diff options
Diffstat (limited to 'drivers/serial')
-rw-r--r-- | drivers/serial/8250.c | 25 | ||||
-rw-r--r-- | drivers/serial/dz.c | 2 | ||||
-rw-r--r-- | drivers/serial/ip22zilog.c | 3 | ||||
-rw-r--r-- | drivers/serial/serial_core.c | 1 | ||||
-rw-r--r-- | drivers/serial/sunsab.c | 2 | ||||
-rw-r--r-- | drivers/serial/sunsu.c | 40 | ||||
-rw-r--r-- | drivers/serial/vr41xx_siu.c | 1 |
7 files changed, 57 insertions, 17 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 0995430e4cf1..0ae9ced00ed4 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -299,6 +299,7 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset) static unsigned int serial_in(struct uart_8250_port *up, int offset) { + unsigned int tmp; offset = map_8250_in_reg(up, offset) << up->port.regshift; switch (up->port.iotype) { @@ -317,6 +318,13 @@ static unsigned int serial_in(struct uart_8250_port *up, int offset) return __raw_readl(up->port.membase + offset); #endif + case UPIO_TSI: + if (offset == UART_IIR) { + tmp = readl((u32 *)(up->port.membase + UART_RX)); + return (cpu_to_le32(tmp) >> 8) & 0xff; + } else + return readb(up->port.membase + offset); + default: return inb(up->port.iobase + offset); } @@ -346,6 +354,10 @@ serial_out(struct uart_8250_port *up, int offset, int value) __raw_writel(value, up->port.membase + offset); break; #endif + case UPIO_TSI: + if (!((offset == UART_IER) && (value & UART_IER_UUE))) + writeb(value, up->port.membase + offset); + break; default: outb(value, up->port.iobase + offset); @@ -2240,10 +2252,14 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) touch_nmi_watchdog(); - if (oops_in_progress) { - locked = spin_trylock_irqsave(&up->port.lock, flags); + local_irq_save(flags); + if (up->port.sysrq) { + /* serial8250_handle_port() already took the lock */ + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); } else - spin_lock_irqsave(&up->port.lock, flags); + spin_lock(&up->port.lock); /* * First save the IER then disable the interrupts @@ -2265,7 +2281,8 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) serial_out(up, UART_IER, ier); if (locked) - spin_unlock_irqrestore(&up->port.lock, flags); + spin_unlock(&up->port.lock); + local_irq_restore(flags); } static int serial8250_console_setup(struct console *co, char *options) diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c index d119c8296a78..8a98aae80e22 100644 --- a/drivers/serial/dz.c +++ b/drivers/serial/dz.c @@ -673,7 +673,7 @@ static void dz_reset(struct dz_port *dport) } #ifdef CONFIG_SERIAL_DZ_CONSOLE -static void dz_console_putchar(struct uart_port *port, int ch) +static void dz_console_putchar(struct uart_port *uport, int ch) { struct dz_port *dport = (struct dz_port *)uport; unsigned long flags; diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c index 342042889f6e..5ff269fb604c 100644 --- a/drivers/serial/ip22zilog.c +++ b/drivers/serial/ip22zilog.c @@ -1143,9 +1143,8 @@ static void __init ip22zilog_prepare(void) up[(chip * 2) + 1].port.fifosize = 1; up[(chip * 2) + 1].port.ops = &ip22zilog_pops; up[(chip * 2) + 1].port.type = PORT_IP22ZILOG; - up[(chip * 2) + 1].port.flags |= IP22ZILOG_FLAG_IS_CHANNEL_A; up[(chip * 2) + 1].port.line = (chip * 2) + 1; - up[(chip * 2) + 1].flags = 0; + up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A; } } diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index d5f636fbf29a..80ef7d482756 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -2036,6 +2036,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port) case UPIO_MEM: case UPIO_MEM32: case UPIO_AU: + case UPIO_TSI: snprintf(address, sizeof(address), "MMIO 0x%lx", port->mapbase); break; diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index 0dbd4df44c05..979497f108c8 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -1052,7 +1052,7 @@ static int __devinit sab_probe(struct of_device *op, const struct of_device_id * if (err) return err; - err = sunsab_init_one(&up[0], op, 0, + err = sunsab_init_one(&up[1], op, 0, (inst * 2) + 1); if (err) { of_iounmap(up[0].port.membase, diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index f9013baba05b..d3a5aeee73a3 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1200,6 +1200,11 @@ static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up) if (up->port.type == PORT_UNKNOWN) return -ENODEV; + printk("%s: %s port at %lx, irq %u\n", + to_of_device(up->port.dev)->node->full_name, + (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse", + up->port.mapbase, up->port.irq); + #ifdef CONFIG_SERIO serio = &up->serio; serio->port_data = up; @@ -1406,25 +1411,35 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m struct device_node *dp = op->node; struct uart_sunsu_port *up; struct resource *rp; + enum su_type type; int err; - if (inst >= UART_NR) - return -EINVAL; + type = su_get_type(dp); + if (type == SU_PORT_PORT) { + if (inst >= UART_NR) + return -EINVAL; + up = &sunsu_ports[inst]; + } else { + up = kzalloc(sizeof(*up), GFP_KERNEL); + if (!up) + return -ENOMEM; + } - up = &sunsu_ports[inst]; up->port.line = inst; spin_lock_init(&up->port.lock); - up->su_type = su_get_type(dp); + up->su_type = type; rp = &op->resource[0]; - up->port.mapbase = op->resource[0].start; - + up->port.mapbase = rp->start; up->reg_size = (rp->end - rp->start) + 1; up->port.membase = of_ioremap(rp, 0, up->reg_size, "su"); - if (!up->port.membase) + if (!up->port.membase) { + if (type != SU_PORT_PORT) + kfree(up); return -ENOMEM; + } up->port.irq = op->irqs[0]; @@ -1436,8 +1451,11 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m err = 0; if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) { err = sunsu_kbd_ms_init(up); - if (err) + if (err) { + kfree(up); goto out_unmap; + } + dev_set_drvdata(&op->dev, up); return 0; } @@ -1476,8 +1494,12 @@ static int __devexit su_remove(struct of_device *dev) #ifdef CONFIG_SERIO serio_unregister_port(&up->serio); #endif - } else if (up->port.type != PORT_UNKNOWN) + kfree(up); + } else if (up->port.type != PORT_UNKNOWN) { uart_remove_one_port(&sunsu_reg, &up->port); + } + + dev_set_drvdata(&dev->dev, NULL); return 0; } diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c index e93d0edc2e08..6c8b0ea83c3c 100644 --- a/drivers/serial/vr41xx_siu.c +++ b/drivers/serial/vr41xx_siu.c @@ -38,6 +38,7 @@ #include <linux/tty_flip.h> #include <asm/io.h> +#include <asm/vr41xx/irq.h> #include <asm/vr41xx/siu.h> #include <asm/vr41xx/vr41xx.h> |