diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/regulator/da9063-regulator.c | 132 |
1 files changed, 130 insertions, 2 deletions
diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index cf7d5341750e..82f52a2a031a 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -412,6 +412,134 @@ static int da9063_ldo_set_suspend_mode(struct regulator_dev *rdev, return regmap_field_write(regl->suspend_sleep, val); } +static unsigned int da9063_get_overdrive_mask(const struct regulator_desc *desc) +{ + switch (desc->id) { + case DA9063_ID_BCORES_MERGED: + case DA9063_ID_BCORE1: + return DA9063_BCORE1_OD; + case DA9063_ID_BCORE2: + return DA9063_BCORE2_OD; + case DA9063_ID_BPRO: + return DA9063_BPRO_OD; + default: + return 0; + } +} + +static int da9063_buck_set_limit_set_overdrive(struct regulator_dev *rdev, + int min_uA, int max_uA, + unsigned int overdrive_mask) +{ + /* + * When enabling overdrive, do it before changing the current limit to + * ensure sufficient supply throughout the switch. + */ + struct da9063_regulator *regl = rdev_get_drvdata(rdev); + int ret; + unsigned int orig_overdrive; + + ret = regmap_read(regl->hw->regmap, DA9063_REG_CONFIG_H, + &orig_overdrive); + if (ret < 0) + return ret; + orig_overdrive &= overdrive_mask; + + if (orig_overdrive == 0) { + ret = regmap_set_bits(regl->hw->regmap, DA9063_REG_CONFIG_H, + overdrive_mask); + if (ret < 0) + return ret; + } + + ret = regulator_set_current_limit_regmap(rdev, min_uA / 2, max_uA / 2); + if (ret < 0 && orig_overdrive == 0) + /* + * regulator_set_current_limit_regmap may have rejected the + * change because of unusable min_uA and/or max_uA inputs. + * Attempt to restore original overdrive state, ignore failure- + * on-failure. + */ + regmap_clear_bits(regl->hw->regmap, DA9063_REG_CONFIG_H, + overdrive_mask); + + return ret; +} + +static int da9063_buck_set_limit_clear_overdrive(struct regulator_dev *rdev, + int min_uA, int max_uA, + unsigned int overdrive_mask) +{ + /* + * When disabling overdrive, do it after changing the current limit to + * ensure sufficient supply throughout the switch. + */ + struct da9063_regulator *regl = rdev_get_drvdata(rdev); + int ret, orig_limit; + + ret = regmap_read(rdev->regmap, rdev->desc->csel_reg, &orig_limit); + if (ret < 0) + return ret; + + ret = regulator_set_current_limit_regmap(rdev, min_uA, max_uA); + if (ret < 0) + return ret; + + ret = regmap_clear_bits(regl->hw->regmap, DA9063_REG_CONFIG_H, + overdrive_mask); + if (ret < 0) + /* + * Attempt to restore original current limit, ignore failure- + * on-failure. + */ + regmap_write(rdev->regmap, rdev->desc->csel_reg, orig_limit); + + return ret; +} + +static int da9063_buck_set_current_limit(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + unsigned int overdrive_mask, n_currents; + + overdrive_mask = da9063_get_overdrive_mask(rdev->desc); + if (overdrive_mask) { + n_currents = rdev->desc->n_current_limits; + if (n_currents == 0) + return -EINVAL; + + if (max_uA > rdev->desc->curr_table[n_currents - 1]) + return da9063_buck_set_limit_set_overdrive(rdev, min_uA, + max_uA, + overdrive_mask); + + return da9063_buck_set_limit_clear_overdrive(rdev, min_uA, + max_uA, + overdrive_mask); + } + return regulator_set_current_limit_regmap(rdev, min_uA, max_uA); +} + +static int da9063_buck_get_current_limit(struct regulator_dev *rdev) +{ + struct da9063_regulator *regl = rdev_get_drvdata(rdev); + int val, ret, limit; + unsigned int mask; + + limit = regulator_get_current_limit_regmap(rdev); + if (limit < 0) + return limit; + mask = da9063_get_overdrive_mask(rdev->desc); + if (mask) { + ret = regmap_read(regl->hw->regmap, DA9063_REG_CONFIG_H, &val); + if (ret < 0) + return ret; + if (val & mask) + limit *= 2; + } + return limit; +} + static const struct regulator_ops da9063_buck_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -419,8 +547,8 @@ static const struct regulator_ops da9063_buck_ops = { .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, .list_voltage = regulator_list_voltage_linear, - .set_current_limit = regulator_set_current_limit_regmap, - .get_current_limit = regulator_get_current_limit_regmap, + .set_current_limit = da9063_buck_set_current_limit, + .get_current_limit = da9063_buck_get_current_limit, .set_mode = da9063_buck_set_mode, .get_mode = da9063_buck_get_mode, .get_status = da9063_buck_get_status, |