1 files changed, 1 insertions, 122 deletions

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index ae1560250c48..5b56d718692b 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -413,50 +413,6 @@ int spi_nor_read_sr(struct spi_nor *nor, u8 *sr)
 }
 
 /**
- * spi_nor_read_fsr() - Read the Flag Status Register.
- * @nor:	pointer to 'struct spi_nor'
- * @fsr:	pointer to a DMA-able buffer where the value of the
- *              Flag Status Register will be written. Should be at least 2
- *              bytes.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_fsr(struct spi_nor *nor, u8 *fsr)
-{
-	int ret;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 0),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_DATA_IN(1, fsr, 0));
-
-		if (nor->reg_proto == SNOR_PROTO_8_8_8_DTR) {
-			op.addr.nbytes = nor->params->rdsr_addr_nbytes;
-			op.dummy.nbytes = nor->params->rdsr_dummy;
-			/*
-			 * We don't want to read only one byte in DTR mode. So,
-			 * read 2 and then discard the second byte.
-			 */
-			op.data.nbytes = 2;
-		}
-
-		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = spi_nor_controller_ops_read_reg(nor, SPINOR_OP_RDFSR, fsr,
-						      1);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d reading FSR\n", ret);
-
-	return ret;
-}
-
-/**
  * spi_nor_read_cr() - Read the Configuration Register using the
  * SPINOR_OP_RDCR (35h) command.
  * @nor:	pointer to 'struct spi_nor'
@@ -665,75 +621,6 @@ int spi_nor_sr_ready(struct spi_nor *nor)
 }
 
 /**
- * spi_nor_clear_fsr() - Clear the Flag Status Register.
- * @nor:	pointer to 'struct spi_nor'.
- */
-static void spi_nor_clear_fsr(struct spi_nor *nor)
-{
-	int ret;
-
-	if (nor->spimem) {
-		struct spi_mem_op op =
-			SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 0),
-				   SPI_MEM_OP_NO_ADDR,
-				   SPI_MEM_OP_NO_DUMMY,
-				   SPI_MEM_OP_NO_DATA);
-
-		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
-
-		ret = spi_mem_exec_op(nor->spimem, &op);
-	} else {
-		ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_CLFSR,
-						       NULL, 0);
-	}
-
-	if (ret)
-		dev_dbg(nor->dev, "error %d clearing FSR\n", ret);
-}
-
-/**
- * spi_nor_fsr_ready() - Query the Flag Status Register to see if the flash is
- * ready for new commands.
- * @nor:	pointer to 'struct spi_nor'.
- *
- * Return: 1 if ready, 0 if not ready, -errno on errors.
- */
-static int spi_nor_fsr_ready(struct spi_nor *nor)
-{
-	int ret = spi_nor_read_fsr(nor, nor->bouncebuf);
-
-	if (ret)
-		return ret;
-
-	if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) {
-		if (nor->bouncebuf[0] & FSR_E_ERR)
-			dev_err(nor->dev, "Erase operation failed.\n");
-		else
-			dev_err(nor->dev, "Program operation failed.\n");
-
-		if (nor->bouncebuf[0] & FSR_PT_ERR)
-			dev_err(nor->dev,
-			"Attempted to modify a protected sector.\n");
-
-		spi_nor_clear_fsr(nor);
-
-		/*
-		 * WEL bit remains set to one when an erase or page program
-		 * error occurs. Issue a Write Disable command to protect
-		 * against inadvertent writes that can possibly corrupt the
-		 * contents of the memory.
-		 */
-		ret = spi_nor_write_disable(nor);
-		if (ret)
-			return ret;
-
-		return -EIO;
-	}
-
-	return !!(nor->bouncebuf[0] & FSR_READY);
-}
-
-/**
  * spi_nor_ready() - Query the flash to see if it is ready for new commands.
  * @nor:	pointer to 'struct spi_nor'.
  *
@@ -741,19 +628,11 @@ static int spi_nor_fsr_ready(struct spi_nor *nor)
  */
 static int spi_nor_ready(struct spi_nor *nor)
 {
-	int sr, fsr;
-
 	/* Flashes might override the standard routine. */
 	if (nor->params->ready)
 		return nor->params->ready(nor);
 
-	sr = spi_nor_sr_ready(nor);
-	if (sr < 0)
-		return sr;
-	fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
-	if (fsr < 0)
-		return fsr;
-	return sr && fsr;
+	return spi_nor_sr_ready(nor);
 }
 
 /**