diff options
Diffstat (limited to 'drivers/vme')
| -rw-r--r-- | drivers/vme/Kconfig | 16 | ||||
| -rw-r--r-- | drivers/vme/Makefile | 7 | ||||
| -rw-r--r-- | drivers/vme/bridges/Kconfig | 17 | ||||
| -rw-r--r-- | drivers/vme/bridges/Makefile | 3 | ||||
| -rw-r--r-- | drivers/vme/bridges/vme_fake.c | 1305 | ||||
| -rw-r--r-- | drivers/vme/bridges/vme_tsi148.c | 2661 | ||||
| -rw-r--r-- | drivers/vme/bridges/vme_tsi148.h | 1407 | ||||
| -rw-r--r-- | drivers/vme/vme.c | 2015 | ||||
| -rw-r--r-- | drivers/vme/vme_bridge.h | 190 |
9 files changed, 0 insertions, 7621 deletions
diff --git a/drivers/vme/Kconfig b/drivers/vme/Kconfig deleted file mode 100644 index 26feabba19d2..000000000000 --- a/drivers/vme/Kconfig +++ /dev/null @@ -1,16 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# VME configuration. -# - -menuconfig VME_BUS - bool "VME bridge support" - depends on PCI - help - If you say Y here you get support for the VME bridge Framework. - -if VME_BUS - -source "drivers/vme/bridges/Kconfig" - -endif # VME diff --git a/drivers/vme/Makefile b/drivers/vme/Makefile deleted file mode 100644 index 2dfb929a23de..000000000000 --- a/drivers/vme/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for the VME bridge device drivers. -# -obj-$(CONFIG_VME_BUS) += vme.o - -obj-y += bridges/ diff --git a/drivers/vme/bridges/Kconfig b/drivers/vme/bridges/Kconfig deleted file mode 100644 index 9493b22b5276..000000000000 --- a/drivers/vme/bridges/Kconfig +++ /dev/null @@ -1,17 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -comment "VME Bridge Drivers" - -config VME_TSI148 - tristate "Tempe" - depends on HAS_DMA - help - If you say Y here you get support for the Tundra TSI148 VME bridge - chip. - -config VME_FAKE - tristate "Fake" - help - If you say Y here you get support for the fake VME bridge. This - provides a virtualised VME Bus for devices with no VME bridge. This - is mainly useful for VME development (in the absence of VME - hardware). diff --git a/drivers/vme/bridges/Makefile b/drivers/vme/bridges/Makefile deleted file mode 100644 index 043f9cd7a510..000000000000 --- a/drivers/vme/bridges/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_VME_TSI148) += vme_tsi148.o -obj-$(CONFIG_VME_FAKE) += vme_fake.o diff --git a/drivers/vme/bridges/vme_fake.c b/drivers/vme/bridges/vme_fake.c deleted file mode 100644 index 6a1bc284f297..000000000000 --- a/drivers/vme/bridges/vme_fake.c +++ /dev/null @@ -1,1305 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Fake VME bridge support. - * - * This drive provides a fake VME bridge chip, this enables debugging of the - * VME framework in the absence of a VME system. - * - * This driver has to do a number of things in software that would be driven - * by hardware if it was available, it will also result in extra overhead at - * times when compared with driving actual hardware. - * - * Author: Martyn Welch <martyn@welches.me.uk> - * Copyright (c) 2014 Martyn Welch - * - * Based on vme_tsi148.c: - * - * Author: Martyn Welch <martyn.welch@ge.com> - * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. - * - * Based on work by Tom Armistead and Ajit Prem - * Copyright 2004 Motorola Inc. - */ - -#include <linux/device.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <linux/types.h> -#include <linux/vme.h> - -#include "../vme_bridge.h" - -/* - * Define the number of each that the fake driver supports. - */ -#define FAKE_MAX_MASTER 8 /* Max Master Windows */ -#define FAKE_MAX_SLAVE 8 /* Max Slave Windows */ - -/* Structures to hold information normally held in device registers */ -struct fake_slave_window { - int enabled; - unsigned long long vme_base; - unsigned long long size; - void *buf_base; - u32 aspace; - u32 cycle; -}; - -struct fake_master_window { - int enabled; - unsigned long long vme_base; - unsigned long long size; - u32 aspace; - u32 cycle; - u32 dwidth; -}; - -/* Structure used to hold driver specific information */ -struct fake_driver { - struct vme_bridge *parent; - struct fake_slave_window slaves[FAKE_MAX_SLAVE]; - struct fake_master_window masters[FAKE_MAX_MASTER]; - u32 lm_enabled; - unsigned long long lm_base; - u32 lm_aspace; - u32 lm_cycle; - void (*lm_callback[4])(void *); - void *lm_data[4]; - struct tasklet_struct int_tasklet; - int int_level; - int int_statid; - void *crcsr_kernel; - dma_addr_t crcsr_bus; - /* Only one VME interrupt can be generated at a time, provide locking */ - struct mutex vme_int; -}; - -/* Module parameter */ -static int geoid; - -static const char driver_name[] = "vme_fake"; - -static struct vme_bridge *exit_pointer; - -static struct device *vme_root; - -/* - * Calling VME bus interrupt callback if provided. - */ -static void fake_VIRQ_tasklet(unsigned long data) -{ - struct vme_bridge *fake_bridge; - struct fake_driver *bridge; - - fake_bridge = (struct vme_bridge *) data; - bridge = fake_bridge->driver_priv; - - vme_irq_handler(fake_bridge, bridge->int_level, bridge->int_statid); -} - -/* - * Configure VME interrupt - */ -static void fake_irq_set(struct vme_bridge *fake_bridge, int level, - int state, int sync) -{ - /* Nothing to do */ -} - -static void *fake_pci_to_ptr(dma_addr_t addr) -{ - return (void *)(uintptr_t)addr; -} - -static dma_addr_t fake_ptr_to_pci(void *addr) -{ - return (dma_addr_t)(uintptr_t)addr; -} - -/* - * Generate a VME bus interrupt at the requested level & vector. Wait for - * interrupt to be acked. - */ -static int fake_irq_generate(struct vme_bridge *fake_bridge, int level, - int statid) -{ - struct fake_driver *bridge; - - bridge = fake_bridge->driver_priv; - - mutex_lock(&bridge->vme_int); - - bridge->int_level = level; - - bridge->int_statid = statid; - - /* - * Schedule tasklet to run VME handler to emulate normal VME interrupt - * handler behaviour. - */ - tasklet_schedule(&bridge->int_tasklet); - - mutex_unlock(&bridge->vme_int); - - return 0; -} - -/* - * Initialize a slave window with the requested attributes. - */ -static int fake_slave_set(struct vme_slave_resource *image, int enabled, - unsigned long long vme_base, unsigned long long size, - dma_addr_t buf_base, u32 aspace, u32 cycle) -{ - unsigned int i, granularity = 0; - unsigned long long vme_bound; - struct vme_bridge *fake_bridge; - struct fake_driver *bridge; - - fake_bridge = image->parent; - bridge = fake_bridge->driver_priv; - - i = image->number; - - switch (aspace) { - case VME_A16: - granularity = 0x10; - break; - case VME_A24: - granularity = 0x1000; - break; - case VME_A32: - granularity = 0x10000; - break; - case VME_A64: - granularity = 0x10000; - break; - case VME_CRCSR: - case VME_USER1: - case VME_USER2: - case VME_USER3: - case VME_USER4: - default: - pr_err("Invalid address space\n"); - return -EINVAL; - } - - /* - * Bound address is a valid address for the window, adjust - * accordingly - */ - vme_bound = vme_base + size - granularity; - - if (vme_base & (granularity - 1)) { - pr_err("Invalid VME base alignment\n"); - return -EINVAL; - } - if (vme_bound & (granularity - 1)) { - pr_err("Invalid VME bound alignment\n"); - return -EINVAL; - } - - mutex_lock(&image->mtx); - - bridge->slaves[i].enabled = enabled; - bridge->slaves[i].vme_base = vme_base; - bridge->slaves[i].size = size; - bridge->slaves[i].buf_base = fake_pci_to_ptr(buf_base); - bridge->slaves[i].aspace = aspace; - bridge->slaves[i].cycle = cycle; - - mutex_unlock(&image->mtx); - - return 0; -} - -/* - * Get slave window configuration. - */ -static int fake_slave_get(struct vme_slave_resource *image, int *enabled, - unsigned long long *vme_base, unsigned long long *size, - dma_addr_t *buf_base, u32 *aspace, u32 *cycle) -{ - unsigned int i; - struct fake_driver *bridge; - - bridge = image->parent->driver_priv; - - i = image->number; - - mutex_lock(&image->mtx); - - *enabled = bridge->slaves[i].enabled; - *vme_base = bridge->slaves[i].vme_base; - *size = bridge->slaves[i].size; - *buf_base = fake_ptr_to_pci(bridge->slaves[i].buf_base); - *aspace = bridge->slaves[i].aspace; - *cycle = bridge->slaves[i].cycle; - - mutex_unlock(&image->mtx); - - return 0; -} - -/* - * Set the attributes of an outbound window. - */ -static int fake_master_set(struct vme_master_resource *image, int enabled, - unsigned long long vme_base, unsigned long long size, - u32 aspace, u32 cycle, u32 dwidth) -{ - int retval = 0; - unsigned int i; - struct vme_bridge *fake_bridge; - struct fake_driver *bridge; - - fake_bridge = image->parent; - - bridge = fake_bridge->driver_priv; - - /* Verify input data */ - if (vme_base & 0xFFFF) { - pr_err("Invalid VME Window alignment\n"); - retval = -EINVAL; - goto err_window; - } - - if (size & 0xFFFF) { - pr_err("Invalid size alignment\n"); - retval = -EINVAL; - goto err_window; - } - - if ((size == 0) && (enabled != 0)) { - pr_err("Size must be non-zero for enabled windows\n"); - retval = -EINVAL; - goto err_window; - } - - /* Setup data width */ - switch (dwidth) { - case VME_D8: - case VME_D16: - case VME_D32: - break; - default: - pr_err("Invalid data width\n"); - retval = -EINVAL; - goto err_dwidth; - } - - /* Setup address space */ - switch (aspace) { - case VME_A16: - case VME_A24: - case VME_A32: - case VME_A64: - case VME_CRCSR: - case VME_USER1: - case VME_USER2: - case VME_USER3: - case VME_USER4: - break; - default: - pr_err("Invalid address space\n"); - retval = -EINVAL; - goto err_aspace; - } - - spin_lock(&image->lock); - - i = image->number; - - bridge->masters[i].enabled = enabled; - bridge->masters[i].vme_base = vme_base; - bridge->masters[i].size = size; - bridge->masters[i].aspace = aspace; - bridge->masters[i].cycle = cycle; - bridge->masters[i].dwidth = dwidth; - - spin_unlock(&image->lock); - - return 0; - -err_aspace: -err_dwidth: -err_window: - return retval; - -} - -/* - * Set the attributes of an outbound window. - */ -static int __fake_master_get(struct vme_master_resource *image, int *enabled, - unsigned long long *vme_base, unsigned long long *size, - u32 *aspace, u32 *cycle, u32 *dwidth) -{ - unsigned int i; - struct fake_driver *bridge; - - bridge = image->parent->driver_priv; - - i = image->number; - - *enabled = bridge->masters[i].enabled; - *vme_base = bridge->masters[i].vme_base; - *size = bridge->masters[i].size; - *aspace = bridge->masters[i].aspace; - *cycle = bridge->masters[i].cycle; - *dwidth = bridge->masters[i].dwidth; - - return 0; -} - - -static int fake_master_get(struct vme_master_resource *image, int *enabled, - unsigned long long *vme_base, unsigned long long *size, - u32 *aspace, u32 *cycle, u32 *dwidth) -{ - int retval; - - spin_lock(&image->lock); - - retval = __fake_master_get(image, enabled, vme_base, size, aspace, - cycle, dwidth); - - spin_unlock(&image->lock); - - return retval; -} - - -static void fake_lm_check(struct fake_driver *bridge, unsigned long long addr, - u32 aspace, u32 cycle) -{ - struct vme_bridge *fake_bridge; - unsigned long long lm_base; - u32 lm_aspace, lm_cycle; - int i; - struct vme_lm_resource *lm; - struct list_head *pos = NULL, *n; - - /* Get vme_bridge */ - fake_bridge = bridge->parent; - - /* Loop through each location monitor resource */ - list_for_each_safe(pos, n, &fake_bridge->lm_resources) { - lm = list_entry(pos, struct vme_lm_resource, list); - - /* If disabled, we're done */ - if (bridge->lm_enabled == 0) - return; - - lm_base = bridge->lm_base; - lm_aspace = bridge->lm_aspace; - lm_cycle = bridge->lm_cycle; - - /* First make sure that the cycle and address space match */ - if ((lm_aspace == aspace) && (lm_cycle == cycle)) { - for (i = 0; i < lm->monitors; i++) { - /* Each location monitor covers 8 bytes */ - if (((lm_base + (8 * i)) <= addr) && - ((lm_base + (8 * i) + 8) > addr)) { - if (bridge->lm_callback[i]) - bridge->lm_callback[i]( - bridge->lm_data[i]); - } - } - } - } -} - -static noinline_for_stack u8 fake_vmeread8(struct fake_driver *bridge, - unsigned long long addr, - u32 aspace, u32 cycle) -{ - u8 retval = 0xff; - int i; - unsigned long long start, end, offset; - u8 *loc; - - for (i = 0; i < FAKE_MAX_SLAVE; i++) { - start = bridge->slaves[i].vme_base; - end = bridge->slaves[i].vme_base + bridge->slaves[i].size; - - if (aspace != bridge->slaves[i].aspace) - continue; - - if (cycle != bridge->slaves[i].cycle) - continue; - - if ((addr >= start) && (addr < end)) { - offset = addr - bridge->slaves[i].vme_base; - loc = (u8 *)(bridge->slaves[i].buf_base + offset); - retval = *loc; - - break; - } - } - - fake_lm_check(bridge, addr, aspace, cycle); - - return retval; -} - -static noinline_for_stack u16 fake_vmeread16(struct fake_driver *bridge, - unsigned long long addr, - u32 aspace, u32 cycle) -{ - u16 retval = 0xffff; - int i; - unsigned long long start, end, offset; - u16 *loc; - - for (i = 0; i < FAKE_MAX_SLAVE; i++) { - if (aspace != bridge->slaves[i].aspace) - continue; - - if (cycle != bridge->slaves[i].cycle) - continue; - - start = bridge->slaves[i].vme_base; - end = bridge->slaves[i].vme_base + bridge->slaves[i].size; - - if ((addr >= start) && ((addr + 1) < end)) { - offset = addr - bridge->slaves[i].vme_base; - loc = (u16 *)(bridge->slaves[i].buf_base + offset); - retval = *loc; - - break; - } - } - - fake_lm_check(bridge, addr, aspace, cycle); - - return retval; -} - -static noinline_for_stack u32 fake_vmeread32(struct fake_driver *bridge, - unsigned long long addr, - u32 aspace, u32 cycle) -{ - u32 retval = 0xffffffff; - int i; - unsigned long long start, end, offset; - u32 *loc; - - for (i = 0; i < FAKE_MAX_SLAVE; i++) { - if (aspace != bridge->slaves[i].aspace) - continue; - - if (cycle != bridge->slaves[i].cycle) - continue; - - start = bridge->slaves[i].vme_base; - end = bridge->slaves[i].vme_base + bridge->slaves[i].size; - - if ((addr >= start) && ((addr + 3) < end)) { - offset = addr - bridge->slaves[i].vme_base; - loc = (u32 *)(bridge->slaves[i].buf_base + offset); - retval = *loc; - - break; - } - } - - fake_lm_check(bridge, addr, aspace, cycle); - - return retval; -} - -static ssize_t fake_master_read(struct vme_master_resource *image, void *buf, - size_t count, loff_t offset) -{ - int retval; - u32 aspace, cycle, dwidth; - struct vme_bridge *fake_bridge; - struct fake_driver *priv; - int i; - unsigned long long addr; - unsigned int done = 0; - unsigned int count32; - - fake_bridge = image->parent; - - priv = fake_bridge->driver_priv; - - i = image->number; - - addr = (unsigned long long)priv->masters[i].vme_base + offset; - aspace = priv->masters[i].aspace; - cycle = priv->masters[i].cycle; - dwidth = priv->masters[i].dwidth; - - spin_lock(&image->lock); - - /* The following code handles VME address alignment. We cannot use - * memcpy_xxx here because it may cut data transfers in to 8-bit - * cycles when D16 or D32 cycles are required on the VME bus. - * On the other hand, the bridge itself assures that the maximum data - * cycle configured for the transfer is used and splits it - * automatically for non-aligned addresses, so we don't want the - * overhead of needlessly forcing small transfers for the entire cycle. - */ - if (addr & 0x1) { - *(u8 *)buf = fake_vmeread8(priv, addr, aspace, cycle); - done += 1; - if (done == count) - goto out; - } - if ((dwidth == VME_D16) || (dwidth == VME_D32)) { - if ((addr + done) & 0x2) { - if ((count - done) < 2) { - *(u8 *)(buf + done) = fake_vmeread8(priv, - addr + done, aspace, cycle); - done += 1; - goto out; - } else { - *(u16 *)(buf + done) = fake_vmeread16(priv, - addr + done, aspace, cycle); - done += 2; - } - } - } - - if (dwidth == VME_D32) { - count32 = (count - done) & ~0x3; - while (done < count32) { - *(u32 *)(buf + done) = fake_vmeread32(priv, addr + done, - aspace, cycle); - done += 4; - } - } else if (dwidth == VME_D16) { - count32 = (count - done) & ~0x3; - while (done < count32) { - *(u16 *)(buf + done) = fake_vmeread16(priv, addr + done, - aspace, cycle); - done += 2; - } - } else if (dwidth == VME_D8) { - count32 = (count - done); - while (done < count32) { - *(u8 *)(buf + done) = fake_vmeread8(priv, addr + done, - aspace, cycle); - done += 1; - } - - } - - if ((dwidth == VME_D16) || (dwidth == VME_D32)) { - if ((count - done) & 0x2) { - *(u16 *)(buf + done) = fake_vmeread16(priv, addr + done, - aspace, cycle); - done += 2; - } - } - if ((count - done) & 0x1) { - *(u8 *)(buf + done) = fake_vmeread8(priv, addr + done, aspace, - cycle); - done += 1; - } - -out: - retval = count; - - spin_unlock(&image->lock); - - return retval; -} - -static noinline_for_stack void fake_vmewrite8(struct fake_driver *bridge, - u8 *buf, unsigned long long addr, - u32 aspace, u32 cycle) -{ - int i; - unsigned long long start, end, offset; - u8 *loc; - - for (i = 0; i < FAKE_MAX_SLAVE; i++) { - if (aspace != bridge->slaves[i].aspace) - continue; - - if (cycle != bridge->slaves[i].cycle) - continue; - - start = bridge->slaves[i].vme_base; - end = bridge->slaves[i].vme_base + bridge->slaves[i].size; - - if ((addr >= start) && (addr < end)) { - offset = addr - bridge->slaves[i].vme_base; - loc = (u8 *)((void *)bridge->slaves[i].buf_base + offset); - *loc = *buf; - - break; - } - } - - fake_lm_check(bridge, addr, aspace, cycle); - -} - -static noinline_for_stack void fake_vmewrite16(struct fake_driver *bridge, - u16 *buf, unsigned long long addr, - u32 aspace, u32 cycle) -{ - int i; - unsigned long long start, end, offset; - u16 *loc; - - for (i = 0; i < FAKE_MAX_SLAVE; i++) { - if (aspace != bridge->slaves[i].aspace) - continue; - - if (cycle != bridge->slaves[i].cycle) - continue; - - start = bridge->slaves[i].vme_base; - end = bridge->slaves[i].vme_base + bridge->slaves[i].size; - - if ((addr >= start) && ((addr + 1) < end)) { - offset = addr - bridge->slaves[i].vme_base; - loc = (u16 *)((void *)bridge->slaves[i].buf_base + offset); - *loc = *buf; - - break; - } - } - - fake_lm_check(bridge, addr, aspace, cycle); - -} - -static noinline_for_stack void fake_vmewrite32(struct fake_driver *bridge, - u32 *buf, unsigned long long addr, - u32 aspace, u32 cycle) -{ - int i; - unsigned long long start, end, offset; - u32 *loc; - - for (i = 0; i < FAKE_MAX_SLAVE; i++) { - if (aspace != bridge->slaves[i].aspace) - continue; - - if (cycle != bridge->slaves[i].cycle) - continue; - - start = bridge->slaves[i].vme_base; - end = bridge->slaves[i].vme_base + bridge->slaves[i].size; - - if ((addr >= start) && ((addr + 3) < end)) { - offset = addr - bridge->slaves[i].vme_base; - loc = (u32 *)((void *)bridge->slaves[i].buf_base + offset); - *loc = *buf; - - break; - } - } - - fake_lm_check(bridge, addr, aspace, cycle); - -} - -static ssize_t fake_master_write(struct vme_master_resource *image, void *buf, - size_t count, loff_t offset) -{ - int retval = 0; - u32 aspace, cycle, dwidth; - unsigned long long addr; - int i; - unsigned int done = 0; - unsigned int count32; - - struct vme_bridge *fake_bridge; - struct fake_driver *bridge; - - fake_bridge = image->parent; - - bridge = fake_bridge->driver_priv; - - i = image->number; - - addr = bridge->masters[i].vme_base + offset; - aspace = bridge->masters[i].aspace; - cycle = bridge->masters[i].cycle; - dwidth = bridge->masters[i].dwidth; - - spin_lock(&image->lock); - - /* Here we apply for the same strategy we do in master_read - * function in order to assure the correct cycles. - */ - if (addr & 0x1) { - fake_vmewrite8(bridge, (u8 *)buf, addr, aspace, cycle); - done += 1; - if (done == count) - goto out; - } - - if ((dwidth == VME_D16) || (dwidth == VME_D32)) { - if ((addr + done) & 0x2) { - if ((count - done) < 2) { - fake_vmewrite8(bridge, (u8 *)(buf + done), - addr + done, aspace, cycle); - done += 1; - goto out; - } else { - fake_vmewrite16(bridge, (u16 *)(buf + done), - addr + done, aspace, cycle); - done += 2; - } - } - } - - if (dwidth == VME_D32) { - count32 = (count - done) & ~0x3; - while (done < count32) { - fake_vmewrite32(bridge, (u32 *)(buf + done), - addr + done, aspace, cycle); - done += 4; - } - } else if (dwidth == VME_D16) { - count32 = (count - done) & ~0x3; - while (done < count32) { - fake_vmewrite16(bridge, (u16 *)(buf + done), - addr + done, aspace, cycle); - done += 2; - } - } else if (dwidth == VME_D8) { - count32 = (count - done); - while (done < count32) { - fake_vmewrite8(bridge, (u8 *)(buf + done), addr + done, - aspace, cycle); - done += 1; - } - - } - - if ((dwidth == VME_D16) || (dwidth == VME_D32)) { - if ((count - done) & 0x2) { - fake_vmewrite16(bridge, (u16 *)(buf + done), - addr + done, aspace, cycle); - done += 2; - } - } - - if ((count - done) & 0x1) { - fake_vmewrite8(bridge, (u8 *)(buf + done), addr + done, aspace, - cycle); - done += 1; - } - -out: - retval = count; - - spin_unlock(&image->lock); - - return retval; -} - -/* - * Perform an RMW cycle on the VME bus. - * - * Requires a previously configured master window, returns final value. - */ -static unsigned int fake_master_rmw(struct vme_master_resource *image, - unsigned int mask, unsigned int compare, unsigned int swap, - loff_t offset) -{ - u32 tmp, base; - u32 aspace, cycle; - int i; - struct fake_driver *bridge; - - bridge = image->parent->driver_priv; - - /* Find the PCI address that maps to the desired VME address */ - i = image->number; - - base = bridge->masters[i].vme_base; - aspace = bridge->masters[i].aspace; - cycle = bridge->masters[i].cycle; - - /* Lock image */ - spin_lock(&image->lock); - - /* Read existing value */ - tmp = fake_vmeread32(bridge, base + offset, aspace, cycle); - - /* Perform check */ - if ((tmp && mask) == (compare && mask)) { - tmp = tmp | (mask | swap); - tmp = tmp & (~mask | swap); - - /* Write back */ - fake_vmewrite32(bridge, &tmp, base + offset, aspace, cycle); - } - - /* Unlock image */ - spin_unlock(&image->lock); - - return tmp; -} - -/* - * All 4 location monitors reside at the same base - this is therefore a - * system wide configuration. - * - * This does not enable the LM monitor - that should be done when the first - * callback is attached and disabled when the last callback is removed. - */ -static int fake_lm_set(struct vme_lm_resource *lm, unsigned long long lm_base, - u32 aspace, u32 cycle) -{ - int i; - struct vme_bridge *fake_bridge; - struct fake_driver *bridge; - - fake_bridge = lm->parent; - - bridge = fake_bridge->driver_priv; - - mutex_lock(&lm->mtx); - - /* If we already have a callback attached, we can't move it! */ - for (i = 0; i < lm->monitors; i++) { - if (bridge->lm_callback[i]) { - mutex_unlock(&lm->mtx); - pr_err("Location monitor callback attached, can't reset\n"); - return -EBUSY; - } - } - - switch (aspace) { - case VME_A16: - case VME_A24: - case VME_A32: - case VME_A64: - break; - default: - mutex_unlock(&lm->mtx); - pr_err("Invalid address space\n"); - return -EINVAL; - } - - bridge->lm_base = lm_base; - bridge->lm_aspace = aspace; - bridge->lm_cycle = cycle; - - mutex_unlock(&lm->mtx); - - return 0; -} - -/* Get configuration of the callback monitor and return whether it is enabled - * or disabled. - */ -static int fake_lm_get(struct vme_lm_resource *lm, - unsigned long long *lm_base, u32 *aspace, u32 *cycle) -{ - struct fake_driver *bridge; - - bridge = lm->parent->driver_priv; - - mutex_lock(&lm->mtx); - - *lm_base = bridge->lm_base; - *aspace = bridge->lm_aspace; - *cycle = bridge->lm_cycle; - - mutex_unlock(&lm->mtx); - - return bridge->lm_enabled; -} - -/* - * Attach a callback to a specific location monitor. - * - * Callback will be passed the monitor triggered. - */ -static int fake_lm_attach(struct vme_lm_resource *lm, int monitor, - void (*callback)(void *), void *data) -{ - struct vme_bridge *fake_bridge; - struct fake_driver *bridge; - - fake_bridge = lm->parent; - - bridge = fake_bridge->driver_priv; - - mutex_lock(&lm->mtx); - - /* Ensure that the location monitor is configured - need PGM or DATA */ - if (bridge->lm_cycle == 0) { - mutex_unlock(&lm->mtx); - pr_err("Location monitor not properly configured\n"); - return -EINVAL; - } - - /* Check that a callback isn't already attached */ - if (bridge->lm_callback[monitor]) { - mutex_unlock(&lm->mtx); - pr_err("Existing callback attached\n"); - return -EBUSY; - } - - /* Attach callback */ - bridge->lm_callback[monitor] = callback; - bridge->lm_data[monitor] = data; - - /* Ensure that global Location Monitor Enable set */ - bridge->lm_enabled = 1; - - mutex_unlock(&lm->mtx); - - return 0; -} - -/* - * Detach a callback function forn a specific location monitor. - */ -static int fake_lm_detach(struct vme_lm_resource *lm, int monitor) -{ - u32 tmp; - int i; - struct fake_driver *bridge; - - bridge = lm->parent->driver_priv; - - mutex_lock(&lm->mtx); - - /* Detach callback */ - bridge->lm_callback[monitor] = NULL; - bridge->lm_data[monitor] = NULL; - - /* If all location monitors disabled, disable global Location Monitor */ - tmp = 0; - for (i = 0; i < lm->monitors; i++) { - if (bridge->lm_callback[i]) - tmp = 1; - } - - if (tmp == 0) - bridge->lm_enabled = 0; - - mutex_unlock(&lm->mtx); - - return 0; -} - -/* - * Determine Geographical Addressing - */ -static int fake_slot_get(struct vme_bridge *fake_bridge) -{ - return geoid; -} - -static void *fake_alloc_consistent(struct device *parent, size_t size, - dma_addr_t *dma) -{ - void *alloc = kmalloc(size, GFP_KERNEL); - - if (alloc) - *dma = fake_ptr_to_pci(alloc); - - return alloc; -} - -static void fake_free_consistent(struct device *parent, size_t size, - void *vaddr, dma_addr_t dma) -{ - kfree(vaddr); -/* - dma_free_coherent(parent, size, vaddr, dma); -*/ -} - -/* - * Configure CR/CSR space - * - * Access to the CR/CSR can be configured at power-up. The location of the - * CR/CSR registers in the CR/CSR address space is determined by the boards - * Geographic address. - * - * Each board has a 512kB window, with the highest 4kB being used for the - * boards registers, this means there is a fix length 508kB window which must - * be mapped onto PCI memory. - */ -static int fake_crcsr_init(struct vme_bridge *fake_bridge) -{ - u32 vstat; - struct fake_driver *bridge; - - bridge = fake_bridge->driver_priv; - - /* Allocate mem for CR/CSR image */ - bridge->crcsr_kernel = kzalloc(VME_CRCSR_BUF_SIZE, GFP_KERNEL); - bridge->crcsr_bus = fake_ptr_to_pci(bridge->crcsr_kernel); - if (!bridge->crcsr_kernel) - return -ENOMEM; - - vstat = fake_slot_get(fake_bridge); - - pr_info("CR/CSR Offset: %d\n", vstat); - - return 0; -} - -static void fake_crcsr_exit(struct vme_bridge *fake_bridge) -{ - struct fake_driver *bridge; - - bridge = fake_bridge->driver_priv; - - kfree(bridge->crcsr_kernel); -} - - -static int __init fake_init(void) -{ - int retval, i; - struct list_head *pos = NULL, *n; - struct vme_bridge *fake_bridge; - struct fake_driver *fake_device; - struct vme_master_resource *master_image; - struct vme_slave_resource *slave_image; - struct vme_lm_resource *lm; - - /* We need a fake parent device */ - vme_root = __root_device_register("vme", THIS_MODULE); - - /* If we want to support more than one bridge at some point, we need to - * dynamically allocate this so we get one per device. - */ - fake_bridge = kzalloc(sizeof(*fake_bridge), GFP_KERNEL); - if (!fake_bridge) { - retval = -ENOMEM; - goto err_struct; - } - - fake_device = kzalloc(sizeof(*fake_device), GFP_KERNEL); - if (!fake_device) { - retval = -ENOMEM; - goto err_driver; - } - - fake_bridge->driver_priv = fake_device; - - fake_bridge->parent = vme_root; - - fake_device->parent = fake_bridge; - - /* Initialize wait queues & mutual exclusion flags */ - mutex_init(&fake_device->vme_int); - mutex_init(&fake_bridge->irq_mtx); - tasklet_init(&fake_device->int_tasklet, fake_VIRQ_tasklet, - (unsigned long) fake_bridge); - - strcpy(fake_bridge->name, driver_name); - - /* Add master windows to list */ - INIT_LIST_HEAD(&fake_bridge->master_resources); - for (i = 0; i < FAKE_MAX_MASTER; i++) { - master_image = kmalloc(sizeof(*master_image), GFP_KERNEL); - if (!master_image) { - retval = -ENOMEM; - goto err_master; - } - master_image->parent = fake_bridge; - spin_lock_init(&master_image->lock); - master_image->locked = 0; - master_image->number = i; - master_image->address_attr = VME_A16 | VME_A24 | VME_A32 | - VME_A64; - master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | - VME_PROG | VME_DATA; - master_image->width_attr = VME_D16 | VME_D32; - memset(&master_image->bus_resource, 0, - sizeof(struct resource)); - master_image->kern_base = NULL; - list_add_tail(&master_image->list, - &fake_bridge->master_resources); - } - - /* Add slave windows to list */ - INIT_LIST_HEAD(&fake_bridge->slave_resources); - for (i = 0; i < FAKE_MAX_SLAVE; i++) { - slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL); - if (!slave_image) { - retval = -ENOMEM; - goto err_slave; - } - slave_image->parent = fake_bridge; - mutex_init(&slave_image->mtx); - slave_image->locked = 0; - slave_image->number = i; - slave_image->address_attr = VME_A16 | VME_A24 | VME_A32 | - VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 | - VME_USER3 | VME_USER4; - slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | - VME_PROG | VME_DATA; - list_add_tail(&slave_image->list, - &fake_bridge->slave_resources); - } - - /* Add location monitor to list */ - INIT_LIST_HEAD(&fake_bridge->lm_resources); - lm = kmalloc(sizeof(*lm), GFP_KERNEL); - if (!lm) { - retval = -ENOMEM; - goto err_lm; - } - lm->parent = fake_bridge; - mutex_init(&lm->mtx); - lm->locked = 0; - lm->number = 1; - lm->monitors = 4; - list_add_tail(&lm->list, &fake_bridge->lm_resources); - - fake_bridge->slave_get = fake_slave_get; - fake_bridge->slave_set = fake_slave_set; - fake_bridge->master_get = fake_master_get; - fake_bridge->master_set = fake_master_set; - fake_bridge->master_read = fake_master_read; - fake_bridge->master_write = fake_master_write; - fake_bridge->master_rmw = fake_master_rmw; - fake_bridge->irq_set = fake_irq_set; - fake_bridge->irq_generate = fake_irq_generate; - fake_bridge->lm_set = fake_lm_set; - fake_bridge->lm_get = fake_lm_get; - fake_bridge->lm_attach = fake_lm_attach; - fake_bridge->lm_detach = fake_lm_detach; - fake_bridge->slot_get = fake_slot_get; - fake_bridge->alloc_consistent = fake_alloc_consistent; - fake_bridge->free_consistent = fake_free_consistent; - - pr_info("Board is%s the VME system controller\n", - (geoid == 1) ? "" : " not"); - - pr_info("VME geographical address is set to %d\n", geoid); - - retval = fake_crcsr_init(fake_bridge); - if (retval) { - pr_err("CR/CSR configuration failed.\n"); - goto err_crcsr; - } - - retval = vme_register_bridge(fake_bridge); - if (retval != 0) { - pr_err("Chip Registration failed.\n"); - goto err_reg; - } - - exit_pointer = fake_bridge; - - return 0; - -err_reg: - fake_crcsr_exit(fake_bridge); -err_crcsr: -err_lm: - /* resources are stored in link list */ - list_for_each_safe(pos, n, &fake_bridge->lm_resources) { - lm = list_entry(pos, struct vme_lm_resource, list); - list_del(pos); - kfree(lm); - } -err_slave: - /* resources are stored in link list */ - list_for_each_safe(pos, n, &fake_bridge->slave_resources) { - slave_image = list_entry(pos, struct vme_slave_resource, list); - list_del(pos); - kfree(slave_image); - } -err_master: - /* resources are stored in link list */ - list_for_each_safe(pos, n, &fake_bridge->master_resources) { - master_image = list_entry(pos, struct vme_master_resource, - list); - list_del(pos); - kfree(master_image); - } - - kfree(fake_device); -err_driver: - kfree(fake_bridge); -err_struct: - return retval; - -} - - -static void __exit fake_exit(void) -{ - struct list_head *pos = NULL; - struct list_head *tmplist; - struct vme_master_resource *master_image; - struct vme_slave_resource *slave_image; - int i; - struct vme_bridge *fake_bridge; - struct fake_driver *bridge; - - fake_bridge = exit_pointer; - - bridge = fake_bridge->driver_priv; - - pr_debug("Driver is being unloaded.\n"); - - /* - * Shutdown all inbound and outbound windows. - */ - for (i = 0; i < FAKE_MAX_MASTER; i++) - bridge->masters[i].enabled = 0; - - for (i = 0; i < FAKE_MAX_SLAVE; i++) - bridge->slaves[i].enabled = 0; - - /* - * Shutdown Location monitor. - */ - bridge->lm_enabled = 0; - - vme_unregister_bridge(fake_bridge); - - fake_crcsr_exit(fake_bridge); - /* resources are stored in link list */ - list_for_each_safe(pos, tmplist, &fake_bridge->slave_resources) { - slave_image = list_entry(pos, struct vme_slave_resource, list); - list_del(pos); - kfree(slave_image); - } - - /* resources are stored in link list */ - list_for_each_safe(pos, tmplist, &fake_bridge->master_resources) { - master_image = list_entry(pos, struct vme_master_resource, - list); - list_del(pos); - kfree(master_image); - } - - kfree(fake_bridge->driver_priv); - - kfree(fake_bridge); - - root_device_unregister(vme_root); -} - - -MODULE_PARM_DESC(geoid, "Set geographical addressing"); -module_param(geoid, int, 0); - -MODULE_DESCRIPTION("Fake VME bridge driver"); -MODULE_LICENSE("GPL"); - -module_init(fake_init); -module_exit(fake_exit); diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c deleted file mode 100644 index be9051b02f24..000000000000 --- a/drivers/vme/bridges/vme_tsi148.c +++ /dev/null @@ -1,2661 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Support for the Tundra TSI148 VME-PCI Bridge Chip - * - * Author: Martyn Welch <martyn.welch@ge.com> - * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. - * - * Based on work by Tom Armistead and Ajit Prem - * Copyright 2004 Motorola Inc. - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/mm.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/proc_fs.h> -#include <linux/pci.h> -#include <linux/poll.h> -#include <linux/dma-mapping.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/time.h> -#include <linux/io.h> -#include <linux/uaccess.h> -#include <linux/byteorder/generic.h> -#include <linux/vme.h> - -#include "../vme_bridge.h" -#include "vme_tsi148.h" - -static int tsi148_probe(struct pci_dev *, const struct pci_device_id *); -static void tsi148_remove(struct pci_dev *); - - -/* Module parameter */ -static bool err_chk; -static int geoid; - -static const char driver_name[] = "vme_tsi148"; - -static const struct pci_device_id tsi148_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_TUNDRA, PCI_DEVICE_ID_TUNDRA_TSI148) }, - { }, -}; - -MODULE_DEVICE_TABLE(pci, tsi148_ids); - -static struct pci_driver tsi148_driver = { - .name = driver_name, - .id_table = tsi148_ids, - .probe = tsi148_probe, - .remove = tsi148_remove, -}; - -static void reg_join(unsigned int high, unsigned int low, - unsigned long long *variable) -{ - *variable = (unsigned long long)high << 32; - *variable |= (unsigned long long)low; -} - -static void reg_split(unsigned long long variable, unsigned int *high, - unsigned int *low) -{ - *low = (unsigned int)variable & 0xFFFFFFFF; - *high = (unsigned int)(variable >> 32); -} - -/* - * Wakes up DMA queue. - */ -static u32 tsi148_DMA_irqhandler(struct tsi148_driver *bridge, - int channel_mask) -{ - u32 serviced = 0; - - if (channel_mask & TSI148_LCSR_INTS_DMA0S) { - wake_up(&bridge->dma_queue[0]); - serviced |= TSI148_LCSR_INTC_DMA0C; - } - if (channel_mask & TSI148_LCSR_INTS_DMA1S) { - wake_up(&bridge->dma_queue[1]); - serviced |= TSI148_LCSR_INTC_DMA1C; - } - - return serviced; -} - -/* - * Wake up location monitor queue - */ -static u32 tsi148_LM_irqhandler(struct tsi148_driver *bridge, u32 stat) -{ - int i; - u32 serviced = 0; - - for (i = 0; i < 4; i++) { - if (stat & TSI148_LCSR_INTS_LMS[i]) { - /* We only enable interrupts if the callback is set */ - bridge->lm_callback[i](bridge->lm_data[i]); - serviced |= TSI148_LCSR_INTC_LMC[i]; - } - } - - return serviced; -} - -/* - * Wake up mail box queue. - * - * XXX This functionality is not exposed up though API. - */ -static u32 tsi148_MB_irqhandler(struct vme_bridge *tsi148_bridge, u32 stat) -{ - int i; - u32 val; - u32 serviced = 0; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - for (i = 0; i < 4; i++) { - if (stat & TSI148_LCSR_INTS_MBS[i]) { - val = ioread32be(bridge->base + TSI148_GCSR_MBOX[i]); - dev_err(tsi148_bridge->parent, "VME Mailbox %d received" - ": 0x%x\n", i, val); - serviced |= TSI148_LCSR_INTC_MBC[i]; - } - } - - return serviced; -} - -/* - * Display error & status message when PERR (PCI) exception interrupt occurs. - */ -static u32 tsi148_PERR_irqhandler(struct vme_bridge *tsi148_bridge) -{ - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - dev_err(tsi148_bridge->parent, "PCI Exception at address: 0x%08x:%08x, " - "attributes: %08x\n", - ioread32be(bridge->base + TSI148_LCSR_EDPAU), - ioread32be(bridge->base + TSI148_LCSR_EDPAL), - ioread32be(bridge->base + TSI148_LCSR_EDPAT)); - - dev_err(tsi148_bridge->parent, "PCI-X attribute reg: %08x, PCI-X split " - "completion reg: %08x\n", - ioread32be(bridge->base + TSI148_LCSR_EDPXA), - ioread32be(bridge->base + TSI148_LCSR_EDPXS)); - - iowrite32be(TSI148_LCSR_EDPAT_EDPCL, bridge->base + TSI148_LCSR_EDPAT); - - return TSI148_LCSR_INTC_PERRC; -} - -/* - * Save address and status when VME error interrupt occurs. - */ -static u32 tsi148_VERR_irqhandler(struct vme_bridge *tsi148_bridge) -{ - unsigned int error_addr_high, error_addr_low; - unsigned long long error_addr; - u32 error_attrib; - int error_am; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - error_addr_high = ioread32be(bridge->base + TSI148_LCSR_VEAU); - error_addr_low = ioread32be(bridge->base + TSI148_LCSR_VEAL); - error_attrib = ioread32be(bridge->base + TSI148_LCSR_VEAT); - error_am = (error_attrib & TSI148_LCSR_VEAT_AM_M) >> 8; - - reg_join(error_addr_high, error_addr_low, &error_addr); - - /* Check for exception register overflow (we have lost error data) */ - if (error_attrib & TSI148_LCSR_VEAT_VEOF) { - dev_err(tsi148_bridge->parent, "VME Bus Exception Overflow " - "Occurred\n"); - } - - if (err_chk) - vme_bus_error_handler(tsi148_bridge, error_addr, error_am); - else - dev_err(tsi148_bridge->parent, - "VME Bus Error at address: 0x%llx, attributes: %08x\n", - error_addr, error_attrib); - - /* Clear Status */ - iowrite32be(TSI148_LCSR_VEAT_VESCL, bridge->base + TSI148_LCSR_VEAT); - - return TSI148_LCSR_INTC_VERRC; -} - -/* - * Wake up IACK queue. - */ -static u32 tsi148_IACK_irqhandler(struct tsi148_driver *bridge) -{ - wake_up(&bridge->iack_queue); - - return TSI148_LCSR_INTC_IACKC; -} - -/* - * Calling VME bus interrupt callback if provided. - */ -static u32 tsi148_VIRQ_irqhandler(struct vme_bridge *tsi148_bridge, - u32 stat) -{ - int vec, i, serviced = 0; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - for (i = 7; i > 0; i--) { - if (stat & (1 << i)) { - /* - * Note: Even though the registers are defined as - * 32-bits in the spec, we only want to issue 8-bit - * IACK cycles on the bus, read from offset 3. - */ - vec = ioread8(bridge->base + TSI148_LCSR_VIACK[i] + 3); - - vme_irq_handler(tsi148_bridge, i, vec); - - serviced |= (1 << i); - } - } - - return serviced; -} - -/* - * Top level interrupt handler. Clears appropriate interrupt status bits and - * then calls appropriate sub handler(s). - */ -static irqreturn_t tsi148_irqhandler(int irq, void *ptr) -{ - u32 stat, enable, serviced = 0; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *bridge; - - tsi148_bridge = ptr; - - bridge = tsi148_bridge->driver_priv; - - /* Determine which interrupts are unmasked and set */ - enable = ioread32be(bridge->base + TSI148_LCSR_INTEO); - stat = ioread32be(bridge->base + TSI148_LCSR_INTS); - - /* Only look at unmasked interrupts */ - stat &= enable; - - if (unlikely(!stat)) - return IRQ_NONE; - - /* Call subhandlers as appropriate */ - /* DMA irqs */ - if (stat & (TSI148_LCSR_INTS_DMA1S | TSI148_LCSR_INTS_DMA0S)) - serviced |= tsi148_DMA_irqhandler(bridge, stat); - - /* Location monitor irqs */ - if (stat & (TSI148_LCSR_INTS_LM3S | TSI148_LCSR_INTS_LM2S | - TSI148_LCSR_INTS_LM1S | TSI148_LCSR_INTS_LM0S)) - serviced |= tsi148_LM_irqhandler(bridge, stat); - - /* Mail box irqs */ - if (stat & (TSI148_LCSR_INTS_MB3S | TSI148_LCSR_INTS_MB2S | - TSI148_LCSR_INTS_MB1S | TSI148_LCSR_INTS_MB0S)) - serviced |= tsi148_MB_irqhandler(tsi148_bridge, stat); - - /* PCI bus error */ - if (stat & TSI148_LCSR_INTS_PERRS) - serviced |= tsi148_PERR_irqhandler(tsi148_bridge); - - /* VME bus error */ - if (stat & TSI148_LCSR_INTS_VERRS) - serviced |= tsi148_VERR_irqhandler(tsi148_bridge); - - /* IACK irq */ - if (stat & TSI148_LCSR_INTS_IACKS) - serviced |= tsi148_IACK_irqhandler(bridge); - - /* VME bus irqs */ - if (stat & (TSI148_LCSR_INTS_IRQ7S | TSI148_LCSR_INTS_IRQ6S | - TSI148_LCSR_INTS_IRQ5S | TSI148_LCSR_INTS_IRQ4S | - TSI148_LCSR_INTS_IRQ3S | TSI148_LCSR_INTS_IRQ2S | - TSI148_LCSR_INTS_IRQ1S)) - serviced |= tsi148_VIRQ_irqhandler(tsi148_bridge, stat); - - /* Clear serviced interrupts */ - iowrite32be(serviced, bridge->base + TSI148_LCSR_INTC); - - return IRQ_HANDLED; -} - -static int tsi148_irq_init(struct vme_bridge *tsi148_bridge) -{ - int result; - unsigned int tmp; - struct pci_dev *pdev; - struct tsi148_driver *bridge; - - pdev = to_pci_dev(tsi148_bridge->parent); - - bridge = tsi148_bridge->driver_priv; - - result = request_irq(pdev->irq, - tsi148_irqhandler, - IRQF_SHARED, - driver_name, tsi148_bridge); - if (result) { - dev_err(tsi148_bridge->parent, "Can't get assigned pci irq " - "vector %02X\n", pdev->irq); - return result; - } - - /* Enable and unmask interrupts */ - tmp = TSI148_LCSR_INTEO_DMA1EO | TSI148_LCSR_INTEO_DMA0EO | - TSI148_LCSR_INTEO_MB3EO | TSI148_LCSR_INTEO_MB2EO | - TSI148_LCSR_INTEO_MB1EO | TSI148_LCSR_INTEO_MB0EO | - TSI148_LCSR_INTEO_PERREO | TSI148_LCSR_INTEO_VERREO | - TSI148_LCSR_INTEO_IACKEO; - - /* This leaves the following interrupts masked. - * TSI148_LCSR_INTEO_VIEEO - * TSI148_LCSR_INTEO_SYSFLEO - * TSI148_LCSR_INTEO_ACFLEO - */ - - /* Don't enable Location Monitor interrupts here - they will be - * enabled when the location monitors are properly configured and - * a callback has been attached. - * TSI148_LCSR_INTEO_LM0EO - * TSI148_LCSR_INTEO_LM1EO - * TSI148_LCSR_INTEO_LM2EO - * TSI148_LCSR_INTEO_LM3EO - */ - - /* Don't enable VME interrupts until we add a handler, else the board - * will respond to it and we don't want that unless it knows how to - * properly deal with it. - * TSI148_LCSR_INTEO_IRQ7EO - * TSI148_LCSR_INTEO_IRQ6EO - * TSI148_LCSR_INTEO_IRQ5EO - * TSI148_LCSR_INTEO_IRQ4EO - * TSI148_LCSR_INTEO_IRQ3EO - * TSI148_LCSR_INTEO_IRQ2EO - * TSI148_LCSR_INTEO_IRQ1EO - */ - - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); - - return 0; -} - -static void tsi148_irq_exit(struct vme_bridge *tsi148_bridge, - struct pci_dev *pdev) -{ - struct tsi148_driver *bridge = tsi148_bridge->driver_priv; - - /* Turn off interrupts */ - iowrite32be(0x0, bridge->base + TSI148_LCSR_INTEO); - iowrite32be(0x0, bridge->base + TSI148_LCSR_INTEN); - - /* Clear all interrupts */ - iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_INTC); - - /* Detach interrupt handler */ - free_irq(pdev->irq, tsi148_bridge); -} - -/* - * Check to see if an IACk has been received, return true (1) or false (0). - */ -static int tsi148_iack_received(struct tsi148_driver *bridge) -{ - u32 tmp; - - tmp = ioread32be(bridge->base + TSI148_LCSR_VICR); - - if (tmp & TSI148_LCSR_VICR_IRQS) - return 0; - else - return 1; -} - -/* - * Configure VME interrupt - */ -static void tsi148_irq_set(struct vme_bridge *tsi148_bridge, int level, - int state, int sync) -{ - struct pci_dev *pdev; - u32 tmp; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - /* We need to do the ordering differently for enabling and disabling */ - if (state == 0) { - tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN); - tmp &= ~TSI148_LCSR_INTEN_IRQEN[level - 1]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); - - tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); - tmp &= ~TSI148_LCSR_INTEO_IRQEO[level - 1]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); - - if (sync != 0) { - pdev = to_pci_dev(tsi148_bridge->parent); - synchronize_irq(pdev->irq); - } - } else { - tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); - tmp |= TSI148_LCSR_INTEO_IRQEO[level - 1]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); - - tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN); - tmp |= TSI148_LCSR_INTEN_IRQEN[level - 1]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); - } -} - -/* - * Generate a VME bus interrupt at the requested level & vector. Wait for - * interrupt to be acked. - */ -static int tsi148_irq_generate(struct vme_bridge *tsi148_bridge, int level, - int statid) -{ - u32 tmp; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - mutex_lock(&bridge->vme_int); - - /* Read VICR register */ - tmp = ioread32be(bridge->base + TSI148_LCSR_VICR); - - /* Set Status/ID */ - tmp = (tmp & ~TSI148_LCSR_VICR_STID_M) | - (statid & TSI148_LCSR_VICR_STID_M); - iowrite32be(tmp, bridge->base + TSI148_LCSR_VICR); - - /* Assert VMEbus IRQ */ - tmp = tmp | TSI148_LCSR_VICR_IRQL[level]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_VICR); - - /* XXX Consider implementing a timeout? */ - wait_event_interruptible(bridge->iack_queue, - tsi148_iack_received(bridge)); - - mutex_unlock(&bridge->vme_int); - - return 0; -} - -/* - * Initialize a slave window with the requested attributes. - */ -static int tsi148_slave_set(struct vme_slave_resource *image, int enabled, - unsigned long long vme_base, unsigned long long size, - dma_addr_t pci_base, u32 aspace, u32 cycle) -{ - unsigned int i, addr = 0, granularity = 0; - unsigned int temp_ctl = 0; - unsigned int vme_base_low, vme_base_high; - unsigned int vme_bound_low, vme_bound_high; - unsigned int pci_offset_low, pci_offset_high; - unsigned long long vme_bound, pci_offset; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *bridge; - - tsi148_bridge = image->parent; - bridge = tsi148_bridge->driver_priv; - - i = image->number; - - switch (aspace) { - case VME_A16: - granularity = 0x10; - addr |= TSI148_LCSR_ITAT_AS_A16; - break; - case VME_A24: - granularity = 0x1000; - addr |= TSI148_LCSR_ITAT_AS_A24; - break; - case VME_A32: - granularity = 0x10000; - addr |= TSI148_LCSR_ITAT_AS_A32; - break; - case VME_A64: - granularity = 0x10000; - addr |= TSI148_LCSR_ITAT_AS_A64; - break; - default: - dev_err(tsi148_bridge->parent, "Invalid address space\n"); - return -EINVAL; - } - - /* Convert 64-bit variables to 2x 32-bit variables */ - reg_split(vme_base, &vme_base_high, &vme_base_low); - - /* - * Bound address is a valid address for the window, adjust - * accordingly - */ - vme_bound = vme_base + size - granularity; - reg_split(vme_bound, &vme_bound_high, &vme_bound_low); - pci_offset = (unsigned long long)pci_base - vme_base; - reg_split(pci_offset, &pci_offset_high, &pci_offset_low); - - if (vme_base_low & (granularity - 1)) { - dev_err(tsi148_bridge->parent, "Invalid VME base alignment\n"); - return -EINVAL; - } - if (vme_bound_low & (granularity - 1)) { - dev_err(tsi148_bridge->parent, "Invalid VME bound alignment\n"); - return -EINVAL; - } - if (pci_offset_low & (granularity - 1)) { - dev_err(tsi148_bridge->parent, "Invalid PCI Offset " - "alignment\n"); - return -EINVAL; - } - - /* Disable while we are mucking around */ - temp_ctl = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITAT); - temp_ctl &= ~TSI148_LCSR_ITAT_EN; - iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITAT); - - /* Setup mapping */ - iowrite32be(vme_base_high, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITSAU); - iowrite32be(vme_base_low, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITSAL); - iowrite32be(vme_bound_high, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITEAU); - iowrite32be(vme_bound_low, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITEAL); - iowrite32be(pci_offset_high, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITOFU); - iowrite32be(pci_offset_low, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITOFL); - - /* Setup 2eSST speeds */ - temp_ctl &= ~TSI148_LCSR_ITAT_2eSSTM_M; - switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { - case VME_2eSST160: - temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_160; - break; - case VME_2eSST267: - temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_267; - break; - case VME_2eSST320: - temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_320; - break; - } - - /* Setup cycle types */ - temp_ctl &= ~(0x1F << 7); - if (cycle & VME_BLT) - temp_ctl |= TSI148_LCSR_ITAT_BLT; - if (cycle & VME_MBLT) - temp_ctl |= TSI148_LCSR_ITAT_MBLT; - if (cycle & VME_2eVME) - temp_ctl |= TSI148_LCSR_ITAT_2eVME; - if (cycle & VME_2eSST) - temp_ctl |= TSI148_LCSR_ITAT_2eSST; - if (cycle & VME_2eSSTB) - temp_ctl |= TSI148_LCSR_ITAT_2eSSTB; - - /* Setup address space */ - temp_ctl &= ~TSI148_LCSR_ITAT_AS_M; - temp_ctl |= addr; - - temp_ctl &= ~0xF; - if (cycle & VME_SUPER) - temp_ctl |= TSI148_LCSR_ITAT_SUPR ; - if (cycle & VME_USER) - temp_ctl |= TSI148_LCSR_ITAT_NPRIV; - if (cycle & VME_PROG) - temp_ctl |= TSI148_LCSR_ITAT_PGM; - if (cycle & VME_DATA) - temp_ctl |= TSI148_LCSR_ITAT_DATA; - - /* Write ctl reg without enable */ - iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITAT); - - if (enabled) - temp_ctl |= TSI148_LCSR_ITAT_EN; - - iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITAT); - - return 0; -} - -/* - * Get slave window configuration. - */ -static int tsi148_slave_get(struct vme_slave_resource *image, int *enabled, - unsigned long long *vme_base, unsigned long long *size, - dma_addr_t *pci_base, u32 *aspace, u32 *cycle) -{ - unsigned int i, granularity = 0, ctl = 0; - unsigned int vme_base_low, vme_base_high; - unsigned int vme_bound_low, vme_bound_high; - unsigned int pci_offset_low, pci_offset_high; - unsigned long long vme_bound, pci_offset; - struct tsi148_driver *bridge; - - bridge = image->parent->driver_priv; - - i = image->number; - - /* Read registers */ - ctl = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITAT); - - vme_base_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITSAU); - vme_base_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITSAL); - vme_bound_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITEAU); - vme_bound_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITEAL); - pci_offset_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITOFU); - pci_offset_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITOFL); - - /* Convert 64-bit variables to 2x 32-bit variables */ - reg_join(vme_base_high, vme_base_low, vme_base); - reg_join(vme_bound_high, vme_bound_low, &vme_bound); - reg_join(pci_offset_high, pci_offset_low, &pci_offset); - - *pci_base = (dma_addr_t)(*vme_base + pci_offset); - - *enabled = 0; - *aspace = 0; - *cycle = 0; - - if (ctl & TSI148_LCSR_ITAT_EN) - *enabled = 1; - - if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A16) { - granularity = 0x10; - *aspace |= VME_A16; - } - if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A24) { - granularity = 0x1000; - *aspace |= VME_A24; - } - if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A32) { - granularity = 0x10000; - *aspace |= VME_A32; - } - if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A64) { - granularity = 0x10000; - *aspace |= VME_A64; - } - - /* Need granularity before we set the size */ - *size = (unsigned long long)((vme_bound - *vme_base) + granularity); - - - if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_160) - *cycle |= VME_2eSST160; - if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_267) - *cycle |= VME_2eSST267; - if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_320) - *cycle |= VME_2eSST320; - - if (ctl & TSI148_LCSR_ITAT_BLT) - *cycle |= VME_BLT; - if (ctl & TSI148_LCSR_ITAT_MBLT) - *cycle |= VME_MBLT; - if (ctl & TSI148_LCSR_ITAT_2eVME) - *cycle |= VME_2eVME; - if (ctl & TSI148_LCSR_ITAT_2eSST) - *cycle |= VME_2eSST; - if (ctl & TSI148_LCSR_ITAT_2eSSTB) - *cycle |= VME_2eSSTB; - - if (ctl & TSI148_LCSR_ITAT_SUPR) - *cycle |= VME_SUPER; - if (ctl & TSI148_LCSR_ITAT_NPRIV) - *cycle |= VME_USER; - if (ctl & TSI148_LCSR_ITAT_PGM) - *cycle |= VME_PROG; - if (ctl & TSI148_LCSR_ITAT_DATA) - *cycle |= VME_DATA; - - return 0; -} - -/* - * Allocate and map PCI Resource - */ -static int tsi148_alloc_resource(struct vme_master_resource *image, - unsigned long long size) -{ - unsigned long long existing_size; - int retval = 0; - struct pci_dev *pdev; - struct vme_bridge *tsi148_bridge; - - tsi148_bridge = image->parent; - - pdev = to_pci_dev(tsi148_bridge->parent); - - existing_size = (unsigned long long)(image->bus_resource.end - - image->bus_resource.start); - - /* If the existing size is OK, return */ - if ((size != 0) && (existing_size == (size - 1))) - return 0; - - if (existing_size != 0) { - iounmap(image->kern_base); - image->kern_base = NULL; - kfree(image->bus_resource.name); - release_resource(&image->bus_resource); - memset(&image->bus_resource, 0, sizeof(image->bus_resource)); - } - - /* Exit here if size is zero */ - if (size == 0) - return 0; - - if (!image->bus_resource.name) { - image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC); - if (!image->bus_resource.name) { - retval = -ENOMEM; - goto err_name; - } - } - - sprintf((char *)image->bus_resource.name, "%s.%d", tsi148_bridge->name, - image->number); - - image->bus_resource.start = 0; - image->bus_resource.end = (unsigned long)size; - image->bus_resource.flags = IORESOURCE_MEM; - - retval = pci_bus_alloc_resource(pdev->bus, - &image->bus_resource, size, 0x10000, PCIBIOS_MIN_MEM, - 0, NULL, NULL); - if (retval) { - dev_err(tsi148_bridge->parent, "Failed to allocate mem " - "resource for window %d size 0x%lx start 0x%lx\n", - image->number, (unsigned long)size, - (unsigned long)image->bus_resource.start); - goto err_resource; - } - - image->kern_base = ioremap( - image->bus_resource.start, size); - if (!image->kern_base) { - dev_err(tsi148_bridge->parent, "Failed to remap resource\n"); - retval = -ENOMEM; - goto err_remap; - } - - return 0; - -err_remap: - release_resource(&image->bus_resource); -err_resource: - kfree(image->bus_resource.name); - memset(&image->bus_resource, 0, sizeof(image->bus_resource)); -err_name: - return retval; -} - -/* - * Free and unmap PCI Resource - */ -static void tsi148_free_resource(struct vme_master_resource *image) -{ - iounmap(image->kern_base); - image->kern_base = NULL; - release_resource(&image->bus_resource); - kfree(image->bus_resource.name); - memset(&image->bus_resource, 0, sizeof(image->bus_resource)); -} - -/* - * Set the attributes of an outbound window. - */ -static int tsi148_master_set(struct vme_master_resource *image, int enabled, - unsigned long long vme_base, unsigned long long size, u32 aspace, - u32 cycle, u32 dwidth) -{ - int retval = 0; - unsigned int i; - unsigned int temp_ctl = 0; - unsigned int pci_base_low, pci_base_high; - unsigned int pci_bound_low, pci_bound_high; - unsigned int vme_offset_low, vme_offset_high; - unsigned long long pci_bound, vme_offset, pci_base; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *bridge; - struct pci_bus_region region; - struct pci_dev *pdev; - - tsi148_bridge = image->parent; - - bridge = tsi148_bridge->driver_priv; - - pdev = to_pci_dev(tsi148_bridge->parent); - - /* Verify input data */ - if (vme_base & 0xFFFF) { - dev_err(tsi148_bridge->parent, "Invalid VME Window " - "alignment\n"); - retval = -EINVAL; - goto err_window; - } - - if ((size == 0) && (enabled != 0)) { - dev_err(tsi148_bridge->parent, "Size must be non-zero for " - "enabled windows\n"); - retval = -EINVAL; - goto err_window; - } - - spin_lock(&image->lock); - - /* Let's allocate the resource here rather than further up the stack as - * it avoids pushing loads of bus dependent stuff up the stack. If size - * is zero, any existing resource will be freed. - */ - retval = tsi148_alloc_resource(image, size); - if (retval) { - spin_unlock(&image->lock); - dev_err(tsi148_bridge->parent, "Unable to allocate memory for " - "resource\n"); - goto err_res; - } - - if (size == 0) { - pci_base = 0; - pci_bound = 0; - vme_offset = 0; - } else { - pcibios_resource_to_bus(pdev->bus, ®ion, - &image->bus_resource); - pci_base = region.start; - - /* - * Bound address is a valid address for the window, adjust - * according to window granularity. - */ - pci_bound = pci_base + (size - 0x10000); - vme_offset = vme_base - pci_base; - } - - /* Convert 64-bit variables to 2x 32-bit variables */ - reg_split(pci_base, &pci_base_high, &pci_base_low); - reg_split(pci_bound, &pci_bound_high, &pci_bound_low); - reg_split(vme_offset, &vme_offset_high, &vme_offset_low); - - if (pci_base_low & 0xFFFF) { - spin_unlock(&image->lock); - dev_err(tsi148_bridge->parent, "Invalid PCI base alignment\n"); - retval = -EINVAL; - goto err_gran; - } - if (pci_bound_low & 0xFFFF) { - spin_unlock(&image->lock); - dev_err(tsi148_bridge->parent, "Invalid PCI bound alignment\n"); - retval = -EINVAL; - goto err_gran; - } - if (vme_offset_low & 0xFFFF) { - spin_unlock(&image->lock); - dev_err(tsi148_bridge->parent, "Invalid VME Offset " - "alignment\n"); - retval = -EINVAL; - goto err_gran; - } - - i = image->number; - - /* Disable while we are mucking around */ - temp_ctl = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTAT); - temp_ctl &= ~TSI148_LCSR_OTAT_EN; - iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTAT); - - /* Setup 2eSST speeds */ - temp_ctl &= ~TSI148_LCSR_OTAT_2eSSTM_M; - switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { - case VME_2eSST160: - temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_160; - break; - case VME_2eSST267: - temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_267; - break; - case VME_2eSST320: - temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_320; - break; - } - - /* Setup cycle types */ - if (cycle & VME_BLT) { - temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; - temp_ctl |= TSI148_LCSR_OTAT_TM_BLT; - } - if (cycle & VME_MBLT) { - temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; - temp_ctl |= TSI148_LCSR_OTAT_TM_MBLT; - } - if (cycle & VME_2eVME) { - temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; - temp_ctl |= TSI148_LCSR_OTAT_TM_2eVME; - } - if (cycle & VME_2eSST) { - temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; - temp_ctl |= TSI148_LCSR_OTAT_TM_2eSST; - } - if (cycle & VME_2eSSTB) { - dev_warn(tsi148_bridge->parent, "Currently not setting " - "Broadcast Select Registers\n"); - temp_ctl &= ~TSI148_LCSR_OTAT_TM_M; - temp_ctl |= TSI148_LCSR_OTAT_TM_2eSSTB; - } - - /* Setup data width */ - temp_ctl &= ~TSI148_LCSR_OTAT_DBW_M; - switch (dwidth) { - case VME_D16: - temp_ctl |= TSI148_LCSR_OTAT_DBW_16; - break; - case VME_D32: - temp_ctl |= TSI148_LCSR_OTAT_DBW_32; - break; - default: - spin_unlock(&image->lock); - dev_err(tsi148_bridge->parent, "Invalid data width\n"); - retval = -EINVAL; - goto err_dwidth; - } - - /* Setup address space */ - temp_ctl &= ~TSI148_LCSR_OTAT_AMODE_M; - switch (aspace) { - case VME_A16: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_A16; - break; - case VME_A24: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_A24; - break; - case VME_A32: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_A32; - break; - case VME_A64: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_A64; - break; - case VME_CRCSR: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_CRCSR; - break; - case VME_USER1: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER1; - break; - case VME_USER2: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER2; - break; - case VME_USER3: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER3; - break; - case VME_USER4: - temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER4; - break; - default: - spin_unlock(&image->lock); - dev_err(tsi148_bridge->parent, "Invalid address space\n"); - retval = -EINVAL; - goto err_aspace; - } - - temp_ctl &= ~(3<<4); - if (cycle & VME_SUPER) - temp_ctl |= TSI148_LCSR_OTAT_SUP; - if (cycle & VME_PROG) - temp_ctl |= TSI148_LCSR_OTAT_PGM; - - /* Setup mapping */ - iowrite32be(pci_base_high, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTSAU); - iowrite32be(pci_base_low, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTSAL); - iowrite32be(pci_bound_high, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTEAU); - iowrite32be(pci_bound_low, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTEAL); - iowrite32be(vme_offset_high, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTOFU); - iowrite32be(vme_offset_low, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTOFL); - - /* Write ctl reg without enable */ - iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTAT); - - if (enabled) - temp_ctl |= TSI148_LCSR_OTAT_EN; - - iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTAT); - - spin_unlock(&image->lock); - return 0; - -err_aspace: -err_dwidth: -err_gran: - tsi148_free_resource(image); -err_res: -err_window: - return retval; - -} - -/* - * Set the attributes of an outbound window. - * - * XXX Not parsing prefetch information. - */ -static int __tsi148_master_get(struct vme_master_resource *image, int *enabled, - unsigned long long *vme_base, unsigned long long *size, u32 *aspace, - u32 *cycle, u32 *dwidth) -{ - unsigned int i, ctl; - unsigned int pci_base_low, pci_base_high; - unsigned int pci_bound_low, pci_bound_high; - unsigned int vme_offset_low, vme_offset_high; - - unsigned long long pci_base, pci_bound, vme_offset; - struct tsi148_driver *bridge; - - bridge = image->parent->driver_priv; - - i = image->number; - - ctl = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTAT); - - pci_base_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTSAU); - pci_base_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTSAL); - pci_bound_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTEAU); - pci_bound_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTEAL); - vme_offset_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTOFU); - vme_offset_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTOFL); - - /* Convert 64-bit variables to 2x 32-bit variables */ - reg_join(pci_base_high, pci_base_low, &pci_base); - reg_join(pci_bound_high, pci_bound_low, &pci_bound); - reg_join(vme_offset_high, vme_offset_low, &vme_offset); - - *vme_base = pci_base + vme_offset; - *size = (unsigned long long)(pci_bound - pci_base) + 0x10000; - - *enabled = 0; - *aspace = 0; - *cycle = 0; - *dwidth = 0; - - if (ctl & TSI148_LCSR_OTAT_EN) - *enabled = 1; - - /* Setup address space */ - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A16) - *aspace |= VME_A16; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A24) - *aspace |= VME_A24; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A32) - *aspace |= VME_A32; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A64) - *aspace |= VME_A64; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_CRCSR) - *aspace |= VME_CRCSR; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER1) - *aspace |= VME_USER1; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER2) - *aspace |= VME_USER2; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER3) - *aspace |= VME_USER3; - if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER4) - *aspace |= VME_USER4; - - /* Setup 2eSST speeds */ - if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_160) - *cycle |= VME_2eSST160; - if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_267) - *cycle |= VME_2eSST267; - if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_320) - *cycle |= VME_2eSST320; - - /* Setup cycle types */ - if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_SCT) - *cycle |= VME_SCT; - if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_BLT) - *cycle |= VME_BLT; - if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_MBLT) - *cycle |= VME_MBLT; - if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eVME) - *cycle |= VME_2eVME; - if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eSST) - *cycle |= VME_2eSST; - if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eSSTB) - *cycle |= VME_2eSSTB; - - if (ctl & TSI148_LCSR_OTAT_SUP) - *cycle |= VME_SUPER; - else - *cycle |= VME_USER; - - if (ctl & TSI148_LCSR_OTAT_PGM) - *cycle |= VME_PROG; - else - *cycle |= VME_DATA; - - /* Setup data width */ - if ((ctl & TSI148_LCSR_OTAT_DBW_M) == TSI148_LCSR_OTAT_DBW_16) - *dwidth = VME_D16; - if ((ctl & TSI148_LCSR_OTAT_DBW_M) == TSI148_LCSR_OTAT_DBW_32) - *dwidth = VME_D32; - - return 0; -} - - -static int tsi148_master_get(struct vme_master_resource *image, int *enabled, - unsigned long long *vme_base, unsigned long long *size, u32 *aspace, - u32 *cycle, u32 *dwidth) -{ - int retval; - - spin_lock(&image->lock); - - retval = __tsi148_master_get(image, enabled, vme_base, size, aspace, - cycle, dwidth); - - spin_unlock(&image->lock); - - return retval; -} - -static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf, - size_t count, loff_t offset) -{ - int retval, enabled; - unsigned long long vme_base, size; - u32 aspace, cycle, dwidth; - struct vme_error_handler *handler = NULL; - struct vme_bridge *tsi148_bridge; - void __iomem *addr = image->kern_base + offset; - unsigned int done = 0; - unsigned int count32; - - tsi148_bridge = image->parent; - - spin_lock(&image->lock); - - if (err_chk) { - __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, - &cycle, &dwidth); - handler = vme_register_error_handler(tsi148_bridge, aspace, - vme_base + offset, count); - if (!handler) { - spin_unlock(&image->lock); - return -ENOMEM; - } - } - - /* The following code handles VME address alignment. We cannot use - * memcpy_xxx here because it may cut data transfers in to 8-bit - * cycles when D16 or D32 cycles are required on the VME bus. - * On the other hand, the bridge itself assures that the maximum data - * cycle configured for the transfer is used and splits it - * automatically for non-aligned addresses, so we don't want the - * overhead of needlessly forcing small transfers for the entire cycle. - */ - if ((uintptr_t)addr & 0x1) { - *(u8 *)buf = ioread8(addr); - done += 1; - if (done == count) - goto out; - } - if ((uintptr_t)(addr + done) & 0x2) { - if ((count - done) < 2) { - *(u8 *)(buf + done) = ioread8(addr + done); - done += 1; - goto out; - } else { - *(u16 *)(buf + done) = ioread16(addr + done); - done += 2; - } - } - - count32 = (count - done) & ~0x3; - while (done < count32) { - *(u32 *)(buf + done) = ioread32(addr + done); - done += 4; - } - - if ((count - done) & 0x2) { - *(u16 *)(buf + done) = ioread16(addr + done); - done += 2; - } - if ((count - done) & 0x1) { - *(u8 *)(buf + done) = ioread8(addr + done); - done += 1; - } - -out: - retval = count; - - if (err_chk) { - if (handler->num_errors) { - dev_err(image->parent->parent, - "First VME read error detected an at address 0x%llx\n", - handler->first_error); - retval = handler->first_error - (vme_base + offset); - } - vme_unregister_error_handler(handler); - } - - spin_unlock(&image->lock); - - return retval; -} - - -static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf, - size_t count, loff_t offset) -{ - int retval = 0, enabled; - unsigned long long vme_base, size; - u32 aspace, cycle, dwidth; - void __iomem *addr = image->kern_base + offset; - unsigned int done = 0; - unsigned int count32; - - struct vme_error_handler *handler = NULL; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *bridge; - - tsi148_bridge = image->parent; - - bridge = tsi148_bridge->driver_priv; - - spin_lock(&image->lock); - - if (err_chk) { - __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace, - &cycle, &dwidth); - handler = vme_register_error_handler(tsi148_bridge, aspace, - vme_base + offset, count); - if (!handler) { - spin_unlock(&image->lock); - return -ENOMEM; - } - } - - /* Here we apply for the same strategy we do in master_read - * function in order to assure the correct cycles. - */ - if ((uintptr_t)addr & 0x1) { - iowrite8(*(u8 *)buf, addr); - done += 1; - if (done == count) - goto out; - } - if ((uintptr_t)(addr + done) & 0x2) { - if ((count - done) < 2) { - iowrite8(*(u8 *)(buf + done), addr + done); - done += 1; - goto out; - } else { - iowrite16(*(u16 *)(buf + done), addr + done); - done += 2; - } - } - - count32 = (count - done) & ~0x3; - while (done < count32) { - iowrite32(*(u32 *)(buf + done), addr + done); - done += 4; - } - - if ((count - done) & 0x2) { - iowrite16(*(u16 *)(buf + done), addr + done); - done += 2; - } - if ((count - done) & 0x1) { - iowrite8(*(u8 *)(buf + done), addr + done); - done += 1; - } - -out: - retval = count; - - /* - * Writes are posted. We need to do a read on the VME bus to flush out - * all of the writes before we check for errors. We can't guarantee - * that reading the data we have just written is safe. It is believed - * that there isn't any read, write re-ordering, so we can read any - * location in VME space, so lets read the Device ID from the tsi148's - * own registers as mapped into CR/CSR space. - * - * We check for saved errors in the written address range/space. - */ - - if (err_chk) { - ioread16(bridge->flush_image->kern_base + 0x7F000); - - if (handler->num_errors) { - dev_warn(tsi148_bridge->parent, - "First VME write error detected an at address 0x%llx\n", - handler->first_error); - retval = handler->first_error - (vme_base + offset); - } - vme_unregister_error_handler(handler); - } - - spin_unlock(&image->lock); - - return retval; -} - -/* - * Perform an RMW cycle on the VME bus. - * - * Requires a previously configured master window, returns final value. - */ -static unsigned int tsi148_master_rmw(struct vme_master_resource *image, - unsigned int mask, unsigned int compare, unsigned int swap, - loff_t offset) -{ - unsigned long long pci_addr; - unsigned int pci_addr_high, pci_addr_low; - u32 tmp, result; - int i; - struct tsi148_driver *bridge; - - bridge = image->parent->driver_priv; - - /* Find the PCI address that maps to the desired VME address */ - i = image->number; - - /* Locking as we can only do one of these at a time */ - mutex_lock(&bridge->vme_rmw); - - /* Lock image */ - spin_lock(&image->lock); - - pci_addr_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTSAU); - pci_addr_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTSAL); - - reg_join(pci_addr_high, pci_addr_low, &pci_addr); - reg_split(pci_addr + offset, &pci_addr_high, &pci_addr_low); - - /* Configure registers */ - iowrite32be(mask, bridge->base + TSI148_LCSR_RMWEN); - iowrite32be(compare, bridge->base + TSI148_LCSR_RMWC); - iowrite32be(swap, bridge->base + TSI148_LCSR_RMWS); - iowrite32be(pci_addr_high, bridge->base + TSI148_LCSR_RMWAU); - iowrite32be(pci_addr_low, bridge->base + TSI148_LCSR_RMWAL); - - /* Enable RMW */ - tmp = ioread32be(bridge->base + TSI148_LCSR_VMCTRL); - tmp |= TSI148_LCSR_VMCTRL_RMWEN; - iowrite32be(tmp, bridge->base + TSI148_LCSR_VMCTRL); - - /* Kick process off with a read to the required address. */ - result = ioread32be(image->kern_base + offset); - - /* Disable RMW */ - tmp = ioread32be(bridge->base + TSI148_LCSR_VMCTRL); - tmp &= ~TSI148_LCSR_VMCTRL_RMWEN; - iowrite32be(tmp, bridge->base + TSI148_LCSR_VMCTRL); - - spin_unlock(&image->lock); - - mutex_unlock(&bridge->vme_rmw); - - return result; -} - -static int tsi148_dma_set_vme_src_attributes(struct device *dev, __be32 *attr, - u32 aspace, u32 cycle, u32 dwidth) -{ - u32 val; - - val = be32_to_cpu(*attr); - - /* Setup 2eSST speeds */ - switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { - case VME_2eSST160: - val |= TSI148_LCSR_DSAT_2eSSTM_160; - break; - case VME_2eSST267: - val |= TSI148_LCSR_DSAT_2eSSTM_267; - break; - case VME_2eSST320: - val |= TSI148_LCSR_DSAT_2eSSTM_320; - break; - } - - /* Setup cycle types */ - if (cycle & VME_SCT) - val |= TSI148_LCSR_DSAT_TM_SCT; - - if (cycle & VME_BLT) - val |= TSI148_LCSR_DSAT_TM_BLT; - - if (cycle & VME_MBLT) - val |= TSI148_LCSR_DSAT_TM_MBLT; - - if (cycle & VME_2eVME) - val |= TSI148_LCSR_DSAT_TM_2eVME; - - if (cycle & VME_2eSST) - val |= TSI148_LCSR_DSAT_TM_2eSST; - - if (cycle & VME_2eSSTB) { - dev_err(dev, "Currently not setting Broadcast Select " - "Registers\n"); - val |= TSI148_LCSR_DSAT_TM_2eSSTB; - } - - /* Setup data width */ - switch (dwidth) { - case VME_D16: - val |= TSI148_LCSR_DSAT_DBW_16; - break; - case VME_D32: - val |= TSI148_LCSR_DSAT_DBW_32; - break; - default: - dev_err(dev, "Invalid data width\n"); - return -EINVAL; - } - - /* Setup address space */ - switch (aspace) { - case VME_A16: - val |= TSI148_LCSR_DSAT_AMODE_A16; - break; - case VME_A24: - val |= TSI148_LCSR_DSAT_AMODE_A24; - break; - case VME_A32: - val |= TSI148_LCSR_DSAT_AMODE_A32; - break; - case VME_A64: - val |= TSI148_LCSR_DSAT_AMODE_A64; - break; - case VME_CRCSR: - val |= TSI148_LCSR_DSAT_AMODE_CRCSR; - break; - case VME_USER1: - val |= TSI148_LCSR_DSAT_AMODE_USER1; - break; - case VME_USER2: - val |= TSI148_LCSR_DSAT_AMODE_USER2; - break; - case VME_USER3: - val |= TSI148_LCSR_DSAT_AMODE_USER3; - break; - case VME_USER4: - val |= TSI148_LCSR_DSAT_AMODE_USER4; - break; - default: - dev_err(dev, "Invalid address space\n"); - return -EINVAL; - } - - if (cycle & VME_SUPER) - val |= TSI148_LCSR_DSAT_SUP; - if (cycle & VME_PROG) - val |= TSI148_LCSR_DSAT_PGM; - - *attr = cpu_to_be32(val); - - return 0; -} - -static int tsi148_dma_set_vme_dest_attributes(struct device *dev, __be32 *attr, - u32 aspace, u32 cycle, u32 dwidth) -{ - u32 val; - - val = be32_to_cpu(*attr); - - /* Setup 2eSST speeds */ - switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) { - case VME_2eSST160: - val |= TSI148_LCSR_DDAT_2eSSTM_160; - break; - case VME_2eSST267: - val |= TSI148_LCSR_DDAT_2eSSTM_267; - break; - case VME_2eSST320: - val |= TSI148_LCSR_DDAT_2eSSTM_320; - break; - } - - /* Setup cycle types */ - if (cycle & VME_SCT) - val |= TSI148_LCSR_DDAT_TM_SCT; - - if (cycle & VME_BLT) - val |= TSI148_LCSR_DDAT_TM_BLT; - - if (cycle & VME_MBLT) - val |= TSI148_LCSR_DDAT_TM_MBLT; - - if (cycle & VME_2eVME) - val |= TSI148_LCSR_DDAT_TM_2eVME; - - if (cycle & VME_2eSST) - val |= TSI148_LCSR_DDAT_TM_2eSST; - - if (cycle & VME_2eSSTB) { - dev_err(dev, "Currently not setting Broadcast Select " - "Registers\n"); - val |= TSI148_LCSR_DDAT_TM_2eSSTB; - } - - /* Setup data width */ - switch (dwidth) { - case VME_D16: - val |= TSI148_LCSR_DDAT_DBW_16; - break; - case VME_D32: - val |= TSI148_LCSR_DDAT_DBW_32; - break; - default: - dev_err(dev, "Invalid data width\n"); - return -EINVAL; - } - - /* Setup address space */ - switch (aspace) { - case VME_A16: - val |= TSI148_LCSR_DDAT_AMODE_A16; - break; - case VME_A24: - val |= TSI148_LCSR_DDAT_AMODE_A24; - break; - case VME_A32: - val |= TSI148_LCSR_DDAT_AMODE_A32; - break; - case VME_A64: - val |= TSI148_LCSR_DDAT_AMODE_A64; - break; - case VME_CRCSR: - val |= TSI148_LCSR_DDAT_AMODE_CRCSR; - break; - case VME_USER1: - val |= TSI148_LCSR_DDAT_AMODE_USER1; - break; - case VME_USER2: - val |= TSI148_LCSR_DDAT_AMODE_USER2; - break; - case VME_USER3: - val |= TSI148_LCSR_DDAT_AMODE_USER3; - break; - case VME_USER4: - val |= TSI148_LCSR_DDAT_AMODE_USER4; - break; - default: - dev_err(dev, "Invalid address space\n"); - return -EINVAL; - } - - if (cycle & VME_SUPER) - val |= TSI148_LCSR_DDAT_SUP; - if (cycle & VME_PROG) - val |= TSI148_LCSR_DDAT_PGM; - - *attr = cpu_to_be32(val); - - return 0; -} - -/* - * Add a link list descriptor to the list - * - * Note: DMA engine expects the DMA descriptor to be big endian. - */ -static int tsi148_dma_list_add(struct vme_dma_list *list, - struct vme_dma_attr *src, struct vme_dma_attr *dest, size_t count) -{ - struct tsi148_dma_entry *entry, *prev; - u32 address_high, address_low, val; - struct vme_dma_pattern *pattern_attr; - struct vme_dma_pci *pci_attr; - struct vme_dma_vme *vme_attr; - int retval = 0; - struct vme_bridge *tsi148_bridge; - - tsi148_bridge = list->parent->parent; - - /* Descriptor must be aligned on 64-bit boundaries */ - entry = kmalloc(sizeof(*entry), GFP_KERNEL); - if (!entry) { - retval = -ENOMEM; - goto err_mem; - } - - /* Test descriptor alignment */ - if ((unsigned long)&entry->descriptor & 0x7) { - dev_err(tsi148_bridge->parent, "Descriptor not aligned to 8 " - "byte boundary as required: %p\n", - &entry->descriptor); - retval = -EINVAL; - goto err_align; - } - - /* Given we are going to fill out the structure, we probably don't - * need to zero it, but better safe than sorry for now. - */ - memset(&entry->descriptor, 0, sizeof(entry->descriptor)); - - /* Fill out source part */ - switch (src->type) { - case VME_DMA_PATTERN: - pattern_attr = src->private; - - entry->descriptor.dsal = cpu_to_be32(pattern_attr->pattern); - - val = TSI148_LCSR_DSAT_TYP_PAT; - - /* Default behaviour is 32 bit pattern */ - if (pattern_attr->type & VME_DMA_PATTERN_BYTE) - val |= TSI148_LCSR_DSAT_PSZ; - - /* It seems that the default behaviour is to increment */ - if ((pattern_attr->type & VME_DMA_PATTERN_INCREMENT) == 0) - val |= TSI148_LCSR_DSAT_NIN; - entry->descriptor.dsat = cpu_to_be32(val); - break; - case VME_DMA_PCI: - pci_attr = src->private; - - reg_split((unsigned long long)pci_attr->address, &address_high, - &address_low); - entry->descriptor.dsau = cpu_to_be32(address_high); - entry->descriptor.dsal = cpu_to_be32(address_low); - entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_PCI); - break; - case VME_DMA_VME: - vme_attr = src->private; - - reg_split((unsigned long long)vme_attr->address, &address_high, - &address_low); - entry->descriptor.dsau = cpu_to_be32(address_high); - entry->descriptor.dsal = cpu_to_be32(address_low); - entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_VME); - - retval = tsi148_dma_set_vme_src_attributes( - tsi148_bridge->parent, &entry->descriptor.dsat, - vme_attr->aspace, vme_attr->cycle, vme_attr->dwidth); - if (retval < 0) - goto err_source; - break; - default: - dev_err(tsi148_bridge->parent, "Invalid source type\n"); - retval = -EINVAL; - goto err_source; - } - - /* Assume last link - this will be over-written by adding another */ - entry->descriptor.dnlau = cpu_to_be32(0); - entry->descriptor.dnlal = cpu_to_be32(TSI148_LCSR_DNLAL_LLA); - - /* Fill out destination part */ - switch (dest->type) { - case VME_DMA_PCI: - pci_attr = dest->private; - - reg_split((unsigned long long)pci_attr->address, &address_high, - &address_low); - entry->descriptor.ddau = cpu_to_be32(address_high); - entry->descriptor.ddal = cpu_to_be32(address_low); - entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_PCI); - break; - case VME_DMA_VME: - vme_attr = dest->private; - - reg_split((unsigned long long)vme_attr->address, &address_high, - &address_low); - entry->descriptor.ddau = cpu_to_be32(address_high); - entry->descriptor.ddal = cpu_to_be32(address_low); - entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_VME); - - retval = tsi148_dma_set_vme_dest_attributes( - tsi148_bridge->parent, &entry->descriptor.ddat, - vme_attr->aspace, vme_attr->cycle, vme_attr->dwidth); - if (retval < 0) - goto err_dest; - break; - default: - dev_err(tsi148_bridge->parent, "Invalid destination type\n"); - retval = -EINVAL; - goto err_dest; - } - - /* Fill out count */ - entry->descriptor.dcnt = cpu_to_be32((u32)count); - - /* Add to list */ - list_add_tail(&entry->list, &list->entries); - - entry->dma_handle = dma_map_single(tsi148_bridge->parent, - &entry->descriptor, - sizeof(entry->descriptor), - DMA_TO_DEVICE); - if (dma_mapping_error(tsi148_bridge->parent, entry->dma_handle)) { - dev_err(tsi148_bridge->parent, "DMA mapping error\n"); - retval = -EINVAL; - goto err_dma; - } - - /* Fill out previous descriptors "Next Address" */ - if (entry->list.prev != &list->entries) { - reg_split((unsigned long long)entry->dma_handle, &address_high, - &address_low); - prev = list_entry(entry->list.prev, struct tsi148_dma_entry, - list); - prev->descriptor.dnlau = cpu_to_be32(address_high); - prev->descriptor.dnlal = cpu_to_be32(address_low); - - } - - return 0; - -err_dma: -err_dest: -err_source: -err_align: - kfree(entry); -err_mem: - return retval; -} - -/* - * Check to see if the provided DMA channel is busy. - */ -static int tsi148_dma_busy(struct vme_bridge *tsi148_bridge, int channel) -{ - u32 tmp; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - tmp = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] + - TSI148_LCSR_OFFSET_DSTA); - - if (tmp & TSI148_LCSR_DSTA_BSY) - return 0; - else - return 1; - -} - -/* - * Execute a previously generated link list - * - * XXX Need to provide control register configuration. - */ -static int tsi148_dma_list_exec(struct vme_dma_list *list) -{ - struct vme_dma_resource *ctrlr; - int channel, retval; - struct tsi148_dma_entry *entry; - u32 bus_addr_high, bus_addr_low; - u32 val, dctlreg = 0; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *bridge; - - ctrlr = list->parent; - - tsi148_bridge = ctrlr->parent; - - bridge = tsi148_bridge->driver_priv; - - mutex_lock(&ctrlr->mtx); - - channel = ctrlr->number; - - if (!list_empty(&ctrlr->running)) { - /* - * XXX We have an active DMA transfer and currently haven't - * sorted out the mechanism for "pending" DMA transfers. - * Return busy. - */ - /* Need to add to pending here */ - mutex_unlock(&ctrlr->mtx); - return -EBUSY; - } else { - list_add(&list->list, &ctrlr->running); - } - - /* Get first bus address and write into registers */ - entry = list_first_entry(&list->entries, struct tsi148_dma_entry, - list); - - mutex_unlock(&ctrlr->mtx); - - reg_split(entry->dma_handle, &bus_addr_high, &bus_addr_low); - - iowrite32be(bus_addr_high, bridge->base + - TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAU); - iowrite32be(bus_addr_low, bridge->base + - TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAL); - - dctlreg = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] + - TSI148_LCSR_OFFSET_DCTL); - - /* Start the operation */ - iowrite32be(dctlreg | TSI148_LCSR_DCTL_DGO, bridge->base + - TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL); - - retval = wait_event_interruptible(bridge->dma_queue[channel], - tsi148_dma_busy(ctrlr->parent, channel)); - - if (retval) { - iowrite32be(dctlreg | TSI148_LCSR_DCTL_ABT, bridge->base + - TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL); - /* Wait for the operation to abort */ - wait_event(bridge->dma_queue[channel], - tsi148_dma_busy(ctrlr->parent, channel)); - retval = -EINTR; - goto exit; - } - - /* - * Read status register, this register is valid until we kick off a - * new transfer. - */ - val = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] + - TSI148_LCSR_OFFSET_DSTA); - - if (val & TSI148_LCSR_DSTA_VBE) { - dev_err(tsi148_bridge->parent, "DMA Error. DSTA=%08X\n", val); - retval = -EIO; - } - -exit: - /* Remove list from running list */ - mutex_lock(&ctrlr->mtx); - list_del(&list->list); - mutex_unlock(&ctrlr->mtx); - - return retval; -} - -/* - * Clean up a previously generated link list - * - * We have a separate function, don't assume that the chain can't be reused. - */ -static int tsi148_dma_list_empty(struct vme_dma_list *list) -{ - struct list_head *pos, *temp; - struct tsi148_dma_entry *entry; - - struct vme_bridge *tsi148_bridge = list->parent->parent; - - /* detach and free each entry */ - list_for_each_safe(pos, temp, &list->entries) { - list_del(pos); - entry = list_entry(pos, struct tsi148_dma_entry, list); - - dma_unmap_single(tsi148_bridge->parent, entry->dma_handle, - sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE); - kfree(entry); - } - - return 0; -} - -/* - * All 4 location monitors reside at the same base - this is therefore a - * system wide configuration. - * - * This does not enable the LM monitor - that should be done when the first - * callback is attached and disabled when the last callback is removed. - */ -static int tsi148_lm_set(struct vme_lm_resource *lm, unsigned long long lm_base, - u32 aspace, u32 cycle) -{ - u32 lm_base_high, lm_base_low, lm_ctl = 0; - int i; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *bridge; - - tsi148_bridge = lm->parent; - - bridge = tsi148_bridge->driver_priv; - - mutex_lock(&lm->mtx); - - /* If we already have a callback attached, we can't move it! */ - for (i = 0; i < lm->monitors; i++) { - if (bridge->lm_callback[i]) { - mutex_unlock(&lm->mtx); - dev_err(tsi148_bridge->parent, "Location monitor " - "callback attached, can't reset\n"); - return -EBUSY; - } - } - - switch (aspace) { - case VME_A16: - lm_ctl |= TSI148_LCSR_LMAT_AS_A16; - break; - case VME_A24: - lm_ctl |= TSI148_LCSR_LMAT_AS_A24; - break; - case VME_A32: - lm_ctl |= TSI148_LCSR_LMAT_AS_A32; - break; - case VME_A64: - lm_ctl |= TSI148_LCSR_LMAT_AS_A64; - break; - default: - mutex_unlock(&lm->mtx); - dev_err(tsi148_bridge->parent, "Invalid address space\n"); - return -EINVAL; - } - - if (cycle & VME_SUPER) - lm_ctl |= TSI148_LCSR_LMAT_SUPR ; - if (cycle & VME_USER) - lm_ctl |= TSI148_LCSR_LMAT_NPRIV; - if (cycle & VME_PROG) - lm_ctl |= TSI148_LCSR_LMAT_PGM; - if (cycle & VME_DATA) - lm_ctl |= TSI148_LCSR_LMAT_DATA; - - reg_split(lm_base, &lm_base_high, &lm_base_low); - - iowrite32be(lm_base_high, bridge->base + TSI148_LCSR_LMBAU); - iowrite32be(lm_base_low, bridge->base + TSI148_LCSR_LMBAL); - iowrite32be(lm_ctl, bridge->base + TSI148_LCSR_LMAT); - - mutex_unlock(&lm->mtx); - - return 0; -} - -/* Get configuration of the callback monitor and return whether it is enabled - * or disabled. - */ -static int tsi148_lm_get(struct vme_lm_resource *lm, - unsigned long long *lm_base, u32 *aspace, u32 *cycle) -{ - u32 lm_base_high, lm_base_low, lm_ctl, enabled = 0; - struct tsi148_driver *bridge; - - bridge = lm->parent->driver_priv; - - mutex_lock(&lm->mtx); - - lm_base_high = ioread32be(bridge->base + TSI148_LCSR_LMBAU); - lm_base_low = ioread32be(bridge->base + TSI148_LCSR_LMBAL); - lm_ctl = ioread32be(bridge->base + TSI148_LCSR_LMAT); - - reg_join(lm_base_high, lm_base_low, lm_base); - - if (lm_ctl & TSI148_LCSR_LMAT_EN) - enabled = 1; - - if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A16) - *aspace |= VME_A16; - - if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A24) - *aspace |= VME_A24; - - if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A32) - *aspace |= VME_A32; - - if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A64) - *aspace |= VME_A64; - - - if (lm_ctl & TSI148_LCSR_LMAT_SUPR) - *cycle |= VME_SUPER; - if (lm_ctl & TSI148_LCSR_LMAT_NPRIV) - *cycle |= VME_USER; - if (lm_ctl & TSI148_LCSR_LMAT_PGM) - *cycle |= VME_PROG; - if (lm_ctl & TSI148_LCSR_LMAT_DATA) - *cycle |= VME_DATA; - - mutex_unlock(&lm->mtx); - - return enabled; -} - -/* - * Attach a callback to a specific location monitor. - * - * Callback will be passed the monitor triggered. - */ -static int tsi148_lm_attach(struct vme_lm_resource *lm, int monitor, - void (*callback)(void *), void *data) -{ - u32 lm_ctl, tmp; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *bridge; - - tsi148_bridge = lm->parent; - - bridge = tsi148_bridge->driver_priv; - - mutex_lock(&lm->mtx); - - /* Ensure that the location monitor is configured - need PGM or DATA */ - lm_ctl = ioread32be(bridge->base + TSI148_LCSR_LMAT); - if ((lm_ctl & (TSI148_LCSR_LMAT_PGM | TSI148_LCSR_LMAT_DATA)) == 0) { - mutex_unlock(&lm->mtx); - dev_err(tsi148_bridge->parent, "Location monitor not properly " - "configured\n"); - return -EINVAL; - } - - /* Check that a callback isn't already attached */ - if (bridge->lm_callback[monitor]) { - mutex_unlock(&lm->mtx); - dev_err(tsi148_bridge->parent, "Existing callback attached\n"); - return -EBUSY; - } - - /* Attach callback */ - bridge->lm_callback[monitor] = callback; - bridge->lm_data[monitor] = data; - - /* Enable Location Monitor interrupt */ - tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN); - tmp |= TSI148_LCSR_INTEN_LMEN[monitor]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN); - - tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); - tmp |= TSI148_LCSR_INTEO_LMEO[monitor]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); - - /* Ensure that global Location Monitor Enable set */ - if ((lm_ctl & TSI148_LCSR_LMAT_EN) == 0) { - lm_ctl |= TSI148_LCSR_LMAT_EN; - iowrite32be(lm_ctl, bridge->base + TSI148_LCSR_LMAT); - } - - mutex_unlock(&lm->mtx); - - return 0; -} - -/* - * Detach a callback function forn a specific location monitor. - */ -static int tsi148_lm_detach(struct vme_lm_resource *lm, int monitor) -{ - u32 lm_en, tmp; - struct tsi148_driver *bridge; - - bridge = lm->parent->driver_priv; - - mutex_lock(&lm->mtx); - - /* Disable Location Monitor and ensure previous interrupts are clear */ - lm_en = ioread32be(bridge->base + TSI148_LCSR_INTEN); - lm_en &= ~TSI148_LCSR_INTEN_LMEN[monitor]; - iowrite32be(lm_en, bridge->base + TSI148_LCSR_INTEN); - - tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO); - tmp &= ~TSI148_LCSR_INTEO_LMEO[monitor]; - iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO); - - iowrite32be(TSI148_LCSR_INTC_LMC[monitor], - bridge->base + TSI148_LCSR_INTC); - - /* Detach callback */ - bridge->lm_callback[monitor] = NULL; - bridge->lm_data[monitor] = NULL; - - /* If all location monitors disabled, disable global Location Monitor */ - if ((lm_en & (TSI148_LCSR_INTS_LM0S | TSI148_LCSR_INTS_LM1S | - TSI148_LCSR_INTS_LM2S | TSI148_LCSR_INTS_LM3S)) == 0) { - tmp = ioread32be(bridge->base + TSI148_LCSR_LMAT); - tmp &= ~TSI148_LCSR_LMAT_EN; - iowrite32be(tmp, bridge->base + TSI148_LCSR_LMAT); - } - - mutex_unlock(&lm->mtx); - - return 0; -} - -/* - * Determine Geographical Addressing - */ -static int tsi148_slot_get(struct vme_bridge *tsi148_bridge) -{ - u32 slot = 0; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - if (!geoid) { - slot = ioread32be(bridge->base + TSI148_LCSR_VSTAT); - slot = slot & TSI148_LCSR_VSTAT_GA_M; - } else - slot = geoid; - - return (int)slot; -} - -static void *tsi148_alloc_consistent(struct device *parent, size_t size, - dma_addr_t *dma) -{ - struct pci_dev *pdev; - - /* Find pci_dev container of dev */ - pdev = to_pci_dev(parent); - - return dma_alloc_coherent(&pdev->dev, size, dma, GFP_KERNEL); -} - -static void tsi148_free_consistent(struct device *parent, size_t size, - void *vaddr, dma_addr_t dma) -{ - struct pci_dev *pdev; - - /* Find pci_dev container of dev */ - pdev = to_pci_dev(parent); - - dma_free_coherent(&pdev->dev, size, vaddr, dma); -} - -/* - * Configure CR/CSR space - * - * Access to the CR/CSR can be configured at power-up. The location of the - * CR/CSR registers in the CR/CSR address space is determined by the boards - * Auto-ID or Geographic address. This function ensures that the window is - * enabled at an offset consistent with the boards geopgraphic address. - * - * Each board has a 512kB window, with the highest 4kB being used for the - * boards registers, this means there is a fix length 508kB window which must - * be mapped onto PCI memory. - */ -static int tsi148_crcsr_init(struct vme_bridge *tsi148_bridge, - struct pci_dev *pdev) -{ - u32 cbar, crat, vstat; - u32 crcsr_bus_high, crcsr_bus_low; - int retval; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - /* Allocate mem for CR/CSR image */ - bridge->crcsr_kernel = dma_alloc_coherent(&pdev->dev, - VME_CRCSR_BUF_SIZE, - &bridge->crcsr_bus, GFP_KERNEL); - if (!bridge->crcsr_kernel) { - dev_err(tsi148_bridge->parent, "Failed to allocate memory for " - "CR/CSR image\n"); - return -ENOMEM; - } - - reg_split(bridge->crcsr_bus, &crcsr_bus_high, &crcsr_bus_low); - - iowrite32be(crcsr_bus_high, bridge->base + TSI148_LCSR_CROU); - iowrite32be(crcsr_bus_low, bridge->base + TSI148_LCSR_CROL); - - /* Ensure that the CR/CSR is configured at the correct offset */ - cbar = ioread32be(bridge->base + TSI148_CBAR); - cbar = (cbar & TSI148_CRCSR_CBAR_M)>>3; - - vstat = tsi148_slot_get(tsi148_bridge); - - if (cbar != vstat) { - cbar = vstat; - dev_info(tsi148_bridge->parent, "Setting CR/CSR offset\n"); - iowrite32be(cbar<<3, bridge->base + TSI148_CBAR); - } - dev_info(tsi148_bridge->parent, "CR/CSR Offset: %d\n", cbar); - - crat = ioread32be(bridge->base + TSI148_LCSR_CRAT); - if (crat & TSI148_LCSR_CRAT_EN) - dev_info(tsi148_bridge->parent, "CR/CSR already enabled\n"); - else { - dev_info(tsi148_bridge->parent, "Enabling CR/CSR space\n"); - iowrite32be(crat | TSI148_LCSR_CRAT_EN, - bridge->base + TSI148_LCSR_CRAT); - } - - /* If we want flushed, error-checked writes, set up a window - * over the CR/CSR registers. We read from here to safely flush - * through VME writes. - */ - if (err_chk) { - retval = tsi148_master_set(bridge->flush_image, 1, - (vstat * 0x80000), 0x80000, VME_CRCSR, VME_SCT, - VME_D16); - if (retval) - dev_err(tsi148_bridge->parent, "Configuring flush image" - " failed\n"); - } - - return 0; - -} - -static void tsi148_crcsr_exit(struct vme_bridge *tsi148_bridge, - struct pci_dev *pdev) -{ - u32 crat; - struct tsi148_driver *bridge; - - bridge = tsi148_bridge->driver_priv; - - /* Turn off CR/CSR space */ - crat = ioread32be(bridge->base + TSI148_LCSR_CRAT); - iowrite32be(crat & ~TSI148_LCSR_CRAT_EN, - bridge->base + TSI148_LCSR_CRAT); - - /* Free image */ - iowrite32be(0, bridge->base + TSI148_LCSR_CROU); - iowrite32be(0, bridge->base + TSI148_LCSR_CROL); - - dma_free_coherent(&pdev->dev, VME_CRCSR_BUF_SIZE, - bridge->crcsr_kernel, bridge->crcsr_bus); -} - -static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id) -{ - int retval, i, master_num; - u32 data; - struct list_head *pos = NULL, *n; - struct vme_bridge *tsi148_bridge; - struct tsi148_driver *tsi148_device; - struct vme_master_resource *master_image; - struct vme_slave_resource *slave_image; - struct vme_dma_resource *dma_ctrlr; - struct vme_lm_resource *lm; - - /* If we want to support more than one of each bridge, we need to - * dynamically generate this so we get one per device - */ - tsi148_bridge = kzalloc(sizeof(*tsi148_bridge), GFP_KERNEL); - if (!tsi148_bridge) { - retval = -ENOMEM; - goto err_struct; - } - vme_init_bridge(tsi148_bridge); - - tsi148_device = kzalloc(sizeof(*tsi148_device), GFP_KERNEL); - if (!tsi148_device) { - retval = -ENOMEM; - goto err_driver; - } - - tsi148_bridge->driver_priv = tsi148_device; - - /* Enable the device */ - retval = pci_enable_device(pdev); - if (retval) { - dev_err(&pdev->dev, "Unable to enable device\n"); - goto err_enable; - } - - /* Map Registers */ - retval = pci_request_regions(pdev, driver_name); - if (retval) { - dev_err(&pdev->dev, "Unable to reserve resources\n"); - goto err_resource; - } - - /* map registers in BAR 0 */ - tsi148_device->base = ioremap(pci_resource_start(pdev, 0), - 4096); - if (!tsi148_device->base) { - dev_err(&pdev->dev, "Unable to remap CRG region\n"); - retval = -EIO; - goto err_remap; - } - - /* Check to see if the mapping worked out */ - data = ioread32(tsi148_device->base + TSI148_PCFS_ID) & 0x0000FFFF; - if (data != PCI_VENDOR_ID_TUNDRA) { - dev_err(&pdev->dev, "CRG region check failed\n"); - retval = -EIO; - goto err_test; - } - - /* Initialize wait queues & mutual exclusion flags */ - init_waitqueue_head(&tsi148_device->dma_queue[0]); - init_waitqueue_head(&tsi148_device->dma_queue[1]); - init_waitqueue_head(&tsi148_device->iack_queue); - mutex_init(&tsi148_device->vme_int); - mutex_init(&tsi148_device->vme_rmw); - - tsi148_bridge->parent = &pdev->dev; - strcpy(tsi148_bridge->name, driver_name); - - /* Setup IRQ */ - retval = tsi148_irq_init(tsi148_bridge); - if (retval != 0) { - dev_err(&pdev->dev, "Chip Initialization failed.\n"); - goto err_irq; - } - - /* If we are going to flush writes, we need to read from the VME bus. - * We need to do this safely, thus we read the devices own CR/CSR - * register. To do this we must set up a window in CR/CSR space and - * hence have one less master window resource available. - */ - master_num = TSI148_MAX_MASTER; - if (err_chk) { - master_num--; - - tsi148_device->flush_image = - kmalloc(sizeof(*tsi148_device->flush_image), - GFP_KERNEL); - if (!tsi148_device->flush_image) { - retval = -ENOMEM; - goto err_master; - } - tsi148_device->flush_image->parent = tsi148_bridge; - spin_lock_init(&tsi148_device->flush_image->lock); - tsi148_device->flush_image->locked = 1; - tsi148_device->flush_image->number = master_num; - memset(&tsi148_device->flush_image->bus_resource, 0, - sizeof(tsi148_device->flush_image->bus_resource)); - tsi148_device->flush_image->kern_base = NULL; - } - - /* Add master windows to list */ - for (i = 0; i < master_num; i++) { - master_image = kmalloc(sizeof(*master_image), GFP_KERNEL); - if (!master_image) { - retval = -ENOMEM; - goto err_master; - } - master_image->parent = tsi148_bridge; - spin_lock_init(&master_image->lock); - master_image->locked = 0; - master_image->number = i; - master_image->address_attr = VME_A16 | VME_A24 | VME_A32 | - VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 | - VME_USER3 | VME_USER4; - master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | - VME_PROG | VME_DATA; - master_image->width_attr = VME_D16 | VME_D32; - memset(&master_image->bus_resource, 0, - sizeof(master_image->bus_resource)); - master_image->kern_base = NULL; - list_add_tail(&master_image->list, - &tsi148_bridge->master_resources); - } - - /* Add slave windows to list */ - for (i = 0; i < TSI148_MAX_SLAVE; i++) { - slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL); - if (!slave_image) { - retval = -ENOMEM; - goto err_slave; - } - slave_image->parent = tsi148_bridge; - mutex_init(&slave_image->mtx); - slave_image->locked = 0; - slave_image->number = i; - slave_image->address_attr = VME_A16 | VME_A24 | VME_A32 | - VME_A64; - slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | - VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 | - VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER | - VME_PROG | VME_DATA; - list_add_tail(&slave_image->list, - &tsi148_bridge->slave_resources); - } - - /* Add dma engines to list */ - for (i = 0; i < TSI148_MAX_DMA; i++) { - dma_ctrlr = kmalloc(sizeof(*dma_ctrlr), GFP_KERNEL); - if (!dma_ctrlr) { - retval = -ENOMEM; - goto err_dma; - } - dma_ctrlr->parent = tsi148_bridge; - mutex_init(&dma_ctrlr->mtx); - dma_ctrlr->locked = 0; - dma_ctrlr->number = i; - dma_ctrlr->route_attr = VME_DMA_VME_TO_MEM | - VME_DMA_MEM_TO_VME | VME_DMA_VME_TO_VME | - VME_DMA_MEM_TO_MEM | VME_DMA_PATTERN_TO_VME | - VME_DMA_PATTERN_TO_MEM; - INIT_LIST_HEAD(&dma_ctrlr->pending); - INIT_LIST_HEAD(&dma_ctrlr->running); - list_add_tail(&dma_ctrlr->list, - &tsi148_bridge->dma_resources); - } - - /* Add location monitor to list */ - lm = kmalloc(sizeof(*lm), GFP_KERNEL); - if (!lm) { - retval = -ENOMEM; - goto err_lm; - } - lm->parent = tsi148_bridge; - mutex_init(&lm->mtx); - lm->locked = 0; - lm->number = 1; - lm->monitors = 4; - list_add_tail(&lm->list, &tsi148_bridge->lm_resources); - - tsi148_bridge->slave_get = tsi148_slave_get; - tsi148_bridge->slave_set = tsi148_slave_set; - tsi148_bridge->master_get = tsi148_master_get; - tsi148_bridge->master_set = tsi148_master_set; - tsi148_bridge->master_read = tsi148_master_read; - tsi148_bridge->master_write = tsi148_master_write; - tsi148_bridge->master_rmw = tsi148_master_rmw; - tsi148_bridge->dma_list_add = tsi148_dma_list_add; - tsi148_bridge->dma_list_exec = tsi148_dma_list_exec; - tsi148_bridge->dma_list_empty = tsi148_dma_list_empty; - tsi148_bridge->irq_set = tsi148_irq_set; - tsi148_bridge->irq_generate = tsi148_irq_generate; - tsi148_bridge->lm_set = tsi148_lm_set; - tsi148_bridge->lm_get = tsi148_lm_get; - tsi148_bridge->lm_attach = tsi148_lm_attach; - tsi148_bridge->lm_detach = tsi148_lm_detach; - tsi148_bridge->slot_get = tsi148_slot_get; - tsi148_bridge->alloc_consistent = tsi148_alloc_consistent; - tsi148_bridge->free_consistent = tsi148_free_consistent; - - data = ioread32be(tsi148_device->base + TSI148_LCSR_VSTAT); - dev_info(&pdev->dev, "Board is%s the VME system controller\n", - (data & TSI148_LCSR_VSTAT_SCONS) ? "" : " not"); - if (!geoid) - dev_info(&pdev->dev, "VME geographical address is %d\n", - data & TSI148_LCSR_VSTAT_GA_M); - else - dev_info(&pdev->dev, "VME geographical address is set to %d\n", - geoid); - - dev_info(&pdev->dev, "VME Write and flush and error check is %s\n", - err_chk ? "enabled" : "disabled"); - - retval = tsi148_crcsr_init(tsi148_bridge, pdev); - if (retval) { - dev_err(&pdev->dev, "CR/CSR configuration failed.\n"); - goto err_crcsr; - } - - retval = vme_register_bridge(tsi148_bridge); - if (retval != 0) { - dev_err(&pdev->dev, "Chip Registration failed.\n"); - goto err_reg; - } - - pci_set_drvdata(pdev, tsi148_bridge); - - /* Clear VME bus "board fail", and "power-up reset" lines */ - data = ioread32be(tsi148_device->base + TSI148_LCSR_VSTAT); - data &= ~TSI148_LCSR_VSTAT_BRDFL; - data |= TSI148_LCSR_VSTAT_CPURST; - iowrite32be(data, tsi148_device->base + TSI148_LCSR_VSTAT); - - return 0; - -err_reg: - tsi148_crcsr_exit(tsi148_bridge, pdev); -err_crcsr: -err_lm: - /* resources are stored in link list */ - list_for_each_safe(pos, n, &tsi148_bridge->lm_resources) { - lm = list_entry(pos, struct vme_lm_resource, list); - list_del(pos); - kfree(lm); - } -err_dma: - /* resources are stored in link list */ - list_for_each_safe(pos, n, &tsi148_bridge->dma_resources) { - dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); - list_del(pos); - kfree(dma_ctrlr); - } -err_slave: - /* resources are stored in link list */ - list_for_each_safe(pos, n, &tsi148_bridge->slave_resources) { - slave_image = list_entry(pos, struct vme_slave_resource, list); - list_del(pos); - kfree(slave_image); - } -err_master: - /* resources are stored in link list */ - list_for_each_safe(pos, n, &tsi148_bridge->master_resources) { - master_image = list_entry(pos, struct vme_master_resource, - list); - list_del(pos); - kfree(master_image); - } - - tsi148_irq_exit(tsi148_bridge, pdev); -err_irq: -err_test: - iounmap(tsi148_device->base); -err_remap: - pci_release_regions(pdev); -err_resource: - pci_disable_device(pdev); -err_enable: - kfree(tsi148_device); -err_driver: - kfree(tsi148_bridge); -err_struct: - return retval; - -} - -static void tsi148_remove(struct pci_dev *pdev) -{ - struct list_head *pos = NULL; - struct list_head *tmplist; - struct vme_master_resource *master_image; - struct vme_slave_resource *slave_image; - struct vme_dma_resource *dma_ctrlr; - int i; - struct tsi148_driver *bridge; - struct vme_bridge *tsi148_bridge = pci_get_drvdata(pdev); - - bridge = tsi148_bridge->driver_priv; - - - dev_dbg(&pdev->dev, "Driver is being unloaded.\n"); - - /* - * Shutdown all inbound and outbound windows. - */ - for (i = 0; i < 8; i++) { - iowrite32be(0, bridge->base + TSI148_LCSR_IT[i] + - TSI148_LCSR_OFFSET_ITAT); - iowrite32be(0, bridge->base + TSI148_LCSR_OT[i] + - TSI148_LCSR_OFFSET_OTAT); - } - - /* - * Shutdown Location monitor. - */ - iowrite32be(0, bridge->base + TSI148_LCSR_LMAT); - - /* - * Shutdown CRG map. - */ - iowrite32be(0, bridge->base + TSI148_LCSR_CSRAT); - - /* - * Clear error status. - */ - iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_EDPAT); - iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_VEAT); - iowrite32be(0x07000700, bridge->base + TSI148_LCSR_PSTAT); - - /* - * Remove VIRQ interrupt (if any) - */ - if (ioread32be(bridge->base + TSI148_LCSR_VICR) & 0x800) - iowrite32be(0x8000, bridge->base + TSI148_LCSR_VICR); - - /* - * Map all Interrupts to PCI INTA - */ - iowrite32be(0x0, bridge->base + TSI148_LCSR_INTM1); - iowrite32be(0x0, bridge->base + TSI148_LCSR_INTM2); - - tsi148_irq_exit(tsi148_bridge, pdev); - - vme_unregister_bridge(tsi148_bridge); - - tsi148_crcsr_exit(tsi148_bridge, pdev); - - /* resources are stored in link list */ - list_for_each_safe(pos, tmplist, &tsi148_bridge->dma_resources) { - dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); - list_del(pos); - kfree(dma_ctrlr); - } - - /* resources are stored in link list */ - list_for_each_safe(pos, tmplist, &tsi148_bridge->slave_resources) { - slave_image = list_entry(pos, struct vme_slave_resource, list); - list_del(pos); - kfree(slave_image); - } - - /* resources are stored in link list */ - list_for_each_safe(pos, tmplist, &tsi148_bridge->master_resources) { - master_image = list_entry(pos, struct vme_master_resource, - list); - list_del(pos); - kfree(master_image); - } - - iounmap(bridge->base); - - pci_release_regions(pdev); - - pci_disable_device(pdev); - - kfree(tsi148_bridge->driver_priv); - - kfree(tsi148_bridge); -} - -module_pci_driver(tsi148_driver); - -MODULE_PARM_DESC(err_chk, "Check for VME errors on reads and writes"); -module_param(err_chk, bool, 0); - -MODULE_PARM_DESC(geoid, "Override geographical addressing"); -module_param(geoid, int, 0); - -MODULE_DESCRIPTION("VME driver for the Tundra Tempe VME bridge"); -MODULE_LICENSE("GPL"); diff --git a/drivers/vme/bridges/vme_tsi148.h b/drivers/vme/bridges/vme_tsi148.h deleted file mode 100644 index 226fedc6f167..000000000000 --- a/drivers/vme/bridges/vme_tsi148.h +++ /dev/null @@ -1,1407 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * tsi148.h - * - * Support for the Tundra TSI148 VME Bridge chip - * - * Author: Tom Armistead - * Updated and maintained by Ajit Prem - * Copyright 2004 Motorola Inc. - */ - -#ifndef TSI148_H -#define TSI148_H - -#ifndef PCI_VENDOR_ID_TUNDRA -#define PCI_VENDOR_ID_TUNDRA 0x10e3 -#endif - -#ifndef PCI_DEVICE_ID_TUNDRA_TSI148 -#define PCI_DEVICE_ID_TUNDRA_TSI148 0x148 -#endif - -/* - * Define the number of each that the Tsi148 supports. - */ -#define TSI148_MAX_MASTER 8 /* Max Master Windows */ -#define TSI148_MAX_SLAVE 8 /* Max Slave Windows */ -#define TSI148_MAX_DMA 2 /* Max DMA Controllers */ -#define TSI148_MAX_MAILBOX 4 /* Max Mail Box registers */ -#define TSI148_MAX_SEMAPHORE 8 /* Max Semaphores */ - -/* Structure used to hold driver specific information */ -struct tsi148_driver { - void __iomem *base; /* Base Address of device registers */ - wait_queue_head_t dma_queue[2]; - wait_queue_head_t iack_queue; - void (*lm_callback[4])(void *); /* Called in interrupt handler */ - void *lm_data[4]; - void *crcsr_kernel; - dma_addr_t crcsr_bus; - struct vme_master_resource *flush_image; - struct mutex vme_rmw; /* Only one RMW cycle at a time */ - struct mutex vme_int; /* - * Only one VME interrupt can be - * generated at a time, provide locking - */ -}; - -/* - * Layout of a DMAC Linked-List Descriptor - * - * Note: This structure is accessed via the chip and therefore must be - * correctly laid out - It must also be aligned on 64-bit boundaries. - */ -struct tsi148_dma_descriptor { - __be32 dsau; /* Source Address */ - __be32 dsal; - __be32 ddau; /* Destination Address */ - __be32 ddal; - __be32 dsat; /* Source attributes */ - __be32 ddat; /* Destination attributes */ - __be32 dnlau; /* Next link address */ - __be32 dnlal; - __be32 dcnt; /* Byte count */ - __be32 ddbs; /* 2eSST Broadcast select */ -}; - -struct tsi148_dma_entry { - /* - * The descriptor needs to be aligned on a 64-bit boundary, we increase - * the chance of this by putting it first in the structure. - */ - struct tsi148_dma_descriptor descriptor; - struct list_head list; - dma_addr_t dma_handle; -}; - -/* - * TSI148 ASIC register structure overlays and bit field definitions. - * - * Note: Tsi148 Register Group (CRG) consists of the following - * combination of registers: - * PCFS - PCI Configuration Space Registers - * LCSR - Local Control and Status Registers - * GCSR - Global Control and Status Registers - * CR/CSR - Subset of Configuration ROM / - * Control and Status Registers - */ - - -/* - * Command/Status Registers (CRG + $004) - */ -#define TSI148_PCFS_ID 0x0 -#define TSI148_PCFS_CSR 0x4 -#define TSI148_PCFS_CLASS 0x8 -#define TSI148_PCFS_MISC0 0xC -#define TSI148_PCFS_MBARL 0x10 -#define TSI148_PCFS_MBARU 0x14 - -#define TSI148_PCFS_SUBID 0x28 - -#define TSI148_PCFS_CAPP 0x34 - -#define TSI148_PCFS_MISC1 0x3C - -#define TSI148_PCFS_XCAPP 0x40 -#define TSI148_PCFS_XSTAT 0x44 - -/* - * LCSR definitions - */ - -/* - * Outbound Translations - */ -#define TSI148_LCSR_OT0_OTSAU 0x100 -#define TSI148_LCSR_OT0_OTSAL 0x104 -#define TSI148_LCSR_OT0_OTEAU 0x108 -#define TSI148_LCSR_OT0_OTEAL 0x10C -#define TSI148_LCSR_OT0_OTOFU 0x110 -#define TSI148_LCSR_OT0_OTOFL 0x114 -#define TSI148_LCSR_OT0_OTBS 0x118 -#define TSI148_LCSR_OT0_OTAT 0x11C - -#define TSI148_LCSR_OT1_OTSAU 0x120 -#define TSI148_LCSR_OT1_OTSAL 0x124 -#define TSI148_LCSR_OT1_OTEAU 0x128 -#define TSI148_LCSR_OT1_OTEAL 0x12C -#define TSI148_LCSR_OT1_OTOFU 0x130 -#define TSI148_LCSR_OT1_OTOFL 0x134 -#define TSI148_LCSR_OT1_OTBS 0x138 -#define TSI148_LCSR_OT1_OTAT 0x13C - -#define TSI148_LCSR_OT2_OTSAU 0x140 -#define TSI148_LCSR_OT2_OTSAL 0x144 -#define TSI148_LCSR_OT2_OTEAU 0x148 -#define TSI148_LCSR_OT2_OTEAL 0x14C -#define TSI148_LCSR_OT2_OTOFU 0x150 -#define TSI148_LCSR_OT2_OTOFL 0x154 -#define TSI148_LCSR_OT2_OTBS 0x158 -#define TSI148_LCSR_OT2_OTAT 0x15C - -#define TSI148_LCSR_OT3_OTSAU 0x160 -#define TSI148_LCSR_OT3_OTSAL 0x164 -#define TSI148_LCSR_OT3_OTEAU 0x168 -#define TSI148_LCSR_OT3_OTEAL 0x16C -#define TSI148_LCSR_OT3_OTOFU 0x170 -#define TSI148_LCSR_OT3_OTOFL 0x174 -#define TSI148_LCSR_OT3_OTBS 0x178 -#define TSI148_LCSR_OT3_OTAT 0x17C - -#define TSI148_LCSR_OT4_OTSAU 0x180 -#define TSI148_LCSR_OT4_OTSAL 0x184 -#define TSI148_LCSR_OT4_OTEAU 0x188 -#define TSI148_LCSR_OT4_OTEAL 0x18C -#define TSI148_LCSR_OT4_OTOFU 0x190 -#define TSI148_LCSR_OT4_OTOFL 0x194 -#define TSI148_LCSR_OT4_OTBS 0x198 -#define TSI148_LCSR_OT4_OTAT 0x19C - -#define TSI148_LCSR_OT5_OTSAU 0x1A0 -#define TSI148_LCSR_OT5_OTSAL 0x1A4 -#define TSI148_LCSR_OT5_OTEAU 0x1A8 -#define TSI148_LCSR_OT5_OTEAL 0x1AC -#define TSI148_LCSR_OT5_OTOFU 0x1B0 -#define TSI148_LCSR_OT5_OTOFL 0x1B4 -#define TSI148_LCSR_OT5_OTBS 0x1B8 -#define TSI148_LCSR_OT5_OTAT 0x1BC - -#define TSI148_LCSR_OT6_OTSAU 0x1C0 -#define TSI148_LCSR_OT6_OTSAL 0x1C4 -#define TSI148_LCSR_OT6_OTEAU 0x1C8 -#define TSI148_LCSR_OT6_OTEAL 0x1CC -#define TSI148_LCSR_OT6_OTOFU 0x1D0 -#define TSI148_LCSR_OT6_OTOFL 0x1D4 -#define TSI148_LCSR_OT6_OTBS 0x1D8 -#define TSI148_LCSR_OT6_OTAT 0x1DC - -#define TSI148_LCSR_OT7_OTSAU 0x1E0 -#define TSI148_LCSR_OT7_OTSAL 0x1E4 -#define TSI148_LCSR_OT7_OTEAU 0x1E8 -#define TSI148_LCSR_OT7_OTEAL 0x1EC -#define TSI148_LCSR_OT7_OTOFU 0x1F0 -#define TSI148_LCSR_OT7_OTOFL 0x1F4 -#define TSI148_LCSR_OT7_OTBS 0x1F8 -#define TSI148_LCSR_OT7_OTAT 0x1FC - -#define TSI148_LCSR_OT0 0x100 -#define TSI148_LCSR_OT1 0x120 -#define TSI148_LCSR_OT2 0x140 -#define TSI148_LCSR_OT3 0x160 -#define TSI148_LCSR_OT4 0x180 -#define TSI148_LCSR_OT5 0x1A0 -#define TSI148_LCSR_OT6 0x1C0 -#define TSI148_LCSR_OT7 0x1E0 - -static const int TSI148_LCSR_OT[8] = { TSI148_LCSR_OT0, TSI148_LCSR_OT1, - TSI148_LCSR_OT2, TSI148_LCSR_OT3, - TSI148_LCSR_OT4, TSI148_LCSR_OT5, - TSI148_LCSR_OT6, TSI148_LCSR_OT7 }; - -#define TSI148_LCSR_OFFSET_OTSAU 0x0 -#define TSI148_LCSR_OFFSET_OTSAL 0x4 -#define TSI148_LCSR_OFFSET_OTEAU 0x8 -#define TSI148_LCSR_OFFSET_OTEAL 0xC -#define TSI148_LCSR_OFFSET_OTOFU 0x10 -#define TSI148_LCSR_OFFSET_OTOFL 0x14 -#define TSI148_LCSR_OFFSET_OTBS 0x18 -#define TSI148_LCSR_OFFSET_OTAT 0x1C - -/* - * VMEbus interrupt ack - * offset 200 - */ -#define TSI148_LCSR_VIACK1 0x204 -#define TSI148_LCSR_VIACK2 0x208 -#define TSI148_LCSR_VIACK3 0x20C -#define TSI148_LCSR_VIACK4 0x210 -#define TSI148_LCSR_VIACK5 0x214 -#define TSI148_LCSR_VIACK6 0x218 -#define TSI148_LCSR_VIACK7 0x21C - -static const int TSI148_LCSR_VIACK[8] = { 0, TSI148_LCSR_VIACK1, - TSI148_LCSR_VIACK2, TSI148_LCSR_VIACK3, - TSI148_LCSR_VIACK4, TSI148_LCSR_VIACK5, - TSI148_LCSR_VIACK6, TSI148_LCSR_VIACK7 }; - -/* - * RMW - * offset 220 - */ -#define TSI148_LCSR_RMWAU 0x220 -#define TSI148_LCSR_RMWAL 0x224 -#define TSI148_LCSR_RMWEN 0x228 -#define TSI148_LCSR_RMWC 0x22C -#define TSI148_LCSR_RMWS 0x230 - -/* - * VMEbus control - * offset 234 - */ -#define TSI148_LCSR_VMCTRL 0x234 -#define TSI148_LCSR_VCTRL 0x238 -#define TSI148_LCSR_VSTAT 0x23C - -/* - * PCI status - * offset 240 - */ -#define TSI148_LCSR_PSTAT 0x240 - -/* - * VME filter. - * offset 250 - */ -#define TSI148_LCSR_VMEFL 0x250 - - /* - * VME exception. - * offset 260 - */ -#define TSI148_LCSR_VEAU 0x260 -#define TSI148_LCSR_VEAL 0x264 -#define TSI148_LCSR_VEAT 0x268 - - /* - * PCI error - * offset 270 - */ -#define TSI148_LCSR_EDPAU 0x270 -#define TSI148_LCSR_EDPAL 0x274 -#define TSI148_LCSR_EDPXA 0x278 -#define TSI148_LCSR_EDPXS 0x27C -#define TSI148_LCSR_EDPAT 0x280 - - /* - * Inbound Translations - * offset 300 - */ -#define TSI148_LCSR_IT0_ITSAU 0x300 -#define TSI148_LCSR_IT0_ITSAL 0x304 -#define TSI148_LCSR_IT0_ITEAU 0x308 -#define TSI148_LCSR_IT0_ITEAL 0x30C -#define TSI148_LCSR_IT0_ITOFU 0x310 -#define TSI148_LCSR_IT0_ITOFL 0x314 -#define TSI148_LCSR_IT0_ITAT 0x318 - -#define TSI148_LCSR_IT1_ITSAU 0x320 -#define TSI148_LCSR_IT1_ITSAL 0x324 -#define TSI148_LCSR_IT1_ITEAU 0x328 -#define TSI148_LCSR_IT1_ITEAL 0x32C -#define TSI148_LCSR_IT1_ITOFU 0x330 -#define TSI148_LCSR_IT1_ITOFL 0x334 -#define TSI148_LCSR_IT1_ITAT 0x338 - -#define TSI148_LCSR_IT2_ITSAU 0x340 -#define TSI148_LCSR_IT2_ITSAL 0x344 -#define TSI148_LCSR_IT2_ITEAU 0x348 -#define TSI148_LCSR_IT2_ITEAL 0x34C -#define TSI148_LCSR_IT2_ITOFU 0x350 -#define TSI148_LCSR_IT2_ITOFL 0x354 -#define TSI148_LCSR_IT2_ITAT 0x358 - -#define TSI148_LCSR_IT3_ITSAU 0x360 -#define TSI148_LCSR_IT3_ITSAL 0x364 -#define TSI148_LCSR_IT3_ITEAU 0x368 -#define TSI148_LCSR_IT3_ITEAL 0x36C -#define TSI148_LCSR_IT3_ITOFU 0x370 -#define TSI148_LCSR_IT3_ITOFL 0x374 -#define TSI148_LCSR_IT3_ITAT 0x378 - -#define TSI148_LCSR_IT4_ITSAU 0x380 -#define TSI148_LCSR_IT4_ITSAL 0x384 -#define TSI148_LCSR_IT4_ITEAU 0x388 -#define TSI148_LCSR_IT4_ITEAL 0x38C -#define TSI148_LCSR_IT4_ITOFU 0x390 -#define TSI148_LCSR_IT4_ITOFL 0x394 -#define TSI148_LCSR_IT4_ITAT 0x398 - -#define TSI148_LCSR_IT5_ITSAU 0x3A0 -#define TSI148_LCSR_IT5_ITSAL 0x3A4 -#define TSI148_LCSR_IT5_ITEAU 0x3A8 -#define TSI148_LCSR_IT5_ITEAL 0x3AC -#define TSI148_LCSR_IT5_ITOFU 0x3B0 -#define TSI148_LCSR_IT5_ITOFL 0x3B4 -#define TSI148_LCSR_IT5_ITAT 0x3B8 - -#define TSI148_LCSR_IT6_ITSAU 0x3C0 -#define TSI148_LCSR_IT6_ITSAL 0x3C4 -#define TSI148_LCSR_IT6_ITEAU 0x3C8 -#define TSI148_LCSR_IT6_ITEAL 0x3CC -#define TSI148_LCSR_IT6_ITOFU 0x3D0 -#define TSI148_LCSR_IT6_ITOFL 0x3D4 -#define TSI148_LCSR_IT6_ITAT 0x3D8 - -#define TSI148_LCSR_IT7_ITSAU 0x3E0 -#define TSI148_LCSR_IT7_ITSAL 0x3E4 -#define TSI148_LCSR_IT7_ITEAU 0x3E8 -#define TSI148_LCSR_IT7_ITEAL 0x3EC -#define TSI148_LCSR_IT7_ITOFU 0x3F0 -#define TSI148_LCSR_IT7_ITOFL 0x3F4 -#define TSI148_LCSR_IT7_ITAT 0x3F8 - - -#define TSI148_LCSR_IT0 0x300 -#define TSI148_LCSR_IT1 0x320 -#define TSI148_LCSR_IT2 0x340 -#define TSI148_LCSR_IT3 0x360 -#define TSI148_LCSR_IT4 0x380 -#define TSI148_LCSR_IT5 0x3A0 -#define TSI148_LCSR_IT6 0x3C0 -#define TSI148_LCSR_IT7 0x3E0 - -static const int TSI148_LCSR_IT[8] = { TSI148_LCSR_IT0, TSI148_LCSR_IT1, - TSI148_LCSR_IT2, TSI148_LCSR_IT3, - TSI148_LCSR_IT4, TSI148_LCSR_IT5, - TSI148_LCSR_IT6, TSI148_LCSR_IT7 }; - -#define TSI148_LCSR_OFFSET_ITSAU 0x0 -#define TSI148_LCSR_OFFSET_ITSAL 0x4 -#define TSI148_LCSR_OFFSET_ITEAU 0x8 -#define TSI148_LCSR_OFFSET_ITEAL 0xC -#define TSI148_LCSR_OFFSET_ITOFU 0x10 -#define TSI148_LCSR_OFFSET_ITOFL 0x14 -#define TSI148_LCSR_OFFSET_ITAT 0x18 - - /* - * Inbound Translation GCSR - * offset 400 - */ -#define TSI148_LCSR_GBAU 0x400 -#define TSI148_LCSR_GBAL 0x404 -#define TSI148_LCSR_GCSRAT 0x408 - - /* - * Inbound Translation CRG - * offset 40C - */ -#define TSI148_LCSR_CBAU 0x40C -#define TSI148_LCSR_CBAL 0x410 -#define TSI148_LCSR_CSRAT 0x414 - - /* - * Inbound Translation CR/CSR - * CRG - * offset 418 - */ -#define TSI148_LCSR_CROU 0x418 -#define TSI148_LCSR_CROL 0x41C -#define TSI148_LCSR_CRAT 0x420 - - /* - * Inbound Translation Location Monitor - * offset 424 - */ -#define TSI148_LCSR_LMBAU 0x424 -#define TSI148_LCSR_LMBAL 0x428 -#define TSI148_LCSR_LMAT 0x42C - - /* - * VMEbus Interrupt Control. - * offset 430 - */ -#define TSI148_LCSR_BCU 0x430 -#define TSI148_LCSR_BCL 0x434 -#define TSI148_LCSR_BPGTR 0x438 -#define TSI148_LCSR_BPCTR 0x43C -#define TSI148_LCSR_VICR 0x440 - - /* - * Local Bus Interrupt Control. - * offset 448 - */ -#define TSI148_LCSR_INTEN 0x448 -#define TSI148_LCSR_INTEO 0x44C -#define TSI148_LCSR_INTS 0x450 -#define TSI148_LCSR_INTC 0x454 -#define TSI148_LCSR_INTM1 0x458 -#define TSI148_LCSR_INTM2 0x45C - - /* - * DMA Controllers - * offset 500 - */ -#define TSI148_LCSR_DCTL0 0x500 -#define TSI148_LCSR_DSTA0 0x504 -#define TSI148_LCSR_DCSAU0 0x508 -#define TSI148_LCSR_DCSAL0 0x50C -#define TSI148_LCSR_DCDAU0 0x510 -#define TSI148_LCSR_DCDAL0 0x514 -#define TSI148_LCSR_DCLAU0 0x518 -#define TSI148_LCSR_DCLAL0 0x51C -#define TSI148_LCSR_DSAU0 0x520 -#define TSI148_LCSR_DSAL0 0x524 -#define TSI148_LCSR_DDAU0 0x528 -#define TSI148_LCSR_DDAL0 0x52C -#define TSI148_LCSR_DSAT0 0x530 -#define TSI148_LCSR_DDAT0 0x534 -#define TSI148_LCSR_DNLAU0 0x538 -#define TSI148_LCSR_DNLAL0 0x53C -#define TSI148_LCSR_DCNT0 0x540 -#define TSI148_LCSR_DDBS0 0x544 - -#define TSI148_LCSR_DCTL1 0x580 -#define TSI148_LCSR_DSTA1 0x584 -#define TSI148_LCSR_DCSAU1 0x588 -#define TSI148_LCSR_DCSAL1 0x58C -#define TSI148_LCSR_DCDAU1 0x590 -#define TSI148_LCSR_DCDAL1 0x594 -#define TSI148_LCSR_DCLAU1 0x598 -#define TSI148_LCSR_DCLAL1 0x59C -#define TSI148_LCSR_DSAU1 0x5A0 -#define TSI148_LCSR_DSAL1 0x5A4 -#define TSI148_LCSR_DDAU1 0x5A8 -#define TSI148_LCSR_DDAL1 0x5AC -#define TSI148_LCSR_DSAT1 0x5B0 -#define TSI148_LCSR_DDAT1 0x5B4 -#define TSI148_LCSR_DNLAU1 0x5B8 -#define TSI148_LCSR_DNLAL1 0x5BC -#define TSI148_LCSR_DCNT1 0x5C0 -#define TSI148_LCSR_DDBS1 0x5C4 - -#define TSI148_LCSR_DMA0 0x500 -#define TSI148_LCSR_DMA1 0x580 - - -static const int TSI148_LCSR_DMA[TSI148_MAX_DMA] = { TSI148_LCSR_DMA0, - TSI148_LCSR_DMA1 }; - -#define TSI148_LCSR_OFFSET_DCTL 0x0 -#define TSI148_LCSR_OFFSET_DSTA 0x4 -#define TSI148_LCSR_OFFSET_DCSAU 0x8 -#define TSI148_LCSR_OFFSET_DCSAL 0xC -#define TSI148_LCSR_OFFSET_DCDAU 0x10 -#define TSI148_LCSR_OFFSET_DCDAL 0x14 -#define TSI148_LCSR_OFFSET_DCLAU 0x18 -#define TSI148_LCSR_OFFSET_DCLAL 0x1C -#define TSI148_LCSR_OFFSET_DSAU 0x20 -#define TSI148_LCSR_OFFSET_DSAL 0x24 -#define TSI148_LCSR_OFFSET_DDAU 0x28 -#define TSI148_LCSR_OFFSET_DDAL 0x2C -#define TSI148_LCSR_OFFSET_DSAT 0x30 -#define TSI148_LCSR_OFFSET_DDAT 0x34 -#define TSI148_LCSR_OFFSET_DNLAU 0x38 -#define TSI148_LCSR_OFFSET_DNLAL 0x3C -#define TSI148_LCSR_OFFSET_DCNT 0x40 -#define TSI148_LCSR_OFFSET_DDBS 0x44 - - /* - * GCSR Register Group - */ - - /* - * GCSR CRG - * offset 00 600 - DEVI/VENI - * offset 04 604 - CTRL/GA/REVID - * offset 08 608 - Semaphore3/2/1/0 - * offset 0C 60C - Seamphore7/6/5/4 - */ -#define TSI148_GCSR_ID 0x600 -#define TSI148_GCSR_CSR 0x604 -#define TSI148_GCSR_SEMA0 0x608 -#define TSI148_GCSR_SEMA1 0x60C - - /* - * Mail Box - * GCSR CRG - * offset 10 610 - Mailbox0 - */ -#define TSI148_GCSR_MBOX0 0x610 -#define TSI148_GCSR_MBOX1 0x614 -#define TSI148_GCSR_MBOX2 0x618 -#define TSI148_GCSR_MBOX3 0x61C - -static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0, - TSI148_GCSR_MBOX1, - TSI148_GCSR_MBOX2, - TSI148_GCSR_MBOX3 }; - - /* - * CR/CSR - */ - - /* - * CR/CSR CRG - * offset 7FFF4 FF4 - CSRBCR - * offset 7FFF8 FF8 - CSRBSR - * offset 7FFFC FFC - CBAR - */ -#define TSI148_CSRBCR 0xFF4 -#define TSI148_CSRBSR 0xFF8 -#define TSI148_CBAR 0xFFC - - - - - /* - * TSI148 Register Bit Definitions - */ - - /* - * PFCS Register Set - */ -#define TSI148_PCFS_CMMD_SERR (1<<8) /* SERR_L out pin ssys err */ -#define TSI148_PCFS_CMMD_PERR (1<<6) /* PERR_L out pin parity */ -#define TSI148_PCFS_CMMD_MSTR (1<<2) /* PCI bus master */ -#define TSI148_PCFS_CMMD_MEMSP (1<<1) /* PCI mem space access */ -#define TSI148_PCFS_CMMD_IOSP (1<<0) /* PCI I/O space enable */ - -#define TSI148_PCFS_STAT_RCPVE (1<<15) /* Detected Parity Error */ -#define TSI148_PCFS_STAT_SIGSE (1<<14) /* Signalled System Error */ -#define TSI148_PCFS_STAT_RCVMA (1<<13) /* Received Master Abort */ -#define TSI148_PCFS_STAT_RCVTA (1<<12) /* Received Target Abort */ -#define TSI148_PCFS_STAT_SIGTA (1<<11) /* Signalled Target Abort */ -#define TSI148_PCFS_STAT_SELTIM (3<<9) /* DELSEL Timing */ -#define TSI148_PCFS_STAT_DPAR (1<<8) /* Data Parity Err Reported */ -#define TSI148_PCFS_STAT_FAST (1<<7) /* Fast back-to-back Cap */ -#define TSI148_PCFS_STAT_P66M (1<<5) /* 66 MHz Capable */ -#define TSI148_PCFS_STAT_CAPL (1<<4) /* Capab List - address $34 */ - -/* - * Revision ID/Class Code Registers (CRG +$008) - */ -#define TSI148_PCFS_CLAS_M (0xFF<<24) /* Class ID */ -#define TSI148_PCFS_SUBCLAS_M (0xFF<<16) /* Sub-Class ID */ -#define TSI148_PCFS_PROGIF_M (0xFF<<8) /* Sub-Class ID */ -#define TSI148_PCFS_REVID_M (0xFF<<0) /* Rev ID */ - -/* - * Cache Line Size/ Master Latency Timer/ Header Type Registers (CRG + $00C) - */ -#define TSI148_PCFS_HEAD_M (0xFF<<16) /* Master Lat Timer */ -#define TSI148_PCFS_MLAT_M (0xFF<<8) /* Master Lat Timer */ -#define TSI148_PCFS_CLSZ_M (0xFF<<0) /* Cache Line Size */ - -/* - * Memory Base Address Lower Reg (CRG + $010) - */ -#define TSI148_PCFS_MBARL_BASEL_M (0xFFFFF<<12) /* Base Addr Lower Mask */ -#define TSI148_PCFS_MBARL_PRE (1<<3) /* Prefetch */ -#define TSI148_PCFS_MBARL_MTYPE_M (3<<1) /* Memory Type Mask */ -#define TSI148_PCFS_MBARL_IOMEM (1<<0) /* I/O Space Indicator */ - -/* - * Message Signaled Interrupt Capabilities Register (CRG + $040) - */ -#define TSI148_PCFS_MSICAP_64BAC (1<<7) /* 64-bit Address Capable */ -#define TSI148_PCFS_MSICAP_MME_M (7<<4) /* Multiple Msg Enable Mask */ -#define TSI148_PCFS_MSICAP_MMC_M (7<<1) /* Multiple Msg Capable Mask */ -#define TSI148_PCFS_MSICAP_MSIEN (1<<0) /* Msg signaled INT Enable */ - -/* - * Message Address Lower Register (CRG +$044) - */ -#define TSI148_PCFS_MSIAL_M (0x3FFFFFFF<<2) /* Mask */ - -/* - * Message Data Register (CRG + 4C) - */ -#define TSI148_PCFS_MSIMD_M (0xFFFF<<0) /* Mask */ - -/* - * PCI-X Capabilities Register (CRG + $050) - */ -#define TSI148_PCFS_PCIXCAP_MOST_M (7<<4) /* Max outstanding Split Tran */ -#define TSI148_PCFS_PCIXCAP_MMRBC_M (3<<2) /* Max Mem Read byte cnt */ -#define TSI148_PCFS_PCIXCAP_ERO (1<<1) /* Enable Relaxed Ordering */ -#define TSI148_PCFS_PCIXCAP_DPERE (1<<0) /* Data Parity Recover Enable */ - -/* - * PCI-X Status Register (CRG +$054) - */ -#define TSI148_PCFS_PCIXSTAT_RSCEM (1<<29) /* Received Split Comp Error */ -#define TSI148_PCFS_PCIXSTAT_DMCRS_M (7<<26) /* max Cumulative Read Size */ -#define TSI148_PCFS_PCIXSTAT_DMOST_M (7<<23) /* max outstanding Split Trans - */ -#define TSI148_PCFS_PCIXSTAT_DMMRC_M (3<<21) /* max mem read byte count */ -#define TSI148_PCFS_PCIXSTAT_DC (1<<20) /* Device Complexity */ -#define TSI148_PCFS_PCIXSTAT_USC (1<<19) /* Unexpected Split comp */ -#define TSI148_PCFS_PCIXSTAT_SCD (1<<18) /* Split completion discard */ -#define TSI148_PCFS_PCIXSTAT_133C (1<<17) /* 133MHz capable */ -#define TSI148_PCFS_PCIXSTAT_64D (1<<16) /* 64 bit device */ -#define TSI148_PCFS_PCIXSTAT_BN_M (0xFF<<8) /* Bus number */ -#define TSI148_PCFS_PCIXSTAT_DN_M (0x1F<<3) /* Device number */ -#define TSI148_PCFS_PCIXSTAT_FN_M (7<<0) /* Function Number */ - -/* - * LCSR Registers - */ - -/* - * Outbound Translation Starting Address Lower - */ -#define TSI148_LCSR_OTSAL_M (0xFFFF<<16) /* Mask */ - -/* - * Outbound Translation Ending Address Lower - */ -#define TSI148_LCSR_OTEAL_M (0xFFFF<<16) /* Mask */ - -/* - * Outbound Translation Offset Lower - */ -#define TSI148_LCSR_OTOFFL_M (0xFFFF<<16) /* Mask */ - -/* - * Outbound Translation 2eSST Broadcast Select - */ -#define TSI148_LCSR_OTBS_M (0xFFFFF<<0) /* Mask */ - -/* - * Outbound Translation Attribute - */ -#define TSI148_LCSR_OTAT_EN (1<<31) /* Window Enable */ -#define TSI148_LCSR_OTAT_MRPFD (1<<18) /* Prefetch Disable */ - -#define TSI148_LCSR_OTAT_PFS_M (3<<16) /* Prefetch Size Mask */ -#define TSI148_LCSR_OTAT_PFS_2 (0<<16) /* 2 Cache Lines P Size */ -#define TSI148_LCSR_OTAT_PFS_4 (1<<16) /* 4 Cache Lines P Size */ -#define TSI148_LCSR_OTAT_PFS_8 (2<<16) /* 8 Cache Lines P Size */ -#define TSI148_LCSR_OTAT_PFS_16 (3<<16) /* 16 Cache Lines P Size */ - -#define TSI148_LCSR_OTAT_2eSSTM_M (7<<11) /* 2eSST Xfer Rate Mask */ -#define TSI148_LCSR_OTAT_2eSSTM_160 (0<<11) /* 160MB/s 2eSST Xfer Rate */ -#define TSI148_LCSR_OTAT_2eSSTM_267 (1<<11) /* 267MB/s 2eSST Xfer Rate */ -#define TSI148_LCSR_OTAT_2eSSTM_320 (2<<11) /* 320MB/s 2eSST Xfer Rate */ - -#define TSI148_LCSR_OTAT_TM_M (7<<8) /* Xfer Protocol Mask */ -#define TSI148_LCSR_OTAT_TM_SCT (0<<8) /* SCT Xfer Protocol */ -#define TSI148_LCSR_OTAT_TM_BLT (1<<8) /* BLT Xfer Protocol */ -#define TSI148_LCSR_OTAT_TM_MBLT (2<<8) /* MBLT Xfer Protocol */ -#define TSI148_LCSR_OTAT_TM_2eVME (3<<8) /* 2eVME Xfer Protocol */ -#define TSI148_LCSR_OTAT_TM_2eSST (4<<8) /* 2eSST Xfer Protocol */ -#define TSI148_LCSR_OTAT_TM_2eSSTB (5<<8) /* 2eSST Bcast Xfer Protocol */ - -#define TSI148_LCSR_OTAT_DBW_M (3<<6) /* Max Data Width */ -#define TSI148_LCSR_OTAT_DBW_16 (0<<6) /* 16-bit Data Width */ -#define TSI148_LCSR_OTAT_DBW_32 (1<<6) /* 32-bit Data Width */ - -#define TSI148_LCSR_OTAT_SUP (1<<5) /* Supervisory Access */ -#define TSI148_LCSR_OTAT_PGM (1<<4) /* Program Access */ - -#define TSI148_LCSR_OTAT_AMODE_M (0xf<<0) /* Address Mode Mask */ -#define TSI148_LCSR_OTAT_AMODE_A16 (0<<0) /* A16 Address Space */ -#define TSI148_LCSR_OTAT_AMODE_A24 (1<<0) /* A24 Address Space */ -#define TSI148_LCSR_OTAT_AMODE_A32 (2<<0) /* A32 Address Space */ -#define TSI148_LCSR_OTAT_AMODE_A64 (4<<0) /* A32 Address Space */ -#define TSI148_LCSR_OTAT_AMODE_CRCSR (5<<0) /* CR/CSR Address Space */ -#define TSI148_LCSR_OTAT_AMODE_USER1 (8<<0) /* User1 Address Space */ -#define TSI148_LCSR_OTAT_AMODE_USER2 (9<<0) /* User2 Address Space */ -#define TSI148_LCSR_OTAT_AMODE_USER3 (10<<0) /* User3 Address Space */ -#define TSI148_LCSR_OTAT_AMODE_USER4 (11<<0) /* User4 Address Space */ - -/* - * VME Master Control Register CRG+$234 - */ -#define TSI148_LCSR_VMCTRL_VSA (1<<27) /* VMEbus Stop Ack */ -#define TSI148_LCSR_VMCTRL_VS (1<<26) /* VMEbus Stop */ -#define TSI148_LCSR_VMCTRL_DHB (1<<25) /* Device Has Bus */ -#define TSI148_LCSR_VMCTRL_DWB (1<<24) /* Device Wants Bus */ - -#define TSI148_LCSR_VMCTRL_RMWEN (1<<20) /* RMW Enable */ - -#define TSI148_LCSR_VMCTRL_ATO_M (7<<16) /* Master Access Time-out Mask - */ -#define TSI148_LCSR_VMCTRL_ATO_32 (0<<16) /* 32 us */ -#define TSI148_LCSR_VMCTRL_ATO_128 (1<<16) /* 128 us */ -#define TSI148_LCSR_VMCTRL_ATO_512 (2<<16) /* 512 us */ -#define TSI148_LCSR_VMCTRL_ATO_2M (3<<16) /* 2 ms */ -#define TSI148_LCSR_VMCTRL_ATO_8M (4<<16) /* 8 ms */ -#define TSI148_LCSR_VMCTRL_ATO_32M (5<<16) /* 32 ms */ -#define TSI148_LCSR_VMCTRL_ATO_128M (6<<16) /* 128 ms */ -#define TSI148_LCSR_VMCTRL_ATO_DIS (7<<16) /* Disabled */ - -#define TSI148_LCSR_VMCTRL_VTOFF_M (7<<12) /* VMEbus Master Time off */ -#define TSI148_LCSR_VMCTRL_VTOFF_0 (0<<12) /* 0us */ -#define TSI148_LCSR_VMCTRL_VTOFF_1 (1<<12) /* 1us */ -#define TSI148_LCSR_VMCTRL_VTOFF_2 (2<<12) /* 2us */ -#define TSI148_LCSR_VMCTRL_VTOFF_4 (3<<12) /* 4us */ -#define TSI148_LCSR_VMCTRL_VTOFF_8 (4<<12) /* 8us */ -#define TSI148_LCSR_VMCTRL_VTOFF_16 (5<<12) /* 16us */ -#define TSI148_LCSR_VMCTRL_VTOFF_32 (6<<12) /* 32us */ -#define TSI148_LCSR_VMCTRL_VTOFF_64 (7<<12) /* 64us */ - -#define TSI148_LCSR_VMCTRL_VTON_M (7<<8) /* VMEbus Master Time On */ -#define TSI148_LCSR_VMCTRL_VTON_4 (0<<8) /* 8us */ -#define TSI148_LCSR_VMCTRL_VTON_8 (1<<8) /* 8us */ -#define TSI148_LCSR_VMCTRL_VTON_16 (2<<8) /* 16us */ -#define TSI148_LCSR_VMCTRL_VTON_32 (3<<8) /* 32us */ -#define TSI148_LCSR_VMCTRL_VTON_64 (4<<8) /* 64us */ -#define TSI148_LCSR_VMCTRL_VTON_128 (5<<8) /* 128us */ -#define TSI148_LCSR_VMCTRL_VTON_256 (6<<8) /* 256us */ -#define TSI148_LCSR_VMCTRL_VTON_512 (7<<8) /* 512us */ - -#define TSI148_LCSR_VMCTRL_VREL_M (3<<3) /* VMEbus Master Rel Mode Mask - */ -#define TSI148_LCSR_VMCTRL_VREL_T_D (0<<3) /* Time on or Done */ -#define TSI148_LCSR_VMCTRL_VREL_T_R_D (1<<3) /* Time on and REQ or Done */ -#define TSI148_LCSR_VMCTRL_VREL_T_B_D (2<<3) /* Time on and BCLR or Done */ -#define TSI148_LCSR_VMCTRL_VREL_T_D_R (3<<3) /* Time on or Done and REQ */ - -#define TSI148_LCSR_VMCTRL_VFAIR (1<<2) /* VMEbus Master Fair Mode */ -#define TSI148_LCSR_VMCTRL_VREQL_M (3<<0) /* VMEbus Master Req Level Mask - */ - -/* - * VMEbus Control Register CRG+$238 - */ -#define TSI148_LCSR_VCTRL_LRE (1<<31) /* Late Retry Enable */ - -#define TSI148_LCSR_VCTRL_DLT_M (0xF<<24) /* Deadlock Timer */ -#define TSI148_LCSR_VCTRL_DLT_OFF (0<<24) /* Deadlock Timer Off */ -#define TSI148_LCSR_VCTRL_DLT_16 (1<<24) /* 16 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_32 (2<<24) /* 32 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_64 (3<<24) /* 64 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_128 (4<<24) /* 128 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_256 (5<<24) /* 256 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_512 (6<<24) /* 512 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_1024 (7<<24) /* 1024 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_2048 (8<<24) /* 2048 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_4096 (9<<24) /* 4096 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_8192 (0xA<<24) /* 8192 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_16384 (0xB<<24) /* 16384 VCLKS */ -#define TSI148_LCSR_VCTRL_DLT_32768 (0xC<<24) /* 32768 VCLKS */ - -#define TSI148_LCSR_VCTRL_NERBB (1<<20) /* No Early Release of Bus Busy - */ - -#define TSI148_LCSR_VCTRL_SRESET (1<<17) /* System Reset */ -#define TSI148_LCSR_VCTRL_LRESET (1<<16) /* Local Reset */ - -#define TSI148_LCSR_VCTRL_SFAILAI (1<<15) /* SYSFAIL Auto Slot ID */ -#define TSI148_LCSR_VCTRL_BID_M (0x1F<<8) /* Broadcast ID Mask */ - -#define TSI148_LCSR_VCTRL_ATOEN (1<<7) /* Arbiter Time-out Enable */ -#define TSI148_LCSR_VCTRL_ROBIN (1<<6) /* VMEbus Round Robin */ - -#define TSI148_LCSR_VCTRL_GTO_M (7<<0) /* VMEbus Global Time-out Mask - */ -#define TSI148_LCSR_VCTRL_GTO_8 (0<<0) /* 8 us */ -#define TSI148_LCSR_VCTRL_GTO_16 (1<<0) /* 16 us */ -#define TSI148_LCSR_VCTRL_GTO_32 (2<<0) /* 32 us */ -#define TSI148_LCSR_VCTRL_GTO_64 (3<<0) /* 64 us */ -#define TSI148_LCSR_VCTRL_GTO_128 (4<<0) /* 128 us */ -#define TSI148_LCSR_VCTRL_GTO_256 (5<<0) /* 256 us */ -#define TSI148_LCSR_VCTRL_GTO_512 (6<<0) /* 512 us */ -#define TSI148_LCSR_VCTRL_GTO_DIS (7<<0) /* Disabled */ - -/* - * VMEbus Status Register CRG + $23C - */ -#define TSI148_LCSR_VSTAT_CPURST (1<<15) /* Clear power up reset */ -#define TSI148_LCSR_VSTAT_BRDFL (1<<14) /* Board fail */ -#define TSI148_LCSR_VSTAT_PURSTS (1<<12) /* Power up reset status */ -#define TSI148_LCSR_VSTAT_BDFAILS (1<<11) /* Board Fail Status */ -#define TSI148_LCSR_VSTAT_SYSFAILS (1<<10) /* System Fail Status */ -#define TSI148_LCSR_VSTAT_ACFAILS (1<<9) /* AC fail status */ -#define TSI148_LCSR_VSTAT_SCONS (1<<8) /* System Cont Status */ -#define TSI148_LCSR_VSTAT_GAP (1<<5) /* Geographic Addr Parity */ -#define TSI148_LCSR_VSTAT_GA_M (0x1F<<0) /* Geographic Addr Mask */ - -/* - * PCI Configuration Status Register CRG+$240 - */ -#define TSI148_LCSR_PSTAT_REQ64S (1<<6) /* Request 64 status set */ -#define TSI148_LCSR_PSTAT_M66ENS (1<<5) /* M66ENS 66Mhz enable */ -#define TSI148_LCSR_PSTAT_FRAMES (1<<4) /* Frame Status */ -#define TSI148_LCSR_PSTAT_IRDYS (1<<3) /* IRDY status */ -#define TSI148_LCSR_PSTAT_DEVSELS (1<<2) /* DEVL status */ -#define TSI148_LCSR_PSTAT_STOPS (1<<1) /* STOP status */ -#define TSI148_LCSR_PSTAT_TRDYS (1<<0) /* TRDY status */ - -/* - * VMEbus Exception Attributes Register CRG + $268 - */ -#define TSI148_LCSR_VEAT_VES (1<<31) /* Status */ -#define TSI148_LCSR_VEAT_VEOF (1<<30) /* Overflow */ -#define TSI148_LCSR_VEAT_VESCL (1<<29) /* Status Clear */ -#define TSI148_LCSR_VEAT_2EOT (1<<21) /* 2e Odd Termination */ -#define TSI148_LCSR_VEAT_2EST (1<<20) /* 2e Slave terminated */ -#define TSI148_LCSR_VEAT_BERR (1<<19) /* Bus Error */ -#define TSI148_LCSR_VEAT_LWORD (1<<18) /* LWORD_ signal state */ -#define TSI148_LCSR_VEAT_WRITE (1<<17) /* WRITE_ signal state */ -#define TSI148_LCSR_VEAT_IACK (1<<16) /* IACK_ signal state */ -#define TSI148_LCSR_VEAT_DS1 (1<<15) /* DS1_ signal state */ -#define TSI148_LCSR_VEAT_DS0 (1<<14) /* DS0_ signal state */ -#define TSI148_LCSR_VEAT_AM_M (0x3F<<8) /* Address Mode Mask */ -#define TSI148_LCSR_VEAT_XAM_M (0xFF<<0) /* Master AMode Mask */ - - -/* - * VMEbus PCI Error Diagnostics PCI/X Attributes Register CRG + $280 - */ -#define TSI148_LCSR_EDPAT_EDPCL (1<<29) - -/* - * Inbound Translation Starting Address Lower - */ -#define TSI148_LCSR_ITSAL6432_M (0xFFFF<<16) /* Mask */ -#define TSI148_LCSR_ITSAL24_M (0x00FFF<<12) /* Mask */ -#define TSI148_LCSR_ITSAL16_M (0x0000FFF<<4) /* Mask */ - -/* - * Inbound Translation Ending Address Lower - */ -#define TSI148_LCSR_ITEAL6432_M (0xFFFF<<16) /* Mask */ -#define TSI148_LCSR_ITEAL24_M (0x00FFF<<12) /* Mask */ -#define TSI148_LCSR_ITEAL16_M (0x0000FFF<<4) /* Mask */ - -/* - * Inbound Translation Offset Lower - */ -#define TSI148_LCSR_ITOFFL6432_M (0xFFFF<<16) /* Mask */ -#define TSI148_LCSR_ITOFFL24_M (0xFFFFF<<12) /* Mask */ -#define TSI148_LCSR_ITOFFL16_M (0xFFFFFFF<<4) /* Mask */ - -/* - * Inbound Translation Attribute - */ -#define TSI148_LCSR_ITAT_EN (1<<31) /* Window Enable */ -#define TSI148_LCSR_ITAT_TH (1<<18) /* Prefetch Threshold */ - -#define TSI148_LCSR_ITAT_VFS_M (3<<16) /* Virtual FIFO Size Mask */ -#define TSI148_LCSR_ITAT_VFS_64 (0<<16) /* 64 bytes Virtual FIFO Size */ -#define TSI148_LCSR_ITAT_VFS_128 (1<<16) /* 128 bytes Virtual FIFO Sz */ -#define TSI148_LCSR_ITAT_VFS_256 (2<<16) /* 256 bytes Virtual FIFO Sz */ -#define TSI148_LCSR_ITAT_VFS_512 (3<<16) /* 512 bytes Virtual FIFO Sz */ - -#define TSI148_LCSR_ITAT_2eSSTM_M (7<<12) /* 2eSST Xfer Rate Mask */ -#define TSI148_LCSR_ITAT_2eSSTM_160 (0<<12) /* 160MB/s 2eSST Xfer Rate */ -#define TSI148_LCSR_ITAT_2eSSTM_267 (1<<12) /* 267MB/s 2eSST Xfer Rate */ -#define TSI148_LCSR_ITAT_2eSSTM_320 (2<<12) /* 320MB/s 2eSST Xfer Rate */ - -#define TSI148_LCSR_ITAT_2eSSTB (1<<11) /* 2eSST Bcast Xfer Protocol */ -#define TSI148_LCSR_ITAT_2eSST (1<<10) /* 2eSST Xfer Protocol */ -#define TSI148_LCSR_ITAT_2eVME (1<<9) /* 2eVME Xfer Protocol */ -#define TSI148_LCSR_ITAT_MBLT (1<<8) /* MBLT Xfer Protocol */ -#define TSI148_LCSR_ITAT_BLT (1<<7) /* BLT Xfer Protocol */ - -#define TSI148_LCSR_ITAT_AS_M (7<<4) /* Address Space Mask */ -#define TSI148_LCSR_ITAT_AS_A16 (0<<4) /* A16 Address Space */ -#define TSI148_LCSR_ITAT_AS_A24 (1<<4) /* A24 Address Space */ -#define TSI148_LCSR_ITAT_AS_A32 (2<<4) /* A32 Address Space */ -#define TSI148_LCSR_ITAT_AS_A64 (4<<4) /* A64 Address Space */ - -#define TSI148_LCSR_ITAT_SUPR (1<<3) /* Supervisor Access */ -#define TSI148_LCSR_ITAT_NPRIV (1<<2) /* Non-Priv (User) Access */ -#define TSI148_LCSR_ITAT_PGM (1<<1) /* Program Access */ -#define TSI148_LCSR_ITAT_DATA (1<<0) /* Data Access */ - -/* - * GCSR Base Address Lower Address CRG +$404 - */ -#define TSI148_LCSR_GBAL_M (0x7FFFFFF<<5) /* Mask */ - -/* - * GCSR Attribute Register CRG + $408 - */ -#define TSI148_LCSR_GCSRAT_EN (1<<7) /* Enable access to GCSR */ - -#define TSI148_LCSR_GCSRAT_AS_M (7<<4) /* Address Space Mask */ -#define TSI148_LCSR_GCSRAT_AS_A16 (0<<4) /* Address Space 16 */ -#define TSI148_LCSR_GCSRAT_AS_A24 (1<<4) /* Address Space 24 */ -#define TSI148_LCSR_GCSRAT_AS_A32 (2<<4) /* Address Space 32 */ -#define TSI148_LCSR_GCSRAT_AS_A64 (4<<4) /* Address Space 64 */ - -#define TSI148_LCSR_GCSRAT_SUPR (1<<3) /* Sup set -GCSR decoder */ -#define TSI148_LCSR_GCSRAT_NPRIV (1<<2) /* Non-Privliged set - CGSR */ -#define TSI148_LCSR_GCSRAT_PGM (1<<1) /* Program set - GCSR decoder */ -#define TSI148_LCSR_GCSRAT_DATA (1<<0) /* DATA set GCSR decoder */ - -/* - * CRG Base Address Lower Address CRG + $410 - */ -#define TSI148_LCSR_CBAL_M (0xFFFFF<<12) - -/* - * CRG Attribute Register CRG + $414 - */ -#define TSI148_LCSR_CRGAT_EN (1<<7) /* Enable PRG Access */ - -#define TSI148_LCSR_CRGAT_AS_M (7<<4) /* Address Space */ -#define TSI148_LCSR_CRGAT_AS_A16 (0<<4) /* Address Space 16 */ -#define TSI148_LCSR_CRGAT_AS_A24 (1<<4) /* Address Space 24 */ -#define TSI148_LCSR_CRGAT_AS_A32 (2<<4) /* Address Space 32 */ -#define TSI148_LCSR_CRGAT_AS_A64 (4<<4) /* Address Space 64 */ - -#define TSI148_LCSR_CRGAT_SUPR (1<<3) /* Supervisor Access */ -#define TSI148_LCSR_CRGAT_NPRIV (1<<2) /* Non-Privliged(User) Access */ -#define TSI148_LCSR_CRGAT_PGM (1<<1) /* Program Access */ -#define TSI148_LCSR_CRGAT_DATA (1<<0) /* Data Access */ - -/* - * CR/CSR Offset Lower Register CRG + $41C - */ -#define TSI148_LCSR_CROL_M (0x1FFF<<19) /* Mask */ - -/* - * CR/CSR Attribute register CRG + $420 - */ -#define TSI148_LCSR_CRAT_EN (1<<7) /* Enable access to CR/CSR */ - -/* - * Location Monitor base address lower register CRG + $428 - */ -#define TSI148_LCSR_LMBAL_M (0x7FFFFFF<<5) /* Mask */ - -/* - * Location Monitor Attribute Register CRG + $42C - */ -#define TSI148_LCSR_LMAT_EN (1<<7) /* Enable Location Monitor */ - -#define TSI148_LCSR_LMAT_AS_M (7<<4) /* Address Space MASK */ -#define TSI148_LCSR_LMAT_AS_A16 (0<<4) /* A16 */ -#define TSI148_LCSR_LMAT_AS_A24 (1<<4) /* A24 */ -#define TSI148_LCSR_LMAT_AS_A32 (2<<4) /* A32 */ -#define TSI148_LCSR_LMAT_AS_A64 (4<<4) /* A64 */ - -#define TSI148_LCSR_LMAT_SUPR (1<<3) /* Supervisor Access */ -#define TSI148_LCSR_LMAT_NPRIV (1<<2) /* Non-Priv (User) Access */ -#define TSI148_LCSR_LMAT_PGM (1<<1) /* Program Access */ -#define TSI148_LCSR_LMAT_DATA (1<<0) /* Data Access */ - -/* - * Broadcast Pulse Generator Timer Register CRG + $438 - */ -#define TSI148_LCSR_BPGTR_BPGT_M (0xFFFF<<0) /* Mask */ - -/* - * Broadcast Programmable Clock Timer Register CRG + $43C - */ -#define TSI148_LCSR_BPCTR_BPCT_M (0xFFFFFF<<0) /* Mask */ - -/* - * VMEbus Interrupt Control Register CRG + $43C - */ -#define TSI148_LCSR_VICR_CNTS_M (3<<22) /* Cntr Source MASK */ -#define TSI148_LCSR_VICR_CNTS_DIS (1<<22) /* Cntr Disable */ -#define TSI148_LCSR_VICR_CNTS_IRQ1 (2<<22) /* IRQ1 to Cntr */ -#define TSI148_LCSR_VICR_CNTS_IRQ2 (3<<22) /* IRQ2 to Cntr */ - -#define TSI148_LCSR_VICR_EDGIS_M (3<<20) /* Edge interrupt MASK */ -#define TSI148_LCSR_VICR_EDGIS_DIS (1<<20) /* Edge interrupt Disable */ -#define TSI148_LCSR_VICR_EDGIS_IRQ1 (2<<20) /* IRQ1 to Edge */ -#define TSI148_LCSR_VICR_EDGIS_IRQ2 (3<<20) /* IRQ2 to Edge */ - -#define TSI148_LCSR_VICR_IRQIF_M (3<<18) /* IRQ1* Function MASK */ -#define TSI148_LCSR_VICR_IRQIF_NORM (1<<18) /* Normal */ -#define TSI148_LCSR_VICR_IRQIF_PULSE (2<<18) /* Pulse Generator */ -#define TSI148_LCSR_VICR_IRQIF_PROG (3<<18) /* Programmable Clock */ -#define TSI148_LCSR_VICR_IRQIF_1U (4<<18) /* 1us Clock */ - -#define TSI148_LCSR_VICR_IRQ2F_M (3<<16) /* IRQ2* Function MASK */ -#define TSI148_LCSR_VICR_IRQ2F_NORM (1<<16) /* Normal */ -#define TSI148_LCSR_VICR_IRQ2F_PULSE (2<<16) /* Pulse Generator */ -#define TSI148_LCSR_VICR_IRQ2F_PROG (3<<16) /* Programmable Clock */ -#define TSI148_LCSR_VICR_IRQ2F_1U (4<<16) /* 1us Clock */ - -#define TSI148_LCSR_VICR_BIP (1<<15) /* Broadcast Interrupt Pulse */ - -#define TSI148_LCSR_VICR_IRQC (1<<12) /* VMEbus IRQ Clear */ -#define TSI148_LCSR_VICR_IRQS (1<<11) /* VMEbus IRQ Status */ - -#define TSI148_LCSR_VICR_IRQL_M (7<<8) /* VMEbus SW IRQ Level Mask */ -#define TSI148_LCSR_VICR_IRQL_1 (1<<8) /* VMEbus SW IRQ Level 1 */ -#define TSI148_LCSR_VICR_IRQL_2 (2<<8) /* VMEbus SW IRQ Level 2 */ -#define TSI148_LCSR_VICR_IRQL_3 (3<<8) /* VMEbus SW IRQ Level 3 */ -#define TSI148_LCSR_VICR_IRQL_4 (4<<8) /* VMEbus SW IRQ Level 4 */ -#define TSI148_LCSR_VICR_IRQL_5 (5<<8) /* VMEbus SW IRQ Level 5 */ -#define TSI148_LCSR_VICR_IRQL_6 (6<<8) /* VMEbus SW IRQ Level 6 */ -#define TSI148_LCSR_VICR_IRQL_7 (7<<8) /* VMEbus SW IRQ Level 7 */ - -static const int TSI148_LCSR_VICR_IRQL[8] = { 0, TSI148_LCSR_VICR_IRQL_1, - TSI148_LCSR_VICR_IRQL_2, TSI148_LCSR_VICR_IRQL_3, - TSI148_LCSR_VICR_IRQL_4, TSI148_LCSR_VICR_IRQL_5, - TSI148_LCSR_VICR_IRQL_6, TSI148_LCSR_VICR_IRQL_7 }; - -#define TSI148_LCSR_VICR_STID_M (0xFF<<0) /* Status/ID Mask */ - -/* - * Interrupt Enable Register CRG + $440 - */ -#define TSI148_LCSR_INTEN_DMA1EN (1<<25) /* DMAC 1 */ -#define TSI148_LCSR_INTEN_DMA0EN (1<<24) /* DMAC 0 */ -#define TSI148_LCSR_INTEN_LM3EN (1<<23) /* Location Monitor 3 */ -#define TSI148_LCSR_INTEN_LM2EN (1<<22) /* Location Monitor 2 */ -#define TSI148_LCSR_INTEN_LM1EN (1<<21) /* Location Monitor 1 */ -#define TSI148_LCSR_INTEN_LM0EN (1<<20) /* Location Monitor 0 */ -#define TSI148_LCSR_INTEN_MB3EN (1<<19) /* Mail Box 3 */ -#define TSI148_LCSR_INTEN_MB2EN (1<<18) /* Mail Box 2 */ -#define TSI148_LCSR_INTEN_MB1EN (1<<17) /* Mail Box 1 */ -#define TSI148_LCSR_INTEN_MB0EN (1<<16) /* Mail Box 0 */ -#define TSI148_LCSR_INTEN_PERREN (1<<13) /* PCI/X Error */ -#define TSI148_LCSR_INTEN_VERREN (1<<12) /* VMEbus Error */ -#define TSI148_LCSR_INTEN_VIEEN (1<<11) /* VMEbus IRQ Edge */ -#define TSI148_LCSR_INTEN_IACKEN (1<<10) /* IACK */ -#define TSI148_LCSR_INTEN_SYSFLEN (1<<9) /* System Fail */ -#define TSI148_LCSR_INTEN_ACFLEN (1<<8) /* AC Fail */ -#define TSI148_LCSR_INTEN_IRQ7EN (1<<7) /* IRQ7 */ -#define TSI148_LCSR_INTEN_IRQ6EN (1<<6) /* IRQ6 */ -#define TSI148_LCSR_INTEN_IRQ5EN (1<<5) /* IRQ5 */ -#define TSI148_LCSR_INTEN_IRQ4EN (1<<4) /* IRQ4 */ -#define TSI148_LCSR_INTEN_IRQ3EN (1<<3) /* IRQ3 */ -#define TSI148_LCSR_INTEN_IRQ2EN (1<<2) /* IRQ2 */ -#define TSI148_LCSR_INTEN_IRQ1EN (1<<1) /* IRQ1 */ - -static const int TSI148_LCSR_INTEN_LMEN[4] = { TSI148_LCSR_INTEN_LM0EN, - TSI148_LCSR_INTEN_LM1EN, - TSI148_LCSR_INTEN_LM2EN, - TSI148_LCSR_INTEN_LM3EN }; - -static const int TSI148_LCSR_INTEN_IRQEN[7] = { TSI148_LCSR_INTEN_IRQ1EN, - TSI148_LCSR_INTEN_IRQ2EN, - TSI148_LCSR_INTEN_IRQ3EN, - TSI148_LCSR_INTEN_IRQ4EN, - TSI148_LCSR_INTEN_IRQ5EN, - TSI148_LCSR_INTEN_IRQ6EN, - TSI148_LCSR_INTEN_IRQ7EN }; - -/* - * Interrupt Enable Out Register CRG + $444 - */ -#define TSI148_LCSR_INTEO_DMA1EO (1<<25) /* DMAC 1 */ -#define TSI148_LCSR_INTEO_DMA0EO (1<<24) /* DMAC 0 */ -#define TSI148_LCSR_INTEO_LM3EO (1<<23) /* Loc Monitor 3 */ -#define TSI148_LCSR_INTEO_LM2EO (1<<22) /* Loc Monitor 2 */ -#define TSI148_LCSR_INTEO_LM1EO (1<<21) /* Loc Monitor 1 */ -#define TSI148_LCSR_INTEO_LM0EO (1<<20) /* Location Monitor 0 */ -#define TSI148_LCSR_INTEO_MB3EO (1<<19) /* Mail Box 3 */ -#define TSI148_LCSR_INTEO_MB2EO (1<<18) /* Mail Box 2 */ -#define TSI148_LCSR_INTEO_MB1EO (1<<17) /* Mail Box 1 */ -#define TSI148_LCSR_INTEO_MB0EO (1<<16) /* Mail Box 0 */ -#define TSI148_LCSR_INTEO_PERREO (1<<13) /* PCI/X Error */ -#define TSI148_LCSR_INTEO_VERREO (1<<12) /* VMEbus Error */ -#define TSI148_LCSR_INTEO_VIEEO (1<<11) /* VMEbus IRQ Edge */ -#define TSI148_LCSR_INTEO_IACKEO (1<<10) /* IACK */ -#define TSI148_LCSR_INTEO_SYSFLEO (1<<9) /* System Fail */ -#define TSI148_LCSR_INTEO_ACFLEO (1<<8) /* AC Fail */ -#define TSI148_LCSR_INTEO_IRQ7EO (1<<7) /* IRQ7 */ -#define TSI148_LCSR_INTEO_IRQ6EO (1<<6) /* IRQ6 */ -#define TSI148_LCSR_INTEO_IRQ5EO (1<<5) /* IRQ5 */ -#define TSI148_LCSR_INTEO_IRQ4EO (1<<4) /* IRQ4 */ -#define TSI148_LCSR_INTEO_IRQ3EO (1<<3) /* IRQ3 */ -#define TSI148_LCSR_INTEO_IRQ2EO (1<<2) /* IRQ2 */ -#define TSI148_LCSR_INTEO_IRQ1EO (1<<1) /* IRQ1 */ - -static const int TSI148_LCSR_INTEO_LMEO[4] = { TSI148_LCSR_INTEO_LM0EO, - TSI148_LCSR_INTEO_LM1EO, - TSI148_LCSR_INTEO_LM2EO, - TSI148_LCSR_INTEO_LM3EO }; - -static const int TSI148_LCSR_INTEO_IRQEO[7] = { TSI148_LCSR_INTEO_IRQ1EO, - TSI148_LCSR_INTEO_IRQ2EO, - TSI148_LCSR_INTEO_IRQ3EO, - TSI148_LCSR_INTEO_IRQ4EO, - TSI148_LCSR_INTEO_IRQ5EO, - TSI148_LCSR_INTEO_IRQ6EO, - TSI148_LCSR_INTEO_IRQ7EO }; - -/* - * Interrupt Status Register CRG + $448 - */ -#define TSI148_LCSR_INTS_DMA1S (1<<25) /* DMA 1 */ -#define TSI148_LCSR_INTS_DMA0S (1<<24) /* DMA 0 */ -#define TSI148_LCSR_INTS_LM3S (1<<23) /* Location Monitor 3 */ -#define TSI148_LCSR_INTS_LM2S (1<<22) /* Location Monitor 2 */ -#define TSI148_LCSR_INTS_LM1S (1<<21) /* Location Monitor 1 */ -#define TSI148_LCSR_INTS_LM0S (1<<20) /* Location Monitor 0 */ -#define TSI148_LCSR_INTS_MB3S (1<<19) /* Mail Box 3 */ -#define TSI148_LCSR_INTS_MB2S (1<<18) /* Mail Box 2 */ -#define TSI148_LCSR_INTS_MB1S (1<<17) /* Mail Box 1 */ -#define TSI148_LCSR_INTS_MB0S (1<<16) /* Mail Box 0 */ -#define TSI148_LCSR_INTS_PERRS (1<<13) /* PCI/X Error */ -#define TSI148_LCSR_INTS_VERRS (1<<12) /* VMEbus Error */ -#define TSI148_LCSR_INTS_VIES (1<<11) /* VMEbus IRQ Edge */ -#define TSI148_LCSR_INTS_IACKS (1<<10) /* IACK */ -#define TSI148_LCSR_INTS_SYSFLS (1<<9) /* System Fail */ -#define TSI148_LCSR_INTS_ACFLS (1<<8) /* AC Fail */ -#define TSI148_LCSR_INTS_IRQ7S (1<<7) /* IRQ7 */ -#define TSI148_LCSR_INTS_IRQ6S (1<<6) /* IRQ6 */ -#define TSI148_LCSR_INTS_IRQ5S (1<<5) /* IRQ5 */ -#define TSI148_LCSR_INTS_IRQ4S (1<<4) /* IRQ4 */ -#define TSI148_LCSR_INTS_IRQ3S (1<<3) /* IRQ3 */ -#define TSI148_LCSR_INTS_IRQ2S (1<<2) /* IRQ2 */ -#define TSI148_LCSR_INTS_IRQ1S (1<<1) /* IRQ1 */ - -static const int TSI148_LCSR_INTS_LMS[4] = { TSI148_LCSR_INTS_LM0S, - TSI148_LCSR_INTS_LM1S, - TSI148_LCSR_INTS_LM2S, - TSI148_LCSR_INTS_LM3S }; - -static const int TSI148_LCSR_INTS_MBS[4] = { TSI148_LCSR_INTS_MB0S, - TSI148_LCSR_INTS_MB1S, - TSI148_LCSR_INTS_MB2S, - TSI148_LCSR_INTS_MB3S }; - -/* - * Interrupt Clear Register CRG + $44C - */ -#define TSI148_LCSR_INTC_DMA1C (1<<25) /* DMA 1 */ -#define TSI148_LCSR_INTC_DMA0C (1<<24) /* DMA 0 */ -#define TSI148_LCSR_INTC_LM3C (1<<23) /* Location Monitor 3 */ -#define TSI148_LCSR_INTC_LM2C (1<<22) /* Location Monitor 2 */ -#define TSI148_LCSR_INTC_LM1C (1<<21) /* Location Monitor 1 */ -#define TSI148_LCSR_INTC_LM0C (1<<20) /* Location Monitor 0 */ -#define TSI148_LCSR_INTC_MB3C (1<<19) /* Mail Box 3 */ -#define TSI148_LCSR_INTC_MB2C (1<<18) /* Mail Box 2 */ -#define TSI148_LCSR_INTC_MB1C (1<<17) /* Mail Box 1 */ -#define TSI148_LCSR_INTC_MB0C (1<<16) /* Mail Box 0 */ -#define TSI148_LCSR_INTC_PERRC (1<<13) /* VMEbus Error */ -#define TSI148_LCSR_INTC_VERRC (1<<12) /* VMEbus Access Time-out */ -#define TSI148_LCSR_INTC_VIEC (1<<11) /* VMEbus IRQ Edge */ -#define TSI148_LCSR_INTC_IACKC (1<<10) /* IACK */ -#define TSI148_LCSR_INTC_SYSFLC (1<<9) /* System Fail */ -#define TSI148_LCSR_INTC_ACFLC (1<<8) /* AC Fail */ - -static const int TSI148_LCSR_INTC_LMC[4] = { TSI148_LCSR_INTC_LM0C, - TSI148_LCSR_INTC_LM1C, - TSI148_LCSR_INTC_LM2C, - TSI148_LCSR_INTC_LM3C }; - -static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C, - TSI148_LCSR_INTC_MB1C, - TSI148_LCSR_INTC_MB2C, - TSI148_LCSR_INTC_MB3C }; - -/* - * Interrupt Map Register 1 CRG + $458 - */ -#define TSI148_LCSR_INTM1_DMA1M_M (3<<18) /* DMA 1 */ -#define TSI148_LCSR_INTM1_DMA0M_M (3<<16) /* DMA 0 */ -#define TSI148_LCSR_INTM1_LM3M_M (3<<14) /* Location Monitor 3 */ -#define TSI148_LCSR_INTM1_LM2M_M (3<<12) /* Location Monitor 2 */ -#define TSI148_LCSR_INTM1_LM1M_M (3<<10) /* Location Monitor 1 */ -#define TSI148_LCSR_INTM1_LM0M_M (3<<8) /* Location Monitor 0 */ -#define TSI148_LCSR_INTM1_MB3M_M (3<<6) /* Mail Box 3 */ -#define TSI148_LCSR_INTM1_MB2M_M (3<<4) /* Mail Box 2 */ -#define TSI148_LCSR_INTM1_MB1M_M (3<<2) /* Mail Box 1 */ -#define TSI148_LCSR_INTM1_MB0M_M (3<<0) /* Mail Box 0 */ - -/* - * Interrupt Map Register 2 CRG + $45C - */ -#define TSI148_LCSR_INTM2_PERRM_M (3<<26) /* PCI Bus Error */ -#define TSI148_LCSR_INTM2_VERRM_M (3<<24) /* VMEbus Error */ -#define TSI148_LCSR_INTM2_VIEM_M (3<<22) /* VMEbus IRQ Edge */ -#define TSI148_LCSR_INTM2_IACKM_M (3<<20) /* IACK */ -#define TSI148_LCSR_INTM2_SYSFLM_M (3<<18) /* System Fail */ -#define TSI148_LCSR_INTM2_ACFLM_M (3<<16) /* AC Fail */ -#define TSI148_LCSR_INTM2_IRQ7M_M (3<<14) /* IRQ7 */ -#define TSI148_LCSR_INTM2_IRQ6M_M (3<<12) /* IRQ6 */ -#define TSI148_LCSR_INTM2_IRQ5M_M (3<<10) /* IRQ5 */ -#define TSI148_LCSR_INTM2_IRQ4M_M (3<<8) /* IRQ4 */ -#define TSI148_LCSR_INTM2_IRQ3M_M (3<<6) /* IRQ3 */ -#define TSI148_LCSR_INTM2_IRQ2M_M (3<<4) /* IRQ2 */ -#define TSI148_LCSR_INTM2_IRQ1M_M (3<<2) /* IRQ1 */ - -/* - * DMA Control (0-1) Registers CRG + $500 - */ -#define TSI148_LCSR_DCTL_ABT (1<<27) /* Abort */ -#define TSI148_LCSR_DCTL_PAU (1<<26) /* Pause */ -#define TSI148_LCSR_DCTL_DGO (1<<25) /* DMA Go */ - -#define TSI148_LCSR_DCTL_MOD (1<<23) /* Mode */ - -#define TSI148_LCSR_DCTL_VBKS_M (7<<12) /* VMEbus block Size MASK */ -#define TSI148_LCSR_DCTL_VBKS_32 (0<<12) /* VMEbus block Size 32 */ -#define TSI148_LCSR_DCTL_VBKS_64 (1<<12) /* VMEbus block Size 64 */ -#define TSI148_LCSR_DCTL_VBKS_128 (2<<12) /* VMEbus block Size 128 */ -#define TSI148_LCSR_DCTL_VBKS_256 (3<<12) /* VMEbus block Size 256 */ -#define TSI148_LCSR_DCTL_VBKS_512 (4<<12) /* VMEbus block Size 512 */ -#define TSI148_LCSR_DCTL_VBKS_1024 (5<<12) /* VMEbus block Size 1024 */ -#define TSI148_LCSR_DCTL_VBKS_2048 (6<<12) /* VMEbus block Size 2048 */ -#define TSI148_LCSR_DCTL_VBKS_4096 (7<<12) /* VMEbus block Size 4096 */ - -#define TSI148_LCSR_DCTL_VBOT_M (7<<8) /* VMEbus back-off MASK */ -#define TSI148_LCSR_DCTL_VBOT_0 (0<<8) /* VMEbus back-off 0us */ -#define TSI148_LCSR_DCTL_VBOT_1 (1<<8) /* VMEbus back-off 1us */ -#define TSI148_LCSR_DCTL_VBOT_2 (2<<8) /* VMEbus back-off 2us */ -#define TSI148_LCSR_DCTL_VBOT_4 (3<<8) /* VMEbus back-off 4us */ -#define TSI148_LCSR_DCTL_VBOT_8 (4<<8) /* VMEbus back-off 8us */ -#define TSI148_LCSR_DCTL_VBOT_16 (5<<8) /* VMEbus back-off 16us */ -#define TSI148_LCSR_DCTL_VBOT_32 (6<<8) /* VMEbus back-off 32us */ -#define TSI148_LCSR_DCTL_VBOT_64 (7<<8) /* VMEbus back-off 64us */ - -#define TSI148_LCSR_DCTL_PBKS_M (7<<4) /* PCI block size MASK */ -#define TSI148_LCSR_DCTL_PBKS_32 (0<<4) /* PCI block size 32 bytes */ -#define TSI148_LCSR_DCTL_PBKS_64 (1<<4) /* PCI block size 64 bytes */ -#define TSI148_LCSR_DCTL_PBKS_128 (2<<4) /* PCI block size 128 bytes */ -#define TSI148_LCSR_DCTL_PBKS_256 (3<<4) /* PCI block size 256 bytes */ -#define TSI148_LCSR_DCTL_PBKS_512 (4<<4) /* PCI block size 512 bytes */ -#define TSI148_LCSR_DCTL_PBKS_1024 (5<<4) /* PCI block size 1024 bytes */ -#define TSI148_LCSR_DCTL_PBKS_2048 (6<<4) /* PCI block size 2048 bytes */ -#define TSI148_LCSR_DCTL_PBKS_4096 (7<<4) /* PCI block size 4096 bytes */ - -#define TSI148_LCSR_DCTL_PBOT_M (7<<0) /* PCI back off MASK */ -#define TSI148_LCSR_DCTL_PBOT_0 (0<<0) /* PCI back off 0us */ -#define TSI148_LCSR_DCTL_PBOT_1 (1<<0) /* PCI back off 1us */ -#define TSI148_LCSR_DCTL_PBOT_2 (2<<0) /* PCI back off 2us */ -#define TSI148_LCSR_DCTL_PBOT_4 (3<<0) /* PCI back off 3us */ -#define TSI148_LCSR_DCTL_PBOT_8 (4<<0) /* PCI back off 4us */ -#define TSI148_LCSR_DCTL_PBOT_16 (5<<0) /* PCI back off 8us */ -#define TSI148_LCSR_DCTL_PBOT_32 (6<<0) /* PCI back off 16us */ -#define TSI148_LCSR_DCTL_PBOT_64 (7<<0) /* PCI back off 32us */ - -/* - * DMA Status Registers (0-1) CRG + $504 - */ -#define TSI148_LCSR_DSTA_SMA (1<<31) /* PCI Signalled Master Abt */ -#define TSI148_LCSR_DSTA_RTA (1<<30) /* PCI Received Target Abt */ -#define TSI148_LCSR_DSTA_MRC (1<<29) /* PCI Max Retry Count */ -#define TSI148_LCSR_DSTA_VBE (1<<28) /* VMEbus error */ -#define TSI148_LCSR_DSTA_ABT (1<<27) /* Abort */ -#define TSI148_LCSR_DSTA_PAU (1<<26) /* Pause */ -#define TSI148_LCSR_DSTA_DON (1<<25) /* Done */ -#define TSI148_LCSR_DSTA_BSY (1<<24) /* Busy */ - -/* - * DMA Current Link Address Lower (0-1) - */ -#define TSI148_LCSR_DCLAL_M (0x3FFFFFF<<6) /* Mask */ - -/* - * DMA Source Attribute (0-1) Reg - */ -#define TSI148_LCSR_DSAT_TYP_M (3<<28) /* Source Bus Type */ -#define TSI148_LCSR_DSAT_TYP_PCI (0<<28) /* PCI Bus */ -#define TSI148_LCSR_DSAT_TYP_VME (1<<28) /* VMEbus */ -#define TSI148_LCSR_DSAT_TYP_PAT (2<<28) /* Data Pattern */ - -#define TSI148_LCSR_DSAT_PSZ (1<<25) /* Pattern Size */ -#define TSI148_LCSR_DSAT_NIN (1<<24) /* No Increment */ - -#define TSI148_LCSR_DSAT_2eSSTM_M (3<<11) /* 2eSST Trans Rate Mask */ -#define TSI148_LCSR_DSAT_2eSSTM_160 (0<<11) /* 160 MB/s */ -#define TSI148_LCSR_DSAT_2eSSTM_267 (1<<11) /* 267 MB/s */ -#define TSI148_LCSR_DSAT_2eSSTM_320 (2<<11) /* 320 MB/s */ - -#define TSI148_LCSR_DSAT_TM_M (7<<8) /* Bus Transfer Protocol Mask */ -#define TSI148_LCSR_DSAT_TM_SCT (0<<8) /* SCT */ -#define TSI148_LCSR_DSAT_TM_BLT (1<<8) /* BLT */ -#define TSI148_LCSR_DSAT_TM_MBLT (2<<8) /* MBLT */ -#define TSI148_LCSR_DSAT_TM_2eVME (3<<8) /* 2eVME */ -#define TSI148_LCSR_DSAT_TM_2eSST (4<<8) /* 2eSST */ -#define TSI148_LCSR_DSAT_TM_2eSSTB (5<<8) /* 2eSST Broadcast */ - -#define TSI148_LCSR_DSAT_DBW_M (3<<6) /* Max Data Width MASK */ -#define TSI148_LCSR_DSAT_DBW_16 (0<<6) /* 16 Bits */ -#define TSI148_LCSR_DSAT_DBW_32 (1<<6) /* 32 Bits */ - -#define TSI148_LCSR_DSAT_SUP (1<<5) /* Supervisory Mode */ -#define TSI148_LCSR_DSAT_PGM (1<<4) /* Program Mode */ - -#define TSI148_LCSR_DSAT_AMODE_M (0xf<<0) /* Address Space Mask */ -#define TSI148_LCSR_DSAT_AMODE_A16 (0<<0) /* A16 */ -#define TSI148_LCSR_DSAT_AMODE_A24 (1<<0) /* A24 */ -#define TSI148_LCSR_DSAT_AMODE_A32 (2<<0) /* A32 */ -#define TSI148_LCSR_DSAT_AMODE_A64 (4<<0) /* A64 */ -#define TSI148_LCSR_DSAT_AMODE_CRCSR (5<<0) /* CR/CSR */ -#define TSI148_LCSR_DSAT_AMODE_USER1 (8<<0) /* User1 */ -#define TSI148_LCSR_DSAT_AMODE_USER2 (9<<0) /* User2 */ -#define TSI148_LCSR_DSAT_AMODE_USER3 (0xa<<0) /* User3 */ -#define TSI148_LCSR_DSAT_AMODE_USER4 (0xb<<0) /* User4 */ - -/* - * DMA Destination Attribute Registers (0-1) - */ -#define TSI148_LCSR_DDAT_TYP_PCI (0<<28) /* Destination PCI Bus */ -#define TSI148_LCSR_DDAT_TYP_VME (1<<28) /* Destination VMEbus */ - -#define TSI148_LCSR_DDAT_2eSSTM_M (3<<11) /* 2eSST Transfer Rate Mask */ -#define TSI148_LCSR_DDAT_2eSSTM_160 (0<<11) /* 160 MB/s */ -#define TSI148_LCSR_DDAT_2eSSTM_267 (1<<11) /* 267 MB/s */ -#define TSI148_LCSR_DDAT_2eSSTM_320 (2<<11) /* 320 MB/s */ - -#define TSI148_LCSR_DDAT_TM_M (7<<8) /* Bus Transfer Protocol Mask */ -#define TSI148_LCSR_DDAT_TM_SCT (0<<8) /* SCT */ -#define TSI148_LCSR_DDAT_TM_BLT (1<<8) /* BLT */ -#define TSI148_LCSR_DDAT_TM_MBLT (2<<8) /* MBLT */ -#define TSI148_LCSR_DDAT_TM_2eVME (3<<8) /* 2eVME */ -#define TSI148_LCSR_DDAT_TM_2eSST (4<<8) /* 2eSST */ -#define TSI148_LCSR_DDAT_TM_2eSSTB (5<<8) /* 2eSST Broadcast */ - -#define TSI148_LCSR_DDAT_DBW_M (3<<6) /* Max Data Width MASK */ -#define TSI148_LCSR_DDAT_DBW_16 (0<<6) /* 16 Bits */ -#define TSI148_LCSR_DDAT_DBW_32 (1<<6) /* 32 Bits */ - -#define TSI148_LCSR_DDAT_SUP (1<<5) /* Supervisory/User Access */ -#define TSI148_LCSR_DDAT_PGM (1<<4) /* Program/Data Access */ - -#define TSI148_LCSR_DDAT_AMODE_M (0xf<<0) /* Address Space Mask */ -#define TSI148_LCSR_DDAT_AMODE_A16 (0<<0) /* A16 */ -#define TSI148_LCSR_DDAT_AMODE_A24 (1<<0) /* A24 */ -#define TSI148_LCSR_DDAT_AMODE_A32 (2<<0) /* A32 */ -#define TSI148_LCSR_DDAT_AMODE_A64 (4<<0) /* A64 */ -#define TSI148_LCSR_DDAT_AMODE_CRCSR (5<<0) /* CRC/SR */ -#define TSI148_LCSR_DDAT_AMODE_USER1 (8<<0) /* User1 */ -#define TSI148_LCSR_DDAT_AMODE_USER2 (9<<0) /* User2 */ -#define TSI148_LCSR_DDAT_AMODE_USER3 (0xa<<0) /* User3 */ -#define TSI148_LCSR_DDAT_AMODE_USER4 (0xb<<0) /* User4 */ - -/* - * DMA Next Link Address Lower - */ -#define TSI148_LCSR_DNLAL_DNLAL_M (0x3FFFFFF<<6) /* Address Mask */ -#define TSI148_LCSR_DNLAL_LLA (1<<0) /* Last Link Address Indicator */ - -/* - * DMA 2eSST Broadcast Select - */ -#define TSI148_LCSR_DBS_M (0x1FFFFF<<0) /* Mask */ - -/* - * GCSR Register Group - */ - -/* - * GCSR Control and Status Register CRG + $604 - */ -#define TSI148_GCSR_GCTRL_LRST (1<<15) /* Local Reset */ -#define TSI148_GCSR_GCTRL_SFAILEN (1<<14) /* System Fail enable */ -#define TSI148_GCSR_GCTRL_BDFAILS (1<<13) /* Board Fail Status */ -#define TSI148_GCSR_GCTRL_SCON (1<<12) /* System Copntroller */ -#define TSI148_GCSR_GCTRL_MEN (1<<11) /* Module Enable (READY) */ - -#define TSI148_GCSR_GCTRL_LMI3S (1<<7) /* Loc Monitor 3 Int Status */ -#define TSI148_GCSR_GCTRL_LMI2S (1<<6) /* Loc Monitor 2 Int Status */ -#define TSI148_GCSR_GCTRL_LMI1S (1<<5) /* Loc Monitor 1 Int Status */ -#define TSI148_GCSR_GCTRL_LMI0S (1<<4) /* Loc Monitor 0 Int Status */ -#define TSI148_GCSR_GCTRL_MBI3S (1<<3) /* Mail box 3 Int Status */ -#define TSI148_GCSR_GCTRL_MBI2S (1<<2) /* Mail box 2 Int Status */ -#define TSI148_GCSR_GCTRL_MBI1S (1<<1) /* Mail box 1 Int Status */ -#define TSI148_GCSR_GCTRL_MBI0S (1<<0) /* Mail box 0 Int Status */ - -#define TSI148_GCSR_GAP (1<<5) /* Geographic Addr Parity */ -#define TSI148_GCSR_GA_M (0x1F<<0) /* Geographic Address Mask */ - -/* - * CR/CSR Register Group - */ - -/* - * CR/CSR Bit Clear Register CRG + $FF4 - */ -#define TSI148_CRCSR_CSRBCR_LRSTC (1<<7) /* Local Reset Clear */ -#define TSI148_CRCSR_CSRBCR_SFAILC (1<<6) /* System Fail Enable Clear */ -#define TSI148_CRCSR_CSRBCR_BDFAILS (1<<5) /* Board Fail Status */ -#define TSI148_CRCSR_CSRBCR_MENC (1<<4) /* Module Enable Clear */ -#define TSI148_CRCSR_CSRBCR_BERRSC (1<<3) /* Bus Error Status Clear */ - -/* - * CR/CSR Bit Set Register CRG+$FF8 - */ -#define TSI148_CRCSR_CSRBSR_LISTS (1<<7) /* Local Reset Clear */ -#define TSI148_CRCSR_CSRBSR_SFAILS (1<<6) /* System Fail Enable Clear */ -#define TSI148_CRCSR_CSRBSR_BDFAILS (1<<5) /* Board Fail Status */ -#define TSI148_CRCSR_CSRBSR_MENS (1<<4) /* Module Enable Clear */ -#define TSI148_CRCSR_CSRBSR_BERRS (1<<3) /* Bus Error Status Clear */ - -/* - * CR/CSR Base Address Register CRG + FFC - */ -#define TSI148_CRCSR_CBAR_M (0x1F<<3) /* Mask */ - -#endif /* TSI148_H */ diff --git a/drivers/vme/vme.c b/drivers/vme/vme.c deleted file mode 100644 index 8dba20186be3..000000000000 --- a/drivers/vme/vme.c +++ /dev/null @@ -1,2015 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * VME Bridge Framework - * - * Author: Martyn Welch <martyn.welch@ge.com> - * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. - * - * Based on work by Tom Armistead and Ajit Prem - * Copyright 2004 Motorola Inc. - */ - -#include <linux/init.h> -#include <linux/export.h> -#include <linux/mm.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/poll.h> -#include <linux/highmem.h> -#include <linux/interrupt.h> -#include <linux/pagemap.h> -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <linux/syscalls.h> -#include <linux/mutex.h> -#include <linux/spinlock.h> -#include <linux/slab.h> -#include <linux/vme.h> - -#include "vme_bridge.h" - -/* Bitmask and list of registered buses both protected by common mutex */ -static unsigned int vme_bus_numbers; -static LIST_HEAD(vme_bus_list); -static DEFINE_MUTEX(vme_buses_lock); - -static int __init vme_init(void); - -static struct vme_dev *dev_to_vme_dev(struct device *dev) -{ - return container_of(dev, struct vme_dev, dev); -} - -/* - * Find the bridge that the resource is associated with. - */ -static struct vme_bridge *find_bridge(struct vme_resource *resource) -{ - /* Get list to search */ - switch (resource->type) { - case VME_MASTER: - return list_entry(resource->entry, struct vme_master_resource, - list)->parent; - case VME_SLAVE: - return list_entry(resource->entry, struct vme_slave_resource, - list)->parent; - case VME_DMA: - return list_entry(resource->entry, struct vme_dma_resource, - list)->parent; - case VME_LM: - return list_entry(resource->entry, struct vme_lm_resource, - list)->parent; - default: - printk(KERN_ERR "Unknown resource type\n"); - return NULL; - } -} - -/** - * vme_alloc_consistent - Allocate contiguous memory. - * @resource: Pointer to VME resource. - * @size: Size of allocation required. - * @dma: Pointer to variable to store physical address of allocation. - * - * Allocate a contiguous block of memory for use by the driver. This is used to - * create the buffers for the slave windows. - * - * Return: Virtual address of allocation on success, NULL on failure. - */ -void *vme_alloc_consistent(struct vme_resource *resource, size_t size, - dma_addr_t *dma) -{ - struct vme_bridge *bridge; - - if (!resource) { - printk(KERN_ERR "No resource\n"); - return NULL; - } - - bridge = find_bridge(resource); - if (!bridge) { - printk(KERN_ERR "Can't find bridge\n"); - return NULL; - } - - if (!bridge->parent) { - printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name); - return NULL; - } - - if (!bridge->alloc_consistent) { - printk(KERN_ERR "alloc_consistent not supported by bridge %s\n", - bridge->name); - return NULL; - } - - return bridge->alloc_consistent(bridge->parent, size, dma); -} -EXPORT_SYMBOL(vme_alloc_consistent); - -/** - * vme_free_consistent - Free previously allocated memory. - * @resource: Pointer to VME resource. - * @size: Size of allocation to free. - * @vaddr: Virtual address of allocation. - * @dma: Physical address of allocation. - * - * Free previously allocated block of contiguous memory. - */ -void vme_free_consistent(struct vme_resource *resource, size_t size, - void *vaddr, dma_addr_t dma) -{ - struct vme_bridge *bridge; - - if (!resource) { - printk(KERN_ERR "No resource\n"); - return; - } - - bridge = find_bridge(resource); - if (!bridge) { - printk(KERN_ERR "Can't find bridge\n"); - return; - } - - if (!bridge->parent) { - printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name); - return; - } - - if (!bridge->free_consistent) { - printk(KERN_ERR "free_consistent not supported by bridge %s\n", - bridge->name); - return; - } - - bridge->free_consistent(bridge->parent, size, vaddr, dma); -} -EXPORT_SYMBOL(vme_free_consistent); - -/** - * vme_get_size - Helper function returning size of a VME window - * @resource: Pointer to VME slave or master resource. - * - * Determine the size of the VME window provided. This is a helper - * function, wrappering the call to vme_master_get or vme_slave_get - * depending on the type of window resource handed to it. - * - * Return: Size of the window on success, zero on failure. - */ -size_t vme_get_size(struct vme_resource *resource) -{ - int enabled, retval; - unsigned long long base, size; - dma_addr_t buf_base; - u32 aspace, cycle, dwidth; - - switch (resource->type) { - case VME_MASTER: - retval = vme_master_get(resource, &enabled, &base, &size, - &aspace, &cycle, &dwidth); - if (retval) - return 0; - - return size; - case VME_SLAVE: - retval = vme_slave_get(resource, &enabled, &base, &size, - &buf_base, &aspace, &cycle); - if (retval) - return 0; - - return size; - case VME_DMA: - return 0; - default: - printk(KERN_ERR "Unknown resource type\n"); - return 0; - } -} -EXPORT_SYMBOL(vme_get_size); - -int vme_check_window(u32 aspace, unsigned long long vme_base, - unsigned long long size) -{ - int retval = 0; - - if (vme_base + size < size) - return -EINVAL; - - switch (aspace) { - case VME_A16: - if (vme_base + size > VME_A16_MAX) - retval = -EFAULT; - break; - case VME_A24: - if (vme_base + size > VME_A24_MAX) - retval = -EFAULT; - break; - case VME_A32: - if (vme_base + size > VME_A32_MAX) - retval = -EFAULT; - break; - case VME_A64: - /* The VME_A64_MAX limit is actually U64_MAX + 1 */ - break; - case VME_CRCSR: - if (vme_base + size > VME_CRCSR_MAX) - retval = -EFAULT; - break; - case VME_USER1: - case VME_USER2: - case VME_USER3: - case VME_USER4: - /* User Defined */ - break; - default: - printk(KERN_ERR "Invalid address space\n"); - retval = -EINVAL; - break; - } - - return retval; -} -EXPORT_SYMBOL(vme_check_window); - -static u32 vme_get_aspace(int am) -{ - switch (am) { - case 0x29: - case 0x2D: - return VME_A16; - case 0x38: - case 0x39: - case 0x3A: - case 0x3B: - case 0x3C: - case 0x3D: - case 0x3E: - case 0x3F: - return VME_A24; - case 0x8: - case 0x9: - case 0xA: - case 0xB: - case 0xC: - case 0xD: - case 0xE: - case 0xF: - return VME_A32; - case 0x0: - case 0x1: - case 0x3: - return VME_A64; - } - - return 0; -} - -/** - * vme_slave_request - Request a VME slave window resource. - * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. - * @address: Required VME address space. - * @cycle: Required VME data transfer cycle type. - * - * Request use of a VME window resource capable of being set for the requested - * address space and data transfer cycle. - * - * Return: Pointer to VME resource on success, NULL on failure. - */ -struct vme_resource *vme_slave_request(struct vme_dev *vdev, u32 address, - u32 cycle) -{ - struct vme_bridge *bridge; - struct list_head *slave_pos = NULL; - struct vme_slave_resource *allocated_image = NULL; - struct vme_slave_resource *slave_image = NULL; - struct vme_resource *resource = NULL; - - bridge = vdev->bridge; - if (!bridge) { - printk(KERN_ERR "Can't find VME bus\n"); - goto err_bus; - } - - /* Loop through slave resources */ - list_for_each(slave_pos, &bridge->slave_resources) { - slave_image = list_entry(slave_pos, - struct vme_slave_resource, list); - - if (!slave_image) { - printk(KERN_ERR "Registered NULL Slave resource\n"); - continue; - } - - /* Find an unlocked and compatible image */ - mutex_lock(&slave_image->mtx); - if (((slave_image->address_attr & address) == address) && - ((slave_image->cycle_attr & cycle) == cycle) && - (slave_image->locked == 0)) { - - slave_image->locked = 1; - mutex_unlock(&slave_image->mtx); - allocated_image = slave_image; - break; - } - mutex_unlock(&slave_image->mtx); - } - - /* No free image */ - if (!allocated_image) - goto err_image; - - resource = kmalloc(sizeof(*resource), GFP_KERNEL); - if (!resource) - goto err_alloc; - - resource->type = VME_SLAVE; - resource->entry = &allocated_image->list; - - return resource; - -err_alloc: - /* Unlock image */ - mutex_lock(&slave_image->mtx); - slave_image->locked = 0; - mutex_unlock(&slave_image->mtx); -err_image: -err_bus: - return NULL; -} -EXPORT_SYMBOL(vme_slave_request); - -/** - * vme_slave_set - Set VME slave window configuration. - * @resource: Pointer to VME slave resource. - * @enabled: State to which the window should be configured. - * @vme_base: Base address for the window. - * @size: Size of the VME window. - * @buf_base: Based address of buffer used to provide VME slave window storage. - * @aspace: VME address space for the VME window. - * @cycle: VME data transfer cycle type for the VME window. - * - * Set configuration for provided VME slave window. - * - * Return: Zero on success, -EINVAL if operation is not supported on this - * device, if an invalid resource has been provided or invalid - * attributes are provided. Hardware specific errors may also be - * returned. - */ -int vme_slave_set(struct vme_resource *resource, int enabled, - unsigned long long vme_base, unsigned long long size, - dma_addr_t buf_base, u32 aspace, u32 cycle) -{ - struct vme_bridge *bridge = find_bridge(resource); - struct vme_slave_resource *image; - int retval; - - if (resource->type != VME_SLAVE) { - printk(KERN_ERR "Not a slave resource\n"); - return -EINVAL; - } - - image = list_entry(resource->entry, struct vme_slave_resource, list); - - if (!bridge->slave_set) { - printk(KERN_ERR "Function not supported\n"); - return -ENOSYS; - } - - if (!(((image->address_attr & aspace) == aspace) && - ((image->cycle_attr & cycle) == cycle))) { - printk(KERN_ERR "Invalid attributes\n"); - return -EINVAL; - } - - retval = vme_check_window(aspace, vme_base, size); - if (retval) - return retval; - - return bridge->slave_set(image, enabled, vme_base, size, buf_base, - aspace, cycle); -} -EXPORT_SYMBOL(vme_slave_set); - -/** - * vme_slave_get - Retrieve VME slave window configuration. - * @resource: Pointer to VME slave resource. - * @enabled: Pointer to variable for storing state. - * @vme_base: Pointer to variable for storing window base address. - * @size: Pointer to variable for storing window size. - * @buf_base: Pointer to variable for storing slave buffer base address. - * @aspace: Pointer to variable for storing VME address space. - * @cycle: Pointer to variable for storing VME data transfer cycle type. - * - * Return configuration for provided VME slave window. - * - * Return: Zero on success, -EINVAL if operation is not supported on this - * device or if an invalid resource has been provided. - */ -int vme_slave_get(struct vme_resource *resource, int *enabled, - unsigned long long *vme_base, unsigned long long *size, - dma_addr_t *buf_base, u32 *aspace, u32 *cycle) -{ - struct vme_bridge *bridge = find_bridge(resource); - struct vme_slave_resource *image; - - if (resource->type != VME_SLAVE) { - printk(KERN_ERR "Not a slave resource\n"); - return -EINVAL; - } - - image = list_entry(resource->entry, struct vme_slave_resource, list); - - if (!bridge->slave_get) { - printk(KERN_ERR "vme_slave_get not supported\n"); - return -EINVAL; - } - - return bridge->slave_get(image, enabled, vme_base, size, buf_base, - aspace, cycle); -} -EXPORT_SYMBOL(vme_slave_get); - -/** - * vme_slave_free - Free VME slave window - * @resource: Pointer to VME slave resource. - * - * Free the provided slave resource so that it may be reallocated. - */ -void vme_slave_free(struct vme_resource *resource) -{ - struct vme_slave_resource *slave_image; - - if (resource->type != VME_SLAVE) { - printk(KERN_ERR "Not a slave resource\n"); - return; - } - - slave_image = list_entry(resource->entry, struct vme_slave_resource, - list); - if (!slave_image) { - printk(KERN_ERR "Can't find slave resource\n"); - return; - } - - /* Unlock image */ - mutex_lock(&slave_image->mtx); - if (slave_image->locked == 0) - printk(KERN_ERR "Image is already free\n"); - - slave_image->locked = 0; - mutex_unlock(&slave_image->mtx); - - /* Free up resource memory */ - kfree(resource); -} -EXPORT_SYMBOL(vme_slave_free); - -/** - * vme_master_request - Request a VME master window resource. - * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. - * @address: Required VME address space. - * @cycle: Required VME data transfer cycle type. - * @dwidth: Required VME data transfer width. - * - * Request use of a VME window resource capable of being set for the requested - * address space, data transfer cycle and width. - * - * Return: Pointer to VME resource on success, NULL on failure. - */ -struct vme_resource *vme_master_request(struct vme_dev *vdev, u32 address, - u32 cycle, u32 dwidth) -{ - struct vme_bridge *bridge; - struct list_head *master_pos = NULL; - struct vme_master_resource *allocated_image = NULL; - struct vme_master_resource *master_image = NULL; - struct vme_resource *resource = NULL; - - bridge = vdev->bridge; - if (!bridge) { - printk(KERN_ERR "Can't find VME bus\n"); - goto err_bus; - } - - /* Loop through master resources */ - list_for_each(master_pos, &bridge->master_resources) { - master_image = list_entry(master_pos, - struct vme_master_resource, list); - - if (!master_image) { - printk(KERN_WARNING "Registered NULL master resource\n"); - continue; - } - - /* Find an unlocked and compatible image */ - spin_lock(&master_image->lock); - if (((master_image->address_attr & address) == address) && - ((master_image->cycle_attr & cycle) == cycle) && - ((master_image->width_attr & dwidth) == dwidth) && - (master_image->locked == 0)) { - - master_image->locked = 1; - spin_unlock(&master_image->lock); - allocated_image = master_image; - break; - } - spin_unlock(&master_image->lock); - } - - /* Check to see if we found a resource */ - if (!allocated_image) { - printk(KERN_ERR "Can't find a suitable resource\n"); - goto err_image; - } - - resource = kmalloc(sizeof(*resource), GFP_KERNEL); - if (!resource) - goto err_alloc; - - resource->type = VME_MASTER; - resource->entry = &allocated_image->list; - - return resource; - -err_alloc: - /* Unlock image */ - spin_lock(&master_image->lock); - master_image->locked = 0; - spin_unlock(&master_image->lock); -err_image: -err_bus: - return NULL; -} -EXPORT_SYMBOL(vme_master_request); - -/** - * vme_master_set - Set VME master window configuration. - * @resource: Pointer to VME master resource. - * @enabled: State to which the window should be configured. - * @vme_base: Base address for the window. - * @size: Size of the VME window. - * @aspace: VME address space for the VME window. - * @cycle: VME data transfer cycle type for the VME window. - * @dwidth: VME data transfer width for the VME window. - * - * Set configuration for provided VME master window. - * - * Return: Zero on success, -EINVAL if operation is not supported on this - * device, if an invalid resource has been provided or invalid - * attributes are provided. Hardware specific errors may also be - * returned. - */ -int vme_master_set(struct vme_resource *resource, int enabled, - unsigned long long vme_base, unsigned long long size, u32 aspace, - u32 cycle, u32 dwidth) -{ - struct vme_bridge *bridge = find_bridge(resource); - struct vme_master_resource *image; - int retval; - - if (resource->type != VME_MASTER) { - printk(KERN_ERR "Not a master resource\n"); - return -EINVAL; - } - - image = list_entry(resource->entry, struct vme_master_resource, list); - - if (!bridge->master_set) { - printk(KERN_WARNING "vme_master_set not supported\n"); - return -EINVAL; - } - - if (!(((image->address_attr & aspace) == aspace) && - ((image->cycle_attr & cycle) == cycle) && - ((image->width_attr & dwidth) == dwidth))) { - printk(KERN_WARNING "Invalid attributes\n"); - return -EINVAL; - } - - retval = vme_check_window(aspace, vme_base, size); - if (retval) - return retval; - - return bridge->master_set(image, enabled, vme_base, size, aspace, - cycle, dwidth); -} -EXPORT_SYMBOL(vme_master_set); - -/** - * vme_master_get - Retrieve VME master window configuration. - * @resource: Pointer to VME master resource. - * @enabled: Pointer to variable for storing state. - * @vme_base: Pointer to variable for storing window base address. - * @size: Pointer to variable for storing window size. - * @aspace: Pointer to variable for storing VME address space. - * @cycle: Pointer to variable for storing VME data transfer cycle type. - * @dwidth: Pointer to variable for storing VME data transfer width. - * - * Return configuration for provided VME master window. - * - * Return: Zero on success, -EINVAL if operation is not supported on this - * device or if an invalid resource has been provided. - */ -int vme_master_get(struct vme_resource *resource, int *enabled, - unsigned long long *vme_base, unsigned long long *size, u32 *aspace, - u32 *cycle, u32 *dwidth) -{ - struct vme_bridge *bridge = find_bridge(resource); - struct vme_master_resource *image; - - if (resource->type != VME_MASTER) { - printk(KERN_ERR "Not a master resource\n"); - return -EINVAL; - } - - image = list_entry(resource->entry, struct vme_master_resource, list); - - if (!bridge->master_get) { - printk(KERN_WARNING "%s not supported\n", __func__); - return -EINVAL; - } - - return bridge->master_get(image, enabled, vme_base, size, aspace, - cycle, dwidth); -} -EXPORT_SYMBOL(vme_master_get); - -/** - * vme_master_read - Read data from VME space into a buffer. - * @resource: Pointer to VME master resource. - * @buf: Pointer to buffer where data should be transferred. - * @count: Number of bytes to transfer. - * @offset: Offset into VME master window at which to start transfer. - * - * Perform read of count bytes of data from location on VME bus which maps into - * the VME master window at offset to buf. - * - * Return: Number of bytes read, -EINVAL if resource is not a VME master - * resource or read operation is not supported. -EFAULT returned if - * invalid offset is provided. Hardware specific errors may also be - * returned. - */ -ssize_t vme_master_read(struct vme_resource *resource, void *buf, size_t count, - loff_t offset) -{ - struct vme_bridge *bridge = find_bridge(resource); - struct vme_master_resource *image; - size_t length; - - if (!bridge->master_read) { - printk(KERN_WARNING "Reading from resource not supported\n"); - return -EINVAL; - } - - if (resource->type != VME_MASTER) { - printk(KERN_ERR "Not a master resource\n"); - return -EINVAL; - } - - image = list_entry(resource->entry, struct vme_master_resource, list); - - length = vme_get_size(resource); - - if (offset > length) { - printk(KERN_WARNING "Invalid Offset\n"); - return -EFAULT; - } - - if ((offset + count) > length) - count = length - offset; - - return bridge->master_read(image, buf, count, offset); - -} -EXPORT_SYMBOL(vme_master_read); - -/** - * vme_master_write - Write data out to VME space from a buffer. - * @resource: Pointer to VME master resource. - * @buf: Pointer to buffer holding data to transfer. - * @count: Number of bytes to transfer. - * @offset: Offset into VME master window at which to start transfer. - * - * Perform write of count bytes of data from buf to location on VME bus which - * maps into the VME master window at offset. - * - * Return: Number of bytes written, -EINVAL if resource is not a VME master - * resource or write operation is not supported. -EFAULT returned if - * invalid offset is provided. Hardware specific errors may also be - * returned. - */ -ssize_t vme_master_write(struct vme_resource *resource, void *buf, - size_t count, loff_t offset) -{ - struct vme_bridge *bridge = find_bridge(resource); - struct vme_master_resource *image; - size_t length; - - if (!bridge->master_write) { - printk(KERN_WARNING "Writing to resource not supported\n"); - return -EINVAL; - } - - if (resource->type != VME_MASTER) { - printk(KERN_ERR "Not a master resource\n"); - return -EINVAL; - } - - image = list_entry(resource->entry, struct vme_master_resource, list); - - length = vme_get_size(resource); - - if (offset > length) { - printk(KERN_WARNING "Invalid Offset\n"); - return -EFAULT; - } - - if ((offset + count) > length) - count = length - offset; - - return bridge->master_write(image, buf, count, offset); -} -EXPORT_SYMBOL(vme_master_write); - -/** - * vme_master_rmw - Perform read-modify-write cycle. - * @resource: Pointer to VME master resource. - * @mask: Bits to be compared and swapped in operation. - * @compare: Bits to be compared with data read from offset. - * @swap: Bits to be swapped in data read from offset. - * @offset: Offset into VME master window at which to perform operation. - * - * Perform read-modify-write cycle on provided location: - * - Location on VME bus is read. - * - Bits selected by mask are compared with compare. - * - Where a selected bit matches that in compare and are selected in swap, - * the bit is swapped. - * - Result written back to location on VME bus. - * - * Return: Bytes written on success, -EINVAL if resource is not a VME master - * resource or RMW operation is not supported. Hardware specific - * errors may also be returned. - */ -unsigned int vme_master_rmw(struct vme_resource *resource, unsigned int mask, - unsigned int compare, unsigned int swap, loff_t offset) -{ - struct vme_bridge *bridge = find_bridge(resource); - struct vme_master_resource *image; - - if (!bridge->master_rmw) { - printk(KERN_WARNING "Writing to resource not supported\n"); - return -EINVAL; - } - - if (resource->type != VME_MASTER) { - printk(KERN_ERR "Not a master resource\n"); - return -EINVAL; - } - - image = list_entry(resource->entry, struct vme_master_resource, list); - - return bridge->master_rmw(image, mask, compare, swap, offset); -} -EXPORT_SYMBOL(vme_master_rmw); - -/** - * vme_master_mmap - Mmap region of VME master window. - * @resource: Pointer to VME master resource. - * @vma: Pointer to definition of user mapping. - * - * Memory map a region of the VME master window into user space. - * - * Return: Zero on success, -EINVAL if resource is not a VME master - * resource or -EFAULT if map exceeds window size. Other generic mmap - * errors may also be returned. - */ -int vme_master_mmap(struct vme_resource *resource, struct vm_area_struct *vma) -{ - struct vme_master_resource *image; - phys_addr_t phys_addr; - unsigned long vma_size; - - if (resource->type != VME_MASTER) { - pr_err("Not a master resource\n"); - return -EINVAL; - } - - image = list_entry(resource->entry, struct vme_master_resource, list); - phys_addr = image->bus_resource.start + (vma->vm_pgoff << PAGE_SHIFT); - vma_size = vma->vm_end - vma->vm_start; - - if (phys_addr + vma_size > image->bus_resource.end + 1) { - pr_err("Map size cannot exceed the window size\n"); - return -EFAULT; - } - - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - - return vm_iomap_memory(vma, phys_addr, vma->vm_end - vma->vm_start); -} -EXPORT_SYMBOL(vme_master_mmap); - -/** - * vme_master_free - Free VME master window - * @resource: Pointer to VME master resource. - * - * Free the provided master resource so that it may be reallocated. - */ -void vme_master_free(struct vme_resource *resource) -{ - struct vme_master_resource *master_image; - - if (resource->type != VME_MASTER) { - printk(KERN_ERR "Not a master resource\n"); - return; - } - - master_image = list_entry(resource->entry, struct vme_master_resource, - list); - if (!master_image) { - printk(KERN_ERR "Can't find master resource\n"); - return; - } - - /* Unlock image */ - spin_lock(&master_image->lock); - if (master_image->locked == 0) - printk(KERN_ERR "Image is already free\n"); - - master_image->locked = 0; - spin_unlock(&master_image->lock); - - /* Free up resource memory */ - kfree(resource); -} -EXPORT_SYMBOL(vme_master_free); - -/** - * vme_dma_request - Request a DMA controller. - * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. - * @route: Required src/destination combination. - * - * Request a VME DMA controller with capability to perform transfers bewteen - * requested source/destination combination. - * - * Return: Pointer to VME DMA resource on success, NULL on failure. - */ -struct vme_resource *vme_dma_request(struct vme_dev *vdev, u32 route) -{ - struct vme_bridge *bridge; - struct list_head *dma_pos = NULL; - struct vme_dma_resource *allocated_ctrlr = NULL; - struct vme_dma_resource *dma_ctrlr = NULL; - struct vme_resource *resource = NULL; - - /* XXX Not checking resource attributes */ - printk(KERN_ERR "No VME resource Attribute tests done\n"); - - bridge = vdev->bridge; - if (!bridge) { - printk(KERN_ERR "Can't find VME bus\n"); - goto err_bus; - } - - /* Loop through DMA resources */ - list_for_each(dma_pos, &bridge->dma_resources) { - dma_ctrlr = list_entry(dma_pos, - struct vme_dma_resource, list); - if (!dma_ctrlr) { - printk(KERN_ERR "Registered NULL DMA resource\n"); - continue; - } - - /* Find an unlocked and compatible controller */ - mutex_lock(&dma_ctrlr->mtx); - if (((dma_ctrlr->route_attr & route) == route) && - (dma_ctrlr->locked == 0)) { - - dma_ctrlr->locked = 1; - mutex_unlock(&dma_ctrlr->mtx); - allocated_ctrlr = dma_ctrlr; - break; - } - mutex_unlock(&dma_ctrlr->mtx); - } - - /* Check to see if we found a resource */ - if (!allocated_ctrlr) - goto err_ctrlr; - - resource = kmalloc(sizeof(*resource), GFP_KERNEL); - if (!resource) - goto err_alloc; - - resource->type = VME_DMA; - resource->entry = &allocated_ctrlr->list; - - return resource; - -err_alloc: - /* Unlock image */ - mutex_lock(&dma_ctrlr->mtx); - dma_ctrlr->locked = 0; - mutex_unlock(&dma_ctrlr->mtx); -err_ctrlr: -err_bus: - return NULL; -} -EXPORT_SYMBOL(vme_dma_request); - -/** - * vme_new_dma_list - Create new VME DMA list. - * @resource: Pointer to VME DMA resource. - * - * Create a new VME DMA list. It is the responsibility of the user to free - * the list once it is no longer required with vme_dma_list_free(). - * - * Return: Pointer to new VME DMA list, NULL on allocation failure or invalid - * VME DMA resource. - */ -struct vme_dma_list *vme_new_dma_list(struct vme_resource *resource) -{ - struct vme_dma_list *dma_list; - - if (resource->type != VME_DMA) { - printk(KERN_ERR "Not a DMA resource\n"); - return NULL; - } - - dma_list = kmalloc(sizeof(*dma_list), GFP_KERNEL); - if (!dma_list) - return NULL; - - INIT_LIST_HEAD(&dma_list->entries); - dma_list->parent = list_entry(resource->entry, - struct vme_dma_resource, - list); - mutex_init(&dma_list->mtx); - - return dma_list; -} -EXPORT_SYMBOL(vme_new_dma_list); - -/** - * vme_dma_pattern_attribute - Create "Pattern" type VME DMA list attribute. - * @pattern: Value to use used as pattern - * @type: Type of pattern to be written. - * - * Create VME DMA list attribute for pattern generation. It is the - * responsibility of the user to free used attributes using - * vme_dma_free_attribute(). - * - * Return: Pointer to VME DMA attribute, NULL on failure. - */ -struct vme_dma_attr *vme_dma_pattern_attribute(u32 pattern, u32 type) -{ - struct vme_dma_attr *attributes; - struct vme_dma_pattern *pattern_attr; - - attributes = kmalloc(sizeof(*attributes), GFP_KERNEL); - if (!attributes) - goto err_attr; - - pattern_attr = kmalloc(sizeof(*pattern_attr), GFP_KERNEL); - if (!pattern_attr) - goto err_pat; - - attributes->type = VME_DMA_PATTERN; - attributes->private = (void *)pattern_attr; - - pattern_attr->pattern = pattern; - pattern_attr->type = type; - - return attributes; - -err_pat: - kfree(attributes); -err_attr: - return NULL; -} -EXPORT_SYMBOL(vme_dma_pattern_attribute); - -/** - * vme_dma_pci_attribute - Create "PCI" type VME DMA list attribute. - * @address: PCI base address for DMA transfer. - * - * Create VME DMA list attribute pointing to a location on PCI for DMA - * transfers. It is the responsibility of the user to free used attributes - * using vme_dma_free_attribute(). - * - * Return: Pointer to VME DMA attribute, NULL on failure. - */ -struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t address) -{ - struct vme_dma_attr *attributes; - struct vme_dma_pci *pci_attr; - - /* XXX Run some sanity checks here */ - - attributes = kmalloc(sizeof(*attributes), GFP_KERNEL); - if (!attributes) - goto err_attr; - - pci_attr = kmalloc(sizeof(*pci_attr), GFP_KERNEL); - if (!pci_attr) - goto err_pci; - - attributes->type = VME_DMA_PCI; - attributes->private = (void *)pci_attr; - - pci_attr->address = address; - - return attributes; - -err_pci: - kfree(attributes); -err_attr: - return NULL; -} -EXPORT_SYMBOL(vme_dma_pci_attribute); - -/** - * vme_dma_vme_attribute - Create "VME" type VME DMA list attribute. - * @address: VME base address for DMA transfer. - * @aspace: VME address space to use for DMA transfer. - * @cycle: VME bus cycle to use for DMA transfer. - * @dwidth: VME data width to use for DMA transfer. - * - * Create VME DMA list attribute pointing to a location on the VME bus for DMA - * transfers. It is the responsibility of the user to free used attributes - * using vme_dma_free_attribute(). - * - * Return: Pointer to VME DMA attribute, NULL on failure. - */ -struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long address, - u32 aspace, u32 cycle, u32 dwidth) -{ - struct vme_dma_attr *attributes; - struct vme_dma_vme *vme_attr; - - attributes = kmalloc(sizeof(*attributes), GFP_KERNEL); - if (!attributes) - goto err_attr; - - vme_attr = kmalloc(sizeof(*vme_attr), GFP_KERNEL); - if (!vme_attr) - goto err_vme; - - attributes->type = VME_DMA_VME; - attributes->private = (void *)vme_attr; - - vme_attr->address = address; - vme_attr->aspace = aspace; - vme_attr->cycle = cycle; - vme_attr->dwidth = dwidth; - - return attributes; - -err_vme: - kfree(attributes); -err_attr: - return NULL; -} -EXPORT_SYMBOL(vme_dma_vme_attribute); - -/** - * vme_dma_free_attribute - Free DMA list attribute. - * @attributes: Pointer to DMA list attribute. - * - * Free VME DMA list attribute. VME DMA list attributes can be safely freed - * once vme_dma_list_add() has returned. - */ -void vme_dma_free_attribute(struct vme_dma_attr *attributes) -{ - kfree(attributes->private); - kfree(attributes); -} -EXPORT_SYMBOL(vme_dma_free_attribute); - -/** - * vme_dma_list_add - Add enty to a VME DMA list. - * @list: Pointer to VME list. - * @src: Pointer to DMA list attribute to use as source. - * @dest: Pointer to DMA list attribute to use as destination. - * @count: Number of bytes to transfer. - * - * Add an entry to the provided VME DMA list. Entry requires pointers to source - * and destination DMA attributes and a count. - * - * Please note, the attributes supported as source and destinations for - * transfers are hardware dependent. - * - * Return: Zero on success, -EINVAL if operation is not supported on this - * device or if the link list has already been submitted for execution. - * Hardware specific errors also possible. - */ -int vme_dma_list_add(struct vme_dma_list *list, struct vme_dma_attr *src, - struct vme_dma_attr *dest, size_t count) -{ - struct vme_bridge *bridge = list->parent->parent; - int retval; - - if (!bridge->dma_list_add) { - printk(KERN_WARNING "Link List DMA generation not supported\n"); - return -EINVAL; - } - - if (!mutex_trylock(&list->mtx)) { - printk(KERN_ERR "Link List already submitted\n"); - return -EINVAL; - } - - retval = bridge->dma_list_add(list, src, dest, count); - - mutex_unlock(&list->mtx); - - return retval; -} -EXPORT_SYMBOL(vme_dma_list_add); - -/** - * vme_dma_list_exec - Queue a VME DMA list for execution. - * @list: Pointer to VME list. - * - * Queue the provided VME DMA list for execution. The call will return once the - * list has been executed. - * - * Return: Zero on success, -EINVAL if operation is not supported on this - * device. Hardware specific errors also possible. - */ -int vme_dma_list_exec(struct vme_dma_list *list) -{ - struct vme_bridge *bridge = list->parent->parent; - int retval; - - if (!bridge->dma_list_exec) { - printk(KERN_ERR "Link List DMA execution not supported\n"); - return -EINVAL; - } - - mutex_lock(&list->mtx); - - retval = bridge->dma_list_exec(list); - - mutex_unlock(&list->mtx); - - return retval; -} -EXPORT_SYMBOL(vme_dma_list_exec); - -/** - * vme_dma_list_free - Free a VME DMA list. - * @list: Pointer to VME list. - * - * Free the provided DMA list and all its entries. - * - * Return: Zero on success, -EINVAL on invalid VME resource, -EBUSY if resource - * is still in use. Hardware specific errors also possible. - */ -int vme_dma_list_free(struct vme_dma_list *list) -{ - struct vme_bridge *bridge = list->parent->parent; - int retval; - - if (!bridge->dma_list_empty) { - printk(KERN_WARNING "Emptying of Link Lists not supported\n"); - return -EINVAL; - } - - if (!mutex_trylock(&list->mtx)) { - printk(KERN_ERR "Link List in use\n"); - return -EBUSY; - } - - /* - * Empty out all of the entries from the DMA list. We need to go to the - * low level driver as DMA entries are driver specific. - */ - retval = bridge->dma_list_empty(list); - if (retval) { - printk(KERN_ERR "Unable to empty link-list entries\n"); - mutex_unlock(&list->mtx); - return retval; - } - mutex_unlock(&list->mtx); - kfree(list); - - return retval; -} -EXPORT_SYMBOL(vme_dma_list_free); - -/** - * vme_dma_free - Free a VME DMA resource. - * @resource: Pointer to VME DMA resource. - * - * Free the provided DMA resource so that it may be reallocated. - * - * Return: Zero on success, -EINVAL on invalid VME resource, -EBUSY if resource - * is still active. - */ -int vme_dma_free(struct vme_resource *resource) -{ - struct vme_dma_resource *ctrlr; - - if (resource->type != VME_DMA) { - printk(KERN_ERR "Not a DMA resource\n"); - return -EINVAL; - } - - ctrlr = list_entry(resource->entry, struct vme_dma_resource, list); - - if (!mutex_trylock(&ctrlr->mtx)) { - printk(KERN_ERR "Resource busy, can't free\n"); - return -EBUSY; - } - - if (!(list_empty(&ctrlr->pending) && list_empty(&ctrlr->running))) { - printk(KERN_WARNING "Resource still processing transfers\n"); - mutex_unlock(&ctrlr->mtx); - return -EBUSY; - } - - ctrlr->locked = 0; - - mutex_unlock(&ctrlr->mtx); - - kfree(resource); - - return 0; -} -EXPORT_SYMBOL(vme_dma_free); - -void vme_bus_error_handler(struct vme_bridge *bridge, - unsigned long long address, int am) -{ - struct list_head *handler_pos = NULL; - struct vme_error_handler *handler; - int handler_triggered = 0; - u32 aspace = vme_get_aspace(am); - - list_for_each(handler_pos, &bridge->vme_error_handlers) { - handler = list_entry(handler_pos, struct vme_error_handler, - list); - if ((aspace == handler->aspace) && - (address >= handler->start) && - (address < handler->end)) { - if (!handler->num_errors) - handler->first_error = address; - if (handler->num_errors != UINT_MAX) - handler->num_errors++; - handler_triggered = 1; - } - } - - if (!handler_triggered) - dev_err(bridge->parent, - "Unhandled VME access error at address 0x%llx\n", - address); -} -EXPORT_SYMBOL(vme_bus_error_handler); - -struct vme_error_handler *vme_register_error_handler( - struct vme_bridge *bridge, u32 aspace, - unsigned long long address, size_t len) -{ - struct vme_error_handler *handler; - - handler = kmalloc(sizeof(*handler), GFP_ATOMIC); - if (!handler) - return NULL; - - handler->aspace = aspace; - handler->start = address; - handler->end = address + len; - handler->num_errors = 0; - handler->first_error = 0; - list_add_tail(&handler->list, &bridge->vme_error_handlers); - - return handler; -} -EXPORT_SYMBOL(vme_register_error_handler); - -void vme_unregister_error_handler(struct vme_error_handler *handler) -{ - list_del(&handler->list); - kfree(handler); -} -EXPORT_SYMBOL(vme_unregister_error_handler); - -void vme_irq_handler(struct vme_bridge *bridge, int level, int statid) -{ - void (*call)(int, int, void *); - void *priv_data; - - call = bridge->irq[level - 1].callback[statid].func; - priv_data = bridge->irq[level - 1].callback[statid].priv_data; - if (call) - call(level, statid, priv_data); - else - printk(KERN_WARNING "Spurious VME interrupt, level:%x, vector:%x\n", - level, statid); -} -EXPORT_SYMBOL(vme_irq_handler); - -/** - * vme_irq_request - Request a specific VME interrupt. - * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. - * @level: Interrupt priority being requested. - * @statid: Interrupt vector being requested. - * @callback: Pointer to callback function called when VME interrupt/vector - * received. - * @priv_data: Generic pointer that will be passed to the callback function. - * - * Request callback to be attached as a handler for VME interrupts with provided - * level and statid. - * - * Return: Zero on success, -EINVAL on invalid vme device, level or if the - * function is not supported, -EBUSY if the level/statid combination is - * already in use. Hardware specific errors also possible. - */ -int vme_irq_request(struct vme_dev *vdev, int level, int statid, - void (*callback)(int, int, void *), - void *priv_data) -{ - struct vme_bridge *bridge; - - bridge = vdev->bridge; - if (!bridge) { - printk(KERN_ERR "Can't find VME bus\n"); - return -EINVAL; - } - - if ((level < 1) || (level > 7)) { - printk(KERN_ERR "Invalid interrupt level\n"); - return -EINVAL; - } - - if (!bridge->irq_set) { - printk(KERN_ERR "Configuring interrupts not supported\n"); - return -EINVAL; - } - - mutex_lock(&bridge->irq_mtx); - - if (bridge->irq[level - 1].callback[statid].func) { - mutex_unlock(&bridge->irq_mtx); - printk(KERN_WARNING "VME Interrupt already taken\n"); - return -EBUSY; - } - - bridge->irq[level - 1].count++; - bridge->irq[level - 1].callback[statid].priv_data = priv_data; - bridge->irq[level - 1].callback[statid].func = callback; - - /* Enable IRQ level */ - bridge->irq_set(bridge, level, 1, 1); - - mutex_unlock(&bridge->irq_mtx); - - return 0; -} -EXPORT_SYMBOL(vme_irq_request); - -/** - * vme_irq_free - Free a VME interrupt. - * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. - * @level: Interrupt priority of interrupt being freed. - * @statid: Interrupt vector of interrupt being freed. - * - * Remove previously attached callback from VME interrupt priority/vector. - */ -void vme_irq_free(struct vme_dev *vdev, int level, int statid) -{ - struct vme_bridge *bridge; - - bridge = vdev->bridge; - if (!bridge) { - printk(KERN_ERR "Can't find VME bus\n"); - return; - } - - if ((level < 1) || (level > 7)) { - printk(KERN_ERR "Invalid interrupt level\n"); - return; - } - - if (!bridge->irq_set) { - printk(KERN_ERR "Configuring interrupts not supported\n"); - return; - } - - mutex_lock(&bridge->irq_mtx); - - bridge->irq[level - 1].count--; - - /* Disable IRQ level if no more interrupts attached at this level*/ - if (bridge->irq[level - 1].count == 0) - bridge->irq_set(bridge, level, 0, 1); - - bridge->irq[level - 1].callback[statid].func = NULL; - bridge->irq[level - 1].callback[statid].priv_data = NULL; - - mutex_unlock(&bridge->irq_mtx); -} -EXPORT_SYMBOL(vme_irq_free); - -/** - * vme_irq_generate - Generate VME interrupt. - * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. - * @level: Interrupt priority at which to assert the interrupt. - * @statid: Interrupt vector to associate with the interrupt. - * - * Generate a VME interrupt of the provided level and with the provided - * statid. - * - * Return: Zero on success, -EINVAL on invalid vme device, level or if the - * function is not supported. Hardware specific errors also possible. - */ -int vme_irq_generate(struct vme_dev *vdev, int level, int statid) -{ - struct vme_bridge *bridge; - - bridge = vdev->bridge; - if (!bridge) { - printk(KERN_ERR "Can't find VME bus\n"); - return -EINVAL; - } - - if ((level < 1) || (level > 7)) { - printk(KERN_WARNING "Invalid interrupt level\n"); - return -EINVAL; - } - - if (!bridge->irq_generate) { - printk(KERN_WARNING "Interrupt generation not supported\n"); - return -EINVAL; - } - - return bridge->irq_generate(bridge, level, statid); -} -EXPORT_SYMBOL(vme_irq_generate); - -/** - * vme_lm_request - Request a VME location monitor - * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. - * - * Allocate a location monitor resource to the driver. A location monitor - * allows the driver to monitor accesses to a contiguous number of - * addresses on the VME bus. - * - * Return: Pointer to a VME resource on success or NULL on failure. - */ -struct vme_resource *vme_lm_request(struct vme_dev *vdev) -{ - struct vme_bridge *bridge; - struct list_head *lm_pos = NULL; - struct vme_lm_resource *allocated_lm = NULL; - struct vme_lm_resource *lm = NULL; - struct vme_resource *resource = NULL; - - bridge = vdev->bridge; - if (!bridge) { - printk(KERN_ERR "Can't find VME bus\n"); - goto err_bus; - } - - /* Loop through LM resources */ - list_for_each(lm_pos, &bridge->lm_resources) { - lm = list_entry(lm_pos, - struct vme_lm_resource, list); - if (!lm) { - printk(KERN_ERR "Registered NULL Location Monitor resource\n"); - continue; - } - - /* Find an unlocked controller */ - mutex_lock(&lm->mtx); - if (lm->locked == 0) { - lm->locked = 1; - mutex_unlock(&lm->mtx); - allocated_lm = lm; - break; - } - mutex_unlock(&lm->mtx); - } - - /* Check to see if we found a resource */ - if (!allocated_lm) - goto err_lm; - - resource = kmalloc(sizeof(*resource), GFP_KERNEL); - if (!resource) - goto err_alloc; - - resource->type = VME_LM; - resource->entry = &allocated_lm->list; - - return resource; - -err_alloc: - /* Unlock image */ - mutex_lock(&lm->mtx); - lm->locked = 0; - mutex_unlock(&lm->mtx); -err_lm: -err_bus: - return NULL; -} -EXPORT_SYMBOL(vme_lm_request); - -/** - * vme_lm_count - Determine number of VME Addresses monitored - * @resource: Pointer to VME location monitor resource. - * - * The number of contiguous addresses monitored is hardware dependent. - * Return the number of contiguous addresses monitored by the - * location monitor. - * - * Return: Count of addresses monitored or -EINVAL when provided with an - * invalid location monitor resource. - */ -int vme_lm_count(struct vme_resource *resource) -{ - struct vme_lm_resource *lm; - - if (resource->type != VME_LM) { - printk(KERN_ERR "Not a Location Monitor resource\n"); - return -EINVAL; - } - - lm = list_entry(resource->entry, struct vme_lm_resource, list); - - return lm->monitors; -} -EXPORT_SYMBOL(vme_lm_count); - -/** - * vme_lm_set - Configure location monitor - * @resource: Pointer to VME location monitor resource. - * @lm_base: Base address to monitor. - * @aspace: VME address space to monitor. - * @cycle: VME bus cycle type to monitor. - * - * Set the base address, address space and cycle type of accesses to be - * monitored by the location monitor. - * - * Return: Zero on success, -EINVAL when provided with an invalid location - * monitor resource or function is not supported. Hardware specific - * errors may also be returned. - */ -int vme_lm_set(struct vme_resource *resource, unsigned long long lm_base, - u32 aspace, u32 cycle) -{ - struct vme_bridge *bridge = find_bridge(resource); - struct vme_lm_resource *lm; - - if (resource->type != VME_LM) { - printk(KERN_ERR "Not a Location Monitor resource\n"); - return -EINVAL; - } - - lm = list_entry(resource->entry, struct vme_lm_resource, list); - - if (!bridge->lm_set) { - printk(KERN_ERR "vme_lm_set not supported\n"); - return -EINVAL; - } - - return bridge->lm_set(lm, lm_base, aspace, cycle); -} -EXPORT_SYMBOL(vme_lm_set); - -/** - * vme_lm_get - Retrieve location monitor settings - * @resource: Pointer to VME location monitor resource. - * @lm_base: Pointer used to output the base address monitored. - * @aspace: Pointer used to output the address space monitored. - * @cycle: Pointer used to output the VME bus cycle type monitored. - * - * Retrieve the base address, address space and cycle type of accesses to - * be monitored by the location monitor. - * - * Return: Zero on success, -EINVAL when provided with an invalid location - * monitor resource or function is not supported. Hardware specific - * errors may also be returned. - */ -int vme_lm_get(struct vme_resource *resource, unsigned long long *lm_base, - u32 *aspace, u32 *cycle) -{ - struct vme_bridge *bridge = find_bridge(resource); - struct vme_lm_resource *lm; - - if (resource->type != VME_LM) { - printk(KERN_ERR "Not a Location Monitor resource\n"); - return -EINVAL; - } - - lm = list_entry(resource->entry, struct vme_lm_resource, list); - - if (!bridge->lm_get) { - printk(KERN_ERR "vme_lm_get not supported\n"); - return -EINVAL; - } - - return bridge->lm_get(lm, lm_base, aspace, cycle); -} -EXPORT_SYMBOL(vme_lm_get); - -/** - * vme_lm_attach - Provide callback for location monitor address - * @resource: Pointer to VME location monitor resource. - * @monitor: Offset to which callback should be attached. - * @callback: Pointer to callback function called when triggered. - * @data: Generic pointer that will be passed to the callback function. - * - * Attach a callback to the specificed offset into the location monitors - * monitored addresses. A generic pointer is provided to allow data to be - * passed to the callback when called. - * - * Return: Zero on success, -EINVAL when provided with an invalid location - * monitor resource or function is not supported. Hardware specific - * errors may also be returned. - */ -int vme_lm_attach(struct vme_resource *resource, int monitor, - void (*callback)(void *), void *data) -{ - struct vme_bridge *bridge = find_bridge(resource); - struct vme_lm_resource *lm; - - if (resource->type != VME_LM) { - printk(KERN_ERR "Not a Location Monitor resource\n"); - return -EINVAL; - } - - lm = list_entry(resource->entry, struct vme_lm_resource, list); - - if (!bridge->lm_attach) { - printk(KERN_ERR "vme_lm_attach not supported\n"); - return -EINVAL; - } - - return bridge->lm_attach(lm, monitor, callback, data); -} -EXPORT_SYMBOL(vme_lm_attach); - -/** - * vme_lm_detach - Remove callback for location monitor address - * @resource: Pointer to VME location monitor resource. - * @monitor: Offset to which callback should be removed. - * - * Remove the callback associated with the specificed offset into the - * location monitors monitored addresses. - * - * Return: Zero on success, -EINVAL when provided with an invalid location - * monitor resource or function is not supported. Hardware specific - * errors may also be returned. - */ -int vme_lm_detach(struct vme_resource *resource, int monitor) -{ - struct vme_bridge *bridge = find_bridge(resource); - struct vme_lm_resource *lm; - - if (resource->type != VME_LM) { - printk(KERN_ERR "Not a Location Monitor resource\n"); - return -EINVAL; - } - - lm = list_entry(resource->entry, struct vme_lm_resource, list); - - if (!bridge->lm_detach) { - printk(KERN_ERR "vme_lm_detach not supported\n"); - return -EINVAL; - } - - return bridge->lm_detach(lm, monitor); -} -EXPORT_SYMBOL(vme_lm_detach); - -/** - * vme_lm_free - Free allocated VME location monitor - * @resource: Pointer to VME location monitor resource. - * - * Free allocation of a VME location monitor. - * - * WARNING: This function currently expects that any callbacks that have - * been attached to the location monitor have been removed. - * - * Return: Zero on success, -EINVAL when provided with an invalid location - * monitor resource. - */ -void vme_lm_free(struct vme_resource *resource) -{ - struct vme_lm_resource *lm; - - if (resource->type != VME_LM) { - printk(KERN_ERR "Not a Location Monitor resource\n"); - return; - } - - lm = list_entry(resource->entry, struct vme_lm_resource, list); - - mutex_lock(&lm->mtx); - - /* XXX - * Check to see that there aren't any callbacks still attached, if - * there are we should probably be detaching them! - */ - - lm->locked = 0; - - mutex_unlock(&lm->mtx); - - kfree(resource); -} -EXPORT_SYMBOL(vme_lm_free); - -/** - * vme_slot_num - Retrieve slot ID - * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. - * - * Retrieve the slot ID associated with the provided VME device. - * - * Return: The slot ID on success, -EINVAL if VME bridge cannot be determined - * or the function is not supported. Hardware specific errors may also - * be returned. - */ -int vme_slot_num(struct vme_dev *vdev) -{ - struct vme_bridge *bridge; - - bridge = vdev->bridge; - if (!bridge) { - printk(KERN_ERR "Can't find VME bus\n"); - return -EINVAL; - } - - if (!bridge->slot_get) { - printk(KERN_WARNING "vme_slot_num not supported\n"); - return -EINVAL; - } - - return bridge->slot_get(bridge); -} -EXPORT_SYMBOL(vme_slot_num); - -/** - * vme_bus_num - Retrieve bus number - * @vdev: Pointer to VME device struct vme_dev assigned to driver instance. - * - * Retrieve the bus enumeration associated with the provided VME device. - * - * Return: The bus number on success, -EINVAL if VME bridge cannot be - * determined. - */ -int vme_bus_num(struct vme_dev *vdev) -{ - struct vme_bridge *bridge; - - bridge = vdev->bridge; - if (!bridge) { - pr_err("Can't find VME bus\n"); - return -EINVAL; - } - - return bridge->num; -} -EXPORT_SYMBOL(vme_bus_num); - -/* - Bridge Registration --------------------------------------------------- */ - -static void vme_dev_release(struct device *dev) -{ - kfree(dev_to_vme_dev(dev)); -} - -/* Common bridge initialization */ -struct vme_bridge *vme_init_bridge(struct vme_bridge *bridge) -{ - INIT_LIST_HEAD(&bridge->vme_error_handlers); - INIT_LIST_HEAD(&bridge->master_resources); - INIT_LIST_HEAD(&bridge->slave_resources); - INIT_LIST_HEAD(&bridge->dma_resources); - INIT_LIST_HEAD(&bridge->lm_resources); - mutex_init(&bridge->irq_mtx); - - return bridge; -} -EXPORT_SYMBOL(vme_init_bridge); - -int vme_register_bridge(struct vme_bridge *bridge) -{ - int i; - int ret = -1; - - mutex_lock(&vme_buses_lock); - for (i = 0; i < sizeof(vme_bus_numbers) * 8; i++) { - if ((vme_bus_numbers & (1 << i)) == 0) { - vme_bus_numbers |= (1 << i); - bridge->num = i; - INIT_LIST_HEAD(&bridge->devices); - list_add_tail(&bridge->bus_list, &vme_bus_list); - ret = 0; - break; - } - } - mutex_unlock(&vme_buses_lock); - - return ret; -} -EXPORT_SYMBOL(vme_register_bridge); - -void vme_unregister_bridge(struct vme_bridge *bridge) -{ - struct vme_dev *vdev; - struct vme_dev *tmp; - - mutex_lock(&vme_buses_lock); - vme_bus_numbers &= ~(1 << bridge->num); - list_for_each_entry_safe(vdev, tmp, &bridge->devices, bridge_list) { - list_del(&vdev->drv_list); - list_del(&vdev->bridge_list); - device_unregister(&vdev->dev); - } - list_del(&bridge->bus_list); - mutex_unlock(&vme_buses_lock); -} -EXPORT_SYMBOL(vme_unregister_bridge); - -/* - Driver Registration --------------------------------------------------- */ - -static int __vme_register_driver_bus(struct vme_driver *drv, - struct vme_bridge *bridge, unsigned int ndevs) -{ - int err; - unsigned int i; - struct vme_dev *vdev; - struct vme_dev *tmp; - - for (i = 0; i < ndevs; i++) { - vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); - if (!vdev) { - err = -ENOMEM; - goto err_devalloc; - } - vdev->num = i; - vdev->bridge = bridge; - vdev->dev.platform_data = drv; - vdev->dev.release = vme_dev_release; - vdev->dev.parent = bridge->parent; - vdev->dev.bus = &vme_bus_type; - dev_set_name(&vdev->dev, "%s.%u-%u", drv->name, bridge->num, - vdev->num); - - err = device_register(&vdev->dev); - if (err) - goto err_reg; - - if (vdev->dev.platform_data) { - list_add_tail(&vdev->drv_list, &drv->devices); - list_add_tail(&vdev->bridge_list, &bridge->devices); - } else - device_unregister(&vdev->dev); - } - return 0; - -err_reg: - put_device(&vdev->dev); -err_devalloc: - list_for_each_entry_safe(vdev, tmp, &drv->devices, drv_list) { - list_del(&vdev->drv_list); - list_del(&vdev->bridge_list); - device_unregister(&vdev->dev); - } - return err; -} - -static int __vme_register_driver(struct vme_driver *drv, unsigned int ndevs) -{ - struct vme_bridge *bridge; - int err = 0; - - mutex_lock(&vme_buses_lock); - list_for_each_entry(bridge, &vme_bus_list, bus_list) { - /* - * This cannot cause trouble as we already have vme_buses_lock - * and if the bridge is removed, it will have to go through - * vme_unregister_bridge() to do it (which calls remove() on - * the bridge which in turn tries to acquire vme_buses_lock and - * will have to wait). - */ - err = __vme_register_driver_bus(drv, bridge, ndevs); - if (err) - break; - } - mutex_unlock(&vme_buses_lock); - return err; -} - -/** - * vme_register_driver - Register a VME driver - * @drv: Pointer to VME driver structure to register. - * @ndevs: Maximum number of devices to allow to be enumerated. - * - * Register a VME device driver with the VME subsystem. - * - * Return: Zero on success, error value on registration failure. - */ -int vme_register_driver(struct vme_driver *drv, unsigned int ndevs) -{ - int err; - - drv->driver.name = drv->name; - drv->driver.bus = &vme_bus_type; - INIT_LIST_HEAD(&drv->devices); - - err = driver_register(&drv->driver); - if (err) - return err; - - err = __vme_register_driver(drv, ndevs); - if (err) - driver_unregister(&drv->driver); - - return err; -} -EXPORT_SYMBOL(vme_register_driver); - -/** - * vme_unregister_driver - Unregister a VME driver - * @drv: Pointer to VME driver structure to unregister. - * - * Unregister a VME device driver from the VME subsystem. - */ -void vme_unregister_driver(struct vme_driver *drv) -{ - struct vme_dev *dev, *dev_tmp; - - mutex_lock(&vme_buses_lock); - list_for_each_entry_safe(dev, dev_tmp, &drv->devices, drv_list) { - list_del(&dev->drv_list); - list_del(&dev->bridge_list); - device_unregister(&dev->dev); - } - mutex_unlock(&vme_buses_lock); - - driver_unregister(&drv->driver); -} -EXPORT_SYMBOL(vme_unregister_driver); - -/* - Bus Registration ------------------------------------------------------ */ - -static int vme_bus_match(struct device *dev, struct device_driver *drv) -{ - struct vme_driver *vme_drv; - - vme_drv = container_of(drv, struct vme_driver, driver); - - if (dev->platform_data == vme_drv) { - struct vme_dev *vdev = dev_to_vme_dev(dev); - - if (vme_drv->match && vme_drv->match(vdev)) - return 1; - - dev->platform_data = NULL; - } - return 0; -} - -static int vme_bus_probe(struct device *dev) -{ - struct vme_driver *driver; - struct vme_dev *vdev = dev_to_vme_dev(dev); - - driver = dev->platform_data; - if (driver->probe) - return driver->probe(vdev); - - return -ENODEV; -} - -static void vme_bus_remove(struct device *dev) -{ - struct vme_driver *driver; - struct vme_dev *vdev = dev_to_vme_dev(dev); - - driver = dev->platform_data; - if (driver->remove) - driver->remove(vdev); -} - -struct bus_type vme_bus_type = { - .name = "vme", - .match = vme_bus_match, - .probe = vme_bus_probe, - .remove = vme_bus_remove, -}; -EXPORT_SYMBOL(vme_bus_type); - -static int __init vme_init(void) -{ - return bus_register(&vme_bus_type); -} -subsys_initcall(vme_init); diff --git a/drivers/vme/vme_bridge.h b/drivers/vme/vme_bridge.h deleted file mode 100644 index 42ecf961004e..000000000000 --- a/drivers/vme/vme_bridge.h +++ /dev/null @@ -1,190 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _VME_BRIDGE_H_ -#define _VME_BRIDGE_H_ - -#include <linux/vme.h> - -#define VME_CRCSR_BUF_SIZE (508*1024) -/* - * Resource structures - */ -struct vme_master_resource { - struct list_head list; - struct vme_bridge *parent; - /* - * We are likely to need to access the VME bus in interrupt context, so - * protect master routines with a spinlock rather than a mutex. - */ - spinlock_t lock; - int locked; - int number; - u32 address_attr; - u32 cycle_attr; - u32 width_attr; - struct resource bus_resource; - void __iomem *kern_base; -}; - -struct vme_slave_resource { - struct list_head list; - struct vme_bridge *parent; - struct mutex mtx; - int locked; - int number; - u32 address_attr; - u32 cycle_attr; -}; - -struct vme_dma_pattern { - u32 pattern; - u32 type; -}; - -struct vme_dma_pci { - dma_addr_t address; -}; - -struct vme_dma_vme { - unsigned long long address; - u32 aspace; - u32 cycle; - u32 dwidth; -}; - -struct vme_dma_list { - struct list_head list; - struct vme_dma_resource *parent; - struct list_head entries; - struct mutex mtx; -}; - -struct vme_dma_resource { - struct list_head list; - struct vme_bridge *parent; - struct mutex mtx; - int locked; - int number; - struct list_head pending; - struct list_head running; - u32 route_attr; -}; - -struct vme_lm_resource { - struct list_head list; - struct vme_bridge *parent; - struct mutex mtx; - int locked; - int number; - int monitors; -}; - -struct vme_error_handler { - struct list_head list; - unsigned long long start; /* Beginning of error window */ - unsigned long long end; /* End of error window */ - unsigned long long first_error; /* Address of the first error */ - u32 aspace; /* Address space of error window*/ - unsigned num_errors; /* Number of errors */ -}; - -struct vme_callback { - void (*func)(int, int, void*); - void *priv_data; -}; - -struct vme_irq { - int count; - struct vme_callback callback[VME_NUM_STATUSID]; -}; - -/* Allow 16 characters for name (including null character) */ -#define VMENAMSIZ 16 - -/* This structure stores all the information about one bridge - * The structure should be dynamically allocated by the driver and one instance - * of the structure should be present for each VME chip present in the system. - */ -struct vme_bridge { - char name[VMENAMSIZ]; - int num; - struct list_head master_resources; - struct list_head slave_resources; - struct list_head dma_resources; - struct list_head lm_resources; - - /* List for registered errors handlers */ - struct list_head vme_error_handlers; - /* List of devices on this bridge */ - struct list_head devices; - - /* Bridge Info - XXX Move to private structure? */ - struct device *parent; /* Parent device (eg. pdev->dev for PCI) */ - void *driver_priv; /* Private pointer for the bridge driver */ - struct list_head bus_list; /* list of VME buses */ - - /* Interrupt callbacks */ - struct vme_irq irq[7]; - /* Locking for VME irq callback configuration */ - struct mutex irq_mtx; - - /* Slave Functions */ - int (*slave_get) (struct vme_slave_resource *, int *, - unsigned long long *, unsigned long long *, dma_addr_t *, - u32 *, u32 *); - int (*slave_set) (struct vme_slave_resource *, int, unsigned long long, - unsigned long long, dma_addr_t, u32, u32); - - /* Master Functions */ - int (*master_get) (struct vme_master_resource *, int *, - unsigned long long *, unsigned long long *, u32 *, u32 *, - u32 *); - int (*master_set) (struct vme_master_resource *, int, - unsigned long long, unsigned long long, u32, u32, u32); - ssize_t (*master_read) (struct vme_master_resource *, void *, size_t, - loff_t); - ssize_t (*master_write) (struct vme_master_resource *, void *, size_t, - loff_t); - unsigned int (*master_rmw) (struct vme_master_resource *, unsigned int, - unsigned int, unsigned int, loff_t); - - /* DMA Functions */ - int (*dma_list_add) (struct vme_dma_list *, struct vme_dma_attr *, - struct vme_dma_attr *, size_t); - int (*dma_list_exec) (struct vme_dma_list *); - int (*dma_list_empty) (struct vme_dma_list *); - - /* Interrupt Functions */ - void (*irq_set) (struct vme_bridge *, int, int, int); - int (*irq_generate) (struct vme_bridge *, int, int); - - /* Location monitor functions */ - int (*lm_set) (struct vme_lm_resource *, unsigned long long, u32, u32); - int (*lm_get) (struct vme_lm_resource *, unsigned long long *, u32 *, - u32 *); - int (*lm_attach)(struct vme_lm_resource *, int, - void (*callback)(void *), void *); - int (*lm_detach) (struct vme_lm_resource *, int); - - /* CR/CSR space functions */ - int (*slot_get) (struct vme_bridge *); - - /* Bridge parent interface */ - void *(*alloc_consistent)(struct device *dev, size_t size, - dma_addr_t *dma); - void (*free_consistent)(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma); -}; - -void vme_bus_error_handler(struct vme_bridge *bridge, - unsigned long long address, int am); -void vme_irq_handler(struct vme_bridge *, int, int); - -struct vme_bridge *vme_init_bridge(struct vme_bridge *); -int vme_register_bridge(struct vme_bridge *); -void vme_unregister_bridge(struct vme_bridge *); -struct vme_error_handler *vme_register_error_handler( - struct vme_bridge *bridge, u32 aspace, - unsigned long long address, size_t len); -void vme_unregister_error_handler(struct vme_error_handler *handler); - -#endif /* _VME_BRIDGE_H_ */ |