summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/atmel_nand.c9
-rw-r--r--drivers/mtd/nand/nand_base.c10
-rw-r--r--drivers/mtd/nand/omap2.c129
-rw-r--r--drivers/mtd/nand/sh_flctl.c4
4 files changed, 125 insertions, 27 deletions
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 914455783302..92623ac2015a 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -41,6 +41,7 @@
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/platform_data/atmel.h>
+#include <linux/pinctrl/consumer.h>
#include <mach/cpu.h>
@@ -1370,6 +1371,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
struct resource *mem;
struct mtd_part_parser_data ppdata = {};
int res;
+ struct pinctrl *pinctrl;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
@@ -1414,6 +1416,13 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
nand_chip->IO_ADDR_W = host->io_base;
nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl)) {
+ dev_err(host->dev, "Failed to request pinctrl\n");
+ res = PTR_ERR(pinctrl);
+ goto err_ecc_ioremap;
+ }
+
if (gpio_is_valid(host->board.rdy_pin)) {
res = gpio_request(host->board.rdy_pin, "nand_rdy");
if (res < 0) {
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ec6841d8e956..1a03b7f673ce 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2983,13 +2983,15 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
/*
* Field definitions are in the following datasheets:
* Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
- * New style (6 byte ID): Samsung K9GAG08U0F (p.44)
+ * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44)
* Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22)
*
- * Check for ID length, cell type, and Hynix/Samsung ID to decide what
- * to do.
+ * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung
+ * ID to decide what to do.
*/
- if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG) {
+ if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG &&
+ (chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ id_data[5] != 0x00) {
/* Calc pagesize */
mtd->writesize = 2048 << (extid & 0x03);
extid >>= 2;
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 5b3138620646..5c8978e90240 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -27,8 +27,7 @@
#include <linux/bch.h>
#endif
-#include <plat/dma.h>
-#include <plat/gpmc.h>
+#include <plat-omap/dma-omap.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#define DRIVER_NAME "omap2-nand"
@@ -106,10 +105,18 @@
#define CS_MASK 0x7
#define ENABLE_PREFETCH (0x1 << 7)
#define DMA_MPU_MODE_SHIFT 2
+#define ECCSIZE0_SHIFT 12
#define ECCSIZE1_SHIFT 22
#define ECC1RESULTSIZE 0x1
#define ECCCLEAR 0x100
#define ECC1 0x1
+#define PREFETCH_FIFOTHRESHOLD_MAX 0x40
+#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8)
+#define PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
+#define PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
+#define STATUS_BUFF_EMPTY 0x00000001
+
+#define OMAP24XX_DMA_GPMC 4
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
@@ -269,7 +276,7 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
/* wait until buffer is available for write */
do {
status = readl(info->reg.gpmc_status) &
- GPMC_STATUS_BUFF_EMPTY;
+ STATUS_BUFF_EMPTY;
} while (!status);
}
}
@@ -307,7 +314,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
/* wait until buffer is available for write */
do {
status = readl(info->reg.gpmc_status) &
- GPMC_STATUS_BUFF_EMPTY;
+ STATUS_BUFF_EMPTY;
} while (!status);
}
}
@@ -348,7 +355,7 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
} else {
do {
r_count = readl(info->reg.gpmc_prefetch_status);
- r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count);
+ r_count = PREFETCH_STATUS_FIFO_CNT(r_count);
r_count = r_count >> 2;
ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
p += r_count;
@@ -395,7 +402,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
} else {
while (len) {
w_count = readl(info->reg.gpmc_prefetch_status);
- w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count);
+ w_count = PREFETCH_STATUS_FIFO_CNT(w_count);
w_count = w_count >> 1;
for (i = 0; (i < w_count) && len; i++, len -= 2)
iowrite16(*p++, info->nand.IO_ADDR_W);
@@ -407,7 +414,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
do {
cpu_relax();
val = readl(info->reg.gpmc_prefetch_status);
- val = GPMC_PREFETCH_STATUS_COUNT(val);
+ val = PREFETCH_STATUS_COUNT(val);
} while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
@@ -493,7 +500,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
do {
cpu_relax();
val = readl(info->reg.gpmc_prefetch_status);
- val = GPMC_PREFETCH_STATUS_COUNT(val);
+ val = PREFETCH_STATUS_COUNT(val);
} while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
@@ -556,7 +563,7 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
u32 bytes;
bytes = readl(info->reg.gpmc_prefetch_status);
- bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes);
+ bytes = PREFETCH_STATUS_FIFO_CNT(bytes);
bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */
if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
if (this_irq == info->gpmc_irq_count)
@@ -682,7 +689,7 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd,
limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
do {
val = readl(info->reg.gpmc_prefetch_status);
- val = GPMC_PREFETCH_STATUS_COUNT(val);
+ val = PREFETCH_STATUS_COUNT(val);
cpu_relax();
} while (val && (tim++ < limit));
@@ -996,7 +1003,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
cond_resched();
}
- status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
+ status = readb(info->reg.gpmc_nand_data);
return status;
}
@@ -1029,19 +1036,45 @@ static int omap_dev_ready(struct mtd_info *mtd)
static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
{
int nerrors;
- unsigned int dev_width;
+ unsigned int dev_width, nsectors;
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
struct nand_chip *chip = mtd->priv;
+ u32 val;
nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4;
dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+ nsectors = 1;
/*
* Program GPMC to perform correction on one 512-byte sector at a time.
* Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and
* gives a slight (5%) performance gain (but requires additional code).
*/
- (void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors);
+
+ writel(ECC1, info->reg.gpmc_ecc_control);
+
+ /*
+ * When using BCH, sector size is hardcoded to 512 bytes.
+ * Here we are using wrapping mode 6 both for reading and writing, with:
+ * size0 = 0 (no additional protected byte in spare area)
+ * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+ */
+ val = (32 << ECCSIZE1_SHIFT) | (0 << ECCSIZE0_SHIFT);
+ writel(val, info->reg.gpmc_ecc_size_config);
+
+ /* BCH configuration */
+ val = ((1 << 16) | /* enable BCH */
+ (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+ (0x06 << 8) | /* wrap mode = 6 */
+ (dev_width << 7) | /* bus width */
+ (((nsectors-1) & 0x7) << 4) | /* number of sectors */
+ (info->gpmc_cs << 1) | /* ECC CS */
+ (0x1)); /* enable ECC */
+
+ writel(val, info->reg.gpmc_ecc_config);
+
+ /* clear ecc and enable bits */
+ writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
}
/**
@@ -1055,7 +1088,32 @@ static int omap3_calculate_ecc_bch4(struct mtd_info *mtd, const u_char *dat,
{
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- return gpmc_calculate_ecc_bch4(info->gpmc_cs, dat, ecc_code);
+ unsigned long nsectors, val1, val2;
+ int i;
+
+ nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+ for (i = 0; i < nsectors; i++) {
+
+ /* Read hw-computed remainder */
+ val1 = readl(info->reg.gpmc_bch_result0[i]);
+ val2 = readl(info->reg.gpmc_bch_result1[i]);
+
+ /*
+ * Add constant polynomial to remainder, in order to get an ecc
+ * sequence of 0xFFs for a buffer filled with 0xFFs; and
+ * left-justify the resulting polynomial.
+ */
+ *ecc_code++ = 0x28 ^ ((val2 >> 12) & 0xFF);
+ *ecc_code++ = 0x13 ^ ((val2 >> 4) & 0xFF);
+ *ecc_code++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
+ *ecc_code++ = 0x39 ^ ((val1 >> 20) & 0xFF);
+ *ecc_code++ = 0x96 ^ ((val1 >> 12) & 0xFF);
+ *ecc_code++ = 0xac ^ ((val1 >> 4) & 0xFF);
+ *ecc_code++ = 0x7f ^ ((val1 & 0xF) << 4);
+ }
+
+ return 0;
}
/**
@@ -1069,7 +1127,39 @@ static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat,
{
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- return gpmc_calculate_ecc_bch8(info->gpmc_cs, dat, ecc_code);
+ unsigned long nsectors, val1, val2, val3, val4;
+ int i;
+
+ nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+ for (i = 0; i < nsectors; i++) {
+
+ /* Read hw-computed remainder */
+ val1 = readl(info->reg.gpmc_bch_result0[i]);
+ val2 = readl(info->reg.gpmc_bch_result1[i]);
+ val3 = readl(info->reg.gpmc_bch_result2[i]);
+ val4 = readl(info->reg.gpmc_bch_result3[i]);
+
+ /*
+ * Add constant polynomial to remainder, in order to get an ecc
+ * sequence of 0xFFs for a buffer filled with 0xFFs.
+ */
+ *ecc_code++ = 0xef ^ (val4 & 0xFF);
+ *ecc_code++ = 0x51 ^ ((val3 >> 24) & 0xFF);
+ *ecc_code++ = 0x2e ^ ((val3 >> 16) & 0xFF);
+ *ecc_code++ = 0x09 ^ ((val3 >> 8) & 0xFF);
+ *ecc_code++ = 0xed ^ (val3 & 0xFF);
+ *ecc_code++ = 0x93 ^ ((val2 >> 24) & 0xFF);
+ *ecc_code++ = 0x9a ^ ((val2 >> 16) & 0xFF);
+ *ecc_code++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
+ *ecc_code++ = 0x97 ^ (val2 & 0xFF);
+ *ecc_code++ = 0x79 ^ ((val1 >> 24) & 0xFF);
+ *ecc_code++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
+ *ecc_code++ = 0x24 ^ ((val1 >> 8) & 0xFF);
+ *ecc_code++ = 0xb5 ^ (val1 & 0xFF);
+ }
+
+ return 0;
}
/**
@@ -1125,7 +1215,7 @@ static void omap3_free_bch(struct mtd_info *mtd)
*/
static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
{
- int ret, max_errors;
+ int max_errors;
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
#ifdef CONFIG_MTD_NAND_OMAP_BCH8
@@ -1142,11 +1232,6 @@ static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
goto fail;
}
- /* initialize GPMC BCH engine */
- ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors);
- if (ret)
- goto fail;
-
/* software bch library is only used to detect and locate errors */
info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */);
if (!info->bch)
@@ -1513,7 +1598,7 @@ static int omap_nand_remove(struct platform_device *pdev)
/* Release NAND device, its internal structures and partitions */
nand_release(&info->mtd);
iounmap(info->nand.IO_ADDR_R);
- release_mem_region(info->phys_base, NAND_IO_SIZE);
+ release_mem_region(info->phys_base, info->mem_size);
kfree(info);
return 0;
}
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 4fbfe96e37a1..f48ac5d80bbf 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -727,7 +727,9 @@ static void flctl_select_chip(struct mtd_info *mtd, int chipnr)
if (!flctl->qos_request) {
ret = dev_pm_qos_add_request(&flctl->pdev->dev,
- &flctl->pm_qos, 100);
+ &flctl->pm_qos,
+ DEV_PM_QOS_LATENCY,
+ 100);
if (ret < 0)
dev_err(&flctl->pdev->dev,
"PM QoS request failed: %d\n", ret);
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-03-11 16:56:22 +0000