summaryrefslogtreecommitdiff
path: root/drivers/usb/musb/musb_core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/musb/musb_core.c')
-rw-r--r--drivers/usb/musb/musb_core.c68
1 files changed, 51 insertions, 17 deletions
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index ba13529cbd52..c3791a01ab31 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -132,7 +132,7 @@ static inline struct musb *dev_to_musb(struct device *dev)
/*-------------------------------------------------------------------------*/
#ifndef CONFIG_BLACKFIN
-static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
+static int musb_ulpi_read(struct usb_phy *phy, u32 reg)
{
void __iomem *addr = phy->io_priv;
int i = 0;
@@ -151,7 +151,7 @@ static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
* ULPICarKitControlDisableUTMI after clearing POWER_SUSPENDM.
*/
- musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
+ musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg);
musb_writeb(addr, MUSB_ULPI_REG_CONTROL,
MUSB_ULPI_REG_REQ | MUSB_ULPI_RDN_WR);
@@ -176,7 +176,7 @@ out:
return ret;
}
-static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
+static int musb_ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
{
void __iomem *addr = phy->io_priv;
int i = 0;
@@ -191,8 +191,8 @@ static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
power &= ~MUSB_POWER_SUSPENDM;
musb_writeb(addr, MUSB_POWER, power);
- musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)offset);
- musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)data);
+ musb_writeb(addr, MUSB_ULPI_REG_ADDR, (u8)reg);
+ musb_writeb(addr, MUSB_ULPI_REG_DATA, (u8)val);
musb_writeb(addr, MUSB_ULPI_REG_CONTROL, MUSB_ULPI_REG_REQ);
while (!(musb_readb(addr, MUSB_ULPI_REG_CONTROL)
@@ -1360,8 +1360,7 @@ static int ep_config_from_table(struct musb *musb)
break;
}
- printk(KERN_DEBUG "%s: setup fifo_mode %d\n",
- musb_driver_name, fifo_mode);
+ pr_debug("%s: setup fifo_mode %d\n", musb_driver_name, fifo_mode);
done:
@@ -1390,7 +1389,7 @@ done:
musb->nr_endpoints = max(epn, musb->nr_endpoints);
}
- printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n",
+ pr_debug("%s: %d/%d max ep, %d/%d memory\n",
musb_driver_name,
n + 1, musb->config->num_eps * 2 - 1,
offset, (1 << (musb->config->ram_bits + 2)));
@@ -1491,8 +1490,7 @@ static int musb_core_init(u16 musb_type, struct musb *musb)
if (reg & MUSB_CONFIGDATA_SOFTCONE)
strcat(aInfo, ", SoftConn");
- printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n",
- musb_driver_name, reg, aInfo);
+ pr_debug("%s: ConfigData=0x%02x (%s)\n", musb_driver_name, reg, aInfo);
aDate[0] = 0;
if (MUSB_CONTROLLER_MHDRC == musb_type) {
@@ -1502,9 +1500,8 @@ static int musb_core_init(u16 musb_type, struct musb *musb)
musb->is_multipoint = 0;
type = "";
#ifndef CONFIG_USB_OTG_BLACKLIST_HUB
- printk(KERN_ERR
- "%s: kernel must blacklist external hubs\n",
- musb_driver_name);
+ pr_err("%s: kernel must blacklist external hubs\n",
+ musb_driver_name);
#endif
}
@@ -1513,8 +1510,8 @@ static int musb_core_init(u16 musb_type, struct musb *musb)
snprintf(aRevision, 32, "%d.%d%s", MUSB_HWVERS_MAJOR(musb->hwvers),
MUSB_HWVERS_MINOR(musb->hwvers),
(musb->hwvers & MUSB_HWVERS_RC) ? "RC" : "");
- printk(KERN_DEBUG "%s: %sHDRC RTL version %s %s\n",
- musb_driver_name, type, aRevision, aDate);
+ pr_debug("%s: %sHDRC RTL version %s %s\n",
+ musb_driver_name, type, aRevision, aDate);
/* configure ep0 */
musb_configure_ep0(musb);
@@ -1668,7 +1665,7 @@ EXPORT_SYMBOL_GPL(musb_interrupt);
static bool use_dma = 1;
/* "modprobe ... use_dma=0" etc */
-module_param(use_dma, bool, 0);
+module_param(use_dma, bool, 0644);
MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit)
@@ -1705,6 +1702,23 @@ EXPORT_SYMBOL_GPL(musb_dma_completion);
#define use_dma 0
#endif
+static void (*musb_phy_callback)(enum musb_vbus_id_status status);
+
+/*
+ * musb_mailbox - optional phy notifier function
+ * @status phy state change
+ *
+ * Optionally gets called from the USB PHY. Note that the USB PHY must be
+ * disabled at the point the phy_callback is registered or unregistered.
+ */
+void musb_mailbox(enum musb_vbus_id_status status)
+{
+ if (musb_phy_callback)
+ musb_phy_callback(status);
+
+};
+EXPORT_SYMBOL_GPL(musb_mailbox);
+
/*-------------------------------------------------------------------------*/
static ssize_t
@@ -2017,7 +2031,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
/* We need musb_read/write functions initialized for PM */
pm_runtime_use_autosuspend(musb->controller);
pm_runtime_set_autosuspend_delay(musb->controller, 200);
- pm_runtime_irq_safe(musb->controller);
pm_runtime_enable(musb->controller);
/* The musb_platform_init() call:
@@ -2095,6 +2108,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
#ifndef CONFIG_MUSB_PIO_ONLY
if (!musb->ops->dma_init || !musb->ops->dma_exit) {
dev_err(dev, "DMA controller not set\n");
+ status = -ENODEV;
goto fail2;
}
musb_dma_controller_create = musb->ops->dma_init;
@@ -2117,8 +2131,15 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb->xceiv->io_ops = &musb_ulpi_access;
}
+ if (musb->ops->phy_callback)
+ musb_phy_callback = musb->ops->phy_callback;
+
pm_runtime_get_sync(musb->controller);
+ status = usb_phy_init(musb->xceiv);
+ if (status < 0)
+ goto err_usb_phy_init;
+
if (use_dma && dev->dma_mask) {
musb->dma_controller =
musb_dma_controller_create(musb, musb->mregs);
@@ -2218,6 +2239,12 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
pm_runtime_put(musb->controller);
+ /*
+ * For why this is currently needed, see commit 3e43a0725637
+ * ("usb: musb: core: add pm_runtime_irq_safe()")
+ */
+ pm_runtime_irq_safe(musb->controller);
+
return 0;
fail5:
@@ -2233,7 +2260,11 @@ fail3:
cancel_delayed_work_sync(&musb->deassert_reset_work);
if (musb->dma_controller)
musb_dma_controller_destroy(musb->dma_controller);
+
fail2_5:
+ usb_phy_shutdown(musb->xceiv);
+
+err_usb_phy_init:
pm_runtime_put_sync(musb->controller);
fail2:
@@ -2289,10 +2320,13 @@ static int musb_remove(struct platform_device *pdev)
*/
musb_exit_debugfs(musb);
musb_shutdown(pdev);
+ musb_phy_callback = NULL;
if (musb->dma_controller)
musb_dma_controller_destroy(musb->dma_controller);
+ usb_phy_shutdown(musb->xceiv);
+
cancel_work_sync(&musb->irq_work);
cancel_delayed_work_sync(&musb->finish_resume_work);
cancel_delayed_work_sync(&musb->deassert_reset_work);
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-09 19:52:58 +0000