diff options
Diffstat (limited to 'include/linux/i2c.h')
| -rw-r--r-- | include/linux/i2c.h | 26 |
1 files changed, 16 insertions, 10 deletions
diff --git a/include/linux/i2c.h b/include/linux/i2c.h index c10617bb980a..fc55ea41d323 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -56,7 +56,7 @@ struct property_entry; * on a bus (or read from them). Apart from two basic transfer functions to * transmit one message at a time, a more complex version can be used to * transmit an arbitrary number of messages without interruption. - * @count must be be less than 64k since msg.len is u16. + * @count must be less than 64k since msg.len is u16. */ int i2c_transfer_buffer_flags(const struct i2c_client *client, char *buf, int count, u16 flags); @@ -231,7 +231,6 @@ enum i2c_alert_protocol { * @detect: Callback for device detection * @address_list: The I2C addresses to probe (for detect) * @clients: List of detected clients we created (for i2c-core use only) - * @disable_i2c_core_irq_mapping: Tell the i2c-core to not do irq-mapping * * The driver.owner field should be set to the module owner of this driver. * The driver.name field should be set to the name of this driver. @@ -290,8 +289,6 @@ struct i2c_driver { int (*detect)(struct i2c_client *client, struct i2c_board_info *info); const unsigned short *address_list; struct list_head clients; - - bool disable_i2c_core_irq_mapping; }; #define to_i2c_driver(d) container_of(d, struct i2c_driver, driver) @@ -408,7 +405,7 @@ static inline bool i2c_detect_slave_mode(struct device *dev) { return false; } * that are present. This information is used to grow the driver model tree. * For mainboards this is done statically using i2c_register_board_info(); * bus numbers identify adapters that aren't yet available. For add-on boards, - * i2c_new_device() does this dynamically with the adapter already known. + * i2c_new_client_device() does this dynamically with the adapter already known. */ struct i2c_board_info { char type[I2C_NAME_SIZE]; @@ -439,14 +436,12 @@ struct i2c_board_info { #if IS_ENABLED(CONFIG_I2C) -/* Add-on boards should register/unregister their devices; e.g. a board +/* + * Add-on boards should register/unregister their devices; e.g. a board * with integrated I2C, a config eeprom, sensors, and a codec that's * used in conjunction with the primary hardware. */ struct i2c_client * -i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info); - -struct i2c_client * i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *info); /* If you don't know the exact address of an I2C device, use this variant @@ -611,6 +606,14 @@ struct i2c_timings { * may configure padmux here for SDA/SCL line or something else they want. * @scl_gpiod: gpiod of the SCL line. Only required for GPIO recovery. * @sda_gpiod: gpiod of the SDA line. Only required for GPIO recovery. + * @pinctrl: pinctrl used by GPIO recovery to change the state of the I2C pins. + * Optional. + * @pins_default: default pinctrl state of SCL/SDA lines, when they are assigned + * to the I2C bus. Optional. Populated internally for GPIO recovery, if + * state with the name PINCTRL_STATE_DEFAULT is found and pinctrl is valid. + * @pins_gpio: recovery pinctrl state of SCL/SDA lines, when they are used as + * GPIOs. Optional. Populated internally for GPIO recovery, if this state + * is called "gpio" or "recovery" and pinctrl is valid. */ struct i2c_bus_recovery_info { int (*recover_bus)(struct i2c_adapter *adap); @@ -627,6 +630,9 @@ struct i2c_bus_recovery_info { /* gpio recovery */ struct gpio_desc *scl_gpiod; struct gpio_desc *sda_gpiod; + struct pinctrl *pinctrl; + struct pinctrl_state *pins_default; + struct pinctrl_state *pins_gpio; }; int i2c_recover_bus(struct i2c_adapter *adap); @@ -1003,7 +1009,7 @@ static inline u32 i2c_acpi_find_bus_speed(struct device *dev) static inline struct i2c_client *i2c_acpi_new_device(struct device *dev, int index, struct i2c_board_info *info) { - return NULL; + return ERR_PTR(-ENODEV); } static inline struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle) { |