diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/core/mmc.c | 23 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-msm.c | 42 | ||||
| -rw-r--r-- | drivers/mmc/host/sunxi-mmc.c | 5 |
3 files changed, 64 insertions, 6 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index e7ea45386c22..efa95dc4fc4e 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1384,13 +1384,17 @@ static int mmc_select_hs400es(struct mmc_card *card) goto out_err; } + /* + * Bump to HS timing and frequency. Some cards don't handle + * SEND_STATUS reliably at the initial frequency. + */ mmc_set_timing(host, MMC_TIMING_MMC_HS); + mmc_set_bus_speed(card); + err = mmc_switch_status(card, true); if (err) goto out_err; - mmc_set_clock(host, card->ext_csd.hs_max_dtr); - /* Switch card to DDR with strobe bit */ val = EXT_CSD_DDR_BUS_WIDTH_8 | EXT_CSD_BUS_WIDTH_STROBE; err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, @@ -1448,7 +1452,7 @@ out_err: static int mmc_select_hs200(struct mmc_card *card) { struct mmc_host *host = card->host; - unsigned int old_timing, old_signal_voltage; + unsigned int old_timing, old_signal_voltage, old_clock; int err = -EINVAL; u8 val; @@ -1479,8 +1483,17 @@ static int mmc_select_hs200(struct mmc_card *card) false, true, MMC_CMD_RETRIES); if (err) goto err; + + /* + * Bump to HS timing and frequency. Some cards don't handle + * SEND_STATUS reliably at the initial frequency. + * NB: We can't move to full (HS200) speeds until after we've + * successfully switched over. + */ old_timing = host->ios.timing; + old_clock = host->ios.clock; mmc_set_timing(host, MMC_TIMING_MMC_HS200); + mmc_set_clock(card->host, card->ext_csd.hs_max_dtr); /* * For HS200, CRC errors are not a reliable way to know the @@ -1493,8 +1506,10 @@ static int mmc_select_hs200(struct mmc_card *card) * mmc_select_timing() assumes timing has not changed if * it is a switch error. */ - if (err == -EBADMSG) + if (err == -EBADMSG) { + mmc_set_clock(host, old_clock); mmc_set_timing(host, old_timing); + } } err: if (err) { diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 50c71e0ba5e4..ff9f5b63c337 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -17,6 +17,7 @@ #include <linux/regulator/consumer.h> #include <linux/interconnect.h> #include <linux/pinctrl/consumer.h> +#include <linux/reset.h> #include "sdhci-pltfm.h" #include "cqhci.h" @@ -2482,6 +2483,43 @@ static inline void sdhci_msm_get_of_property(struct platform_device *pdev, of_property_read_u32(node, "qcom,dll-config", &msm_host->dll_config); } +static int sdhci_msm_gcc_reset(struct device *dev, struct sdhci_host *host) +{ + struct reset_control *reset; + int ret = 0; + + reset = reset_control_get_optional_exclusive(dev, NULL); + if (IS_ERR(reset)) + return dev_err_probe(dev, PTR_ERR(reset), + "unable to acquire core_reset\n"); + + if (!reset) + return ret; + + ret = reset_control_assert(reset); + if (ret) { + reset_control_put(reset); + return dev_err_probe(dev, ret, "core_reset assert failed\n"); + } + + /* + * The hardware requirement for delay between assert/deassert + * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to + * ~125us (4/32768). To be on the safe side add 200us delay. + */ + usleep_range(200, 210); + + ret = reset_control_deassert(reset); + if (ret) { + reset_control_put(reset); + return dev_err_probe(dev, ret, "core_reset deassert failed\n"); + } + + usleep_range(200, 210); + reset_control_put(reset); + + return ret; +} static int sdhci_msm_probe(struct platform_device *pdev) { @@ -2529,6 +2567,10 @@ static int sdhci_msm_probe(struct platform_device *pdev) msm_host->saved_tuning_phase = INVALID_TUNING_PHASE; + ret = sdhci_msm_gcc_reset(&pdev->dev, host); + if (ret) + goto pltfm_free; + /* Setup SDCC bus voter clock. */ msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus"); if (!IS_ERR(msm_host->bus_clk)) { diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index c62afd212692..46f9e2923d86 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -377,8 +377,9 @@ static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host, pdes[i].buf_addr_ptr1 = cpu_to_le32(sg_dma_address(&data->sg[i]) >> host->cfg->idma_des_shift); - pdes[i].buf_addr_ptr2 = cpu_to_le32((u32)next_desc >> - host->cfg->idma_des_shift); + pdes[i].buf_addr_ptr2 = + cpu_to_le32(next_desc >> + host->cfg->idma_des_shift); } pdes[0].config |= cpu_to_le32(SDXC_IDMAC_DES0_FD); |