diff options
Diffstat (limited to 'drivers/pci/pci.c')
| -rw-r--r-- | drivers/pci/pci.c | 201 |
1 files changed, 162 insertions, 39 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index ae550d71b815..9ab9b1008d8b 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -851,6 +851,66 @@ struct resource *pci_find_resource(struct pci_dev *dev, struct resource *res) EXPORT_SYMBOL(pci_find_resource); /** + * pci_resource_name - Return the name of the PCI resource + * @dev: PCI device to query + * @i: index of the resource + * + * Return the standard PCI resource (BAR) name according to their index. + */ +const char *pci_resource_name(struct pci_dev *dev, unsigned int i) +{ + static const char * const bar_name[] = { + "BAR 0", + "BAR 1", + "BAR 2", + "BAR 3", + "BAR 4", + "BAR 5", + "ROM", +#ifdef CONFIG_PCI_IOV + "VF BAR 0", + "VF BAR 1", + "VF BAR 2", + "VF BAR 3", + "VF BAR 4", + "VF BAR 5", +#endif + "bridge window", /* "io" included in %pR */ + "bridge window", /* "mem" included in %pR */ + "bridge window", /* "mem pref" included in %pR */ + }; + static const char * const cardbus_name[] = { + "BAR 1", + "unknown", + "unknown", + "unknown", + "unknown", + "unknown", +#ifdef CONFIG_PCI_IOV + "unknown", + "unknown", + "unknown", + "unknown", + "unknown", + "unknown", +#endif + "CardBus bridge window 0", /* I/O */ + "CardBus bridge window 1", /* I/O */ + "CardBus bridge window 0", /* mem */ + "CardBus bridge window 1", /* mem */ + }; + + if (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS && + i < ARRAY_SIZE(cardbus_name)) + return cardbus_name[i]; + + if (i < ARRAY_SIZE(bar_name)) + return bar_name[i]; + + return "unknown"; +} + +/** * pci_wait_for_pending - wait for @mask bit(s) to clear in status word @pos * @dev: the PCI device to operate on * @pos: config space offset of status word @@ -1294,6 +1354,7 @@ end: /** * pci_set_full_power_state - Put a PCI device into D0 and update its state * @dev: PCI device to power up + * @locked: whether pci_bus_sem is held * * Call pci_power_up() to put @dev into D0, read from its PCI_PM_CTRL register * to confirm the state change, restore its BARs if they might be lost and @@ -1303,7 +1364,7 @@ end: * to D0, it is more efficient to use pci_power_up() directly instead of this * function. */ -static int pci_set_full_power_state(struct pci_dev *dev) +static int pci_set_full_power_state(struct pci_dev *dev, bool locked) { u16 pmcsr; int ret; @@ -1339,7 +1400,7 @@ static int pci_set_full_power_state(struct pci_dev *dev) } if (dev->bus->self) - pcie_aspm_pm_state_change(dev->bus->self); + pcie_aspm_pm_state_change(dev->bus->self, locked); return 0; } @@ -1368,10 +1429,22 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state) pci_walk_bus(bus, __pci_dev_set_current_state, &state); } +static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state, bool locked) +{ + if (!bus) + return; + + if (locked) + pci_walk_bus_locked(bus, __pci_dev_set_current_state, &state); + else + pci_walk_bus(bus, __pci_dev_set_current_state, &state); +} + /** * pci_set_low_power_state - Put a PCI device into a low-power state. * @dev: PCI device to handle. * @state: PCI power state (D1, D2, D3hot) to put the device into. + * @locked: whether pci_bus_sem is held * * Use the device's PCI_PM_CTRL register to put it into a low-power state. * @@ -1382,7 +1455,7 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state) * 0 if device already is in the requested state. * 0 if device's power state has been successfully changed. */ -static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state) +static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state, bool locked) { u16 pmcsr; @@ -1436,29 +1509,12 @@ static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state) pci_power_name(state)); if (dev->bus->self) - pcie_aspm_pm_state_change(dev->bus->self); + pcie_aspm_pm_state_change(dev->bus->self, locked); return 0; } -/** - * pci_set_power_state - Set the power state of a PCI device - * @dev: PCI device to handle. - * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. - * - * Transition a device to a new power state, using the platform firmware and/or - * the device's PCI PM registers. - * - * RETURN VALUE: - * -EINVAL if the requested state is invalid. - * -EIO if device does not support PCI PM or its PM capabilities register has a - * wrong version, or device doesn't support the requested state. - * 0 if the transition is to D1 or D2 but D1 and D2 are not supported. - * 0 if device already is in the requested state. - * 0 if the transition is to D3 but D3 is not supported. - * 0 if device's power state has been successfully changed. - */ -int pci_set_power_state(struct pci_dev *dev, pci_power_t state) +static int __pci_set_power_state(struct pci_dev *dev, pci_power_t state, bool locked) { int error; @@ -1482,7 +1538,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; if (state == PCI_D0) - return pci_set_full_power_state(dev); + return pci_set_full_power_state(dev, locked); /* * This device is quirked not to be put into D3, so don't put it in @@ -1496,16 +1552,16 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) * To put the device in D3cold, put it into D3hot in the native * way, then put it into D3cold using platform ops. */ - error = pci_set_low_power_state(dev, PCI_D3hot); + error = pci_set_low_power_state(dev, PCI_D3hot, locked); if (pci_platform_power_transition(dev, PCI_D3cold)) return error; /* Powering off a bridge may power off the whole hierarchy */ if (dev->current_state == PCI_D3cold) - pci_bus_set_current_state(dev->subordinate, PCI_D3cold); + __pci_bus_set_current_state(dev->subordinate, PCI_D3cold, locked); } else { - error = pci_set_low_power_state(dev, state); + error = pci_set_low_power_state(dev, state, locked); if (pci_platform_power_transition(dev, state)) return error; @@ -1513,8 +1569,38 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; } + +/** + * pci_set_power_state - Set the power state of a PCI device + * @dev: PCI device to handle. + * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. + * + * Transition a device to a new power state, using the platform firmware and/or + * the device's PCI PM registers. + * + * RETURN VALUE: + * -EINVAL if the requested state is invalid. + * -EIO if device does not support PCI PM or its PM capabilities register has a + * wrong version, or device doesn't support the requested state. + * 0 if the transition is to D1 or D2 but D1 and D2 are not supported. + * 0 if device already is in the requested state. + * 0 if the transition is to D3 but D3 is not supported. + * 0 if device's power state has been successfully changed. + */ +int pci_set_power_state(struct pci_dev *dev, pci_power_t state) +{ + return __pci_set_power_state(dev, state, false); +} EXPORT_SYMBOL(pci_set_power_state); +int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state) +{ + lockdep_assert_held(&pci_bus_sem); + + return __pci_set_power_state(dev, state, true); +} +EXPORT_SYMBOL(pci_set_power_state_locked); + #define PCI_EXP_SAVE_REGS 7 static struct pci_cap_saved_state *_pci_find_saved_cap(struct pci_dev *pci_dev, @@ -3299,6 +3385,7 @@ static struct resource *pci_ea_get_resource(struct pci_dev *dev, u8 bei, static int pci_ea_read(struct pci_dev *dev, int offset) { struct resource *res; + const char *res_name; int ent_size, ent_offset = offset; resource_size_t start, end; unsigned long flags; @@ -3328,6 +3415,7 @@ static int pci_ea_read(struct pci_dev *dev, int offset) goto out; res = pci_ea_get_resource(dev, bei, prop); + res_name = pci_resource_name(dev, bei); if (!res) { pci_err(dev, "Unsupported EA entry BEI: %u\n", bei); goto out; @@ -3401,16 +3489,16 @@ static int pci_ea_read(struct pci_dev *dev, int offset) res->flags = flags; if (bei <= PCI_EA_BEI_BAR5) - pci_info(dev, "BAR %d: %pR (from Enhanced Allocation, properties %#02x)\n", - bei, res, prop); + pci_info(dev, "%s %pR: from Enhanced Allocation, properties %#02x\n", + res_name, res, prop); else if (bei == PCI_EA_BEI_ROM) - pci_info(dev, "ROM: %pR (from Enhanced Allocation, properties %#02x)\n", - res, prop); + pci_info(dev, "%s %pR: from Enhanced Allocation, properties %#02x\n", + res_name, res, prop); else if (bei >= PCI_EA_BEI_VF_BAR0 && bei <= PCI_EA_BEI_VF_BAR5) - pci_info(dev, "VF BAR %d: %pR (from Enhanced Allocation, properties %#02x)\n", - bei - PCI_EA_BEI_VF_BAR0, res, prop); + pci_info(dev, "%s %pR: from Enhanced Allocation, properties %#02x\n", + res_name, res, prop); else - pci_info(dev, "BEI %d res: %pR (from Enhanced Allocation, properties %#02x)\n", + pci_info(dev, "BEI %d %pR: from Enhanced Allocation, properties %#02x\n", bei, res, prop); out: @@ -6233,6 +6321,41 @@ int pcie_set_mps(struct pci_dev *dev, int mps) } EXPORT_SYMBOL(pcie_set_mps); +static enum pci_bus_speed to_pcie_link_speed(u16 lnksta) +{ + return pcie_link_speed[FIELD_GET(PCI_EXP_LNKSTA_CLS, lnksta)]; +} + +int pcie_link_speed_mbps(struct pci_dev *pdev) +{ + u16 lnksta; + int err; + + err = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnksta); + if (err) + return err; + + switch (to_pcie_link_speed(lnksta)) { + case PCIE_SPEED_2_5GT: + return 2500; + case PCIE_SPEED_5_0GT: + return 5000; + case PCIE_SPEED_8_0GT: + return 8000; + case PCIE_SPEED_16_0GT: + return 16000; + case PCIE_SPEED_32_0GT: + return 32000; + case PCIE_SPEED_64_0GT: + return 64000; + default: + break; + } + + return -EINVAL; +} +EXPORT_SYMBOL(pcie_link_speed_mbps); + /** * pcie_bandwidth_available - determine minimum link settings of a PCIe * device and its bandwidth limitation @@ -6266,8 +6389,7 @@ u32 pcie_bandwidth_available(struct pci_dev *dev, struct pci_dev **limiting_dev, while (dev) { pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta); - next_speed = pcie_link_speed[FIELD_GET(PCI_EXP_LNKSTA_CLS, - lnksta)]; + next_speed = to_pcie_link_speed(lnksta); next_width = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta); next_bw = next_width * PCIE_SPEED2MBS_ENC(next_speed); @@ -6698,14 +6820,15 @@ static void pci_request_resource_alignment(struct pci_dev *dev, int bar, resource_size_t align, bool resize) { struct resource *r = &dev->resource[bar]; + const char *r_name = pci_resource_name(dev, bar); resource_size_t size; if (!(r->flags & IORESOURCE_MEM)) return; if (r->flags & IORESOURCE_PCI_FIXED) { - pci_info(dev, "BAR%d %pR: ignoring requested alignment %#llx\n", - bar, r, (unsigned long long)align); + pci_info(dev, "%s %pR: ignoring requested alignment %#llx\n", + r_name, r, (unsigned long long)align); return; } @@ -6741,8 +6864,8 @@ static void pci_request_resource_alignment(struct pci_dev *dev, int bar, * devices and we use the second. */ - pci_info(dev, "BAR%d %pR: requesting alignment to %#llx\n", - bar, r, (unsigned long long)align); + pci_info(dev, "%s %pR: requesting alignment to %#llx\n", + r_name, r, (unsigned long long)align); if (resize) { r->start = 0; |