diff options
Diffstat (limited to 'drivers/net/dsa/mt7530.h')
| -rw-r--r-- | drivers/net/dsa/mt7530.h | 259 |
1 files changed, 258 insertions, 1 deletions
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 14de60d0b9ca..9278a8e3d04e 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -11,9 +11,10 @@ #define MT7530_NUM_FDB_RECORDS 2048 #define MT7530_ALL_MEMBERS 0xff -enum { +enum mt753x_id { ID_MT7530 = 0, ID_MT7621 = 1, + ID_MT7531 = 2, }; #define NUM_TRGMII_CTRL 5 @@ -41,6 +42,33 @@ enum { #define MIRROR_PORT(x) ((x) & 0x7) #define MIRROR_MASK 0x7 +/* Registers for CPU forward control */ +#define MT7531_CFC 0x4 +#define MT7531_MIRROR_EN BIT(19) +#define MT7531_MIRROR_MASK (MIRROR_MASK << 16) +#define MT7531_MIRROR_PORT_GET(x) (((x) >> 16) & MIRROR_MASK) +#define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16) +#define MT7531_CPU_PMAP_MASK GENMASK(7, 0) + +#define MT753X_MIRROR_REG(id) (((id) == ID_MT7531) ? \ + MT7531_CFC : MT7530_MFC) +#define MT753X_MIRROR_EN(id) (((id) == ID_MT7531) ? \ + MT7531_MIRROR_EN : MIRROR_EN) +#define MT753X_MIRROR_MASK(id) (((id) == ID_MT7531) ? \ + MT7531_MIRROR_MASK : MIRROR_MASK) + +/* Registers for BPDU and PAE frame control*/ +#define MT753X_BPC 0x24 +#define MT753X_BPDU_PORT_FW_MASK GENMASK(2, 0) + +enum mt753x_bpdu_port_fw { + MT753X_BPDU_FOLLOW_MFC, + MT753X_BPDU_CPU_EXCLUDE = 4, + MT753X_BPDU_CPU_INCLUDE = 5, + MT753X_BPDU_CPU_ONLY = 6, + MT753X_BPDU_DROP = 7, +}; + /* Registers for address table access */ #define MT7530_ATA1 0x74 #define STATIC_EMP 0 @@ -220,10 +248,30 @@ enum mt7530_vlan_port_attr { #define PMCR_FORCE_LNK BIT(0) #define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \ PMCR_FORCE_SPEED_1000) +#define MT7531_FORCE_LNK BIT(31) +#define MT7531_FORCE_SPD BIT(30) +#define MT7531_FORCE_DPX BIT(29) +#define MT7531_FORCE_RX_FC BIT(28) +#define MT7531_FORCE_TX_FC BIT(27) +#define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \ + MT7531_FORCE_SPD | \ + MT7531_FORCE_DPX | \ + MT7531_FORCE_RX_FC | \ + MT7531_FORCE_TX_FC) +#define PMCR_FORCE_MODE_ID(id) (((id) == ID_MT7531) ? \ + MT7531_FORCE_MODE : \ + PMCR_FORCE_MODE) #define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \ PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \ PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ PMCR_FORCE_FDX | PMCR_FORCE_LNK) +#define PMCR_CPU_PORT_SETTING(id) (PMCR_FORCE_MODE_ID((id)) | \ + PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \ + PMCR_BACKOFF_EN | PMCR_BACKPR_EN | \ + PMCR_TX_EN | PMCR_RX_EN | \ + PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ + PMCR_FORCE_SPEED_1000 | \ + PMCR_FORCE_FDX | PMCR_FORCE_LNK) #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100) #define PMSR_EEE1G BIT(7) @@ -237,6 +285,10 @@ enum mt7530_vlan_port_attr { #define PMSR_DPX BIT(1) #define PMSR_LINK BIT(0) +/* Register for port debug count */ +#define MT7531_DBG_CNT(x) (0x3018 + (x) * 0x100) +#define MT7531_DIS_CLR BIT(31) + /* Register for MIB */ #define MT7530_PORT_MIB_COUNTER(x) (0x4000 + (x) * 0x100) #define MT7530_MIB_CCR 0x4fe0 @@ -254,12 +306,118 @@ enum mt7530_vlan_port_attr { CCR_RX_OCT_CNT_BAD | \ CCR_TX_OCT_CNT_GOOD | \ CCR_TX_OCT_CNT_BAD) + +/* MT7531 SGMII register group */ +#define MT7531_SGMII_REG_BASE 0x5000 +#define MT7531_SGMII_REG(p, r) (MT7531_SGMII_REG_BASE + \ + ((p) - 5) * 0x1000 + (r)) + +/* Register forSGMII PCS_CONTROL_1 */ +#define MT7531_PCS_CONTROL_1(p) MT7531_SGMII_REG(p, 0x00) +#define MT7531_SGMII_LINK_STATUS BIT(18) +#define MT7531_SGMII_AN_ENABLE BIT(12) +#define MT7531_SGMII_AN_RESTART BIT(9) + +/* Register for SGMII PCS_SPPED_ABILITY */ +#define MT7531_PCS_SPEED_ABILITY(p) MT7531_SGMII_REG(p, 0x08) +#define MT7531_SGMII_TX_CONFIG_MASK GENMASK(15, 0) +#define MT7531_SGMII_TX_CONFIG BIT(0) + +/* Register for SGMII_MODE */ +#define MT7531_SGMII_MODE(p) MT7531_SGMII_REG(p, 0x20) +#define MT7531_SGMII_REMOTE_FAULT_DIS BIT(8) +#define MT7531_SGMII_IF_MODE_MASK GENMASK(5, 1) +#define MT7531_SGMII_FORCE_DUPLEX BIT(4) +#define MT7531_SGMII_FORCE_SPEED_MASK GENMASK(3, 2) +#define MT7531_SGMII_FORCE_SPEED_1000 BIT(3) +#define MT7531_SGMII_FORCE_SPEED_100 BIT(2) +#define MT7531_SGMII_FORCE_SPEED_10 0 +#define MT7531_SGMII_SPEED_DUPLEX_AN BIT(1) + +enum mt7531_sgmii_force_duplex { + MT7531_SGMII_FORCE_FULL_DUPLEX = 0, + MT7531_SGMII_FORCE_HALF_DUPLEX = 0x10, +}; + +/* Fields of QPHY_PWR_STATE_CTRL */ +#define MT7531_QPHY_PWR_STATE_CTRL(p) MT7531_SGMII_REG(p, 0xe8) +#define MT7531_SGMII_PHYA_PWD BIT(4) + +/* Values of SGMII SPEED */ +#define MT7531_PHYA_CTRL_SIGNAL3(p) MT7531_SGMII_REG(p, 0x128) +#define MT7531_RG_TPHY_SPEED_MASK (BIT(2) | BIT(3)) +#define MT7531_RG_TPHY_SPEED_1_25G 0x0 +#define MT7531_RG_TPHY_SPEED_3_125G BIT(2) + /* Register for system reset */ #define MT7530_SYS_CTRL 0x7000 #define SYS_CTRL_PHY_RST BIT(2) #define SYS_CTRL_SW_RST BIT(1) #define SYS_CTRL_REG_RST BIT(0) +/* Register for PHY Indirect Access Control */ +#define MT7531_PHY_IAC 0x701C +#define MT7531_PHY_ACS_ST BIT(31) +#define MT7531_MDIO_REG_ADDR_MASK (0x1f << 25) +#define MT7531_MDIO_PHY_ADDR_MASK (0x1f << 20) +#define MT7531_MDIO_CMD_MASK (0x3 << 18) +#define MT7531_MDIO_ST_MASK (0x3 << 16) +#define MT7531_MDIO_RW_DATA_MASK (0xffff) +#define MT7531_MDIO_REG_ADDR(x) (((x) & 0x1f) << 25) +#define MT7531_MDIO_DEV_ADDR(x) (((x) & 0x1f) << 25) +#define MT7531_MDIO_PHY_ADDR(x) (((x) & 0x1f) << 20) +#define MT7531_MDIO_CMD(x) (((x) & 0x3) << 18) +#define MT7531_MDIO_ST(x) (((x) & 0x3) << 16) + +enum mt7531_phy_iac_cmd { + MT7531_MDIO_ADDR = 0, + MT7531_MDIO_WRITE = 1, + MT7531_MDIO_READ = 2, + MT7531_MDIO_READ_CL45 = 3, +}; + +/* MDIO_ST: MDIO start field */ +enum mt7531_mdio_st { + MT7531_MDIO_ST_CL45 = 0, + MT7531_MDIO_ST_CL22 = 1, +}; + +#define MT7531_MDIO_CL22_READ (MT7531_MDIO_ST(MT7531_MDIO_ST_CL22) | \ + MT7531_MDIO_CMD(MT7531_MDIO_READ)) +#define MT7531_MDIO_CL22_WRITE (MT7531_MDIO_ST(MT7531_MDIO_ST_CL22) | \ + MT7531_MDIO_CMD(MT7531_MDIO_WRITE)) +#define MT7531_MDIO_CL45_ADDR (MT7531_MDIO_ST(MT7531_MDIO_ST_CL45) | \ + MT7531_MDIO_CMD(MT7531_MDIO_ADDR)) +#define MT7531_MDIO_CL45_READ (MT7531_MDIO_ST(MT7531_MDIO_ST_CL45) | \ + MT7531_MDIO_CMD(MT7531_MDIO_READ)) +#define MT7531_MDIO_CL45_WRITE (MT7531_MDIO_ST(MT7531_MDIO_ST_CL45) | \ + MT7531_MDIO_CMD(MT7531_MDIO_WRITE)) + +/* Register for RGMII clock phase */ +#define MT7531_CLKGEN_CTRL 0x7500 +#define CLK_SKEW_OUT(x) (((x) & 0x3) << 8) +#define CLK_SKEW_OUT_MASK GENMASK(9, 8) +#define CLK_SKEW_IN(x) (((x) & 0x3) << 6) +#define CLK_SKEW_IN_MASK GENMASK(7, 6) +#define RXCLK_NO_DELAY BIT(5) +#define TXCLK_NO_REVERSE BIT(4) +#define GP_MODE(x) (((x) & 0x3) << 1) +#define GP_MODE_MASK GENMASK(2, 1) +#define GP_CLK_EN BIT(0) + +enum mt7531_gp_mode { + MT7531_GP_MODE_RGMII = 0, + MT7531_GP_MODE_MII = 1, + MT7531_GP_MODE_REV_MII = 2 +}; + +enum mt7531_clk_skew { + MT7531_CLK_SKEW_NO_CHG = 0, + MT7531_CLK_SKEW_DLY_100PPS = 1, + MT7531_CLK_SKEW_DLY_200PPS = 2, + MT7531_CLK_SKEW_REVERSE = 3, +}; + /* Register for hw trap status */ #define MT7530_HWTRAP 0x7800 #define HWTRAP_XTAL_MASK (BIT(10) | BIT(9)) @@ -267,6 +425,16 @@ enum mt7530_vlan_port_attr { #define HWTRAP_XTAL_40MHZ (BIT(10)) #define HWTRAP_XTAL_20MHZ (BIT(9)) +#define MT7531_HWTRAP 0x7800 +#define HWTRAP_XTAL_FSEL_MASK BIT(7) +#define HWTRAP_XTAL_FSEL_25MHZ BIT(7) +#define HWTRAP_XTAL_FSEL_40MHZ 0 +/* Unique fields of (M)HWSTRAP for MT7531 */ +#define XTAL_FSEL_S 7 +#define XTAL_FSEL_M BIT(7) +#define PHY_EN BIT(6) +#define CHG_STRAP BIT(8) + /* Register for hw trap modification */ #define MT7530_MHWTRAP 0x7804 #define MHWTRAP_PHY0_SEL BIT(20) @@ -281,14 +449,37 @@ enum mt7530_vlan_port_attr { #define MT7530_TOP_SIG_CTRL 0x7808 #define TOP_SIG_CTRL_NORMAL (BIT(17) | BIT(16)) +#define MT7531_TOP_SIG_SR 0x780c +#define PAD_DUAL_SGMII_EN BIT(1) +#define PAD_MCM_SMI_EN BIT(0) + #define MT7530_IO_DRV_CR 0x7810 #define P5_IO_CLK_DRV(x) ((x) & 0x3) #define P5_IO_DATA_DRV(x) (((x) & 0x3) << 4) +#define MT7531_CHIP_REV 0x781C + +#define MT7531_PLLGP_EN 0x7820 +#define EN_COREPLL BIT(2) +#define SW_CLKSW BIT(1) +#define SW_PLLGP BIT(0) + #define MT7530_P6ECR 0x7830 #define P6_INTF_MODE_MASK 0x3 #define P6_INTF_MODE(x) ((x) & 0x3) +#define MT7531_PLLGP_CR0 0x78a8 +#define RG_COREPLL_EN BIT(22) +#define RG_COREPLL_POSDIV_S 23 +#define RG_COREPLL_POSDIV_M 0x3800000 +#define RG_COREPLL_SDM_PCW_S 1 +#define RG_COREPLL_SDM_PCW_M 0x3ffffe +#define RG_COREPLL_SDM_PCW_CHG BIT(0) + +/* Registers for RGMII and SGMII PLL clock */ +#define MT7531_ANA_PLLGP_CR2 0x78b0 +#define MT7531_ANA_PLLGP_CR5 0x78bc + /* Registers for TRGMII on the both side */ #define MT7530_TRGMII_RCK_CTRL 0x7a00 #define RX_RST BIT(31) @@ -327,10 +518,25 @@ enum mt7530_vlan_port_attr { #define MT7530_P5RGMIITXCR 0x7b04 #define CSR_RGMII_TXC_CFG(x) ((x) & 0x1f) +/* Registers for GPIO mode */ +#define MT7531_GPIO_MODE0 0x7c0c +#define MT7531_GPIO0_MASK GENMASK(3, 0) +#define MT7531_GPIO0_INTERRUPT 1 + +#define MT7531_GPIO_MODE1 0x7c10 +#define MT7531_GPIO11_RG_RXD2_MASK GENMASK(15, 12) +#define MT7531_EXT_P_MDC_11 (2 << 12) +#define MT7531_GPIO12_RG_RXD3_MASK GENMASK(19, 16) +#define MT7531_EXT_P_MDIO_12 (2 << 16) + #define MT7530_CREV 0x7ffc #define CHIP_NAME_SHIFT 16 #define MT7530_ID 0x7530 +#define MT7531_CREV 0x781C +#define CHIP_REV_M 0x0f +#define MT7531_ID 0x7531 + /* Registers for core PLL access through mmd indirect */ #define CORE_PLL_GROUP2 0x401 #define RG_SYSPLL_EN_NORMAL BIT(15) @@ -347,6 +553,10 @@ enum mt7530_vlan_port_attr { #define RG_SYSPLL_DDSFBK_EN BIT(12) #define RG_SYSPLL_BIAS_EN BIT(11) #define RG_SYSPLL_BIAS_LPF_EN BIT(10) +#define MT7531_PHY_PLL_OFF BIT(5) +#define MT7531_PHY_PLL_BYPASS_MODE BIT(4) + +#define MT753X_CTRL_PHY_ADDR 0 #define CORE_PLL_GROUP5 0x404 #define RG_LCDDS_PCW_NCPO1(x) ((x) & 0xffff) @@ -425,6 +635,7 @@ enum p5_interface_select { P5_INTF_SEL_PHY_P0, P5_INTF_SEL_PHY_P4, P5_INTF_SEL_GMAC5, + P5_INTF_SEL_GMAC5_SGMII, }; static const char *p5_intf_modes(unsigned int p5_interface) @@ -438,11 +649,56 @@ static const char *p5_intf_modes(unsigned int p5_interface) return "PHY P4"; case P5_INTF_SEL_GMAC5: return "GMAC5"; + case P5_INTF_SEL_GMAC5_SGMII: + return "GMAC5_SGMII"; default: return "unknown"; } } +/* struct mt753x_info - This is the main data structure for holding the specific + * part for each supported device + * @sw_setup: Holding the handler to a device initialization + * @phy_read: Holding the way reading PHY port + * @phy_write: Holding the way writing PHY port + * @pad_setup: Holding the way setting up the bus pad for a certain + * MAC port + * @phy_mode_supported: Check if the PHY type is being supported on a certain + * port + * @mac_port_validate: Holding the way to set addition validate type for a + * certan MAC port + * @mac_port_get_state: Holding the way getting the MAC/PCS state for a certain + * MAC port + * @mac_port_config: Holding the way setting up the PHY attribute to a + * certain MAC port + * @mac_pcs_an_restart Holding the way restarting PCS autonegotiation for a + * certain MAC port + * @mac_pcs_link_up: Holding the way setting up the PHY attribute to the pcs + * of the certain MAC port + */ +struct mt753x_info { + enum mt753x_id id; + + int (*sw_setup)(struct dsa_switch *ds); + int (*phy_read)(struct dsa_switch *ds, int port, int regnum); + int (*phy_write)(struct dsa_switch *ds, int port, int regnum, u16 val); + int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface); + int (*cpu_port_config)(struct dsa_switch *ds, int port); + bool (*phy_mode_supported)(struct dsa_switch *ds, int port, + const struct phylink_link_state *state); + void (*mac_port_validate)(struct dsa_switch *ds, int port, + unsigned long *supported); + int (*mac_port_get_state)(struct dsa_switch *ds, int port, + struct phylink_link_state *state); + int (*mac_port_config)(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface); + void (*mac_pcs_an_restart)(struct dsa_switch *ds, int port); + void (*mac_pcs_link_up)(struct dsa_switch *ds, int port, + unsigned int mode, phy_interface_t interface, + int speed, int duplex); +}; + /* struct mt7530_priv - This is the main data structure for holding the state * of the driver * @dev: The device pointer @@ -468,6 +724,7 @@ struct mt7530_priv { struct regulator *core_pwr; struct regulator *io_pwr; struct gpio_desc *reset; + const struct mt753x_info *info; unsigned int id; bool mcm; phy_interface_t p6_interface; |