diff options
Diffstat (limited to 'drivers')
33 files changed, 379 insertions, 247 deletions
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 388978775be0..710fbef9a9c2 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -542,8 +542,8 @@ int i2c_pca_add_numbered_bus(struct i2c_adapter *adap) } EXPORT_SYMBOL(i2c_pca_add_numbered_bus); -MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>, " - "Wolfram Sang <kernel@pengutronix.de>"); +MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>"); +MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>"); MODULE_DESCRIPTION("I2C-Bus PCA9564/PCA9665 algorithm"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 88639e52c73a..293e7a0760e7 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -146,6 +146,7 @@ config I2C_I801 Elkhart Lake (PCH) Tiger Lake (PCH) Jasper Lake (SOC) + Emmitsburg (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index a43deea390f5..fb93152845f4 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -519,9 +519,9 @@ static struct pci_driver ali1535_driver = { module_pci_driver(ali1535_driver); -MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " - "Philip Edelbrock <phil@netroedge.com>, " - "Mark D. Studebaker <mdsxyz123@yahoo.com> " - "and Dan Eaton <dan.eaton@rocketlogix.com>"); +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); +MODULE_AUTHOR("Philip Edelbrock <phil@netroedge.com>"); +MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_AUTHOR("Dan Eaton <dan.eaton@rocketlogix.com>"); MODULE_DESCRIPTION("ALI1535 SMBus driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 02185a1cfa77..cc58feacd082 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -502,8 +502,8 @@ static struct pci_driver ali15x3_driver = { module_pci_driver(ali15x3_driver); -MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, " - "Philip Edelbrock <phil@netroedge.com>, " - "and Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); +MODULE_AUTHOR("Philip Edelbrock <phil@netroedge.com>"); +MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>"); MODULE_DESCRIPTION("ALI15X3 SMBus driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 2b14fef5bf26..34862ad3423e 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -381,7 +381,7 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, if (status) return status; len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX); - /* fall through */ + fallthrough; case I2C_SMBUS_I2C_BLOCK_DATA: for (i = 0; i < len; i++) { status = amd_ec_read(smbus, AMD_SMB_DATA + i, diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index f51702d86a90..31268074c422 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -504,7 +504,7 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) goto error_and_stop; } irq_handled |= ASPEED_I2CD_INTR_TX_ACK; - /* fall through */ + fallthrough; case ASPEED_I2C_MASTER_TX_FIRST: if (bus->buf_index < msg->len) { bus->master_state = ASPEED_I2C_MASTER_TX; @@ -520,7 +520,7 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) /* RX may not have completed yet (only address cycle) */ if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE)) goto out_no_complete; - /* fall through */ + fallthrough; case ASPEED_I2C_MASTER_RX: if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) { dev_err(bus->dev, "master failed to RX\n"); diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c index 363d540a8345..66864f9cf7ac 100644 --- a/drivers/i2c/busses/i2c-at91-master.c +++ b/drivers/i2c/busses/i2c-at91-master.c @@ -816,79 +816,16 @@ error: return ret; } -static void at91_prepare_twi_recovery(struct i2c_adapter *adap) -{ - struct at91_twi_dev *dev = i2c_get_adapdata(adap); - - pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio); -} - -static void at91_unprepare_twi_recovery(struct i2c_adapter *adap) -{ - struct at91_twi_dev *dev = i2c_get_adapdata(adap); - - pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default); -} - static int at91_init_twi_recovery_gpio(struct platform_device *pdev, struct at91_twi_dev *dev) { struct i2c_bus_recovery_info *rinfo = &dev->rinfo; - dev->pinctrl = devm_pinctrl_get(&pdev->dev); - if (!dev->pinctrl || IS_ERR(dev->pinctrl)) { + rinfo->pinctrl = devm_pinctrl_get(&pdev->dev); + if (!rinfo->pinctrl || IS_ERR(rinfo->pinctrl)) { dev_info(dev->dev, "can't get pinctrl, bus recovery not supported\n"); - return PTR_ERR(dev->pinctrl); + return PTR_ERR(rinfo->pinctrl); } - - dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl, - PINCTRL_STATE_DEFAULT); - dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl, - "gpio"); - if (IS_ERR(dev->pinctrl_pins_default) || - IS_ERR(dev->pinctrl_pins_gpio)) { - dev_info(&pdev->dev, "pinctrl states incomplete for recovery\n"); - return -EINVAL; - } - - /* - * pins will be taken as GPIO, so we might as well inform pinctrl about - * this and move the state to GPIO - */ - pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio); - - rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN); - if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER) - return -EPROBE_DEFER; - - rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl", - GPIOD_OUT_HIGH_OPEN_DRAIN); - if (PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER) - return -EPROBE_DEFER; - - if (IS_ERR(rinfo->sda_gpiod) || - IS_ERR(rinfo->scl_gpiod)) { - dev_info(&pdev->dev, "recovery information incomplete\n"); - if (!IS_ERR(rinfo->sda_gpiod)) { - gpiod_put(rinfo->sda_gpiod); - rinfo->sda_gpiod = NULL; - } - if (!IS_ERR(rinfo->scl_gpiod)) { - gpiod_put(rinfo->scl_gpiod); - rinfo->scl_gpiod = NULL; - } - pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default); - return -EINVAL; - } - - /* change the state of the pins back to their default state */ - pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default); - - dev_info(&pdev->dev, "using scl, sda for recovery\n"); - - rinfo->prepare_recovery = at91_prepare_twi_recovery; - rinfo->unprepare_recovery = at91_unprepare_twi_recovery; - rinfo->recover_bus = i2c_generic_scl_recovery; dev->adapter.bus_recovery_info = rinfo; return 0; diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h index 7e7b4955ca7f..eae673ae786c 100644 --- a/drivers/i2c/busses/i2c-at91.h +++ b/drivers/i2c/busses/i2c-at91.h @@ -157,9 +157,6 @@ struct at91_twi_dev { struct at91_twi_dma dma; bool slave_detected; struct i2c_bus_recovery_info rinfo; - struct pinctrl *pinctrl; - struct pinctrl_state *pinctrl_pins_default; - struct pinctrl_state *pinctrl_pins_gpio; #ifdef CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL unsigned smr; struct i2c_client *slave; diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index 8a3c98866fb7..688e92818821 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -1078,7 +1078,7 @@ static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave) if (!iproc_i2c->slave) return -EINVAL; - iproc_i2c->slave = NULL; + disable_irq(iproc_i2c->irq); /* disable all slave interrupts */ tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); @@ -1091,6 +1091,17 @@ static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave) tmp &= ~BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT); iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, tmp); + /* flush TX/RX FIFOs */ + tmp = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT)); + iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, tmp); + + /* clear all pending slave interrupts */ + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE); + + iproc_i2c->slave = NULL; + + enable_irq(iproc_i2c->irq); + return 0; } diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index d9b86fcc3825..5dc519516292 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -392,7 +392,7 @@ static const struct i2c_algorithm bcm2835_i2c_algo = { /* * The BCM2835 was reported to have problems with clock stretching: - * http://www.advamation.com/knowhow/raspberrypi/rpi-i2c-bug.html + * https://www.advamation.com/knowhow/raspberrypi/rpi-i2c-bug.html * https://www.raspberrypi.org/forums/viewtopic.php?p=146272 */ static const struct i2c_adapter_quirks bcm2835_i2c_quirks = { diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 8522134f9ea9..55c83a7a24f3 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -90,7 +90,7 @@ static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c) switch (pdev->device) { case 0x0817: dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ; - /* fall through */ + fallthrough; case 0x0818: case 0x0819: c->bus_num = pdev->device - 0x817 + 3; diff --git a/drivers/i2c/busses/i2c-digicolor.c b/drivers/i2c/busses/i2c-digicolor.c index 332f00437479..f67639dc74b7 100644 --- a/drivers/i2c/busses/i2c-digicolor.c +++ b/drivers/i2c/busses/i2c-digicolor.c @@ -187,7 +187,7 @@ static irqreturn_t dc_i2c_irq(int irq, void *dev_id) break; } i2c->state = STATE_WRITE; - /* fall through */ + fallthrough; case STATE_WRITE: if (i2c->msgbuf_ptr < i2c->msg->len) dc_i2c_write_buf(i2c); diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index 73f139690e4e..843b31a0f752 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -846,11 +846,10 @@ static void pch_i2c_remove(struct pci_dev *pdev) kfree(adap_info); } -#ifdef CONFIG_PM -static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state) +static int __maybe_unused pch_i2c_suspend(struct device *dev) { - int ret; int i; + struct pci_dev *pdev = to_pci_dev(dev); struct adapter_info *adap_info = pci_get_drvdata(pdev); void __iomem *p = adap_info->pch_data[0].pch_base_address; @@ -872,34 +871,13 @@ static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state) ioread32(p + PCH_I2CSR), ioread32(p + PCH_I2CBUFSTA), ioread32(p + PCH_I2CESRSTA)); - ret = pci_save_state(pdev); - - if (ret) { - pch_pci_err(pdev, "pci_save_state\n"); - return ret; - } - - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - return 0; } -static int pch_i2c_resume(struct pci_dev *pdev) +static int __maybe_unused pch_i2c_resume(struct device *dev) { int i; - struct adapter_info *adap_info = pci_get_drvdata(pdev); - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - - if (pci_enable_device(pdev) < 0) { - pch_pci_err(pdev, "pch_i2c_resume:pci_enable_device FAILED\n"); - return -EIO; - } - - pci_enable_wake(pdev, PCI_D3hot, 0); + struct adapter_info *adap_info = dev_get_drvdata(dev); for (i = 0; i < adap_info->ch_num; i++) pch_i2c_init(&adap_info->pch_data[i]); @@ -908,18 +886,15 @@ static int pch_i2c_resume(struct pci_dev *pdev) return 0; } -#else -#define pch_i2c_suspend NULL -#define pch_i2c_resume NULL -#endif + +static SIMPLE_DEV_PM_OPS(pch_i2c_pm_ops, pch_i2c_suspend, pch_i2c_resume); static struct pci_driver pch_pcidriver = { .name = KBUILD_MODNAME, .id_table = pch_pcidev_id, .probe = pch_i2c_probe, .remove = pch_i2c_remove, - .suspend = pch_i2c_suspend, - .resume = pch_i2c_resume + .driver.pm = &pch_i2c_pm_ops, }; module_pci_driver(pch_pcidriver); diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c index 1a319352e51b..a08554c1a570 100644 --- a/drivers/i2c/busses/i2c-emev2.c +++ b/drivers/i2c/busses/i2c-emev2.c @@ -442,6 +442,7 @@ static struct platform_driver em_i2c_driver = { module_platform_driver(em_i2c_driver); MODULE_DESCRIPTION("EMEV2 I2C bus driver"); -MODULE_AUTHOR("Ian Molton and Wolfram Sang <wsa@sang-engineering.com>"); +MODULE_AUTHOR("Ian Molton"); +MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>"); MODULE_LICENSE("GPL v2"); MODULE_DEVICE_TABLE(of, em_i2c_ids); diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c index 977d6f524649..10332693edf0 100644 --- a/drivers/i2c/busses/i2c-fsi.c +++ b/drivers/i2c/busses/i2c-fsi.c @@ -703,7 +703,7 @@ static int fsi_i2c_probe(struct device *dev) for (port_no = 0; port_no < ports; port_no++) { np = fsi_i2c_find_port_of_node(dev->of_node, port_no); - if (np && !of_device_is_available(np)) + if (!of_device_is_available(np)) continue; port = kzalloc(sizeof(*port), GFP_KERNEL); diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index fea644921a76..e32ef3f01fe8 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -54,6 +54,7 @@ * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes * DNV (SOC) 0x19df 32 hard yes yes yes + * Emmitsburg (PCH) 0x1bc9 32 hard yes yes yes * Broxton (SOC) 0x5ad4 32 hard yes yes yes * Lewisburg (PCH) 0xa1a3 32 hard yes yes yes * Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes @@ -67,6 +68,7 @@ * Comet Lake-H (PCH) 0x06a3 32 hard yes yes yes * Elkhart Lake (PCH) 0x4b23 32 hard yes yes yes * Tiger Lake-LP (PCH) 0xa0a3 32 hard yes yes yes + * Tiger Lake-H (PCH) 0x43a3 32 hard yes yes yes * Jasper Lake (SOC) 0x4da3 32 hard yes yes yes * Comet Lake-V (PCH) 0xa3a3 32 hard yes yes yes * @@ -207,6 +209,7 @@ #define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12 #define PCI_DEVICE_ID_INTEL_CDF_SMBUS 0x18df #define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df +#define PCI_DEVICE_ID_INTEL_EBG_SMBUS 0x1bc9 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */ @@ -221,6 +224,7 @@ #define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS 0x31d4 #define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS 0x34a3 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 +#define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS 0x43a3 #define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23 #define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4 @@ -1062,6 +1066,7 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CDF_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EBG_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) }, @@ -1074,6 +1079,7 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS) }, { 0, } }; @@ -1748,7 +1754,9 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) case PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS: case PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS: case PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS: + case PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS: case PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS: + case PCI_DEVICE_ID_INTEL_EBG_SMBUS: priv->features |= FEATURE_BLOCK_PROC; priv->features |= FEATURE_I2C_BLOCK_READ; priv->features |= FEATURE_IRQ; @@ -1765,19 +1773,19 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1: case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2: priv->features |= FEATURE_IDF; - /* fall through */ + fallthrough; default: priv->features |= FEATURE_BLOCK_PROC; priv->features |= FEATURE_I2C_BLOCK_READ; priv->features |= FEATURE_IRQ; - /* fall through */ + fallthrough; case PCI_DEVICE_ID_INTEL_82801DB_3: priv->features |= FEATURE_SMBUS_PEC; priv->features |= FEATURE_BLOCK_BUFFER; - /* fall through */ + fallthrough; case PCI_DEVICE_ID_INTEL_82801CA_3: priv->features |= FEATURE_HOST_NOTIFY; - /* fall through */ + fallthrough; case PCI_DEVICE_ID_INTEL_82801BA_2: case PCI_DEVICE_ID_INTEL_82801AB_3: case PCI_DEVICE_ID_INTEL_82801AA_3: @@ -1986,7 +1994,8 @@ static void __exit i2c_i801_exit(void) pci_unregister_driver(&i801_driver); } -MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, Jean Delvare <jdelvare@suse.de>"); +MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); MODULE_DESCRIPTION("I801 SMBus driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index deef69e56906..efc14041d45b 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -48,11 +48,13 @@ #define I2C_DMA_CON_TX 0x0000 #define I2C_DMA_CON_RX 0x0001 +#define I2C_DMA_ASYNC_MODE 0x0004 +#define I2C_DMA_SKIP_CONFIG 0x0010 +#define I2C_DMA_DIR_CHANGE 0x0200 #define I2C_DMA_START_EN 0x0001 #define I2C_DMA_INT_FLAG_NONE 0x0000 #define I2C_DMA_CLR_FLAG 0x0000 #define I2C_DMA_HARD_RST 0x0002 -#define I2C_DMA_4G_MODE 0x0001 #define MAX_SAMPLE_CNT_DIV 8 #define MAX_STEP_CNT_DIV 64 @@ -201,10 +203,11 @@ struct mtk_i2c_compatible { unsigned char dcm: 1; unsigned char auto_restart: 1; unsigned char aux_len_reg: 1; - unsigned char support_33bits: 1; unsigned char timing_adjust: 1; unsigned char dma_sync: 1; unsigned char ltiming_adjust: 1; + unsigned char apdma_sync: 1; + unsigned char max_dma_support; }; struct mtk_i2c_ac_timing { @@ -250,14 +253,13 @@ struct mtk_i2c { /** * struct i2c_spec_values: - * min_low_ns: min LOW period of the SCL clock - * min_su_sta_ns: min set-up time for a repeated START condition - * max_hd_dat_ns: max data hold time - * min_su_dat_ns: min data set-up time + * @min_low_ns: min LOW period of the SCL clock + * @min_su_sta_ns: min set-up time for a repeated START condition + * @max_hd_dat_ns: max data hold time + * @min_su_dat_ns: min data set-up time */ struct i2c_spec_values { unsigned int min_low_ns; - unsigned int min_high_ns; unsigned int min_su_sta_ns; unsigned int max_hd_dat_ns; unsigned int min_su_dat_ns; @@ -307,10 +309,11 @@ static const struct mtk_i2c_compatible mt2712_compat = { .dcm = 1, .auto_restart = 1, .aux_len_reg = 1, - .support_33bits = 1, .timing_adjust = 1, .dma_sync = 0, .ltiming_adjust = 0, + .apdma_sync = 0, + .max_dma_support = 33, }; static const struct mtk_i2c_compatible mt6577_compat = { @@ -320,10 +323,11 @@ static const struct mtk_i2c_compatible mt6577_compat = { .dcm = 1, .auto_restart = 0, .aux_len_reg = 0, - .support_33bits = 0, .timing_adjust = 0, .dma_sync = 0, .ltiming_adjust = 0, + .apdma_sync = 0, + .max_dma_support = 32, }; static const struct mtk_i2c_compatible mt6589_compat = { @@ -333,10 +337,11 @@ static const struct mtk_i2c_compatible mt6589_compat = { .dcm = 0, .auto_restart = 0, .aux_len_reg = 0, - .support_33bits = 0, .timing_adjust = 0, .dma_sync = 0, .ltiming_adjust = 0, + .apdma_sync = 0, + .max_dma_support = 32, }; static const struct mtk_i2c_compatible mt7622_compat = { @@ -346,10 +351,11 @@ static const struct mtk_i2c_compatible mt7622_compat = { .dcm = 1, .auto_restart = 1, .aux_len_reg = 1, - .support_33bits = 0, .timing_adjust = 0, .dma_sync = 0, .ltiming_adjust = 0, + .apdma_sync = 0, + .max_dma_support = 32, }; static const struct mtk_i2c_compatible mt8173_compat = { @@ -358,10 +364,11 @@ static const struct mtk_i2c_compatible mt8173_compat = { .dcm = 1, .auto_restart = 1, .aux_len_reg = 1, - .support_33bits = 1, .timing_adjust = 0, .dma_sync = 0, .ltiming_adjust = 0, + .apdma_sync = 0, + .max_dma_support = 33, }; static const struct mtk_i2c_compatible mt8183_compat = { @@ -371,10 +378,25 @@ static const struct mtk_i2c_compatible mt8183_compat = { .dcm = 0, .auto_restart = 1, .aux_len_reg = 1, - .support_33bits = 1, .timing_adjust = 1, .dma_sync = 1, .ltiming_adjust = 1, + .apdma_sync = 0, + .max_dma_support = 33, +}; + +static const struct mtk_i2c_compatible mt8192_compat = { + .quirks = &mt8183_i2c_quirks, + .regs = mt_i2c_regs_v2, + .pmic_i2c = 0, + .dcm = 0, + .auto_restart = 1, + .aux_len_reg = 1, + .timing_adjust = 1, + .dma_sync = 1, + .ltiming_adjust = 1, + .apdma_sync = 1, + .max_dma_support = 36, }; static const struct of_device_id mtk_i2c_of_match[] = { @@ -384,6 +406,7 @@ static const struct of_device_id mtk_i2c_of_match[] = { { .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat }, { .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat }, { .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat }, + { .compatible = "mediatek,mt8192-i2c", .data = &mt8192_compat }, {} }; MODULE_DEVICE_TABLE(of, mtk_i2c_of_match); @@ -786,11 +809,6 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk) return 0; } -static inline u32 mtk_i2c_set_4g_mode(dma_addr_t addr) -{ - return (addr & BIT_ULL(32)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG; -} - static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, int num, int left_num) { @@ -798,6 +816,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, u16 start_reg; u16 control_reg; u16 restart_flag = 0; + u16 dma_sync = 0; u32 reg_4g_mode; u8 *dma_rd_buf = NULL; u8 *dma_wr_buf = NULL; @@ -851,10 +870,16 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, mtk_i2c_writew(i2c, num, OFFSET_TRANSAC_LEN); } + if (i2c->dev_comp->apdma_sync) { + dma_sync = I2C_DMA_SKIP_CONFIG | I2C_DMA_ASYNC_MODE; + if (i2c->op == I2C_MASTER_WRRD) + dma_sync |= I2C_DMA_DIR_CHANGE; + } + /* Prepare buffer data to start transfer */ if (i2c->op == I2C_MASTER_RD) { writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG); - writel(I2C_DMA_CON_RX, i2c->pdmabase + OFFSET_CON); + writel(I2C_DMA_CON_RX | dma_sync, i2c->pdmabase + OFFSET_CON); dma_rd_buf = i2c_get_dma_safe_msg_buf(msgs, 1); if (!dma_rd_buf) @@ -868,8 +893,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, return -ENOMEM; } - if (i2c->dev_comp->support_33bits) { - reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr); + if (i2c->dev_comp->max_dma_support > 32) { + reg_4g_mode = upper_32_bits(rpaddr); writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE); } @@ -877,7 +902,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, writel(msgs->len, i2c->pdmabase + OFFSET_RX_LEN); } else if (i2c->op == I2C_MASTER_WR) { writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG); - writel(I2C_DMA_CON_TX, i2c->pdmabase + OFFSET_CON); + writel(I2C_DMA_CON_TX | dma_sync, i2c->pdmabase + OFFSET_CON); dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 1); if (!dma_wr_buf) @@ -891,8 +916,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, return -ENOMEM; } - if (i2c->dev_comp->support_33bits) { - reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr); + if (i2c->dev_comp->max_dma_support > 32) { + reg_4g_mode = upper_32_bits(wpaddr); writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE); } @@ -900,7 +925,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN); } else { writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_INT_FLAG); - writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_CON); + writel(I2C_DMA_CLR_FLAG | dma_sync, i2c->pdmabase + OFFSET_CON); dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 1); if (!dma_wr_buf) @@ -937,11 +962,11 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs, return -ENOMEM; } - if (i2c->dev_comp->support_33bits) { - reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr); + if (i2c->dev_comp->max_dma_support > 32) { + reg_4g_mode = upper_32_bits(wpaddr); writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE); - reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr); + reg_4g_mode = upper_32_bits(rpaddr); writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE); } @@ -1215,8 +1240,9 @@ static int mtk_i2c_probe(struct platform_device *pdev) return -EINVAL; } - if (i2c->dev_comp->support_33bits) { - ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(33)); + if (i2c->dev_comp->max_dma_support > 32) { + ret = dma_set_mask(&pdev->dev, + DMA_BIT_MASK(i2c->dev_comp->max_dma_support)); if (ret) { dev_err(&pdev->dev, "dma_set_mask return error.\n"); return ret; diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 829b8c98ae51..8d9d4ffdcd24 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -251,7 +251,7 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status) MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK; break; } - /* FALLTHRU */ + fallthrough; case MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */ case MV64XXX_I2C_STATUS_MAST_WR_ACK: /* 0x28 */ if ((drv_data->bytes_left == 0) @@ -282,14 +282,14 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status) MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK; break; } - /* FALLTHRU */ + fallthrough; case MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */ if (drv_data->bytes_left == 0) { drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; drv_data->state = MV64XXX_I2C_STATE_IDLE; break; } - /* FALLTHRU */ + fallthrough; case MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK: /* 0x50 */ if (status != MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK) drv_data->action = MV64XXX_I2C_ACTION_CONTINUE; @@ -417,8 +417,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) "mv64xxx_i2c_do_action: Invalid action: %d\n", drv_data->action); drv_data->rc = -EIO; - - /* FALLTHRU */ + fallthrough; case MV64XXX_I2C_ACTION_SEND_STOP: drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN; writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP, diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c index e1e8d4ef9aa7..d4b1b0865f67 100644 --- a/drivers/i2c/busses/i2c-nomadik.c +++ b/drivers/i2c/busses/i2c-nomadik.c @@ -1122,6 +1122,7 @@ static void __exit nmk_i2c_exit(void) subsys_initcall(nmk_i2c_init); module_exit(nmk_i2c_exit); -MODULE_AUTHOR("Sachin Verma, Srinidhi KASAGAR"); +MODULE_AUTHOR("Sachin Verma"); +MODULE_AUTHOR("Srinidhi KASAGAR"); MODULE_DESCRIPTION("Nomadik/Ux500 I2C driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 69740a4ff1db..8c1b31ed0c42 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -1032,7 +1032,7 @@ static struct pci_driver piix4_driver = { module_pci_driver(piix4_driver); -MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " - "Philip Edelbrock <phil@netroedge.com>"); +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); +MODULE_AUTHOR("Philip Edelbrock <phil@netroedge.com>"); MODULE_DESCRIPTION("PIIX4 SMBus driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 5d7207c10f1d..8c4ec7f13f5a 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -781,7 +781,8 @@ static void __exit i2c_adap_pnx_exit(void) platform_driver_unregister(&i2c_pnx_driver); } -MODULE_AUTHOR("Vitaly Wool, Dennis Kovalev <source@mvista.com>"); +MODULE_AUTHOR("Vitaly Wool"); +MODULE_AUTHOR("Dennis Kovalev <source@mvista.com>"); MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:pnx-i2c"); diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 2e3e1bb75013..9e883474db8c 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -583,13 +583,14 @@ static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv) rcar_i2c_write(priv, ICSIER, SDR | SSR | SAR); } - rcar_i2c_write(priv, ICSSR, ~SAR & 0xff); + /* Clear SSR, too, because of old STOPs to other clients than us */ + rcar_i2c_write(priv, ICSSR, ~(SAR | SSR) & 0xff); } /* master sent stop */ if (ssr_filtered & SSR) { i2c_slave_event(priv->slave, I2C_SLAVE_STOP, &value); - rcar_i2c_write(priv, ICSIER, SAR | SSR); + rcar_i2c_write(priv, ICSIER, SAR); rcar_i2c_write(priv, ICSSR, ~SSR & 0xff); } @@ -853,7 +854,7 @@ static int rcar_reg_slave(struct i2c_client *slave) priv->slave = slave; rcar_i2c_write(priv, ICSAR, slave->addr); rcar_i2c_write(priv, ICSSR, 0); - rcar_i2c_write(priv, ICSIER, SAR | SSR); + rcar_i2c_write(priv, ICSIER, SAR); rcar_i2c_write(priv, ICSCR, SIE | SDBS); return 0; @@ -865,12 +866,14 @@ static int rcar_unreg_slave(struct i2c_client *slave) WARN_ON(!priv->slave); - /* disable irqs and ensure none is running before clearing ptr */ + /* ensure no irq is running before clearing ptr */ + disable_irq(priv->irq); rcar_i2c_write(priv, ICSIER, 0); - rcar_i2c_write(priv, ICSCR, 0); + rcar_i2c_write(priv, ICSSR, 0); + enable_irq(priv->irq); + rcar_i2c_write(priv, ICSCR, SDBS); rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */ - synchronize_irq(priv->irq); priv->slave = NULL; pm_runtime_put(rcar_i2c_priv_to_dev(priv)); diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 15324bfbc6cb..8e3cc85d1921 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -10,6 +10,7 @@ #include <linux/module.h> #include <linux/i2c.h> #include <linux/interrupt.h> +#include <linux/iopoll.h> #include <linux/errno.h> #include <linux/err.h> #include <linux/platform_device.h> @@ -1040,8 +1041,21 @@ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num) return ret; } -static int rk3x_i2c_xfer(struct i2c_adapter *adap, - struct i2c_msg *msgs, int num) +static int rk3x_i2c_wait_xfer_poll(struct rk3x_i2c *i2c) +{ + ktime_t timeout = ktime_add_ms(ktime_get(), WAIT_TIMEOUT); + + while (READ_ONCE(i2c->busy) && + ktime_compare(ktime_get(), timeout) < 0) { + udelay(5); + rk3x_i2c_irq(0, i2c); + } + + return !i2c->busy; +} + +static int rk3x_i2c_xfer_common(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num, bool polling) { struct rk3x_i2c *i2c = (struct rk3x_i2c *)adap->algo_data; unsigned long timeout, flags; @@ -1075,8 +1089,12 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap, rk3x_i2c_start(i2c); - timeout = wait_event_timeout(i2c->wait, !i2c->busy, - msecs_to_jiffies(WAIT_TIMEOUT)); + if (!polling) { + timeout = wait_event_timeout(i2c->wait, !i2c->busy, + msecs_to_jiffies(WAIT_TIMEOUT)); + } else { + timeout = rk3x_i2c_wait_xfer_poll(i2c); + } spin_lock_irqsave(&i2c->lock, flags); @@ -1110,6 +1128,18 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap, return ret < 0 ? ret : num; } +static int rk3x_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + return rk3x_i2c_xfer_common(adap, msgs, num, false); +} + +static int rk3x_i2c_xfer_polling(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + return rk3x_i2c_xfer_common(adap, msgs, num, true); +} + static __maybe_unused int rk3x_i2c_resume(struct device *dev) { struct rk3x_i2c *i2c = dev_get_drvdata(dev); @@ -1126,6 +1156,7 @@ static u32 rk3x_i2c_func(struct i2c_adapter *adap) static const struct i2c_algorithm rk3x_i2c_algorithm = { .master_xfer = rk3x_i2c_xfer, + .master_xfer_atomic = rk3x_i2c_xfer_polling, .functionality = rk3x_i2c_func, }; diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 2cca1b21e26e..cab725559999 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -932,6 +932,7 @@ static void __exit sh_mobile_i2c_adap_exit(void) module_exit(sh_mobile_i2c_adap_exit); MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver"); -MODULE_AUTHOR("Magnus Damm and Wolfram Sang"); +MODULE_AUTHOR("Magnus Damm"); +MODULE_AUTHOR("Wolfram Sang"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:i2c-sh_mobile"); diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c index 9dcea2ba7168..8f71f01cb169 100644 --- a/drivers/i2c/busses/i2c-sibyte.c +++ b/drivers/i2c/busses/i2c-sibyte.c @@ -180,6 +180,7 @@ static void __exit i2c_sibyte_exit(void) module_init(i2c_sibyte_init); module_exit(i2c_sibyte_exit); -MODULE_AUTHOR("Kip Walker (Broadcom Corp.), Steven J. Hill <sjhill@realitydiluted.com>"); +MODULE_AUTHOR("Kip Walker (Broadcom Corp.)"); +MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>"); MODULE_DESCRIPTION("SMBus adapter routines for SiByte boards"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c index d7f72ec331e8..30db8fafe078 100644 --- a/drivers/i2c/busses/i2c-sirf.c +++ b/drivers/i2c/busses/i2c-sirf.c @@ -470,6 +470,6 @@ static struct platform_driver i2c_sirfsoc_driver = { module_platform_driver(i2c_sirfsoc_driver); MODULE_DESCRIPTION("SiRF SoC I2C master controller driver"); -MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>, " - "Xiangzhen Ye <Xiangzhen.Ye@csr.com>"); +MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>"); +MODULE_AUTHOR("Xiangzhen Ye <Xiangzhen.Ye@csr.com>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c index c9a3dba6a75d..31be1811d5e6 100644 --- a/drivers/i2c/busses/i2c-synquacer.c +++ b/drivers/i2c/busses/i2c-synquacer.c @@ -398,8 +398,7 @@ static irqreturn_t synquacer_i2c_isr(int irq, void *dev_id) if (i2c->state == STATE_READ) goto prepare_read; - - /* fall through */ + fallthrough; case STATE_WRITE: if (bsr & SYNQUACER_I2C_BSR_LRB) { diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 15772964a05f..00d3e4d7a01e 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -293,6 +293,8 @@ struct tegra_i2c_dev { bool is_curr_atomic_xfer; }; +static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit); + static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned long reg) { @@ -419,7 +421,7 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev) dma_addr_t dma_phys; int err; - if (!i2c_dev->hw->has_apb_dma) + if (!i2c_dev->hw->has_apb_dma || i2c_dev->is_vi) return 0; if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) { @@ -655,32 +657,47 @@ static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev) if (ret) return ret; - if (!i2c_dev->hw->has_single_clk_source) { - ret = clk_enable(i2c_dev->fast_clk); - if (ret < 0) { - dev_err(i2c_dev->dev, - "Enabling fast clk failed, err %d\n", ret); - return ret; - } + ret = clk_enable(i2c_dev->fast_clk); + if (ret < 0) { + dev_err(i2c_dev->dev, + "Enabling fast clk failed, err %d\n", ret); + return ret; } - if (i2c_dev->slow_clk) { - ret = clk_enable(i2c_dev->slow_clk); - if (ret < 0) { - dev_err(dev, "failed to enable slow clock: %d\n", ret); - return ret; - } + ret = clk_enable(i2c_dev->slow_clk); + if (ret < 0) { + dev_err(dev, "failed to enable slow clock: %d\n", ret); + goto disable_fast_clk; } ret = clk_enable(i2c_dev->div_clk); if (ret < 0) { dev_err(i2c_dev->dev, "Enabling div clk failed, err %d\n", ret); - clk_disable(i2c_dev->fast_clk); - return ret; + goto disable_slow_clk; + } + + /* + * VI I2C device is attached to VE power domain which goes through + * power ON/OFF during PM runtime resume/suspend. So, controller + * should go through reset and need to re-initialize after power + * domain ON. + */ + if (i2c_dev->is_vi) { + ret = tegra_i2c_init(i2c_dev, true); + if (ret) + goto disable_div_clk; } return 0; + +disable_div_clk: + clk_disable(i2c_dev->div_clk); +disable_slow_clk: + clk_disable(i2c_dev->slow_clk); +disable_fast_clk: + clk_disable(i2c_dev->fast_clk); + return ret; } static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev) @@ -688,12 +705,8 @@ static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev) struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); clk_disable(i2c_dev->div_clk); - - if (i2c_dev->slow_clk) - clk_disable(i2c_dev->slow_clk); - - if (!i2c_dev->hw->has_single_clk_source) - clk_disable(i2c_dev->fast_clk); + clk_disable(i2c_dev->slow_clk); + clk_disable(i2c_dev->fast_clk); return pinctrl_pm_select_idle_state(i2c_dev->dev); } @@ -1716,20 +1729,16 @@ static int tegra_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2c_dev); - if (!i2c_dev->hw->has_single_clk_source) { - ret = clk_prepare(i2c_dev->fast_clk); - if (ret < 0) { - dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret); - return ret; - } + ret = clk_prepare(i2c_dev->fast_clk); + if (ret < 0) { + dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret); + return ret; } - if (i2c_dev->slow_clk) { - ret = clk_prepare(i2c_dev->slow_clk); - if (ret < 0) { - dev_err(dev, "failed to prepare slow clock: %d\n", ret); - goto unprepare_fast_clk; - } + ret = clk_prepare(i2c_dev->slow_clk); + if (ret < 0) { + dev_err(dev, "failed to prepare slow clock: %d\n", ret); + goto unprepare_fast_clk; } if (i2c_dev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ && @@ -1750,7 +1759,15 @@ static int tegra_i2c_probe(struct platform_device *pdev) goto unprepare_slow_clk; } - pm_runtime_irq_safe(&pdev->dev); + /* + * VI I2C is in VE power domain which is not always on and not + * an IRQ safe. So, IRQ safe device can't be attached to a non-IRQ + * safe domain as it prevents powering off the PM domain. + * Also, VI I2C device don't need to use runtime IRQ safe as it will + * not be used for atomic transfers. + */ + if (!i2c_dev->is_vi) + pm_runtime_irq_safe(&pdev->dev); pm_runtime_enable(&pdev->dev); if (!pm_runtime_enabled(&pdev->dev)) { ret = tegra_i2c_runtime_resume(&pdev->dev); @@ -1835,12 +1852,10 @@ unprepare_div_clk: clk_unprepare(i2c_dev->div_clk); unprepare_slow_clk: - if (i2c_dev->is_vi) - clk_unprepare(i2c_dev->slow_clk); + clk_unprepare(i2c_dev->slow_clk); unprepare_fast_clk: - if (!i2c_dev->hw->has_single_clk_source) - clk_unprepare(i2c_dev->fast_clk); + clk_unprepare(i2c_dev->fast_clk); return ret; } @@ -1859,12 +1874,8 @@ static int tegra_i2c_remove(struct platform_device *pdev) tegra_i2c_runtime_suspend(&pdev->dev); clk_unprepare(i2c_dev->div_clk); - - if (i2c_dev->slow_clk) - clk_unprepare(i2c_dev->slow_clk); - - if (!i2c_dev->hw->has_single_clk_source) - clk_unprepare(i2c_dev->fast_clk); + clk_unprepare(i2c_dev->slow_clk); + clk_unprepare(i2c_dev->fast_clk); tegra_i2c_release_dma(i2c_dev); return 0; diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 4abc7771af06..970ccdcbb889 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -228,7 +228,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, goto exit_unsupported; if (read_write == I2C_SMBUS_READ) outb_p(data->block[0], SMBHSTDAT0); - /* Fall through */ + fallthrough; case I2C_SMBUS_BLOCK_DATA: outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { @@ -489,9 +489,9 @@ static void __exit i2c_vt596_exit(void) } } -MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>, " - "Mark D. Studebaker <mdsxyz123@yahoo.com> and " - "Jean Delvare <jdelvare@suse.de>"); +MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>"); +MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); MODULE_DESCRIPTION("vt82c596 SMBus driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index bd9afa383d12..7b42a18bd05c 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -151,7 +151,7 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) case state_repeat_start: outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1); - /* fallthrough */ + fallthrough; case state_quick: if (iface->address_byte & 1) { diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 26f03a14a478..34a9609f256d 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -32,6 +32,7 @@ #include <linux/of_device.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/pinctrl/consumer.h> #include <linux/pm_domain.h> #include <linux/pm_runtime.h> #include <linux/pm_wakeirq.h> @@ -181,6 +182,8 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap) if (bri->prepare_recovery) bri->prepare_recovery(adap); + if (bri->pinctrl) + pinctrl_select_state(bri->pinctrl, bri->pins_gpio); /* * If we can set SDA, we will always create a STOP to ensure additional @@ -236,6 +239,8 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap) if (bri->unprepare_recovery) bri->unprepare_recovery(adap); + if (bri->pinctrl) + pinctrl_select_state(bri->pinctrl, bri->pins_default); return ret; } @@ -251,13 +256,135 @@ int i2c_recover_bus(struct i2c_adapter *adap) } EXPORT_SYMBOL_GPL(i2c_recover_bus); -static void i2c_init_recovery(struct i2c_adapter *adap) +static void i2c_gpio_init_pinctrl_recovery(struct i2c_adapter *adap) +{ + struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; + struct device *dev = &adap->dev; + struct pinctrl *p = bri->pinctrl; + + /* + * we can't change states without pinctrl, so remove the states if + * populated + */ + if (!p) { + bri->pins_default = NULL; + bri->pins_gpio = NULL; + return; + } + + if (!bri->pins_default) { + bri->pins_default = pinctrl_lookup_state(p, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(bri->pins_default)) { + dev_dbg(dev, PINCTRL_STATE_DEFAULT " state not found for GPIO recovery\n"); + bri->pins_default = NULL; + } + } + if (!bri->pins_gpio) { + bri->pins_gpio = pinctrl_lookup_state(p, "gpio"); + if (IS_ERR(bri->pins_gpio)) + bri->pins_gpio = pinctrl_lookup_state(p, "recovery"); + + if (IS_ERR(bri->pins_gpio)) { + dev_dbg(dev, "no gpio or recovery state found for GPIO recovery\n"); + bri->pins_gpio = NULL; + } + } + + /* for pinctrl state changes, we need all the information */ + if (bri->pins_default && bri->pins_gpio) { + dev_info(dev, "using pinctrl states for GPIO recovery"); + } else { + bri->pinctrl = NULL; + bri->pins_default = NULL; + bri->pins_gpio = NULL; + } +} + +static int i2c_gpio_init_generic_recovery(struct i2c_adapter *adap) +{ + struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; + struct device *dev = &adap->dev; + struct gpio_desc *gpiod; + int ret = 0; + + /* + * don't touch the recovery information if the driver is not using + * generic SCL recovery + */ + if (bri->recover_bus && bri->recover_bus != i2c_generic_scl_recovery) + return 0; + + /* + * pins might be taken as GPIO, so we should inform pinctrl about + * this and move the state to GPIO + */ + if (bri->pinctrl) + pinctrl_select_state(bri->pinctrl, bri->pins_gpio); + + /* + * if there is incomplete or no recovery information, see if generic + * GPIO recovery is available + */ + if (!bri->scl_gpiod) { + gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN); + if (PTR_ERR(gpiod) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto cleanup_pinctrl_state; + } + if (!IS_ERR(gpiod)) { + bri->scl_gpiod = gpiod; + bri->recover_bus = i2c_generic_scl_recovery; + dev_info(dev, "using generic GPIOs for recovery\n"); + } + } + + /* SDA GPIOD line is optional, so we care about DEFER only */ + if (!bri->sda_gpiod) { + /* + * We have SCL. Pull SCL low and wait a bit so that SDA glitches + * have no effect. + */ + gpiod_direction_output(bri->scl_gpiod, 0); + udelay(10); + gpiod = devm_gpiod_get(dev, "sda", GPIOD_IN); + + /* Wait a bit in case of a SDA glitch, and then release SCL. */ + udelay(10); + gpiod_direction_output(bri->scl_gpiod, 1); + + if (PTR_ERR(gpiod) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto cleanup_pinctrl_state; + } + if (!IS_ERR(gpiod)) + bri->sda_gpiod = gpiod; + } + +cleanup_pinctrl_state: + /* change the state of the pins back to their default state */ + if (bri->pinctrl) + pinctrl_select_state(bri->pinctrl, bri->pins_default); + + return ret; +} + +static int i2c_gpio_init_recovery(struct i2c_adapter *adap) +{ + i2c_gpio_init_pinctrl_recovery(adap); + return i2c_gpio_init_generic_recovery(adap); +} + +static int i2c_init_recovery(struct i2c_adapter *adap) { struct i2c_bus_recovery_info *bri = adap->bus_recovery_info; char *err_str; if (!bri) - return; + return 0; + + if (i2c_gpio_init_recovery(adap) == -EPROBE_DEFER) + return -EPROBE_DEFER; if (!bri->recover_bus) { err_str = "no recover_bus() found"; @@ -273,10 +400,7 @@ static void i2c_init_recovery(struct i2c_adapter *adap) if (gpiod_get_direction(bri->sda_gpiod) == 0) bri->set_sda = set_sda_gpio_value; } - return; - } - - if (bri->recover_bus == i2c_generic_scl_recovery) { + } else if (bri->recover_bus == i2c_generic_scl_recovery) { /* Generic SCL recovery */ if (!bri->set_scl || !bri->get_scl) { err_str = "no {get|set}_scl() found"; @@ -288,10 +412,12 @@ static void i2c_init_recovery(struct i2c_adapter *adap) } } - return; + return 0; err: dev_err(&adap->dev, "Not using recovery: %s\n", err_str); adap->bus_recovery_info = NULL; + + return -EINVAL; } static int i2c_smbus_host_notify_to_irq(const struct i2c_client *client) @@ -319,11 +445,9 @@ static int i2c_device_probe(struct device *dev) if (!client) return 0; - driver = to_i2c_driver(dev->driver); - client->irq = client->init_irq; - if (!client->irq && !driver->disable_i2c_core_irq_mapping) { + if (!client->irq) { int irq = -ENOENT; if (client->flags & I2C_CLIENT_HOST_NOTIFY) { @@ -349,6 +473,8 @@ static int i2c_device_probe(struct device *dev) client->irq = irq; } + driver = to_i2c_driver(dev->driver); + /* * An I2C ID table is not mandatory, if and only if, a suitable OF * or ACPI ID table is supplied for the probing device. @@ -1227,7 +1353,7 @@ static int i2c_setup_host_notify_irq_domain(struct i2c_adapter *adap) if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_HOST_NOTIFY)) return 0; - domain = irq_domain_create_linear(adap->dev.fwnode, + domain = irq_domain_create_linear(adap->dev.parent->fwnode, I2C_ADDR_7BITS_COUNT, &i2c_host_notify_irq_ops, adap); if (!domain) @@ -1318,12 +1444,16 @@ static int i2c_register_adapter(struct i2c_adapter *adap) if (res) goto out_reg; - dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name); - pm_runtime_no_callbacks(&adap->dev); pm_suspend_ignore_children(&adap->dev, true); pm_runtime_enable(&adap->dev); + res = i2c_init_recovery(adap); + if (res == -EPROBE_DEFER) + goto out_reg; + + dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name); + #ifdef CONFIG_I2C_COMPAT res = class_compat_create_link(i2c_adapter_compat_class, &adap->dev, adap->dev.parent); @@ -1332,8 +1462,6 @@ static int i2c_register_adapter(struct i2c_adapter *adap) "Failed to create compatibility class link\n"); #endif - i2c_init_recovery(adap); - /* create pre-declared device nodes */ of_i2c_register_devices(adap); i2c_acpi_register_devices(adap); diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index da020acc9bbd..6ceb11cc4be1 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -761,8 +761,8 @@ static void __exit i2c_dev_exit(void) unregister_chrdev_region(MKDEV(I2C_MAJOR, 0), I2C_MINORS); } -MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " - "Simon G. Vogl <simon@tk.uni-linz.ac.at>"); +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); +MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>"); MODULE_DESCRIPTION("I2C /dev entries driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c index 593f2fd39d17..5c7ae421cacf 100644 --- a/drivers/i2c/i2c-slave-eeprom.c +++ b/drivers/i2c/i2c-slave-eeprom.c @@ -66,7 +66,7 @@ static int i2c_slave_eeprom_slave_cb(struct i2c_client *client, case I2C_SLAVE_READ_PROCESSED: /* The previous byte made it to the bus, get next one */ eeprom->buffer_idx++; - /* fallthrough */ + fallthrough; case I2C_SLAVE_READ_REQUESTED: spin_lock(&eeprom->buffer_lock); *val = eeprom->buffer[eeprom->buffer_idx & eeprom->address_mask]; |