diff options
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 11 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/serial_mctrl_gpio.h | 4 | ||||
| -rw-r--r-- | drivers/tty/serial/uartlite.c | 8 |
4 files changed, 16 insertions, 8 deletions
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index e213da01a3d7..00ad2637b08c 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1403,9 +1403,18 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p) /* * Empty the RX FIFO, we are not interested in anything * received during the half-duplex transmission. + * Enable previously disabled RX interrupts. */ - if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) + if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) { serial8250_clear_fifos(p); + + serial8250_rpm_get(p); + + p->ier |= UART_IER_RLSI | UART_IER_RDI; + serial_port_out(&p->port, UART_IER, p->ier); + + serial8250_rpm_put(p); + } } static void serial8250_em485_handle_stop_tx(unsigned long arg) diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 64742a086ae3..4d7cb9c04fce 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -324,7 +324,6 @@ config SERIAL_8250_EM config SERIAL_8250_RT288X bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support" depends on SERIAL_8250 - depends on MIPS || COMPILE_TEST default y if MIPS_ALCHEMY || SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620 help Selecting this option will add support for the alternate register diff --git a/drivers/tty/serial/serial_mctrl_gpio.h b/drivers/tty/serial/serial_mctrl_gpio.h index 9716db283290..bcfad5d1db61 100644 --- a/drivers/tty/serial/serial_mctrl_gpio.h +++ b/drivers/tty/serial/serial_mctrl_gpio.h @@ -62,7 +62,7 @@ struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, enum mctrl_gpio_idx gidx); /* - * Request and set direction of modem control lines GPIOs and sets up irq + * Request and set direction of modem control line GPIOs and set up irq * handling. * devm_* functions are used, so there's no need to call mctrl_gpio_free(). * Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on @@ -71,7 +71,7 @@ struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx); /* - * Request and set direction of modem control lines GPIOs. + * Request and set direction of modem control line GPIOs. * devm_* functions are used, so there's no need to call mctrl_gpio_free(). * Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on * allocation error. diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index c9fdfc8bf47f..d08baa668d5d 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -72,7 +72,7 @@ static void uartlite_outbe32(u32 val, void __iomem *addr) iowrite32be(val, addr); } -static const struct uartlite_reg_ops uartlite_be = { +static struct uartlite_reg_ops uartlite_be = { .in = uartlite_inbe32, .out = uartlite_outbe32, }; @@ -87,21 +87,21 @@ static void uartlite_outle32(u32 val, void __iomem *addr) iowrite32(val, addr); } -static const struct uartlite_reg_ops uartlite_le = { +static struct uartlite_reg_ops uartlite_le = { .in = uartlite_inle32, .out = uartlite_outle32, }; static inline u32 uart_in32(u32 offset, struct uart_port *port) { - const struct uartlite_reg_ops *reg_ops = port->private_data; + struct uartlite_reg_ops *reg_ops = port->private_data; return reg_ops->in(port->membase + offset); } static inline void uart_out32(u32 val, u32 offset, struct uart_port *port) { - const struct uartlite_reg_ops *reg_ops = port->private_data; + struct uartlite_reg_ops *reg_ops = port->private_data; reg_ops->out(val, port->membase + offset); } |