diff options
Diffstat (limited to 'drivers/usb')
51 files changed, 533 insertions, 311 deletions
diff --git a/drivers/usb/cdns3/cdns3-imx.c b/drivers/usb/cdns3/cdns3-imx.c index 22a56c4dce67..7990fee03fe4 100644 --- a/drivers/usb/cdns3/cdns3-imx.c +++ b/drivers/usb/cdns3/cdns3-imx.c @@ -185,7 +185,11 @@ static int cdns_imx_probe(struct platform_device *pdev) } data->num_clks = ARRAY_SIZE(imx_cdns3_core_clks); - data->clks = (struct clk_bulk_data *)imx_cdns3_core_clks; + data->clks = devm_kmemdup(dev, imx_cdns3_core_clks, + sizeof(imx_cdns3_core_clks), GFP_KERNEL); + if (!data->clks) + return -ENOMEM; + ret = devm_clk_bulk_get(dev, data->num_clks, data->clks); if (ret) return ret; @@ -214,20 +218,16 @@ err: return ret; } -static int cdns_imx_remove_core(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - - platform_device_unregister(pdev); - - return 0; -} - static int cdns_imx_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; + struct cdns_imx *data = dev_get_drvdata(dev); - device_for_each_child(dev, NULL, cdns_imx_remove_core); + pm_runtime_get_sync(dev); + of_platform_depopulate(dev); + clk_bulk_disable_unprepare(data->num_clks, data->clks); + pm_runtime_disable(dev); + pm_runtime_put_noidle(dev); platform_set_drvdata(pdev, NULL); return 0; diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index 9e12152ea46b..8b7bc10b6e8b 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -139,9 +139,13 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev) misc_pdev = of_find_device_by_node(args.np); of_node_put(args.np); - if (!misc_pdev || !platform_get_drvdata(misc_pdev)) + if (!misc_pdev) return ERR_PTR(-EPROBE_DEFER); + if (!platform_get_drvdata(misc_pdev)) { + put_device(&misc_pdev->dev); + return ERR_PTR(-EPROBE_DEFER); + } data->dev = &misc_pdev->dev; /* diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index f52f1bc0559f..781905745812 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1895,6 +1895,10 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x04d8, 0xfd08), .driver_info = IGNORE_DEVICE, }, + + { USB_DEVICE(0x04d8, 0xf58b), + .driver_info = IGNORE_DEVICE, + }, #endif /*Samsung phone in firmware update mode */ diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 02d0cfd23bb2..508b1c3f8b73 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -465,13 +465,23 @@ static int service_outstanding_interrupt(struct wdm_device *desc) if (!desc->resp_count || !--desc->resp_count) goto out; + if (test_bit(WDM_DISCONNECTING, &desc->flags)) { + rv = -ENODEV; + goto out; + } + if (test_bit(WDM_RESETTING, &desc->flags)) { + rv = -EIO; + goto out; + } + set_bit(WDM_RESPONDING, &desc->flags); spin_unlock_irq(&desc->iuspin); rv = usb_submit_urb(desc->response, GFP_KERNEL); spin_lock_irq(&desc->iuspin); if (rv) { - dev_err(&desc->intf->dev, - "usb_submit_urb failed with result %d\n", rv); + if (!test_bit(WDM_DISCONNECTING, &desc->flags)) + dev_err(&desc->intf->dev, + "usb_submit_urb failed with result %d\n", rv); /* make sure the next notification trigger a submit */ clear_bit(WDM_RESPONDING, &desc->flags); @@ -1027,9 +1037,9 @@ static void wdm_disconnect(struct usb_interface *intf) wake_up_all(&desc->wait); mutex_lock(&desc->rlock); mutex_lock(&desc->wlock); - kill_urbs(desc); cancel_work_sync(&desc->rxwork); cancel_work_sync(&desc->service_outs_intr); + kill_urbs(desc); mutex_unlock(&desc->wlock); mutex_unlock(&desc->rlock); diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 67cbd42421be..c9f6e9758288 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -274,8 +274,25 @@ static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, i #define usblp_reset(usblp)\ usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0) -#define usblp_hp_channel_change_request(usblp, channel, buffer) \ - usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1) +static int usblp_hp_channel_change_request(struct usblp *usblp, int channel, u8 *new_channel) +{ + u8 *buf; + int ret; + + buf = kzalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, + USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, + channel, buf, 1); + if (ret == 0) + *new_channel = buf[0]; + + kfree(buf); + + return ret; +} /* * See the description for usblp_select_alts() below for the usage @@ -1312,14 +1329,17 @@ static int usblp_set_protocol(struct usblp *usblp, int protocol) if (protocol < USBLP_FIRST_PROTOCOL || protocol > USBLP_LAST_PROTOCOL) return -EINVAL; - alts = usblp->protocol[protocol].alt_setting; - if (alts < 0) - return -EINVAL; - r = usb_set_interface(usblp->dev, usblp->ifnum, alts); - if (r < 0) { - printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n", - alts, usblp->ifnum); - return r; + /* Don't unnecessarily set the interface if there's a single alt. */ + if (usblp->intf->num_altsetting > 1) { + alts = usblp->protocol[protocol].alt_setting; + if (alts < 0) + return -EINVAL; + r = usb_set_interface(usblp->dev, usblp->ifnum, alts); + if (r < 0) { + printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n", + alts, usblp->ifnum); + return r; + } } usblp->bidir = (usblp->protocol[protocol].epread != NULL); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 60886a7464c3..ad5a0f405a75 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1649,14 +1649,12 @@ static void __usb_hcd_giveback_urb(struct urb *urb) urb->status = status; /* * This function can be called in task context inside another remote - * coverage collection section, but KCOV doesn't support that kind of + * coverage collection section, but kcov doesn't support that kind of * recursion yet. Only collect coverage in softirq context for now. */ - if (in_serving_softirq()) - kcov_remote_start_usb((u64)urb->dev->bus->busnum); + kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum); urb->complete(urb); - if (in_serving_softirq()) - kcov_remote_stop(); + kcov_remote_stop_softirq(); usb_anchor_resume_wakeups(anchor); atomic_dec(&urb->use_count); diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 0a0d11151cfb..ad4c94366dad 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -1543,7 +1543,6 @@ static void dwc2_hsotg_complete_oursetup(struct usb_ep *ep, static struct dwc2_hsotg_ep *ep_from_windex(struct dwc2_hsotg *hsotg, u32 windex) { - struct dwc2_hsotg_ep *ep; int dir = (windex & USB_DIR_IN) ? 1 : 0; int idx = windex & 0x7F; @@ -1553,12 +1552,7 @@ static struct dwc2_hsotg_ep *ep_from_windex(struct dwc2_hsotg *hsotg, if (idx > hsotg->num_of_eps) return NULL; - ep = index_to_ep(hsotg, idx, dir); - - if (idx && ep->dir_in != dir) - return NULL; - - return ep; + return index_to_ep(hsotg, idx, dir); } /** diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 841daec70b6e..3101f0dcf6ae 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1758,7 +1758,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) if (PMSG_IS_AUTO(msg)) break; - ret = dwc3_core_init(dwc); + ret = dwc3_core_init_for_resume(dwc); if (ret) return ret; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 2f95f08ca511..1b241f937d8f 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -285,6 +285,7 @@ /* Global USB2 PHY Vendor Control Register */ #define DWC3_GUSB2PHYACC_NEWREGREQ BIT(25) +#define DWC3_GUSB2PHYACC_DONE BIT(24) #define DWC3_GUSB2PHYACC_BUSY BIT(23) #define DWC3_GUSB2PHYACC_WRITE BIT(22) #define DWC3_GUSB2PHYACC_ADDR(n) (n << 16) diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c index 417e05381b5d..bdf1f98dfad8 100644 --- a/drivers/usb/dwc3/dwc3-meson-g12a.c +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c @@ -754,7 +754,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) ret = priv->drvdata->setup_regmaps(priv, base); if (ret) - return ret; + goto err_disable_clks; if (priv->vbus) { ret = regulator_enable(priv->vbus); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 78cb4db8a6e4..ee44321fee38 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1763,6 +1763,8 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, list_for_each_entry_safe(r, t, &dep->started_list, list) dwc3_gadget_move_cancelled_request(r); + dep->flags &= ~DWC3_EP_WAIT_TRANSFER_COMPLETE; + goto out; } } @@ -2083,6 +2085,7 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) static void dwc3_gadget_disable_irq(struct dwc3 *dwc); static void __dwc3_gadget_stop(struct dwc3 *dwc); +static int __dwc3_gadget_start(struct dwc3 *dwc); static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) { @@ -2145,6 +2148,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) % dwc->ev_buf->length; } + } else { + __dwc3_gadget_start(dwc); } ret = dwc3_gadget_run_stop(dwc, is_on, false); @@ -2319,10 +2324,6 @@ static int dwc3_gadget_start(struct usb_gadget *g, } dwc->gadget_driver = driver; - - if (pm_runtime_active(dwc->dev)) - __dwc3_gadget_start(dwc); - spin_unlock_irqrestore(&dwc->lock, flags); return 0; @@ -2348,13 +2349,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g) unsigned long flags; spin_lock_irqsave(&dwc->lock, flags); - - if (pm_runtime_suspended(dwc->dev)) - goto out; - - __dwc3_gadget_stop(dwc); - -out: dwc->gadget_driver = NULL; spin_unlock_irqrestore(&dwc->lock, flags); diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c index aa213c9815f6..f23f4c9a557e 100644 --- a/drivers/usb/dwc3/ulpi.c +++ b/drivers/usb/dwc3/ulpi.c @@ -7,6 +7,8 @@ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> */ +#include <linux/delay.h> +#include <linux/time64.h> #include <linux/ulpi/regs.h> #include "core.h" @@ -17,14 +19,28 @@ DWC3_GUSB2PHYACC_ADDR(ULPI_ACCESS_EXTENDED) | \ DWC3_GUSB2PHYACC_EXTEND_ADDR(a) : DWC3_GUSB2PHYACC_ADDR(a)) -static int dwc3_ulpi_busyloop(struct dwc3 *dwc) +#define DWC3_ULPI_BASE_DELAY DIV_ROUND_UP(NSEC_PER_SEC, 60000000L) + +static int dwc3_ulpi_busyloop(struct dwc3 *dwc, u8 addr, bool read) { - unsigned int count = 1000; + unsigned long ns = 5L * DWC3_ULPI_BASE_DELAY; + unsigned int count = 10000; u32 reg; + if (addr >= ULPI_EXT_VENDOR_SPECIFIC) + ns += DWC3_ULPI_BASE_DELAY; + + if (read) + ns += DWC3_ULPI_BASE_DELAY; + + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + if (reg & DWC3_GUSB2PHYCFG_SUSPHY) + usleep_range(1000, 1200); + while (count--) { + ndelay(ns); reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0)); - if (!(reg & DWC3_GUSB2PHYACC_BUSY)) + if (reg & DWC3_GUSB2PHYACC_DONE) return 0; cpu_relax(); } @@ -38,16 +54,10 @@ static int dwc3_ulpi_read(struct device *dev, u8 addr) u32 reg; int ret; - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - if (reg & DWC3_GUSB2PHYCFG_SUSPHY) { - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); - } - reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr); dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg); - ret = dwc3_ulpi_busyloop(dwc); + ret = dwc3_ulpi_busyloop(dwc, addr, true); if (ret) return ret; @@ -61,17 +71,11 @@ static int dwc3_ulpi_write(struct device *dev, u8 addr, u8 val) struct dwc3 *dwc = dev_get_drvdata(dev); u32 reg; - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - if (reg & DWC3_GUSB2PHYCFG_SUSPHY) { - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); - } - reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr); reg |= DWC3_GUSB2PHYACC_WRITE | val; dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg); - return dwc3_ulpi_busyloop(dwc); + return dwc3_ulpi_busyloop(dwc, addr, false); } static const struct ulpi_ops dwc3_ulpi_ops = { diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 7e47e6223089..2d152571a7de 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -265,6 +265,7 @@ config USB_CONFIGFS_NCM depends on NET select USB_U_ETHER select USB_F_NCM + select CRC32 help NCM is an advanced protocol for Ethernet encapsulation, allows grouping of several ethernet frames into one USB transfer and @@ -314,6 +315,7 @@ config USB_CONFIGFS_EEM depends on NET select USB_U_ETHER select USB_F_EEM + select CRC32 help CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM and therefore can be supported by more hardware. Technically ECM and diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index c6d455f2bb92..1a556a628971 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -392,8 +392,11 @@ int usb_function_deactivate(struct usb_function *function) spin_lock_irqsave(&cdev->lock, flags); - if (cdev->deactivations == 0) + if (cdev->deactivations == 0) { + spin_unlock_irqrestore(&cdev->lock, flags); status = usb_gadget_deactivate(cdev->gadget); + spin_lock_irqsave(&cdev->lock, flags); + } if (status == 0) cdev->deactivations++; @@ -424,8 +427,11 @@ int usb_function_activate(struct usb_function *function) status = -EINVAL; else { cdev->deactivations--; - if (cdev->deactivations == 0) + if (cdev->deactivations == 0) { + spin_unlock_irqrestore(&cdev->lock, flags); status = usb_gadget_activate(cdev->gadget); + spin_lock_irqsave(&cdev->lock, flags); + } } spin_unlock_irqrestore(&cdev->lock, flags); diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 56051bb97349..36ffb43f9c1a 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -221,9 +221,16 @@ static ssize_t gadget_dev_desc_bcdUSB_store(struct config_item *item, static ssize_t gadget_dev_desc_UDC_show(struct config_item *item, char *page) { - char *udc_name = to_gadget_info(item)->composite.gadget_driver.udc_name; + struct gadget_info *gi = to_gadget_info(item); + char *udc_name; + int ret; + + mutex_lock(&gi->lock); + udc_name = gi->composite.gadget_driver.udc_name; + ret = sprintf(page, "%s\n", udc_name ?: ""); + mutex_unlock(&gi->lock); - return sprintf(page, "%s\n", udc_name ?: ""); + return ret; } static int unregister_gadget(struct gadget_info *gi) @@ -1248,9 +1255,9 @@ static void purge_configs_funcs(struct gadget_info *gi) cfg = container_of(c, struct config_usb_cfg, c); - list_for_each_entry_safe(f, tmp, &c->functions, list) { + list_for_each_entry_safe_reverse(f, tmp, &c->functions, list) { - list_move_tail(&f->list, &cfg->func_list); + list_move(&f->list, &cfg->func_list); if (f->unbind) { dev_dbg(&gi->cdev.gadget->dev, "unbind function '%s'/%p\n", @@ -1536,7 +1543,7 @@ static const struct usb_gadget_driver configfs_driver_template = { .suspend = configfs_composite_suspend, .resume = configfs_composite_resume, - .max_speed = USB_SPEED_SUPER, + .max_speed = USB_SPEED_SUPER_PLUS, .driver = { .owner = THIS_MODULE, .name = "configfs-gadget", @@ -1576,7 +1583,7 @@ static struct config_group *gadgets_make( gi->composite.unbind = configfs_do_nothing; gi->composite.suspend = NULL; gi->composite.resume = NULL; - gi->composite.max_speed = USB_SPEED_SUPER; + gi->composite.max_speed = USB_SPEED_SUPER_PLUS; spin_lock_init(&gi->spinlock); mutex_init(&gi->lock); diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c index 64a4112068fc..2f1eb2e81d30 100644 --- a/drivers/usb/gadget/function/f_printer.c +++ b/drivers/usb/gadget/function/f_printer.c @@ -1162,6 +1162,7 @@ fail_tx_reqs: printer_req_free(dev->in_ep, req); } + usb_free_all_descriptors(f); return ret; } diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index 3633df6d7610..5d960b6603b6 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -271,7 +271,7 @@ static struct usb_endpoint_descriptor fs_epout_desc = { .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC, - .wMaxPacketSize = cpu_to_le16(1023), + /* .wMaxPacketSize = DYNAMIC */ .bInterval = 1, }; @@ -280,7 +280,7 @@ static struct usb_endpoint_descriptor hs_epout_desc = { .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC, - .wMaxPacketSize = cpu_to_le16(1024), + /* .wMaxPacketSize = DYNAMIC */ .bInterval = 4, }; @@ -348,7 +348,7 @@ static struct usb_endpoint_descriptor fs_epin_desc = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC, - .wMaxPacketSize = cpu_to_le16(1023), + /* .wMaxPacketSize = DYNAMIC */ .bInterval = 1, }; @@ -357,7 +357,7 @@ static struct usb_endpoint_descriptor hs_epin_desc = { .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC, - .wMaxPacketSize = cpu_to_le16(1024), + /* .wMaxPacketSize = DYNAMIC */ .bInterval = 4, }; @@ -444,12 +444,28 @@ struct cntrl_range_lay3 { __le32 dRES; } __packed; -static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts, +static int set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts, struct usb_endpoint_descriptor *ep_desc, - unsigned int factor, bool is_playback) + enum usb_device_speed speed, bool is_playback) { int chmask, srate, ssize; - u16 max_packet_size; + u16 max_size_bw, max_size_ep; + unsigned int factor; + + switch (speed) { + case USB_SPEED_FULL: + max_size_ep = 1023; + factor = 1000; + break; + + case USB_SPEED_HIGH: + max_size_ep = 1024; + factor = 8000; + break; + + default: + return -EINVAL; + } if (is_playback) { chmask = uac2_opts->p_chmask; @@ -461,10 +477,12 @@ static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts, ssize = uac2_opts->c_ssize; } - max_packet_size = num_channels(chmask) * ssize * + max_size_bw = num_channels(chmask) * ssize * DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1))); - ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_packet_size, - le16_to_cpu(ep_desc->wMaxPacketSize))); + ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_size_bw, + max_size_ep)); + + return 0; } /* Use macro to overcome line length limitation */ @@ -670,10 +688,33 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) } /* Calculate wMaxPacketSize according to audio bandwidth */ - set_ep_max_packet_size(uac2_opts, &fs_epin_desc, 1000, true); - set_ep_max_packet_size(uac2_opts, &fs_epout_desc, 1000, false); - set_ep_max_packet_size(uac2_opts, &hs_epin_desc, 8000, true); - set_ep_max_packet_size(uac2_opts, &hs_epout_desc, 8000, false); + ret = set_ep_max_packet_size(uac2_opts, &fs_epin_desc, USB_SPEED_FULL, + true); + if (ret < 0) { + dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); + return ret; + } + + ret = set_ep_max_packet_size(uac2_opts, &fs_epout_desc, USB_SPEED_FULL, + false); + if (ret < 0) { + dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); + return ret; + } + + ret = set_ep_max_packet_size(uac2_opts, &hs_epin_desc, USB_SPEED_HIGH, + true); + if (ret < 0) { + dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); + return ret; + } + + ret = set_ep_max_packet_size(uac2_opts, &hs_epout_desc, USB_SPEED_HIGH, + false); + if (ret < 0) { + dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); + return ret; + } if (EPOUT_EN(uac2_opts)) { agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc); diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 31ea76adcc0d..c019f2b0c0af 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -45,9 +45,10 @@ #define UETH__VERSION "29-May-2008" /* Experiments show that both Linux and Windows hosts allow up to 16k - * frame sizes. Set the max size to 15k+52 to prevent allocating 32k + * frame sizes. Set the max MTU size to 15k+52 to prevent allocating 32k * blocks and still have efficient handling. */ -#define GETHER_MAX_ETH_FRAME_LEN 15412 +#define GETHER_MAX_MTU_SIZE 15412 +#define GETHER_MAX_ETH_FRAME_LEN (GETHER_MAX_MTU_SIZE + ETH_HLEN) struct eth_dev { /* lock is held while accessing port_usb @@ -786,7 +787,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, /* MTU range: 14 - 15412 */ net->min_mtu = ETH_HLEN; - net->max_mtu = GETHER_MAX_ETH_FRAME_LEN; + net->max_mtu = GETHER_MAX_MTU_SIZE; dev->gadget = g; SET_NETDEV_DEV(net, &g->dev); @@ -848,7 +849,7 @@ struct net_device *gether_setup_name_default(const char *netname) /* MTU range: 14 - 15412 */ net->min_mtu = ETH_HLEN; - net->max_mtu = GETHER_MAX_ETH_FRAME_LEN; + net->max_mtu = GETHER_MAX_MTU_SIZE; return net; } diff --git a/drivers/usb/gadget/legacy/acm_ms.c b/drivers/usb/gadget/legacy/acm_ms.c index 59be2d8417c9..e8033e5f0c18 100644 --- a/drivers/usb/gadget/legacy/acm_ms.c +++ b/drivers/usb/gadget/legacy/acm_ms.c @@ -200,8 +200,10 @@ static int acm_ms_bind(struct usb_composite_dev *cdev) struct usb_descriptor_header *usb_desc; usb_desc = usb_otg_descriptor_alloc(gadget); - if (!usb_desc) + if (!usb_desc) { + status = -ENOMEM; goto fail_string_ids; + } usb_otg_descriptor_init(gadget, usb_desc); otg_desc[0] = usb_desc; otg_desc[1] = NULL; diff --git a/drivers/usb/gadget/legacy/ether.c b/drivers/usb/gadget/legacy/ether.c index 30313b233680..99c7fc0d1d59 100644 --- a/drivers/usb/gadget/legacy/ether.c +++ b/drivers/usb/gadget/legacy/ether.c @@ -403,8 +403,10 @@ static int eth_bind(struct usb_composite_dev *cdev) struct usb_descriptor_header *usb_desc; usb_desc = usb_otg_descriptor_alloc(gadget); - if (!usb_desc) + if (!usb_desc) { + status = -ENOMEM; goto fail1; + } usb_otg_descriptor_init(gadget, usb_desc); otg_desc[0] = usb_desc; otg_desc[1] = NULL; diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 1a12aab208b4..8c614bb86c66 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -90,7 +90,7 @@ config USB_BCM63XX_UDC config USB_FSL_USB2 tristate "Freescale Highspeed USB DR Peripheral Controller" - depends on FSL_SOC || ARCH_MXC + depends on FSL_SOC help Some of Freescale PowerPC and i.MX processors have a High Speed Dual-Role(DR) USB controller, which supports device mode. diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile index f5a7ce28aecd..a21f2224e7eb 100644 --- a/drivers/usb/gadget/udc/Makefile +++ b/drivers/usb/gadget/udc/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o obj-$(CONFIG_USB_BCM63XX_UDC) += bcm63xx_udc.o obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o fsl_usb2_udc-y := fsl_udc_core.o -fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o obj-$(CONFIG_USB_TEGRA_XUDC) += tegra-xudc.o obj-$(CONFIG_USB_M66592) += m66592-udc.o obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c index 0bd6b20435b8..02d8bfae58fb 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c @@ -420,7 +420,10 @@ static void ast_vhub_stop_active_req(struct ast_vhub_ep *ep, u32 state, reg, loops; /* Stop DMA activity */ - writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + if (ep->epn.desc_mode) + writel(VHUB_EP_DMA_CTRL_RESET, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + else + writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); /* Wait for it to complete */ for (loops = 0; loops < 1000; loops++) { diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c index 6497185ec4e7..bfd8e77788e2 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c @@ -999,8 +999,10 @@ static int ast_vhub_of_parse_str_desc(struct ast_vhub *vhub, str_array[offset].s = NULL; ret = ast_vhub_str_alloc_add(vhub, &lang_str); - if (ret) + if (ret) { + of_node_put(child); break; + } } return ret; diff --git a/drivers/usb/gadget/udc/bdc/Kconfig b/drivers/usb/gadget/udc/bdc/Kconfig index 3e88c7670b2e..fb01ff47b64c 100644 --- a/drivers/usb/gadget/udc/bdc/Kconfig +++ b/drivers/usb/gadget/udc/bdc/Kconfig @@ -17,7 +17,7 @@ if USB_BDC_UDC comment "Platform Support" config USB_BDC_PCI tristate "BDC support for PCIe based platforms" - depends on USB_PCI + depends on USB_PCI && BROKEN default USB_BDC_UDC help Enable support for platforms which have BDC connected through PCIe, such as Lego3 FPGA platform. diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 5b5cfeb6c14a..ea114f922ccf 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -659,8 +659,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_vbus_disconnect); * * Enables the D+ (or potentially D-) pullup. The host will start * enumerating this gadget when the pullup is active and a VBUS session - * is active (the link is powered). This pullup is always enabled unless - * usb_gadget_disconnect() has been used to disable it. + * is active (the link is powered). * * Returns zero on success, else negative errno. */ @@ -1530,10 +1529,13 @@ static ssize_t soft_connect_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { struct usb_udc *udc = container_of(dev, struct usb_udc, dev); + ssize_t ret; + mutex_lock(&udc_lock); if (!udc->driver) { dev_err(dev, "soft-connect without a gadget driver\n"); - return -EOPNOTSUPP; + ret = -EOPNOTSUPP; + goto out; } if (sysfs_streq(buf, "connect")) { @@ -1544,10 +1546,14 @@ static ssize_t soft_connect_store(struct device *dev, usb_gadget_udc_stop(udc); } else { dev_err(dev, "unsupported command '%s'\n", buf); - return -EINVAL; + ret = -EINVAL; + goto out; } - return n; + ret = n; +out: + mutex_unlock(&udc_lock); + return ret; } static DEVICE_ATTR_WO(soft_connect); diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index ab5e978b5052..57067763b100 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -2118,9 +2118,21 @@ static int dummy_hub_control( dum_hcd->port_status &= ~USB_PORT_STAT_POWER; set_link_state(dum_hcd); break; - default: + case USB_PORT_FEAT_ENABLE: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + /* Not allowed for USB-3 */ + if (hcd->speed == HCD_USB3) + goto error; + fallthrough; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: dum_hcd->port_status &= ~(1 << wValue); set_link_state(dum_hcd); + break; + default: + /* Disallow INDICATOR and C_OVER_CURRENT */ + goto error; } break; case GetHubDescriptor: @@ -2258,17 +2270,20 @@ static int dummy_hub_control( } fallthrough; case USB_PORT_FEAT_RESET: + if (!(dum_hcd->port_status & USB_PORT_STAT_CONNECTION)) + break; /* if it's already enabled, disable */ if (hcd->speed == HCD_USB3) { - dum_hcd->port_status = 0; dum_hcd->port_status = (USB_SS_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION | USB_PORT_STAT_RESET); - } else + } else { dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); + dum_hcd->port_status |= USB_PORT_STAT_RESET; + } /* * We want to reset device status. All but the * Self powered feature @@ -2280,19 +2295,19 @@ static int dummy_hub_control( * interval? Is it still 50msec as for HS? */ dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50); - fallthrough; - default: - if (hcd->speed == HCD_USB3) { - if ((dum_hcd->port_status & - USB_SS_PORT_STAT_POWER) != 0) { - dum_hcd->port_status |= (1 << wValue); - } - } else - if ((dum_hcd->port_status & - USB_PORT_STAT_POWER) != 0) { - dum_hcd->port_status |= (1 << wValue); - } set_link_state(dum_hcd); + break; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + /* Not allowed for USB-3, and ignored for USB-2 */ + if (hcd->speed == HCD_USB3) + goto error; + break; + default: + /* Disallow TEST, INDICATOR, and C_OVER_CURRENT */ + goto error; } break; case GetPortErrorCount: diff --git a/drivers/usb/gadget/udc/fsl_mxc_udc.c b/drivers/usb/gadget/udc/fsl_mxc_udc.c deleted file mode 100644 index 5a321992decc..000000000000 --- a/drivers/usb/gadget/udc/fsl_mxc_udc.c +++ /dev/null @@ -1,122 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2009 - * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> - * - * Description: - * Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c - * driver to function correctly on these systems. - */ -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/fsl_devices.h> -#include <linux/mod_devicetable.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include "fsl_usb2_udc.h" - -static struct clk *mxc_ahb_clk; -static struct clk *mxc_per_clk; -static struct clk *mxc_ipg_clk; - -/* workaround ENGcm09152 for i.MX35 */ -#define MX35_USBPHYCTRL_OFFSET 0x600 -#define USBPHYCTRL_OTGBASE_OFFSET 0x8 -#define USBPHYCTRL_EVDO (1 << 23) - -int fsl_udc_clk_init(struct platform_device *pdev) -{ - struct fsl_usb2_platform_data *pdata; - unsigned long freq; - int ret; - - pdata = dev_get_platdata(&pdev->dev); - - mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg"); - if (IS_ERR(mxc_ipg_clk)) { - dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n"); - return PTR_ERR(mxc_ipg_clk); - } - - mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb"); - if (IS_ERR(mxc_ahb_clk)) { - dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n"); - return PTR_ERR(mxc_ahb_clk); - } - - mxc_per_clk = devm_clk_get(&pdev->dev, "per"); - if (IS_ERR(mxc_per_clk)) { - dev_err(&pdev->dev, "clk_get(\"per\") failed\n"); - return PTR_ERR(mxc_per_clk); - } - - clk_prepare_enable(mxc_ipg_clk); - clk_prepare_enable(mxc_ahb_clk); - clk_prepare_enable(mxc_per_clk); - - /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ - if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) { - freq = clk_get_rate(mxc_per_clk); - if (pdata->phy_mode != FSL_USB2_PHY_ULPI && - (freq < 59999000 || freq > 60001000)) { - dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq); - ret = -EINVAL; - goto eclkrate; - } - } - - return 0; - -eclkrate: - clk_disable_unprepare(mxc_ipg_clk); - clk_disable_unprepare(mxc_ahb_clk); - clk_disable_unprepare(mxc_per_clk); - mxc_per_clk = NULL; - return ret; -} - -int fsl_udc_clk_finalize(struct platform_device *pdev) -{ - struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); - int ret = 0; - - /* workaround ENGcm09152 for i.MX35 */ - if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - unsigned int v; - struct resource *res = platform_get_resource - (pdev, IORESOURCE_MEM, 0); - void __iomem *phy_regs = ioremap(res->start + - MX35_USBPHYCTRL_OFFSET, 512); - if (!phy_regs) { - dev_err(&pdev->dev, "ioremap for phy address fails\n"); - ret = -EINVAL; - goto ioremap_err; - } - - v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET); - writel(v | USBPHYCTRL_EVDO, - phy_regs + USBPHYCTRL_OTGBASE_OFFSET); - - iounmap(phy_regs); - } - - -ioremap_err: - /* ULPI transceivers don't need usbpll */ - if (pdata->phy_mode == FSL_USB2_PHY_ULPI) { - clk_disable_unprepare(mxc_per_clk); - mxc_per_clk = NULL; - } - - return ret; -} - -void fsl_udc_clk_release(void) -{ - if (mxc_per_clk) - clk_disable_unprepare(mxc_per_clk); - clk_disable_unprepare(mxc_ahb_clk); - clk_disable_unprepare(mxc_ipg_clk); -} diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index e358ae17d51e..1926b328b6aa 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -574,6 +574,7 @@ static int ehci_run (struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 temp; u32 hcc_params; + int rc; hcd->uses_new_polling = 1; @@ -629,9 +630,20 @@ static int ehci_run (struct usb_hcd *hcd) down_write(&ehci_cf_port_reset_rwsem); ehci->rh_state = EHCI_RH_RUNNING; ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); + + /* Wait until HC become operational */ ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ msleep(5); + rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT, 0, 100 * 1000); + up_write(&ehci_cf_port_reset_rwsem); + + if (rc) { + ehci_err(ehci, "USB %x.%x, controller refused to start: %d\n", + ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), rc); + return rc; + } + ehci->last_periodic_enable = ktime_get_real(); temp = HC_VERSION(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 087402aec5cb..9f9ab5ccea88 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -345,6 +345,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) unlink_empty_async_suspended(ehci); + /* Some Synopsys controllers mistakenly leave IAA turned on */ + ehci_writel(ehci, STS_IAA, &ehci->regs->status); + /* Any IAA cycle that started before the suspend is now invalid */ end_iaa_cycle(ehci); ehci_handle_start_intr_unlinks(ehci); diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 45c54d56ecbd..b45e5bf08997 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -200,6 +200,8 @@ static struct mu3h_sch_ep_info *create_sch_ep(struct usb_device *udev, sch_ep->sch_tt = tt; sch_ep->ep = ep; + INIT_LIST_HEAD(&sch_ep->endpoint); + INIT_LIST_HEAD(&sch_ep->tt_endpoint); return sch_ep; } @@ -373,6 +375,7 @@ static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw, sch_ep->bw_budget_table[j]; } } + sch_ep->allocated = used; } static int check_sch_tt(struct usb_device *udev, @@ -541,6 +544,22 @@ static int check_sch_bw(struct usb_device *udev, return 0; } +static void destroy_sch_ep(struct usb_device *udev, + struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep) +{ + /* only release ep bw check passed by check_sch_bw() */ + if (sch_ep->allocated) + update_bus_bw(sch_bw, sch_ep, 0); + + list_del(&sch_ep->endpoint); + + if (sch_ep->sch_tt) { + list_del(&sch_ep->tt_endpoint); + drop_tt(udev); + } + kfree(sch_ep); +} + static bool need_bw_sch(struct usb_host_endpoint *ep, enum usb_device_speed speed, int has_tt) { @@ -583,6 +602,8 @@ int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk) mtk->sch_array = sch_array; + INIT_LIST_HEAD(&mtk->bw_ep_chk_list); + return 0; } EXPORT_SYMBOL_GPL(xhci_mtk_sch_init); @@ -601,19 +622,14 @@ int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, struct xhci_ep_ctx *ep_ctx; struct xhci_slot_ctx *slot_ctx; struct xhci_virt_device *virt_dev; - struct mu3h_sch_bw_info *sch_bw; struct mu3h_sch_ep_info *sch_ep; - struct mu3h_sch_bw_info *sch_array; unsigned int ep_index; - int bw_index; - int ret = 0; xhci = hcd_to_xhci(hcd); virt_dev = xhci->devs[udev->slot_id]; ep_index = xhci_get_endpoint_index(&ep->desc); slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); - sch_array = mtk->sch_array; xhci_dbg(xhci, "%s() type:%d, speed:%d, mpkt:%d, dir:%d, ep:%p\n", __func__, usb_endpoint_type(&ep->desc), udev->speed, @@ -632,35 +648,13 @@ int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, return 0; } - bw_index = get_bw_index(xhci, udev, ep); - sch_bw = &sch_array[bw_index]; - sch_ep = create_sch_ep(udev, ep, ep_ctx); if (IS_ERR_OR_NULL(sch_ep)) return -ENOMEM; setup_sch_info(udev, ep_ctx, sch_ep); - ret = check_sch_bw(udev, sch_bw, sch_ep); - if (ret) { - xhci_err(xhci, "Not enough bandwidth!\n"); - if (is_fs_or_ls(udev->speed)) - drop_tt(udev); - - kfree(sch_ep); - return -ENOSPC; - } - - list_add_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list); - - ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(sch_ep->pkts) - | EP_BCSCOUNT(sch_ep->cs_count) | EP_BBM(sch_ep->burst_mode)); - ep_ctx->reserved[1] |= cpu_to_le32(EP_BOFFSET(sch_ep->offset) - | EP_BREPEAT(sch_ep->repeat)); - - xhci_dbg(xhci, " PKTS:%x, CSCOUNT:%x, BM:%x, OFFSET:%x, REPEAT:%x\n", - sch_ep->pkts, sch_ep->cs_count, sch_ep->burst_mode, - sch_ep->offset, sch_ep->repeat); + list_add_tail(&sch_ep->endpoint, &mtk->bw_ep_chk_list); return 0; } @@ -675,7 +669,7 @@ void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, struct xhci_virt_device *virt_dev; struct mu3h_sch_bw_info *sch_array; struct mu3h_sch_bw_info *sch_bw; - struct mu3h_sch_ep_info *sch_ep; + struct mu3h_sch_ep_info *sch_ep, *tmp; int bw_index; xhci = hcd_to_xhci(hcd); @@ -694,17 +688,79 @@ void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, bw_index = get_bw_index(xhci, udev, ep); sch_bw = &sch_array[bw_index]; - list_for_each_entry(sch_ep, &sch_bw->bw_ep_list, endpoint) { + list_for_each_entry_safe(sch_ep, tmp, &sch_bw->bw_ep_list, endpoint) { if (sch_ep->ep == ep) { - update_bus_bw(sch_bw, sch_ep, 0); - list_del(&sch_ep->endpoint); - if (is_fs_or_ls(udev->speed)) { - list_del(&sch_ep->tt_endpoint); - drop_tt(udev); - } - kfree(sch_ep); + destroy_sch_ep(udev, sch_bw, sch_ep); break; } } } EXPORT_SYMBOL_GPL(xhci_mtk_drop_ep_quirk); + +int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) +{ + struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd); + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id]; + struct mu3h_sch_bw_info *sch_bw; + struct mu3h_sch_ep_info *sch_ep, *tmp; + int bw_index, ret; + + xhci_dbg(xhci, "%s() udev %s\n", __func__, dev_name(&udev->dev)); + + list_for_each_entry(sch_ep, &mtk->bw_ep_chk_list, endpoint) { + bw_index = get_bw_index(xhci, udev, sch_ep->ep); + sch_bw = &mtk->sch_array[bw_index]; + + ret = check_sch_bw(udev, sch_bw, sch_ep); + if (ret) { + xhci_err(xhci, "Not enough bandwidth!\n"); + return -ENOSPC; + } + } + + list_for_each_entry_safe(sch_ep, tmp, &mtk->bw_ep_chk_list, endpoint) { + struct xhci_ep_ctx *ep_ctx; + struct usb_host_endpoint *ep = sch_ep->ep; + unsigned int ep_index = xhci_get_endpoint_index(&ep->desc); + + bw_index = get_bw_index(xhci, udev, ep); + sch_bw = &mtk->sch_array[bw_index]; + + list_move_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list); + + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); + ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(sch_ep->pkts) + | EP_BCSCOUNT(sch_ep->cs_count) + | EP_BBM(sch_ep->burst_mode)); + ep_ctx->reserved[1] |= cpu_to_le32(EP_BOFFSET(sch_ep->offset) + | EP_BREPEAT(sch_ep->repeat)); + + xhci_dbg(xhci, " PKTS:%x, CSCOUNT:%x, BM:%x, OFFSET:%x, REPEAT:%x\n", + sch_ep->pkts, sch_ep->cs_count, sch_ep->burst_mode, + sch_ep->offset, sch_ep->repeat); + } + + return xhci_check_bandwidth(hcd, udev); +} +EXPORT_SYMBOL_GPL(xhci_mtk_check_bandwidth); + +void xhci_mtk_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) +{ + struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd); + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct mu3h_sch_bw_info *sch_bw; + struct mu3h_sch_ep_info *sch_ep, *tmp; + int bw_index; + + xhci_dbg(xhci, "%s() udev %s\n", __func__, dev_name(&udev->dev)); + + list_for_each_entry_safe(sch_ep, tmp, &mtk->bw_ep_chk_list, endpoint) { + bw_index = get_bw_index(xhci, udev, sch_ep->ep); + sch_bw = &mtk->sch_array[bw_index]; + destroy_sch_ep(udev, sch_bw, sch_ep); + } + + xhci_reset_bandwidth(hcd, udev); +} +EXPORT_SYMBOL_GPL(xhci_mtk_reset_bandwidth); diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index 8f321f39ab96..fe010cc61f19 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -347,6 +347,8 @@ static void usb_wakeup_set(struct xhci_hcd_mtk *mtk, bool enable) static int xhci_mtk_setup(struct usb_hcd *hcd); static const struct xhci_driver_overrides xhci_mtk_overrides __initconst = { .reset = xhci_mtk_setup, + .check_bandwidth = xhci_mtk_check_bandwidth, + .reset_bandwidth = xhci_mtk_reset_bandwidth, }; static struct hc_driver __read_mostly xhci_mtk_hc_driver; diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h index a93cfe817904..cbb09dfea62e 100644 --- a/drivers/usb/host/xhci-mtk.h +++ b/drivers/usb/host/xhci-mtk.h @@ -59,6 +59,7 @@ struct mu3h_sch_bw_info { * @ep_type: endpoint type * @maxpkt: max packet size of endpoint * @ep: address of usb_host_endpoint struct + * @allocated: the bandwidth is aready allocated from bus_bw * @offset: which uframe of the interval that transfer should be * scheduled first time within the interval * @repeat: the time gap between two uframes that transfers are @@ -86,6 +87,7 @@ struct mu3h_sch_ep_info { u32 ep_type; u32 maxpkt; void *ep; + bool allocated; /* * mtk xHCI scheduling information put into reserved DWs * in ep context @@ -131,6 +133,7 @@ struct xhci_hcd_mtk { struct device *dev; struct usb_hcd *hcd; struct mu3h_sch_bw_info *sch_array; + struct list_head bw_ep_chk_list; struct mu3c_ippc_regs __iomem *ippc_regs; bool has_ippc; int num_u2_ports; @@ -166,6 +169,8 @@ int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); +int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); +void xhci_mtk_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); #else static inline int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, @@ -179,6 +184,16 @@ static inline void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, { } +static inline int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, + struct usb_device *udev) +{ + return 0; +} + +static inline void xhci_mtk_reset_bandwidth(struct usb_hcd *hcd, + struct usb_device *udev) +{ +} #endif #endif /* _XHCI_MTK_H_ */ diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c index 60651a50770f..8ca1a235d164 100644 --- a/drivers/usb/host/xhci-mvebu.c +++ b/drivers/usb/host/xhci-mvebu.c @@ -8,6 +8,7 @@ #include <linux/mbus.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/phy/phy.h> #include <linux/usb.h> #include <linux/usb/hcd.h> @@ -74,6 +75,47 @@ int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) return 0; } +int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct device *dev = hcd->self.controller; + struct phy *phy; + int ret; + + /* Old bindings miss the PHY handle */ + phy = of_phy_get(dev->of_node, "usb3-phy"); + if (IS_ERR(phy) && PTR_ERR(phy) == -EPROBE_DEFER) + return -EPROBE_DEFER; + else if (IS_ERR(phy)) + goto phy_out; + + ret = phy_init(phy); + if (ret) + goto phy_put; + + ret = phy_set_mode(phy, PHY_MODE_USB_HOST_SS); + if (ret) + goto phy_exit; + + ret = phy_power_on(phy); + if (ret == -EOPNOTSUPP) { + /* Skip initializatin of XHCI PHY when it is unsupported by firmware */ + dev_warn(dev, "PHY unsupported by firmware\n"); + xhci->quirks |= XHCI_SKIP_PHY_INIT; + } + if (ret) + goto phy_exit; + + phy_power_off(phy); +phy_exit: + phy_exit(phy); +phy_put: + of_phy_put(phy); +phy_out: + + return 0; +} + int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h index 3be021793cc8..01bf3fcb3eca 100644 --- a/drivers/usb/host/xhci-mvebu.h +++ b/drivers/usb/host/xhci-mvebu.h @@ -12,6 +12,7 @@ struct usb_hcd; #if IS_ENABLED(CONFIG_USB_XHCI_MVEBU) int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd); +int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd); int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd); #else static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) @@ -19,6 +20,11 @@ static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) return 0; } +static inline int xhci_mvebu_a3700_plat_setup(struct usb_hcd *hcd) +{ + return 0; +} + static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) { return 0; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 4d34f6005381..c1edcc9b13ce 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -44,6 +44,16 @@ static void xhci_priv_plat_start(struct usb_hcd *hcd) priv->plat_start(hcd); } +static int xhci_priv_plat_setup(struct usb_hcd *hcd) +{ + struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); + + if (!priv->plat_setup) + return 0; + + return priv->plat_setup(hcd); +} + static int xhci_priv_init_quirk(struct usb_hcd *hcd) { struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); @@ -111,6 +121,7 @@ static const struct xhci_plat_priv xhci_plat_marvell_armada = { }; static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = { + .plat_setup = xhci_mvebu_a3700_plat_setup, .init_quirk = xhci_mvebu_a3700_init_quirk, }; @@ -330,7 +341,14 @@ static int xhci_plat_probe(struct platform_device *pdev) hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node); xhci->shared_hcd->tpl_support = hcd->tpl_support; - if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT)) + + if (priv) { + ret = xhci_priv_plat_setup(hcd); + if (ret) + goto disable_usb_phy; + } + + if ((xhci->quirks & XHCI_SKIP_PHY_INIT) || (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))) hcd->skip_phy_initialization = 1; if (priv && (priv->quirks & XHCI_SG_TRB_CACHE_SIZE_QUIRK)) diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h index 1fb149d1fbce..561d0b7bce09 100644 --- a/drivers/usb/host/xhci-plat.h +++ b/drivers/usb/host/xhci-plat.h @@ -13,6 +13,7 @@ struct xhci_plat_priv { const char *firmware_name; unsigned long long quirks; + int (*plat_setup)(struct usb_hcd *); void (*plat_start)(struct usb_hcd *); int (*init_quirk)(struct usb_hcd *); int (*suspend_quirk)(struct usb_hcd *); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 5677b81c0915..89c3be9917f6 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -699,11 +699,16 @@ static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci, dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len, DMA_FROM_DEVICE); /* for in tranfers we need to copy the data from bounce to sg */ - len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf, - seg->bounce_len, seg->bounce_offs); - if (len != seg->bounce_len) - xhci_warn(xhci, "WARN Wrong bounce buffer read length: %zu != %d\n", - len, seg->bounce_len); + if (urb->num_sgs) { + len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf, + seg->bounce_len, seg->bounce_offs); + if (len != seg->bounce_len) + xhci_warn(xhci, "WARN Wrong bounce buffer read length: %zu != %d\n", + len, seg->bounce_len); + } else { + memcpy(urb->transfer_buffer + seg->bounce_offs, seg->bounce_buf, + seg->bounce_len); + } seg->bounce_len = 0; seg->bounce_offs = 0; } @@ -2931,6 +2936,8 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring, trb->field[0] = cpu_to_le32(field1); trb->field[1] = cpu_to_le32(field2); trb->field[2] = cpu_to_le32(field3); + /* make sure TRB is fully written before giving it to the controller */ + wmb(); trb->field[3] = cpu_to_le32(field4); trace_xhci_queue_trb(ring, trb); @@ -3275,12 +3282,16 @@ static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len, /* create a max max_pkt sized bounce buffer pointed to by last trb */ if (usb_urb_dir_out(urb)) { - len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs, - seg->bounce_buf, new_buff_len, enqd_len); - if (len != new_buff_len) - xhci_warn(xhci, - "WARN Wrong bounce buffer write length: %zu != %d\n", - len, new_buff_len); + if (urb->num_sgs) { + len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs, + seg->bounce_buf, new_buff_len, enqd_len); + if (len != new_buff_len) + xhci_warn(xhci, "WARN Wrong bounce buffer write length: %zu != %d\n", + len, new_buff_len); + } else { + memcpy(seg->bounce_buf, urb->transfer_buffer + enqd_len, new_buff_len); + } + seg->bounce_dma = dma_map_single(dev, seg->bounce_buf, max_pkt, DMA_TO_DEVICE); } else { diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 934be1686352..50bb91b6a4b8 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -623,6 +623,13 @@ static void tegra_xusb_mbox_handle(struct tegra_xusb *tegra, enable); if (err < 0) break; + + /* + * wait 500us for LFPS detector to be disabled before + * sending ACK + */ + if (!enable) + usleep_range(500, 1000); } if (err < 0) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 91ab81c3fc79..345a221028c6 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2985,7 +2985,7 @@ static void xhci_check_bw_drop_ep_streams(struct xhci_hcd *xhci, * else should be touching the xhci->devs[slot_id] structure, so we * don't need to take the xhci->lock for manipulating that. */ -static int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) +int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) { int i; int ret = 0; @@ -3083,7 +3083,7 @@ command_cleanup: return ret; } -static void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) +void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) { struct xhci_hcd *xhci; struct xhci_virt_device *virt_dev; @@ -4770,19 +4770,19 @@ static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci, { unsigned long long timeout_ns; + if (xhci->quirks & XHCI_INTEL_HOST) + timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc); + else + timeout_ns = udev->u1_params.sel; + /* Prevent U1 if service interval is shorter than U1 exit latency */ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) { - if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) { + if (xhci_service_interval_to_ns(desc) <= timeout_ns) { dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n"); return USB3_LPM_DISABLED; } } - if (xhci->quirks & XHCI_INTEL_HOST) - timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc); - else - timeout_ns = udev->u1_params.sel; - /* The U1 timeout is encoded in 1us intervals. * Don't return a timeout of zero, because that's USB3_LPM_DISABLED. */ @@ -4834,19 +4834,19 @@ static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci, { unsigned long long timeout_ns; + if (xhci->quirks & XHCI_INTEL_HOST) + timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc); + else + timeout_ns = udev->u2_params.sel; + /* Prevent U2 if service interval is shorter than U2 exit latency */ if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) { - if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) { + if (xhci_service_interval_to_ns(desc) <= timeout_ns) { dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n"); return USB3_LPM_DISABLED; } } - if (xhci->quirks & XHCI_INTEL_HOST) - timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc); - else - timeout_ns = udev->u2_params.sel; - /* The U2 timeout is encoded in 256us intervals */ timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000); /* If the necessary timeout value is bigger than what we can set in the @@ -5510,6 +5510,10 @@ void xhci_init_driver(struct hc_driver *drv, drv->reset = over->reset; if (over->start) drv->start = over->start; + if (over->check_bandwidth) + drv->check_bandwidth = over->check_bandwidth; + if (over->reset_bandwidth) + drv->reset_bandwidth = over->reset_bandwidth; } } EXPORT_SYMBOL_GPL(xhci_init_driver); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 25e57bc9c3cc..07ff95016f11 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1920,6 +1920,8 @@ struct xhci_driver_overrides { size_t extra_priv_size; int (*reset)(struct usb_hcd *hcd); int (*start)(struct usb_hcd *hcd); + int (*check_bandwidth)(struct usb_hcd *, struct usb_device *); + void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); }; #define XHCI_CFC_DELAY 10 @@ -2074,6 +2076,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks); void xhci_shutdown(struct usb_hcd *hcd); void xhci_init_driver(struct hc_driver *drv, const struct xhci_driver_overrides *over); +int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); +void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id); int xhci_ext_cap_init(struct xhci_hcd *xhci); diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 73ebfa6e9715..c640f98d20c5 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -496,6 +496,9 @@ static ssize_t yurex_write(struct file *file, const char __user *user_buffer, timeout = schedule_timeout(YUREX_WRITE_TIMEOUT); finish_wait(&dev->waitq, &wait); + /* make sure URB is idle after timeout or (spurious) CMD_ACK */ + usb_kill_urb(dev->cntl_urb); + mutex_unlock(&dev->io_mutex); if (retval < 0) { diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index ac9a81ae8216..e6fa13701808 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -126,6 +126,7 @@ struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt) } usbhs_pipe_clear_without_sequence(pipe, 0, 0); + usbhs_pipe_running(pipe, 0); __usbhsf_pkt_del(pkt); } diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index fbb10dfc56e3..7bec1e730b20 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -61,6 +61,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */ { USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */ + { USB_DEVICE(0x0988, 0x0578) }, /* Teraoka AD2000 */ { USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */ { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */ { USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */ @@ -201,6 +202,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1901, 0x0194) }, /* GE Healthcare Remote Alarm Box */ { USB_DEVICE(0x1901, 0x0195) }, /* GE B850/B650/B450 CP2104 DP UART interface */ { USB_DEVICE(0x1901, 0x0196) }, /* GE B850 CP2105 DP UART interface */ + { USB_DEVICE(0x199B, 0xBA30) }, /* LORD WSDA-200-USB */ { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */ diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index f1201d4de297..e8f06b41a503 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -532,23 +532,29 @@ static int iuu_uart_flush(struct usb_serial_port *port) struct device *dev = &port->dev; int i; int status; - u8 rxcmd = IUU_UART_RX; + u8 *rxcmd; struct iuu_private *priv = usb_get_serial_port_data(port); if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0) return -EIO; + rxcmd = kmalloc(1, GFP_KERNEL); + if (!rxcmd) + return -ENOMEM; + + rxcmd[0] = IUU_UART_RX; + for (i = 0; i < 2; i++) { - status = bulk_immediate(port, &rxcmd, 1); + status = bulk_immediate(port, rxcmd, 1); if (status != IUU_OPERATION_OK) { dev_dbg(dev, "%s - uart_flush_write error\n", __func__); - return status; + goto out_free; } status = read_immediate(port, &priv->len, 1); if (status != IUU_OPERATION_OK) { dev_dbg(dev, "%s - uart_flush_read error\n", __func__); - return status; + goto out_free; } if (priv->len > 0) { @@ -556,12 +562,16 @@ static int iuu_uart_flush(struct usb_serial_port *port) status = read_immediate(port, priv->buf, priv->len); if (status != IUU_OPERATION_OK) { dev_dbg(dev, "%s - uart_flush_read error\n", __func__); - return status; + goto out_free; } } } dev_dbg(dev, "%s - uart_flush_read OK!\n", __func__); iuu_led(port, 0, 0xF000, 0, 0xFF); + +out_free: + kfree(rxcmd); + return status; } diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2c21e34235bb..2049e66f34a3 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -425,6 +425,8 @@ static void option_instat_callback(struct urb *urb); #define CINTERION_PRODUCT_AHXX_2RMNET 0x0084 #define CINTERION_PRODUCT_AHXX_AUDIO 0x0085 #define CINTERION_PRODUCT_CLS8 0x00b0 +#define CINTERION_PRODUCT_MV31_MBIM 0x00b3 +#define CINTERION_PRODUCT_MV31_RMNET 0x00b7 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -1117,6 +1119,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0xff, 0x30) }, /* EM160R-GL */ + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), @@ -1912,6 +1916,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) }, { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */ { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_MBIM, 0xff), + .driver_info = RSVD(3)}, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_RMNET, 0xff), + .driver_info = RSVD(0)}, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100), .driver_info = RSVD(4) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120), @@ -2057,6 +2065,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */ .driver_info = RSVD(6) }, { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */ diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 870e9cf3d5dc..f9677a5ec31b 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -91,6 +91,13 @@ UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x9999, US_FL_BROKEN_FUA), /* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */ +UNUSUAL_DEV(0x154b, 0xf00b, 0x0000, 0x9999, + "PNY", + "Pro Elite SSD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + +/* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */ UNUSUAL_DEV(0x154b, 0xf00d, 0x0000, 0x9999, "PNY", "Pro Elite SSD", diff --git a/drivers/usb/typec/altmodes/Kconfig b/drivers/usb/typec/altmodes/Kconfig index 187690fd1a5b..60d375e9c3c7 100644 --- a/drivers/usb/typec/altmodes/Kconfig +++ b/drivers/usb/typec/altmodes/Kconfig @@ -20,6 +20,6 @@ config TYPEC_NVIDIA_ALTMODE to enable support for VirtualLink devices with NVIDIA GPUs. To compile this driver as a module, choose M here: the - module will be called typec_displayport. + module will be called typec_nvidia. endmenu diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index ebfd3113a9a8..8f77669f9cf4 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -766,6 +766,7 @@ int typec_partner_set_num_altmodes(struct typec_partner *partner, int num_altmod return ret; sysfs_notify(&partner->dev.kobj, NULL, "number_of_alternate_modes"); + kobject_uevent(&partner->dev.kobj, KOBJ_CHANGE); return 0; } @@ -923,6 +924,7 @@ int typec_plug_set_num_altmodes(struct typec_plug *plug, int num_altmodes) return ret; sysfs_notify(&plug->dev.kobj, NULL, "number_of_alternate_modes"); + kobject_uevent(&plug->dev.kobj, KOBJ_CHANGE); return 0; } diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c index cf37a59ce130..46a25b8db72e 100644 --- a/drivers/usb/typec/mux/intel_pmc_mux.c +++ b/drivers/usb/typec/mux/intel_pmc_mux.c @@ -207,10 +207,21 @@ static int pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_displayport_data *dp) { u8 msg[2] = { }; + int ret; msg[0] = PMC_USB_DP_HPD; msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT; + /* Configure HPD first if HPD,IRQ comes together */ + if (!IOM_PORT_HPD_ASSERTED(port->iom_status) && + dp->status & DP_STATUS_IRQ_HPD && + dp->status & DP_STATUS_HPD_STATE) { + msg[1] = PMC_USB_DP_HPD_LVL; + ret = pmc_usb_command(port, msg, sizeof(msg)); + if (ret) + return ret; + } + if (dp->status & DP_STATUS_IRQ_HPD) msg[1] = PMC_USB_DP_HPD_IRQ; diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 66cde5e5f796..3209b5ddd30c 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -396,6 +396,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, default: usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n", wValue); + if (wValue >= 32) + goto error; vhci_hcd->port_status[rhport] &= ~(1 << wValue); break; } |