diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c')
-rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 42 |
1 files changed, 32 insertions, 10 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index eafad410e59a..6bd1832e3f3e 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1090,8 +1090,14 @@ static void e1000_print_hw_hang(struct work_struct *work) adapter->tx_hang_recheck = true; return; } - /* Real hang detected */ adapter->tx_hang_recheck = false; + + if (er32(TDH(0)) == er32(TDT(0))) { + e_dbg("false hang detected, ignoring\n"); + return; + } + + /* Real hang detected */ netif_stop_queue(netdev); e1e_rphy(hw, MII_BMSR, &phy_status); @@ -1121,6 +1127,8 @@ static void e1000_print_hw_hang(struct work_struct *work) eop, jiffies, eop_desc->upper.fields.status, er32(STATUS), phy_status, phy_1000t_status, phy_ext_status, pci_status); + e1000e_dump(adapter); + /* Suggest workaround for known h/w issue */ if ((hw->mac.type == e1000_pchlan) && (er32(CTRL) & E1000_CTRL_TFCE)) e_err("Try turning off Tx pause (flow control) via ethtool\n"); @@ -2890,7 +2898,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; struct e1000_ring *tx_ring = adapter->tx_ring; u64 tdba; - u32 tdlen, tarc; + u32 tdlen, tctl, tarc; /* Setup the HW Tx Head and Tail descriptor pointers */ tdba = tx_ring->dma; @@ -2927,6 +2935,12 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) /* erratum work around: set txdctl the same for both queues */ ew32(TXDCTL(1), er32(TXDCTL(0))); + /* Program the Transmit Control Register */ + tctl = er32(TCTL); + tctl &= ~E1000_TCTL_CT; + tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | + (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); + if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) { tarc = er32(TARC(0)); /* set the speed mode bit, we'll clear it if we're not at @@ -2957,6 +2971,8 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) /* enable Report Status bit */ adapter->txd_cmd |= E1000_TXD_CMD_RS; + ew32(TCTL, tctl); + hw->mac.ops.config_collision_dist(hw); } @@ -4798,6 +4814,7 @@ static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter) if (adapter->phy_hang_count > 1) { adapter->phy_hang_count = 0; + e_dbg("PHY appears hung - resetting\n"); schedule_work(&adapter->reset_task); } } @@ -4956,15 +4973,11 @@ static void e1000_watchdog_task(struct work_struct *work) mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ)); - /* The link is lost so the controller stops DMA. - * If there is queued Tx work that cannot be done - * or if on an 8000ES2LAN which requires a Rx packet - * buffer work-around on link down event, reset the - * controller to flush the Tx/Rx packet buffers. - * (Do the reset outside of interrupt context). + /* 8000ES2LAN requires a Rx packet buffer work-around + * on link down event; reset the controller to flush + * the Rx packet buffer. */ - if ((adapter->flags & FLAG_RX_NEEDS_RESTART) || - (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) + if (adapter->flags & FLAG_RX_NEEDS_RESTART) adapter->flags |= FLAG_RESTART_NOW; else pm_schedule_suspend(netdev->dev.parent, @@ -4987,6 +5000,15 @@ link_up: adapter->gotc_old = adapter->stats.gotc; spin_unlock(&adapter->stats64_lock); + /* If the link is lost the controller stops DMA, but + * if there is queued Tx work it cannot be done. So + * reset the controller to flush the Tx packet buffers. + */ + if (!netif_carrier_ok(netdev) && + (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) + adapter->flags |= FLAG_RESTART_NOW; + + /* If reset is necessary, do it outside of interrupt context. */ if (adapter->flags & FLAG_RESTART_NOW) { schedule_work(&adapter->reset_task); /* return immediately since reset is imminent */ |