diff options
Diffstat (limited to 'include/linux/clk')
| -rw-r--r-- | include/linux/clk/tegra.h | 3 | ||||
| -rw-r--r-- | include/linux/clk/ti.h | 55 |
2 files changed, 29 insertions, 29 deletions
diff --git a/include/linux/clk/tegra.h b/include/linux/clk/tegra.h index 7007a5f48080..d23c9cf26993 100644 --- a/include/linux/clk/tegra.h +++ b/include/linux/clk/tegra.h @@ -125,5 +125,8 @@ extern void tegra210_xusb_pll_hw_control_enable(void); extern void tegra210_xusb_pll_hw_sequence_start(void); extern void tegra210_sata_pll_hw_control_enable(void); extern void tegra210_sata_pll_hw_sequence_start(void); +extern void tegra210_set_sata_pll_seq_sw(bool state); +extern void tegra210_put_utmipll_in_iddq(void); +extern void tegra210_put_utmipll_out_iddq(void); #endif /* __LINUX_CLK_TEGRA_H_ */ diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 6110fe09ed18..d18da839b810 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -19,6 +19,18 @@ #include <linux/clkdev.h> /** + * struct clk_omap_reg - OMAP register declaration + * @offset: offset from the master IP module base address + * @index: index of the master IP module + */ +struct clk_omap_reg { + void __iomem *ptr; + u16 offset; + u8 index; + u8 flags; +}; + +/** * struct dpll_data - DPLL registers and integration data * @mult_div1_reg: register containing the DPLL M and N bitfields * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg @@ -67,12 +79,12 @@ * can be placed into read-only space. */ struct dpll_data { - void __iomem *mult_div1_reg; + struct clk_omap_reg mult_div1_reg; u32 mult_mask; u32 div1_mask; struct clk_hw *clk_bypass; struct clk_hw *clk_ref; - void __iomem *control_reg; + struct clk_omap_reg control_reg; u32 enable_mask; unsigned long last_rounded_rate; u16 last_rounded_m; @@ -84,8 +96,8 @@ struct dpll_data { u16 max_divider; unsigned long max_rate; u8 modes; - void __iomem *autoidle_reg; - void __iomem *idlest_reg; + struct clk_omap_reg autoidle_reg; + struct clk_omap_reg idlest_reg; u32 autoidle_mask; u32 freqsel_mask; u32 idlest_mask; @@ -113,10 +125,10 @@ struct clk_hw_omap; */ struct clk_hw_omap_ops { void (*find_idlest)(struct clk_hw_omap *oclk, - void __iomem **idlest_reg, + struct clk_omap_reg *idlest_reg, u8 *idlest_bit, u8 *idlest_val); void (*find_companion)(struct clk_hw_omap *oclk, - void __iomem **other_reg, + struct clk_omap_reg *other_reg, u8 *other_bit); void (*allow_idle)(struct clk_hw_omap *oclk); void (*deny_idle)(struct clk_hw_omap *oclk); @@ -129,8 +141,6 @@ struct clk_hw_omap_ops { * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) * @flags: see "struct clk.flags possibilities" above * @clksel_reg: for clksel clks, register va containing src/divisor select - * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector - * @clksel: for clksel clks, pointer to struct clksel for this clock * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock * @clkdm_name: clockdomain name that this clock is contained in * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime @@ -141,12 +151,10 @@ struct clk_hw_omap { struct list_head node; unsigned long fixed_rate; u8 fixed_div; - void __iomem *enable_reg; + struct clk_omap_reg enable_reg; u8 enable_bit; u8 flags; - void __iomem *clksel_reg; - u32 clksel_mask; - const struct clksel *clksel; + struct clk_omap_reg clksel_reg; struct dpll_data *dpll_data; const char *clkdm_name; struct clockdomain *clkdm; @@ -172,7 +180,6 @@ struct clk_hw_omap { * should be used. This is a temporary solution - a better approach * would be to associate clock type-specific data with the clock, * similar to the struct dpll_data approach. - * MEMMAP_ADDRESSING: Use memmap addressing to access clock registers. */ #define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ #define CLOCK_IDLE_CONTROL (1 << 1) @@ -180,7 +187,6 @@ struct clk_hw_omap { #define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ #define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ #define CLOCK_CLKOUTX2 (1 << 5) -#define MEMMAP_ADDRESSING (1 << 6) /* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ #define DPLL_LOW_POWER_STOP 0x1 @@ -202,21 +208,12 @@ enum { }; /** - * struct clk_omap_reg - OMAP register declaration - * @offset: offset from the master IP module base address - * @index: index of the master IP module - */ -struct clk_omap_reg { - u16 offset; - u16 index; -}; - -/** * struct ti_clk_ll_ops - low-level ops for clocks * @clk_readl: pointer to register read function * @clk_writel: pointer to register write function * @clkdm_clk_enable: pointer to clockdomain enable function * @clkdm_clk_disable: pointer to clockdomain disable function + * @clkdm_lookup: pointer to clockdomain lookup function * @cm_wait_module_ready: pointer to CM module wait ready function * @cm_split_idlest_reg: pointer to CM module function to split idlest reg * @@ -227,20 +224,20 @@ struct clk_omap_reg { * operations not provided directly by clock drivers. */ struct ti_clk_ll_ops { - u32 (*clk_readl)(void __iomem *reg); - void (*clk_writel)(u32 val, void __iomem *reg); + u32 (*clk_readl)(const struct clk_omap_reg *reg); + void (*clk_writel)(u32 val, const struct clk_omap_reg *reg); int (*clkdm_clk_enable)(struct clockdomain *clkdm, struct clk *clk); int (*clkdm_clk_disable)(struct clockdomain *clkdm, struct clk *clk); + struct clockdomain * (*clkdm_lookup)(const char *name); int (*cm_wait_module_ready)(u8 part, s16 prcm_mod, u16 idlest_reg, u8 idlest_shift); - int (*cm_split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst, - u8 *idlest_reg_id); + int (*cm_split_idlest_reg)(struct clk_omap_reg *idlest_reg, + s16 *prcm_inst, u8 *idlest_reg_id); }; #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) -void omap2_init_clk_clkdm(struct clk_hw *clk); int omap2_clk_disable_autoidle_all(void); int omap2_clk_enable_autoidle_all(void); int omap2_clk_allow_idle(struct clk *clk); |