diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/filter.h | 2 | ||||
| -rw-r--r-- | include/linux/hid-sensor-hub.h | 1 | ||||
| -rw-r--r-- | include/linux/iio/common/st_sensors.h | 35 | ||||
| -rw-r--r-- | include/linux/iio/iio.h | 35 | ||||
| -rw-r--r-- | include/linux/iio/trigger.h | 21 | ||||
| -rw-r--r-- | include/linux/input.h | 7 | ||||
| -rw-r--r-- | include/linux/irq.h | 2 | ||||
| -rw-r--r-- | include/linux/irqchip/arm-gic-v3.h | 2 | ||||
| -rw-r--r-- | include/linux/key.h | 47 | ||||
| -rw-r--r-- | include/linux/mbus.h | 4 | ||||
| -rw-r--r-- | include/linux/mm_types.h | 3 | ||||
| -rw-r--r-- | include/linux/mod_devicetable.h | 3 | ||||
| -rw-r--r-- | include/linux/netdevice.h | 3 | ||||
| -rw-r--r-- | include/linux/rculist.h | 2 | ||||
| -rw-r--r-- | include/linux/rcupdate.h | 22 | ||||
| -rw-r--r-- | include/linux/sched/mm.h | 16 | ||||
| -rw-r--r-- | include/linux/srcu.h | 1 | ||||
| -rw-r--r-- | include/linux/usb/pd.h | 298 | ||||
| -rw-r--r-- | include/linux/usb/pd_bdo.h | 31 | ||||
| -rw-r--r-- | include/linux/usb/pd_vdo.h | 251 | ||||
| -rw-r--r-- | include/linux/usb/tcpm.h | 204 |
21 files changed, 934 insertions, 56 deletions
diff --git a/include/linux/filter.h b/include/linux/filter.h index d29e58fde364..818a0b26249e 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -728,7 +728,7 @@ void xdp_do_flush_map(void); void bpf_warn_invalid_xdp_action(u32 act); void bpf_warn_invalid_xdp_redirect(u32 ifindex); -struct sock *do_sk_redirect_map(void); +struct sock *do_sk_redirect_map(struct sk_buff *skb); #ifdef CONFIG_BPF_JIT extern int bpf_jit_enable; diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h index fc7aae64dcde..331dc377c275 100644 --- a/include/linux/hid-sensor-hub.h +++ b/include/linux/hid-sensor-hub.h @@ -231,6 +231,7 @@ struct hid_sensor_common { unsigned usage_id; atomic_t data_ready; atomic_t user_requested_state; + atomic_t runtime_pm_enable; int poll_interval; int raw_hystersis; int latency_ms; diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index 7b0fa8b5c120..f9bd6e8ab138 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -131,28 +131,39 @@ struct st_sensor_das { }; /** + * struct st_sensor_int_drdy - ST sensor device drdy line parameters + * @addr: address of INT drdy register. + * @mask: mask to enable drdy line. + * @addr_od: address to enable/disable Open Drain on the INT line. + * @mask_od: mask to enable/disable Open Drain on the INT line. + */ +struct st_sensor_int_drdy { + u8 addr; + u8 mask; + u8 addr_od; + u8 mask_od; +}; + +/** * struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt - * @addr: address of the register. - * @mask_int1: mask to enable/disable IRQ on INT1 pin. - * @mask_int2: mask to enable/disable IRQ on INT2 pin. + * struct int1 - data-ready configuration register for INT1 pin. + * struct int2 - data-ready configuration register for INT2 pin. * @addr_ihl: address to enable/disable active low on the INT lines. * @mask_ihl: mask to enable/disable active low on the INT lines. - * @addr_od: address to enable/disable Open Drain on the INT lines. - * @mask_od: mask to enable/disable Open Drain on the INT lines. - * @addr_stat_drdy: address to read status of DRDY (data ready) interrupt + * struct stat_drdy - status register of DRDY (data ready) interrupt. * struct ig1 - represents the Interrupt Generator 1 of sensors. * @en_addr: address of the enable ig1 register. * @en_mask: mask to write the on/off value for enable. */ struct st_sensor_data_ready_irq { - u8 addr; - u8 mask_int1; - u8 mask_int2; + struct st_sensor_int_drdy int1; + struct st_sensor_int_drdy int2; u8 addr_ihl; u8 mask_ihl; - u8 addr_od; - u8 mask_od; - u8 addr_stat_drdy; + struct { + u8 addr; + u8 mask; + } stat_drdy; struct { u8 en_addr; u8 en_mask; diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index c380daa40c0e..20b61347ea58 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -365,12 +365,9 @@ unsigned int iio_get_time_res(const struct iio_dev *indio_dev); #define INDIO_MAX_RAW_ELEMENTS 4 struct iio_trigger; /* forward declaration */ -struct iio_dev; /** * struct iio_info - constant information about device - * @driver_module: module structure used to ensure correct - * ownership of chrdevs etc * @event_attrs: event control attributes * @attrs: general purpose device attributes * @read_raw: function to request a value from the device. @@ -425,7 +422,6 @@ struct iio_dev; * were flushed and there was an error. **/ struct iio_info { - struct module *driver_module; const struct attribute_group *event_attrs; const struct attribute_group *attrs; @@ -518,6 +514,7 @@ struct iio_buffer_setup_ops { /** * struct iio_dev - industrial I/O device * @id: [INTERN] used to identify device internally + * @driver_module: [INTERN] used to make it harder to undercut users * @modes: [DRIVER] operating modes supported by device * @currentmode: [DRIVER] current operating mode * @dev: [DRIVER] device structure, should be assigned a parent @@ -558,6 +555,7 @@ struct iio_buffer_setup_ops { */ struct iio_dev { int id; + struct module *driver_module; int modes; int currentmode; @@ -604,9 +602,34 @@ struct iio_dev { const struct iio_chan_spec *iio_find_channel_from_si(struct iio_dev *indio_dev, int si); -int iio_device_register(struct iio_dev *indio_dev); +/** + * iio_device_register() - register a device with the IIO subsystem + * @indio_dev: Device structure filled by the device driver + **/ +#define iio_device_register(iio_dev) \ + __iio_device_register((iio_dev), THIS_MODULE) +int __iio_device_register(struct iio_dev *indio_dev, struct module *this_mod); void iio_device_unregister(struct iio_dev *indio_dev); -int devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev); +/** + * devm_iio_device_register - Resource-managed iio_device_register() + * @dev: Device to allocate iio_dev for + * @indio_dev: Device structure filled by the device driver + * + * Managed iio_device_register. The IIO device registered with this + * function is automatically unregistered on driver detach. This function + * calls iio_device_register() internally. Refer to that function for more + * information. + * + * If an iio_dev registered with this function needs to be unregistered + * separately, devm_iio_device_unregister() must be used. + * + * RETURNS: + * 0 on success, negative error number on failure. + */ +#define devm_iio_device_register(dev, indio_dev) \ + __devm_iio_device_register((dev), (indio_dev), THIS_MODULE); +int __devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev, + struct module *this_mod); void devm_iio_device_unregister(struct device *dev, struct iio_dev *indio_dev); int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64 timestamp); int iio_device_claim_direct_mode(struct iio_dev *indio_dev); diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h index 7142d8d6e470..7d5e44518379 100644 --- a/include/linux/iio/trigger.h +++ b/include/linux/iio/trigger.h @@ -23,7 +23,6 @@ struct iio_trigger; /** * struct iio_trigger_ops - operations structure for an iio_trigger. - * @owner: used to monitor usage count of the trigger. * @set_trigger_state: switch on/off the trigger on demand * @try_reenable: function to reenable the trigger when the * use count is zero (may be NULL) @@ -34,7 +33,6 @@ struct iio_trigger; * instances of a given device. **/ struct iio_trigger_ops { - struct module *owner; int (*set_trigger_state)(struct iio_trigger *trig, bool state); int (*try_reenable)(struct iio_trigger *trig); int (*validate_device)(struct iio_trigger *trig, @@ -62,6 +60,7 @@ struct iio_trigger_ops { **/ struct iio_trigger { const struct iio_trigger_ops *ops; + struct module *owner; int id; const char *name; struct device dev; @@ -87,14 +86,14 @@ static inline struct iio_trigger *to_iio_trigger(struct device *d) static inline void iio_trigger_put(struct iio_trigger *trig) { - module_put(trig->ops->owner); + module_put(trig->owner); put_device(&trig->dev); } static inline struct iio_trigger *iio_trigger_get(struct iio_trigger *trig) { get_device(&trig->dev); - __module_get(trig->ops->owner); + __module_get(trig->owner); return trig; } @@ -127,10 +126,16 @@ static inline void *iio_trigger_get_drvdata(struct iio_trigger *trig) * iio_trigger_register() - register a trigger with the IIO core * @trig_info: trigger to be registered **/ -int iio_trigger_register(struct iio_trigger *trig_info); - -int devm_iio_trigger_register(struct device *dev, - struct iio_trigger *trig_info); +#define iio_trigger_register(trig_info) \ + __iio_trigger_register((trig_info), THIS_MODULE) +int __iio_trigger_register(struct iio_trigger *trig_info, + struct module *this_mod); + +#define devm_iio_trigger_register(dev, trig_info) \ + __devm_iio_trigger_register((dev), (trig_info), THIS_MODULE) +int __devm_iio_trigger_register(struct device *dev, + struct iio_trigger *trig_info, + struct module *this_mod); /** * iio_trigger_unregister() - unregister a trigger from the core diff --git a/include/linux/input.h b/include/linux/input.h index fb5e23c7ed98..7c7516eb7d76 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -234,6 +234,10 @@ struct input_dev { #error "SW_MAX and INPUT_DEVICE_ID_SW_MAX do not match" #endif +#if INPUT_PROP_MAX != INPUT_DEVICE_ID_PROP_MAX +#error "INPUT_PROP_MAX and INPUT_DEVICE_ID_PROP_MAX do not match" +#endif + #define INPUT_DEVICE_ID_MATCH_DEVICE \ (INPUT_DEVICE_ID_MATCH_BUS | INPUT_DEVICE_ID_MATCH_VENDOR | INPUT_DEVICE_ID_MATCH_PRODUCT) #define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION \ @@ -469,6 +473,9 @@ int input_get_keycode(struct input_dev *dev, struct input_keymap_entry *ke); int input_set_keycode(struct input_dev *dev, const struct input_keymap_entry *ke); +bool input_match_device_id(const struct input_dev *dev, + const struct input_device_id *id); + void input_enable_softrepeat(struct input_dev *dev, int delay, int period); extern struct class input_class; diff --git a/include/linux/irq.h b/include/linux/irq.h index d4728bf6a537..5ad10948ea95 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -1009,7 +1009,7 @@ void irq_gc_mask_clr_bit(struct irq_data *d); void irq_gc_unmask_enable_reg(struct irq_data *d); void irq_gc_ack_set_bit(struct irq_data *d); void irq_gc_ack_clr_bit(struct irq_data *d); -void irq_gc_mask_disable_reg_and_ack(struct irq_data *d); +void irq_gc_mask_disable_and_ack_set(struct irq_data *d); void irq_gc_eoi(struct irq_data *d); int irq_gc_set_wake(struct irq_data *d, unsigned int on); diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h index 1ea576c8126f..14b74f22d43c 100644 --- a/include/linux/irqchip/arm-gic-v3.h +++ b/include/linux/irqchip/arm-gic-v3.h @@ -372,6 +372,8 @@ #define GITS_BASER_ENTRY_SIZE_SHIFT (48) #define GITS_BASER_ENTRY_SIZE(r) ((((r) >> GITS_BASER_ENTRY_SIZE_SHIFT) & 0x1f) + 1) #define GITS_BASER_ENTRY_SIZE_MASK GENMASK_ULL(52, 48) +#define GITS_BASER_PHYS_52_to_48(phys) \ + (((phys) & GENMASK_ULL(47, 16)) | (((phys) >> 48) & 0xf) << 12) #define GITS_BASER_SHAREABILITY_SHIFT (10) #define GITS_BASER_InnerShareable \ GIC_BASER_SHAREABILITY(GITS_BASER, InnerShareable) diff --git a/include/linux/key.h b/include/linux/key.h index e315e16b6ff8..8a15cabe928d 100644 --- a/include/linux/key.h +++ b/include/linux/key.h @@ -138,6 +138,11 @@ struct key_restriction { struct key_type *keytype; }; +enum key_state { + KEY_IS_UNINSTANTIATED, + KEY_IS_POSITIVE, /* Positively instantiated */ +}; + /*****************************************************************************/ /* * authentication token / access credential / keyring @@ -169,6 +174,7 @@ struct key { * - may not match RCU dereferenced payload * - payload should contain own length */ + short state; /* Key state (+) or rejection error (-) */ #ifdef KEY_DEBUGGING unsigned magic; @@ -176,18 +182,16 @@ struct key { #endif unsigned long flags; /* status flags (change with bitops) */ -#define KEY_FLAG_INSTANTIATED 0 /* set if key has been instantiated */ -#define KEY_FLAG_DEAD 1 /* set if key type has been deleted */ -#define KEY_FLAG_REVOKED 2 /* set if key had been revoked */ -#define KEY_FLAG_IN_QUOTA 3 /* set if key consumes quota */ -#define KEY_FLAG_USER_CONSTRUCT 4 /* set if key is being constructed in userspace */ -#define KEY_FLAG_NEGATIVE 5 /* set if key is negative */ -#define KEY_FLAG_ROOT_CAN_CLEAR 6 /* set if key can be cleared by root without permission */ -#define KEY_FLAG_INVALIDATED 7 /* set if key has been invalidated */ -#define KEY_FLAG_BUILTIN 8 /* set if key is built in to the kernel */ -#define KEY_FLAG_ROOT_CAN_INVAL 9 /* set if key can be invalidated by root without permission */ -#define KEY_FLAG_KEEP 10 /* set if key should not be removed */ -#define KEY_FLAG_UID_KEYRING 11 /* set if key is a user or user session keyring */ +#define KEY_FLAG_DEAD 0 /* set if key type has been deleted */ +#define KEY_FLAG_REVOKED 1 /* set if key had been revoked */ +#define KEY_FLAG_IN_QUOTA 2 /* set if key consumes quota */ +#define KEY_FLAG_USER_CONSTRUCT 3 /* set if key is being constructed in userspace */ +#define KEY_FLAG_ROOT_CAN_CLEAR 4 /* set if key can be cleared by root without permission */ +#define KEY_FLAG_INVALIDATED 5 /* set if key has been invalidated */ +#define KEY_FLAG_BUILTIN 6 /* set if key is built in to the kernel */ +#define KEY_FLAG_ROOT_CAN_INVAL 7 /* set if key can be invalidated by root without permission */ +#define KEY_FLAG_KEEP 8 /* set if key should not be removed */ +#define KEY_FLAG_UID_KEYRING 9 /* set if key is a user or user session keyring */ /* the key type and key description string * - the desc is used to match a key against search criteria @@ -213,7 +217,6 @@ struct key { struct list_head name_link; struct assoc_array keys; }; - int reject_error; }; /* This is set on a keyring to restrict the addition of a link to a key @@ -353,17 +356,27 @@ extern void key_set_timeout(struct key *, unsigned); #define KEY_NEED_SETATTR 0x20 /* Require permission to change attributes */ #define KEY_NEED_ALL 0x3f /* All the above permissions */ +static inline short key_read_state(const struct key *key) +{ + /* Barrier versus mark_key_instantiated(). */ + return smp_load_acquire(&key->state); +} + /** - * key_is_instantiated - Determine if a key has been positively instantiated + * key_is_positive - Determine if a key has been positively instantiated * @key: The key to check. * * Return true if the specified key has been positively instantiated, false * otherwise. */ -static inline bool key_is_instantiated(const struct key *key) +static inline bool key_is_positive(const struct key *key) +{ + return key_read_state(key) == KEY_IS_POSITIVE; +} + +static inline bool key_is_negative(const struct key *key) { - return test_bit(KEY_FLAG_INSTANTIATED, &key->flags) && - !test_bit(KEY_FLAG_NEGATIVE, &key->flags); + return key_read_state(key) < 0; } #define dereference_key_rcu(KEY) \ diff --git a/include/linux/mbus.h b/include/linux/mbus.h index 0d3f14fd2621..4773145246ed 100644 --- a/include/linux/mbus.h +++ b/include/linux/mbus.h @@ -31,8 +31,8 @@ struct mbus_dram_target_info struct mbus_dram_window { u8 cs_index; u8 mbus_attr; - u32 base; - u32 size; + u64 base; + u64 size; } cs[4]; }; diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 46f4ecf5479a..1861ea8dba77 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -445,6 +445,9 @@ struct mm_struct { unsigned long flags; /* Must use atomic bitops to access the bits */ struct core_state *core_state; /* coredumping support */ +#ifdef CONFIG_MEMBARRIER + atomic_t membarrier_state; +#endif #ifdef CONFIG_AIO spinlock_t ioctx_lock; struct kioctx_table __rcu *ioctx_table; diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 694cebb50f72..2657f9f51536 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -293,6 +293,7 @@ struct pcmcia_device_id { #define INPUT_DEVICE_ID_SND_MAX 0x07 #define INPUT_DEVICE_ID_FF_MAX 0x7f #define INPUT_DEVICE_ID_SW_MAX 0x0f +#define INPUT_DEVICE_ID_PROP_MAX 0x1f #define INPUT_DEVICE_ID_MATCH_BUS 1 #define INPUT_DEVICE_ID_MATCH_VENDOR 2 @@ -308,6 +309,7 @@ struct pcmcia_device_id { #define INPUT_DEVICE_ID_MATCH_SNDBIT 0x0400 #define INPUT_DEVICE_ID_MATCH_FFBIT 0x0800 #define INPUT_DEVICE_ID_MATCH_SWBIT 0x1000 +#define INPUT_DEVICE_ID_MATCH_PROPBIT 0x2000 struct input_device_id { @@ -327,6 +329,7 @@ struct input_device_id { kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1]; kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1]; kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1]; + kernel_ulong_t propbit[INPUT_DEVICE_ID_PROP_MAX / BITS_PER_LONG + 1]; kernel_ulong_t driver_info; }; diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index f535779d9dc1..2eaac7d75af4 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3694,6 +3694,9 @@ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name, unsigned char name_assign_type, void (*setup)(struct net_device *), unsigned int txqs, unsigned int rxqs); +int dev_get_valid_name(struct net *net, struct net_device *dev, + const char *name); + #define alloc_netdev(sizeof_priv, name, name_assign_type, setup) \ alloc_netdev_mqs(sizeof_priv, name, name_assign_type, setup, 1, 1) diff --git a/include/linux/rculist.h b/include/linux/rculist.h index b1fd8bf85fdc..2bea1d5e9930 100644 --- a/include/linux/rculist.h +++ b/include/linux/rculist.h @@ -276,7 +276,7 @@ static inline void list_splice_tail_init_rcu(struct list_head *list, #define list_entry_rcu(ptr, type, member) \ container_of(lockless_dereference(ptr), type, member) -/** +/* * Where are list_empty_rcu() and list_first_entry_rcu()? * * Implementing those functions following their counterparts list_empty() and diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index de50d8a4cf41..1a9f70d44af9 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -523,7 +523,7 @@ static inline void rcu_preempt_sleep_check(void) { } * Return the value of the specified RCU-protected pointer, but omit * both the smp_read_barrier_depends() and the READ_ONCE(). This * is useful in cases where update-side locks prevent the value of the - * pointer from changing. Please note that this primitive does -not- + * pointer from changing. Please note that this primitive does *not* * prevent the compiler from repeating this reference or combining it * with other references, so it should not be used without protection * of appropriate locks. @@ -568,7 +568,7 @@ static inline void rcu_preempt_sleep_check(void) { } * is handed off from RCU to some other synchronization mechanism, for * example, reference counting or locking. In C11, it would map to * kill_dependency(). It could be used as follows: - * + * `` * rcu_read_lock(); * p = rcu_dereference(gp); * long_lived = is_long_lived(p); @@ -579,6 +579,7 @@ static inline void rcu_preempt_sleep_check(void) { } * p = rcu_pointer_handoff(p); * } * rcu_read_unlock(); + *`` */ #define rcu_pointer_handoff(p) (p) @@ -778,18 +779,21 @@ static inline notrace void rcu_read_unlock_sched_notrace(void) /** * RCU_INIT_POINTER() - initialize an RCU protected pointer + * @p: The pointer to be initialized. + * @v: The value to initialized the pointer to. * * Initialize an RCU-protected pointer in special cases where readers * do not need ordering constraints on the CPU or the compiler. These * special cases are: * - * 1. This use of RCU_INIT_POINTER() is NULLing out the pointer -or- + * 1. This use of RCU_INIT_POINTER() is NULLing out the pointer *or* * 2. The caller has taken whatever steps are required to prevent - * RCU readers from concurrently accessing this pointer -or- + * RCU readers from concurrently accessing this pointer *or* * 3. The referenced data structure has already been exposed to - * readers either at compile time or via rcu_assign_pointer() -and- - * a. You have not made -any- reader-visible changes to - * this structure since then -or- + * readers either at compile time or via rcu_assign_pointer() *and* + * + * a. You have not made *any* reader-visible changes to + * this structure since then *or* * b. It is OK for readers accessing this structure from its * new location to see the old state of the structure. (For * example, the changes were to statistical counters or to @@ -805,7 +809,7 @@ static inline notrace void rcu_read_unlock_sched_notrace(void) * by a single external-to-structure RCU-protected pointer, then you may * use RCU_INIT_POINTER() to initialize the internal RCU-protected * pointers, but you must use rcu_assign_pointer() to initialize the - * external-to-structure pointer -after- you have completely initialized + * external-to-structure pointer *after* you have completely initialized * the reader-accessible portions of the linked structure. * * Note that unlike rcu_assign_pointer(), RCU_INIT_POINTER() provides no @@ -819,6 +823,8 @@ static inline notrace void rcu_read_unlock_sched_notrace(void) /** * RCU_POINTER_INITIALIZER() - statically initialize an RCU protected pointer + * @p: The pointer to be initialized. + * @v: The value to initialized the pointer to. * * GCC-style initialization for an RCU-protected pointer in a structure field. */ diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h index ae53e413fb13..ab9bf7b73954 100644 --- a/include/linux/sched/mm.h +++ b/include/linux/sched/mm.h @@ -211,4 +211,20 @@ static inline void memalloc_noreclaim_restore(unsigned int flags) current->flags = (current->flags & ~PF_MEMALLOC) | flags; } +#ifdef CONFIG_MEMBARRIER +enum { + MEMBARRIER_STATE_PRIVATE_EXPEDITED_READY = (1U << 0), + MEMBARRIER_STATE_SWITCH_MM = (1U << 1), +}; + +static inline void membarrier_execve(struct task_struct *t) +{ + atomic_set(&t->mm->membarrier_state, 0); +} +#else +static inline void membarrier_execve(struct task_struct *t) +{ +} +#endif + #endif /* _LINUX_SCHED_MM_H */ diff --git a/include/linux/srcu.h b/include/linux/srcu.h index 39af9bc0f653..62be8966e837 100644 --- a/include/linux/srcu.h +++ b/include/linux/srcu.h @@ -78,6 +78,7 @@ void synchronize_srcu(struct srcu_struct *sp); /** * srcu_read_lock_held - might we be in SRCU read-side critical section? + * @sp: The srcu_struct structure to check * * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an SRCU * read-side critical section. In absence of CONFIG_DEBUG_LOCK_ALLOC, diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h new file mode 100644 index 000000000000..e00051ced806 --- /dev/null +++ b/include/linux/usb/pd.h @@ -0,0 +1,298 @@ +/* + * Copyright 2015-2017 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_USB_PD_H +#define __LINUX_USB_PD_H + +#include <linux/types.h> +#include <linux/usb/typec.h> + +/* USB PD Messages */ +enum pd_ctrl_msg_type { + /* 0 Reserved */ + PD_CTRL_GOOD_CRC = 1, + PD_CTRL_GOTO_MIN = 2, + PD_CTRL_ACCEPT = 3, + PD_CTRL_REJECT = 4, + PD_CTRL_PING = 5, + PD_CTRL_PS_RDY = 6, + PD_CTRL_GET_SOURCE_CAP = 7, + PD_CTRL_GET_SINK_CAP = 8, + PD_CTRL_DR_SWAP = 9, + PD_CTRL_PR_SWAP = 10, + PD_CTRL_VCONN_SWAP = 11, + PD_CTRL_WAIT = 12, + PD_CTRL_SOFT_RESET = 13, + /* 14-15 Reserved */ +}; + +enum pd_data_msg_type { + /* 0 Reserved */ + PD_DATA_SOURCE_CAP = 1, + PD_DATA_REQUEST = 2, + PD_DATA_BIST = 3, + PD_DATA_SINK_CAP = 4, + /* 5-14 Reserved */ + PD_DATA_VENDOR_DEF = 15, +}; + +#define PD_REV10 0x0 +#define PD_REV20 0x1 + +#define PD_HEADER_CNT_SHIFT 12 +#define PD_HEADER_CNT_MASK 0x7 +#define PD_HEADER_ID_SHIFT 9 +#define PD_HEADER_ID_MASK 0x7 +#define PD_HEADER_PWR_ROLE BIT(8) +#define PD_HEADER_REV_SHIFT 6 +#define PD_HEADER_REV_MASK 0x3 +#define PD_HEADER_DATA_ROLE BIT(5) +#define PD_HEADER_TYPE_SHIFT 0 +#define PD_HEADER_TYPE_MASK 0xf + +#define PD_HEADER(type, pwr, data, id, cnt) \ + ((((type) & PD_HEADER_TYPE_MASK) << PD_HEADER_TYPE_SHIFT) | \ + ((pwr) == TYPEC_SOURCE ? PD_HEADER_PWR_ROLE : 0) | \ + ((data) == TYPEC_HOST ? PD_HEADER_DATA_ROLE : 0) | \ + (PD_REV20 << PD_HEADER_REV_SHIFT) | \ + (((id) & PD_HEADER_ID_MASK) << PD_HEADER_ID_SHIFT) | \ + (((cnt) & PD_HEADER_CNT_MASK) << PD_HEADER_CNT_SHIFT)) + +#define PD_HEADER_LE(type, pwr, data, id, cnt) \ + cpu_to_le16(PD_HEADER((type), (pwr), (data), (id), (cnt))) + +static inline unsigned int pd_header_cnt(u16 header) +{ + return (header >> PD_HEADER_CNT_SHIFT) & PD_HEADER_CNT_MASK; +} + +static inline unsigned int pd_header_cnt_le(__le16 header) +{ + return pd_header_cnt(le16_to_cpu(header)); +} + +static inline unsigned int pd_header_type(u16 header) +{ + return (header >> PD_HEADER_TYPE_SHIFT) & PD_HEADER_TYPE_MASK; +} + +static inline unsigned int pd_header_type_le(__le16 header) +{ + return pd_header_type(le16_to_cpu(header)); +} + +static inline unsigned int pd_header_msgid(u16 header) +{ + return (header >> PD_HEADER_ID_SHIFT) & PD_HEADER_ID_MASK; +} + +static inline unsigned int pd_header_msgid_le(__le16 header) +{ + return pd_header_msgid(le16_to_cpu(header)); +} + +#define PD_MAX_PAYLOAD 7 + +/** + * struct pd_message - PD message as seen on wire + * @header: PD message header + * @payload: PD message payload + */ +struct pd_message { + __le16 header; + __le32 payload[PD_MAX_PAYLOAD]; +} __packed; + +/* PDO: Power Data Object */ +#define PDO_MAX_OBJECTS 7 + +enum pd_pdo_type { + PDO_TYPE_FIXED = 0, + PDO_TYPE_BATT = 1, + PDO_TYPE_VAR = 2, +}; + +#define PDO_TYPE_SHIFT 30 +#define PDO_TYPE_MASK 0x3 + +#define PDO_TYPE(t) ((t) << PDO_TYPE_SHIFT) + +#define PDO_VOLT_MASK 0x3ff +#define PDO_CURR_MASK 0x3ff +#define PDO_PWR_MASK 0x3ff + +#define PDO_FIXED_DUAL_ROLE BIT(29) /* Power role swap supported */ +#define PDO_FIXED_SUSPEND BIT(28) /* USB Suspend supported (Source) */ +#define PDO_FIXED_HIGHER_CAP BIT(28) /* Requires more than vSafe5V (Sink) */ +#define PDO_FIXED_EXTPOWER BIT(27) /* Externally powered */ +#define PDO_FIXED_USB_COMM BIT(26) /* USB communications capable */ +#define PDO_FIXED_DATA_SWAP BIT(25) /* Data role swap supported */ +#define PDO_FIXED_VOLT_SHIFT 10 /* 50mV units */ +#define PDO_FIXED_CURR_SHIFT 0 /* 10mA units */ + +#define PDO_FIXED_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_FIXED_VOLT_SHIFT) +#define PDO_FIXED_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_FIXED_CURR_SHIFT) + +#define PDO_FIXED(mv, ma, flags) \ + (PDO_TYPE(PDO_TYPE_FIXED) | (flags) | \ + PDO_FIXED_VOLT(mv) | PDO_FIXED_CURR(ma)) + +#define PDO_BATT_MAX_VOLT_SHIFT 20 /* 50mV units */ +#define PDO_BATT_MIN_VOLT_SHIFT 10 /* 50mV units */ +#define PDO_BATT_MAX_PWR_SHIFT 0 /* 250mW units */ + +#define PDO_BATT_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MIN_VOLT_SHIFT) +#define PDO_BATT_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_BATT_MAX_VOLT_SHIFT) +#define PDO_BATT_MAX_POWER(mw) ((((mw) / 250) & PDO_PWR_MASK) << PDO_BATT_MAX_PWR_SHIFT) + +#define PDO_BATT(min_mv, max_mv, max_mw) \ + (PDO_TYPE(PDO_TYPE_BATT) | PDO_BATT_MIN_VOLT(min_mv) | \ + PDO_BATT_MAX_VOLT(max_mv) | PDO_BATT_MAX_POWER(max_mw)) + +#define PDO_VAR_MAX_VOLT_SHIFT 20 /* 50mV units */ +#define PDO_VAR_MIN_VOLT_SHIFT 10 /* 50mV units */ +#define PDO_VAR_MAX_CURR_SHIFT 0 /* 10mA units */ + +#define PDO_VAR_MIN_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MIN_VOLT_SHIFT) +#define PDO_VAR_MAX_VOLT(mv) ((((mv) / 50) & PDO_VOLT_MASK) << PDO_VAR_MAX_VOLT_SHIFT) +#define PDO_VAR_MAX_CURR(ma) ((((ma) / 10) & PDO_CURR_MASK) << PDO_VAR_MAX_CURR_SHIFT) + +#define PDO_VAR(min_mv, max_mv, max_ma) \ + (PDO_TYPE(PDO_TYPE_VAR) | PDO_VAR_MIN_VOLT(min_mv) | \ + PDO_VAR_MAX_VOLT(max_mv) | PDO_VAR_MAX_CURR(max_ma)) + +static inline enum pd_pdo_type pdo_type(u32 pdo) +{ + return (pdo >> PDO_TYPE_SHIFT) & PDO_TYPE_MASK; +} + +static inline unsigned int pdo_fixed_voltage(u32 pdo) +{ + return ((pdo >> PDO_FIXED_VOLT_SHIFT) & PDO_VOLT_MASK) * 50; +} + +static inline unsigned int pdo_min_voltage(u32 pdo) +{ + return ((pdo >> PDO_VAR_MIN_VOLT_SHIFT) & PDO_VOLT_MASK) * 50; +} + +static inline unsigned int pdo_max_voltage(u32 pdo) +{ + return ((pdo >> PDO_VAR_MAX_VOLT_SHIFT) & PDO_VOLT_MASK) * 50; +} + +static inline unsigned int pdo_max_current(u32 pdo) +{ + return ((pdo >> PDO_VAR_MAX_CURR_SHIFT) & PDO_CURR_MASK) * 10; +} + +static inline unsigned int pdo_max_power(u32 pdo) +{ + return ((pdo >> PDO_BATT_MAX_PWR_SHIFT) & PDO_PWR_MASK) * 250; +} + +/* RDO: Request Data Object */ +#define RDO_OBJ_POS_SHIFT 28 +#define RDO_OBJ_POS_MASK 0x7 +#define RDO_GIVE_BACK BIT(27) /* Supports reduced operating current */ +#define RDO_CAP_MISMATCH BIT(26) /* Not satisfied by source caps */ +#define RDO_USB_COMM BIT(25) /* USB communications capable */ +#define RDO_NO_SUSPEND BIT(24) /* USB Suspend not supported */ + +#define RDO_PWR_MASK 0x3ff +#define RDO_CURR_MASK 0x3ff + +#define RDO_FIXED_OP_CURR_SHIFT 10 +#define RDO_FIXED_MAX_CURR_SHIFT 0 + +#define RDO_OBJ(idx) (((idx) & RDO_OBJ_POS_MASK) << RDO_OBJ_POS_SHIFT) + +#define PDO_FIXED_OP_CURR(ma) ((((ma) / 10) & RDO_CURR_MASK) << RDO_FIXED_OP_CURR_SHIFT) +#define PDO_FIXED_MAX_CURR(ma) ((((ma) / 10) & RDO_CURR_MASK) << RDO_FIXED_MAX_CURR_SHIFT) + +#define RDO_FIXED(idx, op_ma, max_ma, flags) \ + (RDO_OBJ(idx) | (flags) | \ + PDO_FIXED_OP_CURR(op_ma) | PDO_FIXED_MAX_CURR(max_ma)) + +#define RDO_BATT_OP_PWR_SHIFT 10 /* 250mW units */ +#define RDO_BATT_MAX_PWR_SHIFT 0 /* 250mW units */ + +#define RDO_BATT_OP_PWR(mw) ((((mw) / 250) & RDO_PWR_MASK) << RDO_BATT_OP_PWR_SHIFT) +#define RDO_BATT_MAX_PWR(mw) ((((mw) / 250) & RDO_PWR_MASK) << RDO_BATT_MAX_PWR_SHIFT) + +#define RDO_BATT(idx, op_mw, max_mw, flags) \ + (RDO_OBJ(idx) | (flags) | \ + RDO_BATT_OP_PWR(op_mw) | RDO_BATT_MAX_PWR(max_mw)) + +static inline unsigned int rdo_index(u32 rdo) +{ + return (rdo >> RDO_OBJ_POS_SHIFT) & RDO_OBJ_POS_MASK; +} + +static inline unsigned int rdo_op_current(u32 rdo) +{ + return ((rdo >> RDO_FIXED_OP_CURR_SHIFT) & RDO_CURR_MASK) * 10; +} + +static inline unsigned int rdo_max_current(u32 rdo) +{ + return ((rdo >> RDO_FIXED_MAX_CURR_SHIFT) & + RDO_CURR_MASK) * 10; +} + +static inline unsigned int rdo_op_power(u32 rdo) +{ + return ((rdo >> RDO_BATT_OP_PWR_SHIFT) & RDO_PWR_MASK) * 250; +} + +static inline unsigned int rdo_max_power(u32 rdo) +{ + return ((rdo >> RDO_BATT_MAX_PWR_SHIFT) & RDO_PWR_MASK) * 250; +} + +/* USB PD timers and counters */ +#define PD_T_NO_RESPONSE 5000 /* 4.5 - 5.5 seconds */ +#define PD_T_DB_DETECT 10000 /* 10 - 15 seconds */ +#define PD_T_SEND_SOURCE_CAP 150 /* 100 - 200 ms */ +#define PD_T_SENDER_RESPONSE 60 /* 24 - 30 ms, relaxed */ +#define PD_T_SOURCE_ACTIVITY 45 +#define PD_T_SINK_ACTIVITY 135 +#define PD_T_SINK_WAIT_CAP 240 +#define PD_T_PS_TRANSITION 500 +#define PD_T_SRC_TRANSITION 35 +#define PD_T_DRP_SNK 40 +#define PD_T_DRP_SRC 30 +#define PD_T_PS_SOURCE_OFF 920 +#define PD_T_PS_SOURCE_ON 480 +#define PD_T_PS_HARD_RESET 30 +#define PD_T_SRC_RECOVER 760 +#define PD_T_SRC_RECOVER_MAX 1000 +#define PD_T_SRC_TURN_ON 275 +#define PD_T_SAFE_0V 650 +#define PD_T_VCONN_SOURCE_ON 100 +#define PD_T_SINK_REQUEST 100 /* 100 ms minimum */ +#define PD_T_ERROR_RECOVERY 100 /* minimum 25 is insufficient */ +#define PD_T_SRCSWAPSTDBY 625 /* Maximum of 650ms */ +#define PD_T_NEWSRC 250 /* Maximum of 275ms */ + +#define PD_T_DRP_TRY 100 /* 75 - 150 ms */ +#define PD_T_DRP_TRYWAIT 600 /* 400 - 800 ms */ + +#define PD_T_CC_DEBOUNCE 200 /* 100 - 200 ms */ +#define PD_T_PD_DEBOUNCE 20 /* 10 - 20 ms */ + +#define PD_N_CAPS_COUNT (PD_T_NO_RESPONSE / PD_T_SEND_SOURCE_CAP) +#define PD_N_HARD_RESET_COUNT 2 + +#endif /* __LINUX_USB_PD_H */ diff --git a/include/linux/usb/pd_bdo.h b/include/linux/usb/pd_bdo.h new file mode 100644 index 000000000000..90b94d9fea5d --- /dev/null +++ b/include/linux/usb/pd_bdo.h @@ -0,0 +1,31 @@ +/* + * Copyright 2015-2017 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_USB_PD_BDO_H +#define __LINUX_USB_PD_BDO_H + +/* BDO : BIST Data Object */ +#define BDO_MODE_RECV (0 << 28) +#define BDO_MODE_TRANSMIT (1 << 28) +#define BDO_MODE_COUNTERS (2 << 28) +#define BDO_MODE_CARRIER0 (3 << 28) +#define BDO_MODE_CARRIER1 (4 << 28) +#define BDO_MODE_CARRIER2 (5 << 28) +#define BDO_MODE_CARRIER3 (6 << 28) +#define BDO_MODE_EYE (7 << 28) +#define BDO_MODE_TESTDATA (8 << 28) + +#define BDO_MODE_MASK(mode) ((mode) & 0xf0000000) + +#endif diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h new file mode 100644 index 000000000000..d92259f8de0a --- /dev/null +++ b/include/linux/usb/pd_vdo.h @@ -0,0 +1,251 @@ +/* + * Copyright 2015-2017 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_USB_PD_VDO_H +#define __LINUX_USB_PD_VDO_H + +#include "pd.h" + +/* + * VDO : Vendor Defined Message Object + * VDM object is minimum of VDM header + 6 additional data objects. + */ + +#define VDO_MAX_OBJECTS 6 +#define VDO_MAX_SIZE (VDO_MAX_OBJECTS + 1) + +/* + * VDM header + * ---------- + * <31:16> :: SVID + * <15> :: VDM type ( 1b == structured, 0b == unstructured ) + * <14:13> :: Structured VDM version (can only be 00 == 1.0 currently) + * <12:11> :: reserved + * <10:8> :: object position (1-7 valid ... used for enter/exit mode only) + * <7:6> :: command type (SVDM only?) + * <5> :: reserved (SVDM), command type (UVDM) + * <4:0> :: command + */ +#define VDO(vid, type, custom) \ + (((vid) << 16) | \ + ((type) << 15) | \ + ((custom) & 0x7FFF)) + +#define VDO_SVDM_TYPE (1 << 15) +#define VDO_SVDM_VERS(x) ((x) << 13) +#define VDO_OPOS(x) ((x) << 8) +#define VDO_CMDT(x) ((x) << 6) +#define VDO_OPOS_MASK VDO_OPOS(0x7) +#define VDO_CMDT_MASK VDO_CMDT(0x3) + +#define CMDT_INIT 0 +#define CMDT_RSP_ACK 1 +#define CMDT_RSP_NAK 2 +#define CMDT_RSP_BUSY 3 + +/* reserved for SVDM ... for Google UVDM */ +#define VDO_SRC_INITIATOR (0 << 5) +#define VDO_SRC_RESPONDER (1 << 5) + +#define CMD_DISCOVER_IDENT 1 +#define CMD_DISCOVER_SVID 2 +#define CMD_DISCOVER_MODES 3 +#define CMD_ENTER_MODE 4 +#define CMD_EXIT_MODE 5 +#define CMD_ATTENTION 6 + +#define VDO_CMD_VENDOR(x) (((10 + (x)) & 0x1f)) + +/* ChromeOS specific commands */ +#define VDO_CMD_VERSION VDO_CMD_VENDOR(0) +#define VDO_CMD_SEND_INFO VDO_CMD_VENDOR(1) +#define VDO_CMD_READ_INFO VDO_CMD_VENDOR(2) +#define VDO_CMD_REBOOT VDO_CMD_VENDOR(5) +#define VDO_CMD_FLASH_ERASE VDO_CMD_VENDOR(6) +#define VDO_CMD_FLASH_WRITE VDO_CMD_VENDOR(7) +#define VDO_CMD_ERASE_SIG VDO_CMD_VENDOR(8) +#define VDO_CMD_PING_ENABLE VDO_CMD_VENDOR(10) +#define VDO_CMD_CURRENT VDO_CMD_VENDOR(11) +#define VDO_CMD_FLIP VDO_CMD_VENDOR(12) +#define VDO_CMD_GET_LOG VDO_CMD_VENDOR(13) +#define VDO_CMD_CCD_EN VDO_CMD_VENDOR(14) + +#define PD_VDO_VID(vdo) ((vdo) >> 16) +#define PD_VDO_SVDM(vdo) (((vdo) >> 15) & 1) +#define PD_VDO_OPOS(vdo) (((vdo) >> 8) & 0x7) +#define PD_VDO_CMD(vdo) ((vdo) & 0x1f) +#define PD_VDO_CMDT(vdo) (((vdo) >> 6) & 0x3) + +/* + * SVDM Identity request -> response + * + * Request is simply properly formatted SVDM header + * + * Response is 4 data objects: + * [0] :: SVDM header + * [1] :: Identitiy header + * [2] :: Cert Stat VDO + * [3] :: (Product | Cable) VDO + * [4] :: AMA VDO + * + */ +#define VDO_INDEX_HDR 0 +#define VDO_INDEX_IDH 1 +#define VDO_INDEX_CSTAT 2 +#define VDO_INDEX_CABLE 3 +#define VDO_INDEX_PRODUCT 3 +#define VDO_INDEX_AMA 4 + +/* + * SVDM Identity Header + * -------------------- + * <31> :: data capable as a USB host + * <30> :: data capable as a USB device + * <29:27> :: product type + * <26> :: modal operation supported (1b == yes) + * <25:16> :: Reserved, Shall be set to zero + * <15:0> :: USB-IF assigned VID for this cable vendor + */ +#define IDH_PTYPE_UNDEF 0 +#define IDH_PTYPE_HUB 1 +#define IDH_PTYPE_PERIPH 2 +#define IDH_PTYPE_PCABLE 3 +#define IDH_PTYPE_ACABLE 4 +#define IDH_PTYPE_AMA 5 + +#define VDO_IDH(usbh, usbd, ptype, is_modal, vid) \ + ((usbh) << 31 | (usbd) << 30 | ((ptype) & 0x7) << 27 \ + | (is_modal) << 26 | ((vid) & 0xffff)) + +#define PD_IDH_PTYPE(vdo) (((vdo) >> 27) & 0x7) +#define PD_IDH_VID(vdo) ((vdo) & 0xffff) +#define PD_IDH_MODAL_SUPP(vdo) ((vdo) & (1 << 26)) + +/* + * Cert Stat VDO + * ------------- + * <31:0> : USB-IF assigned XID for this cable + */ +#define PD_CSTAT_XID(vdo) (vdo) + +/* + * Product VDO + * ----------- + * <31:16> : USB Product ID + * <15:0> : USB bcdDevice + */ +#define VDO_PRODUCT(pid, bcd) (((pid) & 0xffff) << 16 | ((bcd) & 0xffff)) +#define PD_PRODUCT_PID(vdo) (((vdo) >> 16) & 0xffff) + +/* + * Cable VDO + * --------- + * <31:28> :: Cable HW version + * <27:24> :: Cable FW version + * <23:20> :: Reserved, Shall be set to zero + * <19:18> :: type-C to Type-A/B/C (00b == A, 01 == B, 10 == C) + * <17> :: Type-C to Plug/Receptacle (0b == plug, 1b == receptacle) + * <16:13> :: cable latency (0001 == <10ns(~1m length)) + * <12:11> :: cable termination type (11b == both ends active VCONN req) + * <10> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable) + * <9> :: SSTX2 Directionality support + * <8> :: SSRX1 Directionality support + * <7> :: SSRX2 Directionality support + * <6:5> :: Vbus current handling capability + * <4> :: Vbus through cable (0b == no, 1b == yes) + * <3> :: SOP" controller present? (0b == no, 1b == yes) + * <2:0> :: USB SS Signaling support + */ +#define CABLE_ATYPE 0 +#define CABLE_BTYPE 1 +#define CABLE_CTYPE 2 +#define CABLE_PLUG 0 +#define CABLE_RECEPTACLE 1 +#define CABLE_CURR_1A5 0 +#define CABLE_CURR_3A 1 +#define CABLE_CURR_5A 2 +#define CABLE_USBSS_U2_ONLY 0 +#define CABLE_USBSS_U31_GEN1 1 +#define CABLE_USBSS_U31_GEN2 2 +#define VDO_CABLE(hw, fw, cbl, gdr, lat, term, tx1d, tx2d, rx1d, rx2d, cur,\ + vps, sopp, usbss) \ + (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18 \ + | (gdr) << 17 | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 \ + | (tx1d) << 10 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 \ + | ((cur) & 0x3) << 5 | (vps) << 4 | (sopp) << 3 \ + | ((usbss) & 0x7)) + +/* + * AMA VDO + * --------- + * <31:28> :: Cable HW version + * <27:24> :: Cable FW version + * <23:12> :: Reserved, Shall be set to zero + * <11> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable) + * <10> :: SSTX2 Directionality support + * <9> :: SSRX1 Directionality support + * <8> :: SSRX2 Directionality support + * <7:5> :: Vconn power + * <4> :: Vconn power required + * <3> :: Vbus power required + * <2:0> :: USB SS Signaling support + */ +#define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \ + (((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 \ + | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8 \ + | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3 \ + | ((usbss) & 0x7)) + +#define PD_VDO_AMA_VCONN_REQ(vdo) (((vdo) >> 4) & 1) +#define PD_VDO_AMA_VBUS_REQ(vdo) (((vdo) >> 3) & 1) + +#define AMA_VCONN_PWR_1W 0 +#define AMA_VCONN_PWR_1W5 1 +#define AMA_VCONN_PWR_2W 2 +#define AMA_VCONN_PWR_3W 3 +#define AMA_VCONN_PWR_4W 4 +#define AMA_VCONN_PWR_5W 5 +#define AMA_VCONN_PWR_6W 6 +#define AMA_USBSS_U2_ONLY 0 +#define AMA_USBSS_U31_GEN1 1 +#define AMA_USBSS_U31_GEN2 2 +#define AMA_USBSS_BBONLY 3 + +/* + * SVDM Discover SVIDs request -> response + * + * Request is properly formatted VDM Header with discover SVIDs command. + * Response is a set of SVIDs of all all supported SVIDs with all zero's to + * mark the end of SVIDs. If more than 12 SVIDs are supported command SHOULD be + * repeated. + */ +#define VDO_SVID(svid0, svid1) (((svid0) & 0xffff) << 16 | ((svid1) & 0xffff)) +#define PD_VDO_SVID_SVID0(vdo) ((vdo) >> 16) +#define PD_VDO_SVID_SVID1(vdo) ((vdo) & 0xffff) + +/* USB-IF SIDs */ +#define USB_SID_PD 0xff00 /* power delivery */ +#define USB_SID_DISPLAYPORT 0xff01 +#define USB_SID_MHL 0xff02 /* Mobile High-Definition Link */ + +/* VDM command timeouts (in ms) */ + +#define PD_T_VDM_UNSTRUCTURED 500 +#define PD_T_VDM_BUSY 100 +#define PD_T_VDM_WAIT_MODE_E 100 +#define PD_T_VDM_SNDR_RSP 30 +#define PD_T_VDM_E_MODE 25 +#define PD_T_VDM_RCVR_RSP 15 + +#endif /* __LINUX_USB_PD_VDO_H */ diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h new file mode 100644 index 000000000000..073197f0d2bb --- /dev/null +++ b/include/linux/usb/tcpm.h @@ -0,0 +1,204 @@ +/* + * Copyright 2015-2017 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_USB_TCPM_H +#define __LINUX_USB_TCPM_H + +#include <linux/bitops.h> +#include <linux/usb/typec.h> +#include "pd.h" + +enum typec_cc_status { + TYPEC_CC_OPEN, + TYPEC_CC_RA, + TYPEC_CC_RD, + TYPEC_CC_RP_DEF, + TYPEC_CC_RP_1_5, + TYPEC_CC_RP_3_0, +}; + +enum typec_cc_polarity { + TYPEC_POLARITY_CC1, + TYPEC_POLARITY_CC2, +}; + +/* Time to wait for TCPC to complete transmit */ +#define PD_T_TCPC_TX_TIMEOUT 100 /* in ms */ +#define PD_ROLE_SWAP_TIMEOUT (MSEC_PER_SEC * 10) + +enum tcpm_transmit_status { + TCPC_TX_SUCCESS = 0, + TCPC_TX_DISCARDED = 1, + TCPC_TX_FAILED = 2, +}; + +enum tcpm_transmit_type { + TCPC_TX_SOP = 0, + TCPC_TX_SOP_PRIME = 1, + TCPC_TX_SOP_PRIME_PRIME = 2, + TCPC_TX_SOP_DEBUG_PRIME = 3, + TCPC_TX_SOP_DEBUG_PRIME_PRIME = 4, + TCPC_TX_HARD_RESET = 5, + TCPC_TX_CABLE_RESET = 6, + TCPC_TX_BIST_MODE_2 = 7 +}; + +/** + * struct tcpc_config - Port configuration + * @src_pdo: PDO parameters sent to port partner as response to + * PD_CTRL_GET_SOURCE_CAP message + * @nr_src_pdo: Number of entries in @src_pdo + * @snk_pdo: PDO parameters sent to partner as response to + * PD_CTRL_GET_SINK_CAP message + * @nr_snk_pdo: Number of entries in @snk_pdo + * @max_snk_mv: Maximum acceptable sink voltage in mV + * @max_snk_ma: Maximum sink current in mA + * @max_snk_mw: Maximum required sink power in mW + * @operating_snk_mw: + * Required operating sink power in mW + * @type: Port type (TYPEC_PORT_DFP, TYPEC_PORT_UFP, or + * TYPEC_PORT_DRP) + * @default_role: + * Default port role (TYPEC_SINK or TYPEC_SOURCE). + * Set to TYPEC_NO_PREFERRED_ROLE if no default role. + * @try_role_hw:True if try.{Src,Snk} is implemented in hardware + * @alt_modes: List of supported alternate modes + */ +struct tcpc_config { + const u32 *src_pdo; + unsigned int nr_src_pdo; + + const u32 *snk_pdo; + unsigned int nr_snk_pdo; + + const u32 *snk_vdo; + unsigned int nr_snk_vdo; + + unsigned int max_snk_mv; + unsigned int max_snk_ma; + unsigned int max_snk_mw; + unsigned int operating_snk_mw; + + enum typec_port_type type; + enum typec_role default_role; + bool try_role_hw; /* try.{src,snk} implemented in hardware */ + + const struct typec_altmode_desc *alt_modes; +}; + +enum tcpc_usb_switch { + TCPC_USB_SWITCH_CONNECT, + TCPC_USB_SWITCH_DISCONNECT, +}; + +/* Mux state attributes */ +#define TCPC_MUX_USB_ENABLED BIT(0) /* USB enabled */ +#define TCPC_MUX_DP_ENABLED BIT(1) /* DP enabled */ +#define TCPC_MUX_POLARITY_INVERTED BIT(2) /* Polarity inverted */ + +/* Mux modes, decoded to attributes */ +enum tcpc_mux_mode { + TYPEC_MUX_NONE = 0, /* Open switch */ + TYPEC_MUX_USB = TCPC_MUX_USB_ENABLED, /* USB only */ + TYPEC_MUX_DP = TCPC_MUX_DP_ENABLED, /* DP only */ + TYPEC_MUX_DOCK = TCPC_MUX_USB_ENABLED | /* Both USB and DP */ + TCPC_MUX_DP_ENABLED, +}; + +struct tcpc_mux_dev { + int (*set)(struct tcpc_mux_dev *dev, enum tcpc_mux_mode mux_mode, + enum tcpc_usb_switch usb_config, + enum typec_cc_polarity polarity); + bool dfp_only; + void *priv_data; +}; + +/** + * struct tcpc_dev - Port configuration and callback functions + * @config: Pointer to port configuration + * @get_vbus: Called to read current VBUS state + * @get_current_limit: + * Optional; called by the tcpm core when configured as a snk + * and cc=Rp-def. This allows the tcpm to provide a fallback + * current-limit detection method for the cc=Rp-def case. + * For example, some tcpcs may include BC1.2 charger detection + * and use that in this case. + * @set_cc: Called to set value of CC pins + * @get_cc: Called to read current CC pin values + * @set_polarity: + * Called to set polarity + * @set_vconn: Called to enable or disable VCONN + * @set_vbus: Called to enable or disable VBUS + * @set_current_limit: + * Optional; called to set current limit as negotiated + * with partner. + * @set_pd_rx: Called to enable or disable reception of PD messages + * @set_roles: Called to set power and data roles + * @start_drp_toggling: + * Optional; if supported by hardware, called to start DRP + * toggling. DRP toggling is stopped automatically if + * a connection is established. + * @try_role: Optional; called to set a preferred role + * @pd_transmit:Called to transmit PD message + * @mux: Pointer to multiplexer data + */ +struct tcpc_dev { + const struct tcpc_config *config; + + int (*init)(struct tcpc_dev *dev); + int (*get_vbus)(struct tcpc_dev *dev); + int (*get_current_limit)(struct tcpc_dev *dev); + int (*set_cc)(struct tcpc_dev *dev, enum typec_cc_status cc); + int (*get_cc)(struct tcpc_dev *dev, enum typec_cc_status *cc1, + enum typec_cc_status *cc2); + int (*set_polarity)(struct tcpc_dev *dev, + enum typec_cc_polarity polarity); + int (*set_vconn)(struct tcpc_dev *dev, bool on); + int (*set_vbus)(struct tcpc_dev *dev, bool on, bool charge); + int (*set_current_limit)(struct tcpc_dev *dev, u32 max_ma, u32 mv); + int (*set_pd_rx)(struct tcpc_dev *dev, bool on); + int (*set_roles)(struct tcpc_dev *dev, bool attached, + enum typec_role role, enum typec_data_role data); + int (*start_drp_toggling)(struct tcpc_dev *dev, + enum typec_cc_status cc); + int (*try_role)(struct tcpc_dev *dev, int role); + int (*pd_transmit)(struct tcpc_dev *dev, enum tcpm_transmit_type type, + const struct pd_message *msg); + struct tcpc_mux_dev *mux; +}; + +struct tcpm_port; + +struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc); +void tcpm_unregister_port(struct tcpm_port *port); + +void tcpm_update_source_capabilities(struct tcpm_port *port, const u32 *pdo, + unsigned int nr_pdo); +void tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo, + unsigned int nr_pdo, + unsigned int max_snk_mv, + unsigned int max_snk_ma, + unsigned int max_snk_mw, + unsigned int operating_snk_mw); + +void tcpm_vbus_change(struct tcpm_port *port); +void tcpm_cc_change(struct tcpm_port *port); +void tcpm_pd_receive(struct tcpm_port *port, + const struct pd_message *msg); +void tcpm_pd_transmit_complete(struct tcpm_port *port, + enum tcpm_transmit_status status); +void tcpm_pd_hard_reset(struct tcpm_port *port); +void tcpm_tcpc_reset(struct tcpm_port *port); + +#endif /* __LINUX_USB_TCPM_H */ |