diff options
Diffstat (limited to 'drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c')
-rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 141 |
1 files changed, 133 insertions, 8 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 02c11a7f7d29..4e7634c83685 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -29,6 +29,24 @@ /***********************misc routines*****************************/ /** + * i40e_vc_disable_vf + * @pf: pointer to the pf info + * @vf: pointer to the vf info + * + * Disable the VF through a SW reset + **/ +static inline void i40e_vc_disable_vf(struct i40e_pf *pf, struct i40e_vf *vf) +{ + struct i40e_hw *hw = &pf->hw; + u32 reg; + + reg = rd32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id)); + reg |= I40E_VPGEN_VFRTRIG_VFSWR_MASK; + wr32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id), reg); + i40e_flush(hw); +} + +/** * i40e_vc_isvalid_vsi_id * @vf: pointer to the vf info * @vsi_id: vf relative vsi id @@ -336,6 +354,7 @@ static int i40e_config_vsi_rx_queue(struct i40e_vf *vf, u16 vsi_idx, rx_ctx.tphhead_ena = 1; rx_ctx.lrxqthresh = 2; rx_ctx.crcstrip = 1; + rx_ctx.prefena = 1; /* clear the context in the HMC */ ret = i40e_clear_lan_rx_queue_context(hw, pf_queue_id); @@ -416,6 +435,15 @@ static int i40e_alloc_vsi_res(struct i40e_vf *vf, enum i40e_vsi_type type) if (ret) dev_err(&pf->pdev->dev, "Unable to program ucast filters\n"); + /* Set VF bandwidth if specified */ + if (vf->tx_rate) { + ret = i40e_aq_config_vsi_bw_limit(&pf->hw, vsi->seid, + vf->tx_rate / 50, 0, NULL); + if (ret) + dev_err(&pf->pdev->dev, "Unable to set tx rate, VF %d, error code %d.\n", + vf->vf_id, ret); + } + error_alloc_vsi_res: return ret; } @@ -815,6 +843,10 @@ void i40e_free_vfs(struct i40e_pf *pf) kfree(pf->vf); pf->vf = NULL; + /* This check is for when the driver is unloaded while VFs are + * assigned. Setting the number of VFs to 0 through sysfs is caught + * before this function ever gets called. + */ if (!i40e_vfs_are_assigned(pf)) { pci_disable_sriov(pf->pdev); /* Acknowledge VFLR for all VFS. Without this, VFs will fail to @@ -951,7 +983,12 @@ int i40e_pci_sriov_configure(struct pci_dev *pdev, int num_vfs) if (num_vfs) return i40e_pci_sriov_enable(pdev, num_vfs); - i40e_free_vfs(pf); + if (!i40e_vfs_are_assigned(pf)) { + i40e_free_vfs(pf); + } else { + dev_warn(&pdev->dev, "Unable to free VFs because some are assigned to VMs.\n"); + return -EINVAL; + } return 0; } @@ -2022,10 +2059,11 @@ int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac) } /* delete the temporary mac address */ - i40e_del_filter(vsi, vf->default_lan_addr.addr, 0, true, false); + i40e_del_filter(vsi, vf->default_lan_addr.addr, vf->port_vlan_id, + true, false); /* add the new mac address */ - f = i40e_add_filter(vsi, mac, 0, true, false); + f = i40e_add_filter(vsi, mac, vf->port_vlan_id, true, false); if (!f) { dev_err(&pf->pdev->dev, "Unable to add VF ucast filter\n"); @@ -2088,18 +2126,28 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, goto error_pvid; } - if (vsi->info.pvid == 0 && i40e_is_vsi_in_vlan(vsi)) + if (vsi->info.pvid == 0 && i40e_is_vsi_in_vlan(vsi)) { dev_err(&pf->pdev->dev, "VF %d has already configured VLAN filters and the administrator is requesting a port VLAN override.\nPlease unload and reload the VF driver for this change to take effect.\n", vf_id); + /* Administrator Error - knock the VF offline until he does + * the right thing by reconfiguring his network correctly + * and then reloading the VF driver. + */ + i40e_vc_disable_vf(pf, vf); + } /* Check for condition where there was already a port VLAN ID * filter set and now it is being deleted by setting it to zero. + * Additionally check for the condition where there was a port + * VLAN but now there is a new and different port VLAN being set. * Before deleting all the old VLAN filters we must add new ones * with -1 (I40E_VLAN_ANY) or otherwise we're left with all our * MAC addresses deleted. */ - if (!(vlan_id || qos) && vsi->info.pvid) + if ((!(vlan_id || qos) || + (vlan_id | qos) != le16_to_cpu(vsi->info.pvid)) && + vsi->info.pvid) ret = i40e_vsi_add_vlan(vsi, I40E_VLAN_ANY); if (vsi->info.pvid) { @@ -2150,6 +2198,8 @@ error_pvid: return ret; } +#define I40E_BW_CREDIT_DIVISOR 50 /* 50Mbps per BW credit */ +#define I40E_MAX_BW_INACTIVE_ACCUM 4 /* device can accumulate 4 credits max */ /** * i40e_ndo_set_vf_bw * @netdev: network interface device structure @@ -2158,9 +2208,76 @@ error_pvid: * * configure vf tx rate **/ -int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int tx_rate) +int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int min_tx_rate, + int max_tx_rate) { - return -EOPNOTSUPP; + struct i40e_netdev_priv *np = netdev_priv(netdev); + struct i40e_pf *pf = np->vsi->back; + struct i40e_vsi *vsi; + struct i40e_vf *vf; + int speed = 0; + int ret = 0; + + /* validate the request */ + if (vf_id >= pf->num_alloc_vfs) { + dev_err(&pf->pdev->dev, "Invalid VF Identifier %d.\n", vf_id); + ret = -EINVAL; + goto error; + } + + if (min_tx_rate) { + dev_err(&pf->pdev->dev, "Invalid min tx rate (%d) (greater than 0) specified for vf %d.\n", + min_tx_rate, vf_id); + return -EINVAL; + } + + vf = &(pf->vf[vf_id]); + vsi = pf->vsi[vf->lan_vsi_index]; + if (!test_bit(I40E_VF_STAT_INIT, &vf->vf_states)) { + dev_err(&pf->pdev->dev, "Uninitialized VF %d.\n", vf_id); + ret = -EINVAL; + goto error; + } + + switch (pf->hw.phy.link_info.link_speed) { + case I40E_LINK_SPEED_40GB: + speed = 40000; + break; + case I40E_LINK_SPEED_10GB: + speed = 10000; + break; + case I40E_LINK_SPEED_1GB: + speed = 1000; + break; + default: + break; + } + + if (max_tx_rate > speed) { + dev_err(&pf->pdev->dev, "Invalid max tx rate %d specified for vf %d.", + max_tx_rate, vf->vf_id); + ret = -EINVAL; + goto error; + } + + if ((max_tx_rate < 50) && (max_tx_rate > 0)) { + dev_warn(&pf->pdev->dev, "Setting max Tx rate to minimum usable value of 50Mbps.\n"); + max_tx_rate = 50; + } + + /* Tx rate credits are in values of 50Mbps, 0 is disabled*/ + ret = i40e_aq_config_vsi_bw_limit(&pf->hw, vsi->seid, + max_tx_rate / I40E_BW_CREDIT_DIVISOR, + I40E_MAX_BW_INACTIVE_ACCUM, NULL); + if (ret) { + dev_err(&pf->pdev->dev, "Unable to set max tx rate, error code %d.\n", + ret); + ret = -EIO; + goto error; + } + vf->tx_rate = max_tx_rate; +error: + return ret; } /** @@ -2200,10 +2317,18 @@ int i40e_ndo_get_vf_config(struct net_device *netdev, memcpy(&ivi->mac, vf->default_lan_addr.addr, ETH_ALEN); - ivi->tx_rate = 0; + ivi->max_tx_rate = vf->tx_rate; + ivi->min_tx_rate = 0; ivi->vlan = le16_to_cpu(vsi->info.pvid) & I40E_VLAN_MASK; ivi->qos = (le16_to_cpu(vsi->info.pvid) & I40E_PRIORITY_MASK) >> I40E_VLAN_PRIORITY_SHIFT; + if (vf->link_forced == false) + ivi->linkstate = IFLA_VF_LINK_STATE_AUTO; + else if (vf->link_up == true) + ivi->linkstate = IFLA_VF_LINK_STATE_ENABLE; + else + ivi->linkstate = IFLA_VF_LINK_STATE_DISABLE; + ret = 0; error_param: |