB_OR51132 - select DVB_CX22702 - select DVB_LGDT330X - ---help--- - This adds support for DVB/ATSC cards based on the - Connexant 2388x chip. +source "drivers/media/video/em28xx/Kconfig" config VIDEO_OVCAMCHIP tristate "OmniVision Camera Chip support" diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 046b82de9285..3ac465992400 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -5,7 +5,6 @@ bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o \ bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o zoran-objs := zr36120.o zr36120_i2c.o zr36120_mem.o -rds-objs := saa6588.o zr36067-objs := zoran_procfs.o zoran_device.o \ zoran_driver.o zoran_card.o tuner-objs := tuner-core.o tuner-simple.o mt20xx.o tda8290.o tea5767.o @@ -16,7 +15,7 @@ obj-$(CONFIG_VIDEO_BT848) += bttv.o msp3400.o tvaudio.o \ obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o obj-$(CONFIG_VIDEO_ZR36120) += zoran.o -obj-$(CONFIG_VIDEO_SAA6588) += rds.o +obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o obj-$(CONFIG_VIDEO_SAA5246A) += saa5246a.o obj-$(CONFIG_VIDEO_SAA5249) += saa5249.o obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o @@ -39,6 +38,8 @@ obj-$(CONFIG_VIDEO_CPIA_USB) += cpia_usb.o obj-$(CONFIG_VIDEO_MEYE) += meye.o obj-$(CONFIG_VIDEO_SAA7134) += saa7134/ obj-$(CONFIG_VIDEO_CX88) += cx88/ +obj-$(CONFIG_VIDEO_EM28XX) += em28xx/ +obj-$(CONFIG_VIDEO_EM28XX) += saa711x.o tvp5150.o obj-$(CONFIG_VIDEO_OVCAMCHIP) += ovcamchip/ obj-$(CONFIG_VIDEO_MXB) += saa7111.o tuner.o tda9840.o tea6415c.o tea6420.o mxb.o obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c index 0823ddaf7004..881cdcb1875d 100644 --- a/drivers/media/video/arv.c +++ b/drivers/media/video/arv.c @@ -22,7 +22,6 @@ #include <linux/init.h> #include <linux/devfs_fs_kernel.h> #include <linux/module.h> -#include <linux/version.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/fs.h> diff --git a/drivers/media/video/bt832.c b/drivers/media/video/bt832.c index 76c1b63ebdf2..e4063950ae57 100644 --- a/drivers/media/video/bt832.c +++ b/drivers/media/video/bt832.c @@ -32,7 +32,6 @@ #include <linux/slab.h> #include <media/audiochip.h> -#include <media/id.h> #include "bttv.h" #include "bt832.h" @@ -54,36 +53,36 @@ static struct i2c_driver driver; static struct i2c_client client_template; struct bt832 { - struct i2c_client client; + struct i2c_client client; }; int bt832_hexdump(struct i2c_client *i2c_client_s, unsigned char *buf) { int i,rc; buf[0]=0x80; // start at register 0 with auto-increment - if (1 != (rc = i2c_master_send(i2c_client_s,buf,1))) - printk("bt832: i2c i/o error: rc == %d (should be 1)\n",rc); + if (1 != (rc = i2c_master_send(i2c_client_s,buf,1))) + printk("bt832: i2c i/o error: rc == %d (should be 1)\n",rc); - for(i=0;i<65;i++) - buf[i]=0; - if (65 != (rc=i2c_master_recv(i2c_client_s,buf,65))) - printk("bt832: i2c i/o error: rc == %d (should be 65)\n",rc); + for(i=0;i<65;i++) + buf[i]=0; + if (65 != (rc=i2c_master_recv(i2c_client_s,buf,65))) + printk("bt832: i2c i/o error: rc == %d (should be 65)\n",rc); - // Note: On READ the first byte is the current index - // (e.g. 0x80, what we just wrote) + // Note: On READ the first byte is the current index + // (e.g. 0x80, what we just wrote) - if(1) { - int i; - printk("BT832 hexdump:\n"); - for(i=1;i<65;i++) { + if(1) { + int i; + printk("BT832 hexdump:\n"); + for(i=1;i<65;i++) { if(i!=1) { if(((i-1)%8)==0) printk(" "); - if(((i-1)%16)==0) printk("\n"); + if(((i-1)%16)==0) printk("\n"); } - printk(" %02x",buf[i]); - } - printk("\n"); - } + printk(" %02x",buf[i]); + } + printk("\n"); + } return 0; } @@ -102,13 +101,13 @@ int bt832_init(struct i2c_client *i2c_client_s) return 0; } - printk("Write 0 tp VPSTATUS\n"); - buf[0]=BT832_VP_STATUS; // Reg.52 - buf[1]= 0x00; - if (2 != (rc = i2c_master_send(i2c_client_s,buf,2))) - printk("bt832: i2c i/o error VPS: rc == %d (should be 2)\n",rc); + printk("Write 0 tp VPSTATUS\n"); + buf[0]=BT832_VP_STATUS; // Reg.52 + buf[1]= 0x00; + if (2 != (rc = i2c_master_send(i2c_client_s,buf,2))) + printk("bt832: i2c i/o error VPS: rc == %d (should be 2)\n",rc); - bt832_hexdump(i2c_client_s,buf); + bt832_hexdump(i2c_client_s,buf); // Leave low power mode: @@ -116,17 +115,17 @@ int bt832_init(struct i2c_client *i2c_client_s) buf[0]=BT832_CAM_SETUP0; //0x39 57 buf[1]=0x08; if (2 != (rc = i2c_master_send(i2c_client_s,buf,2))) - printk("bt832: i2c i/o error LLPM: rc == %d (should be 2)\n",rc); + printk("bt832: i2c i/o error LLPM: rc == %d (should be 2)\n",rc); - bt832_hexdump(i2c_client_s,buf); + bt832_hexdump(i2c_client_s,buf); printk("Write 0 tp VPSTATUS\n"); - buf[0]=BT832_VP_STATUS; // Reg.52 - buf[1]= 0x00; - if (2 != (rc = i2c_master_send(i2c_client_s,buf,2))) - printk("bt832: i2c i/o error VPS: rc == %d (should be 2)\n",rc); + buf[0]=BT832_VP_STATUS; // Reg.52 + buf[1]= 0x00; + if (2 != (rc = i2c_master_send(i2c_client_s,buf,2))) + printk("bt832: i2c i/o error VPS: rc == %d (should be 2)\n",rc); - bt832_hexdump(i2c_client_s,buf); + bt832_hexdump(i2c_client_s,buf); // Enable Output @@ -134,22 +133,22 @@ int bt832_init(struct i2c_client *i2c_client_s) buf[0]=BT832_VP_CONTROL1; // Reg.40 buf[1]= 0x27 & (~0x01); // Default | !skip if (2 != (rc = i2c_master_send(i2c_client_s,buf,2))) - printk("bt832: i2c i/o error EO: rc == %d (should be 2)\n",rc); + printk("bt832: i2c i/o error EO: rc == %d (should be 2)\n",rc); - bt832_hexdump(i2c_client_s,buf); + bt832_hexdump(i2c_client_s,buf); // for testing (even works when no camera attached) printk("bt832: *** Generate NTSC M Bars *****\n"); buf[0]=BT832_VP_TESTCONTROL0; // Reg. 42 buf[1]=3; // Generate NTSC System M bars, Generate Frame timing internally - if (2 != (rc = i2c_master_send(i2c_client_s,buf,2))) - printk("bt832: i2c i/o error MBAR: rc == %d (should be 2)\n",rc); + if (2 != (rc = i2c_master_send(i2c_client_s,buf,2))) + printk("bt832: i2c i/o error MBAR: rc == %d (should be 2)\n",rc); printk("Bt832: Camera Present: %s\n", (buf[1+BT832_CAM_STATUS] & BT832_56_CAMERA_PRESENT) ? "yes":"no"); - bt832_hexdump(i2c_client_s,buf); + bt832_hexdump(i2c_client_s,buf); kfree(buf); return 1; } @@ -162,17 +161,17 @@ static int bt832_attach(struct i2c_adapter *adap, int addr, int kind) printk("bt832_attach\n"); - client_template.adapter = adap; - client_template.addr = addr; + client_template.adapter = adap; + client_template.addr = addr; - printk("bt832: chip found @ 0x%x\n", addr<<1); + printk("bt832: chip found @ 0x%x\n", addr<<1); - if (NULL == (t = kmalloc(sizeof(*t), GFP_KERNEL))) - return -ENOMEM; + if (NULL == (t = kmalloc(sizeof(*t), GFP_KERNEL))) + return -ENOMEM; memset(t,0,sizeof(*t)); t->client = client_template; - i2c_set_clientdata(&t->client, t); - i2c_attach_client(&t->client); + i2c_set_clientdata(&t->client, t); + i2c_attach_client(&t->client); if(! bt832_init(&t->client)) { bt832_detach(&t->client); @@ -211,7 +210,7 @@ bt832_command(struct i2c_client *client, unsigned int cmd, void *arg) printk("bt832: command %x\n",cmd); - switch (cmd) { + switch (cmd) { case BT832_HEXDUMP: { unsigned char *buf; buf=kmalloc(65,GFP_KERNEL); diff --git a/drivers/media/video/bt832.h b/drivers/media/video/bt832.h index 9b6a8d2c96b5..1ce8fa71f7db 100644 --- a/drivers/media/video/bt832.h +++ b/drivers/media/video/bt832.h @@ -233,8 +233,8 @@ SetInterlaceMode( spec.interlace ); /* from web: Video Sampling Digital video is a sampled form of analog video. The most common sampling schemes in use today are: - Pixel Clock Horiz Horiz Vert - Rate Total Active + Pixel Clock Horiz Horiz Vert + Rate Total Active NTSC square pixel 12.27 MHz 780 640 525 NTSC CCIR-601 13.5 MHz 858 720 525 NTSC 4FSc 14.32 MHz 910 768 525 diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bttv-cards.c index 0881a17d5226..3413bace443a 100644 --- a/drivers/media/video/bttv-cards.c +++ b/drivers/media/video/bttv-cards.c @@ -6,7 +6,7 @@ like the big tvcards array for the most part Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) - & Marcus Metzler (mocm@thp.uni-koeln.de) + & Marcus Metzler (mocm@thp.uni-koeln.de) (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de> This program is free software; you can redistribute it and/or modify @@ -145,162 +145,163 @@ static struct CARD { int cardnr; char *name; } cards[] __devinitdata = { - { 0x13eb0070, BTTV_HAUPPAUGE878, "Hauppauge WinTV" }, - { 0x39000070, BTTV_HAUPPAUGE878, "Hauppauge WinTV-D" }, - { 0x45000070, BTTV_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" }, - { 0xff000070, BTTV_OSPREY1x0, "Osprey-100" }, - { 0xff010070, BTTV_OSPREY2x0_SVID,"Osprey-200" }, - { 0xff020070, BTTV_OSPREY500, "Osprey-500" }, - { 0xff030070, BTTV_OSPREY2000, "Osprey-2000" }, - { 0xff040070, BTTV_OSPREY540, "Osprey-540" }, - - { 0x00011002, BTTV_ATI_TVWONDER, "ATI TV Wonder" }, - { 0x00031002, BTTV_ATI_TVWONDERVE,"ATI TV Wonder/VE" }, - - { 0x6606107d, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" }, - { 0x6607107d, BTTV_WINFASTVC100, "Leadtek WinFast VC 100" }, - { 0x6609107d, BTTV_WINFAST2000, "Leadtek TV 2000 XP" }, - { 0x263610b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, - { 0x264510b4, BTTV_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, - { 0x402010fc, BTTV_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" }, - { 0x405010fc, BTTV_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" }, - { 0x407010fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, - { 0xd01810fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, - - { 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" }, + { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" }, + { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" }, + { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" }, + { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" }, + { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" }, + { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" }, + { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" }, + { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" }, + { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" }, + + { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" }, + { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" }, + + { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, + { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" }, + { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" }, + { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, + { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, + { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" }, + { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" }, + { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, + { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, + + { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, /* some cards ship with byteswapped IDs ... */ - { 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" }, - { 0xff00bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" }, + { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, + { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, /* this seems to happen as well ... */ - { 0xff1211bd, BTTV_PINNACLE, "Pinnacle PCTV" }, - - { 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" }, - { 0x263710b4, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" }, - { 0x3060121a, BTTV_STB2, "3Dfx VoodooTV 100/ STB OEM" }, - - { 0x3000144f, BTTV_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" }, - { 0xa005144f, BTTV_MAGICTVIEW063, "CPH06X TView99-Card" }, - { 0x3002144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" }, - { 0x3005144f, BTTV_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" }, - { 0x5000144f, BTTV_MAGICTVIEW061, "Askey CPH050" }, - { 0x300014ff, BTTV_MAGICTVIEW061, "TView 99 (CPH061)" }, - { 0x300214ff, BTTV_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" }, - - { 0x00011461, BTTV_AVPHONE98, "AVerMedia TVPhone98" }, - { 0x00021461, BTTV_AVERMEDIA98, "AVermedia TVCapture 98" }, - { 0x00031461, BTTV_AVPHONE98, "AVerMedia TVPhone98" }, - { 0x00041461, BTTV_AVERMEDIA98, "AVerMedia TVCapture 98" }, - { 0x03001461, BTTV_AVERMEDIA98, "VDOMATE TV TUNER CARD" }, - - { 0x1117153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" }, - { 0x1118153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" }, - { 0x1119153b, BTTV_TERRATVALUE, "Terratec TValue (Philips PAL I)" }, - { 0x111a153b, BTTV_TERRATVALUE, "Terratec TValue (Temic PAL I)" }, - - { 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" }, - { 0x1127153b, BTTV_TERRATV, "Terratec TV+ (V1.05)" }, + { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, + + { 0x3000121a, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" }, + { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" }, + { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" }, + + { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" }, + { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" }, + { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" }, + { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" }, + { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" }, + { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" }, + { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" }, + + { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, + { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" }, + { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, + { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" }, + { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" }, + + { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" }, + { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" }, + { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" }, + { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" }, + + { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" }, + { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" }, /* clashes with FlyVideo - *{ 0x18521852, BTTV_TERRATV, "Terratec TV+ (V1.10)" }, */ - { 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue (LR102)" }, - { 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */ - { 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" }, /* ?? */ - { 0xff3b153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */ - - { 0x400015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, - { 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, - { 0x400d15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, - { 0x401015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, - { 0x401615b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, - - { 0x1430aa00, BTTV_PV143, "Provideo PV143A" }, - { 0x1431aa00, BTTV_PV143, "Provideo PV143B" }, - { 0x1432aa00, BTTV_PV143, "Provideo PV143C" }, - { 0x1433aa00, BTTV_PV143, "Provideo PV143D" }, - { 0x1433aa03, BTTV_PV143, "Security Eyes" }, - - { 0x1460aa00, BTTV_PV150, "Provideo PV150A-1" }, - { 0x1461aa01, BTTV_PV150, "Provideo PV150A-2" }, - { 0x1462aa02, BTTV_PV150, "Provideo PV150A-3" }, - { 0x1463aa03, BTTV_PV150, "Provideo PV150A-4" }, - - { 0x1464aa04, BTTV_PV150, "Provideo PV150B-1" }, - { 0x1465aa05, BTTV_PV150, "Provideo PV150B-2" }, - { 0x1466aa06, BTTV_PV150, "Provideo PV150B-3" }, - { 0x1467aa07, BTTV_PV150, "Provideo PV150B-4" }, - - { 0xa132ff00, BTTV_IVC100, "IVC-100" }, - { 0xa1550000, BTTV_IVC200, "IVC-200" }, - { 0xa1550001, BTTV_IVC200, "IVC-200" }, - { 0xa1550002, BTTV_IVC200, "IVC-200" }, - { 0xa1550003, BTTV_IVC200, "IVC-200" }, - { 0xa1550100, BTTV_IVC200, "IVC-200G" }, - { 0xa1550101, BTTV_IVC200, "IVC-200G" }, - { 0xa1550102, BTTV_IVC200, "IVC-200G" }, - { 0xa1550103, BTTV_IVC200, "IVC-200G" }, - { 0xa182ff00, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff01, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff02, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff03, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff04, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff05, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff06, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff07, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff08, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff09, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff0a, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff0b, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff0c, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff0d, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff0e, BTTV_IVC120, "IVC-120G" }, - { 0xa182ff0f, BTTV_IVC120, "IVC-120G" }, - - { 0x41424344, BTTV_GRANDTEC, "GrandTec Multi Capture" }, - { 0x01020304, BTTV_XGUARD, "Grandtec Grand X-Guard" }, - - { 0x18501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, - { 0xa0501851, BTTV_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, - { 0x18511851, BTTV_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" }, - { 0x18521852, BTTV_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" }, - { 0x41a0a051, BTTV_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" }, - { 0x18501f7f, BTTV_FLYVIDEO_98, "Lifeview Flyvideo 98" }, - - { 0x010115cb, BTTV_GMV1, "AG GMV1" }, - { 0x010114c7, BTTV_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" }, - - { 0x10b42636, BTTV_HAUPPAUGE878, "STB ???" }, - { 0x217d6606, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" }, - { 0xfff6f6ff, BTTV_WINFAST2000, "Leadtek WinFast TV 2000" }, - { 0x03116000, BTTV_SENSORAY311, "Sensoray 311" }, - { 0x00790e11, BTTV_WINDVR, "Canopus WinDVR PCI" }, - { 0xa0fca1a0, BTTV_ZOLTRIX, "Face to Face Tvmax" }, - { 0x20007063, BTTV_PC_HDTV, "pcHDTV HD-2000 TV"}, - { 0x82b2aa6a, BTTV_SIMUS_GVC1100, "SIMUS GVC1100" }, - { 0x146caa0c, BTTV_PV951, "ituner spectra8" }, - { 0x200a1295, BTTV_PXC200, "ImageNation PXC200A" }, - - { 0x40111554, BTTV_PV_BT878P_9B, "Prolink Pixelview PV-BT" }, - { 0x17de0a01, BTTV_KWORLD, "Mecer TV/FM/Video Tuner" }, - - { 0x01051805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" }, - { 0x01061805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" }, - { 0x01071805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" }, - { 0x01081805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" }, - - { 0x15409511, BTTV_ACORP_Y878F, "Acorp Y878F" }, + *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */ + { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" }, + { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */ + { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */ + { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */ + + { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, + { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, + { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, + { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, + { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, + + { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" }, + { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" }, + { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" }, + { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" }, + { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" }, + + { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" }, + { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" }, + { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" }, + { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" }, + + { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" }, + { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" }, + { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" }, + { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" }, + + { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" }, + { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" }, + { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" }, + { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" }, + { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" }, + { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" }, + { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" }, + { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" }, + + { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" }, + { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" }, + + { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, + { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, + { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" }, + { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" }, + { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" }, + { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" }, + + { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" }, + { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" }, + + { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" }, + { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, + { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, + { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" }, + { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" }, + { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" }, + { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"}, + { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" }, + { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" }, + { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" }, + + { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" }, + { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" }, + + { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" }, + { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" }, + { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" }, + { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" }, + + { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" }, /* likely broken, vendor id doesn't match the other magic views ... - * { 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */ + * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */ /* DVB cards (using pci function .1 for mpeg data xfer) */ - { 0x01010071, BTTV_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, - { 0x07611461, BTTV_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, - { 0x001c11bd, BTTV_PINNACLESAT, "Pinnacle PCTV Sat" }, - { 0x002611bd, BTTV_TWINHAN_DST, "Pinnacle PCTV SAT CI" }, - { 0x00011822, BTTV_TWINHAN_DST, "Twinhan VisionPlus DVB" }, - { 0xfc00270f, BTTV_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" }, - { 0x07711461, BTTV_AVDVBT_771, "AVermedia AverTV DVB-T 771" }, - { 0xdb1018ac, BTTV_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" }, - { 0xd50018ac, BTTV_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, + { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, + { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, + { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" }, + { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" }, + { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" }, + { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" }, + { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" }, + { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" }, + { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, { 0, -1, NULL } }; @@ -309,2116 +310,2494 @@ static struct CARD { /* array with description for bt848 / bt878 tv/grabber cards */ struct tvcard bttv_tvcards[] = { -{ -/* ---- card 0x00 ---------------------------------- */ - .name = " *** UNKNOWN/GENERIC *** ", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .muxsel = { 2, 3, 1, 0}, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "MIRO PCTV", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 15, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 2, 0, 0, 0, 10}, - .needs_tvaudio = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Hauppauge (bt848)", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 7, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 1, 2, 3, 4}, - .needs_tvaudio = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "STB, Gateway P/N 6000699 (bt848)", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 7, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 4, 0, 2, 3, 1}, - .no_msp34xx = 1, - .needs_tvaudio = 1, - .tuner_type = TUNER_PHILIPS_NTSC, - .tuner_addr = ADDR_UNSET, - .pll = PLL_28, - .has_radio = 1, -},{ - -/* ---- card 0x04 ---------------------------------- */ - .name = "Intel Create and Share PCI/ Smart Video Recorder III", - .video_inputs = 4, - .audio_inputs = 0, - .tuner = -1, - .svhs = 2, - .gpiomask = 0, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0 }, - .needs_tvaudio = 0, - .tuner_type = 4, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Diamond DTV2000", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 3, - .muxsel = { 2, 3, 1, 0}, - .audiomux = { 0, 1, 0, 1, 3}, - .needs_tvaudio = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "AVerMedia TVPhone", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 3, - .muxsel = { 2, 3, 1, 1}, - .gpiomask = 0x0f, - .audiomux = { 0x0c, 0x04, 0x08, 0x04, 0}, - /* 0x04 for some cards ?? */ - .needs_tvaudio = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .audio_hook = avermedia_tvphone_audio, - .has_remote = 1, -},{ - .name = "MATRIX-Vision MV-Delta", - .video_inputs = 5, - .audio_inputs = 1, - .tuner = -1, - .svhs = 3, - .gpiomask = 0, - .muxsel = { 2, 3, 1, 0, 0}, - .audiomux = {0 }, - .needs_tvaudio = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x08 ---------------------------------- */ - .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0xc00, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0}, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "IMS/IXmicro TurboTV", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 3, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 1, 1, 2, 3, 0}, - .needs_tvaudio = 0, - .pll = PLL_28, - .tuner_type = TUNER_TEMIC_PAL, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Hauppauge (bt878)", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x0f, /* old: 7 */ - .muxsel = { 2, 0, 1, 1}, - .audiomux = { 0, 1, 2, 3, 4}, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "MIRO PCTV pro", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x3014f, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0x20001,0x10001, 0, 0,10}, - .needs_tvaudio = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x0c ---------------------------------- */ - .name = "ADS Technologies Channel Surfer TV (bt848)", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 15, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 13, 14, 11, 7, 0, 0}, - .needs_tvaudio = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "AVerMedia TVCapture 98", - .video_inputs = 3, - .audio_inputs = 4, - .tuner = 0, - .svhs = 2, - .gpiomask = 15, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 13, 14, 11, 7, 0, 0}, - .needs_tvaudio = 1, - .msp34xx_alt = 1, - .pll = PLL_28, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, - .audio_hook = avermedia_tv_stereo_audio, -},{ - .name = "Aimslab Video Highway Xtreme (VHX)", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 7, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */ - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Zoltrix TV-Max", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 15, - .muxsel = { 2, 3, 1, 1}, - .audiomux = {0 , 0, 1 , 0, 10}, - .needs_tvaudio = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x10 ---------------------------------- */ - .name = "Prolink Pixelview PlayTV (bt878)", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x01fe00, - .muxsel = { 2, 3, 1, 1}, - /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */ - .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 }, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = -1, -},{ - .name = "Leadtek WinView 601", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x8300f8, - .muxsel = { 2, 3, 1, 1,0}, - .audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007}, - .needs_tvaudio = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .audio_hook = winview_audio, - .has_radio = 1, -},{ - .name = "AVEC Intercapture", - .video_inputs = 3, - .audio_inputs = 2, - .tuner = 0, - .svhs = 2, - .gpiomask = 0, - .muxsel = {2, 3, 1, 1}, - .audiomux = {1, 0, 0, 0, 0}, - .needs_tvaudio = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = -1, - .svhs = -1, - .gpiomask = 0x8dff00, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0 }, - .no_msp34xx = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x14 ---------------------------------- */ - .name = "CEI Raffles Card", - .video_inputs = 3, - .audio_inputs = 3, - .tuner = 0, - .svhs = 2, - .muxsel = {2, 3, 1, 1}, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50", - .video_inputs = 4, - .audio_inputs = 2, /* tuner, line in */ - .tuner = 0, - .svhs = 2, - .gpiomask = 0x1800, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800}, - .pll = PLL_28, - .tuner_type = TUNER_PHILIPS_PAL_I, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Askey CPH050/ Phoebe Tv Master + FM", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0xc00, - .muxsel = { 2, 3, 1, 1}, - .audiomux = {0, 1, 0x800, 0x400, 0xc00, 0}, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = -1, - .gpiomask = 7, - .muxsel = { 2, 3, -1 }, - .digital_mode = DIGITAL_MODE_CAMERA, - .audiomux = { 0, 0, 0, 0, 0 }, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = TUNER_ALPS_TSBB5_PAL_I, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x18 ---------------------------------- */ - .name = "Askey CPH05X/06X (bt878) [many vendors]", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0xe00, - .muxsel = { 2, 3, 1, 1}, - .audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00}, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .has_remote = 1, -},{ - .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x1f0fff, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000}, - .needs_tvaudio = 0, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, - .audio_hook = terratv_audio, -},{ - .name = "Hauppauge WinCam newer (bt878)", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 3, - .gpiomask = 7, - .muxsel = { 2, 0, 1, 1}, - .audiomux = { 0, 1, 2, 3, 4}, - .needs_tvaudio = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50", - .video_inputs = 4, - .audio_inputs = 2, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x1800, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800}, - .pll = PLL_28, - .tuner_type = TUNER_PHILIPS_SECAM, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x1c ---------------------------------- */ - .name = "Terratec TerraTV+ Version 1.1 (bt878)", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x1f0fff, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000}, - .needs_tvaudio = 0, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, - .audio_hook = terratv_audio, - /* GPIO wiring: - External 20 pin connector (for Active Radio Upgrade board) - gpio00: i2c-sda - gpio01: i2c-scl - gpio02: om5610-data - gpio03: om5610-clk - gpio04: om5610-wre - gpio05: om5610-stereo - gpio06: rds6588-davn - gpio07: Pin 7 n.c. - gpio08: nIOW - gpio09+10: nIOR, nSEL ?? (bt878) - gpio09: nIOR (bt848) - gpio10: nSEL (bt848) - Sound Routing: - gpio16: u2-A0 (1st 4052bt) - gpio17: u2-A1 - gpio18: u2-nEN - gpio19: u4-A0 (2nd 4052) - gpio20: u4-A1 - u4-nEN - GND - Btspy: - 00000 : Cdrom (internal audio input) - 10000 : ext. Video audio input - 20000 : TV Mono - a0000 : TV Mono/2 - 1a0000 : TV Stereo - 30000 : Radio - 40000 : Mute -*/ - -},{ - /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */ - .name = "Imagenation PXC200", - .video_inputs = 5, - .audio_inputs = 1, - .tuner = -1, - .svhs = 1, /* was: 4 */ - .gpiomask = 0, - .muxsel = { 2, 3, 1, 0, 0}, - .audiomux = { 0 }, - .needs_tvaudio = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .muxsel_hook = PXC200_muxsel, - -},{ - .name = "Lifeview FlyVideo 98 LR50", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x1800, /* 0x8dfe00 */ - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 }, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Formac iProTV, Formac ProTV I (bt848)", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 3, - .gpiomask = 1, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 1, 0, 0, 0, 0 }, - .pll = PLL_28, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x20 ---------------------------------- */ - .name = "Intel Create and Share PCI/ Smart Video Recorder III", - .video_inputs = 4, - .audio_inputs = 0, - .tuner = -1, - .svhs = 2, - .gpiomask = 0, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0 }, - .needs_tvaudio = 0, - .tuner_type = 4, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Terratec TerraTValue Version Bt878", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0xffff00, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0x500, 0, 0x300, 0x900, 0x900}, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Leadtek WinFast 2000/ WinFast 2000 XP", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .muxsel = { 2, 3, 1, 1, 0}, /* TV, CVid, SVid, CVid over SVid connector */ - /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */ - .gpiomask = 0xb33000, - .audiomux = { 0x122000,0x1000,0x0000,0x620000,0x800000 }, - /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) - gpio23 -- hef4052:nEnable (0x800000) - gpio12 -- hef4052:A1 - gpio13 -- hef4052:A0 - 0x0000: external audio - 0x1000: FM - 0x2000: TV - 0x3000: n.c. - Note: There exists another variant "Winfast 2000" with tv stereo !? - Note: eeprom only contains FF and pci subsystem id 107d:6606 - */ - .needs_tvaudio = 0, - .pll = PLL_28, - .has_radio = 1, - .tuner_type = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */ - .tuner_addr = ADDR_UNSET, - .audio_hook = winfast2000_audio, - .has_remote = 1, -},{ - .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II", - .video_inputs = 4, - .audio_inputs = 3, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x1800, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800}, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x24 ---------------------------------- */ - .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner", - .video_inputs = 4, - .audio_inputs = 3, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x1800, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 }, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .has_radio = 1, -},{ - .name = "Prolink PixelView PlayTV pro", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0xff, - .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 }, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Askey CPH06X TView99", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x551e00, - .muxsel = { 2, 3, 1, 0}, - .audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 }, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = 1, - .tuner_addr = ADDR_UNSET, - .has_remote = 1, -},{ - .name = "Pinnacle PCTV Studio/Rave", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x03000F, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 2, 0xd0001, 0, 0, 1}, - .needs_tvaudio = 0, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x28 ---------------------------------- */ - .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 7, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 4, 0, 2, 3, 1}, - .no_msp34xx = 1, - .needs_tvaudio = 1, - .tuner_type = TUNER_PHILIPS_NTSC, - .tuner_addr = ADDR_UNSET, - .pll = PLL_28, - .has_radio = 1, -},{ - .name = "AVerMedia TVPhone 98", - .video_inputs = 3, - .audio_inputs = 4, - .tuner = 0, - .svhs = 2, - .gpiomask = 15, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 13, 4, 11, 7, 0, 0}, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .has_radio = 1, - .audio_hook = avermedia_tvphone_audio, -},{ - .name = "ProVideo PV951", /* pic16c54 */ - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 0, 0, 0, 0}, - .needs_tvaudio = 1, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = 1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Little OnAir TV", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0xe00b, - .muxsel = {2, 3, 1, 1}, - .audiomux = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc}, - .no_msp34xx = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x2c ---------------------------------- */ - .name = "Sigma TVII-FM", - .video_inputs = 2, - .audio_inputs = 1, - .tuner = 0, - .svhs = -1, - .gpiomask = 3, - .muxsel = {2, 3, 1, 1}, - .audiomux = {1, 1, 0, 2, 3}, - .no_msp34xx = 1, - .pll = PLL_NONE, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "MATRIX-Vision MV-Delta 2", - .video_inputs = 5, - .audio_inputs = 1, - .tuner = -1, - .svhs = 3, - .gpiomask = 0, - .muxsel = { 2, 3, 1, 0, 0}, - .audiomux = {0 }, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Zoltrix Genie TV/FM", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0xbcf03f, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f}, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = 21, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Terratec TV/Radio+", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x70000, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 }, - .needs_tvaudio = 1, - .no_msp34xx = 1, - .pll = PLL_35, - .tuner_type = 1, - .tuner_addr = ADDR_UNSET, - .has_radio = 1, -},{ - -/* ---- card 0x30 ---------------------------------- */ - .name = "Askey CPH03x/ Dynalink Magic TView", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 15, - .muxsel = { 2, 3, 1, 1}, - .audiomux = {2,0,0,0,1}, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "IODATA GV-BCTV3/PCI", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x010f00, - .muxsel = {2, 3, 0, 0}, - .audiomux = {0x10000, 0, 0x10000, 0, 0, 0}, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = TUNER_ALPS_TSHC6_NTSC, - .tuner_addr = ADDR_UNSET, - .audio_hook = gvbctv3pci_audio, -},{ - .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP", - .video_inputs = 5, - .audio_inputs = 1, - .tuner = 0, - .svhs = 3, - .gpiomask = 0xAA0000, - .muxsel = { 2,3,1,1,-1 }, - .digital_mode = DIGITAL_MODE_CAMERA, - .audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 }, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = TUNER_PHILIPS_PAL_I, - .tuner_addr = ADDR_UNSET, - .has_remote = 1, - /* GPIO wiring: (different from Rev.4C !) - GPIO17: U4.A0 (first hef4052bt) - GPIO19: U4.A1 - GPIO20: U5.A1 (second hef4052bt) - GPIO21: U4.nEN - GPIO22: BT832 Reset Line - GPIO23: A5,A0, U5,nEN - Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22 - */ -},{ - .name = "Eagle Wireless Capricorn2 (bt878A)", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 7, - .muxsel = { 2, 0, 1, 1}, - .audiomux = { 0, 1, 2, 3, 4}, - .pll = PLL_28, - .tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x34 ---------------------------------- */ - /* David Härdeman <david@2gen.com> */ - .name = "Pinnacle PCTV Studio Pro", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 3, - .gpiomask = 0x03000F, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 1, 0xd0001, 0, 0, 10}, - /* sound path (5 sources): - MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) - 0= ext. Audio IN - 1= from MUX2 - 2= Mono TV sound from Tuner - 3= not connected - MUX2 (mask 0x30000): - 0,2,3= from MSP34xx - 1= FM stereo Radio from Tuner */ - .needs_tvaudio = 0, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - /* Claas Langbehn <claas@bigfoot.com>, - Sven Grothklags <sven@upb.de> */ - .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS", - .video_inputs = 4, - .audio_inputs = 3, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x1c, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 0, 0x10, 8, 4 }, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, - .has_radio = 1, -},{ - /* Tim Röstermundt <rosterm@uni-muenster.de> - in de.comp.os.unix.linux.hardware: - options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 - audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff - options tuner type=5 */ - .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x18e0, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 }, - /* For cards with tda9820/tda9821: - 0x0000: Tuner normal stereo - 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) - 0x0880: Tuner A2 stereo */ - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - /* Miguel Angel Alvarez <maacruz@navegalia.com> - old Easy TV BT848 version (model CPH031) */ - .name = "Askey CPH031/ BESTBUY Easy TV", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0xF, - .muxsel = { 2, 3, 1, 0}, - .audiomux = { 2, 0, 0, 0, 10}, - .needs_tvaudio = 0, - .pll = PLL_28, - .tuner_type = TUNER_TEMIC_PAL, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x38 ---------------------------------- */ - /* Gordon Heydon <gjheydon@bigfoot.com ('98) */ - .name = "Lifeview FlyVideo 98FM LR50", - .video_inputs = 4, - .audio_inputs = 3, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x1800, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 }, - .pll = PLL_28, - .tuner_type = 5, - .tuner_addr = ADDR_UNSET, -},{ - /* This is the ultimate cheapo capture card - * just a BT848A on a small PCB! - * Steve Hosgood <steve@equiinet.com> */ - .name = "GrandTec 'Grand Video Capture' (Bt848)", - .video_inputs = 2, - .audio_inputs = 0, - .tuner = -1, - .svhs = 1, - .gpiomask = 0, - .muxsel = { 3, 1 }, - .audiomux = { 0 }, - .needs_tvaudio = 0, - .no_msp34xx = 1, - .pll = PLL_35, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - /* Daniel Herrington <daniel.herrington@home.com> */ - .name = "Askey CPH060/ Phoebe TV Master Only (No FM)", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0xe00, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 }, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = TUNER_TEMIC_4036FY5_NTSC, - .tuner_addr = ADDR_UNSET, -},{ - /* Matti Mottus <mottus@physic.ut.ee> */ - .name = "Askey CPH03x TV Capturer", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x03000F, - .muxsel = { 2, 3, 1, 0}, - .audiomux = { 2,0,0,0,1 }, - .pll = PLL_28, - .tuner_type = 0, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x3c ---------------------------------- */ - /* Philip Blundell <philb@gnu.org> */ - .name = "Modular Technology MM100PCTV", - .video_inputs = 2, - .audio_inputs = 2, - .tuner = 0, - .svhs = -1, - .gpiomask = 11, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 2, 0, 0, 1, 8}, - .pll = PLL_35, - .tuner_type = TUNER_TEMIC_PAL, - .tuner_addr = ADDR_UNSET, -},{ - /* Adrian Cox <adrian@humboldt.co.uk */ - .name = "AG Electronics GMV1", - .video_inputs = 2, - .audio_inputs = 0, - .tuner = -1, - .svhs = 1, - .gpiomask = 0xF, - .muxsel = { 2, 2}, - .audiomux = { }, - .no_msp34xx = 1, - .needs_tvaudio = 0, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - /* Miguel Angel Alvarez <maacruz@navegalia.com> - new Easy TV BT878 version (model CPH061) - special thanks to Informatica Mieres for providing the card */ - .name = "Askey CPH061/ BESTBUY Easy TV (bt878)", - .video_inputs = 3, - .audio_inputs = 2, - .tuner = 0, - .svhs = 2, - .gpiomask = 0xFF, - .muxsel = { 2, 3, 1, 0}, - .audiomux = { 1, 0, 4, 4, 9}, - .needs_tvaudio = 0, - .pll = PLL_28, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, -},{ - /* Lukas Gebauer <geby@volny.cz> */ - .name = "ATI TV-Wonder", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0xf03f, - .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe}, - .pll = PLL_28, - .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x40 ---------------------------------- */ - /* Lukas Gebauer <geby@volny.cz> */ - .name = "ATI TV-Wonder VE", - .video_inputs = 2, - .audio_inputs = 1, - .tuner = 0, - .svhs = -1, - .gpiomask = 1, - .muxsel = { 2, 3, 0, 1}, - .audiomux = { 0, 0, 1, 0, 0}, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, - .tuner_addr = ADDR_UNSET, -},{ - /* DeeJay <deejay@westel900.net (2000S) */ - .name = "Lifeview FlyVideo 2000S LR90", - .video_inputs = 3, - .audio_inputs = 3, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x18e0, - .muxsel = { 2, 3, 0, 1}, - /* Radio changed from 1e80 to 0x800 to make - FlyVideo2000S in .hu happy (gm)*/ - /* -dk-???: set mute=0x1800 for tda9874h daughterboard */ - .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 }, - .audio_hook = fv2000s_audio, - .no_msp34xx = 1, - .no_tda9875 = 1, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = 5, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Terratec TValueRadio", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0xffff00, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900}, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, - .has_radio = 1, -},{ - /* TANAKA Kei <peg00625@nifty.com> */ - .name = "IODATA GV-BCTV4/PCI", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x010f00, - .muxsel = {2, 3, 0, 0}, - .audiomux = {0x10000, 0, 0x10000, 0, 0, 0}, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, - .tuner_addr = ADDR_UNSET, - .audio_hook = gvbctv3pci_audio, -},{ - -/* ---- card 0x44 ---------------------------------- */ - .name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)", - /* try "insmod msp3400 simple=0" if you have - * sound problems with this card. */ - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = -1, - .gpiomask = 0x4f8a00, - /* 0x100000: 1=MSP enabled (0=disable again) - * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ - .audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff}, - /* tvtuner, radio, external,internal, mute, stereo - * tuner, Composit, SVid, Composit-on-Svid-adapter */ - .muxsel = { 2, 3 ,0 ,1}, - .tuner_type = TUNER_MT2032, - .tuner_addr = ADDR_UNSET, - .pll = PLL_28, - .has_radio = 1, -},{ - /* Philip Blundell <pb@nexus.co.uk> */ - .name = "Active Imaging AIMMS", - .video_inputs = 1, - .audio_inputs = 0, - .tuner = -1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .pll = PLL_28, - .muxsel = { 2 }, - .gpiomask = 0 -},{ - /* Tomasz Pyra <hellfire@sedez.iq.pl> */ - .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)", - .video_inputs = 3, - .audio_inputs = 4, - .tuner = 0, - .svhs = 2, - .gpiomask = 15, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 0, 11, 7, 13, 0}, /* TV and Radio with same GPIO ! */ - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = 25, - .tuner_addr = ADDR_UNSET, - .has_remote = 1, - /* GPIO wiring: - GPIO0: U4.A0 (hef4052bt) - GPIO1: U4.A1 - GPIO2: U4.A1 (second hef4052bt) - GPIO3: U4.nEN, U5.A0, A5.nEN - GPIO8-15: vrd866b ? + /* ---- card 0x00 ---------------------------------- */ + [BTTV_BOARD_UNKNOWN] = { + .name = " *** UNKNOWN/GENERIC *** ", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .muxsel = { 2, 3, 1, 0}, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MIRO] = { + .name = "MIRO PCTV", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 15, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 2, 0, 0, 0, 10}, + .needs_tvaudio = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_HAUPPAUGE] = { + .name = "Hauppauge (bt848)", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 7, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0, 1, 2, 3, 4}, + .needs_tvaudio = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_STB] = { + .name = "STB, Gateway P/N 6000699 (bt848)", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 7, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 4, 0, 2, 3, 1}, + .no_msp34xx = 1, + .needs_tvaudio = 1, + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + }, + + /* ---- card 0x04 ---------------------------------- */ + [BTTV_BOARD_INTEL] = { + .name = "Intel Create and Share PCI/ Smart Video Recorder III", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = -1, + .svhs = 2, + .gpiomask = 0, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0 }, + .needs_tvaudio = 0, + .tuner_type = 4, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_DIAMOND] = { + .name = "Diamond DTV2000", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 3, + .muxsel = { 2, 3, 1, 0}, + .audiomux = { 0, 1, 0, 1, 3}, + .needs_tvaudio = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_AVERMEDIA] = { + .name = "AVerMedia TVPhone", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 3, + .muxsel = { 2, 3, 1, 1}, + .gpiomask = 0x0f, + .audiomux = { 0x0c, 0x04, 0x08, 0x04, 0}, + /* 0x04 for some cards ?? */ + .needs_tvaudio = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .audio_hook = avermedia_tvphone_audio, + .has_remote = 1, + }, + [BTTV_BOARD_MATRIX_VISION] = { + .name = "MATRIX-Vision MV-Delta", + .video_inputs = 5, + .audio_inputs = 1, + .tuner = -1, + .svhs = 3, + .gpiomask = 0, + .muxsel = { 2, 3, 1, 0, 0}, + .audiomux = {0 }, + .needs_tvaudio = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x08 ---------------------------------- */ + [BTTV_BOARD_FLYVIDEO] = { + .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0xc00, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0, 0xc00, 0x800, 0x400, 0xc00, 0}, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TURBOTV] = { + .name = "IMS/IXmicro TurboTV", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 3, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 1, 1, 2, 3, 0}, + .needs_tvaudio = 0, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_HAUPPAUGE878] = { + .name = "Hauppauge (bt878)", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x0f, /* old: 7 */ + .muxsel = { 2, 0, 1, 1}, + .audiomux = { 0, 1, 2, 3, 4}, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MIROPRO] = { + .name = "MIRO PCTV pro", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x3014f, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0x20001,0x10001, 0, 0,10}, + .needs_tvaudio = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x0c ---------------------------------- */ + [BTTV_BOARD_ADSTECH_TV] = { + .name = "ADS Technologies Channel Surfer TV (bt848)", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 15, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 13, 14, 11, 7, 0, 0}, + .needs_tvaudio = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_AVERMEDIA98] = { + .name = "AVerMedia TVCapture 98", + .video_inputs = 3, + .audio_inputs = 4, + .tuner = 0, + .svhs = 2, + .gpiomask = 15, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 13, 14, 11, 7, 0, 0}, + .needs_tvaudio = 1, + .msp34xx_alt = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .audio_hook = avermedia_tv_stereo_audio, + .no_gpioirq = 1, + }, + [BTTV_BOARD_VHX] = { + .name = "Aimslab Video Highway Xtreme (VHX)", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 7, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0, 2, 1, 3, 4}, /* old: { 0, 1, 2, 3, 4} */ + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ZOLTRIX] = { + .name = "Zoltrix TV-Max", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 15, + .muxsel = { 2, 3, 1, 1}, + .audiomux = {0 , 0, 1 , 0, 10}, + .needs_tvaudio = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x10 ---------------------------------- */ + [BTTV_BOARD_PIXVIEWPLAYTV] = { + .name = "Prolink Pixelview PlayTV (bt878)", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x01fe00, + .muxsel = { 2, 3, 1, 1}, + #if 0 + /* old */ + .audiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 }, + #else + /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */ + .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 }, + #endif + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = -1, + }, + [BTTV_BOARD_WINVIEW_601] = { + .name = "Leadtek WinView 601", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x8300f8, + .muxsel = { 2, 3, 1, 1,0}, + .audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007}, + .needs_tvaudio = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .audio_hook = winview_audio, + .has_radio = 1, + }, + [BTTV_BOARD_AVEC_INTERCAP] = { + .name = "AVEC Intercapture", + .video_inputs = 3, + .audio_inputs = 2, + .tuner = 0, + .svhs = 2, + .gpiomask = 0, + .muxsel = {2, 3, 1, 1}, + .audiomux = {1, 0, 0, 0, 0}, + .needs_tvaudio = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_LIFE_FLYKIT] = { + .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = -1, + .svhs = -1, + .gpiomask = 0x8dff00, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0 }, + .no_msp34xx = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x14 ---------------------------------- */ + [BTTV_BOARD_CEI_RAFFLES] = { + .name = "CEI Raffles Card", + .video_inputs = 3, + .audio_inputs = 3, + .tuner = 0, + .svhs = 2, + .muxsel = {2, 3, 1, 1}, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_CONFERENCETV] = { + .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50", + .video_inputs = 4, + .audio_inputs = 2, /* tuner, line in */ + .tuner = 0, + .svhs = 2, + .gpiomask = 0x1800, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800}, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_PHOEBE_TVMAS] = { + .name = "Askey CPH050/ Phoebe Tv Master + FM", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0xc00, + .muxsel = { 2, 3, 1, 1}, + .audiomux = {0, 1, 0x800, 0x400, 0xc00, 0}, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MODTEC_205] = { + .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = -1, + .gpiomask = 7, + .muxsel = { 2, 3, -1 }, + .digital_mode = DIGITAL_MODE_CAMERA, + .audiomux = { 0, 0, 0, 0, 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ALPS_TSBB5_PAL_I, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x18 ---------------------------------- */ + [BTTV_BOARD_MAGICTVIEW061] = { + .name = "Askey CPH05X/06X (bt878) [many vendors]", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0xe00, + .muxsel = { 2, 3, 1, 1}, + .audiomux = {0x400, 0x400, 0x400, 0x400, 0xc00}, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_remote = 1, + }, + [BTTV_BOARD_VOBIS_BOOSTAR] = { + .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x1f0fff, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000}, + .needs_tvaudio = 0, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .audio_hook = terratv_audio, + }, + [BTTV_BOARD_HAUPPAUG_WCAM] = { + .name = "Hauppauge WinCam newer (bt878)", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 3, + .gpiomask = 7, + .muxsel = { 2, 0, 1, 1}, + .audiomux = { 0, 1, 2, 3, 4}, + .needs_tvaudio = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MAXI] = { + .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50", + .video_inputs = 4, + .audio_inputs = 2, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x1800, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800}, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_SECAM, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x1c ---------------------------------- */ + [BTTV_BOARD_TERRATV] = { + .name = "Terratec TerraTV+ Version 1.1 (bt878)", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x1f0fff, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000}, + .needs_tvaudio = 0, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .audio_hook = terratv_audio, + /* GPIO wiring: + External 20 pin connector (for Active Radio Upgrade board) + gpio00: i2c-sda + gpio01: i2c-scl + gpio02: om5610-data + gpio03: om5610-clk + gpio04: om5610-wre + gpio05: om5610-stereo + gpio06: rds6588-davn + gpio07: Pin 7 n.c. + gpio08: nIOW + gpio09+10: nIOR, nSEL ?? (bt878) + gpio09: nIOR (bt848) + gpio10: nSEL (bt848) + Sound Routing: + gpio16: u2-A0 (1st 4052bt) + gpio17: u2-A1 + gpio18: u2-nEN + gpio19: u4-A0 (2nd 4052) + gpio20: u4-A1 + u4-nEN - GND + Btspy: + 00000 : Cdrom (internal audio input) + 10000 : ext. Video audio input + 20000 : TV Mono + a0000 : TV Mono/2 + 1a0000 : TV Stereo + 30000 : Radio + 40000 : Mute */ -},{ - .name = "Lifeview FlyVideo 98EZ (capture only) LR51", - .video_inputs = 4, - .audio_inputs = 0, - .tuner = -1, - .svhs = 2, - .muxsel = { 2, 3, 1, 1}, /* AV1, AV2, SVHS, CVid adapter on SVHS */ - .pll = PLL_28, - .no_msp34xx = 1, - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, -},{ - -/* ---- card 0x48 ---------------------------------- */ - /* Dariusz Kowalewski <darekk@automex.pl> */ - .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x3f, - .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 }, - .needs_tvaudio = 1, - .no_msp34xx = 1, - .no_tda9875 = 1, - .pll = PLL_28, - .tuner_type = 5, - .tuner_addr = ADDR_UNSET, - .audio_hook = pvbt878p9b_audio, /* Note: not all cards have stereo */ - .has_radio = 1, /* Note: not all cards have radio */ - .has_remote = 1, - /* GPIO wiring: - GPIO0: A0 hef4052 - GPIO1: A1 hef4052 - GPIO3: nEN hef4052 - GPIO8-15: vrd866b - GPIO20,22,23: R30,R29,R28 - */ -},{ - /* Clay Kunz <ckunz@mail.arc.nasa.gov> */ - /* you must jumper JP5 for the card to work */ - .name = "Sensoray 311", - .video_inputs = 5, - .audio_inputs = 0, - .tuner = -1, - .svhs = 4, - .gpiomask = 0, - .muxsel = { 2, 3, 1, 0, 0}, - .audiomux = { 0 }, - .needs_tvaudio = 0, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - /* Miguel Freitas <miguel@cetuc.puc-rio.br> */ - .name = "RemoteVision MX (RV605)", - .video_inputs = 16, - .audio_inputs = 0, - .tuner = -1, - .svhs = -1, - .gpiomask = 0x00, - .gpiomask2 = 0x07ff, - .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03, - 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 }, - .no_msp34xx = 1, - .no_tda9875 = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .muxsel_hook = rv605_muxsel, -},{ - .name = "Powercolor MTV878/ MTV878R/ MTV878F", - .video_inputs = 3, - .audio_inputs = 2, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ - .muxsel = { 2, 1, 1, }, - .audiomux = { 0, 1, 2, 2, 4 }, - .needs_tvaudio = 0, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, - .pll = PLL_28, - .has_radio = 1, -},{ - -/* ---- card 0x4c ---------------------------------- */ - /* Masaki Suzuki <masaki@btree.org> */ - .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x140007, - .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 1, 2, 3, 4, 0 }, - .tuner_type = TUNER_PHILIPS_NTSC, - .tuner_addr = ADDR_UNSET, - .audio_hook = windvr_audio, -},{ - .name = "GrandTec Multi Capture Card (Bt878)", - .video_inputs = 4, - .audio_inputs = 0, - .tuner = -1, - .svhs = -1, - .gpiomask = 0, - .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0 }, - .needs_tvaudio = 0, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF", - .video_inputs = 4, - .audio_inputs = 3, - .tuner = 0, - .svhs = 2, - .gpiomask = 7, - .muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */ - .audiomux = { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio! - * This card lacks external Audio In, so we mute it on Ext. & Int. - * The PCB can take a sbx1637/sbx1673, wiring unknown. - * This card lacks PCI subsystem ID, sigh. - * audiomux=1: lower volume, 2+3: mute - * btwincap uses 0x80000/0x80003 - */ - .needs_tvaudio = 0, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = 5, - .tuner_addr = ADDR_UNSET, - /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and - radio signal strength indicators work fine. */ - .has_radio = 1, - /* GPIO Info: - GPIO0,1: HEF4052 A0,A1 - GPIO2: HEF4052 nENABLE - GPIO3-7: n.c. - GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card] - GPIO14,15: ?? - GPIO16-21: n.c. - GPIO22,23: ?? - ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/ -},{ - /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */ - .name = "DSP Design TCVIDEO", - .video_inputs = 4, - .svhs = -1, - .muxsel = { 2, 3, 1, 0}, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - - /* ---- card 0x50 ---------------------------------- */ - .name = "Hauppauge WinTV PVR", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .muxsel = { 2, 0, 1, 1}, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - - .gpiomask = 7, - .audiomux = {7}, -},{ - .name = "IODATA GV-BCTV5/PCI", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x0f0f80, - .muxsel = {2, 3, 1, 0}, - .audiomux = {0x030000, 0x010000, 0, 0, 0x020000, 0}, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = TUNER_PHILIPS_NTSC_M, - .tuner_addr = ADDR_UNSET, - .audio_hook = gvbctv5pci_audio, - .has_radio = 1, -},{ - .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */ - .video_inputs = 4, /* id-inputs-clock */ - .audio_inputs = 0, - .tuner = -1, - .svhs = 3, - .muxsel = { 3, 2, 0, 1 }, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, -},{ - .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */ - .video_inputs = 3, - .audio_inputs = 0, - .tuner = -1, - .svhs = 2, - .muxsel = { 2, 3, 1 }, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, -},{ - - /* ---- card 0x54 ---------------------------------- */ - .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */ - .video_inputs = 2, - .audio_inputs = 0, - .tuner = -1, - .svhs = 1, - .muxsel = { 3, 1 }, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, -},{ - .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */ - .video_inputs = 1, - .audio_inputs = 0, - .tuner = -1, - .svhs = -1, - .muxsel = { 0 }, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, -},{ - .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */ - .video_inputs = 2, - .audio_inputs = 0, - .tuner = -1, - .svhs = 1, - .muxsel = { 0, 1 }, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, -},{ - .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */ - .video_inputs = 1, - .audio_inputs = 1, - .tuner = -1, - .svhs = -1, - .muxsel = { 0 }, - .pll = PLL_28, - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, -},{ - - /* ---- card 0x58 ---------------------------------- */ - .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */ - .video_inputs = 2, - .audio_inputs = 1, - .tuner = -1, - .svhs = 1, - .muxsel = { 0, 1 }, - .pll = PLL_28, - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, -},{ - .name = "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */ - .video_inputs = 2, - .audio_inputs = 1, - .tuner = -1, - .svhs = 1, - .muxsel = { 2, 3 }, - .pll = PLL_28, - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, -},{ - .name = "Osprey 500", /* 500 */ - .video_inputs = 2, - .audio_inputs = 1, - .tuner = -1, - .svhs = 1, - .muxsel = { 2, 3 }, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, -},{ - .name = "Osprey 540", /* 540 */ - .video_inputs = 4, - .audio_inputs = 1, - .tuner = -1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, -},{ - - /* ---- card 0x5C ---------------------------------- */ - .name = "Osprey 2000", /* 2000 */ - .video_inputs = 2, - .audio_inputs = 1, - .tuner = -1, - .svhs = 1, - .muxsel = { 2, 3 }, - .pll = PLL_28, - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ -},{ - /* M G Berberich <berberic@forwiss.uni-passau.de> */ - .name = "IDS Eagle", - .video_inputs = 4, - .audio_inputs = 0, - .tuner = -1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .svhs = -1, - .gpiomask = 0, - .muxsel = { 0, 1, 2, 3 }, - .muxsel_hook = eagle_muxsel, - .no_msp34xx = 1, - .no_tda9875 = 1, - .pll = PLL_28, -},{ - .name = "Pinnacle PCTV Sat", - .video_inputs = 2, - .audio_inputs = 0, - .svhs = 1, - .tuner = -1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, - .gpiomask = 0x01, - .audiomux = { 0, 0, 0, 0, 1 }, - .muxsel = { 3, 0, 1, 2}, - .needs_tvaudio = 0, - .pll = PLL_28, - .no_gpioirq = 1, - .has_dvb = 1, -},{ - .name = "Formac ProTV II (bt878)", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 3, - .gpiomask = 2, - /* TV, Comp1, Composite over SVID con, SVID */ - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 2, 2, 0, 0, 0 }, - .pll = PLL_28, - .has_radio = 1, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, -/* sound routing: - GPIO=0x00,0x01,0x03: mute (?) - 0x02: both TV and radio (tuner: FM1216/I) - The card has onboard audio connectors labeled "cdrom" and "board", - not soldered here, though unknown wiring. - Card lacks: external audio in, pci subsystem id. -*/ -},{ - - /* ---- card 0x60 ---------------------------------- */ - .name = "MachTV", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = -1, - .gpiomask = 7, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 1, 2, 3, 4}, - .needs_tvaudio = 1, - .tuner_type = 5, - .tuner_addr = ADDR_UNSET, - .pll = 1, -},{ - .name = "Euresys Picolo", - .video_inputs = 3, - .audio_inputs = 0, - .tuner = -1, - .svhs = 2, - .gpiomask = 0, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, - .muxsel = { 2, 0, 1}, - .pll = PLL_28, - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, -},{ - /* Luc Van Hoeylandt <luc@e-magic.be> */ - .name = "ProVideo PV150", /* 0x4f */ - .video_inputs = 2, - .audio_inputs = 0, - .tuner = -1, - .svhs = -1, - .gpiomask = 0, - .muxsel = { 2, 3 }, - .audiomux = { 0 }, - .needs_tvaudio = 0, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, -},{ - /* Hiroshi Takekawa <sian@big.or.jp> */ - /* This card lacks subsystem ID */ - .name = "AD-TVK503", /* 0x63 */ - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x001e8007, - .muxsel = { 2, 3, 1, 0 }, - /* Tuner, Radio, external, internal, off, on */ - .audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 }, - .needs_tvaudio = 0, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = 2, - .tuner_addr = ADDR_UNSET, - .audio_hook = adtvk503_audio, -},{ - - /* ---- card 0x64 ---------------------------------- */ - .name = "Hercules Smart TV Stereo", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x00, - .muxsel = { 2, 3, 1, 1 }, - .needs_tvaudio = 1, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = 5, - .tuner_addr = ADDR_UNSET, - /* Notes: - - card lacks subsystem ID - - stereo variant w/ daughter board with tda9874a @0xb0 - - Audio Routing: - always from tda9874 independent of GPIO (?) - external line in: unknown - - Other chips: em78p156elp @ 0x96 (probably IR remote control) - hef4053 (instead 4052) for unknown function - */ -},{ - .name = "Pace TV & Radio Card", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .muxsel = { 2, 3, 1, 1}, /* Tuner, CVid, SVid, CVid over SVid connector */ - .gpiomask = 0, - .no_tda9875 = 1, - .no_tda7432 = 1, - .tuner_type = 1, - .tuner_addr = ADDR_UNSET, - .has_radio = 1, - .pll = PLL_28, - /* Bt878, Bt832, FI1246 tuner; no pci subsystem id - only internal line out: (4pin header) RGGL - Radio must be decoded by msp3410d (not routed through)*/ - /* - .digital_mode = DIGITAL_MODE_CAMERA, todo! - */ -},{ - /* Chris Willing <chris@vislab.usyd.edu.au> */ - .name = "IVC-200", - .video_inputs = 1, - .audio_inputs = 0, - .tuner = -1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .svhs = -1, - .gpiomask = 0xdf, - .muxsel = { 2 }, - .pll = PLL_28, -},{ - .name = "Grand X-Guard / Trust 814PCI", - .video_inputs = 16, - .audio_inputs = 0, - .tuner = -1, - .svhs = -1, - .tuner_type = 4, - .tuner_addr = ADDR_UNSET, - .gpiomask2 = 0xff, - .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 }, - .muxsel_hook = xguard_muxsel, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, - .pll = PLL_28, -},{ - - /* ---- card 0x68 ---------------------------------- */ - .name = "Nebula Electronics DigiTV", - .video_inputs = 1, - .tuner = -1, - .svhs = -1, - .muxsel = { 2, 3, 1, 0}, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .has_dvb = 1, - .no_gpioirq = 1, -},{ - /* Jorge Boncompte - DTI2 <jorge@dti2.net> */ - .name = "ProVideo PV143", - .video_inputs = 4, - .audio_inputs = 0, - .tuner = -1, - .svhs = -1, - .gpiomask = 0, - .muxsel = { 2, 3, 1, 0 }, - .audiomux = { 0 }, - .needs_tvaudio = 0, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - /* M.Klahr@phytec.de */ - .name = "PHYTEC VD-009-X1 MiniDIN (bt878)", - .video_inputs = 4, - .audio_inputs = 0, - .tuner = -1, /* card has no tuner */ - .svhs = 3, - .gpiomask = 0x00, - .muxsel = { 2, 3, 1, 0}, - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "PHYTEC VD-009-X1 Combi (bt878)", - .video_inputs = 4, - .audio_inputs = 0, - .tuner = -1, /* card has no tuner */ - .svhs = 3, - .gpiomask = 0x00, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - - /* ---- card 0x6c ---------------------------------- */ - .name = "PHYTEC VD-009 MiniDIN (bt878)", - .video_inputs = 10, - .audio_inputs = 0, - .tuner = -1, /* card has no tuner */ - .svhs = 9, - .gpiomask = 0x00, - .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio - via the upper nibble of muxsel. here: used for - xternal video-mux */ - .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 }, - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "PHYTEC VD-009 Combi (bt878)", - .video_inputs = 10, - .audio_inputs = 0, - .tuner = -1, /* card has no tuner */ - .svhs = 9, - .gpiomask = 0x00, - .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio - via the upper nibble of muxsel. here: used for - xternal video-mux */ - .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 }, - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - .name = "IVC-100", - .video_inputs = 4, - .audio_inputs = 0, - .tuner = -1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .svhs = -1, - .gpiomask = 0xdf, - .muxsel = { 2, 3, 1, 0 }, - .pll = PLL_28, -},{ - /* IVC-120G - Alan Garfield <alan@fromorbit.com> */ - .name = "IVC-120G", - .video_inputs = 16, - .audio_inputs = 0, /* card has no audio */ - .tuner = -1, /* card has no tuner */ - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .svhs = -1, /* card has no svhs */ - .needs_tvaudio = 0, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, - .gpiomask = 0x00, - .muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, - 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 }, - .muxsel_hook = ivc120_muxsel, - .pll = PLL_28, -},{ - - /* ---- card 0x70 ---------------------------------- */ - .name = "pcHDTV HD-2000 TV", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .muxsel = { 2, 3, 1, 0}, - .tuner_type = TUNER_PHILIPS_ATSC, - .tuner_addr = ADDR_UNSET, - .has_dvb = 1, -},{ - .name = "Twinhan DST + clones", - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, - .tuner_type = TUNER_ABSENT, - .tuner_addr = ADDR_UNSET, - .no_video = 1, - .has_dvb = 1, -},{ - .name = "Winfast VC100", - .video_inputs = 3, - .audio_inputs = 0, - .svhs = 1, - .tuner = -1, - .muxsel = { 3, 1, 1, 3}, /* Vid In, SVid In, Vid over SVid in connector */ - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, - .tuner_type = TUNER_ABSENT, - .tuner_addr = ADDR_UNSET, - .pll = PLL_28, -},{ - .name = "Teppro TEV-560/InterVision IV-560", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 3, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 1, 1, 1, 1, 0}, - .needs_tvaudio = 1, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, - .pll = PLL_35, -},{ - - /* ---- card 0x74 ---------------------------------- */ - .name = "SIMUS GVC1100", - .video_inputs = 4, - .audio_inputs = 0, - .tuner = -1, - .svhs = -1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .pll = PLL_28, - .muxsel = { 2, 2, 2, 2}, - .gpiomask = 0x3F, - .muxsel_hook = gvc1100_muxsel, -},{ - /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */ - .name = "NGS NGSTV+", - .video_inputs = 3, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x008007, - .muxsel = {2, 3, 0, 0}, - .audiomux = {0, 0, 0, 0, 0x000003, 0}, - .pll = PLL_28, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, - .has_remote = 1, -},{ - /* http://linuxmedialabs.com */ - .name = "LMLBT4", - .video_inputs = 4, /* IN1,IN2,IN3,IN4 */ - .audio_inputs = 0, - .tuner = -1, - .svhs = -1, - .muxsel = { 2, 3, 1, 0 }, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, - .needs_tvaudio = 0, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - /* Helmroos Harri <harri.helmroos@pp.inet.fi> */ - .name = "Tekram M205 PRO", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, - .svhs = 2, - .needs_tvaudio = 0, - .gpiomask = 0x68, - .muxsel = { 2, 3, 1}, - .audiomux = { 0x68, 0x68, 0x61, 0x61, 0x00 }, - .pll = PLL_28, -},{ - - /* ---- card 0x78 ---------------------------------- */ - /* Javier Cendan Ares <jcendan@lycos.es> */ - /* bt878 TV + FM without subsystem ID */ - .name = "Conceptronic CONTVFMi", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x008007, - .muxsel = { 2, 3, 1, 1 }, - .audiomux = { 0, 1, 2, 2, 3 }, - .needs_tvaudio = 0, - .pll = PLL_28, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, - .has_remote = 1, - .has_radio = 1, -},{ - /*Eric DEBIEF <debief@telemsa.com>*/ - /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/ - /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_PICOLO_TETRA_CHIP*/ - /*0x79 in bttv.h*/ - .name = "Euresys Picolo Tetra", - .video_inputs = 4, - .audio_inputs = 0, - .tuner = -1, - .svhs = -1, - .gpiomask = 0, - .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/ - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, - .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/ - .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ - .pll = PLL_28, - .needs_tvaudio = 0, - .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - /* Spirit TV Tuner from http://spiritmodems.com.au */ - /* Stafford Goodsell <surge@goliath.homeunix.org> */ - .name = "Spirit TV Tuner", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x0000000f, - .muxsel = { 2, 1, 1 }, - .audiomux = { 0x02, 0x00, 0x00, 0x00, 0x00}, - .tuner_type = TUNER_TEMIC_PAL, - .tuner_addr = ADDR_UNSET, - .no_msp34xx = 1, - .no_tda9875 = 1, -},{ - /* Wolfram Joost <wojo@frokaschwei.de> */ - .name = "AVerMedia AVerTV DVB-T 771", - .video_inputs = 2, - .svhs = 1, - .tuner = -1, - .tuner_type = TUNER_ABSENT, - .tuner_addr = ADDR_UNSET, - .muxsel = { 3 , 3 }, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, - .pll = PLL_28, - .has_dvb = 1, - .no_gpioirq = 1, - .has_remote = 1, -},{ - /* ---- card 0x7c ---------------------------------- */ - /* Matt Jesson <dvb@jesson.eclipse.co.uk> */ - /* Based on the Nebula card data - added remote and new card number - BTTV_AVDVBT_761, see also ir-kbd-gpio.c */ - .name = "AverMedia AverTV DVB-T 761", - .video_inputs = 2, - .tuner = -1, - .svhs = 1, - .muxsel = { 3, 1, 2, 0}, /* Comp0, S-Video, ?, ? */ - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .has_dvb = 1, - .no_gpioirq = 1, - .has_remote = 1, -},{ - /* andre.schwarz@matrix-vision.de */ - .name = "MATRIX Vision Sigma-SQ", - .video_inputs = 16, - .audio_inputs = 0, - .tuner = -1, - .svhs = -1, - .gpiomask = 0x0, - .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, - 3, 3, 3, 3, 3, 3, 3, 3 }, - .muxsel_hook = sigmaSQ_muxsel, - .audiomux = { 0 }, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - /* andre.schwarz@matrix-vision.de */ - .name = "MATRIX Vision Sigma-SLC", - .video_inputs = 4, - .audio_inputs = 0, - .tuner = -1, - .svhs = -1, - .gpiomask = 0x0, - .muxsel = { 2, 2, 2, 2 }, - .muxsel_hook = sigmaSLC_muxsel, - .audiomux = { 0 }, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - /* BTTV_APAC_VIEWCOMP */ - /* Attila Kondoros <attila.kondoros@chello.hu> */ - /* bt878 TV + FM 0x00000000 subsystem ID */ - .name = "APAC Viewcomp 878(AMAX)", - .video_inputs = 2, - .audio_inputs = 1, - .tuner = 0, - .svhs = -1, - .gpiomask = 0xFF, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 2, 0, 0, 0, 10}, - .needs_tvaudio = 0, - .pll = PLL_28, - .tuner_type = TUNER_PHILIPS_PAL, - .tuner_addr = ADDR_UNSET, - .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */ - .has_radio = 1, /* not every card has radio */ -},{ - - /* ---- card 0x80 ---------------------------------- */ - /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */ - .name = "DViCO FusionHDTV DVB-T Lite", - .tuner = -1, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, - .pll = PLL_28, - .no_video = 1, - .has_dvb = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, -},{ - /* Steven <photon38@pchome.com.tw> */ - .name = "V-Gear MyVCD", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x3f, - .muxsel = {2, 3, 1, 0}, - .audiomux = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31}, - .no_msp34xx = 1, - .pll = PLL_28, - .tuner_type = TUNER_PHILIPS_NTSC_M, - .tuner_addr = ADDR_UNSET, - .has_radio = 0, -},{ - /* Rick C <cryptdragoon@gmail.com> */ - .name = "Super TV Tuner", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .muxsel = { 2, 3, 1, 0}, - .tuner_type = TUNER_PHILIPS_NTSC, - .tuner_addr = ADDR_UNSET, - .gpiomask = 0x008007, - .audiomux = { 0, 0x000001,0,0, 0}, - .needs_tvaudio = 1, - .has_radio = 1, -},{ - /* Chris Fanning <video4linux@haydon.net> */ - .name = "Tibet Systems 'Progress DVR' CS16", - .video_inputs = 16, - .audio_inputs = 0, - .tuner = -1, - .svhs = -1, - .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 }, - .pll = PLL_28, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .muxsel_hook = tibetCS16_muxsel, -}, -{ - /* Bill Brack <wbrack@mmm.com.hk> */ - /* - * Note that, because of the card's wiring, the "master" - * BT878A chip (i.e. the one which controls the analog switch - * and must use this card type) is the 2nd one detected. The - * other 3 chips should use card type 0x85, whose description - * follows this one. There is a EEPROM on the card (which is - * connected to the I2C of one of those other chips), but is - * not currently handled. There is also a facility for a - * "monitor", which is also not currently implemented. - */ - .name = "Kodicom 4400R (master)", - .video_inputs = 16, - .audio_inputs = 0, - .tuner = -1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .svhs = -1, - /* GPIO bits 0-9 used for analog switch: - * 00 - 03: camera selector - * 04 - 06: channel (controller) selector - * 07: data (1->on, 0->off) - * 08: strobe - * 09: reset - * bit 16 is input from sync separator for the channel - */ - .gpiomask = 0x0003ff, - .no_gpioirq = 1, - .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 }, - .pll = PLL_28, - .no_msp34xx = 1, - .no_tda7432 = 1, - .no_tda9875 = 1, - .muxsel_hook = kodicom4400r_muxsel, -}, -{ - /* Bill Brack <wbrack@mmm.com.hk> */ - /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the - * one which controls the analog switch, and must use the card type) - * is the 2nd one detected. The other 3 chips should use this card - * type + + }, + [BTTV_BOARD_PXC200] = { + /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */ + .name = "Imagenation PXC200", + .video_inputs = 5, + .audio_inputs = 1, + .tuner = -1, + .svhs = 1, /* was: 4 */ + .gpiomask = 0, + .muxsel = { 2, 3, 1, 0, 0}, + .audiomux = { 0 }, + .needs_tvaudio = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .muxsel_hook = PXC200_muxsel, + + }, + [BTTV_BOARD_FLYVIDEO_98] = { + .name = "Lifeview FlyVideo 98 LR50", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x1800, /* 0x8dfe00 */ + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 }, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_IPROTV] = { + .name = "Formac iProTV, Formac ProTV I (bt848)", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 3, + .gpiomask = 1, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 1, 0, 0, 0, 0 }, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x20 ---------------------------------- */ + [BTTV_BOARD_INTEL_C_S_PCI] = { + .name = "Intel Create and Share PCI/ Smart Video Recorder III", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = -1, + .svhs = 2, + .gpiomask = 0, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0 }, + .needs_tvaudio = 0, + .tuner_type = 4, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TERRATVALUE] = { + .name = "Terratec TerraTValue Version Bt878", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0xffff00, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0x500, 0, 0x300, 0x900, 0x900}, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_WINFAST2000] = { + .name = "Leadtek WinFast 2000/ WinFast 2000 XP", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .muxsel = { 2, 3, 1, 1, 0}, /* TV, CVid, SVid, CVid over SVid connector */ + #if 0 + .gpiomask = 0xc33000, + .audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000 }, + #else + /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */ + .gpiomask = 0xb33000, + .audiomux = { 0x122000,0x1000,0x0000,0x620000,0x800000 }, + #endif + /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) + gpio23 -- hef4052:nEnable (0x800000) + gpio12 -- hef4052:A1 + gpio13 -- hef4052:A0 + 0x0000: external audio + 0x1000: FM + 0x2000: TV + 0x3000: n.c. + Note: There exists another variant "Winfast 2000" with tv stereo !? + Note: eeprom only contains FF and pci subsystem id 107d:6606 + */ + .needs_tvaudio = 0, + .pll = PLL_28, + .has_radio = 1, + .tuner_type = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */ + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .audio_hook = winfast2000_audio, + .has_remote = 1, + }, + [BTTV_BOARD_CHRONOS_VS2] = { + .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II", + .video_inputs = 4, + .audio_inputs = 3, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x1800, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800}, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x24 ---------------------------------- */ + [BTTV_BOARD_TYPHOON_TVIEW] = { + .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner", + .video_inputs = 4, + .audio_inputs = 3, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x1800, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 }, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_radio = 1, + }, + [BTTV_BOARD_PXELVWPLTVPRO] = { + .name = "Prolink PixelView PlayTV pro", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0xff, + .muxsel = { 2, 3, 1, 1 }, + .audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MAGICTVIEW063] = { + .name = "Askey CPH06X TView99", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x551e00, + .muxsel = { 2, 3, 1, 0}, + .audiomux = { 0x551400, 0x551200, 0, 0, 0x551c00, 0x551200 }, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = 1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_remote = 1, + }, + [BTTV_BOARD_PINNACLE] = { + .name = "Pinnacle PCTV Studio/Rave", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x03000F, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 2, 0xd0001, 0, 0, 1}, + .needs_tvaudio = 0, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x28 ---------------------------------- */ + [BTTV_BOARD_STB2] = { + .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 7, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 4, 0, 2, 3, 1}, + .no_msp34xx = 1, + .needs_tvaudio = 1, + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + }, + [BTTV_BOARD_AVPHONE98] = { + .name = "AVerMedia TVPhone 98", + .video_inputs = 3, + .audio_inputs = 4, + .tuner = 0, + .svhs = 2, + .gpiomask = 15, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 13, 4, 11, 7, 0, 0}, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_radio = 1, + .audio_hook = avermedia_tvphone_audio, + }, + [BTTV_BOARD_PV951] = { + .name = "ProVideo PV951", /* pic16c54 */ + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0, 0, 0, 0, 0}, + .needs_tvaudio = 1, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = 1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ONAIR_TV] = { + .name = "Little OnAir TV", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0xe00b, + .muxsel = {2, 3, 1, 1}, + .audiomux = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc}, + .no_msp34xx = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x2c ---------------------------------- */ + [BTTV_BOARD_SIGMA_TVII_FM] = { + .name = "Sigma TVII-FM", + .video_inputs = 2, + .audio_inputs = 1, + .tuner = 0, + .svhs = -1, + .gpiomask = 3, + .muxsel = {2, 3, 1, 1}, + .audiomux = {1, 1, 0, 2, 3}, + .no_msp34xx = 1, + .pll = PLL_NONE, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MATRIX_VISION2] = { + .name = "MATRIX-Vision MV-Delta 2", + .video_inputs = 5, + .audio_inputs = 1, + .tuner = -1, + .svhs = 3, + .gpiomask = 0, + .muxsel = { 2, 3, 1, 0, 0}, + .audiomux = {0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ZOLTRIX_GENIE] = { + .name = "Zoltrix Genie TV/FM", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0xbcf03f, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0, 0xbcb03f}, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = 21, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TERRATVRADIO] = { + .name = "Terratec TV/Radio+", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x70000, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000, 0x20000 }, + .needs_tvaudio = 1, + .no_msp34xx = 1, + .pll = PLL_35, + .tuner_type = 1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_radio = 1, + }, + + /* ---- card 0x30 ---------------------------------- */ + [BTTV_BOARD_DYNALINK] = { + .name = "Askey CPH03x/ Dynalink Magic TView", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 15, + .muxsel = { 2, 3, 1, 1}, + .audiomux = {2,0,0,0,1}, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_GVBCTV3PCI] = { + .name = "IODATA GV-BCTV3/PCI", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x010f00, + .muxsel = {2, 3, 0, 0}, + .audiomux = {0x10000, 0, 0x10000, 0, 0, 0}, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_ALPS_TSHC6_NTSC, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .audio_hook = gvbctv3pci_audio, + }, + [BTTV_BOARD_PXELVWPLTVPAK] = { + .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP", + .video_inputs = 5, + .audio_inputs = 1, + .tuner = 0, + .svhs = 3, + .gpiomask = 0xAA0000, + .muxsel = { 2,3,1,1,-1 }, + .digital_mode = DIGITAL_MODE_CAMERA, + .audiomux = { 0x20000, 0, 0x80000, 0x80000, 0xa8000, 0x46000 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL_I, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_remote = 1, + /* GPIO wiring: (different from Rev.4C !) + GPIO17: U4.A0 (first hef4052bt) + GPIO19: U4.A1 + GPIO20: U5.A1 (second hef4052bt) + GPIO21: U4.nEN + GPIO22: BT832 Reset Line + GPIO23: A5,A0, U5,nEN + Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22 + */ + }, + [BTTV_BOARD_EAGLE] = { + .name = "Eagle Wireless Capricorn2 (bt878A)", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 7, + .muxsel = { 2, 0, 1, 1}, + .audiomux = { 0, 1, 2, 3, 4}, + .pll = PLL_28, + .tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x34 ---------------------------------- */ + [BTTV_BOARD_PINNACLEPRO] = { + /* David Härdeman <david@2gen.com> */ + .name = "Pinnacle PCTV Studio Pro", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 3, + .gpiomask = 0x03000F, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 1, 0xd0001, 0, 0, 10}, + /* sound path (5 sources): + MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) + 0= ext. Audio IN + 1= from MUX2 + 2= Mono TV sound from Tuner + 3= not connected + MUX2 (mask 0x30000): + 0,2,3= from MSP34xx + 1= FM stereo Radio from Tuner */ + .needs_tvaudio = 0, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TVIEW_RDS_FM] = { + /* Claas Langbehn <claas@bigfoot.com>, + Sven Grothklags <sven@upb.de> */ + .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS", + .video_inputs = 4, + .audio_inputs = 3, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x1c, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0, 0, 0x10, 8, 4 }, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_radio = 1, + }, + [BTTV_BOARD_LIFETEC_9415] = { + /* Tim Röstermundt <rosterm@uni-muenster.de> + in de.comp.os.unix.linux.hardware: + options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 + audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff + options tuner type=5 */ + .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x18e0, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 }, + /* For cards with tda9820/tda9821: + 0x0000: Tuner normal stereo + 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) + 0x0880: Tuner A2 stereo */ + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_BESTBUY_EASYTV] = { + /* Miguel Angel Alvarez <maacruz@navegalia.com> + old Easy TV BT848 version (model CPH031) */ + .name = "Askey CPH031/ BESTBUY Easy TV", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0xF, + .muxsel = { 2, 3, 1, 0}, + .audiomux = { 2, 0, 0, 0, 10}, + .needs_tvaudio = 0, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x38 ---------------------------------- */ + [BTTV_BOARD_FLYVIDEO_98FM] = { + /* Gordon Heydon <gjheydon@bigfoot.com ('98) */ + .name = "Lifeview FlyVideo 98FM LR50", + .video_inputs = 4, + .audio_inputs = 3, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x1800, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 }, + .pll = PLL_28, + .tuner_type = 5, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + /* This is the ultimate cheapo capture card + * just a BT848A on a small PCB! + * Steve Hosgood <steve@equiinet.com> */ + [BTTV_BOARD_GRANDTEC] = { + .name = "GrandTec 'Grand Video Capture' (Bt848)", + .video_inputs = 2, + .audio_inputs = 0, + .tuner = -1, + .svhs = 1, + .gpiomask = 0, + .muxsel = { 3, 1 }, + .audiomux = { 0 }, + .needs_tvaudio = 0, + .no_msp34xx = 1, + .pll = PLL_35, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ASKEY_CPH060] = { + /* Daniel Herrington <daniel.herrington@home.com> */ + .name = "Askey CPH060/ Phoebe TV Master Only (No FM)", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0xe00, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 }, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_4036FY5_NTSC, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ASKEY_CPH03X] = { + /* Matti Mottus <mottus@physic.ut.ee> */ + .name = "Askey CPH03x TV Capturer", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x03000F, + .muxsel = { 2, 3, 1, 0}, + .audiomux = { 2,0,0,0,1 }, + .pll = PLL_28, + .tuner_type = 0, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x3c ---------------------------------- */ + [BTTV_BOARD_MM100PCTV] = { + /* Philip Blundell <philb@gnu.org> */ + .name = "Modular Technology MM100PCTV", + .video_inputs = 2, + .audio_inputs = 2, + .tuner = 0, + .svhs = -1, + .gpiomask = 11, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 2, 0, 0, 1, 8}, + .pll = PLL_35, + .tuner_type = TUNER_TEMIC_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_GMV1] = { + /* Adrian Cox <adrian@humboldt.co.uk */ + .name = "AG Electronics GMV1", + .video_inputs = 2, + .audio_inputs = 0, + .tuner = -1, + .svhs = 1, + .gpiomask = 0xF, + .muxsel = { 2, 2}, + .audiomux = { }, + .no_msp34xx = 1, + .needs_tvaudio = 0, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_BESTBUY_EASYTV2] = { + /* Miguel Angel Alvarez <maacruz@navegalia.com> + new Easy TV BT878 version (model CPH061) + special thanks to Informatica Mieres for providing the card */ + .name = "Askey CPH061/ BESTBUY Easy TV (bt878)", + .video_inputs = 3, + .audio_inputs = 2, + .tuner = 0, + .svhs = 2, + .gpiomask = 0xFF, + .muxsel = { 2, 3, 1, 0}, + .audiomux = { 1, 0, 4, 4, 9}, + .needs_tvaudio = 0, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_ATI_TVWONDER] = { + /* Lukas Gebauer <geby@volny.cz> */ + .name = "ATI TV-Wonder", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0xf03f, + .muxsel = { 2, 3, 1, 0 }, + .audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe}, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x40 ---------------------------------- */ + [BTTV_BOARD_ATI_TVWONDERVE] = { + /* Lukas Gebauer <geby@volny.cz> */ + .name = "ATI TV-Wonder VE", + .video_inputs = 2, + .audio_inputs = 1, + .tuner = 0, + .svhs = -1, + .gpiomask = 1, + .muxsel = { 2, 3, 0, 1}, + .audiomux = { 0, 0, 1, 0, 0}, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_FLYVIDEO2000] = { + /* DeeJay <deejay@westel900.net (2000S) */ + .name = "Lifeview FlyVideo 2000S LR90", + .video_inputs = 3, + .audio_inputs = 3, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x18e0, + .muxsel = { 2, 3, 0, 1}, + /* Radio changed from 1e80 to 0x800 to make + FlyVideo2000S in .hu happy (gm)*/ + /* -dk-???: set mute=0x1800 for tda9874h daughterboard */ + .audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 }, + .audio_hook = fv2000s_audio, + .no_msp34xx = 1, + .no_tda9875 = 1, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = 5, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TERRATVALUER] = { + .name = "Terratec TValueRadio", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0xffff00, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0x500, 0x500, 0x300, 0x900, 0x900}, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_radio = 1, + }, + [BTTV_BOARD_GVBCTV4PCI] = { + /* TANAKA Kei <peg00625@nifty.com> */ + .name = "IODATA GV-BCTV4/PCI", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x010f00, + .muxsel = {2, 3, 0, 0}, + .audiomux = {0x10000, 0, 0x10000, 0, 0, 0}, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .audio_hook = gvbctv3pci_audio, + }, + + /* ---- card 0x44 ---------------------------------- */ + [BTTV_BOARD_VOODOOTV_FM] = { + .name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)", + /* try "insmod msp3400 simple=0" if you have + * sound problems with this card. */ + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = -1, + .gpiomask = 0x4f8a00, + /* 0x100000: 1=MSP enabled (0=disable again) + * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ + .audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff}, + /* tvtuner, radio, external,internal, mute, stereo + * tuner, Composit, SVid, Composit-on-Svid-adapter */ + .muxsel = { 2, 3 ,0 ,1}, + .tuner_type = TUNER_MT2032, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + }, + [BTTV_BOARD_AIMMS] = { + /* Philip Blundell <pb@nexus.co.uk> */ + .name = "Active Imaging AIMMS", + .video_inputs = 1, + .audio_inputs = 0, + .tuner = -1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .pll = PLL_28, + .muxsel = { 2 }, + .gpiomask = 0 + }, + [BTTV_BOARD_PV_BT878P_PLUS] = { + /* Tomasz Pyra <hellfire@sedez.iq.pl> */ + .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)", + .video_inputs = 3, + .audio_inputs = 4, + .tuner = 0, + .svhs = 2, + .gpiomask = 15, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0, 0, 11, 7, 13, 0}, /* TV and Radio with same GPIO ! */ + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = 25, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_remote = 1, + /* GPIO wiring: + GPIO0: U4.A0 (hef4052bt) + GPIO1: U4.A1 + GPIO2: U4.A1 (second hef4052bt) + GPIO3: U4.nEN, U5.A0, A5.nEN + GPIO8-15: vrd866b ? + */ + }, + [BTTV_BOARD_FLYVIDEO98EZ] = { + .name = "Lifeview FlyVideo 98EZ (capture only) LR51", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = -1, + .svhs = 2, + .muxsel = { 2, 3, 1, 1}, /* AV1, AV2, SVHS, CVid adapter on SVHS */ + .pll = PLL_28, + .no_msp34xx = 1, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x48 ---------------------------------- */ + [BTTV_BOARD_PV_BT878P_9B] = { + /* Dariusz Kowalewski <darekk@automex.pl> */ + .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x3f, + .muxsel = { 2, 3, 1, 1 }, + .audiomux = { 0x01, 0x00, 0x03, 0x03, 0x09, 0x02 }, + .needs_tvaudio = 1, + .no_msp34xx = 1, + .no_tda9875 = 1, + .pll = PLL_28, + .tuner_type = 5, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .audio_hook = pvbt878p9b_audio, /* Note: not all cards have stereo */ + .has_radio = 1, /* Note: not all cards have radio */ + .has_remote = 1, + /* GPIO wiring: + GPIO0: A0 hef4052 + GPIO1: A1 hef4052 + GPIO3: nEN hef4052 + GPIO8-15: vrd866b + GPIO20,22,23: R30,R29,R28 + */ + }, + [BTTV_BOARD_SENSORAY311] = { + /* Clay Kunz <ckunz@mail.arc.nasa.gov> */ + /* you must jumper JP5 for the card to work */ + .name = "Sensoray 311", + .video_inputs = 5, + .audio_inputs = 0, + .tuner = -1, + .svhs = 4, + .gpiomask = 0, + .muxsel = { 2, 3, 1, 0, 0}, + .audiomux = { 0 }, + .needs_tvaudio = 0, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_RV605] = { + /* Miguel Freitas <miguel@cetuc.puc-rio.br> */ + .name = "RemoteVision MX (RV605)", + .video_inputs = 16, + .audio_inputs = 0, + .tuner = -1, + .svhs = -1, + .gpiomask = 0x00, + .gpiomask2 = 0x07ff, + .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03, + 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 }, + .no_msp34xx = 1, + .no_tda9875 = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .muxsel_hook = rv605_muxsel, + }, + [BTTV_BOARD_POWERCLR_MTV878] = { + .name = "Powercolor MTV878/ MTV878R/ MTV878F", + .video_inputs = 3, + .audio_inputs = 2, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ + .muxsel = { 2, 1, 1, }, + .audiomux = { 0, 1, 2, 2, 4 }, + .needs_tvaudio = 0, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .pll = PLL_28, + .has_radio = 1, + }, + + /* ---- card 0x4c ---------------------------------- */ + [BTTV_BOARD_WINDVR] = { + /* Masaki Suzuki <masaki@btree.org> */ + .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x140007, + .muxsel = { 2, 3, 1, 1 }, + .audiomux = { 0, 1, 2, 3, 4, 0 }, + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .audio_hook = windvr_audio, + }, + [BTTV_BOARD_GRANDTEC_MULTI] = { + .name = "GrandTec Multi Capture Card (Bt878)", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = -1, + .svhs = -1, + .gpiomask = 0, + .muxsel = { 2, 3, 1, 0 }, + .audiomux = { 0 }, + .needs_tvaudio = 0, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_KWORLD] = { + .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF", + .video_inputs = 4, + .audio_inputs = 3, + .tuner = 0, + .svhs = 2, + .gpiomask = 7, + .muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */ + .audiomux = { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio! + * This card lacks external Audio In, so we mute it on Ext. & Int. + * The PCB can take a sbx1637/sbx1673, wiring unknown. + * This card lacks PCI subsystem ID, sigh. + * audiomux=1: lower volume, 2+3: mute + * btwincap uses 0x80000/0x80003 + */ + .needs_tvaudio = 0, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = 5, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and + radio signal strength indicators work fine. */ + .has_radio = 1, + /* GPIO Info: + GPIO0,1: HEF4052 A0,A1 + GPIO2: HEF4052 nENABLE + GPIO3-7: n.c. + GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card] + GPIO14,15: ?? + GPIO16-21: n.c. + GPIO22,23: ?? + ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/ + }, + [BTTV_BOARD_DSP_TCVIDEO] = { + /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */ + .name = "DSP Design TCVIDEO", + .video_inputs = 4, + .svhs = -1, + .muxsel = { 2, 3, 1, 0}, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x50 ---------------------------------- */ + [BTTV_BOARD_HAUPPAUGEPVR] = { + .name = "Hauppauge WinTV PVR", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .muxsel = { 2, 0, 1, 1}, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + + .gpiomask = 7, + .audiomux = {7}, + }, + [BTTV_BOARD_GVBCTV5PCI] = { + .name = "IODATA GV-BCTV5/PCI", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x0f0f80, + .muxsel = {2, 3, 1, 0}, + .audiomux = {0x030000, 0x010000, 0, 0, 0x020000, 0}, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .audio_hook = gvbctv5pci_audio, + .has_radio = 1, + }, + [BTTV_BOARD_OSPREY1x0] = { + .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */ + .video_inputs = 4, /* id-inputs-clock */ + .audio_inputs = 0, + .tuner = -1, + .svhs = 3, + .muxsel = { 3, 2, 0, 1 }, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY1x0_848] = { + .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */ + .video_inputs = 3, + .audio_inputs = 0, + .tuner = -1, + .svhs = 2, + .muxsel = { 2, 3, 1 }, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + }, + + /* ---- card 0x54 ---------------------------------- */ + [BTTV_BOARD_OSPREY101_848] = { + .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */ + .video_inputs = 2, + .audio_inputs = 0, + .tuner = -1, + .svhs = 1, + .muxsel = { 3, 1 }, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY1x1] = { + .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */ + .video_inputs = 1, + .audio_inputs = 0, + .tuner = -1, + .svhs = -1, + .muxsel = { 0 }, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY1x1_SVID] = { + .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */ + .video_inputs = 2, + .audio_inputs = 0, + .tuner = -1, + .svhs = 1, + .muxsel = { 0, 1 }, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY2xx] = { + .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */ + .video_inputs = 1, + .audio_inputs = 1, + .tuner = -1, + .svhs = -1, + .muxsel = { 0 }, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + }, + + /* ---- card 0x58 ---------------------------------- */ + [BTTV_BOARD_OSPREY2x0_SVID] = { + .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */ + .video_inputs = 2, + .audio_inputs = 1, + .tuner = -1, + .svhs = 1, + .muxsel = { 0, 1 }, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY2x0] = { + .name = "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */ + .video_inputs = 2, + .audio_inputs = 1, + .tuner = -1, + .svhs = 1, + .muxsel = { 2, 3 }, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY500] = { + .name = "Osprey 500", /* 500 */ + .video_inputs = 2, + .audio_inputs = 1, + .tuner = -1, + .svhs = 1, + .muxsel = { 2, 3 }, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + }, + [BTTV_BOARD_OSPREY540] = { + .name = "Osprey 540", /* 540 */ + .video_inputs = 4, + .audio_inputs = 1, + .tuner = -1, + #if 0 /* TODO ... */ + .svhs = OSPREY540_SVID_ANALOG, + .muxsel = { [OSPREY540_COMP_ANALOG] = 2, + [OSPREY540_SVID_ANALOG] = 3, }, + #endif + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + #if 0 /* TODO ... */ + .muxsel_hook = osprey_540_muxsel, + .picture_hook = osprey_540_set_picture, + #endif + }, + + /* ---- card 0x5C ---------------------------------- */ + [BTTV_BOARD_OSPREY2000] = { + .name = "Osprey 2000", /* 2000 */ + .video_inputs = 2, + .audio_inputs = 1, + .tuner = -1, + .svhs = 1, + .muxsel = { 2, 3 }, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ + }, + [BTTV_BOARD_IDS_EAGLE] = { + /* M G Berberich <berberic@forwiss.uni-passau.de> */ + .name = "IDS Eagle", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = -1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .svhs = -1, + .gpiomask = 0, + .muxsel = { 0, 1, 2, 3 }, + .muxsel_hook = eagle_muxsel, + .no_msp34xx = 1, + .no_tda9875 = 1, + .pll = PLL_28, + }, + [BTTV_BOARD_PINNACLESAT] = { + .name = "Pinnacle PCTV Sat", + .video_inputs = 2, + .audio_inputs = 0, + .svhs = 1, + .tuner = -1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .muxsel = { 3, 0, 1, 2}, + .pll = PLL_28, + .no_gpioirq = 1, + .has_dvb = 1, + }, + [BTTV_BOARD_FORMAC_PROTV] = { + .name = "Formac ProTV II (bt878)", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 3, + .gpiomask = 2, + /* TV, Comp1, Composite over SVID con, SVID */ + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 2, 2, 0, 0, 0 }, + .pll = PLL_28, + .has_radio = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + /* sound routing: + GPIO=0x00,0x01,0x03: mute (?) + 0x02: both TV and radio (tuner: FM1216/I) + The card has onboard audio connectors labeled "cdrom" and "board", + not soldered here, though unknown wiring. + Card lacks: external audio in, pci subsystem id. */ - .name = "Kodicom 4400R (slave)", - .video_inputs = 16, - .audio_inputs = 0, - .tuner = -1, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .svhs = -1, - .gpiomask = 0x010000, - .no_gpioirq = 1, - .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 }, - .pll = PLL_28, - .no_msp34xx = 1, - .no_tda7432 = 1, - .no_tda9875 = 1, - .muxsel_hook = kodicom4400r_muxsel, -}, -{ - /* ---- card 0x86---------------------------------- */ - /* Michael Henson <mhenson@clarityvi.com> */ - /* Adlink RTV24 with special unlock codes */ - .name = "Adlink RTV24", - .video_inputs = 4, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .muxsel = { 2, 3, 1, 0}, - .tuner_type = -1, - .tuner_addr = ADDR_UNSET, - .pll = PLL_28, -}, -{ - /* ---- card 0x87---------------------------------- */ - /* Michael Krufky <mkrufky@m1k.net> */ - .name = "DViCO FusionHDTV 5 Lite", - .tuner = 0, - .tuner_type = TUNER_LG_TDVS_H062F, - .tuner_addr = ADDR_UNSET, - .video_inputs = 3, - .audio_inputs = 1, - .svhs = 2, - .muxsel = { 2, 3, 1 }, - .gpiomask = 0x00e00007, - .audiomux = { 0x00400005, 0, 0x00000001, 0, 0x00c00007, 0 }, - .no_msp34xx = 1, - .no_tda9875 = 1, - .no_tda7432 = 1, -},{ - /* ---- card 0x88---------------------------------- */ - /* Mauro Carvalho Chehab <mchehab@brturbo.com.br> */ - .name = "Acorp Y878F", - .video_inputs = 3, - .audio_inputs = 1, - .tuner = 0, - .svhs = 2, - .gpiomask = 0x01fe00, - .muxsel = { 2, 3, 1, 1}, - .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 }, - .needs_tvaudio = 1, - .pll = PLL_28, - .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, - .tuner_addr = 0xc1 >>1, - .has_radio = 1, -}}; + }, + + /* ---- card 0x60 ---------------------------------- */ + [BTTV_BOARD_MACHTV] = { + .name = "MachTV", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = -1, + .gpiomask = 7, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0, 1, 2, 3, 4}, + .needs_tvaudio = 1, + .tuner_type = 5, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .pll = PLL_28, + }, + [BTTV_BOARD_EURESYS_PICOLO] = { + .name = "Euresys Picolo", + .video_inputs = 3, + .audio_inputs = 0, + .tuner = -1, + .svhs = 2, + .gpiomask = 0, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .muxsel = { 2, 0, 1}, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_PV150] = { + /* Luc Van Hoeylandt <luc@e-magic.be> */ + .name = "ProVideo PV150", /* 0x4f */ + .video_inputs = 2, + .audio_inputs = 0, + .tuner = -1, + .svhs = -1, + .gpiomask = 0, + .muxsel = { 2, 3 }, + .audiomux = { 0 }, + .needs_tvaudio = 0, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_AD_TVK503] = { + /* Hiroshi Takekawa <sian@big.or.jp> */ + /* This card lacks subsystem ID */ + .name = "AD-TVK503", /* 0x63 */ + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x001e8007, + .muxsel = { 2, 3, 1, 0 }, + /* Tuner, Radio, external, internal, off, on */ + .audiomux = { 0x08, 0x0f, 0x0a, 0x08, 0x0f, 0x08 }, + .needs_tvaudio = 0, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = 2, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .audio_hook = adtvk503_audio, + }, + + /* ---- card 0x64 ---------------------------------- */ + [BTTV_BOARD_HERCULES_SM_TV] = { + .name = "Hercules Smart TV Stereo", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x00, + .muxsel = { 2, 3, 1, 1 }, + .needs_tvaudio = 1, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = 5, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + /* Notes: + - card lacks subsystem ID + - stereo variant w/ daughter board with tda9874a @0xb0 + - Audio Routing: + always from tda9874 independent of GPIO (?) + external line in: unknown + - Other chips: em78p156elp @ 0x96 (probably IR remote control) + hef4053 (instead 4052) for unknown function + */ + }, + [BTTV_BOARD_PACETV] = { + .name = "Pace TV & Radio Card", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .muxsel = { 2, 3, 1, 1}, /* Tuner, CVid, SVid, CVid over SVid connector */ + .gpiomask = 0, + .no_tda9875 = 1, + .no_tda7432 = 1, + .tuner_type = 1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_radio = 1, + .pll = PLL_28, + /* Bt878, Bt832, FI1246 tuner; no pci subsystem id + only internal line out: (4pin header) RGGL + Radio must be decoded by msp3410d (not routed through)*/ + /* + .digital_mode = DIGITAL_MODE_CAMERA, todo! + */ + }, + [BTTV_BOARD_IVC200] = { + /* Chris Willing <chris@vislab.usyd.edu.au> */ + .name = "IVC-200", + .video_inputs = 1, + .audio_inputs = 0, + .tuner = -1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .svhs = -1, + .gpiomask = 0xdf, + .muxsel = { 2 }, + .pll = PLL_28, + }, + [BTTV_BOARD_XGUARD] = { + .name = "Grand X-Guard / Trust 814PCI", + .video_inputs = 16, + .audio_inputs = 0, + .tuner = -1, + .svhs = -1, + .tuner_type = 4, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask2 = 0xff, + .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 }, + .muxsel_hook = xguard_muxsel, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .pll = PLL_28, + }, + + /* ---- card 0x68 ---------------------------------- */ + [BTTV_BOARD_NEBULA_DIGITV] = { + .name = "Nebula Electronics DigiTV", + .video_inputs = 1, + .tuner = -1, + .svhs = -1, + .muxsel = { 2, 3, 1, 0}, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_dvb = 1, + .no_gpioirq = 1, + }, + [BTTV_BOARD_PV143] = { + /* Jorge Boncompte - DTI2 <jorge@dti2.net> */ + .name = "ProVideo PV143", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = -1, + .svhs = -1, + .gpiomask = 0, + .muxsel = { 2, 3, 1, 0 }, + .audiomux = { 0 }, + .needs_tvaudio = 0, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD009X1_MINIDIN] = { + /* M.Klahr@phytec.de */ + .name = "PHYTEC VD-009-X1 MiniDIN (bt878)", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = -1, /* card has no tuner */ + .svhs = 3, + .gpiomask = 0x00, + .muxsel = { 2, 3, 1, 0}, + .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD009X1_COMBI] = { + .name = "PHYTEC VD-009-X1 Combi (bt878)", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = -1, /* card has no tuner */ + .svhs = 3, + .gpiomask = 0x00, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + + /* ---- card 0x6c ---------------------------------- */ + [BTTV_BOARD_VD009_MINIDIN] = { + .name = "PHYTEC VD-009 MiniDIN (bt878)", + .video_inputs = 10, + .audio_inputs = 0, + .tuner = -1, /* card has no tuner */ + .svhs = 9, + .gpiomask = 0x00, + .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio + via the upper nibble of muxsel. here: used for + xternal video-mux */ + .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 }, + .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VD009_COMBI] = { + .name = "PHYTEC VD-009 Combi (bt878)", + .video_inputs = 10, + .audio_inputs = 0, + .tuner = -1, /* card has no tuner */ + .svhs = 9, + .gpiomask = 0x00, + .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio + via the upper nibble of muxsel. here: used for + xternal video-mux */ + .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 }, + .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_IVC100] = { + .name = "IVC-100", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = -1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .svhs = -1, + .gpiomask = 0xdf, + .muxsel = { 2, 3, 1, 0 }, + .pll = PLL_28, + }, + [BTTV_BOARD_IVC120] = { + /* IVC-120G - Alan Garfield <alan@fromorbit.com> */ + .name = "IVC-120G", + .video_inputs = 16, + .audio_inputs = 0, /* card has no audio */ + .tuner = -1, /* card has no tuner */ + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .svhs = -1, /* card has no svhs */ + .needs_tvaudio = 0, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .gpiomask = 0x00, + .muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, + 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 }, + .muxsel_hook = ivc120_muxsel, + .pll = PLL_28, + }, + + /* ---- card 0x70 ---------------------------------- */ + [BTTV_BOARD_PC_HDTV] = { + .name = "pcHDTV HD-2000 TV", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .muxsel = { 2, 3, 1, 0}, + .tuner_type = TUNER_PHILIPS_ATSC, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_dvb = 1, + }, + [BTTV_BOARD_TWINHAN_DST] = { + .name = "Twinhan DST + clones", + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_video = 1, + .has_dvb = 1, + }, + [BTTV_BOARD_WINFASTVC100] = { + .name = "Winfast VC100", + .video_inputs = 3, + .audio_inputs = 0, + .svhs = 1, + .tuner = -1, + .muxsel = { 3, 1, 1, 3}, /* Vid In, SVid In, Vid over SVid in connector */ + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .pll = PLL_28, + }, + [BTTV_BOARD_TEV560] = { + .name = "Teppro TEV-560/InterVision IV-560", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 3, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 1, 1, 1, 1, 0}, + .needs_tvaudio = 1, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .pll = PLL_35, + }, + + /* ---- card 0x74 ---------------------------------- */ + [BTTV_BOARD_SIMUS_GVC1100] = { + .name = "SIMUS GVC1100", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = -1, + .svhs = -1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .pll = PLL_28, + .muxsel = { 2, 2, 2, 2}, + .gpiomask = 0x3F, + .muxsel_hook = gvc1100_muxsel, + }, + [BTTV_BOARD_NGSTV_PLUS] = { + /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */ + .name = "NGS NGSTV+", + .video_inputs = 3, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x008007, + .muxsel = {2, 3, 0, 0}, + .audiomux = {0, 0, 0, 0, 0x000003, 0}, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_remote = 1, + }, + [BTTV_BOARD_LMLBT4] = { + /* http://linuxmedialabs.com */ + .name = "LMLBT4", + .video_inputs = 4, /* IN1,IN2,IN3,IN4 */ + .audio_inputs = 0, + .tuner = -1, + .svhs = -1, + .muxsel = { 2, 3, 1, 0 }, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .needs_tvaudio = 0, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_TEKRAM_M205] = { + /* Helmroos Harri <harri.helmroos@pp.inet.fi> */ + .name = "Tekram M205 PRO", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .svhs = 2, + .needs_tvaudio = 0, + .gpiomask = 0x68, + .muxsel = { 2, 3, 1}, + .audiomux = { 0x68, 0x68, 0x61, 0x61, 0x00 }, + .pll = PLL_28, + }, + + /* ---- card 0x78 ---------------------------------- */ + [BTTV_BOARD_CONTVFMI] = { + /* Javier Cendan Ares <jcendan@lycos.es> */ + /* bt878 TV + FM without subsystem ID */ + .name = "Conceptronic CONTVFMi", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x008007, + .muxsel = { 2, 3, 1, 1 }, + .audiomux = { 0, 1, 2, 2, 3 }, + .needs_tvaudio = 0, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_remote = 1, + .has_radio = 1, + }, + [BTTV_BOARD_PICOLO_TETRA_CHIP] = { + /*Eric DEBIEF <debief@telemsa.com>*/ + /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/ + /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/ + /*0x79 in bttv.h*/ + .name = "Euresys Picolo Tetra", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = -1, + .svhs = -1, + .gpiomask = 0, + .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/ + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/ + .audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */ + .pll = PLL_28, + .needs_tvaudio = 0, + .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_SPIRIT_TV] = { + /* Spirit TV Tuner from http://spiritmodems.com.au */ + /* Stafford Goodsell <surge@goliath.homeunix.org> */ + .name = "Spirit TV Tuner", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x0000000f, + .muxsel = { 2, 1, 1 }, + .audiomux = { 0x02, 0x00, 0x00, 0x00, 0x00}, + .tuner_type = TUNER_TEMIC_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda9875 = 1, + }, + [BTTV_BOARD_AVDVBT_771] = { + /* Wolfram Joost <wojo@frokaschwei.de> */ + .name = "AVerMedia AVerTV DVB-T 771", + .video_inputs = 2, + .svhs = 1, + .tuner = -1, + .tuner_type = TUNER_ABSENT, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .muxsel = { 3 , 3 }, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .has_dvb = 1, + .no_gpioirq = 1, + .has_remote = 1, + }, + /* ---- card 0x7c ---------------------------------- */ + [BTTV_BOARD_AVDVBT_761] = { + /* Matt Jesson <dvb@jesson.eclipse.co.uk> */ + /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */ + .name = "AverMedia AverTV DVB-T 761", + .video_inputs = 2, + .tuner = -1, + .svhs = 1, + .muxsel = { 3, 1, 2, 0}, /* Comp0, S-Video, ?, ? */ + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_dvb = 1, + .no_gpioirq = 1, + .has_remote = 1, + }, + [BTTV_BOARD_MATRIX_VISIONSQ] = { + /* andre.schwarz@matrix-vision.de */ + .name = "MATRIX Vision Sigma-SQ", + .video_inputs = 16, + .audio_inputs = 0, + .tuner = -1, + .svhs = -1, + .gpiomask = 0x0, + .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, + 3, 3, 3, 3, 3, 3, 3, 3 }, + .muxsel_hook = sigmaSQ_muxsel, + .audiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_MATRIX_VISIONSLC] = { + /* andre.schwarz@matrix-vision.de */ + .name = "MATRIX Vision Sigma-SLC", + .video_inputs = 4, + .audio_inputs = 0, + .tuner = -1, + .svhs = -1, + .gpiomask = 0x0, + .muxsel = { 2, 2, 2, 2 }, + .muxsel_hook = sigmaSLC_muxsel, + .audiomux = { 0 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + /* BTTV_BOARD_APAC_VIEWCOMP */ + [BTTV_BOARD_APAC_VIEWCOMP] = { + /* Attila Kondoros <attila.kondoros@chello.hu> */ + /* bt878 TV + FM 0x00000000 subsystem ID */ + .name = "APAC Viewcomp 878(AMAX)", + .video_inputs = 2, + .audio_inputs = 1, + .tuner = 0, + .svhs = -1, + .gpiomask = 0xFF, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 2, 0, 0, 0, 10}, + .needs_tvaudio = 0, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_PAL, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */ + .has_radio = 1, /* not every card has radio */ + }, + + /* ---- card 0x80 ---------------------------------- */ + [BTTV_BOARD_DVICO_DVBT_LITE] = { + /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */ + .name = "DViCO FusionHDTV DVB-T Lite", + .tuner = -1, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .pll = PLL_28, + .no_video = 1, + .has_dvb = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + [BTTV_BOARD_VGEAR_MYVCD] = { + /* Steven <photon38@pchome.com.tw> */ + .name = "V-Gear MyVCD", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x3f, + .muxsel = {2, 3, 1, 0}, + .audiomux = {0x31, 0x31, 0x31, 0x31, 0x31, 0x31}, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_PHILIPS_NTSC_M, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_radio = 0, + #if 0 + .has_remote = 1, + #endif + }, + [BTTV_BOARD_SUPER_TV] = { + /* Rick C <cryptdragoon@gmail.com> */ + .name = "Super TV Tuner", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .muxsel = { 2, 3, 1, 0}, + .tuner_type = TUNER_PHILIPS_NTSC, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x008007, + .audiomux = { 0, 0x000001,0,0, 0}, + .needs_tvaudio = 1, + .has_radio = 1, + }, + [BTTV_BOARD_TIBET_CS16] = { + /* Chris Fanning <video4linux@haydon.net> */ + .name = "Tibet Systems 'Progress DVR' CS16", + .video_inputs = 16, + .audio_inputs = 0, + .tuner = -1, + .svhs = -1, + .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 }, + .pll = PLL_28, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .muxsel_hook = tibetCS16_muxsel, + }, + [BTTV_BOARD_KODICOM_4400R] = { + /* Bill Brack <wbrack@mmm.com.hk> */ + /* + * Note that, because of the card's wiring, the "master" + * BT878A chip (i.e. the one which controls the analog switch + * and must use this card type) is the 2nd one detected. The + * other 3 chips should use card type 0x85, whose description + * follows this one. There is a EEPROM on the card (which is + * connected to the I2C of one of those other chips), but is + * not currently handled. There is also a facility for a + * "monitor", which is also not currently implemented. + */ + .name = "Kodicom 4400R (master)", + .video_inputs = 16, + .audio_inputs = 0, + .tuner = -1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .svhs = -1, + /* GPIO bits 0-9 used for analog switch: + * 00 - 03: camera selector + * 04 - 06: channel (controller) selector + * 07: data (1->on, 0->off) + * 08: strobe + * 09: reset + * bit 16 is input from sync separator for the channel + */ + .gpiomask = 0x0003ff, + .no_gpioirq = 1, + .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 }, + .pll = PLL_28, + .no_msp34xx = 1, + .no_tda7432 = 1, + .no_tda9875 = 1, + .muxsel_hook = kodicom4400r_muxsel, + }, + [BTTV_BOARD_KODICOM_4400R_SL] = { + /* Bill Brack <wbrack@mmm.com.hk> */ + /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the + * one which controls the analog switch, and must use the card type) + * is the 2nd one detected. The other 3 chips should use this card + * type + */ + .name = "Kodicom 4400R (slave)", + .video_inputs = 16, + .audio_inputs = 0, + .tuner = -1, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .svhs = -1, + .gpiomask = 0x010000, + .no_gpioirq = 1, + .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 }, + .pll = PLL_28, + .no_msp34xx = 1, + .no_tda7432 = 1, + .no_tda9875 = 1, + .muxsel_hook = kodicom4400r_muxsel, + }, + /* ---- card 0x86---------------------------------- */ + [BTTV_BOARD_ADLINK_RTV24] = { + /* Michael Henson <mhenson@clarityvi.com> */ + /* Adlink RTV24 with special unlock codes */ + .name = "Adlink RTV24", + .video_inputs = 4, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .muxsel = { 2, 3, 1, 0}, + .tuner_type = -1, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .pll = PLL_28, + }, + /* ---- card 0x87---------------------------------- */ + [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = { + /* Michael Krufky <mkrufky@m1k.net> */ + .name = "DViCO FusionHDTV 5 Lite", + .tuner = 0, + .tuner_type = TUNER_LG_TDVS_H062F, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .video_inputs = 3, + .audio_inputs = 1, + .svhs = 2, + .muxsel = { 2, 3, 1 }, + .gpiomask = 0x00e00007, + .audiomux = { 0x00400005, 0, 0x00000001, 0, 0x00c00007, 0 }, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + .has_dvb = 1, + }, + /* ---- card 0x88---------------------------------- */ + [BTTV_BOARD_ACORP_Y878F] = { + /* Mauro Carvalho Chehab <mchehab@brturbo.com.br> */ + .name = "Acorp Y878F", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x01fe00, + .muxsel = { 2, 3, 1, 1}, + .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 }, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, + .tuner_addr = 0xc1 >>1, + .radio_addr = 0xc1 >>1, + .has_radio = 1, + }, + /* ---- card 0x89 ---------------------------------- */ + [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = { + .name = "Conceptronic CTVFMi v2", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x001c0007, + .muxsel = { 2, 3, 1, 1 }, + .audiomux = { 0, 1, 2, 2, 3 }, + .needs_tvaudio = 0, + .pll = PLL_28, + .tuner_type = TUNER_TENA_9533_DI, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_remote = 1, + .has_radio = 1, + }, + /* ---- card 0x8a ---------------------------------- */ + [BTTV_BOARD_PV_BT878P_2E] = { + .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)", + .video_inputs = 5, + .audio_inputs = 1, + .tuner = 0, + .svhs = 3, + .gpiomask = 0x01fe00, + .muxsel = { 2,3,1,1,-1 }, + .digital_mode = DIGITAL_MODE_CAMERA, + .audiomux = { 0x00400, 0x10400, 0x04400, 0x80000, 0x12400, 0x46000 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_LG_PAL_FM, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_remote = 1, + }, + /* ---- card 0x8b ---------------------------------- */ + [BTTV_BOARD_PV_M4900] = { + /* Sérgio Fortier <sergiofortier@yahoo.com.br> */ + .name = "Prolink PixelView PlayTV MPEG2 PV-M4900", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 0x3f, + .muxsel = { 2, 3, 1, 1 }, + .audiomux = { 0x21, 0x20, 0x24, 0x2c, 0x29, 0x29 }, + .no_msp34xx = 1, + .pll = PLL_28, + .tuner_type = TUNER_YMEC_TVF_5533MF, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .has_radio = 1, + .has_remote = 1, + }, + /* ---- card 0x8c ---------------------------------- */ + [BTTV_BOARD_OSPREY440] = { + .name = "Osprey 440", + .video_inputs = 1, + .audio_inputs = 1, + .tuner = -1, + .svhs = 1, + .muxsel = { 2 }, + .pll = PLL_28, + .tuner_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .no_msp34xx = 1, + .no_tda9875 = 1, + .no_tda7432 = 1, + }, + /* ---- card 0x8d ---------------------------------- */ + [BTTV_BOARD_ASOUND_SKYEYE] = { + .name = "Asound Skyeye PCTV", + .video_inputs = 3, + .audio_inputs = 1, + .tuner = 0, + .svhs = 2, + .gpiomask = 15, + .muxsel = { 2, 3, 1, 1}, + .audiomux = {2,0,0,0,1}, + .needs_tvaudio = 1, + .pll = PLL_28, + .tuner_type = 2, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + }, + +}; static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); @@ -2461,7 +2840,7 @@ void __devinit bttv_idcard(struct bttv *btv) btv->c.nr, btv->cardid & 0xffff, (btv->cardid >> 16) & 0xffff); printk(KERN_DEBUG "please mail id, board name and " - "the correct card= insmod option to kraxel@bytesex.org\n"); + "the correct card= insmod option to video4linux-list@redhat.com\n"); } } @@ -2510,11 +2889,11 @@ void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]) int type = -1; if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13)) - type = BTTV_MODTEC_205; + type = BTTV_BOARD_MODTEC_205; else if (0 == strncmp(eeprom_data+20,"Picolo",7)) - type = BTTV_EURESYS_PICOLO; + type = BTTV_BOARD_EURESYS_PICOLO; else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0) - type = BTTV_HAUPPAUGE; /* old bt848 */ + type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */ if (-1 != type) { btv->c.type = type; @@ -2548,7 +2927,7 @@ static void flyvideo_gpio(struct bttv *btv) switch(ttype) { case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */ break; - case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */ + case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */ break; case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */ break; @@ -2564,7 +2943,7 @@ static void flyvideo_gpio(struct bttv *btv) has_radio = gpio & 0x400000; /* unknown 0x200000; * unknown2 0x100000; */ - is_capture_only = !(gpio & 0x008000); /* GPIO15 */ + is_capture_only = !(gpio & 0x008000); /* GPIO15 */ has_tda9820_tda9821 = !(gpio & 0x004000); is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */ /* @@ -2601,7 +2980,7 @@ static void miro_pinnacle_gpio(struct bttv *btv) char *info; gpio_inout(0xffffff, 0); - gpio = gpio_read(); + gpio = gpio_read(); id = ((gpio>>10) & 63) -1; msp = bttv_I2CRead(btv, I2C_MSP3400, "MSP34xx"); if (id < 32) { @@ -2620,10 +2999,10 @@ static void miro_pinnacle_gpio(struct bttv *btv) btv->has_radio = 0; } if (-1 != msp) { - if (btv->c.type == BTTV_MIRO) - btv->c.type = BTTV_MIROPRO; - if (btv->c.type == BTTV_PINNACLE) - btv->c.type = BTTV_PINNACLEPRO; + if (btv->c.type == BTTV_BOARD_MIRO) + btv->c.type = BTTV_BOARD_MIROPRO; + if (btv->c.type == BTTV_BOARD_PINNACLE) + btv->c.type = BTTV_BOARD_PINNACLEPRO; } printk(KERN_INFO "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n", @@ -2664,7 +3043,7 @@ static void miro_pinnacle_gpio(struct bttv *btv) break; } if (-1 != msp) - btv->c.type = BTTV_PINNACLEPRO; + btv->c.type = BTTV_BOARD_PINNACLEPRO; printk(KERN_INFO "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n", btv->c.nr, id, info, btv->has_radio ? "yes" : "no"); @@ -2712,7 +3091,7 @@ static void eagle_muxsel(struct bttv *btv, unsigned int input) static void gvc1100_muxsel(struct bttv *btv, unsigned int input) { - static const int masks[] = {0x30, 0x01, 0x12, 0x23}; + static const int masks[] = {0x30, 0x01, 0x12, 0x23}; gpio_write(masks[input%4]); } @@ -2778,26 +3157,27 @@ static void bttv_reset_audio(struct bttv *btv) void __devinit bttv_init_card1(struct bttv *btv) { switch (btv->c.type) { - case BTTV_HAUPPAUGE: - case BTTV_HAUPPAUGE878: - boot_msp34xx(btv,5); + case BTTV_BOARD_HAUPPAUGE: + case BTTV_BOARD_HAUPPAUGE878: + boot_msp34xx(btv,5); break; - case BTTV_VOODOOTV_FM: - boot_msp34xx(btv,20); + case BTTV_BOARD_VOODOOTV_FM: + boot_msp34xx(btv,20); break; - case BTTV_AVERMEDIA98: + case BTTV_BOARD_AVERMEDIA98: boot_msp34xx(btv,11); break; - case BTTV_HAUPPAUGEPVR: + case BTTV_BOARD_HAUPPAUGEPVR: pvr_boot(btv); break; - case BTTV_TWINHAN_DST: - case BTTV_AVDVBT_771: + case BTTV_BOARD_TWINHAN_DST: + case BTTV_BOARD_AVDVBT_771: + case BTTV_BOARD_PINNACLESAT: btv->use_i2c_hw = 1; break; - case BTTV_ADLINK_RTV24: - init_RTV24( btv ); - break; + case BTTV_BOARD_ADLINK_RTV24: + init_RTV24( btv ); + break; } if (!bttv_tvcards[btv->c.type].has_dvb) @@ -2810,53 +3190,53 @@ void __devinit bttv_init_card2(struct bttv *btv) int tda9887; int addr=ADDR_UNSET; - btv->tuner_type = -1; + btv->tuner_type = -1; - if (BTTV_UNKNOWN == btv->c.type) { + if (BTTV_BOARD_UNKNOWN == btv->c.type) { bttv_readee(btv,eeprom_data,0xa0); identify_by_eeprom(btv,eeprom_data); } switch (btv->c.type) { - case BTTV_MIRO: - case BTTV_MIROPRO: - case BTTV_PINNACLE: - case BTTV_PINNACLEPRO: + case BTTV_BOARD_MIRO: + case BTTV_BOARD_MIROPRO: + case BTTV_BOARD_PINNACLE: + case BTTV_BOARD_PINNACLEPRO: /* miro/pinnacle */ miro_pinnacle_gpio(btv); break; - case BTTV_FLYVIDEO_98: - case BTTV_MAXI: - case BTTV_LIFE_FLYKIT: - case BTTV_FLYVIDEO: - case BTTV_TYPHOON_TVIEW: - case BTTV_CHRONOS_VS2: - case BTTV_FLYVIDEO_98FM: - case BTTV_FLYVIDEO2000: - case BTTV_FLYVIDEO98EZ: - case BTTV_CONFERENCETV: - case BTTV_LIFETEC_9415: + case BTTV_BOARD_FLYVIDEO_98: + case BTTV_BOARD_MAXI: + case BTTV_BOARD_LIFE_FLYKIT: + case BTTV_BOARD_FLYVIDEO: + case BTTV_BOARD_TYPHOON_TVIEW: + case BTTV_BOARD_CHRONOS_VS2: + case BTTV_BOARD_FLYVIDEO_98FM: + case BTTV_BOARD_FLYVIDEO2000: + case BTTV_BOARD_FLYVIDEO98EZ: + case BTTV_BOARD_CONFERENCETV: + case BTTV_BOARD_LIFETEC_9415: flyvideo_gpio(btv); break; - case BTTV_HAUPPAUGE: - case BTTV_HAUPPAUGE878: - case BTTV_HAUPPAUGEPVR: + case BTTV_BOARD_HAUPPAUGE: + case BTTV_BOARD_HAUPPAUGE878: + case BTTV_BOARD_HAUPPAUGEPVR: /* pick up some config infos from the eeprom */ bttv_readee(btv,eeprom_data,0xa0); - hauppauge_eeprom(btv); + hauppauge_eeprom(btv); break; - case BTTV_AVERMEDIA98: - case BTTV_AVPHONE98: + case BTTV_BOARD_AVERMEDIA98: + case BTTV_BOARD_AVPHONE98: bttv_readee(btv,eeprom_data,0xa0); avermedia_eeprom(btv); break; - case BTTV_PXC200: + case BTTV_BOARD_PXC200: init_PXC200(btv); break; - case BTTV_PICOLO_TETRA_CHIP: + case BTTV_BOARD_PICOLO_TETRA_CHIP: picolo_tetra_init(btv); break; - case BTTV_VHX: + case BTTV_BOARD_VHX: btv->has_radio = 1; btv->has_matchbox = 1; btv->mbox_we = 0x20; @@ -2865,58 +3245,58 @@ void __devinit bttv_init_card2(struct bttv *btv) btv->mbox_data = 0x10; btv->mbox_mask = 0x38; break; - case BTTV_VOBIS_BOOSTAR: - case BTTV_TERRATV: + case BTTV_BOARD_VOBIS_BOOSTAR: + case BTTV_BOARD_TERRATV: terratec_active_radio_upgrade(btv); break; - case BTTV_MAGICTVIEW061: + case BTTV_BOARD_MAGICTVIEW061: if (btv->cardid == 0x3002144f) { btv->has_radio=1; printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr); } break; - case BTTV_STB2: - if (btv->cardid == 0x3060121a) { + case BTTV_BOARD_STB2: + if (btv->cardid == 0x3060121a) { /* Fix up entry for 3DFX VoodooTV 100, which is an OEM STB card variant. */ btv->has_radio=0; btv->tuner_type=TUNER_TEMIC_NTSC; } break; - case BTTV_OSPREY1x0: - case BTTV_OSPREY1x0_848: - case BTTV_OSPREY101_848: - case BTTV_OSPREY1x1: - case BTTV_OSPREY1x1_SVID: - case BTTV_OSPREY2xx: - case BTTV_OSPREY2x0_SVID: - case BTTV_OSPREY2x0: - case BTTV_OSPREY500: - case BTTV_OSPREY540: - case BTTV_OSPREY2000: + case BTTV_BOARD_OSPREY1x0: + case BTTV_BOARD_OSPREY1x0_848: + case BTTV_BOARD_OSPREY101_848: + case BTTV_BOARD_OSPREY1x1: + case BTTV_BOARD_OSPREY1x1_SVID: + case BTTV_BOARD_OSPREY2xx: + case BTTV_BOARD_OSPREY2x0_SVID: + case BTTV_BOARD_OSPREY2x0: + case BTTV_BOARD_OSPREY500: + case BTTV_BOARD_OSPREY540: + case BTTV_BOARD_OSPREY2000: bttv_readee(btv,eeprom_data,0xa0); - osprey_eeprom(btv); + osprey_eeprom(btv); break; - case BTTV_IDS_EAGLE: + case BTTV_BOARD_IDS_EAGLE: init_ids_eagle(btv); break; - case BTTV_MODTEC_205: + case BTTV_BOARD_MODTEC_205: bttv_readee(btv,eeprom_data,0xa0); modtec_eeprom(btv); break; - case BTTV_LMLBT4: + case BTTV_BOARD_LMLBT4: init_lmlbt4x(btv); break; - case BTTV_TIBET_CS16: + case BTTV_BOARD_TIBET_CS16: tibetCS16_init(btv); break; - case BTTV_KODICOM_4400R: + case BTTV_BOARD_KODICOM_4400R: kodicom4400r_init(btv); break; } /* pll configuration */ - if (!(btv->id==848 && btv->revision==0x11)) { + if (!(btv->id==848 && btv->revision==0x11)) { /* defaults from card list */ if (PLL_28 == bttv_tvcards[btv->c.type].pll) { btv->pll.pll_ifreq=28636363; @@ -2927,26 +3307,26 @@ void __devinit bttv_init_card2(struct bttv *btv) btv->pll.pll_crystal=BT848_IFORM_XT1; } /* insmod options can override */ - switch (pll[btv->c.nr]) { - case 0: /* none */ + switch (pll[btv->c.nr]) { + case 0: /* none */ btv->pll.pll_crystal = 0; btv->pll.pll_ifreq = 0; btv->pll.pll_ofreq = 0; - break; - case 1: /* 28 MHz */ + break; + case 1: /* 28 MHz */ case 28: - btv->pll.pll_ifreq = 28636363; + btv->pll.pll_ifreq = 28636363; btv->pll.pll_ofreq = 0; - btv->pll.pll_crystal = BT848_IFORM_XT0; - break; - case 2: /* 35 MHz */ + btv->pll.pll_crystal = BT848_IFORM_XT0; + break; + case 2: /* 35 MHz */ case 35: - btv->pll.pll_ifreq = 35468950; + btv->pll.pll_ifreq = 35468950; btv->pll.pll_ofreq = 0; - btv->pll.pll_crystal = BT848_IFORM_XT1; - break; - } - } + btv->pll.pll_crystal = BT848_IFORM_XT1; + break; + } + } btv->pll.pll_current = -1; /* tuner configuration (from card list / autodetect / insmod option) */ @@ -2955,23 +3335,26 @@ void __devinit bttv_init_card2(struct bttv *btv) if (UNSET != bttv_tvcards[btv->c.type].tuner_type) if(UNSET == btv->tuner_type) - btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type; + btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type; if (UNSET != tuner[btv->c.nr]) btv->tuner_type = tuner[btv->c.nr]; printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type); - if (btv->pinnacle_id != UNSET) - bttv_call_i2c_clients(btv, AUDC_CONFIG_PINNACLE, - &btv->pinnacle_id); + if (btv->tuner_type != UNSET) { - struct tuner_setup tun_setup; + struct tuner_setup tun_setup; - tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV; + tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; tun_setup.type = btv->tuner_type; tun_setup.addr = addr; bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup); } + if (btv->pinnacle_id != UNSET) { + bttv_call_i2c_clients(btv, AUDC_CONFIG_PINNACLE, + &btv->pinnacle_id); + } + btv->svhs = bttv_tvcards[btv->c.type].svhs; if (svhs[btv->c.nr] != UNSET) btv->svhs = svhs[btv->c.nr]; @@ -2982,8 +3365,8 @@ void __devinit bttv_init_card2(struct bttv *btv) btv->has_radio=1; if (bttv_tvcards[btv->c.type].has_remote) btv->has_remote=1; - if (bttv_tvcards[btv->c.type].no_gpioirq) - btv->gpioirq=0; + if (!bttv_tvcards[btv->c.type].no_gpioirq) + btv->gpioirq=1; if (bttv_tvcards[btv->c.type].audio_hook) btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook; @@ -3024,6 +3407,9 @@ void __devinit bttv_init_card2(struct bttv *btv) if (0 == tda9887 && 0 == bttv_tvcards[btv->c.type].has_dvb && bttv_I2CRead(btv, I2C_TDA9887, "TDA9887") >=0) tda9887 = 1; + /* Hybrid DVB card, DOES have a tda9887 */ + if (btv->c.type == BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE) + tda9887 = 1; if((btv->tuner_type == TUNER_PHILIPS_FM1216ME_MK3) || (btv->tuner_type == TUNER_PHILIPS_FM1236_MK3) || (btv->tuner_type == TUNER_PHILIPS_FM1256_IH3) || @@ -3045,11 +3431,11 @@ static void modtec_eeprom(struct bttv *btv) } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) { btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I; printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n", - btv->c.nr,&eeprom_data[0x1e]); - } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) { - btv->tuner_type=TUNER_PHILIPS_NTSC; - printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n", - btv->c.nr,&eeprom_data[0x1e]); + btv->c.nr,&eeprom_data[0x1e]); + } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) { + btv->tuner_type=TUNER_PHILIPS_NTSC; + printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n", + btv->c.nr,&eeprom_data[0x1e]); } else { printk("bttv%d: Modtec: Unknown TunerString: %s\n", btv->c.nr,&eeprom_data[0x1e]); @@ -3114,7 +3500,7 @@ static int terratec_active_radio_upgrade(struct bttv *btv) static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen) { u32 n; - u8 bits; + u8 bits; int i; gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG); @@ -3150,19 +3536,19 @@ static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen) static int __devinit pvr_boot(struct bttv *btv) { - const struct firmware *fw_entry; + const struct firmware *fw_entry; int rc; rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev); if (rc != 0) { printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n", btv->c.nr); - return rc; - } + return rc; + } rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size); printk(KERN_INFO "bttv%d: altera firmware upload %s\n", btv->c.nr, (rc < 0) ? "failed" : "ok"); - release_firmware(fw_entry); + release_firmware(fw_entry); return rc; } @@ -3176,33 +3562,33 @@ static void __devinit osprey_eeprom(struct bttv *btv) unsigned long serial = 0; if (btv->c.type == 0) { - /* this might be an antique... check for MMAC label in eeprom */ - if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) { - unsigned char checksum = 0; - for (i =0; i<21; i++) + /* this might be an antique... check for MMAC label in eeprom */ + if ((ee[0]=='M') && (ee[1]=='M') && (ee[2]=='A') && (ee[3]=='C')) { + unsigned char checksum = 0; + for (i =0; i<21; i++) checksum += ee[i]; - if (checksum != ee[21]) + if (checksum != ee[21]) return; - btv->c.type = BTTV_OSPREY1x0_848; + btv->c.type = BTTV_BOARD_OSPREY1x0_848; for (i = 12; i < 21; i++) serial *= 10, serial += ee[i] - '0'; - } + } } else { unsigned short type; - int offset = 4*16; - - for(; offset < 8*16; offset += 16) { - unsigned short checksum = 0; - /* verify the checksum */ - for(i = 0; i<14; i++) checksum += ee[i+offset]; - checksum = ~checksum; /* no idea why */ - if ((((checksum>>8)&0x0FF) == ee[offset+14]) && - ((checksum & 0x0FF) == ee[offset+15])) { - break; - } - } - - if (offset >= 8*16) + int offset = 4*16; + + for(; offset < 8*16; offset += 16) { + unsigned short checksum = 0; + /* verify the checksum */ + for(i = 0; i<14; i++) checksum += ee[i+offset]; + checksum = ~checksum; /* no idea why */ + if ((((checksum>>8)&0x0FF) == ee[offset+14]) && + ((checksum & 0x0FF) == ee[offset+15])) { + break; + } + } + + if (offset >= 8*16) return; /* found a valid descriptor */ @@ -3212,47 +3598,47 @@ static void __devinit osprey_eeprom(struct bttv *btv) /* 848 based */ case 0x0004: - btv->c.type = BTTV_OSPREY1x0_848; + btv->c.type = BTTV_BOARD_OSPREY1x0_848; break; case 0x0005: - btv->c.type = BTTV_OSPREY101_848; + btv->c.type = BTTV_BOARD_OSPREY101_848; break; - /* 878 based */ + /* 878 based */ case 0x0012: case 0x0013: - btv->c.type = BTTV_OSPREY1x0; + btv->c.type = BTTV_BOARD_OSPREY1x0; break; case 0x0014: case 0x0015: - btv->c.type = BTTV_OSPREY1x1; + btv->c.type = BTTV_BOARD_OSPREY1x1; break; case 0x0016: case 0x0017: case 0x0020: - btv->c.type = BTTV_OSPREY1x1_SVID; + btv->c.type = BTTV_BOARD_OSPREY1x1_SVID; break; case 0x0018: case 0x0019: case 0x001E: case 0x001F: - btv->c.type = BTTV_OSPREY2xx; + btv->c.type = BTTV_BOARD_OSPREY2xx; break; case 0x001A: case 0x001B: - btv->c.type = BTTV_OSPREY2x0_SVID; + btv->c.type = BTTV_BOARD_OSPREY2x0_SVID; break; case 0x0040: - btv->c.type = BTTV_OSPREY500; + btv->c.type = BTTV_BOARD_OSPREY500; break; case 0x0050: case 0x0056: - btv->c.type = BTTV_OSPREY540; + btv->c.type = BTTV_BOARD_OSPREY540; /* bttv_osprey_540_init(btv); */ break; case 0x0060: case 0x0070: - btv->c.type = BTTV_OSPREY2x0; + btv->c.type = BTTV_BOARD_OSPREY2x0; /* enable output on select control lines */ gpio_inout(0xffffff,0x000303); break; @@ -3274,27 +3660,27 @@ static void __devinit osprey_eeprom(struct bttv *btv) /* AVermedia specific stuff, from bktr_card.c */ static int tuner_0_table[] = { - TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/, - TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/, - TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, - TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, - TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL, + TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/, + TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/, + TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, + TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, + TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL, TUNER_PHILIPS_FM1216ME_MK3 }; static int tuner_1_table[] = { - TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL, + TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, - TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */ - TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL}; + TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */ + TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL}; static void __devinit avermedia_eeprom(struct bttv *btv) { - int tuner_make,tuner_tv_fm,tuner_format,tuner=0; + int tuner_make,tuner_tv_fm,tuner_format,tuner=0; tuner_make = (eeprom_data[0x41] & 0x7); - tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; - tuner_format = (eeprom_data[0x42] & 0xf0) >> 4; + tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; + tuner_format = (eeprom_data[0x42] & 0xf0) >> 4; btv->has_remote = (eeprom_data[0x42] & 0x01); if (tuner_make == 0 || tuner_make == 2) @@ -3325,13 +3711,13 @@ void bttv_tda9880_setnorm(struct bttv *btv, int norm) { /* fix up our card entry */ if(norm==VIDEO_MODE_NTSC) { - bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff; - bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff; + bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x957fff; + bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x957fff; dprintk("bttv_tda9880_setnorm to NTSC\n"); } else { - bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x947fff; - bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff; + bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[0]=0x947fff; + bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].audiomux[4]=0x947fff; dprintk("bttv_tda9880_setnorm to PAL\n"); } /* set GPIO according */ @@ -3342,7 +3728,7 @@ void bttv_tda9880_setnorm(struct bttv *btv, int norm) /* * reset/enable the MSP on some Hauppauge cards - * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)! + * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)! * * Hauppauge: pin 5 * Voodoo: pin 20 @@ -3353,7 +3739,7 @@ static void __devinit boot_msp34xx(struct bttv *btv, int pin) gpio_inout(mask,mask); gpio_bits(mask,0); - udelay(2500); + udelay(2500); gpio_bits(mask,mask); if (bttv_gpio) @@ -3429,7 +3815,7 @@ static void __devinit init_PXC200(struct bttv *btv) udelay(10); gpio_write(1<<2); - for (i = 0; i < ARRAY_SIZE(vals); i++) { + for (i = 0; i < ARRAY_SIZE(vals); i++) { tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1); if (tmp != -1) { printk(KERN_INFO @@ -3872,30 +4258,30 @@ avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set) static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set) { - int val = 0; + int val = 0; - if (gpio_read() & 0x4000) { + if (gpio_read() & 0x4000) { v->mode = VIDEO_SOUND_MONO; return; } - if (set) { - if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */ - val = 0x0080; + if (set) { + if (v->mode & VIDEO_SOUND_LANG2) /* A2 SAP */ + val = 0x0080; if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */ - val = 0x0880; - if ((v->mode & VIDEO_SOUND_LANG1) || + val = 0x0880; + if ((v->mode & VIDEO_SOUND_LANG1) || (v->mode & VIDEO_SOUND_MONO)) val = 0; gpio_bits(0x0880, val); - if (bttv_gpio) - bttv_gpio_tracking(btv,"lt9415"); - } else { + if (bttv_gpio) + bttv_gpio_tracking(btv,"lt9415"); + } else { /* autodetect doesn't work with this card :-( */ - v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | + v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; - return; - } + return; + } } /* TDA9821 on TerraTV+ Bt848, Bt878 */ @@ -4018,26 +4404,26 @@ fv2000s_audio(struct bttv *btv, struct video_audio *v, int set) static void windvr_audio(struct bttv *btv, struct video_audio *v, int set) { - unsigned long val = 0; - - if (set) { - if (v->mode & VIDEO_SOUND_MONO) - val = 0x040000; - if (v->mode & VIDEO_SOUND_LANG1) - val = 0; - if (v->mode & VIDEO_SOUND_LANG2) - val = 0x100000; - if (v->mode & VIDEO_SOUND_STEREO) - val = 0; - if (val) { + unsigned long val = 0; + + if (set) { + if (v->mode & VIDEO_SOUND_MONO) + val = 0x040000; + if (v->mode & VIDEO_SOUND_LANG1) + val = 0; + if (v->mode & VIDEO_SOUND_LANG2) + val = 0x100000; + if (v->mode & VIDEO_SOUND_STEREO) + val = 0; + if (val) { gpio_bits(0x140000, val); - if (bttv_gpio) - bttv_gpio_tracking(btv,"windvr"); - } - } else { - v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | - VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; - } + if (bttv_gpio) + bttv_gpio_tracking(btv,"windvr"); + } + } else { + v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO | + VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2; + } } /* @@ -4280,10 +4666,10 @@ static void kodicom4400r_init(struct bttv *btv) static void xguard_muxsel(struct bttv *btv, unsigned int input) { static const int masks[] = { - ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10, - ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10, - ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11, - ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11, + ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10, + ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10, + ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11, + ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11, }; gpio_write(masks[input%16]); } @@ -4388,10 +4774,10 @@ static void ivc120_muxsel(struct bttv *btv, unsigned int input) static void PXC200_muxsel(struct bttv *btv, unsigned int input) { - int rc; + int rc; long mux; int bitmask; - unsigned char buf[2]; + unsigned char buf[2]; /* Read PIC config to determine if this is a PXC200F */ /* PX_I2C_CMD_CFG*/ @@ -4421,14 +4807,14 @@ static void PXC200_muxsel(struct bttv *btv, unsigned int input) /* bitmask=0x30f; */ bitmask=0x302; /* check whether we have a PXC200A */ - if (btv->cardid == PX_PXC200A_CARDID) { + if (btv->cardid == PX_PXC200A_CARDID) { bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */ bitmask |= 7<<4; /* the DAC */ } btwrite(bitmask, BT848_GPIO_OUT_EN); bitmask = btread(BT848_GPIO_DATA); - if (btv->cardid == PX_PXC200A_CARDID) + if (btv->cardid == PX_PXC200A_CARDID) bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7); else /* older device */ bitmask = (bitmask & ~0x300) | ((mux & 3) << 8); @@ -4441,7 +4827,7 @@ static void PXC200_muxsel(struct bttv *btv, unsigned int input) * * needed because bttv-driver sets mux before calling this function */ - if (btv->cardid == PX_PXC200A_CARDID) + if (btv->cardid == PX_PXC200A_CARDID) btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM); else /* older device */ btand(~BT848_IFORM_MUXSEL,BT848_IFORM); @@ -4485,10 +4871,9 @@ void __devinit bttv_check_chipset(void) } if (UNSET != latency) printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency); - - while ((dev = pci_find_device(PCI_VENDOR_ID_INTEL, + while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, dev))) { - unsigned char b; + unsigned char b; pci_read_config_byte(dev, 0x53, &b); if (bttv_debug) printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, " @@ -4498,7 +4883,7 @@ void __devinit bttv_check_chipset(void) int __devinit bttv_handle_chipset(struct bttv *btv) { - unsigned char command; + unsigned char command; if (!triton1 && !vsfx && UNSET == latency) return 0; @@ -4519,13 +4904,13 @@ int __devinit bttv_handle_chipset(struct bttv *btv) btv->triton1 = BT848_INT_ETBF; } else { /* bt878 has a bit in the pci config space for it */ - pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command); + pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command); if (triton1) command |= BT878_EN_TBFX; if (vsfx) command |= BT878_EN_VSFX; - pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command); - } + pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command); + } if (UNSET != latency) pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency); return 0; diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bttv-driver.c index d538a994ff04..0005741d5514 100644 --- a/drivers/media/video/bttv-driver.c +++ b/drivers/media/video/bttv-driver.c @@ -3,7 +3,7 @@ bttv - Bt848 frame grabber driver Copyright (C) 1996,97,98 Ralph Metzler <rjkm@thp.uni-koeln.de> - & Marcus Metzler <mocm@thp.uni-koeln.de> + & Marcus Metzler <mocm@thp.uni-koeln.de> (c) 1999-2002 Gerd Knorr <kraxel@bytesex.org> some v4l2 code lines are taken from Justin's bttv2 driver which is @@ -192,8 +192,8 @@ static u8 SRAM_Table[][60] = const struct bttv_tvnorm bttv_tvnorms[] = { /* PAL-BDGHI */ - /* max. active video is actually 922, but 924 is divisible by 4 and 3! */ - /* actually, max active PAL with HSCALE=0 is 948, NTSC is 768 - nil */ + /* max. active video is actually 922, but 924 is divisible by 4 and 3! */ + /* actually, max active PAL with HSCALE=0 is 948, NTSC is 768 - nil */ { .v4l2_id = V4L2_STD_PAL, .name = "PAL", @@ -806,9 +806,9 @@ static void bt848A_set_timing(struct bttv *btv) btv->c.nr,table_idx); /* timing change...reset timing generator address */ - btwrite(0x00, BT848_TGCTRL); - btwrite(0x02, BT848_TGCTRL); - btwrite(0x00, BT848_TGCTRL); + btwrite(0x00, BT848_TGCTRL); + btwrite(0x02, BT848_TGCTRL); + btwrite(0x00, BT848_TGCTRL); len=SRAM_Table[table_idx][0]; for(i = 1; i <= len; i++) @@ -847,7 +847,7 @@ static void bt848_hue(struct bttv *btv, int hue) /* -128 to 127 */ value = (hue >> 8) - 128; - btwrite(value & 0xff, BT848_HUE); + btwrite(value & 0xff, BT848_HUE); } static void bt848_contrast(struct bttv *btv, int cont) @@ -859,9 +859,9 @@ static void bt848_contrast(struct bttv *btv, int cont) /* 0-511 */ value = (cont >> 7); hibit = (value >> 6) & 4; - btwrite(value & 0xff, BT848_CONTRAST_LO); - btaor(hibit, ~4, BT848_E_CONTROL); - btaor(hibit, ~4, BT848_O_CONTROL); + btwrite(value & 0xff, BT848_CONTRAST_LO); + btaor(hibit, ~4, BT848_E_CONTROL); + btaor(hibit, ~4, BT848_O_CONTROL); } static void bt848_sat(struct bttv *btv, int color) @@ -873,12 +873,12 @@ static void bt848_sat(struct bttv *btv, int color) /* 0-511 for the color */ val_u = ((color * btv->opt_uv_ratio) / 50) >> 7; val_v = (((color * (100 - btv->opt_uv_ratio) / 50) >>7)*180L)/254; - hibits = (val_u >> 7) & 2; + hibits = (val_u >> 7) & 2; hibits |= (val_v >> 8) & 1; - btwrite(val_u & 0xff, BT848_SAT_U_LO); - btwrite(val_v & 0xff, BT848_SAT_V_LO); - btaor(hibits, ~3, BT848_E_CONTROL); - btaor(hibits, ~3, BT848_O_CONTROL); + btwrite(val_u & 0xff, BT848_SAT_U_LO); + btwrite(val_v & 0xff, BT848_SAT_V_LO); + btaor(hibits, ~3, BT848_E_CONTROL); + btaor(hibits, ~3, BT848_O_CONTROL); } /* ----------------------------------------------------------------------- */ @@ -891,7 +891,7 @@ video_mux(struct bttv *btv, unsigned int input) if (input >= bttv_tvcards[btv->c.type].video_inputs) return -EINVAL; - /* needed by RemoteVideo MX */ + /* needed by RemoteVideo MX */ mask2 = bttv_tvcards[btv->c.type].gpiomask2; if (mask2) gpio_inout(mask2,mask2); @@ -964,7 +964,7 @@ i2c_vidiocschan(struct bttv *btv) c.norm = btv->tvnorm; c.channel = btv->input; bttv_call_i2c_clients(btv,VIDIOCSCHAN,&c); - if (btv->c.type == BTTV_VOODOOTV_FM) + if (btv->c.type == BTTV_BOARD_VOODOOTV_FM) bttv_tda9880_setnorm(btv,c.norm); } @@ -988,7 +988,7 @@ set_tvnorm(struct bttv *btv, unsigned int norm) bt848A_set_timing(btv); switch (btv->c.type) { - case BTTV_VOODOOTV_FM: + case BTTV_BOARD_VOODOOTV_FM: bttv_tda9880_setnorm(btv,norm); break; } @@ -1055,22 +1055,22 @@ static void init_bt848(struct bttv *btv) btwrite(BT848_COLOR_CTL_GAMMA, BT848_COLOR_CTL); btwrite(BT848_IFORM_XTAUTO | BT848_IFORM_AUTO, BT848_IFORM); - /* set planar and packed mode trigger points and */ - /* set rising edge of inverted GPINTR pin as irq trigger */ - btwrite(BT848_GPIO_DMA_CTL_PKTP_32| - BT848_GPIO_DMA_CTL_PLTP1_16| - BT848_GPIO_DMA_CTL_PLTP23_16| - BT848_GPIO_DMA_CTL_GPINTC| - BT848_GPIO_DMA_CTL_GPINTI, - BT848_GPIO_DMA_CTL); + /* set planar and packed mode trigger points and */ + /* set rising edge of inverted GPINTR pin as irq trigger */ + btwrite(BT848_GPIO_DMA_CTL_PKTP_32| + BT848_GPIO_DMA_CTL_PLTP1_16| + BT848_GPIO_DMA_CTL_PLTP23_16| + BT848_GPIO_DMA_CTL_GPINTC| + BT848_GPIO_DMA_CTL_GPINTI, + BT848_GPIO_DMA_CTL); val = btv->opt_chroma_agc ? BT848_SCLOOP_CAGC : 0; - btwrite(val, BT848_E_SCLOOP); - btwrite(val, BT848_O_SCLOOP); + btwrite(val, BT848_E_SCLOOP); + btwrite(val, BT848_O_SCLOOP); - btwrite(0x20, BT848_E_VSCALE_HI); - btwrite(0x20, BT848_O_VSCALE_HI); - btwrite(BT848_ADC_RESERVED | (btv->opt_adc_crush ? BT848_ADC_CRUSH : 0), + btwrite(0x20, BT848_E_VSCALE_HI); + btwrite(0x20, BT848_O_VSCALE_HI); + btwrite(BT848_ADC_RESERVED | (btv->opt_adc_crush ? BT848_ADC_CRUSH : 0), BT848_ADC); btwrite(whitecrush_upper, BT848_WC_UP); @@ -1089,7 +1089,7 @@ static void init_bt848(struct bttv *btv) bt848_contrast(btv, btv->contrast); bt848_sat(btv, btv->saturation); - /* interrupt */ + /* interrupt */ init_irqreg(btv); } @@ -1105,7 +1105,7 @@ static void bttv_reinit_bt848(struct bttv *btv) spin_unlock_irqrestore(&btv->s_lock,flags); init_bt848(btv); - btv->pll.pll_current = -1; + btv->pll.pll_current = -1; set_input(btv,btv->input); } @@ -1398,7 +1398,7 @@ bttv_switch_overlay(struct bttv *btv, struct bttv_fh *fh, /* video4linux (1) interface */ static int bttv_prepare_buffer(struct bttv *btv, struct bttv_buffer *buf, - const struct bttv_format *fmt, + const struct bttv_format *fmt, unsigned int width, unsigned int height, enum v4l2_field field) { @@ -1521,8 +1521,8 @@ static const char *v4l1_ioctls[] = { static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg) { switch (cmd) { - case BTTV_VERSION: - return BTTV_VERSION_CODE; + case BTTV_VERSION: + return BTTV_VERSION_CODE; /* *** v4l1 *** ************************************************ */ case VIDIOCGFREQ: @@ -1576,32 +1576,32 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg) return 0; } - case VIDIOCGCHAN: - { - struct video_channel *v = arg; + case VIDIOCGCHAN: + { + struct video_channel *v = arg; unsigned int channel = v->channel; - if (channel >= bttv_tvcards[btv->c.type].video_inputs) - return -EINVAL; - v->tuners=0; - v->flags = VIDEO_VC_AUDIO; - v->type = VIDEO_TYPE_CAMERA; - v->norm = btv->tvnorm; + if (channel >= bttv_tvcards[btv->c.type].video_inputs) + return -EINVAL; + v->tuners=0; + v->flags = VIDEO_VC_AUDIO; + v->type = VIDEO_TYPE_CAMERA; + v->norm = btv->tvnorm; if (channel == bttv_tvcards[btv->c.type].tuner) { - strcpy(v->name,"Television"); - v->flags|=VIDEO_VC_TUNER; - v->type=VIDEO_TYPE_TV; - v->tuners=1; - } else if (channel == btv->svhs) { - strcpy(v->name,"S-Video"); - } else { - sprintf(v->name,"Composite%d",channel); + strcpy(v->name,"Television"); + v->flags|=VIDEO_VC_TUNER; + v->type=VIDEO_TYPE_TV; + v->tuners=1; + } else if (channel == btv->svhs) { + strcpy(v->name,"S-Video"); + } else { + sprintf(v->name,"Composite%d",channel); } return 0; - } - case VIDIOCSCHAN: - { - struct video_channel *v = arg; + } + case VIDIOCSCHAN: + { + struct video_channel *v = arg; unsigned int channel = v->channel; if (channel >= bttv_tvcards[btv->c.type].video_inputs) @@ -1623,7 +1623,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg) return 0; } - case VIDIOCGAUDIO: + case VIDIOCGAUDIO: { struct video_audio *v = arg; @@ -1728,7 +1728,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg) } else if (i->index == btv->svhs) { sprintf(i->name, "S-Video"); } else { - sprintf(i->name,"Composite%d",i->index); + sprintf(i->name,"Composite%d",i->index); } if (i->index == btv->input) { __u32 dstatus = btread(BT848_DSTATUS); @@ -1851,6 +1851,11 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg) up(&btv->lock); return 0; } + case VIDIOC_LOG_STATUS: + { + bttv_call_i2c_clients(btv, VIDIOC_LOG_STATUS, 0); + return 0; + } default: return -ENOIOCTLCMD; @@ -2163,7 +2168,7 @@ static int bttv_s_fmt(struct bttv_fh *fh, struct bttv *btv, if (0 != retval) return retval; if (locked_btres(fh->btv, RESOURCE_VBI)) - return -EBUSY; + return -EBUSY; bttv_vbi_try_fmt(fh,f); bttv_vbi_setlines(fh,btv,f->fmt.vbi.count[0]); bttv_vbi_get_fmt(fh,f); @@ -2201,9 +2206,9 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, bttv_reinit_bt848(btv); switch (cmd) { - case VIDIOCSFREQ: - case VIDIOCSTUNER: - case VIDIOCSCHAN: + case VIDIOCSFREQ: + case VIDIOCSTUNER: + case VIDIOCSCHAN: case VIDIOC_S_CTRL: case VIDIOC_S_STD: case VIDIOC_S_INPUT: @@ -2219,10 +2224,10 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, /* *** v4l1 *** ************************************************ */ case VIDIOCGCAP: { - struct video_capability *cap = arg; + struct video_capability *cap = arg; memset(cap,0,sizeof(*cap)); - strcpy(cap->name,btv->video_dev->name); + strcpy(cap->name,btv->video_dev->name); if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) { /* vbi */ cap->type = VID_TYPE_TUNER|VID_TYPE_TELETEXT; @@ -2242,7 +2247,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, } cap->channels = bttv_tvcards[btv->c.type].video_inputs; cap->audios = bttv_tvcards[btv->c.type].audio_inputs; - return 0; + return 0; } case VIDIOCGPICT: @@ -2291,7 +2296,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, bt848_hue(btv,pic->hue); bt848_sat(btv,pic->colour); up(&fh->cap.lock); - return 0; + return 0; } case VIDIOCGWIN: @@ -2352,8 +2357,8 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, unsigned long end; if(!capable(CAP_SYS_ADMIN) && - !capable(CAP_SYS_RAWIO)) - return -EPERM; + !capable(CAP_SYS_RAWIO)) + return -EPERM; end = (unsigned long)fbuf->base + fbuf->height * fbuf->bytesperline; down(&fh->cap.lock); @@ -2427,7 +2432,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, } /* switch over */ - retval = bttv_switch_overlay(btv,fh,new); + retval = bttv_switch_overlay(btv,fh,new); up(&fh->cap.lock); return retval; } @@ -2566,13 +2571,13 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, return 0; } - case BTTV_VERSION: - case VIDIOCGFREQ: - case VIDIOCSFREQ: - case VIDIOCGTUNER: - case VIDIOCSTUNER: - case VIDIOCGCHAN: - case VIDIOCSCHAN: + case BTTV_VERSION: + case VIDIOCGFREQ: + case VIDIOCSFREQ: + case VIDIOCGTUNER: + case VIDIOCSTUNER: + case VIDIOCGCHAN: + case VIDIOCSCHAN: case VIDIOCGAUDIO: case VIDIOCSAUDIO: return bttv_common_ioctls(btv,cmd,arg); @@ -2584,8 +2589,8 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, if (0 == v4l2) return -EINVAL; - strcpy(cap->driver,"bttv"); - strlcpy(cap->card,btv->video_dev->name,sizeof(cap->card)); + strcpy(cap->driver,"bttv"); + strlcpy(cap->card,btv->video_dev->name,sizeof(cap->card)); sprintf(cap->bus_info,"PCI:%s",pci_name(btv->c.pci)); cap->version = BTTV_VERSION_CODE; cap->capabilities = @@ -2856,6 +2861,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file, case VIDIOC_S_TUNER: case VIDIOC_G_FREQUENCY: case VIDIOC_S_FREQUENCY: + case VIDIOC_LOG_STATUS: return bttv_common_ioctls(btv,cmd,arg); default: @@ -3091,7 +3097,7 @@ static struct video_device bttv_video_template = { .name = "UNSET", .type = VID_TYPE_CAPTURE|VID_TYPE_TUNER| - VID_TYPE_CLIPPING|VID_TYPE_SCALES, + VID_TYPE_CLIPPING|VID_TYPE_SCALES, .hardware = VID_HARDWARE_BT848, .fops = &bttv_fops, .minor = -1, @@ -3137,7 +3143,7 @@ static int radio_open(struct inode *inode, struct file *file) audio_mux(btv,AUDIO_RADIO); up(&btv->lock); - return 0; + return 0; } static int radio_release(struct inode *inode, struct file *file) @@ -3160,34 +3166,34 @@ static int radio_do_ioctl(struct inode *inode, struct file *file, switch (cmd) { case VIDIOCGCAP: { - struct video_capability *cap = arg; + struct video_capability *cap = arg; memset(cap,0,sizeof(*cap)); - strcpy(cap->name,btv->radio_dev->name); - cap->type = VID_TYPE_TUNER; + strcpy(cap->name,btv->radio_dev->name); + cap->type = VID_TYPE_TUNER; cap->channels = 1; cap->audios = 1; - return 0; + return 0; } - case VIDIOCGTUNER: - { - struct video_tuner *v = arg; + case VIDIOCGTUNER: + { + struct video_tuner *v = arg; - if(v->tuner) - return -EINVAL; + if(v->tuner) + return -EINVAL; memset(v,0,sizeof(*v)); - strcpy(v->name, "Radio"); - bttv_call_i2c_clients(btv,cmd,v); - return 0; - } - case VIDIOCSTUNER: + strcpy(v->name, "Radio"); + bttv_call_i2c_clients(btv,cmd,v); + return 0; + } + case VIDIOCSTUNER: /* nothing to do */ return 0; case BTTV_VERSION: - case VIDIOCGFREQ: - case VIDIOCSFREQ: + case VIDIOCGFREQ: + case VIDIOCSFREQ: case VIDIOCGAUDIO: case VIDIOCSAUDIO: return bttv_common_ioctls(btv,cmd,arg); @@ -3693,7 +3699,7 @@ static irqreturn_t bttv_irq(int irq, void *dev_id, struct pt_regs * regs) } if (astat&BT848_INT_VSYNC) - btv->field_count++; + btv->field_count++; if (astat & BT848_INT_GPINT) { wake_up(&btv->gpioq); @@ -3705,13 +3711,13 @@ static irqreturn_t bttv_irq(int irq, void *dev_id, struct pt_regs * regs) wake_up(&btv->i2c_queue); } - if ((astat & BT848_INT_RISCI) && (stat & (4<<28))) + if ((astat & BT848_INT_RISCI) && (stat & (4<<28))) bttv_irq_switch_vbi(btv); - if ((astat & BT848_INT_RISCI) && (stat & (2<<28))) + if ((astat & BT848_INT_RISCI) && (stat & (2<<28))) bttv_irq_wakeup_top(btv); - if ((astat & BT848_INT_RISCI) && (stat & (1<<28))) + if ((astat & BT848_INT_RISCI) && (stat & (1<<28))) bttv_irq_switch_video(btv); if ((astat & BT848_INT_HLOCK) && btv->opt_automute) @@ -3736,10 +3742,22 @@ static irqreturn_t bttv_irq(int irq, void *dev_id, struct pt_regs * regs) count++; if (count > 4) { - btwrite(0, BT848_INT_MASK); - printk(KERN_ERR - "bttv%d: IRQ lockup, cleared int mask [", btv->c.nr); + + if (count > 8 || !(astat & BT848_INT_GPINT)) { + btwrite(0, BT848_INT_MASK); + + printk(KERN_ERR + "bttv%d: IRQ lockup, cleared int mask [", btv->c.nr); + } else { + printk(KERN_ERR + "bttv%d: IRQ lockup, clearing GPINT from int mask [", btv->c.nr); + + btwrite(btread(BT848_INT_MASK) & (-1 ^ BT848_INT_GPINT), + BT848_INT_MASK); + }; + bttv_print_irqbits(stat,astat); + printk("]\n"); } } @@ -3808,7 +3826,7 @@ static int __devinit bttv_register_video(struct bttv *btv) /* video */ btv->video_dev = vdev_init(btv, &bttv_video_template, "video"); - if (NULL == btv->video_dev) + if (NULL == btv->video_dev) goto err; if (video_register_device(btv->video_dev,VFL_TYPE_GRABBER,video_nr)<0) goto err; @@ -3818,18 +3836,18 @@ static int __devinit bttv_register_video(struct bttv *btv) /* vbi */ btv->vbi_dev = vdev_init(btv, &bttv_vbi_template, "vbi"); - if (NULL == btv->vbi_dev) + if (NULL == btv->vbi_dev) goto err; - if (video_register_device(btv->vbi_dev,VFL_TYPE_VBI,vbi_nr)<0) + if (video_register_device(btv->vbi_dev,VFL_TYPE_VBI,vbi_nr)<0) goto err; printk(KERN_INFO "bttv%d: registered device vbi%d\n", btv->c.nr,btv->vbi_dev->minor & 0x1f); - if (!btv->has_radio) + if (!btv->has_radio) return 0; /* radio */ btv->radio_dev = vdev_init(btv, &radio_template, "radio"); - if (NULL == btv->radio_dev) + if (NULL == btv->radio_dev) goto err; if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO,radio_nr)<0) goto err; @@ -3850,11 +3868,11 @@ static int __devinit bttv_register_video(struct bttv *btv) static void pci_set_command(struct pci_dev *dev) { #if defined(__powerpc__) - unsigned int cmd; + unsigned int cmd; - pci_read_config_dword(dev, PCI_COMMAND, &cmd); - cmd = (cmd | PCI_COMMAND_MEMORY ); - pci_write_config_dword(dev, PCI_COMMAND, cmd); + pci_read_config_dword(dev, PCI_COMMAND, &cmd); + cmd = (cmd | PCI_COMMAND_MEMORY ); + pci_write_config_dword(dev, PCI_COMMAND, cmd); #endif } @@ -3868,63 +3886,62 @@ static int __devinit bttv_probe(struct pci_dev *dev, if (bttv_num == BTTV_MAX) return -ENOMEM; printk(KERN_INFO "bttv: Bt8xx card found (%d).\n", bttv_num); - btv=&bttvs[bttv_num]; + btv=&bttvs[bttv_num]; memset(btv,0,sizeof(*btv)); btv->c.nr = bttv_num; sprintf(btv->c.name,"bttv%d",btv->c.nr); /* initialize structs / fill in defaults */ - init_MUTEX(&btv->lock); - init_MUTEX(&btv->reslock); - spin_lock_init(&btv->s_lock); - spin_lock_init(&btv->gpio_lock); - init_waitqueue_head(&btv->gpioq); - init_waitqueue_head(&btv->i2c_queue); - INIT_LIST_HEAD(&btv->c.subs); - INIT_LIST_HEAD(&btv->capture); - INIT_LIST_HEAD(&btv->vcapture); + init_MUTEX(&btv->lock); + init_MUTEX(&btv->reslock); + spin_lock_init(&btv->s_lock); + spin_lock_init(&btv->gpio_lock); + init_waitqueue_head(&btv->gpioq); + init_waitqueue_head(&btv->i2c_queue); + INIT_LIST_HEAD(&btv->c.subs); + INIT_LIST_HEAD(&btv->capture); + INIT_LIST_HEAD(&btv->vcapture); v4l2_prio_init(&btv->prio); init_timer(&btv->timeout); btv->timeout.function = bttv_irq_timeout; btv->timeout.data = (unsigned long)btv; - btv->i2c_rc = -1; - btv->tuner_type = UNSET; - btv->pinnacle_id = UNSET; + btv->i2c_rc = -1; + btv->tuner_type = UNSET; + btv->pinnacle_id = UNSET; btv->new_input = UNSET; - btv->gpioirq = 1; btv->has_radio=radio[btv->c.nr]; /* pci stuff (init, get irq/mmio, ... */ btv->c.pci = dev; - btv->id = dev->device; + btv->id = dev->device; if (pci_enable_device(dev)) { - printk(KERN_WARNING "bttv%d: Can't enable device.\n", + printk(KERN_WARNING "bttv%d: Can't enable device.\n", btv->c.nr); return -EIO; } - if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { - printk(KERN_WARNING "bttv%d: No suitable DMA available.\n", + if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { + printk(KERN_WARNING "bttv%d: No suitable DMA available.\n", btv->c.nr); return -EIO; - } + } if (!request_mem_region(pci_resource_start(dev,0), pci_resource_len(dev,0), btv->c.name)) { - printk(KERN_WARNING "bttv%d: can't request iomem (0x%lx).\n", + printk(KERN_WARNING "bttv%d: can't request iomem (0x%lx).\n", btv->c.nr, pci_resource_start(dev,0)); return -EBUSY; } - pci_set_master(dev); + pci_set_master(dev); pci_set_command(dev); pci_set_drvdata(dev,btv); - pci_read_config_byte(dev, PCI_CLASS_REVISION, &btv->revision); - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - printk(KERN_INFO "bttv%d: Bt%d (rev %d) at %s, ", - bttv_num,btv->id, btv->revision, pci_name(dev)); - printk("irq: %d, latency: %d, mmio: 0x%lx\n", + pci_read_config_byte(dev, PCI_CLASS_REVISION, &btv->revision); + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + printk(KERN_INFO "bttv%d: Bt%d (rev %d) at %s, ", + bttv_num,btv->id, btv->revision, pci_name(dev)); + printk("irq: %d, latency: %d, mmio: 0x%lx\n", btv->c.pci->irq, lat, pci_resource_start(dev,0)); schedule(); @@ -3935,23 +3952,23 @@ static int __devinit bttv_probe(struct pci_dev *dev, goto fail1; } - /* identify card */ + /* identify card */ bttv_idcard(btv); - /* disable irqs, register irq handler */ + /* disable irqs, register irq handler */ btwrite(0, BT848_INT_MASK); - result = request_irq(btv->c.pci->irq, bttv_irq, - SA_SHIRQ | SA_INTERRUPT,btv->c.name,(void *)btv); - if (result < 0) { - printk(KERN_ERR "bttv%d: can't get IRQ %d\n", + result = request_irq(btv->c.pci->irq, bttv_irq, + SA_SHIRQ | SA_INTERRUPT,btv->c.name,(void *)btv); + if (result < 0) { + printk(KERN_ERR "bttv%d: can't get IRQ %d\n", bttv_num,btv->c.pci->irq); goto fail1; - } + } if (0 != bttv_handle_chipset(btv)) { result = -EIO; goto fail2; - } + } /* init options from insmod args */ btv->opt_combfilter = combfilter; @@ -3977,29 +3994,29 @@ static int __devinit bttv_probe(struct pci_dev *dev, btv->input = 0; /* initialize hardware */ - if (bttv_gpio) - bttv_gpio_tracking(btv,"pre-init"); + if (bttv_gpio) + bttv_gpio_tracking(btv,"pre-init"); bttv_risc_init_main(btv); init_bt848(btv); /* gpio */ - btwrite(0x00, BT848_GPIO_REG_INP); - btwrite(0x00, BT848_GPIO_OUT_EN); - if (bttv_verbose) - bttv_gpio_tracking(btv,"init"); + btwrite(0x00, BT848_GPIO_REG_INP); + btwrite(0x00, BT848_GPIO_OUT_EN); + if (bttv_verbose) + bttv_gpio_tracking(btv,"init"); - /* needs to be done before i2c is registered */ - bttv_init_card1(btv); + /* needs to be done before i2c is registered */ + bttv_init_card1(btv); - /* register i2c + gpio */ - init_bttv_i2c(btv); + /* register i2c + gpio */ + init_bttv_i2c(btv); - /* some card-specific stuff (needs working i2c) */ - bttv_init_card2(btv); + /* some card-specific stuff (needs working i2c) */ + bttv_init_card2(btv); init_irqreg(btv); - /* register video4linux + input */ + /* register video4linux + input */ if (!bttv_tvcards[btv->c.type].no_video) { bttv_register_video(btv); bt848_bright(btv,32768); @@ -4018,10 +4035,10 @@ static int __devinit bttv_probe(struct pci_dev *dev, /* everything is fine */ bttv_num++; - return 0; + return 0; fail2: - free_irq(btv->c.pci->irq,btv); + free_irq(btv->c.pci->irq,btv); fail1: if (btv->bt848_mmio) @@ -4034,12 +4051,12 @@ static int __devinit bttv_probe(struct pci_dev *dev, static void __devexit bttv_remove(struct pci_dev *pci_dev) { - struct bttv *btv = pci_get_drvdata(pci_dev); + struct bttv *btv = pci_get_drvdata(pci_dev); if (bttv_verbose) printk("bttv%d: unloading\n",btv->c.nr); - /* shutdown everything (DMA+IRQs) */ + /* shutdown everything (DMA+IRQs) */ btand(~15, BT848_GPIO_DMA_CTL); btwrite(0, BT848_INT_MASK); btwrite(~0x0, BT848_INT_STAT); @@ -4052,7 +4069,7 @@ static void __devexit bttv_remove(struct pci_dev *pci_dev) wake_up(&btv->gpioq); bttv_sub_del_devices(&btv->c); - /* unregister i2c_bus + input */ + /* unregister i2c_bus + input */ fini_bttv_i2c(btv); /* unregister video4linux */ @@ -4062,18 +4079,18 @@ static void __devexit bttv_remove(struct pci_dev *pci_dev) btcx_riscmem_free(btv->c.pci,&btv->main); /* free ressources */ - free_irq(btv->c.pci->irq,btv); + free_irq(btv->c.pci->irq,btv); iounmap(btv->bt848_mmio); - release_mem_region(pci_resource_start(btv->c.pci,0), - pci_resource_len(btv->c.pci,0)); + release_mem_region(pci_resource_start(btv->c.pci,0), + pci_resource_len(btv->c.pci,0)); pci_set_drvdata(pci_dev, NULL); - return; + return; } static int bttv_suspend(struct pci_dev *pci_dev, pm_message_t state) { - struct bttv *btv = pci_get_drvdata(pci_dev); + struct bttv *btv = pci_get_drvdata(pci_dev); struct bttv_buffer_set idle; unsigned long flags; @@ -4108,7 +4125,7 @@ static int bttv_suspend(struct pci_dev *pci_dev, pm_message_t state) static int bttv_resume(struct pci_dev *pci_dev) { - struct bttv *btv = pci_get_drvdata(pci_dev); + struct bttv *btv = pci_get_drvdata(pci_dev); unsigned long flags; int err; @@ -4153,24 +4170,24 @@ static int bttv_resume(struct pci_dev *pci_dev) } static struct pci_device_id bttv_pci_tbl[] = { - {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {0,} + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0,} }; MODULE_DEVICE_TABLE(pci, bttv_pci_tbl); static struct pci_driver bttv_pci_driver = { - .name = "bttv", - .id_table = bttv_pci_tbl, - .probe = bttv_probe, - .remove = __devexit_p(bttv_remove), + .name = "bttv", + .id_table = bttv_pci_tbl, + .probe = bttv_probe, + .remove = __devexit_p(bttv_remove), .suspend = bttv_suspend, .resume = bttv_resume, }; diff --git a/drivers/media/video/bttv-gpio.c b/drivers/media/video/bttv-gpio.c index 6b280c03e398..575ce8b8e714 100644 --- a/drivers/media/video/bttv-gpio.c +++ b/drivers/media/video/bttv-gpio.c @@ -7,7 +7,7 @@ Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) - & Marcus Metzler (mocm@thp.uni-koeln.de) + & Marcus Metzler (mocm@thp.uni-koeln.de) (c) 1999-2003 Gerd Knorr <kraxel@bytesex.org> This program is free software; you can redistribute it and/or modify diff --git a/drivers/media/video/bttv-i2c.c b/drivers/media/video/bttv-i2c.c index e684df37eb0e..77619eb131f6 100644 --- a/drivers/media/video/bttv-i2c.c +++ b/drivers/media/video/bttv-i2c.c @@ -5,7 +5,7 @@ bttv - Bt848 frame grabber driver Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) - & Marcus Metzler (mocm@thp.uni-koeln.de) + & Marcus Metzler (mocm@thp.uni-koeln.de) (c) 1999-2003 Gerd Knorr <kraxel@bytesex.org> This program is free software; you can redistribute it and/or modify @@ -237,7 +237,7 @@ bttv_i2c_readbytes(struct bttv *btv, const struct i2c_msg *msg, int last) err: if (i2c_debug) printk(" ERR: %d\n",retval); - return retval; + return retval; } static int bttv_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) @@ -290,7 +290,13 @@ static struct i2c_adapter bttv_i2c_adap_hw_template = { static int attach_inform(struct i2c_client *client) { - struct bttv *btv = i2c_get_adapdata(client->adapter); + struct bttv *btv = i2c_get_adapdata(client->adapter); + int addr=ADDR_UNSET; + + + if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) + addr = bttv_tvcards[btv->c.type].tuner_addr; + if (bttv_debug) printk(KERN_DEBUG "bttv%d: %s i2c attach [addr=0x%x,client=%s]\n", @@ -300,19 +306,20 @@ static int attach_inform(struct i2c_client *client) return 0; if (btv->tuner_type != UNSET) { - struct tuner_setup tun_setup; + struct tuner_setup tun_setup; + + if ((addr==ADDR_UNSET) || + (addr==client->addr)) { - tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV; - tun_setup.type = btv->tuner_type; - tun_setup.addr = ADDR_UNSET; + tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV | T_RADIO; + tun_setup.type = btv->tuner_type; + tun_setup.addr = addr; + bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup); + } - client->driver->command (client, TUNER_SET_TYPE_ADDR, &tun_setup); } - if (btv->pinnacle_id != UNSET) - client->driver->command(client,AUDC_CONFIG_PINNACLE, - &btv->pinnacle_id); - return 0; + return 0; } void bttv_call_i2c_clients(struct bttv *btv, unsigned int cmd, void *arg) @@ -330,43 +337,43 @@ static struct i2c_client bttv_i2c_client_template = { /* read I2C */ int bttv_I2CRead(struct bttv *btv, unsigned char addr, char *probe_for) { - unsigned char buffer = 0; + unsigned char buffer = 0; if (0 != btv->i2c_rc) return -1; if (bttv_verbose && NULL != probe_for) printk(KERN_INFO "bttv%d: i2c: checking for %s @ 0x%02x... ", btv->c.nr,probe_for,addr); - btv->i2c_client.addr = addr >> 1; - if (1 != i2c_master_recv(&btv->i2c_client, &buffer, 1)) { + btv->i2c_client.addr = addr >> 1; + if (1 != i2c_master_recv(&btv->i2c_client, &buffer, 1)) { if (NULL != probe_for) { if (bttv_verbose) printk("not found\n"); } else printk(KERN_WARNING "bttv%d: i2c read 0x%x: error\n", btv->c.nr,addr); - return -1; + return -1; } if (bttv_verbose && NULL != probe_for) printk("found\n"); - return buffer; + return buffer; } /* write I2C */ int bttv_I2CWrite(struct bttv *btv, unsigned char addr, unsigned char b1, - unsigned char b2, int both) + unsigned char b2, int both) { - unsigned char buffer[2]; - int bytes = both ? 2 : 1; + unsigned char buffer[2]; + int bytes = both ? 2 : 1; if (0 != btv->i2c_rc) return -1; - btv->i2c_client.addr = addr >> 1; - buffer[0] = b1; - buffer[1] = b2; - if (bytes != i2c_master_send(&btv->i2c_client, buffer, bytes)) + btv->i2c_client.addr = addr >> 1; + buffer[0] = b1; + buffer[1] = b2; + if (bytes != i2c_master_send(&btv->i2c_client, buffer, bytes)) return -1; - return 0; + return 0; } /* read EEPROM content */ @@ -431,8 +438,8 @@ int __devinit init_bttv_i2c(struct bttv *btv) "bt%d #%d [%s]", btv->id, btv->c.nr, btv->use_i2c_hw ? "hw" : "sw"); - i2c_set_adapdata(&btv->c.i2c_adap, btv); - btv->i2c_client.adapter = &btv->c.i2c_adap; + i2c_set_adapdata(&btv->c.i2c_adap, btv); + btv->i2c_client.adapter = &btv->c.i2c_adap; #ifdef I2C_CLASS_TV_ANALOG if (bttv_tvcards[btv->c.type].no_video) diff --git a/drivers/media/video/bttv-if.c b/drivers/media/video/bttv-if.c index e8aada772b89..19b564ab0e92 100644 --- a/drivers/media/video/bttv-if.c +++ b/drivers/media/video/bttv-if.c @@ -1,13 +1,13 @@ /* bttv-if.c -- old gpio interface to other kernel modules - don't use in new code, will go away in 2.7 + don't use in new code, will go away in 2.7 have a look at bttv-gpio.c instead. bttv - Bt848 frame grabber driver Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) - & Marcus Metzler (mocm@thp.uni-koeln.de) + & Marcus Metzler (mocm@thp.uni-koeln.de) (c) 1999-2003 Gerd Knorr <kraxel@bytesex.org> This program is free software; you can redistribute it and/or modify diff --git a/drivers/media/video/bttv-risc.c b/drivers/media/video/bttv-risc.c index a5ed99b89445..b40e9734bf08 100644 --- a/drivers/media/video/bttv-risc.c +++ b/drivers/media/video/bttv-risc.c @@ -74,27 +74,27 @@ bttv_risc_packed(struct bttv *btv, struct btcx_riscmem *risc, } if (bpl <= sg_dma_len(sg)-offset) { /* fits into current chunk */ - *(rp++)=cpu_to_le32(BT848_RISC_WRITE|BT848_RISC_SOL| + *(rp++)=cpu_to_le32(BT848_RISC_WRITE|BT848_RISC_SOL| BT848_RISC_EOL|bpl); - *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); - offset+=bpl; + *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); + offset+=bpl; } else { /* scanline needs to be splitted */ - todo = bpl; - *(rp++)=cpu_to_le32(BT848_RISC_WRITE|BT848_RISC_SOL| + todo = bpl; + *(rp++)=cpu_to_le32(BT848_RISC_WRITE|BT848_RISC_SOL| (sg_dma_len(sg)-offset)); - *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); - todo -= (sg_dma_len(sg)-offset); - offset = 0; - sg++; - while (todo > sg_dma_len(sg)) { - *(rp++)=cpu_to_le32(BT848_RISC_WRITE| + *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); + todo -= (sg_dma_len(sg)-offset); + offset = 0; + sg++; + while (todo > sg_dma_len(sg)) { + *(rp++)=cpu_to_le32(BT848_RISC_WRITE| sg_dma_len(sg)); - *(rp++)=cpu_to_le32(sg_dma_address(sg)); + *(rp++)=cpu_to_le32(sg_dma_address(sg)); todo -= sg_dma_len(sg); sg++; } - *(rp++)=cpu_to_le32(BT848_RISC_WRITE|BT848_RISC_EOL| + *(rp++)=cpu_to_le32(BT848_RISC_WRITE|BT848_RISC_EOL| todo); *(rp++)=cpu_to_le32(sg_dma_address(sg)); offset += todo; @@ -201,8 +201,8 @@ bttv_risc_planar(struct bttv *btv, struct btcx_riscmem *risc, ri |= BT848_RISC_EOL; /* write risc instruction */ - *(rp++)=cpu_to_le32(ri | ylen); - *(rp++)=cpu_to_le32(((ylen >> hshift) << 16) | + *(rp++)=cpu_to_le32(ri | ylen); + *(rp++)=cpu_to_le32(((ylen >> hshift) << 16) | (ylen >> hshift)); *(rp++)=cpu_to_le32(sg_dma_address(ysg)+yoffset); yoffset += ylen; @@ -319,7 +319,7 @@ bttv_calc_geo(struct bttv *btv, struct bttv_geometry *geo, int width, int height, int interleaved, int norm) { const struct bttv_tvnorm *tvnorm = &bttv_tvnorms[norm]; - u32 xsf, sr; + u32 xsf, sr; int vdelay; int swidth = tvnorm->swidth; @@ -334,52 +334,52 @@ bttv_calc_geo(struct bttv *btv, struct bttv_geometry *geo, vdelay = tvnorm->vdelay; - xsf = (width*scaledtwidth)/swidth; - geo->hscale = ((totalwidth*4096UL)/xsf-4096); - geo->hdelay = tvnorm->hdelayx1; - geo->hdelay = (geo->hdelay*width)/swidth; - geo->hdelay &= 0x3fe; - sr = ((tvnorm->sheight >> (interleaved?0:1))*512)/height - 512; - geo->vscale = (0x10000UL-sr) & 0x1fff; - geo->crop = ((width>>8)&0x03) | ((geo->hdelay>>6)&0x0c) | - ((tvnorm->sheight>>4)&0x30) | ((vdelay>>2)&0xc0); - geo->vscale |= interleaved ? (BT848_VSCALE_INT<<8) : 0; - geo->vdelay = vdelay; - geo->width = width; - geo->sheight = tvnorm->sheight; + xsf = (width*scaledtwidth)/swidth; + geo->hscale = ((totalwidth*4096UL)/xsf-4096); + geo->hdelay = tvnorm->hdelayx1; + geo->hdelay = (geo->hdelay*width)/swidth; + geo->hdelay &= 0x3fe; + sr = ((tvnorm->sheight >> (interleaved?0:1))*512)/height - 512; + geo->vscale = (0x10000UL-sr) & 0x1fff; + geo->crop = ((width>>8)&0x03) | ((geo->hdelay>>6)&0x0c) | + ((tvnorm->sheight>>4)&0x30) | ((vdelay>>2)&0xc0); + geo->vscale |= interleaved ? (BT848_VSCALE_INT<<8) : 0; + geo->vdelay = vdelay; + geo->width = width; + geo->sheight = tvnorm->sheight; geo->vtotal = tvnorm->vtotal; - if (btv->opt_combfilter) { - geo->vtc = (width < 193) ? 2 : ((width < 385) ? 1 : 0); - geo->comb = (width < 769) ? 1 : 0; - } else { - geo->vtc = 0; - geo->comb = 0; - } + if (btv->opt_combfilter) { + geo->vtc = (width < 193) ? 2 : ((width < 385) ? 1 : 0); + geo->comb = (width < 769) ? 1 : 0; + } else { + geo->vtc = 0; + geo->comb = 0; + } } static void bttv_apply_geo(struct bttv *btv, struct bttv_geometry *geo, int odd) { - int off = odd ? 0x80 : 0x00; + int off = odd ? 0x80 : 0x00; if (geo->comb) btor(BT848_VSCALE_COMB, BT848_E_VSCALE_HI+off); else btand(~BT848_VSCALE_COMB, BT848_E_VSCALE_HI+off); - btwrite(geo->vtc, BT848_E_VTC+off); - btwrite(geo->hscale >> 8, BT848_E_HSCALE_HI+off); - btwrite(geo->hscale & 0xff, BT848_E_HSCALE_LO+off); - btaor((geo->vscale>>8), 0xe0, BT848_E_VSCALE_HI+off); - btwrite(geo->vscale & 0xff, BT848_E_VSCALE_LO+off); - btwrite(geo->width & 0xff, BT848_E_HACTIVE_LO+off); - btwrite(geo->hdelay & 0xff, BT848_E_HDELAY_LO+off); - btwrite(geo->sheight & 0xff, BT848_E_VACTIVE_LO+off); - btwrite(geo->vdelay & 0xff, BT848_E_VDELAY_LO+off); - btwrite(geo->crop, BT848_E_CROP+off); + btwrite(geo->vtc, BT848_E_VTC+off); + btwrite(geo->hscale >> 8, BT848_E_HSCALE_HI+off); + btwrite(geo->hscale & 0xff, BT848_E_HSCALE_LO+off); + btaor((geo->vscale>>8), 0xe0, BT848_E_VSCALE_HI+off); + btwrite(geo->vscale & 0xff, BT848_E_VSCALE_LO+off); + btwrite(geo->width & 0xff, BT848_E_HACTIVE_LO+off); + btwrite(geo->hdelay & 0xff, BT848_E_HDELAY_LO+off); + btwrite(geo->sheight & 0xff, BT848_E_VACTIVE_LO+off); + btwrite(geo->vdelay & 0xff, BT848_E_VDELAY_LO+off); + btwrite(geo->crop, BT848_E_CROP+off); btwrite(geo->vtotal>>8, BT848_VTOTAL_HI); - btwrite(geo->vtotal & 0xff, BT848_VTOTAL_LO); + btwrite(geo->vtotal & 0xff, BT848_VTOTAL_LO); } /* ---------------------------------------------------------- */ @@ -420,7 +420,7 @@ bttv_set_dma(struct bttv *btv, int override) } else { del_timer(&btv->timeout); } - btv->main.cpu[RISC_SLOT_LOOP] = cpu_to_le32(cmd); + btv->main.cpu[RISC_SLOT_LOOP] = cpu_to_le32(cmd); btaor(capctl, ~0x0f, BT848_CAP_CTL); if (capctl) { @@ -432,7 +432,7 @@ bttv_set_dma(struct bttv *btv, int override) } else { if (!btv->dma_on) return; - btand(~3, BT848_GPIO_DMA_CTL); + btand(~3, BT848_GPIO_DMA_CTL); btv->dma_on = 0; } return; @@ -460,19 +460,19 @@ bttv_risc_init_main(struct bttv *btv) btv->main.cpu[6] = cpu_to_le32(BT848_RISC_JUMP); btv->main.cpu[7] = cpu_to_le32(btv->main.dma + (8<<2)); - btv->main.cpu[8] = cpu_to_le32(BT848_RISC_SYNC | BT848_RISC_RESYNC | + btv->main.cpu[8] = cpu_to_le32(BT848_RISC_SYNC | BT848_RISC_RESYNC | BT848_FIFO_STATUS_VRO); - btv->main.cpu[9] = cpu_to_le32(0); + btv->main.cpu[9] = cpu_to_le32(0); /* bottom field */ - btv->main.cpu[10] = cpu_to_le32(BT848_RISC_JUMP); + btv->main.cpu[10] = cpu_to_le32(BT848_RISC_JUMP); btv->main.cpu[11] = cpu_to_le32(btv->main.dma + (12<<2)); - btv->main.cpu[12] = cpu_to_le32(BT848_RISC_JUMP); + btv->main.cpu[12] = cpu_to_le32(BT848_RISC_JUMP); btv->main.cpu[13] = cpu_to_le32(btv->main.dma + (14<<2)); /* jump back to top field */ btv->main.cpu[14] = cpu_to_le32(BT848_RISC_JUMP); - btv->main.cpu[15] = cpu_to_le32(btv->main.dma + (0<<2)); + btv->main.cpu[15] = cpu_to_le32(btv->main.dma + (0<<2)); return 0; } diff --git a/drivers/media/video/bttv.h b/drivers/media/video/bttv.h index d254e90e3bb9..124ea41dada4 100644 --- a/drivers/media/video/bttv.h +++ b/drivers/media/video/bttv.h @@ -20,123 +20,148 @@ /* ---------------------------------------------------------- */ /* exported by bttv-cards.c */ -#define BTTV_UNKNOWN 0x00 -#define BTTV_MIRO 0x01 -#define BTTV_HAUPPAUGE 0x02 -#define BTTV_STB 0x03 -#define BTTV_INTEL 0x04 -#define BTTV_DIAMOND 0x05 -#define BTTV_AVERMEDIA 0x06 -#define BTTV_MATRIX_VISION 0x07 -#define BTTV_FLYVIDEO 0x08 -#define BTTV_TURBOTV 0x09 -#define BTTV_HAUPPAUGE878 0x0a -#define BTTV_MIROPRO 0x0b -#define BTTV_ADSTECH_TV 0x0c -#define BTTV_AVERMEDIA98 0x0d -#define BTTV_VHX 0x0e -#define BTTV_ZOLTRIX 0x0f -#define BTTV_PIXVIEWPLAYTV 0x10 -#define BTTV_WINVIEW_601 0x11 -#define BTTV_AVEC_INTERCAP 0x12 -#define BTTV_LIFE_FLYKIT 0x13 -#define BTTV_CEI_RAFFLES 0x14 -#define BTTV_CONFERENCETV 0x15 -#define BTTV_PHOEBE_TVMAS 0x16 -#define BTTV_MODTEC_205 0x17 -#define BTTV_MAGICTVIEW061 0x18 -#define BTTV_VOBIS_BOOSTAR 0x19 -#define BTTV_HAUPPAUG_WCAM 0x1a -#define BTTV_MAXI 0x1b -#define BTTV_TERRATV 0x1c -#define BTTV_PXC200 0x1d -#define BTTV_FLYVIDEO_98 0x1e -#define BTTV_IPROTV 0x1f -#define BTTV_INTEL_C_S_PCI 0x20 -#define BTTV_TERRATVALUE 0x21 -#define BTTV_WINFAST2000 0x22 -#define BTTV_CHRONOS_VS2 0x23 -#define BTTV_TYPHOON_TVIEW 0x24 -#define BTTV_PXELVWPLTVPRO 0x25 -#define BTTV_MAGICTVIEW063 0x26 -#define BTTV_PINNACLE 0x27 -#define BTTV_STB2 0x28 -#define BTTV_AVPHONE98 0x29 -#define BTTV_PV951 0x2a -#define BTTV_ONAIR_TV 0x2b -#define BTTV_SIGMA_TVII_FM 0x2c -#define BTTV_MATRIX_VISION2 0x2d -#define BTTV_ZOLTRIX_GENIE 0x2e -#define BTTV_TERRATVRADIO 0x2f -#define BTTV_DYNALINK 0x30 -#define BTTV_GVBCTV3PCI 0x31 -#define BTTV_PXELVWPLTVPAK 0x32 -#define BTTV_EAGLE 0x33 -#define BTTV_PINNACLEPRO 0x34 -#define BTTV_TVIEW_RDS_FM 0x35 -#define BTTV_LIFETEC_9415 0x36 -#define BTTV_BESTBUY_EASYTV 0x37 -#define BTTV_FLYVIDEO_98FM 0x38 -#define BTTV_GMV1 0x3d -#define BTTV_BESTBUY_EASYTV2 0x3e -#define BTTV_ATI_TVWONDER 0x3f -#define BTTV_ATI_TVWONDERVE 0x40 -#define BTTV_FLYVIDEO2000 0x41 -#define BTTV_TERRATVALUER 0x42 -#define BTTV_GVBCTV4PCI 0x43 -#define BTTV_VOODOOTV_FM 0x44 -#define BTTV_AIMMS 0x45 -#define BTTV_PV_BT878P_PLUS 0x46 -#define BTTV_FLYVIDEO98EZ 0x47 -#define BTTV_PV_BT878P_9B 0x48 -#define BTTV_SENSORAY311 0x49 -#define BTTV_RV605 0x4a -#define BTTV_WINDVR 0x4c -#define BTTV_GRANDTEC 0x4d -#define BTTV_KWORLD 0x4e -#define BTTV_HAUPPAUGEPVR 0x50 -#define BTTV_GVBCTV5PCI 0x51 -#define BTTV_OSPREY1x0 0x52 -#define BTTV_OSPREY1x0_848 0x53 -#define BTTV_OSPREY101_848 0x54 -#define BTTV_OSPREY1x1 0x55 -#define BTTV_OSPREY1x1_SVID 0x56 -#define BTTV_OSPREY2xx 0x57 -#define BTTV_OSPREY2x0_SVID 0x58 -#define BTTV_OSPREY2x0 0x59 -#define BTTV_OSPREY500 0x5a -#define BTTV_OSPREY540 0x5b -#define BTTV_OSPREY2000 0x5c -#define BTTV_IDS_EAGLE 0x5d -#define BTTV_PINNACLESAT 0x5e -#define BTTV_FORMAC_PROTV 0x5f -#define BTTV_EURESYS_PICOLO 0x61 -#define BTTV_PV150 0x62 -#define BTTV_AD_TVK503 0x63 -#define BTTV_IVC200 0x66 -#define BTTV_XGUARD 0x67 -#define BTTV_NEBULA_DIGITV 0x68 -#define BTTV_PV143 0x69 -#define BTTV_IVC100 0x6e -#define BTTV_IVC120 0x6f -#define BTTV_PC_HDTV 0x70 -#define BTTV_TWINHAN_DST 0x71 -#define BTTV_WINFASTVC100 0x72 -#define BTTV_SIMUS_GVC1100 0x74 -#define BTTV_NGSTV_PLUS 0x75 -#define BTTV_LMLBT4 0x76 -#define BTTV_PICOLO_TETRA_CHIP 0x79 -#define BTTV_AVDVBT_771 0x7b -#define BTTV_AVDVBT_761 0x7c -#define BTTV_MATRIX_VISIONSQ 0x7d -#define BTTV_MATRIX_VISIONSLC 0x7e -#define BTTV_APAC_VIEWCOMP 0x7f -#define BTTV_DVICO_DVBT_LITE 0x80 -#define BTTV_TIBET_CS16 0x83 -#define BTTV_KODICOM_4400R 0x84 -#define BTTV_ADLINK_RTV24 0x86 -#define BTTV_DVICO_FUSIONHDTV_5_LITE 0x87 -#define BTTV_ACORP_Y878F 0x88 +#define BTTV_BOARD_UNKNOWN 0x00 +#define BTTV_BOARD_MIRO 0x01 +#define BTTV_BOARD_HAUPPAUGE 0x02 +#define BTTV_BOARD_STB 0x03 +#define BTTV_BOARD_INTEL 0x04 +#define BTTV_BOARD_DIAMOND 0x05 +#define BTTV_BOARD_AVERMEDIA 0x06 +#define BTTV_BOARD_MATRIX_VISION 0x07 +#define BTTV_BOARD_FLYVIDEO 0x08 +#define BTTV_BOARD_TURBOTV 0x09 +#define BTTV_BOARD_HAUPPAUGE878 0x0a +#define BTTV_BOARD_MIROPRO 0x0b +#define BTTV_BOARD_ADSTECH_TV 0x0c +#define BTTV_BOARD_AVERMEDIA98 0x0d +#define BTTV_BOARD_VHX 0x0e +#define BTTV_BOARD_ZOLTRIX 0x0f +#define BTTV_BOARD_PIXVIEWPLAYTV 0x10 +#define BTTV_BOARD_WINVIEW_601 0x11 +#define BTTV_BOARD_AVEC_INTERCAP 0x12 +#define BTTV_BOARD_LIFE_FLYKIT 0x13 +#define BTTV_BOARD_CEI_RAFFLES 0x14 +#define BTTV_BOARD_CONFERENCETV 0x15 +#define BTTV_BOARD_PHOEBE_TVMAS 0x16 +#define BTTV_BOARD_MODTEC_205 0x17 +#define BTTV_BOARD_MAGICTVIEW061 0x18 +#define BTTV_BOARD_VOBIS_BOOSTAR 0x19 +#define BTTV_BOARD_HAUPPAUG_WCAM 0x1a +#define BTTV_BOARD_MAXI 0x1b +#define BTTV_BOARD_TERRATV 0x1c +#define BTTV_BOARD_PXC200 0x1d +#define BTTV_BOARD_FLYVIDEO_98 0x1e +#define BTTV_BOARD_IPROTV 0x1f +#define BTTV_BOARD_INTEL_C_S_PCI 0x20 +#define BTTV_BOARD_TERRATVALUE 0x21 +#define BTTV_BOARD_WINFAST2000 0x22 +#define BTTV_BOARD_CHRONOS_VS2 0x23 +#define BTTV_BOARD_TYPHOON_TVIEW 0x24 +#define BTTV_BOARD_PXELVWPLTVPRO 0x25 +#define BTTV_BOARD_MAGICTVIEW063 0x26 +#define BTTV_BOARD_PINNACLE 0x27 +#define BTTV_BOARD_STB2 0x28 +#define BTTV_BOARD_AVPHONE98 0x29 +#define BTTV_BOARD_PV951 0x2a +#define BTTV_BOARD_ONAIR_TV 0x2b +#define BTTV_BOARD_SIGMA_TVII_FM 0x2c +#define BTTV_BOARD_MATRIX_VISION2 0x2d +#define BTTV_BOARD_ZOLTRIX_GENIE 0x2e +#define BTTV_BOARD_TERRATVRADIO 0x2f +#define BTTV_BOARD_DYNALINK 0x30 +#define BTTV_BOARD_GVBCTV3PCI 0x31 +#define BTTV_BOARD_PXELVWPLTVPAK 0x32 +#define BTTV_BOARD_EAGLE 0x33 +#define BTTV_BOARD_PINNACLEPRO 0x34 +#define BTTV_BOARD_TVIEW_RDS_FM 0x35 +#define BTTV_BOARD_LIFETEC_9415 0x36 +#define BTTV_BOARD_BESTBUY_EASYTV 0x37 +#define BTTV_BOARD_FLYVIDEO_98FM 0x38 +#define BTTV_BOARD_GRANDTEC 0x39 +#define BTTV_BOARD_ASKEY_CPH060 0x3a +#define BTTV_BOARD_ASKEY_CPH03X 0x3b +#define BTTV_BOARD_MM100PCTV 0x3c +#define BTTV_BOARD_GMV1 0x3d +#define BTTV_BOARD_BESTBUY_EASYTV2 0x3e +#define BTTV_BOARD_ATI_TVWONDER 0x3f +#define BTTV_BOARD_ATI_TVWONDERVE 0x40 +#define BTTV_BOARD_FLYVIDEO2000 0x41 +#define BTTV_BOARD_TERRATVALUER 0x42 +#define BTTV_BOARD_GVBCTV4PCI 0x43 +#define BTTV_BOARD_VOODOOTV_FM 0x44 +#define BTTV_BOARD_AIMMS 0x45 +#define BTTV_BOARD_PV_BT878P_PLUS 0x46 +#define BTTV_BOARD_FLYVIDEO98EZ 0x47 +#define BTTV_BOARD_PV_BT878P_9B 0x48 +#define BTTV_BOARD_SENSORAY311 0x49 +#define BTTV_BOARD_RV605 0x4a +#define BTTV_BOARD_POWERCLR_MTV878 0x4b +#define BTTV_BOARD_WINDVR 0x4c +#define BTTV_BOARD_GRANDTEC_MULTI 0x4d +#define BTTV_BOARD_KWORLD 0x4e +#define BTTV_BOARD_DSP_TCVIDEO 0x4f +#define BTTV_BOARD_HAUPPAUGEPVR 0x50 +#define BTTV_BOARD_GVBCTV5PCI 0x51 +#define BTTV_BOARD_OSPREY1x0 0x52 +#define BTTV_BOARD_OSPREY1x0_848 0x53 +#define BTTV_BOARD_OSPREY101_848 0x54 +#define BTTV_BOARD_OSPREY1x1 0x55 +#define BTTV_BOARD_OSPREY1x1_SVID 0x56 +#define BTTV_BOARD_OSPREY2xx 0x57 +#define BTTV_BOARD_OSPREY2x0_SVID 0x58 +#define BTTV_BOARD_OSPREY2x0 0x59 +#define BTTV_BOARD_OSPREY500 0x5a +#define BTTV_BOARD_OSPREY540 0x5b +#define BTTV_BOARD_OSPREY2000 0x5c +#define BTTV_BOARD_IDS_EAGLE 0x5d +#define BTTV_BOARD_PINNACLESAT 0x5e +#define BTTV_BOARD_FORMAC_PROTV 0x5f +#define BTTV_BOARD_MACHTV 0x60 +#define BTTV_BOARD_EURESYS_PICOLO 0x61 +#define BTTV_BOARD_PV150 0x62 +#define BTTV_BOARD_AD_TVK503 0x63 +#define BTTV_BOARD_HERCULES_SM_TV 0x64 +#define BTTV_BOARD_PACETV 0x65 +#define BTTV_BOARD_IVC200 0x66 +#define BTTV_BOARD_XGUARD 0x67 +#define BTTV_BOARD_NEBULA_DIGITV 0x68 +#define BTTV_BOARD_PV143 0x69 +#define BTTV_BOARD_VD009X1_MINIDIN 0x6a +#define BTTV_BOARD_VD009X1_COMBI 0x6b +#define BTTV_BOARD_VD009_MINIDIN 0x6c +#define BTTV_BOARD_VD009_COMBI 0x6d +#define BTTV_BOARD_IVC100 0x6e +#define BTTV_BOARD_IVC120 0x6f +#define BTTV_BOARD_PC_HDTV 0x70 +#define BTTV_BOARD_TWINHAN_DST 0x71 +#define BTTV_BOARD_WINFASTVC100 0x72 +#define BTTV_BOARD_TEV560 0x73 +#define BTTV_BOARD_SIMUS_GVC1100 0x74 +#define BTTV_BOARD_NGSTV_PLUS 0x75 +#define BTTV_BOARD_LMLBT4 0x76 +#define BTTV_BOARD_TEKRAM_M205 0x77 +#define BTTV_BOARD_CONTVFMI 0x78 +#define BTTV_BOARD_PICOLO_TETRA_CHIP 0x79 +#define BTTV_BOARD_SPIRIT_TV 0x7a +#define BTTV_BOARD_AVDVBT_771 0x7b +#define BTTV_BOARD_AVDVBT_761 0x7c +#define BTTV_BOARD_MATRIX_VISIONSQ 0x7d +#define BTTV_BOARD_MATRIX_VISIONSLC 0x7e +#define BTTV_BOARD_APAC_VIEWCOMP 0x7f +#define BTTV_BOARD_DVICO_DVBT_LITE 0x80 +#define BTTV_BOARD_VGEAR_MYVCD 0x81 +#define BTTV_BOARD_SUPER_TV 0x82 +#define BTTV_BOARD_TIBET_CS16 0x83 +#define BTTV_BOARD_KODICOM_4400R 0x84 +#define BTTV_BOARD_KODICOM_4400R_SL 0x85 +#define BTTV_BOARD_ADLINK_RTV24 0x86 +#define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87 +#define BTTV_BOARD_ACORP_Y878F 0x88 +#define BTTV_BOARD_CONCEPTRONIC_CTVFMI2 0x89 +#define BTTV_BOARD_PV_BT878P_2E 0x8a +#define BTTV_BOARD_PV_M4900 0x8b +#define BTTV_BOARD_OSPREY440 0x8c +#define BTTV_BOARD_ASOUND_SKYEYE 0x8d /* i2c address list */ #define I2C_TSA5522 0xc2 @@ -177,7 +202,7 @@ struct bttv_core { struct list_head subs; /* struct bttv_sub_device */ /* device config */ - unsigned int nr; /* dev nr (for printk("bttv%d: ..."); */ + unsigned int nr; /* dev nr (for printk("bttv%d: ..."); */ unsigned int type; /* card type (pointer into tvcards[]) */ char name[8]; /* dev name */ }; @@ -186,16 +211,16 @@ struct bttv; struct tvcard { - char *name; - unsigned int video_inputs; - unsigned int audio_inputs; - unsigned int tuner; - unsigned int svhs; + char *name; + unsigned int video_inputs; + unsigned int audio_inputs; + unsigned int tuner; + unsigned int svhs; unsigned int digital_mode; // DIGITAL_MODE_CAMERA or DIGITAL_MODE_VIDEO - u32 gpiomask; - u32 muxsel[16]; - u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */ - u32 gpiomask2; /* GPIO MUX mask */ + u32 gpiomask; + u32 muxsel[16]; + u32 audiomux[6]; /* Tuner, Radio, external, internal, mute, stereo */ + u32 gpiomask2; /* GPIO MUX mask */ /* i2c audio flags */ unsigned int no_msp34xx:1; @@ -218,6 +243,7 @@ struct tvcard unsigned int tuner_type; unsigned int tuner_addr; + unsigned int radio_addr; unsigned int has_radio; void (*audio_hook)(struct bttv *btv, struct video_audio *v, int set); @@ -246,7 +272,7 @@ extern int bttv_handle_chipset(struct bttv *btv); interface below for new code */ /* returns card type + card ID (for bt878-based ones) - for possible values see lines below beginning with #define BTTV_UNKNOWN + for possible values see lines below beginning with #define BTTV_BOARD_UNKNOWN returns negative value if error occurred */ extern int bttv_get_cardinfo(unsigned int card, int *type, diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bttvp.h index e0e7c7a84bc5..386f546f7d11 100644 --- a/drivers/media/video/bttvp.h +++ b/drivers/media/video/bttvp.h @@ -77,14 +77,14 @@ struct bttv_tvnorm { int v4l2_id; char *name; - u32 Fsc; - u16 swidth, sheight; /* scaled standard width, height */ + u32 Fsc; + u16 swidth, sheight; /* scaled standard width, height */ u16 totalwidth; u8 adelay, bdelay, iform; u32 scaledtwidth; u16 hdelayx1, hactivex1; u16 vdelay; - u8 vbipack; + u8 vbipack; u16 vtotal; int sram; }; @@ -267,8 +267,8 @@ struct bttv { /* card configuration info */ unsigned int cardid; /* pci subsystem id (bt878 based ones) */ - unsigned int tuner_type; /* tuner chip type */ - unsigned int pinnacle_id; + unsigned int tuner_type; /* tuner chip type */ + unsigned int pinnacle_id; unsigned int svhs; struct bttv_pll_info pll; int triton1; @@ -301,9 +301,9 @@ struct bttv { /* locking */ spinlock_t s_lock; - struct semaphore lock; + struct semaphore lock; int resources; - struct semaphore reslock; + struct semaphore reslock; #ifdef VIDIOC_G_PRIORITY struct v4l2_prio_state prio; #endif diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c new file mode 100644 index 000000000000..780b352ec119 --- /dev/null +++ b/drivers/media/video/cs53l32a.c @@ -0,0 +1,240 @@ +/* + * cs53l32a (Adaptec AVC-2010 and AVC-2410) i2c ivtv driver. + * Copyright (C) 2005 Martin Vaughan + * + * Audio source switching for Adaptec AVC-2410 added by Trev Jackson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/i2c-id.h> +#include <linux/videodev.h> +#include <media/audiochip.h> + +MODULE_DESCRIPTION("i2c device driver for cs53l32a Audio ADC"); +MODULE_AUTHOR("Martin Vaughan"); +MODULE_LICENSE("GPL"); + +static int debug = 0; + +module_param(debug, bool, 0644); + +MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On"); + +#define cs53l32a_dbg(fmt, arg...) \ + do { \ + if (debug) \ + printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); \ + } while (0) + +#define cs53l32a_err(fmt, arg...) do { \ + printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0) +#define cs53l32a_info(fmt, arg...) do { \ + printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0) + +static unsigned short normal_i2c[] = { 0x22 >> 1, I2C_CLIENT_END }; + + +I2C_CLIENT_INSMOD; + +/* ----------------------------------------------------------------------- */ + +static int cs53l32a_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int cs53l32a_read(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int cs53l32a_command(struct i2c_client *client, unsigned int cmd, + void *arg) +{ + int *input = arg; + + switch (cmd) { + case AUDC_SET_INPUT: + switch (*input) { + case AUDIO_TUNER: + cs53l32a_write(client, 0x01, 0x01); + break; + case AUDIO_EXTERN: + cs53l32a_write(client, 0x01, 0x21); + break; + case AUDIO_MUTE: + cs53l32a_write(client, 0x03, 0xF0); + break; + case AUDIO_UNMUTE: + cs53l32a_write(client, 0x03, 0x30); + break; + default: + cs53l32a_err("Invalid input %d.\n", *input); + return -EINVAL; + } + break; + + case VIDIOC_S_CTRL: + { + struct v4l2_control *ctrl = arg; + + if (ctrl->id != V4L2_CID_AUDIO_VOLUME) + return -EINVAL; + if (ctrl->value > 12 || ctrl->value < -90) + return -EINVAL; + cs53l32a_write(client, 0x04, (u8) ctrl->value); + cs53l32a_write(client, 0x05, (u8) ctrl->value); + break; + } + + case VIDIOC_LOG_STATUS: + { + u8 v = cs53l32a_read(client, 0x01); + u8 m = cs53l32a_read(client, 0x03); + + cs53l32a_info("Input: %s%s\n", + v == 0x21 ? "external line in" : "tuner", + (m & 0xC0) ? " (muted)" : ""); + break; + } + + default: + return -EINVAL; + } + return 0; +} + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ + +/* + * Generic i2c probe + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' + */ + +static struct i2c_driver i2c_driver; + +static int cs53l32a_attach(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *client; + int i; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return 0; + + client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (client == 0) + return -ENOMEM; + + memset(client, 0, sizeof(struct i2c_client)); + client->addr = address; + client->adapter = adapter; + client->driver = &i2c_driver; + client->flags = I2C_CLIENT_ALLOW_USE; + snprintf(client->name, sizeof(client->name) - 1, "cs53l32a"); + + cs53l32a_info("chip found @ 0x%x (%s)\n", address << 1, adapter->name); + + for (i = 1; i <= 7; i++) { + u8 v = cs53l32a_read(client, i); + + cs53l32a_dbg("Read Reg %d %02x\n", i, v); + } + + /* Set cs53l32a internal register for Adaptec 2010/2410 setup */ + + cs53l32a_write(client, 0x01, (u8) 0x21); + cs53l32a_write(client, 0x02, (u8) 0x29); + cs53l32a_write(client, 0x03, (u8) 0x30); + cs53l32a_write(client, 0x04, (u8) 0x00); + cs53l32a_write(client, 0x05, (u8) 0x00); + cs53l32a_write(client, 0x06, (u8) 0x00); + cs53l32a_write(client, 0x07, (u8) 0x00); + + /* Display results, should be 0x21,0x29,0x30,0x00,0x00,0x00,0x00 */ + + for (i = 1; i <= 7; i++) { + u8 v = cs53l32a_read(client, i); + + cs53l32a_dbg("Read Reg %d %02x\n", i, v); + } + + i2c_attach_client(client); + + return 0; +} + +static int cs53l32a_probe(struct i2c_adapter *adapter) +{ +#ifdef I2C_CLASS_TV_ANALOG + if (adapter->class & I2C_CLASS_TV_ANALOG) +#else + if (adapter->id == I2C_HW_B_BT848) +#endif + return i2c_probe(adapter, &addr_data, cs53l32a_attach); + return 0; +} + +static int cs53l32a_detach(struct i2c_client *client) +{ + int err; + + err = i2c_detach_client(client); + if (err) { + return err; + } + kfree(client); + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ +static struct i2c_driver i2c_driver = { + .name = "cs53l32a", + .id = I2C_DRIVERID_CS53L32A, + .flags = I2C_DF_NOTIFY, + .attach_adapter = cs53l32a_probe, + .detach_client = cs53l32a_detach, + .command = cs53l32a_command, + .owner = THIS_MODULE, +}; + + +static int __init cs53l32a_init_module(void) +{ + return i2c_add_driver(&i2c_driver); +} + +static void __exit cs53l32a_cleanup_module(void) +{ + i2c_del_driver(&i2c_driver); +} + +module_init(cs53l32a_init_module); +module_exit(cs53l32a_cleanup_module); diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig new file mode 100644 index 000000000000..41818b6205b3 --- /dev/null +++ b/drivers/media/video/cx88/Kconfig @@ -0,0 +1,91 @@ +config VIDEO_CX88 + tristate "Conexant 2388x (bt878 successor) support" + depends on VIDEO_DEV && PCI && I2C + select I2C_ALGOBIT + select FW_LOADER + select VIDEO_BTCX + select VIDEO_BUF + select VIDEO_TUNER + select VIDEO_TVEEPROM + select VIDEO_IR + ---help--- + This is a video4linux driver for Conexant 2388x based + TV cards. + + To compile this driver as a module, choose M here: the + module will be called cx8800 + +config VIDEO_CX88_DVB + tristate "DVB/ATSC Support for cx2388x based TV cards" + depends on VIDEO_CX88 && DVB_CORE + select VIDEO_BUF_DVB + ---help--- + This adds support for DVB/ATSC cards based on the + Connexant 2388x chip. + + To compile this driver as a module, choose M here: the + module will be called cx88-dvb. + + You must also select one or more DVB/ATSC demodulators. + If you are unsure which you need, choose all of them. + +config VIDEO_CX88_DVB_ALL_FRONTENDS + bool "Build all supported frontends for cx2388x based TV cards" + default y + depends on VIDEO_CX88_DVB + select DVB_MT352 + select DVB_OR51132 + select DVB_CX22702 + select DVB_LGDT330X + select DVB_NXT200X + ---help--- + This builds cx88-dvb with all currently supported frontend + demodulators. If you wish to tweak your configuration, and + only include support for the hardware that you need, choose N here. + + If you are unsure, choose Y. + +config VIDEO_CX88_DVB_MT352 + tristate "Zarlink MT352 DVB-T Support" + default m + depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS + select DVB_MT352 + ---help--- + This adds DVB-T support for cards based on the + Connexant 2388x chip and the MT352 demodulator. + +config VIDEO_CX88_DVB_OR51132 + tristate "OR51132 ATSC Support" + default m + depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS + select DVB_OR51132 + ---help--- + This adds ATSC 8VSB and QAM64/256 support for cards based on the + Connexant 2388x chip and the OR51132 demodulator. + +config VIDEO_CX88_DVB_CX22702 + tristate "Conexant CX22702 DVB-T Support" + default m + depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS + select DVB_CX22702 + ---help--- + This adds DVB-T support for cards based on the + Connexant 2388x chip and the CX22702 demodulator. + +config VIDEO_CX88_DVB_LGDT330X + tristate "LG Electronics DT3302/DT3303 ATSC Support" + default m + depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS + select DVB_LGDT330X + ---help--- + This adds ATSC 8VSB and QAM64/256 support for cards based on the + Connexant 2388x chip and the LGDT3302/LGDT3303 demodulator. + +config VIDEO_CX88_DVB_NXT200X + tristate "NXT2002/NXT2004 ATSC Support" + default m + depends on VIDEO_CX88_DVB && !VIDEO_CX88_DVB_ALL_FRONTENDS + select DVB_NXT200X + ---help--- + This adds ATSC 8VSB and QAM64/256 support for cards based on the + Connexant 2388x chip and the NXT2002/NXT2004 demodulator. diff --git a/drivers/media/video/cx88/Makefile b/drivers/media/video/cx88/Makefile index 107e48645e3a..0df40b773454 100644 --- a/drivers/media/video/cx88/Makefile +++ b/drivers/media/video/cx88/Makefile @@ -9,6 +9,9 @@ obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb.o EXTRA_CFLAGS += -I$(src)/.. EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/frontends +ifneq ($(CONFIG_VIDEO_BUF_DVB),n) + EXTRA_CFLAGS += -DHAVE_VIDEO_BUF_DVB=1 +endif ifneq ($(CONFIG_DVB_CX22702),n) EXTRA_CFLAGS += -DHAVE_CX22702=1 endif @@ -21,3 +24,6 @@ endif ifneq ($(CONFIG_DVB_MT352),n) EXTRA_CFLAGS += -DHAVE_MT352=1 endif +ifneq ($(CONFIG_DVB_NXT200X),n) + EXTRA_CFLAGS += -DHAVE_NXT200X=1 +endif diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 0c0c59e94774..4ae3f78cccf2 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -38,7 +38,7 @@ MODULE_AUTHOR("Jelle Foks <jelle@foks.8m.com>"); MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); MODULE_LICENSE("GPL"); -static unsigned int mpegbufs = 8; +static unsigned int mpegbufs = 32; module_param(mpegbufs,int,0644); MODULE_PARM_DESC(mpegbufs,"number of mpeg buffers, range 2-32"); @@ -436,7 +436,7 @@ static int memory_write(struct cx88_core *core, u32 address, u32 value) static int memory_read(struct cx88_core *core, u32 address, u32 *value) { - int retval; + int retval; u32 val; /* Warning: address is dword address (4 bytes) */ @@ -605,11 +605,11 @@ static int blackbird_load_firmware(struct cx8802_dev *dev) u32 *dataptr; retval = register_write(dev->core, IVTV_REG_VPU, 0xFFFFFFED); - retval |= register_write(dev->core, IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST); - retval |= register_write(dev->core, IVTV_REG_ENC_SDRAM_REFRESH, 0x80000640); - retval |= register_write(dev->core, IVTV_REG_ENC_SDRAM_PRECHARGE, 0x1A); + retval |= register_write(dev->core, IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST); + retval |= register_write(dev->core, IVTV_REG_ENC_SDRAM_REFRESH, 0x80000640); + retval |= register_write(dev->core, IVTV_REG_ENC_SDRAM_PRECHARGE, 0x1A); msleep(1); - retval |= register_write(dev->core, IVTV_REG_APU, 0); + retval |= register_write(dev->core, IVTV_REG_APU, 0); if (retval < 0) dprintk(0, "Error with register_write\n"); @@ -657,13 +657,13 @@ static int blackbird_load_firmware(struct cx8802_dev *dev) release_firmware(firmware); dprintk(0, "Firmware upload successful.\n"); - retval |= register_write(dev->core, IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST); - retval |= register_read(dev->core, IVTV_REG_SPU, &value); - retval |= register_write(dev->core, IVTV_REG_SPU, value & 0xFFFFFFFE); + retval |= register_write(dev->core, IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST); + retval |= register_read(dev->core, IVTV_REG_SPU, &value); + retval |= register_write(dev->core, IVTV_REG_SPU, value & 0xFFFFFFFE); msleep(1); retval |= register_read(dev->core, IVTV_REG_VPU, &value); - retval |= register_write(dev->core, IVTV_REG_VPU, value & 0xFFFFFFE8); + retval |= register_write(dev->core, IVTV_REG_VPU, value & 0xFFFFFFE8); if (retval < 0) dprintk(0, "Error with register_write\n"); @@ -683,84 +683,560 @@ DB* DVD | MPEG2 | 720x576PAL | CBR | 600 :Good | 6000 Kbps | 25fps | M ================================================================================================================= *DB: "DirectBurn" */ -static void blackbird_codec_settings(struct cx8802_dev *dev) + +static struct blackbird_dnr default_dnr_params = { + .mode = BLACKBIRD_DNR_BITS_MANUAL, + .type = BLACKBIRD_MEDIAN_FILTER_DISABLED, + .spatial = 0, + .temporal = 0 +}; +static struct v4l2_mpeg_compression default_mpeg_params = { + .st_type = V4L2_MPEG_PS_2, + .st_bitrate = { + .mode = V4L2_BITRATE_CBR, + .min = 0, + .target = 0, + .max = 0 + }, + .ts_pid_pmt = 16, + .ts_pid_audio = 260, + .ts_pid_video = 256, + .ts_pid_pcr = 259, + .ps_size = 0, + .au_type = V4L2_MPEG_AU_2_II, + .au_bitrate = { + .mode = V4L2_BITRATE_CBR, + .min = 224, + .target = 224, + .max = 224 + }, + .au_sample_rate = 44100, + .au_pesid = 0, + .vi_type = V4L2_MPEG_VI_2, + .vi_aspect_ratio = V4L2_MPEG_ASPECT_4_3, + .vi_bitrate = { + .mode = V4L2_BITRATE_CBR, + .min = 4000, + .target = 4500, + .max = 6000 + }, + .vi_frame_rate = 25, + .vi_frames_per_gop = 15, + .vi_bframes_count = 2, + .vi_pesid = 0, + .closed_gops = 0, + .pulldown = 0 +}; + +static enum blackbird_stream_type mpeg_stream_types[] = { + [V4L2_MPEG_SS_1] = BLACKBIRD_STREAM_MPEG1, + [V4L2_MPEG_PS_2] = BLACKBIRD_STREAM_PROGRAM, + [V4L2_MPEG_TS_2] = BLACKBIRD_STREAM_TRANSPORT, + [V4L2_MPEG_PS_DVD] = BLACKBIRD_STREAM_DVD, +}; +static enum blackbird_aspect_ratio mpeg_stream_ratios[] = { + [V4L2_MPEG_ASPECT_SQUARE] = BLACKBIRD_ASPECT_RATIO_1_1_SQUARE, + [V4L2_MPEG_ASPECT_4_3] = BLACKBIRD_ASPECT_RATIO_4_3, + [V4L2_MPEG_ASPECT_16_9] = BLACKBIRD_ASPECT_RATIO_16_9, + [V4L2_MPEG_ASPECT_1_221] = BLACKBIRD_ASPECT_RATIO_221_100, +}; +static enum blackbird_video_bitrate_type mpeg_video_bitrates[] = { + [V4L2_BITRATE_NONE] = BLACKBIRD_VIDEO_CBR, + [V4L2_BITRATE_CBR] = BLACKBIRD_VIDEO_CBR, + [V4L2_BITRATE_VBR] = BLACKBIRD_VIDEO_VBR, +}; +/* find the best layer I/II bitrate to fit a given numeric value */ +struct bitrate_bits { + u32 bits; /* layer bits for the best fit */ + u32 rate; /* actual numeric value for the layer best fit */ +}; +struct bitrate_approximation { + u32 target; /* numeric value of the rate we want */ + struct bitrate_bits layer[2]; +}; +static struct bitrate_approximation mpeg_audio_bitrates[] = { + /* target layer[0].bits layer[0].rate layer[1].bits layer[1].rate */ + { 0, { { 0, 0, }, { 0, 0, }, }, }, + { 32, { { BLACKBIRD_AUDIO_BITS_LAYER_1_32 , 32, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_32 , 32, }, }, }, + { 48, { { BLACKBIRD_AUDIO_BITS_LAYER_1_64 , 64, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_48 , 48, }, }, }, + { 56, { { BLACKBIRD_AUDIO_BITS_LAYER_1_64 , 64, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_56 , 56, }, }, }, + { 64, { { BLACKBIRD_AUDIO_BITS_LAYER_1_64 , 64, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_64 , 64, }, }, }, + { 80, { { BLACKBIRD_AUDIO_BITS_LAYER_1_96 , 96, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_80 , 80, }, }, }, + { 96, { { BLACKBIRD_AUDIO_BITS_LAYER_1_96 , 96, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_96 , 96, }, }, }, + { 112, { { BLACKBIRD_AUDIO_BITS_LAYER_1_128, 128, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_112, 112, }, }, }, + { 128, { { BLACKBIRD_AUDIO_BITS_LAYER_1_128, 128, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_128, 128, }, }, }, + { 160, { { BLACKBIRD_AUDIO_BITS_LAYER_1_160, 160, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_160, 160, }, }, }, + { 192, { { BLACKBIRD_AUDIO_BITS_LAYER_1_192, 192, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_192, 192, }, }, }, + { 224, { { BLACKBIRD_AUDIO_BITS_LAYER_1_224, 224, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_224, 224, }, }, }, + { 256, { { BLACKBIRD_AUDIO_BITS_LAYER_1_256, 256, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_256, 256, }, }, }, + { 288, { { BLACKBIRD_AUDIO_BITS_LAYER_1_288, 288, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_320, 320, }, }, }, + { 320, { { BLACKBIRD_AUDIO_BITS_LAYER_1_320, 320, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_320, 320, }, }, }, + { 352, { { BLACKBIRD_AUDIO_BITS_LAYER_1_352, 352, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_384, 384, }, }, }, + { 384, { { BLACKBIRD_AUDIO_BITS_LAYER_1_384, 384, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_384, 384, }, }, }, + { 416, { { BLACKBIRD_AUDIO_BITS_LAYER_1_416, 416, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_384, 384, }, }, }, + { 448, { { BLACKBIRD_AUDIO_BITS_LAYER_1_448, 448, }, { BLACKBIRD_AUDIO_BITS_LAYER_2_384, 384, }, }, }, +}; +static const int BITRATES_SIZE = ARRAY_SIZE(mpeg_audio_bitrates); + +static void blackbird_set_default_params(struct cx8802_dev *dev) { - int bitrate_mode = 1; - int bitrate = 7500000; - int bitrate_peak = 7500000; - bitrate_mode = BLACKBIRD_VIDEO_CBR; - bitrate = 4000*1024; - bitrate_peak = 4000*1024; + struct v4l2_mpeg_compression *params = &dev->params; + u32 au_params; /* assign stream type */ - blackbird_api_cmd(dev, BLACKBIRD_API_SET_STREAM_TYPE, 1, 0, BLACKBIRD_STREAM_PROGRAM); - - /* assign output port */ - blackbird_api_cmd(dev, BLACKBIRD_API_SET_OUTPUT_PORT, 1, 0, BLACKBIRD_OUTPUT_PORT_STREAMING); /* Host */ + if( params->st_type >= ARRAY_SIZE(mpeg_stream_types) ) + params->st_type = V4L2_MPEG_PS_2; + if( params->st_type == V4L2_MPEG_SS_1 ) + params->vi_type = V4L2_MPEG_VI_1; + else + params->vi_type = V4L2_MPEG_VI_2; + blackbird_api_cmd(dev, BLACKBIRD_API_SET_STREAM_TYPE, 1, 0, mpeg_stream_types[params->st_type]); /* assign framerate */ - blackbird_api_cmd(dev, BLACKBIRD_API_SET_FRAMERATE, 1, 0, BLACKBIRD_FRAMERATE_PAL_25); - - /* assign frame size */ - blackbird_api_cmd(dev, BLACKBIRD_API_SET_RESOLUTION, 2, 0, - dev->height, dev->width); + if( params->vi_frame_rate <= 25 ) + { + params->vi_frame_rate = 25; + blackbird_api_cmd(dev, BLACKBIRD_API_SET_FRAMERATE, 1, 0, BLACKBIRD_FRAMERATE_PAL_25); + } + else + { + params->vi_frame_rate = 30; + blackbird_api_cmd(dev, BLACKBIRD_API_SET_FRAMERATE, 1, 0, BLACKBIRD_FRAMERATE_NTSC_30); + } /* assign aspect ratio */ - blackbird_api_cmd(dev, BLACKBIRD_API_SET_ASPECT_RATIO, 1, 0, BLACKBIRD_ASPECT_RATIO_4_3); - - /* assign bitrates */ - blackbird_api_cmd(dev, BLACKBIRD_API_SET_VIDEO_BITRATE, 5, 0, - bitrate_mode, /* mode */ - bitrate, /* bps */ - bitrate_peak / BLACKBIRD_PEAK_RATE_DIVISOR, /* peak/400 */ - BLACKBIRD_MUX_RATE_DEFAULT /*, 0x70*/); /* encoding buffer, ckennedy */ + if( params->vi_aspect_ratio >= ARRAY_SIZE(mpeg_stream_ratios) ) + params->vi_aspect_ratio = V4L2_MPEG_ASPECT_4_3; + blackbird_api_cmd(dev, BLACKBIRD_API_SET_ASPECT_RATIO, 1, 0, mpeg_stream_ratios[params->vi_aspect_ratio]); /* assign gop properties */ - blackbird_api_cmd(dev, BLACKBIRD_API_SET_GOP_STRUCTURE, 2, 0, 15, 3); + blackbird_api_cmd(dev, BLACKBIRD_API_SET_GOP_STRUCTURE, 2, 0, params->vi_frames_per_gop, params->vi_bframes_count+1); + + /* assign gop closure */ + blackbird_api_cmd(dev, BLACKBIRD_API_SET_GOP_CLOSURE, 1, 0, params->closed_gops); /* assign 3 2 pulldown */ - blackbird_api_cmd(dev, BLACKBIRD_API_SET_3_2_PULLDOWN, 1, 0, BLACKBIRD_3_2_PULLDOWN_DISABLED); + blackbird_api_cmd(dev, BLACKBIRD_API_SET_3_2_PULLDOWN, 1, 0, params->pulldown); + + /* make sure the params are within bounds */ + if( params->st_bitrate.mode >= ARRAY_SIZE(mpeg_video_bitrates) ) + params->vi_bitrate.mode = V4L2_BITRATE_NONE; + if( params->vi_bitrate.mode >= ARRAY_SIZE(mpeg_video_bitrates) ) + params->vi_bitrate.mode = V4L2_BITRATE_NONE; + if( params->au_bitrate.mode >= ARRAY_SIZE(mpeg_video_bitrates) ) + params->au_bitrate.mode = V4L2_BITRATE_NONE; /* assign audio properties */ /* note: it's not necessary to set the samplerate, the mpeg encoder seems to autodetect/adjust */ - /* blackbird_api_cmd(dev, IVTV_API_ASSIGN_AUDIO_PROPERTIES, 1, 0, (2<<2) | (8<<4)); - blackbird_api_cmd(dev, IVTV_API_ASSIGN_AUDIO_PROPERTIES, 1, 0, 0 | (2 << 2) | (14 << 4)); */ - blackbird_api_cmd(dev, BLACKBIRD_API_SET_AUDIO_PARAMS, 1, 0, - BLACKBIRD_AUDIO_BITS_44100HZ | - BLACKBIRD_AUDIO_BITS_LAYER_2 | - BLACKBIRD_AUDIO_BITS_LAYER_2_224 | - BLACKBIRD_AUDIO_BITS_STEREO | + au_params = BLACKBIRD_AUDIO_BITS_STEREO | /* BLACKBIRD_AUDIO_BITS_BOUND_4 | */ BLACKBIRD_AUDIO_BITS_EMPHASIS_NONE | BLACKBIRD_AUDIO_BITS_CRC_OFF | BLACKBIRD_AUDIO_BITS_COPYRIGHT_OFF | - BLACKBIRD_AUDIO_BITS_COPY - ); + BLACKBIRD_AUDIO_BITS_COPY | + 0; + if( params->au_sample_rate <= 32000 ) + { + params->au_sample_rate = 32000; + au_params |= BLACKBIRD_AUDIO_BITS_32000HZ; + } + else if( params->au_sample_rate <= 44100 ) + { + params->au_sample_rate = 44100; + au_params |= BLACKBIRD_AUDIO_BITS_44100HZ; + } + else + { + params->au_sample_rate = 48000; + au_params |= BLACKBIRD_AUDIO_BITS_48000HZ; + } + if( params->au_type == V4L2_MPEG_AU_2_I ) + { + au_params |= BLACKBIRD_AUDIO_BITS_LAYER_1; + } + else + { + /* TODO: try to handle the other formats more gracefully */ + params->au_type = V4L2_MPEG_AU_2_II; + au_params |= BLACKBIRD_AUDIO_BITS_LAYER_2; + } + if( params->au_bitrate.mode ) + { + int layer; + + if( params->au_bitrate.mode == V4L2_BITRATE_CBR ) + params->au_bitrate.max = params->vi_bitrate.target; + else + params->au_bitrate.target = params->vi_bitrate.max; + + layer = params->au_type; + if( params->au_bitrate.target == 0 ) + { + /* TODO: use the minimum possible bitrate instead of 0 ? */ + au_params |= 0; + } + else if( params->au_bitrate.target >= + mpeg_audio_bitrates[BITRATES_SIZE-1].layer[layer].rate ) + { + /* clamp the bitrate to the max supported by the standard */ + params->au_bitrate.target = mpeg_audio_bitrates[BITRATES_SIZE-1].layer[layer].rate; + params->au_bitrate.max = params->au_bitrate.target; + au_params |= mpeg_audio_bitrates[BITRATES_SIZE-1].layer[layer].bits; + } + else + { + /* round up to the nearest supported bitrate */ + int i; + for(i = 1; i < BITRATES_SIZE; i++) + { + if( params->au_bitrate.target > mpeg_audio_bitrates[i-1].layer[layer].rate && + params->au_bitrate.target <= mpeg_audio_bitrates[i].layer[layer].rate ) + { + params->au_bitrate.target = mpeg_audio_bitrates[i].layer[layer].rate; + params->au_bitrate.max = params->au_bitrate.target; + au_params |= mpeg_audio_bitrates[i].layer[layer].bits; + break; + } + } + } + } + else + { + /* TODO: ??? */ + params->au_bitrate.target = params->au_bitrate.max = 0; + au_params |= 0; + } + blackbird_api_cmd(dev, BLACKBIRD_API_SET_AUDIO_PARAMS, 1, 0, au_params ); + + /* assign bitrates */ + if( params->vi_bitrate.mode ) + { + /* bitrate is set, let's figure out the cbr/vbr mess */ + if( params->vi_bitrate.max < params->vi_bitrate.target ) + { + if( params->vi_bitrate.mode == V4L2_BITRATE_CBR ) + params->vi_bitrate.max = params->vi_bitrate.target; + else + params->vi_bitrate.target = params->vi_bitrate.max; + } + } + else + { + if( params->st_bitrate.max < params->st_bitrate.target ) + { + if( params->st_bitrate.mode == V4L2_BITRATE_VBR ) + params->st_bitrate.target = params->st_bitrate.max; + else + params->st_bitrate.max = params->st_bitrate.target; + } + /* calculate vi_bitrate = st_bitrate - au_bitrate */ + params->vi_bitrate.max = params->st_bitrate.max - params->au_bitrate.max; + params->vi_bitrate.target = params->st_bitrate.target - params->au_bitrate.target; + } + blackbird_api_cmd(dev, BLACKBIRD_API_SET_VIDEO_BITRATE, 4, 0, + mpeg_video_bitrates[params->vi_bitrate.mode], + params->vi_bitrate.target * 1000, /* kbps -> bps */ + params->vi_bitrate.max * 1000 / BLACKBIRD_PEAK_RATE_DIVISOR, /* peak/400 */ + BLACKBIRD_MUX_RATE_DEFAULT /*, 0x70*/); /* encoding buffer, ckennedy */ + + /* TODO: implement the stream ID stuff: + ts_pid_pmt, ts_pid_audio, ts_pid_video, ts_pid_pcr, + ps_size, au_pesid, vi_pesid + */ +} +#define CHECK_PARAM( name ) ( dev->params.name != params->name ) +#define IF_PARAM( name ) if( CHECK_PARAM( name ) ) +#define UPDATE_PARAM( name ) dev->params.name = params->name +void blackbird_set_params(struct cx8802_dev *dev, struct v4l2_mpeg_compression *params) +{ + u32 au_params; + + /* assign stream type */ + if( params->st_type >= ARRAY_SIZE(mpeg_stream_types) ) + params->st_type = V4L2_MPEG_PS_2; + if( params->st_type == V4L2_MPEG_SS_1 ) + params->vi_type = V4L2_MPEG_VI_1; + else + params->vi_type = V4L2_MPEG_VI_2; + if( CHECK_PARAM( st_type ) || CHECK_PARAM( vi_type ) ) + { + UPDATE_PARAM( st_type ); + UPDATE_PARAM( vi_type ); + blackbird_api_cmd(dev, BLACKBIRD_API_SET_STREAM_TYPE, 1, 0, mpeg_stream_types[params->st_type]); + } + + /* assign framerate */ + if( params->vi_frame_rate <= 25 ) + params->vi_frame_rate = 25; + else + params->vi_frame_rate = 30; + IF_PARAM( vi_frame_rate ) + { + UPDATE_PARAM( vi_frame_rate ); + if( params->vi_frame_rate == 25 ) + blackbird_api_cmd(dev, BLACKBIRD_API_SET_FRAMERATE, 1, 0, BLACKBIRD_FRAMERATE_PAL_25); + else + blackbird_api_cmd(dev, BLACKBIRD_API_SET_FRAMERATE, 1, 0, BLACKBIRD_FRAMERATE_NTSC_30); + } + + /* assign aspect ratio */ + if( params->vi_aspect_ratio >= ARRAY_SIZE(mpeg_stream_ratios) ) + params->vi_aspect_ratio = V4L2_MPEG_ASPECT_4_3; + IF_PARAM( vi_aspect_ratio ) + { + UPDATE_PARAM( vi_aspect_ratio ); + blackbird_api_cmd(dev, BLACKBIRD_API_SET_ASPECT_RATIO, 1, 0, mpeg_stream_ratios[params->vi_aspect_ratio]); + } + + /* assign gop properties */ + if( CHECK_PARAM( vi_frames_per_gop ) || CHECK_PARAM( vi_bframes_count ) ) + { + UPDATE_PARAM( vi_frames_per_gop ); + UPDATE_PARAM( vi_bframes_count ); + blackbird_api_cmd(dev, BLACKBIRD_API_SET_GOP_STRUCTURE, 2, 0, params->vi_frames_per_gop, params->vi_bframes_count+1); + } /* assign gop closure */ - blackbird_api_cmd(dev, BLACKBIRD_API_SET_GOP_CLOSURE, 1, 0, BLACKBIRD_GOP_CLOSURE_OFF); + IF_PARAM( closed_gops ) + { + UPDATE_PARAM( closed_gops ); + blackbird_api_cmd(dev, BLACKBIRD_API_SET_GOP_CLOSURE, 1, 0, params->closed_gops); + } + + /* assign 3 2 pulldown */ + IF_PARAM( pulldown ) + { + UPDATE_PARAM( pulldown ); + blackbird_api_cmd(dev, BLACKBIRD_API_SET_3_2_PULLDOWN, 1, 0, params->pulldown); + } + + /* make sure the params are within bounds */ + if( params->st_bitrate.mode >= ARRAY_SIZE(mpeg_video_bitrates) ) + params->vi_bitrate.mode = V4L2_BITRATE_NONE; + if( params->vi_bitrate.mode >= ARRAY_SIZE(mpeg_video_bitrates) ) + params->vi_bitrate.mode = V4L2_BITRATE_NONE; + if( params->au_bitrate.mode >= ARRAY_SIZE(mpeg_video_bitrates) ) + params->au_bitrate.mode = V4L2_BITRATE_NONE; + + /* assign audio properties */ + /* note: it's not necessary to set the samplerate, the mpeg encoder seems to autodetect/adjust */ + au_params = BLACKBIRD_AUDIO_BITS_STEREO | + /* BLACKBIRD_AUDIO_BITS_BOUND_4 | */ + BLACKBIRD_AUDIO_BITS_EMPHASIS_NONE | + BLACKBIRD_AUDIO_BITS_CRC_OFF | + BLACKBIRD_AUDIO_BITS_COPYRIGHT_OFF | + BLACKBIRD_AUDIO_BITS_COPY | + 0; + if( params->au_sample_rate < 32000 ) + { + params->au_sample_rate = 32000; + au_params |= BLACKBIRD_AUDIO_BITS_32000HZ; + } + else if( params->au_sample_rate < 44100 ) + { + params->au_sample_rate = 44100; + au_params |= BLACKBIRD_AUDIO_BITS_44100HZ; + } + else + { + params->au_sample_rate = 48000; + au_params |= BLACKBIRD_AUDIO_BITS_48000HZ; + } + if( params->au_type == V4L2_MPEG_AU_2_I ) + { + au_params |= BLACKBIRD_AUDIO_BITS_LAYER_1; + } + else + { + /* TODO: try to handle the other formats more gracefully */ + params->au_type = V4L2_MPEG_AU_2_II; + au_params |= BLACKBIRD_AUDIO_BITS_LAYER_2; + } + if( params->au_bitrate.mode ) + { + int layer; + + if( params->au_bitrate.mode == V4L2_BITRATE_CBR ) + params->au_bitrate.max = params->vi_bitrate.target; + else + params->au_bitrate.target = params->vi_bitrate.max; + + layer = params->au_type; + if( params->au_bitrate.target == 0 ) + { + /* TODO: use the minimum possible bitrate instead of 0 ? */ + au_params |= 0; + } + else if( params->au_bitrate.target >= + mpeg_audio_bitrates[BITRATES_SIZE-1].layer[layer].rate ) + { + /* clamp the bitrate to the max supported by the standard */ + params->au_bitrate.target = mpeg_audio_bitrates[BITRATES_SIZE-1].layer[layer].rate; + params->au_bitrate.max = params->au_bitrate.target; + au_params |= mpeg_audio_bitrates[BITRATES_SIZE-1].layer[layer].bits; + } + else + { + /* round up to the nearest supported bitrate */ + int i; + for(i = 1; i < BITRATES_SIZE; i++) + { + if( params->au_bitrate.target > mpeg_audio_bitrates[i-1].layer[layer].rate && + params->au_bitrate.target <= mpeg_audio_bitrates[i].layer[layer].rate ) + { + params->au_bitrate.target = mpeg_audio_bitrates[i].layer[layer].rate; + params->au_bitrate.max = params->au_bitrate.target; + au_params |= mpeg_audio_bitrates[i].layer[layer].bits; + break; + } + } + } + } + else + { + /* TODO: ??? */ + params->au_bitrate.target = params->au_bitrate.max = 0; + au_params |= 0; + } + if( CHECK_PARAM( au_type ) || CHECK_PARAM( au_sample_rate ) + || CHECK_PARAM( au_bitrate.mode ) || CHECK_PARAM( au_bitrate.max ) + || CHECK_PARAM( au_bitrate.target ) + ) + { + UPDATE_PARAM( au_type ); + UPDATE_PARAM( au_sample_rate ); + UPDATE_PARAM( au_bitrate ); + blackbird_api_cmd(dev, BLACKBIRD_API_SET_AUDIO_PARAMS, 1, 0, au_params ); + } + + /* assign bitrates */ + if( params->vi_bitrate.mode ) + { + /* bitrate is set, let's figure out the cbr/vbr mess */ + if( params->vi_bitrate.max < params->vi_bitrate.target ) + { + if( params->vi_bitrate.mode == V4L2_BITRATE_CBR ) + params->vi_bitrate.max = params->vi_bitrate.target; + else + params->vi_bitrate.target = params->vi_bitrate.max; + } + } + else + { + if( params->st_bitrate.max < params->st_bitrate.target ) + { + if( params->st_bitrate.mode == V4L2_BITRATE_VBR ) + params->st_bitrate.target = params->st_bitrate.max; + else + params->st_bitrate.max = params->st_bitrate.target; + } + /* calculate vi_bitrate = st_bitrate - au_bitrate */ + params->vi_bitrate.max = params->st_bitrate.max - params->au_bitrate.max; + params->vi_bitrate.target = params->st_bitrate.target - params->au_bitrate.target; + } + UPDATE_PARAM( st_bitrate ); + if( CHECK_PARAM( vi_bitrate.mode ) || CHECK_PARAM( vi_bitrate.max ) + || CHECK_PARAM( vi_bitrate.target ) + ) + { + UPDATE_PARAM( vi_bitrate ); + blackbird_api_cmd(dev, BLACKBIRD_API_SET_VIDEO_BITRATE, 4, 0, + mpeg_video_bitrates[params->vi_bitrate.mode], + params->vi_bitrate.target * 1000, /* kbps -> bps */ + params->vi_bitrate.max * 1000 / BLACKBIRD_PEAK_RATE_DIVISOR, /* peak/400 */ + BLACKBIRD_MUX_RATE_DEFAULT /*, 0x70*/); /* encoding buffer, ckennedy */ + } + /* TODO: implement the stream ID stuff: + ts_pid_pmt, ts_pid_audio, ts_pid_video, ts_pid_pcr, + ps_size, au_pesid, vi_pesid + */ + UPDATE_PARAM( ts_pid_pmt ); + UPDATE_PARAM( ts_pid_audio ); + UPDATE_PARAM( ts_pid_video ); + UPDATE_PARAM( ts_pid_pcr ); + UPDATE_PARAM( ps_size ); + UPDATE_PARAM( au_pesid ); + UPDATE_PARAM( vi_pesid ); +} +static void blackbird_set_default_dnr_params(struct cx8802_dev *dev) +{ /* assign dnr filter mode */ + if( dev->dnr_params.mode > BLACKBIRD_DNR_BITS_AUTO ) + dev->dnr_params.mode = BLACKBIRD_DNR_BITS_MANUAL; + if( dev->dnr_params.type > BLACKBIRD_MEDIAN_FILTER_DIAGONAL ) + dev->dnr_params.type = BLACKBIRD_MEDIAN_FILTER_DISABLED; blackbird_api_cmd(dev, BLACKBIRD_API_SET_DNR_MODE, 2, 0, - BLACKBIRD_DNR_BITS_MANUAL, - BLACKBIRD_MEDIAN_FILTER_DISABLED - ); + dev->dnr_params.mode, + dev->dnr_params.type + ); /* assign dnr filter props*/ - blackbird_api_cmd(dev, BLACKBIRD_API_SET_MANUAL_DNR, 2, 0, 0, 0); + if( dev->dnr_params.spatial > 15 ) + dev->dnr_params.spatial = 15; + if( dev->dnr_params.temporal > 31 ) + dev->dnr_params.temporal = 31; + blackbird_api_cmd(dev, BLACKBIRD_API_SET_MANUAL_DNR, 2, 0, + dev->dnr_params.spatial, + dev->dnr_params.temporal + ); +} +#define CHECK_DNR_PARAM( name ) ( dev->dnr_params.name != dnr_params->name ) +#define UPDATE_DNR_PARAM( name ) dev->dnr_params.name = dnr_params->name +void blackbird_set_dnr_params(struct cx8802_dev *dev, struct blackbird_dnr* dnr_params) +{ + /* assign dnr filter mode */ + /* clamp values */ + if( dnr_params->mode > BLACKBIRD_DNR_BITS_AUTO ) + dnr_params->mode = BLACKBIRD_DNR_BITS_MANUAL; + if( dnr_params->type > BLACKBIRD_MEDIAN_FILTER_DIAGONAL ) + dnr_params->type = BLACKBIRD_MEDIAN_FILTER_DISABLED; + /* check if the params actually changed */ + if( CHECK_DNR_PARAM( mode ) || CHECK_DNR_PARAM( type ) ) + { + UPDATE_DNR_PARAM( mode ); + UPDATE_DNR_PARAM( type ); + blackbird_api_cmd(dev, BLACKBIRD_API_SET_DNR_MODE, 2, 0, dnr_params->mode, dnr_params->type); + } + + /* assign dnr filter props*/ + if( dnr_params->spatial > 15 ) + dnr_params->spatial = 15; + if( dnr_params->temporal > 31 ) + dnr_params->temporal = 31; + if( CHECK_DNR_PARAM( spatial ) || CHECK_DNR_PARAM( temporal ) ) + { + UPDATE_DNR_PARAM( spatial ); + UPDATE_DNR_PARAM( temporal ); + blackbird_api_cmd(dev, BLACKBIRD_API_SET_MANUAL_DNR, 2, 0, dnr_params->spatial, dnr_params->temporal); + } +} + +static void blackbird_codec_settings(struct cx8802_dev *dev) +{ + + /* assign output port */ + blackbird_api_cmd(dev, BLACKBIRD_API_SET_OUTPUT_PORT, 1, 0, BLACKBIRD_OUTPUT_PORT_STREAMING); /* Host */ + + /* assign frame size */ + blackbird_api_cmd(dev, BLACKBIRD_API_SET_RESOLUTION, 2, 0, + dev->height, dev->width); /* assign coring levels (luma_h, luma_l, chroma_h, chroma_l) */ blackbird_api_cmd(dev, BLACKBIRD_API_SET_DNR_MEDIAN, 4, 0, 0, 255, 0, 255); /* assign spatial filter type: luma_t: horiz_only, chroma_t: horiz_only */ blackbird_api_cmd(dev, BLACKBIRD_API_SET_SPATIAL_FILTER, 2, 0, - BLACKBIRD_SPATIAL_FILTER_LUMA_1D_HORIZ, - BLACKBIRD_SPATIAL_FILTER_CHROMA_1D_HORIZ - ); + BLACKBIRD_SPATIAL_FILTER_LUMA_1D_HORIZ, + BLACKBIRD_SPATIAL_FILTER_CHROMA_1D_HORIZ + ); /* assign frame drop rate */ /* blackbird_api_cmd(dev, IVTV_API_ASSIGN_FRAME_DROP_RATE, 1, 0, 0); */ + + blackbird_set_default_params(dev); + blackbird_set_default_dnr_params(dev); } static int blackbird_initialize_codec(struct cx8802_dev *dev) @@ -851,15 +1327,10 @@ static int bb_buf_setup(struct videobuf_queue *q, struct cx8802_fh *fh = q->priv_data; fh->dev->ts_packet_size = 188 * 4; /* was: 512 */ - fh->dev->ts_packet_count = 32; /* was: 100 */ + fh->dev->ts_packet_count = mpegbufs; /* was: 100 */ *size = fh->dev->ts_packet_size * fh->dev->ts_packet_count; - if (0 == *count) - *count = mpegbufs; - if (*count < 2) - *count = 2; - if (*count > 32) - *count = 32; + *count = fh->dev->ts_packet_count; return 0; } @@ -868,7 +1339,7 @@ bb_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, enum v4l2_field field) { struct cx8802_fh *fh = q->priv_data; - return cx8802_buf_prepare(fh->dev, (struct cx88_buffer*)vb); + return cx8802_buf_prepare(fh->dev, (struct cx88_buffer*)vb, field); } static void @@ -920,8 +1391,6 @@ static int mpeg_do_ioctl(struct inode *inode, struct file *file, V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | V4L2_CAP_STREAMING | - V4L2_CAP_VBI_CAPTURE | - V4L2_CAP_VIDEO_OVERLAY | 0; if (UNSET != core->tuner_type) cap->capabilities |= V4L2_CAP_TUNER; @@ -941,27 +1410,52 @@ static int mpeg_do_ioctl(struct inode *inode, struct file *file, memset(f,0,sizeof(*f)); f->index = index; - strlcpy(f->description, "MPEG TS", sizeof(f->description)); + strlcpy(f->description, "MPEG", sizeof(f->description)); f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; f->pixelformat = V4L2_PIX_FMT_MPEG; return 0; } case VIDIOC_G_FMT: - case VIDIOC_S_FMT: - case VIDIOC_TRY_FMT: { - /* FIXME -- quick'n'dirty for exactly one size ... */ struct v4l2_format *f = arg; memset(f,0,sizeof(*f)); f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = dev->ts_packet_size * dev->ts_packet_count; /* 188 * 4 * 1024; */ + f->fmt.pix.colorspace = 0; f->fmt.pix.width = dev->width; f->fmt.pix.height = dev->height; + f->fmt.pix.field = fh->mpegq.field; + dprintk(0,"VIDIOC_G_FMT: w: %d, h: %d, f: %d\n", + dev->width, dev->height, fh->mpegq.field ); + return 0; + } + case VIDIOC_TRY_FMT: + { + struct v4l2_format *f = arg; + + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = dev->ts_packet_size * dev->ts_packet_count; /* 188 * 4 * 1024; */; + f->fmt.pix.colorspace = 0; + dprintk(0,"VIDIOC_TRY_FMT: w: %d, h: %d, f: %d\n", + dev->width, dev->height, fh->mpegq.field ); + return 0; + } + case VIDIOC_S_FMT: + { + struct v4l2_format *f = arg; + + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; - f->fmt.pix.field = V4L2_FIELD_NONE; f->fmt.pix.bytesperline = 0; - f->fmt.pix.sizeimage = 188 * 4 * 1024; /* 1024 * 512 */ /* FIXME: BUFFER_SIZE */; + f->fmt.pix.sizeimage = dev->ts_packet_size * dev->ts_packet_count; /* 188 * 4 * 1024; */; f->fmt.pix.colorspace = 0; + dprintk(0,"VIDIOC_S_FMT: w: %d, h: %d, f: %d\n", + f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field ); return 0; } @@ -985,6 +1479,22 @@ static int mpeg_do_ioctl(struct inode *inode, struct file *file, case VIDIOC_STREAMOFF: return videobuf_streamoff(&fh->mpegq); + /* --- mpeg compression -------------------------------------- */ + case VIDIOC_G_MPEGCOMP: + { + struct v4l2_mpeg_compression *f = arg; + + memcpy(f,&dev->params,sizeof(*f)); + return 0; + } + case VIDIOC_S_MPEGCOMP: + { + struct v4l2_mpeg_compression *f = arg; + + blackbird_set_params(dev, f); + return 0; + } + default: return cx88_do_ioctl( inode, file, 0, dev->core, cmd, arg, cx88_ioctl_hook ); } @@ -1034,16 +1544,17 @@ static int mpeg_open(struct inode *inode, struct file *file) file->private_data = fh; fh->dev = dev; - /* FIXME: locking against other video device */ - cx88_set_scale(dev->core, dev->width, dev->height, - V4L2_FIELD_INTERLACED); - videobuf_queue_init(&fh->mpegq, &blackbird_qops, dev->pci, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, - V4L2_FIELD_TOP, + V4L2_FIELD_INTERLACED, sizeof(struct cx88_buffer), fh); + + /* FIXME: locking against other video device */ + cx88_set_scale(dev->core, dev->width, dev->height, + fh->mpegq.field); + return 0; } @@ -1173,6 +1684,8 @@ static int __devinit blackbird_probe(struct pci_dev *pci_dev, dev->core = core; dev->width = 720; dev->height = 576; + memcpy(&dev->params,&default_mpeg_params,sizeof(default_mpeg_params)); + memcpy(&dev->dnr_params,&default_dnr_params,sizeof(default_dnr_params)); err = cx8802_init_common(dev); if (0 != err) @@ -1199,7 +1712,7 @@ static int __devinit blackbird_probe(struct pci_dev *pci_dev, static void __devexit blackbird_remove(struct pci_dev *pci_dev) { - struct cx8802_dev *dev = pci_get_drvdata(pci_dev); + struct cx8802_dev *dev = pci_get_drvdata(pci_dev); /* blackbird */ blackbird_unregister_video(dev); @@ -1215,8 +1728,8 @@ static struct pci_device_id cx8802_pci_tbl[] = { { .vendor = 0x14f1, .device = 0x8802, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, },{ /* --- end of list --- */ } @@ -1224,10 +1737,10 @@ static struct pci_device_id cx8802_pci_tbl[] = { MODULE_DEVICE_TABLE(pci, cx8802_pci_tbl); static struct pci_driver blackbird_pci_driver = { - .name = "cx88-blackbird", - .id_table = cx8802_pci_tbl, - .probe = blackbird_probe, - .remove = __devexit_p(blackbird_remove), + .name = "cx88-blackbird", + .id_table = cx8802_pci_tbl, + .probe = blackbird_probe, + .remove = __devexit_p(blackbird_remove), .suspend = cx8802_suspend_common, .resume = cx8802_resume_common, }; @@ -1257,6 +1770,8 @@ module_exit(blackbird_fini); EXPORT_SYMBOL(cx88_ioctl_hook); EXPORT_SYMBOL(cx88_ioctl_translator); +EXPORT_SYMBOL(blackbird_set_params); +EXPORT_SYMBOL(blackbird_set_dnr_params); /* ----------------------------------------------------------- */ /* diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 4da91d535a5b..f2268631b7c0 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -126,27 +126,27 @@ struct cx88_board cx88_boards[] = { .input = {{ .type = CX88_VMUX_TELEVISION, .vmux = 0, - .gpio0 = 0x03ff, + .gpio0 = 0x03ff, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, - .gpio0 = 0x03fe, + .gpio0 = 0x03fe, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, - .gpio0 = 0x03fe, + .gpio0 = 0x03fe, }}, }, - [CX88_BOARD_WINFAST2000XP_EXPERT] = { - .name = "Leadtek Winfast 2000XP Expert", - .tuner_type = TUNER_PHILIPS_4IN1, + [CX88_BOARD_WINFAST2000XP_EXPERT] = { + .name = "Leadtek Winfast 2000XP Expert", + .tuner_type = TUNER_PHILIPS_4IN1, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, - .input = {{ - .type = CX88_VMUX_TELEVISION, - .vmux = 0, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, .gpio0 = 0x00F5e700, .gpio1 = 0x00003004, .gpio2 = 0x00F5e700, @@ -165,16 +165,16 @@ struct cx88_board cx88_boards[] = { .gpio1 = 0x00003004, .gpio2 = 0x00F5c700, .gpio3 = 0x02000000, - }}, - .radio = { - .type = CX88_RADIO, + }}, + .radio = { + .type = CX88_RADIO, .gpio0 = 0x00F5d700, .gpio1 = 0x00003004, .gpio2 = 0x00F5d700, .gpio3 = 0x02000000, - }, - }, - [CX88_BOARD_AVERTV_303] = { + }, + }, + [CX88_BOARD_AVERTV_STUDIO_303] = { .name = "AverTV Studio 303 (M126)", .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, .radio_type = UNSET, @@ -206,7 +206,7 @@ struct cx88_board cx88_boards[] = { .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, - .tda9887_conf = TDA9887_PRESENT, + .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER_NTSC, .input = {{ .type = CX88_VMUX_TELEVISION, .vmux = 0, @@ -214,32 +214,32 @@ struct cx88_board cx88_boards[] = { .gpio1 = 0x000080c0, .gpio2 = 0x0000ff40, },{ - .type = CX88_VMUX_COMPOSITE1, - .vmux = 1, + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, .gpio0 = 0x000040bf, .gpio1 = 0x000080c0, .gpio2 = 0x0000ff40, },{ - .type = CX88_VMUX_SVIDEO, - .vmux = 2, + .type = CX88_VMUX_SVIDEO, + .vmux = 2, .gpio0 = 0x000040bf, .gpio1 = 0x000080c0, .gpio2 = 0x0000ff40, - }}, - .radio = { + }}, + .radio = { .type = CX88_RADIO, - }, + }, }, [CX88_BOARD_WINFAST_DV2000] = { - .name = "Leadtek Winfast DV2000", - .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .name = "Leadtek Winfast DV2000", + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, - .input = {{ - .type = CX88_VMUX_TELEVISION, - .vmux = 0, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, .gpio0 = 0x0035e700, .gpio1 = 0x00003004, .gpio2 = 0x0035e700, @@ -260,14 +260,14 @@ struct cx88_board cx88_boards[] = { .gpio2 = 0x02000000, .gpio3 = 0x02000000, }}, - .radio = { + .radio = { .type = CX88_RADIO, .gpio0 = 0x0035d700, .gpio1 = 0x00007004, .gpio2 = 0x0035d700, .gpio3 = 0x02000000, }, - }, + }, [CX88_BOARD_LEADTEK_PVR2000] = { // gpio values for PAL version from regspy by DScaler .name = "Leadtek PVR 2000", @@ -296,25 +296,25 @@ struct cx88_board cx88_boards[] = { .blackbird = 1, }, [CX88_BOARD_IODATA_GVVCP3PCI] = { - .name = "IODATA GV-VCP3/PCI", + .name = "IODATA GV-VCP3/PCI", .tuner_type = TUNER_ABSENT, - .radio_type = UNSET, + .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .input = {{ - .type = CX88_VMUX_COMPOSITE1, - .vmux = 0, - },{ - .type = CX88_VMUX_COMPOSITE2, - .vmux = 1, - },{ - .type = CX88_VMUX_SVIDEO, - .vmux = 2, - }}, - }, + .type = CX88_VMUX_COMPOSITE1, + .vmux = 0, + },{ + .type = CX88_VMUX_COMPOSITE2, + .vmux = 1, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + }}, + }, [CX88_BOARD_PROLINK_PLAYTVPVR] = { - .name = "Prolink PlayTV PVR", - .tuner_type = TUNER_PHILIPS_FM1236_MK3, + .name = "Prolink PlayTV PVR", + .tuner_type = TUNER_PHILIPS_FM1236_MK3, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, @@ -348,15 +348,15 @@ struct cx88_board cx88_boards[] = { .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0x0000fde6, - },{ + },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0x0000fde6, // 0x0000fda6 L,R RCA audio in? }}, - .radio = { - .type = CX88_RADIO, + .radio = { + .type = CX88_RADIO, .gpio0 = 0x0000fde2, - }, + }, .blackbird = 1, }, [CX88_BOARD_MSI_TVANYWHERE] = { @@ -372,34 +372,34 @@ struct cx88_board cx88_boards[] = { .gpio0 = 0x00000fbf, .gpio2 = 0x0000fc08, },{ - .type = CX88_VMUX_COMPOSITE1, - .vmux = 1, + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, .gpio0 = 0x00000fbf, .gpio2 = 0x0000fc68, },{ - .type = CX88_VMUX_SVIDEO, - .vmux = 2, + .type = CX88_VMUX_SVIDEO, + .vmux = 2, .gpio0 = 0x00000fbf, .gpio2 = 0x0000fc68, - }}, + }}, }, - [CX88_BOARD_KWORLD_DVB_T] = { - .name = "KWorld/VStream XPert DVB-T", + [CX88_BOARD_KWORLD_DVB_T] = { + .name = "KWorld/VStream XPert DVB-T", .tuner_type = TUNER_ABSENT, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, - .input = {{ - .type = CX88_VMUX_COMPOSITE1, - .vmux = 1, + .input = {{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, .gpio0 = 0x0700, .gpio2 = 0x0101, - },{ - .type = CX88_VMUX_SVIDEO, - .vmux = 2, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, .gpio0 = 0x0700, .gpio2 = 0x0101, - }}, + }}, .dvb = 1, }, [CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1] = { @@ -425,27 +425,27 @@ struct cx88_board cx88_boards[] = { .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, - .input = {{ - .type = CX88_VMUX_TELEVISION, - .vmux = 0, - .gpio0 = 0x07f8, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x07f8, },{ .type = CX88_VMUX_DEBUG, .vmux = 0, .gpio0 = 0x07f9, // mono from tuner chip - },{ - .type = CX88_VMUX_COMPOSITE1, - .vmux = 1, - .gpio0 = 0x000007fa, - },{ - .type = CX88_VMUX_SVIDEO, - .vmux = 2, - .gpio0 = 0x000007fa, - }}, - .radio = { - .type = CX88_RADIO, - .gpio0 = 0x000007f8, - }, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x000007fa, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x000007fa, + }}, + .radio = { + .type = CX88_RADIO, + .gpio0 = 0x000007f8, + }, }, [CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q] = { .name = "DViCO FusionHDTV 3 Gold-Q", @@ -489,28 +489,28 @@ struct cx88_board cx88_boards[] = { }}, .dvb = 1, }, - [CX88_BOARD_HAUPPAUGE_DVB_T1] = { + [CX88_BOARD_HAUPPAUGE_DVB_T1] = { .name = "Hauppauge Nova-T DVB-T", .tuner_type = TUNER_ABSENT, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .input = {{ - .type = CX88_VMUX_DVB, - .vmux = 0, - }}, + .type = CX88_VMUX_DVB, + .vmux = 0, + }}, .dvb = 1, }, - [CX88_BOARD_CONEXANT_DVB_T1] = { + [CX88_BOARD_CONEXANT_DVB_T1] = { .name = "Conexant DVB-T reference design", .tuner_type = TUNER_ABSENT, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, - .input = {{ - .type = CX88_VMUX_DVB, - .vmux = 0, - }}, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + }}, .dvb = 1, }, [CX88_BOARD_PROVIDEO_PV259] = { @@ -543,12 +543,12 @@ struct cx88_board cx88_boards[] = { .dvb = 1, }, [CX88_BOARD_DNTV_LIVE_DVB_T] = { - .name = "digitalnow DNTV Live! DVB-T", + .name = "digitalnow DNTV Live! DVB-T", .tuner_type = TUNER_ABSENT, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, - .input = {{ + .input = {{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0x00000700, @@ -705,44 +705,44 @@ struct cx88_board cx88_boards[] = { .gpio0 = 0xbf60, }, }, - [CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T] = { + [CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T] = { .name = "DViCO FusionHDTV 3 Gold-T", .tuner_type = TUNER_THOMSON_DTT7611, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .input = {{ - .type = CX88_VMUX_TELEVISION, - .vmux = 0, - .gpio0 = 0x97ed, - },{ - .type = CX88_VMUX_COMPOSITE1, - .vmux = 1, - .gpio0 = 0x97e9, - },{ - .type = CX88_VMUX_SVIDEO, - .vmux = 2, - .gpio0 = 0x97e9, - }}, + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x97ed, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x97e9, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x97e9, + }}, .dvb = 1, - }, - [CX88_BOARD_ADSTECH_DVB_T_PCI] = { - .name = "ADS Tech Instant TV DVB-T PCI", + }, + [CX88_BOARD_ADSTECH_DVB_T_PCI] = { + .name = "ADS Tech Instant TV DVB-T PCI", .tuner_type = TUNER_ABSENT, .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .input = {{ - .type = CX88_VMUX_COMPOSITE1, - .vmux = 1, + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, .gpio0 = 0x0700, .gpio2 = 0x0101, - },{ - .type = CX88_VMUX_SVIDEO, - .vmux = 2, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, .gpio0 = 0x0700, .gpio2 = 0x0101, - }}, + }}, .dvb = 1, }, [CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1] = { @@ -762,20 +762,139 @@ struct cx88_board cx88_boards[] = { .radio_addr = ADDR_UNSET, .tda9887_conf = TDA9887_PRESENT, .input = {{ - .type = CX88_VMUX_TELEVISION, - .vmux = 0, - .gpio0 = 0x87fd, - },{ - .type = CX88_VMUX_COMPOSITE1, - .vmux = 1, - .gpio0 = 0x87f9, - },{ - .type = CX88_VMUX_SVIDEO, - .vmux = 2, - .gpio0 = 0x87f9, - }}, + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x87fd, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x87f9, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x87f9, + }}, + .dvb = 1, + }, + [CX88_BOARD_AVERMEDIA_ULTRATV_MC_550] = { + .name = "AverMedia UltraTV Media Center PCI 550", + .tuner_type = TUNER_PHILIPS_FM1236_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .blackbird = 1, + .input = {{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 0, + .gpio0 = 0x0000cd73, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 1, + .gpio0 = 0x0000cd73, + },{ + .type = CX88_VMUX_TELEVISION, + .vmux = 3, + .gpio0 = 0x0000cdb3, + }}, + .radio = { + .type = CX88_RADIO, + .vmux = 2, + .gpio0 = 0x0000cdf3, + }, + }, + [CX88_BOARD_KWORLD_VSTREAM_EXPERT_DVD] = { + /* Alexander Wold <awold@bigfoot.com> */ + .name = "Kworld V-Stream Xpert DVD", + .tuner_type = UNSET, + .input = {{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x03000000, + .gpio1 = 0x01000000, + .gpio2 = 0x02000000, + .gpio3 = 0x00100000, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x03000000, + .gpio1 = 0x01000000, + .gpio2 = 0x02000000, + .gpio3 = 0x00100000, + }}, + }, + [CX88_BOARD_ATI_HDTVWONDER] = { + .name = "ATI HDTV Wonder", + .tuner_type = TUNER_PHILIPS_TUV1236D, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00000ff7, + .gpio1 = 0x000000ff, + .gpio2 = 0x00000001, + .gpio3 = 0x00000000, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00000ffe, + .gpio1 = 0x000000ff, + .gpio2 = 0x00000001, + .gpio3 = 0x00000000, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x00000ffe, + .gpio1 = 0x000000ff, + .gpio2 = 0x00000001, + .gpio3 = 0x00000000, + }}, .dvb = 1, }, + [CX88_BOARD_WINFAST_DTV1000] = { + .name = "WinFast DTV1000-T", + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_DVB, + .vmux = 0, + }}, + .dvb = 1, + }, + [CX88_BOARD_AVERTV_303] = { + .name = "AVerTV 303 (M126)", + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x00ff, + .gpio1 = 0xe09f, + .gpio2 = 0x0010, + .gpio3 = 0x0000, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x00ff, + .gpio1 = 0xe05f, + .gpio2 = 0x0010, + .gpio3 = 0x0000, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x00ff, + .gpio1 = 0xe05f, + .gpio2 = 0x0010, + .gpio3 = 0x0000, + }}, + }, }; const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards); @@ -804,41 +923,41 @@ struct cx88_subid cx88_subids[] = { .subdevice = 0x00f8, .card = CX88_BOARD_ATI_WONDER_PRO, },{ - .subvendor = 0x107d, - .subdevice = 0x6611, - .card = CX88_BOARD_WINFAST2000XP_EXPERT, + .subvendor = 0x107d, + .subdevice = 0x6611, + .card = CX88_BOARD_WINFAST2000XP_EXPERT, + },{ + .subvendor = 0x107d, + .subdevice = 0x6613, /* NTSC */ + .card = CX88_BOARD_WINFAST2000XP_EXPERT, },{ - .subvendor = 0x107d, - .subdevice = 0x6613, /* NTSC */ - .card = CX88_BOARD_WINFAST2000XP_EXPERT, + .subvendor = 0x107d, + .subdevice = 0x6620, + .card = CX88_BOARD_WINFAST_DV2000, + },{ + .subvendor = 0x107d, + .subdevice = 0x663b, + .card = CX88_BOARD_LEADTEK_PVR2000, },{ .subvendor = 0x107d, - .subdevice = 0x6620, - .card = CX88_BOARD_WINFAST_DV2000, - },{ - .subvendor = 0x107d, - .subdevice = 0x663b, - .card = CX88_BOARD_LEADTEK_PVR2000, - },{ - .subvendor = 0x107d, - .subdevice = 0x663C, - .card = CX88_BOARD_LEADTEK_PVR2000, - },{ + .subdevice = 0x663C, + .card = CX88_BOARD_LEADTEK_PVR2000, + },{ .subvendor = 0x1461, .subdevice = 0x000b, - .card = CX88_BOARD_AVERTV_303, + .card = CX88_BOARD_AVERTV_STUDIO_303, },{ .subvendor = 0x1462, .subdevice = 0x8606, .card = CX88_BOARD_MSI_TVANYWHERE_MASTER, },{ - .subvendor = 0x10fc, - .subdevice = 0xd003, - .card = CX88_BOARD_IODATA_GVVCP3PCI, + .subvendor = 0x10fc, + .subdevice = 0xd003, + .card = CX88_BOARD_IODATA_GVVCP3PCI, },{ - .subvendor = 0x1043, - .subdevice = 0x4823, /* with mpeg encoder */ - .card = CX88_BOARD_ASUS_PVR_416, + .subvendor = 0x1043, + .subdevice = 0x4823, /* with mpeg encoder */ + .card = CX88_BOARD_ASUS_PVR_416, },{ .subvendor = 0x17de, .subdevice = 0x08a6, @@ -852,43 +971,43 @@ struct cx88_subid cx88_subids[] = { .subdevice = 0xd820, .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T, },{ - .subvendor = 0x18AC, - .subdevice = 0xDB00, + .subvendor = 0x18ac, + .subdevice = 0xdb00, .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1, - },{ + },{ .subvendor = 0x0070, .subdevice = 0x9002, .card = CX88_BOARD_HAUPPAUGE_DVB_T1, - },{ + },{ .subvendor = 0x14f1, .subdevice = 0x0187, .card = CX88_BOARD_CONEXANT_DVB_T1, - },{ + },{ .subvendor = 0x1540, .subdevice = 0x2580, .card = CX88_BOARD_PROVIDEO_PV259, },{ - .subvendor = 0x18AC, - .subdevice = 0xDB10, + .subvendor = 0x18ac, + .subdevice = 0xdb10, .card = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS, },{ - .subvendor = 0x1554, - .subdevice = 0x4811, - .card = CX88_BOARD_PIXELVIEW, + .subvendor = 0x1554, + .subdevice = 0x4811, + .card = CX88_BOARD_PIXELVIEW, },{ .subvendor = 0x7063, .subdevice = 0x3000, /* HD-3000 card */ .card = CX88_BOARD_PCHDTV_HD3000, },{ - .subvendor = 0x17DE, - .subdevice = 0xA8A6, + .subvendor = 0x17de, + .subdevice = 0xa8a6, .card = CX88_BOARD_DNTV_LIVE_DVB_T, },{ .subvendor = 0x0070, .subdevice = 0x2801, .card = CX88_BOARD_HAUPPAUGE_ROSLYN, },{ - .subvendor = 0x14F1, + .subvendor = 0x14f1, .subdevice = 0x0342, .card = CX88_BOARD_DIGITALLOGIC_MEC, },{ @@ -899,14 +1018,30 @@ struct cx88_subid cx88_subids[] = { .subvendor = 0x1421, .subdevice = 0x0334, .card = CX88_BOARD_ADSTECH_DVB_T_PCI, - },{ + },{ .subvendor = 0x153b, .subdevice = 0x1166, .card = CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1, - },{ + },{ .subvendor = 0x18ac, .subdevice = 0xd500, .card = CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD, + },{ + .subvendor = 0x1461, + .subdevice = 0x8011, + .card = CX88_BOARD_AVERMEDIA_ULTRATV_MC_550, + },{ + .subvendor = PCI_VENDOR_ID_ATI, + .subdevice = 0xa101, + .card = CX88_BOARD_ATI_HDTVWONDER, + },{ + .subvendor = 0x107d, + .subdevice = 0x665f, + .card = CX88_BOARD_WINFAST_DTV1000, + },{ + .subvendor = 0x1461, + .subdevice = 0x000a, + .card = CX88_BOARD_AVERTV_303, }, }; const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids); @@ -1108,6 +1243,19 @@ void cx88_card_setup(struct cx88_core *core) cx_clear(MO_GP0_IO, 0x00000007); cx_set(MO_GP2_IO, 0x00000101); break; + case CX88_BOARD_ATI_HDTVWONDER: + if (0 == core->i2c_rc) { + /* enable tuner */ + int i; + u8 buffer [] = { 0x10,0x12,0x13,0x04,0x16,0x00,0x14,0x04,0x017,0x00 }; + core->i2c_client.addr = 0x0a; + + for (i = 0; i < 5; i++) + if (2 != i2c_master_send(&core->i2c_client,&buffer[i*2],2)) + printk(KERN_WARNING "%s: Unable to enable tuner(%i).\n", + core->name, i); + } + break; } if (cx88_boards[core->board].radio.type == CX88_RADIO) core->has_radio = 1; diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index dc5c5c1f3461..eb806af17182 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -31,7 +31,7 @@ #include <linux/interrupt.h> #include <linux/pci.h> #include <linux/delay.h> -#include <linux/videodev.h> +#include <linux/videodev2.h> #include "cx88.h" @@ -153,26 +153,26 @@ static u32* cx88_risc_field(u32 *rp, struct scatterlist *sglist, } if (bpl <= sg_dma_len(sg)-offset) { /* fits into current chunk */ - *(rp++)=cpu_to_le32(RISC_WRITE|RISC_SOL|RISC_EOL|bpl); - *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); - offset+=bpl; + *(rp++)=cpu_to_le32(RISC_WRITE|RISC_SOL|RISC_EOL|bpl); + *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); + offset+=bpl; } else { /* scanline needs to be splitted */ - todo = bpl; - *(rp++)=cpu_to_le32(RISC_WRITE|RISC_SOL| + todo = bpl; + *(rp++)=cpu_to_le32(RISC_WRITE|RISC_SOL| (sg_dma_len(sg)-offset)); - *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); - todo -= (sg_dma_len(sg)-offset); - offset = 0; - sg++; - while (todo > sg_dma_len(sg)) { - *(rp++)=cpu_to_le32(RISC_WRITE| + *(rp++)=cpu_to_le32(sg_dma_address(sg)+offset); + todo -= (sg_dma_len(sg)-offset); + offset = 0; + sg++; + while (todo > sg_dma_len(sg)) { + *(rp++)=cpu_to_le32(RISC_WRITE| sg_dma_len(sg)); - *(rp++)=cpu_to_le32(sg_dma_address(sg)); + *(rp++)=cpu_to_le32(sg_dma_address(sg)); todo -= sg_dma_len(sg); sg++; } - *(rp++)=cpu_to_le32(RISC_WRITE|RISC_EOL|todo); + *(rp++)=cpu_to_le32(RISC_WRITE|RISC_EOL|todo); *(rp++)=cpu_to_le32(sg_dma_address(sg)); offset += todo; } @@ -309,7 +309,7 @@ struct sram_channel cx88_sram_channels[] = { .name = "video y / packed", .cmds_start = 0x180040, .ctrl_start = 0x180400, - .cdt = 0x180400 + 64, + .cdt = 0x180400 + 64, .fifo_start = 0x180c00, .fifo_size = 0x002800, .ptr1_reg = MO_DMA21_PTR1, @@ -321,7 +321,7 @@ struct sram_channel cx88_sram_channels[] = { .name = "video u", .cmds_start = 0x180080, .ctrl_start = 0x1804a0, - .cdt = 0x1804a0 + 64, + .cdt = 0x1804a0 + 64, .fifo_start = 0x183400, .fifo_size = 0x000800, .ptr1_reg = MO_DMA22_PTR1, @@ -333,7 +333,7 @@ struct sram_channel cx88_sram_channels[] = { .name = "video v", .cmds_start = 0x1800c0, .ctrl_start = 0x180540, - .cdt = 0x180540 + 64, + .cdt = 0x180540 + 64, .fifo_start = 0x183c00, .fifo_size = 0x000800, .ptr1_reg = MO_DMA23_PTR1, @@ -345,7 +345,7 @@ struct sram_channel cx88_sram_channels[] = { .name = "vbi", .cmds_start = 0x180100, .ctrl_start = 0x1805e0, - .cdt = 0x1805e0 + 64, + .cdt = 0x1805e0 + 64, .fifo_start = 0x184400, .fifo_size = 0x001000, .ptr1_reg = MO_DMA24_PTR1, @@ -357,7 +357,7 @@ struct sram_channel cx88_sram_channels[] = { .name = "audio from", .cmds_start = 0x180140, .ctrl_start = 0x180680, - .cdt = 0x180680 + 64, + .cdt = 0x180680 + 64, .fifo_start = 0x185400, .fifo_size = 0x000200, .ptr1_reg = MO_DMA25_PTR1, @@ -369,7 +369,7 @@ struct sram_channel cx88_sram_channels[] = { .name = "audio to", .cmds_start = 0x180180, .ctrl_start = 0x180720, - .cdt = 0x180680 + 64, /* same as audio IN */ + .cdt = 0x180680 + 64, /* same as audio IN */ .fifo_start = 0x185400, /* same as audio IN */ .fifo_size = 0x000200, /* same as audio IN */ .ptr1_reg = MO_DMA26_PTR1, @@ -431,7 +431,7 @@ int cx88_sram_channel_setup(struct cx88_core *core, /* ------------------------------------------------------------------ */ /* debug helper code */ -int cx88_risc_decode(u32 risc) +static int cx88_risc_decode(u32 risc) { static char *instr[16] = { [ RISC_SYNC >> 28 ] = "sync", @@ -845,19 +845,19 @@ static int set_tvaudio(struct cx88_core *core) return 0; if (V4L2_STD_PAL_BG & norm->id) { - core->tvaudio = nicam ? WW_NICAM_BGDKL : WW_A2_BG; + core->tvaudio = WW_BG; } else if (V4L2_STD_PAL_DK & norm->id) { - core->tvaudio = nicam ? WW_NICAM_BGDKL : WW_A2_DK; + core->tvaudio = WW_DK; } else if (V4L2_STD_PAL_I & norm->id) { - core->tvaudio = WW_NICAM_I; + core->tvaudio = WW_I; } else if (V4L2_STD_SECAM_L & norm->id) { - core->tvaudio = WW_SYSTEM_L_AM; + core->tvaudio = WW_L; } else if (V4L2_STD_SECAM_DK & norm->id) { - core->tvaudio = WW_A2_DK; + core->tvaudio = WW_DK; } else if ((V4L2_STD_NTSC_M & norm->id) || (V4L2_STD_PAL_M & norm->id)) { @@ -1137,7 +1137,7 @@ struct cx88_core* cx88_core_get(struct pci_dev *pci) if (!core->radio_addr) core->radio_addr = cx88_boards[core->board].radio_addr; - printk(KERN_INFO "TV tuner %d at 0x%02x, Radio tuner %d at 0x%02x\n", + printk(KERN_INFO "TV tuner %d at 0x%02x, Radio tuner %d at 0x%02x\n", core->tuner_type, core->tuner_addr<<1, core->radio_type, core->radio_addr<<1); @@ -1146,6 +1146,7 @@ struct cx88_core* cx88_core_get(struct pci_dev *pci) /* init hardware */ cx88_reset(core); cx88_i2c_init(core,pci); + cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL); cx88_card_setup(core); cx88_ir_init(core,pci); diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 4334744652de..9cce91ec334b 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -29,7 +29,6 @@ #include <linux/file.h> #include <linux/suspend.h> - #include "cx88.h" #include "dvb-pll.h" @@ -46,6 +45,9 @@ #ifdef HAVE_LGDT330X # include "lgdt330x.h" #endif +#ifdef HAVE_NXT200X +# include "nxt200x.h" +#endif MODULE_DESCRIPTION("driver for cx2388x based DVB cards"); MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); @@ -78,7 +80,7 @@ static int dvb_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, enum v4l2_field field) { struct cx8802_dev *dev = q->priv_data; - return cx8802_buf_prepare(dev, (struct cx88_buffer*)vb); + return cx8802_buf_prepare(dev, (struct cx88_buffer*)vb,field); } static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) @@ -129,7 +131,7 @@ static int dntv_live_dvbt_demod_init(struct dvb_frontend* fe) static u8 reset [] = { 0x50, 0x80 }; static u8 adc_ctl_1_cfg [] = { 0x8E, 0x40 }; static u8 agc_cfg [] = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF, - 0x00, 0xFF, 0x00, 0x40, 0x40 }; + 0x00, 0xFF, 0x00, 0x40, 0x40 }; static u8 dntv_extra[] = { 0xB5, 0x7A }; static u8 capt_range_cfg[] = { 0x75, 0x32 }; @@ -285,6 +287,33 @@ static struct lgdt330x_config fusionhdtv_5_gold = { }; #endif +#ifdef HAVE_NXT200X +static int nxt200x_set_ts_param(struct dvb_frontend* fe, + int is_punctured) +{ + struct cx8802_dev *dev= fe->dvb->priv; + dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00; + return 0; +} + +static int nxt200x_set_pll_input(u8* buf, int input) +{ + if (input) + buf[3] |= 0x08; + else + buf[3] &= ~0x08; + return 0; +} + +static struct nxt200x_config ati_hdtvwonder = { + .demod_address = 0x0a, + .pll_address = 0x61, + .pll_desc = &dvb_pll_tuv1236d, + .set_pll_input = nxt200x_set_pll_input, + .set_ts_params = nxt200x_set_ts_param, +}; +#endif + static int dvb_register(struct cx8802_dev *dev) { /* init struct videobuf_dvb */ @@ -300,6 +329,7 @@ static int dvb_register(struct cx8802_dev *dev) break; case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1: case CX88_BOARD_CONEXANT_DVB_T1: + case CX88_BOARD_WINFAST_DTV1000: dev->dvb.frontend = cx22702_attach(&connexant_refboard_config, &dev->core->i2c_adap); break; @@ -385,6 +415,12 @@ static int dvb_register(struct cx8802_dev *dev) } break; #endif +#ifdef HAVE_NXT200X + case CX88_BOARD_ATI_HDTVWONDER: + dev->dvb.frontend = nxt200x_attach(&ati_hdtvwonder, + &dev->core->i2c_adap); + break; +#endif default: printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", dev->core->name); @@ -403,6 +439,9 @@ static int dvb_register(struct cx8802_dev *dev) /* Put the analog decoder in standby to keep it quiet */ cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL); + /* Put the analog decoder in standby to keep it quiet */ + cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL); + /* register everything */ return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev); } @@ -461,7 +500,7 @@ static int __devinit dvb_probe(struct pci_dev *pci_dev, static void __devexit dvb_remove(struct pci_dev *pci_dev) { - struct cx8802_dev *dev = pci_get_drvdata(pci_dev); + struct cx8802_dev *dev = pci_get_drvdata(pci_dev); /* dvb */ videobuf_dvb_unregister(&dev->dvb); @@ -476,8 +515,8 @@ static struct pci_device_id cx8802_pci_tbl[] = { { .vendor = 0x14f1, .device = 0x8802, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, },{ /* --- end of list --- */ } @@ -485,10 +524,10 @@ static struct pci_device_id cx8802_pci_tbl[] = { MODULE_DEVICE_TABLE(pci, cx8802_pci_tbl); static struct pci_driver dvb_pci_driver = { - .name = "cx88-dvb", - .id_table = cx8802_pci_tbl, - .probe = dvb_probe, - .remove = __devexit_p(dvb_remove), + .name = "cx88-dvb", + .id_table = cx8802_pci_tbl, + .probe = dvb_probe, + .remove = __devexit_p(dvb_remove), .suspend = cx8802_suspend_common, .resume = cx8802_resume_common, }; diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c index 761cebd40dbd..9790d412f192 100644 --- a/drivers/media/video/cx88/cx88-i2c.c +++ b/drivers/media/video/cx88/cx88-i2c.c @@ -3,7 +3,7 @@ cx88-i2c.c -- all the i2c code is here Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) - & Marcus Metzler (mocm@thp.uni-koeln.de) + & Marcus Metzler (mocm@thp.uni-koeln.de) (c) 2002 Yurij Sysoev <yurij@naturesoft.net> (c) 1999-2003 Gerd Knorr <kraxel@bytesex.org> @@ -90,7 +90,7 @@ static int cx8800_bit_getsda(void *data) static int attach_inform(struct i2c_client *client) { - struct tuner_setup tun_setup; + struct tuner_setup tun_setup; struct cx88_core *core = i2c_get_adapdata(client->adapter); dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n", @@ -98,7 +98,7 @@ static int attach_inform(struct i2c_client *client) if (!client->driver->command) return 0; - if (core->radio_type != UNSET) { + if (core->radio_type != UNSET) { if ((core->radio_addr==ADDR_UNSET)||(core->radio_addr==client->addr)) { tun_setup.mode_mask = T_RADIO; tun_setup.type = core->radio_type; @@ -106,8 +106,8 @@ static int attach_inform(struct i2c_client *client) client->driver->command (client, TUNER_SET_TYPE_ADDR, &tun_setup); } - } - if (core->tuner_type != UNSET) { + } + if (core->tuner_type != UNSET) { if ((core->tuner_addr==ADDR_UNSET)||(core->tuner_addr==client->addr)) { tun_setup.mode_mask = T_ANALOG_TV; @@ -116,7 +116,7 @@ static int attach_inform(struct i2c_client *client) client->driver->command (client,TUNER_SET_TYPE_ADDR, &tun_setup); } - } + } if (core->tda9887_conf) client->driver->command(client, TDA9887_SET_CONFIG, &core->tda9887_conf); @@ -159,7 +159,7 @@ static struct i2c_adapter cx8800_i2c_adap_template = { }; static struct i2c_client cx8800_i2c_client_template = { - .name = "cx88xx internal", + .name = "cx88xx internal", }; static char *i2c_devs[128] = { @@ -202,10 +202,10 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci) core->i2c_adap.dev.parent = &pci->dev; strlcpy(core->i2c_adap.name,core->name,sizeof(core->i2c_adap.name)); - core->i2c_algo.data = core; - i2c_set_adapdata(&core->i2c_adap,core); - core->i2c_adap.algo_data = &core->i2c_algo; - core->i2c_client.adapter = &core->i2c_adap; + core->i2c_algo.data = core; + i2c_set_adapdata(&core->i2c_adap,core); + core->i2c_adap.algo_data = &core->i2c_algo; + core->i2c_client.adapter = &core->i2c_adap; cx8800_bit_setscl(core,1); cx8800_bit_setsda(core,1); diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index c27fe4c36f69..38b12ebaa49e 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -553,7 +553,7 @@ void cx88_ir_irq(struct cx88_core *core) if ((ircode & 0xffff) != 0xeb04) { /* wrong address */ ir_dprintk("pulse distance decoded wrong address\n"); - break; + break; } if (((~ircode >> 24) & 0xff) != ((ircode >> 16) & 0xff)) { /* wrong checksum */ diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index ee2300e1ae0b..35e6d0c2b872 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -54,7 +54,7 @@ static int cx8802_start_dma(struct cx8802_dev *dev, { struct cx88_core *core = dev->core; - dprintk(0, "cx8802_start_dma %d\n", buf->vb.width); + dprintk(0, "cx8802_start_dma w: %d, h: %d, f: %d\n", dev->width, dev->height, buf->vb.field); /* setup fifo + format */ cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH28], @@ -158,7 +158,8 @@ static int cx8802_restart_queue(struct cx8802_dev *dev, /* ------------------------------------------------------------------ */ -int cx8802_buf_prepare(struct cx8802_dev *dev, struct cx88_buffer *buf) +int cx8802_buf_prepare(struct cx8802_dev *dev, struct cx88_buffer *buf, + enum v4l2_field field) { int size = dev->ts_packet_size * dev->ts_packet_count; int rc; @@ -171,7 +172,7 @@ int cx8802_buf_prepare(struct cx8802_dev *dev, struct cx88_buffer *buf) buf->vb.width = dev->ts_packet_size; buf->vb.height = dev->ts_packet_count; buf->vb.size = size; - buf->vb.field = V4L2_FIELD_TOP; + buf->vb.field = field /*V4L2_FIELD_TOP*/; if (0 != (rc = videobuf_iolock(dev->pci,&buf->vb,NULL))) goto fail; @@ -315,14 +316,14 @@ static void cx8802_mpeg_irq(struct cx8802_dev *dev) spin_unlock(&dev->slock); } - /* other general errors */ - if (status & 0x1f0100) { + /* other general errors */ + if (status & 0x1f0100) { dprintk( 0, "general errors: 0x%08x\n", status & 0x1f0100 ); - spin_lock(&dev->slock); + spin_lock(&dev->slock); cx8802_stop_dma(dev); - cx8802_restart_queue(dev,&dev->mpegq); - spin_unlock(&dev->slock); - } + cx8802_restart_queue(dev,&dev->mpegq); + spin_unlock(&dev->slock); + } } #define MAX_IRQ_LOOP 10 @@ -378,8 +379,8 @@ int cx8802_init_common(struct cx8802_dev *dev) } pci_read_config_byte(dev->pci, PCI_CLASS_REVISION, &dev->pci_rev); - pci_read_config_byte(dev->pci, PCI_LATENCY_TIMER, &dev->pci_lat); - printk(KERN_INFO "%s/2: found at %s, rev: %d, irq: %d, " + pci_read_config_byte(dev->pci, PCI_LATENCY_TIMER, &dev->pci_lat); + printk(KERN_INFO "%s/2: found at %s, rev: %d, irq: %d, " "latency: %d, mmio: 0x%lx\n", dev->core->name, pci_name(dev->pci), dev->pci_rev, dev->pci->irq, dev->pci_lat,pci_resource_start(dev->pci,0)); @@ -429,7 +430,7 @@ void cx8802_fini_common(struct cx8802_dev *dev) int cx8802_suspend_common(struct pci_dev *pci_dev, pm_message_t state) { - struct cx8802_dev *dev = pci_get_drvdata(pci_dev); + struct cx8802_dev *dev = pci_get_drvdata(pci_dev); struct cx88_core *core = dev->core; /* stop mpeg dma */ diff --git a/drivers/media/video/cx88/cx88-reg.h b/drivers/media/video/cx88/cx88-reg.h index 0a3a62fc9bbb..d3bf5b17b1d4 100644 --- a/drivers/media/video/cx88/cx88-reg.h +++ b/drivers/media/video/cx88/cx88-reg.h @@ -3,9 +3,9 @@ cx88x-hw.h - CX2388x register offsets Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) - 2001 Michael Eskin - 2002 Yurij Sysoev <yurij@naturesoft.net> - 2003 Gerd Knorr <kraxel@bytesex.org> + 2001 Michael Eskin + 2002 Yurij Sysoev <yurij@naturesoft.net> + 2003 Gerd Knorr <kraxel@bytesex.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -728,13 +728,13 @@ #define ColorFormatGamma 0x1000 #define Interlaced 0x1 -#define NonInterlaced 0x0 +#define NonInterlaced 0x0 #define FieldEven 0x1 #define FieldOdd 0x0 -#define TGReadWriteMode 0x0 -#define TGEnableMode 0x1 +#define TGReadWriteMode 0x0 +#define TGEnableMode 0x1 #define DV_CbAlign 0x0 #define DV_Y0Align 0x1 diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/video/cx88/cx88-tvaudio.c index 2765acee0285..6d9bec1c583b 100644 --- a/drivers/media/video/cx88/cx88-tvaudio.c +++ b/drivers/media/video/cx88/cx88-tvaudio.c @@ -57,39 +57,38 @@ #include "cx88.h" static unsigned int audio_debug = 0; -module_param(audio_debug,int,0644); -MODULE_PARM_DESC(audio_debug,"enable debug messages [audio]"); +module_param(audio_debug, int, 0644); +MODULE_PARM_DESC(audio_debug, "enable debug messages [audio]"); #define dprintk(fmt, arg...) if (audio_debug) \ printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg) /* ----------------------------------------------------------- */ -static char *aud_ctl_names[64] = -{ - [ EN_BTSC_FORCE_MONO ] = "BTSC_FORCE_MONO", - [ EN_BTSC_FORCE_STEREO ] = "BTSC_FORCE_STEREO", - [ EN_BTSC_FORCE_SAP ] = "BTSC_FORCE_SAP", - [ EN_BTSC_AUTO_STEREO ] = "BTSC_AUTO_STEREO", - [ EN_BTSC_AUTO_SAP ] = "BTSC_AUTO_SAP", - [ EN_A2_FORCE_MONO1 ] = "A2_FORCE_MONO1", - [ EN_A2_FORCE_MONO2 ] = "A2_FORCE_MONO2", - [ EN_A2_FORCE_STEREO ] = "A2_FORCE_STEREO", - [ EN_A2_AUTO_MONO2 ] = "A2_AUTO_MONO2", - [ EN_A2_AUTO_STEREO ] = "A2_AUTO_STEREO", - [ EN_EIAJ_FORCE_MONO1 ] = "EIAJ_FORCE_MONO1", - [ EN_EIAJ_FORCE_MONO2 ] = "EIAJ_FORCE_MONO2", - [ EN_EIAJ_FORCE_STEREO ] = "EIAJ_FORCE_STEREO", - [ EN_EIAJ_AUTO_MONO2 ] = "EIAJ_AUTO_MONO2", - [ EN_EIAJ_AUTO_STEREO ] = "EIAJ_AUTO_STEREO", - [ EN_NICAM_FORCE_MONO1 ] = "NICAM_FORCE_MONO1", - [ EN_NICAM_FORCE_MONO2 ] = "NICAM_FORCE_MONO2", - [ EN_NICAM_FORCE_STEREO ] = "NICAM_FORCE_STEREO", - [ EN_NICAM_AUTO_MONO2 ] = "NICAM_AUTO_MONO2", - [ EN_NICAM_AUTO_STEREO ] = "NICAM_AUTO_STEREO", - [ EN_FMRADIO_FORCE_MONO ] = "FMRADIO_FORCE_MONO", - [ EN_FMRADIO_FORCE_STEREO ] = "FMRADIO_FORCE_STEREO", - [ EN_FMRADIO_AUTO_STEREO ] = "FMRADIO_AUTO_STEREO", +static char *aud_ctl_names[64] = { + [EN_BTSC_FORCE_MONO] = "BTSC_FORCE_MONO", + [EN_BTSC_FORCE_STEREO] = "BTSC_FORCE_STEREO", + [EN_BTSC_FORCE_SAP] = "BTSC_FORCE_SAP", + [EN_BTSC_AUTO_STEREO] = "BTSC_AUTO_STEREO", + [EN_BTSC_AUTO_SAP] = "BTSC_AUTO_SAP", + [EN_A2_FORCE_MONO1] = "A2_FORCE_MONO1", + [EN_A2_FORCE_MONO2] = "A2_FORCE_MONO2", + [EN_A2_FORCE_STEREO] = "A2_FORCE_STEREO", + [EN_A2_AUTO_MONO2] = "A2_AUTO_MONO2", + [EN_A2_AUTO_STEREO] = "A2_AUTO_STEREO", + [EN_EIAJ_FORCE_MONO1] = "EIAJ_FORCE_MONO1", + [EN_EIAJ_FORCE_MONO2] = "EIAJ_FORCE_MONO2", + [EN_EIAJ_FORCE_STEREO] = "EIAJ_FORCE_STEREO", + [EN_EIAJ_AUTO_MONO2] = "EIAJ_AUTO_MONO2", + [EN_EIAJ_AUTO_STEREO] = "EIAJ_AUTO_STEREO", + [EN_NICAM_FORCE_MONO1] = "NICAM_FORCE_MONO1", + [EN_NICAM_FORCE_MONO2] = "NICAM_FORCE_MONO2", + [EN_NICAM_FORCE_STEREO] = "NICAM_FORCE_STEREO", + [EN_NICAM_AUTO_MONO2] = "NICAM_AUTO_MONO2", + [EN_NICAM_AUTO_STEREO] = "NICAM_AUTO_STEREO", + [EN_FMRADIO_FORCE_MONO] = "FMRADIO_FORCE_MONO", + [EN_FMRADIO_FORCE_STEREO] = "FMRADIO_FORCE_STEREO", + [EN_FMRADIO_AUTO_STEREO] = "FMRADIO_AUTO_STEREO", }; struct rlist { @@ -97,8 +96,7 @@ struct rlist { u32 val; }; -static void set_audio_registers(struct cx88_core *core, - const struct rlist *l) +static void set_audio_registers(struct cx88_core *core, const struct rlist *l) { int i; @@ -119,17 +117,18 @@ static void set_audio_registers(struct cx88_core *core, } } -static void set_audio_start(struct cx88_core *core, - u32 mode) +static void set_audio_start(struct cx88_core *core, u32 mode) { // mute - cx_write(AUD_VOL_CTL, (1 << 6)); + cx_write(AUD_VOL_CTL, (1 << 6)); // start programming - cx_write(AUD_CTL, 0x0000); - cx_write(AUD_INIT, mode); - cx_write(AUD_INIT_LD, 0x0001); - cx_write(AUD_SOFT_RESET, 0x0001); + cx_write(MO_AUD_DMACNTRL, 0x0000); + msleep(100); + //cx_write(AUD_CTL, 0x0000); + cx_write(AUD_INIT, mode); + cx_write(AUD_INIT_LD, 0x0001); + cx_write(AUD_SOFT_RESET, 0x0001); } static void set_audio_finish(struct cx88_core *core, u32 ctl) @@ -148,12 +147,13 @@ static void set_audio_finish(struct cx88_core *core, u32 ctl) cx_write(AUD_I2SCNTL, 0); //cx_write(AUD_APB_IN_RATE_ADJ, 0); } else { - ctl |= EN_DAC_ENABLE; - cx_write(AUD_CTL, ctl); + ctl |= EN_DAC_ENABLE; + cx_write(AUD_CTL, ctl); } /* finish programming */ cx_write(AUD_SOFT_RESET, 0x0000); + cx_write(MO_AUD_DMACNTRL, 0x0003); /* unmute */ volume = cx_sread(SHADOW_AUD_VOL_CTL); @@ -162,486 +162,463 @@ static void set_audio_finish(struct cx88_core *core, u32 ctl) /* ----------------------------------------------------------- */ -static void set_audio_standard_BTSC(struct cx88_core *core, unsigned int sap, u32 mode) +static void set_audio_standard_BTSC(struct cx88_core *core, unsigned int sap, + u32 mode) { static const struct rlist btsc[] = { - { AUD_AFE_12DB_EN, 0x00000001 }, - { AUD_OUT1_SEL, 0x00000013 }, - { AUD_OUT1_SHIFT, 0x00000000 }, - { AUD_POLY0_DDS_CONSTANT, 0x0012010c }, - { AUD_DMD_RA_DDS, 0x00c3e7aa }, - { AUD_DBX_IN_GAIN, 0x00004734 }, - { AUD_DBX_WBE_GAIN, 0x00004640 }, - { AUD_DBX_SE_GAIN, 0x00008d31 }, - { AUD_DCOC_0_SRC, 0x0000001a }, - { AUD_IIR1_4_SEL, 0x00000021 }, - { AUD_DCOC_PASS_IN, 0x00000003 }, - { AUD_DCOC_0_SHIFT_IN0, 0x0000000a }, - { AUD_DCOC_0_SHIFT_IN1, 0x00000008 }, - { AUD_DCOC_1_SHIFT_IN0, 0x0000000a }, - { AUD_DCOC_1_SHIFT_IN1, 0x00000008 }, - { AUD_DN0_FREQ, 0x0000283b }, - { AUD_DN2_SRC_SEL, 0x00000008 }, - { AUD_DN2_FREQ, 0x00003000 }, - { AUD_DN2_AFC, 0x00000002 }, - { AUD_DN2_SHFT, 0x00000000 }, - { AUD_IIR2_2_SEL, 0x00000020 }, - { AUD_IIR2_2_SHIFT, 0x00000000 }, - { AUD_IIR2_3_SEL, 0x0000001f }, - { AUD_IIR2_3_SHIFT, 0x00000000 }, - { AUD_CRDC1_SRC_SEL, 0x000003ce }, - { AUD_CRDC1_SHIFT, 0x00000000 }, - { AUD_CORDIC_SHIFT_1, 0x00000007 }, - { AUD_DCOC_1_SRC, 0x0000001b }, - { AUD_DCOC1_SHIFT, 0x00000000 }, - { AUD_RDSI_SEL, 0x00000008 }, - { AUD_RDSQ_SEL, 0x00000008 }, - { AUD_RDSI_SHIFT, 0x00000000 }, - { AUD_RDSQ_SHIFT, 0x00000000 }, - { AUD_POLYPH80SCALEFAC, 0x00000003 }, + {AUD_AFE_12DB_EN, 0x00000001}, + {AUD_OUT1_SEL, 0x00000013}, + {AUD_OUT1_SHIFT, 0x00000000}, + {AUD_POLY0_DDS_CONSTANT, 0x0012010c}, + {AUD_DMD_RA_DDS, 0x00c3e7aa}, + {AUD_DBX_IN_GAIN, 0x00004734}, + {AUD_DBX_WBE_GAIN, 0x00004640}, + {AUD_DBX_SE_GAIN, 0x00008d31}, + {AUD_DCOC_0_SRC, 0x0000001a}, + {AUD_IIR1_4_SEL, 0x00000021}, + {AUD_DCOC_PASS_IN, 0x00000003}, + {AUD_DCOC_0_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_0_SHIFT_IN1, 0x00000008}, + {AUD_DCOC_1_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_1_SHIFT_IN1, 0x00000008}, + {AUD_DN0_FREQ, 0x0000283b}, + {AUD_DN2_SRC_SEL, 0x00000008}, + {AUD_DN2_FREQ, 0x00003000}, + {AUD_DN2_AFC, 0x00000002}, + {AUD_DN2_SHFT, 0x00000000}, + {AUD_IIR2_2_SEL, 0x00000020}, + {AUD_IIR2_2_SHIFT, 0x00000000}, + {AUD_IIR2_3_SEL, 0x0000001f}, + {AUD_IIR2_3_SHIFT, 0x00000000}, + {AUD_CRDC1_SRC_SEL, 0x000003ce}, + {AUD_CRDC1_SHIFT, 0x00000000}, + {AUD_CORDIC_SHIFT_1, 0x00000007}, + {AUD_DCOC_1_SRC, 0x0000001b}, + {AUD_DCOC1_SHIFT, 0x00000000}, + {AUD_RDSI_SEL, 0x00000008}, + {AUD_RDSQ_SEL, 0x00000008}, + {AUD_RDSI_SHIFT, 0x00000000}, + {AUD_RDSQ_SHIFT, 0x00000000}, + {AUD_POLYPH80SCALEFAC, 0x00000003}, { /* end of list */ }, }; static const struct rlist btsc_sap[] = { - { AUD_AFE_12DB_EN, 0x00000001 }, - { AUD_DBX_IN_GAIN, 0x00007200 }, - { AUD_DBX_WBE_GAIN, 0x00006200 }, - { AUD_DBX_SE_GAIN, 0x00006200 }, - { AUD_IIR1_1_SEL, 0x00000000 }, - { AUD_IIR1_3_SEL, 0x00000001 }, - { AUD_DN1_SRC_SEL, 0x00000007 }, - { AUD_IIR1_4_SHIFT, 0x00000006 }, - { AUD_IIR2_1_SHIFT, 0x00000000 }, - { AUD_IIR2_2_SHIFT, 0x00000000 }, - { AUD_IIR3_0_SHIFT, 0x00000000 }, - { AUD_IIR3_1_SHIFT, 0x00000000 }, - { AUD_IIR3_0_SEL, 0x0000000d }, - { AUD_IIR3_1_SEL, 0x0000000e }, - { AUD_DEEMPH1_SRC_SEL, 0x00000014 }, - { AUD_DEEMPH1_SHIFT, 0x00000000 }, - { AUD_DEEMPH1_G0, 0x00004000 }, - { AUD_DEEMPH1_A0, 0x00000000 }, - { AUD_DEEMPH1_B0, 0x00000000 }, - { AUD_DEEMPH1_A1, 0x00000000 }, - { AUD_DEEMPH1_B1, 0x00000000 }, - { AUD_OUT0_SEL, 0x0000003f }, - { AUD_OUT1_SEL, 0x0000003f }, - { AUD_DN1_AFC, 0x00000002 }, - { AUD_DCOC_0_SHIFT_IN0, 0x0000000a }, - { AUD_DCOC_0_SHIFT_IN1, 0x00000008 }, - { AUD_DCOC_1_SHIFT_IN0, 0x0000000a }, - { AUD_DCOC_1_SHIFT_IN1, 0x00000008 }, - { AUD_IIR1_0_SEL, 0x0000001d }, - { AUD_IIR1_2_SEL, 0x0000001e }, - { AUD_IIR2_1_SEL, 0x00000002 }, - { AUD_IIR2_2_SEL, 0x00000004 }, - { AUD_IIR3_2_SEL, 0x0000000f }, - { AUD_DCOC2_SHIFT, 0x00000001 }, - { AUD_IIR3_2_SHIFT, 0x00000001 }, - { AUD_DEEMPH0_SRC_SEL, 0x00000014 }, - { AUD_CORDIC_SHIFT_1, 0x00000006 }, - { AUD_POLY0_DDS_CONSTANT, 0x000e4db2 }, - { AUD_DMD_RA_DDS, 0x00f696e6 }, - { AUD_IIR2_3_SEL, 0x00000025 }, - { AUD_IIR1_4_SEL, 0x00000021 }, - { AUD_DN1_FREQ, 0x0000c965 }, - { AUD_DCOC_PASS_IN, 0x00000003 }, - { AUD_DCOC_0_SRC, 0x0000001a }, - { AUD_DCOC_1_SRC, 0x0000001b }, - { AUD_DCOC1_SHIFT, 0x00000000 }, - { AUD_RDSI_SEL, 0x00000009 }, - { AUD_RDSQ_SEL, 0x00000009 }, - { AUD_RDSI_SHIFT, 0x00000000 }, - { AUD_RDSQ_SHIFT, 0x00000000 }, - { AUD_POLYPH80SCALEFAC, 0x00000003 }, + {AUD_AFE_12DB_EN, 0x00000001}, + {AUD_DBX_IN_GAIN, 0x00007200}, + {AUD_DBX_WBE_GAIN, 0x00006200}, + {AUD_DBX_SE_GAIN, 0x00006200}, + {AUD_IIR1_1_SEL, 0x00000000}, + {AUD_IIR1_3_SEL, 0x00000001}, + {AUD_DN1_SRC_SEL, 0x00000007}, + {AUD_IIR1_4_SHIFT, 0x00000006}, + {AUD_IIR2_1_SHIFT, 0x00000000}, + {AUD_IIR2_2_SHIFT, 0x00000000}, + {AUD_IIR3_0_SHIFT, 0x00000000}, + {AUD_IIR3_1_SHIFT, 0x00000000}, + {AUD_IIR3_0_SEL, 0x0000000d}, + {AUD_IIR3_1_SEL, 0x0000000e}, + {AUD_DEEMPH1_SRC_SEL, 0x00000014}, + {AUD_DEEMPH1_SHIFT, 0x00000000}, + {AUD_DEEMPH1_G0, 0x00004000}, + {AUD_DEEMPH1_A0, 0x00000000}, + {AUD_DEEMPH1_B0, 0x00000000}, + {AUD_DEEMPH1_A1, 0x00000000}, + {AUD_DEEMPH1_B1, 0x00000000}, + {AUD_OUT0_SEL, 0x0000003f}, + {AUD_OUT1_SEL, 0x0000003f}, + {AUD_DN1_AFC, 0x00000002}, + {AUD_DCOC_0_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_0_SHIFT_IN1, 0x00000008}, + {AUD_DCOC_1_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_1_SHIFT_IN1, 0x00000008}, + {AUD_IIR1_0_SEL, 0x0000001d}, + {AUD_IIR1_2_SEL, 0x0000001e}, + {AUD_IIR2_1_SEL, 0x00000002}, + {AUD_IIR2_2_SEL, 0x00000004}, + {AUD_IIR3_2_SEL, 0x0000000f}, + {AUD_DCOC2_SHIFT, 0x00000001}, + {AUD_IIR3_2_SHIFT, 0x00000001}, + {AUD_DEEMPH0_SRC_SEL, 0x00000014}, + {AUD_CORDIC_SHIFT_1, 0x00000006}, + {AUD_POLY0_DDS_CONSTANT, 0x000e4db2}, + {AUD_DMD_RA_DDS, 0x00f696e6}, + {AUD_IIR2_3_SEL, 0x00000025}, + {AUD_IIR1_4_SEL, 0x00000021}, + {AUD_DN1_FREQ, 0x0000c965}, + {AUD_DCOC_PASS_IN, 0x00000003}, + {AUD_DCOC_0_SRC, 0x0000001a}, + {AUD_DCOC_1_SRC, 0x0000001b}, + {AUD_DCOC1_SHIFT, 0x00000000}, + {AUD_RDSI_SEL, 0x00000009}, + {AUD_RDSQ_SEL, 0x00000009}, + {AUD_RDSI_SHIFT, 0x00000000}, + {AUD_RDSQ_SHIFT, 0x00000000}, + {AUD_POLYPH80SCALEFAC, 0x00000003}, { /* end of list */ }, }; mode |= EN_FMRADIO_EN_RDS; if (sap) { - dprintk("%s SAP (status: unknown)\n",__FUNCTION__); - set_audio_start(core, SEL_SAP); + dprintk("%s SAP (status: unknown)\n", __FUNCTION__); + set_audio_start(core, SEL_SAP); set_audio_registers(core, btsc_sap); set_audio_finish(core, mode); } else { - dprintk("%s (status: known-good)\n",__FUNCTION__); - set_audio_start(core, SEL_BTSC); + dprintk("%s (status: known-good)\n", __FUNCTION__); + set_audio_start(core, SEL_BTSC); set_audio_registers(core, btsc); set_audio_finish(core, mode); } } - -static void set_audio_standard_NICAM_L(struct cx88_core *core, int stereo) +static void set_audio_standard_NICAM(struct cx88_core *core, u32 mode) { - /* This is probably weird.. - * Let's operate and find out. */ - - static const struct rlist nicam_l_mono[] = { - { AUD_ERRLOGPERIOD_R, 0x00000064 }, - { AUD_ERRINTRPTTHSHLD1_R, 0x00000FFF }, - { AUD_ERRINTRPTTHSHLD2_R, 0x0000001F }, - { AUD_ERRINTRPTTHSHLD3_R, 0x0000000F }, - - { AUD_PDF_DDS_CNST_BYTE2, 0x48 }, - { AUD_PDF_DDS_CNST_BYTE1, 0x3D }, - { AUD_QAM_MODE, 0x00 }, - { AUD_PDF_DDS_CNST_BYTE0, 0xf5 }, - { AUD_PHACC_FREQ_8MSB, 0x3a }, - { AUD_PHACC_FREQ_8LSB, 0x4a }, - - { AUD_DEEMPHGAIN_R, 0x6680 }, - { AUD_DEEMPHNUMER1_R, 0x353DE }, - { AUD_DEEMPHNUMER2_R, 0x1B1 }, - { AUD_DEEMPHDENOM1_R, 0x0F3D0 }, - { AUD_DEEMPHDENOM2_R, 0x0 }, - { AUD_FM_MODE_ENABLE, 0x7 }, - { AUD_POLYPH80SCALEFAC, 0x3 }, - { AUD_AFE_12DB_EN, 0x1 }, - { AAGC_GAIN, 0x0 }, - { AAGC_HYST, 0x18 }, - { AAGC_DEF, 0x20 }, - { AUD_DN0_FREQ, 0x0 }, - { AUD_POLY0_DDS_CONSTANT, 0x0E4DB2 }, - { AUD_DCOC_0_SRC, 0x21 }, - { AUD_IIR1_0_SEL, 0x0 }, - { AUD_IIR1_0_SHIFT, 0x7 }, - { AUD_IIR1_1_SEL, 0x2 }, - { AUD_IIR1_1_SHIFT, 0x0 }, - { AUD_DCOC_1_SRC, 0x3 }, - { AUD_DCOC1_SHIFT, 0x0 }, - { AUD_DCOC_PASS_IN, 0x0 }, - { AUD_IIR1_2_SEL, 0x23 }, - { AUD_IIR1_2_SHIFT, 0x0 }, - { AUD_IIR1_3_SEL, 0x4 }, - { AUD_IIR1_3_SHIFT, 0x7 }, - { AUD_IIR1_4_SEL, 0x5 }, - { AUD_IIR1_4_SHIFT, 0x7 }, - { AUD_IIR3_0_SEL, 0x7 }, - { AUD_IIR3_0_SHIFT, 0x0 }, - { AUD_DEEMPH0_SRC_SEL, 0x11 }, - { AUD_DEEMPH0_SHIFT, 0x0 }, - { AUD_DEEMPH0_G0, 0x7000 }, - { AUD_DEEMPH0_A0, 0x0 }, - { AUD_DEEMPH0_B0, 0x0 }, - { AUD_DEEMPH0_A1, 0x0 }, - { AUD_DEEMPH0_B1, 0x0 }, - { AUD_DEEMPH1_SRC_SEL, 0x11 }, - { AUD_DEEMPH1_SHIFT, 0x0 }, - { AUD_DEEMPH1_G0, 0x7000 }, - { AUD_DEEMPH1_A0, 0x0 }, - { AUD_DEEMPH1_B0, 0x0 }, - { AUD_DEEMPH1_A1, 0x0 }, - { AUD_DEEMPH1_B1, 0x0 }, - { AUD_OUT0_SEL, 0x3F }, - { AUD_OUT1_SEL, 0x3F }, - { AUD_DMD_RA_DDS, 0x0F5C285 }, - { AUD_PLL_INT, 0x1E }, - { AUD_PLL_DDS, 0x0 }, - { AUD_PLL_FRAC, 0x0E542 }, - - // setup QAM registers - { AUD_RATE_ADJ1, 0x00000100 }, - { AUD_RATE_ADJ2, 0x00000200 }, - { AUD_RATE_ADJ3, 0x00000300 }, - { AUD_RATE_ADJ4, 0x00000400 }, - { AUD_RATE_ADJ5, 0x00000500 }, - { AUD_RATE_THRES_DMD, 0x000000C0 }, + static const struct rlist nicam_l[] = { + {AUD_AFE_12DB_EN, 0x00000001}, + {AUD_RATE_ADJ1, 0x00000060}, + {AUD_RATE_ADJ2, 0x000000F9}, + {AUD_RATE_ADJ3, 0x000001CC}, + {AUD_RATE_ADJ4, 0x000002B3}, + {AUD_RATE_ADJ5, 0x00000726}, + {AUD_DEEMPHDENOM1_R, 0x0000F3D0}, + {AUD_DEEMPHDENOM2_R, 0x00000000}, + {AUD_ERRLOGPERIOD_R, 0x00000064}, + {AUD_ERRINTRPTTHSHLD1_R, 0x00000FFF}, + {AUD_ERRINTRPTTHSHLD2_R, 0x0000001F}, + {AUD_ERRINTRPTTHSHLD3_R, 0x0000000F}, + {AUD_POLYPH80SCALEFAC, 0x00000003}, + {AUD_DMD_RA_DDS, 0x00C00000}, + {AUD_PLL_INT, 0x0000001E}, + {AUD_PLL_DDS, 0x00000000}, + {AUD_PLL_FRAC, 0x0000E542}, + {AUD_START_TIMER, 0x00000000}, + {AUD_DEEMPHNUMER1_R, 0x000353DE}, + {AUD_DEEMPHNUMER2_R, 0x000001B1}, + {AUD_PDF_DDS_CNST_BYTE2, 0x06}, + {AUD_PDF_DDS_CNST_BYTE1, 0x82}, + {AUD_PDF_DDS_CNST_BYTE0, 0x12}, + {AUD_QAM_MODE, 0x05}, + {AUD_PHACC_FREQ_8MSB, 0x34}, + {AUD_PHACC_FREQ_8LSB, 0x4C}, + {AUD_DEEMPHGAIN_R, 0x00006680}, + {AUD_RATE_THRES_DMD, 0x000000C0}, { /* end of list */ }, }; - static const struct rlist nicam_l[] = { - // setup QAM registers - { AUD_RATE_ADJ1, 0x00000060 }, - { AUD_RATE_ADJ2, 0x000000F9 }, - { AUD_RATE_ADJ3, 0x000001CC }, - { AUD_RATE_ADJ4, 0x000002B3 }, - { AUD_RATE_ADJ5, 0x00000726 }, - { AUD_DEEMPHDENOM1_R, 0x0000F3D0 }, - { AUD_DEEMPHDENOM2_R, 0x00000000 }, - { AUD_ERRLOGPERIOD_R, 0x00000064 }, - { AUD_ERRINTRPTTHSHLD1_R, 0x00000FFF }, - { AUD_ERRINTRPTTHSHLD2_R, 0x0000001F }, - { AUD_ERRINTRPTTHSHLD3_R, 0x0000000F }, - { AUD_POLYPH80SCALEFAC, 0x00000003 }, - { AUD_DMD_RA_DDS, 0x00C00000 }, - { AUD_PLL_INT, 0x0000001E }, - { AUD_PLL_DDS, 0x00000000 }, - { AUD_PLL_FRAC, 0x0000E542 }, - { AUD_START_TIMER, 0x00000000 }, - { AUD_DEEMPHNUMER1_R, 0x000353DE }, - { AUD_DEEMPHNUMER2_R, 0x000001B1 }, - { AUD_PDF_DDS_CNST_BYTE2, 0x06 }, - { AUD_PDF_DDS_CNST_BYTE1, 0x82 }, - { AUD_QAM_MODE, 0x05 }, - { AUD_PDF_DDS_CNST_BYTE0, 0x12 }, - { AUD_PHACC_FREQ_8MSB, 0x34 }, - { AUD_PHACC_FREQ_8LSB, 0x4C }, - { AUD_DEEMPHGAIN_R, 0x00006680 }, - { AUD_RATE_THRES_DMD, 0x000000C0 }, + static const struct rlist nicam_bgdki_common[] = { + {AUD_AFE_12DB_EN, 0x00000001}, + {AUD_RATE_ADJ1, 0x00000010}, + {AUD_RATE_ADJ2, 0x00000040}, + {AUD_RATE_ADJ3, 0x00000100}, + {AUD_RATE_ADJ4, 0x00000400}, + {AUD_RATE_ADJ5, 0x00001000}, + //{ AUD_DMD_RA_DDS, 0x00c0d5ce }, + {AUD_ERRLOGPERIOD_R, 0x00000fff}, + {AUD_ERRINTRPTTHSHLD1_R, 0x000003ff}, + {AUD_ERRINTRPTTHSHLD2_R, 0x000000ff}, + {AUD_ERRINTRPTTHSHLD3_R, 0x0000003f}, + {AUD_POLYPH80SCALEFAC, 0x00000003}, + {AUD_DEEMPHGAIN_R, 0x000023c2}, + {AUD_DEEMPHNUMER1_R, 0x0002a7bc}, + {AUD_DEEMPHNUMER2_R, 0x0003023e}, + {AUD_DEEMPHDENOM1_R, 0x0000f3d0}, + {AUD_DEEMPHDENOM2_R, 0x00000000}, + {AUD_PDF_DDS_CNST_BYTE2, 0x06}, + {AUD_PDF_DDS_CNST_BYTE1, 0x82}, + {AUD_QAM_MODE, 0x05}, { /* end of list */ }, - } ; - dprintk("%s (status: devel), stereo : %d\n",__FUNCTION__,stereo); - - if (!stereo) { - /* AM Mono */ - set_audio_start(core, SEL_A2); - set_audio_registers(core, nicam_l_mono); - set_audio_finish(core, EN_A2_FORCE_MONO1); - } else { - /* Nicam Stereo */ - set_audio_start(core, SEL_NICAM); - set_audio_registers(core, nicam_l); - set_audio_finish(core, 0x1924); /* FIXME */ - } -} + }; -static void set_audio_standard_PAL_I(struct cx88_core *core, int stereo) -{ - static const struct rlist pal_i_fm_mono[] = { - {AUD_ERRLOGPERIOD_R, 0x00000064}, - {AUD_ERRINTRPTTHSHLD1_R, 0x00000fff}, - {AUD_ERRINTRPTTHSHLD2_R, 0x0000001f}, - {AUD_ERRINTRPTTHSHLD3_R, 0x0000000f}, - {AUD_PDF_DDS_CNST_BYTE2, 0x06}, - {AUD_PDF_DDS_CNST_BYTE1, 0x82}, - {AUD_PDF_DDS_CNST_BYTE0, 0x12}, - {AUD_QAM_MODE, 0x05}, - {AUD_PHACC_FREQ_8MSB, 0x3a}, - {AUD_PHACC_FREQ_8LSB, 0x93}, - {AUD_DMD_RA_DDS, 0x002a4f2f}, - {AUD_PLL_INT, 0x0000001e}, - {AUD_PLL_DDS, 0x00000004}, - {AUD_PLL_FRAC, 0x0000e542}, - {AUD_RATE_ADJ1, 0x00000100}, - {AUD_RATE_ADJ2, 0x00000200}, - {AUD_RATE_ADJ3, 0x00000300}, - {AUD_RATE_ADJ4, 0x00000400}, - {AUD_RATE_ADJ5, 0x00000500}, - {AUD_THR_FR, 0x00000000}, - {AUD_PILOT_BQD_1_K0, 0x0000755b}, - {AUD_PILOT_BQD_1_K1, 0x00551340}, - {AUD_PILOT_BQD_1_K2, 0x006d30be}, - {AUD_PILOT_BQD_1_K3, 0xffd394af}, - {AUD_PILOT_BQD_1_K4, 0x00400000}, - {AUD_PILOT_BQD_2_K0, 0x00040000}, - {AUD_PILOT_BQD_2_K1, 0x002a4841}, - {AUD_PILOT_BQD_2_K2, 0x00400000}, - {AUD_PILOT_BQD_2_K3, 0x00000000}, - {AUD_PILOT_BQD_2_K4, 0x00000000}, - {AUD_MODE_CHG_TIMER, 0x00000060}, - {AUD_AFE_12DB_EN, 0x00000001}, - {AAGC_HYST, 0x0000000a}, - {AUD_CORDIC_SHIFT_0, 0x00000007}, - {AUD_CORDIC_SHIFT_1, 0x00000007}, - {AUD_C1_UP_THR, 0x00007000}, - {AUD_C1_LO_THR, 0x00005400}, - {AUD_C2_UP_THR, 0x00005400}, - {AUD_C2_LO_THR, 0x00003000}, - {AUD_DCOC_0_SRC, 0x0000001a}, - {AUD_DCOC0_SHIFT, 0x00000000}, - {AUD_DCOC_0_SHIFT_IN0, 0x0000000a}, - {AUD_DCOC_0_SHIFT_IN1, 0x00000008}, - {AUD_DCOC_PASS_IN, 0x00000003}, - {AUD_IIR3_0_SEL, 0x00000021}, - {AUD_DN2_AFC, 0x00000002}, - {AUD_DCOC_1_SRC, 0x0000001b}, - {AUD_DCOC1_SHIFT, 0x00000000}, - {AUD_DCOC_1_SHIFT_IN0, 0x0000000a}, - {AUD_DCOC_1_SHIFT_IN1, 0x00000008}, - {AUD_IIR3_1_SEL, 0x00000023}, - {AUD_DN0_FREQ, 0x000035a3}, - {AUD_DN2_FREQ, 0x000029c7}, - {AUD_CRDC0_SRC_SEL, 0x00000511}, - {AUD_IIR1_0_SEL, 0x00000001}, - {AUD_IIR1_1_SEL, 0x00000000}, - {AUD_IIR3_2_SEL, 0x00000003}, - {AUD_IIR3_2_SHIFT, 0x00000000}, - {AUD_IIR3_0_SEL, 0x00000002}, - {AUD_IIR2_0_SEL, 0x00000021}, - {AUD_IIR2_0_SHIFT, 0x00000002}, - {AUD_DEEMPH0_SRC_SEL, 0x0000000b}, - {AUD_DEEMPH1_SRC_SEL, 0x0000000b}, - {AUD_POLYPH80SCALEFAC, 0x00000001}, - {AUD_START_TIMER, 0x00000000}, - { /* end of list */ }, - }; - - static const struct rlist pal_i_nicam[] = { - { AUD_RATE_ADJ1, 0x00000010 }, - { AUD_RATE_ADJ2, 0x00000040 }, - { AUD_RATE_ADJ3, 0x00000100 }, - { AUD_RATE_ADJ4, 0x00000400 }, - { AUD_RATE_ADJ5, 0x00001000 }, - // { AUD_DMD_RA_DDS, 0x00c0d5ce }, - { AUD_DEEMPHGAIN_R, 0x000023c2 }, - { AUD_DEEMPHNUMER1_R, 0x0002a7bc }, - { AUD_DEEMPHNUMER2_R, 0x0003023e }, - { AUD_DEEMPHDENOM1_R, 0x0000f3d0 }, - { AUD_DEEMPHDENOM2_R, 0x00000000 }, - { AUD_DEEMPHDENOM2_R, 0x00000000 }, - { AUD_ERRLOGPERIOD_R, 0x00000fff }, - { AUD_ERRINTRPTTHSHLD1_R, 0x000003ff }, - { AUD_ERRINTRPTTHSHLD2_R, 0x000000ff }, - { AUD_ERRINTRPTTHSHLD3_R, 0x0000003f }, - { AUD_POLYPH80SCALEFAC, 0x00000003 }, - { AUD_PDF_DDS_CNST_BYTE2, 0x06 }, - { AUD_PDF_DDS_CNST_BYTE1, 0x82 }, - { AUD_PDF_DDS_CNST_BYTE0, 0x16 }, - { AUD_QAM_MODE, 0x05 }, - { AUD_PDF_DDS_CNST_BYTE0, 0x12 }, - { AUD_PHACC_FREQ_8MSB, 0x3a }, - { AUD_PHACC_FREQ_8LSB, 0x93 }, - { /* end of list */ }, + static const struct rlist nicam_i[] = { + {AUD_PDF_DDS_CNST_BYTE0, 0x12}, + {AUD_PHACC_FREQ_8MSB, 0x3a}, + {AUD_PHACC_FREQ_8LSB, 0x93}, + { /* end of list */ }, }; - dprintk("%s (status: devel), stereo : %d\n",__FUNCTION__,stereo); + static const struct rlist nicam_default[] = { + {AUD_PDF_DDS_CNST_BYTE0, 0x16}, + {AUD_PHACC_FREQ_8MSB, 0x34}, + {AUD_PHACC_FREQ_8LSB, 0x4c}, + { /* end of list */ }, + }; - if (!stereo) { - /* FM Mono */ - set_audio_start(core, SEL_A2); - set_audio_registers(core, pal_i_fm_mono); - set_audio_finish(core, EN_DMTRX_SUMDIFF | EN_A2_FORCE_MONO1); - } else { - /* Nicam Stereo */ - set_audio_start(core, SEL_NICAM); - set_audio_registers(core, pal_i_nicam); - set_audio_finish(core, EN_DMTRX_LR | EN_DMTRX_BYPASS | EN_NICAM_AUTO_STEREO); - } + set_audio_start(core,SEL_NICAM); + switch (core->tvaudio) { + case WW_L: + dprintk("%s SECAM-L NICAM (status: devel)\n", __FUNCTION__); + set_audio_registers(core, nicam_l); + break; + case WW_I: + dprintk("%s PAL-I NICAM (status: devel)\n", __FUNCTION__); + set_audio_registers(core, nicam_bgdki_common); + set_audio_registers(core, nicam_i); + break; + default: + dprintk("%s PAL-BGDK NICAM (status: unknown)\n", __FUNCTION__); + set_audio_registers(core, nicam_bgdki_common); + set_audio_registers(core, nicam_default); + break; + }; + + mode |= EN_DMTRX_LR | EN_DMTRX_BYPASS; + set_audio_finish(core, mode); } static void set_audio_standard_A2(struct cx88_core *core, u32 mode) { - static const struct rlist a2_common[] = { - {AUD_ERRLOGPERIOD_R, 0x00000064}, - {AUD_ERRINTRPTTHSHLD1_R, 0x00000fff}, - {AUD_ERRINTRPTTHSHLD2_R, 0x0000001f}, - {AUD_ERRINTRPTTHSHLD3_R, 0x0000000f}, - {AUD_PDF_DDS_CNST_BYTE2, 0x06}, - {AUD_PDF_DDS_CNST_BYTE1, 0x82}, - {AUD_PDF_DDS_CNST_BYTE0, 0x12}, - {AUD_QAM_MODE, 0x05}, - {AUD_PHACC_FREQ_8MSB, 0x34}, - {AUD_PHACC_FREQ_8LSB, 0x4c}, - {AUD_RATE_ADJ1, 0x00000100}, - {AUD_RATE_ADJ2, 0x00000200}, - {AUD_RATE_ADJ3, 0x00000300}, - {AUD_RATE_ADJ4, 0x00000400}, - {AUD_RATE_ADJ5, 0x00000500}, - {AUD_THR_FR, 0x00000000}, - {AAGC_HYST, 0x0000001a}, - {AUD_PILOT_BQD_1_K0, 0x0000755b}, - {AUD_PILOT_BQD_1_K1, 0x00551340}, - {AUD_PILOT_BQD_1_K2, 0x006d30be}, - {AUD_PILOT_BQD_1_K3, 0xffd394af}, - {AUD_PILOT_BQD_1_K4, 0x00400000}, - {AUD_PILOT_BQD_2_K0, 0x00040000}, - {AUD_PILOT_BQD_2_K1, 0x002a4841}, - {AUD_PILOT_BQD_2_K2, 0x00400000}, - {AUD_PILOT_BQD_2_K3, 0x00000000}, - {AUD_PILOT_BQD_2_K4, 0x00000000}, - {AUD_MODE_CHG_TIMER, 0x00000040}, - {AUD_AFE_12DB_EN, 0x00000001}, - {AUD_CORDIC_SHIFT_0, 0x00000007}, - {AUD_CORDIC_SHIFT_1, 0x00000007}, - {AUD_DEEMPH0_G0, 0x00000380}, - {AUD_DEEMPH1_G0, 0x00000380}, - {AUD_DCOC_0_SRC, 0x0000001a}, - {AUD_DCOC0_SHIFT, 0x00000000}, - {AUD_DCOC_0_SHIFT_IN0, 0x0000000a}, - {AUD_DCOC_0_SHIFT_IN1, 0x00000008}, - {AUD_DCOC_PASS_IN, 0x00000003}, - {AUD_IIR3_0_SEL, 0x00000021}, - {AUD_DN2_AFC, 0x00000002}, - {AUD_DCOC_1_SRC, 0x0000001b}, - {AUD_DCOC1_SHIFT, 0x00000000}, - {AUD_DCOC_1_SHIFT_IN0, 0x0000000a}, - {AUD_DCOC_1_SHIFT_IN1, 0x00000008}, - {AUD_IIR3_1_SEL, 0x00000023}, - {AUD_RDSI_SEL, 0x00000017}, - {AUD_RDSI_SHIFT, 0x00000000}, - {AUD_RDSQ_SEL, 0x00000017}, - {AUD_RDSQ_SHIFT, 0x00000000}, - {AUD_PLL_INT, 0x0000001e}, - {AUD_PLL_DDS, 0x00000000}, - {AUD_PLL_FRAC, 0x0000e542}, - {AUD_POLYPH80SCALEFAC, 0x00000001}, - {AUD_START_TIMER, 0x00000000}, - { /* end of list */ }, + static const struct rlist a2_bgdk_common[] = { + {AUD_ERRLOGPERIOD_R, 0x00000064}, + {AUD_ERRINTRPTTHSHLD1_R, 0x00000fff}, + {AUD_ERRINTRPTTHSHLD2_R, 0x0000001f}, + {AUD_ERRINTRPTTHSHLD3_R, 0x0000000f}, + {AUD_PDF_DDS_CNST_BYTE2, 0x06}, + {AUD_PDF_DDS_CNST_BYTE1, 0x82}, + {AUD_PDF_DDS_CNST_BYTE0, 0x12}, + {AUD_QAM_MODE, 0x05}, + {AUD_PHACC_FREQ_8MSB, 0x34}, + {AUD_PHACC_FREQ_8LSB, 0x4c}, + {AUD_RATE_ADJ1, 0x00000100}, + {AUD_RATE_ADJ2, 0x00000200}, + {AUD_RATE_ADJ3, 0x00000300}, + {AUD_RATE_ADJ4, 0x00000400}, + {AUD_RATE_ADJ5, 0x00000500}, + {AUD_THR_FR, 0x00000000}, + {AAGC_HYST, 0x0000001a}, + {AUD_PILOT_BQD_1_K0, 0x0000755b}, + {AUD_PILOT_BQD_1_K1, 0x00551340}, + {AUD_PILOT_BQD_1_K2, 0x006d30be}, + {AUD_PILOT_BQD_1_K3, 0xffd394af}, + {AUD_PILOT_BQD_1_K4, 0x00400000}, + {AUD_PILOT_BQD_2_K0, 0x00040000}, + {AUD_PILOT_BQD_2_K1, 0x002a4841}, + {AUD_PILOT_BQD_2_K2, 0x00400000}, + {AUD_PILOT_BQD_2_K3, 0x00000000}, + {AUD_PILOT_BQD_2_K4, 0x00000000}, + {AUD_MODE_CHG_TIMER, 0x00000040}, + {AUD_AFE_12DB_EN, 0x00000001}, + {AUD_CORDIC_SHIFT_0, 0x00000007}, + {AUD_CORDIC_SHIFT_1, 0x00000007}, + {AUD_DEEMPH0_G0, 0x00000380}, + {AUD_DEEMPH1_G0, 0x00000380}, + {AUD_DCOC_0_SRC, 0x0000001a}, + {AUD_DCOC0_SHIFT, 0x00000000}, + {AUD_DCOC_0_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_0_SHIFT_IN1, 0x00000008}, + {AUD_DCOC_PASS_IN, 0x00000003}, + {AUD_IIR3_0_SEL, 0x00000021}, + {AUD_DN2_AFC, 0x00000002}, + {AUD_DCOC_1_SRC, 0x0000001b}, + {AUD_DCOC1_SHIFT, 0x00000000}, + {AUD_DCOC_1_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_1_SHIFT_IN1, 0x00000008}, + {AUD_IIR3_1_SEL, 0x00000023}, + {AUD_RDSI_SEL, 0x00000017}, + {AUD_RDSI_SHIFT, 0x00000000}, + {AUD_RDSQ_SEL, 0x00000017}, + {AUD_RDSQ_SHIFT, 0x00000000}, + {AUD_PLL_INT, 0x0000001e}, + {AUD_PLL_DDS, 0x00000000}, + {AUD_PLL_FRAC, 0x0000e542}, + {AUD_POLYPH80SCALEFAC, 0x00000001}, + {AUD_START_TIMER, 0x00000000}, + { /* end of list */ }, }; static const struct rlist a2_bg[] = { - {AUD_DMD_RA_DDS, 0x002a4f2f}, - {AUD_C1_UP_THR, 0x00007000}, - {AUD_C1_LO_THR, 0x00005400}, - {AUD_C2_UP_THR, 0x00005400}, - {AUD_C2_LO_THR, 0x00003000}, + {AUD_DMD_RA_DDS, 0x002a4f2f}, + {AUD_C1_UP_THR, 0x00007000}, + {AUD_C1_LO_THR, 0x00005400}, + {AUD_C2_UP_THR, 0x00005400}, + {AUD_C2_LO_THR, 0x00003000}, { /* end of list */ }, }; static const struct rlist a2_dk[] = { - {AUD_DMD_RA_DDS, 0x002a4f2f}, - {AUD_C1_UP_THR, 0x00007000}, - {AUD_C1_LO_THR, 0x00005400}, - {AUD_C2_UP_THR, 0x00005400}, - {AUD_C2_LO_THR, 0x00003000}, - {AUD_DN0_FREQ, 0x00003a1c}, - {AUD_DN2_FREQ, 0x0000d2e0}, + {AUD_DMD_RA_DDS, 0x002a4f2f}, + {AUD_C1_UP_THR, 0x00007000}, + {AUD_C1_LO_THR, 0x00005400}, + {AUD_C2_UP_THR, 0x00005400}, + {AUD_C2_LO_THR, 0x00003000}, + {AUD_DN0_FREQ, 0x00003a1c}, + {AUD_DN2_FREQ, 0x0000d2e0}, { /* end of list */ }, }; -/* unknown, probably NTSC-M */ - static const struct rlist a2_m[] = { - {AUD_DMD_RA_DDS, 0x002a0425}, - {AUD_C1_UP_THR, 0x00003c00}, - {AUD_C1_LO_THR, 0x00003000}, - {AUD_C2_UP_THR, 0x00006000}, - {AUD_C2_LO_THR, 0x00003c00}, - {AUD_DEEMPH0_A0, 0x00007a80}, - {AUD_DEEMPH1_A0, 0x00007a80}, - {AUD_DEEMPH0_G0, 0x00001200}, - {AUD_DEEMPH1_G0, 0x00001200}, - {AUD_DN0_FREQ, 0x0000283b}, - {AUD_DN1_FREQ, 0x00003418}, - {AUD_DN2_FREQ, 0x000029c7}, - {AUD_POLY0_DDS_CONSTANT, 0x000a7540}, + + static const struct rlist a1_i[] = { + {AUD_ERRLOGPERIOD_R, 0x00000064}, + {AUD_ERRINTRPTTHSHLD1_R, 0x00000fff}, + {AUD_ERRINTRPTTHSHLD2_R, 0x0000001f}, + {AUD_ERRINTRPTTHSHLD3_R, 0x0000000f}, + {AUD_PDF_DDS_CNST_BYTE2, 0x06}, + {AUD_PDF_DDS_CNST_BYTE1, 0x82}, + {AUD_PDF_DDS_CNST_BYTE0, 0x12}, + {AUD_QAM_MODE, 0x05}, + {AUD_PHACC_FREQ_8MSB, 0x3a}, + {AUD_PHACC_FREQ_8LSB, 0x93}, + {AUD_DMD_RA_DDS, 0x002a4f2f}, + {AUD_PLL_INT, 0x0000001e}, + {AUD_PLL_DDS, 0x00000004}, + {AUD_PLL_FRAC, 0x0000e542}, + {AUD_RATE_ADJ1, 0x00000100}, + {AUD_RATE_ADJ2, 0x00000200}, + {AUD_RATE_ADJ3, 0x00000300}, + {AUD_RATE_ADJ4, 0x00000400}, + {AUD_RATE_ADJ5, 0x00000500}, + {AUD_THR_FR, 0x00000000}, + {AUD_PILOT_BQD_1_K0, 0x0000755b}, + {AUD_PILOT_BQD_1_K1, 0x00551340}, + {AUD_PILOT_BQD_1_K2, 0x006d30be}, + {AUD_PILOT_BQD_1_K3, 0xffd394af}, + {AUD_PILOT_BQD_1_K4, 0x00400000}, + {AUD_PILOT_BQD_2_K0, 0x00040000}, + {AUD_PILOT_BQD_2_K1, 0x002a4841}, + {AUD_PILOT_BQD_2_K2, 0x00400000}, + {AUD_PILOT_BQD_2_K3, 0x00000000}, + {AUD_PILOT_BQD_2_K4, 0x00000000}, + {AUD_MODE_CHG_TIMER, 0x00000060}, + {AUD_AFE_12DB_EN, 0x00000001}, + {AAGC_HYST, 0x0000000a}, + {AUD_CORDIC_SHIFT_0, 0x00000007}, + {AUD_CORDIC_SHIFT_1, 0x00000007}, + {AUD_C1_UP_THR, 0x00007000}, + {AUD_C1_LO_THR, 0x00005400}, + {AUD_C2_UP_THR, 0x00005400}, + {AUD_C2_LO_THR, 0x00003000}, + {AUD_DCOC_0_SRC, 0x0000001a}, + {AUD_DCOC0_SHIFT, 0x00000000}, + {AUD_DCOC_0_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_0_SHIFT_IN1, 0x00000008}, + {AUD_DCOC_PASS_IN, 0x00000003}, + {AUD_IIR3_0_SEL, 0x00000021}, + {AUD_DN2_AFC, 0x00000002}, + {AUD_DCOC_1_SRC, 0x0000001b}, + {AUD_DCOC1_SHIFT, 0x00000000}, + {AUD_DCOC_1_SHIFT_IN0, 0x0000000a}, + {AUD_DCOC_1_SHIFT_IN1, 0x00000008}, + {AUD_IIR3_1_SEL, 0x00000023}, + {AUD_DN0_FREQ, 0x000035a3}, + {AUD_DN2_FREQ, 0x000029c7}, + {AUD_CRDC0_SRC_SEL, 0x00000511}, + {AUD_IIR1_0_SEL, 0x00000001}, + {AUD_IIR1_1_SEL, 0x00000000}, + {AUD_IIR3_2_SEL, 0x00000003}, + {AUD_IIR3_2_SHIFT, 0x00000000}, + {AUD_IIR3_0_SEL, 0x00000002}, + {AUD_IIR2_0_SEL, 0x00000021}, + {AUD_IIR2_0_SHIFT, 0x00000002}, + {AUD_DEEMPH0_SRC_SEL, 0x0000000b}, + {AUD_DEEMPH1_SRC_SEL, 0x0000000b}, + {AUD_POLYPH80SCALEFAC, 0x00000001}, + {AUD_START_TIMER, 0x00000000}, { /* end of list */ }, }; - static const struct rlist a2_deemph50[] = { - {AUD_DEEMPH0_G0, 0x00000380}, - {AUD_DEEMPH1_G0, 0x00000380}, - {AUD_DEEMPHGAIN_R, 0x000011e1}, - {AUD_DEEMPHNUMER1_R, 0x0002a7bc}, - {AUD_DEEMPHNUMER2_R, 0x0003023c}, - { /* end of list */ }, + static const struct rlist am_l[] = { + {AUD_ERRLOGPERIOD_R, 0x00000064}, + {AUD_ERRINTRPTTHSHLD1_R, 0x00000FFF}, + {AUD_ERRINTRPTTHSHLD2_R, 0x0000001F}, + {AUD_ERRINTRPTTHSHLD3_R, 0x0000000F}, + {AUD_PDF_DDS_CNST_BYTE2, 0x48}, + {AUD_PDF_DDS_CNST_BYTE1, 0x3D}, + {AUD_QAM_MODE, 0x00}, + {AUD_PDF_DDS_CNST_BYTE0, 0xf5}, + {AUD_PHACC_FREQ_8MSB, 0x3a}, + {AUD_PHACC_FREQ_8LSB, 0x4a}, + {AUD_DEEMPHGAIN_R, 0x00006680}, + {AUD_DEEMPHNUMER1_R, 0x000353DE}, + {AUD_DEEMPHNUMER2_R, 0x000001B1}, + {AUD_DEEMPHDENOM1_R, 0x0000F3D0}, + {AUD_DEEMPHDENOM2_R, 0x00000000}, + {AUD_FM_MODE_ENABLE, 0x00000007}, + {AUD_POLYPH80SCALEFAC, 0x00000003}, + {AUD_AFE_12DB_EN, 0x00000001}, + {AAGC_GAIN, 0x00000000}, + {AAGC_HYST, 0x00000018}, + {AAGC_DEF, 0x00000020}, + {AUD_DN0_FREQ, 0x00000000}, + {AUD_POLY0_DDS_CONSTANT, 0x000E4DB2}, + {AUD_DCOC_0_SRC, 0x00000021}, + {AUD_IIR1_0_SEL, 0x00000000}, + {AUD_IIR1_0_SHIFT, 0x00000007}, + {AUD_IIR1_1_SEL, 0x00000002}, + {AUD_IIR1_1_SHIFT, 0x00000000}, + {AUD_DCOC_1_SRC, 0x00000003}, + {AUD_DCOC1_SHIFT, 0x00000000}, + {AUD_DCOC_PASS_IN, 0x00000000}, + {AUD_IIR1_2_SEL, 0x00000023}, + {AUD_IIR1_2_SHIFT, 0x00000000}, + {AUD_IIR1_3_SEL, 0x00000004}, + {AUD_IIR1_3_SHIFT, 0x00000007}, + {AUD_IIR1_4_SEL, 0x00000005}, + {AUD_IIR1_4_SHIFT, 0x00000007}, + {AUD_IIR3_0_SEL, 0x00000007}, + {AUD_IIR3_0_SHIFT, 0x00000000}, + {AUD_DEEMPH0_SRC_SEL, 0x00000011}, + {AUD_DEEMPH0_SHIFT, 0x00000000}, + {AUD_DEEMPH0_G0, 0x00007000}, + {AUD_DEEMPH0_A0, 0x00000000}, + {AUD_DEEMPH0_B0, 0x00000000}, + {AUD_DEEMPH0_A1, 0x00000000}, + {AUD_DEEMPH0_B1, 0x00000000}, + {AUD_DEEMPH1_SRC_SEL, 0x00000011}, + {AUD_DEEMPH1_SHIFT, 0x00000000}, + {AUD_DEEMPH1_G0, 0x00007000}, + {AUD_DEEMPH1_A0, 0x00000000}, + {AUD_DEEMPH1_B0, 0x00000000}, + {AUD_DEEMPH1_A1, 0x00000000}, + {AUD_DEEMPH1_B1, 0x00000000}, + {AUD_OUT0_SEL, 0x0000003F}, + {AUD_OUT1_SEL, 0x0000003F}, + {AUD_DMD_RA_DDS, 0x00F5C285}, + {AUD_PLL_INT, 0x0000001E}, + {AUD_PLL_DDS, 0x00000000}, + {AUD_PLL_FRAC, 0x0000E542}, + {AUD_RATE_ADJ1, 0x00000100}, + {AUD_RATE_ADJ2, 0x00000200}, + {AUD_RATE_ADJ3, 0x00000300}, + {AUD_RATE_ADJ4, 0x00000400}, + {AUD_RATE_ADJ5, 0x00000500}, + {AUD_RATE_THRES_DMD, 0x000000C0}, + { /* end of list */ }, }; - static const struct rlist a2_deemph75[] = { - {AUD_DEEMPH0_G0, 0x00000480}, - {AUD_DEEMPH1_G0, 0x00000480}, - {AUD_DEEMPHGAIN_R, 0x00009000}, - {AUD_DEEMPHNUMER1_R, 0x000353de}, - {AUD_DEEMPHNUMER2_R, 0x000001b1}, + static const struct rlist a2_deemph50[] = { + {AUD_DEEMPH0_G0, 0x00000380}, + {AUD_DEEMPH1_G0, 0x00000380}, + {AUD_DEEMPHGAIN_R, 0x000011e1}, + {AUD_DEEMPHNUMER1_R, 0x0002a7bc}, + {AUD_DEEMPHNUMER2_R, 0x0003023c}, { /* end of list */ }, }; set_audio_start(core, SEL_A2); - set_audio_registers(core, a2_common); switch (core->tvaudio) { - case WW_A2_BG: - dprintk("%s PAL-BG A2 (status: known-good)\n",__FUNCTION__); - set_audio_registers(core, a2_bg); - set_audio_registers(core, a2_deemph50); + case WW_BG: + dprintk("%s PAL-BG A1/2 (status: known-good)\n", __FUNCTION__); + set_audio_registers(core, a2_bgdk_common); + set_audio_registers(core, a2_bg); + set_audio_registers(core, a2_deemph50); break; - case WW_A2_DK: - dprintk("%s PAL-DK A2 (status: known-good)\n",__FUNCTION__); - set_audio_registers(core, a2_dk); - set_audio_registers(core, a2_deemph50); + case WW_DK: + dprintk("%s PAL-DK A1/2 (status: known-good)\n", __FUNCTION__); + set_audio_registers(core, a2_bgdk_common); + set_audio_registers(core, a2_dk); + set_audio_registers(core, a2_deemph50); break; - case WW_A2_M: - dprintk("%s NTSC-M A2 (status: unknown)\n",__FUNCTION__); - set_audio_registers(core, a2_m); - set_audio_registers(core, a2_deemph75); + case WW_I: + dprintk("%s PAL-I A1 (status: known-good)\n", __FUNCTION__); + set_audio_registers(core, a1_i); + set_audio_registers(core, a2_deemph50); + break; + case WW_L: + dprintk("%s AM-L (status: devel)\n", __FUNCTION__); + set_audio_registers(core, am_l); + break; + default: + dprintk("%s Warning: wrong value\n", __FUNCTION__); + return; break; }; @@ -656,71 +633,71 @@ static void set_audio_standard_EIAJ(struct cx88_core *core) { /* end of list */ }, }; - dprintk("%s (status: unknown)\n",__FUNCTION__); + dprintk("%s (status: unknown)\n", __FUNCTION__); set_audio_start(core, SEL_EIAJ); set_audio_registers(core, eiaj); set_audio_finish(core, EN_EIAJ_AUTO_STEREO); } -static void set_audio_standard_FM(struct cx88_core *core, enum cx88_deemph_type deemph) +static void set_audio_standard_FM(struct cx88_core *core, + enum cx88_deemph_type deemph) { static const struct rlist fm_deemph_50[] = { - { AUD_DEEMPH0_G0, 0x0C45 }, - { AUD_DEEMPH0_A0, 0x6262 }, - { AUD_DEEMPH0_B0, 0x1C29 }, - { AUD_DEEMPH0_A1, 0x3FC66}, - { AUD_DEEMPH0_B1, 0x399A }, - - { AUD_DEEMPH1_G0, 0x0D80 }, - { AUD_DEEMPH1_A0, 0x6262 }, - { AUD_DEEMPH1_B0, 0x1C29 }, - { AUD_DEEMPH1_A1, 0x3FC66}, - { AUD_DEEMPH1_B1, 0x399A}, - - { AUD_POLYPH80SCALEFAC, 0x0003}, + {AUD_DEEMPH0_G0, 0x0C45}, + {AUD_DEEMPH0_A0, 0x6262}, + {AUD_DEEMPH0_B0, 0x1C29}, + {AUD_DEEMPH0_A1, 0x3FC66}, + {AUD_DEEMPH0_B1, 0x399A}, + + {AUD_DEEMPH1_G0, 0x0D80}, + {AUD_DEEMPH1_A0, 0x6262}, + {AUD_DEEMPH1_B0, 0x1C29}, + {AUD_DEEMPH1_A1, 0x3FC66}, + {AUD_DEEMPH1_B1, 0x399A}, + + {AUD_POLYPH80SCALEFAC, 0x0003}, { /* end of list */ }, }; static const struct rlist fm_deemph_75[] = { - { AUD_DEEMPH0_G0, 0x091B }, - { AUD_DEEMPH0_A0, 0x6B68 }, - { AUD_DEEMPH0_B0, 0x11EC }, - { AUD_DEEMPH0_A1, 0x3FC66}, - { AUD_DEEMPH0_B1, 0x399A }, - - { AUD_DEEMPH1_G0, 0x0AA0 }, - { AUD_DEEMPH1_A0, 0x6B68 }, - { AUD_DEEMPH1_B0, 0x11EC }, - { AUD_DEEMPH1_A1, 0x3FC66}, - { AUD_DEEMPH1_B1, 0x399A}, - - { AUD_POLYPH80SCALEFAC, 0x0003}, + {AUD_DEEMPH0_G0, 0x091B}, + {AUD_DEEMPH0_A0, 0x6B68}, + {AUD_DEEMPH0_B0, 0x11EC}, + {AUD_DEEMPH0_A1, 0x3FC66}, + {AUD_DEEMPH0_B1, 0x399A}, + + {AUD_DEEMPH1_G0, 0x0AA0}, + {AUD_DEEMPH1_A0, 0x6B68}, + {AUD_DEEMPH1_B0, 0x11EC}, + {AUD_DEEMPH1_A1, 0x3FC66}, + {AUD_DEEMPH1_B1, 0x399A}, + + {AUD_POLYPH80SCALEFAC, 0x0003}, { /* end of list */ }, }; /* It is enough to leave default values? */ static const struct rlist fm_no_deemph[] = { - { AUD_POLYPH80SCALEFAC, 0x0003}, + {AUD_POLYPH80SCALEFAC, 0x0003}, { /* end of list */ }, }; - dprintk("%s (status: unknown)\n",__FUNCTION__); + dprintk("%s (status: unknown)\n", __FUNCTION__); set_audio_start(core, SEL_FMRADIO); - switch (deemph) - { - case FM_NO_DEEMPH: - set_audio_registers(core, fm_no_deemph); - break; + switch (deemph) { + case FM_NO_DEEMPH: + set_audio_registers(core, fm_no_deemph); + break; - case FM_DEEMPH_50: - set_audio_registers(core, fm_deemph_50); - break; + case FM_DEEMPH_50: + set_audio_registers(core, fm_deemph_50); + break; - case FM_DEEMPH_75: - set_audio_registers(core, fm_deemph_75); - break; + case FM_DEEMPH_75: + set_audio_registers(core, fm_deemph_75); + break; } set_audio_finish(core, EN_FMRADIO_AUTO_STEREO); @@ -728,36 +705,64 @@ static void set_audio_standard_FM(struct cx88_core *core, enum cx88_deemph_type /* ----------------------------------------------------------- */ +int cx88_detect_nicam(struct cx88_core *core) +{ + int i, j = 0; + + dprintk("start nicam autodetect.\n"); + + for (i = 0; i < 6; i++) { + /* if bit1=1 then nicam is detected */ + j += ((cx_read(AUD_NICAM_STATUS2) & 0x02) >> 1); + + /* 3x detected: absolutly sure now */ + if (j == 3) { + dprintk("nicam is detected.\n"); + return 1; + } + + /* wait a little bit for next reading status */ + msleep(10); + } + + dprintk("nicam is not detected.\n"); + return 0; +} + void cx88_set_tvaudio(struct cx88_core *core) { switch (core->tvaudio) { case WW_BTSC: set_audio_standard_BTSC(core, 0, EN_BTSC_AUTO_STEREO); break; - case WW_NICAM_BGDKL: - set_audio_standard_NICAM_L(core,0); - break; - case WW_NICAM_I: - set_audio_standard_PAL_I(core,0); - break; - case WW_A2_BG: - case WW_A2_DK: - case WW_A2_M: - set_audio_standard_A2(core, EN_A2_FORCE_MONO1); + case WW_BG: + case WW_DK: + case WW_I: + case WW_L: + /* prepare all dsp registers */ + set_audio_standard_A2(core, EN_A2_FORCE_MONO1); + + /* set nicam mode - otherwise + AUD_NICAM_STATUS2 contains wrong values */ + set_audio_standard_NICAM(core, EN_NICAM_AUTO_STEREO); + if (0 == cx88_detect_nicam(core)) { + /* fall back to fm / am mono */ + set_audio_standard_A2(core, EN_A2_FORCE_MONO1); + core->use_nicam = 0; + } else { + core->use_nicam = 1; + } break; case WW_EIAJ: set_audio_standard_EIAJ(core); break; case WW_FM: - set_audio_standard_FM(core,FM_NO_DEEMPH); - break; - case WW_SYSTEM_L_AM: - set_audio_standard_NICAM_L(core, 1); + set_audio_standard_FM(core, FM_NO_DEEMPH); break; case WW_NONE: default: printk("%s/0: unknown tv audio mode [%d]\n", - core->name, core->tvaudio); + core->name, core->tvaudio); break; } return; @@ -766,24 +771,16 @@ void cx88_set_tvaudio(struct cx88_core *core) void cx88_newstation(struct cx88_core *core) { core->audiomode_manual = UNSET; - - switch (core->tvaudio) { - case WW_SYSTEM_L_AM: - /* try nicam ... */ - core->audiomode_current = V4L2_TUNER_MODE_STEREO; - set_audio_standard_NICAM_L(core, 1); - break; - } } void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t) { - static char *m[] = {"stereo", "dual mono", "mono", "sap"}; - static char *p[] = {"no pilot", "pilot c1", "pilot c2", "?"}; - u32 reg,mode,pilot; + static char *m[] = { "stereo", "dual mono", "mono", "sap" }; + static char *p[] = { "no pilot", "pilot c1", "pilot c2", "?" }; + u32 reg, mode, pilot; - reg = cx_read(AUD_STATUS); - mode = reg & 0x03; + reg = cx_read(AUD_STATUS); + mode = reg & 0x03; pilot = (reg >> 2) & 0x03; if (core->astat != reg) @@ -800,14 +797,13 @@ void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t) # if 0 t->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_SAP | - V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2; + V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2; t->rxsubchans = V4L2_TUNER_SUB_MONO; - t->audmode = V4L2_TUNER_MODE_MONO; + t->audmode = V4L2_TUNER_MODE_MONO; switch (core->tvaudio) { case WW_BTSC: - t->capability = V4L2_TUNER_CAP_STEREO | - V4L2_TUNER_CAP_SAP; + t->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_SAP; t->rxsubchans = V4L2_TUNER_SUB_STEREO; if (1 == pilot) { /* SAP */ @@ -819,13 +815,15 @@ void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t) case WW_A2_M: if (1 == pilot) { /* stereo */ - t->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; + t->rxsubchans = + V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; if (0 == mode) t->audmode = V4L2_TUNER_MODE_STEREO; } if (2 == pilot) { /* dual language -- FIXME */ - t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + t->rxsubchans = + V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; t->audmode = V4L2_TUNER_MODE_LANG1; } break; @@ -840,7 +838,7 @@ void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t) t->audmode = V4L2_TUNER_MODE_STEREO; t->rxsubchans |= V4L2_TUNER_SUB_STEREO; } - break ; + break; default: /* nothing */ break; @@ -851,7 +849,7 @@ void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t) void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual) { - u32 ctl = UNSET; + u32 ctl = UNSET; u32 mask = UNSET; if (manual) { @@ -879,68 +877,58 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual) break; } break; - case WW_A2_BG: - case WW_A2_DK: - case WW_A2_M: - switch (mode) { - case V4L2_TUNER_MODE_MONO: - case V4L2_TUNER_MODE_LANG1: - set_audio_standard_A2(core, EN_A2_FORCE_MONO1); - break; - case V4L2_TUNER_MODE_LANG2: - set_audio_standard_A2(core, EN_A2_FORCE_MONO2); - break; - case V4L2_TUNER_MODE_STEREO: - set_audio_standard_A2(core, EN_A2_FORCE_STEREO); - break; - } - break; - case WW_NICAM_BGDKL: - switch (mode) { - case V4L2_TUNER_MODE_MONO: - ctl = EN_NICAM_FORCE_MONO1; - mask = 0x3f; - break; - case V4L2_TUNER_MODE_LANG1: - ctl = EN_NICAM_AUTO_MONO2; - mask = 0x3f; - break; - case V4L2_TUNER_MODE_STEREO: - ctl = EN_NICAM_FORCE_STEREO | EN_DMTRX_LR; - mask = 0x93f; - break; - } - break; - case WW_SYSTEM_L_AM: - switch (mode) { - case V4L2_TUNER_MODE_MONO: - case V4L2_TUNER_MODE_LANG1: /* FIXME */ - set_audio_standard_NICAM_L(core, 0); - break; - case V4L2_TUNER_MODE_STEREO: - set_audio_standard_NICAM_L(core, 1); - break; - } - break; - case WW_NICAM_I: - switch (mode) { - case V4L2_TUNER_MODE_MONO: - case V4L2_TUNER_MODE_LANG1: - set_audio_standard_PAL_I(core, 0); - break; - case V4L2_TUNER_MODE_STEREO: - set_audio_standard_PAL_I(core, 1); - break; + case WW_BG: + case WW_DK: + case WW_I: + case WW_L: + if (1 == core->use_nicam) { + switch (mode) { + case V4L2_TUNER_MODE_MONO: + case V4L2_TUNER_MODE_LANG1: + set_audio_standard_NICAM(core, + EN_NICAM_FORCE_MONO1); + break; + case V4L2_TUNER_MODE_LANG2: + set_audio_standard_NICAM(core, + EN_NICAM_FORCE_MONO2); + break; + case V4L2_TUNER_MODE_STEREO: + set_audio_standard_NICAM(core, + EN_NICAM_FORCE_STEREO); + break; + } + } else { + if ((core->tvaudio == WW_I) || (core->tvaudio == WW_L)) { + /* fall back to fm / am mono */ + set_audio_standard_A2(core, EN_A2_FORCE_MONO1); + } else { + /* TODO: Add A2 autodection */ + switch (mode) { + case V4L2_TUNER_MODE_MONO: + case V4L2_TUNER_MODE_LANG1: + set_audio_standard_A2(core, + EN_A2_FORCE_MONO1); + break; + case V4L2_TUNER_MODE_LANG2: + set_audio_standard_A2(core, + EN_A2_FORCE_MONO2); + break; + case V4L2_TUNER_MODE_STEREO: + set_audio_standard_A2(core, + EN_A2_FORCE_STEREO); + break; + } + } } break; case WW_FM: switch (mode) { case V4L2_TUNER_MODE_MONO: - ctl = EN_FMRADIO_FORCE_MONO; + ctl = EN_FMRADIO_FORCE_MONO; mask = 0x3f; break; case V4L2_TUNER_MODE_STEREO: - ctl = EN_FMRADIO_AUTO_STEREO; + ctl = EN_FMRADIO_AUTO_STEREO; mask = 0x3f; break; } @@ -970,8 +958,8 @@ int cx88_audio_thread(void *data) break; /* just monitor the audio status for now ... */ - memset(&t,0,sizeof(t)); - cx88_get_stereo(core,&t); + memset(&t, 0, sizeof(t)); + cx88_get_stereo(core, &t); if (UNSET != core->audiomode_manual) /* manually set, don't do anything. */ diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 3dbc074fb515..24a48f8a48c1 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -34,6 +34,9 @@ #include "cx88.h" +/* Include V4L1 specific functions. Should be removed soon */ +#include <linux/videodev.h> + MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards"); MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); MODULE_LICENSE("GPL"); @@ -100,7 +103,7 @@ static struct cx88_tvnorm tvnorms[] = { .id = V4L2_STD_PAL_I, .cxiformat = VideoFormatPAL, .cxoformat = 0x181f0008, - },{ + },{ .name = "PAL-M", .id = V4L2_STD_PAL_M, .cxiformat = VideoFormatPALM, @@ -470,7 +473,7 @@ static int restart_video_queue(struct cx8800_dev *dev, struct list_head *item; if (!list_empty(&q->active)) { - buf = list_entry(q->active.next, struct cx88_buffer, vb.queue); + buf = list_entry(q->active.next, struct cx88_buffer, vb.queue); dprintk(2,"restart_queue [%p/%d]: restart dma\n", buf, buf->vb.i); start_video_dma(dev, q, buf); @@ -486,7 +489,7 @@ static int restart_video_queue(struct cx8800_dev *dev, for (;;) { if (list_empty(&q->queued)) return 0; - buf = list_entry(q->queued.next, struct cx88_buffer, vb.queue); + buf = list_entry(q->queued.next, struct cx88_buffer, vb.queue); if (NULL == prev) { list_del(&buf->vb.queue); list_add_tail(&buf->vb.queue,&q->active); @@ -783,11 +786,11 @@ static int video_open(struct inode *inode, struct file *file) cx88_call_i2c_clients(core,AUDC_SET_RADIO,NULL); } - return 0; + return 0; } static ssize_t -video_read(struct file *file, char *data, size_t count, loff_t *ppos) +video_read(struct file *file, char __user *data, size_t count, loff_t *ppos) { struct cx8800_fh *fh = file->private_data; @@ -922,7 +925,7 @@ static int set_control(struct cx88_core *core, struct v4l2_control *ctl) { /* struct cx88_core *core = dev->core; */ struct cx88_ctrl *c = NULL; - u32 v_sat_value; + u32 v_sat_value; u32 value; int i; @@ -1187,7 +1190,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, struct v4l2_format *f = arg; return cx8800_try_fmt(dev,fh,f); } - +#ifdef HAVE_V4L1 /* --- streaming capture ------------------------------------- */ case VIDIOCGMBUF: { @@ -1213,6 +1216,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, } return 0; } +#endif case VIDIOC_REQBUFS: return videobuf_reqbufs(get_queue(fh), arg); @@ -1244,7 +1248,6 @@ static int video_do_ioctl(struct inode *inode, struct file *file, res_free(dev,fh,res); return 0; } - default: return cx88_do_ioctl( inode, file, fh->radio, core, cmd, arg, video_do_ioctl ); } @@ -1252,15 +1255,13 @@ static int video_do_ioctl(struct inode *inode, struct file *file, } int cx88_do_ioctl(struct inode *inode, struct file *file, int radio, - struct cx88_core *core, unsigned int cmd, void *arg, v4l2_kioctl driver_ioctl) + struct cx88_core *core, unsigned int cmd, void *arg, v4l2_kioctl driver_ioctl) { int err; + dprintk( 1, "CORE IOCTL: 0x%x\n", cmd ); if (video_debug > 1) cx88_print_ioctl(core->name,cmd); - printk( KERN_INFO "CORE IOCTL: 0x%x\n", cmd ); - cx88_print_ioctl(core->name,cmd); - dprintk( 1, "CORE IOCTL: 0x%x\n", cmd ); switch (cmd) { /* ---------- tv norms ---------- */ @@ -1401,7 +1402,7 @@ int cx88_do_ioctl(struct inode *inode, struct file *file, int radio, cx88_get_stereo(core ,t); reg = cx_read(MO_DEVICE_STATUS); - t->signal = (reg & (1<<5)) ? 0xffff : 0x0000; + t->signal = (reg & (1<<5)) ? 0xffff : 0x0000; return 0; } case VIDIOC_S_TUNER: @@ -1488,7 +1489,7 @@ static int radio_do_ioctl(struct inode *inode, struct file *file, struct v4l2_capability *cap = arg; memset(cap,0,sizeof(*cap)); - strcpy(cap->driver, "cx8800"); + strcpy(cap->driver, "cx8800"); strlcpy(cap->card, cx88_boards[core->board].name, sizeof(cap->card)); sprintf(cap->bus_info,"PCI:%s", pci_name(dev->pci)); @@ -1505,6 +1506,7 @@ static int radio_do_ioctl(struct inode *inode, struct file *file, memset(t,0,sizeof(*t)); strcpy(t->name, "Radio"); + t->type = V4L2_TUNER_RADIO; cx88_call_i2c_clients(core,VIDIOC_G_TUNER,t); return 0; @@ -1539,6 +1541,7 @@ static int radio_do_ioctl(struct inode *inode, struct file *file, *id = 0; return 0; } +#ifdef HAVE_V4L1 case VIDIOCSTUNER: { struct video_tuner *v = arg; @@ -1549,6 +1552,7 @@ static int radio_do_ioctl(struct inode *inode, struct file *file, cx88_call_i2c_clients(core,VIDIOCSTUNER,v); return 0; } +#endif case VIDIOC_S_TUNER: { struct v4l2_tuner *t = arg; @@ -1829,8 +1833,8 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, /* print pci info */ pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &dev->pci_rev); - pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); - printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, " + pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); + printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, " "latency: %d, mmio: 0x%lx\n", core->name, pci_name(pci_dev), dev->pci_rev, pci_dev->irq, dev->pci_lat,pci_resource_start(pci_dev,0)); @@ -1946,7 +1950,7 @@ fail_free: static void __devexit cx8800_finidev(struct pci_dev *pci_dev) { - struct cx8800_dev *dev = pci_get_drvdata(pci_dev); + struct cx8800_dev *dev = pci_get_drvdata(pci_dev); struct cx88_core *core = dev->core; /* stop thread */ diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index f48dd4353568..b19d3a9e2298 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -22,7 +22,7 @@ #include <linux/pci.h> #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> -#include <linux/videodev.h> +#include <linux/videodev2.h> #include <linux/kdev_t.h> #include <media/tuner.h> @@ -148,7 +148,7 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_PIXELVIEW 3 #define CX88_BOARD_ATI_WONDER_PRO 4 #define CX88_BOARD_WINFAST2000XP_EXPERT 5 -#define CX88_BOARD_AVERTV_303 6 +#define CX88_BOARD_AVERTV_STUDIO_303 6 #define CX88_BOARD_MSI_TVANYWHERE_MASTER 7 #define CX88_BOARD_WINFAST_DV2000 8 #define CX88_BOARD_LEADTEK_PVR2000 9 @@ -174,6 +174,11 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_ADSTECH_DVB_T_PCI 29 #define CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1 30 #define CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD 31 +#define CX88_BOARD_AVERMEDIA_ULTRATV_MC_550 32 +#define CX88_BOARD_KWORLD_VSTREAM_EXPERT_DVD 33 +#define CX88_BOARD_ATI_HDTVWONDER 34 +#define CX88_BOARD_WINFAST_DTV1000 35 +#define CX88_BOARD_AVERTV_303 36 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, @@ -203,8 +208,8 @@ struct cx88_board { int tda9887_conf; struct cx88_input input[MAX_CX88_INPUT]; struct cx88_input radio; - int blackbird:1; - int dvb:1; + unsigned int blackbird:1; + unsigned int dvb:1; }; struct cx88_subid { @@ -255,8 +260,8 @@ struct cx88_core { /* pci stuff */ int pci_bus; int pci_slot; - u32 __iomem *lmmio; - u8 __iomem *bmmio; + u32 __iomem *lmmio; + u8 __iomem *bmmio; u32 shadow[SHADOW_MAX]; int pci_irqmask; @@ -287,6 +292,7 @@ struct cx88_core { u32 audiomode_current; u32 input; u32 astat; + u32 use_nicam; /* IR remote control state */ struct cx88_IR *ir; @@ -370,6 +376,14 @@ struct cx8802_suspend_state { int disabled; }; +/* TODO: move this to struct v4l2_mpeg_compression ? */ +struct blackbird_dnr { + u32 mode; + u32 type; + u32 spatial; + u32 temporal; +}; + struct cx8802_dev { struct cx88_core *core; spinlock_t slock; @@ -400,6 +414,10 @@ struct cx8802_dev { /* for switching modulation types */ unsigned char ts_gen_cntrl; + + /* mpeg params */ + struct v4l2_mpeg_compression params; + struct blackbird_dnr dnr_params; }; /* ----------------------------------------------------------- */ @@ -514,22 +532,20 @@ extern void cx88_card_setup(struct cx88_core *core); #define WW_NONE 1 #define WW_BTSC 2 -#define WW_NICAM_I 3 -#define WW_NICAM_BGDKL 4 -#define WW_A1 5 -#define WW_A2_BG 6 -#define WW_A2_DK 7 -#define WW_A2_M 8 -#define WW_EIAJ 9 -#define WW_SYSTEM_L_AM 10 -#define WW_I2SPT 11 -#define WW_FM 12 +#define WW_BG 3 +#define WW_DK 4 +#define WW_I 5 +#define WW_L 6 +#define WW_EIAJ 7 +#define WW_I2SPT 8 +#define WW_FM 9 void cx88_set_tvaudio(struct cx88_core *core); void cx88_newstation(struct cx88_core *core); void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t); void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual); int cx88_audio_thread(void *data); +int cx88_detect_nicam(struct cx88_core *core); /* ----------------------------------------------------------- */ /* cx88-input.c */ @@ -541,7 +557,8 @@ void cx88_ir_irq(struct cx88_core *core); /* ----------------------------------------------------------- */ /* cx88-mpeg.c */ -int cx8802_buf_prepare(struct cx8802_dev *dev, struct cx88_buffer *buf); +int cx8802_buf_prepare(struct cx8802_dev *dev, struct cx88_buffer *buf, + enum v4l2_field field); void cx8802_buf_queue(struct cx8802_dev *dev, struct cx88_buffer *buf); void cx8802_cancel_buffers(struct cx8802_dev *dev); @@ -562,6 +579,10 @@ extern int cx88_do_ioctl(struct inode *inode, struct file *file, int radio, extern int (*cx88_ioctl_hook)(struct inode *inode, struct file *file, unsigned int cmd, void *arg); extern unsigned int (*cx88_ioctl_translator)(unsigned int cmd); +void blackbird_set_params(struct cx8802_dev *dev, + struct v4l2_mpeg_compression *params); +void blackbird_set_dnr_params(struct cx8802_dev *dev, + struct blackbird_dnr* dnr_params); /* * Local variables: diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig new file mode 100644 index 000000000000..885fd0170086 --- /dev/null +++ b/drivers/media/video/em28xx/Kconfig @@ -0,0 +1,12 @@ +config VIDEO_EM28XX + tristate "Empia EM2800/2820/2840 USB video capture support" + depends on VIDEO_DEV && USB && I2C + select VIDEO_BUF + select VIDEO_TUNER + select VIDEO_TVEEPROM + select VIDEO_IR + ---help--- + This is a video4linux driver for Empia 28xx based TV cards. + + To compile this driver as a module, choose M here: the + module will be called em28xx diff --git a/drivers/media/video/em28xx/Makefile b/drivers/media/video/em28xx/Makefile new file mode 100644 index 000000000000..da457a05b0dd --- /dev/null +++ b/drivers/media/video/em28xx/Makefile @@ -0,0 +1,6 @@ +em28xx-objs := em28xx-video.o em28xx-i2c.o em28xx-cards.o em28xx-core.o \ + em28xx-input.o + +obj-$(CONFIG_VIDEO_EM28XX) += em28xx.o + +EXTRA_CFLAGS += -I$(src)/.. diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c new file mode 100644 index 000000000000..57779e63f35d --- /dev/null +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -0,0 +1,292 @@ +/* + em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB video capture devices + + Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> + Markus Rechberger <mrechberger@gmail.com> + Mauro Carvalho Chehab <mchehab@brturbo.com.br> + Sascha Sommer <saschasommer@freenet.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/usb.h> +#include <media/tuner.h> +#include <media/audiochip.h> +#include <media/tveeprom.h> +#include "msp3400.h" + +#include "em28xx.h" + +struct em28xx_board em28xx_boards[] = { + [EM2800_BOARD_UNKNOWN] = { + .name = "Unknown EM2800 video grabber", + .is_em2800 = 1, + .vchannels = 2, + .norm = VIDEO_MODE_PAL, + .tda9887_conf = TDA9887_PRESENT, + .has_tuner = 1, + .decoder = EM28XX_SAA7113, + .input = {{ + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = 1, + },{ + .type = EM28XX_VMUX_SVIDEO, + .vmux = 9, + .amux = 1, + }}, + }, + [EM2820_BOARD_UNKNOWN] = { + .name = "Unknown EM2820/2840 video grabber", + .is_em2800 = 0, + .vchannels = 2, + .norm = VIDEO_MODE_PAL, + .tda9887_conf = TDA9887_PRESENT, + .has_tuner = 1, + .decoder = EM28XX_SAA7113, + .input = {{ + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = 1, + },{ + .type = EM28XX_VMUX_SVIDEO, + .vmux = 9, + .amux = 1, + }}, + }, + [EM2820_BOARD_TERRATEC_CINERGY_250] = { + .name = "Terratec Cinergy 250 USB", + .vchannels = 3, + .norm = VIDEO_MODE_PAL, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .tda9887_conf = TDA9887_PRESENT, + .has_tuner = 1, + .decoder = EM28XX_SAA7113, + .input = {{ + .type = EM28XX_VMUX_TELEVISION, + .vmux = 2, + .amux = 0, + },{ + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = 1, + },{ + .type = EM28XX_VMUX_SVIDEO, + .vmux = 9, + .amux = 1, + }}, + }, + [EM2820_BOARD_PINNACLE_USB_2] = { + .name = "Pinnacle PCTV USB 2", + .vchannels = 3, + .norm = VIDEO_MODE_PAL, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .tda9887_conf = TDA9887_PRESENT, + .has_tuner = 1, + .decoder = EM28XX_SAA7113, + .input = {{ + .type = EM28XX_VMUX_TELEVISION, + .vmux = 2, + .amux = 0, + },{ + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = 1, + },{ + .type = EM28XX_VMUX_SVIDEO, + .vmux = 9, + .amux = 1, + }}, + }, + [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { + .name = "Hauppauge WinTV USB 2", + .vchannels = 3, + .norm = VIDEO_MODE_NTSC, + .tuner_type = TUNER_PHILIPS_FM1236_MK3, + .tda9887_conf = TDA9887_PRESENT|TDA9887_PORT1_ACTIVE|TDA9887_PORT2_ACTIVE, + .has_tuner = 1, + .decoder = EM28XX_TVP5150, + .has_msp34xx = 1, + /*FIXME: S-Video not tested */ + .input = {{ + .type = EM28XX_VMUX_TELEVISION, + .vmux = 0, + .amux = 6, + },{ + .type = EM28XX_VMUX_SVIDEO, + .vmux = 2, + .amux = 1, + }}, + }, + [EM2820_BOARD_MSI_VOX_USB_2] = { + .name = "MSI VOX USB 2.0", + .vchannels = 3, + .norm = VIDEO_MODE_PAL, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .tda9887_conf = TDA9887_PRESENT|TDA9887_PORT1_ACTIVE|TDA9887_PORT2_ACTIVE, + .has_tuner = 1, + .decoder = EM28XX_SAA7114, + .input = {{ + .type = EM28XX_VMUX_TELEVISION, + .vmux = 4, + .amux = 0, + },{ + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = 1, + },{ + .type = EM28XX_VMUX_SVIDEO, + .vmux = 9, + .amux = 1, + }}, + }, + [EM2800_BOARD_TERRATEC_CINERGY_200] = { + .name = "Terratec Cinergy 200 USB", + .is_em2800 = 1, + .vchannels = 3, + .norm = VIDEO_MODE_PAL, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .tda9887_conf = TDA9887_PRESENT, + .has_tuner = 1, + .decoder = EM28XX_SAA7113, + .input = {{ + .type = EM28XX_VMUX_TELEVISION, + .vmux = 2, + .amux = 0, + },{ + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = 1, + },{ + .type = EM28XX_VMUX_SVIDEO, + .vmux = 9, + .amux = 1, + }}, + }, + [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { + .name = "Leadtek Winfast USB II", + .is_em2800 = 1, + .vchannels = 3, + .norm = VIDEO_MODE_PAL, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .tda9887_conf = TDA9887_PRESENT, + .has_tuner = 1, + .decoder = EM28XX_SAA7113, + .input = {{ + .type = EM28XX_VMUX_TELEVISION, + .vmux = 2, + .amux = 0, + },{ + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = 1, + },{ + .type = EM28XX_VMUX_SVIDEO, + .vmux = 9, + .amux = 1, + }}, + }, + [EM2800_BOARD_KWORLD_USB2800] = { + .name = "Kworld USB2800", + .is_em2800 = 1, + .vchannels = 3, + .norm = VIDEO_MODE_PAL, + .tuner_type = TUNER_PHILIPS_ATSC, + .tda9887_conf = TDA9887_PRESENT, + .has_tuner = 1, + .decoder = EM28XX_SAA7113, + .input = {{ + .type = EM28XX_VMUX_TELEVISION, + .vmux = 2, + .amux = 0, + },{ + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = 1, + },{ + .type = EM28XX_VMUX_SVIDEO, + .vmux = 9, + .amux = 1, + }}, + }, + [EM2820_BOARD_PINNACLE_DVC_90] = { + .name = "Pinnacle Dazzle DVC 90", + .vchannels = 3, + .norm = VIDEO_MODE_PAL, + .has_tuner = 0, + .decoder = EM28XX_SAA7113, + .input = {{ + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = 0, + .amux = 1, + },{ + .type = EM28XX_VMUX_SVIDEO, + .vmux = 9, + .amux = 1, + }}, + }, +}; +const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); + +/* table of devices that work with this driver */ +struct usb_device_id em28xx_id_table [] = { + { USB_DEVICE(0xeb1a, 0x2800), .driver_info = EM2800_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_MSI_VOX_USB_2 }, + { USB_DEVICE(0x0ccd, 0x0036), .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, + { USB_DEVICE(0x2304, 0x0208), .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, + { USB_DEVICE(0x2040, 0x4200), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, + { USB_DEVICE(0x2304, 0x0207), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, + { }, +}; + +void em28xx_card_setup(struct em28xx *dev) +{ + /* request some modules */ + if (dev->model == EM2820_BOARD_HAUPPAUGE_WINTV_USB_2) { + struct tveeprom tv; + struct v4l2_audioout ao; +#ifdef CONFIG_MODULES + request_module("tveeprom"); + request_module("ir-kbd-i2c"); + request_module("msp3400"); +#endif + /* Call first TVeeprom */ + + dev->i2c_client.addr = 0xa0 >> 1; + tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata); + + dev->tuner_type= tv.tuner_type; + if (tv.audio_processor == AUDIO_CHIP_MSP34XX) { + dev->has_msp34xx=1; + memset (&ao,0,sizeof(ao)); + + ao.index=2; + ao.mode=V4L2_AUDMODE_32BITS; + em28xx_i2c_call_clients(dev, VIDIOC_S_AUDOUT, &ao); + } else + dev->has_msp34xx=0; + } +} + +EXPORT_SYMBOL(em28xx_boards); +EXPORT_SYMBOL(em28xx_bcount); +EXPORT_SYMBOL(em28xx_id_table); + +MODULE_DEVICE_TABLE (usb, em28xx_id_table); diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c new file mode 100644 index 000000000000..d54bc0127484 --- /dev/null +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -0,0 +1,817 @@ +/* + em28xx-core.c - driver for Empia EM2800/EM2820/2840 USB video capture devices + + Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> + Markus Rechberger <mrechberger@gmail.com> + Mauro Carvalho Chehab <mchehab@brturbo.com.br> + Sascha Sommer <saschasommer@freenet.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/usb.h> +#include <linux/vmalloc.h> + +#include "em28xx.h" + +/* #define ENABLE_DEBUG_ISOC_FRAMES */ + +unsigned int core_debug; +module_param(core_debug,int,0644); +MODULE_PARM_DESC(core_debug,"enable debug messages [core]"); + +#define em28xx_coredbg(fmt, arg...) do {\ + if (core_debug) \ + printk(KERN_INFO "%s %s :"fmt, \ + dev->name, __FUNCTION__ , ##arg); } while (0) + +unsigned int reg_debug; +module_param(reg_debug,int,0644); +MODULE_PARM_DESC(reg_debug,"enable debug messages [URB reg]"); + +#define em28xx_regdbg(fmt, arg...) do {\ + if (reg_debug) \ + printk(KERN_INFO "%s %s :"fmt, \ + dev->name, __FUNCTION__ , ##arg); } while (0) + +unsigned int isoc_debug; +module_param(isoc_debug,int,0644); +MODULE_PARM_DESC(isoc_debug,"enable debug messages [isoc transfers]"); + +#define em28xx_isocdbg(fmt, arg...) do {\ + if (isoc_debug) \ + printk(KERN_INFO "%s %s :"fmt, \ + dev->name, __FUNCTION__ , ##arg); } while (0) + +static int alt = EM28XX_PINOUT; +module_param(alt, int, 0644); +MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint"); + +/* ------------------------------------------------------------------ */ +/* debug help functions */ + +static const char *v4l1_ioctls[] = { + "0", "CGAP", "GCHAN", "SCHAN", "GTUNER", "STUNER", "GPICT", "SPICT", + "CCAPTURE", "GWIN", "SWIN", "GFBUF", "SFBUF", "KEY", "GFREQ", + "SFREQ", "GAUDIO", "SAUDIO", "SYNC", "MCAPTURE", "GMBUF", "GUNIT", + "GCAPTURE", "SCAPTURE", "SPLAYMODE", "SWRITEMODE", "GPLAYINFO", + "SMICROCODE", "GVBIFMT", "SVBIFMT" }; +#define V4L1_IOCTLS ARRAY_SIZE(v4l1_ioctls) + +static const char *v4l2_ioctls[] = { + "QUERYCAP", "1", "ENUM_PIXFMT", "ENUM_FBUFFMT", "G_FMT", "S_FMT", + "G_COMP", "S_COMP", "REQBUFS", "QUERYBUF", "G_FBUF", "S_FBUF", + "G_WIN", "S_WIN", "PREVIEW", "QBUF", "16", "DQBUF", "STREAMON", + "STREAMOFF", "G_PERF", "G_PARM", "S_PARM", "G_STD", "S_STD", + "ENUMSTD", "ENUMINPUT", "G_CTRL", "S_CTRL", "G_TUNER", "S_TUNER", + "G_FREQ", "S_FREQ", "G_AUDIO", "S_AUDIO", "35", "QUERYCTRL", + "QUERYMENU", "G_INPUT", "S_INPUT", "ENUMCVT", "41", "42", "43", + "44", "45", "G_OUTPUT", "S_OUTPUT", "ENUMOUTPUT", "G_AUDOUT", + "S_AUDOUT", "ENUMFX", "G_EFFECT", "S_EFFECT", "G_MODULATOR", + "S_MODULATOR" +}; +#define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls) + +void em28xx_print_ioctl(char *name, unsigned int cmd) +{ + char *dir; + + switch (_IOC_DIR(cmd)) { + case _IOC_NONE: dir = "--"; break; + case _IOC_READ: dir = "r-"; break; + case _IOC_WRITE: dir = "-w"; break; + case _IOC_READ | _IOC_WRITE: dir = "rw"; break; + default: dir = "??"; break; + } + switch (_IOC_TYPE(cmd)) { + case 'v': + printk(KERN_DEBUG "%s: ioctl 0x%08x (v4l1, %s, VIDIOC%s)\n", + name, cmd, dir, (_IOC_NR(cmd) < V4L1_IOCTLS) ? + v4l1_ioctls[_IOC_NR(cmd)] : "???"); + break; + case 'V': + printk(KERN_DEBUG "%s: ioctl 0x%08x (v4l2, %s, VIDIOC_%s)\n", + name, cmd, dir, (_IOC_NR(cmd) < V4L2_IOCTLS) ? + v4l2_ioctls[_IOC_NR(cmd)] : "???"); + break; + default: + printk(KERN_DEBUG "%s: ioctl 0x%08x (???, %s, #%d)\n", + name, cmd, dir, _IOC_NR(cmd)); + } +} + +static void *rvmalloc(size_t size) +{ + void *mem; + unsigned long adr; + + size = PAGE_ALIGN(size); + + mem = vmalloc_32((unsigned long)size); + if (!mem) + return NULL; + + memset(mem, 0, size); + + adr = (unsigned long)mem; + while (size > 0) { + SetPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + return mem; +} + +static void rvfree(void *mem, size_t size) +{ + unsigned long adr; + + if (!mem) + return; + + size = PAGE_ALIGN(size); + + adr = (unsigned long)mem; + while (size > 0) { + ClearPageReserved(vmalloc_to_page((void *)adr)); + adr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vfree(mem); +} + +/* + * em28xx_request_buffers() + * allocate a number of buffers + */ +u32 em28xx_request_buffers(struct em28xx *dev, u32 count) +{ + const size_t imagesize = PAGE_ALIGN(dev->frame_size); /*needs to be page aligned cause the buffers can be mapped individually! */ + void *buff = NULL; + u32 i; + em28xx_coredbg("requested %i buffers with size %i", count, imagesize); + if (count > EM28XX_NUM_FRAMES) + count = EM28XX_NUM_FRAMES; + + dev->num_frames = count; + while (dev->num_frames > 0) { + if ((buff = rvmalloc(dev->num_frames * imagesize))) + break; + dev->num_frames--; + } + + for (i = 0; i < dev->num_frames; i++) { + dev->frame[i].bufmem = buff + i * imagesize; + dev->frame[i].buf.index = i; + dev->frame[i].buf.m.offset = i * imagesize; + dev->frame[i].buf.length = dev->frame_size; + dev->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + dev->frame[i].buf.sequence = 0; + dev->frame[i].buf.field = V4L2_FIELD_NONE; + dev->frame[i].buf.memory = V4L2_MEMORY_MMAP; + dev->frame[i].buf.flags = 0; + } + return dev->num_frames; +} + +/* + * em28xx_queue_unusedframes() + * add all frames that are not currently in use to the inbuffer queue + */ +void em28xx_queue_unusedframes(struct em28xx *dev) +{ + unsigned long lock_flags; + u32 i; + + for (i = 0; i < dev->num_frames; i++) + if (dev->frame[i].state == F_UNUSED) { + dev->frame[i].state = F_QUEUED; + spin_lock_irqsave(&dev->queue_lock, lock_flags); + list_add_tail(&dev->frame[i].frame, &dev->inqueue); + spin_unlock_irqrestore(&dev->queue_lock, lock_flags); + } +} + +/* + * em28xx_release_buffers() + * free frame buffers + */ +void em28xx_release_buffers(struct em28xx *dev) +{ + if (dev->num_frames) { + rvfree(dev->frame[0].bufmem, + dev->num_frames * PAGE_ALIGN(dev->frame[0].buf.length)); + dev->num_frames = 0; + } +} + +/* + * em28xx_read_reg_req() + * reads data from the usb device specifying bRequest + */ +int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg, + char *buf, int len) +{ + int ret, byte; + + em28xx_regdbg("req=%02x, reg=%02x ", req, reg); + + ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x0000, reg, buf, len, HZ); + + if (reg_debug){ + printk(ret < 0 ? " failed!\n" : "%02x values: ", ret); + for (byte = 0; byte < len; byte++) { + printk(" %02x", buf[byte]); + } + printk("\n"); + } + + return ret; +} + +/* + * em28xx_read_reg_req() + * reads data from the usb device specifying bRequest + */ +int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg) +{ + u8 val; + int ret; + + em28xx_regdbg("req=%02x, reg=%02x:", req, reg); + + ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x0000, reg, &val, 1, HZ); + + if (reg_debug) + printk(ret < 0 ? " failed!\n" : "%02x\n", val); + + if (ret < 0) + return ret; + + return val; +} + +int em28xx_read_reg(struct em28xx *dev, u16 reg) +{ + return em28xx_read_reg_req(dev, USB_REQ_GET_STATUS, reg); +} + +/* + * em28xx_write_regs_req() + * sends data to the usb device, specifying bRequest + */ +int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, + int len) +{ + int ret; + + /*usb_control_msg seems to expect a kmalloced buffer */ + unsigned char *bufs = kmalloc(len, GFP_KERNEL); + + em28xx_regdbg("req=%02x reg=%02x:", req, reg); + + if (reg_debug) { + int i; + for (i = 0; i < len; ++i) + printk (" %02x", (unsigned char)buf[i]); + printk ("\n"); + } + + if (!bufs) + return -ENOMEM; + memcpy(bufs, buf, len); + ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x0000, reg, bufs, len, HZ); + mdelay(5); /* FIXME: magic number */ + kfree(bufs); + return ret; +} + +int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len) +{ + return em28xx_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len); +} + +/* + * em28xx_write_reg_bits() + * sets only some bits (specified by bitmask) of a register, by first reading + * the actual value + */ +int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val, + u8 bitmask) +{ + int oldval; + u8 newval; + if ((oldval = em28xx_read_reg(dev, reg)) < 0) + return oldval; + newval = (((u8) oldval) & ~bitmask) | (val & bitmask); + return em28xx_write_regs(dev, reg, &newval, 1); +} + +/* + * em28xx_write_ac97() + * write a 16 bit value to the specified AC97 address (LSB first!) + */ +int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 * val) +{ + int ret; + u8 addr = reg & 0x7f; + if ((ret = em28xx_write_regs(dev, AC97LSB_REG, val, 2)) < 0) + return ret; + if ((ret = em28xx_write_regs(dev, AC97ADDR_REG, &addr, 1)) < 0) + return ret; + if ((ret = em28xx_read_reg(dev, AC97BUSY_REG)) < 0) + return ret; + else if (((u8) ret) & 0x01) { + em28xx_warn ("AC97 command still being exectuted: not handled properly!\n"); + } + return 0; +} + +int em28xx_audio_analog_set(struct em28xx *dev) +{ + char s[2] = { 0x00, 0x00 }; + s[0] |= 0x1f - dev->volume; + s[1] |= 0x1f - dev->volume; + if (dev->mute) + s[1] |= 0x80; + return em28xx_write_ac97(dev, MASTER_AC97, s); +} + + +int em28xx_colorlevels_set_default(struct em28xx *dev) +{ + em28xx_write_regs(dev, YGAIN_REG, "\x10", 1); /* contrast */ + em28xx_write_regs(dev, YOFFSET_REG, "\x00", 1); /* brightness */ + em28xx_write_regs(dev, UVGAIN_REG, "\x10", 1); /* saturation */ + em28xx_write_regs(dev, UOFFSET_REG, "\x00", 1); + em28xx_write_regs(dev, VOFFSET_REG, "\x00", 1); + em28xx_write_regs(dev, SHARPNESS_REG, "\x00", 1); + + em28xx_write_regs(dev, GAMMA_REG, "\x20", 1); + em28xx_write_regs(dev, RGAIN_REG, "\x20", 1); + em28xx_write_regs(dev, GGAIN_REG, "\x20", 1); + em28xx_write_regs(dev, BGAIN_REG, "\x20", 1); + em28xx_write_regs(dev, ROFFSET_REG, "\x00", 1); + em28xx_write_regs(dev, GOFFSET_REG, "\x00", 1); + return em28xx_write_regs(dev, BOFFSET_REG, "\x00", 1); +} + +int em28xx_capture_start(struct em28xx *dev, int start) +{ + int ret; + /* FIXME: which is the best order? */ + /* video registers are sampled by VREF */ + if ((ret = em28xx_write_reg_bits(dev, USBSUSP_REG, start ? 0x10 : 0x00, + 0x10)) < 0) + return ret; + /* enable video capture */ + return em28xx_write_regs(dev, VINENABLE_REG, start ? "\x67" : "\x27", 1); +} + +int em28xx_outfmt_set_yuv422(struct em28xx *dev) +{ + em28xx_write_regs(dev, OUTFMT_REG, "\x34", 1); + em28xx_write_regs(dev, VINMODE_REG, "\x10", 1); + return em28xx_write_regs(dev, VINCTRL_REG, "\x11", 1); +} + +int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax, u8 ymin, + u8 ymax) +{ + em28xx_coredbg("em28xx Scale: (%d,%d)-(%d,%d)\n", xmin, ymin, xmax, ymax); + + em28xx_write_regs(dev, XMIN_REG, &xmin, 1); + em28xx_write_regs(dev, XMAX_REG, &xmax, 1); + em28xx_write_regs(dev, YMIN_REG, &ymin, 1); + return em28xx_write_regs(dev, YMAX_REG, &ymax, 1); +} + +int em28xx_capture_area_set(struct em28xx *dev, u8 hstart, u8 vstart, + u16 width, u16 height) +{ + u8 cwidth = width; + u8 cheight = height; + u8 overflow = (height >> 7 & 0x02) | (width >> 8 & 0x01); + + em28xx_coredbg("em28xx Area Set: (%d,%d)\n", (width | (overflow & 2) << 7), + (height | (overflow & 1) << 8)); + + em28xx_write_regs(dev, HSTART_REG, &hstart, 1); + em28xx_write_regs(dev, VSTART_REG, &vstart, 1); + em28xx_write_regs(dev, CWIDTH_REG, &cwidth, 1); + em28xx_write_regs(dev, CHEIGHT_REG, &cheight, 1); + return em28xx_write_regs(dev, OFLOW_REG, &overflow, 1); +} + +int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v) +{ + u8 mode; + /* the em2800 scaler only supports scaling down to 50% */ + if(dev->is_em2800) + mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00); + else { + u8 buf[2]; + buf[0] = h; + buf[1] = h >> 8; + em28xx_write_regs(dev, HSCALELOW_REG, (char *)buf, 2); + buf[0] = v; + buf[1] = v >> 8; + em28xx_write_regs(dev, VSCALELOW_REG, (char *)buf, 2); + /* it seems that both H and V scalers must be active to work correctly */ + mode = (h || v)? 0x30: 0x00; + } + return em28xx_write_reg_bits(dev, COMPR_REG, mode, 0x30); +} + +/* FIXME: this only function read values from dev */ +int em28xx_resolution_set(struct em28xx *dev) +{ + int width, height; + width = norm_maxw(dev); + height = norm_maxh(dev) >> 1; + + em28xx_outfmt_set_yuv422(dev); + em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2); + em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2); + return em28xx_scaler_set(dev, dev->hscale, dev->vscale); +} + + +/******************* isoc transfer handling ****************************/ + +#ifdef ENABLE_DEBUG_ISOC_FRAMES +static void em28xx_isoc_dump(struct urb *urb, struct pt_regs *regs) +{ + int len = 0; + int ntrans = 0; + int i; + + printk(KERN_DEBUG "isocIrq: sf=%d np=%d ec=%x\n", + urb->start_frame, urb->number_of_packets, + urb->error_count); + for (i = 0; i < urb->number_of_packets; i++) { + unsigned char *buf = + urb->transfer_buffer + + urb->iso_frame_desc[i].offset; + int alen = urb->iso_frame_desc[i].actual_length; + if (alen > 0) { + if (buf[0] == 0x88) { + ntrans++; + len += alen; + } else if (buf[0] == 0x22) { + printk(KERN_DEBUG + "= l=%d nt=%d bpp=%d\n", + len - 4 * ntrans, ntrans, + ntrans == 0 ? 0 : len / ntrans); + ntrans = 1; + len = alen; + } else + printk(KERN_DEBUG "!\n"); + } + printk(KERN_DEBUG " n=%d s=%d al=%d %x\n", i, + urb->iso_frame_desc[i].status, + urb->iso_frame_desc[i].actual_length, + (unsigned int) + *((unsigned char *)(urb->transfer_buffer + + urb->iso_frame_desc[i]. + offset))); + } +} +#endif + +static inline int em28xx_isoc_video(struct em28xx *dev,struct em28xx_frame_t **f, + unsigned long *lock_flags, unsigned char buf) +{ + if (!(buf & 0x01)) { + if ((*f)->state == F_GRABBING) { + /*previous frame is incomplete */ + if ((*f)->fieldbytesused < dev->field_size) { + (*f)->state = F_ERROR; + em28xx_isocdbg ("dropping incomplete bottom field (%i missing bytes)", + dev->field_size-(*f)->fieldbytesused); + } else { + (*f)->state = F_DONE; + (*f)->buf.bytesused = dev->frame_size; + } + } + if ((*f)->state == F_DONE || (*f)->state == F_ERROR) { + /* move current frame to outqueue and get next free buffer from inqueue */ + spin_lock_irqsave(&dev-> queue_lock, *lock_flags); + list_move_tail(&(*f)->frame, &dev->outqueue); + if (!list_empty(&dev->inqueue)) + (*f) = list_entry(dev-> inqueue.next, + struct em28xx_frame_t,frame); + else + (*f) = NULL; + spin_unlock_irqrestore(&dev->queue_lock,*lock_flags); + } + if (!(*f)) { + em28xx_isocdbg ("new frame but no buffer is free"); + return -1; + } + do_gettimeofday(&(*f)->buf.timestamp); + (*f)->buf.sequence = ++dev->frame_count; + (*f)->buf.field = V4L2_FIELD_INTERLACED; + (*f)->state = F_GRABBING; + (*f)->buf.bytesused = 0; + (*f)->top_field = 1; + (*f)->fieldbytesused = 0; + } else { + /* acquiring bottom field */ + if ((*f)->state == F_GRABBING) { + if (!(*f)->top_field) { + (*f)->state = F_ERROR; + em28xx_isocdbg ("unexpected begin of bottom field; discarding it"); + } else if ((*f)-> fieldbytesused < dev->field_size - 172) { + (*f)->state = F_ERROR; + em28xx_isocdbg ("dropping incomplete top field (%i missing bytes)", + dev->field_size-(*f)->fieldbytesused); + } else { + (*f)->top_field = 0; + (*f)->fieldbytesused = 0; + } + } + } + return (0); +} + +static inline void em28xx_isoc_video_copy(struct em28xx *dev, + struct em28xx_frame_t **f, unsigned char *buf, int len) +{ + void *fieldstart, *startwrite, *startread; + int linesdone, currlinedone, offset, lencopy,remain; + + if(dev->frame_size != (*f)->buf.length){ + em28xx_err("frame_size %i and buf.length %i are different!!!\n",dev->frame_size,(*f)->buf.length); + return; + } + + if ((*f)->fieldbytesused + len > dev->field_size) + len =dev->field_size - (*f)->fieldbytesused; + + if (buf[0] != 0x88 && buf[0] != 0x22) { + em28xx_isocdbg("frame is not complete\n"); + startread = buf; + len+=4; + } else + startread = buf + 4; + + remain = len; + + if ((*f)->top_field) + fieldstart = (*f)->bufmem; + else + fieldstart = (*f)->bufmem + dev->bytesperline; + + linesdone = (*f)->fieldbytesused / dev->bytesperline; + currlinedone = (*f)->fieldbytesused % dev->bytesperline; + offset = linesdone * dev->bytesperline * 2 + currlinedone; + startwrite = fieldstart + offset; + lencopy = dev->bytesperline - currlinedone; + lencopy = lencopy > remain ? remain : lencopy; + + memcpy(startwrite, startread, lencopy); + remain -= lencopy; + + while (remain > 0) { + startwrite += lencopy + dev->bytesperline; + startread += lencopy; + if (dev->bytesperline > remain) + lencopy = remain; + else + lencopy = dev->bytesperline; + + memcpy(startwrite, startread, lencopy); + remain -= lencopy; + } + + (*f)->fieldbytesused += len; +} + +/* + * em28xx_isoIrq() + * handles the incoming isoc urbs and fills the frames from our inqueue + */ +void em28xx_isocIrq(struct urb *urb, struct pt_regs *regs) +{ + struct em28xx *dev = urb->context; + int i, status; + struct em28xx_frame_t **f; + unsigned long lock_flags; + + if (!dev) + return; +#ifdef ENABLE_DEBUG_ISOC_FRAMES + if (isoc_debug>1) + em28xx_isoc_dump(urb, regs); +#endif + + if (urb->status == -ENOENT) + return; + + f = &dev->frame_current; + + if (dev->stream == STREAM_INTERRUPT) { + dev->stream = STREAM_OFF; + if ((*f)) + (*f)->state = F_QUEUED; + em28xx_isocdbg("stream interrupted"); + wake_up_interruptible(&dev->wait_stream); + } + + if ((dev->state & DEV_DISCONNECTED) || (dev->state & DEV_MISCONFIGURED)) + return; + + if (dev->stream == STREAM_ON && !list_empty(&dev->inqueue)) { + if (!(*f)) + (*f) = list_entry(dev->inqueue.next, + struct em28xx_frame_t, frame); + + for (i = 0; i < urb->number_of_packets; i++) { + unsigned char *buf = urb->transfer_buffer + + urb->iso_frame_desc[i].offset; + int len = urb->iso_frame_desc[i].actual_length - 4; + + if (urb->iso_frame_desc[i].status) { + em28xx_isocdbg("data error: [%d] len=%d, status=%d", i, + urb->iso_frame_desc[i].actual_length, + urb->iso_frame_desc[i].status); + if (urb->iso_frame_desc[i].status != -EPROTO) + continue; + } + if (urb->iso_frame_desc[i].actual_length <= 0) { + em28xx_isocdbg("packet %d is empty",i); + continue; + } + if (urb->iso_frame_desc[i].actual_length > + dev->max_pkt_size) { + em28xx_isocdbg("packet bigger than packet size"); + continue; + } + /*new frame */ + if (buf[0] == 0x22 && buf[1] == 0x5a) { + em28xx_isocdbg("Video frame, length=%i!",len); + + if (em28xx_isoc_video(dev,f,&lock_flags,buf[2])) + break; + } else if (buf[0]==0x33 && buf[1]==0x95 && buf[2]==0x00) { + em28xx_isocdbg("VBI HEADER!!!"); + } + + /* actual copying */ + if ((*f)->state == F_GRABBING) { + em28xx_isoc_video_copy(dev,f,buf, len); + } + } + } + + for (i = 0; i < urb->number_of_packets; i++) { + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + + urb->status = 0; + if ((status = usb_submit_urb(urb, GFP_ATOMIC))) { + em28xx_errdev("resubmit of urb failed (error=%i)\n", status); + dev->state |= DEV_MISCONFIGURED; + } + wake_up_interruptible(&dev->wait_frame); + return; +} + +/* + * em28xx_uninit_isoc() + * deallocates the buffers and urbs allocated during em28xx_init_iosc() + */ +void em28xx_uninit_isoc(struct em28xx *dev) +{ + int i; + + for (i = 0; i < EM28XX_NUM_BUFS; i++) { + if (dev->urb[i]) { + usb_kill_urb(dev->urb[i]); + if (dev->transfer_buffer[i]){ + usb_buffer_free(dev->udev,(EM28XX_NUM_PACKETS*dev->max_pkt_size),dev->transfer_buffer[i],dev->urb[i]->transfer_dma); + } + usb_free_urb(dev->urb[i]); + } + dev->urb[i] = NULL; + dev->transfer_buffer[i] = NULL; + } + em28xx_capture_start(dev, 0); +} + +/* + * em28xx_init_isoc() + * allocates transfer buffers and submits the urbs for isoc transfer + */ +int em28xx_init_isoc(struct em28xx *dev) +{ + /* change interface to 3 which allowes the biggest packet sizes */ + int i, errCode; + const int sb_size = EM28XX_NUM_PACKETS * dev->max_pkt_size; + + /* reset streaming vars */ + dev->frame_current = NULL; + dev->frame_count = 0; + + /* allocate urbs */ + for (i = 0; i < EM28XX_NUM_BUFS; i++) { + struct urb *urb; + int j, k; + /* allocate transfer buffer */ + urb = usb_alloc_urb(EM28XX_NUM_PACKETS, GFP_KERNEL); + if (!urb){ + em28xx_errdev("cannot alloc urb %i\n", i); + em28xx_uninit_isoc(dev); + return -ENOMEM; + } + dev->transfer_buffer[i] = usb_buffer_alloc(dev->udev, sb_size, GFP_KERNEL,&urb->transfer_dma); + if (!dev->transfer_buffer[i]) { + em28xx_errdev + ("unable to allocate %i bytes for transfer buffer %i\n", + sb_size, i); + em28xx_uninit_isoc(dev); + return -ENOMEM; + } + memset(dev->transfer_buffer[i], 0, sb_size); + urb->dev = dev->udev; + urb->context = dev; + urb->pipe = usb_rcvisocpipe(dev->udev, 0x82); + urb->transfer_flags = URB_ISO_ASAP; + urb->interval = 1; + urb->transfer_buffer = dev->transfer_buffer[i]; + urb->complete = em28xx_isocIrq; + urb->number_of_packets = EM28XX_NUM_PACKETS; + urb->transfer_buffer_length = sb_size; + for (j = k = 0; j < EM28XX_NUM_PACKETS; + j++, k += dev->max_pkt_size) { + urb->iso_frame_desc[j].offset = k; + urb->iso_frame_desc[j].length = + dev->max_pkt_size; + } + dev->urb[i] = urb; + } + + /* submit urbs */ + for (i = 0; i < EM28XX_NUM_BUFS; i++) { + errCode = usb_submit_urb(dev->urb[i], GFP_KERNEL); + if (errCode) { + em28xx_errdev("submit of urb %i failed (error=%i)\n", i, + errCode); + em28xx_uninit_isoc(dev); + return errCode; + } + } + + return 0; +} + +int em28xx_set_alternate(struct em28xx *dev) +{ + int errCode, prev_alt = dev->alt; + dev->alt = alt; + if (dev->alt == 0) { + int i; + for(i=0;i< dev->num_alt; i++) + if(dev->alt_max_pkt_size[i]>dev->alt_max_pkt_size[dev->alt]) + dev->alt=i; + } + + if (dev->alt != prev_alt) { + dev->max_pkt_size = dev->alt_max_pkt_size[dev->alt]; + em28xx_coredbg("setting alternate %d with wMaxPacketSize=%u\n", dev->alt, + dev->max_pkt_size); + errCode = usb_set_interface(dev->udev, 0, dev->alt); + if (errCode < 0) { + em28xx_errdev ("cannot change alternate number to %d (error=%i)\n", + dev->alt, errCode); + return errCode; + } + } + return 0; +} diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c new file mode 100644 index 000000000000..b32d9852f34c --- /dev/null +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -0,0 +1,586 @@ +/* + em28xx-i2c.c - driver for Empia EM2800/EM2820/2840 USB video capture devices + + Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> + Markus Rechberger <mrechberger@gmail.com> + Mauro Carvalho Chehab <mchehab@brturbo.com.br> + Sascha Sommer <saschasommer@freenet.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/usb.h> +#include <linux/i2c.h> +#include <linux/video_decoder.h> + +#include "em28xx.h" +#include <media/tuner.h> + +/* ----------------------------------------------------------- */ + +static unsigned int i2c_scan = 0; +module_param(i2c_scan, int, 0444); +MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); + +static unsigned int i2c_debug = 0; +module_param(i2c_debug, int, 0644); +MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); + +#define dprintk1(lvl,fmt, args...) if (i2c_debug>=lvl) do {\ + printk(fmt , ##args); } while (0) +#define dprintk2(lvl,fmt, args...) if (i2c_debug>=lvl) do{ \ + printk(KERN_DEBUG "%s at %s: " fmt, \ + dev->name, __FUNCTION__ , ##args); } while (0) + +/* + * em2800_i2c_send_max4() + * send up to 4 bytes to the i2c device + */ +static int em2800_i2c_send_max4(struct em28xx *dev, unsigned char addr, + char *buf, int len) +{ + int ret; + int write_timeout; + unsigned char b2[6]; + BUG_ON(len < 1 || len > 4); + b2[5] = 0x80 + len - 1; + b2[4] = addr; + b2[3] = buf[0]; + if (len > 1) + b2[2] = buf[1]; + if (len > 2) + b2[1] = buf[2]; + if (len > 3) + b2[0] = buf[3]; + + ret = dev->em28xx_write_regs(dev, 4 - len, &b2[4 - len], 2 + len); + if (ret != 2 + len) { + em28xx_warn("writting to i2c device failed (error=%i)\n", ret); + return -EIO; + } + for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0; + write_timeout -= 5) { + ret = dev->em28xx_read_reg(dev, 0x05); + if (ret == 0x80 + len - 1) + return len; + mdelay(5); + } + em28xx_warn("i2c write timed out\n"); + return -EIO; +} + +/* + * em2800_i2c_send_bytes() + */ +static int em2800_i2c_send_bytes(void *data, unsigned char addr, char *buf, + short len) +{ + char *bufPtr = buf; + int ret; + int wrcount = 0; + int count; + int maxLen = 4; + struct em28xx *dev = (struct em28xx *)data; + while (len > 0) { + count = (len > maxLen) ? maxLen : len; + ret = em2800_i2c_send_max4(dev, addr, bufPtr, count); + if (ret > 0) { + len -= count; + bufPtr += count; + wrcount += count; + } else + return (ret < 0) ? ret : -EFAULT; + } + return wrcount; +} + +/* + * em2800_i2c_check_for_device() + * check if there is a i2c_device at the supplied address + */ +static int em2800_i2c_check_for_device(struct em28xx *dev, unsigned char addr) +{ + char msg; + int ret; + int write_timeout; + msg = addr; + ret = dev->em28xx_write_regs(dev, 0x04, &msg, 1); + if (ret < 0) { + em28xx_warn("setting i2c device address failed (error=%i)\n", + ret); + return ret; + } + msg = 0x84; + ret = dev->em28xx_write_regs(dev, 0x05, &msg, 1); + if (ret < 0) { + em28xx_warn("preparing i2c read failed (error=%i)\n", ret); + return ret; + } + for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0; + write_timeout -= 5) { + unsigned msg = dev->em28xx_read_reg(dev, 0x5); + if (msg == 0x94) + return -ENODEV; + else if (msg == 0x84) + return 0; + mdelay(5); + } + return -ENODEV; +} + +/* + * em2800_i2c_recv_bytes() + * read from the i2c device + */ +static int em2800_i2c_recv_bytes(struct em28xx *dev, unsigned char addr, + char *buf, int len) +{ + int ret; + /* check for the device and set i2c read address */ + ret = em2800_i2c_check_for_device(dev, addr); + if (ret) { + em28xx_warn + ("preparing read at i2c address 0x%x failed (error=%i)\n", + addr, ret); + return ret; + } + ret = dev->em28xx_read_reg_req_len(dev, 0x0, 0x3, buf, len); + if (ret < 0) { + em28xx_warn("reading from i2c device at 0x%x failed (error=%i)", + addr, ret); + return ret; + } + return ret; +} + +/* + * em28xx_i2c_send_bytes() + * untested for more than 4 bytes + */ +static int em28xx_i2c_send_bytes(void *data, unsigned char addr, char *buf, + short len, int stop) +{ + int wrcount = 0; + struct em28xx *dev = (struct em28xx *)data; + + wrcount = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len); + + return wrcount; +} + +/* + * em28xx_i2c_recv_bytes() + * read a byte from the i2c device + */ +static int em28xx_i2c_recv_bytes(struct em28xx *dev, unsigned char addr, + char *buf, int len) +{ + int ret; + ret = dev->em28xx_read_reg_req_len(dev, 2, addr, buf, len); + if (ret < 0) { + em28xx_warn("reading i2c device failed (error=%i)\n", ret); + return ret; + } + if (dev->em28xx_read_reg(dev, 0x5) != 0) + return -ENODEV; + return ret; +} + +/* + * em28xx_i2c_check_for_device() + * check if there is a i2c_device at the supplied address + */ +static int em28xx_i2c_check_for_device(struct em28xx *dev, unsigned char addr) +{ + char msg; + int ret; + msg = addr; + + ret = dev->em28xx_read_reg_req(dev, 2, addr); + if (ret < 0) { + em28xx_warn("reading from i2c device failed (error=%i)\n", ret); + return ret; + } + if (dev->em28xx_read_reg(dev, 0x5) != 0) + return -ENODEV; + return 0; +} + +/* + * em28xx_i2c_xfer() + * the main i2c transfer function + */ +static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msgs[], int num) +{ + struct em28xx *dev = i2c_adap->algo_data; + int addr, rc, i, byte; + + if (num <= 0) + return 0; + for (i = 0; i < num; i++) { + addr = msgs[i].addr << 1; + dprintk2(2,"%s %s addr=%x len=%d:", + (msgs[i].flags & I2C_M_RD) ? "read" : "write", + i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len); + if (!msgs[i].len) { /* no len: check only for device presence */ + if (dev->is_em2800) + rc = em2800_i2c_check_for_device(dev, addr); + else + rc = em28xx_i2c_check_for_device(dev, addr); + if (rc < 0) { + dprintk2(2," no device\n"); + return rc; + } + + } else if (msgs[i].flags & I2C_M_RD) { + /* read bytes */ + if (dev->is_em2800) + rc = em2800_i2c_recv_bytes(dev, addr, + msgs[i].buf, + msgs[i].len); + else + rc = em28xx_i2c_recv_bytes(dev, addr, + msgs[i].buf, + msgs[i].len); + if (i2c_debug>=2) { + for (byte = 0; byte < msgs[i].len; byte++) { + printk(" %02x", msgs[i].buf[byte]); + } + } + } else { + /* write bytes */ + if (i2c_debug>=2) { + for (byte = 0; byte < msgs[i].len; byte++) + printk(" %02x", msgs[i].buf[byte]); + } + if (dev->is_em2800) + rc = em2800_i2c_send_bytes(dev, addr, + msgs[i].buf, + msgs[i].len); + else + rc = em28xx_i2c_send_bytes(dev, addr, + msgs[i].buf, + msgs[i].len, + i == num - 1); + if (rc < 0) + goto err; + } + if (i2c_debug>=2) + printk("\n"); + } + + return num; + err: + dprintk2(2," ERROR: %i\n", rc); + return rc; +} + +static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len) +{ + unsigned char buf, *p = eedata; + struct em28xx_eeprom *em_eeprom = (void *)eedata; + int i, err, size = len, block; + + dev->i2c_client.addr = 0xa0 >> 1; + + /* Check if board has eeprom */ + err = i2c_master_recv(&dev->i2c_client, &buf, 0); + if (err < 0) + return -1; + + buf = 0; + if (1 != (err = i2c_master_send(&dev->i2c_client, &buf, 1))) { + printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n", + dev->name, err); + return -1; + } + while (size > 0) { + if (size > 16) + block = 16; + else + block = size; + + if (block != + (err = i2c_master_recv(&dev->i2c_client, p, block))) { + printk(KERN_WARNING + "%s: i2c eeprom read error (err=%d)\n", + dev->name, err); + return -1; + } + size -= block; + p += block; + } + for (i = 0; i < len; i++) { + if (0 == (i % 16)) + printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i); + printk(" %02x", eedata[i]); + if (15 == (i % 16)) + printk("\n"); + } + + printk(KERN_INFO "EEPROM ID= 0x%08x\n", em_eeprom->id); + printk(KERN_INFO "Vendor/Product ID= %04x:%04x\n", em_eeprom->vendor_ID, + em_eeprom->product_ID); + + switch (em_eeprom->chip_conf >> 4 & 0x3) { + case 0: + printk(KERN_INFO "No audio on board.\n"); + break; + case 1: + printk(KERN_INFO "AC97 audio (5 sample rates)\n"); + break; + case 2: + printk(KERN_INFO "I2S audio, sample rate=32k\n"); + break; + case 3: + printk(KERN_INFO "I2S audio, 3 sample rates\n"); + break; + } + + if (em_eeprom->chip_conf & 1 << 3) + printk(KERN_INFO "USB Remote wakeup capable\n"); + + if (em_eeprom->chip_conf & 1 << 2) + printk(KERN_INFO "USB Self power capable\n"); + + switch (em_eeprom->chip_conf & 0x3) { + case 0: + printk(KERN_INFO "500mA max power\n"); + break; + case 1: + printk(KERN_INFO "400mA max power\n"); + break; + case 2: + printk(KERN_INFO "300mA max power\n"); + break; + case 3: + printk(KERN_INFO "200mA max power\n"); + break; + } + printk(KERN_INFO "Table at 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n", + em_eeprom->string_idx_table,em_eeprom->string1, + em_eeprom->string2,em_eeprom->string3); + + return 0; +} + +/* ----------------------------------------------------------- */ + +/* + * algo_control() + */ +static int algo_control(struct i2c_adapter *adapter, + unsigned int cmd, unsigned long arg) +{ + return 0; +} + +/* + * functionality() + */ +static u32 functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL; +} + +#ifndef I2C_PEC +static void inc_use(struct i2c_adapter *adap) +{ + MOD_INC_USE_COUNT; +} + +static void dec_use(struct i2c_adapter *adap) +{ + MOD_DEC_USE_COUNT; +} +#endif + +static int em28xx_set_tuner(int check_eeprom, struct i2c_client *client) +{ + struct em28xx *dev = client->adapter->algo_data; + struct tuner_setup tun_setup; + + if (dev->has_tuner) { + tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; + tun_setup.type = dev->tuner_type; + tun_setup.addr = dev->tuner_addr; + + em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup); + } + + return (0); +} + +/* + * attach_inform() + * gets called when a device attaches to the i2c bus + * does some basic configuration + */ +static int attach_inform(struct i2c_client *client) +{ + struct em28xx *dev = client->adapter->algo_data; + + switch (client->addr << 1) { + case 0x86: + em28xx_i2c_call_clients(dev, TDA9887_SET_CONFIG, &dev->tda9887_conf); + break; + case 0x42: + dprintk1(1,"attach_inform: saa7114 detected.\n"); + break; + case 0x4a: + dprintk1(1,"attach_inform: saa7113 detected.\n"); + break; + case 0xa0: + dprintk1(1,"attach_inform: eeprom detected.\n"); + break; + case 0x60: + case 0x8e: + { + struct IR_i2c *ir = i2c_get_clientdata(client); + dprintk1(1,"attach_inform: IR detected (%s).\n",ir->phys); + em28xx_set_ir(dev,ir); + break; + } + case 0x80: + case 0x88: + dprintk1(1,"attach_inform: msp34xx detected.\n"); + break; + case 0xb8: + case 0xba: + dprintk1(1,"attach_inform: tvp5150 detected.\n"); + break; + default: + dprintk1(1,"attach inform: detected I2C address %x\n", client->addr << 1); + dev->tuner_addr = client->addr; + em28xx_set_tuner(-1, client); + } + + return 0; +} + +static struct i2c_algorithm em28xx_algo = { + .master_xfer = em28xx_i2c_xfer, + .algo_control = algo_control, + .functionality = functionality, +}; + +static struct i2c_adapter em28xx_adap_template = { +#ifdef I2C_PEC + .owner = THIS_MODULE, +#else + .inc_use = inc_use, + .dec_use = dec_use, +#endif +#ifdef I2C_CLASS_TV_ANALOG + .class = I2C_CLASS_TV_ANALOG, +#endif + .name = "em28xx", + .id = I2C_HW_B_EM28XX, + .algo = &em28xx_algo, + .client_register = attach_inform, +}; + +static struct i2c_client em28xx_client_template = { + .name = "em28xx internal", + .flags = I2C_CLIENT_ALLOW_USE, +}; + +/* ----------------------------------------------------------- */ + +/* + * i2c_devs + * incomplete list of known devices + */ +static char *i2c_devs[128] = { + [0x4a >> 1] = "saa7113h", + [0x60 >> 1] = "remote IR sensor", + [0x8e >> 1] = "remote IR sensor", + [0x86 >> 1] = "tda9887", + [0x80 >> 1] = "msp34xx", + [0x88 >> 1] = "msp34xx", + [0xa0 >> 1] = "eeprom", + [0xb8 >> 1] = "tvp5150a", + [0xba >> 1] = "tvp5150a", + [0xc0 >> 1] = "tuner (analog)", + [0xc2 >> 1] = "tuner (analog)", + [0xc4 >> 1] = "tuner (analog)", + [0xc6 >> 1] = "tuner (analog)", +}; + +/* + * do_i2c_scan() + * check i2c address range for devices + */ +static void do_i2c_scan(char *name, struct i2c_client *c) +{ + unsigned char buf; + int i, rc; + + for (i = 0; i < 128; i++) { + c->addr = i; + rc = i2c_master_recv(c, &buf, 0); + if (rc < 0) + continue; + printk(KERN_INFO "%s: found i2c device @ 0x%x [%s]\n", name, + i << 1, i2c_devs[i] ? i2c_devs[i] : "???"); + } +} + +/* + * em28xx_i2c_call_clients() + * send commands to all attached i2c devices + */ +void em28xx_i2c_call_clients(struct em28xx *dev, unsigned int cmd, void *arg) +{ + BUG_ON(NULL == dev->i2c_adap.algo_data); + i2c_clients_command(&dev->i2c_adap, cmd, arg); +} + +/* + * em28xx_i2c_register() + * register i2c bus + */ +int em28xx_i2c_register(struct em28xx *dev) +{ + BUG_ON(!dev->em28xx_write_regs || !dev->em28xx_read_reg); + BUG_ON(!dev->em28xx_write_regs_req || !dev->em28xx_read_reg_req); + dev->i2c_adap = em28xx_adap_template; + dev->i2c_adap.dev.parent = &dev->udev->dev; + strcpy(dev->i2c_adap.name, dev->name); + dev->i2c_adap.algo_data = dev; + i2c_add_adapter(&dev->i2c_adap); + + dev->i2c_client = em28xx_client_template; + dev->i2c_client.adapter = &dev->i2c_adap; + + em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata)); + + if (i2c_scan) + do_i2c_scan(dev->name, &dev->i2c_client); + return 0; +} + +/* + * em28xx_i2c_unregister() + * unregister i2c_bus + */ +int em28xx_i2c_unregister(struct em28xx *dev) +{ + i2c_del_adapter(&dev->i2c_adap); + return 0; +} diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c new file mode 100644 index 000000000000..32c49df58adc --- /dev/null +++ b/drivers/media/video/em28xx/em28xx-input.c @@ -0,0 +1,184 @@ +/* + handle em28xx IR remotes via linux kernel input layer. + + Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> + Markus Rechberger <mrechberger@gmail.com> + Mauro Carvalho Chehab <mchehab@brturbo.com.br> + Sascha Sommer <saschasommer@freenet.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/usb.h> + +#include "em28xx.h" + +static unsigned int disable_ir = 0; +module_param(disable_ir, int, 0444); +MODULE_PARM_DESC(disable_ir,"disable infrared remote support"); + +static unsigned int ir_debug = 0; +module_param(ir_debug, int, 0644); +MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]"); + +#define dprintk(fmt, arg...) if (ir_debug) \ + printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg) + +/* ---------------------------------------------------------------------- */ + +static IR_KEYTAB_TYPE ir_codes_em_terratec[IR_KEYTAB_SIZE] = { + [ 0x01 ] = KEY_CHANNEL, + [ 0x02 ] = KEY_SELECT, + [ 0x03 ] = KEY_MUTE, + [ 0x04 ] = KEY_POWER, + [ 0x05 ] = KEY_KP1, + [ 0x06 ] = KEY_KP2, + [ 0x07 ] = KEY_KP3, + [ 0x08 ] = KEY_CHANNELUP, + [ 0x09 ] = KEY_KP4, + [ 0x0a ] = KEY_KP5, + [ 0x0b ] = KEY_KP6, + [ 0x0c ] = KEY_CHANNELDOWN, + [ 0x0d ] = KEY_KP7, + [ 0x0e ] = KEY_KP8, + [ 0x0f ] = KEY_KP9, + [ 0x10 ] = KEY_VOLUMEUP, + [ 0x11 ] = KEY_KP0, + [ 0x12 ] = KEY_MENU, + [ 0x13 ] = KEY_PRINT, + [ 0x14 ] = KEY_VOLUMEDOWN, + [ 0x16 ] = KEY_PAUSE, + [ 0x18 ] = KEY_RECORD, + [ 0x19 ] = KEY_REWIND, + [ 0x1a ] = KEY_PLAY, + [ 0x1b ] = KEY_FORWARD, + [ 0x1c ] = KEY_BACKSPACE, + [ 0x1e ] = KEY_STOP, + [ 0x40 ] = KEY_ZOOM, +}; + +/* ----------------------------------------------------------------------- */ + +static int get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char b; + + /* poll IR chip */ + if (1 != i2c_master_recv(&ir->c,&b,1)) { + dprintk("read error\n"); + return -EIO; + } + + /* it seems that 0xFE indicates that a button is still hold + down, while 0xff indicates that no button is hold + down. 0xfe sequences are sometimes interrupted by 0xFF */ + + dprintk("key %02x\n", b); + + if (b == 0xff) + return 0; + + if (b == 0xfe) + /* keep old data */ + return 1; + + *ir_key = b; + *ir_raw = b; + return 1; +} + + +static int get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char buf[2]; + unsigned char code; + + /* poll IR chip */ + if (2 != i2c_master_recv(&ir->c,buf,2)) + return -EIO; + + /* Does eliminate repeated parity code */ + if (buf[1]==0xff) + return 0; + + /* avoid fast reapeating */ + if (buf[1]==ir->old) + return 0; + ir->old=buf[1]; + + /* Rearranges bits to the right order */ + code= ((buf[0]&0x01)<<5) | /* 0010 0000 */ + ((buf[0]&0x02)<<3) | /* 0001 0000 */ + ((buf[0]&0x04)<<1) | /* 0000 1000 */ + ((buf[0]&0x08)>>1) | /* 0000 0100 */ + ((buf[0]&0x10)>>3) | /* 0000 0010 */ + ((buf[0]&0x20)>>5); /* 0000 0001 */ + + dprintk("ir hauppauge (em2840): code=0x%02x (rcv=0x%02x)\n",code,buf[0]); + + /* return key */ + *ir_key = code; + *ir_raw = code; + return 1; +} + +/* ----------------------------------------------------------------------- */ +void em28xx_set_ir(struct em28xx * dev,struct IR_i2c *ir) +{ + if (disable_ir) { + ir->get_key=NULL; + return ; + } + + /* detect & configure */ + switch (dev->model) { + case (EM2800_BOARD_UNKNOWN): + break; + case (EM2820_BOARD_UNKNOWN): + break; + case (EM2800_BOARD_TERRATEC_CINERGY_200): + case (EM2820_BOARD_TERRATEC_CINERGY_250): + ir->ir_codes = ir_codes_em_terratec; + ir->get_key = get_key_terratec; + snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (EM28XX Terratec)"); + break; + case (EM2820_BOARD_PINNACLE_USB_2): + break; + case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2): + ir->ir_codes = ir_codes_hauppauge_new; + ir->get_key = get_key_em_haup; + snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (EM2840 Hauppauge)"); + break; + case (EM2820_BOARD_MSI_VOX_USB_2): + break; + case (EM2800_BOARD_LEADTEK_WINFAST_USBII): + break; + case (EM2800_BOARD_KWORLD_USB2800): + break; + } +} + +/* ---------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c new file mode 100644 index 000000000000..57c1826b928e --- /dev/null +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -0,0 +1,1933 @@ +/* + em28xx-video.c - driver for Empia EM2800/EM2820/2840 USB video capture devices + + Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> + Markus Rechberger <mrechberger@gmail.com> + Mauro Carvalho Chehab <mchehab@brturbo.com.br> + Sascha Sommer <saschasommer@freenet.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/usb.h> +#include <linux/i2c.h> +#include <linux/version.h> +#include <linux/video_decoder.h> + +#include "em28xx.h" +#include <media/tuner.h> + +#define DRIVER_AUTHOR "Ludovico Cavedon <cavedon@sssup.it>, " \ + "Markus Rechberger <mrechberger@gmail.com>, " \ + "Mauro Carvalho Chehab <mchehab@brturbo.com.br>, " \ + "Sascha Sommer <saschasommer@freenet.de>" + +#define DRIVER_NAME "em28xx" +#define DRIVER_DESC "Empia em28xx based USB video device driver" +#define EM28XX_VERSION_CODE KERNEL_VERSION(0, 0, 1) + +#define em28xx_videodbg(fmt, arg...) do {\ + if (video_debug) \ + printk(KERN_INFO "%s %s :"fmt, \ + dev->name, __FUNCTION__ , ##arg); } while (0) + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +static LIST_HEAD(em28xx_devlist); + +static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; +module_param_array(card, int, NULL, 0444); +MODULE_PARM_DESC(card,"card type"); + +static int tuner = -1; +module_param(tuner, int, 0444); +MODULE_PARM_DESC(tuner, "tuner type"); + +static unsigned int video_debug = 0; +module_param(video_debug,int,0644); +MODULE_PARM_DESC(video_debug,"enable debug messages [video]"); + +/* supported tv norms */ +static struct em28xx_tvnorm tvnorms[] = { + { + .name = "PAL", + .id = V4L2_STD_PAL, + .mode = VIDEO_MODE_PAL, + }, { + .name = "NTSC", + .id = V4L2_STD_NTSC, + .mode = VIDEO_MODE_NTSC, + }, { + .name = "SECAM", + .id = V4L2_STD_SECAM, + .mode = VIDEO_MODE_SECAM, + }, { + .name = "PAL-M", + .id = V4L2_STD_PAL_M, + .mode = VIDEO_MODE_PAL, + } +}; + +static const unsigned char saa7114_i2c_init[] = { + 0x00,0x00,0x01,0x08,0x02,0xc4,0x03,0x30,0x04,0x90,0x05,0x90,0x06,0xeb,0x07,0xe0, + 0x08,0x88,0x09,0x40,0x0a,0x80,0x0b,0x44,0x0c,0x40,0x0d,0x00,0x0e,0x81,0x0f,0x2a, + 0x10,0x06,0x11,0x00,0x12,0xc8,0x13,0x80,0x14,0x00,0x15,0x11,0x16,0x01,0x17,0x42, + 0x18,0x40,0x19,0x80,0x40,0x00,0x41,0xff,0x42,0xff,0x43,0xff,0x44,0xff,0x45,0xff, + 0x46,0xff,0x47,0xff,0x48,0xff,0x49,0xff,0x4a,0xff,0x4b,0xff,0x4c,0xff,0x4d,0xff, + 0x4e,0xff,0x4f,0xff,0x50,0xff,0x51,0xff,0x52,0xff,0x53,0xff,0x54,0x5f,0x55,0xff, + 0x56,0xff,0x57,0xff,0x58,0x00,0x59,0x47,0x5a,0x03,0x5b,0x03,0x5d,0x3e,0x5e,0x00, + 0x80,0x1c,0x83,0x01,0x84,0xa5,0x85,0x10,0x86,0x45,0x87,0x41,0x88,0xf0,0x88,0x00, + 0x88,0xf0,0x90,0x00,0x91,0x08,0x92,0x00,0x93,0x80,0x94,0x08,0x95,0x00,0x96,0xc0, + 0x97,0x02,0x98,0x13,0x99,0x00,0x9a,0x38,0x9b,0x01,0x9c,0x80,0x9d,0x02,0x9e,0x06, + 0x9f,0x01,0xa0,0x01,0xa1,0x00,0xa2,0x00,0xa4,0x80,0xa5,0x36,0xa6,0x36,0xa8,0x67, + 0xa9,0x04,0xaa,0x00,0xac,0x33,0xad,0x02,0xae,0x00,0xb0,0xcd,0xb1,0x04,0xb2,0xcd, + 0xb3,0x04,0xb4,0x01,0xb8,0x00,0xb9,0x00,0xba,0x00,0xbb,0x00,0xbc,0x00,0xbd,0x00, + 0xbe,0x00,0xbf,0x00 +}; + +#define TVNORMS ARRAY_SIZE(tvnorms) + +/* supported controls */ +static struct v4l2_queryctrl em28xx_qctrl[] = { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = -128, + .maximum = 127, + .step = 1, + .default_value = 0, + .flags = 0, + },{ + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0x0, + .maximum = 0x1f, + .step = 0x1, + .default_value = 0x10, + .flags = 0, + },{ + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Saturation", + .minimum = 0x0, + .maximum = 0x1f, + .step = 0x1, + .default_value = 0x10, + .flags = 0, + },{ + .id = V4L2_CID_AUDIO_VOLUME, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Volume", + .minimum = 0x0, + .maximum = 0x1f, + .step = 0x1, + .default_value = 0x1f, + .flags = 0, + },{ + .id = V4L2_CID_AUDIO_MUTE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Mute", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + .flags = 0, + },{ + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Red chroma balance", + .minimum = -128, + .maximum = 127, + .step = 1, + .default_value = 0, + .flags = 0, + },{ + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Blue chroma balance", + .minimum = -128, + .maximum = 127, + .step = 1, + .default_value = 0, + .flags = 0, + },{ + .id = V4L2_CID_GAMMA, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gamma", + .minimum = 0x0, + .maximum = 0x3f, + .step = 0x1, + .default_value = 0x20, + .flags = 0, + } +}; + +static struct usb_driver em28xx_usb_driver; + +static DECLARE_MUTEX(em28xx_sysfs_lock); +static DECLARE_RWSEM(em28xx_disconnect); + +/********************* v4l2 interface ******************************************/ + +static inline unsigned long kvirt_to_pa(unsigned long adr) +{ + unsigned long kva, ret; + + kva = (unsigned long)page_address(vmalloc_to_page((void *)adr)); + kva |= adr & (PAGE_SIZE - 1); + ret = __pa(kva); + return ret; +} + +/* + * em28xx_config() + * inits registers with sane defaults + */ +static int em28xx_config(struct em28xx *dev) +{ + + /* Sets I2C speed to 100 KHz */ + em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1); + + /* enable vbi capturing */ + em28xx_audio_usb_mute(dev, 1); + dev->mute = 1; /* maybe not the right place... */ + dev->volume = 0x1f; + em28xx_audio_analog_set(dev); + em28xx_audio_analog_setup(dev); + em28xx_outfmt_set_yuv422(dev); + em28xx_colorlevels_set_default(dev); + em28xx_compression_disable(dev); + + return 0; +} + +/* + * em28xx_config_i2c() + * configure i2c attached devices + */ +void em28xx_config_i2c(struct em28xx *dev) +{ + struct v4l2_frequency f; + struct video_decoder_init em28xx_vdi = {.data = NULL }; + + + /* configure decoder */ + if(dev->model == EM2820_BOARD_MSI_VOX_USB_2){ + em28xx_vdi.data=saa7114_i2c_init; + em28xx_vdi.len=sizeof(saa7114_i2c_init); + } + + + em28xx_i2c_call_clients(dev, DECODER_INIT, &em28xx_vdi); + em28xx_i2c_call_clients(dev, DECODER_SET_INPUT, &dev->ctl_input); +/* em28xx_i2c_call_clients(dev,DECODER_SET_PICTURE, &dev->vpic); */ +/* em28xx_i2c_call_clients(dev,DECODER_SET_NORM,&dev->tvnorm->id); */ +/* em28xx_i2c_call_clients(dev,DECODER_ENABLE_OUTPUT,&output); */ +/* em28xx_i2c_call_clients(dev,DECODER_DUMP, NULL); */ + + /* configure tuner */ + f.tuner = 0; + f.type = V4L2_TUNER_ANALOG_TV; + f.frequency = 9076; /* FIXME:remove magic number */ + dev->ctl_freq = f.frequency; + em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f); + + /* configure tda9887 */ + + +/* em28xx_i2c_call_clients(dev,VIDIOC_S_STD,&dev->tvnorm->id); */ +} + +/* + * em28xx_empty_framequeues() + * prepare queues for incoming and outgoing frames + */ +static void em28xx_empty_framequeues(struct em28xx *dev) +{ + u32 i; + + INIT_LIST_HEAD(&dev->inqueue); + INIT_LIST_HEAD(&dev->outqueue); + + for (i = 0; i < EM28XX_NUM_FRAMES; i++) { + dev->frame[i].state = F_UNUSED; + dev->frame[i].buf.bytesused = 0; + } +} + +static void video_mux(struct em28xx *dev, int index) +{ + int input, ainput; + + input = INPUT(index)->vmux; + dev->ctl_input = index; + dev->ctl_ainput = INPUT(index)->amux; + + em28xx_i2c_call_clients(dev, DECODER_SET_INPUT, &input); + + + em28xx_videodbg("Setting input index=%d, vmux=%d, amux=%d\n",index,input,dev->ctl_ainput); + + if (dev->has_msp34xx) { + em28xx_i2c_call_clients(dev, VIDIOC_S_AUDIO, &dev->ctl_ainput); + ainput = EM28XX_AUDIO_SRC_TUNER; + em28xx_audio_source(dev, ainput); + } else { + switch (dev->ctl_ainput) { + case 0: + ainput = EM28XX_AUDIO_SRC_TUNER; + break; + default: + ainput = EM28XX_AUDIO_SRC_LINE; + } + em28xx_audio_source(dev, ainput); + } +} + +/* + * em28xx_v4l2_open() + * inits the device and starts isoc transfer + */ +static int em28xx_v4l2_open(struct inode *inode, struct file *filp) +{ + int minor = iminor(inode); + int errCode = 0; + struct em28xx *h,*dev = NULL; + struct list_head *list; + + list_for_each(list,&em28xx_devlist) { + h = list_entry(list, struct em28xx, devlist); + if (h->vdev->minor == minor) { + dev = h; + } + } + + filp->private_data=dev; + + + em28xx_videodbg("users=%d\n", dev->users); + + if (!down_read_trylock(&em28xx_disconnect)) + return -ERESTARTSYS; + + if (dev->users) { + em28xx_warn("this driver can be opened only once\n"); + up_read(&em28xx_disconnect); + return -EBUSY; + } + +/* if(dev->vbi_dev->minor == minor){ + dev->type=V4L2_BUF_TYPE_VBI_CAPTURE; + }*/ + if (dev->vdev->minor == minor) { + dev->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + } + + init_MUTEX(&dev->fileop_lock); /* to 1 == available */ + spin_lock_init(&dev->queue_lock); + init_waitqueue_head(&dev->wait_frame); + init_waitqueue_head(&dev->wait_stream); + + down(&dev->lock); + + em28xx_set_alternate(dev); + + dev->width = norm_maxw(dev); + dev->height = norm_maxh(dev); + dev->frame_size = dev->width * dev->height * 2; + dev->field_size = dev->frame_size >> 1; /*both_fileds ? dev->frame_size>>1 : dev->frame_size; */ + dev->bytesperline = dev->width * 2; + dev->hscale = 0; + dev->vscale = 0; + + em28xx_capture_start(dev, 1); + em28xx_resolution_set(dev); + + /* start the transfer */ + errCode = em28xx_init_isoc(dev); + if (errCode) + goto err; + + dev->users++; + filp->private_data = dev; + dev->io = IO_NONE; + dev->stream = STREAM_OFF; + dev->num_frames = 0; + + /* prepare queues */ + em28xx_empty_framequeues(dev); + + dev->state |= DEV_INITIALIZED; + + video_mux(dev, 0); + + err: + up(&dev->lock); + up_read(&em28xx_disconnect); + return errCode; +} + +/* + * em28xx_realease_resources() + * unregisters the v4l2,i2c and usb devices + * called when the device gets disconected or at module unload +*/ +static void em28xx_release_resources(struct em28xx *dev) +{ + down(&em28xx_sysfs_lock); + + em28xx_info("V4L2 device /dev/video%d deregistered\n", + dev->vdev->minor); + list_del(&dev->devlist); + video_unregister_device(dev->vdev); +/* video_unregister_device(dev->vbi_dev); */ + em28xx_i2c_unregister(dev); + usb_put_dev(dev->udev); + up(&em28xx_sysfs_lock); +} + +/* + * em28xx_v4l2_close() + * stops streaming and deallocates all resources allocated by the v4l2 calls and ioctls + */ +static int em28xx_v4l2_close(struct inode *inode, struct file *filp) +{ + int errCode; + struct em28xx *dev=filp->private_data; + + em28xx_videodbg("users=%d\n", dev->users); + + down(&dev->lock); + + em28xx_uninit_isoc(dev); + + em28xx_release_buffers(dev); + + /* the device is already disconnect, free the remaining resources */ + if (dev->state & DEV_DISCONNECTED) { + em28xx_release_resources(dev); + up(&dev->lock); + kfree(dev); + return 0; + } + + /* set alternate 0 */ + dev->alt = 0; + em28xx_videodbg("setting alternate 0\n"); + errCode = usb_set_interface(dev->udev, 0, 0); + if (errCode < 0) { + em28xx_errdev ("cannot change alternate number to 0 (error=%i)\n", + errCode); + } + + dev->users--; + wake_up_interruptible_nr(&dev->open, 1); + up(&dev->lock); + return 0; +} + +/* + * em28xx_v4l2_read() + * will allocate buffers when called for the first time + */ +static ssize_t +em28xx_v4l2_read(struct file *filp, char __user * buf, size_t count, + loff_t * f_pos) +{ + struct em28xx_frame_t *f, *i; + unsigned long lock_flags; + int ret = 0; + struct em28xx *dev = filp->private_data; + + if (down_interruptible(&dev->fileop_lock)) + return -ERESTARTSYS; + + if (dev->state & DEV_DISCONNECTED) { + em28xx_videodbg("device not present\n"); + up(&dev->fileop_lock); + return -ENODEV; + } + + if (dev->state & DEV_MISCONFIGURED) { + em28xx_videodbg("device misconfigured; close and open it again\n"); + up(&dev->fileop_lock); + return -EIO; + } + + if (dev->io == IO_MMAP) { + em28xx_videodbg ("IO method is set to mmap; close and open" + " the device again to choose the read method\n"); + up(&dev->fileop_lock); + return -EINVAL; + } + + if (dev->io == IO_NONE) { + if (!em28xx_request_buffers(dev, EM28XX_NUM_READ_FRAMES)) { + em28xx_errdev("read failed, not enough memory\n"); + up(&dev->fileop_lock); + return -ENOMEM; + } + dev->io = IO_READ; + dev->stream = STREAM_ON; + em28xx_queue_unusedframes(dev); + } + + if (!count) { + up(&dev->fileop_lock); + return 0; + } + + if (list_empty(&dev->outqueue)) { + if (filp->f_flags & O_NONBLOCK) { + up(&dev->fileop_lock); + return -EAGAIN; + } + ret = wait_event_interruptible + (dev->wait_frame, + (!list_empty(&dev->outqueue)) || + (dev->state & DEV_DISCONNECTED)); + if (ret) { + up(&dev->fileop_lock); + return ret; + } + if (dev->state & DEV_DISCONNECTED) { + up(&dev->fileop_lock); + return -ENODEV; + } + } + + f = list_entry(dev->outqueue.prev, struct em28xx_frame_t, frame); + + spin_lock_irqsave(&dev->queue_lock, lock_flags); + list_for_each_entry(i, &dev->outqueue, frame) + i->state = F_UNUSED; + INIT_LIST_HEAD(&dev->outqueue); + spin_unlock_irqrestore(&dev->queue_lock, lock_flags); + + em28xx_queue_unusedframes(dev); + + if (count > f->buf.length) + count = f->buf.length; + + if (copy_to_user(buf, f->bufmem, count)) { + up(&dev->fileop_lock); + return -EFAULT; + } + *f_pos += count; + + up(&dev->fileop_lock); + + return count; +} + +/* + * em28xx_v4l2_poll() + * will allocate buffers when called for the first time + */ +static unsigned int em28xx_v4l2_poll(struct file *filp, poll_table * wait) +{ + unsigned int mask = 0; + struct em28xx *dev = filp->private_data; + + if (down_interruptible(&dev->fileop_lock)) + return POLLERR; + + if (dev->state & DEV_DISCONNECTED) { + em28xx_videodbg("device not present\n"); + } else if (dev->state & DEV_MISCONFIGURED) { + em28xx_videodbg("device is misconfigured; close and open it again\n"); + } else { + if (dev->io == IO_NONE) { + if (!em28xx_request_buffers + (dev, EM28XX_NUM_READ_FRAMES)) { + em28xx_warn + ("poll() failed, not enough memory\n"); + } else { + dev->io = IO_READ; + dev->stream = STREAM_ON; + } + } + + if (dev->io == IO_READ) { + em28xx_queue_unusedframes(dev); + poll_wait(filp, &dev->wait_frame, wait); + + if (!list_empty(&dev->outqueue)) + mask |= POLLIN | POLLRDNORM; + + up(&dev->fileop_lock); + + return mask; + } + } + + up(&dev->fileop_lock); + return POLLERR; +} + +/* + * em28xx_vm_open() + */ +static void em28xx_vm_open(struct vm_area_struct *vma) +{ + struct em28xx_frame_t *f = vma->vm_private_data; + f->vma_use_count++; +} + +/* + * em28xx_vm_close() + */ +static void em28xx_vm_close(struct vm_area_struct *vma) +{ + /* NOTE: buffers are not freed here */ + struct em28xx_frame_t *f = vma->vm_private_data; + f->vma_use_count--; +} + +static struct vm_operations_struct em28xx_vm_ops = { + .open = em28xx_vm_open, + .close = em28xx_vm_close, +}; + +/* + * em28xx_v4l2_mmap() + */ +static int em28xx_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) +{ + unsigned long size = vma->vm_end - vma->vm_start, + start = vma->vm_start, pos, page; + u32 i; + + struct em28xx *dev = filp->private_data; + + if (down_interruptible(&dev->fileop_lock)) + return -ERESTARTSYS; + + if (dev->state & DEV_DISCONNECTED) { + em28xx_videodbg("mmap: device not present\n"); + up(&dev->fileop_lock); + return -ENODEV; + } + + if (dev->state & DEV_MISCONFIGURED) { + em28xx_videodbg ("mmap: Device is misconfigured; close and " + "open it again\n"); + up(&dev->fileop_lock); + return -EIO; + } + + if (dev->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) || + size != PAGE_ALIGN(dev->frame[0].buf.length)) { + up(&dev->fileop_lock); + return -EINVAL; + } + + for (i = 0; i < dev->num_frames; i++) { + if ((dev->frame[i].buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff) + break; + } + if (i == dev->num_frames) { + em28xx_videodbg("mmap: user supplied mapping address is out of range\n"); + up(&dev->fileop_lock); + return -EINVAL; + } + + /* VM_IO is eventually going to replace PageReserved altogether */ + vma->vm_flags |= VM_IO; + vma->vm_flags |= VM_RESERVED; /* avoid to swap out this VMA */ + + pos = (unsigned long)dev->frame[i].bufmem; + while (size > 0) { /* size is page-aligned */ + page = vmalloc_to_pfn((void *)pos); + if (remap_pfn_range(vma, start, page, PAGE_SIZE, + vma->vm_page_prot)) { + em28xx_videodbg("mmap: rename page map failed\n"); + up(&dev->fileop_lock); + return -EAGAIN; + } + start += PAGE_SIZE; + pos += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vma->vm_ops = &em28xx_vm_ops; + vma->vm_private_data = &dev->frame[i]; + + em28xx_vm_open(vma); + up(&dev->fileop_lock); + return 0; +} + +/* + * em28xx_get_ctrl() + * return the current saturation, brightness or contrast, mute state + */ +static int em28xx_get_ctrl(struct em28xx *dev, struct v4l2_control *ctrl) +{ + s32 tmp; + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + ctrl->value = dev->mute; + return 0; + case V4L2_CID_AUDIO_VOLUME: + ctrl->value = dev->volume; + return 0; + case V4L2_CID_BRIGHTNESS: + if ((tmp = em28xx_brightness_get(dev)) < 0) + return -EIO; + ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */ + return 0; + case V4L2_CID_CONTRAST: + if ((ctrl->value = em28xx_contrast_get(dev)) < 0) + return -EIO; + return 0; + case V4L2_CID_SATURATION: + if ((ctrl->value = em28xx_saturation_get(dev)) < 0) + return -EIO; + return 0; + case V4L2_CID_RED_BALANCE: + if ((tmp = em28xx_v_balance_get(dev)) < 0) + return -EIO; + ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */ + return 0; + case V4L2_CID_BLUE_BALANCE: + if ((tmp = em28xx_u_balance_get(dev)) < 0) + return -EIO; + ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */ + return 0; + case V4L2_CID_GAMMA: + if ((ctrl->value = em28xx_gamma_get(dev)) < 0) + return -EIO; + return 0; + default: + return -EINVAL; + } +} + +/* + * em28xx_set_ctrl() + * mute or set new saturation, brightness or contrast + */ +static int em28xx_set_ctrl(struct em28xx *dev, const struct v4l2_control *ctrl) +{ + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + if (ctrl->value != dev->mute) { + dev->mute = ctrl->value; + em28xx_audio_usb_mute(dev, ctrl->value); + return em28xx_audio_analog_set(dev); + } + return 0; + case V4L2_CID_AUDIO_VOLUME: + dev->volume = ctrl->value; + return em28xx_audio_analog_set(dev); + case V4L2_CID_BRIGHTNESS: + return em28xx_brightness_set(dev, ctrl->value); + case V4L2_CID_CONTRAST: + return em28xx_contrast_set(dev, ctrl->value); + case V4L2_CID_SATURATION: + return em28xx_saturation_set(dev, ctrl->value); + case V4L2_CID_RED_BALANCE: + return em28xx_v_balance_set(dev, ctrl->value); + case V4L2_CID_BLUE_BALANCE: + return em28xx_u_balance_set(dev, ctrl->value); + case V4L2_CID_GAMMA: + return em28xx_gamma_set(dev, ctrl->value); + default: + return -EINVAL; + } +} + +/* + * em28xx_stream_interrupt() + * stops streaming + */ +static int em28xx_stream_interrupt(struct em28xx *dev) +{ + int ret = 0; + + /* stop reading from the device */ + + dev->stream = STREAM_INTERRUPT; + ret = wait_event_timeout(dev->wait_stream, + (dev->stream == STREAM_OFF) || + (dev->state & DEV_DISCONNECTED), + EM28XX_URB_TIMEOUT); + if (dev->state & DEV_DISCONNECTED) + return -ENODEV; + else if (ret) { + dev->state |= DEV_MISCONFIGURED; + em28xx_videodbg("device is misconfigured; close and " + "open /dev/video%d again\n", dev->vdev->minor); + return ret; + } + + return 0; +} + +static int em28xx_set_norm(struct em28xx *dev, int width, int height) +{ + unsigned int hscale, vscale; + unsigned int maxh, maxw; + + maxw = norm_maxw(dev); + maxh = norm_maxh(dev); + + /* width must even because of the YUYV format */ + /* height must be even because of interlacing */ + height &= 0xfffe; + width &= 0xfffe; + + if (height < 32) + height = 32; + if (height > maxh) + height = maxh; + if (width < 48) + width = 48; + if (width > maxw) + width = maxw; + + if ((hscale = (((unsigned long)maxw) << 12) / width - 4096L) >= 0x4000) + hscale = 0x3fff; + width = (((unsigned long)maxw) << 12) / (hscale + 4096L); + + if ((vscale = (((unsigned long)maxh) << 12) / height - 4096L) >= 0x4000) + vscale = 0x3fff; + height = (((unsigned long)maxh) << 12) / (vscale + 4096L); + + /* set new image size */ + dev->width = width; + dev->height = height; + dev->frame_size = dev->width * dev->height * 2; + dev->field_size = dev->frame_size >> 1; /*both_fileds ? dev->frame_size>>1 : dev->frame_size; */ + dev->bytesperline = dev->width * 2; + dev->hscale = hscale; + dev->vscale = vscale; + + em28xx_resolution_set(dev); + + return 0; +} + +/* + * em28xx_v4l2_do_ioctl() + * This function is _not_ called directly, but from + * em28xx_v4l2_ioctl. Userspace + * copying is done already, arg is a kernel pointer. + */ +static int em28xx_do_ioctl(struct inode *inode, struct file *filp, + struct em28xx *dev, unsigned int cmd, void *arg, + v4l2_kioctl driver_ioctl) +{ + int ret; + + switch (cmd) { + /* ---------- tv norms ---------- */ + case VIDIOC_ENUMSTD: + { + struct v4l2_standard *e = arg; + unsigned int i; + + i = e->index; + if (i >= TVNORMS) + return -EINVAL; + ret = v4l2_video_std_construct(e, tvnorms[e->index].id, + tvnorms[e->index].name); + e->index = i; + if (ret < 0) + return ret; + return 0; + } + case VIDIOC_G_STD: + { + v4l2_std_id *id = arg; + + *id = dev->tvnorm->id; + return 0; + } + case VIDIOC_S_STD: + { + v4l2_std_id *id = arg; + unsigned int i; + + for (i = 0; i < TVNORMS; i++) + if (*id == tvnorms[i].id) + break; + if (i == TVNORMS) + for (i = 0; i < TVNORMS; i++) + if (*id & tvnorms[i].id) + break; + if (i == TVNORMS) + return -EINVAL; + + down(&dev->lock); + dev->tvnorm = &tvnorms[i]; + + em28xx_set_norm(dev, dev->width, dev->height); + +/* + dev->width=norm_maxw(dev); + dev->height=norm_maxh(dev); + dev->frame_size=dev->width*dev->height*2; + dev->field_size=dev->frame_size>>1; + dev->bytesperline=dev->width*2; + dev->hscale=0; + dev->vscale=0; + + em28xx_resolution_set(dev); +*/ +/* + em28xx_uninit_isoc(dev); + em28xx_set_alternate(dev); + em28xx_capture_start(dev, 1); + em28xx_resolution_set(dev); + em28xx_init_isoc(dev); +*/ + em28xx_i2c_call_clients(dev, DECODER_SET_NORM, + &tvnorms[i].mode); + em28xx_i2c_call_clients(dev, VIDIOC_S_STD, + &dev->tvnorm->id); + + up(&dev->lock); + + return 0; + } + + /* ------ input switching ---------- */ + case VIDIOC_ENUMINPUT: + { + struct v4l2_input *i = arg; + unsigned int n; + static const char *iname[] = { + [EM28XX_VMUX_COMPOSITE1] = "Composite1", + [EM28XX_VMUX_COMPOSITE2] = "Composite2", + [EM28XX_VMUX_COMPOSITE3] = "Composite3", + [EM28XX_VMUX_COMPOSITE4] = "Composite4", + [EM28XX_VMUX_SVIDEO] = "S-Video", + [EM28XX_VMUX_TELEVISION] = "Television", + [EM28XX_VMUX_CABLE] = "Cable TV", + [EM28XX_VMUX_DVB] = "DVB", + [EM28XX_VMUX_DEBUG] = "for debug only", + }; + + n = i->index; + if (n >= MAX_EM28XX_INPUT) + return -EINVAL; + if (0 == INPUT(n)->type) + return -EINVAL; + memset(i, 0, sizeof(*i)); + i->index = n; + i->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(i->name, iname[INPUT(n)->type]); + if ((EM28XX_VMUX_TELEVISION == INPUT(n)->type) || + (EM28XX_VMUX_CABLE == INPUT(n)->type)) + i->type = V4L2_INPUT_TYPE_TUNER; + for (n = 0; n < ARRAY_SIZE(tvnorms); n++) + i->std |= tvnorms[n].id; + return 0; + } + + case VIDIOC_G_INPUT: + { + int *i = arg; + *i = dev->ctl_input; + + return 0; + } + + case VIDIOC_S_INPUT: + { + int *index = arg; + + if (*index >= MAX_EM28XX_INPUT) + return -EINVAL; + if (0 == INPUT(*index)->type) + return -EINVAL; + + down(&dev->lock); + video_mux(dev, *index); + up(&dev->lock); + + return 0; + } + + case VIDIOC_G_AUDIO: + { + struct v4l2_audio *a = arg; + unsigned int index = a->index; + + if (a->index > 1) + return -EINVAL; + memset(a, 0, sizeof(*a)); + index = dev->ctl_ainput; + + if (index == 0) { + strcpy(a->name, "Television"); + } else { + strcpy(a->name, "Line In"); + } + a->capability = V4L2_AUDCAP_STEREO; + a->index = index; + return 0; + } + + case VIDIOC_S_AUDIO: + { + struct v4l2_audio *a = arg; + if (a->index != dev->ctl_ainput) + return -EINVAL; + + return 0; + } + + /* --- controls ---------------------------------------------- */ + case VIDIOC_QUERYCTRL: + { + struct v4l2_queryctrl *qc = arg; + u8 i, n; + n = sizeof(em28xx_qctrl) / sizeof(em28xx_qctrl[0]); + for (i = 0; i < n; i++) + if (qc->id && qc->id == em28xx_qctrl[i].id) { + memcpy(qc, &(em28xx_qctrl[i]), + sizeof(*qc)); + return 0; + } + + return -EINVAL; + } + + case VIDIOC_G_CTRL: + { + struct v4l2_control *ctrl = arg; + + + return em28xx_get_ctrl(dev, ctrl); + } + + case VIDIOC_S_CTRL_OLD: /* ??? */ + case VIDIOC_S_CTRL: + { + struct v4l2_control *ctrl = arg; + u8 i, n; + + + n = sizeof(em28xx_qctrl) / sizeof(em28xx_qctrl[0]); + for (i = 0; i < n; i++) + if (ctrl->id == em28xx_qctrl[i].id) { + if (ctrl->value < + em28xx_qctrl[i].minimum + || ctrl->value > + em28xx_qctrl[i].maximum) + return -ERANGE; + + return em28xx_set_ctrl(dev, ctrl); + } + return -EINVAL; + } + + /* --- tuner ioctls ------------------------------------------ */ + case VIDIOC_G_TUNER: + { + struct v4l2_tuner *t = arg; + int status = 0; + + if (0 != t->index) + return -EINVAL; + + memset(t, 0, sizeof(*t)); + strcpy(t->name, "Tuner"); + t->type = V4L2_TUNER_ANALOG_TV; + t->capability = V4L2_TUNER_CAP_NORM; + t->rangehigh = 0xffffffffUL; /* FIXME: set correct range */ +/* t->signal = 0xffff;*/ +/* em28xx_i2c_call_clients(dev,VIDIOC_G_TUNER,t);*/ + /* No way to get signal strength? */ + down(&dev->lock); + em28xx_i2c_call_clients(dev, DECODER_GET_STATUS, + &status); + up(&dev->lock); + t->signal = + (status & DECODER_STATUS_GOOD) != 0 ? 0xffff : 0; + + em28xx_videodbg("VIDIO_G_TUNER: signal=%x, afc=%x\n", t->signal, + t->afc); + return 0; + } + case VIDIOC_S_TUNER: + { + struct v4l2_tuner *t = arg; + int status = 0; + + if (0 != t->index) + return -EINVAL; + memset(t, 0, sizeof(*t)); + strcpy(t->name, "Tuner"); + t->type = V4L2_TUNER_ANALOG_TV; + t->capability = V4L2_TUNER_CAP_NORM; + t->rangehigh = 0xffffffffUL; /* FIXME: set correct range */ +/* t->signal = 0xffff; */ + /* No way to get signal strength? */ + down(&dev->lock); + em28xx_i2c_call_clients(dev, DECODER_GET_STATUS, + &status); + up(&dev->lock); + t->signal = + (status & DECODER_STATUS_GOOD) != 0 ? 0xffff : 0; + + em28xx_videodbg("VIDIO_S_TUNER: signal=%x, afc=%x\n", + t->signal, t->afc); + return 0; + } + case VIDIOC_G_FREQUENCY: + { + struct v4l2_frequency *f = arg; + + memset(f, 0, sizeof(*f)); + f->type = V4L2_TUNER_ANALOG_TV; + f->frequency = dev->ctl_freq; + + return 0; + } + case VIDIOC_S_FREQUENCY: + { + struct v4l2_frequency *f = arg; + + if (0 != f->tuner) + return -EINVAL; + + if (V4L2_TUNER_ANALOG_TV != f->type) + return -EINVAL; + + down(&dev->lock); + dev->ctl_freq = f->frequency; + em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, f); + up(&dev->lock); + return 0; + } + + case VIDIOC_CROPCAP: + { + struct v4l2_cropcap *cc = arg; + + if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + cc->bounds.left = 0; + cc->bounds.top = 0; + cc->bounds.width = dev->width; + cc->bounds.height = dev->height; + cc->defrect = cc->bounds; + cc->pixelaspect.numerator = 54; /* 4:3 FIXME: remove magic numbers */ + cc->pixelaspect.denominator = 59; + return 0; + } + case VIDIOC_STREAMON: + { + int *type = arg; + + if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE + || dev->io != IO_MMAP) + return -EINVAL; + + if (list_empty(&dev->inqueue)) + return -EINVAL; + + dev->stream = STREAM_ON; /* FIXME: Start video capture here? */ + + em28xx_videodbg("VIDIOC_STREAMON: starting stream\n"); + + return 0; + } + case VIDIOC_STREAMOFF: + { + int *type = arg; + int ret; + + if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE + || dev->io != IO_MMAP) + return -EINVAL; + + if (dev->stream == STREAM_ON) { + em28xx_videodbg ("VIDIOC_STREAMOFF: interrupting stream\n"); + if ((ret = em28xx_stream_interrupt(dev))) + return ret; + } + em28xx_empty_framequeues(dev); + + return 0; + } + default: + return v4l_compat_translate_ioctl(inode, filp, cmd, arg, + driver_ioctl); + } + return 0; +} + +/* + * em28xx_v4l2_do_ioctl() + * This function is _not_ called directly, but from + * em28xx_v4l2_ioctl. Userspace + * copying is done already, arg is a kernel pointer. + */ +static int em28xx_video_do_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, void *arg) +{ + struct em28xx *dev = filp->private_data; + + if (!dev) + return -ENODEV; + + if (video_debug > 1) + em28xx_print_ioctl(dev->name,cmd); + + switch (cmd) { + + /* --- capabilities ------------------------------------------ */ + case VIDIOC_QUERYCAP: + { + struct v4l2_capability *cap = arg; + + memset(cap, 0, sizeof(*cap)); + strlcpy(cap->driver, "em28xx", sizeof(cap->driver)); + strlcpy(cap->card, em28xx_boards[dev->model].name, + sizeof(cap->card)); + strlcpy(cap->bus_info, dev->udev->dev.bus_id, + sizeof(cap->bus_info)); + cap->version = EM28XX_VERSION_CODE; + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_AUDIO | + V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; + if (dev->has_tuner) + cap->capabilities |= V4L2_CAP_TUNER; + return 0; + } + + /* --- capture ioctls ---------------------------------------- */ + case VIDIOC_ENUM_FMT: + { + struct v4l2_fmtdesc *fmtd = arg; + + if (fmtd->index != 0) + return -EINVAL; + memset(fmtd, 0, sizeof(*fmtd)); + fmtd->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + strcpy(fmtd->description, "Packed YUY2"); + fmtd->pixelformat = V4L2_PIX_FMT_YUYV; + memset(fmtd->reserved, 0, sizeof(fmtd->reserved)); + return 0; + } + + case VIDIOC_G_FMT: + { + struct v4l2_format *format = arg; + + em28xx_videodbg("VIDIOC_G_FMT: type=%s\n", + format->type == + V4L2_BUF_TYPE_VIDEO_CAPTURE ? + "V4L2_BUF_TYPE_VIDEO_CAPTURE" : format->type == + V4L2_BUF_TYPE_VBI_CAPTURE ? + "V4L2_BUF_TYPE_VBI_CAPTURE " : + "not supported"); + + if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + format->fmt.pix.width = dev->width; + format->fmt.pix.height = dev->height; + format->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; + format->fmt.pix.bytesperline = dev->bytesperline; + format->fmt.pix.sizeimage = dev->frame_size; + format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + format->fmt.pix.field = dev->interlaced ? V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP; /* FIXME: TOP? NONE? BOTTOM? ALTENATE? */ + + em28xx_videodbg("VIDIOC_G_FMT: %dx%d\n", dev->width, + dev->height); + return 0; + } + + case VIDIOC_TRY_FMT: + case VIDIOC_S_FMT: + { + struct v4l2_format *format = arg; + u32 i; + int ret = 0; + int width = format->fmt.pix.width; + int height = format->fmt.pix.height; + unsigned int hscale, vscale; + unsigned int maxh, maxw; + + maxw = norm_maxw(dev); + maxh = norm_maxh(dev); + +/* int both_fields; */ + + em28xx_videodbg("%s: type=%s\n", + cmd == + VIDIOC_TRY_FMT ? "VIDIOC_TRY_FMT" : + "VIDIOC_S_FMT", + format->type == + V4L2_BUF_TYPE_VIDEO_CAPTURE ? + "V4L2_BUF_TYPE_VIDEO_CAPTURE" : format->type == + V4L2_BUF_TYPE_VBI_CAPTURE ? + "V4L2_BUF_TYPE_VBI_CAPTURE " : + "not supported"); + + if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + em28xx_videodbg("%s: requested %dx%d\n", + cmd == + VIDIOC_TRY_FMT ? "VIDIOC_TRY_FMT" : + "VIDIOC_S_FMT", format->fmt.pix.width, + format->fmt.pix.height); + + /* FIXME: Move some code away from here */ + /* width must even because of the YUYV format */ + /* height must be even because of interlacing */ + height &= 0xfffe; + width &= 0xfffe; + + if (height < 32) + height = 32; + if (height > maxh) + height = maxh; + if (width < 48) + width = 48; + if (width > maxw) + width = maxw; + + if(dev->is_em2800){ + /* the em2800 can only scale down to 50% */ + if(height % (maxh / 2)) + height=maxh; + if(width % (maxw / 2)) + width=maxw; + /* according to empiatech support */ + /* the MaxPacketSize is to small to support */ + /* framesizes larger than 640x480 @ 30 fps */ + /* or 640x576 @ 25 fps. As this would cut */ + /* of a part of the image we prefer */ + /* 360x576 or 360x480 for now */ + if(width == maxw && height == maxh) + width /= 2; + } + + if ((hscale = + (((unsigned long)maxw) << 12) / width - 4096L) >= + 0x4000) + hscale = 0x3fff; + width = + (((unsigned long)maxw) << 12) / (hscale + 4096L); + + if ((vscale = + (((unsigned long)maxh) << 12) / height - 4096L) >= + 0x4000) + vscale = 0x3fff; + height = + (((unsigned long)maxh) << 12) / (vscale + 4096L); + + format->fmt.pix.width = width; + format->fmt.pix.height = height; + format->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV; + format->fmt.pix.bytesperline = width * 2; + format->fmt.pix.sizeimage = width * 2 * height; + format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + format->fmt.pix.field = V4L2_FIELD_INTERLACED; + + em28xx_videodbg("%s: returned %dx%d (%d, %d)\n", + cmd == + VIDIOC_TRY_FMT ? "VIDIOC_TRY_FMT" : + "VIDIOC_S_FMT", format->fmt.pix.width, + format->fmt.pix.height, hscale, vscale); + + if (cmd == VIDIOC_TRY_FMT) + return 0; + + for (i = 0; i < dev->num_frames; i++) + if (dev->frame[i].vma_use_count) { + em28xx_videodbg("VIDIOC_S_FMT failed. " + "Unmap the buffers first.\n"); + return -EINVAL; + } + + /* stop io in case it is already in progress */ + if (dev->stream == STREAM_ON) { + em28xx_videodbg("VIDIOC_SET_FMT: interupting stream\n"); + if ((ret = em28xx_stream_interrupt(dev))) + return ret; + } + + em28xx_release_buffers(dev); + dev->io = IO_NONE; + + /* set new image size */ + dev->width = width; + dev->height = height; + dev->frame_size = dev->width * dev->height * 2; + dev->field_size = dev->frame_size >> 1; /*both_fileds ? dev->frame_size>>1 : dev->frame_size; */ + dev->bytesperline = dev->width * 2; + dev->hscale = hscale; + dev->vscale = vscale; +/* dev->both_fileds = both_fileds; */ + em28xx_uninit_isoc(dev); + em28xx_set_alternate(dev); + em28xx_capture_start(dev, 1); + em28xx_resolution_set(dev); + em28xx_init_isoc(dev); + + return 0; + } + + /* --- streaming capture ------------------------------------- */ + case VIDIOC_REQBUFS: + { + struct v4l2_requestbuffers *rb = arg; + u32 i; + int ret; + + if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + rb->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if (dev->io == IO_READ) { + em28xx_videodbg ("method is set to read;" + " close and open the device again to" + " choose the mmap I/O method\n"); + return -EINVAL; + } + + for (i = 0; i < dev->num_frames; i++) + if (dev->frame[i].vma_use_count) { + em28xx_videodbg ("VIDIOC_REQBUFS failed; previous buffers are still mapped\n"); + return -EINVAL; + } + + if (dev->stream == STREAM_ON) { + em28xx_videodbg("VIDIOC_REQBUFS: interrupting stream\n"); + if ((ret = em28xx_stream_interrupt(dev))) + return ret; + } + + em28xx_empty_framequeues(dev); + + em28xx_release_buffers(dev); + if (rb->count) + rb->count = + em28xx_request_buffers(dev, rb->count); + + dev->frame_current = NULL; + + em28xx_videodbg ("VIDIOC_REQBUFS: setting io method to mmap: num bufs %i\n", + rb->count); + dev->io = rb->count ? IO_MMAP : IO_NONE; + return 0; + } + + case VIDIOC_QUERYBUF: + { + struct v4l2_buffer *b = arg; + + if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b->index >= dev->num_frames || dev->io != IO_MMAP) + return -EINVAL; + + memcpy(b, &dev->frame[b->index].buf, sizeof(*b)); + + if (dev->frame[b->index].vma_use_count) { + b->flags |= V4L2_BUF_FLAG_MAPPED; + } + if (dev->frame[b->index].state == F_DONE) + b->flags |= V4L2_BUF_FLAG_DONE; + else if (dev->frame[b->index].state != F_UNUSED) + b->flags |= V4L2_BUF_FLAG_QUEUED; + return 0; + } + case VIDIOC_QBUF: + { + struct v4l2_buffer *b = arg; + unsigned long lock_flags; + + if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + b->index >= dev->num_frames || dev->io != IO_MMAP) { + return -EINVAL; + } + + if (dev->frame[b->index].state != F_UNUSED) { + return -EAGAIN; + } + dev->frame[b->index].state = F_QUEUED; + + /* add frame to fifo */ + spin_lock_irqsave(&dev->queue_lock, lock_flags); + list_add_tail(&dev->frame[b->index].frame, + &dev->inqueue); + spin_unlock_irqrestore(&dev->queue_lock, lock_flags); + + return 0; + } + case VIDIOC_DQBUF: + { + struct v4l2_buffer *b = arg; + struct em28xx_frame_t *f; + unsigned long lock_flags; + int ret = 0; + + if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE + || dev->io != IO_MMAP) + return -EINVAL; + + if (list_empty(&dev->outqueue)) { + if (dev->stream == STREAM_OFF) + return -EINVAL; + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + ret = wait_event_interruptible + (dev->wait_frame, + (!list_empty(&dev->outqueue)) || + (dev->state & DEV_DISCONNECTED)); + if (ret) + return ret; + if (dev->state & DEV_DISCONNECTED) + return -ENODEV; + } + + spin_lock_irqsave(&dev->queue_lock, lock_flags); + f = list_entry(dev->outqueue.next, + struct em28xx_frame_t, frame); + list_del(dev->outqueue.next); + spin_unlock_irqrestore(&dev->queue_lock, lock_flags); + + f->state = F_UNUSED; + memcpy(b, &f->buf, sizeof(*b)); + + if (f->vma_use_count) + b->flags |= V4L2_BUF_FLAG_MAPPED; + + return 0; + } + default: + return em28xx_do_ioctl(inode, filp, dev, cmd, arg, + em28xx_video_do_ioctl); + } + return 0; +} + +/* + * em28xx_v4l2_ioctl() + * handle v4l2 ioctl the main action happens in em28xx_v4l2_do_ioctl() + */ +static int em28xx_v4l2_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + int ret = 0; + struct em28xx *dev = filp->private_data; + + if (down_interruptible(&dev->fileop_lock)) + return -ERESTARTSYS; + + if (dev->state & DEV_DISCONNECTED) { + em28xx_errdev("v4l2 ioctl: device not present\n"); + up(&dev->fileop_lock); + return -ENODEV; + } + + if (dev->state & DEV_MISCONFIGURED) { + em28xx_errdev + ("v4l2 ioctl: device is misconfigured; close and open it again\n"); + up(&dev->fileop_lock); + return -EIO; + } + + ret = video_usercopy(inode, filp, cmd, arg, em28xx_video_do_ioctl); + + up(&dev->fileop_lock); + + return ret; +} + +static struct file_operations em28xx_v4l_fops = { + .owner = THIS_MODULE, + .open = em28xx_v4l2_open, + .release = em28xx_v4l2_close, + .ioctl = em28xx_v4l2_ioctl, + .read = em28xx_v4l2_read, + .poll = em28xx_v4l2_poll, + .mmap = em28xx_v4l2_mmap, + .llseek = no_llseek, +}; + +/******************************** usb interface *****************************************/ + +/* + * em28xx_init_dev() + * allocates and inits the device structs, registers i2c bus and v4l device + */ +static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, + int minor, int model) +{ + struct em28xx *dev = *devhandle; + int retval = -ENOMEM; + int errCode, i; + unsigned int maxh, maxw; + + dev->udev = udev; + dev->model = model; + init_MUTEX(&dev->lock); + init_waitqueue_head(&dev->open); + + dev->em28xx_write_regs = em28xx_write_regs; + dev->em28xx_read_reg = em28xx_read_reg; + dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; + dev->em28xx_write_regs_req = em28xx_write_regs_req; + dev->em28xx_read_reg_req = em28xx_read_reg_req; + dev->is_em2800 = em28xx_boards[model].is_em2800; + dev->has_tuner = em28xx_boards[model].has_tuner; + dev->has_msp34xx = em28xx_boards[model].has_msp34xx; + dev->tda9887_conf = em28xx_boards[model].tda9887_conf; + dev->decoder = em28xx_boards[model].decoder; + + if (tuner >= 0) + dev->tuner_type = tuner; + else + dev->tuner_type = em28xx_boards[model].tuner_type; + + dev->video_inputs = em28xx_boards[model].vchannels; + + for (i = 0; i < TVNORMS; i++) + if (em28xx_boards[model].norm == tvnorms[i].mode) + break; + if (i == TVNORMS) + i = 0; + + dev->tvnorm = &tvnorms[i]; /* set default norm */ + + em28xx_videodbg("tvnorm=%s\n", dev->tvnorm->name); + + maxw = norm_maxw(dev); + maxh = norm_maxh(dev); + + /* set default image size */ + dev->width = maxw; + dev->height = maxh; + dev->interlaced = EM28XX_INTERLACED_DEFAULT; + dev->field_size = dev->width * dev->height; + dev->frame_size = + dev->interlaced ? dev->field_size << 1 : dev->field_size; + dev->bytesperline = dev->width * 2; + dev->hscale = 0; + dev->vscale = 0; + dev->ctl_input = 2; + + /* setup video picture settings for saa7113h */ + memset(&dev->vpic, 0, sizeof(dev->vpic)); + dev->vpic.colour = 128 << 8; + dev->vpic.hue = 128 << 8; + dev->vpic.brightness = 128 << 8; + dev->vpic.contrast = 192 << 8; + dev->vpic.whiteness = 128 << 8; /* This one isn't used */ + dev->vpic.depth = 16; + dev->vpic.palette = VIDEO_PALETTE_YUV422; + +#ifdef CONFIG_MODULES + /* request some modules */ + if (dev->decoder == EM28XX_SAA7113 || dev->decoder == EM28XX_SAA7114) + request_module("saa711x"); + if (dev->decoder == EM28XX_TVP5150) + request_module("tvp5150"); + if (dev->has_tuner) + request_module("tuner"); + if (dev->tda9887_conf) + request_module("tda9887"); +#endif + errCode = em28xx_config(dev); + if (errCode) { + em28xx_errdev("error configuring device\n"); + kfree(dev); + return -ENOMEM; + } + + down(&dev->lock); + /* register i2c bus */ + em28xx_i2c_register(dev); + + /* Do board specific init and eeprom reading */ + em28xx_card_setup(dev); + + /* configure the device */ + em28xx_config_i2c(dev); + + up(&dev->lock); + + errCode = em28xx_config(dev); + +#ifdef CONFIG_MODULES + if (dev->has_msp34xx) + request_module("msp3400"); +#endif + /* allocate and fill v4l2 device struct */ + dev->vdev = video_device_alloc(); + if (NULL == dev->vdev) { + em28xx_errdev("cannot allocate video_device.\n"); + kfree(dev); + return -ENOMEM; + } + + dev->vdev->type = VID_TYPE_CAPTURE; + if (dev->has_tuner) + dev->vdev->type |= VID_TYPE_TUNER; + dev->vdev->hardware = 0; + dev->vdev->fops = &em28xx_v4l_fops; + dev->vdev->minor = -1; + dev->vdev->dev = &dev->udev->dev; + dev->vdev->release = video_device_release; + snprintf(dev->vdev->name, sizeof(dev->vdev->name), "%s", + "em28xx video"); + list_add_tail(&dev->devlist,&em28xx_devlist); + + /* register v4l2 device */ + down(&dev->lock); + if ((retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1))) { + em28xx_errdev("unable to register video device (error=%i).\n", + retval); + up(&dev->lock); + list_del(&dev->devlist); + video_device_release(dev->vdev); + kfree(dev); + return -ENODEV; + } + if (dev->has_msp34xx) { + /* Send a reset to other chips via gpio */ + em28xx_write_regs_req(dev, 0x00, 0x08, "\xf7", 1); + udelay(2500); + em28xx_write_regs_req(dev, 0x00, 0x08, "\xff", 1); + udelay(2500); + + } + video_mux(dev, 0); + + up(&dev->lock); + + em28xx_info("V4L2 device registered as /dev/video%d\n", + dev->vdev->minor); + + return 0; +} + +/* + * em28xx_usb_probe() + * checks for supported devices + */ +static int em28xx_usb_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + const struct usb_endpoint_descriptor *endpoint; + struct usb_device *udev; + struct usb_interface *uif; + struct em28xx *dev = NULL; + int retval = -ENODEV; + int model,i,nr,ifnum; + + udev = usb_get_dev(interface_to_usbdev(interface)); + ifnum = interface->altsetting[0].desc.bInterfaceNumber; + + + /* Don't register audio interfaces */ + if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { + em28xx_err(DRIVER_NAME " audio device (%04x:%04x): interface %i, class %i\n", + udev->descriptor.idVendor,udev->descriptor.idProduct, + ifnum, + interface->altsetting[0].desc.bInterfaceClass); + return -ENODEV; + } + + em28xx_err(DRIVER_NAME " new video device (%04x:%04x): interface %i, class %i\n", + udev->descriptor.idVendor,udev->descriptor.idProduct, + ifnum, + interface->altsetting[0].desc.bInterfaceClass); + + endpoint = &interface->cur_altsetting->endpoint[1].desc; + + /* check if the the device has the iso in endpoint at the correct place */ + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != + USB_ENDPOINT_XFER_ISOC) { + em28xx_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n"); + return -ENODEV; + } + if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) { + em28xx_err(DRIVER_NAME " probing error: endpoint is ISO OUT endpoint!\n"); + return -ENODEV; + } + + model=id->driver_info; + nr=interface->minor; + + if (nr>EM28XX_MAXBOARDS) { + printk (DRIVER_NAME ": Supports only %i em28xx boards.\n",EM28XX_MAXBOARDS); + return -ENOMEM; + } + + /* allocate memory for our device state and initialize it */ + dev = kmalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + em28xx_err(DRIVER_NAME ": out of memory!\n"); + return -ENOMEM; + } + memset(dev, 0, sizeof(*dev)); + + /* compute alternate max packet sizes */ + uif = udev->actconfig->interface[0]; + + dev->num_alt=uif->num_altsetting; + printk(DRIVER_NAME ": Alternate settings: %i\n",dev->num_alt); +// dev->alt_max_pkt_size = kmalloc(sizeof(*dev->alt_max_pkt_size)* + dev->alt_max_pkt_size = kmalloc(32* + dev->num_alt,GFP_KERNEL); + if (dev->alt_max_pkt_size == NULL) { + em28xx_err(DRIVER_NAME ": out of memory!\n"); + return -ENOMEM; + } + + for (i = 0; i < dev->num_alt ; i++) { + u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[1].desc. + wMaxPacketSize); + dev->alt_max_pkt_size[i] = + (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1); + printk(DRIVER_NAME ": Alternate setting %i, max size= %i\n",i, + dev->alt_max_pkt_size[i]); + } + + snprintf(dev->name, 29, "em28xx #%d", nr); + + if ((card[nr]>=0)&&(card[nr]<em28xx_bcount)) + model=card[nr]; + + if ((model==EM2800_BOARD_UNKNOWN)||(model==EM2820_BOARD_UNKNOWN)) { + printk( "%s: Your board has no eeprom inside it and thus can't\n" + "%s: be autodetected. Please pass card=<n> insmod option to\n" + "%s: workaround that. Redirect complaints to the vendor of\n" + "%s: the TV card. Best regards,\n" + "%s: -- tux\n", + dev->name,dev->name,dev->name,dev->name,dev->name); + printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n", + dev->name); + for (i = 0; i < em28xx_bcount; i++) { + printk("%s: card=%d -> %s\n", + dev->name, i, em28xx_boards[i].name); + } + } + + /* allocate device struct */ + retval = em28xx_init_dev(&dev, udev, nr, model); + if (retval) + return retval; + + em28xx_info("Found %s\n", em28xx_boards[model].name); + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, dev); + return 0; +} + +/* + * em28xx_usb_disconnect() + * called when the device gets diconencted + * video device will be unregistered on v4l2_close in case it is still open + */ +static void em28xx_usb_disconnect(struct usb_interface *interface) +{ + struct em28xx *dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + if (!dev) + return; + + down_write(&em28xx_disconnect); + + down(&dev->lock); + + em28xx_info("disconnecting %s\n", dev->vdev->name); + + wake_up_interruptible_all(&dev->open); + + if (dev->users) { + em28xx_warn + ("device /dev/video%d is open! Deregistration and memory " + "deallocation are deferred on close.\n", dev->vdev->minor); + dev->state |= DEV_MISCONFIGURED; + em28xx_uninit_isoc(dev); + dev->state |= DEV_DISCONNECTED; + wake_up_interruptible(&dev->wait_frame); + wake_up_interruptible(&dev->wait_stream); + } else { + dev->state |= DEV_DISCONNECTED; + em28xx_release_resources(dev); + } + + up(&dev->lock); + + if (!dev->users) { + kfree(dev->alt_max_pkt_size); + kfree(dev); + } + + up_write(&em28xx_disconnect); +} + +static struct usb_driver em28xx_usb_driver = { + .owner = THIS_MODULE, + .name = "em28xx", + .probe = em28xx_usb_probe, + .disconnect = em28xx_usb_disconnect, + .id_table = em28xx_id_table, +}; + +static int __init em28xx_module_init(void) +{ + int result; + + printk(KERN_INFO DRIVER_NAME " v4l2 driver version %d.%d.%d loaded\n", + (EM28XX_VERSION_CODE >> 16) & 0xff, + (EM28XX_VERSION_CODE >> 8) & 0xff, EM28XX_VERSION_CODE & 0xff); +#ifdef SNAPSHOT + printk(KERN_INFO DRIVER_NAME " snapshot date %04d-%02d-%02d\n", + SNAPSHOT / 10000, (SNAPSHOT / 100) % 100, SNAPSHOT % 100); +#endif + + /* register this driver with the USB subsystem */ + result = usb_register(&em28xx_usb_driver); + if (result) + em28xx_err(DRIVER_NAME + " usb_register failed. Error number %d.\n", result); + + return result; +} + +static void __exit em28xx_module_exit(void) +{ + /* deregister this driver with the USB subsystem */ + usb_deregister(&em28xx_usb_driver); +} + +module_init(em28xx_module_init); +module_exit(em28xx_module_exit); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h new file mode 100644 index 000000000000..5c7a41ce69f3 --- /dev/null +++ b/drivers/media/video/em28xx/em28xx.h @@ -0,0 +1,513 @@ +/* + em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB video capture devices + + Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com> + Ludovico Cavedon <cavedon@sssup.it> + Mauro Carvalho Chehab <mchehab@brturbo.com.br> + + Based on the em2800 driver from Sascha Sommer <saschasommer@freenet.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _EM28XX_H +#define _EM28XX_H + +#include <linux/videodev.h> +#include <linux/i2c.h> +#include <media/ir-kbd-i2c.h> + +/* Boards supported by driver */ + +#define EM2800_BOARD_UNKNOWN 0 +#define EM2820_BOARD_UNKNOWN 1 +#define EM2820_BOARD_TERRATEC_CINERGY_250 2 +#define EM2820_BOARD_PINNACLE_USB_2 3 +#define EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 4 +#define EM2820_BOARD_MSI_VOX_USB_2 5 +#define EM2800_BOARD_TERRATEC_CINERGY_200 6 +#define EM2800_BOARD_LEADTEK_WINFAST_USBII 7 +#define EM2800_BOARD_KWORLD_USB2800 8 +#define EM2820_BOARD_PINNACLE_DVC_90 9 + +#define UNSET -1 + +/* maximum number of em28xx boards */ +#define EM28XX_MAXBOARDS 1 /*FIXME: should be bigger */ + +/* maximum number of frames that can be queued */ +#define EM28XX_NUM_FRAMES 5 +/* number of frames that get used for v4l2_read() */ +#define EM28XX_NUM_READ_FRAMES 2 + +/* number of buffers for isoc transfers */ +#define EM28XX_NUM_BUFS 5 + +/* number of packets for each buffer + windows requests only 40 packets .. so we better do the same + this is what I found out for all alternate numbers there! + */ +#define EM28XX_NUM_PACKETS 40 + +/* default alternate; 0 means choose the best */ +#define EM28XX_PINOUT 0 + +#define EM28XX_INTERLACED_DEFAULT 1 + +/* +#define (use usbview if you want to get the other alternate number infos) +#define +#define alternate number 2 +#define Endpoint Address: 82 + Direction: in + Attribute: 1 + Type: Isoc + Max Packet Size: 1448 + Interval: 125us + + alternate number 7 + + Endpoint Address: 82 + Direction: in + Attribute: 1 + Type: Isoc + Max Packet Size: 3072 + Interval: 125us +*/ + +/* time to wait when stopping the isoc transfer */ +#define EM28XX_URB_TIMEOUT msecs_to_jiffies(EM28XX_NUM_BUFS * EM28XX_NUM_PACKETS) + +/* time in msecs to wait for i2c writes to finish */ +#define EM2800_I2C_WRITE_TIMEOUT 20 + +/* the various frame states */ +enum em28xx_frame_state { + F_UNUSED = 0, + F_QUEUED, + F_GRABBING, + F_DONE, + F_ERROR, +}; + +/* stream states */ +enum em28xx_stream_state { + STREAM_OFF, + STREAM_INTERRUPT, + STREAM_ON, +}; + +/* frames */ +struct em28xx_frame_t { + void *bufmem; + struct v4l2_buffer buf; + enum em28xx_frame_state state; + struct list_head frame; + unsigned long vma_use_count; + int top_field; + int fieldbytesused; +}; + +/* io methods */ +enum em28xx_io_method { + IO_NONE, + IO_READ, + IO_MMAP, +}; + +/* inputs */ + +#define MAX_EM28XX_INPUT 4 +enum enum28xx_itype { + EM28XX_VMUX_COMPOSITE1 = 1, + EM28XX_VMUX_COMPOSITE2, + EM28XX_VMUX_COMPOSITE3, + EM28XX_VMUX_COMPOSITE4, + EM28XX_VMUX_SVIDEO, + EM28XX_VMUX_TELEVISION, + EM28XX_VMUX_CABLE, + EM28XX_VMUX_DVB, + EM28XX_VMUX_DEBUG, + EM28XX_RADIO, +}; + +struct em28xx_input { + enum enum28xx_itype type; + unsigned int vmux; + unsigned int amux; +}; + +#define INPUT(nr) (&em28xx_boards[dev->model].input[nr]) + +enum em28xx_decoder { + EM28XX_TVP5150, + EM28XX_SAA7113, + EM28XX_SAA7114 +}; + +struct em28xx_board { + char *name; + int vchannels; + int norm; + int tuner_type; + + /* i2c flags */ + unsigned int is_em2800; + unsigned int tda9887_conf; + + unsigned int has_tuner:1; + unsigned int has_msp34xx:1; + + enum em28xx_decoder decoder; + + struct em28xx_input input[MAX_EM28XX_INPUT]; +}; + +struct em28xx_eeprom { + u32 id; /* 0x9567eb1a */ + u16 vendor_ID; + u16 product_ID; + + u16 chip_conf; + + u16 board_conf; + + u16 string1, string2, string3; + + u8 string_idx_table; +}; + +/* device states */ +enum em28xx_dev_state { + DEV_INITIALIZED = 0x01, + DEV_DISCONNECTED = 0x02, + DEV_MISCONFIGURED = 0x04, +}; + +/* tvnorms */ +struct em28xx_tvnorm { + char *name; + v4l2_std_id id; + /* mode for saa7113h */ + int mode; +}; + +/* main device struct */ +struct em28xx { + /* generic device properties */ + char name[30]; /* name (including minor) of the device */ + int model; /* index in the device_data struct */ + unsigned int is_em2800; + int video_inputs; /* number of video inputs */ + struct list_head devlist; + unsigned int has_tuner:1; + unsigned int has_msp34xx:1; + unsigned int has_tda9887:1; + + enum em28xx_decoder decoder; + + int tuner_type; /* type of the tuner */ + int tuner_addr; /* tuner address */ + int tda9887_conf; + /* i2c i/o */ + struct i2c_adapter i2c_adap; + struct i2c_client i2c_client; + /* video for linux */ + int users; /* user count for exclusive use */ + struct video_device *vdev; /* video for linux device struct */ + struct video_picture vpic; /* picture settings only used to init saa7113h */ + struct em28xx_tvnorm *tvnorm; /* selected tv norm */ + int ctl_freq; /* selected frequency */ + unsigned int ctl_input; /* selected input */ + unsigned int ctl_ainput; /* slected audio input */ + int mute; + int volume; + /* frame properties */ + struct em28xx_frame_t frame[EM28XX_NUM_FRAMES]; /* list of frames */ + int num_frames; /* number of frames currently in use */ + unsigned int frame_count; /* total number of transfered frames */ + struct em28xx_frame_t *frame_current; /* the frame that is being filled */ + int width; /* current frame width */ + int height; /* current frame height */ + int frame_size; /* current frame size */ + int field_size; /* current field size */ + int bytesperline; + int hscale; /* horizontal scale factor (see datasheet) */ + int vscale; /* vertical scale factor (see datasheet) */ + int interlaced; /* 1=interlace fileds, 0=just top fileds */ + int type; + + /* states */ + enum em28xx_dev_state state; + enum em28xx_stream_state stream; + enum em28xx_io_method io; + /* locks */ + struct semaphore lock, fileop_lock; + spinlock_t queue_lock; + struct list_head inqueue, outqueue; + wait_queue_head_t open, wait_frame, wait_stream; + struct video_device *vbi_dev; + + unsigned char eedata[256]; + + /* usb transfer */ + struct usb_device *udev; /* the usb device */ + int alt; /* alternate */ + int max_pkt_size; /* max packet size of isoc transaction */ + int num_alt; /* Number of alternative settings */ + unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */ + struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */ + char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc transfer */ + /* helper funcs that call usb_control_msg */ + int (*em28xx_write_regs) (struct em28xx * dev, u16 reg, char *buf, + int len); + int (*em28xx_read_reg) (struct em28xx * dev, u16 reg); + int (*em28xx_read_reg_req_len) (struct em28xx * dev, u8 req, u16 reg, + char *buf, int len); + int (*em28xx_write_regs_req) (struct em28xx * dev, u8 req, u16 reg, + char *buf, int len); + int (*em28xx_read_reg_req) (struct em28xx * dev, u8 req, u16 reg); +}; + +/* Provided by em28xx-i2c.c */ + +void em28xx_i2c_call_clients(struct em28xx *dev, unsigned int cmd, void *arg); +int em28xx_i2c_register(struct em28xx *dev); +int em28xx_i2c_unregister(struct em28xx *dev); + +/* Provided by em28xx-input.c */ + +void em28xx_set_ir(struct em28xx * dev,struct IR_i2c *ir); + +/* Provided by em28xx-core.c */ + +void em28xx_print_ioctl(char *name, unsigned int cmd); + +u32 em28xx_request_buffers(struct em28xx *dev, u32 count); +void em28xx_queue_unusedframes(struct em28xx *dev); +void em28xx_release_buffers(struct em28xx *dev); + +int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg, + char *buf, int len); +int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg); +int em28xx_read_reg(struct em28xx *dev, u16 reg); +int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, + int len); +int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len); +int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val, + u8 bitmask); +int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 * val); +int em28xx_audio_analog_set(struct em28xx *dev); +int em28xx_colorlevels_set_default(struct em28xx *dev); +int em28xx_capture_start(struct em28xx *dev, int start); +int em28xx_outfmt_set_yuv422(struct em28xx *dev); +int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax, u8 ymin, + u8 ymax); +int em28xx_capture_area_set(struct em28xx *dev, u8 hstart, u8 vstart, + u16 width, u16 height); +int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v); +int em28xx_resolution_set(struct em28xx *dev); +void em28xx_isocIrq(struct urb *urb, struct pt_regs *regs); +int em28xx_init_isoc(struct em28xx *dev); +void em28xx_uninit_isoc(struct em28xx *dev); +int em28xx_set_alternate(struct em28xx *dev); + +/* Provided by em28xx-cards.c */ +extern int em2800_variant_detect(struct usb_device* udev,int model); +extern void em28xx_card_setup(struct em28xx *dev); +extern struct em28xx_board em28xx_boards[]; +extern struct usb_device_id em28xx_id_table[]; +extern const unsigned int em28xx_bcount; + +/* em28xx registers */ +#define CHIPID_REG 0x0a +#define USBSUSP_REG 0x0c /* */ + +#define AUDIOSRC_REG 0x0e +#define XCLK_REG 0x0f + +#define VINMODE_REG 0x10 +#define VINCTRL_REG 0x11 +#define VINENABLE_REG 0x12 /* */ + +#define GAMMA_REG 0x14 +#define RGAIN_REG 0x15 +#define GGAIN_REG 0x16 +#define BGAIN_REG 0x17 +#define ROFFSET_REG 0x18 +#define GOFFSET_REG 0x19 +#define BOFFSET_REG 0x1a + +#define OFLOW_REG 0x1b +#define HSTART_REG 0x1c +#define VSTART_REG 0x1d +#define CWIDTH_REG 0x1e +#define CHEIGHT_REG 0x1f + +#define YGAIN_REG 0x20 +#define YOFFSET_REG 0x21 +#define UVGAIN_REG 0x22 +#define UOFFSET_REG 0x23 +#define VOFFSET_REG 0x24 +#define SHARPNESS_REG 0x25 + +#define COMPR_REG 0x26 +#define OUTFMT_REG 0x27 + +#define XMIN_REG 0x28 +#define XMAX_REG 0x29 +#define YMIN_REG 0x2a +#define YMAX_REG 0x2b + +#define HSCALELOW_REG 0x30 +#define HSCALEHIGH_REG 0x31 +#define VSCALELOW_REG 0x32 +#define VSCALEHIGH_REG 0x33 + +#define AC97LSB_REG 0x40 +#define AC97MSB_REG 0x41 +#define AC97ADDR_REG 0x42 +#define AC97BUSY_REG 0x43 + +/* em202 registers */ +#define MASTER_AC97 0x02 +#define VIDEO_AC97 0x14 + +/* register settings */ +#define EM28XX_AUDIO_SRC_TUNER 0xc0 +#define EM28XX_AUDIO_SRC_LINE 0x80 + +/* printk macros */ + +#define em28xx_err(fmt, arg...) do {\ + printk(KERN_ERR fmt , ##arg); } while (0) + +#define em28xx_errdev(fmt, arg...) do {\ + printk(KERN_ERR "%s: "fmt,\ + dev->name , ##arg); } while (0) + +#define em28xx_info(fmt, arg...) do {\ + printk(KERN_INFO "%s: "fmt,\ + dev->name , ##arg); } while (0) +#define em28xx_warn(fmt, arg...) do {\ + printk(KERN_WARNING "%s: "fmt,\ + dev->name , ##arg); } while (0) + +inline static int em28xx_audio_source(struct em28xx *dev, int input) +{ + return em28xx_write_reg_bits(dev, AUDIOSRC_REG, input, 0xc0); +} + +inline static int em28xx_audio_usb_mute(struct em28xx *dev, int mute) +{ + return em28xx_write_reg_bits(dev, XCLK_REG, mute ? 0x00 : 0x80, 0x80); +} + +inline static int em28xx_audio_analog_setup(struct em28xx *dev) +{ + /* unmute video mixer with default volume level */ + return em28xx_write_ac97(dev, VIDEO_AC97, "\x08\x08"); +} + +inline static int em28xx_compression_disable(struct em28xx *dev) +{ + /* side effect of disabling scaler and mixer */ + return em28xx_write_regs(dev, COMPR_REG, "\x00", 1); +} + +inline static int em28xx_contrast_get(struct em28xx *dev) +{ + return em28xx_read_reg(dev, YGAIN_REG) & 0x1f; +} + +inline static int em28xx_brightness_get(struct em28xx *dev) +{ + return em28xx_read_reg(dev, YOFFSET_REG); +} + +inline static int em28xx_saturation_get(struct em28xx *dev) +{ + return em28xx_read_reg(dev, UVGAIN_REG) & 0x1f; +} + +inline static int em28xx_u_balance_get(struct em28xx *dev) +{ + return em28xx_read_reg(dev, UOFFSET_REG); +} + +inline static int em28xx_v_balance_get(struct em28xx *dev) +{ + return em28xx_read_reg(dev, VOFFSET_REG); +} + +inline static int em28xx_gamma_get(struct em28xx *dev) +{ + return em28xx_read_reg(dev, GAMMA_REG) & 0x3f; +} + +inline static int em28xx_contrast_set(struct em28xx *dev, s32 val) +{ + u8 tmp = (u8) val; + return em28xx_write_regs(dev, YGAIN_REG, &tmp, 1); +} + +inline static int em28xx_brightness_set(struct em28xx *dev, s32 val) +{ + u8 tmp = (u8) val; + return em28xx_write_regs(dev, YOFFSET_REG, &tmp, 1); +} + +inline static int em28xx_saturation_set(struct em28xx *dev, s32 val) +{ + u8 tmp = (u8) val; + return em28xx_write_regs(dev, UVGAIN_REG, &tmp, 1); +} + +inline static int em28xx_u_balance_set(struct em28xx *dev, s32 val) +{ + u8 tmp = (u8) val; + return em28xx_write_regs(dev, UOFFSET_REG, &tmp, 1); +} + +inline static int em28xx_v_balance_set(struct em28xx *dev, s32 val) +{ + u8 tmp = (u8) val; + return em28xx_write_regs(dev, VOFFSET_REG, &tmp, 1); +} + +inline static int em28xx_gamma_set(struct em28xx *dev, s32 val) +{ + u8 tmp = (u8) val; + return em28xx_write_regs(dev, GAMMA_REG, &tmp, 1); +} + +/*FIXME: maxw should be dependent of alt mode */ +inline static unsigned int norm_maxw(struct em28xx *dev) +{ + switch(dev->model){ + case (EM2820_BOARD_MSI_VOX_USB_2): return(640); + default: return(720); + } +} + +inline static unsigned int norm_maxh(struct em28xx *dev) +{ + switch(dev->model){ + case (EM2820_BOARD_MSI_VOX_USB_2): return(480); + default: return (dev->tvnorm->id & V4L2_STD_625_50) ? 576 : 480; + } +} + +#endif diff --git a/drivers/media/video/ir-kbd-gpio.c b/drivers/media/video/ir-kbd-gpio.c index 234151e48edc..ed81934ef3cd 100644 --- a/drivers/media/video/ir-kbd-gpio.c +++ b/drivers/media/video/ir-kbd-gpio.c @@ -156,6 +156,71 @@ static IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE] = { /* ---------------------------------------------------------------------- */ +/* Ricardo Cerqueira <v4l@cerqueira.org> */ +/* Weird matching, since the remote has "uncommon" keys */ + +static IR_KEYTAB_TYPE ir_codes_conceptronic[IR_KEYTAB_SIZE] = { + + [ 30 ] = KEY_POWER, // power + [ 7 ] = KEY_MEDIA, // source + [ 28 ] = KEY_SEARCH, // scan + +/* FIXME: duplicate keycodes? + * + * These four keys seem to share the same GPIO as CH+, CH-, <<< and >>> + * The GPIO values are + * 6397fb for both "Scan <" and "CH -", + * 639ffb for "Scan >" and "CH+", + * 6384fb for "Tune <" and "<<<", + * 638cfb for "Tune >" and ">>>", regardless of the mask. + * + * [ 23 ] = KEY_BACK, // fm scan << + * [ 31 ] = KEY_FORWARD, // fm scan >> + * + * [ 4 ] = KEY_LEFT, // fm tuning < + * [ 12 ] = KEY_RIGHT, // fm tuning > + * + * For now, these four keys are disabled. Pressing them will generate + * the CH+/CH-/<<</>>> events + */ + + [ 3 ] = KEY_TUNER, // TV/FM + + [ 0 ] = KEY_RECORD, + [ 8 ] = KEY_STOP, + [ 17 ] = KEY_PLAY, + + [ 26 ] = KEY_PLAYPAUSE, // freeze + [ 25 ] = KEY_ZOOM, // zoom + [ 15 ] = KEY_TEXT, // min + + [ 1 ] = KEY_KP1, + [ 11 ] = KEY_KP2, + [ 27 ] = KEY_KP3, + [ 5 ] = KEY_KP4, + [ 9 ] = KEY_KP5, + [ 21 ] = KEY_KP6, + [ 6 ] = KEY_KP7, + [ 10 ] = KEY_KP8, + [ 18 ] = KEY_KP9, + [ 2 ] = KEY_KP0, + [ 16 ] = KEY_LAST, // +100 + [ 19 ] = KEY_LIST, // recall + + [ 31 ] = KEY_CHANNELUP, // chn down + [ 23 ] = KEY_CHANNELDOWN, // chn up + [ 22 ] = KEY_VOLUMEUP, // vol down + [ 20 ] = KEY_VOLUMEDOWN, // vol up + + [ 4 ] = KEY_KPMINUS, // <<< + [ 14 ] = KEY_SETUP, // function + [ 12 ] = KEY_KPPLUS, // >>> + + [ 13 ] = KEY_GOTO, // mts + [ 29 ] = KEY_REFRESH, // reset + [ 24 ] = KEY_MUTE // mute/unmute +}; + struct IR { struct bttv_sub_device *sub; struct input_dev *input; @@ -282,53 +347,59 @@ static int ir_probe(struct device *dev) /* detect & configure */ switch (sub->core->type) { - case BTTV_AVERMEDIA: - case BTTV_AVPHONE98: - case BTTV_AVERMEDIA98: + case BTTV_BOARD_AVERMEDIA: + case BTTV_BOARD_AVPHONE98: + case BTTV_BOARD_AVERMEDIA98: ir_codes = ir_codes_avermedia; ir->mask_keycode = 0xf88000; ir->mask_keydown = 0x010000; ir->polling = 50; // ms break; - case BTTV_AVDVBT_761: - case BTTV_AVDVBT_771: + case BTTV_BOARD_AVDVBT_761: + case BTTV_BOARD_AVDVBT_771: ir_codes = ir_codes_avermedia_dvbt; ir->mask_keycode = 0x0f00c0; ir->mask_keydown = 0x000020; ir->polling = 50; // ms break; - case BTTV_PXELVWPLTVPAK: + case BTTV_BOARD_PXELVWPLTVPAK: ir_codes = ir_codes_pixelview; ir->mask_keycode = 0x003e00; ir->mask_keyup = 0x010000; ir->polling = 50; // ms - break; - case BTTV_PV_BT878P_9B: - case BTTV_PV_BT878P_PLUS: + break; + case BTTV_BOARD_PV_BT878P_9B: + case BTTV_BOARD_PV_BT878P_PLUS: ir_codes = ir_codes_pixelview; ir->mask_keycode = 0x001f00; ir->mask_keyup = 0x008000; ir->polling = 50; // ms - break; + break; - case BTTV_WINFAST2000: + case BTTV_BOARD_WINFAST2000: ir_codes = ir_codes_winfast; ir->mask_keycode = 0x1f8; break; - case BTTV_MAGICTVIEW061: - case BTTV_MAGICTVIEW063: + case BTTV_BOARD_MAGICTVIEW061: + case BTTV_BOARD_MAGICTVIEW063: ir_codes = ir_codes_winfast; ir->mask_keycode = 0x0008e000; ir->mask_keydown = 0x00200000; break; - case BTTV_APAC_VIEWCOMP: + case BTTV_BOARD_APAC_VIEWCOMP: ir_codes = ir_codes_apac_viewcomp; ir->mask_keycode = 0x001f00; ir->mask_keyup = 0x008000; ir->polling = 50; // ms break; + case BTTV_BOARD_CONCEPTRONIC_CTVFMI2: + ir_codes = ir_codes_conceptronic; + ir->mask_keycode = 0x001F00; + ir->mask_keyup = 0x006000; + ir->polling = 50; // ms + break; } if (NULL == ir_codes) { kfree(ir); diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index 9703d3d351f9..0085567a1421 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -8,6 +8,8 @@ * Christoph Bartelmus <lirc@bartelmus.de> * modified for KNC ONE TV Station/Anubis Typhoon TView Tuner by * Ulrich Mueller <ulrich.mueller42@web.de> + * modified for em2820 based USB TV tuners by + * Markus Rechberger <mrechberger@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -37,10 +39,9 @@ #include <linux/slab.h> #include <linux/i2c.h> #include <linux/workqueue.h> - #include <asm/semaphore.h> - #include <media/ir-common.h> +#include <media/ir-kbd-i2c.h> /* Mark Phalan <phalanm@o2.ie> */ static IR_KEYTAB_TYPE ir_codes_pv951[IR_KEYTAB_SIZE] = { @@ -81,57 +82,6 @@ static IR_KEYTAB_TYPE ir_codes_pv951[IR_KEYTAB_SIZE] = { [ 28 ] = KEY_MEDIA, /* PC/TV */ }; -static IR_KEYTAB_TYPE ir_codes_purpletv[IR_KEYTAB_SIZE] = { - [ 0x3 ] = KEY_POWER, - [ 0x6f ] = KEY_MUTE, - [ 0x10 ] = KEY_BACKSPACE, /* Recall */ - - [ 0x11 ] = KEY_KP0, - [ 0x4 ] = KEY_KP1, - [ 0x5 ] = KEY_KP2, - [ 0x6 ] = KEY_KP3, - [ 0x8 ] = KEY_KP4, - [ 0x9 ] = KEY_KP5, - [ 0xa ] = KEY_KP6, - [ 0xc ] = KEY_KP7, - [ 0xd ] = KEY_KP8, - [ 0xe ] = KEY_KP9, - [ 0x12 ] = KEY_KPDOT, /* 100+ */ - - [ 0x7 ] = KEY_VOLUMEUP, - [ 0xb ] = KEY_VOLUMEDOWN, - [ 0x1a ] = KEY_KPPLUS, - [ 0x18 ] = KEY_KPMINUS, - [ 0x15 ] = KEY_UP, - [ 0x1d ] = KEY_DOWN, - [ 0xf ] = KEY_CHANNELUP, - [ 0x13 ] = KEY_CHANNELDOWN, - [ 0x48 ] = KEY_ZOOM, - - [ 0x1b ] = KEY_VIDEO, /* Video source */ - [ 0x49 ] = KEY_LANGUAGE, /* MTS Select */ - [ 0x19 ] = KEY_SEARCH, /* Auto Scan */ - - [ 0x4b ] = KEY_RECORD, - [ 0x46 ] = KEY_PLAY, - [ 0x45 ] = KEY_PAUSE, /* Pause */ - [ 0x44 ] = KEY_STOP, - [ 0x40 ] = KEY_FORWARD, /* Forward ? */ - [ 0x42 ] = KEY_REWIND, /* Backward ? */ - -}; - -struct IR { - struct i2c_client c; - struct input_dev *input; - struct ir_input_state ir; - - struct work_struct work; - struct timer_list timer; - char phys[32]; - int (*get_key)(struct IR*, u32*, u32*); -}; - /* ----------------------------------------------------------------------- */ /* insmod parameters */ @@ -144,7 +94,7 @@ module_param(debug, int, 0644); /* debug level (0,1,2) */ /* ----------------------------------------------------------------------- */ -static int get_key_haup(struct IR *ir, u32 *ir_key, u32 *ir_raw) +static int get_key_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) { unsigned char buf[3]; int start, toggle, dev, code; @@ -171,9 +121,9 @@ static int get_key_haup(struct IR *ir, u32 *ir_key, u32 *ir_raw) return 1; } -static int get_key_pixelview(struct IR *ir, u32 *ir_key, u32 *ir_raw) +static int get_key_pixelview(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) { - unsigned char b; + unsigned char b; /* poll IR chip */ if (1 != i2c_master_recv(&ir->c,&b,1)) { @@ -185,9 +135,9 @@ static int get_key_pixelview(struct IR *ir, u32 *ir_key, u32 *ir_raw) return 1; } -static int get_key_pv951(struct IR *ir, u32 *ir_key, u32 *ir_raw) +static int get_key_pv951(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) { - unsigned char b; + unsigned char b; /* poll IR chip */ if (1 != i2c_master_recv(&ir->c,&b,1)) { @@ -205,7 +155,7 @@ static int get_key_pv951(struct IR *ir, u32 *ir_key, u32 *ir_raw) return 1; } -static int get_key_knc1(struct IR *ir, u32 *ir_key, u32 *ir_raw) +static int get_key_knc1(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) { unsigned char b; @@ -216,15 +166,15 @@ static int get_key_knc1(struct IR *ir, u32 *ir_key, u32 *ir_raw) } /* it seems that 0xFE indicates that a button is still hold - down, while 0xFF indicates that no button is hold - down. 0xFE sequences are sometimes interrupted by 0xFF */ + down, while 0xff indicates that no button is hold + down. 0xfe sequences are sometimes interrupted by 0xFF */ dprintk(2,"key %02x\n", b); - if (b == 0xFF) + if (b == 0xff) return 0; - if (b == 0xFE) + if (b == 0xfe) /* keep old data */ return 1; @@ -233,31 +183,9 @@ static int get_key_knc1(struct IR *ir, u32 *ir_key, u32 *ir_raw) return 1; } -static int get_key_purpletv(struct IR *ir, u32 *ir_key, u32 *ir_raw) -{ - unsigned char b; - - /* poll IR chip */ - if (1 != i2c_master_recv(&ir->c,&b,1)) { - dprintk(1,"read error\n"); - return -EIO; - } - - /* no button press */ - if (b==0) - return 0; - - /* repeating */ - if (b & 0x80) - return 1; - - *ir_key = b; - *ir_raw = b; - return 1; -} /* ----------------------------------------------------------------------- */ -static void ir_key_poll(struct IR *ir) +static void ir_key_poll(struct IR_i2c *ir) { static u32 ir_key, ir_raw; int rc; @@ -278,13 +206,13 @@ static void ir_key_poll(struct IR *ir) static void ir_timer(unsigned long data) { - struct IR *ir = (struct IR*)data; + struct IR_i2c *ir = (struct IR_i2c*)data; schedule_work(&ir->work); } static void ir_work(void *data) { - struct IR *ir = data; + struct IR_i2c *ir = data; ir_key_poll(ir); mod_timer(&ir->timer, jiffies+HZ/10); } @@ -297,17 +225,17 @@ static int ir_detach(struct i2c_client *client); static int ir_probe(struct i2c_adapter *adap); static struct i2c_driver driver = { - .name = "ir remote kbd driver", - .id = I2C_DRIVERID_EXP3, /* FIXME */ - .flags = I2C_DF_NOTIFY, - .attach_adapter = ir_probe, - .detach_client = ir_detach, + .name = "ir remote kbd driver", + .id = I2C_DRIVERID_EXP3, /* FIXME */ + .flags = I2C_DF_NOTIFY, + .attach_adapter = ir_probe, + .detach_client = ir_detach, }; static struct i2c_client client_template = { - .name = "unset", - .driver = &driver + .name = "unset", + .driver = &driver }; static int ir_attach(struct i2c_adapter *adap, int addr, @@ -316,10 +244,10 @@ static int ir_attach(struct i2c_adapter *adap, int addr, IR_KEYTAB_TYPE *ir_codes = NULL; char *name; int ir_type; - struct IR *ir; + struct IR_i2c *ir; struct input_dev *input_dev; - ir = kzalloc(sizeof(struct IR), GFP_KERNEL); + ir = kzalloc(sizeof(struct IR_i2c), GFP_KERNEL); input_dev = input_allocate_device(); if (!ir || !input_dev) { kfree(ir); @@ -361,10 +289,10 @@ static int ir_attach(struct i2c_adapter *adap, int addr, ir_codes = ir_codes_empty; break; case 0x7a: - name = "Purple TV"; - ir->get_key = get_key_purpletv; + case 0x47: + /* Handled by saa7134-input */ + name = "SAA713x remote"; ir_type = IR_TYPE_OTHER; - ir_codes = ir_codes_purpletv; break; default: /* shouldn't happen */ @@ -373,9 +301,24 @@ static int ir_attach(struct i2c_adapter *adap, int addr, return -1; } - /* register i2c device */ - i2c_attach_client(&ir->c); + /* Sets name */ snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (%s)", name); + ir->ir_codes=ir_codes; + + /* register i2c device + * At device register, IR codes may be changed to be + * board dependent. + */ + i2c_attach_client(&ir->c); + + /* If IR not supported or disabled, unregisters driver */ + if (ir->get_key == NULL) { + i2c_detach_client(&ir->c); + kfree(ir); + return -1; + } + + /* Phys addr can only be set after attaching (for ir->c.dev.bus_id) */ snprintf(ir->phys, sizeof(ir->phys), "%s/%s/ir0", ir->c.adapter->dev.bus_id, ir->c.dev.bus_id); @@ -386,6 +329,7 @@ static int ir_attach(struct i2c_adapter *adap, int addr, input_dev->name = ir->c.name; input_dev->phys = ir->phys; + /* register event device */ input_register_device(ir->input); /* start polling via eventd */ @@ -400,7 +344,7 @@ static int ir_attach(struct i2c_adapter *adap, int addr, static int ir_detach(struct i2c_client *client) { - struct IR *ir = i2c_get_clientdata(client); + struct IR_i2c *ir = i2c_get_clientdata(client); /* kill outstanding polls */ del_timer(&ir->timer); @@ -428,9 +372,12 @@ static int ir_probe(struct i2c_adapter *adap) */ static const int probe_bttv[] = { 0x1a, 0x18, 0x4b, 0x64, 0x30, -1}; - static const int probe_saa7134[] = { 0x7a, -1 }; + static const int probe_saa7134[] = { 0x7a, 0x47, -1 }; + static const int probe_em28XX[] = { 0x30, 0x47, -1 }; const int *probe = NULL; - struct i2c_client c; char buf; int i,rc; + struct i2c_client c; + unsigned char buf; + int i,rc; switch (adap->id) { case I2C_HW_B_BT848: @@ -439,6 +386,9 @@ static int ir_probe(struct i2c_adapter *adap) case I2C_HW_SAA7134: probe = probe_saa7134; break; + case I2C_HW_B_EM28XX: + probe = probe_em28XX; + break; } if (NULL == probe) return 0; @@ -447,11 +397,11 @@ static int ir_probe(struct i2c_adapter *adap) c.adapter = adap; for (i = 0; -1 != probe[i]; i++) { c.addr = probe[i]; - rc = i2c_master_recv(&c,&buf,1); + rc = i2c_master_recv(&c,&buf,0); dprintk(1,"probe 0x%02x @ %s: %s\n", probe[i], adap->name, - (1 == rc) ? "yes" : "no"); - if (1 == rc) { + (0 == rc) ? "yes" : "no"); + if (0 == rc) { ir_attach(adap,probe[i],0,0); break; } diff --git a/drivers/media/video/msp3400.c b/drivers/media/video/msp3400.c index e75e7948fd9d..a23fb0338986 100644 --- a/drivers/media/video/msp3400.c +++ b/drivers/media/video/msp3400.c @@ -54,9 +54,41 @@ #include <asm/pgtable.h> #include <media/audiochip.h> -#include <media/id.h> #include "msp3400.h" +#define msp3400_dbg(fmt, arg...) \ + do { \ + if (debug) \ + printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); \ + } while (0) + +/* Medium volume debug. */ +#define msp3400_dbg_mediumvol(fmt, arg...) \ + do { \ + if (debug >= 2) \ + printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); \ + } while (0) + +/* High volume debug. Use with care. */ +#define msp3400_dbg_highvol(fmt, arg...) \ + do { \ + if (debug >= 16) \ + printk(KERN_INFO "%s debug %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); \ + } while (0) + +#define msp3400_err(fmt, arg...) do { \ + printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0) +#define msp3400_warn(fmt, arg...) do { \ + printk(KERN_WARNING "%s %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0) +#define msp3400_info(fmt, arg...) do { \ + printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0) + #define OPMODE_AUTO -1 #define OPMODE_MANUAL 0 #define OPMODE_SIMPLE 1 /* use short programming (>= msp3410 only) */ @@ -73,15 +105,26 @@ static int dolby = 0; static int stereo_threshold = 0x190; /* a2 threshold for stereo/bilingual (msp34xxg only) 0x00a0-0x03c0 */ +#define DFP_COUNT 0x41 +static const int bl_dfp[] = { + 0x00, 0x01, 0x02, 0x03, 0x06, 0x08, 0x09, 0x0a, + 0x0b, 0x0d, 0x0e, 0x10 +}; + +#define IS_MSP34XX_G(msp) ((msp)->opmode==2) struct msp3400c { int rev1,rev2; int opmode; + int nicam; int mode; int norm; + int stereo; int nicam_on; int acb; + int in_scart; + int i2s_mode; int main, second; /* sound carrier */ int input; int source; /* see msp34xxg_set_source */ @@ -91,9 +134,12 @@ struct msp3400c { int rxsubchans; int muted; - int volume, balance; + int left, right; /* volume */ int bass, treble; + /* shadow register set */ + int dfp_regs[DFP_COUNT]; + /* thread */ struct task_struct *kthread; wait_queue_head_t wq; @@ -101,6 +147,8 @@ struct msp3400c { int watch_stereo:1; }; +#define MIN(a,b) (((a)>(b))?(b):(a)) +#define MAX(a,b) (((a)>(b))?(a):(b)) #define HAVE_NICAM(msp) (((msp->rev2>>8) & 0xff) != 00) #define HAVE_SIMPLE(msp) ((msp->rev1 & 0xff) >= 'D'-'@') #define HAVE_SIMPLER(msp) ((msp->rev1 & 0xff) >= 'G'-'@') @@ -110,9 +158,6 @@ struct msp3400c { /* ---------------------------------------------------------------------- */ -#define dprintk if (debug >= 1) printk -#define d2printk if (debug >= 2) printk - /* read-only */ module_param(opmode, int, 0444); @@ -132,11 +177,6 @@ MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Defau MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan"); MODULE_PARM_DESC(dolby, "Activates Dolby processsing"); - -MODULE_DESCRIPTION("device driver for msp34xx TV sound processor"); -MODULE_AUTHOR("Gerd Knorr"); -MODULE_LICENSE("Dual BSD/GPL"); /* FreeBSD uses this too */ - /* ---------------------------------------------------------------------- */ #define I2C_MSP3400C 0x80 @@ -153,6 +193,10 @@ static unsigned short normal_i2c[] = { }; I2C_CLIENT_INSMOD; +MODULE_DESCRIPTION("device driver for msp34xx TV sound processor"); +MODULE_AUTHOR("Gerd Knorr"); +MODULE_LICENSE("GPL"); + /* ----------------------------------------------------------------------- */ /* functions for talking to the MSP3400C Sound processor */ @@ -172,68 +216,73 @@ static int msp3400c_reset(struct i2c_client *client) { client->addr, I2C_M_RD, 2, read }, }; + msp3400_dbg_highvol("msp3400c_reset\n"); if ( (1 != i2c_transfer(client->adapter,&reset[0],1)) || (1 != i2c_transfer(client->adapter,&reset[1],1)) || (2 != i2c_transfer(client->adapter,test,2)) ) { - printk(KERN_ERR "msp3400: chip reset failed\n"); + msp3400_err("chip reset failed\n"); return -1; - } + } return 0; } -static int -msp3400c_read(struct i2c_client *client, int dev, int addr) +static int msp3400c_read(struct i2c_client *client, int dev, int addr) { - int err; + int err,retval; + + unsigned char write[3]; + unsigned char read[2]; + struct i2c_msg msgs[2] = { + { client->addr, 0, 3, write }, + { client->addr, I2C_M_RD, 2, read } + }; - unsigned char write[3]; - unsigned char read[2]; - struct i2c_msg msgs[2] = { - { client->addr, 0, 3, write }, - { client->addr, I2C_M_RD, 2, read } - }; - write[0] = dev+1; - write[1] = addr >> 8; - write[2] = addr & 0xff; + write[0] = dev+1; + write[1] = addr >> 8; + write[2] = addr & 0xff; for (err = 0; err < 3;) { if (2 == i2c_transfer(client->adapter,msgs,2)) break; err++; - printk(KERN_WARNING "msp34xx: I/O error #%d (read 0x%02x/0x%02x)\n", - err, dev, addr); - msleep(10); + msp3400_warn("I/O error #%d (read 0x%02x/0x%02x)\n", err, + dev, addr); + current->state = TASK_INTERRUPTIBLE; + schedule_timeout(msecs_to_jiffies(10)); } if (3 == err) { - printk(KERN_WARNING "msp34xx: giving up, reseting chip. Sound will go off, sorry folks :-|\n"); + msp3400_warn("giving up, resetting chip. Sound will go off, sorry folks :-|\n"); msp3400c_reset(client); return -1; } - return read[0] << 8 | read[1]; + retval = read[0] << 8 | read[1]; + msp3400_dbg_highvol("msp3400c_read(0x%x, 0x%x): 0x%x\n", dev, addr, retval); + return retval; } -static int -msp3400c_write(struct i2c_client *client, int dev, int addr, int val) +static int msp3400c_write(struct i2c_client *client, int dev, int addr, int val) { int err; - unsigned char buffer[5]; + unsigned char buffer[5]; - buffer[0] = dev; - buffer[1] = addr >> 8; - buffer[2] = addr & 0xff; - buffer[3] = val >> 8; - buffer[4] = val & 0xff; + buffer[0] = dev; + buffer[1] = addr >> 8; + buffer[2] = addr & 0xff; + buffer[3] = val >> 8; + buffer[4] = val & 0xff; + msp3400_dbg_highvol("msp3400c_write(0x%x, 0x%x, 0x%x)\n", dev, addr, val); for (err = 0; err < 3;) { if (5 == i2c_master_send(client, buffer, 5)) break; err++; - printk(KERN_WARNING "msp34xx: I/O error #%d (write 0x%02x/0x%02x)\n", - err, dev, addr); - msleep(10); + msp3400_warn("I/O error #%d (write 0x%02x/0x%02x)\n", err, + dev, addr); + current->state = TASK_INTERRUPTIBLE; + schedule_timeout(msecs_to_jiffies(10)); } if (3 == err) { - printk(KERN_WARNING "msp34xx: giving up, reseting chip. Sound will go off, sorry folks :-|\n"); + msp3400_warn("giving up, reseting chip. Sound will go off, sorry folks :-|\n"); msp3400c_reset(client); return -1; } @@ -266,45 +315,47 @@ static struct MSP_INIT_DATA_DEM { int dfp_src; int dfp_matrix; } msp_init_data[] = { - /* AM (for carrier detect / msp3400) */ - { { 75, 19, 36, 35, 39, 40 }, { 75, 19, 36, 35, 39, 40 }, - MSP_CARRIER(5.5), MSP_CARRIER(5.5), - 0x00d0, 0x0500, 0x0020, 0x3000}, - - /* AM (for carrier detect / msp3410) */ - { { -1, -1, -8, 2, 59, 126 }, { -1, -1, -8, 2, 59, 126 }, - MSP_CARRIER(5.5), MSP_CARRIER(5.5), - 0x00d0, 0x0100, 0x0020, 0x3000}, - - /* FM Radio */ - { { -8, -8, 4, 6, 78, 107 }, { -8, -8, 4, 6, 78, 107 }, - MSP_CARRIER(10.7), MSP_CARRIER(10.7), - 0x00d0, 0x0480, 0x0020, 0x3000 }, - - /* Terrestial FM-mono + FM-stereo */ - { { 3, 18, 27, 48, 66, 72 }, { 3, 18, 27, 48, 66, 72 }, - MSP_CARRIER(5.5), MSP_CARRIER(5.5), - 0x00d0, 0x0480, 0x0030, 0x3000}, - - /* Sat FM-mono */ - { { 1, 9, 14, 24, 33, 37 }, { 3, 18, 27, 48, 66, 72 }, - MSP_CARRIER(6.5), MSP_CARRIER(6.5), - 0x00c6, 0x0480, 0x0000, 0x3000}, - - /* NICAM/FM -- B/G (5.5/5.85), D/K (6.5/5.85) */ - { { -2, -8, -10, 10, 50, 86 }, { 3, 18, 27, 48, 66, 72 }, - MSP_CARRIER(5.5), MSP_CARRIER(5.5), - 0x00d0, 0x0040, 0x0120, 0x3000}, - - /* NICAM/FM -- I (6.0/6.552) */ - { { 2, 4, -6, -4, 40, 94 }, { 3, 18, 27, 48, 66, 72 }, - MSP_CARRIER(6.0), MSP_CARRIER(6.0), - 0x00d0, 0x0040, 0x0120, 0x3000}, - - /* NICAM/AM -- L (6.5/5.85) */ - { { -2, -8, -10, 10, 50, 86 }, { -4, -12, -9, 23, 79, 126 }, - MSP_CARRIER(6.5), MSP_CARRIER(6.5), - 0x00c6, 0x0140, 0x0120, 0x7c03}, + { /* AM (for carrier detect / msp3400) */ + {75, 19, 36, 35, 39, 40}, + {75, 19, 36, 35, 39, 40}, + MSP_CARRIER(5.5), MSP_CARRIER(5.5), + 0x00d0, 0x0500, 0x0020, 0x3000 + },{ /* AM (for carrier detect / msp3410) */ + {-1, -1, -8, 2, 59, 126}, + {-1, -1, -8, 2, 59, 126}, + MSP_CARRIER(5.5), MSP_CARRIER(5.5), + 0x00d0, 0x0100, 0x0020, 0x3000 + },{ /* FM Radio */ + {-8, -8, 4, 6, 78, 107}, + {-8, -8, 4, 6, 78, 107}, + MSP_CARRIER(10.7), MSP_CARRIER(10.7), + 0x00d0, 0x0480, 0x0020, 0x3000 + },{ /* Terrestial FM-mono + FM-stereo */ + {3, 18, 27, 48, 66, 72}, + {3, 18, 27, 48, 66, 72}, + MSP_CARRIER(5.5), MSP_CARRIER(5.5), + 0x00d0, 0x0480, 0x0030, 0x3000 + },{ /* Sat FM-mono */ + { 1, 9, 14, 24, 33, 37}, + { 3, 18, 27, 48, 66, 72}, + MSP_CARRIER(6.5), MSP_CARRIER(6.5), + 0x00c6, 0x0480, 0x0000, 0x3000 + },{ /* NICAM/FM -- B/G (5.5/5.85), D/K (6.5/5.85) */ + {-2, -8, -10, 10, 50, 86}, + {3, 18, 27, 48, 66, 72}, + MSP_CARRIER(5.5), MSP_CARRIER(5.5), + 0x00d0, 0x0040, 0x0120, 0x3000 + },{ /* NICAM/FM -- I (6.0/6.552) */ + {2, 4, -6, -4, 40, 94}, + {3, 18, 27, 48, 66, 72}, + MSP_CARRIER(6.0), MSP_CARRIER(6.0), + 0x00d0, 0x0040, 0x0120, 0x3000 + },{ /* NICAM/AM -- L (6.5/5.85) */ + {-2, -8, -10, 10, 50, 86}, + {-4, -12, -9, 23, 79, 126}, + MSP_CARRIER(6.5), MSP_CARRIER(6.5), + 0x00c6, 0x0140, 0x0120, 0x7c03 + }, }; struct CARRIER_DETECT { @@ -338,32 +389,68 @@ static struct CARRIER_DETECT carrier_detect_65[] = { #define CARRIER_COUNT(x) (sizeof(x)/sizeof(struct CARRIER_DETECT)) -/* ----------------------------------------------------------------------- */ +/* ----------------------------------------------------------------------- * + * bits 9 8 5 - SCART DSP input Select: + * 0 0 0 - SCART 1 to DSP input (reset position) + * 0 1 0 - MONO to DSP input + * 1 0 0 - SCART 2 to DSP input + * 1 1 1 - Mute DSP input + * + * bits 11 10 6 - SCART 1 Output Select: + * 0 0 0 - undefined (reset position) + * 0 1 0 - SCART 2 Input to SCART 1 Output (for devices with 2 SCARTS) + * 1 0 0 - MONO input to SCART 1 Output + * 1 1 0 - SCART 1 DA to SCART 1 Output + * 0 0 1 - SCART 2 DA to SCART 1 Output + * 0 1 1 - SCART 1 Input to SCART 1 Output + * 1 1 1 - Mute SCART 1 Output + * + * bits 13 12 7 - SCART 2 Output Select (for devices with 2 Output SCART): + * 0 0 0 - SCART 1 DA to SCART 2 Output (reset position) + * 0 1 0 - SCART 1 Input to SCART 2 Output + * 1 0 0 - MONO input to SCART 2 Output + * 0 0 1 - SCART 2 DA to SCART 2 Output + * 0 1 1 - SCART 2 Input to SCART 2 Output + * 1 1 0 - Mute SCART 2 Output + * + * Bits 4 to 0 should be zero. + * ----------------------------------------------------------------------- */ static int scarts[3][9] = { - /* MASK IN1 IN2 IN1_DA IN2_DA IN3 IN4 MONO MUTE */ - { 0x0320, 0x0000, 0x0200, -1, -1, 0x0300, 0x0020, 0x0100, 0x0320 }, - { 0x0c40, 0x0440, 0x0400, 0x0c00, 0x0040, 0x0000, 0x0840, 0x0800, 0x0c40 }, - { 0x3080, 0x1000, 0x1080, 0x0000, 0x0080, 0x2080, 0x3080, 0x2000, 0x3000 }, + /* MASK IN1 IN2 IN1_DA IN2_DA IN3 IN4 MONO MUTE */ + /* SCART DSP Input select */ + { 0x0320, 0x0000, 0x0200, -1, -1, 0x0300, 0x0020, 0x0100, 0x0320 }, + /* SCART1 Output select */ + { 0x0c40, 0x0440, 0x0400, 0x0c00, 0x0040, 0x0000, 0x0840, 0x0800, 0x0c40 }, + /* SCART2 Output select */ + { 0x3080, 0x1000, 0x1080, 0x0000, 0x0080, 0x2080, 0x3080, 0x2000, 0x3000 }, }; static char *scart_names[] = { - "mask", "in1", "in2", "in1 da", "in2 da", "in3", "in4", "mono", "mute" + "mask", "in1", "in2", "in1 da", "in2 da", "in3", "in4", "mono", "mute" }; -static void -msp3400c_set_scart(struct i2c_client *client, int in, int out) +static void msp3400c_set_scart(struct i2c_client *client, int in, int out) { struct msp3400c *msp = i2c_get_clientdata(client); - if (-1 == scarts[out][in]) - return; + msp->in_scart=in; + + if (in >= 1 && in <= 8 && out >= 0 && out <= 2) { + if (-1 == scarts[out][in]) + return; - dprintk(KERN_DEBUG - "msp34xx: scart switch: %s => %d\n",scart_names[in],out); - msp->acb &= ~scarts[out][SCART_MASK]; - msp->acb |= scarts[out][in]; - msp3400c_write(client,I2C_MSP3400C_DFP, 0x0013, msp->acb); + msp->acb &= ~scarts[out][SCART_MASK]; + msp->acb |= scarts[out][in]; + } else + msp->acb = 0xf60; /* Mute Input and SCART 1 Output */ + + msp3400_dbg("scart switch: %s => %d (ACB=0x%04x)\n", + scart_names[in], out, msp->acb); + msp3400c_write(client,I2C_MSP3400C_DFP, 0x13, msp->acb); + + /* Sets I2S speed 0 = 1.024 Mbps, 1 = 2.048 Mbps */ + msp3400c_write(client,I2C_MSP3400C_DEM, 0x40, msp->i2s_mode); } /* ------------------------------------------------------------------------ */ @@ -378,33 +465,34 @@ static void msp3400c_setcarrier(struct i2c_client *client, int cdo1, int cdo2) } static void msp3400c_setvolume(struct i2c_client *client, - int muted, int volume, int balance) -{ - int val = 0, bal = 0; + int muted, int left, int right) + { + int vol = 0, val = 0, balance = 0; if (!muted) { /* 0x7f instead if 0x73 here has sound quality issues, * probably due to overmodulation + clipping ... */ - val = (volume * 0x73 / 65535) << 8; + vol = (left > right) ? left : right; + val = (vol * 0x73 / 65535) << 8; } - if (val) { - bal = (balance / 256) - 128; + if (vol > 0) { + balance = ((right - left) * 127) / vol; } - dprintk(KERN_DEBUG - "msp34xx: setvolume: mute=%s %d:%d v=0x%02x b=0x%02x\n", - muted ? "on" : "off", volume, balance, val>>8, bal); + + msp3400_dbg("setvolume: mute=%s %d:%d v=0x%02x b=0x%02x\n", + muted ? "on" : "off", left, right, val >> 8, balance); msp3400c_write(client,I2C_MSP3400C_DFP, 0x0000, val); /* loudspeaker */ msp3400c_write(client,I2C_MSP3400C_DFP, 0x0006, val); /* headphones */ msp3400c_write(client,I2C_MSP3400C_DFP, 0x0007, - muted ? 0x01 : (val | 0x01)); - msp3400c_write(client,I2C_MSP3400C_DFP, 0x0001, bal << 8); + muted ? 0x1 : (val | 0x1)); + msp3400c_write(client, I2C_MSP3400C_DFP, 0x0001, balance << 8); } static void msp3400c_setbass(struct i2c_client *client, int bass) { int val = ((bass-32768) * 0x60 / 65535) << 8; - dprintk(KERN_DEBUG "msp34xx: setbass: %d 0x%02x\n",bass, val>>8); + msp3400_dbg("setbass: %d 0x%02x\n", bass, val >> 8); msp3400c_write(client,I2C_MSP3400C_DFP, 0x0002, val); /* loudspeaker */ } @@ -412,7 +500,7 @@ static void msp3400c_settreble(struct i2c_client *client, int treble) { int val = ((treble-32768) * 0x60 / 65535) << 8; - dprintk(KERN_DEBUG "msp34xx: settreble: %d 0x%02x\n",treble, val>>8); + msp3400_dbg("settreble: %d 0x%02x\n",treble, val>>8); msp3400c_write(client,I2C_MSP3400C_DFP, 0x0003, val); /* loudspeaker */ } @@ -421,7 +509,7 @@ static void msp3400c_setmode(struct i2c_client *client, int type) struct msp3400c *msp = i2c_get_clientdata(client); int i; - dprintk(KERN_DEBUG "msp3400: setmode: %d\n",type); + msp3400_dbg("setmode: %d\n",type); msp->mode = type; msp->audmode = V4L2_TUNER_MODE_MONO; msp->rxsubchans = V4L2_TUNER_SUB_MONO; @@ -474,7 +562,8 @@ static void msp3400c_setmode(struct i2c_client *client, int type) } } -static int best_audio_mode(int rxsubchans) +/* given a bitmask of VIDEO_SOUND_XXX returns the "best" in the bitmask */ +static int best_video_sound(int rxsubchans) { if (rxsubchans & V4L2_TUNER_SUB_STEREO) return V4L2_TUNER_MODE_STEREO; @@ -486,31 +575,31 @@ static int best_audio_mode(int rxsubchans) } /* turn on/off nicam + stereo */ -static void msp3400c_set_audmode(struct i2c_client *client, int audmode) +static void msp3400c_setstereo(struct i2c_client *client, int mode) { - static char *strmode[16] = { -#if __GNUC__ >= 3 - [ 0 ... 15 ] = "invalid", -#endif - [ V4L2_TUNER_MODE_MONO ] = "mono", - [ V4L2_TUNER_MODE_STEREO ] = "stereo", - [ V4L2_TUNER_MODE_LANG1 ] = "lang1", - [ V4L2_TUNER_MODE_LANG2 ] = "lang2", + static char *strmode[] = { "0", "mono", "stereo", "3", + "lang1", "5", "6", "7", "lang2" }; struct msp3400c *msp = i2c_get_clientdata(client); - int nicam=0; /* channel source: FM/AM or nicam */ - int src=0; + int nicam = 0; /* channel source: FM/AM or nicam */ + int src = 0; - BUG_ON(msp->opmode == OPMODE_SIMPLER); - msp->audmode = audmode; + if (IS_MSP34XX_G(msp)) { + /* this method would break everything, let's make sure + * it's never called + */ + msp3400_dbg + ("DEBUG WARNING setstereo called with mode=%d instead of set_source (ignored)\n", + mode); + return; + } /* switch demodulator */ switch (msp->mode) { case MSP_MODE_FM_TERRA: - dprintk(KERN_DEBUG "msp3400: FM setstereo: %s\n", - strmode[audmode]); + msp3400_dbg("FM setstereo: %s\n", strmode[mode]); msp3400c_setcarrier(client,msp->second,msp->main); - switch (audmode) { + switch (mode) { case V4L2_TUNER_MODE_STEREO: msp3400c_write(client,I2C_MSP3400C_DFP, 0x000e, 0x3001); break; @@ -522,9 +611,8 @@ static void msp3400c_set_audmode(struct i2c_client *client, int audmode) } break; case MSP_MODE_FM_SAT: - dprintk(KERN_DEBUG "msp3400: SAT setstereo: %s\n", - strmode[audmode]); - switch (audmode) { + msp3400_dbg("SAT setstereo: %s\n", strmode[mode]); + switch (mode) { case V4L2_TUNER_MODE_MONO: msp3400c_setcarrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5)); break; @@ -542,39 +630,35 @@ static void msp3400c_set_audmode(struct i2c_client *client, int audmode) case MSP_MODE_FM_NICAM1: case MSP_MODE_FM_NICAM2: case MSP_MODE_AM_NICAM: - dprintk(KERN_DEBUG "msp3400: NICAM setstereo: %s\n", - strmode[audmode]); + msp3400_dbg("NICAM setstereo: %s\n",strmode[mode]); msp3400c_setcarrier(client,msp->second,msp->main); if (msp->nicam_on) nicam=0x0100; break; case MSP_MODE_BTSC: - dprintk(KERN_DEBUG "msp3400: BTSC setstereo: %s\n", - strmode[audmode]); + msp3400_dbg("BTSC setstereo: %s\n",strmode[mode]); nicam=0x0300; break; case MSP_MODE_EXTERN: - dprintk(KERN_DEBUG "msp3400: extern setstereo: %s\n", - strmode[audmode]); + msp3400_dbg("extern setstereo: %s\n",strmode[mode]); nicam = 0x0200; break; case MSP_MODE_FM_RADIO: - dprintk(KERN_DEBUG "msp3400: FM-Radio setstereo: %s\n", - strmode[audmode]); + msp3400_dbg("FM-Radio setstereo: %s\n",strmode[mode]); break; default: - dprintk(KERN_DEBUG "msp3400: mono setstereo\n"); + msp3400_dbg("mono setstereo\n"); return; } /* switch audio */ - switch (audmode) { + switch (best_video_sound(mode)) { case V4L2_TUNER_MODE_STEREO: src = 0x0020 | nicam; break; case V4L2_TUNER_MODE_MONO: if (msp->mode == MSP_MODE_AM_NICAM) { - dprintk("msp3400: switching to AM mono\n"); + msp3400_dbg("switching to AM mono\n"); /* AM mono decoding is handled by tuner, not MSP chip */ /* SCART switching control register */ msp3400c_set_scart(client,SCART_MONO,0); @@ -588,8 +672,7 @@ static void msp3400c_set_audmode(struct i2c_client *client, int audmode) src = 0x0010 | nicam; break; } - dprintk(KERN_DEBUG - "msp3400: setstereo final source/matrix = 0x%x\n", src); + msp3400_dbg("setstereo final source/matrix = 0x%x\n", src); if (dolby) { msp3400c_write(client,I2C_MSP3400C_DFP, 0x0008,0x0520); @@ -605,29 +688,55 @@ static void msp3400c_set_audmode(struct i2c_client *client, int audmode) } static void -msp3400c_print_mode(struct msp3400c *msp) +msp3400c_print_mode(struct i2c_client *client) { + struct msp3400c *msp = i2c_get_clientdata(client); + if (msp->main == msp->second) { - printk(KERN_DEBUG "msp3400: mono sound carrier: %d.%03d MHz\n", + msp3400_dbg("mono sound carrier: %d.%03d MHz\n", msp->main/910000,(msp->main/910)%1000); } else { - printk(KERN_DEBUG "msp3400: main sound carrier: %d.%03d MHz\n", + msp3400_dbg("main sound carrier: %d.%03d MHz\n", msp->main/910000,(msp->main/910)%1000); } - if (msp->mode == MSP_MODE_FM_NICAM1 || - msp->mode == MSP_MODE_FM_NICAM2) - printk(KERN_DEBUG "msp3400: NICAM/FM carrier : %d.%03d MHz\n", + if (msp->mode == MSP_MODE_FM_NICAM1 || msp->mode == MSP_MODE_FM_NICAM2) + msp3400_dbg("NICAM/FM carrier : %d.%03d MHz\n", msp->second/910000,(msp->second/910)%1000); if (msp->mode == MSP_MODE_AM_NICAM) - printk(KERN_DEBUG "msp3400: NICAM/AM carrier : %d.%03d MHz\n", + msp3400_dbg("NICAM/AM carrier : %d.%03d MHz\n", msp->second/910000,(msp->second/910)%1000); if (msp->mode == MSP_MODE_FM_TERRA && msp->main != msp->second) { - printk(KERN_DEBUG "msp3400: FM-stereo carrier : %d.%03d MHz\n", + msp3400_dbg("FM-stereo carrier : %d.%03d MHz\n", msp->second/910000,(msp->second/910)%1000); } } +#define MSP3400_MAX 4 +static struct i2c_client *msps[MSP3400_MAX]; +static void msp3400c_restore_dfp(struct i2c_client *client) +{ + struct msp3400c *msp = i2c_get_clientdata(client); + int i; + + for (i = 0; i < DFP_COUNT; i++) { + if (-1 == msp->dfp_regs[i]) + continue; + msp3400c_write(client, I2C_MSP3400C_DFP, i, msp->dfp_regs[i]); + } +} + +/* if the dfp_regs is set, set what's in there. Otherwise, set the default value */ +static int msp3400c_write_dfp_with_default(struct i2c_client *client, + int addr, int default_value) +{ + struct msp3400c *msp = i2c_get_clientdata(client); + int value = default_value; + if (addr < DFP_COUNT && -1 != msp->dfp_regs[addr]) + value = msp->dfp_regs[addr]; + return msp3400c_write(client, I2C_MSP3400C_DFP, addr, value); +} + /* ----------------------------------------------------------------------- */ struct REGISTER_DUMP { @@ -635,8 +744,15 @@ struct REGISTER_DUMP { char *name; }; -static int -autodetect_stereo(struct i2c_client *client) +struct REGISTER_DUMP d1[] = { + {0x007e, "autodetect"}, + {0x0023, "C_AD_BITS "}, + {0x0038, "ADD_BITS "}, + {0x003e, "CIB_BITS "}, + {0x0057, "ERROR_RATE"}, +}; + +static int autodetect_stereo(struct i2c_client *client) { struct msp3400c *msp = i2c_get_clientdata(client); int val; @@ -649,8 +765,7 @@ autodetect_stereo(struct i2c_client *client) val = msp3400c_read(client, I2C_MSP3400C_DFP, 0x18); if (val > 32767) val -= 65536; - dprintk(KERN_DEBUG - "msp34xx: stereo detect register: %d\n",val); + msp3400_dbg("stereo detect register: %d\n",val); if (val > 4096) { rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO; } else if (val < -4096) { @@ -664,8 +779,7 @@ autodetect_stereo(struct i2c_client *client) case MSP_MODE_FM_NICAM2: case MSP_MODE_AM_NICAM: val = msp3400c_read(client, I2C_MSP3400C_DEM, 0x23); - dprintk(KERN_DEBUG - "msp34xx: nicam sync=%d, mode=%d\n", + msp3400_dbg("nicam sync=%d, mode=%d\n", val & 1, (val & 0x1e) >> 1); if (val & 1) { @@ -698,8 +812,7 @@ autodetect_stereo(struct i2c_client *client) break; case MSP_MODE_BTSC: val = msp3400c_read(client, I2C_MSP3400C_DEM, 0x200); - dprintk(KERN_DEBUG - "msp3410: status=0x%x (pri=%s, sec=%s, %s%s%s)\n", + msp3400_dbg("status=0x%x (pri=%s, sec=%s, %s%s%s)\n", val, (val & 0x0002) ? "no" : "yes", (val & 0x0004) ? "no" : "yes", @@ -713,13 +826,13 @@ autodetect_stereo(struct i2c_client *client) } if (rxsubchans != msp->rxsubchans) { update = 1; - dprintk(KERN_DEBUG "msp34xx: watch: rxsubchans %d => %d\n", + msp3400_dbg("watch: rxsubchans %d => %d\n", msp->rxsubchans,rxsubchans); msp->rxsubchans = rxsubchans; } if (newnicam != msp->nicam_on) { update = 1; - dprintk(KERN_DEBUG "msp34xx: watch: nicam %d => %d\n", + msp3400_dbg("watch: nicam %d => %d\n", msp->nicam_on,newnicam); msp->nicam_on = newnicam; } @@ -756,8 +869,15 @@ static void watch_stereo(struct i2c_client *client) { struct msp3400c *msp = i2c_get_clientdata(client); - if (autodetect_stereo(client)) - msp3400c_set_audmode(client,best_audio_mode(msp->rxsubchans)); + if (autodetect_stereo(client)) { + if (msp->stereo & V4L2_TUNER_MODE_STEREO) + msp3400c_setstereo(client, V4L2_TUNER_MODE_STEREO); + else if (msp->stereo & VIDEO_SOUND_LANG1) + msp3400c_setstereo(client, V4L2_TUNER_MODE_LANG1); + else + msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO); + } + if (once) msp->watch_stereo = 0; } @@ -769,14 +889,14 @@ static int msp3400c_thread(void *data) struct CARRIER_DETECT *cd; int count, max1,max2,val1,val2, val,this; - printk("msp3400: kthread started\n"); + msp3400_info("msp3400 daemon started\n"); for (;;) { - d2printk("msp3400: thread: sleep\n"); + msp3400_dbg_mediumvol("msp3400 thread: sleep\n"); msp34xx_sleep(msp,-1); - d2printk("msp3400: thread: wakeup\n"); + msp3400_dbg_mediumvol("msp3400 thread: wakeup\n"); restart: - dprintk("msp3410: thread: restart scan\n"); + msp3400_dbg("thread: restart scan\n"); msp->restart = 0; if (kthread_should_stop()) break; @@ -784,9 +904,8 @@ static int msp3400c_thread(void *data) if (VIDEO_MODE_RADIO == msp->norm || MSP_MODE_EXTERN == msp->mode) { /* no carrier scan, just unmute */ - printk("msp3400: thread: no carrier scan\n"); - msp3400c_setvolume(client, msp->muted, - msp->volume, msp->balance); + msp3400_info("thread: no carrier scan\n"); + msp3400c_setvolume(client, msp->muted, msp->left, msp->right); continue; } @@ -802,13 +921,14 @@ static int msp3400c_thread(void *data) goto restart; /* carrier detect pass #1 -- main carrier */ - cd = carrier_detect_main; count = CARRIER_COUNT(carrier_detect_main); + cd = carrier_detect_main; + count = CARRIER_COUNT(carrier_detect_main); if (amsound && (msp->norm == VIDEO_MODE_SECAM)) { /* autodetect doesn't work well with AM ... */ max1 = 3; count = 0; - dprintk("msp3400: AM sound override\n"); + msp3400_dbg("AM sound override\n"); } for (this = 0; this < count; this++) { @@ -820,7 +940,7 @@ static int msp3400c_thread(void *data) val -= 65536; if (val1 < val) val1 = val, max1 = this; - dprintk("msp3400: carrier1 val: %5d / %s\n", val,cd[this].name); + msp3400_dbg("carrier1 val: %5d / %s\n", val,cd[this].name); } /* carrier detect pass #2 -- second (stereo) carrier */ @@ -836,13 +956,16 @@ static int msp3400c_thread(void *data) case 0: /* 4.5 */ case 2: /* 6.0 */ default: - cd = NULL; count = 0; + cd = NULL; + count = 0; break; } if (amsound && (msp->norm == VIDEO_MODE_SECAM)) { /* autodetect doesn't work well with AM ... */ - cd = NULL; count = 0; max2 = 0; + cd = NULL; + count = 0; + max2 = 0; } for (this = 0; this < count; this++) { msp3400c_setcarrier(client, cd[this].cdo,cd[this].cdo); @@ -853,7 +976,7 @@ static int msp3400c_thread(void *data) val -= 65536; if (val2 < val) val2 = val, max2 = this; - dprintk("msp3400: carrier2 val: %5d / %s\n", val,cd[this].name); + msp3400_dbg("carrier2 val: %5d / %s\n", val,cd[this].name); } /* programm the msp3400 according to the results */ @@ -865,7 +988,7 @@ static int msp3400c_thread(void *data) msp->second = carrier_detect_55[max2].cdo; msp3400c_setmode(client, MSP_MODE_FM_TERRA); msp->nicam_on = 0; - msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO); + msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO); msp->watch_stereo = 1; } else if (max2 == 1 && HAVE_NICAM(msp)) { /* B/G NICAM */ @@ -892,7 +1015,7 @@ static int msp3400c_thread(void *data) msp->second = carrier_detect_65[max2].cdo; msp3400c_setmode(client, MSP_MODE_FM_TERRA); msp->nicam_on = 0; - msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO); + msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO); msp->watch_stereo = 1; } else if (max2 == 0 && msp->norm == VIDEO_MODE_SECAM) { @@ -900,7 +1023,7 @@ static int msp3400c_thread(void *data) msp->second = carrier_detect_65[max2].cdo; msp3400c_setmode(client, MSP_MODE_AM_NICAM); msp->nicam_on = 0; - msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO); + msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO); msp3400c_setcarrier(client, msp->second, msp->main); /* volume prescale for SCART (AM mono input) */ msp3400c_write(client,I2C_MSP3400C_DFP, 0x000d, 0x1900); @@ -924,15 +1047,16 @@ static int msp3400c_thread(void *data) msp->nicam_on = 0; msp3400c_setcarrier(client, msp->second, msp->main); msp->rxsubchans = V4L2_TUNER_SUB_MONO; - msp3400c_set_audmode(client, V4L2_TUNER_MODE_MONO); + msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO); break; } /* unmute */ - msp3400c_setvolume(client, msp->muted, - msp->volume, msp->balance); + msp3400c_setvolume(client, msp->muted, msp->left, msp->right); + msp3400c_restore_dfp(client); + if (debug) - msp3400c_print_mode(msp); + msp3400c_print_mode(client); /* monitor tv audio mode */ while (msp->watch_stereo) { @@ -941,7 +1065,7 @@ static int msp3400c_thread(void *data) watch_stereo(client); } } - dprintk(KERN_DEBUG "msp3400: thread: exit\n"); + msp3400_dbg("thread: exit\n"); return 0; } @@ -985,10 +1109,12 @@ static inline const char *msp34xx_standard_mode_name(int mode) return "unknown"; } -static int msp34xx_modus(int norm) +static int msp34xx_modus(struct i2c_client *client, int norm) { switch (norm) { case VIDEO_MODE_PAL: + msp3400_dbg("video mode selected to PAL\n"); + #if 1 /* experimental: not sure this works with all chip versions */ return 0x7003; @@ -997,12 +1123,16 @@ static int msp34xx_modus(int norm) return 0x1003; #endif case VIDEO_MODE_NTSC: /* BTSC */ + msp3400_dbg("video mode selected to NTSC\n"); return 0x2003; case VIDEO_MODE_SECAM: + msp3400_dbg("video mode selected to SECAM\n"); return 0x0003; case VIDEO_MODE_RADIO: + msp3400_dbg("video mode selected to Radio\n"); return 0x0003; case VIDEO_MODE_AUTO: + msp3400_dbg("video mode selected to Auto\n"); return 0x2003; default: return 0x0003; @@ -1031,23 +1161,22 @@ static int msp3410d_thread(void *data) struct msp3400c *msp = i2c_get_clientdata(client); int mode,val,i,std; - printk("msp3410: daemon started\n"); + msp3400_info("msp3410 daemon started\n"); for (;;) { - d2printk(KERN_DEBUG "msp3410: thread: sleep\n"); + msp3400_dbg_mediumvol("msp3410 thread: sleep\n"); msp34xx_sleep(msp,-1); - d2printk(KERN_DEBUG "msp3410: thread: wakeup\n"); + msp3400_dbg_mediumvol("msp3410 thread: wakeup\n"); restart: - dprintk("msp3410: thread: restart scan\n"); + msp3400_dbg("thread: restart scan\n"); msp->restart = 0; if (kthread_should_stop()) break; if (msp->mode == MSP_MODE_EXTERN) { /* no carrier scan needed, just unmute */ - dprintk(KERN_DEBUG "msp3410: thread: no carrier scan\n"); - msp3400c_setvolume(client, msp->muted, - msp->volume, msp->balance); + msp3400_dbg("thread: no carrier scan\n"); + msp3400c_setvolume(client, msp->muted, msp->left, msp->right); continue; } @@ -1059,14 +1188,14 @@ static int msp3410d_thread(void *data) goto restart; /* start autodetect */ - mode = msp34xx_modus(msp->norm); + mode = msp34xx_modus(client, msp->norm); std = msp34xx_standard(msp->norm); msp3400c_write(client, I2C_MSP3400C_DEM, 0x30, mode); msp3400c_write(client, I2C_MSP3400C_DEM, 0x20, std); msp->watch_stereo = 0; if (debug) - printk(KERN_DEBUG "msp3410: setting mode: %s (0x%04x)\n", + msp3400_dbg("setting mode: %s (0x%04x)\n", msp34xx_standard_mode_name(std) ,std); if (std != 1) { @@ -1082,13 +1211,13 @@ static int msp3410d_thread(void *data) val = msp3400c_read(client, I2C_MSP3400C_DEM, 0x7e); if (val < 0x07ff) break; - dprintk(KERN_DEBUG "msp3410: detection still in progress\n"); + msp3400_dbg("detection still in progress\n"); } } for (i = 0; modelist[i].name != NULL; i++) if (modelist[i].retval == val) break; - dprintk(KERN_DEBUG "msp3410: current mode: %s (0x%04x)\n", + msp3400_dbg("current mode: %s (0x%04x)\n", modelist[i].name ? modelist[i].name : "unknown", val); msp->main = modelist[i].main; @@ -1096,7 +1225,7 @@ static int msp3410d_thread(void *data) if (amsound && (msp->norm == VIDEO_MODE_SECAM) && (val != 0x0009)) { /* autodetection has failed, let backup */ - dprintk(KERN_DEBUG "msp3410: autodetection failed," + msp3400_dbg("autodetection failed," " switching to backup mode: %s (0x%04x)\n", modelist[8].name ? modelist[8].name : "unknown",val); val = 0x0009; @@ -1120,13 +1249,13 @@ static int msp3410d_thread(void *data) msp->rxsubchans = V4L2_TUNER_SUB_STEREO; msp->nicam_on = 1; msp->watch_stereo = 1; - msp3400c_set_audmode(client,V4L2_TUNER_MODE_STEREO); + msp3400c_setstereo(client,V4L2_TUNER_MODE_STEREO); break; case 0x0009: msp->mode = MSP_MODE_AM_NICAM; msp->rxsubchans = V4L2_TUNER_SUB_MONO; msp->nicam_on = 1; - msp3400c_set_audmode(client,V4L2_TUNER_MODE_MONO); + msp3400c_setstereo(client,V4L2_TUNER_MODE_MONO); msp->watch_stereo = 1; break; case 0x0020: /* BTSC */ @@ -1135,7 +1264,7 @@ static int msp3410d_thread(void *data) msp->rxsubchans = V4L2_TUNER_SUB_STEREO; msp->nicam_on = 0; msp->watch_stereo = 1; - msp3400c_set_audmode(client,V4L2_TUNER_MODE_STEREO); + msp3400c_setstereo(client,V4L2_TUNER_MODE_STEREO); break; case 0x0040: /* FM radio */ msp->mode = MSP_MODE_FM_RADIO; @@ -1169,9 +1298,10 @@ static int msp3410d_thread(void *data) /* unmute, restore misc registers */ msp3400c_setbass(client, msp->bass); msp3400c_settreble(client, msp->treble); - msp3400c_setvolume(client, msp->muted, - msp->volume, msp->balance); - msp3400c_write(client, I2C_MSP3400C_DFP, 0x0013, msp->acb); + msp3400c_setvolume(client, msp->muted, msp->left, msp->right); + msp3400c_write(client, I2C_MSP3400C_DFP, 0x13, msp->acb); + msp3400c_write(client,I2C_MSP3400C_DEM, 0x40, msp->i2s_mode); + msp3400c_restore_dfp(client); /* monitor tv audio mode */ while (msp->watch_stereo) { @@ -1180,7 +1310,7 @@ static int msp3410d_thread(void *data) watch_stereo(client); } } - dprintk(KERN_DEBUG "msp3410: thread: exit\n"); + msp3400_dbg("thread: exit\n"); return 0; } @@ -1195,7 +1325,7 @@ static void msp34xxg_set_source(struct i2c_client *client, int source); /* (re-)initialize the msp34xxg, according to the current norm in msp->norm * return 0 if it worked, -1 if it failed */ -static int msp34xxg_init(struct i2c_client *client) +static int msp34xxg_reset(struct i2c_client *client) { struct msp3400c *msp = i2c_get_clientdata(client); int modus,std; @@ -1210,8 +1340,10 @@ static int msp34xxg_init(struct i2c_client *client) 0x0f20 /* mute DSP input, mute SCART 1 */)) return -1; + msp3400c_write(client,I2C_MSP3400C_DEM, 0x40, msp->i2s_mode); + /* step-by-step initialisation, as described in the manual */ - modus = msp34xx_modus(msp->norm); + modus = msp34xx_modus(client, msp->norm); std = msp34xx_standard(msp->norm); modus &= ~0x03; /* STATUS_CHANGE=0 */ modus |= 0x01; /* AUTOMATIC_SOUND_DETECTION=1 */ @@ -1222,7 +1354,7 @@ static int msp34xxg_init(struct i2c_client *client) return -1; if (msp3400c_write(client, I2C_MSP3400C_DEM, - 0x20/*stanard*/, + 0x20/*standard*/, std)) return -1; @@ -1230,21 +1362,18 @@ static int msp34xxg_init(struct i2c_client *client) standard/audio autodetection right now */ msp34xxg_set_source(client, msp->source); - if (msp3400c_write(client, I2C_MSP3400C_DFP, - 0x0e, /* AM/FM Prescale */ - 0x3000 /* default: [15:8] 75khz deviation */)) + if (msp3400c_write_dfp_with_default(client, 0x0e, /* AM/FM Prescale */ + 0x3000 + /* default: [15:8] 75khz deviation */ + )) return -1; - if (msp3400c_write(client, I2C_MSP3400C_DFP, - 0x10, /* NICAM Prescale */ - 0x5a00 /* default: 9db gain (as recommended) */)) + if (msp3400c_write_dfp_with_default(client, 0x10, /* NICAM Prescale */ + 0x5a00 + /* default: 9db gain (as recommended) */ + )) return -1; - if (msp3400c_write(client, - I2C_MSP3400C_DEM, - 0x20, /* STANDARD SELECT */ - standard /* default: 0x01 for automatic standard select*/)) - return -1; return 0; } @@ -1254,27 +1383,27 @@ static int msp34xxg_thread(void *data) struct msp3400c *msp = i2c_get_clientdata(client); int val, std, i; - printk("msp34xxg: daemon started\n"); + msp3400_info("msp34xxg daemon started\n"); msp->source = 1; /* default */ for (;;) { - d2printk(KERN_DEBUG "msp34xxg: thread: sleep\n"); + msp3400_dbg_mediumvol("msp34xxg thread: sleep\n"); msp34xx_sleep(msp,-1); - d2printk(KERN_DEBUG "msp34xxg: thread: wakeup\n"); + msp3400_dbg_mediumvol("msp34xxg thread: wakeup\n"); restart: - dprintk("msp34xxg: thread: restart scan\n"); + msp3400_dbg("thread: restart scan\n"); msp->restart = 0; if (kthread_should_stop()) break; /* setup the chip*/ - msp34xxg_init(client); + msp34xxg_reset(client); std = standard; if (std != 0x01) goto unmute; /* watch autodetect */ - dprintk("msp34xxg: triggered autodetect, waiting for result\n"); + msp3400_dbg("triggered autodetect, waiting for result\n"); for (i = 0; i < 10; i++) { if (msp34xx_sleep(msp,100)) goto restart; @@ -1285,23 +1414,23 @@ static int msp34xxg_thread(void *data) std = val; break; } - dprintk("msp34xxg: detection still in progress\n"); + msp3400_dbg("detection still in progress\n"); } if (0x01 == std) { - dprintk("msp34xxg: detection still in progress after 10 tries. giving up.\n"); + msp3400_dbg("detection still in progress after 10 tries. giving up.\n"); continue; } unmute: - dprintk("msp34xxg: current mode: %s (0x%04x)\n", + msp3400_dbg("current mode: %s (0x%04x)\n", msp34xx_standard_mode_name(std), std); /* unmute: dispatch sound to scart output, set scart volume */ - dprintk("msp34xxg: unmute\n"); + msp3400_dbg("unmute\n"); msp3400c_setbass(client, msp->bass); msp3400c_settreble(client, msp->treble); - msp3400c_setvolume(client, msp->muted, msp->volume, msp->balance); + msp3400c_setvolume(client, msp->muted, msp->left, msp->right); /* restore ACB */ if (msp3400c_write(client, @@ -1309,8 +1438,10 @@ static int msp34xxg_thread(void *data) 0x13, /* ACB */ msp->acb)) return -1; + + msp3400c_write(client,I2C_MSP3400C_DEM, 0x40, msp->i2s_mode); } - dprintk(KERN_DEBUG "msp34xxg: thread: exit\n"); + msp3400_dbg("thread: exit\n"); return 0; } @@ -1329,7 +1460,7 @@ static void msp34xxg_set_source(struct i2c_client *client, int source) * for MONO (source==0) downmixing set bit[7:0] to 0x30 */ int value = (source&0x07)<<8|(source==0 ? 0x30:0x20); - dprintk("msp34xxg: set source to %d (0x%x)\n", source, value); + msp3400_dbg("set source to %d (0x%x)\n", source, value); msp3400c_write(client, I2C_MSP3400C_DFP, 0x08, /* Loudspeaker Output */ @@ -1380,7 +1511,7 @@ static void msp34xxg_detect_stereo(struct i2c_client *client) * this is a problem, I'll handle SAP just like lang1/lang2. */ } - dprintk("msp34xxg: status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n", + msp3400_dbg("status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n", status, is_stereo, is_bilingual, msp->rxsubchans); } @@ -1427,7 +1558,7 @@ static void msp_wake_thread(struct i2c_client *client); static struct i2c_driver driver = { .owner = THIS_MODULE, - .name = "i2c msp3400 driver", + .name = "msp3400", .id = I2C_DRIVERID_MSP3400, .flags = I2C_DF_NOTIFY, .attach_adapter = msp_probe, @@ -1449,57 +1580,64 @@ static struct i2c_client client_template = static int msp_attach(struct i2c_adapter *adap, int addr, int kind) { struct msp3400c *msp; - struct i2c_client *c; + struct i2c_client *client = &client_template; int (*thread_func)(void *data) = NULL; + int i; - client_template.adapter = adap; - client_template.addr = addr; + client_template.adapter = adap; + client_template.addr = addr; - if (-1 == msp3400c_reset(&client_template)) { - dprintk("msp34xx: no chip found\n"); - return -1; - } + if (-1 == msp3400c_reset(&client_template)) { + msp3400_dbg("no chip found\n"); + return -1; + } - if (NULL == (c = kmalloc(sizeof(struct i2c_client),GFP_KERNEL))) - return -ENOMEM; - memcpy(c,&client_template,sizeof(struct i2c_client)); + if (NULL == (client = kmalloc(sizeof(struct i2c_client),GFP_KERNEL))) + return -ENOMEM; + memcpy(client,&client_template,sizeof(struct i2c_client)); if (NULL == (msp = kmalloc(sizeof(struct msp3400c),GFP_KERNEL))) { - kfree(c); + kfree(client); return -ENOMEM; } memset(msp,0,sizeof(struct msp3400c)); - msp->volume = 58880; /* 0db gain */ - msp->balance = 32768; - msp->bass = 32768; - msp->treble = 32768; - msp->input = -1; - msp->muted = 1; - - i2c_set_clientdata(c, msp); + msp->norm = VIDEO_MODE_NTSC; + msp->left = 58880; /* 0db gain */ + msp->right = 58880; /* 0db gain */ + msp->bass = 32768; + msp->treble = 32768; + msp->input = -1; + msp->muted = 0; + msp->i2s_mode = 0; + for (i = 0; i < DFP_COUNT; i++) + msp->dfp_regs[i] = -1; + + i2c_set_clientdata(client, msp); init_waitqueue_head(&msp->wq); - if (-1 == msp3400c_reset(c)) { + if (-1 == msp3400c_reset(client)) { kfree(msp); - kfree(c); - dprintk("msp34xx: no chip found\n"); + kfree(client); + msp3400_dbg("no chip found\n"); return -1; } - msp->rev1 = msp3400c_read(c, I2C_MSP3400C_DFP, 0x1e); + msp->rev1 = msp3400c_read(client, I2C_MSP3400C_DFP, 0x1e); if (-1 != msp->rev1) - msp->rev2 = msp3400c_read(c, I2C_MSP3400C_DFP, 0x1f); + msp->rev2 = msp3400c_read(client, I2C_MSP3400C_DFP, 0x1f); if ((-1 == msp->rev1) || (0 == msp->rev1 && 0 == msp->rev2)) { kfree(msp); - kfree(c); - dprintk("msp34xx: error while reading chip version\n"); + kfree(client); + msp3400_dbg("error while reading chip version\n"); return -1; } + msp3400_dbg("rev1=0x%04x, rev2=0x%04x\n", msp->rev1, msp->rev2); - msp3400c_setvolume(c, msp->muted, msp->volume, msp->balance); + msp3400c_setvolume(client, msp->muted, msp->left, msp->right); - snprintf(c->name, sizeof(c->name), "MSP34%02d%c-%c%d", - (msp->rev2>>8)&0xff, (msp->rev1&0xff)+'@', + snprintf(client->name, sizeof(client->name), "MSP%c4%02d%c-%c%d", + ((msp->rev1>>4)&0x0f) + '3', + (msp->rev2>>8)&0xff, (msp->rev1&0x0f)+'@', ((msp->rev1>>8)&0xff)+'@', msp->rev2&0x1f); msp->opmode = opmode; @@ -1513,7 +1651,7 @@ static int msp_attach(struct i2c_adapter *adap, int addr, int kind) } /* hello world :-) */ - printk(KERN_INFO "msp34xx: init: chip=%s", c->name); + msp3400_info("chip=%s", client->name); if (HAVE_NICAM(msp)) printk(" +nicam"); if (HAVE_SIMPLE(msp)) @@ -1542,29 +1680,49 @@ static int msp_attach(struct i2c_adapter *adap, int addr, int kind) /* startup control thread if needed */ if (thread_func) { - msp->kthread = kthread_run(thread_func, c, "msp34xx"); + msp->kthread = kthread_run(thread_func, client, "msp34xx"); + if (NULL == msp->kthread) - printk(KERN_WARNING "msp34xx: kernel_thread() failed\n"); - msp_wake_thread(c); + msp3400_warn("kernel_thread() failed\n"); + msp_wake_thread(client); } /* done */ - i2c_attach_client(c); + i2c_attach_client(client); + + /* update our own array */ + for (i = 0; i < MSP3400_MAX; i++) { + if (NULL == msps[i]) { + msps[i] = client; + break; + } + } + return 0; } static int msp_detach(struct i2c_client *client) { struct msp3400c *msp = i2c_get_clientdata(client); + int i; /* shutdown control thread */ - if (msp->kthread >= 0) { + if (msp->kthread) { msp->restart = 1; kthread_stop(msp->kthread); } - msp3400c_reset(client); + msp3400c_reset(client); + + /* update our own array */ + for (i = 0; i < MSP3400_MAX; i++) { + if (client == msps[i]) { + msps[i] = NULL; + break; + } + } i2c_detach_client(client); + kfree(msp); kfree(client); return 0; @@ -1640,7 +1798,7 @@ static void msp_any_set_audmode(struct i2c_client *client, int audmode) case OPMODE_MANUAL: case OPMODE_SIMPLE: msp->watch_stereo = 0; - msp3400c_set_audmode(client, audmode); + msp3400c_setstereo(client, audmode); break; case OPMODE_SIMPLER: msp34xxg_set_audmode(client, audmode); @@ -1648,16 +1806,18 @@ static void msp_any_set_audmode(struct i2c_client *client, int audmode) } } + static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct msp3400c *msp = i2c_get_clientdata(client); - __u16 *sarg = arg; + __u16 *sarg = arg; int scart = 0; switch (cmd) { case AUDC_SET_INPUT: - dprintk(KERN_DEBUG "msp34xx: AUDC_SET_INPUT(%d)\n",*sarg); + msp3400_dbg("AUDC_SET_INPUT(%d)\n",*sarg); + if (*sarg == msp->input) break; msp->input = *sarg; @@ -1691,15 +1851,15 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) msp3400c_set_scart(client,scart,0); msp3400c_write(client,I2C_MSP3400C_DFP,0x000d,0x1900); if (msp->opmode != OPMODE_SIMPLER) - msp3400c_set_audmode(client, msp->audmode); + msp3400c_setstereo(client, msp->audmode); } msp_wake_thread(client); break; case AUDC_SET_RADIO: - dprintk(KERN_DEBUG "msp34xx: AUDC_SET_RADIO\n"); + msp3400_dbg("AUDC_SET_RADIO\n"); msp->norm = VIDEO_MODE_RADIO; - dprintk(KERN_DEBUG "msp34xx: switching to radio mode\n"); + msp3400_dbg("switching to radio mode\n"); msp->watch_stereo = 0; switch (msp->opmode) { case OPMODE_MANUAL: @@ -1707,8 +1867,7 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) msp3400c_setmode(client,MSP_MODE_FM_RADIO); msp3400c_setcarrier(client, MSP_CARRIER(10.7), MSP_CARRIER(10.7)); - msp3400c_setvolume(client, msp->muted, - msp->volume, msp->balance); + msp3400c_setvolume(client, msp->muted, msp->left, msp->right); break; case OPMODE_SIMPLE: case OPMODE_SIMPLER: @@ -1717,6 +1876,30 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) break; } break; + /* work-in-progress: hook to control the DFP registers */ + case MSP_SET_DFPREG: + { + struct msp_dfpreg *r = arg; + int i; + + if (r->reg < 0 || r->reg >= DFP_COUNT) + return -EINVAL; + for (i = 0; i < sizeof(bl_dfp) / sizeof(int); i++) + if (r->reg == bl_dfp[i]) + return -EINVAL; + msp->dfp_regs[r->reg] = r->value; + msp3400c_write(client, I2C_MSP3400C_DFP, r->reg, r->value); + return 0; + } + case MSP_GET_DFPREG: + { + struct msp_dfpreg *r = arg; + + if (r->reg < 0 || r->reg >= DFP_COUNT) + return -EINVAL; + r->value = msp3400c_read(client, I2C_MSP3400C_DFP, r->reg); + return 0; + } /* --- v4l ioctls --- */ /* take care: bttv does userspace copying, we'll get a @@ -1725,7 +1908,7 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct video_audio *va = arg; - dprintk(KERN_DEBUG "msp34xx: VIDIOCGAUDIO\n"); + msp3400_dbg("VIDIOCGAUDIO\n"); va->flags |= VIDEO_AUDIO_VOLUME | VIDEO_AUDIO_BASS | VIDEO_AUDIO_TREBLE | @@ -1733,8 +1916,15 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) if (msp->muted) va->flags |= VIDEO_AUDIO_MUTE; - va->volume = msp->volume; - va->balance = (va->volume) ? msp->balance : 32768; + if (msp->muted) + va->flags |= VIDEO_AUDIO_MUTE; + va->volume = MAX(msp->left, msp->right); + va->balance = (32768 * MIN(msp->left, msp->right)) / + (va->volume ? va->volume : 1); + va->balance = (msp->left < msp->right) ? + (65535 - va->balance) : va->balance; + if (0 == va->volume) + va->balance = 32768; va->bass = msp->bass; va->treble = msp->treble; @@ -1746,27 +1936,43 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct video_audio *va = arg; - dprintk(KERN_DEBUG "msp34xx: VIDIOCSAUDIO\n"); + msp3400_dbg("VIDIOCSAUDIO\n"); msp->muted = (va->flags & VIDEO_AUDIO_MUTE); - msp->volume = va->volume; - msp->balance = va->balance; + msp->left = (MIN(65536 - va->balance, 32768) * + va->volume) / 32768; + msp->right = (MIN(va->balance, 32768) * va->volume) / 32768; msp->bass = va->bass; msp->treble = va->treble; - - msp3400c_setvolume(client, msp->muted, - msp->volume, msp->balance); - msp3400c_setbass(client,msp->bass); - msp3400c_settreble(client,msp->treble); + msp3400_dbg("VIDIOCSAUDIO setting va->volume to %d\n", + va->volume); + msp3400_dbg("VIDIOCSAUDIO setting va->balance to %d\n", + va->balance); + msp3400_dbg("VIDIOCSAUDIO setting va->flags to %d\n", + va->flags); + msp3400_dbg("VIDIOCSAUDIO setting msp->left to %d\n", + msp->left); + msp3400_dbg("VIDIOCSAUDIO setting msp->right to %d\n", + msp->right); + msp3400_dbg("VIDIOCSAUDIO setting msp->bass to %d\n", + msp->bass); + msp3400_dbg("VIDIOCSAUDIO setting msp->treble to %d\n", + msp->treble); + msp3400_dbg("VIDIOCSAUDIO setting msp->mode to %d\n", + msp->mode); + msp3400c_setvolume(client, msp->muted, msp->left, msp->right); + msp3400c_setbass(client, msp->bass); + msp3400c_settreble(client, msp->treble); if (va->mode != 0 && msp->norm != VIDEO_MODE_RADIO) msp_any_set_audmode(client,mode_v4l1_to_v4l2(va->mode)); break; } + case VIDIOCSCHAN: { struct video_channel *vc = arg; - dprintk(KERN_DEBUG "msp34xx: VIDIOCSCHAN (norm=%d)\n",vc->norm); + msp3400_dbg("VIDIOCSCHAN (norm=%d)\n",vc->norm); msp->norm = vc->norm; msp_wake_thread(client); break; @@ -1776,12 +1982,135 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) case VIDIOC_S_FREQUENCY: { /* new channel -- kick audio carrier scan */ - dprintk(KERN_DEBUG "msp34xx: VIDIOCSFREQ\n"); + msp3400_dbg("VIDIOCSFREQ\n"); msp_wake_thread(client); break; } + /* msp34xx specific */ + case MSP_SET_MATRIX: + { + struct msp_matrix *mspm = arg; + + msp3400_dbg("MSP_SET_MATRIX\n"); + msp3400c_set_scart(client, mspm->input, mspm->output); + break; + } + /* --- v4l2 ioctls --- */ + case VIDIOC_S_STD: + { + v4l2_std_id *id = arg; + + /*FIXME: use V4L2 mode flags on msp3400 instead of V4L1*/ + if (*id & V4L2_STD_PAL) { + msp->norm=VIDEO_MODE_PAL; + } else if (*id & V4L2_STD_SECAM) { + msp->norm=VIDEO_MODE_SECAM; + } else { + msp->norm=VIDEO_MODE_NTSC; + } + + msp_wake_thread(client); + return 0; + } + + case VIDIOC_ENUMINPUT: + { + struct v4l2_input *i = arg; + + if (i->index != 0) + return -EINVAL; + + i->type = V4L2_INPUT_TYPE_TUNER; + switch (i->index) { + case AUDIO_RADIO: + strcpy(i->name,"Radio"); + break; + case AUDIO_EXTERN_1: + strcpy(i->name,"Extern 1"); + break; + case AUDIO_EXTERN_2: + strcpy(i->name,"Extern 2"); + break; + case AUDIO_TUNER: + strcpy(i->name,"Television"); + break; + default: + return -EINVAL; + } + return 0; + } + + case VIDIOC_G_AUDIO: + { + struct v4l2_audio *a = arg; + + memset(a,0,sizeof(*a)); + + switch (a->index) { + case AUDIO_RADIO: + strcpy(a->name,"Radio"); + break; + case AUDIO_EXTERN_1: + strcpy(a->name,"Extern 1"); + break; + case AUDIO_EXTERN_2: + strcpy(a->name,"Extern 2"); + break; + case AUDIO_TUNER: + strcpy(a->name,"Television"); + break; + default: + return -EINVAL; + } + + msp_any_detect_stereo(client); + if (msp->audmode == V4L2_TUNER_MODE_STEREO) { + a->capability=V4L2_AUDCAP_STEREO; + } + + break; + } + case VIDIOC_S_AUDIO: + { + struct v4l2_audio *sarg = arg; + + switch (sarg->index) { + case AUDIO_RADIO: + /* Hauppauge uses IN2 for the radio */ + msp->mode = MSP_MODE_FM_RADIO; + scart = SCART_IN2; + break; + case AUDIO_EXTERN_1: + /* IN1 is often used for external input ... */ + msp->mode = MSP_MODE_EXTERN; + scart = SCART_IN1; + break; + case AUDIO_EXTERN_2: + /* ... sometimes it is IN2 through ;) */ + msp->mode = MSP_MODE_EXTERN; + scart = SCART_IN2; + break; + case AUDIO_TUNER: + msp->mode = -1; + break; + } + if (scart) { + msp->rxsubchans = V4L2_TUNER_SUB_STEREO; + msp->audmode = V4L2_TUNER_MODE_STEREO; + msp3400c_set_scart(client,scart,0); + msp3400c_write(client,I2C_MSP3400C_DFP,0x000d,0x1900); + } + if (sarg->capability==V4L2_AUDCAP_STEREO) { + msp->audmode = V4L2_TUNER_MODE_STEREO; + } else { + msp->audmode &= ~V4L2_TUNER_MODE_STEREO; + } + msp_any_set_audmode(client, msp->audmode); + msp_wake_thread(client); + break; + } case VIDIOC_G_TUNER: { struct v4l2_tuner *vt = arg; @@ -1804,13 +2133,46 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) break; } - /* msp34xx specific */ - case MSP_SET_MATRIX: + case VIDIOC_G_AUDOUT: { - struct msp_matrix *mspm = arg; + struct v4l2_audioout *a=(struct v4l2_audioout *)arg; + int idx=a->index; + + memset(a,0,sizeof(*a)); + + switch (idx) { + case 0: + strcpy(a->name,"Scart1 Out"); + break; + case 1: + strcpy(a->name,"Scart2 Out"); + break; + case 2: + strcpy(a->name,"I2S Out"); + break; + default: + return -EINVAL; + } + break; + + } + case VIDIOC_S_AUDOUT: + { + struct v4l2_audioout *a=(struct v4l2_audioout *)arg; + + if (a->index<0||a->index>2) + return -EINVAL; + + if (a->index==2) { + if (a->mode == V4L2_AUDMODE_32BITS) + msp->i2s_mode=1; + else + msp->i2s_mode=0; + } + msp3400_dbg("Setting audio out on msp34xx to input %i, mode %i\n", + a->index,msp->i2s_mode); + msp3400c_set_scart(client,msp->in_scart,a->index+1); - dprintk(KERN_DEBUG "msp34xx: MSP_SET_MATRIX\n"); - msp3400c_set_scart(client, mspm->input, mspm->output); break; } @@ -1823,19 +2185,19 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) static int msp_suspend(struct device * dev, pm_message_t state) { - struct i2c_client *c = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = container_of(dev, struct i2c_client, dev); - dprintk("msp34xx: suspend\n"); - msp3400c_reset(c); + msp3400_dbg("msp34xx: suspend\n"); + msp3400c_reset(client); return 0; } static int msp_resume(struct device * dev) { - struct i2c_client *c = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = container_of(dev, struct i2c_client, dev); - dprintk("msp34xx: resume\n"); - msp_wake_thread(c); + msp3400_dbg("msp34xx: resume\n"); + msp_wake_thread(client); return 0; } diff --git a/drivers/media/video/mt20xx.c b/drivers/media/video/mt20xx.c index 972aa5e0aeef..2180018f06de 100644 --- a/drivers/media/video/mt20xx.c +++ b/drivers/media/video/mt20xx.c @@ -76,17 +76,17 @@ static int mt2032_compute_freq(struct i2c_client *c, unsigned int xogc) //all in Hz { struct tuner *t = i2c_get_clientdata(c); - unsigned int fref,lo1,lo1n,lo1a,s,sel,lo1freq, desired_lo1, + unsigned int fref,lo1,lo1n,lo1a,s,sel,lo1freq, desired_lo1, desired_lo2,lo2,lo2n,lo2a,lo2num,lo2freq; - fref= 5250 *1000; //5.25MHz + fref= 5250 *1000; //5.25MHz desired_lo1=rfin+if1; lo1=(2*(desired_lo1/1000)+(fref/1000)) / (2*fref/1000); - lo1n=lo1/8; - lo1a=lo1-(lo1n*8); + lo1n=lo1/8; + lo1a=lo1-(lo1n*8); - s=rfin/1000/1000+1090; + s=rfin/1000/1000+1090; if(optimize_vco) { if(s>1890) sel=0; @@ -96,34 +96,34 @@ static int mt2032_compute_freq(struct i2c_client *c, else sel=4; // >1090 } else { - if(s>1790) sel=0; // <1958 - else if(s>1617) sel=1; - else if(s>1449) sel=2; - else if(s>1291) sel=3; - else sel=4; // >1090 + if(s>1790) sel=0; // <1958 + else if(s>1617) sel=1; + else if(s>1449) sel=2; + else if(s>1291) sel=3; + else sel=4; // >1090 } *ret_sel=sel; - lo1freq=(lo1a+8*lo1n)*fref; + lo1freq=(lo1a+8*lo1n)*fref; tuner_dbg("mt2032: rfin=%d lo1=%d lo1n=%d lo1a=%d sel=%d, lo1freq=%d\n", rfin,lo1,lo1n,lo1a,sel,lo1freq); - desired_lo2=lo1freq-rfin-if2; - lo2=(desired_lo2)/fref; - lo2n=lo2/8; - lo2a=lo2-(lo2n*8); - lo2num=((desired_lo2/1000)%(fref/1000))* 3780/(fref/1000); //scale to fit in 32bit arith - lo2freq=(lo2a+8*lo2n)*fref + lo2num*(fref/1000)/3780*1000; + desired_lo2=lo1freq-rfin-if2; + lo2=(desired_lo2)/fref; + lo2n=lo2/8; + lo2a=lo2-(lo2n*8); + lo2num=((desired_lo2/1000)%(fref/1000))* 3780/(fref/1000); //scale to fit in 32bit arith + lo2freq=(lo2a+8*lo2n)*fref + lo2num*(fref/1000)/3780*1000; tuner_dbg("mt2032: rfin=%d lo2=%d lo2n=%d lo2a=%d num=%d lo2freq=%d\n", rfin,lo2,lo2n,lo2a,lo2num,lo2freq); - if(lo1a<0 || lo1a>7 || lo1n<17 ||lo1n>48 || lo2a<0 ||lo2a >7 ||lo2n<17 || lo2n>30) { + if(lo1a<0 || lo1a>7 || lo1n<17 ||lo1n>48 || lo2a<0 ||lo2a >7 ||lo2n<17 || lo2n>30) { tuner_info("mt2032: frequency parameters out of range: %d %d %d %d\n", lo1a, lo1n, lo2a,lo2n); - return(-1); - } + return(-1); + } mt2032_spurcheck(c, lo1freq, desired_lo2, spectrum_from, spectrum_to); // should recalculate lo1 (one step up/down) @@ -135,10 +135,10 @@ static int mt2032_compute_freq(struct i2c_client *c, buf[3]=0x0f; //reserved buf[4]=0x1f; buf[5]=(lo2n-1) | (lo2a<<5); - if(rfin >400*1000*1000) - buf[6]=0xe4; - else - buf[6]=0xf4; // set PKEN per rev 1.2 + if(rfin >400*1000*1000) + buf[6]=0xe4; + else + buf[6]=0xf4; // set PKEN per rev 1.2 buf[7]=8+xogc; buf[8]=0xc3; //reserved buf[9]=0x4e; //reserved @@ -168,7 +168,7 @@ static int mt2032_check_lo_lock(struct i2c_client *c) tuner_dbg("mt2032: pll wait 1ms for lock (0x%2x)\n",buf[0]); udelay(1000); } - return lock; + return lock; } static int mt2032_optimize_vco(struct i2c_client *c,int sel,int lock) @@ -202,7 +202,7 @@ static int mt2032_optimize_vco(struct i2c_client *c,int sel,int lock) buf[0]=0x0f; buf[1]=sel; - i2c_master_send(c,buf,2); + i2c_master_send(c,buf,2); lock=mt2032_check_lo_lock(c); return lock; } @@ -219,23 +219,23 @@ static void mt2032_set_if_freq(struct i2c_client *c, unsigned int rfin, tuner_dbg("mt2032_set_if_freq rfin=%d if1=%d if2=%d from=%d to=%d\n", rfin,if1,if2,from,to); - buf[0]=0; - ret=i2c_master_send(c,buf,1); - i2c_master_recv(c,buf,21); + buf[0]=0; + ret=i2c_master_send(c,buf,1); + i2c_master_recv(c,buf,21); buf[0]=0; ret=mt2032_compute_freq(c,rfin,if1,if2,from,to,&buf[1],&sel,t->xogc); if (ret<0) return; - // send only the relevant registers per Rev. 1.2 - buf[0]=0; - ret=i2c_master_send(c,buf,4); - buf[5]=5; - ret=i2c_master_send(c,buf+5,4); - buf[11]=11; - ret=i2c_master_send(c,buf+11,3); - if(ret!=3) + // send only the relevant registers per Rev. 1.2 + buf[0]=0; + ret=i2c_master_send(c,buf,4); + buf[5]=5; + ret=i2c_master_send(c,buf+5,4); + buf[11]=11; + ret=i2c_master_send(c,buf+11,3); + if(ret!=3) tuner_warn("i2c i/o error: rc == %d (should be 3)\n",ret); // wait for PLLs to lock (per manual), retry LINT if not. @@ -253,7 +253,7 @@ static void mt2032_set_if_freq(struct i2c_client *c, unsigned int rfin, mdelay(10); buf[1]=8+t->xogc; i2c_master_send(c,buf,2); - } + } if (lock!=6) tuner_warn("MT2032 Fatal Error: PLLs didn't lock.\n"); @@ -284,7 +284,7 @@ static void mt2032_set_tv_freq(struct i2c_client *c, unsigned int freq) if2 = 38900*1000; } - mt2032_set_if_freq(c, freq*62500 /* freq*1000*1000/16 */, + mt2032_set_if_freq(c, freq*62500 /* freq*1000*1000/16 */, 1090*1000*1000, if2, from, to); } @@ -294,7 +294,7 @@ static void mt2032_set_radio_freq(struct i2c_client *c, unsigned int freq) int if2 = t->radio_if2; // per Manual for FM tuning: first if center freq. 1085 MHz - mt2032_set_if_freq(c, freq * 1000 / 16, + mt2032_set_if_freq(c, freq * 1000 / 16, 1085*1000*1000,if2,if2,if2); } @@ -302,57 +302,57 @@ static void mt2032_set_radio_freq(struct i2c_client *c, unsigned int freq) static int mt2032_init(struct i2c_client *c) { struct tuner *t = i2c_get_clientdata(c); - unsigned char buf[21]; - int ret,xogc,xok=0; + unsigned char buf[21]; + int ret,xogc,xok=0; // Initialize Registers per spec. - buf[1]=2; // Index to register 2 - buf[2]=0xff; - buf[3]=0x0f; - buf[4]=0x1f; - ret=i2c_master_send(c,buf+1,4); - - buf[5]=6; // Index register 6 - buf[6]=0xe4; - buf[7]=0x8f; - buf[8]=0xc3; - buf[9]=0x4e; - buf[10]=0xec; - ret=i2c_master_send(c,buf+5,6); - - buf[12]=13; // Index register 13 - buf[13]=0x32; - ret=i2c_master_send(c,buf+12,2); - - // Adjust XOGC (register 7), wait for XOK - xogc=7; - do { + buf[1]=2; // Index to register 2 + buf[2]=0xff; + buf[3]=0x0f; + buf[4]=0x1f; + ret=i2c_master_send(c,buf+1,4); + + buf[5]=6; // Index register 6 + buf[6]=0xe4; + buf[7]=0x8f; + buf[8]=0xc3; + buf[9]=0x4e; + buf[10]=0xec; + ret=i2c_master_send(c,buf+5,6); + + buf[12]=13; // Index register 13 + buf[13]=0x32; + ret=i2c_master_send(c,buf+12,2); + + // Adjust XOGC (register 7), wait for XOK + xogc=7; + do { tuner_dbg("mt2032: xogc = 0x%02x\n",xogc&0x07); - mdelay(10); - buf[0]=0x0e; - i2c_master_send(c,buf,1); - i2c_master_recv(c,buf,1); - xok=buf[0]&0x01; - tuner_dbg("mt2032: xok = 0x%02x\n",xok); - if (xok == 1) break; - - xogc--; - tuner_dbg("mt2032: xogc = 0x%02x\n",xogc&0x07); - if (xogc == 3) { - xogc=4; // min. 4 per spec - break; - } - buf[0]=0x07; - buf[1]=0x88 + xogc; - ret=i2c_master_send(c,buf,2); - if (ret!=2) + mdelay(10); + buf[0]=0x0e; + i2c_master_send(c,buf,1); + i2c_master_recv(c,buf,1); + xok=buf[0]&0x01; + tuner_dbg("mt2032: xok = 0x%02x\n",xok); + if (xok == 1) break; + + xogc--; + tuner_dbg("mt2032: xogc = 0x%02x\n",xogc&0x07); + if (xogc == 3) { + xogc=4; // min. 4 per spec + break; + } + buf[0]=0x07; + buf[1]=0x88 + xogc; + ret=i2c_master_send(c,buf,2); + if (ret!=2) tuner_warn("i2c i/o error: rc == %d (should be 2)\n",ret); - } while (xok != 1 ); + } while (xok != 1 ); t->xogc=xogc; t->tv_freq = mt2032_set_tv_freq; t->radio_freq = mt2032_set_radio_freq; - return(1); + return(1); } static void mt2050_set_antenna(struct i2c_client *c, unsigned char antenna) @@ -426,7 +426,7 @@ static void mt2050_set_if_freq(struct i2c_client *c,unsigned int freq, unsigned } ret=i2c_master_send(c,buf,6); - if (ret!=6) + if (ret!=6) tuner_warn("i2c i/o error: rc == %d (should be 6)\n",ret); } @@ -437,11 +437,11 @@ static void mt2050_set_tv_freq(struct i2c_client *c, unsigned int freq) if (t->std & V4L2_STD_525_60) { // NTSC - if2 = 45750*1000; - } else { - // PAL - if2 = 38900*1000; - } + if2 = 45750*1000; + } else { + // PAL + if2 = 38900*1000; + } if (V4L2_TUNER_DIGITAL_TV == t->mode) { // DVB (pinnacle 300i) if2 = 36150*1000; @@ -455,7 +455,7 @@ static void mt2050_set_radio_freq(struct i2c_client *c, unsigned int freq) struct tuner *t = i2c_get_clientdata(c); int if2 = t->radio_if2; - mt2050_set_if_freq(c, freq*62500, if2); + mt2050_set_if_freq(c, freq * 1000 / 16, if2); mt2050_set_antenna(c, radio_antenna); } @@ -487,7 +487,7 @@ int microtune_init(struct i2c_client *c) { struct tuner *t = i2c_get_clientdata(c); char *name; - unsigned char buf[21]; + unsigned char buf[21]; int company_code; memset(buf,0,sizeof(buf)); @@ -496,17 +496,17 @@ int microtune_init(struct i2c_client *c) t->standby = NULL; name = "unknown"; - i2c_master_send(c,buf,1); - i2c_master_recv(c,buf,21); - if (tuner_debug) { - int i; + i2c_master_send(c,buf,1); + i2c_master_recv(c,buf,21); + if (tuner_debug) { + int i; tuner_dbg("MT20xx hexdump:"); - for(i=0;i<21;i++) { - printk(" %02x",buf[i]); - if(((i+1)%8)==0) printk(" "); - } - printk("\n"); - } + for(i=0;i<21;i++) { + printk(" %02x",buf[i]); + if(((i+1)%8)==0) printk(" "); + } + printk("\n"); + } company_code = buf[0x11] << 8 | buf[0x12]; tuner_info("microtune: companycode=%04x part=%02x rev=%02x\n", company_code,buf[0x13],buf[0x14]); @@ -525,8 +525,8 @@ int microtune_init(struct i2c_client *c) default: tuner_info("microtune %s found, not (yet?) supported, sorry :-/\n", name); - return 0; - } + return 0; + } strlcpy(c->name, name, sizeof(c->name)); tuner_info("microtune %s found, OK\n",name); diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c index 72b70eb5da1d..dca3ddfd510f 100644 --- a/drivers/media/video/saa6588.c +++ b/drivers/media/video/saa6588.c @@ -31,7 +31,6 @@ #include <linux/wait.h> #include <asm/uaccess.h> -#include <media/id.h> #include "rds.h" @@ -246,7 +245,7 @@ static void block_to_buf(struct saa6588 *s, unsigned char *blockbuf) s->wr_index = 0; if (s->wr_index == s->rd_index) { - s->rd_index++; + s->rd_index += 3; if (s->rd_index >= s->buf_size) s->rd_index = 0; } else @@ -328,7 +327,7 @@ static void saa6588_work(void *data) struct saa6588 *s = (struct saa6588 *)data; saa6588_i2c_poll(s); - mod_timer(&s->timer, jiffies + HZ / 50); /* 20 msec */ + mod_timer(&s->timer, jiffies + msecs_to_jiffies(20)); } static int saa6588_configure(struct saa6588 *s) @@ -434,9 +433,9 @@ static int saa6588_probe(struct i2c_adapter *adap) return i2c_probe(adap, &addr_data, saa6588_attach); #else switch (adap->id) { - case I2C_ALGO_BIT | I2C_HW_B_BT848: - case I2C_ALGO_BIT | I2C_HW_B_RIVA: - case I2C_ALGO_SAA7134: + case I2C_HW_B_BT848: + case I2C_HW_B_RIVA: + case I2C_HW_SAA7134: return i2c_probe(adap, &addr_data, saa6588_attach); break; } diff --git a/drivers/media/video/saa711x.c b/drivers/media/video/saa711x.c new file mode 100644 index 000000000000..9aa8827de2c3 --- /dev/null +++ b/drivers/media/video/saa711x.c @@ -0,0 +1,593 @@ +/* + * saa711x - Philips SAA711x video decoder driver version 0.0.1 + * + * To do: Now, it handles only saa7113/7114. Should be improved to + * handle all Philips saa711x devices. + * + * Based on saa7113 driver from Dave Perks <dperks@ibm.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/major.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/pci.h> +#include <linux/signal.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <linux/sched.h> +#include <asm/segment.h> +#include <linux/types.h> +#include <asm/uaccess.h> +#include <linux/videodev.h> + +MODULE_DESCRIPTION("Philips SAA711x video decoder driver"); +MODULE_AUTHOR("Dave Perks, Jose Ignacio Gijon, Joerg Heckenbach, Mark McClelland, Dwaine Garden"); +MODULE_LICENSE("GPL"); + +#include <linux/i2c.h> +#include <linux/i2c-dev.h> + +#define I2C_NAME(s) (s)->name + +#include <linux/video_decoder.h> + +static int debug = 0; +MODULE_PARM(debug, "i"); +MODULE_PARM_DESC(debug, " Set the default Debug level. Default: 0 (Off) - (0-1)"); + + +#define dprintk(num, format, args...) \ + do { \ + if (debug >= num) \ + printk(format , ##args); \ + } while (0) + +/* ----------------------------------------------------------------------- */ + +struct saa711x { + unsigned char reg[32]; + + int norm; + int input; + int enable; + int bright; + int contrast; + int hue; + int sat; +}; + +#define I2C_SAA7113 0x4A +#define I2C_SAA7114 0x42 + +/* ----------------------------------------------------------------------- */ + +static inline int +saa711x_write (struct i2c_client *client, + u8 reg, + u8 value) +{ + struct saa711x *decoder = i2c_get_clientdata(client); + + decoder->reg[reg] = value; + return i2c_smbus_write_byte_data(client, reg, value); +} + +static int +saa711x_write_block (struct i2c_client *client, + const u8 *data, + unsigned int len) +{ + int ret = -1; + u8 reg; + + /* the saa711x has an autoincrement function, use it if + * the adapter understands raw I2C */ + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + /* do raw I2C, not smbus compatible */ + struct saa711x *decoder = i2c_get_clientdata(client); + struct i2c_msg msg; + u8 block_data[32]; + + msg.addr = client->addr; + msg.flags = 0; + while (len >= 2) { + msg.buf = (char *) block_data; + msg.len = 0; + block_data[msg.len++] = reg = data[0]; + do { + block_data[msg.len++] = + decoder->reg[reg++] = data[1]; + len -= 2; + data += 2; + } while (len >= 2 && data[0] == reg && + msg.len < 32); + if ((ret = i2c_transfer(client->adapter, + &msg, 1)) < 0) + break; + } + } else { + /* do some slow I2C emulation kind of thing */ + while (len >= 2) { + reg = *data++; + if ((ret = saa711x_write(client, reg, + *data++)) < 0) + break; + len -= 2; + } + } + + return ret; +} + +static int +saa711x_init_decoder (struct i2c_client *client, + struct video_decoder_init *init) +{ + return saa711x_write_block(client, init->data, init->len); +} + +static inline int +saa711x_read (struct i2c_client *client, + u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +/* ----------------------------------------------------------------------- */ + +static const unsigned char saa711x_i2c_init[] = { + 0x00, 0x00, /* PH711x_CHIP_VERSION 00 - ID byte */ + 0x01, 0x08, /* PH711x_INCREMENT_DELAY - (1) (1) (1) (1) IDEL3 IDEL2 IDELL1 IDEL0 */ + 0x02, 0xc0, /* PH711x_ANALOG_INPUT_CONTR_1 - FUSE1 FUSE0 GUDL1 GUDL0 MODE3 MODE2 MODE1 MODE0 */ + 0x03, 0x23, /* PH711x_ANALOG_INPUT_CONTR_2 - (1) HLNRS VBSL WPOFF HOLDG GAFIX GAI28 GAI18 */ + 0x04, 0x00, /* PH711x_ANALOG_INPUT_CONTR_3 - GAI17 GAI16 GAI15 GAI14 GAI13 GAI12 GAI11 GAI10 */ + 0x05, 0x00, /* PH711x_ANALOG_INPUT_CONTR_4 - GAI27 GAI26 GAI25 GAI24 GAI23 GAI22 GAI21 GAI20 */ + 0x06, 0xeb, /* PH711x_HORIZONTAL_SYNC_START - HSB7 HSB6 HSB5 HSB4 HSB3 HSB2 HSB1 HSB0 */ + 0x07, 0xe0, /* PH711x_HORIZONTAL_SYNC_STOP - HSS7 HSS6 HSS5 HSS4 HSS3 HSS2 HSS1 HSS0 */ + 0x08, 0x88, /* PH711x_SYNC_CONTROL - AUFD FSEL FOET HTC1 HTC0 HPLL VNOI1 VNOI0 */ + 0x09, 0x00, /* PH711x_LUMINANCE_CONTROL - BYPS PREF BPSS1 BPSS0 VBLB UPTCV APER1 APER0 */ + 0x0a, 0x80, /* PH711x_LUMINANCE_BRIGHTNESS - BRIG7 BRIG6 BRIG5 BRIG4 BRIG3 BRIG2 BRIG1 BRIG0 */ + 0x0b, 0x47, /* PH711x_LUMINANCE_CONTRAST - CONT7 CONT6 CONT5 CONT4 CONT3 CONT2 CONT1 CONT0 */ + 0x0c, 0x40, /* PH711x_CHROMA_SATURATION - SATN7 SATN6 SATN5 SATN4 SATN3 SATN2 SATN1 SATN0 */ + 0x0d, 0x00, /* PH711x_CHROMA_HUE_CONTROL - HUEC7 HUEC6 HUEC5 HUEC4 HUEC3 HUEC2 HUEC1 HUEC0 */ + 0x0e, 0x01, /* PH711x_CHROMA_CONTROL - CDTO CSTD2 CSTD1 CSTD0 DCCF FCTC CHBW1 CHBW0 */ + 0x0f, 0xaa, /* PH711x_CHROMA_GAIN_CONTROL - ACGC CGAIN6 CGAIN5 CGAIN4 CGAIN3 CGAIN2 CGAIN1 CGAIN0 */ + 0x10, 0x00, /* PH711x_FORMAT_DELAY_CONTROL - OFTS1 OFTS0 HDEL1 HDEL0 VRLN YDEL2 YDEL1 YDEL0 */ + 0x11, 0x1C, /* PH711x_OUTPUT_CONTROL_1 - GPSW1 CM99 GPSW0 HLSEL OEYC OERT VIPB COLO */ + 0x12, 0x01, /* PH711x_OUTPUT_CONTROL_2 - RTSE13 RTSE12 RTSE11 RTSE10 RTSE03 RTSE02 RTSE01 RTSE00 */ + 0x13, 0x00, /* PH711x_OUTPUT_CONTROL_3 - ADLSB (1) (1) OLDSB FIDP (1) AOSL1 AOSL0 */ + 0x14, 0x00, /* RESERVED 14 - (1) (1) (1) (1) (1) (1) (1) (1) */ + 0x15, 0x00, /* PH711x_V_GATE1_START - VSTA7 VSTA6 VSTA5 VSTA4 VSTA3 VSTA2 VSTA1 VSTA0 */ + 0x16, 0x00, /* PH711x_V_GATE1_STOP - VSTO7 VSTO6 VSTO5 VSTO4 VSTO3 VSTO2 VSTO1 VSTO0 */ + 0x17, 0x00, /* PH711x_V_GATE1_MSB - (1) (1) (1) (1) (1) (1) VSTO8 VSTA8 */ +}; + +static int +saa711x_command (struct i2c_client *client, + unsigned int cmd, + void *arg) +{ + struct saa711x *decoder = i2c_get_clientdata(client); + + switch (cmd) { + + case 0: + case DECODER_INIT: + { + struct video_decoder_init *init = arg; + if (NULL != init) + return saa711x_init_decoder(client, init); + else { + struct video_decoder_init vdi; + vdi.data = saa711x_i2c_init; + vdi.len = sizeof(saa711x_i2c_init); + return saa711x_init_decoder(client, &vdi); + } + } + + case DECODER_DUMP: + { + int i; + + for (i = 0; i < 32; i += 16) { + int j; + + printk(KERN_DEBUG "%s: %03x", I2C_NAME(client), i); + for (j = 0; j < 16; ++j) { + printk(" %02x", + saa711x_read(client, i + j)); + } + printk("\n"); + } + } + break; + + case DECODER_GET_CAPABILITIES: + { + struct video_decoder_capability *cap = arg; + + cap->flags = VIDEO_DECODER_PAL | + VIDEO_DECODER_NTSC | + VIDEO_DECODER_SECAM | + VIDEO_DECODER_AUTO | + VIDEO_DECODER_CCIR; + cap->inputs = 8; + cap->outputs = 1; + } + break; + + case DECODER_GET_STATUS: + { + int *iarg = arg; + int status; + int res; + + status = saa711x_read(client, 0x1f); + dprintk(1, KERN_DEBUG "%s status: 0x%02x\n", I2C_NAME(client), + status); + res = 0; + if ((status & (1 << 6)) == 0) { + res |= DECODER_STATUS_GOOD; + } + switch (decoder->norm) { + case VIDEO_MODE_NTSC: + res |= DECODER_STATUS_NTSC; + break; + case VIDEO_MODE_PAL: + res |= DECODER_STATUS_PAL; + break; + case VIDEO_MODE_SECAM: + res |= DECODER_STATUS_SECAM; + break; + default: + case VIDEO_MODE_AUTO: + if ((status & (1 << 5)) != 0) { + res |= DECODER_STATUS_NTSC; + } else { + res |= DECODER_STATUS_PAL; + } + break; + } + if ((status & (1 << 0)) != 0) { + res |= DECODER_STATUS_COLOR; + } + *iarg = res; + } + break; + + case DECODER_SET_GPIO: + { + int *iarg = arg; + if (0 != *iarg) { + saa711x_write(client, 0x11, + (decoder->reg[0x11] | 0x80)); + } else { + saa711x_write(client, 0x11, + (decoder->reg[0x11] & 0x7f)); + } + break; + } + + case DECODER_SET_VBI_BYPASS: + { + int *iarg = arg; + if (0 != *iarg) { + saa711x_write(client, 0x13, + (decoder->reg[0x13] & 0xf0) | 0x0a); + } else { + saa711x_write(client, 0x13, + (decoder->reg[0x13] & 0xf0)); + } + break; + } + + case DECODER_SET_NORM: + { + int *iarg = arg; + + switch (*iarg) { + + case VIDEO_MODE_NTSC: + saa711x_write(client, 0x08, + (decoder->reg[0x08] & 0x3f) | 0x40); + saa711x_write(client, 0x0e, + (decoder->reg[0x0e] & 0x8f)); + break; + + case VIDEO_MODE_PAL: + saa711x_write(client, 0x08, + (decoder->reg[0x08] & 0x3f) | 0x00); + saa711x_write(client, 0x0e, + (decoder->reg[0x0e] & 0x8f)); + break; + + case VIDEO_MODE_SECAM: + saa711x_write(client, 0x08, + (decoder->reg[0x0e] & 0x3f) | 0x00); + saa711x_write(client, 0x0e, + (decoder->reg[0x0e] & 0x8f) | 0x50); + break; + + case VIDEO_MODE_AUTO: + saa711x_write(client, 0x08, + (decoder->reg[0x08] & 0x3f) | 0x80); + saa711x_write(client, 0x0e, + (decoder->reg[0x0e] & 0x8f)); + break; + + default: + return -EINVAL; + + } + decoder->norm = *iarg; + } + break; + + case DECODER_SET_INPUT: + { + int *iarg = arg; + if (*iarg < 0 || *iarg > 9) { + return -EINVAL; + } + if (decoder->input != *iarg) { + decoder->input = *iarg; + /* select mode */ + saa711x_write(client, 0x02, + (decoder->reg[0x02] & 0xf0) | decoder->input); + /* bypass chrominance trap for modes 4..7 */ + saa711x_write(client, 0x09, + (decoder->reg[0x09] & 0x7f) | ((decoder->input > 3) ? 0x80 : 0)); + } + } + break; + + case DECODER_SET_OUTPUT: + { + int *iarg = arg; + + /* not much choice of outputs */ + if (*iarg != 0) { + return -EINVAL; + } + } + break; + + case DECODER_ENABLE_OUTPUT: + { + int *iarg = arg; + int enable = (*iarg != 0); + + if (decoder->enable != enable) { + decoder->enable = enable; + + /* RJ: If output should be disabled (for + * playing videos), we also need a open PLL. + * The input is set to 0 (where no input + * source is connected), although this + * is not necessary. + * + * If output should be enabled, we have to + * reverse the above. + */ + + if (decoder->enable) { + saa711x_write(client, 0x02, + (decoder-> + reg[0x02] & 0xf8) | + decoder->input); + saa711x_write(client, 0x08, + (decoder->reg[0x08] & 0xfb)); + saa711x_write(client, 0x11, + (decoder-> + reg[0x11] & 0xf3) | 0x0c); + } else { + saa711x_write(client, 0x02, + (decoder->reg[0x02] & 0xf8)); + saa711x_write(client, 0x08, + (decoder-> + reg[0x08] & 0xfb) | 0x04); + saa711x_write(client, 0x11, + (decoder->reg[0x11] & 0xf3)); + } + } + } + break; + + case DECODER_SET_PICTURE: + { + struct video_picture *pic = arg; + + if (decoder->bright != pic->brightness) { + /* We want 0 to 255 we get 0-65535 */ + decoder->bright = pic->brightness; + saa711x_write(client, 0x0a, decoder->bright >> 8); + } + if (decoder->contrast != pic->contrast) { + /* We want 0 to 127 we get 0-65535 */ + decoder->contrast = pic->contrast; + saa711x_write(client, 0x0b, + decoder->contrast >> 9); + } + if (decoder->sat != pic->colour) { + /* We want 0 to 127 we get 0-65535 */ + decoder->sat = pic->colour; + saa711x_write(client, 0x0c, decoder->sat >> 9); + } + if (decoder->hue != pic->hue) { + /* We want -128 to 127 we get 0-65535 */ + decoder->hue = pic->hue; + saa711x_write(client, 0x0d, + (decoder->hue - 32768) >> 8); + } + } + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +/* + * Generic i2c probe + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' + */ + +/* standard i2c insmod options */ +static unsigned short normal_i2c[] = { + I2C_SAA7113>>1, /* saa7113 */ + I2C_SAA7114>>1, /* saa7114 */ + I2C_CLIENT_END +}; + +I2C_CLIENT_INSMOD; + + +static struct i2c_driver i2c_driver_saa711x; + +static int +saa711x_detect_client (struct i2c_adapter *adapter, + int address, + int kind) +{ + int i; + struct i2c_client *client; + struct saa711x *decoder; + struct video_decoder_init vdi; + + dprintk(1, + KERN_INFO + "saa711x.c: detecting saa711x client on address 0x%x\n", + address << 1); + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return 0; + + client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (client == 0) + return -ENOMEM; + memset(client, 0, sizeof(struct i2c_client)); + client->addr = address; + client->adapter = adapter; + client->driver = &i2c_driver_saa711x; + client->flags = I2C_CLIENT_ALLOW_USE; + strlcpy(I2C_NAME(client), "saa711x", sizeof(I2C_NAME(client))); + decoder = kmalloc(sizeof(struct saa711x), GFP_KERNEL); + if (decoder == NULL) { + kfree(client); + return -ENOMEM; + } + memset(decoder, 0, sizeof(struct saa711x)); + decoder->norm = VIDEO_MODE_NTSC; + decoder->input = 0; + decoder->enable = 1; + decoder->bright = 32768; + decoder->contrast = 32768; + decoder->hue = 32768; + decoder->sat = 32768; + i2c_set_clientdata(client, decoder); + + i = i2c_attach_client(client); + if (i) { + kfree(client); + kfree(decoder); + return i; + } + + vdi.data = saa711x_i2c_init; + vdi.len = sizeof(saa711x_i2c_init); + i = saa711x_init_decoder(client, &vdi); + if (i < 0) { + dprintk(1, KERN_ERR "%s_attach error: init status %d\n", + I2C_NAME(client), i); + } else { + dprintk(1, + KERN_INFO + "%s_attach: chip version %x at address 0x%x\n", + I2C_NAME(client), saa711x_read(client, 0x00) >> 4, + client->addr << 1); + } + + return 0; +} + +static int +saa711x_attach_adapter (struct i2c_adapter *adapter) +{ + dprintk(1, + KERN_INFO + "saa711x.c: starting probe for adapter %s (0x%x)\n", + I2C_NAME(adapter), adapter->id); + return i2c_probe(adapter, &addr_data, &saa711x_detect_client); +} + +static int +saa711x_detach_client (struct i2c_client *client) +{ + struct saa711x *decoder = i2c_get_clientdata(client); + int err; + + err = i2c_detach_client(client); + if (err) { + return err; + } + + kfree(decoder); + kfree(client); + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static struct i2c_driver i2c_driver_saa711x = { + .owner = THIS_MODULE, + .name = "saa711x", + + .id = I2C_DRIVERID_SAA711X, + .flags = I2C_DF_NOTIFY, + + .attach_adapter = saa711x_attach_adapter, + .detach_client = saa711x_detach_client, + .command = saa711x_command, +}; + +static int __init +saa711x_init (void) +{ + return i2c_add_driver(&i2c_driver_saa711x); +} + +static void __exit +saa711x_exit (void) +{ + i2c_del_driver(&i2c_driver_saa711x); +} + +module_init(saa711x_init); +module_exit(saa711x_exit); diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig new file mode 100644 index 000000000000..624e8808a517 --- /dev/null +++ b/drivers/media/video/saa7134/Kconfig @@ -0,0 +1,68 @@ +config VIDEO_SAA7134 + tristate "Philips SAA7134 support" + depends on VIDEO_DEV && PCI && I2C && SOUND + select VIDEO_BUF + select VIDEO_IR + select VIDEO_TUNER + select CRC32 + ---help--- + This is a video4linux driver for Philips SAA713x based + TV cards. + + To compile this driver as a module, choose M here: the + module will be called saa7134. + +config VIDEO_SAA7134_DVB + tristate "DVB/ATSC Support for saa7134 based TV cards" + depends on VIDEO_SAA7134 && DVB_CORE + select VIDEO_BUF_DVB + ---help--- + This adds support for DVB cards based on the + Philips saa7134 chip. + + To compile this driver as a module, choose M here: the + module will be called saa7134-dvb. + + You must also select one or more DVB demodulators. + If you are unsure which you need, choose all of them. + +config VIDEO_SAA7134_DVB_ALL_FRONTENDS + bool "Build all supported frontends for saa7134 based TV cards" + default y + depends on VIDEO_SAA7134_DVB + select DVB_MT352 + select DVB_TDA1004X + select DVB_NXT200X + ---help--- + This builds saa7134-dvb with all currently supported frontend + demodulators. If you wish to tweak your configuration, and + only include support for the hardware that you need, choose N here. + + If you are unsure, choose Y. + +config VIDEO_SAA7134_DVB_MT352 + tristate "Zarlink MT352 DVB-T Support" + default m + depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS + select DVB_MT352 + ---help--- + This adds DVB-T support for cards based on the + Philips saa7134 chip and the MT352 demodulator. + +config VIDEO_SAA7134_DVB_TDA1004X + tristate "Phillips TDA10045H/TDA10046H DVB-T Support" + default m + depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS + select DVB_TDA1004X + ---help--- + This adds DVB-T support for cards based on the + Philips saa7134 chip and the TDA10045H/TDA10046H demodulator. + +config VIDEO_SAA7134_DVB_NXT200X + tristate "NXT2002/NXT2004 ATSC Support" + default m + depends on VIDEO_SAA7134_DVB && !VIDEO_SAA7134_DVB_ALL_FRONTENDS + select DVB_NXT200X + ---help--- + This adds ATSC 8VSB and QAM64/256 support for cards based on the + Philips saa7134 chip and the NXT2002/NXT2004 demodulator. diff --git a/drivers/media/video/saa7134/Makefile b/drivers/media/video/saa7134/Makefile index b778ffd94e65..e0b28f0533af 100644 --- a/drivers/media/video/saa7134/Makefile +++ b/drivers/media/video/saa7134/Makefile @@ -3,15 +3,22 @@ saa7134-objs := saa7134-cards.o saa7134-core.o saa7134-i2c.o \ saa7134-oss.o saa7134-ts.o saa7134-tvaudio.o \ saa7134-vbi.o saa7134-video.o saa7134-input.o -obj-$(CONFIG_VIDEO_SAA7134) += saa7134.o saa7134-empress.o saa6752hs.o +obj-$(CONFIG_VIDEO_SAA7134) += saa7134.o saa7134-empress.o \ + saa6752hs.o saa7134-alsa.o obj-$(CONFIG_VIDEO_SAA7134_DVB) += saa7134-dvb.o EXTRA_CFLAGS += -I$(src)/.. EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/frontends +ifneq ($(CONFIG_VIDEO_BUF_DVB),n) + EXTRA_CFLAGS += -DHAVE_VIDEO_BUF_DVB=1 +endif ifneq ($(CONFIG_DVB_MT352),n) EXTRA_CFLAGS += -DHAVE_MT352=1 endif ifneq ($(CONFIG_DVB_TDA1004X),n) EXTRA_CFLAGS += -DHAVE_TDA1004X=1 endif +ifneq ($(CONFIG_DVB_NXT200X),n) + EXTRA_CFLAGS += -DHAVE_NXT200X=1 +endif diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c index 382911c6ef22..cdd1ed9c8065 100644 --- a/drivers/media/video/saa7134/saa6752hs.c +++ b/drivers/media/video/saa7134/saa6752hs.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/crc32.h> -#include <media/id.h> #define MPEG_VIDEO_TARGET_BITRATE_MAX 27000 #define MPEG_VIDEO_MAX_BITRATE_MAX 27000 @@ -57,6 +56,7 @@ struct saa6752hs_state { struct i2c_client client; struct v4l2_mpeg_compression params; enum saa6752hs_videoformat video_format; + v4l2_std_id standard; }; enum saa6752hs_command { @@ -74,58 +74,58 @@ enum saa6752hs_command { /* ---------------------------------------------------------------------- */ static u8 PAT[] = { - 0xc2, // i2c register - 0x00, // table number for encoder + 0xc2, /* i2c register */ + 0x00, /* table number for encoder */ - 0x47, // sync - 0x40, 0x00, // transport_error_indicator(0), payload_unit_start(1), transport_priority(0), pid(0) - 0x10, // transport_scrambling_control(00), adaptation_field_control(01), continuity_counter(0) + 0x47, /* sync */ + 0x40, 0x00, /* transport_error_indicator(0), payload_unit_start(1), transport_priority(0), pid(0) */ + 0x10, /* transport_scrambling_control(00), adaptation_field_control(01), continuity_counter(0) */ - 0x00, // PSI pointer to start of table + 0x00, /* PSI pointer to start of table */ - 0x00, // tid(0) - 0xb0, 0x0d, // section_syntax_indicator(1), section_length(13) + 0x00, /* tid(0) */ + 0xb0, 0x0d, /* section_syntax_indicator(1), section_length(13) */ - 0x00, 0x01, // transport_stream_id(1) + 0x00, 0x01, /* transport_stream_id(1) */ - 0xc1, // version_number(0), current_next_indicator(1) + 0xc1, /* version_number(0), current_next_indicator(1) */ - 0x00, 0x00, // section_number(0), last_section_number(0) + 0x00, 0x00, /* section_number(0), last_section_number(0) */ - 0x00, 0x01, // program_number(1) + 0x00, 0x01, /* program_number(1) */ - 0xe0, 0x00, // PMT PID + 0xe0, 0x00, /* PMT PID */ - 0x00, 0x00, 0x00, 0x00 // CRC32 + 0x00, 0x00, 0x00, 0x00 /* CRC32 */ }; static u8 PMT[] = { - 0xc2, // i2c register - 0x01, // table number for encoder + 0xc2, /* i2c register */ + 0x01, /* table number for encoder */ - 0x47, // sync - 0x40, 0x00, // transport_error_indicator(0), payload_unit_start(1), transport_priority(0), pid - 0x10, // transport_scrambling_control(00), adaptation_field_control(01), continuity_counter(0) + 0x47, /* sync */ + 0x40, 0x00, /* transport_error_indicator(0), payload_unit_start(1), transport_priority(0), pid */ + 0x10, /* transport_scrambling_control(00), adaptation_field_control(01), continuity_counter(0) */ - 0x00, // PSI pointer to start of table + 0x00, /* PSI pointer to start of table */ - 0x02, // tid(2) - 0xb0, 0x17, // section_syntax_indicator(1), section_length(23) + 0x02, /* tid(2) */ + 0xb0, 0x17, /* section_syntax_indicator(1), section_length(23) */ - 0x00, 0x01, // program_number(1) + 0x00, 0x01, /* program_number(1) */ - 0xc1, // version_number(0), current_next_indicator(1) + 0xc1, /* version_number(0), current_next_indicator(1) */ - 0x00, 0x00, // section_number(0), last_section_number(0) + 0x00, 0x00, /* section_number(0), last_section_number(0) */ - 0xe0, 0x00, // PCR_PID + 0xe0, 0x00, /* PCR_PID */ - 0xf0, 0x00, // program_info_length(0) + 0xf0, 0x00, /* program_info_length(0) */ - 0x02, 0xe0, 0x00, 0xf0, 0x00, // video stream type(2), pid - 0x04, 0xe0, 0x00, 0xf0, 0x00, // audio stream type(4), pid + 0x02, 0xe0, 0x00, 0xf0, 0x00, /* video stream type(2), pid */ + 0x04, 0xe0, 0x00, 0xf0, 0x00, /* audio stream type(4), pid */ - 0x00, 0x00, 0x00, 0x00 // CRC32 + 0x00, 0x00, 0x00, 0x00 /* CRC32 */ }; static struct v4l2_mpeg_compression param_defaults = @@ -166,33 +166,33 @@ static int saa6752hs_chip_command(struct i2c_client* client, unsigned long timeout; int status = 0; - // execute the command + /* execute the command */ switch(command) { - case SAA6752HS_COMMAND_RESET: - buf[0] = 0x00; + case SAA6752HS_COMMAND_RESET: + buf[0] = 0x00; break; case SAA6752HS_COMMAND_STOP: - buf[0] = 0x03; + buf[0] = 0x03; break; case SAA6752HS_COMMAND_START: - buf[0] = 0x02; + buf[0] = 0x02; break; case SAA6752HS_COMMAND_PAUSE: - buf[0] = 0x04; + buf[0] = 0x04; break; case SAA6752HS_COMMAND_RECONFIGURE: buf[0] = 0x05; break; - case SAA6752HS_COMMAND_SLEEP: - buf[0] = 0x06; + case SAA6752HS_COMMAND_SLEEP: + buf[0] = 0x06; break; - case SAA6752HS_COMMAND_RECONFIGURE_FORCE: + case SAA6752HS_COMMAND_RECONFIGURE_FORCE: buf[0] = 0x07; break; @@ -200,13 +200,13 @@ static int saa6752hs_chip_command(struct i2c_client* client, return -EINVAL; } - // set it and wait for it to be so + /* set it and wait for it to be so */ i2c_master_send(client, buf, 1); timeout = jiffies + HZ * 3; for (;;) { - // get the current status + /* get the current status */ buf[0] = 0x10; - i2c_master_send(client, buf, 1); + i2c_master_send(client, buf, 1); i2c_master_recv(client, buf, 1); if (!(buf[0] & 0x20)) @@ -216,61 +216,58 @@ static int saa6752hs_chip_command(struct i2c_client* client, break; } - // wait a bit msleep(10); } - // delay a bit to let encoder settle + /* delay a bit to let encoder settle */ msleep(50); - // done - return status; + return status; } static int saa6752hs_set_bitrate(struct i2c_client* client, struct v4l2_mpeg_compression* params) { - u8 buf[3]; + u8 buf[3]; - // set the bitrate mode + /* set the bitrate mode */ buf[0] = 0x71; buf[1] = (params->vi_bitrate.mode == V4L2_BITRATE_VBR) ? 0 : 1; i2c_master_send(client, buf, 2); - // set the video bitrate + /* set the video bitrate */ if (params->vi_bitrate.mode == V4L2_BITRATE_VBR) { - // set the target bitrate + /* set the target bitrate */ buf[0] = 0x80; buf[1] = params->vi_bitrate.target >> 8; - buf[2] = params->vi_bitrate.target & 0xff; + buf[2] = params->vi_bitrate.target & 0xff; i2c_master_send(client, buf, 3); - // set the max bitrate + /* set the max bitrate */ buf[0] = 0x81; buf[1] = params->vi_bitrate.max >> 8; - buf[2] = params->vi_bitrate.max & 0xff; + buf[2] = params->vi_bitrate.max & 0xff; i2c_master_send(client, buf, 3); } else { - // set the target bitrate (no max bitrate for CBR) - buf[0] = 0x81; + /* set the target bitrate (no max bitrate for CBR) */ + buf[0] = 0x81; buf[1] = params->vi_bitrate.target >> 8; - buf[2] = params->vi_bitrate.target & 0xff; + buf[2] = params->vi_bitrate.target & 0xff; i2c_master_send(client, buf, 3); } - // set the audio bitrate - buf[0] = 0x94; + /* set the audio bitrate */ + buf[0] = 0x94; buf[1] = (256 == params->au_bitrate.target) ? 0 : 1; i2c_master_send(client, buf, 2); - // set the total bitrate + /* set the total bitrate */ buf[0] = 0xb1; - buf[1] = params->st_bitrate.target >> 8; - buf[2] = params->st_bitrate.target & 0xff; + buf[1] = params->st_bitrate.target >> 8; + buf[2] = params->st_bitrate.target & 0xff; i2c_master_send(client, buf, 3); - // return success return 0; } @@ -376,36 +373,43 @@ static int saa6752hs_init(struct i2c_client* client) h = i2c_get_clientdata(client); - // Set video format - must be done first as it resets other settings + /* Set video format - must be done first as it resets other settings */ buf[0] = 0x41; buf[1] = h->video_format; i2c_master_send(client, buf, 2); - // set bitrate - saa6752hs_set_bitrate(client, &h->params); + /* Set number of lines in input signal */ + buf[0] = 0x40; + buf[1] = 0x00; + if (h->standard & V4L2_STD_525_60) + buf[1] = 0x01; + i2c_master_send(client, buf, 2); + + /* set bitrate */ + saa6752hs_set_bitrate(client, &h->params); - // Set GOP structure {3, 13} + /* Set GOP structure {3, 13} */ buf[0] = 0x72; buf[1] = 0x03; buf[2] = 0x0D; i2c_master_send(client,buf,3); - // Set minimum Q-scale {4} + /* Set minimum Q-scale {4} */ buf[0] = 0x82; buf[1] = 0x04; i2c_master_send(client,buf,2); - // Set maximum Q-scale {12} + /* Set maximum Q-scale {12} */ buf[0] = 0x83; buf[1] = 0x0C; i2c_master_send(client,buf,2); - // Set Output Protocol + /* Set Output Protocol */ buf[0] = 0xD0; buf[1] = 0x81; i2c_master_send(client,buf,2); - // Set video output stream format {TS} + /* Set video output stream format {TS} */ buf[0] = 0xB0; buf[1] = 0x05; i2c_master_send(client,buf,2); @@ -421,9 +425,9 @@ static int saa6752hs_init(struct i2c_client* client) localPAT[sizeof(PAT) - 1] = crc & 0xFF; /* compute PMT */ - memcpy(localPMT, PMT, sizeof(PMT)); - localPMT[3] = 0x40 | ((h->params.ts_pid_pmt >> 8) & 0x0f); - localPMT[4] = h->params.ts_pid_pmt & 0xff; + memcpy(localPMT, PMT, sizeof(PMT)); + localPMT[3] = 0x40 | ((h->params.ts_pid_pmt >> 8) & 0x0f); + localPMT[4] = h->params.ts_pid_pmt & 0xff; localPMT[15] = 0xE0 | ((h->params.ts_pid_pcr >> 8) & 0x0F); localPMT[16] = h->params.ts_pid_pcr & 0xFF; localPMT[20] = 0xE0 | ((h->params.ts_pid_video >> 8) & 0x0F); @@ -436,39 +440,39 @@ static int saa6752hs_init(struct i2c_client* client) localPMT[sizeof(PMT) - 2] = (crc >> 8) & 0xFF; localPMT[sizeof(PMT) - 1] = crc & 0xFF; - // Set Audio PID + /* Set Audio PID */ buf[0] = 0xC1; buf[1] = (h->params.ts_pid_audio >> 8) & 0xFF; buf[2] = h->params.ts_pid_audio & 0xFF; i2c_master_send(client,buf,3); - // Set Video PID + /* Set Video PID */ buf[0] = 0xC0; buf[1] = (h->params.ts_pid_video >> 8) & 0xFF; buf[2] = h->params.ts_pid_video & 0xFF; i2c_master_send(client,buf,3); - // Set PCR PID + /* Set PCR PID */ buf[0] = 0xC4; buf[1] = (h->params.ts_pid_pcr >> 8) & 0xFF; buf[2] = h->params.ts_pid_pcr & 0xFF; i2c_master_send(client,buf,3); - // Send SI tables + /* Send SI tables */ i2c_master_send(client,localPAT,sizeof(PAT)); i2c_master_send(client,localPMT,sizeof(PMT)); - // mute then unmute audio. This removes buzzing artefacts + /* mute then unmute audio. This removes buzzing artefacts */ buf[0] = 0xa4; buf[1] = 1; i2c_master_send(client, buf, 2); - buf[1] = 0; + buf[1] = 0; i2c_master_send(client, buf, 2); - // start it going + /* start it going */ saa6752hs_chip_command(client, SAA6752HS_COMMAND_START); - // readout current state + /* readout current state */ buf[0] = 0xE1; buf[1] = 0xA7; buf[2] = 0xFE; @@ -477,7 +481,7 @@ static int saa6752hs_init(struct i2c_client* client) i2c_master_send(client, buf, 5); i2c_master_recv(client, buf2, 4); - // change aspect ratio + /* change aspect ratio */ buf[0] = 0xE0; buf[1] = 0xA7; buf[2] = 0xFE; @@ -498,7 +502,6 @@ static int saa6752hs_init(struct i2c_client* client) buf[8] = buf2[3]; i2c_master_send(client, buf, 9); - // return success return 0; } @@ -506,16 +509,19 @@ static int saa6752hs_attach(struct i2c_adapter *adap, int addr, int kind) { struct saa6752hs_state *h; - printk("saa6752hs: chip found @ 0x%x\n", addr<<1); + printk("saa6752hs: chip found @ 0x%x\n", addr<<1); - if (NULL == (h = kmalloc(sizeof(*h), GFP_KERNEL))) - return -ENOMEM; + if (NULL == (h = kmalloc(sizeof(*h), GFP_KERNEL))) + return -ENOMEM; memset(h,0,sizeof(*h)); h->client = client_template; h->params = param_defaults; h->client.adapter = adap; h->client.addr = addr; + /* Assume 625 input lines */ + h->standard = 0; + i2c_set_clientdata(&h->client, h); i2c_attach_client(&h->client); return 0; @@ -545,7 +551,7 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) struct v4l2_mpeg_compression *params = arg; int err = 0; - switch (cmd) { + switch (cmd) { case VIDIOC_S_MPEGCOMP: if (NULL == params) { /* apply settings and start encoder */ @@ -559,7 +565,7 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) break; case VIDIOC_G_FMT: { - struct v4l2_format *f = arg; + struct v4l2_format *f = arg; if (h->video_format == SAA6752HS_VF_UNKNOWN) h->video_format = SAA6752HS_VF_D1; @@ -576,6 +582,9 @@ saa6752hs_command(struct i2c_client *client, unsigned int cmd, void *arg) saa6752hs_set_subsampling(client, f); break; } + case VIDIOC_S_STD: + h->standard = *((v4l2_std_id *) arg); + break; default: /* nothing */ break; diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c new file mode 100644 index 000000000000..4f3c42354329 --- /dev/null +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -0,0 +1,1047 @@ +/* + * SAA713x ALSA support for V4L + * + * + * Caveats: + * - Volume doesn't work (it's always at max) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <sound/driver.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <linux/wait.h> +#include <linux/moduleparam.h> +#include <linux/module.h> +#include <sound/core.h> +#include <sound/control.h> +#include <sound/pcm.h> +#include <sound/initval.h> + +#include "saa7134.h" +#include "saa7134-reg.h" + +static unsigned int debug = 0; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug,"enable debug messages [alsa]"); + +/* + * Configuration macros + */ + +/* defaults */ +#define MIXER_ADDR_TVTUNER 0 +#define MIXER_ADDR_LINE1 1 +#define MIXER_ADDR_LINE2 2 +#define MIXER_ADDR_LAST 2 + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ +static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0}; + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for SAA7134 capture interface(s)."); + +#define dprintk(fmt, arg...) if (debug) \ + printk(KERN_DEBUG "%s/alsa: " fmt, dev->name , ## arg) + +/* + * Main chip structure + */ +typedef struct snd_card_saa7134 { + snd_card_t *card; + spinlock_t mixer_lock; + int mixer_volume[MIXER_ADDR_LAST+1][2]; + int capture_source[MIXER_ADDR_LAST+1][2]; + struct pci_dev *pci; + struct saa7134_dev *saadev; + + unsigned long iobase; + int irq; + + spinlock_t lock; +} snd_card_saa7134_t; + + + +/* + * PCM structure + */ + +typedef struct snd_card_saa7134_pcm { + struct saa7134_dev *saadev; + + spinlock_t lock; + unsigned int pcm_size; /* buffer size */ + unsigned int pcm_count; /* bytes per period */ + unsigned int pcm_bps; /* bytes per second */ + snd_pcm_substream_t *substream; +} snd_card_saa7134_pcm_t; + +static snd_card_t *snd_saa7134_cards[SNDRV_CARDS]; + + +/* + * saa7134 DMA audio stop + * + * Called when the capture device is released or the buffer overflows + * + * - Copied verbatim from saa7134-oss's dsp_dma_stop. Can be dropped + * if we just share dsp_dma_stop and use it here + * + */ + +static void saa7134_dma_stop(struct saa7134_dev *dev) + +{ + dev->dmasound.dma_blk = -1; + dev->dmasound.dma_running = 0; + saa7134_set_dmabits(dev); +} + +/* + * saa7134 DMA audio start + * + * Called when preparing the capture device for use + * + * - Copied verbatim from saa7134-oss's dsp_dma_start. Can be dropped + * if we just share dsp_dma_start and use it here + * + */ + +static void saa7134_dma_start(struct saa7134_dev *dev) +{ + dev->dmasound.dma_blk = 0; + dev->dmasound.dma_running = 1; + saa7134_set_dmabits(dev); +} + +/* + * saa7134 audio DMA IRQ handler + * + * Called whenever we get an SAA7134_IRQ_REPORT_DONE_RA3 interrupt + * Handles shifting between the 2 buffers, manages the read counters, + * and notifies ALSA when periods elapse + * + * - Mostly copied from saa7134-oss's saa7134_irq_oss_done. + * + */ + +void saa7134_irq_alsa_done(struct saa7134_dev *dev, unsigned long status) +{ + int next_blk, reg = 0; + + spin_lock(&dev->slock); + if (UNSET == dev->dmasound.dma_blk) { + dprintk("irq: recording stopped\n"); + goto done; + } + if (0 != (status & 0x0f000000)) + dprintk("irq: lost %ld\n", (status >> 24) & 0x0f); + if (0 == (status & 0x10000000)) { + /* odd */ + if (0 == (dev->dmasound.dma_blk & 0x01)) + reg = SAA7134_RS_BA1(6); + } else { + /* even */ + if (1 == (dev->dmasound.dma_blk & 0x01)) + reg = SAA7134_RS_BA2(6); + } + if (0 == reg) { + dprintk("irq: field oops [%s]\n", + (status & 0x10000000) ? "even" : "odd"); + goto done; + } + + if (dev->dmasound.read_count >= dev->dmasound.blksize * (dev->dmasound.blocks-2)) { + dprintk("irq: overrun [full=%d/%d] - Blocks in %d\n",dev->dmasound.read_count, + dev->dmasound.bufsize, dev->dmasound.blocks); + snd_pcm_stop(dev->dmasound.substream,SNDRV_PCM_STATE_XRUN); + saa7134_dma_stop(dev); + goto done; + } + + /* next block addr */ + next_blk = (dev->dmasound.dma_blk + 2) % dev->dmasound.blocks; + saa_writel(reg,next_blk * dev->dmasound.blksize); + if (debug > 2) + dprintk("irq: ok, %s, next_blk=%d, addr=%x, blocks=%u, size=%u, read=%u\n", + (status & 0x10000000) ? "even" : "odd ", next_blk, + next_blk * dev->dmasound.blksize, dev->dmasound.blocks, dev->dmasound.blksize, dev->dmasound.read_count); + + /* update status & wake waiting readers */ + dev->dmasound.dma_blk = (dev->dmasound.dma_blk + 1) % dev->dmasound.blocks; + dev->dmasound.read_count += dev->dmasound.blksize; + + dev->dmasound.recording_on = reg; + + if (dev->dmasound.read_count >= snd_pcm_lib_period_bytes(dev->dmasound.substream)) { + spin_unlock(&dev->slock); + snd_pcm_period_elapsed(dev->dmasound.substream); + spin_lock(&dev->slock); + } + done: + spin_unlock(&dev->slock); + +} + +/* + * IRQ request handler + * + * Runs along with saa7134's IRQ handler, discards anything that isn't + * DMA sound + * + */ + +static irqreturn_t saa7134_alsa_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct saa7134_dev *dev = (struct saa7134_dev*) dev_id; + unsigned long report, status; + int loop, handled = 0; + + for (loop = 0; loop < 10; loop++) { + report = saa_readl(SAA7134_IRQ_REPORT); + status = saa_readl(SAA7134_IRQ_STATUS); + + if (report & SAA7134_IRQ_REPORT_DONE_RA3) { + handled = 1; + saa_writel(SAA7134_IRQ_REPORT,report); + saa7134_irq_alsa_done(dev, status); + } else { + goto out; + } + } + + if (loop == 10) { + dprintk("error! looping IRQ!"); + } + +out: + return IRQ_RETVAL(handled); +} + +/* + * ALSA capture trigger + * + * - One of the ALSA capture callbacks. + * + * Called whenever a capture is started or stopped. Must be defined, + * but there's nothing we want to do here + * + */ + +static int snd_card_saa7134_capture_trigger(snd_pcm_substream_t * substream, + int cmd) +{ + snd_pcm_runtime_t *runtime = substream->runtime; + snd_card_saa7134_pcm_t *saapcm = runtime->private_data; + struct saa7134_dev *dev=saapcm->saadev; + int err = 0; + + spin_lock_irq(&dev->slock); + if (cmd == SNDRV_PCM_TRIGGER_START) { + /* start dma */ + saa7134_dma_start(dev); + } else if (cmd == SNDRV_PCM_TRIGGER_STOP) { + /* stop dma */ + saa7134_dma_stop(dev); + } else { + err = -EINVAL; + } + spin_unlock_irq(&dev->slock); + + return err; +} + +/* + * DMA buffer config + * + * Sets the values that will later be used as the size of the buffer, + * size of the fragments, and total number of fragments. + * Must be called during the preparation stage, before memory is + * allocated + * + * - Copied verbatim from saa7134-oss. Can be dropped + * if we just share dsp_buffer_conf from OSS. + */ + +static int dsp_buffer_conf(struct saa7134_dev *dev, int blksize, int blocks) +{ + if (blksize < 0x100) + blksize = 0x100; + if (blksize > 0x10000) + blksize = 0x10000; + + if (blocks < 2) + blocks = 2; + if ((blksize * blocks) > 1024*1024) + blocks = 1024*1024 / blksize; + + dev->dmasound.blocks = blocks; + dev->dmasound.blksize = blksize; + dev->dmasound.bufsize = blksize * blocks; + + dprintk("buffer config: %d blocks / %d bytes, %d kB total\n", + blocks,blksize,blksize * blocks / 1024); + return 0; +} + +/* + * DMA buffer initialization + * + * Uses V4L functions to initialize the DMA. Shouldn't be necessary in + * ALSA, but I was unable to use ALSA's own DMA, and had to force the + * usage of V4L's + * + * - Copied verbatim from saa7134-oss. Can be dropped + * if we just share dsp_buffer_init from OSS. + */ + +static int dsp_buffer_init(struct saa7134_dev *dev) +{ + int err; + + if (!dev->dmasound.bufsize) + BUG(); + videobuf_dma_init(&dev->dmasound.dma); + err = videobuf_dma_init_kernel(&dev->dmasound.dma, PCI_DMA_FROMDEVICE, + (dev->dmasound.bufsize + PAGE_SIZE) >> PAGE_SHIFT); + if (0 != err) + return err; + return 0; +} + +/* + * ALSA PCM preparation + * + * - One of the ALSA capture callbacks. + * + * Called right after the capture device is opened, this function configures + * the buffer using the previously defined functions, allocates the memory, + * sets up the hardware registers, and then starts the DMA. When this function + * returns, the audio should be flowing. + * + */ + +static int snd_card_saa7134_capture_prepare(snd_pcm_substream_t * substream) +{ + snd_pcm_runtime_t *runtime = substream->runtime; + int err, bswap, sign; + u32 fmt, control; + snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); + struct saa7134_dev *dev; + snd_card_saa7134_pcm_t *saapcm = runtime->private_data; + unsigned int bps; + unsigned long size; + unsigned count; + + size = snd_pcm_lib_buffer_bytes(substream); + count = snd_pcm_lib_period_bytes(substream); + + saapcm->saadev->dmasound.substream = substream; + bps = runtime->rate * runtime->channels; + bps *= snd_pcm_format_width(runtime->format); + bps /= 8; + if (bps <= 0) + return -EINVAL; + saapcm->pcm_bps = bps; + saapcm->pcm_size = snd_pcm_lib_buffer_bytes(substream); + saapcm->pcm_count = snd_pcm_lib_period_bytes(substream); + + + dev=saa7134->saadev; + + dsp_buffer_conf(dev,saapcm->pcm_count,(saapcm->pcm_size/saapcm->pcm_count)); + + err = dsp_buffer_init(dev); + if (0 != err) + goto fail2; + + /* prepare buffer */ + if (0 != (err = videobuf_dma_pci_map(dev->pci,&dev->dmasound.dma))) + return err; + if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->dmasound.pt))) + goto fail1; + if (0 != (err = saa7134_pgtable_build(dev->pci,&dev->dmasound.pt, + dev->dmasound.dma.sglist, + dev->dmasound.dma.sglen, + 0))) + goto fail2; + + + + switch (runtime->format) { + case SNDRV_PCM_FORMAT_U8: + case SNDRV_PCM_FORMAT_S8: + fmt = 0x00; + break; + case SNDRV_PCM_FORMAT_U16_LE: + case SNDRV_PCM_FORMAT_U16_BE: + case SNDRV_PCM_FORMAT_S16_LE: + case SNDRV_PCM_FORMAT_S16_BE: + fmt = 0x01; + break; + default: + err = -EINVAL; + return 1; + } + + switch (runtime->format) { + case SNDRV_PCM_FORMAT_S8: + case SNDRV_PCM_FORMAT_S16_LE: + case SNDRV_PCM_FORMAT_S16_BE: + sign = 1; + break; + default: + sign = 0; + break; + } + + switch (runtime->format) { + case SNDRV_PCM_FORMAT_U16_BE: + case SNDRV_PCM_FORMAT_S16_BE: + bswap = 1; break; + default: + bswap = 0; break; + } + + switch (dev->pci->device) { + case PCI_DEVICE_ID_PHILIPS_SAA7134: + if (1 == runtime->channels) + fmt |= (1 << 3); + if (2 == runtime->channels) + fmt |= (3 << 3); + if (sign) + fmt |= 0x04; + + fmt |= (MIXER_ADDR_TVTUNER == dev->dmasound.input) ? 0xc0 : 0x80; + saa_writeb(SAA7134_NUM_SAMPLES0, ((dev->dmasound.blksize - 1) & 0x0000ff)); + saa_writeb(SAA7134_NUM_SAMPLES1, ((dev->dmasound.blksize - 1) & 0x00ff00) >> 8); + saa_writeb(SAA7134_NUM_SAMPLES2, ((dev->dmasound.blksize - 1) & 0xff0000) >> 16); + saa_writeb(SAA7134_AUDIO_FORMAT_CTRL, fmt); + + break; + case PCI_DEVICE_ID_PHILIPS_SAA7133: + case PCI_DEVICE_ID_PHILIPS_SAA7135: + if (1 == runtime->channels) + fmt |= (1 << 4); + if (2 == runtime->channels) + fmt |= (2 << 4); + if (!sign) + fmt |= 0x04; + saa_writel(SAA7133_NUM_SAMPLES, dev->dmasound.blksize -1); + saa_writel(SAA7133_AUDIO_CHANNEL, 0x543210 | (fmt << 24)); + //saa_writel(SAA7133_AUDIO_CHANNEL, 0x543210); + break; + } + + dprintk("rec_start: afmt=%d ch=%d => fmt=0x%x swap=%c\n", + runtime->format, runtime->channels, fmt, + bswap ? 'b' : '-'); + /* dma: setup channel 6 (= AUDIO) */ + control = SAA7134_RS_CONTROL_BURST_16 | + SAA7134_RS_CONTROL_ME | + (dev->dmasound.pt.dma >> 12); + if (bswap) + control |= SAA7134_RS_CONTROL_BSWAP; + + /* I should be able to use runtime->dma_addr in the control + byte, but it doesn't work. So I allocate the DMA using the + V4L functions, and force ALSA to use that as the DMA area */ + + runtime->dma_area = dev->dmasound.dma.vmalloc; + + saa_writel(SAA7134_RS_BA1(6),0); + saa_writel(SAA7134_RS_BA2(6),dev->dmasound.blksize); + saa_writel(SAA7134_RS_PITCH(6),0); + saa_writel(SAA7134_RS_CONTROL(6),control); + + dev->dmasound.rate = runtime->rate; + + return 0; + fail2: + saa7134_pgtable_free(dev->pci,&dev->dmasound.pt); + fail1: + videobuf_dma_pci_unmap(dev->pci,&dev->dmasound.dma); + return err; + + +} + +/* + * ALSA pointer fetching + * + * - One of the ALSA capture callbacks. + * + * Called whenever a period elapses, it must return the current hardware + * position of the buffer. + * Also resets the read counter used to prevent overruns + * + */ + +static snd_pcm_uframes_t snd_card_saa7134_capture_pointer(snd_pcm_substream_t * substream) +{ + snd_pcm_runtime_t *runtime = substream->runtime; + snd_card_saa7134_pcm_t *saapcm = runtime->private_data; + struct saa7134_dev *dev=saapcm->saadev; + + + + if (dev->dmasound.read_count) { + dev->dmasound.read_count -= snd_pcm_lib_period_bytes(substream); + dev->dmasound.read_offset += snd_pcm_lib_period_bytes(substream); + if (dev->dmasound.read_offset == dev->dmasound.bufsize) + dev->dmasound.read_offset = 0; + } + + return bytes_to_frames(runtime, dev->dmasound.read_offset); +} + +/* + * ALSA hardware capabilities definition + */ + +static snd_pcm_hardware_t snd_card_saa7134_capture = +{ + .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID), + .formats = SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S16_BE | \ + SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_U8 | \ + SNDRV_PCM_FMTBIT_U16_LE | \ + SNDRV_PCM_FMTBIT_U16_BE, + .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000, + .rate_min = 32000, + .rate_max = 48000, + .channels_min = 1, + .channels_max = 2, + .buffer_bytes_max = (256*1024), + .period_bytes_min = 64, + .period_bytes_max = (256*1024), + .periods_min = 2, + .periods_max = 1024, +}; + +static void snd_card_saa7134_runtime_free(snd_pcm_runtime_t *runtime) +{ + snd_card_saa7134_pcm_t *saapcm = runtime->private_data; + + kfree(saapcm); +} + + +/* + * ALSA hardware params + * + * - One of the ALSA capture callbacks. + * + * Called on initialization, right before the PCM preparation + * Usually used in ALSA to allocate the DMA, but since we don't use the + * ALSA DMA it does nothing + * + */ + +static int snd_card_saa7134_hw_params(snd_pcm_substream_t * substream, + snd_pcm_hw_params_t * hw_params) +{ + + return 0; + + +} + +/* + * ALSA hardware release + * + * - One of the ALSA capture callbacks. + * + * Called after closing the device, but before snd_card_saa7134_capture_close + * Usually used in ALSA to free the DMA, but since we don't use the + * ALSA DMA I'm almost sure this isn't necessary. + * + */ + +static int snd_card_saa7134_hw_free(snd_pcm_substream_t * substream) +{ + return 0; +} + +/* + * DMA buffer release + * + * Called after closing the device, during snd_card_saa7134_capture_close + * + */ + +static int dsp_buffer_free(struct saa7134_dev *dev) +{ + if (!dev->dmasound.blksize) + BUG(); + + videobuf_dma_free(&dev->dmasound.dma); + + dev->dmasound.blocks = 0; + dev->dmasound.blksize = 0; + dev->dmasound.bufsize = 0; + + return 0; +} + +/* + * ALSA capture finish + * + * - One of the ALSA capture callbacks. + * + * Called after closing the device. It stops the DMA audio and releases + * the buffers + * + */ + +static int snd_card_saa7134_capture_close(snd_pcm_substream_t * substream) +{ + snd_card_saa7134_t *chip = snd_pcm_substream_chip(substream); + struct saa7134_dev *dev = chip->saadev; + + /* unlock buffer */ + saa7134_pgtable_free(dev->pci,&dev->dmasound.pt); + videobuf_dma_pci_unmap(dev->pci,&dev->dmasound.dma); + + dsp_buffer_free(dev); + return 0; +} + +/* + * ALSA capture start + * + * - One of the ALSA capture callbacks. + * + * Called when opening the device. It creates and populates the PCM + * structure + * + */ + +static int snd_card_saa7134_capture_open(snd_pcm_substream_t * substream) +{ + snd_pcm_runtime_t *runtime = substream->runtime; + snd_card_saa7134_pcm_t *saapcm; + snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); + struct saa7134_dev *dev = saa7134->saadev; + int err; + + down(&dev->dmasound.lock); + + dev->dmasound.afmt = SNDRV_PCM_FORMAT_U8; + dev->dmasound.channels = 2; + dev->dmasound.read_count = 0; + dev->dmasound.read_offset = 0; + + up(&dev->dmasound.lock); + + saapcm = kzalloc(sizeof(*saapcm), GFP_KERNEL); + if (saapcm == NULL) + return -ENOMEM; + saapcm->saadev=saa7134->saadev; + + spin_lock_init(&saapcm->lock); + + saapcm->substream = substream; + runtime->private_data = saapcm; + runtime->private_free = snd_card_saa7134_runtime_free; + runtime->hw = snd_card_saa7134_capture; + + if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0) + return err; + + return 0; +} + +/* + * ALSA capture callbacks definition + */ + +static snd_pcm_ops_t snd_card_saa7134_capture_ops = { + .open = snd_card_saa7134_capture_open, + .close = snd_card_saa7134_capture_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_card_saa7134_hw_params, + .hw_free = snd_card_saa7134_hw_free, + .prepare = snd_card_saa7134_capture_prepare, + .trigger = snd_card_saa7134_capture_trigger, + .pointer = snd_card_saa7134_capture_pointer, +}; + +/* + * ALSA PCM setup + * + * Called when initializing the board. Sets up the name and hooks up + * the callbacks + * + */ + +static int snd_card_saa7134_pcm(snd_card_saa7134_t *saa7134, int device) +{ + snd_pcm_t *pcm; + int err; + + if ((err = snd_pcm_new(saa7134->card, "SAA7134 PCM", device, 0, 1, &pcm)) < 0) + return err; + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_card_saa7134_capture_ops); + pcm->private_data = saa7134; + pcm->info_flags = 0; + strcpy(pcm->name, "SAA7134 PCM"); + return 0; +} + +#define SAA713x_VOLUME(xname, xindex, addr) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ + .info = snd_saa7134_volume_info, \ + .get = snd_saa7134_volume_get, .put = snd_saa7134_volume_put, \ + .private_value = addr } + +static int snd_saa7134_volume_info(snd_kcontrol_t * kcontrol, snd_ctl_elem_info_t * uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 20; + return 0; +} + +static int snd_saa7134_volume_get(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol) +{ + snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); + int addr = kcontrol->private_value; + + ucontrol->value.integer.value[0] = chip->mixer_volume[addr][0]; + ucontrol->value.integer.value[1] = chip->mixer_volume[addr][1]; + return 0; +} + +static int snd_saa7134_volume_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol) +{ + snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); + unsigned long flags; + int change, addr = kcontrol->private_value; + int left, right; + + left = ucontrol->value.integer.value[0]; + if (left < 0) + left = 0; + if (left > 20) + left = 20; + right = ucontrol->value.integer.value[1]; + if (right < 0) + right = 0; + if (right > 20) + right = 20; + spin_lock_irqsave(&chip->mixer_lock, flags); + change = chip->mixer_volume[addr][0] != left || + chip->mixer_volume[addr][1] != right; + chip->mixer_volume[addr][0] = left; + chip->mixer_volume[addr][1] = right; + spin_unlock_irqrestore(&chip->mixer_lock, flags); + return change; +} + +#define SAA713x_CAPSRC(xname, xindex, addr) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ + .info = snd_saa7134_capsrc_info, \ + .get = snd_saa7134_capsrc_get, .put = snd_saa7134_capsrc_put, \ + .private_value = addr } + +static int snd_saa7134_capsrc_info(snd_kcontrol_t * kcontrol, snd_ctl_elem_info_t * uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} + +static int snd_saa7134_capsrc_get(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol) +{ + snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); + unsigned long flags; + int addr = kcontrol->private_value; + + spin_lock_irqsave(&chip->mixer_lock, flags); + ucontrol->value.integer.value[0] = chip->capture_source[addr][0]; + ucontrol->value.integer.value[1] = chip->capture_source[addr][1]; + spin_unlock_irqrestore(&chip->mixer_lock, flags); + return 0; +} + +static int snd_saa7134_capsrc_put(snd_kcontrol_t * kcontrol, snd_ctl_elem_value_t * ucontrol) +{ + snd_card_saa7134_t *chip = snd_kcontrol_chip(kcontrol); + unsigned long flags; + int change, addr = kcontrol->private_value; + int left, right; + u32 anabar, xbarin; + int analog_io, rate; + struct saa7134_dev *dev; + + dev = chip->saadev; + + left = ucontrol->value.integer.value[0] & 1; + right = ucontrol->value.integer.value[1] & 1; + spin_lock_irqsave(&chip->mixer_lock, flags); + + change = chip->capture_source[addr][0] != left || + chip->capture_source[addr][1] != right; + chip->capture_source[addr][0] = left; + chip->capture_source[addr][1] = right; + dev->dmasound.input=addr; + spin_unlock_irqrestore(&chip->mixer_lock, flags); + + + if (change) { + switch (dev->pci->device) { + + case PCI_DEVICE_ID_PHILIPS_SAA7134: + switch (addr) { + case MIXER_ADDR_TVTUNER: + saa_andorb(SAA7134_AUDIO_FORMAT_CTRL, 0xc0, 0xc0); + saa_andorb(SAA7134_SIF_SAMPLE_FREQ, 0x03, 0x00); + break; + case MIXER_ADDR_LINE1: + case MIXER_ADDR_LINE2: + analog_io = (MIXER_ADDR_LINE1 == addr) ? 0x00 : 0x08; + rate = (32000 == dev->dmasound.rate) ? 0x01 : 0x03; + saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x08, analog_io); + saa_andorb(SAA7134_AUDIO_FORMAT_CTRL, 0xc0, 0x80); + saa_andorb(SAA7134_SIF_SAMPLE_FREQ, 0x03, rate); + break; + } + + break; + case PCI_DEVICE_ID_PHILIPS_SAA7133: + case PCI_DEVICE_ID_PHILIPS_SAA7135: + xbarin = 0x03; // adc + anabar = 0; + switch (addr) { + case MIXER_ADDR_TVTUNER: + xbarin = 0; // Demodulator + anabar = 2; // DACs + break; + case MIXER_ADDR_LINE1: + anabar = 0; // aux1, aux1 + break; + case MIXER_ADDR_LINE2: + anabar = 9; // aux2, aux2 + break; + } + + /* output xbar always main channel */ + saa_dsp_writel(dev, SAA7133_DIGITAL_OUTPUT_SEL1, 0xbbbb10); + + if (left || right) { // We've got data, turn the input on + saa_dsp_writel(dev, SAA7133_DIGITAL_INPUT_XBAR1, xbarin); + saa_writel(SAA7133_ANALOG_IO_SELECT, anabar); + } else { + saa_dsp_writel(dev, SAA7133_DIGITAL_INPUT_XBAR1, 0); + saa_writel(SAA7133_ANALOG_IO_SELECT, 0); + } + break; + } + } + + return change; +} + +static snd_kcontrol_new_t snd_saa7134_controls[] = { +SAA713x_VOLUME("Video Volume", 0, MIXER_ADDR_TVTUNER), +SAA713x_CAPSRC("Video Capture Switch", 0, MIXER_ADDR_TVTUNER), +SAA713x_VOLUME("Line Volume", 1, MIXER_ADDR_LINE1), +SAA713x_CAPSRC("Line Capture Switch", 1, MIXER_ADDR_LINE1), +SAA713x_VOLUME("Line Volume", 2, MIXER_ADDR_LINE2), +SAA713x_CAPSRC("Line Capture Switch", 2, MIXER_ADDR_LINE2), +}; + +/* + * ALSA mixer setup + * + * Called when initializing the board. Sets up the name and hooks up + * the callbacks + * + */ + +static int snd_card_saa7134_new_mixer(snd_card_saa7134_t * chip) +{ + snd_card_t *card = chip->card; + unsigned int idx; + int err; + + snd_assert(chip != NULL, return -EINVAL); + strcpy(card->mixername, "SAA7134 Mixer"); + + for (idx = 0; idx < ARRAY_SIZE(snd_saa7134_controls); idx++) { + if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_saa7134_controls[idx], chip))) < 0) + return err; + } + return 0; +} + +static int snd_saa7134_free(snd_card_saa7134_t *chip) +{ + return 0; +} + +static int snd_saa7134_dev_free(snd_device_t *device) +{ + snd_card_saa7134_t *chip = device->device_data; + return snd_saa7134_free(chip); +} + +/* + * ALSA initialization + * + * Called by saa7134-core, it creates the basic structures and registers + * the ALSA devices + * + */ + +int alsa_card_saa7134_create (struct saa7134_dev *saadev) +{ + static int dev; + + snd_card_t *card; + snd_card_saa7134_t *chip; + int err; + static snd_device_ops_t ops = { + .dev_free = snd_saa7134_dev_free, + }; + + + if (dev >= SNDRV_CARDS) + return -ENODEV; + if (!enable[dev]) + return -ENODEV; + + card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); + + if (card == NULL) + return -ENOMEM; + + strcpy(card->driver, "SAA7134"); + + /* Card "creation" */ + + chip = kcalloc(1, sizeof(*chip), GFP_KERNEL); + if (chip == NULL) { + return -ENOMEM; + } + + spin_lock_init(&chip->lock); + spin_lock_init(&chip->mixer_lock); + + chip->saadev = saadev; + + chip->card = card; + + chip->pci = saadev->pci; + chip->irq = saadev->pci->irq; + chip->iobase = pci_resource_start(saadev->pci, 0); + + err = request_irq(saadev->pci->irq, saa7134_alsa_irq, + SA_SHIRQ | SA_INTERRUPT, saadev->name, saadev); + + if (err < 0) { + printk(KERN_ERR "%s: can't get IRQ %d for ALSA\n", + saadev->name, saadev->pci->irq); + goto __nodev; + } + + if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) { + goto __nodev; + } + + if ((err = snd_card_saa7134_new_mixer(chip)) < 0) + goto __nodev; + + if ((err = snd_card_saa7134_pcm(chip, 0)) < 0) + goto __nodev; + + snd_card_set_dev(card, &chip->pci->dev); + + /* End of "creation" */ + + strcpy(card->shortname, "SAA7134"); + sprintf(card->longname, "%s at 0x%lx irq %d", + chip->saadev->name, chip->iobase, chip->irq); + + if ((err = snd_card_register(card)) == 0) { + snd_saa7134_cards[dev] = card; + return 0; + } + +__nodev: + snd_card_free(card); + kfree(chip); + return err; +} + +/* + * Module initializer + * + * Loops through present saa7134 cards, and assigns an ALSA device + * to each one + * + */ + +static int saa7134_alsa_init(void) +{ + struct saa7134_dev *saadev = NULL; + struct list_head *list; + + printk(KERN_INFO "saa7134 ALSA driver for DMA sound loaded\n"); + + list_for_each(list,&saa7134_devlist) { + saadev = list_entry(list, struct saa7134_dev, devlist); + alsa_card_saa7134_create(saadev); + } + + if (saadev == NULL) + printk(KERN_INFO "saa7134 ALSA: no saa7134 cards found\n"); + + return 0; + +} + +/* + * Module destructor + */ + +void saa7134_alsa_exit(void) +{ + int idx; + + for (idx = 0; idx < SNDRV_CARDS; idx++) { + snd_card_free(snd_saa7134_cards[idx]); + } + + printk(KERN_INFO "saa7134 ALSA driver for DMA sound unloaded\n"); + + return; +} + +module_init(saa7134_alsa_init); +module_exit(saa7134_alsa_exit); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ricardo Cerqueira"); diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index acc7a4335e23..663d03e5bc67 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -191,10 +191,14 @@ struct saa7134_board saa7134_boards[] = { .amux = TV, .tv = 1, },{ - .name = name_comp1, + .name = name_comp1, /* Composite signal on S-Video input */ .vmux = 0, .amux = LINE2, },{ + .name = name_comp2, /* Composite input */ + .vmux = 3, + .amux = LINE2, + },{ .name = name_svideo, .vmux = 8, .amux = LINE2, @@ -2109,8 +2113,423 @@ struct saa7134_board saa7134_boards[] = { .gpio = 0x01, }, }, -}; + [SAA7134_BOARD_BEHOLD_409FM] = { + /* <http://tuner.beholder.ru>, Sergey <skiv@orel.ru> */ + .name = "Beholder BeholdTV 409 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_GOTVIEW_7135] = { + /* Mike Baikov <mike@baikov.com> */ + /* Andrey Cvetcov <ays14@yandex.ru> */ + .name = "GoTView 7135 PCI", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0x00200003, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + .gpio = 0x00200003, + },{ + .name = name_tv_mono, + .vmux = 1, + .amux = LINE2, + .gpio = 0x00200003, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + .gpio = 0x00200003, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0x00200003, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0x00200003, + }, + .mute = { + .name = name_mute, + .amux = TV, + .gpio = 0x00200003, + }, + }, + [SAA7134_BOARD_PHILIPS_EUROPA] = { + .name = "Philips EUROPA V3 reference design", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TD1316, + .radio_type = UNSET, + .tuner_addr = 0x61, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_VIDEOMATE_DVBT_300] = { + .name = "Compro Videomate DVB-T300", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TD1316, + .radio_type = UNSET, + .tuner_addr = 0x61, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_VIDEOMATE_DVBT_200] = { + .name = "Compro Videomate DVB-T200", + .tuner_type = TUNER_ABSENT, + .audio_clock = 0x00187de7, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_comp1, + .vmux = 0, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_RTD_VFG7350] = { + .name = "RTD Embedded Technologies VFG7350", + .audio_clock = 0x00200000, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = "Composite 0", + .vmux = 0, + .amux = LINE1, + },{ + .name = "Composite 1", + .vmux = 1, + .amux = LINE2, + },{ + .name = "Composite 2", + .vmux = 2, + .amux = LINE1, + },{ + .name = "Composite 3", + .vmux = 3, + .amux = LINE2, + },{ + .name = "S-Video 0", + .vmux = 8, + .amux = LINE1, + },{ + .name = "S-Video 1", + .vmux = 9, + .amux = LINE2, + }}, + .mpeg = SAA7134_MPEG_EMPRESS, + .video_out = CCIR656, + .vid_port_opts = ( SET_T_CODE_POLARITY_NON_INVERTED | + SET_CLOCK_NOT_DELAYED | + SET_CLOCK_INVERTED | + SET_VSYNC_OFF ), + }, + [SAA7134_BOARD_RTD_VFG7330] = { + .name = "RTD Embedded Technologies VFG7330", + .audio_clock = 0x00200000, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = "Composite 0", + .vmux = 0, + .amux = LINE1, + },{ + .name = "Composite 1", + .vmux = 1, + .amux = LINE2, + },{ + .name = "Composite 2", + .vmux = 2, + .amux = LINE1, + },{ + .name = "Composite 3", + .vmux = 3, + .amux = LINE2, + },{ + .name = "S-Video 0", + .vmux = 8, + .amux = LINE1, + },{ + .name = "S-Video 1", + .vmux = 9, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_FLYTVPLATINUM_MINI2] = { + .name = "LifeView FlyTV Platinum Mini2", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, /* Composite signal on S-Video input */ + .vmux = 0, + .amux = LINE2, + },{ + .name = name_comp2, /* Composite input */ + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180] = { + /* Michael Krufky <mkrufky@m1k.net> + * Uses Alps Electric TDHU2, containing NXT2004 ATSC Decoder + * AFAIK, there is no analog demod, thus, + * no support for analog television. + */ + .name = "AVerMedia AVerTVHD MCE A180", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_ABSENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, + [SAA7134_BOARD_MONSTERTV_MOBILE] = { + .name = "SKNet MonsterTV Mobile", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 6, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_PINNACLE_PCTV_110i] = { + .name = "Pinnacle PCTV 110i (saa7133)", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0x080200000, + .inputs = {{ + .name = name_tv, + .vmux = 4, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_ASUSTeK_P7131_DUAL] = { + .name = "ASUSTeK P7131 Dual", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 1 << 21, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + .radio = { + .name = name_radio, + .amux = TV, + .gpio = 0x0200000, + }, + }, + [SAA7134_BOARD_SEDNA_PC_TV_CARDBUS] = { + /* Paul Tom Zalac <pzalac@gmail.com> */ + /* Pavel Mihaylov <bin@bash.info> */ + .name = "Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)", + /* Sedna/MuchTV (OEM) Cardbus TV Tuner */ + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .gpiomask = 0xe880c0, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 6, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_ASUSTEK_DIGIMATRIX_TV] = { + /* "Cyril Lacoux (Yack)" <clacoux@ifeelgood.org> */ + .name = "ASUS Digimatrix TV", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_FQ1216ME, + .tda9887_conf = TDA9887_PRESENT, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_PHILIPS_TIGER] = { + .name = "Philips Tiger reference design", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + }, +}; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -2145,19 +2564,19 @@ struct pci_device_id saa7134_pci_tbl[] = { },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, - .subvendor = 0x153B, + .subvendor = 0x153b, .subdevice = 0x1142, .driver_data = SAA7134_BOARD_CINERGY400, },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, - .subvendor = 0x153B, + .subvendor = 0x153b, .subdevice = 0x1143, .driver_data = SAA7134_BOARD_CINERGY600, },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, - .subvendor = 0x153B, + .subvendor = 0x153b, .subdevice = 0x1158, .driver_data = SAA7134_BOARD_CINERGY600_MK3, },{ @@ -2193,6 +2612,18 @@ struct pci_device_id saa7134_pci_tbl[] = { },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x14c0, + .subdevice = 0x1212, /* minipci, LR1212 */ + .driver_data = SAA7134_BOARD_FLYTVPLATINUM_MINI2, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x4e42, + .subdevice = 0x0212, /* OEM minipci, LR212 */ + .driver_data = SAA7134_BOARD_FLYTVPLATINUM_MINI, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x5168, /* Animation Technologies (LifeView) */ .subdevice = 0x0214, /* Standard PCI, LR214WF */ .driver_data = SAA7134_BOARD_FLYTVPLATINUM_FM, @@ -2369,7 +2800,7 @@ struct pci_device_id saa7134_pci_tbl[] = { },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7130, - .subvendor = 0x153B, + .subvendor = 0x153b, .subdevice = 0x1152, .driver_data = SAA7134_BOARD_CINERGY200, },{ @@ -2434,13 +2865,18 @@ struct pci_device_id saa7134_pci_tbl[] = { .subvendor = 0x1421, .subdevice = 0x0350, /* PCI version */ .driver_data = SAA7134_BOARD_ADS_INSTANT_TV, - },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x1421, .subdevice = 0x0370, /* cardbus version */ .driver_data = SAA7134_BOARD_ADS_INSTANT_TV, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1421, + .subdevice = 0x1370, /* cardbus version */ + .driver_data = SAA7134_BOARD_ADS_INSTANT_TV, },{ /* Typhoon DVB-T Duo Digital/Analog Cardbus */ .vendor = PCI_VENDOR_ID_PHILIPS, @@ -2459,9 +2895,81 @@ struct pci_device_id saa7134_pci_tbl[] = { .device = PCI_DEVICE_ID_PHILIPS_SAA7134, .subvendor = 0x1043, .subdevice = 0x0210, /* mini pci PAL/SECAM version */ - .driver_data = SAA7134_BOARD_FLYTV_DIGIMATRIX, + .driver_data = SAA7134_BOARD_ASUSTEK_DIGIMATRIX_TV, },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0000, /* It shouldn't break anything, since subdevice id seems unique */ + .subdevice = 0x4091, + .driver_data = SAA7134_BOARD_BEHOLD_409FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5456, /* GoTView */ + .subdevice = 0x7135, + .driver_data = SAA7134_BOARD_GOTVIEW_7135, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0x2004, + .driver_data = SAA7134_BOARD_PHILIPS_EUROPA, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x185b, + .subdevice = 0xc900, + .driver_data = SAA7134_BOARD_VIDEOMATE_DVBT_300, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x185b, + .subdevice = 0xc901, + .driver_data = SAA7134_BOARD_VIDEOMATE_DVBT_200, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1435, + .subdevice = 0x7350, + .driver_data = SAA7134_BOARD_RTD_VFG7350, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1435, + .subdevice = 0x7330, + .driver_data = SAA7134_BOARD_RTD_VFG7330, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1461, + .subdevice = 0x1044, + .driver_data = SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1131, + .subdevice = 0x4ee9, + .driver_data = SAA7134_BOARD_MONSTERTV_MOBILE, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x11bd, + .subdevice = 0x002e, + .driver_data = SAA7134_BOARD_PINNACLE_PCTV_110i, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1043, + .subdevice = 0x4862, + .driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = PCI_VENDOR_ID_PHILIPS, + .subdevice = 0x2018, + .driver_data = SAA7134_BOARD_PHILIPS_TIGER, + },{ /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, @@ -2530,9 +3038,10 @@ int saa7134_board_init1(struct saa7134_dev *dev) switch (dev->board) { case SAA7134_BOARD_FLYVIDEO2000: case SAA7134_BOARD_FLYVIDEO3000: - dev->has_remote = 1; + dev->has_remote = SAA7134_REMOTE_GPIO; board_flyvideo(dev); break; + case SAA7134_BOARD_FLYTVPLATINUM_MINI2: case SAA7134_BOARD_FLYTVPLATINUM_FM: case SAA7134_BOARD_CINERGY400: case SAA7134_BOARD_CINERGY600: @@ -2550,10 +3059,16 @@ int saa7134_board_init1(struct saa7134_dev *dev) /* case SAA7134_BOARD_SABRENT_SBTTVFM: */ /* not finished yet */ case SAA7134_BOARD_VIDEOMATE_TV_PVR: case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII: + case SAA7134_BOARD_VIDEOMATE_DVBT_300: + case SAA7134_BOARD_VIDEOMATE_DVBT_200: case SAA7134_BOARD_MANLI_MTV001: case SAA7134_BOARD_MANLI_MTV002: + case SAA7134_BOARD_BEHOLD_409FM: case SAA7134_BOARD_AVACSSMARTTV: - dev->has_remote = 1; + case SAA7134_BOARD_GOTVIEW_7135: + case SAA7134_BOARD_KWORLD_TERMINATOR: + case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS: + dev->has_remote = SAA7134_REMOTE_GPIO; break; case SAA7134_BOARD_MD5044: printk("%s: seems there are two different versions of the MD5044\n" @@ -2565,11 +3080,14 @@ int saa7134_board_init1(struct saa7134_dev *dev) /* power-up tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000); - msleep(1); + case SAA7134_BOARD_MONSTERTV_MOBILE: + /* power-up tuner chip */ + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000004); break; case SAA7134_BOARD_FLYDVBTDUO: case SAA7134_BOARD_THYPHOON_DVBT_DUO_CARDBUS: - /* turn the fan on Hac: static for the time being */ + /* turn the fan on */ saa_writeb(SAA7134_GPIO_GPMODE3, 0x08); saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x06); break; @@ -2579,6 +3097,22 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff); msleep(1); break; + case SAA7134_BOARD_RTD_VFG7350: + + /* + * Make sure Production Test Register at offset 0x1D1 is cleared + * to take chip out of test mode. Clearing bit 4 (TST_EN_AOUT) + * prevents pin 105 from remaining low; keeping pin 105 low + * continually resets the SAA6752 chip. + */ + + saa_writeb (SAA7134_PRODUCTION_TEST_MODE, 0x00); + break; + /* i2c remotes */ + case SAA7134_BOARD_PINNACLE_PCTV_110i: + case SAA7134_BOARD_UPMOST_PURPLE_TV: + dev->has_remote = SAA7134_REMOTE_I2C; + break; } return 0; } @@ -2613,7 +3147,7 @@ int saa7134_board_init2(struct saa7134_dev *dev) saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR, &tun_setup); } break; -case SAA7134_BOARD_MD7134: + case SAA7134_BOARD_MD7134: { struct tuner_setup tun_setup; u8 subaddr; @@ -2680,6 +3214,33 @@ case SAA7134_BOARD_MD7134: saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup); } break; + case SAA7134_BOARD_PHILIPS_EUROPA: + case SAA7134_BOARD_VIDEOMATE_DVBT_300: + /* The Philips EUROPA based hybrid boards have the tuner connected through + * the channel decoder. We have to make it transparent to find it + */ + { + struct tuner_setup tun_setup; + u8 data[] = { 0x07, 0x02}; + struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + + tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; + tun_setup.type = dev->tuner_type; + tun_setup.addr = dev->tuner_addr; + + saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup); + } + break; + case SAA7134_BOARD_PHILIPS_TIGER: + case SAA7134_BOARD_ASUSTeK_P7131_DUAL: + /* this is a hybrid board, initialize to analog mode */ + { + u8 data[] = { 0x3c, 0x33, 0x68}; + struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; + i2c_transfer(&dev->i2c_adap, &msg, 1); + } + break; } return 0; } diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index e5e36f3c6250..19b88744fb31 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -57,6 +57,10 @@ static unsigned int oss = 0; module_param(oss, int, 0444); MODULE_PARM_DESC(oss,"register oss devices (default: no)"); +static unsigned int alsa = 0; +module_param(alsa, int, 0444); +MODULE_PARM_DESC(alsa,"register alsa devices (default: no)"); + static unsigned int latency = UNSET; module_param(latency, int, 0444); MODULE_PARM_DESC(latency,"pci latency timer"); @@ -190,6 +194,7 @@ void saa7134_track_gpio(struct saa7134_dev *dev, char *msg) static int need_empress; static int need_dvb; +static int need_alsa; static int pending_call(struct notifier_block *self, unsigned long state, void *module) @@ -197,10 +202,12 @@ static int pending_call(struct notifier_block *self, unsigned long state, if (module != THIS_MODULE || state != MODULE_STATE_LIVE) return NOTIFY_DONE; - if (need_empress) - request_module("saa7134-empress"); - if (need_dvb) - request_module("saa7134-dvb"); + if (need_empress) + request_module("saa7134-empress"); + if (need_dvb) + request_module("saa7134-dvb"); + if (need_alsa) + request_module("saa7134-alsa"); return NOTIFY_DONE; } @@ -275,8 +282,8 @@ unsigned long saa7134_buffer_base(struct saa7134_buf *buf) int saa7134_pgtable_alloc(struct pci_dev *pci, struct saa7134_pgtable *pt) { - __le32 *cpu; - dma_addr_t dma_addr; + __le32 *cpu; + dma_addr_t dma_addr; cpu = pci_alloc_consistent(pci, SAA7134_PGTABLE_SIZE, &dma_addr); if (NULL == cpu) @@ -436,7 +443,7 @@ int saa7134_set_dmabits(struct saa7134_dev *dev) ctrl |= SAA7134_MAIN_CTRL_TE0; irq |= SAA7134_IRQ1_INTE_RA0_1 | SAA7134_IRQ1_INTE_RA0_0; - cap = dev->video_q.curr->vb.field; + cap = dev->video_q.curr->vb.field; } /* video capture -- dma 1+2 (planar modes) */ @@ -465,7 +472,7 @@ int saa7134_set_dmabits(struct saa7134_dev *dev) } /* audio capture -- dma 3 */ - if (dev->oss.dma_running) { + if (dev->dmasound.dma_running) { ctrl |= SAA7134_MAIN_CTRL_TE6; irq |= SAA7134_IRQ1_INTE_RA3_1 | SAA7134_IRQ1_INTE_RA3_0; @@ -570,6 +577,17 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs) dev->name); goto out; } + + /* If alsa support is active and we get a sound report, exit + and let the saa7134-alsa module deal with it */ + + if ((report & SAA7134_IRQ_REPORT_DONE_RA3) && alsa) { + if (irq_debug > 1) + printk(KERN_DEBUG "%s/irq: ignoring interrupt for ALSA\n", + dev->name); + goto out; + } + handled = 1; saa_writel(SAA7134_IRQ_REPORT,report); if (irq_debug) @@ -591,13 +609,17 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs) card_has_mpeg(dev)) saa7134_irq_ts_done(dev,status); - if ((report & SAA7134_IRQ_REPORT_DONE_RA3)) - saa7134_irq_oss_done(dev,status); + if ((report & SAA7134_IRQ_REPORT_DONE_RA3)) { + if (oss) { + saa7134_irq_oss_done(dev,status); + } + } if ((report & (SAA7134_IRQ_REPORT_GPIO16 | SAA7134_IRQ_REPORT_GPIO18)) && dev->remote) saa7134_input_irq(dev); + } if (10 == loop) { @@ -636,7 +658,7 @@ static int saa7134_hwinit1(struct saa7134_dev *dev) saa_writel(SAA7134_IRQ1, 0); saa_writel(SAA7134_IRQ2, 0); - init_MUTEX(&dev->lock); + init_MUTEX(&dev->lock); spin_lock_init(&dev->slock); saa7134_track_gpio(dev,"pre-init"); @@ -646,14 +668,6 @@ static int saa7134_hwinit1(struct saa7134_dev *dev) saa7134_ts_init1(dev); saa7134_input_init1(dev); - switch (dev->pci->device) { - case PCI_DEVICE_ID_PHILIPS_SAA7134: - case PCI_DEVICE_ID_PHILIPS_SAA7133: - case PCI_DEVICE_ID_PHILIPS_SAA7135: - saa7134_oss_init1(dev); - break; - } - /* RAM FIFO config */ saa_writel(SAA7134_FIFO_SIZE, 0x08070503); saa_writel(SAA7134_THRESHOULD,0x02020202); @@ -668,6 +682,21 @@ static int saa7134_hwinit1(struct saa7134_dev *dev) SAA7134_MAIN_CTRL_ESFE | SAA7134_MAIN_CTRL_EBDAC); + /* + * Initialize OSS _after_ enabling audio clock PLL and audio processing. + * OSS initialization writes to registers via the audio DSP; these + * writes will fail unless the audio clock has been started. At worst, + * audio will not work. + */ + + switch (dev->pci->device) { + case PCI_DEVICE_ID_PHILIPS_SAA7134: + case PCI_DEVICE_ID_PHILIPS_SAA7133: + case PCI_DEVICE_ID_PHILIPS_SAA7135: + saa7134_oss_init1(dev); + break; + } + /* enable peripheral devices */ saa_writeb(SAA7134_SPECIAL_MODE, 0x01); @@ -687,7 +716,7 @@ static int saa7134_hwinit2(struct saa7134_dev *dev) saa7134_tvaudio_init2(dev); /* enable IRQ's */ - irq2_mask = + irq2_mask = SAA7134_IRQ2_INTE_DEC3 | SAA7134_IRQ2_INTE_DEC2 | SAA7134_IRQ2_INTE_DEC1 | @@ -695,10 +724,12 @@ static int saa7134_hwinit2(struct saa7134_dev *dev) SAA7134_IRQ2_INTE_PE | SAA7134_IRQ2_INTE_AR; - if (dev->has_remote) + if (dev->has_remote == SAA7134_REMOTE_GPIO) irq2_mask |= (SAA7134_IRQ2_INTE_GPIO18 | SAA7134_IRQ2_INTE_GPIO18A | SAA7134_IRQ2_INTE_GPIO16 ); + else if (dev->has_remote == SAA7134_REMOTE_I2C) + request_module("ir-kbd-i2c"); saa_writel(SAA7134_IRQ1, 0); saa_writel(SAA7134_IRQ2, irq2_mask); @@ -872,8 +903,8 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, /* print pci info */ pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &dev->pci_rev); - pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); - printk(KERN_INFO "%s: found at %s, rev: %d, irq: %d, " + pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); + printk(KERN_INFO "%s: found at %s, rev: %d, irq: %d, " "latency: %d, mmio: 0x%lx\n", dev->name, pci_name(pci_dev), dev->pci_rev, pci_dev->irq, dev->pci_lat,pci_resource_start(pci_dev,0)); @@ -897,7 +928,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf; if (UNSET != tuner[dev->nr]) dev->tuner_type = tuner[dev->nr]; - printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n", + printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n", dev->name,pci_dev->subsystem_vendor, pci_dev->subsystem_device,saa7134_boards[dev->board].name, dev->board, card[dev->nr] == dev->board ? @@ -947,14 +978,20 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, request_module("tuner"); if (dev->tda9887_conf) request_module("tda9887"); - if (card_is_empress(dev)) { + if (card_is_empress(dev)) { request_module("saa6752hs"); request_module_depend("saa7134-empress",&need_empress); } - if (card_is_dvb(dev)) + if (card_is_dvb(dev)) request_module_depend("saa7134-dvb",&need_dvb); + if (!oss && alsa) { + dprintk("Requesting ALSA module\n"); + request_module_depend("saa7134-alsa",&need_alsa); + } + + v4l2_prio_init(&dev->prio); /* register v4l devices */ @@ -993,22 +1030,22 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, case PCI_DEVICE_ID_PHILIPS_SAA7133: case PCI_DEVICE_ID_PHILIPS_SAA7135: if (oss) { - err = dev->oss.minor_dsp = + err = dev->dmasound.minor_dsp = register_sound_dsp(&saa7134_dsp_fops, dsp_nr[dev->nr]); if (err < 0) { goto fail4; } printk(KERN_INFO "%s: registered device dsp%d\n", - dev->name,dev->oss.minor_dsp >> 4); + dev->name,dev->dmasound.minor_dsp >> 4); - err = dev->oss.minor_mixer = + err = dev->dmasound.minor_mixer = register_sound_mixer(&saa7134_mixer_fops, mixer_nr[dev->nr]); if (err < 0) goto fail5; printk(KERN_INFO "%s: registered device mixer%d\n", - dev->name,dev->oss.minor_mixer >> 4); + dev->name,dev->dmasound.minor_mixer >> 4); } break; } @@ -1035,7 +1072,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, case PCI_DEVICE_ID_PHILIPS_SAA7133: case PCI_DEVICE_ID_PHILIPS_SAA7135: if (oss) - unregister_sound_dsp(dev->oss.minor_dsp); + unregister_sound_dsp(dev->dmasound.minor_dsp); break; } fail4: @@ -1055,7 +1092,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, static void __devexit saa7134_finidev(struct pci_dev *pci_dev) { - struct saa7134_dev *dev = pci_get_drvdata(pci_dev); + struct saa7134_dev *dev = pci_get_drvdata(pci_dev); struct list_head *item; struct saa7134_mpeg_ops *mops; @@ -1093,8 +1130,8 @@ static void __devexit saa7134_finidev(struct pci_dev *pci_dev) case PCI_DEVICE_ID_PHILIPS_SAA7133: case PCI_DEVICE_ID_PHILIPS_SAA7135: if (oss) { - unregister_sound_mixer(dev->oss.minor_mixer); - unregister_sound_dsp(dev->oss.minor_dsp); + unregister_sound_mixer(dev->dmasound.minor_mixer); + unregister_sound_dsp(dev->dmasound.minor_dsp); } break; } @@ -1149,10 +1186,10 @@ EXPORT_SYMBOL(saa7134_ts_unregister); /* ----------------------------------------------------------- */ static struct pci_driver saa7134_pci_driver = { - .name = "saa7134", - .id_table = saa7134_pci_tbl, - .probe = saa7134_initdev, - .remove = __devexit_p(saa7134_finidev), + .name = "saa7134", + .id_table = saa7134_pci_tbl, + .probe = saa7134_initdev, + .remove = __devexit_p(saa7134_finidev), }; static int saa7134_init(void) @@ -1188,6 +1225,13 @@ EXPORT_SYMBOL(saa7134_i2c_call_clients); EXPORT_SYMBOL(saa7134_devlist); EXPORT_SYMBOL(saa7134_boards); +/* ----------------- For ALSA -------------------------------- */ + +EXPORT_SYMBOL(saa7134_pgtable_free); +EXPORT_SYMBOL(saa7134_pgtable_build); +EXPORT_SYMBOL(saa7134_pgtable_alloc); +EXPORT_SYMBOL(saa7134_set_dmabits); + /* ----------------------------------------------------------- */ /* * Local variables: diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 639ae51a052d..e016480c3468 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -29,7 +29,6 @@ #include <linux/kthread.h> #include <linux/suspend.h> - #include "saa7134-reg.h" #include "saa7134.h" @@ -40,6 +39,10 @@ #ifdef HAVE_TDA1004X # include "tda1004x.h" #endif +#ifdef HAVE_NXT200X +# include "nxt200x.h" +# include "dvb-pll.h" +#endif MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); MODULE_LICENSE("GPL"); @@ -151,25 +154,12 @@ static struct mt352_config pinnacle_300i = { /* ------------------------------------------------------------------ */ #ifdef HAVE_TDA1004X -static int philips_tu1216_pll_init(struct dvb_frontend *fe) -{ - struct saa7134_dev *dev = fe->dvb->priv; - static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; - struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; - - /* setup PLL configuration */ - if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) - return -EIO; - msleep(1); - return 0; -} - -static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +static int philips_tda6651_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct saa7134_dev *dev = fe->dvb->priv; u8 tuner_buf[4]; - struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,.len = + struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) }; int tuner_frequency = 0; u8 band, cp, filter; @@ -242,11 +232,36 @@ static int philips_tu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_p if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) return -EIO; + msleep(1); + return 0; +} +static int philips_tda6651_pll_init(u8 addr, struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; + struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; + + /* setup PLL configuration */ + if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) + return -EIO; msleep(1); + return 0; } +/* ------------------------------------------------------------------ */ + +static int philips_tu1216_pll_60_init(struct dvb_frontend *fe) +{ + return philips_tda6651_pll_init(0x60, fe); +} + +static int philips_tu1216_pll_60_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + return philips_tda6651_pll_set(0x60, fe, params); +} + static int philips_tu1216_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name) { @@ -254,22 +269,108 @@ static int philips_tu1216_request_firmware(struct dvb_frontend *fe, return request_firmware(fw, name, &dev->pci->dev); } -static struct tda1004x_config philips_tu1216_config = { +static struct tda1004x_config philips_tu1216_60_config = { + + .demod_address = 0x8, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .pll_init = philips_tu1216_pll_60_init, + .pll_set = philips_tu1216_pll_60_set, + .pll_sleep = NULL, + .request_firmware = philips_tu1216_request_firmware, +}; + +/* ------------------------------------------------------------------ */ + +static int philips_tu1216_pll_61_init(struct dvb_frontend *fe) +{ + return philips_tda6651_pll_init(0x61, fe); +} + +static int philips_tu1216_pll_61_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + return philips_tda6651_pll_set(0x61, fe, params); +} + +static struct tda1004x_config philips_tu1216_61_config = { .demod_address = 0x8, .invert = 1, - .invert_oclk = 1, + .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_4M, .agc_config = TDA10046_AGC_DEFAULT, .if_freq = TDA10046_FREQ_3617, - .pll_init = philips_tu1216_pll_init, - .pll_set = philips_tu1216_pll_set, + .pll_init = philips_tu1216_pll_61_init, + .pll_set = philips_tu1216_pll_61_set, .pll_sleep = NULL, .request_firmware = philips_tu1216_request_firmware, }; /* ------------------------------------------------------------------ */ +static int philips_europa_pll_init(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab }; + struct i2c_msg init_msg = {.addr = 0x61,.flags = 0,.buf = msg,.len = sizeof(msg) }; + + /* setup PLL configuration */ + if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) + return -EIO; + msleep(1); + + /* switch the board to dvb mode */ + init_msg.addr = 0x43; + init_msg.len = 0x02; + msg[0] = 0x00; + msg[1] = 0x40; + if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) + return -EIO; + + return 0; +} + +static int philips_td1316_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + return philips_tda6651_pll_set(0x61, fe, params); +} + +static void philips_europa_analog(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + /* this message actually turns the tuner back to analog mode */ + static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 }; + struct i2c_msg analog_msg = {.addr = 0x61,.flags = 0,.buf = msg,.len = sizeof(msg) }; + + i2c_transfer(&dev->i2c_adap, &analog_msg, 1); + msleep(1); + + /* switch the board to analog mode */ + analog_msg.addr = 0x43; + analog_msg.len = 0x02; + msg[0] = 0x00; + msg[1] = 0x14; + i2c_transfer(&dev->i2c_adap, &analog_msg, 1); +} + +static struct tda1004x_config philips_europa_config = { + + .demod_address = 0x8, + .invert = 0, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_IFO_AUTO_POS, + .if_freq = TDA10046_FREQ_052, + .pll_init = philips_europa_pll_init, + .pll_set = philips_td1316_pll_set, + .pll_sleep = philips_europa_analog, + .request_firmware = NULL, +}; + +/* ------------------------------------------------------------------ */ static int philips_fmd1216_pll_init(struct dvb_frontend *fe) { @@ -382,7 +483,6 @@ static int philips_fmd1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_ return 0; } -#ifdef HAVE_TDA1004X static struct tda1004x_config medion_cardbus = { .demod_address = 0x08, .invert = 1, @@ -395,7 +495,6 @@ static struct tda1004x_config medion_cardbus = { .pll_sleep = philips_fmd1216_analog, .request_firmware = NULL, }; -#endif /* ------------------------------------------------------------------ */ @@ -452,7 +551,7 @@ static int philips_tda827x_pll_set(struct dvb_frontend *fe, struct dvb_frontend_ u8 tuner_buf[14]; struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf, - .len = sizeof(tuner_buf) }; + .len = sizeof(tuner_buf) }; int i, tuner_freq, if_freq; u32 N; switch (params->u.ofdm.bandwidth) { @@ -511,7 +610,7 @@ static void philips_tda827x_pll_sleep(struct dvb_frontend *fe) struct saa7134_dev *dev = fe->dvb->priv; static u8 tda827x_sleep[] = { 0x30, 0xd0}; struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tda827x_sleep, - .len = sizeof(tda827x_sleep) }; + .len = sizeof(tda827x_sleep) }; i2c_transfer(&dev->i2c_adap, &tuner_msg, 1); } @@ -527,6 +626,202 @@ static struct tda1004x_config tda827x_lifeview_config = { .pll_sleep = philips_tda827x_pll_sleep, .request_firmware = NULL, }; + +/* ------------------------------------------------------------------ */ + +struct tda827xa_data { + u32 lomax; + u8 svco; + u8 spd; + u8 scr; + u8 sbs; + u8 gc3; +}; + +static struct tda827xa_data tda827xa_dvbt[] = { + { .lomax = 56875000, .svco = 3, .spd = 4, .scr = 0, .sbs = 0, .gc3 = 1}, + { .lomax = 67250000, .svco = 0, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1}, + { .lomax = 81250000, .svco = 1, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1}, + { .lomax = 97500000, .svco = 2, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1}, + { .lomax = 113750000, .svco = 3, .spd = 3, .scr = 0, .sbs = 1, .gc3 = 1}, + { .lomax = 134500000, .svco = 0, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1}, + { .lomax = 154000000, .svco = 1, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1}, + { .lomax = 162500000, .svco = 1, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1}, + { .lomax = 183000000, .svco = 2, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1}, + { .lomax = 195000000, .svco = 2, .spd = 2, .scr = 0, .sbs = 2, .gc3 = 1}, + { .lomax = 227500000, .svco = 3, .spd = 2, .scr = 0, .sbs = 2, .gc3 = 1}, + { .lomax = 269000000, .svco = 0, .spd = 1, .scr = 0, .sbs = 2, .gc3 = 1}, + { .lomax = 290000000, .svco = 1, .spd = 1, .scr = 0, .sbs = 2, .gc3 = 1}, + { .lomax = 325000000, .svco = 1, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1}, + { .lomax = 390000000, .svco = 2, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1}, + { .lomax = 455000000, .svco = 3, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1}, + { .lomax = 520000000, .svco = 0, .spd = 0, .scr = 0, .sbs = 3, .gc3 = 1}, + { .lomax = 538000000, .svco = 0, .spd = 0, .scr = 1, .sbs = 3, .gc3 = 1}, + { .lomax = 550000000, .svco = 1, .spd = 0, .scr = 0, .sbs = 3, .gc3 = 1}, + { .lomax = 620000000, .svco = 1, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0}, + { .lomax = 650000000, .svco = 1, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0}, + { .lomax = 700000000, .svco = 2, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0}, + { .lomax = 780000000, .svco = 2, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0}, + { .lomax = 820000000, .svco = 3, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0}, + { .lomax = 870000000, .svco = 3, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0}, + { .lomax = 911000000, .svco = 3, .spd = 0, .scr = 2, .sbs = 4, .gc3 = 0}, + { .lomax = 0, .svco = 0, .spd = 0, .scr = 0, .sbs = 0, .gc3 = 0}}; + + +static int philips_tda827xa_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + struct saa7134_dev *dev = fe->dvb->priv; + u8 tuner_buf[14]; + unsigned char reg2[2]; + + struct i2c_msg msg = {.addr = addr,.flags = 0,.buf = tuner_buf}; + int i, tuner_freq, if_freq; + u32 N; + + switch (params->u.ofdm.bandwidth) { + case BANDWIDTH_6_MHZ: + if_freq = 4000000; + break; + case BANDWIDTH_7_MHZ: + if_freq = 4500000; + break; + default: /* 8 MHz or Auto */ + if_freq = 5000000; + break; + } + tuner_freq = params->frequency + if_freq; + + i = 0; + while (tda827xa_dvbt[i].lomax < tuner_freq) { + if(tda827xa_dvbt[i + 1].lomax == 0) + break; + i++; + } + + N = ((tuner_freq + 31250) / 62500) << tda827xa_dvbt[i].spd; + tuner_buf[0] = 0; // subaddress + tuner_buf[1] = N >> 8; + tuner_buf[2] = N & 0xff; + tuner_buf[3] = 0; + tuner_buf[4] = 0x16; + tuner_buf[5] = (tda827xa_dvbt[i].spd << 5) + (tda827xa_dvbt[i].svco << 3) + + tda827xa_dvbt[i].sbs; + tuner_buf[6] = 0x4b + (tda827xa_dvbt[i].gc3 << 4); + tuner_buf[7] = 0x0c; + tuner_buf[8] = 0x06; + tuner_buf[9] = 0x24; + tuner_buf[10] = 0xff; + tuner_buf[11] = 0x60; + tuner_buf[12] = 0x00; + tuner_buf[13] = 0x39; // lpsel + msg.len = 14; + if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) + return -EIO; + + msg.buf= reg2; + msg.len = 2; + reg2[0] = 0x60; + reg2[1] = 0x3c; + i2c_transfer(&dev->i2c_adap, &msg, 1); + + reg2[0] = 0xa0; + reg2[1] = 0x40; + i2c_transfer(&dev->i2c_adap, &msg, 1); + + msleep(2); + /* correct CP value */ + reg2[0] = 0x30; + reg2[1] = 0x10 + tda827xa_dvbt[i].scr; + msg.len = 2; + i2c_transfer(&dev->i2c_adap, &msg, 1); + + msleep(550); + reg2[0] = 0x50; + reg2[1] = 0x4f + (tda827xa_dvbt[i].gc3 << 4); + i2c_transfer(&dev->i2c_adap, &msg, 1); + + return 0; + +} + +static void philips_tda827xa_pll_sleep(u8 addr, struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + static u8 tda827xa_sleep[] = { 0x30, 0x90}; + struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tda827xa_sleep, + .len = sizeof(tda827xa_sleep) }; + i2c_transfer(&dev->i2c_adap, &tuner_msg, 1); + +} + +/* ------------------------------------------------------------------ */ + +static int philips_tiger_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + int ret; + struct saa7134_dev *dev = fe->dvb->priv; + static u8 tda8290_close[] = { 0x21, 0xc0}; + static u8 tda8290_open[] = { 0x21, 0x80}; + struct i2c_msg tda8290_msg = {.addr = 0x4b,.flags = 0, .len = 2}; + /* close tda8290 i2c bridge */ + tda8290_msg.buf = tda8290_close; + ret = i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1); + if (ret != 1) + return -EIO; + msleep(20); + ret = philips_tda827xa_pll_set(0x61, fe, params); + if (ret != 0) + return ret; + /* open tda8290 i2c bridge */ + tda8290_msg.buf = tda8290_open; + i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1); + return ret; +}; + +static int philips_tiger_dvb_mode(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + static u8 data[] = { 0x3c, 0x33, 0x6a}; + struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; + + if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static void philips_tiger_analog_mode(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + static u8 data[] = { 0x3c, 0x33, 0x68}; + struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; + + i2c_transfer(&dev->i2c_adap, &msg, 1); + philips_tda827xa_pll_sleep( 0x61, fe); +} + +static struct tda1004x_config philips_tiger_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .if_freq = TDA10046_FREQ_045, + .pll_init = philips_tiger_dvb_mode, + .pll_set = philips_tiger_pll_set, + .pll_sleep = philips_tiger_analog_mode, + .request_firmware = NULL, +}; + +#endif + +/* ------------------------------------------------------------------ */ + +#ifdef HAVE_NXT200X +static struct nxt200x_config avertvhda180 = { + .demod_address = 0x0a, + .pll_address = 0x61, + .pll_desc = &dvb_pll_tdhu2, +}; #endif /* ------------------------------------------------------------------ */ @@ -558,7 +853,7 @@ static int dvb_init(struct saa7134_dev *dev) &dev->i2c_adap); break; case SAA7134_BOARD_PHILIPS_TOUGH: - dev->dvb.frontend = tda10046_attach(&philips_tu1216_config, + dev->dvb.frontend = tda10046_attach(&philips_tu1216_60_config, &dev->i2c_adap); break; case SAA7134_BOARD_FLYDVBTDUO: @@ -569,6 +864,31 @@ static int dvb_init(struct saa7134_dev *dev) dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config, &dev->i2c_adap); break; + case SAA7134_BOARD_PHILIPS_EUROPA: + dev->dvb.frontend = tda10046_attach(&philips_europa_config, + &dev->i2c_adap); + break; + case SAA7134_BOARD_VIDEOMATE_DVBT_300: + dev->dvb.frontend = tda10046_attach(&philips_europa_config, + &dev->i2c_adap); + break; + case SAA7134_BOARD_VIDEOMATE_DVBT_200: + dev->dvb.frontend = tda10046_attach(&philips_tu1216_61_config, + &dev->i2c_adap); + break; + case SAA7134_BOARD_PHILIPS_TIGER: + dev->dvb.frontend = tda10046_attach(&philips_tiger_config, + &dev->i2c_adap); + break; + case SAA7134_BOARD_ASUSTeK_P7131_DUAL: + dev->dvb.frontend = tda10046_attach(&philips_tiger_config, + &dev->i2c_adap); + break; +#endif +#ifdef HAVE_NXT200X + case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: + dev->dvb.frontend = nxt200x_attach(&avertvhda180, &dev->i2c_adap); + break; #endif default: printk("%s: Huh? unknown DVB card?\n",dev->name); diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 77b627eb6483..e9ec69efb4c9 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -55,7 +55,7 @@ static void ts_reset_encoder(struct saa7134_dev* dev) saa_writeb(SAA7134_SPECIAL_MODE, 0x00); msleep(10); - saa_writeb(SAA7134_SPECIAL_MODE, 0x01); + saa_writeb(SAA7134_SPECIAL_MODE, 0x01); msleep(100); dev->empress_started = 0; } @@ -65,7 +65,7 @@ static int ts_init_encoder(struct saa7134_dev* dev) ts_reset_encoder(dev); saa7134_i2c_call_clients(dev, VIDIOC_S_MPEGCOMP, NULL); dev->empress_started = 1; - return 0; + return 0; } /* ------------------------------------------------------------------ */ @@ -169,7 +169,7 @@ static int ts_do_ioctl(struct inode *inode, struct file *file, struct v4l2_capability *cap = arg; memset(cap,0,sizeof(*cap)); - strcpy(cap->driver, "saa7134"); + strcpy(cap->driver, "saa7134"); strlcpy(cap->card, saa7134_boards[dev->board].name, sizeof(cap->card)); sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci)); diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c index 711aa8e85fac..7575043f0874 100644 --- a/drivers/media/video/saa7134/saa7134-i2c.c +++ b/drivers/media/video/saa7134/saa7134-i2c.c @@ -239,7 +239,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap, unsigned char data; int addr,rc,i,byte; - status = i2c_get_status(dev); + status = i2c_get_status(dev); if (!i2c_is_idle(status)) if (!i2c_reset(dev)) return -EIO; @@ -296,7 +296,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap, rc = -EIO; if (!i2c_is_busy_wait(dev)) goto err; - status = i2c_get_status(dev); + status = i2c_get_status(dev); if (i2c_is_error(status)) goto err; /* ensure that the bus is idle for at least one bit slot */ @@ -335,6 +335,20 @@ static int attach_inform(struct i2c_client *client) d1printk( "%s i2c attach [addr=0x%x,client=%s]\n", client->driver->name, client->addr, client->name); + /* Am I an i2c remote control? */ + + switch (client->addr) { + case 0x7a: + case 0x47: + { + struct IR_i2c *ir = i2c_get_clientdata(client); + d1printk("%s i2c IR detected (%s).\n", + client->driver->name,ir->phys); + saa7134_set_i2c_ir(dev,ir); + break; + } + } + if (!client->driver->command) return 0; @@ -348,12 +362,12 @@ static int attach_inform(struct i2c_client *client) client->driver->command(client, TUNER_SET_TYPE_ADDR, &tun_setup); } - } + } if (tuner != UNSET) { - tun_setup.type = tuner; - tun_setup.addr = saa7134_boards[dev->board].tuner_addr; + tun_setup.type = tuner; + tun_setup.addr = saa7134_boards[dev->board].tuner_addr; if ((tun_setup.addr == ADDR_UNSET)||(tun_setup.addr == client->addr)) { @@ -361,11 +375,11 @@ static int attach_inform(struct i2c_client *client) client->driver->command(client,TUNER_SET_TYPE_ADDR, &tun_setup); } - } + } client->driver->command(client, TDA9887_SET_CONFIG, &conf); - return 0; + return 0; } static struct i2c_algorithm saa7134_algo = { diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 242cb235cf92..329accda6d45 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -39,6 +39,8 @@ MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]"); #define dprintk(fmt, arg...) if (ir_debug) \ printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg) +#define i2cdprintk(fmt, arg...) if (ir_debug) \ + printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg) /* ---------------------------------------------------------------------- */ @@ -114,24 +116,24 @@ static IR_KEYTAB_TYPE cinergy_codes[IR_KEYTAB_SIZE] = { /* Alfons Geser <a.geser@cox.net> * updates from Job D. R. Borges <jobdrb@ig.com.br> */ static IR_KEYTAB_TYPE eztv_codes[IR_KEYTAB_SIZE] = { - [ 18 ] = KEY_POWER, - [ 1 ] = KEY_TV, // DVR - [ 21 ] = KEY_DVD, // DVD - [ 23 ] = KEY_AUDIO, // music - // DVR mode / DVD mode / music mode - - [ 27 ] = KEY_MUTE, // mute - [ 2 ] = KEY_LANGUAGE, // MTS/SAP / audio / autoseek - [ 30 ] = KEY_SUBTITLE, // closed captioning / subtitle / seek - [ 22 ] = KEY_ZOOM, // full screen - [ 28 ] = KEY_VIDEO, // video source / eject / delall - [ 29 ] = KEY_RESTART, // playback / angle / del - [ 47 ] = KEY_SEARCH, // scan / menu / playlist - [ 48 ] = KEY_CHANNEL, // CH surfing / bookmark / memo - - [ 49 ] = KEY_HELP, // help - [ 50 ] = KEY_MODE, // num/memo - [ 51 ] = KEY_ESC, // cancel + [ 18 ] = KEY_POWER, + [ 1 ] = KEY_TV, // DVR + [ 21 ] = KEY_DVD, // DVD + [ 23 ] = KEY_AUDIO, // music + // DVR mode / DVD mode / music mode + + [ 27 ] = KEY_MUTE, // mute + [ 2 ] = KEY_LANGUAGE, // MTS/SAP / audio / autoseek + [ 30 ] = KEY_SUBTITLE, // closed captioning / subtitle / seek + [ 22 ] = KEY_ZOOM, // full screen + [ 28 ] = KEY_VIDEO, // video source / eject / delall + [ 29 ] = KEY_RESTART, // playback / angle / del + [ 47 ] = KEY_SEARCH, // scan / menu / playlist + [ 48 ] = KEY_CHANNEL, // CH surfing / bookmark / memo + + [ 49 ] = KEY_HELP, // help + [ 50 ] = KEY_MODE, // num/memo + [ 51 ] = KEY_ESC, // cancel [ 12 ] = KEY_UP, // up [ 16 ] = KEY_DOWN, // down @@ -148,24 +150,24 @@ static IR_KEYTAB_TYPE eztv_codes[IR_KEYTAB_SIZE] = { [ 45 ] = KEY_PLAY, // play [ 46 ] = KEY_SHUFFLE, // snapshot / shuffle - [ 0 ] = KEY_KP0, - [ 5 ] = KEY_KP1, - [ 6 ] = KEY_KP2, - [ 7 ] = KEY_KP3, - [ 9 ] = KEY_KP4, - [ 10 ] = KEY_KP5, - [ 11 ] = KEY_KP6, - [ 13 ] = KEY_KP7, - [ 14 ] = KEY_KP8, - [ 15 ] = KEY_KP9, - - [ 42 ] = KEY_VOLUMEUP, - [ 17 ] = KEY_VOLUMEDOWN, - [ 24 ] = KEY_CHANNELUP, // CH.tracking up - [ 25 ] = KEY_CHANNELDOWN, // CH.tracking down - - [ 19 ] = KEY_KPENTER, // enter - [ 33 ] = KEY_KPDOT, // . (decimal dot) + [ 0 ] = KEY_KP0, + [ 5 ] = KEY_KP1, + [ 6 ] = KEY_KP2, + [ 7 ] = KEY_KP3, + [ 9 ] = KEY_KP4, + [ 10 ] = KEY_KP5, + [ 11 ] = KEY_KP6, + [ 13 ] = KEY_KP7, + [ 14 ] = KEY_KP8, + [ 15 ] = KEY_KP9, + + [ 42 ] = KEY_VOLUMEUP, + [ 17 ] = KEY_VOLUMEDOWN, + [ 24 ] = KEY_CHANNELUP, // CH.tracking up + [ 25 ] = KEY_CHANNELDOWN, // CH.tracking down + + [ 19 ] = KEY_KPENTER, // enter + [ 33 ] = KEY_KPDOT, // . (decimal dot) }; static IR_KEYTAB_TYPE avacssmart_codes[IR_KEYTAB_SIZE] = { @@ -401,7 +403,183 @@ static IR_KEYTAB_TYPE manli_codes[IR_KEYTAB_SIZE] = { // 0x1d unused ? }; -/* ---------------------------------------------------------------------- */ + + +/* Mike Baikov <mike@baikov.com> */ +static IR_KEYTAB_TYPE gotview7135_codes[IR_KEYTAB_SIZE] = { + + [ 33 ] = KEY_POWER, + [ 105] = KEY_TV, + [ 51 ] = KEY_KP0, + [ 81 ] = KEY_KP1, + [ 49 ] = KEY_KP2, + [ 113] = KEY_KP3, + [ 59 ] = KEY_KP4, + [ 88 ] = KEY_KP5, + [ 65 ] = KEY_KP6, + [ 72 ] = KEY_KP7, + [ 48 ] = KEY_KP8, + [ 83 ] = KEY_KP9, + [ 115] = KEY_AGAIN, /* LOOP */ + [ 10 ] = KEY_AUDIO, + [ 97 ] = KEY_PRINT, /* PREVIEW */ + [ 122] = KEY_VIDEO, + [ 32 ] = KEY_CHANNELUP, + [ 64 ] = KEY_CHANNELDOWN, + [ 24 ] = KEY_VOLUMEDOWN, + [ 80 ] = KEY_VOLUMEUP, + [ 16 ] = KEY_MUTE, + [ 74 ] = KEY_SEARCH, + [ 123] = KEY_SHUFFLE, /* SNAPSHOT */ + [ 34 ] = KEY_RECORD, + [ 98 ] = KEY_STOP, + [ 120] = KEY_PLAY, + [ 57 ] = KEY_REWIND, + [ 89 ] = KEY_PAUSE, + [ 25 ] = KEY_FORWARD, + [ 9 ] = KEY_ZOOM, + + [ 82 ] = KEY_F21, /* LIVE TIMESHIFT */ + [ 26 ] = KEY_F22, /* MIN TIMESHIFT */ + [ 58 ] = KEY_F23, /* TIMESHIFT */ + [ 112] = KEY_F24, /* NORMAL TIMESHIFT */ +}; + +static IR_KEYTAB_TYPE ir_codes_purpletv[IR_KEYTAB_SIZE] = { + [ 0x3 ] = KEY_POWER, + [ 0x6f ] = KEY_MUTE, + [ 0x10 ] = KEY_BACKSPACE, /* Recall */ + + [ 0x11 ] = KEY_KP0, + [ 0x4 ] = KEY_KP1, + [ 0x5 ] = KEY_KP2, + [ 0x6 ] = KEY_KP3, + [ 0x8 ] = KEY_KP4, + [ 0x9 ] = KEY_KP5, + [ 0xa ] = KEY_KP6, + [ 0xc ] = KEY_KP7, + [ 0xd ] = KEY_KP8, + [ 0xe ] = KEY_KP9, + [ 0x12 ] = KEY_KPDOT, /* 100+ */ + + [ 0x7 ] = KEY_VOLUMEUP, + [ 0xb ] = KEY_VOLUMEDOWN, + [ 0x1a ] = KEY_KPPLUS, + [ 0x18 ] = KEY_KPMINUS, + [ 0x15 ] = KEY_UP, + [ 0x1d ] = KEY_DOWN, + [ 0xf ] = KEY_CHANNELUP, + [ 0x13 ] = KEY_CHANNELDOWN, + [ 0x48 ] = KEY_ZOOM, + + [ 0x1b ] = KEY_VIDEO, /* Video source */ + [ 0x49 ] = KEY_LANGUAGE, /* MTS Select */ + [ 0x19 ] = KEY_SEARCH, /* Auto Scan */ + + [ 0x4b ] = KEY_RECORD, + [ 0x46 ] = KEY_PLAY, + [ 0x45 ] = KEY_PAUSE, /* Pause */ + [ 0x44 ] = KEY_STOP, + [ 0x40 ] = KEY_FORWARD, /* Forward ? */ + [ 0x42 ] = KEY_REWIND, /* Backward ? */ + +}; + +static IR_KEYTAB_TYPE ir_codes_pinnacle[IR_KEYTAB_SIZE] = { + [ 0x59 ] = KEY_MUTE, + [ 0x4a ] = KEY_POWER, + + [ 0x18 ] = KEY_TEXT, + [ 0x26 ] = KEY_TV, + [ 0x3d ] = KEY_PRINT, + + [ 0x48 ] = KEY_RED, + [ 0x04 ] = KEY_GREEN, + [ 0x11 ] = KEY_YELLOW, + [ 0x00 ] = KEY_BLUE, + + [ 0x2d ] = KEY_VOLUMEUP, + [ 0x1e ] = KEY_VOLUMEDOWN, + + [ 0x49 ] = KEY_MENU, + + [ 0x16 ] = KEY_CHANNELUP, + [ 0x17 ] = KEY_CHANNELDOWN, + + [ 0x20 ] = KEY_UP, + [ 0x21 ] = KEY_DOWN, + [ 0x22 ] = KEY_LEFT, + [ 0x23 ] = KEY_RIGHT, + [ 0x0d ] = KEY_SELECT, + + + + [ 0x08 ] = KEY_BACK, + [ 0x07 ] = KEY_REFRESH, + + [ 0x2f ] = KEY_ZOOM, + [ 0x29 ] = KEY_RECORD, + + [ 0x4b ] = KEY_PAUSE, + [ 0x4d ] = KEY_REWIND, + [ 0x2e ] = KEY_PLAY, + [ 0x4e ] = KEY_FORWARD, + [ 0x53 ] = KEY_PREVIOUS, + [ 0x4c ] = KEY_STOP, + [ 0x54 ] = KEY_NEXT, + + [ 0x69 ] = KEY_KP0, + [ 0x6a ] = KEY_KP1, + [ 0x6b ] = KEY_KP2, + [ 0x6c ] = KEY_KP3, + [ 0x6d ] = KEY_KP4, + [ 0x6e ] = KEY_KP5, + [ 0x6f ] = KEY_KP6, + [ 0x70 ] = KEY_KP7, + [ 0x71 ] = KEY_KP8, + [ 0x72 ] = KEY_KP9, + + [ 0x74 ] = KEY_CHANNEL, + [ 0x0a ] = KEY_BACKSPACE, +}; + +/* Mapping for the 28 key remote control as seen at + http://www.sednacomputer.com/photo/cardbus-tv.jpg + Pavel Mihaylov <bin@bash.info> */ +static IR_KEYTAB_TYPE pctv_sedna_codes[IR_KEYTAB_SIZE] = { + [ 0 ] = KEY_KP0, + [ 1 ] = KEY_KP1, + [ 2 ] = KEY_KP2, + [ 3 ] = KEY_KP3, + [ 4 ] = KEY_KP4, + [ 5 ] = KEY_KP5, + [ 6 ] = KEY_KP6, + [ 7 ] = KEY_KP7, + [ 8 ] = KEY_KP8, + [ 9 ] = KEY_KP9, + + [ 0x0a ] = KEY_AGAIN, /* Recall */ + [ 0x0b ] = KEY_CHANNELUP, + [ 0x0c ] = KEY_VOLUMEUP, + [ 0x0d ] = KEY_MODE, /* Stereo */ + [ 0x0e ] = KEY_STOP, + [ 0x0f ] = KEY_PREVIOUSSONG, + [ 0x10 ] = KEY_ZOOM, + [ 0x11 ] = KEY_TUNER, /* Source */ + [ 0x12 ] = KEY_POWER, + [ 0x13 ] = KEY_MUTE, + [ 0x15 ] = KEY_CHANNELDOWN, + [ 0x18 ] = KEY_VOLUMEDOWN, + [ 0x19 ] = KEY_SHUFFLE, /* Snapshot */ + [ 0x1a ] = KEY_NEXTSONG, + [ 0x1b ] = KEY_TEXT, /* Time Shift */ + [ 0x1c ] = KEY_RADIO, /* FM Radio */ + [ 0x1d ] = KEY_RECORD, + [ 0x1e ] = KEY_PAUSE, +}; + + +/* -------------------- GPIO generic keycode builder -------------------- */ static int build_key(struct saa7134_dev *dev) { @@ -413,13 +591,13 @@ static int build_key(struct saa7134_dev *dev) saa_setb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN); gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); - if (ir->polling) { - if (ir->last_gpio == gpio) - return 0; - ir->last_gpio = gpio; - } + if (ir->polling) { + if (ir->last_gpio == gpio) + return 0; + ir->last_gpio = gpio; + } - data = ir_extract_bits(gpio, ir->mask_keycode); + data = ir_extract_bits(gpio, ir->mask_keycode); dprintk("build_key gpio=0x%x mask=0x%x data=%d\n", gpio, ir->mask_keycode, data); @@ -432,13 +610,87 @@ static int build_key(struct saa7134_dev *dev) return 0; } -/* ---------------------------------------------------------------------- */ +/* --------------------- Chip specific I2C key builders ----------------- */ + +static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char b; + + /* poll IR chip */ + if (1 != i2c_master_recv(&ir->c,&b,1)) { + i2cdprintk("read error\n"); + return -EIO; + } + + /* no button press */ + if (b==0) + return 0; + + /* repeating */ + if (b & 0x80) + return 1; + + *ir_key = b; + *ir_raw = b; + return 1; +} + +/* The new pinnacle PCTV remote (with the colored buttons) + * + * Ricardo Cerqueira <v4l@cerqueira.org> + */ + +static int get_key_pinnacle(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char b[4]; + unsigned int start = 0,parity = 0,code = 0; + + /* poll IR chip */ + if (4 != i2c_master_recv(&ir->c,b,4)) { + i2cdprintk("read error\n"); + return -EIO; + } + + for (start = 0; start<4; start++) { + if (b[start] == 0x80) { + code=b[(start+3)%4]; + parity=b[(start+2)%4]; + } + } + + /* Empty Request */ + if (parity==0) + return 0; + + /* Repeating... */ + if (ir->old == parity) + return 0; + + + ir->old = parity; + + /* Reduce code value to fit inside IR_KEYTAB_SIZE + * + * this is the only value that results in 42 unique + * codes < 128 + */ + + code %= 0x88; + + *ir_raw = code; + *ir_key = code; + + i2cdprintk("Pinnacle PCTV key %02x\n", code); + + return 1; +} + void saa7134_input_irq(struct saa7134_dev *dev) { - struct saa7134_ir *ir = dev->remote; + struct saa7134_ir *ir = dev->remote; - if (!ir->polling) + if (!ir->polling) build_key(dev); } @@ -464,7 +716,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) int polling = 0; int ir_type = IR_TYPE_OTHER; - if (!dev->has_remote) + if (dev->has_remote != SAA7134_REMOTE_GPIO) return -ENODEV; if (disable_ir) return -ENODEV; @@ -473,7 +725,8 @@ int saa7134_input_init1(struct saa7134_dev *dev) switch (dev->board) { case SAA7134_BOARD_FLYVIDEO2000: case SAA7134_BOARD_FLYVIDEO3000: - case SAA7134_BOARD_FLYTVPLATINUM_FM: + case SAA7134_BOARD_FLYTVPLATINUM_FM: + case SAA7134_BOARD_FLYTVPLATINUM_MINI2: ir_codes = flyvideo_codes; mask_keycode = 0xEC00000; mask_keydown = 0x0040000; @@ -514,14 +767,33 @@ int saa7134_input_init1(struct saa7134_dev *dev) saa_setb(SAA7134_GPIO_GPMODE0, 0x4); saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4); break; + case SAA7134_BOARD_KWORLD_TERMINATOR: + ir_codes = avacssmart_codes; + mask_keycode = 0x00001f; + mask_keyup = 0x000060; + polling = 50; // ms + break; case SAA7134_BOARD_MANLI_MTV001: case SAA7134_BOARD_MANLI_MTV002: + case SAA7134_BOARD_BEHOLD_409FM: ir_codes = manli_codes; mask_keycode = 0x001f00; mask_keyup = 0x004000; - mask_keydown = 0x002000; polling = 50; // ms break; + case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS: + ir_codes = pctv_sedna_codes; + mask_keycode = 0x001f00; + mask_keyup = 0x004000; + polling = 50; // ms + break; + case SAA7134_BOARD_GOTVIEW_7135: + ir_codes = gotview7135_codes; + mask_keycode = 0x0003EC; + mask_keyup = 0x008000; + mask_keydown = 0x000010; + polling = 50; // ms + break; case SAA7134_BOARD_VIDEOMATE_TV_PVR: case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII: ir_codes = videomate_tv_pvr_codes; @@ -529,6 +801,12 @@ int saa7134_input_init1(struct saa7134_dev *dev) mask_keyup = 0x400000; polling = 50; // ms break; + case SAA7134_BOARD_VIDEOMATE_DVBT_300: + case SAA7134_BOARD_VIDEOMATE_DVBT_200: + ir_codes = videomate_tv_pvr_codes; + mask_keycode = 0x003F00; + mask_keyup = 0x040000; + break; } if (NULL == ir_codes) { printk("%s: Oops: IR config error [card=%d]\n", @@ -548,7 +826,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) ir->mask_keycode = mask_keycode; ir->mask_keydown = mask_keydown; ir->mask_keyup = mask_keyup; - ir->polling = polling; + ir->polling = polling; /* init input device */ snprintf(ir->name, sizeof(ir->name), "saa7134 IR (%s)", @@ -596,6 +874,31 @@ void saa7134_input_fini(struct saa7134_dev *dev) dev->remote = NULL; } +void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) +{ + if (disable_ir) { + dprintk("Found supported i2c remote, but IR has been disabled\n"); + ir->get_key=NULL; + return; + } + + switch (dev->board) { + case SAA7134_BOARD_PINNACLE_PCTV_110i: + snprintf(ir->c.name, sizeof(ir->c.name), "Pinnacle PCTV"); + ir->get_key = get_key_pinnacle; + ir->ir_codes = ir_codes_pinnacle; + break; + case SAA7134_BOARD_UPMOST_PURPLE_TV: + snprintf(ir->c.name, sizeof(ir->c.name), "Purple TV"); + ir->get_key = get_key_purpletv; + ir->ir_codes = ir_codes_purpletv; + break; + default: + dprintk("Shouldn't get here: Unknown board %x for I2C IR?\n",dev->board); + break; + } + +} /* ---------------------------------------------------------------------- * Local variables: * c-basic-offset: 8 diff --git a/drivers/media/video/saa7134/saa7134-oss.c b/drivers/media/video/saa7134/saa7134-oss.c index c20630c82f1c..fd53dfcc1644 100644 --- a/drivers/media/video/saa7134/saa7134-oss.c +++ b/drivers/media/video/saa7134/saa7134-oss.c @@ -44,6 +44,7 @@ MODULE_PARM_DESC(oss_rate,"sample rate (valid are: 32000,48000)"); #define dprintk(fmt, arg...) if (oss_debug) \ printk(KERN_DEBUG "%s/oss: " fmt, dev->name , ## arg) + /* ------------------------------------------------------------------ */ static int dsp_buffer_conf(struct saa7134_dev *dev, int blksize, int blocks) @@ -58,12 +59,12 @@ static int dsp_buffer_conf(struct saa7134_dev *dev, int blksize, int blocks) if ((blksize * blocks) > 1024*1024) blocks = 1024*1024 / blksize; - dev->oss.blocks = blocks; - dev->oss.blksize = blksize; - dev->oss.bufsize = blksize * blocks; + dev->dmasound.blocks = blocks; + dev->dmasound.blksize = blksize; + dev->dmasound.bufsize = blksize * blocks; dprintk("buffer config: %d blocks / %d bytes, %d kB total\n", - blocks,blksize,blksize * blocks / 1024); + blocks,blksize,blksize * blocks / 1024); return 0; } @@ -71,11 +72,11 @@ static int dsp_buffer_init(struct saa7134_dev *dev) { int err; - if (!dev->oss.bufsize) + if (!dev->dmasound.bufsize) BUG(); - videobuf_dma_init(&dev->oss.dma); - err = videobuf_dma_init_kernel(&dev->oss.dma, PCI_DMA_FROMDEVICE, - (dev->oss.bufsize + PAGE_SIZE) >> PAGE_SHIFT); + videobuf_dma_init(&dev->dmasound.dma); + err = videobuf_dma_init_kernel(&dev->dmasound.dma, PCI_DMA_FROMDEVICE, + (dev->dmasound.bufsize + PAGE_SIZE) >> PAGE_SHIFT); if (0 != err) return err; return 0; @@ -83,26 +84,26 @@ static int dsp_buffer_init(struct saa7134_dev *dev) static int dsp_buffer_free(struct saa7134_dev *dev) { - if (!dev->oss.blksize) + if (!dev->dmasound.blksize) BUG(); - videobuf_dma_free(&dev->oss.dma); - dev->oss.blocks = 0; - dev->oss.blksize = 0; - dev->oss.bufsize = 0; + videobuf_dma_free(&dev->dmasound.dma); + dev->dmasound.blocks = 0; + dev->dmasound.blksize = 0; + dev->dmasound.bufsize = 0; return 0; } static void dsp_dma_start(struct saa7134_dev *dev) { - dev->oss.dma_blk = 0; - dev->oss.dma_running = 1; + dev->dmasound.dma_blk = 0; + dev->dmasound.dma_running = 1; saa7134_set_dmabits(dev); } static void dsp_dma_stop(struct saa7134_dev *dev) { - dev->oss.dma_blk = -1; - dev->oss.dma_running = 0; + dev->dmasound.dma_blk = -1; + dev->dmasound.dma_running = 0; saa7134_set_dmabits(dev); } @@ -113,18 +114,18 @@ static int dsp_rec_start(struct saa7134_dev *dev) unsigned long flags; /* prepare buffer */ - if (0 != (err = videobuf_dma_pci_map(dev->pci,&dev->oss.dma))) + if (0 != (err = videobuf_dma_pci_map(dev->pci,&dev->dmasound.dma))) return err; - if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->oss.pt))) + if (0 != (err = saa7134_pgtable_alloc(dev->pci,&dev->dmasound.pt))) goto fail1; - if (0 != (err = saa7134_pgtable_build(dev->pci,&dev->oss.pt, - dev->oss.dma.sglist, - dev->oss.dma.sglen, + if (0 != (err = saa7134_pgtable_build(dev->pci,&dev->dmasound.pt, + dev->dmasound.dma.sglist, + dev->dmasound.dma.sglen, 0))) goto fail2; /* sample format */ - switch (dev->oss.afmt) { + switch (dev->dmasound.afmt) { case AFMT_U8: case AFMT_S8: fmt = 0x00; break; case AFMT_U16_LE: @@ -136,14 +137,14 @@ static int dsp_rec_start(struct saa7134_dev *dev) goto fail2; } - switch (dev->oss.afmt) { + switch (dev->dmasound.afmt) { case AFMT_S8: case AFMT_S16_LE: case AFMT_S16_BE: sign = 1; break; default: sign = 0; break; } - switch (dev->oss.afmt) { + switch (dev->dmasound.afmt) { case AFMT_U16_BE: case AFMT_S16_BE: bswap = 1; break; default: bswap = 0; break; @@ -151,58 +152,58 @@ static int dsp_rec_start(struct saa7134_dev *dev) switch (dev->pci->device) { case PCI_DEVICE_ID_PHILIPS_SAA7134: - if (1 == dev->oss.channels) + if (1 == dev->dmasound.channels) fmt |= (1 << 3); - if (2 == dev->oss.channels) + if (2 == dev->dmasound.channels) fmt |= (3 << 3); if (sign) fmt |= 0x04; - fmt |= (TV == dev->oss.input) ? 0xc0 : 0x80; + fmt |= (TV == dev->dmasound.input) ? 0xc0 : 0x80; - saa_writeb(SAA7134_NUM_SAMPLES0, ((dev->oss.blksize - 1) & 0x0000ff)); - saa_writeb(SAA7134_NUM_SAMPLES1, ((dev->oss.blksize - 1) & 0x00ff00) >> 8); - saa_writeb(SAA7134_NUM_SAMPLES2, ((dev->oss.blksize - 1) & 0xff0000) >> 16); + saa_writeb(SAA7134_NUM_SAMPLES0, ((dev->dmasound.blksize - 1) & 0x0000ff)); + saa_writeb(SAA7134_NUM_SAMPLES1, ((dev->dmasound.blksize - 1) & 0x00ff00) >> 8); + saa_writeb(SAA7134_NUM_SAMPLES2, ((dev->dmasound.blksize - 1) & 0xff0000) >> 16); saa_writeb(SAA7134_AUDIO_FORMAT_CTRL, fmt); break; case PCI_DEVICE_ID_PHILIPS_SAA7133: case PCI_DEVICE_ID_PHILIPS_SAA7135: - if (1 == dev->oss.channels) + if (1 == dev->dmasound.channels) fmt |= (1 << 4); - if (2 == dev->oss.channels) + if (2 == dev->dmasound.channels) fmt |= (2 << 4); if (!sign) fmt |= 0x04; - saa_writel(0x588 >> 2, dev->oss.blksize -4); - saa_writel(0x58c >> 2, 0x543210 | (fmt << 24)); + saa_writel(SAA7133_NUM_SAMPLES, dev->dmasound.blksize -4); + saa_writel(SAA7133_AUDIO_CHANNEL, 0x543210 | (fmt << 24)); break; } dprintk("rec_start: afmt=%d ch=%d => fmt=0x%x swap=%c\n", - dev->oss.afmt, dev->oss.channels, fmt, + dev->dmasound.afmt, dev->dmasound.channels, fmt, bswap ? 'b' : '-'); /* dma: setup channel 6 (= AUDIO) */ control = SAA7134_RS_CONTROL_BURST_16 | SAA7134_RS_CONTROL_ME | - (dev->oss.pt.dma >> 12); + (dev->dmasound.pt.dma >> 12); if (bswap) control |= SAA7134_RS_CONTROL_BSWAP; saa_writel(SAA7134_RS_BA1(6),0); - saa_writel(SAA7134_RS_BA2(6),dev->oss.blksize); + saa_writel(SAA7134_RS_BA2(6),dev->dmasound.blksize); saa_writel(SAA7134_RS_PITCH(6),0); saa_writel(SAA7134_RS_CONTROL(6),control); /* start dma */ - dev->oss.recording_on = 1; + dev->dmasound.recording_on = 1; spin_lock_irqsave(&dev->slock,flags); dsp_dma_start(dev); spin_unlock_irqrestore(&dev->slock,flags); return 0; fail2: - saa7134_pgtable_free(dev->pci,&dev->oss.pt); + saa7134_pgtable_free(dev->pci,&dev->dmasound.pt); fail1: - videobuf_dma_pci_unmap(dev->pci,&dev->oss.dma); + videobuf_dma_pci_unmap(dev->pci,&dev->dmasound.dma); return err; } @@ -210,17 +211,17 @@ static int dsp_rec_stop(struct saa7134_dev *dev) { unsigned long flags; - dprintk("rec_stop dma_blk=%d\n",dev->oss.dma_blk); + dprintk("rec_stop dma_blk=%d\n",dev->dmasound.dma_blk); /* stop dma */ - dev->oss.recording_on = 0; + dev->dmasound.recording_on = 0; spin_lock_irqsave(&dev->slock,flags); dsp_dma_stop(dev); spin_unlock_irqrestore(&dev->slock,flags); /* unlock buffer */ - saa7134_pgtable_free(dev->pci,&dev->oss.pt); - videobuf_dma_pci_unmap(dev->pci,&dev->oss.dma); + saa7134_pgtable_free(dev->pci,&dev->dmasound.pt); + videobuf_dma_pci_unmap(dev->pci,&dev->dmasound.dma); return 0; } @@ -235,35 +236,35 @@ static int dsp_open(struct inode *inode, struct file *file) list_for_each(list,&saa7134_devlist) { h = list_entry(list, struct saa7134_dev, devlist); - if (h->oss.minor_dsp == minor) + if (h->dmasound.minor_dsp == minor) dev = h; } if (NULL == dev) return -ENODEV; - down(&dev->oss.lock); + down(&dev->dmasound.lock); err = -EBUSY; - if (dev->oss.users_dsp) + if (dev->dmasound.users_dsp) goto fail1; - dev->oss.users_dsp++; + dev->dmasound.users_dsp++; file->private_data = dev; - dev->oss.afmt = AFMT_U8; - dev->oss.channels = 1; - dev->oss.read_count = 0; - dev->oss.read_offset = 0; + dev->dmasound.afmt = AFMT_U8; + dev->dmasound.channels = 1; + dev->dmasound.read_count = 0; + dev->dmasound.read_offset = 0; dsp_buffer_conf(dev,PAGE_SIZE,64); err = dsp_buffer_init(dev); if (0 != err) goto fail2; - up(&dev->oss.lock); + up(&dev->dmasound.lock); return 0; fail2: - dev->oss.users_dsp--; + dev->dmasound.users_dsp--; fail1: - up(&dev->oss.lock); + up(&dev->dmasound.lock); return err; } @@ -271,13 +272,13 @@ static int dsp_release(struct inode *inode, struct file *file) { struct saa7134_dev *dev = file->private_data; - down(&dev->oss.lock); - if (dev->oss.recording_on) + down(&dev->dmasound.lock); + if (dev->dmasound.recording_on) dsp_rec_stop(dev); dsp_buffer_free(dev); - dev->oss.users_dsp--; + dev->dmasound.users_dsp--; file->private_data = NULL; - up(&dev->oss.lock); + up(&dev->dmasound.lock); return 0; } @@ -290,12 +291,12 @@ static ssize_t dsp_read(struct file *file, char __user *buffer, unsigned long flags; int err,ret = 0; - add_wait_queue(&dev->oss.wq, &wait); - down(&dev->oss.lock); + add_wait_queue(&dev->dmasound.wq, &wait); + down(&dev->dmasound.lock); while (count > 0) { /* wait for data if needed */ - if (0 == dev->oss.read_count) { - if (!dev->oss.recording_on) { + if (0 == dev->dmasound.read_count) { + if (!dev->dmasound.recording_on) { err = dsp_rec_start(dev); if (err < 0) { if (0 == ret) @@ -303,8 +304,8 @@ static ssize_t dsp_read(struct file *file, char __user *buffer, break; } } - if (dev->oss.recording_on && - !dev->oss.dma_running) { + if (dev->dmasound.recording_on && + !dev->dmasound.dma_running) { /* recover from overruns */ spin_lock_irqsave(&dev->slock,flags); dsp_dma_start(dev); @@ -315,12 +316,12 @@ static ssize_t dsp_read(struct file *file, char __user *buffer, ret = -EAGAIN; break; } - up(&dev->oss.lock); + up(&dev->dmasound.lock); set_current_state(TASK_INTERRUPTIBLE); - if (0 == dev->oss.read_count) + if (0 == dev->dmasound.read_count) schedule(); set_current_state(TASK_RUNNING); - down(&dev->oss.lock); + down(&dev->dmasound.lock); if (signal_pending(current)) { if (0 == ret) ret = -EINTR; @@ -330,12 +331,12 @@ static ssize_t dsp_read(struct file *file, char __user *buffer, /* copy data to userspace */ bytes = count; - if (bytes > dev->oss.read_count) - bytes = dev->oss.read_count; - if (bytes > dev->oss.bufsize - dev->oss.read_offset) - bytes = dev->oss.bufsize - dev->oss.read_offset; + if (bytes > dev->dmasound.read_count) + bytes = dev->dmasound.read_count; + if (bytes > dev->dmasound.bufsize - dev->dmasound.read_offset) + bytes = dev->dmasound.bufsize - dev->dmasound.read_offset; if (copy_to_user(buffer + ret, - dev->oss.dma.vmalloc + dev->oss.read_offset, + dev->dmasound.dma.vmalloc + dev->dmasound.read_offset, bytes)) { if (0 == ret) ret = -EFAULT; @@ -344,13 +345,13 @@ static ssize_t dsp_read(struct file *file, char __user *buffer, ret += bytes; count -= bytes; - dev->oss.read_count -= bytes; - dev->oss.read_offset += bytes; - if (dev->oss.read_offset == dev->oss.bufsize) - dev->oss.read_offset = 0; + dev->dmasound.read_count -= bytes; + dev->dmasound.read_offset += bytes; + if (dev->dmasound.read_offset == dev->dmasound.bufsize) + dev->dmasound.read_offset = 0; } - up(&dev->oss.lock); - remove_wait_queue(&dev->oss.wq, &wait); + up(&dev->dmasound.lock); + remove_wait_queue(&dev->dmasound.wq, &wait); return ret; } @@ -370,53 +371,53 @@ static int dsp_ioctl(struct inode *inode, struct file *file, if (oss_debug > 1) saa7134_print_ioctl(dev->name,cmd); - switch (cmd) { - case OSS_GETVERSION: - return put_user(SOUND_VERSION, p); - case SNDCTL_DSP_GETCAPS: + switch (cmd) { + case OSS_GETVERSION: + return put_user(SOUND_VERSION, p); + case SNDCTL_DSP_GETCAPS: return 0; - case SNDCTL_DSP_SPEED: + case SNDCTL_DSP_SPEED: if (get_user(val, p)) return -EFAULT; /* fall through */ - case SOUND_PCM_READ_RATE: - return put_user(dev->oss.rate, p); + case SOUND_PCM_READ_RATE: + return put_user(dev->dmasound.rate, p); - case SNDCTL_DSP_STEREO: + case SNDCTL_DSP_STEREO: if (get_user(val, p)) return -EFAULT; - down(&dev->oss.lock); - dev->oss.channels = val ? 2 : 1; - if (dev->oss.recording_on) { + down(&dev->dmasound.lock); + dev->dmasound.channels = val ? 2 : 1; + if (dev->dmasound.recording_on) { dsp_rec_stop(dev); dsp_rec_start(dev); } - up(&dev->oss.lock); - return put_user(dev->oss.channels-1, p); + up(&dev->dmasound.lock); + return put_user(dev->dmasound.channels-1, p); - case SNDCTL_DSP_CHANNELS: + case SNDCTL_DSP_CHANNELS: if (get_user(val, p)) return -EFAULT; if (val != 1 && val != 2) return -EINVAL; - down(&dev->oss.lock); - dev->oss.channels = val; - if (dev->oss.recording_on) { + down(&dev->dmasound.lock); + dev->dmasound.channels = val; + if (dev->dmasound.recording_on) { dsp_rec_stop(dev); dsp_rec_start(dev); } - up(&dev->oss.lock); + up(&dev->dmasound.lock); /* fall through */ - case SOUND_PCM_READ_CHANNELS: - return put_user(dev->oss.channels, p); + case SOUND_PCM_READ_CHANNELS: + return put_user(dev->dmasound.channels, p); - case SNDCTL_DSP_GETFMTS: /* Returns a mask */ + case SNDCTL_DSP_GETFMTS: /* Returns a mask */ return put_user(AFMT_U8 | AFMT_S8 | AFMT_U16_LE | AFMT_U16_BE | AFMT_S16_LE | AFMT_S16_BE, p); - case SNDCTL_DSP_SETFMT: /* Selects ONE fmt */ + case SNDCTL_DSP_SETFMT: /* Selects ONE fmt */ if (get_user(val, p)) return -EFAULT; switch (val) { @@ -429,20 +430,20 @@ static int dsp_ioctl(struct inode *inode, struct file *file, case AFMT_U16_BE: case AFMT_S16_LE: case AFMT_S16_BE: - down(&dev->oss.lock); - dev->oss.afmt = val; - if (dev->oss.recording_on) { + down(&dev->dmasound.lock); + dev->dmasound.afmt = val; + if (dev->dmasound.recording_on) { dsp_rec_stop(dev); dsp_rec_start(dev); } - up(&dev->oss.lock); - return put_user(dev->oss.afmt, p); + up(&dev->dmasound.lock); + return put_user(dev->dmasound.afmt, p); default: return -EINVAL; } - case SOUND_PCM_READ_BITS: - switch (dev->oss.afmt) { + case SOUND_PCM_READ_BITS: + switch (dev->dmasound.afmt) { case AFMT_U8: case AFMT_S8: return put_user(8, p); @@ -455,23 +456,23 @@ static int dsp_ioctl(struct inode *inode, struct file *file, return -EINVAL; } - case SNDCTL_DSP_NONBLOCK: - file->f_flags |= O_NONBLOCK; - return 0; + case SNDCTL_DSP_NONBLOCK: + file->f_flags |= O_NONBLOCK; + return 0; - case SNDCTL_DSP_RESET: - down(&dev->oss.lock); - if (dev->oss.recording_on) + case SNDCTL_DSP_RESET: + down(&dev->dmasound.lock); + if (dev->dmasound.recording_on) dsp_rec_stop(dev); - up(&dev->oss.lock); + up(&dev->dmasound.lock); return 0; - case SNDCTL_DSP_GETBLKSIZE: - return put_user(dev->oss.blksize, p); + case SNDCTL_DSP_GETBLKSIZE: + return put_user(dev->dmasound.blksize, p); - case SNDCTL_DSP_SETFRAGMENT: + case SNDCTL_DSP_SETFRAGMENT: if (get_user(val, p)) return -EFAULT; - if (dev->oss.recording_on) + if (dev->dmasound.recording_on) return -EBUSY; dsp_buffer_free(dev); /* used to be arg >> 16 instead of val >> 16; fixed */ @@ -479,16 +480,16 @@ static int dsp_ioctl(struct inode *inode, struct file *file, dsp_buffer_init(dev); return 0; - case SNDCTL_DSP_SYNC: + case SNDCTL_DSP_SYNC: /* NOP */ return 0; case SNDCTL_DSP_GETISPACE: { audio_buf_info info; - info.fragsize = dev->oss.blksize; - info.fragstotal = dev->oss.blocks; - info.bytes = dev->oss.read_count; + info.fragsize = dev->dmasound.blksize; + info.fragstotal = dev->dmasound.blocks; + info.bytes = dev->dmasound.read_count; info.fragments = info.bytes / info.fragsize; if (copy_to_user(argp, &info, sizeof(info))) return -EFAULT; @@ -504,13 +505,13 @@ static unsigned int dsp_poll(struct file *file, struct poll_table_struct *wait) struct saa7134_dev *dev = file->private_data; unsigned int mask = 0; - poll_wait(file, &dev->oss.wq, wait); + poll_wait(file, &dev->dmasound.wq, wait); - if (0 == dev->oss.read_count) { - down(&dev->oss.lock); - if (!dev->oss.recording_on) + if (0 == dev->dmasound.read_count) { + down(&dev->dmasound.lock); + if (!dev->dmasound.recording_on) dsp_rec_start(dev); - up(&dev->oss.lock); + up(&dev->dmasound.lock); } else mask |= (POLLIN | POLLRDNORM); return mask; @@ -534,7 +535,7 @@ mixer_recsrc_7134(struct saa7134_dev *dev) { int analog_io,rate; - switch (dev->oss.input) { + switch (dev->dmasound.input) { case TV: saa_andorb(SAA7134_AUDIO_FORMAT_CTRL, 0xc0, 0xc0); saa_andorb(SAA7134_SIF_SAMPLE_FREQ, 0x03, 0x00); @@ -542,8 +543,8 @@ mixer_recsrc_7134(struct saa7134_dev *dev) case LINE1: case LINE2: case LINE2_LEFT: - analog_io = (LINE1 == dev->oss.input) ? 0x00 : 0x08; - rate = (32000 == dev->oss.rate) ? 0x01 : 0x03; + analog_io = (LINE1 == dev->dmasound.input) ? 0x00 : 0x08; + rate = (32000 == dev->dmasound.rate) ? 0x01 : 0x03; saa_andorb(SAA7134_ANALOG_IO_SELECT, 0x08, analog_io); saa_andorb(SAA7134_AUDIO_FORMAT_CTRL, 0xc0, 0x80); saa_andorb(SAA7134_SIF_SAMPLE_FREQ, 0x03, rate); @@ -559,10 +560,10 @@ mixer_recsrc_7133(struct saa7134_dev *dev) xbarin = 0x03; // adc anabar = 0; - switch (dev->oss.input) { + switch (dev->dmasound.input) { case TV: xbarin = 0; // Demodulator - anabar = 2; // DACs + anabar = 2; // DACs break; case LINE1: anabar = 0; // aux1, aux1 @@ -585,9 +586,9 @@ mixer_recsrc(struct saa7134_dev *dev, enum saa7134_audio_in src) { static const char *iname[] = { "Oops", "TV", "LINE1", "LINE2" }; - dev->oss.count++; - dev->oss.input = src; - dprintk("mixer input = %s\n",iname[dev->oss.input]); + dev->dmasound.count++; + dev->dmasound.input = src; + dprintk("mixer input = %s\n",iname[dev->dmasound.input]); switch (dev->pci->device) { case PCI_DEVICE_ID_PHILIPS_SAA7134: @@ -639,7 +640,7 @@ static int mixer_open(struct inode *inode, struct file *file) list_for_each(list,&saa7134_devlist) { h = list_entry(list, struct saa7134_dev, devlist); - if (h->oss.minor_mixer == minor) + if (h->dmasound.minor_mixer == minor) dev = h; } if (NULL == dev) @@ -666,28 +667,28 @@ static int mixer_ioctl(struct inode *inode, struct file *file, if (oss_debug > 1) saa7134_print_ioctl(dev->name,cmd); - switch (cmd) { - case OSS_GETVERSION: - return put_user(SOUND_VERSION, p); + switch (cmd) { + case OSS_GETVERSION: + return put_user(SOUND_VERSION, p); case SOUND_MIXER_INFO: { mixer_info info; memset(&info,0,sizeof(info)); - strlcpy(info.id, "TV audio", sizeof(info.id)); - strlcpy(info.name, dev->name, sizeof(info.name)); - info.modify_counter = dev->oss.count; - if (copy_to_user(argp, &info, sizeof(info))) - return -EFAULT; + strlcpy(info.id, "TV audio", sizeof(info.id)); + strlcpy(info.name, dev->name, sizeof(info.name)); + info.modify_counter = dev->dmasound.count; + if (copy_to_user(argp, &info, sizeof(info))) + return -EFAULT; return 0; } case SOUND_OLD_MIXER_INFO: { _old_mixer_info info; memset(&info,0,sizeof(info)); - strlcpy(info.id, "TV audio", sizeof(info.id)); - strlcpy(info.name, dev->name, sizeof(info.name)); - if (copy_to_user(argp, &info, sizeof(info))) - return -EFAULT; + strlcpy(info.id, "TV audio", sizeof(info.id)); + strlcpy(info.name, dev->name, sizeof(info.name)); + if (copy_to_user(argp, &info, sizeof(info))) + return -EFAULT; return 0; } case MIXER_READ(SOUND_MIXER_CAPS): @@ -697,26 +698,26 @@ static int mixer_ioctl(struct inode *inode, struct file *file, case MIXER_READ(SOUND_MIXER_RECMASK): case MIXER_READ(SOUND_MIXER_DEVMASK): val = SOUND_MASK_LINE1 | SOUND_MASK_LINE2; - if (32000 == dev->oss.rate) + if (32000 == dev->dmasound.rate) val |= SOUND_MASK_VIDEO; return put_user(val, p); case MIXER_WRITE(SOUND_MIXER_RECSRC): if (get_user(val, p)) return -EFAULT; - input = dev->oss.input; - if (32000 == dev->oss.rate && - val & SOUND_MASK_VIDEO && dev->oss.input != TV) + input = dev->dmasound.input; + if (32000 == dev->dmasound.rate && + val & SOUND_MASK_VIDEO && dev->dmasound.input != TV) input = TV; - if (val & SOUND_MASK_LINE1 && dev->oss.input != LINE1) + if (val & SOUND_MASK_LINE1 && dev->dmasound.input != LINE1) input = LINE1; - if (val & SOUND_MASK_LINE2 && dev->oss.input != LINE2) + if (val & SOUND_MASK_LINE2 && dev->dmasound.input != LINE2) input = LINE2; - if (input != dev->oss.input) + if (input != dev->dmasound.input) mixer_recsrc(dev,input); /* fall throuth */ case MIXER_READ(SOUND_MIXER_RECSRC): - switch (dev->oss.input) { + switch (dev->dmasound.input) { case TV: ret = SOUND_MASK_VIDEO; break; case LINE1: ret = SOUND_MASK_LINE1; break; case LINE2: ret = SOUND_MASK_LINE2; break; @@ -726,7 +727,7 @@ static int mixer_ioctl(struct inode *inode, struct file *file, case MIXER_WRITE(SOUND_MIXER_VIDEO): case MIXER_READ(SOUND_MIXER_VIDEO): - if (32000 != dev->oss.rate) + if (32000 != dev->dmasound.rate) return -EINVAL; return put_user(100 | 100 << 8, p); @@ -735,22 +736,22 @@ static int mixer_ioctl(struct inode *inode, struct file *file, return -EFAULT; val &= 0xff; val = (val <= 50) ? 50 : 100; - dev->oss.line1 = val; - mixer_level(dev,LINE1,dev->oss.line1); + dev->dmasound.line1 = val; + mixer_level(dev,LINE1,dev->dmasound.line1); /* fall throuth */ case MIXER_READ(SOUND_MIXER_LINE1): - return put_user(dev->oss.line1 | dev->oss.line1 << 8, p); + return put_user(dev->dmasound.line1 | dev->dmasound.line1 << 8, p); case MIXER_WRITE(SOUND_MIXER_LINE2): if (get_user(val, p)) return -EFAULT; val &= 0xff; val = (val <= 50) ? 50 : 100; - dev->oss.line2 = val; - mixer_level(dev,LINE2,dev->oss.line2); + dev->dmasound.line2 = val; + mixer_level(dev,LINE2,dev->dmasound.line2); /* fall throuth */ case MIXER_READ(SOUND_MIXER_LINE2): - return put_user(dev->oss.line2 | dev->oss.line2 << 8, p); + return put_user(dev->dmasound.line2 | dev->dmasound.line2 << 8, p); default: return -EINVAL; @@ -770,8 +771,8 @@ struct file_operations saa7134_mixer_fops = { int saa7134_oss_init1(struct saa7134_dev *dev) { /* general */ - init_MUTEX(&dev->oss.lock); - init_waitqueue_head(&dev->oss.wq); + init_MUTEX(&dev->dmasound.lock); + init_waitqueue_head(&dev->dmasound.wq); switch (dev->pci->device) { case PCI_DEVICE_ID_PHILIPS_SAA7133: @@ -783,17 +784,17 @@ int saa7134_oss_init1(struct saa7134_dev *dev) } /* dsp */ - dev->oss.rate = 32000; + dev->dmasound.rate = 32000; if (oss_rate) - dev->oss.rate = oss_rate; - dev->oss.rate = (dev->oss.rate > 40000) ? 48000 : 32000; + dev->dmasound.rate = oss_rate; + dev->dmasound.rate = (dev->dmasound.rate > 40000) ? 48000 : 32000; /* mixer */ - dev->oss.line1 = 50; - dev->oss.line2 = 50; - mixer_level(dev,LINE1,dev->oss.line1); - mixer_level(dev,LINE2,dev->oss.line2); - mixer_recsrc(dev, (dev->oss.rate == 32000) ? TV : LINE2); + dev->dmasound.line1 = 50; + dev->dmasound.line2 = 50; + mixer_level(dev,LINE1,dev->dmasound.line1); + mixer_level(dev,LINE2,dev->dmasound.line2); + mixer_recsrc(dev, (dev->dmasound.rate == 32000) ? TV : LINE2); return 0; } @@ -809,7 +810,7 @@ void saa7134_irq_oss_done(struct saa7134_dev *dev, unsigned long status) int next_blk, reg = 0; spin_lock(&dev->slock); - if (UNSET == dev->oss.dma_blk) { + if (UNSET == dev->dmasound.dma_blk) { dprintk("irq: recording stopped\n"); goto done; } @@ -817,11 +818,11 @@ void saa7134_irq_oss_done(struct saa7134_dev *dev, unsigned long status) dprintk("irq: lost %ld\n", (status >> 24) & 0x0f); if (0 == (status & 0x10000000)) { /* odd */ - if (0 == (dev->oss.dma_blk & 0x01)) + if (0 == (dev->dmasound.dma_blk & 0x01)) reg = SAA7134_RS_BA1(6); } else { /* even */ - if (1 == (dev->oss.dma_blk & 0x01)) + if (1 == (dev->dmasound.dma_blk & 0x01)) reg = SAA7134_RS_BA2(6); } if (0 == reg) { @@ -829,25 +830,25 @@ void saa7134_irq_oss_done(struct saa7134_dev *dev, unsigned long status) (status & 0x10000000) ? "even" : "odd"); goto done; } - if (dev->oss.read_count >= dev->oss.blksize * (dev->oss.blocks-2)) { - dprintk("irq: overrun [full=%d/%d]\n",dev->oss.read_count, - dev->oss.bufsize); + if (dev->dmasound.read_count >= dev->dmasound.blksize * (dev->dmasound.blocks-2)) { + dprintk("irq: overrun [full=%d/%d]\n",dev->dmasound.read_count, + dev->dmasound.bufsize); dsp_dma_stop(dev); goto done; } /* next block addr */ - next_blk = (dev->oss.dma_blk + 2) % dev->oss.blocks; - saa_writel(reg,next_blk * dev->oss.blksize); + next_blk = (dev->dmasound.dma_blk + 2) % dev->dmasound.blocks; + saa_writel(reg,next_blk * dev->dmasound.blksize); if (oss_debug > 2) dprintk("irq: ok, %s, next_blk=%d, addr=%x\n", (status & 0x10000000) ? "even" : "odd ", next_blk, - next_blk * dev->oss.blksize); + next_blk * dev->dmasound.blksize); /* update status & wake waiting readers */ - dev->oss.dma_blk = (dev->oss.dma_blk + 1) % dev->oss.blocks; - dev->oss.read_count += dev->oss.blksize; - wake_up(&dev->oss.wq); + dev->dmasound.dma_blk = (dev->dmasound.dma_blk + 1) % dev->dmasound.blocks; + dev->dmasound.read_count += dev->dmasound.blksize; + wake_up(&dev->dmasound.wq); done: spin_unlock(&dev->slock); diff --git a/drivers/media/video/saa7134/saa7134-reg.h b/drivers/media/video/saa7134/saa7134-reg.h index ae0c7a165390..ac6431ba4fc3 100644 --- a/drivers/media/video/saa7134/saa7134-reg.h +++ b/drivers/media/video/saa7134/saa7134-reg.h @@ -27,7 +27,7 @@ /* DMA channels, n = 0 ... 6 */ #define SAA7134_RS_BA1(n) ((0x200 >> 2) + 4*n) -#define SAA7134_RS_BA2(n) ((0x204 >> 2) + 4*n) +#define SAA7134_RS_BA2(n) ((0x204 >> 2) + 4*n) #define SAA7134_RS_PITCH(n) ((0x208 >> 2) + 4*n) #define SAA7134_RS_CONTROL(n) ((0x20c >> 2) + 4*n) #define SAA7134_RS_CONTROL_WSWAP (0x01 << 25) @@ -43,16 +43,24 @@ #define SAA7134_FIFO_SIZE (0x2a0 >> 2) #define SAA7134_THRESHOULD (0x2a4 >> 2) +#define SAA7133_NUM_SAMPLES (0x588 >> 2) +#define SAA7133_AUDIO_CHANNEL (0x58c >> 2) +#define SAA7133_AUDIO_FORMAT (0x58f >> 2) +#define SAA7133_DIGITAL_OUTPUT_SEL1 (0x46c >> 2) +#define SAA7133_DIGITAL_OUTPUT_SEL2 (0x470 >> 2) +#define SAA7133_DIGITAL_INPUT_XBAR1 (0x464 >> 2) +#define SAA7133_ANALOG_IO_SELECT (0x594 >> 2) + /* main control */ #define SAA7134_MAIN_CTRL (0x2a8 >> 2) -#define SAA7134_MAIN_CTRL_VPLLE (1 << 15) -#define SAA7134_MAIN_CTRL_APLLE (1 << 14) -#define SAA7134_MAIN_CTRL_EXOSC (1 << 13) -#define SAA7134_MAIN_CTRL_EVFE1 (1 << 12) -#define SAA7134_MAIN_CTRL_EVFE2 (1 << 11) -#define SAA7134_MAIN_CTRL_ESFE (1 << 10) -#define SAA7134_MAIN_CTRL_EBADC (1 << 9) -#define SAA7134_MAIN_CTRL_EBDAC (1 << 8) +#define SAA7134_MAIN_CTRL_VPLLE (1 << 15) +#define SAA7134_MAIN_CTRL_APLLE (1 << 14) +#define SAA7134_MAIN_CTRL_EXOSC (1 << 13) +#define SAA7134_MAIN_CTRL_EVFE1 (1 << 12) +#define SAA7134_MAIN_CTRL_EVFE2 (1 << 11) +#define SAA7134_MAIN_CTRL_ESFE (1 << 10) +#define SAA7134_MAIN_CTRL_EBADC (1 << 9) +#define SAA7134_MAIN_CTRL_EBDAC (1 << 8) #define SAA7134_MAIN_CTRL_TE6 (1 << 6) #define SAA7134_MAIN_CTRL_TE5 (1 << 5) #define SAA7134_MAIN_CTRL_TE4 (1 << 4) @@ -348,6 +356,7 @@ /* test modes */ #define SAA7134_SPECIAL_MODE 0x1d0 +#define SAA7134_PRODUCTION_TEST_MODE 0x1d1 /* audio -- saa7133 + saa7135 only */ #define SAA7135_DSP_RWSTATE 0x580 diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c index 463885601ab4..470903e2f5e5 100644 --- a/drivers/media/video/saa7134/saa7134-ts.c +++ b/drivers/media/video/saa7134/saa7134-ts.c @@ -46,17 +46,11 @@ static int buffer_activate(struct saa7134_dev *dev, struct saa7134_buf *buf, struct saa7134_buf *next) { - u32 control; dprintk("buffer_activate [%p]",buf); buf->vb.state = STATE_ACTIVE; buf->top_seen = 0; - /* dma: setup channel 5 (= TS) */ - control = SAA7134_RS_CONTROL_BURST_16 | - SAA7134_RS_CONTROL_ME | - (buf->pt->dma >> 12); - if (NULL == next) next = buf; if (V4L2_FIELD_TOP == buf->vb.field) { @@ -68,8 +62,6 @@ static int buffer_activate(struct saa7134_dev *dev, saa_writel(SAA7134_RS_BA1(5),saa7134_buffer_base(next)); saa_writel(SAA7134_RS_BA2(5),saa7134_buffer_base(buf)); } - saa_writel(SAA7134_RS_PITCH(5),TS_PACKET_SIZE); - saa_writel(SAA7134_RS_CONTROL(5),control); /* start DMA */ saa7134_set_dmabits(dev); @@ -84,6 +76,7 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, struct saa7134_dev *dev = q->priv_data; struct saa7134_buf *buf = container_of(vb,struct saa7134_buf,vb); unsigned int lines, llength, size; + u32 control; int err; dprintk("buffer_prepare [%p,%s]\n",buf,v4l2_field_names[field]); @@ -115,6 +108,18 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, if (err) goto oops; } + + /* dma: setup channel 5 (= TS) */ + control = SAA7134_RS_CONTROL_BURST_16 | + SAA7134_RS_CONTROL_ME | + (buf->pt->dma >> 12); + + saa_writeb(SAA7134_TS_DMA0, ((lines-1)&0xff)); + saa_writeb(SAA7134_TS_DMA1, (((lines-1)>>8)&0xff)); + saa_writeb(SAA7134_TS_DMA2, ((((lines-1)>>16)&0x3f) | 0x00)); /* TSNOPIT=0, TSCOLAP=0 */ + saa_writel(SAA7134_RS_PITCH(5),TS_PACKET_SIZE); + saa_writel(SAA7134_RS_CONTROL(5),control); + buf->vb.state = STATE_PREPARED; buf->activate = buffer_activate; buf->vb.field = field; @@ -164,11 +169,11 @@ EXPORT_SYMBOL_GPL(saa7134_ts_qops); /* ----------------------------------------------------------- */ /* exported stuff */ -static unsigned int tsbufs = 4; +static unsigned int tsbufs = 8; module_param(tsbufs, int, 0444); MODULE_PARM_DESC(tsbufs,"number of ts buffers, range 2-32"); -static unsigned int ts_nr_packets = 30; +static unsigned int ts_nr_packets = 64; module_param(ts_nr_packets, int, 0444); MODULE_PARM_DESC(ts_nr_packets,"size of a ts buffers (in ts packets)"); @@ -220,10 +225,10 @@ void saa7134_irq_ts_done(struct saa7134_dev *dev, unsigned long status) if (dev->ts_q.curr) { field = dev->ts_q.curr->vb.field; if (field == V4L2_FIELD_TOP) { - if ((status & 0x100000) != 0x100000) + if ((status & 0x100000) != 0x000000) goto done; } else { - if ((status & 0x100000) != 0x000000) + if ((status & 0x100000) != 0x100000) goto done; } saa7134_buffer_finish(dev,&dev->ts_q,STATE_DONE); diff --git a/drivers/media/video/saa7134/saa7134-tvaudio.c b/drivers/media/video/saa7134/saa7134-tvaudio.c index 61a2d6b50eef..93268427750d 100644 --- a/drivers/media/video/saa7134/saa7134-tvaudio.c +++ b/drivers/media/video/saa7134/saa7134-tvaudio.c @@ -207,6 +207,10 @@ static void tvaudio_setcarrier(struct saa7134_dev *dev, saa_writel(SAA7134_CARRIER2_FREQ0 >> 2, tvaudio_carr2reg(secondary)); } +#define SAA7134_MUTE_MASK 0xbb +#define SAA7134_MUTE_ANALOG 0x04 +#define SAA7134_MUTE_I2S 0x40 + static void mute_input_7134(struct saa7134_dev *dev) { unsigned int mute; @@ -241,7 +245,11 @@ static void mute_input_7134(struct saa7134_dev *dev) if (PCI_DEVICE_ID_PHILIPS_SAA7134 == dev->pci->device) /* 7134 mute */ - saa_writeb(SAA7134_AUDIO_MUTE_CTRL, mute ? 0xbf : 0xbb); + saa_writeb(SAA7134_AUDIO_MUTE_CTRL, mute ? + SAA7134_MUTE_MASK | + SAA7134_MUTE_ANALOG | + SAA7134_MUTE_I2S : + SAA7134_MUTE_MASK); /* switch internal audio mux */ switch (in->amux) { @@ -753,17 +761,17 @@ static int mute_input_7133(struct saa7134_dev *dev) /* switch gpio-connected external audio mux */ - if (0 != card(dev).gpiomask) { - mask = card(dev).gpiomask; + if (0 != card(dev).gpiomask) { + mask = card(dev).gpiomask; if (card(dev).mute.name && dev->ctl_mute) in = &card(dev).mute; else in = dev->input; - saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, mask, mask); - saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, mask, in->gpio); - saa7134_track_gpio(dev,in->name); + saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, mask, mask); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, mask, in->gpio); + saa7134_track_gpio(dev,in->name); } return 0; @@ -1016,9 +1024,12 @@ int saa7134_tvaudio_do_scan(struct saa7134_dev *dev) return 0; } +EXPORT_SYMBOL(saa_dsp_writel); + /* ----------------------------------------------------------- */ /* * Local variables: * c-basic-offset: 8 * End: */ + diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 35e5e85f669a..45c852df13ed 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -30,6 +30,9 @@ #include "saa7134-reg.h" #include "saa7134.h" +/* Include V4L1 specific functions. Should be removed soon */ +#include <linux/videodev.h> + /* ------------------------------------------------------------------ */ static unsigned int video_debug = 0; @@ -48,6 +51,43 @@ MODULE_PARM_DESC(noninterlaced,"video input is noninterlaced"); printk(KERN_DEBUG "%s/video: " fmt, dev->name , ## arg) /* ------------------------------------------------------------------ */ +/* Defines for Video Output Port Register at address 0x191 */ + +/* Bit 0: VIP code T bit polarity */ + +#define VP_T_CODE_P_NON_INVERTED 0x00 +#define VP_T_CODE_P_INVERTED 0x01 + +/* ------------------------------------------------------------------ */ +/* Defines for Video Output Port Register at address 0x195 */ + +/* Bit 2: Video output clock delay control */ + +#define VP_CLK_CTRL2_NOT_DELAYED 0x00 +#define VP_CLK_CTRL2_DELAYED 0x04 + +/* Bit 1: Video output clock invert control */ + +#define VP_CLK_CTRL1_NON_INVERTED 0x00 +#define VP_CLK_CTRL1_INVERTED 0x02 + +/* ------------------------------------------------------------------ */ +/* Defines for Video Output Port Register at address 0x196 */ + +/* Bits 2 to 0: VSYNC pin video vertical sync type */ + +#define VP_VS_TYPE_MASK 0x07 + +#define VP_VS_TYPE_OFF 0x00 +#define VP_VS_TYPE_V123 0x01 +#define VP_VS_TYPE_V_ITU 0x02 +#define VP_VS_TYPE_VGATE_L 0x03 +#define VP_VS_TYPE_RESERVED1 0x04 +#define VP_VS_TYPE_RESERVED2 0x05 +#define VP_VS_TYPE_F_ITU 0x06 +#define VP_VS_TYPE_SC_FID 0x07 + +/* ------------------------------------------------------------------ */ /* data structs for video */ static int video_out[][9] = { @@ -273,12 +313,12 @@ static struct saa7134_tvnorm tvnorms[] = { .h_start = 0, .h_stop = 719, - .video_v_start = 23, - .video_v_stop = 262, - .vbi_v_start_0 = 10, - .vbi_v_stop_0 = 21, - .vbi_v_start_1 = 273, - .src_timing = 7, + .video_v_start = 23, + .video_v_stop = 262, + .vbi_v_start_0 = 10, + .vbi_v_stop_0 = 21, + .vbi_v_start_1 = 273, + .src_timing = 7, .sync_control = 0x18, .luma_control = 0x40, @@ -622,7 +662,7 @@ static void set_size(struct saa7134_dev *dev, int task, prescale = 1; xscale = 1024 * dev->crop_current.width / prescale / width; yscale = 512 * div * dev->crop_current.height / height; - dprintk("prescale=%d xscale=%d yscale=%d\n",prescale,xscale,yscale); + dprintk("prescale=%d xscale=%d yscale=%d\n",prescale,xscale,yscale); set_h_prescale(dev,task,prescale); saa_writeb(SAA7134_H_SCALE_INC1(task), xscale & 0xff); saa_writeb(SAA7134_H_SCALE_INC2(task), xscale >> 8); @@ -752,20 +792,20 @@ static int verify_preview(struct saa7134_dev *dev, struct v4l2_window *win) maxh = dev->crop_current.height; if (V4L2_FIELD_ANY == field) { - field = (win->w.height > maxh/2) - ? V4L2_FIELD_INTERLACED - : V4L2_FIELD_TOP; - } - switch (field) { - case V4L2_FIELD_TOP: - case V4L2_FIELD_BOTTOM: - maxh = maxh / 2; - break; - case V4L2_FIELD_INTERLACED: - break; - default: - return -EINVAL; - } + field = (win->w.height > maxh/2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_TOP; + } + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + maxh = maxh / 2; + break; + case V4L2_FIELD_INTERLACED: + break; + default: + return -EINVAL; + } win->field = field; if (win->w.width > maxw) @@ -1306,13 +1346,13 @@ video_poll(struct file *file, struct poll_table_struct *wait) if (res_locked(fh->dev,RESOURCE_VIDEO)) { up(&fh->cap.lock); return POLLERR; - } - if (0 != fh->cap.ops->buf_prepare(&fh->cap,fh->cap.read_buf,fh->cap.field)) { - up(&fh->cap.lock); - return POLLERR; - } - fh->cap.ops->buf_queue(&fh->cap,fh->cap.read_buf); - fh->cap.read_off = 0; + } + if (0 != fh->cap.ops->buf_prepare(&fh->cap,fh->cap.read_buf,fh->cap.field)) { + up(&fh->cap.lock); + return POLLERR; + } + fh->cap.ops->buf_queue(&fh->cap,fh->cap.read_buf); + fh->cap.read_off = 0; } up(&fh->cap.lock); buf = fh->cap.read_buf; @@ -1666,9 +1706,10 @@ static int video_do_ioctl(struct inode *inode, struct file *file, case VIDIOC_QUERYCAP: { struct v4l2_capability *cap = arg; + unsigned int tuner_type = dev->tuner_type; memset(cap,0,sizeof(*cap)); - strcpy(cap->driver, "saa7134"); + strcpy(cap->driver, "saa7134"); strlcpy(cap->card, saa7134_boards[dev->board].name, sizeof(cap->card)); sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci)); @@ -1677,9 +1718,13 @@ static int video_do_ioctl(struct inode *inode, struct file *file, V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY | V4L2_CAP_VBI_CAPTURE | - V4L2_CAP_TUNER | V4L2_CAP_READWRITE | - V4L2_CAP_STREAMING; + V4L2_CAP_STREAMING | + V4L2_CAP_TUNER; + + if ((tuner_type == TUNER_ABSENT) || (tuner_type == UNSET)) + cap->capabilities &= ~V4L2_CAP_TUNER; + return 0; } @@ -1793,9 +1838,9 @@ static int video_do_ioctl(struct inode *inode, struct file *file, crop->c.height = b->top - crop->c.top + b->height; if (crop->c.left < b->left) - crop->c.top = b->left; + crop->c.left = b->left; if (crop->c.left > b->left + b->width) - crop->c.top = b->left + b->width; + crop->c.left = b->left + b->width; if (crop->c.width > b->left - crop->c.left + b->width) crop->c.width = b->left - crop->c.left + b->width; @@ -1817,6 +1862,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, break; if (NULL != card_in(dev,n).name) { strcpy(t->name, "Television"); + t->type = V4L2_TUNER_ANALOG_TV; t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | @@ -1892,26 +1938,26 @@ static int video_do_ioctl(struct inode *inode, struct file *file, } case VIDIOC_S_AUDIO: return 0; - case VIDIOC_G_PARM: - { - struct v4l2_captureparm *parm = arg; - memset(parm,0,sizeof(*parm)); - return 0; - } - - case VIDIOC_G_PRIORITY: - { - enum v4l2_priority *p = arg; - - *p = v4l2_prio_max(&dev->prio); - return 0; - } - case VIDIOC_S_PRIORITY: - { - enum v4l2_priority *prio = arg; - - return v4l2_prio_change(&dev->prio, &fh->prio, *prio); - } + case VIDIOC_G_PARM: + { + struct v4l2_captureparm *parm = arg; + memset(parm,0,sizeof(*parm)); + return 0; + } + + case VIDIOC_G_PRIORITY: + { + enum v4l2_priority *p = arg; + + *p = v4l2_prio_max(&dev->prio); + return 0; + } + case VIDIOC_S_PRIORITY: + { + enum v4l2_priority *prio = arg; + + return v4l2_prio_change(&dev->prio, &fh->prio, *prio); + } /* --- preview ioctls ---------------------------------------- */ case VIDIOC_ENUM_FMT: @@ -2018,7 +2064,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, struct v4l2_format *f = arg; return saa7134_try_fmt(dev,fh,f); } - +#ifdef HAVE_V4L1 case VIDIOCGMBUF: { struct video_mbuf *mbuf = arg; @@ -2043,6 +2089,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, } return 0; } +#endif case VIDIOC_REQBUFS: return videobuf_reqbufs(saa7134_queue(fh),arg); @@ -2060,7 +2107,7 @@ static int video_do_ioctl(struct inode *inode, struct file *file, { int res = saa7134_resource(fh); - if (!res_get(dev,fh,res)) + if (!res_get(dev,fh,res)) return -EBUSY; return videobuf_streamon(saa7134_queue(fh)); } @@ -2102,7 +2149,7 @@ static int radio_do_ioctl(struct inode *inode, struct file *file, struct v4l2_capability *cap = arg; memset(cap,0,sizeof(*cap)); - strcpy(cap->driver, "saa7134"); + strcpy(cap->driver, "saa7134"); strlcpy(cap->card, saa7134_boards[dev->board].name, sizeof(cap->card)); sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci)); @@ -2119,6 +2166,7 @@ static int radio_do_ioctl(struct inode *inode, struct file *file, memset(t,0,sizeof(*t)); strcpy(t->name, "Radio"); + t->type = V4L2_TUNER_RADIO; saa7134_i2c_call_clients(dev, VIDIOC_G_TUNER, t); @@ -2233,7 +2281,7 @@ struct video_device saa7134_video_template = { .name = "saa7134-video", .type = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_OVERLAY| - VID_TYPE_CLIPPING|VID_TYPE_SCALES, + VID_TYPE_CLIPPING|VID_TYPE_SCALES, .hardware = 0, .fops = &video_fops, .minor = -1, @@ -2280,7 +2328,7 @@ int saa7134_video_init1(struct saa7134_dev *dev) dev->tda9887_conf |= TDA9887_AUTOMUTE; dev->automute = 0; - INIT_LIST_HEAD(&dev->video_q.queue); + INIT_LIST_HEAD(&dev->video_q.queue); init_timer(&dev->video_q.timeout); dev->video_q.timeout.function = saa7134_buffer_timeout; dev->video_q.timeout.data = (unsigned long)(&dev->video_q); @@ -2289,13 +2337,28 @@ int saa7134_video_init1(struct saa7134_dev *dev) if (saa7134_boards[dev->board].video_out) { /* enable video output */ int vo = saa7134_boards[dev->board].video_out; + int video_reg; + unsigned int vid_port_opts = saa7134_boards[dev->board].vid_port_opts; saa_writeb(SAA7134_VIDEO_PORT_CTRL0, video_out[vo][0]); - saa_writeb(SAA7134_VIDEO_PORT_CTRL1, video_out[vo][1]); + video_reg = video_out[vo][1]; + if (vid_port_opts & SET_T_CODE_POLARITY_NON_INVERTED) + video_reg &= ~VP_T_CODE_P_INVERTED; + saa_writeb(SAA7134_VIDEO_PORT_CTRL1, video_reg); saa_writeb(SAA7134_VIDEO_PORT_CTRL2, video_out[vo][2]); saa_writeb(SAA7134_VIDEO_PORT_CTRL3, video_out[vo][3]); saa_writeb(SAA7134_VIDEO_PORT_CTRL4, video_out[vo][4]); - saa_writeb(SAA7134_VIDEO_PORT_CTRL5, video_out[vo][5]); - saa_writeb(SAA7134_VIDEO_PORT_CTRL6, video_out[vo][6]); + video_reg = video_out[vo][5]; + if (vid_port_opts & SET_CLOCK_NOT_DELAYED) + video_reg &= ~VP_CLK_CTRL2_DELAYED; + if (vid_port_opts & SET_CLOCK_INVERTED) + video_reg |= VP_CLK_CTRL1_INVERTED; + saa_writeb(SAA7134_VIDEO_PORT_CTRL5, video_reg); + video_reg = video_out[vo][6]; + if (vid_port_opts & SET_VSYNC_OFF) { + video_reg &= ~VP_VS_TYPE_MASK; + video_reg |= VP_VS_TYPE_OFF; + } + saa_writeb(SAA7134_VIDEO_PORT_CTRL6, video_reg); saa_writeb(SAA7134_VIDEO_PORT_CTRL7, video_out[vo][7]); saa_writeb(SAA7134_VIDEO_PORT_CTRL8, video_out[vo][8]); } diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 860b89530e2a..fb9727471661 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -24,16 +24,18 @@ #include <linux/pci.h> #include <linux/i2c.h> -#include <linux/videodev.h> +#include <linux/videodev2.h> #include <linux/kdev_t.h> #include <linux/input.h> +#include <linux/notifier.h> +#include <linux/delay.h> #include <asm/io.h> #include <media/tuner.h> #include <media/audiochip.h> -#include <media/id.h> #include <media/ir-common.h> +#include <media/ir-kbd-i2c.h> #include <media/video-buf.h> #include <media/video-buf-dvb.h> @@ -45,6 +47,10 @@ #endif #define UNSET (-1U) +#include <sound/driver.h> +#include <sound/core.h> +#include <sound/pcm.h> + /* ----------------------------------------------------------- */ /* enums */ @@ -187,10 +193,39 @@ struct saa7134_format { #define SAA7134_BOARD_FLYTV_DIGIMATRIX 64 #define SAA7134_BOARD_KWORLD_TERMINATOR 65 #define SAA7134_BOARD_YUAN_TUN900 66 +#define SAA7134_BOARD_BEHOLD_409FM 67 +#define SAA7134_BOARD_GOTVIEW_7135 68 +#define SAA7134_BOARD_PHILIPS_EUROPA 69 +#define SAA7134_BOARD_VIDEOMATE_DVBT_300 70 +#define SAA7134_BOARD_VIDEOMATE_DVBT_200 71 +#define SAA7134_BOARD_RTD_VFG7350 72 +#define SAA7134_BOARD_RTD_VFG7330 73 +#define SAA7134_BOARD_FLYTVPLATINUM_MINI2 74 +#define SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180 75 +#define SAA7134_BOARD_MONSTERTV_MOBILE 76 +#define SAA7134_BOARD_PINNACLE_PCTV_110i 77 +#define SAA7134_BOARD_ASUSTeK_P7131_DUAL 78 +#define SAA7134_BOARD_SEDNA_PC_TV_CARDBUS 79 +#define SAA7134_BOARD_ASUSTEK_DIGIMATRIX_TV 80 +#define SAA7134_BOARD_PHILIPS_TIGER 81 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 +/* ----------------------------------------------------------- */ +/* Since we support 2 remote types, lets tell them apart */ + +#define SAA7134_REMOTE_GPIO 1 +#define SAA7134_REMOTE_I2C 2 + +/* ----------------------------------------------------------- */ +/* Video Output Port Register Initialization Options */ + +#define SET_T_CODE_POLARITY_NON_INVERTED (1 << 0) +#define SET_CLOCK_NOT_DELAYED (1 << 1) +#define SET_CLOCK_INVERTED (1 << 2) +#define SET_VSYNC_OFF (1 << 3) + struct saa7134_input { char *name; unsigned int vmux; @@ -226,6 +261,7 @@ struct saa7134_board { /* peripheral I/O */ enum saa7134_video_out video_out; enum saa7134_mpeg_type mpeg; + unsigned int vid_port_opts; }; #define card_has_radio(dev) (NULL != saa7134_boards[dev->board].radio.name) @@ -319,9 +355,9 @@ struct saa7134_fh { struct saa7134_pgtable pt_vbi; }; -/* oss dsp status */ -struct saa7134_oss { - struct semaphore lock; +/* dmasound dsp status */ +struct saa7134_dmasound { + struct semaphore lock; int minor_mixer; int minor_dsp; unsigned int users_dsp; @@ -347,6 +383,7 @@ struct saa7134_oss { unsigned int dma_blk; unsigned int read_offset; unsigned int read_count; + snd_pcm_substream_t *substream; }; /* IR input */ @@ -358,9 +395,9 @@ struct saa7134_ir { u32 mask_keycode; u32 mask_keydown; u32 mask_keyup; - int polling; - u32 last_gpio; - struct timer_list timer; + int polling; + u32 last_gpio; + struct timer_list timer; }; /* ts/mpeg status */ @@ -383,8 +420,8 @@ struct saa7134_mpeg_ops { /* global device status */ struct saa7134_dev { struct list_head devlist; - struct semaphore lock; - spinlock_t slock; + struct semaphore lock; + spinlock_t slock; #ifdef VIDIOC_G_PRIORITY struct v4l2_prio_state prio; #endif @@ -394,7 +431,7 @@ struct saa7134_dev { struct video_device *video_dev; struct video_device *radio_dev; struct video_device *vbi_dev; - struct saa7134_oss oss; + struct saa7134_dmasound dmasound; /* infrared remote */ int has_remote; @@ -421,7 +458,7 @@ struct saa7134_dev { /* i2c i/o */ struct i2c_adapter i2c_adap; struct i2c_client i2c_client; - unsigned char eedata[64]; + unsigned char eedata[128]; /* video overlay */ struct v4l2_framebuffer ovbuf; @@ -626,6 +663,7 @@ void saa7134_irq_oss_done(struct saa7134_dev *dev, unsigned long status); int saa7134_input_init1(struct saa7134_dev *dev); void saa7134_input_fini(struct saa7134_dev *dev); void saa7134_input_irq(struct saa7134_dev *dev); +void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir); /* * Local variables: diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c index 255b6088ebf9..d32737dd2142 100644 --- a/drivers/media/video/tda7432.c +++ b/drivers/media/video/tda7432.c @@ -50,7 +50,6 @@ #include "bttv.h" #include <media/audiochip.h> -#include <media/id.h> #ifndef VIDEO_AUDIO_BALANCE # define VIDEO_AUDIO_BALANCE 32 @@ -310,9 +309,9 @@ static int tda7432_attach(struct i2c_adapter *adap, int addr, int kind) memset(t,0,sizeof *t); client = &t->c; - memcpy(client,&client_template,sizeof(struct i2c_client)); - client->adapter = adap; - client->addr = addr; + memcpy(client,&client_template,sizeof(struct i2c_client)); + client->adapter = adap; + client->addr = addr; i2c_set_clientdata(client, t); do_tda7432_init(client); @@ -472,7 +471,7 @@ static int tda7432_command(struct i2c_client *client, } } - t->muted=(va->flags & VIDEO_AUDIO_MUTE); + t->muted=(va->flags & VIDEO_AUDIO_MUTE); if (t->muted) { /* Mute & update balance*/ @@ -503,12 +502,12 @@ static int tda7432_command(struct i2c_client *client, static struct i2c_driver driver = { .owner = THIS_MODULE, - .name = "i2c tda7432 driver", + .name = "i2c tda7432 driver", .id = I2C_DRIVERID_TDA7432, - .flags = I2C_DF_NOTIFY, + .flags = I2C_DF_NOTIFY, .attach_adapter = tda7432_probe, - .detach_client = tda7432_detach, - .command = tda7432_command, + .detach_client = tda7432_detach, + .command = tda7432_command, }; static struct i2c_client client_template = diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index c65f0c7680a2..b2dfe07e9f9d 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -1,172 +1,406 @@ /* - * - * i2c tv tuner chip device driver - * controls the philips tda8290+75 tuner chip combo. - */ + + i2c tv tuner chip device driver + controls the philips tda8290+75 tuner chip combo. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + #include <linux/i2c.h> #include <linux/videodev.h> #include <linux/delay.h> #include <media/tuner.h> -#define I2C_ADDR_TDA8290 0x4b -#define I2C_ADDR_TDA8275 0x61 - /* ---------------------------------------------------------------------- */ -struct freq_entry { - u16 freq; - u8 value; +struct tda827x_data { + u32 lomax; + u8 spd; + u8 bs; + u8 bp; + u8 cp; + u8 gc3; + u8 div1p5; }; -static struct freq_entry band_table[] = { - { 0x2DF4, 0x1C }, - { 0x2574, 0x14 }, - { 0x22B4, 0x0C }, - { 0x20D4, 0x0B }, - { 0x1E74, 0x3B }, - { 0x1C34, 0x33 }, - { 0x16F4, 0x5B }, - { 0x1454, 0x53 }, - { 0x12D4, 0x52 }, - { 0x1034, 0x4A }, - { 0x0EE4, 0x7A }, - { 0x0D34, 0x72 }, - { 0x0B54, 0x9A }, - { 0x0914, 0x91 }, - { 0x07F4, 0x89 }, - { 0x0774, 0xB9 }, - { 0x067B, 0xB1 }, - { 0x0634, 0xD9 }, - { 0x05A4, 0xD8 }, // FM radio - { 0x0494, 0xD0 }, - { 0x03BC, 0xC8 }, - { 0x0394, 0xF8 }, // 57250000 Hz - { 0x0000, 0xF0 }, // 0 + /* Note lomax entry is lo / 62500 */ + +static struct tda827x_data tda827x_analog[] = { + { .lomax = 992, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 1}, /* 62 MHz */ + { .lomax = 1056, .spd = 3, .bs = 3, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 1}, /* 66 MHz */ + { .lomax = 1216, .spd = 3, .bs = 1, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 0}, /* 76 MHz */ + { .lomax = 1344, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 0}, /* 84 MHz */ + { .lomax = 1488, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 1, .div1p5 = 0}, /* 93 MHz */ + { .lomax = 1568, .spd = 3, .bs = 3, .bp = 0, .cp = 0, .gc3 = 1, .div1p5 = 0}, /* 98 MHz */ + { .lomax = 1744, .spd = 3, .bs = 3, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0}, /* 109 MHz */ + { .lomax = 1968, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 1}, /* 123 MHz */ + { .lomax = 2128, .spd = 2, .bs = 3, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 1}, /* 133 MHz */ + { .lomax = 2416, .spd = 2, .bs = 1, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0}, /* 151 MHz */ + { .lomax = 2464, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0}, /* 154 MHz */ + { .lomax = 2896, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 0, .div1p5 = 0}, /* 181 MHz */ + { .lomax = 2960, .spd = 2, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0}, /* 185 MHz */ + { .lomax = 3472, .spd = 2, .bs = 3, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0}, /* 217 MHz */ + { .lomax = 3904, .spd = 1, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 1}, /* 244 MHz */ + { .lomax = 4240, .spd = 1, .bs = 3, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 1}, /* 265 MHz */ + { .lomax = 4832, .spd = 1, .bs = 1, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0}, /* 302 MHz */ + { .lomax = 5184, .spd = 1, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0}, /* 324 MHz */ + { .lomax = 5920, .spd = 1, .bs = 2, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0}, /* 370 MHz */ + { .lomax = 7264, .spd = 1, .bs = 3, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0}, /* 454 MHz */ + { .lomax = 7888, .spd = 0, .bs = 2, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 1}, /* 493 MHz */ + { .lomax = 8480, .spd = 0, .bs = 3, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 1}, /* 530 MHz */ + { .lomax = 8864, .spd = 0, .bs = 1, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0}, /* 554 MHz */ + { .lomax = 9664, .spd = 0, .bs = 1, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0}, /* 604 MHz */ + { .lomax = 11088, .spd = 0, .bs = 2, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0}, /* 696 MHz */ + { .lomax = 11840, .spd = 0, .bs = 2, .bp = 4, .cp = 1, .gc3 = 0, .div1p5 = 0}, /* 740 MHz */ + { .lomax = 13120, .spd = 0, .bs = 3, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0}, /* 820 MHz */ + { .lomax = 13840, .spd = 0, .bs = 3, .bp = 4, .cp = 1, .gc3 = 0, .div1p5 = 0}, /* 865 MHz */ + { .lomax = 0, .spd = 0, .bs = 0, .bp = 0, .cp = 0, .gc3 = 0, .div1p5 = 0} /* End */ }; -static struct freq_entry div_table[] = { - { 0x1C34, 3 }, - { 0x0D34, 2 }, - { 0x067B, 1 }, - { 0x0000, 0 }, -}; +static void tda827x_tune(struct i2c_client *c, u16 ifc, unsigned int freq) +{ + unsigned char tuner_reg[8]; + unsigned char reg2[2]; + u32 N; + int i; + struct tuner *t = i2c_get_clientdata(c); + struct i2c_msg msg = {.addr = t->tda827x_addr, .flags = 0}; -static struct freq_entry agc_table[] = { - { 0x22B4, 0x8F }, - { 0x0B54, 0x9F }, - { 0x09A4, 0x8F }, - { 0x0554, 0x9F }, - { 0x0000, 0xBF }, -}; + if (t->mode == V4L2_TUNER_RADIO) + freq = freq / 1000; -static __u8 get_freq_entry( struct freq_entry* table, __u16 freq) -{ - while(table->freq && table->freq > freq) - table++; - return table->value; -} + N = freq + ifc; + i = 0; + while (tda827x_analog[i].lomax < N) { + if(tda827x_analog[i + 1].lomax == 0) + break; + i++; + } + + N = N << tda827x_analog[i].spd; + + tuner_reg[0] = 0; + tuner_reg[1] = (unsigned char)(N>>8); + tuner_reg[2] = (unsigned char) N; + tuner_reg[3] = 0x40; + tuner_reg[4] = 0x52 + (t->tda827x_lpsel << 5); + tuner_reg[5] = (tda827x_analog[i].spd << 6) + (tda827x_analog[i].div1p5 <<5) + + (tda827x_analog[i].bs <<3) + tda827x_analog[i].bp; + tuner_reg[6] = 0x8f + (tda827x_analog[i].gc3 << 4); + tuner_reg[7] = 0x8f; + + msg.buf = tuner_reg; + msg.len = 8; + i2c_transfer(c->adapter, &msg, 1); + + msg.buf= reg2; + msg.len = 2; + reg2[0] = 0x80; + reg2[1] = 0; + i2c_transfer(c->adapter, &msg, 1); + + reg2[0] = 0x60; + reg2[1] = 0xbf; + i2c_transfer(c->adapter, &msg, 1); + + reg2[0] = 0x30; + reg2[1] = tuner_reg[4] + 0x80; + i2c_transfer(c->adapter, &msg, 1); + + msleep(1); + reg2[0] = 0x30; + reg2[1] = tuner_reg[4] + 4; + i2c_transfer(c->adapter, &msg, 1); + + msleep(1); + reg2[0] = 0x30; + reg2[1] = tuner_reg[4]; + i2c_transfer(c->adapter, &msg, 1); -/* ---------------------------------------------------------------------- */ + msleep(550); + reg2[0] = 0x30; + reg2[1] = (tuner_reg[4] & 0xfc) + tda827x_analog[i].cp ; + i2c_transfer(c->adapter, &msg, 1); -static unsigned char i2c_enable_bridge[2] = { 0x21, 0xC0 }; -static unsigned char i2c_disable_bridge[2] = { 0x21, 0x80 }; -static unsigned char i2c_init_tda8275[14] = { 0x00, 0x00, 0x00, 0x00, - 0xfC, 0x04, 0xA3, 0x3F, - 0x2A, 0x04, 0xFF, 0x00, - 0x00, 0x40 }; -static unsigned char i2c_set_VS[2] = { 0x30, 0x6F }; -static unsigned char i2c_set_GP01_CF[2] = { 0x20, 0x0B }; -static unsigned char i2c_tda8290_reset[2] = { 0x00, 0x00 }; -static unsigned char i2c_tda8290_standby[2] = { 0x00, 0x02 }; -static unsigned char i2c_gainset_off[2] = { 0x28, 0x14 }; -static unsigned char i2c_gainset_on[2] = { 0x28, 0x54 }; -static unsigned char i2c_agc3_00[2] = { 0x80, 0x00 }; -static unsigned char i2c_agc2_BF[2] = { 0x60, 0xBF }; -static unsigned char i2c_cb1_D0[2] = { 0x30, 0xD0 }; -static unsigned char i2c_cb1_D2[2] = { 0x30, 0xD2 }; -static unsigned char i2c_cb1_56[2] = { 0x30, 0x56 }; -static unsigned char i2c_cb1_52[2] = { 0x30, 0x52 }; -static unsigned char i2c_cb1_50[2] = { 0x30, 0x50 }; -static unsigned char i2c_agc2_7F[2] = { 0x60, 0x7F }; -static unsigned char i2c_agc3_08[2] = { 0x80, 0x08 }; - -static struct i2c_msg i2c_msg_init[] = { - { I2C_ADDR_TDA8275, 0, ARRAY_SIZE(i2c_init_tda8275), i2c_init_tda8275 }, - { I2C_ADDR_TDA8290, 0, ARRAY_SIZE(i2c_disable_bridge), i2c_disable_bridge }, - { I2C_ADDR_TDA8290, 0, ARRAY_SIZE(i2c_set_VS), i2c_set_VS }, - { I2C_ADDR_TDA8290, 0, ARRAY_SIZE(i2c_set_GP01_CF), i2c_set_GP01_CF }, -}; + reg2[0] = 0x60; + reg2[1] = 0x3f; + i2c_transfer(c->adapter, &msg, 1); -static struct i2c_msg i2c_msg_prolog[] = { -// { I2C_ADDR_TDA8290, 0, ARRAY_SIZE(i2c_easy_mode), i2c_easy_mode }, - { I2C_ADDR_TDA8290, 0, ARRAY_SIZE(i2c_gainset_off), i2c_gainset_off }, - { I2C_ADDR_TDA8290, 0, ARRAY_SIZE(i2c_tda8290_reset), i2c_tda8290_reset }, - { I2C_ADDR_TDA8290, 0, ARRAY_SIZE(i2c_enable_bridge), i2c_enable_bridge }, -}; + reg2[0] = 0x80; + reg2[1] = 0x08; // Vsync en + i2c_transfer(c->adapter, &msg, 1); +} -static struct i2c_msg i2c_msg_config[] = { -// { I2C_ADDR_TDA8275, 0, ARRAY_SIZE(i2c_set_freq), i2c_set_freq }, - { I2C_ADDR_TDA8275, 0, ARRAY_SIZE(i2c_agc3_00), i2c_agc3_00 }, - { I2C_ADDR_TDA8275, 0, ARRAY_SIZE(i2c_agc2_BF), i2c_agc2_BF }, - { I2C_ADDR_TDA8275, 0, ARRAY_SIZE(i2c_cb1_D2), i2c_cb1_D2 }, - { I2C_ADDR_TDA8275, 0, ARRAY_SIZE(i2c_cb1_56), i2c_cb1_56 }, - { I2C_ADDR_TDA8275, 0, ARRAY_SIZE(i2c_cb1_52), i2c_cb1_52 }, -}; +static void tda827x_agcf(struct i2c_client *c) +{ + struct tuner *t = i2c_get_clientdata(c); + unsigned char data[] = {0x80, 0x0c}; + struct i2c_msg msg = {.addr = t->tda827x_addr, .buf = data, + .flags = 0, .len = 2}; + i2c_transfer(c->adapter, &msg, 1); +} -static struct i2c_msg i2c_msg_epilog[] = { - { I2C_ADDR_TDA8275, 0, ARRAY_SIZE(i2c_cb1_50), i2c_cb1_50 }, - { I2C_ADDR_TDA8275, 0, ARRAY_SIZE(i2c_agc2_7F), i2c_agc2_7F }, - { I2C_ADDR_TDA8275, 0, ARRAY_SIZE(i2c_agc3_08), i2c_agc3_08 }, - { I2C_ADDR_TDA8290, 0, ARRAY_SIZE(i2c_disable_bridge), i2c_disable_bridge }, - { I2C_ADDR_TDA8290, 0, ARRAY_SIZE(i2c_gainset_on), i2c_gainset_on }, +/* ---------------------------------------------------------------------- */ + +struct tda827xa_data { + u32 lomax; + u8 svco; + u8 spd; + u8 scr; + u8 sbs; + u8 gc3; }; -static struct i2c_msg i2c_msg_standby[] = { - { I2C_ADDR_TDA8290, 0, ARRAY_SIZE(i2c_enable_bridge), i2c_enable_bridge }, - { I2C_ADDR_TDA8275, 0, ARRAY_SIZE(i2c_cb1_D0), i2c_cb1_D0 }, - { I2C_ADDR_TDA8290, 0, ARRAY_SIZE(i2c_disable_bridge), i2c_disable_bridge }, - { I2C_ADDR_TDA8290, 0, ARRAY_SIZE(i2c_tda8290_standby), i2c_tda8290_standby }, +static struct tda827xa_data tda827xa_analog[] = { + { .lomax = 910, .svco = 3, .spd = 4, .scr = 0, .sbs = 0, .gc3 = 3}, /* 56.875 MHz */ + { .lomax = 1076, .svco = 0, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 3}, /* 67.25 MHz */ + { .lomax = 1300, .svco = 1, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 3}, /* 81.25 MHz */ + { .lomax = 1560, .svco = 2, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 3}, /* 97.5 MHz */ + { .lomax = 1820, .svco = 3, .spd = 3, .scr = 0, .sbs = 1, .gc3 = 1}, /* 113.75 MHz */ + { .lomax = 2152, .svco = 0, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1}, /* 134.5 MHz */ + { .lomax = 2464, .svco = 1, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1}, /* 154 MHz */ + { .lomax = 2600, .svco = 1, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1}, /* 162.5 MHz */ + { .lomax = 2928, .svco = 2, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1}, /* 183 MHz */ + { .lomax = 3120, .svco = 2, .spd = 2, .scr = 0, .sbs = 2, .gc3 = 1}, /* 195 MHz */ + { .lomax = 3640, .svco = 3, .spd = 2, .scr = 0, .sbs = 2, .gc3 = 3}, /* 227.5 MHz */ + { .lomax = 4304, .svco = 0, .spd = 1, .scr = 0, .sbs = 2, .gc3 = 3}, /* 269 MHz */ + { .lomax = 5200, .svco = 1, .spd = 1, .scr = 0, .sbs = 2, .gc3 = 1}, /* 325 MHz */ + { .lomax = 6240, .svco = 2, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 3}, /* 390 MHz */ + { .lomax = 7280, .svco = 3, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 3}, /* 455 MHz */ + { .lomax = 8320, .svco = 0, .spd = 0, .scr = 0, .sbs = 3, .gc3 = 1}, /* 520 MHz */ + { .lomax = 8608, .svco = 0, .spd = 0, .scr = 1, .sbs = 3, .gc3 = 1}, /* 538 MHz */ + { .lomax = 8864, .svco = 1, .spd = 0, .scr = 0, .sbs = 3, .gc3 = 1}, /* 554 MHz */ + { .lomax = 9920, .svco = 1, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0}, /* 620 MHz */ + { .lomax = 10400, .svco = 1, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0}, /* 650 MHz */ + { .lomax = 11200, .svco = 2, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0}, /* 700 MHz */ + { .lomax = 12480, .svco = 2, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0}, /* 780 MHz */ + { .lomax = 13120, .svco = 3, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0}, /* 820 MHz */ + { .lomax = 13920, .svco = 3, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0}, /* 870 MHz */ + { .lomax = 14576, .svco = 3, .spd = 0, .scr = 2, .sbs = 4, .gc3 = 0}, /* 911 MHz */ + { .lomax = 0, .svco = 0, .spd = 0, .scr = 0, .sbs = 0, .gc3 = 0} /* End */ }; -static int tda8290_tune(struct i2c_client *c) +static void tda827xa_tune(struct i2c_client *c, u16 ifc, unsigned int freq) { + unsigned char tuner_reg[14]; + unsigned char reg2[2]; + u32 N; + int i; struct tuner *t = i2c_get_clientdata(c); - struct i2c_msg easy_mode = - { I2C_ADDR_TDA8290, 0, 2, t->i2c_easy_mode }; - struct i2c_msg set_freq = - { I2C_ADDR_TDA8275, 0, 8, t->i2c_set_freq }; + struct i2c_msg msg = {.addr = t->tda827x_addr, .flags = 0}; - i2c_transfer(c->adapter, &easy_mode, 1); - i2c_transfer(c->adapter, i2c_msg_prolog, ARRAY_SIZE(i2c_msg_prolog)); + if (t->mode == V4L2_TUNER_RADIO) + freq = freq / 1000; - i2c_transfer(c->adapter, &set_freq, 1); - i2c_transfer(c->adapter, i2c_msg_config, ARRAY_SIZE(i2c_msg_config)); + N = freq + ifc; + i = 0; + while (tda827xa_analog[i].lomax < N) { + if(tda827xa_analog[i + 1].lomax == 0) + break; + i++; + } + + N = N << tda827xa_analog[i].spd; + + tuner_reg[0] = 0; + tuner_reg[1] = (unsigned char)(N>>8); + tuner_reg[2] = (unsigned char) N; + tuner_reg[3] = 0; + tuner_reg[4] = 0x16; + tuner_reg[5] = (tda827xa_analog[i].spd << 5) + (tda827xa_analog[i].svco << 3) + + tda827xa_analog[i].sbs; + tuner_reg[6] = 0x8b + (tda827xa_analog[i].gc3 << 4); + tuner_reg[7] = 0x0c; + tuner_reg[8] = 4; + tuner_reg[9] = 0x20; + tuner_reg[10] = 0xff; + tuner_reg[11] = 0xe0; + tuner_reg[12] = 0; + tuner_reg[13] = 0x39 + (t->tda827x_lpsel << 1); + + msg.buf = tuner_reg; + msg.len = 14; + i2c_transfer(c->adapter, &msg, 1); + + msg.buf= reg2; + msg.len = 2; + reg2[0] = 0x60; + reg2[1] = 0x3c; + i2c_transfer(c->adapter, &msg, 1); + + reg2[0] = 0xa0; + reg2[1] = 0xc0; + i2c_transfer(c->adapter, &msg, 1); + + msleep(2); + reg2[0] = 0x30; + reg2[1] = 0x10 + tda827xa_analog[i].scr; + i2c_transfer(c->adapter, &msg, 1); msleep(550); - i2c_transfer(c->adapter, i2c_msg_epilog, ARRAY_SIZE(i2c_msg_epilog)); - return 0; + reg2[0] = 0x50; + reg2[1] = 0x8f + (tda827xa_analog[i].gc3 << 4); + i2c_transfer(c->adapter, &msg, 1); + + reg2[0] = 0x80; + reg2[1] = 0x28; + i2c_transfer(c->adapter, &msg, 1); + + reg2[0] = 0xb0; + reg2[1] = 0x01; + i2c_transfer(c->adapter, &msg, 1); + + reg2[0] = 0xc0; + reg2[1] = 0x19 + (t->tda827x_lpsel << 1); + i2c_transfer(c->adapter, &msg, 1); } -static void set_frequency(struct tuner *t, u16 ifc, unsigned int freq) +static void tda827xa_agcf(struct i2c_client *c) { - u32 N; + struct tuner *t = i2c_get_clientdata(c); + unsigned char data[] = {0x80, 0x2c}; + struct i2c_msg msg = {.addr = t->tda827x_addr, .buf = data, + .flags = 0, .len = 2}; + i2c_transfer(c->adapter, &msg, 1); +} - if (t->mode == V4L2_TUNER_RADIO) - freq = freq / 1000; +/*---------------------------------------------------------------------*/ - N = (((freq<<3)+ifc)&0x3fffc); - - N = N >> get_freq_entry(div_table, freq); - t->i2c_set_freq[0] = 0; - t->i2c_set_freq[1] = (unsigned char)(N>>8); - t->i2c_set_freq[2] = (unsigned char) N; - t->i2c_set_freq[3] = 0x40; - t->i2c_set_freq[4] = 0x52; - t->i2c_set_freq[5] = get_freq_entry(band_table, freq); - t->i2c_set_freq[6] = get_freq_entry(agc_table, freq); - t->i2c_set_freq[7] = 0x8f; +static void tda8290_i2c_bridge(struct i2c_client *c, int close) +{ + unsigned char enable[2] = { 0x21, 0xC0 }; + unsigned char disable[2] = { 0x21, 0x80 }; + unsigned char *msg; + if(close) { + msg = enable; + i2c_master_send(c, msg, 2); + /* let the bridge stabilize */ + msleep(20); + } else { + msg = disable; + i2c_master_send(c, msg, 2); + } } +/*---------------------------------------------------------------------*/ + +static int tda8290_tune(struct i2c_client *c, u16 ifc, unsigned int freq) +{ + struct tuner *t = i2c_get_clientdata(c); + unsigned char soft_reset[] = { 0x00, 0x00 }; + unsigned char easy_mode[] = { 0x01, t->tda8290_easy_mode }; + unsigned char expert_mode[] = { 0x01, 0x80 }; + unsigned char gainset_off[] = { 0x28, 0x14 }; + unsigned char if_agc_spd[] = { 0x0f, 0x88 }; + unsigned char adc_head_6[] = { 0x05, 0x04 }; + unsigned char adc_head_9[] = { 0x05, 0x02 }; + unsigned char adc_head_12[] = { 0x05, 0x01 }; + unsigned char pll_bw_nom[] = { 0x0d, 0x47 }; + unsigned char pll_bw_low[] = { 0x0d, 0x27 }; + unsigned char gainset_2[] = { 0x28, 0x64 }; + unsigned char agc_rst_on[] = { 0x0e, 0x0b }; + unsigned char agc_rst_off[] = { 0x0e, 0x09 }; + unsigned char if_agc_set[] = { 0x0f, 0x81 }; + unsigned char addr_adc_sat = 0x1a; + unsigned char addr_agc_stat = 0x1d; + unsigned char addr_pll_stat = 0x1b; + unsigned char adc_sat, agc_stat, + pll_stat; + + i2c_master_send(c, easy_mode, 2); + i2c_master_send(c, soft_reset, 2); + msleep(1); + + expert_mode[1] = t->tda8290_easy_mode + 0x80; + i2c_master_send(c, expert_mode, 2); + i2c_master_send(c, gainset_off, 2); + i2c_master_send(c, if_agc_spd, 2); + if (t->tda8290_easy_mode & 0x60) + i2c_master_send(c, adc_head_9, 2); + else + i2c_master_send(c, adc_head_6, 2); + i2c_master_send(c, pll_bw_nom, 2); + + tda8290_i2c_bridge(c, 1); + if (t->tda827x_ver != 0) + tda827xa_tune(c, ifc, freq); + else + tda827x_tune(c, ifc, freq); + /* adjust headroom resp. gain */ + i2c_master_send(c, &addr_adc_sat, 1); + i2c_master_recv(c, &adc_sat, 1); + i2c_master_send(c, &addr_agc_stat, 1); + i2c_master_recv(c, &agc_stat, 1); + i2c_master_send(c, &addr_pll_stat, 1); + i2c_master_recv(c, &pll_stat, 1); + if (pll_stat & 0x80) + tuner_dbg("tda8290 is locked, AGC: %d\n", agc_stat); + else + tuner_dbg("tda8290 not locked, no signal?\n"); + if ((agc_stat > 115) || (!(pll_stat & 0x80) && (adc_sat < 20))) { + tuner_dbg("adjust gain, step 1. Agc: %d, ADC stat: %d, lock: %d\n", + agc_stat, adc_sat, pll_stat & 0x80); + i2c_master_send(c, gainset_2, 2); + msleep(100); + i2c_master_send(c, &addr_agc_stat, 1); + i2c_master_recv(c, &agc_stat, 1); + i2c_master_send(c, &addr_pll_stat, 1); + i2c_master_recv(c, &pll_stat, 1); + if ((agc_stat > 115) || !(pll_stat & 0x80)) { + tuner_dbg("adjust gain, step 2. Agc: %d, lock: %d\n", + agc_stat, pll_stat & 0x80); + if (t->tda827x_ver != 0) + tda827xa_agcf(c); + else + tda827x_agcf(c); + msleep(100); + i2c_master_send(c, &addr_agc_stat, 1); + i2c_master_recv(c, &agc_stat, 1); + i2c_master_send(c, &addr_pll_stat, 1); + i2c_master_recv(c, &pll_stat, 1); + if((agc_stat > 115) || !(pll_stat & 0x80)) { + tuner_dbg("adjust gain, step 3. Agc: %d\n", agc_stat); + i2c_master_send(c, adc_head_12, 2); + i2c_master_send(c, pll_bw_low, 2); + msleep(100); + } + } + } + + /* l/ l' deadlock? */ + if(t->tda8290_easy_mode & 0x60) { + i2c_master_send(c, &addr_adc_sat, 1); + i2c_master_recv(c, &adc_sat, 1); + i2c_master_send(c, &addr_pll_stat, 1); + i2c_master_recv(c, &pll_stat, 1); + if ((adc_sat > 20) || !(pll_stat & 0x80)) { + tuner_dbg("trying to resolve SECAM L deadlock\n"); + i2c_master_send(c, agc_rst_on, 2); + msleep(40); + i2c_master_send(c, agc_rst_off, 2); + } + } + + tda8290_i2c_bridge(c, 0); + i2c_master_send(c, if_agc_set, 2); + return 0; +} + + +/*---------------------------------------------------------------------*/ + #define V4L2_STD_MN (V4L2_STD_PAL_M|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc|V4L2_STD_NTSC) #define V4L2_STD_B (V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_SECAM_B) #define V4L2_STD_GH (V4L2_STD_PAL_G|V4L2_STD_PAL_H|V4L2_STD_SECAM_G|V4L2_STD_SECAM_H) @@ -174,20 +408,37 @@ static void set_frequency(struct tuner *t, u16 ifc, unsigned int freq) static void set_audio(struct tuner *t) { - t->i2c_easy_mode[0] = 0x01; - - if (t->std & V4L2_STD_MN) - t->i2c_easy_mode[1] = 0x01; - else if (t->std & V4L2_STD_B) - t->i2c_easy_mode[1] = 0x02; - else if (t->std & V4L2_STD_GH) - t->i2c_easy_mode[1] = 0x04; - else if (t->std & V4L2_STD_PAL_I) - t->i2c_easy_mode[1] = 0x08; - else if (t->std & V4L2_STD_DK) - t->i2c_easy_mode[1] = 0x10; - else if (t->std & V4L2_STD_SECAM_L) - t->i2c_easy_mode[1] = 0x20; + char* mode; + + t->tda827x_lpsel = 0; + mode = "xx"; + if (t->std & V4L2_STD_MN) { + t->sgIF = 92; + t->tda8290_easy_mode = 0x01; + t->tda827x_lpsel = 1; + mode = "MN"; + } else if (t->std & V4L2_STD_B) { + t->sgIF = 108; + t->tda8290_easy_mode = 0x02; + mode = "B"; + } else if (t->std & V4L2_STD_GH) { + t->sgIF = 124; + t->tda8290_easy_mode = 0x04; + mode = "GH"; + } else if (t->std & V4L2_STD_PAL_I) { + t->sgIF = 124; + t->tda8290_easy_mode = 0x08; + mode = "I"; + } else if (t->std & V4L2_STD_DK) { + t->sgIF = 124; + t->tda8290_easy_mode = 0x10; + mode = "DK"; + } else if (t->std & V4L2_STD_SECAM_L) { + t->sgIF = 124; + t->tda8290_easy_mode = 0x20; + mode = "L"; + } + tuner_dbg("setting tda8290 to system %s\n", mode); } static void set_tv_freq(struct i2c_client *c, unsigned int freq) @@ -195,15 +446,13 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq) struct tuner *t = i2c_get_clientdata(c); set_audio(t); - set_frequency(t, 864, freq); - tda8290_tune(c); + tda8290_tune(c, t->sgIF, freq); } static void set_radio_freq(struct i2c_client *c, unsigned int freq) { - struct tuner *t = i2c_get_clientdata(c); - set_frequency(t, 704, freq); - tda8290_tune(c); + /* if frequency is 5.5 MHz */ + tda8290_tune(c, 88, freq); } static int has_signal(struct i2c_client *c) @@ -216,27 +465,145 @@ static int has_signal(struct i2c_client *c) return (afc & 0x80)? 65535:0; } +/*---------------------------------------------------------------------*/ + static void standby(struct i2c_client *c) { - i2c_transfer(c->adapter, i2c_msg_standby, ARRAY_SIZE(i2c_msg_standby)); + struct tuner *t = i2c_get_clientdata(c); + unsigned char cb1[] = { 0x30, 0xD0 }; + unsigned char tda8290_standby[] = { 0x00, 0x02 }; + struct i2c_msg msg = {.addr = t->tda827x_addr, .flags=0, .buf=cb1, .len = 2}; + + tda8290_i2c_bridge(c, 1); + if (t->tda827x_ver != 0) + cb1[1] = 0x90; + i2c_transfer(c->adapter, &msg, 1); + tda8290_i2c_bridge(c, 0); + i2c_master_send(c, tda8290_standby, 2); } -int tda8290_init(struct i2c_client *c) + +static void tda8290_init_if(struct i2c_client *c) +{ + unsigned char set_VS[] = { 0x30, 0x6F }; + unsigned char set_GP01_CF[] = { 0x20, 0x0B }; + + i2c_master_send(c, set_VS, 2); + i2c_master_send(c, set_GP01_CF, 2); +} + +static void tda8290_init_tuner(struct i2c_client *c) { struct tuner *t = i2c_get_clientdata(c); + unsigned char tda8275_init[] = { 0x00, 0x00, 0x00, 0x40, 0xdC, 0x04, 0xAf, + 0x3F, 0x2A, 0x04, 0xFF, 0x00, 0x00, 0x40 }; + unsigned char tda8275a_init[] = { 0x00, 0x00, 0x00, 0x00, 0xdC, 0x05, 0x8b, + 0x0c, 0x04, 0x20, 0xFF, 0x00, 0x00, 0x4b }; + struct i2c_msg msg = {.addr = t->tda827x_addr, .flags=0, + .buf=tda8275_init, .len = 14}; + if (t->tda827x_ver != 0) + msg.buf = tda8275a_init; + + tda8290_i2c_bridge(c, 1); + i2c_transfer(c->adapter, &msg, 1); + tda8290_i2c_bridge(c, 0); +} - strlcpy(c->name, "tda8290+75", sizeof(c->name)); +/*---------------------------------------------------------------------*/ + +int tda8290_init(struct i2c_client *c) +{ + struct tuner *t = i2c_get_clientdata(c); + u8 data; + int i, ret, tuners_found; + u32 tuner_addrs; + struct i2c_msg msg = {.flags=I2C_M_RD, .buf=&data, .len = 1}; + + tda8290_i2c_bridge(c, 1); + /* probe for tuner chip */ + tuners_found = 0; + tuner_addrs = 0; + for (i=0x60; i<= 0x63; i++) { + msg.addr = i; + ret = i2c_transfer(c->adapter, &msg, 1); + if (ret == 1) { + tuners_found++; + tuner_addrs = (tuner_addrs << 8) + i; + } + } + /* if there is more than one tuner, we expect the right one is + behind the bridge and we choose the highest address that doesn't + give a response now + */ + tda8290_i2c_bridge(c, 0); + if(tuners_found > 1) + for (i = 0; i < tuners_found; i++) { + msg.addr = tuner_addrs & 0xff; + ret = i2c_transfer(c->adapter, &msg, 1); + if(ret == 1) + tuner_addrs = tuner_addrs >> 8; + else + break; + } + if (tuner_addrs == 0) { + tuner_addrs = 0x61; + tuner_info ("could not clearly identify tuner address, defaulting to %x\n", + tuner_addrs); + } else { + tuner_addrs = tuner_addrs & 0xff; + tuner_info ("setting tuner address to %x\n", tuner_addrs); + } + t->tda827x_addr = tuner_addrs; + msg.addr = tuner_addrs; + + tda8290_i2c_bridge(c, 1); + ret = i2c_transfer(c->adapter, &msg, 1); + if( ret != 1) + tuner_warn ("TDA827x access failed!\n"); + if ((data & 0x3c) == 0) { + strlcpy(c->name, "tda8290+75", sizeof(c->name)); + t->tda827x_ver = 0; + } else { + strlcpy(c->name, "tda8290+75a", sizeof(c->name)); + t->tda827x_ver = 2; + } tuner_info("tuner: type set to %s\n", c->name); + t->tv_freq = set_tv_freq; t->radio_freq = set_radio_freq; t->has_signal = has_signal; t->standby = standby; + t->tda827x_lpsel = 0; - i2c_master_send(c, i2c_enable_bridge, ARRAY_SIZE(i2c_enable_bridge)); - i2c_transfer(c->adapter, i2c_msg_init, ARRAY_SIZE(i2c_msg_init)); + tda8290_init_tuner(c); + tda8290_init_if(c); return 0; } +int tda8290_probe(struct i2c_client *c) +{ + unsigned char soft_reset[] = { 0x00, 0x00 }; + unsigned char easy_mode_b[] = { 0x01, 0x02 }; + unsigned char easy_mode_g[] = { 0x01, 0x04 }; + unsigned char addr_dto_lsb = 0x07; + unsigned char data; + + i2c_master_send(c, easy_mode_b, 2); + i2c_master_send(c, soft_reset, 2); + i2c_master_send(c, &addr_dto_lsb, 1); + i2c_master_recv(c, &data, 1); + if (data == 0) { + i2c_master_send(c, easy_mode_g, 2); + i2c_master_send(c, soft_reset, 2); + i2c_master_send(c, &addr_dto_lsb, 1); + i2c_master_recv(c, &data, 1); + if (data == 0x7b) { + return 0; + } + } + return -1; +} + /* * Overrides for Emacs so that we follow Linus's tabbing style. * --------------------------------------------------------------------------- diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c index 7e3dcdb262b0..a5e37dc91f39 100644 --- a/drivers/media/video/tda9875.c +++ b/drivers/media/video/tda9875.c @@ -32,7 +32,6 @@ #include "bttv.h" #include <media/audiochip.h> -#include <media/id.h> static int debug; /* insmod parameter */ module_param(debug, int, S_IRUGO | S_IWUSR); @@ -126,20 +125,20 @@ static int tda9875_write(struct i2c_client *client, int subaddr, unsigned char v static int i2c_read_register(struct i2c_adapter *adap, int addr, int reg) { - unsigned char write[1]; - unsigned char read[1]; - struct i2c_msg msgs[2] = { - { addr, 0, 1, write }, - { addr, I2C_M_RD, 1, read } - }; - write[0] = reg; - - if (2 != i2c_transfer(adap,msgs,2)) { - printk(KERN_WARNING "tda9875: I/O error (read2)\n"); - return -1; - } - dprintk("tda9875: chip_read2: reg%d=0x%x\n",reg,read[0]); - return read[0]; + unsigned char write[1]; + unsigned char read[1]; + struct i2c_msg msgs[2] = { + { addr, 0, 1, write }, + { addr, I2C_M_RD, 1, read } + }; + write[0] = reg; + + if (2 != i2c_transfer(adap,msgs,2)) { + printk(KERN_WARNING "tda9875: I/O error (read2)\n"); + return -1; + } + dprintk("tda9875: chip_read2: reg%d=0x%x\n",reg,read[0]); + return read[0]; } static void tda9875_set(struct i2c_client *client) @@ -184,7 +183,7 @@ static void do_tda9875_init(struct i2c_client *client) tda9875_write(client, TDA9875_DACOS, 0x02 ); /* sig DAC i/o(in:nicam)*/ tda9875_write(client, TDA9875_ADCIS, 0x6f ); /* sig ADC input(in:mono)*/ tda9875_write(client, TDA9875_LOSR, 0x00 ); /* line out (in:mono)*/ - tda9875_write(client, TDA9875_AER, 0x00 ); /*06 Effect (AVL+PSEUDO) */ + tda9875_write(client, TDA9875_AER, 0x00 ); /*06 Effect (AVL+PSEUDO) */ tda9875_write(client, TDA9875_MCS, 0x44 ); /* Main ch select (DAC) */ tda9875_write(client, TDA9875_MVL, 0x03 ); /* Vol Main left 10dB */ tda9875_write(client, TDA9875_MVR, 0x03 ); /* Vol Main right 10dB*/ @@ -200,7 +199,7 @@ static void do_tda9875_init(struct i2c_client *client) t->mode=AUDIO_UNMUTE; t->lvol=t->rvol =0; /* 0dB */ - t->bass=0; /* 0dB */ + t->bass=0; /* 0dB */ t->treble=0; /* 0dB */ tda9875_set(client); @@ -239,9 +238,9 @@ static int tda9875_attach(struct i2c_adapter *adap, int addr, int kind) memset(t,0,sizeof *t); client = &t->c; - memcpy(client,&client_template,sizeof(struct i2c_client)); - client->adapter = adap; - client->addr = addr; + memcpy(client,&client_template,sizeof(struct i2c_client)); + client->adapter = adap; + client->addr = addr; i2c_set_clientdata(client, t); if(!tda9875_checkit(adap,addr)) { @@ -287,7 +286,7 @@ static int tda9875_command(struct i2c_client *client, dprintk("In tda9875_command...\n"); switch (cmd) { - /* --- v4l ioctls --- */ + /* --- v4l ioctls --- */ /* take care: bttv does userspace copying, we'll get a kernel pointer here... */ case VIDIOCGAUDIO: @@ -355,7 +354,7 @@ static int tda9875_command(struct i2c_client *client, //printk("tda9875 bal:%04x vol:%04x bass:%04x treble:%04x\n",va->balance,va->volume,va->bass,va->treble); - tda9875_set(client); + tda9875_set(client); break; @@ -374,18 +373,18 @@ static int tda9875_command(struct i2c_client *client, static struct i2c_driver driver = { .owner = THIS_MODULE, - .name = "i2c tda9875 driver", - .id = I2C_DRIVERID_TDA9875, - .flags = I2C_DF_NOTIFY, + .name = "i2c tda9875 driver", + .id = I2C_DRIVERID_TDA9875, + .flags = I2C_DF_NOTIFY, .attach_adapter = tda9875_probe, - .detach_client = tda9875_detach, - .command = tda9875_command, + .detach_client = tda9875_detach, + .command = tda9875_command, }; static struct i2c_client client_template = { - .name = "tda9875", - .driver = &driver, + .name = "tda9875", + .driver = &driver, }; static int __init tda9875_init(void) diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index 94053f149ddf..4249127c0a1d 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -11,7 +11,6 @@ #include <media/audiochip.h> #include <media/tuner.h> -#include <media/id.h> /* Chips: TDA9885 (PAL, NTSC) @@ -44,8 +43,13 @@ MODULE_LICENSE("GPL"); /* ---------------------------------------------------------------------- */ #define UNSET (-1U) -#define PREFIX "tda9885/6/7: " -#define dprintk if (debug) printk +#define tda9887_info(fmt, arg...) do {\ + printk(KERN_INFO "%s %d-%04x: " fmt, t->client.name, \ + i2c_adapter_id(t->client.adapter), t->client.addr , ##arg); } while (0) +#define tda9887_dbg(fmt, arg...) do {\ + if (debug) \ + printk(KERN_INFO "%s %d-%04x: " fmt, t->client.name, \ + i2c_adapter_id(t->client.adapter), t->client.addr , ##arg); } while (0) struct tda9887 { struct i2c_client client; @@ -55,6 +59,7 @@ struct tda9887 { unsigned int pinnacle_id; unsigned int using_v4l2; unsigned int radio_mode; + unsigned char data[4]; }; struct tvnorm { @@ -180,7 +185,8 @@ static struct tvnorm tvnorms[] = { .name = "SECAM-L", .b = ( cPositiveAmTV | cQSS ), - .e = ( cAudioIF_6_5 | + .e = ( cGating_36 | + cAudioIF_6_5 | cVideoIF_38_90 ), },{ .std = V4L2_STD_SECAM_DK, @@ -236,7 +242,7 @@ static struct tvnorm radio_mono = { /* ---------------------------------------------------------------------- */ -static void dump_read_message(unsigned char *buf) +static void dump_read_message(struct tda9887 *t, unsigned char *buf) { static char *afc[16] = { "- 12.5 kHz", @@ -256,15 +262,15 @@ static void dump_read_message(unsigned char *buf) "+ 37.5 kHz", "+ 12.5 kHz", }; - printk(PREFIX "read: 0x%2x\n", buf[0]); - printk(" after power on : %s\n", (buf[0] & 0x01) ? "yes" : "no"); - printk(" afc : %s\n", afc[(buf[0] >> 1) & 0x0f]); - printk(" fmif level : %s\n", (buf[0] & 0x20) ? "high" : "low"); - printk(" afc window : %s\n", (buf[0] & 0x40) ? "in" : "out"); - printk(" vfi level : %s\n", (buf[0] & 0x80) ? "high" : "low"); + tda9887_info("read: 0x%2x\n", buf[0]); + tda9887_info(" after power on : %s\n", (buf[0] & 0x01) ? "yes" : "no"); + tda9887_info(" afc : %s\n", afc[(buf[0] >> 1) & 0x0f]); + tda9887_info(" fmif level : %s\n", (buf[0] & 0x20) ? "high" : "low"); + tda9887_info(" afc window : %s\n", (buf[0] & 0x40) ? "in" : "out"); + tda9887_info(" vfi level : %s\n", (buf[0] & 0x80) ? "high" : "low"); } -static void dump_write_message(unsigned char *buf) +static void dump_write_message(struct tda9887 *t, unsigned char *buf) { static char *sound[4] = { "AM/TV", @@ -304,58 +310,58 @@ static void dump_write_message(unsigned char *buf) "44 MHz", }; - printk(PREFIX "write: byte B 0x%02x\n",buf[1]); - printk(" B0 video mode : %s\n", + tda9887_info("write: byte B 0x%02x\n",buf[1]); + tda9887_info(" B0 video mode : %s\n", (buf[1] & 0x01) ? "video trap" : "sound trap"); - printk(" B1 auto mute fm : %s\n", + tda9887_info(" B1 auto mute fm : %s\n", (buf[1] & 0x02) ? "yes" : "no"); - printk(" B2 carrier mode : %s\n", + tda9887_info(" B2 carrier mode : %s\n", (buf[1] & 0x04) ? "QSS" : "Intercarrier"); - printk(" B3-4 tv sound/radio : %s\n", + tda9887_info(" B3-4 tv sound/radio : %s\n", sound[(buf[1] & 0x18) >> 3]); - printk(" B5 force mute audio: %s\n", + tda9887_info(" B5 force mute audio: %s\n", (buf[1] & 0x20) ? "yes" : "no"); - printk(" B6 output port 1 : %s\n", + tda9887_info(" B6 output port 1 : %s\n", (buf[1] & 0x40) ? "high (inactive)" : "low (active)"); - printk(" B7 output port 2 : %s\n", + tda9887_info(" B7 output port 2 : %s\n", (buf[1] & 0x80) ? "high (inactive)" : "low (active)"); - printk(PREFIX "write: byte C 0x%02x\n",buf[2]); - printk(" C0-4 top adjustment : %s dB\n", adjust[buf[2] & 0x1f]); - printk(" C5-6 de-emphasis : %s\n", deemph[(buf[2] & 0x60) >> 5]); - printk(" C7 audio gain : %s\n", + tda9887_info("write: byte C 0x%02x\n",buf[2]); + tda9887_info(" C0-4 top adjustment : %s dB\n", adjust[buf[2] & 0x1f]); + tda9887_info(" C5-6 de-emphasis : %s\n", deemph[(buf[2] & 0x60) >> 5]); + tda9887_info(" C7 audio gain : %s\n", (buf[2] & 0x80) ? "-6" : "0"); - printk(PREFIX "write: byte E 0x%02x\n",buf[3]); - printk(" E0-1 sound carrier : %s\n", + tda9887_info("write: byte E 0x%02x\n",buf[3]); + tda9887_info(" E0-1 sound carrier : %s\n", carrier[(buf[3] & 0x03)]); - printk(" E6 l pll ganting : %s\n", + tda9887_info(" E6 l pll gating : %s\n", (buf[3] & 0x40) ? "36" : "13"); if (buf[1] & 0x08) { /* radio */ - printk(" E2-4 video if : %s\n", + tda9887_info(" E2-4 video if : %s\n", rif[(buf[3] & 0x0c) >> 2]); - printk(" E7 vif agc output : %s\n", + tda9887_info(" E7 vif agc output : %s\n", (buf[3] & 0x80) ? ((buf[3] & 0x10) ? "fm-agc radio" : "sif-agc radio") : "fm radio carrier afc"); } else { /* video */ - printk(" E2-4 video if : %s\n", + tda9887_info(" E2-4 video if : %s\n", vif[(buf[3] & 0x1c) >> 2]); - printk(" E5 tuner gain : %s\n", + tda9887_info(" E5 tuner gain : %s\n", (buf[3] & 0x80) ? ((buf[3] & 0x20) ? "external" : "normal") : ((buf[3] & 0x20) ? "minimum" : "normal")); - printk(" E7 vif agc output : %s\n", + tda9887_info(" E7 vif agc output : %s\n", (buf[3] & 0x80) ? ((buf[3] & 0x20) ? "pin3 port, pin22 vif agc out" : "pin22 port, pin3 vif acg ext in") : "pin3+pin22 port"); } - printk("--\n"); + tda9887_info("--\n"); } /* ---------------------------------------------------------------------- */ @@ -379,11 +385,11 @@ static int tda9887_set_tvnorm(struct tda9887 *t, char *buf) } } if (NULL == norm) { - dprintk(PREFIX "Unsupported tvnorm entry - audio muted\n"); + tda9887_dbg("Unsupported tvnorm entry - audio muted\n"); return -1; } - dprintk(PREFIX "configure for: %s\n",norm->name); + tda9887_dbg("configure for: %s\n",norm->name); buf[1] = norm->b; buf[2] = norm->c; buf[3] = norm->e; @@ -458,6 +464,8 @@ static int tda9887_set_config(struct tda9887 *t, char *buf) break; } } + if ((t->config & TDA9887_INTERCARRIER_NTSC) && (t->std & V4L2_STD_NTSC)) + buf[1] &= ~cQSS; return 0; } @@ -475,11 +483,11 @@ static int tda9887_set_pinnacle(struct tda9887 *t, char *buf) } } if (t->std & V4L2_STD_525_60) { - if ((5 == t->pinnacle_id) || (6 == t->pinnacle_id)) { + if ((5 == t->pinnacle_id) || (6 == t->pinnacle_id)) { bCarrierMode = cIntercarrier; } else { bCarrierMode = cQSS; - } + } } if (bCarrierMode != UNSET) { @@ -505,26 +513,26 @@ static int tda9887_fixup_std(struct tda9887 *t) case 'B': case 'g': case 'G': - dprintk(PREFIX "insmod fixup: PAL => PAL-BG\n"); + tda9887_dbg("insmod fixup: PAL => PAL-BG\n"); t->std = V4L2_STD_PAL_BG; break; case 'i': case 'I': - dprintk(PREFIX "insmod fixup: PAL => PAL-I\n"); + tda9887_dbg("insmod fixup: PAL => PAL-I\n"); t->std = V4L2_STD_PAL_I; break; case 'd': case 'D': case 'k': case 'K': - dprintk(PREFIX "insmod fixup: PAL => PAL-DK\n"); + tda9887_dbg("insmod fixup: PAL => PAL-DK\n"); t->std = V4L2_STD_PAL_DK; break; case '-': /* default parameter, do nothing */ break; default: - printk(PREFIX "pal= argument not recognised\n"); + tda9887_info("pal= argument not recognised\n"); break; } } @@ -534,19 +542,19 @@ static int tda9887_fixup_std(struct tda9887 *t) case 'D': case 'k': case 'K': - dprintk(PREFIX "insmod fixup: SECAM => SECAM-DK\n"); + tda9887_dbg("insmod fixup: SECAM => SECAM-DK\n"); t->std = V4L2_STD_SECAM_DK; break; case 'l': case 'L': - dprintk(PREFIX "insmod fixup: SECAM => SECAM-L\n"); + tda9887_dbg("insmod fixup: SECAM => SECAM-L\n"); t->std = V4L2_STD_SECAM_L; break; case '-': /* default parameter, do nothing */ break; default: - printk(PREFIX "secam= argument not recognised\n"); + tda9887_info("secam= argument not recognised\n"); break; } } @@ -559,41 +567,40 @@ static int tda9887_status(struct tda9887 *t) int rc; memset(buf,0,sizeof(buf)); - if (1 != (rc = i2c_master_recv(&t->client,buf,1))) - printk(PREFIX "i2c i/o error: rc == %d (should be 1)\n",rc); - dump_read_message(buf); + if (1 != (rc = i2c_master_recv(&t->client,buf,1))) + tda9887_info("i2c i/o error: rc == %d (should be 1)\n",rc); + dump_read_message(t, buf); return 0; } static int tda9887_configure(struct tda9887 *t) { - unsigned char buf[4]; int rc; - memset(buf,0,sizeof(buf)); - tda9887_set_tvnorm(t,buf); + memset(t->data,0,sizeof(t->data)); + tda9887_set_tvnorm(t,t->data); - buf[1] |= cOutputPort1Inactive; - buf[1] |= cOutputPort2Inactive; + t->data[1] |= cOutputPort1Inactive; + t->data[1] |= cOutputPort2Inactive; if (UNSET != t->pinnacle_id) { - tda9887_set_pinnacle(t,buf); + tda9887_set_pinnacle(t,t->data); } - tda9887_set_config(t,buf); - tda9887_set_insmod(t,buf); + tda9887_set_config(t,t->data); + tda9887_set_insmod(t,t->data); if (t->mode == T_STANDBY) { - buf[1] |= cForcedMuteAudioON; + t->data[1] |= cForcedMuteAudioON; } - dprintk(PREFIX "writing: b=0x%02x c=0x%02x e=0x%02x\n", - buf[1],buf[2],buf[3]); + tda9887_dbg("writing: b=0x%02x c=0x%02x e=0x%02x\n", + t->data[1],t->data[2],t->data[3]); if (debug > 1) - dump_write_message(buf); + dump_write_message(t, t->data); - if (4 != (rc = i2c_master_send(&t->client,buf,4))) - printk(PREFIX "i2c i/o error: rc == %d (should be 4)\n",rc); + if (4 != (rc = i2c_master_send(&t->client,t->data,4))) + tda9887_info("i2c i/o error: rc == %d (should be 4)\n",rc); if (debug > 2) { msleep_interruptible(1000); @@ -608,13 +615,11 @@ static int tda9887_attach(struct i2c_adapter *adap, int addr, int kind) { struct tda9887 *t; - client_template.adapter = adap; - client_template.addr = addr; - - printk(PREFIX "chip found @ 0x%x\n", addr<<1); + client_template.adapter = adap; + client_template.addr = addr; - if (NULL == (t = kmalloc(sizeof(*t), GFP_KERNEL))) - return -ENOMEM; + if (NULL == (t = kmalloc(sizeof(*t), GFP_KERNEL))) + return -ENOMEM; memset(t,0,sizeof(*t)); t->client = client_template; @@ -622,6 +627,8 @@ static int tda9887_attach(struct i2c_adapter *adap, int addr, int kind) t->pinnacle_id = UNSET; t->radio_mode = V4L2_TUNER_MODE_STEREO; + tda9887_info("chip found @ 0x%x (%s)\n", addr<<1, adap->name); + i2c_set_clientdata(&t->client, t); i2c_attach_client(&t->client); @@ -655,18 +662,18 @@ static int tda9887_detach(struct i2c_client *client) } #define SWITCH_V4L2 if (!t->using_v4l2 && debug) \ - printk(PREFIX "switching to v4l2\n"); \ - t->using_v4l2 = 1; + tda9887_info("switching to v4l2\n"); \ + t->using_v4l2 = 1; #define CHECK_V4L2 if (t->using_v4l2) { if (debug) \ - printk(PREFIX "ignore v4l1 call\n"); \ - return 0; } + tda9887_info("ignore v4l1 call\n"); \ + return 0; } static int tda9887_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct tda9887 *t = i2c_get_clientdata(client); - switch (cmd) { + switch (cmd) { /* --- configuration --- */ case AUDC_SET_RADIO: @@ -777,6 +784,11 @@ tda9887_command(struct i2c_client *client, unsigned int cmd, void *arg) } break; } + case VIDIOC_LOG_STATUS: + { + tda9887_info("Data bytes: b=%02x c=%02x e=%02x\n", t->data[1], t->data[2], t->data[3]); + break; + } default: /* nothing */ break; @@ -786,7 +798,10 @@ tda9887_command(struct i2c_client *client, unsigned int cmd, void *arg) static int tda9887_suspend(struct device * dev, pm_message_t state) { - dprintk("tda9887: suspend\n"); + struct i2c_client *c = container_of(dev, struct i2c_client, dev); + struct tda9887 *t = i2c_get_clientdata(c); + + tda9887_dbg("suspend\n"); return 0; } @@ -795,7 +810,7 @@ static int tda9887_resume(struct device * dev) struct i2c_client *c = container_of(dev, struct i2c_client, dev); struct tda9887 *t = i2c_get_clientdata(c); - dprintk("tda9887: resume\n"); + tda9887_dbg("resume\n"); tda9887_configure(t); return 0; } diff --git a/drivers/media/video/tea5767.c b/drivers/media/video/tea5767.c index 38bf50943798..a9375ef05de1 100644 --- a/drivers/media/video/tea5767.c +++ b/drivers/media/video/tea5767.c @@ -117,10 +117,10 @@ #define TEA5767_RESERVED_MASK 0xff enum tea5767_xtal_freq { - TEA5767_LOW_LO_32768 = 0, - TEA5767_HIGH_LO_32768 = 1, - TEA5767_LOW_LO_13MHz = 2, - TEA5767_HIGH_LO_13MHz = 3, + TEA5767_LOW_LO_32768 = 0, + TEA5767_HIGH_LO_32768 = 1, + TEA5767_LOW_LO_13MHz = 2, + TEA5767_HIGH_LO_13MHz = 3, }; diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index ad85bef1c3d5..73c4041c35d7 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -28,7 +28,7 @@ /* standard i2c insmod options */ static unsigned short normal_i2c[] = { - 0x4b, /* tda8290 */ + 0x42, 0x43, 0x4a, 0x4b, /* tda8290 */ 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, I2C_CLIENT_END @@ -189,6 +189,13 @@ static void set_type(struct i2c_client *c, unsigned int type, i2c_master_send(c, buffer, 4); default_tuner_init(c); break; + case TUNER_PHILIPS_TD1316: + buffer[0] = 0x0b; + buffer[1] = 0xdc; + buffer[2] = 0x86; + buffer[3] = 0xa4; + i2c_master_send(c,buffer,4); + default_tuner_init(c); default: default_tuner_init(c); break; @@ -215,9 +222,9 @@ static void set_addr(struct i2c_client *c, struct tuner_setup *tun_setup) { struct tuner *t = i2c_get_clientdata(c); - if ((tun_setup->addr == ADDR_UNSET && + if ( t->type == UNSET && ((tun_setup->addr == ADDR_UNSET && (t->mode_mask & tun_setup->mode_mask)) || - tun_setup->addr == c->addr) { + tun_setup->addr == c->addr)) { set_type(c, tun_setup->type, tun_setup->mode_mask); } } @@ -341,23 +348,33 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind) t->audmode = V4L2_TUNER_MODE_STEREO; t->mode_mask = T_UNINITIALIZED; - - tuner_info("chip found @ 0x%x (%s)\n", addr << 1, adap->name); - if (show_i2c) { unsigned char buffer[16]; int i,rc; memset(buffer, 0, sizeof(buffer)); rc = i2c_master_recv(&t->i2c, buffer, sizeof(buffer)); - printk("tuner-%04x I2C RECV = ",addr); + tuner_info("I2C RECV = "); for (i=0;i<rc;i++) printk("%02x ",buffer[i]); printk("\n"); } /* TEA5767 autodetection code - only for addr = 0xc0 */ if (!no_autodetect) { - if (addr == 0x60) { + switch (addr) { + case 0x42: + case 0x43: + case 0x4a: + case 0x4b: + /* If chip is not tda8290, don't register. + since it can be tda9887*/ + if (tda8290_probe(&t->i2c) != 0) { + tuner_dbg("chip at addr %x is not a tda8290\n", addr); + kfree(t); + return 0; + } + break; + case 0x60: if (tea5767_autodetection(&t->i2c) != EINVAL) { t->type = TUNER_TEA5767; t->mode_mask = T_RADIO; @@ -365,10 +382,9 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind) t->freq = 87.5 * 16; /* Sets freq to FM range */ default_mode_mask &= ~T_RADIO; - i2c_attach_client (&t->i2c); - set_type(&t->i2c,t->type, t->mode_mask); - return 0; + goto register_client; } + break; } } @@ -381,6 +397,8 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind) } /* Should be just before return */ +register_client: + tuner_info("chip found @ 0x%x (%s)\n", addr << 1, adap->name); i2c_attach_client (&t->i2c); set_type (&t->i2c,t->type, t->mode_mask); return 0; @@ -425,23 +443,23 @@ static int tuner_detach(struct i2c_client *client) static inline int set_mode(struct i2c_client *client, struct tuner *t, int mode, char *cmd) { - if (mode == t->mode) - return 0; - - t->mode = mode; - - if (check_mode(t, cmd) == EINVAL) { - t->mode = T_STANDBY; - if (t->standby) - t->standby (client); - return EINVAL; - } - return 0; + if (mode == t->mode) + return 0; + + t->mode = mode; + + if (check_mode(t, cmd) == EINVAL) { + t->mode = T_STANDBY; + if (t->standby) + t->standby (client); + return EINVAL; + } + return 0; } #define switch_v4l2() if (!t->using_v4l2) \ - tuner_dbg("switching to v4l2\n"); \ - t->using_v4l2 = 1; + tuner_dbg("switching to v4l2\n"); \ + t->using_v4l2 = 1; static inline int check_v4l2(struct tuner *t) { @@ -479,8 +497,6 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) break; } case AUDC_CONFIG_PINNACLE: - if (check_mode(t, "AUDC_CONFIG_PINNACLE") == EINVAL) - return 0; switch (*iarg) { case 2: tuner_dbg("pinnacle pal\n"); @@ -616,7 +632,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) switch_v4l2(); if (V4L2_TUNER_RADIO == f->type && V4L2_TUNER_RADIO != t->mode) { - if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY") + if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY") == EINVAL) return 0; } @@ -688,7 +704,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) break; } default: - tuner_dbg("Unimplemented IOCTL 0x%08x(dir=%d,tp=0x%02x,nr=%d,sz=%d)\n", + tuner_dbg("Unimplemented IOCTL 0x%08x(dir=%d,tp='%c',nr=%d,sz=%d)\n", cmd, _IOC_DIR(cmd), _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd)); break; diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c index 8edd73abe1d8..d832205818f2 100644 --- a/drivers/media/video/tuner-simple.c +++ b/drivers/media/video/tuner-simple.c @@ -102,7 +102,7 @@ struct tunertype */ static struct tunertype tuners[] = { /* 0-9 */ - { "Temic PAL (4002 FH5)", TEMIC, PAL, + { "Temic PAL (4002 FH5)", TEMIC, PAL, 16*140.25,16*463.25,0x02,0x04,0x01,0x8e,623}, { "Philips PAL_I (FI1246 and compatibles)", Philips, PAL_I, 16*140.25,16*463.25,0xa0,0x90,0x30,0x8e,623}, @@ -118,41 +118,41 @@ static struct tunertype tuners[] = { 16*157.25,16*463.25,0x02,0x04,0x01,0x8e,732}, { "Temic PAL_I (4062 FY5)", TEMIC, PAL_I, 16*170.00,16*450.00,0x02,0x04,0x01,0x8e,623}, - { "Temic NTSC (4036 FY5)", TEMIC, NTSC, + { "Temic NTSC (4036 FY5)", TEMIC, NTSC, 16*157.25,16*463.25,0xa0,0x90,0x30,0x8e,732}, - { "Alps HSBH1", TEMIC, NTSC, + { "Alps HSBH1", TEMIC, NTSC, 16*137.25,16*385.25,0x01,0x02,0x08,0x8e,732}, /* 10-19 */ - { "Alps TSBE1", TEMIC, PAL, + { "Alps TSBE1", TEMIC, PAL, 16*137.25,16*385.25,0x01,0x02,0x08,0x8e,732}, - { "Alps TSBB5", Alps, PAL_I, /* tested (UK UHF) with Modulartech MM205 */ + { "Alps TSBB5", Alps, PAL_I, /* tested (UK UHF) with Modulartech MM205 */ 16*133.25,16*351.25,0x01,0x02,0x08,0x8e,632}, - { "Alps TSBE5", Alps, PAL, /* untested - data sheet guess. Only IF differs. */ + { "Alps TSBE5", Alps, PAL, /* untested - data sheet guess. Only IF differs. */ 16*133.25,16*351.25,0x01,0x02,0x08,0x8e,622}, - { "Alps TSBC5", Alps, PAL, /* untested - data sheet guess. Only IF differs. */ + { "Alps TSBC5", Alps, PAL, /* untested - data sheet guess. Only IF differs. */ 16*133.25,16*351.25,0x01,0x02,0x08,0x8e,608}, { "Temic PAL_BG (4006FH5)", TEMIC, PAL, 16*170.00,16*450.00,0xa0,0x90,0x30,0x8e,623}, - { "Alps TSCH6", Alps, NTSC, - 16*137.25,16*385.25,0x14,0x12,0x11,0x8e,732}, - { "Temic PAL_DK (4016 FY5)", TEMIC, PAL, - 16*168.25,16*456.25,0xa0,0x90,0x30,0x8e,623}, - { "Philips NTSC_M (MK2)", Philips, NTSC, - 16*160.00,16*454.00,0xa0,0x90,0x30,0x8e,732}, - { "Temic PAL_I (4066 FY5)", TEMIC, PAL_I, - 16*169.00, 16*454.00, 0xa0,0x90,0x30,0x8e,623}, - { "Temic PAL* auto (4006 FN5)", TEMIC, PAL, - 16*169.00, 16*454.00, 0xa0,0x90,0x30,0x8e,623}, + { "Alps TSCH6", Alps, NTSC, + 16*137.25,16*385.25,0x14,0x12,0x11,0x8e,732}, + { "Temic PAL_DK (4016 FY5)", TEMIC, PAL, + 16*168.25,16*456.25,0xa0,0x90,0x30,0x8e,623}, + { "Philips NTSC_M (MK2)", Philips, NTSC, + 16*160.00,16*454.00,0xa0,0x90,0x30,0x8e,732}, + { "Temic PAL_I (4066 FY5)", TEMIC, PAL_I, + 16*169.00, 16*454.00, 0xa0,0x90,0x30,0x8e,623}, + { "Temic PAL* auto (4006 FN5)", TEMIC, PAL, + 16*169.00, 16*454.00, 0xa0,0x90,0x30,0x8e,623}, /* 20-29 */ - { "Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)", TEMIC, PAL, - 16*141.00, 16*464.00, 0xa0,0x90,0x30,0x8e,623}, - { "Temic NTSC (4039 FR5)", TEMIC, NTSC, - 16*158.00, 16*453.00, 0xa0,0x90,0x30,0x8e,732}, - { "Temic PAL/SECAM multi (4046 FM5)", TEMIC, PAL, - 16*169.00, 16*454.00, 0xa0,0x90,0x30,0x8e,623}, - { "Philips PAL_DK (FI1256 and compatibles)", Philips, PAL, + { "Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)", TEMIC, PAL, + 16*141.00, 16*464.00, 0xa0,0x90,0x30,0x8e,623}, + { "Temic NTSC (4039 FR5)", TEMIC, NTSC, + 16*158.00, 16*453.00, 0xa0,0x90,0x30,0x8e,732}, + { "Temic PAL/SECAM multi (4046 FM5)", TEMIC, PAL, + 16*169.00, 16*454.00, 0xa0,0x90,0x30,0x8e,623}, + { "Philips PAL_DK (FI1256 and compatibles)", Philips, PAL, 16*170.00,16*450.00,0xa0,0x90,0x30,0x8e,623}, { "Philips PAL/SECAM multi (FQ1216ME)", Philips, PAL, 16*170.00,16*450.00,0xa0,0x90,0x30,0x8e,623}, @@ -173,21 +173,21 @@ static struct tunertype tuners[] = { { "SHARP NTSC_JP (2U5JF5540)", SHARP, NTSC, /* 940=16*58.75 NTSC@Japan */ 16*137.25,16*317.25,0x01,0x02,0x08,0x8e,940 }, { "Samsung PAL TCPM9091PD27", Samsung, PAL, /* from sourceforge v3tv */ - 16*169,16*464,0xA0,0x90,0x30,0x8e,623}, + 16*169,16*464,0xA0,0x90,0x30,0x8e,623}, { "MT20xx universal", Microtune, PAL|NTSC, /* see mt20xx.c for details */ }, { "Temic PAL_BG (4106 FH5)", TEMIC, PAL, - 16*141.00, 16*464.00, 0xa0,0x90,0x30,0x8e,623}, + 16*141.00, 16*464.00, 0xa0,0x90,0x30,0x8e,623}, { "Temic PAL_DK/SECAM_L (4012 FY5)", TEMIC, PAL, - 16*140.25, 16*463.25, 0x02,0x04,0x01,0x8e,623}, + 16*140.25, 16*463.25, 0x02,0x04,0x01,0x8e,623}, { "Temic NTSC (4136 FY5)", TEMIC, NTSC, - 16*158.00, 16*453.00, 0xa0,0x90,0x30,0x8e,732}, - { "LG PAL (newer TAPC series)", LGINNOTEK, PAL, - 16*170.00, 16*450.00, 0x01,0x02,0x08,0x8e,623}, + 16*158.00, 16*453.00, 0xa0,0x90,0x30,0x8e,732}, + { "LG PAL (newer TAPC series)", LGINNOTEK, PAL, + 16*170.00, 16*450.00, 0x01,0x02,0x08,0x8e,623}, { "Philips PAL/SECAM multi (FM1216ME MK3)", Philips, PAL, - 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,623 }, + 16*158.00,16*442.00,0x01,0x02,0x04,0x8e,623 }, { "LG NTSC (newer TAPC series)", LGINNOTEK, NTSC, - 16*170.00, 16*450.00, 0x01,0x02,0x08,0x8e,732}, + 16*170.00, 16*450.00, 0x01,0x02,0x08,0x8e,732}, /* 40-49 */ { "HITACHI V7-J180AT", HITACHI, NTSC, @@ -196,24 +196,24 @@ static struct tunertype tuners[] = { 16*140.25,16*463.25,0x01,0xc2,0xcf,0x8e,623}, { "Philips 1236D ATSC/NTSC daul in", Philips, ATSC, 16*157.25,16*454.00,0xa0,0x90,0x30,0x8e,732}, - { "Philips NTSC MK3 (FM1236MK3 or FM1236/F)", Philips, NTSC, - 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732}, - { "Philips 4 in 1 (ATI TV Wonder Pro/Conexant)", Philips, NTSC, - 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732}, + { "Philips NTSC MK3 (FM1236MK3 or FM1236/F)", Philips, NTSC, + 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732}, + { "Philips 4 in 1 (ATI TV Wonder Pro/Conexant)", Philips, NTSC, + 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732}, { "Microtune 4049 FM5", Microtune, PAL, 16*141.00,16*464.00,0xa0,0x90,0x30,0x8e,623}, { "Panasonic VP27s/ENGE4324D", Panasonic, NTSC, 16*160.00,16*454.00,0x01,0x02,0x08,0xce,940}, - { "LG NTSC (TAPE series)", LGINNOTEK, NTSC, - 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732 }, - { "Tenna TNF 8831 BGFF)", Philips, PAL, - 16*161.25,16*463.25,0xa0,0x90,0x30,0x8e,623}, + { "LG NTSC (TAPE series)", LGINNOTEK, NTSC, + 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732 }, + { "Tenna TNF 8831 BGFF)", Philips, PAL, + 16*161.25,16*463.25,0xa0,0x90,0x30,0x8e,623}, { "Microtune 4042 FI5 ATSC/NTSC dual in", Microtune, NTSC, 16*162.00,16*457.00,0xa2,0x94,0x31,0x8e,732}, /* 50-59 */ - { "TCL 2002N", TCL, NTSC, - 16*172.00,16*448.00,0x01,0x02,0x08,0x8e,732}, + { "TCL 2002N", TCL, NTSC, + 16*172.00,16*448.00,0x01,0x02,0x08,0x8e,732}, { "Philips PAL/SECAM_D (FM 1256 I-H3)", Philips, PAL, 16*160.00,16*442.00,0x01,0x02,0x04,0x8e,623 }, { "Thomson DDT 7610 (ATSC/NTSC)", THOMSON, ATSC, @@ -222,8 +222,8 @@ static struct tunertype tuners[] = { 16*160.00,16*454.00,0x41,0x42,0x04,0x8e,940}, /* UHF band untested */ { "tda8290+75", Philips, PAL|NTSC, /* see tda8290.c for details */ }, - { "LG PAL (TAPE series)", LGINNOTEK, PAL, - 16*170.00, 16*450.00, 0x01,0x02,0x08,0xce,623}, + { "TCL 2002MB", TCL, PAL, + 16*170.00, 16*450.00, 0x01,0x02,0x08,0xce,623}, { "Philips PAL/SECAM multi (FQ1216AME MK4)", Philips, PAL, 16*160.00,16*442.00,0x01,0x02,0x04,0xce,623 }, { "Philips FQ1236A MK4", Philips, NTSC, @@ -233,21 +233,25 @@ static struct tunertype tuners[] = { { "Ymec TVision TVF-5533MF", Philips, NTSC, 16*160.00,16*454.00,0x01,0x02,0x04,0x8e,732}, - /* 60-66 */ + /* 60-68 */ { "Thomson DDT 7611 (ATSC/NTSC)", THOMSON, ATSC, 16*157.25,16*454.00,0x39,0x3a,0x3c,0x8e,732}, { "Tena TNF9533-D/IF/TNF9533-B/DF", Philips, PAL, - 16*160.25,16*464.25,0x01,0x02,0x04,0x8e,623}, + 16*160.25,16*464.25,0x01,0x02,0x04,0x8e,623}, { "Philips TEA5767HN FM Radio", Philips, RADIO, - /* see tea5767.c for details */}, + /* see tea5767.c for details */}, { "Philips FMD1216ME MK3 Hybrid Tuner", Philips, PAL, 16*160.00,16*442.00,0x51,0x52,0x54,0x86,623 }, { "LG TDVS-H062F/TUA6034", LGINNOTEK, ATSC, 16*160.00,16*455.00,0x01,0x02,0x04,0x8e,732}, { "Ymec TVF66T5-B/DFF", Philips, PAL, - 16*160.25,16*464.25,0x01,0x02,0x08,0x8e,623}, - { "LG NTSC (TALN mini series)", LGINNOTEK, NTSC, + 16*160.25,16*464.25,0x01,0x02,0x08,0x8e,623}, + { "LG NTSC (TALN mini series)", LGINNOTEK, NTSC, 16*137.25,16*373.25,0x01,0x02,0x08,0x8e,732 }, + { "Philips TD1316 Hybrid Tuner", Philips, PAL, + 16*160.00,16*442.00,0xa1,0xa2,0xa4,0xc8,623 }, + { "Philips TUV1236D ATSC/NTSC dual in", Philips, ATSC, + 16*157.25,16*454.00,0x01,0x02,0x04,0xce,732 }, }; unsigned const int tuner_count = ARRAY_SIZE(tuners); @@ -277,7 +281,7 @@ static int tuner_stereo(struct i2c_client *c) status = tuner_getstatus (c); switch (t->type) { - case TUNER_PHILIPS_FM1216ME_MK3: + case TUNER_PHILIPS_FM1216ME_MK3: case TUNER_PHILIPS_FM1236_MK3: case TUNER_PHILIPS_FM1256_IH3: stereo = ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3); @@ -295,10 +299,10 @@ static int tuner_stereo(struct i2c_client *c) static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) { struct tuner *t = i2c_get_clientdata(c); - u8 config; + u8 config, tuneraddr; u16 div; struct tunertype *tun; - unsigned char buffer[4]; + unsigned char buffer[4]; int rc; tun = &tuners[t->type]; @@ -373,6 +377,31 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) /* Set the charge pump for fast tuning */ tun->config |= TUNER_CHARGE_PUMP; break; + + case TUNER_PHILIPS_TUV1236D: + /* 0x40 -> ATSC antenna input 1 */ + /* 0x48 -> ATSC antenna input 2 */ + /* 0x00 -> NTSC antenna input 1 */ + /* 0x08 -> NTSC antenna input 2 */ + buffer[0] = 0x14; + buffer[1] = 0x00; + buffer[2] = 0x17; + buffer[3] = 0x00; + config &= ~0x40; + if (t->std & V4L2_STD_ATSC) { + config |= 0x40; + buffer[1] = 0x04; + } + /* set to the correct mode (analog or digital) */ + tuneraddr = c->addr; + c->addr = 0x0a; + if (2 != (rc = i2c_master_send(c,&buffer[0],2))) + tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); + if (2 != (rc = i2c_master_send(c,&buffer[2],2))) + tuner_warn("i2c i/o error: rc == %d (should be 2)\n",rc); + c->addr = tuneraddr; + /* FIXME: input */ + break; } /* @@ -404,7 +433,7 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", buffer[0],buffer[1],buffer[2],buffer[3]); - if (4 != (rc = i2c_master_send(c,buffer,4))) + if (4 != (rc = i2c_master_send(c,buffer,4))) tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); if (t->type == TUNER_MICROTUNE_4042FI5) { @@ -443,7 +472,7 @@ static void default_set_radio_freq(struct i2c_client *c, unsigned int freq) { struct tunertype *tun; struct tuner *t = i2c_get_clientdata(c); - unsigned char buffer[4]; + unsigned char buffer[4]; unsigned div; int rc; @@ -476,13 +505,13 @@ static void default_set_radio_freq(struct i2c_client *c, unsigned int freq) buffer[3] = 0xa4; break; } - buffer[0] = (div>>8) & 0x7f; - buffer[1] = div & 0xff; + buffer[0] = (div>>8) & 0x7f; + buffer[1] = div & 0xff; tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n", buffer[0],buffer[1],buffer[2],buffer[3]); - if (4 != (rc = i2c_master_send(c,buffer,4))) + if (4 != (rc = i2c_master_send(c,buffer,4))) tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc); } diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 1c31ef52f863..c31bf28b73fe 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -31,7 +31,6 @@ #include <linux/smp_lock.h> #include <media/audiochip.h> -#include <media/id.h> #include "tvaudio.h" @@ -458,8 +457,8 @@ static void tda9840_setmode(struct CHIPSTATE *chip, int mode) #define TDA9855_LOUD 1<<5 /* Loudness, 1==off */ #define TDA9855_SUR 1<<3 /* Surround / Subwoofer 1==.5(L-R) 0==.5(L+R) */ /* Bits 0 to 3 select various combinations - * of line in and line out, only the - * interesting ones are defined */ + * of line in and line out, only the + * interesting ones are defined */ #define TDA9855_EXT 1<<2 /* Selects inputs LIR and LIL. Pins 41 & 12 */ #define TDA9855_INT 0 /* Selects inputs LOR and LOL. (internal) */ @@ -1028,7 +1027,7 @@ static int tda9874a_initialize(struct CHIPSTATE *chip) #define TEA6300_TR 0x03 /* treble */ #define TEA6300_FA 0x04 /* fader control */ #define TEA6300_S 0x05 /* switch register */ - /* values for those registers: */ + /* values for those registers: */ #define TEA6300_S_SA 0x01 /* stereo A input */ #define TEA6300_S_SB 0x02 /* stereo B */ #define TEA6300_S_SC 0x04 /* stereo C */ @@ -1042,7 +1041,7 @@ static int tda9874a_initialize(struct CHIPSTATE *chip) #define TEA6320_BA 0x05 /* bass (0-4) */ #define TEA6320_TR 0x06 /* treble (0-4) */ #define TEA6320_S 0x07 /* switch register */ - /* values for those registers: */ + /* values for those registers: */ #define TEA6320_S_SA 0x07 /* stereo A input */ #define TEA6320_S_SB 0x06 /* stereo B */ #define TEA6320_S_SC 0x05 /* stereo C */ @@ -1082,7 +1081,7 @@ static int tea6320_initialize(struct CHIPSTATE * chip) #define TDA8425_BA 0x02 /* bass */ #define TDA8425_TR 0x03 /* treble */ #define TDA8425_S1 0x08 /* switch functions */ - /* values for those registers: */ + /* values for those registers: */ #define TDA8425_S1_OFF 0xEE /* audio off (mute on) */ #define TDA8425_S1_CH1 0xCE /* audio channel 1 (mute off) - "linear stereo" mode */ #define TDA8425_S1_CH2 0xCF /* audio channel 2 (mute off) - "linear stereo" mode */ @@ -1148,7 +1147,7 @@ static void tda8425_setmode(struct CHIPSTATE *chip, int mode) /* bit definition of the RESET register, I2C data. */ #define PIC16C54_MISC_RESET_REMOTE_CTL 0x01 /* bit 0, Reset to receive the key */ - /* code of remote controller */ + /* code of remote controller */ #define PIC16C54_MISC_MTS_MAIN 0x02 /* bit 1 */ #define PIC16C54_MISC_MTS_SAP 0x04 /* bit 2 */ #define PIC16C54_MISC_MTS_BOTH 0x08 /* bit 3 */ @@ -1281,7 +1280,7 @@ static struct CHIPDESC chiplist[] = { .setmode = tda9840_setmode, .checkmode = generic_checkmode, - .init = { 2, { TDA9840_TEST, TDA9840_TEST_INT1SN + .init = { 2, { TDA9840_TEST, TDA9840_TEST_INT1SN /* ,TDA9840_SW, TDA9840_MONO */} } }, { @@ -1438,7 +1437,7 @@ static struct CHIPDESC chiplist[] = { }, { .name = "pic16c54 (PV951)", - .id = I2C_DRIVERID_PIC16C54_PV951, + .id = I2C_DRIVERID_PIC16C54_PV9, .insmodopt = &pic16c54, .addr_lo = I2C_PIC16C54 >> 1, .addr_hi = I2C_PIC16C54>> 1, @@ -1467,7 +1466,7 @@ static struct CHIPDESC chiplist[] = { .setmode = ta8874z_setmode, .checkmode = generic_checkmode, - .init = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}}, + .init = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}}, }, { .name = NULL } /* EOF */ }; @@ -1486,8 +1485,8 @@ static int chip_attach(struct i2c_adapter *adap, int addr, int kind) return -ENOMEM; memset(chip,0,sizeof(*chip)); memcpy(&chip->c,&client_template,sizeof(struct i2c_client)); - chip->c.adapter = adap; - chip->c.addr = addr; + chip->c.adapter = adap; + chip->c.addr = addr; i2c_set_clientdata(&chip->c, chip); /* find description for the chip */ diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index 5344d5592199..72e8741e8b59 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -6,12 +6,12 @@ * which are: Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) - & Marcus Metzler (mocm@thp.uni-koeln.de) + & Marcus Metzler (mocm@thp.uni-koeln.de) (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de> * Adjustments to fit a more general model and all bugs: - Copyright (C) 2003 John Klar <linpvr at projectplasma.com> + Copyright (C) 2003 John Klar <linpvr at projectplasma.com> * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -40,6 +40,7 @@ #include <media/tuner.h> #include <media/tveeprom.h> +#include <media/audiochip.h> MODULE_DESCRIPTION("i2c Hauppauge eeprom decoder driver"); MODULE_AUTHOR("John Klar"); @@ -53,14 +54,14 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); #define tveeprom_info(fmt, arg...) do {\ printk(KERN_INFO "tveeprom %d-%04x: " fmt, \ - c->adapter->nr, c->addr , ##arg); } while (0) + c->adapter->nr, c->addr , ##arg); } while (0) #define tveeprom_warn(fmt, arg...) do {\ printk(KERN_WARNING "tveeprom %d-%04x: " fmt, \ - c->adapter->nr, c->addr , ##arg); } while (0) + c->adapter->nr, c->addr , ##arg); } while (0) #define tveeprom_dbg(fmt, arg...) do {\ if (debug) \ - printk(KERN_INFO "tveeprom %d-%04x: " fmt, \ - c->adapter->nr, c->addr , ##arg); } while (0) + printk(KERN_INFO "tveeprom %d-%04x: " fmt, \ + c->adapter->nr, c->addr , ##arg); } while (0) /* ----------------------------------------------------------------------- */ @@ -134,8 +135,8 @@ hauppauge_tuner[] = { TUNER_TEMIC_4039FR5_NTSC, "Temic 4039FR5" }, { TUNER_PHILIPS_FQ1216ME, "Philips FQ1216 ME" }, { TUNER_TEMIC_4066FY5_PAL_I, "Temic 4066FY5" }, - { TUNER_PHILIPS_NTSC, "Philips TD1536" }, - { TUNER_PHILIPS_NTSC, "Philips TD1536D" }, + { TUNER_PHILIPS_NTSC, "Philips TD1536" }, + { TUNER_PHILIPS_NTSC, "Philips TD1536D" }, { TUNER_PHILIPS_NTSC, "Philips FMR1236" }, /* mono radio */ { TUNER_ABSENT, "Philips FI1256MP" }, /* 40-49 */ @@ -189,7 +190,7 @@ hauppauge_tuner[] = { TUNER_LG_PAL_NEW_TAPC, "TCL 2002MB 3"}, { TUNER_LG_PAL_NEW_TAPC, "TCL 2002MI 3"}, { TUNER_TCL_2002N, "TCL 2002N 6A"}, - { TUNER_ABSENT, "Philips FQ1236 MK3"}, + { TUNER_PHILIPS_FM1236_MK3, "Philips FQ1236 MK3"}, { TUNER_ABSENT, "Samsung TCPN 2121P30A"}, { TUNER_ABSENT, "Samsung TCPE 4121P30A"}, { TUNER_PHILIPS_FM1216ME_MK3, "TCL MFPE05 2"}, @@ -200,95 +201,137 @@ hauppauge_tuner[] = { TUNER_ABSENT, "Philips FQ1286A MK4"}, { TUNER_ABSENT, "Philips FQ1216ME MK5"}, { TUNER_ABSENT, "Philips FQ1236 MK5"}, - { TUNER_ABSENT, "Unspecified"}, - { TUNER_LG_PAL_TAPE, "LG PAL (TAPE Series)"}, - { TUNER_ABSENT, "Unspecified"}, - { TUNER_TCL_2002N, "TCL 2002N 5H"}, - /* 100-103 */ - { TUNER_ABSENT, "Unspecified"}, - { TUNER_TEA5767, "Philips TEA5767HN FM Radio"}, - { TUNER_ABSENT, "Unspecified"}, - { TUNER_PHILIPS_FM1236_MK3, "TCL MFNM05 4"}, + { TUNER_ABSENT, "Samsung TCPG_6121P30A"}, + { TUNER_TCL_2002MB, "TCL 2002MB_3H"}, + { TUNER_ABSENT, "TCL 2002MI_3H"}, + { TUNER_TCL_2002N, "TCL 2002N 5H"}, + /* 100-109 */ + { TUNER_ABSENT, "Philips FMD1216ME"}, + { TUNER_TEA5767, "Philips TEA5768HL FM Radio"}, + { TUNER_ABSENT, "Panasonic ENV57H12D5"}, + { TUNER_ABSENT, "TCL MFNM05-4"}, + { TUNER_ABSENT, "TCL MNM05-4"}, + { TUNER_PHILIPS_FM1216ME_MK3, "TCL MPE05-2"}, + { TUNER_ABSENT, "TCL MQNM05-4"}, + { TUNER_ABSENT, "LG TAPC-W701D"}, + { TUNER_ABSENT, "TCL 9886P-WM"}, + { TUNER_ABSENT, "TCL 1676NM-WM"}, }; -/* This list is supplied by Hauppauge. Thanks! */ -static const char *audioIC[] = { - /* 0-4 */ - "None", "TEA6300", "TEA6320", "TDA9850", "MSP3400C", - /* 5-9 */ - "MSP3410D", "MSP3415", "MSP3430", "MSP3438", "CS5331", - /* 10-14 */ - "MSP3435", "MSP3440", "MSP3445", "MSP3411", "MSP3416", - /* 15-19 */ - "MSP3425", "MSP3451", "MSP3418", "Type 0x12", "OKI7716", - /* 20-24 */ - "MSP4410", "MSP4420", "MSP4440", "MSP4450", "MSP4408", - /* 25-29 */ - "MSP4418", "MSP4428", "MSP4448", "MSP4458", "Type 0x1d", - /* 30-34 */ - "CX880", "CX881", "CX883", "CX882", "CX25840", - /* 35-38 */ - "CX25841", "CX25842", "CX25843", "CX23418", +static struct HAUPPAUGE_AUDIOIC +{ + enum audiochip id; + char *name; +} +audioIC[] = +{ + /* 0-4 */ + {AUDIO_CHIP_NONE, "None"}, + {AUDIO_CHIP_TEA6300, "TEA6300"}, + {AUDIO_CHIP_TEA6300, "TEA6320"}, + {AUDIO_CHIP_TDA985X, "TDA9850"}, + {AUDIO_CHIP_MSP34XX, "MSP3400C"}, + /* 5-9 */ + {AUDIO_CHIP_MSP34XX, "MSP3410D"}, + {AUDIO_CHIP_MSP34XX, "MSP3415"}, + {AUDIO_CHIP_MSP34XX, "MSP3430"}, + {AUDIO_CHIP_UNKNOWN, "MSP3438"}, + {AUDIO_CHIP_UNKNOWN, "CS5331"}, + /* 10-14 */ + {AUDIO_CHIP_MSP34XX, "MSP3435"}, + {AUDIO_CHIP_MSP34XX, "MSP3440"}, + {AUDIO_CHIP_MSP34XX, "MSP3445"}, + {AUDIO_CHIP_UNKNOWN, "MSP3411"}, + {AUDIO_CHIP_UNKNOWN, "MSP3416"}, + /* 15-19 */ + {AUDIO_CHIP_MSP34XX, "MSP3425"}, + {AUDIO_CHIP_UNKNOWN, "MSP3451"}, + {AUDIO_CHIP_UNKNOWN, "MSP3418"}, + {AUDIO_CHIP_UNKNOWN, "Type 0x12"}, + {AUDIO_CHIP_UNKNOWN, "OKI7716"}, + /* 20-24 */ + {AUDIO_CHIP_UNKNOWN, "MSP4410"}, + {AUDIO_CHIP_UNKNOWN, "MSP4420"}, + {AUDIO_CHIP_UNKNOWN, "MSP4440"}, + {AUDIO_CHIP_UNKNOWN, "MSP4450"}, + {AUDIO_CHIP_UNKNOWN, "MSP4408"}, + /* 25-29 */ + {AUDIO_CHIP_UNKNOWN, "MSP4418"}, + {AUDIO_CHIP_UNKNOWN, "MSP4428"}, + {AUDIO_CHIP_UNKNOWN, "MSP4448"}, + {AUDIO_CHIP_UNKNOWN, "MSP4458"}, + {AUDIO_CHIP_UNKNOWN, "Type 0x1d"}, + /* 30-34 */ + {AUDIO_CHIP_INTERNAL, "CX880"}, + {AUDIO_CHIP_INTERNAL, "CX881"}, + {AUDIO_CHIP_INTERNAL, "CX883"}, + {AUDIO_CHIP_INTERNAL, "CX882"}, + {AUDIO_CHIP_INTERNAL, "CX25840"}, + /* 35-38 */ + {AUDIO_CHIP_INTERNAL, "CX25841"}, + {AUDIO_CHIP_INTERNAL, "CX25842"}, + {AUDIO_CHIP_INTERNAL, "CX25843"}, + {AUDIO_CHIP_INTERNAL, "CX23418"}, }; /* This list is supplied by Hauppauge. Thanks! */ static const char *decoderIC[] = { - /* 0-4 */ - "None", "BT815", "BT817", "BT819", "BT815A", - /* 5-9 */ - "BT817A", "BT819A", "BT827", "BT829", "BT848", - /* 10-14 */ - "BT848A", "BT849A", "BT829A", "BT827A", "BT878", - /* 15-19 */ - "BT879", "BT880", "VPX3226E", "SAA7114", "SAA7115", - /* 20-24 */ - "CX880", "CX881", "CX883", "SAA7111", "SAA7113", - /* 25-29 */ - "CX882", "TVP5150A", "CX25840", "CX25841", "CX25842", - /* 30-31 */ - "CX25843", "CX23418", + /* 0-4 */ + "None", "BT815", "BT817", "BT819", "BT815A", + /* 5-9 */ + "BT817A", "BT819A", "BT827", "BT829", "BT848", + /* 10-14 */ + "BT848A", "BT849A", "BT829A", "BT827A", "BT878", + /* 15-19 */ + "BT879", "BT880", "VPX3226E", "SAA7114", "SAA7115", + /* 20-24 */ + "CX880", "CX881", "CX883", "SAA7111", "SAA7113", + /* 25-29 */ + "CX882", "TVP5150A", "CX25840", "CX25841", "CX25842", + /* 30-31 */ + "CX25843", "CX23418", }; static int hasRadioTuner(int tunerType) { - switch (tunerType) { - case 18: //PNPEnv_TUNER_FR1236_MK2: - case 23: //PNPEnv_TUNER_FM1236: - case 38: //PNPEnv_TUNER_FMR1236: - case 16: //PNPEnv_TUNER_FR1216_MK2: - case 19: //PNPEnv_TUNER_FR1246_MK2: - case 21: //PNPEnv_TUNER_FM1216: - case 24: //PNPEnv_TUNER_FM1246: - case 17: //PNPEnv_TUNER_FR1216MF_MK2: - case 22: //PNPEnv_TUNER_FM1216MF: - case 20: //PNPEnv_TUNER_FR1256_MK2: - case 25: //PNPEnv_TUNER_FM1256: - case 33: //PNPEnv_TUNER_4039FR5: - case 42: //PNPEnv_TUNER_4009FR5: - case 52: //PNPEnv_TUNER_4049FM5: - case 54: //PNPEnv_TUNER_4049FM5_AltI2C: - case 44: //PNPEnv_TUNER_4009FN5: - case 31: //PNPEnv_TUNER_TCPB9085P: - case 30: //PNPEnv_TUNER_TCPN9085D: - case 46: //PNPEnv_TUNER_TP18NSR01F: - case 47: //PNPEnv_TUNER_TP18PSB01D: - case 49: //PNPEnv_TUNER_TAPC_I001D: - case 60: //PNPEnv_TUNER_TAPE_S001D_MK3: - case 57: //PNPEnv_TUNER_FM1216ME_MK3: - case 59: //PNPEnv_TUNER_FM1216MP_MK3: - case 58: //PNPEnv_TUNER_FM1236_MK3: - case 68: //PNPEnv_TUNER_TAPE_H001F_MK3: - case 61: //PNPEnv_TUNER_TAPE_M001D_MK3: - case 78: //PNPEnv_TUNER_TDA8275C1_8290_FM: - case 89: //PNPEnv_TUNER_TCL_MFPE05_2: - case 92: //PNPEnv_TUNER_PHILIPS_FQ1236A_MK4: - return 1; - } - return 0; + switch (tunerType) { + case 18: //PNPEnv_TUNER_FR1236_MK2: + case 23: //PNPEnv_TUNER_FM1236: + case 38: //PNPEnv_TUNER_FMR1236: + case 16: //PNPEnv_TUNER_FR1216_MK2: + case 19: //PNPEnv_TUNER_FR1246_MK2: + case 21: //PNPEnv_TUNER_FM1216: + case 24: //PNPEnv_TUNER_FM1246: + case 17: //PNPEnv_TUNER_FR1216MF_MK2: + case 22: //PNPEnv_TUNER_FM1216MF: + case 20: //PNPEnv_TUNER_FR1256_MK2: + case 25: //PNPEnv_TUNER_FM1256: + case 33: //PNPEnv_TUNER_4039FR5: + case 42: //PNPEnv_TUNER_4009FR5: + case 52: //PNPEnv_TUNER_4049FM5: + case 54: //PNPEnv_TUNER_4049FM5_AltI2C: + case 44: //PNPEnv_TUNER_4009FN5: + case 31: //PNPEnv_TUNER_TCPB9085P: + case 30: //PNPEnv_TUNER_TCPN9085D: + case 46: //PNPEnv_TUNER_TP18NSR01F: + case 47: //PNPEnv_TUNER_TP18PSB01D: + case 49: //PNPEnv_TUNER_TAPC_I001D: + case 60: //PNPEnv_TUNER_TAPE_S001D_MK3: + case 57: //PNPEnv_TUNER_FM1216ME_MK3: + case 59: //PNPEnv_TUNER_FM1216MP_MK3: + case 58: //PNPEnv_TUNER_FM1236_MK3: + case 68: //PNPEnv_TUNER_TAPE_H001F_MK3: + case 61: //PNPEnv_TUNER_TAPE_M001D_MK3: + case 78: //PNPEnv_TUNER_TDA8275C1_8290_FM: + case 89: //PNPEnv_TUNER_TCL_MFPE05_2: + case 92: //PNPEnv_TUNER_PHILIPS_FQ1236A_MK4: + return 1; + } + return 0; } void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, - unsigned char *eeprom_data) + unsigned char *eeprom_data) { /* ---------------------------------------------- ** The hauppauge eeprom format is tagged @@ -312,19 +355,27 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, ** # of inputs/outputs ??? */ - int i, j, len, done, beenhere, tag; + int i, j, len, done, beenhere, tag,start; - int tuner1 = 0, t_format1 = 0; + int tuner1 = 0, t_format1 = 0, audioic=-1; char *t_name1 = NULL; - const char *t_fmt_name1[8] = { " none", "", "", "", "", "", "", "" }; + const char *t_fmt_name1[8] = { " none", "", "", "", "", "", "", "" }; - int tuner2 = 0, t_format2 = 0; + int tuner2 = 0, t_format2 = 0; char *t_name2 = NULL; - const char *t_fmt_name2[8] = { " none", "", "", "", "", "", "", "" }; + const char *t_fmt_name2[8] = { " none", "", "", "", "", "", "", "" }; - memset(tvee, 0, sizeof(*tvee)); + memset(tvee, 0, sizeof(*tvee)); done = len = beenhere = 0; - for (i = 0; !done && i < 256; i += len) { + + /* Hack for processing eeprom for em28xx */ + if ((eeprom_data[0]==0x1a)&&(eeprom_data[1]==0xeb)&& + (eeprom_data[2]==0x67)&&(eeprom_data[3]==0x95)) + start=0xa0; + else + start=0; + + for (i = start; !done && i < 256; i += len) { if (eeprom_data[i] == 0x84) { len = eeprom_data[i + 1] + (eeprom_data[i + 2] << 8); i += 3; @@ -338,28 +389,28 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, ++i; } else { tveeprom_warn("Encountered bad packet header [%02x]. " - "Corrupt or not a Hauppauge eeprom.\n", eeprom_data[i]); + "Corrupt or not a Hauppauge eeprom.\n", eeprom_data[i]); return; } - if (debug) { - tveeprom_info("Tag [%02x] + %d bytes:", eeprom_data[i], len - 1); - for(j = 1; j < len; j++) { - printk(" %02x", eeprom_data[i + j]); - } - printk("\n"); - } + if (debug) { + tveeprom_info("Tag [%02x] + %d bytes:", eeprom_data[i], len - 1); + for(j = 1; j < len; j++) { + printk(" %02x", eeprom_data[i + j]); + } + printk("\n"); + } /* process by tag */ tag = eeprom_data[i]; switch (tag) { case 0x00: - /* tag: 'Comprehensive' */ + /* tag: 'Comprehensive' */ tuner1 = eeprom_data[i+6]; t_format1 = eeprom_data[i+5]; tvee->has_radio = eeprom_data[i+len-1]; - /* old style tag, don't know how to detect - IR presence, mark as unknown. */ + /* old style tag, don't know how to detect + IR presence, mark as unknown. */ tvee->has_ir = 2; tvee->model = eeprom_data[i+8] + @@ -370,7 +421,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, break; case 0x01: - /* tag: 'SerialID' */ + /* tag: 'SerialID' */ tvee->serial_number = eeprom_data[i+6] + (eeprom_data[i+7] << 8) + @@ -378,17 +429,21 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, break; case 0x02: - /* tag 'AudioInfo' - Note mask with 0x7F, high bit used on some older models - to indicate 4052 mux was removed in favor of using MSP - inputs directly. */ - tvee->audio_processor = eeprom_data[i+2] & 0x7f; + /* tag 'AudioInfo' + Note mask with 0x7F, high bit used on some older models + to indicate 4052 mux was removed in favor of using MSP + inputs directly. */ + audioic = eeprom_data[i+2] & 0x7f; + if (audioic < sizeof(audioIC)/sizeof(*audioIC)) + tvee->audio_processor = audioIC[audioic].id; + else + tvee->audio_processor = AUDIO_CHIP_UNKNOWN; break; - /* case 0x03: tag 'EEInfo' */ + /* case 0x03: tag 'EEInfo' */ case 0x04: - /* tag 'SerialID2' */ + /* tag 'SerialID2' */ tvee->serial_number = eeprom_data[i+5] + (eeprom_data[i+6] << 8) + @@ -396,15 +451,20 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, break; case 0x05: - /* tag 'Audio2' - Note mask with 0x7F, high bit used on some older models - to indicate 4052 mux was removed in favor of using MSP - inputs directly. */ - tvee->audio_processor = eeprom_data[i+1] & 0x7f; + /* tag 'Audio2' + Note mask with 0x7F, high bit used on some older models + to indicate 4052 mux was removed in favor of using MSP + inputs directly. */ + audioic = eeprom_data[i+1] & 0x7f; + if (audioic < sizeof(audioIC)/sizeof(*audioIC)) + tvee->audio_processor = audioIC[audioic].id; + else + tvee->audio_processor = AUDIO_CHIP_UNKNOWN; + break; case 0x06: - /* tag 'ModelRev' */ + /* tag 'ModelRev' */ tvee->model = eeprom_data[i+1] + (eeprom_data[i+2] << 8); @@ -414,55 +474,55 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, break; case 0x07: - /* tag 'Details': according to Hauppauge not interesting - on any PCI-era or later boards. */ + /* tag 'Details': according to Hauppauge not interesting + on any PCI-era or later boards. */ break; - /* there is no tag 0x08 defined */ + /* there is no tag 0x08 defined */ case 0x09: - /* tag 'Video' */ + /* tag 'Video' */ tvee->decoder_processor = eeprom_data[i + 1]; break; case 0x0a: - /* tag 'Tuner' */ + /* tag 'Tuner' */ if (beenhere == 0) { tuner1 = eeprom_data[i+2]; t_format1 = eeprom_data[i+1]; beenhere = 1; } else { - /* a second (radio) tuner may be present */ + /* a second (radio) tuner may be present */ tuner2 = eeprom_data[i+2]; t_format2 = eeprom_data[i+1]; - if (t_format2 == 0) { /* not a TV tuner? */ - tvee->has_radio = 1; /* must be radio */ - } - } + if (t_format2 == 0) { /* not a TV tuner? */ + tvee->has_radio = 1; /* must be radio */ + } + } break; - case 0x0b: - /* tag 'Inputs': according to Hauppauge this is specific - to each driver family, so no good assumptions can be - made. */ - break; + case 0x0b: + /* tag 'Inputs': according to Hauppauge this is specific + to each driver family, so no good assumptions can be + made. */ + break; - /* case 0x0c: tag 'Balun' */ - /* case 0x0d: tag 'Teletext' */ + /* case 0x0c: tag 'Balun' */ + /* case 0x0d: tag 'Teletext' */ case 0x0e: - /* tag: 'Radio' */ + /* tag: 'Radio' */ tvee->has_radio = eeprom_data[i+1]; break; - case 0x0f: - /* tag 'IRInfo' */ - tvee->has_ir = eeprom_data[i+1]; - break; + case 0x0f: + /* tag 'IRInfo' */ + tvee->has_ir = eeprom_data[i+1]; + break; - /* case 0x10: tag 'VBIInfo' */ - /* case 0x11: tag 'QCInfo' */ - /* case 0x12: tag 'InfoBits' */ + /* case 0x10: tag 'VBIInfo' */ + /* case 0x11: tag 'QCInfo' */ + /* case 0x12: tag 'InfoBits' */ default: tveeprom_dbg("Not sure what to do with tag [%02x]\n", tag); @@ -483,11 +543,11 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, tvee->rev_str[4] = 0; } - if (hasRadioTuner(tuner1) && !tvee->has_radio) { - tveeprom_info("The eeprom says no radio is present, but the tuner type\n"); - tveeprom_info("indicates otherwise. I will assume that radio is present.\n"); - tvee->has_radio = 1; - } + if (hasRadioTuner(tuner1) && !tvee->has_radio) { + tveeprom_info("The eeprom says no radio is present, but the tuner type\n"); + tveeprom_info("indicates otherwise. I will assume that radio is present.\n"); + tvee->has_radio = 1; + } if (tuner1 < sizeof(hauppauge_tuner)/sizeof(struct HAUPPAUGE_TUNER)) { tvee->tuner_type = hauppauge_tuner[tuner1].id; @@ -510,45 +570,53 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, tvee->tuner_formats |= hauppauge_tuner_fmt[i].id; t_fmt_name1[j++] = hauppauge_tuner_fmt[i].name; } - if (t_format2 & (1 << i)) { - tvee->tuner2_formats |= hauppauge_tuner_fmt[i].id; - t_fmt_name2[j++] = hauppauge_tuner_fmt[i].name; - } + if (t_format2 & (1 << i)) { + tvee->tuner2_formats |= hauppauge_tuner_fmt[i].id; + t_fmt_name2[j++] = hauppauge_tuner_fmt[i].name; + } } tveeprom_info("Hauppauge model %d, rev %s, serial# %d\n", - tvee->model, tvee->rev_str, tvee->serial_number); + tvee->model, tvee->rev_str, tvee->serial_number); tveeprom_info("tuner model is %s (idx %d, type %d)\n", - t_name1, tuner1, tvee->tuner_type); + t_name1, tuner1, tvee->tuner_type); tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n", - t_fmt_name1[0], t_fmt_name1[1], t_fmt_name1[2], t_fmt_name1[3], - t_fmt_name1[4], t_fmt_name1[5], t_fmt_name1[6], t_fmt_name1[7], - t_format1); - if (tuner2) { - tveeprom_info("second tuner model is %s (idx %d, type %d)\n", - t_name2, tuner2, tvee->tuner2_type); - } - if (t_format2) { - tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n", - t_fmt_name2[0], t_fmt_name2[1], t_fmt_name2[2], t_fmt_name2[3], - t_fmt_name2[4], t_fmt_name2[5], t_fmt_name2[6], t_fmt_name2[7], - t_format2); - } - tveeprom_info("audio processor is %s (idx %d)\n", - STRM(audioIC, tvee->audio_processor), - tvee->audio_processor); - if (tvee->decoder_processor) { - tveeprom_info("decoder processor is %s (idx %d)\n", - STRM(decoderIC, tvee->decoder_processor), - tvee->decoder_processor); - } - if (tvee->has_ir == 2) - tveeprom_info("has %sradio\n", - tvee->has_radio ? "" : "no "); - else - tveeprom_info("has %sradio, has %sIR remote\n", - tvee->has_radio ? "" : "no ", - tvee->has_ir ? "" : "no "); + t_fmt_name1[0], t_fmt_name1[1], t_fmt_name1[2], t_fmt_name1[3], + t_fmt_name1[4], t_fmt_name1[5], t_fmt_name1[6], t_fmt_name1[7], + t_format1); + if (tuner2) { + tveeprom_info("second tuner model is %s (idx %d, type %d)\n", + t_name2, tuner2, tvee->tuner2_type); + } + if (t_format2) { + tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n", + t_fmt_name2[0], t_fmt_name2[1], t_fmt_name2[2], t_fmt_name2[3], + t_fmt_name2[4], t_fmt_name2[5], t_fmt_name2[6], t_fmt_name2[7], + t_format2); + } + if (audioic<0) { + tveeprom_info("audio processor is unknown (no idx)\n"); + tvee->audio_processor=AUDIO_CHIP_UNKNOWN; + } else { + if (audioic < sizeof(audioIC)/sizeof(*audioIC)) + tveeprom_info("audio processor is %s (idx %d)\n", + audioIC[audioic].name,audioic); + else + tveeprom_info("audio processor is unknown (idx %d)\n", + audioic); + } + if (tvee->decoder_processor) { + tveeprom_info("decoder processor is %s (idx %d)\n", + STRM(decoderIC, tvee->decoder_processor), + tvee->decoder_processor); + } + if (tvee->has_ir == 2) + tveeprom_info("has %sradio\n", + tvee->has_radio ? "" : "no "); + else + tveeprom_info("has %sradio, has %sIR remote\n", + tvee->has_radio ? "" : "no ", + tvee->has_ir ? "" : "no "); } EXPORT_SYMBOL(tveeprom_hauppauge_analog); @@ -569,18 +637,18 @@ int tveeprom_read(struct i2c_client *c, unsigned char *eedata, int len) tveeprom_warn("i2c eeprom read error (err=%d)\n", err); return -1; } - if (debug) { - int i; - - tveeprom_info("full 256-byte eeprom dump:\n"); - for (i = 0; i < len; i++) { - if (0 == (i % 16)) - tveeprom_info("%02x:", i); - printk(" %02x", eedata[i]); - if (15 == (i % 16)) - printk("\n"); - } - } + if (debug) { + int i; + + tveeprom_info("full 256-byte eeprom dump:\n"); + for (i = 0; i < len; i++) { + if (0 == (i % 16)) + tveeprom_info("%02x:", i); + printk(" %02x", eedata[i]); + if (15 == (i % 16)) + printk("\n"); + } + } return 0; } EXPORT_SYMBOL(tveeprom_read); @@ -590,10 +658,6 @@ EXPORT_SYMBOL(tveeprom_read); /* run, just call the exported tveeprom_* directly, there is no point in */ /* using the indirect way via i2c_driver->command() */ -#ifndef I2C_DRIVERID_TVEEPROM -# define I2C_DRIVERID_TVEEPROM I2C_DRIVERID_EXP2 -#endif - static unsigned short normal_i2c[] = { 0xa0 >> 1, I2C_CLIENT_END, diff --git a/drivers/media/video/tvmixer.c b/drivers/media/video/tvmixer.c index d86e08ebddfc..8318bd1aad00 100644 --- a/drivers/media/video/tvmixer.c +++ b/drivers/media/video/tvmixer.c @@ -79,7 +79,7 @@ static int tvmixer_ioctl(struct inode *inode, struct file *file, unsigned int cm { struct video_audio va; int left,right,ret,val = 0; - struct TVMIXER *mix = file->private_data; + struct TVMIXER *mix = file->private_data; struct i2c_client *client = mix->dev; void __user *argp = (void __user *)arg; int __user *p = argp; @@ -87,25 +87,25 @@ static int tvmixer_ioctl(struct inode *inode, struct file *file, unsigned int cm if (NULL == client) return -ENODEV; - if (cmd == SOUND_MIXER_INFO) { - mixer_info info; - strlcpy(info.id, "tv card", sizeof(info.id)); - strlcpy(info.name, client->name, sizeof(info.name)); - info.modify_counter = 42 /* FIXME */; - if (copy_to_user(argp, &info, sizeof(info))) - return -EFAULT; - return 0; - } - if (cmd == SOUND_OLD_MIXER_INFO) { - _old_mixer_info info; - strlcpy(info.id, "tv card", sizeof(info.id)); - strlcpy(info.name, client->name, sizeof(info.name)); - if (copy_to_user(argp, &info, sizeof(info))) - return -EFAULT; - return 0; - } - if (cmd == OSS_GETVERSION) - return put_user(SOUND_VERSION, p); + if (cmd == SOUND_MIXER_INFO) { + mixer_info info; + strlcpy(info.id, "tv card", sizeof(info.id)); + strlcpy(info.name, client->name, sizeof(info.name)); + info.modify_counter = 42 /* FIXME */; + if (copy_to_user(argp, &info, sizeof(info))) + return -EFAULT; + return 0; + } + if (cmd == SOUND_OLD_MIXER_INFO) { + _old_mixer_info info; + strlcpy(info.id, "tv card", sizeof(info.id)); + strlcpy(info.name, client->name, sizeof(info.name)); + if (copy_to_user(argp, &info, sizeof(info))) + return -EFAULT; + return 0; + } + if (cmd == OSS_GETVERSION) + return put_user(SOUND_VERSION, p); if (_SIOC_DIR(cmd) & _SIOC_WRITE) if (get_user(val, p)) @@ -181,8 +181,8 @@ static int tvmixer_ioctl(struct inode *inode, struct file *file, unsigned int cm static int tvmixer_open(struct inode *inode, struct file *file) { - int i, minor = iminor(inode); - struct TVMIXER *mix = NULL; + int i, minor = iminor(inode); + struct TVMIXER *mix = NULL; struct i2c_client *client = NULL; for (i = 0; i < DEV_MAX; i++) { @@ -204,7 +204,7 @@ static int tvmixer_open(struct inode *inode, struct file *file) #endif if (client->adapter->owner) try_module_get(client->adapter->owner); - return 0; + return 0; } static int tvmixer_release(struct inode *inode, struct file *file) @@ -231,15 +231,15 @@ static struct i2c_driver driver = { .owner = THIS_MODULE, #endif .name = "tv card mixer driver", - .id = I2C_DRIVERID_TVMIXER, + .id = I2C_DRIVERID_TVMIXER, #ifdef I2C_DF_DUMMY .flags = I2C_DF_DUMMY, #else .flags = I2C_DF_NOTIFY, - .detach_adapter = tvmixer_adapters, + .detach_adapter = tvmixer_adapters, #endif - .attach_adapter = tvmixer_adapters, - .detach_client = tvmixer_clients, + .attach_adapter = tvmixer_adapters, + .detach_client = tvmixer_clients, }; static struct file_operations tvmixer_fops = { diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c new file mode 100644 index 000000000000..81e6d4494e7d --- /dev/null +++ b/drivers/media/video/tvp5150.c @@ -0,0 +1,829 @@ +/* + * tvp5150 - Texas Instruments TVP5150A(M) video decoder driver + * + * Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@brturbo.com.br) + * This code is placed under the terms of the GNU General Public License + */ + +#include <linux/i2c.h> +#include <linux/videodev.h> +#include <linux/delay.h> +#include <linux/video_decoder.h> + +#include "tvp5150_reg.h" + +MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver"); /* standard i2c insmod options */ +MODULE_AUTHOR("Mauro Carvalho Chehab"); +MODULE_LICENSE("GPL"); + +static unsigned short normal_i2c[] = { + 0xb8 >> 1, + 0xba >> 1, + I2C_CLIENT_END +}; + +I2C_CLIENT_INSMOD; + +static int debug = 0; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + +#define dprintk(num, format, args...) \ + do { \ + if (debug >= num) \ + printk(format , ##args); \ + } while (0) + +/* supported controls */ +static struct v4l2_queryctrl tvp5150_qctrl[] = { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 255, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = 0, + .maximum = 255, + .step = 0x1, + .default_value = 0x10, + .flags = 0, + }, { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Saturation", + .minimum = 0, + .maximum = 255, + .step = 0x1, + .default_value = 0x10, + .flags = 0, + }, { + .id = V4L2_CID_HUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Hue", + .minimum = -128, + .maximum = 127, + .step = 0x1, + .default_value = 0x10, + .flags = 0, + } +}; + +struct tvp5150 { + struct i2c_client *client; + + int norm; + int input; + int enable; + int bright; + int contrast; + int hue; + int sat; +}; + +static inline int tvp5150_read(struct i2c_client *c, unsigned char addr) +{ + unsigned char buffer[1]; + int rc; + + buffer[0] = addr; + if (1 != (rc = i2c_master_send(c, buffer, 1))) + dprintk(0, "i2c i/o error: rc == %d (should be 1)\n", rc); + + msleep(10); + + if (1 != (rc = i2c_master_recv(c, buffer, 1))) + dprintk(0, "i2c i/o error: rc == %d (should be 1)\n", rc); + + return (buffer[0]); +} + +static inline void tvp5150_write(struct i2c_client *c, unsigned char addr, + unsigned char value) +{ + unsigned char buffer[2]; + int rc; +/* struct tvp5150 *core = i2c_get_clientdata(c); */ + + buffer[0] = addr; + buffer[1] = value; + dprintk(1, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]); + if (2 != (rc = i2c_master_send(c, buffer, 2))) + dprintk(0, "i2c i/o error: rc == %d (should be 2)\n", rc); +} + +static void dump_reg(struct i2c_client *c) +{ + printk("tvp5150: Video input source selection #1 = 0x%02x\n", + tvp5150_read(c, TVP5150_VD_IN_SRC_SEL_1)); + printk("tvp5150: Analog channel controls = 0x%02x\n", + tvp5150_read(c, TVP5150_ANAL_CHL_CTL)); + printk("tvp5150: Operation mode controls = 0x%02x\n", + tvp5150_read(c, TVP5150_OP_MODE_CTL)); + printk("tvp5150: Miscellaneous controls = 0x%02x\n", + tvp5150_read(c, TVP5150_MISC_CTL)); + printk("tvp5150: Autoswitch mask: TVP5150A / TVP5150AM = 0x%02x\n", + tvp5150_read(c, TVP5150_AUTOSW_MSK)); + printk("tvp5150: Color killer threshold control = 0x%02x\n", + tvp5150_read(c, TVP5150_COLOR_KIL_THSH_CTL)); + printk("tvp5150: Luminance processing control #1 = 0x%02x\n", + tvp5150_read(c, TVP5150_LUMA_PROC_CTL_1)); + printk("tvp5150: Luminance processing control #2 = 0x%02x\n", + tvp5150_read(c, TVP5150_LUMA_PROC_CTL_2)); + printk("tvp5150: Brightness control = 0x%02x\n", + tvp5150_read(c, TVP5150_BRIGHT_CTL)); + printk("tvp5150: Color saturation control = 0x%02x\n", + tvp5150_read(c, TVP5150_SATURATION_CTL)); + printk("tvp5150: Hue control = 0x%02x\n", + tvp5150_read(c, TVP5150_HUE_CTL)); + printk("tvp5150: Contrast control = 0x%02x\n", + tvp5150_read(c, TVP5150_CONTRAST_CTL)); + printk("tvp5150: Outputs and data rates select = 0x%02x\n", + tvp5150_read(c, TVP5150_DATA_RATE_SEL)); + printk("tvp5150: Luminance processing control #3 = 0x%02x\n", + tvp5150_read(c, TVP5150_LUMA_PROC_CTL_3)); + printk("tvp5150: Configuration shared pins = 0x%02x\n", + tvp5150_read(c, TVP5150_CONF_SHARED_PIN)); + printk("tvp5150: Active video cropping start MSB = 0x%02x\n", + tvp5150_read(c, TVP5150_ACT_VD_CROP_ST_MSB)); + printk("tvp5150: Active video cropping start LSB = 0x%02x\n", + tvp5150_read(c, TVP5150_ACT_VD_CROP_ST_LSB)); + printk("tvp5150: Active video cropping stop MSB = 0x%02x\n", + tvp5150_read(c, TVP5150_ACT_VD_CROP_STP_MSB)); + printk("tvp5150: Active video cropping stop LSB = 0x%02x\n", + tvp5150_read(c, TVP5150_ACT_VD_CROP_STP_LSB)); + printk("tvp5150: Genlock/RTC = 0x%02x\n", + tvp5150_read(c, TVP5150_GENLOCK)); + printk("tvp5150: Horizontal sync start = 0x%02x\n", + tvp5150_read(c, TVP5150_HORIZ_SYNC_START)); + printk("tvp5150: Vertical blanking start = 0x%02x\n", + tvp5150_read(c, TVP5150_VERT_BLANKING_START)); + printk("tvp5150: Vertical blanking stop = 0x%02x\n", + tvp5150_read(c, TVP5150_VERT_BLANKING_STOP)); + printk("tvp5150: Chrominance processing control #1 = 0x%02x\n", + tvp5150_read(c, TVP5150_CHROMA_PROC_CTL_1)); + printk("tvp5150: Chrominance processing control #2 = 0x%02x\n", + tvp5150_read(c, TVP5150_CHROMA_PROC_CTL_2)); + printk("tvp5150: Interrupt reset register B = 0x%02x\n", + tvp5150_read(c, TVP5150_INT_RESET_REG_B)); + printk("tvp5150: Interrupt enable register B = 0x%02x\n", + tvp5150_read(c, TVP5150_INT_ENABLE_REG_B)); + printk("tvp5150: Interrupt configuration register B = 0x%02x\n", + tvp5150_read(c, TVP5150_INTT_CONFIG_REG_B)); + printk("tvp5150: Video standard = 0x%02x\n", + tvp5150_read(c, TVP5150_VIDEO_STD)); + printk("tvp5150: Cb gain factor = 0x%02x\n", + tvp5150_read(c, TVP5150_CB_GAIN_FACT)); + printk("tvp5150: Cr gain factor = 0x%02x\n", + tvp5150_read(c, TVP5150_CR_GAIN_FACTOR)); + printk("tvp5150: Macrovision on counter = 0x%02x\n", + tvp5150_read(c, TVP5150_MACROVISION_ON_CTR)); + printk("tvp5150: Macrovision off counter = 0x%02x\n", + tvp5150_read(c, TVP5150_MACROVISION_OFF_CTR)); + printk("tvp5150: revision select (TVP5150AM1 only) = 0x%02x\n", + tvp5150_read(c, TVP5150_REV_SELECT)); + printk("tvp5150: MSB of device ID = 0x%02x\n", + tvp5150_read(c, TVP5150_MSB_DEV_ID)); + printk("tvp5150: LSB of device ID = 0x%02x\n", + tvp5150_read(c, TVP5150_LSB_DEV_ID)); + printk("tvp5150: ROM major version = 0x%02x\n", + tvp5150_read(c, TVP5150_ROM_MAJOR_VER)); + printk("tvp5150: ROM minor version = 0x%02x\n", + tvp5150_read(c, TVP5150_ROM_MINOR_VER)); + printk("tvp5150: Vertical line count MSB = 0x%02x\n", + tvp5150_read(c, TVP5150_VERT_LN_COUNT_MSB)); + printk("tvp5150: Vertical line count LSB = 0x%02x\n", + tvp5150_read(c, TVP5150_VERT_LN_COUNT_LSB)); + printk("tvp5150: Interrupt status register B = 0x%02x\n", + tvp5150_read(c, TVP5150_INT_STATUS_REG_B)); + printk("tvp5150: Interrupt active register B = 0x%02x\n", + tvp5150_read(c, TVP5150_INT_ACTIVE_REG_B)); + printk("tvp5150: Status register #1 = 0x%02x\n", + tvp5150_read(c, TVP5150_STATUS_REG_1)); + printk("tvp5150: Status register #2 = 0x%02x\n", + tvp5150_read(c, TVP5150_STATUS_REG_2)); + printk("tvp5150: Status register #3 = 0x%02x\n", + tvp5150_read(c, TVP5150_STATUS_REG_3)); + printk("tvp5150: Status register #4 = 0x%02x\n", + tvp5150_read(c, TVP5150_STATUS_REG_4)); + printk("tvp5150: Status register #5 = 0x%02x\n", + tvp5150_read(c, TVP5150_STATUS_REG_5)); + printk("tvp5150: Closed caption data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_CC_DATA_REG1)); + printk("tvp5150: Closed caption data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_CC_DATA_REG2)); + printk("tvp5150: Closed caption data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_CC_DATA_REG3)); + printk("tvp5150: Closed caption data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_CC_DATA_REG4)); + printk("tvp5150: WSS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_WSS_DATA_REG1)); + printk("tvp5150: WSS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_WSS_DATA_REG2)); + printk("tvp5150: WSS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_WSS_DATA_REG3)); + printk("tvp5150: WSS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_WSS_DATA_REG4)); + printk("tvp5150: WSS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_WSS_DATA_REG5)); + printk("tvp5150: WSS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_WSS_DATA_REG6)); + printk("tvp5150: VPS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VPS_DATA_REG1)); + printk("tvp5150: VPS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VPS_DATA_REG2)); + printk("tvp5150: VPS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VPS_DATA_REG3)); + printk("tvp5150: VPS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VPS_DATA_REG4)); + printk("tvp5150: VPS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VPS_DATA_REG5)); + printk("tvp5150: VPS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VPS_DATA_REG6)); + printk("tvp5150: VPS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VPS_DATA_REG7)); + printk("tvp5150: VPS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VPS_DATA_REG8)); + printk("tvp5150: VPS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VPS_DATA_REG9)); + printk("tvp5150: VPS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VPS_DATA_REG10)); + printk("tvp5150: VPS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VPS_DATA_REG11)); + printk("tvp5150: VPS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VPS_DATA_REG12)); + printk("tvp5150: VPS data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VPS_DATA_REG13)); + printk("tvp5150: VITC data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VITC_DATA_REG1)); + printk("tvp5150: VITC data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VITC_DATA_REG2)); + printk("tvp5150: VITC data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VITC_DATA_REG3)); + printk("tvp5150: VITC data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VITC_DATA_REG4)); + printk("tvp5150: VITC data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VITC_DATA_REG5)); + printk("tvp5150: VITC data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VITC_DATA_REG6)); + printk("tvp5150: VITC data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VITC_DATA_REG7)); + printk("tvp5150: VITC data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VITC_DATA_REG8)); + printk("tvp5150: VITC data registers = 0x%02x\n", + tvp5150_read(c, TVP5150_VITC_DATA_REG9)); + printk("tvp5150: VBI FIFO read data = 0x%02x\n", + tvp5150_read(c, TVP5150_VBI_FIFO_READ_DATA)); + printk("tvp5150: Teletext filter 1 = 0x%02x\n", + tvp5150_read(c, TVP5150_TELETEXT_FIL_1_1)); + printk("tvp5150: Teletext filter 1 = 0x%02x\n", + tvp5150_read(c, TVP5150_TELETEXT_FIL_1_2)); + printk("tvp5150: Teletext filter 1 = 0x%02x\n", + tvp5150_read(c, TVP5150_TELETEXT_FIL_1_3)); + printk("tvp5150: Teletext filter 1 = 0x%02x\n", + tvp5150_read(c, TVP5150_TELETEXT_FIL_1_4)); + printk("tvp5150: Teletext filter 1 = 0x%02x\n", + tvp5150_read(c, TVP5150_TELETEXT_FIL_1_5)); + printk("tvp5150: Teletext filter 2 = 0x%02x\n", + tvp5150_read(c, TVP5150_TELETEXT_FIL_2_1)); + printk("tvp5150: Teletext filter 2 = 0x%02x\n", + tvp5150_read(c, TVP5150_TELETEXT_FIL_2_2)); + printk("tvp5150: Teletext filter 2 = 0x%02x\n", + tvp5150_read(c, TVP5150_TELETEXT_FIL_2_3)); + printk("tvp5150: Teletext filter 2 = 0x%02x\n", + tvp5150_read(c, TVP5150_TELETEXT_FIL_2_4)); + printk("tvp5150: Teletext filter 2 = 0x%02x\n", + tvp5150_read(c, TVP5150_TELETEXT_FIL_2_5)); + printk("tvp5150: Teletext filter enable = 0x%02x\n", + tvp5150_read(c, TVP5150_TELETEXT_FIL_ENA)); + printk("tvp5150: Interrupt status register A = 0x%02x\n", + tvp5150_read(c, TVP5150_INT_STATUS_REG_A)); + printk("tvp5150: Interrupt enable register A = 0x%02x\n", + tvp5150_read(c, TVP5150_INT_ENABLE_REG_A)); + printk("tvp5150: Interrupt configuration = 0x%02x\n", + tvp5150_read(c, TVP5150_INT_CONF)); + printk("tvp5150: VDP configuration RAM data = 0x%02x\n", + tvp5150_read(c, TVP5150_VDP_CONF_RAM_DATA)); + printk("tvp5150: Configuration RAM address low byte = 0x%02x\n", + tvp5150_read(c, TVP5150_CONF_RAM_ADDR_LOW)); + printk("tvp5150: Configuration RAM address high byte = 0x%02x\n", + tvp5150_read(c, TVP5150_CONF_RAM_ADDR_HIGH)); + printk("tvp5150: VDP status register = 0x%02x\n", + tvp5150_read(c, TVP5150_VDP_STATUS_REG)); + printk("tvp5150: FIFO word count = 0x%02x\n", + tvp5150_read(c, TVP5150_FIFO_WORD_COUNT)); + printk("tvp5150: FIFO interrupt threshold = 0x%02x\n", + tvp5150_read(c, TVP5150_FIFO_INT_THRESHOLD)); + printk("tvp5150: FIFO reset = 0x%02x\n", + tvp5150_read(c, TVP5150_FIFO_RESET)); + printk("tvp5150: Line number interrupt = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_NUMBER_INT)); + printk("tvp5150: Pixel alignment register low byte = 0x%02x\n", + tvp5150_read(c, TVP5150_PIX_ALIGN_REG_LOW)); + printk("tvp5150: Pixel alignment register high byte = 0x%02x\n", + tvp5150_read(c, TVP5150_PIX_ALIGN_REG_HIGH)); + printk("tvp5150: FIFO output control = 0x%02x\n", + tvp5150_read(c, TVP5150_FIFO_OUT_CTRL)); + printk("tvp5150: Full field enable 1 = 0x%02x\n", + tvp5150_read(c, TVP5150_FULL_FIELD_ENA_1)); + printk("tvp5150: Full field enable 2 = 0x%02x\n", + tvp5150_read(c, TVP5150_FULL_FIELD_ENA_2)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_1)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_2)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_3)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_4)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_5)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_6)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_7)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_8)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_9)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_10)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_11)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_12)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_13)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_14)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_15)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_16)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_17)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_18)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_19)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_20)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_21)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_22)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_23)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_24)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_25)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_27)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_28)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_29)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_30)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_31)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_32)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_33)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_34)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_35)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_36)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_37)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_38)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_39)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_40)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_41)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_42)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_43)); + printk("tvp5150: Line mode registers = 0x%02x\n", + tvp5150_read(c, TVP5150_LINE_MODE_REG_44)); + printk("tvp5150: Full field mode register = 0x%02x\n", + tvp5150_read(c, TVP5150_FULL_FIELD_MODE_REG)); +} + +/**************************************************************************** + Basic functions + ****************************************************************************/ +enum tvp5150_input { + TVP5150_ANALOG_CH0 = 0, + TVP5150_SVIDEO = 1, + TVP5150_ANALOG_CH1 = 2, + TVP5150_BLACK_SCREEN = 8 +}; + +static inline void tvp5150_selmux(struct i2c_client *c, + enum tvp5150_input input) +{ + struct tvp5150 *decoder = i2c_get_clientdata(c); + + if (!decoder->enable) + input |= TVP5150_BLACK_SCREEN; + + tvp5150_write(c, TVP5150_VD_IN_SRC_SEL_1, input); +}; + +static inline void tvp5150_reset(struct i2c_client *c) +{ + struct tvp5150 *decoder = i2c_get_clientdata(c); + + tvp5150_write(c, TVP5150_CONF_SHARED_PIN, 2); + + /* Automatic offset and AGC enabled */ + tvp5150_write(c, TVP5150_ANAL_CHL_CTL, 0x15); + + /* Normal Operation */ +// tvp5150_write(c, TVP5150_OP_MODE_CTL, 0x00); + + /* Activate YCrCb output 0x9 or 0xd ? */ + tvp5150_write(c, TVP5150_MISC_CTL, 0x6f); + + /* Activates video std autodetection for all standards */ + tvp5150_write(c, TVP5150_AUTOSW_MSK, 0x0); + + /* Default format: 0x47, 4:2:2: 0x40 */ + tvp5150_write(c, TVP5150_DATA_RATE_SEL, 0x47); + + tvp5150_selmux(c, decoder->input); + + tvp5150_write(c, TVP5150_CHROMA_PROC_CTL_1, 0x0c); + tvp5150_write(c, TVP5150_CHROMA_PROC_CTL_2, 0x54); + + tvp5150_write(c, 0x27, 0x20); /* ?????????? */ + + tvp5150_write(c, TVP5150_VIDEO_STD, 0x0); /* Auto switch */ + + tvp5150_write(c, TVP5150_BRIGHT_CTL, decoder->bright >> 8); + tvp5150_write(c, TVP5150_CONTRAST_CTL, decoder->contrast >> 8); + tvp5150_write(c, TVP5150_SATURATION_CTL, decoder->contrast >> 8); + tvp5150_write(c, TVP5150_HUE_CTL, (decoder->hue - 32768) >> 8); +}; + +static int tvp5150_get_ctrl(struct i2c_client *c, struct v4l2_control *ctrl) +{ +/* struct tvp5150 *decoder = i2c_get_clientdata(c); */ + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ctrl->value = tvp5150_read(c, TVP5150_BRIGHT_CTL); + return 0; + case V4L2_CID_CONTRAST: + ctrl->value = tvp5150_read(c, TVP5150_CONTRAST_CTL); + return 0; + case V4L2_CID_SATURATION: + ctrl->value = tvp5150_read(c, TVP5150_SATURATION_CTL); + return 0; + case V4L2_CID_HUE: + ctrl->value = tvp5150_read(c, TVP5150_HUE_CTL); + return 0; + default: + return -EINVAL; + } +} + +static int tvp5150_set_ctrl(struct i2c_client *c, struct v4l2_control *ctrl) +{ +/* struct tvp5150 *decoder = i2c_get_clientdata(c); */ + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + tvp5150_write(c, TVP5150_BRIGHT_CTL, ctrl->value); + return 0; + case V4L2_CID_CONTRAST: + tvp5150_write(c, TVP5150_CONTRAST_CTL, ctrl->value); + return 0; + case V4L2_CID_SATURATION: + tvp5150_write(c, TVP5150_SATURATION_CTL, ctrl->value); + return 0; + case V4L2_CID_HUE: + tvp5150_write(c, TVP5150_HUE_CTL, ctrl->value); + return 0; + default: + return -EINVAL; + } +} + +/**************************************************************************** + I2C Command + ****************************************************************************/ +static int tvp5150_command(struct i2c_client *client, + unsigned int cmd, void *arg) +{ + struct tvp5150 *decoder = i2c_get_clientdata(client); + + switch (cmd) { + + case 0: + case DECODER_INIT: + tvp5150_reset(client); + break; + + case DECODER_DUMP: + dump_reg(client); + break; + + case DECODER_GET_CAPABILITIES: + { + struct video_decoder_capability *cap = arg; + + cap->flags = VIDEO_DECODER_PAL | + VIDEO_DECODER_NTSC | + VIDEO_DECODER_SECAM | + VIDEO_DECODER_AUTO | VIDEO_DECODER_CCIR; + cap->inputs = 3; + cap->outputs = 1; + break; + } + case DECODER_GET_STATUS: + { + break; + } + + case DECODER_SET_GPIO: + break; + + case DECODER_SET_VBI_BYPASS: + break; + + case DECODER_SET_NORM: + { + int *iarg = arg; + + switch (*iarg) { + + case VIDEO_MODE_NTSC: + break; + + case VIDEO_MODE_PAL: + break; + + case VIDEO_MODE_SECAM: + break; + + case VIDEO_MODE_AUTO: + break; + + default: + return -EINVAL; + + } + decoder->norm = *iarg; + break; + } + case DECODER_SET_INPUT: + { + int *iarg = arg; + if (*iarg < 0 || *iarg > 3) { + return -EINVAL; + } + + decoder->input = *iarg; + tvp5150_selmux(client, decoder->input); + + break; + } + case DECODER_SET_OUTPUT: + { + int *iarg = arg; + + /* not much choice of outputs */ + if (*iarg != 0) { + return -EINVAL; + } + break; + } + case DECODER_ENABLE_OUTPUT: + { + int *iarg = arg; + + decoder->enable = (*iarg != 0); + + tvp5150_selmux(client, decoder->input); + + break; + } + case VIDIOC_QUERYCTRL: + { + struct v4l2_queryctrl *qc = arg; + u8 i, n; + + dprintk(1, KERN_DEBUG "VIDIOC_QUERYCTRL"); + + n = sizeof(tvp5150_qctrl) / sizeof(tvp5150_qctrl[0]); + for (i = 0; i < n; i++) + if (qc->id && qc->id == tvp5150_qctrl[i].id) { + memcpy(qc, &(tvp5150_qctrl[i]), + sizeof(*qc)); + return 0; + } + + return -EINVAL; + } + case VIDIOC_G_CTRL: + { + struct v4l2_control *ctrl = arg; + dprintk(1, KERN_DEBUG "VIDIOC_G_CTRL"); + + return tvp5150_get_ctrl(client, ctrl); + } + case VIDIOC_S_CTRL_OLD: /* ??? */ + case VIDIOC_S_CTRL: + { + struct v4l2_control *ctrl = arg; + u8 i, n; + dprintk(1, KERN_DEBUG "VIDIOC_S_CTRL"); + n = sizeof(tvp5150_qctrl) / sizeof(tvp5150_qctrl[0]); + for (i = 0; i < n; i++) + if (ctrl->id == tvp5150_qctrl[i].id) { + if (ctrl->value < + tvp5150_qctrl[i].minimum + || ctrl->value > + tvp5150_qctrl[i].maximum) + return -ERANGE; + dprintk(1, + KERN_DEBUG + "VIDIOC_S_CTRL: id=%d, value=%d", + ctrl->id, ctrl->value); + return tvp5150_set_ctrl(client, ctrl); + } + return -EINVAL; + } + + case DECODER_SET_PICTURE: + { + struct video_picture *pic = arg; + if (decoder->bright != pic->brightness) { + /* We want 0 to 255 we get 0-65535 */ + decoder->bright = pic->brightness; + tvp5150_write(client, TVP5150_BRIGHT_CTL, + decoder->bright >> 8); + } + if (decoder->contrast != pic->contrast) { + /* We want 0 to 255 we get 0-65535 */ + decoder->contrast = pic->contrast; + tvp5150_write(client, TVP5150_CONTRAST_CTL, + decoder->contrast >> 8); + } + if (decoder->sat != pic->colour) { + /* We want 0 to 255 we get 0-65535 */ + decoder->sat = pic->colour; + tvp5150_write(client, TVP5150_SATURATION_CTL, + decoder->contrast >> 8); + } + if (decoder->hue != pic->hue) { + /* We want -128 to 127 we get 0-65535 */ + decoder->hue = pic->hue; + tvp5150_write(client, TVP5150_HUE_CTL, + (decoder->hue - 32768) >> 8); + } + break; + } + default: + return -EINVAL; + } + + return 0; +} + +/**************************************************************************** + I2C Client & Driver + ****************************************************************************/ +static struct i2c_driver driver; + +static struct i2c_client client_template = { + .name = "(unset)", + .flags = I2C_CLIENT_ALLOW_USE, + .driver = &driver, +}; + +static int tvp5150_detect_client(struct i2c_adapter *adapter, + int address, int kind) +{ + struct i2c_client *client; + struct tvp5150 *core; + int rv; + + dprintk(1, + KERN_INFO + "tvp5150.c: detecting tvp5150 client on address 0x%x\n", + address << 1); + + client_template.adapter = adapter; + client_template.addr = address; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality + (adapter, + I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return 0; + + client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (client == 0) + return -ENOMEM; + memcpy(client, &client_template, sizeof(struct i2c_client)); + + core = kmalloc(sizeof(struct tvp5150), GFP_KERNEL); + if (core == 0) { + kfree(client); + return -ENOMEM; + } + memset(core, 0, sizeof(struct tvp5150)); + i2c_set_clientdata(client, core); + + rv = i2c_attach_client(client); + + core->norm = VIDEO_MODE_AUTO; + core->input = 2; + core->enable = 1; + core->bright = 32768; + core->contrast = 32768; + core->hue = 32768; + core->sat = 32768; + + if (rv) { + kfree(client); + kfree(core); + return rv; + } + + if (debug > 1) + dump_reg(client); + + return 0; +} + +static int tvp5150_attach_adapter(struct i2c_adapter *adapter) +{ + dprintk(1, + KERN_INFO + "tvp5150.c: starting probe for adapter %s (0x%x)\n", + adapter->name, adapter->id); + return i2c_probe(adapter, &addr_data, &tvp5150_detect_client); +} + +static int tvp5150_detach_client(struct i2c_client *client) +{ + struct tvp5150 *decoder = i2c_get_clientdata(client); + int err; + + err = i2c_detach_client(client); + if (err) { + return err; + } + + kfree(decoder); + kfree(client); + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static struct i2c_driver driver = { + .owner = THIS_MODULE, + .name = "tvp5150", + + /* FIXME */ + .id = I2C_DRIVERID_SAA7110, + .flags = I2C_DF_NOTIFY, + + .attach_adapter = tvp5150_attach_adapter, + .detach_client = tvp5150_detach_client, + + .command = tvp5150_command, +}; + +static int __init tvp5150_init(void) +{ + return i2c_add_driver(&driver); +} + +static void __exit tvp5150_exit(void) +{ + i2c_del_driver(&driver); +} + +module_init(tvp5150_init); +module_exit(tvp5150_exit); diff --git a/drivers/media/video/tvp5150_reg.h b/drivers/media/video/tvp5150_reg.h new file mode 100644 index 000000000000..cd45c1ded786 --- /dev/null +++ b/drivers/media/video/tvp5150_reg.h @@ -0,0 +1,173 @@ +#define TVP5150_VD_IN_SRC_SEL_1 0x00 /* Video input source selection #1 */ +#define TVP5150_ANAL_CHL_CTL 0x01 /* Analog channel controls */ +#define TVP5150_OP_MODE_CTL 0x02 /* Operation mode controls */ +#define TVP5150_MISC_CTL 0x03 /* Miscellaneous controls */ +#define TVP5150_AUTOSW_MSK 0x04 /* Autoswitch mask: TVP5150A / TVP5150AM */ + +/* Reserved 05h */ + +#define TVP5150_COLOR_KIL_THSH_CTL 0x06 /* Color killer threshold control */ +#define TVP5150_LUMA_PROC_CTL_1 0x07 /* Luminance processing control #1 */ +#define TVP5150_LUMA_PROC_CTL_2 0x08 /* Luminance processing control #2 */ +#define TVP5150_BRIGHT_CTL 0x09 /* Brightness control */ +#define TVP5150_SATURATION_CTL 0x0a /* Color saturation control */ +#define TVP5150_HUE_CTL 0x0b /* Hue control */ +#define TVP5150_CONTRAST_CTL 0x0c /* Contrast control */ +#define TVP5150_DATA_RATE_SEL 0x0d /* Outputs and data rates select */ +#define TVP5150_LUMA_PROC_CTL_3 0x0e /* Luminance processing control #3 */ +#define TVP5150_CONF_SHARED_PIN 0x0f /* Configuration shared pins */ + +/* Reserved 10h */ + +#define TVP5150_ACT_VD_CROP_ST_MSB 0x11 /* Active video cropping start MSB */ +#define TVP5150_ACT_VD_CROP_ST_LSB 0x12 /* Active video cropping start LSB */ +#define TVP5150_ACT_VD_CROP_STP_MSB 0x13 /* Active video cropping stop MSB */ +#define TVP5150_ACT_VD_CROP_STP_LSB 0x14 /* Active video cropping stop LSB */ +#define TVP5150_GENLOCK 0x15 /* Genlock/RTC */ +#define TVP5150_HORIZ_SYNC_START 0x16 /* Horizontal sync start */ + +/* Reserved 17h */ + +#define TVP5150_VERT_BLANKING_START 0x18 /* Vertical blanking start */ +#define TVP5150_VERT_BLANKING_STOP 0x19 /* Vertical blanking stop */ +#define TVP5150_CHROMA_PROC_CTL_1 0x1a /* Chrominance processing control #1 */ +#define TVP5150_CHROMA_PROC_CTL_2 0x1b /* Chrominance processing control #2 */ +#define TVP5150_INT_RESET_REG_B 0x1c /* Interrupt reset register B */ +#define TVP5150_INT_ENABLE_REG_B 0x1d /* Interrupt enable register B */ +#define TVP5150_INTT_CONFIG_REG_B 0x1e /* Interrupt configuration register B */ + +/* Reserved 1Fh-27h */ + +#define TVP5150_VIDEO_STD 0x28 /* Video standard */ + +/* Reserved 29h-2bh */ + +#define TVP5150_CB_GAIN_FACT 0x2c /* Cb gain factor */ +#define TVP5150_CR_GAIN_FACTOR 0x2d /* Cr gain factor */ +#define TVP5150_MACROVISION_ON_CTR 0x2e /* Macrovision on counter */ +#define TVP5150_MACROVISION_OFF_CTR 0x2f /* Macrovision off counter */ +#define TVP5150_REV_SELECT 0x30 /* revision select (TVP5150AM1 only) */ + +/* Reserved 31h-7Fh */ + +#define TVP5150_MSB_DEV_ID 0x80 /* MSB of device ID */ +#define TVP5150_LSB_DEV_ID 0x81 /* LSB of device ID */ +#define TVP5150_ROM_MAJOR_VER 0x82 /* ROM major version */ +#define TVP5150_ROM_MINOR_VER 0x83 /* ROM minor version */ +#define TVP5150_VERT_LN_COUNT_MSB 0x84 /* Vertical line count MSB */ +#define TVP5150_VERT_LN_COUNT_LSB 0x85 /* Vertical line count LSB */ +#define TVP5150_INT_STATUS_REG_B 0x86 /* Interrupt status register B */ +#define TVP5150_INT_ACTIVE_REG_B 0x87 /* Interrupt active register B */ +#define TVP5150_STATUS_REG_1 0x88 /* Status register #1 */ +#define TVP5150_STATUS_REG_2 0x89 /* Status register #2 */ +#define TVP5150_STATUS_REG_3 0x8a /* Status register #3 */ +#define TVP5150_STATUS_REG_4 0x8b /* Status register #4 */ +#define TVP5150_STATUS_REG_5 0x8c /* Status register #5 */ +/* Reserved 8Dh-8Fh */ +#define TVP5150_CC_DATA_REG1 0x90 /* Closed caption data registers */ +#define TVP5150_CC_DATA_REG2 0x91 /* Closed caption data registers */ +#define TVP5150_CC_DATA_REG3 0x92 /* Closed caption data registers */ +#define TVP5150_CC_DATA_REG4 0x93 /* Closed caption data registers */ +#define TVP5150_WSS_DATA_REG1 0X94 /* WSS data registers */ +#define TVP5150_WSS_DATA_REG2 0X95 /* WSS data registers */ +#define TVP5150_WSS_DATA_REG3 0X96 /* WSS data registers */ +#define TVP5150_WSS_DATA_REG4 0X97 /* WSS data registers */ +#define TVP5150_WSS_DATA_REG5 0X98 /* WSS data registers */ +#define TVP5150_WSS_DATA_REG6 0X99 /* WSS data registers */ +#define TVP5150_VPS_DATA_REG1 0x9a /* VPS data registers */ +#define TVP5150_VPS_DATA_REG2 0x9b /* VPS data registers */ +#define TVP5150_VPS_DATA_REG3 0x9c /* VPS data registers */ +#define TVP5150_VPS_DATA_REG4 0x9d /* VPS data registers */ +#define TVP5150_VPS_DATA_REG5 0x9e /* VPS data registers */ +#define TVP5150_VPS_DATA_REG6 0x9f /* VPS data registers */ +#define TVP5150_VPS_DATA_REG7 0xa0 /* VPS data registers */ +#define TVP5150_VPS_DATA_REG8 0xa1 /* VPS data registers */ +#define TVP5150_VPS_DATA_REG9 0xa2 /* VPS data registers */ +#define TVP5150_VPS_DATA_REG10 0xa3 /* VPS data registers */ +#define TVP5150_VPS_DATA_REG11 0xa4 /* VPS data registers */ +#define TVP5150_VPS_DATA_REG12 0xa5 /* VPS data registers */ +#define TVP5150_VPS_DATA_REG13 0xa6 /* VPS data registers */ +#define TVP5150_VITC_DATA_REG1 0xa7 /* VITC data registers */ +#define TVP5150_VITC_DATA_REG2 0xa8 /* VITC data registers */ +#define TVP5150_VITC_DATA_REG3 0xa9 /* VITC data registers */ +#define TVP5150_VITC_DATA_REG4 0xaa /* VITC data registers */ +#define TVP5150_VITC_DATA_REG5 0xab /* VITC data registers */ +#define TVP5150_VITC_DATA_REG6 0xac /* VITC data registers */ +#define TVP5150_VITC_DATA_REG7 0xad /* VITC data registers */ +#define TVP5150_VITC_DATA_REG8 0xae /* VITC data registers */ +#define TVP5150_VITC_DATA_REG9 0xaf /* VITC data registers */ +#define TVP5150_VBI_FIFO_READ_DATA 0xb0 /* VBI FIFO read data */ +#define TVP5150_TELETEXT_FIL_1_1 0xb1 /* Teletext filter 1 */ +#define TVP5150_TELETEXT_FIL_1_2 0xb2 /* Teletext filter 1 */ +#define TVP5150_TELETEXT_FIL_1_3 0xb3 /* Teletext filter 1 */ +#define TVP5150_TELETEXT_FIL_1_4 0xb4 /* Teletext filter 1 */ +#define TVP5150_TELETEXT_FIL_1_5 0xb5 /* Teletext filter 1 */ +#define TVP5150_TELETEXT_FIL_2_1 0xb6 /* Teletext filter 2 */ +#define TVP5150_TELETEXT_FIL_2_2 0xb7 /* Teletext filter 2 */ +#define TVP5150_TELETEXT_FIL_2_3 0xb8 /* Teletext filter 2 */ +#define TVP5150_TELETEXT_FIL_2_4 0xb9 /* Teletext filter 2 */ +#define TVP5150_TELETEXT_FIL_2_5 0xba /* Teletext filter 2 */ +#define TVP5150_TELETEXT_FIL_ENA 0xbb /* Teletext filter enable */ +/* Reserved BCh-BFh */ +#define TVP5150_INT_STATUS_REG_A 0xc0 /* Interrupt status register A */ +#define TVP5150_INT_ENABLE_REG_A 0xc1 /* Interrupt enable register A */ +#define TVP5150_INT_CONF 0xc2 /* Interrupt configuration */ +#define TVP5150_VDP_CONF_RAM_DATA 0xc3 /* VDP configuration RAM data */ +#define TVP5150_CONF_RAM_ADDR_LOW 0xc4 /* Configuration RAM address low byte */ +#define TVP5150_CONF_RAM_ADDR_HIGH 0xc5 /* Configuration RAM address high byte */ +#define TVP5150_VDP_STATUS_REG 0xc6 /* VDP status register */ +#define TVP5150_FIFO_WORD_COUNT 0xc7 /* FIFO word count */ +#define TVP5150_FIFO_INT_THRESHOLD 0xc8 /* FIFO interrupt threshold */ +#define TVP5150_FIFO_RESET 0xc9 /* FIFO reset */ +#define TVP5150_LINE_NUMBER_INT 0xca /* Line number interrupt */ +#define TVP5150_PIX_ALIGN_REG_LOW 0xcb /* Pixel alignment register low byte */ +#define TVP5150_PIX_ALIGN_REG_HIGH 0xcc /* Pixel alignment register high byte */ +#define TVP5150_FIFO_OUT_CTRL 0xcd /* FIFO output control */ +/* Reserved CEh */ +#define TVP5150_FULL_FIELD_ENA_1 0xcf /* Full field enable 1 */ +#define TVP5150_FULL_FIELD_ENA_2 0xd0 /* Full field enable 2 */ +#define TVP5150_LINE_MODE_REG_1 0xd1 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_2 0xd2 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_3 0xd3 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_4 0xd4 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_5 0xd5 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_6 0xd6 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_7 0xd7 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_8 0xd8 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_9 0xd9 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_10 0xda /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_11 0xdb /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_12 0xdc /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_13 0xdd /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_14 0xde /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_15 0xdf /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_16 0xe0 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_17 0xe1 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_18 0xe2 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_19 0xe3 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_20 0xe4 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_21 0xe5 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_22 0xe6 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_23 0xe7 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_24 0xe8 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_25 0xe9 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_27 0xea /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_28 0xeb /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_29 0xec /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_30 0xed /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_31 0xee /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_32 0xef /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_33 0xf0 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_34 0xf1 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_35 0xf2 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_36 0xf3 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_37 0xf4 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_38 0xf5 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_39 0xf6 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_40 0xf7 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_41 0xf8 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_42 0xf9 /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_43 0xfa /* Line mode registers */ +#define TVP5150_LINE_MODE_REG_44 0xfb /* Line mode registers */ +#define TVP5150_FULL_FIELD_MODE_REG 0xfc /* Full field mode register */ +/* Reserved FDh-FFh */ diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c index d679ca23ded7..4134549d11a8 100644 --- a/drivers/media/video/v4l1-compat.c +++ b/drivers/media/video/v4l1-compat.c @@ -708,7 +708,7 @@ v4l_compat_translate_ioctl(struct inode *inode, } case VIDIOCGFREQ: /* get frequency */ { - int *freq = arg; + unsigned long *freq = arg; freq2.tuner = 0; err = drv(inode, file, VIDIOC_G_FREQUENCY, &freq2); @@ -720,7 +720,7 @@ v4l_compat_translate_ioctl(struct inode *inode, } case VIDIOCSFREQ: /* set frequency */ { - int *freq = arg; + unsigned long *freq = arg; freq2.tuner = 0; drv(inode, file, VIDIOC_G_FREQUENCY, &freq2); @@ -960,7 +960,7 @@ v4l_compat_translate_ioctl(struct inode *inode, fmt->start[1] = fmt2->fmt.vbi.start[1]; fmt->count[1] = fmt2->fmt.vbi.count[1]; fmt->flags = fmt2->fmt.vbi.flags & 0x03; - break; + break; } case VIDIOCSVBIFMT: { diff --git a/drivers/media/video/video-buf.c b/drivers/media/video/video-buf.c index 574b8e36f3c6..acfd3a103f35 100644 --- a/drivers/media/video/video-buf.c +++ b/drivers/media/video/video-buf.c @@ -147,7 +147,7 @@ int videobuf_dma_init_user(struct videobuf_dmabuf *dma, int direction, data,size,dma->nr_pages); down_read(¤t->mm->mmap_sem); - err = get_user_pages(current,current->mm, + err = get_user_pages(current,current->mm, data & PAGE_MASK, dma->nr_pages, rw == READ, 1, /* force */ dma->pages, NULL); @@ -750,9 +750,9 @@ videobuf_read_zerocopy(struct videobuf_queue *q, char __user *data, { enum v4l2_field field; unsigned long flags; - int retval; + int retval; - /* setup stuff */ + /* setup stuff */ retval = -ENOMEM; q->read_buf = videobuf_alloc(q->msize); if (NULL == q->read_buf) @@ -760,18 +760,18 @@ videobuf_read_zerocopy(struct videobuf_queue *q, char __user *data, q->read_buf->memory = V4L2_MEMORY_USERPTR; q->read_buf->baddr = (unsigned long)data; - q->read_buf->bsize = count; + q->read_buf->bsize = count; field = videobuf_next_field(q); retval = q->ops->buf_prepare(q,q->read_buf,field); if (0 != retval) goto done; - /* start capture & wait */ + /* start capture & wait */ spin_lock_irqsave(q->irqlock,flags); q->ops->buf_queue(q,q->read_buf); spin_unlock_irqrestore(q->irqlock,flags); - retval = videobuf_waiton(q->read_buf,0,0); - if (0 == retval) { + retval = videobuf_waiton(q->read_buf,0,0); + if (0 == retval) { videobuf_dma_pci_sync(q->pci,&q->read_buf->dma); if (STATE_ERROR == q->read_buf->state) retval = -EIO; @@ -828,7 +828,7 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, } /* wait until capture is done */ - retval = videobuf_waiton(q->read_buf, nonblocking, 1); + retval = videobuf_waiton(q->read_buf, nonblocking, 1); if (0 != retval) goto done; videobuf_dma_pci_sync(q->pci,&q->read_buf->dma); @@ -1096,7 +1096,7 @@ videobuf_vm_nopage(struct vm_area_struct *vma, unsigned long vaddr, dprintk(3,"nopage: fault @ %08lx [vma %08lx-%08lx]\n", vaddr,vma->vm_start,vma->vm_end); - if (vaddr > vma->vm_end) + if (vaddr > vma->vm_end) return NOPAGE_SIGBUS; page = alloc_page(GFP_USER); if (!page) diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c new file mode 100644 index 000000000000..22f286222004 --- /dev/null +++ b/drivers/media/video/wm8775.c @@ -0,0 +1,254 @@ +/* + * wm8775 - driver version 0.0.1 + * + * Copyright (C) 2004 Ulf Eklund <ivtv at eklund.to> + * + * Based on saa7115 driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/ioctl.h> +#include <asm/uaccess.h> +#include <linux/i2c.h> +#include <linux/i2c-id.h> +#include <linux/videodev.h> +#include <media/audiochip.h> + +MODULE_DESCRIPTION("wm8775 driver"); +MODULE_AUTHOR("Ulf Eklund"); +MODULE_LICENSE("GPL"); + +#define wm8775_err(fmt, arg...) do { \ + printk(KERN_ERR "%s %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0) +#define wm8775_info(fmt, arg...) do { \ + printk(KERN_INFO "%s %d-%04x: " fmt, client->driver->name, \ + i2c_adapter_id(client->adapter), client->addr , ## arg); } while (0) + + +static unsigned short normal_i2c[] = { 0x36 >> 1, I2C_CLIENT_END }; + + +I2C_CLIENT_INSMOD; + +/* ----------------------------------------------------------------------- */ + +enum { + R7 = 7, R11 = 11, + R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R23 = 23, + TOT_REGS +}; + +struct wm8775_state { + u8 input; /* Last selected input (0-0xf) */ + u8 muted; +}; + +static int wm8775_write(struct i2c_client *client, int reg, u16 val) +{ + int i; + + if (reg < 0 || reg >= TOT_REGS) { + wm8775_err("Invalid register R%d\n", reg); + return -1; + } + + for (i = 0; i < 3; i++) { + if (i2c_smbus_write_byte_data(client, (reg << 1) | + (val >> 8), val & 0xff) == 0) { + return 0; + } + } + wm8775_err("I2C: cannot write %03x to register R%d\n", val, reg); + return -1; +} + +static int wm8775_command(struct i2c_client *client, unsigned int cmd, + void *arg) +{ + struct wm8775_state *state = i2c_get_clientdata(client); + int *input = arg; + + switch (cmd) { + case AUDC_SET_INPUT: + wm8775_write(client, R21, 0x0c0); + wm8775_write(client, R14, 0x1d4); + wm8775_write(client, R15, 0x1d4); + + if (*input == AUDIO_RADIO) { + wm8775_write(client, R21, 0x108); + state->input = 8; + state->muted = 0; + break; + } + if (*input == AUDIO_MUTE) { + state->muted = 1; + break; + } + if (*input == AUDIO_UNMUTE) { + wm8775_write(client, R21, 0x100 + state->input); + state->muted = 0; + break; + } + /* All other inputs... */ + wm8775_write(client, R21, 0x102); + state->input = 2; + state->muted = 0; + break; + + case VIDIOC_LOG_STATUS: + wm8775_info("Input: %s%s\n", + state->input == 8 ? "radio" : "default", + state->muted ? " (muted)" : ""); + break; + + case VIDIOC_S_FREQUENCY: + /* If I remove this, then it can happen that I have no + sound the first time I tune from static to a valid channel. + It's difficult to reproduce and is almost certainly related + to the zero cross detect circuit. */ + wm8775_write(client, R21, 0x0c0); + wm8775_write(client, R14, 0x1d4); + wm8775_write(client, R15, 0x1d4); + wm8775_write(client, R21, 0x100 + state->input); + break; + + default: + return -EINVAL; + } + return 0; +} + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ + +/* + * Generic i2c probe + * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' + */ + +static struct i2c_driver i2c_driver; + +static int wm8775_attach(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *client; + struct wm8775_state *state; + + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return 0; + + client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (client == 0) + return -ENOMEM; + + memset(client, 0, sizeof(struct i2c_client)); + client->addr = address; + client->adapter = adapter; + client->driver = &i2c_driver; + client->flags = I2C_CLIENT_ALLOW_USE; + snprintf(client->name, sizeof(client->name) - 1, "wm8775"); + + wm8775_info("chip found @ 0x%x (%s)\n", address << 1, adapter->name); + + state = kmalloc(sizeof(struct wm8775_state), GFP_KERNEL); + if (state == NULL) { + kfree(client); + return -ENOMEM; + } + state->input = 2; + state->muted = 0; + i2c_set_clientdata(client, state); + + /* initialize wm8775 */ + wm8775_write(client, R23, 0x000); /* RESET */ + wm8775_write(client, R7, 0x000); /* Disable zero cross detect timeout */ + wm8775_write(client, R11, 0x021); /* Left justified, 24-bit mode */ + wm8775_write(client, R12, 0x102); /* Master mode, clock ratio 256fs */ + wm8775_write(client, R13, 0x000); /* Powered up */ + wm8775_write(client, R14, 0x1d4); /* ADC gain +2.5dB, enable zero cross */ + wm8775_write(client, R15, 0x1d4); /* ADC gain +2.5dB, enable zero cross */ + wm8775_write(client, R16, 0x1bf); /* ALC Stereo, ALC target level -1dB FS */ + /* max gain +8dB */ + wm8775_write(client, R17, 0x185); /* Enable gain control, use zero cross */ + /* detection, ALC hold time 42.6 ms */ + wm8775_write(client, R18, 0x0a2); /* ALC gain ramp up delay 34 s, */ + /* ALC gain ramp down delay 33 ms */ + wm8775_write(client, R19, 0x005); /* Enable noise gate, threshold -72dBfs */ + wm8775_write(client, R20, 0x07a); /* Transient window 4ms, lower PGA gain */ + /* limit -1dB */ + wm8775_write(client, R21, 0x102); /* LRBOTH = 1, use input 2. */ + i2c_attach_client(client); + + return 0; +} + +static int wm8775_probe(struct i2c_adapter *adapter) +{ +#ifdef I2C_CLASS_TV_ANALOG + if (adapter->class & I2C_CLASS_TV_ANALOG) +#else + if (adapter->id == I2C_HW_B_BT848) +#endif + return i2c_probe(adapter, &addr_data, wm8775_attach); + return 0; +} + +static int wm8775_detach(struct i2c_client *client) +{ + int err; + + err = i2c_detach_client(client); + if (err) { + return err; + } + kfree(client); + + return 0; +} + +/* ----------------------------------------------------------------------- */ + +/* i2c implementation */ +static struct i2c_driver i2c_driver = { + .name = "wm8775", + + .id = I2C_DRIVERID_WM8775, + .flags = I2C_DF_NOTIFY, + + .attach_adapter = wm8775_probe, + .detach_client = wm8775_detach, + .command = wm8775_command, + .owner = THIS_MODULE, +}; + + +static int __init wm8775_init_module(void) +{ + return i2c_add_driver(&i2c_driver); +} + +static void __exit wm8775_cleanup_module(void) +{ + i2c_del_driver(&i2c_driver); +} + +module_init(wm8775_init_module); +module_exit(wm8775_cleanup_module); diff --git a/drivers/media/video/zr36016.c b/drivers/media/video/zr36016.c index d4740a89cea1..4ed898585c70 100644 --- a/drivers/media/video/zr36016.c +++ b/drivers/media/video/zr36016.c @@ -26,7 +26,6 @@ #define ZR016_VERSION "v0.7" -#include <linux/version.h> #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> diff --git a/drivers/media/video/zr36050.c b/drivers/media/video/zr36050.c index 13b1e7b6fd6e..0144576a6123 100644 --- a/drivers/media/video/zr36050.c +++ b/drivers/media/video/zr36050.c @@ -26,7 +26,6 @@ #define ZR050_VERSION "v0.7.1" -#include <linux/version.h> #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c index b50dc403e6db..129744a07abd 100644 --- a/drivers/media/video/zr36060.c +++ b/drivers/media/video/zr36060.c @@ -26,7 +26,6 @@ #define ZR060_VERSION "v0.7" -#include <linux/version.h> #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> |