diff options
Diffstat (limited to 'include/linux/platform_data')
| -rw-r--r-- | include/linux/platform_data/dma-dw.h | 12 | ||||
| -rw-r--r-- | include/linux/platform_data/dma-imx.h | 1 | ||||
| -rw-r--r-- | include/linux/platform_data/mlxreg.h | 19 | ||||
| -rw-r--r-- | include/linux/platform_data/wilco-ec.h | 144 | ||||
| -rw-r--r-- | include/linux/platform_data/x86/clk-lpss.h (renamed from include/linux/platform_data/clk-lpss.h) | 0 |
5 files changed, 165 insertions, 11 deletions
diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h index 1a1d58ebffbf..f3eaf9ec00a1 100644 --- a/include/linux/platform_data/dma-dw.h +++ b/include/linux/platform_data/dma-dw.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Driver for the Synopsys DesignWare DMA Controller * * Copyright (C) 2007 Atmel Corporation * Copyright (C) 2010-2011 ST Microelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _PLATFORM_DATA_DMA_DW_H #define _PLATFORM_DATA_DMA_DW_H @@ -38,10 +35,6 @@ struct dw_dma_slave { /** * struct dw_dma_platform_data - Controller configuration parameters * @nr_channels: Number of channels supported by hardware (max 8) - * @is_private: The device channels should be marked as private and not for - * by the general purpose DMA channel allocator. - * @is_memcpy: The device channels do support memory-to-memory transfers. - * @is_idma32: The type of the DMA controller is iDMA32 * @chan_allocation_order: Allocate channels starting from 0 or 7 * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0. * @block_size: Maximum block size supported by the controller @@ -53,9 +46,6 @@ struct dw_dma_slave { */ struct dw_dma_platform_data { unsigned int nr_channels; - bool is_private; - bool is_memcpy; - bool is_idma32; #define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */ #define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */ unsigned char chan_allocation_order; diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index 7d964e787299..9daea8d42a10 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -55,6 +55,7 @@ struct imx_dma_data { int dma_request2; /* secondary DMA request line */ enum sdma_peripheral_type peripheral_type; int priority; + struct device_node *of_node; }; static inline int imx_dma_is_ipu(struct dma_chan *chan) diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h index 1b2f86f96743..6d54fe3bcac9 100644 --- a/include/linux/platform_data/mlxreg.h +++ b/include/linux/platform_data/mlxreg.h @@ -35,6 +35,19 @@ #define __LINUX_PLATFORM_DATA_MLXREG_H #define MLXREG_CORE_LABEL_MAX_SIZE 32 +#define MLXREG_CORE_WD_FEATURE_NOWAYOUT BIT(0) +#define MLXREG_CORE_WD_FEATURE_START_AT_BOOT BIT(1) + +/** + * enum mlxreg_wdt_type - type of HW watchdog + * + * TYPE1 HW watchdog implementation exist in old systems. + * All new systems have TYPE2 HW watchdog. + */ +enum mlxreg_wdt_type { + MLX_WDT_TYPE1, + MLX_WDT_TYPE2, +}; /** * struct mlxreg_hotplug_device - I2C device data: @@ -112,11 +125,17 @@ struct mlxreg_core_item { * @data: instance private data; * @regmap: register map of parent device; * @counter: number of instances; + * @features: supported features of device; + * @version: implementation version; + * @identity: device identity name; */ struct mlxreg_core_platform_data { struct mlxreg_core_data *data; void *regmap; int counter; + u32 features; + u32 version; + char identity[MLXREG_CORE_LABEL_MAX_SIZE]; }; /** diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h new file mode 100644 index 000000000000..446473a46b88 --- /dev/null +++ b/include/linux/platform_data/wilco-ec.h @@ -0,0 +1,144 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * ChromeOS Wilco Embedded Controller + * + * Copyright 2018 Google LLC + */ + +#ifndef WILCO_EC_H +#define WILCO_EC_H + +#include <linux/device.h> +#include <linux/kernel.h> + +/* Message flags for using the mailbox() interface */ +#define WILCO_EC_FLAG_NO_RESPONSE BIT(0) /* EC does not respond */ +#define WILCO_EC_FLAG_EXTENDED_DATA BIT(1) /* EC returns 256 data bytes */ +#define WILCO_EC_FLAG_RAW_REQUEST BIT(2) /* Do not trim request data */ +#define WILCO_EC_FLAG_RAW_RESPONSE BIT(3) /* Do not trim response data */ +#define WILCO_EC_FLAG_RAW (WILCO_EC_FLAG_RAW_REQUEST | \ + WILCO_EC_FLAG_RAW_RESPONSE) + +/* Normal commands have a maximum 32 bytes of data */ +#define EC_MAILBOX_DATA_SIZE 32 +/* Extended commands have 256 bytes of response data */ +#define EC_MAILBOX_DATA_SIZE_EXTENDED 256 + +/** + * struct wilco_ec_device - Wilco Embedded Controller handle. + * @dev: Device handle. + * @mailbox_lock: Mutex to ensure one mailbox command at a time. + * @io_command: I/O port for mailbox command. Provided by ACPI. + * @io_data: I/O port for mailbox data. Provided by ACPI. + * @io_packet: I/O port for mailbox packet data. Provided by ACPI. + * @data_buffer: Buffer used for EC communication. The same buffer + * is used to hold the request and the response. + * @data_size: Size of the data buffer used for EC communication. + * @debugfs_pdev: The child platform_device used by the debugfs sub-driver. + * @rtc_pdev: The child platform_device used by the RTC sub-driver. + */ +struct wilco_ec_device { + struct device *dev; + struct mutex mailbox_lock; + struct resource *io_command; + struct resource *io_data; + struct resource *io_packet; + void *data_buffer; + size_t data_size; + struct platform_device *debugfs_pdev; + struct platform_device *rtc_pdev; +}; + +/** + * struct wilco_ec_request - Mailbox request message format. + * @struct_version: Should be %EC_MAILBOX_PROTO_VERSION + * @checksum: Sum of all bytes must be 0. + * @mailbox_id: Mailbox identifier, specifies the command set. + * @mailbox_version: Mailbox interface version %EC_MAILBOX_VERSION + * @reserved: Set to zero. + * @data_size: Length of request, data + last 2 bytes of the header. + * @command: Mailbox command code, unique for each mailbox_id set. + * @reserved_raw: Set to zero for most commands, but is used by + * some command types and for raw commands. + */ +struct wilco_ec_request { + u8 struct_version; + u8 checksum; + u16 mailbox_id; + u8 mailbox_version; + u8 reserved; + u16 data_size; + u8 command; + u8 reserved_raw; +} __packed; + +/** + * struct wilco_ec_response - Mailbox response message format. + * @struct_version: Should be %EC_MAILBOX_PROTO_VERSION + * @checksum: Sum of all bytes must be 0. + * @result: Result code from the EC. Non-zero indicates an error. + * @data_size: Length of the response data buffer. + * @reserved: Set to zero. + * @mbox0: EC returned data at offset 0 is unused (always 0) so this byte + * is treated as part of the header instead of the data. + * @data: Response data buffer. Max size is %EC_MAILBOX_DATA_SIZE_EXTENDED. + */ +struct wilco_ec_response { + u8 struct_version; + u8 checksum; + u16 result; + u16 data_size; + u8 reserved[2]; + u8 mbox0; + u8 data[0]; +} __packed; + +/** + * enum wilco_ec_msg_type - Message type to select a set of command codes. + * @WILCO_EC_MSG_LEGACY: Legacy EC messages for standard EC behavior. + * @WILCO_EC_MSG_PROPERTY: Get/Set/Sync EC controlled NVRAM property. + * @WILCO_EC_MSG_TELEMETRY_SHORT: 32 bytes of telemetry data provided by the EC. + * @WILCO_EC_MSG_TELEMETRY_LONG: 256 bytes of telemetry data provided by the EC. + */ +enum wilco_ec_msg_type { + WILCO_EC_MSG_LEGACY = 0x00f0, + WILCO_EC_MSG_PROPERTY = 0x00f2, + WILCO_EC_MSG_TELEMETRY_SHORT = 0x00f5, + WILCO_EC_MSG_TELEMETRY_LONG = 0x00f6, +}; + +/** + * struct wilco_ec_message - Request and response message. + * @type: Mailbox message type. + * @flags: Message flags, e.g. %WILCO_EC_FLAG_NO_RESPONSE. + * @command: Mailbox command code. + * @result: Result code from the EC. Non-zero indicates an error. + * @request_size: Number of bytes to send to the EC. + * @request_data: Buffer containing the request data. + * @response_size: Number of bytes expected from the EC. + * This is 32 by default and 256 if the flag + * is set for %WILCO_EC_FLAG_EXTENDED_DATA + * @response_data: Buffer containing the response data, should be + * response_size bytes and allocated by caller. + */ +struct wilco_ec_message { + enum wilco_ec_msg_type type; + u8 flags; + u8 command; + u8 result; + size_t request_size; + void *request_data; + size_t response_size; + void *response_data; +}; + +/** + * wilco_ec_mailbox() - Send request to the EC and receive the response. + * @ec: Wilco EC device. + * @msg: Wilco EC message. + * + * Return: Number of bytes received or negative error code on failure. + */ +int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg); + +#endif /* WILCO_EC_H */ diff --git a/include/linux/platform_data/clk-lpss.h b/include/linux/platform_data/x86/clk-lpss.h index 23901992b9dd..23901992b9dd 100644 --- a/include/linux/platform_data/clk-lpss.h +++ b/include/linux/platform_data/x86/clk-lpss.h |