diff options
Diffstat (limited to 'include/linux')
34 files changed, 713 insertions, 170 deletions
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 0ddb5c02ad8b..6a0a89ed7f81 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -33,12 +33,14 @@ #define UART01x_DR 0x00 /* Data read or written from the interface. */ #define UART01x_RSR 0x04 /* Receive status register (Read). */ #define UART01x_ECR 0x04 /* Error clear register (Write). */ +#define ZX_UART01x_DR 0x04 /* Data read or written from the interface. */ #define UART010_LCRH 0x08 /* Line control register, high byte. */ #define ST_UART011_DMAWM 0x08 /* DMA watermark configure register. */ #define UART010_LCRM 0x0C /* Line control register, middle byte. */ #define ST_UART011_TIMEOUT 0x0C /* Timeout period register. */ #define UART010_LCRL 0x10 /* Line control register, low byte. */ #define UART010_CR 0x14 /* Control register. */ +#define ZX_UART01x_FR 0x14 /* Flag register (Read only). */ #define UART01x_FR 0x18 /* Flag register (Read only). */ #define UART010_IIR 0x1C /* Interrupt identification register (Read). */ #define UART010_ICR 0x1C /* Interrupt clear register (Write). */ @@ -49,13 +51,21 @@ #define UART011_LCRH 0x2c /* Line control register. */ #define ST_UART011_LCRH_TX 0x2c /* Tx Line control register. */ #define UART011_CR 0x30 /* Control register. */ +#define ZX_UART011_LCRH_TX 0x30 /* Tx Line control register. */ #define UART011_IFLS 0x34 /* Interrupt fifo level select. */ +#define ZX_UART011_CR 0x34 /* Control register. */ +#define ZX_UART011_IFLS 0x38 /* Interrupt fifo level select. */ #define UART011_IMSC 0x38 /* Interrupt mask. */ #define UART011_RIS 0x3c /* Raw interrupt status. */ #define UART011_MIS 0x40 /* Masked interrupt status. */ +#define ZX_UART011_IMSC 0x40 /* Interrupt mask. */ #define UART011_ICR 0x44 /* Interrupt clear register. */ +#define ZX_UART011_RIS 0x44 /* Raw interrupt status. */ #define UART011_DMACR 0x48 /* DMA control register. */ +#define ZX_UART011_MIS 0x48 /* Masked interrupt status. */ +#define ZX_UART011_ICR 0x4c /* Interrupt clear register. */ #define ST_UART011_XFCR 0x50 /* XON/XOFF control register. */ +#define ZX_UART011_DMACR 0x50 /* DMA control register. */ #define ST_UART011_XON1 0x54 /* XON1 register. */ #define ST_UART011_XON2 0x58 /* XON2 register. */ #define ST_UART011_XOFF1 0x5C /* XON1 register. */ @@ -75,15 +85,19 @@ #define UART01x_RSR_PE 0x02 #define UART01x_RSR_FE 0x01 +#define ZX_UART01x_FR_BUSY 0x300 #define UART011_FR_RI 0x100 #define UART011_FR_TXFE 0x080 #define UART011_FR_RXFF 0x040 #define UART01x_FR_TXFF 0x020 #define UART01x_FR_RXFE 0x010 #define UART01x_FR_BUSY 0x008 +#define ZX_UART01x_FR_DSR 0x008 #define UART01x_FR_DCD 0x004 #define UART01x_FR_DSR 0x002 +#define ZX_UART01x_FR_CTS 0x002 #define UART01x_FR_CTS 0x001 +#define ZX_UART011_FR_RI 0x001 #define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY) #define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */ diff --git a/include/linux/atmel_serial.h b/include/linux/atmel_serial.h index 00beddf6be20..ee696d7e8a43 100644 --- a/include/linux/atmel_serial.h +++ b/include/linux/atmel_serial.h @@ -16,115 +16,151 @@ #ifndef ATMEL_SERIAL_H #define ATMEL_SERIAL_H -#define ATMEL_US_CR 0x00 /* Control Register */ -#define ATMEL_US_RSTRX (1 << 2) /* Reset Receiver */ -#define ATMEL_US_RSTTX (1 << 3) /* Reset Transmitter */ -#define ATMEL_US_RXEN (1 << 4) /* Receiver Enable */ -#define ATMEL_US_RXDIS (1 << 5) /* Receiver Disable */ -#define ATMEL_US_TXEN (1 << 6) /* Transmitter Enable */ -#define ATMEL_US_TXDIS (1 << 7) /* Transmitter Disable */ -#define ATMEL_US_RSTSTA (1 << 8) /* Reset Status Bits */ -#define ATMEL_US_STTBRK (1 << 9) /* Start Break */ -#define ATMEL_US_STPBRK (1 << 10) /* Stop Break */ -#define ATMEL_US_STTTO (1 << 11) /* Start Time-out */ -#define ATMEL_US_SENDA (1 << 12) /* Send Address */ -#define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */ -#define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */ -#define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */ -#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */ -#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */ -#define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */ -#define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */ +#define ATMEL_US_CR 0x00 /* Control Register */ +#define ATMEL_US_RSTRX BIT(2) /* Reset Receiver */ +#define ATMEL_US_RSTTX BIT(3) /* Reset Transmitter */ +#define ATMEL_US_RXEN BIT(4) /* Receiver Enable */ +#define ATMEL_US_RXDIS BIT(5) /* Receiver Disable */ +#define ATMEL_US_TXEN BIT(6) /* Transmitter Enable */ +#define ATMEL_US_TXDIS BIT(7) /* Transmitter Disable */ +#define ATMEL_US_RSTSTA BIT(8) /* Reset Status Bits */ +#define ATMEL_US_STTBRK BIT(9) /* Start Break */ +#define ATMEL_US_STPBRK BIT(10) /* Stop Break */ +#define ATMEL_US_STTTO BIT(11) /* Start Time-out */ +#define ATMEL_US_SENDA BIT(12) /* Send Address */ +#define ATMEL_US_RSTIT BIT(13) /* Reset Iterations */ +#define ATMEL_US_RSTNACK BIT(14) /* Reset Non Acknowledge */ +#define ATMEL_US_RETTO BIT(15) /* Rearm Time-out */ +#define ATMEL_US_DTREN BIT(16) /* Data Terminal Ready Enable */ +#define ATMEL_US_DTRDIS BIT(17) /* Data Terminal Ready Disable */ +#define ATMEL_US_RTSEN BIT(18) /* Request To Send Enable */ +#define ATMEL_US_RTSDIS BIT(19) /* Request To Send Disable */ +#define ATMEL_US_TXFCLR BIT(24) /* Transmit FIFO Clear */ +#define ATMEL_US_RXFCLR BIT(25) /* Receive FIFO Clear */ +#define ATMEL_US_TXFLCLR BIT(26) /* Transmit FIFO Lock Clear */ +#define ATMEL_US_FIFOEN BIT(30) /* FIFO enable */ +#define ATMEL_US_FIFODIS BIT(31) /* FIFO disable */ -#define ATMEL_US_MR 0x04 /* Mode Register */ -#define ATMEL_US_USMODE (0xf << 0) /* Mode of the USART */ -#define ATMEL_US_USMODE_NORMAL 0 -#define ATMEL_US_USMODE_RS485 1 -#define ATMEL_US_USMODE_HWHS 2 -#define ATMEL_US_USMODE_MODEM 3 -#define ATMEL_US_USMODE_ISO7816_T0 4 -#define ATMEL_US_USMODE_ISO7816_T1 6 -#define ATMEL_US_USMODE_IRDA 8 -#define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */ -#define ATMEL_US_USCLKS_MCK (0 << 4) -#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) -#define ATMEL_US_USCLKS_SCK (3 << 4) -#define ATMEL_US_CHRL (3 << 6) /* Character Length */ -#define ATMEL_US_CHRL_5 (0 << 6) -#define ATMEL_US_CHRL_6 (1 << 6) -#define ATMEL_US_CHRL_7 (2 << 6) -#define ATMEL_US_CHRL_8 (3 << 6) -#define ATMEL_US_SYNC (1 << 8) /* Synchronous Mode Select */ -#define ATMEL_US_PAR (7 << 9) /* Parity Type */ -#define ATMEL_US_PAR_EVEN (0 << 9) -#define ATMEL_US_PAR_ODD (1 << 9) -#define ATMEL_US_PAR_SPACE (2 << 9) -#define ATMEL_US_PAR_MARK (3 << 9) -#define ATMEL_US_PAR_NONE (4 << 9) -#define ATMEL_US_PAR_MULTI_DROP (6 << 9) -#define ATMEL_US_NBSTOP (3 << 12) /* Number of Stop Bits */ -#define ATMEL_US_NBSTOP_1 (0 << 12) -#define ATMEL_US_NBSTOP_1_5 (1 << 12) -#define ATMEL_US_NBSTOP_2 (2 << 12) -#define ATMEL_US_CHMODE (3 << 14) /* Channel Mode */ -#define ATMEL_US_CHMODE_NORMAL (0 << 14) -#define ATMEL_US_CHMODE_ECHO (1 << 14) -#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) -#define ATMEL_US_CHMODE_REM_LOOP (3 << 14) -#define ATMEL_US_MSBF (1 << 16) /* Bit Order */ -#define ATMEL_US_MODE9 (1 << 17) /* 9-bit Character Length */ -#define ATMEL_US_CLKO (1 << 18) /* Clock Output Select */ -#define ATMEL_US_OVER (1 << 19) /* Oversampling Mode */ -#define ATMEL_US_INACK (1 << 20) /* Inhibit Non Acknowledge */ -#define ATMEL_US_DSNACK (1 << 21) /* Disable Successive NACK */ -#define ATMEL_US_MAX_ITER (7 << 24) /* Max Iterations */ -#define ATMEL_US_FILTER (1 << 28) /* Infrared Receive Line Filter */ +#define ATMEL_US_MR 0x04 /* Mode Register */ +#define ATMEL_US_USMODE GENMASK(3, 0) /* Mode of the USART */ +#define ATMEL_US_USMODE_NORMAL 0 +#define ATMEL_US_USMODE_RS485 1 +#define ATMEL_US_USMODE_HWHS 2 +#define ATMEL_US_USMODE_MODEM 3 +#define ATMEL_US_USMODE_ISO7816_T0 4 +#define ATMEL_US_USMODE_ISO7816_T1 6 +#define ATMEL_US_USMODE_IRDA 8 +#define ATMEL_US_USCLKS GENMASK(5, 4) /* Clock Selection */ +#define ATMEL_US_USCLKS_MCK (0 << 4) +#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) +#define ATMEL_US_USCLKS_SCK (3 << 4) +#define ATMEL_US_CHRL GENMASK(7, 6) /* Character Length */ +#define ATMEL_US_CHRL_5 (0 << 6) +#define ATMEL_US_CHRL_6 (1 << 6) +#define ATMEL_US_CHRL_7 (2 << 6) +#define ATMEL_US_CHRL_8 (3 << 6) +#define ATMEL_US_SYNC BIT(8) /* Synchronous Mode Select */ +#define ATMEL_US_PAR GENMASK(11, 9) /* Parity Type */ +#define ATMEL_US_PAR_EVEN (0 << 9) +#define ATMEL_US_PAR_ODD (1 << 9) +#define ATMEL_US_PAR_SPACE (2 << 9) +#define ATMEL_US_PAR_MARK (3 << 9) +#define ATMEL_US_PAR_NONE (4 << 9) +#define ATMEL_US_PAR_MULTI_DROP (6 << 9) +#define ATMEL_US_NBSTOP GENMASK(13, 12) /* Number of Stop Bits */ +#define ATMEL_US_NBSTOP_1 (0 << 12) +#define ATMEL_US_NBSTOP_1_5 (1 << 12) +#define ATMEL_US_NBSTOP_2 (2 << 12) +#define ATMEL_US_CHMODE GENMASK(15, 14) /* Channel Mode */ +#define ATMEL_US_CHMODE_NORMAL (0 << 14) +#define ATMEL_US_CHMODE_ECHO (1 << 14) +#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) +#define ATMEL_US_CHMODE_REM_LOOP (3 << 14) +#define ATMEL_US_MSBF BIT(16) /* Bit Order */ +#define ATMEL_US_MODE9 BIT(17) /* 9-bit Character Length */ +#define ATMEL_US_CLKO BIT(18) /* Clock Output Select */ +#define ATMEL_US_OVER BIT(19) /* Oversampling Mode */ +#define ATMEL_US_INACK BIT(20) /* Inhibit Non Acknowledge */ +#define ATMEL_US_DSNACK BIT(21) /* Disable Successive NACK */ +#define ATMEL_US_MAX_ITER GENMASK(26, 24) /* Max Iterations */ +#define ATMEL_US_FILTER BIT(28) /* Infrared Receive Line Filter */ -#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ -#define ATMEL_US_RXRDY (1 << 0) /* Receiver Ready */ -#define ATMEL_US_TXRDY (1 << 1) /* Transmitter Ready */ -#define ATMEL_US_RXBRK (1 << 2) /* Break Received / End of Break */ -#define ATMEL_US_ENDRX (1 << 3) /* End of Receiver Transfer */ -#define ATMEL_US_ENDTX (1 << 4) /* End of Transmitter Transfer */ -#define ATMEL_US_OVRE (1 << 5) /* Overrun Error */ -#define ATMEL_US_FRAME (1 << 6) /* Framing Error */ -#define ATMEL_US_PARE (1 << 7) /* Parity Error */ -#define ATMEL_US_TIMEOUT (1 << 8) /* Receiver Time-out */ -#define ATMEL_US_TXEMPTY (1 << 9) /* Transmitter Empty */ -#define ATMEL_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */ -#define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */ -#define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */ -#define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */ -#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */ -#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */ -#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */ -#define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */ -#define ATMEL_US_RI (1 << 20) /* RI */ -#define ATMEL_US_DSR (1 << 21) /* DSR */ -#define ATMEL_US_DCD (1 << 22) /* DCD */ -#define ATMEL_US_CTS (1 << 23) /* CTS */ +#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ +#define ATMEL_US_RXRDY BIT(0) /* Receiver Ready */ +#define ATMEL_US_TXRDY BIT(1) /* Transmitter Ready */ +#define ATMEL_US_RXBRK BIT(2) /* Break Received / End of Break */ +#define ATMEL_US_ENDRX BIT(3) /* End of Receiver Transfer */ +#define ATMEL_US_ENDTX BIT(4) /* End of Transmitter Transfer */ +#define ATMEL_US_OVRE BIT(5) /* Overrun Error */ +#define ATMEL_US_FRAME BIT(6) /* Framing Error */ +#define ATMEL_US_PARE BIT(7) /* Parity Error */ +#define ATMEL_US_TIMEOUT BIT(8) /* Receiver Time-out */ +#define ATMEL_US_TXEMPTY BIT(9) /* Transmitter Empty */ +#define ATMEL_US_ITERATION BIT(10) /* Max number of Repetitions Reached */ +#define ATMEL_US_TXBUFE BIT(11) /* Transmission Buffer Empty */ +#define ATMEL_US_RXBUFF BIT(12) /* Reception Buffer Full */ +#define ATMEL_US_NACK BIT(13) /* Non Acknowledge */ +#define ATMEL_US_RIIC BIT(16) /* Ring Indicator Input Change */ +#define ATMEL_US_DSRIC BIT(17) /* Data Set Ready Input Change */ +#define ATMEL_US_DCDIC BIT(18) /* Data Carrier Detect Input Change */ +#define ATMEL_US_CTSIC BIT(19) /* Clear to Send Input Change */ +#define ATMEL_US_RI BIT(20) /* RI */ +#define ATMEL_US_DSR BIT(21) /* DSR */ +#define ATMEL_US_DCD BIT(22) /* DCD */ +#define ATMEL_US_CTS BIT(23) /* CTS */ -#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */ -#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */ -#define ATMEL_US_CSR 0x14 /* Channel Status Register */ -#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ -#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ -#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */ +#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */ +#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */ +#define ATMEL_US_CSR 0x14 /* Channel Status Register */ +#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ +#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ +#define ATMEL_US_SYNH BIT(15) /* Transmit/Receive Sync */ -#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ -#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */ +#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ +#define ATMEL_US_CD GENMASK(15, 0) /* Clock Divider */ -#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */ -#define ATMEL_US_TO (0xffff << 0) /* Time-out Value */ +#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */ +#define ATMEL_US_TO GENMASK(15, 0) /* Time-out Value */ -#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */ -#define ATMEL_US_TG (0xff << 0) /* Timeguard Value */ +#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */ +#define ATMEL_US_TG GENMASK(7, 0) /* Timeguard Value */ -#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */ -#define ATMEL_US_NER 0x44 /* Number of Errors Register */ -#define ATMEL_US_IF 0x4c /* IrDA Filter Register */ +#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */ +#define ATMEL_US_NER 0x44 /* Number of Errors Register */ +#define ATMEL_US_IF 0x4c /* IrDA Filter Register */ -#define ATMEL_US_NAME 0xf0 /* Ip Name */ -#define ATMEL_US_VERSION 0xfc /* Ip Version */ +#define ATMEL_US_CMPR 0x90 /* Comparaison Register */ +#define ATMEL_US_FMR 0xa0 /* FIFO Mode Register */ +#define ATMEL_US_TXRDYM(data) (((data) & 0x3) << 0) /* TX Ready Mode */ +#define ATMEL_US_RXRDYM(data) (((data) & 0x3) << 4) /* RX Ready Mode */ +#define ATMEL_US_ONE_DATA 0x0 +#define ATMEL_US_TWO_DATA 0x1 +#define ATMEL_US_FOUR_DATA 0x2 +#define ATMEL_US_FRTSC BIT(7) /* FIFO RTS pin Control */ +#define ATMEL_US_TXFTHRES(thr) (((thr) & 0x3f) << 8) /* TX FIFO Threshold */ +#define ATMEL_US_RXFTHRES(thr) (((thr) & 0x3f) << 16) /* RX FIFO Threshold */ +#define ATMEL_US_RXFTHRES2(thr) (((thr) & 0x3f) << 24) /* RX FIFO Threshold2 */ + +#define ATMEL_US_FLR 0xa4 /* FIFO Level Register */ +#define ATMEL_US_TXFL(reg) (((reg) >> 0) & 0x3f) /* TX FIFO Level */ +#define ATMEL_US_RXFL(reg) (((reg) >> 16) & 0x3f) /* RX FIFO Level */ + +#define ATMEL_US_FIER 0xa8 /* FIFO Interrupt Enable Register */ +#define ATMEL_US_FIDR 0xac /* FIFO Interrupt Disable Register */ +#define ATMEL_US_FIMR 0xb0 /* FIFO Interrupt Mask Register */ +#define ATMEL_US_FESR 0xb4 /* FIFO Event Status Register */ +#define ATMEL_US_TXFEF BIT(0) /* Transmit FIFO Empty Flag */ +#define ATMEL_US_TXFFF BIT(1) /* Transmit FIFO Full Flag */ +#define ATMEL_US_TXFTHF BIT(2) /* Transmit FIFO Threshold Flag */ +#define ATMEL_US_RXFEF BIT(3) /* Receive FIFO Empty Flag */ +#define ATMEL_US_RXFFF BIT(4) /* Receive FIFO Full Flag */ +#define ATMEL_US_RXFTHF BIT(5) /* Receive FIFO Threshold Flag */ +#define ATMEL_US_TXFPTEF BIT(6) /* Transmit FIFO Pointer Error Flag */ +#define ATMEL_US_RXFPTEF BIT(7) /* Receive FIFO Pointer Error Flag */ +#define ATMEL_US_TXFLOCK BIT(8) /* Transmit FIFO Lock (FESR only) */ +#define ATMEL_US_RXFTHF2 BIT(9) /* Receive FIFO Threshold Flag 2 */ + +#define ATMEL_US_NAME 0xf0 /* Ip Name */ +#define ATMEL_US_VERSION 0xfc /* Ip Version */ #endif diff --git a/include/linux/coresight.h b/include/linux/coresight.h index 3486b9082adb..c69e1b932809 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -14,6 +14,7 @@ #define _LINUX_CORESIGHT_H #include <linux/device.h> +#include <linux/sched.h> /* Peripheral id registers (0xFD0-0xFEC) */ #define CORESIGHT_PERIPHIDR4 0xfd0 @@ -248,4 +249,24 @@ static inline struct coresight_platform_data *of_get_coresight_platform_data( struct device *dev, struct device_node *node) { return NULL; } #endif +#ifdef CONFIG_PID_NS +static inline unsigned long +coresight_vpid_to_pid(unsigned long vpid) +{ + struct task_struct *task = NULL; + unsigned long pid = 0; + + rcu_read_lock(); + task = find_task_by_vpid(vpid); + if (task) + pid = task_pid_nr(task); + rcu_read_unlock(); + + return pid; +} +#else +static inline unsigned long +coresight_vpid_to_pid(unsigned long vpid) { return vpid; } +#endif + #endif diff --git a/include/linux/cpufeature.h b/include/linux/cpufeature.h index c4d4eb8ac9fe..986c06c88d81 100644 --- a/include/linux/cpufeature.h +++ b/include/linux/cpufeature.h @@ -11,6 +11,7 @@ #ifdef CONFIG_GENERIC_CPU_AUTOPROBE +#include <linux/init.h> #include <linux/mod_devicetable.h> #include <asm/cpufeature.h> @@ -43,16 +44,16 @@ * For a list of legal values for 'feature', please consult the file * 'asm/cpufeature.h' of your favorite architecture. */ -#define module_cpu_feature_match(x, __init) \ +#define module_cpu_feature_match(x, __initfunc) \ static struct cpu_feature const cpu_feature_match_ ## x[] = \ { { .feature = cpu_feature(x) }, { } }; \ MODULE_DEVICE_TABLE(cpu, cpu_feature_match_ ## x); \ \ -static int cpu_feature_match_ ## x ## _init(void) \ +static int __init cpu_feature_match_ ## x ## _init(void) \ { \ if (!cpu_have_feature(cpu_feature(x))) \ return -ENODEV; \ - return __init(); \ + return __initfunc(); \ } \ module_init(cpu_feature_match_ ## x ## _init) diff --git a/include/linux/device.h b/include/linux/device.h index a2b4ea70a946..1225f98e9240 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -341,7 +341,7 @@ struct subsys_interface { struct bus_type *subsys; struct list_head node; int (*add_dev)(struct device *dev, struct subsys_interface *sif); - int (*remove_dev)(struct device *dev, struct subsys_interface *sif); + void (*remove_dev)(struct device *dev, struct subsys_interface *sif); }; int subsys_interface_register(struct subsys_interface *sif); diff --git a/include/linux/extcon.h b/include/linux/extcon.h index b16d929fa75f..c0f8c4fc5d45 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -27,8 +27,6 @@ #define __LINUX_EXTCON_H__ #include <linux/device.h> -#include <linux/notifier.h> -#include <linux/sysfs.h> /* * Define the unique id of supported external connectors @@ -77,8 +75,6 @@ struct extcon_cable; * be attached simulataneously. {0x7, 0} is equivalent to * {0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there * can be no simultaneous connections. - * @print_state: An optional callback to override the method to print the - * status of the extcon device. * @dev: Device of this extcon. * @state: Attach/detach state of this extcon. Do not provide at * register-time. @@ -102,9 +98,6 @@ struct extcon_dev { const unsigned int *supported_cable; const u32 *mutually_exclusive; - /* Optional callbacks to override class functions */ - ssize_t (*print_state)(struct extcon_dev *edev, char *buf); - /* Internal data. Please do not set. */ struct device dev; struct raw_notifier_head *nh; diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 2a2f56b292c1..f2912914141a 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -20,11 +20,6 @@ #define FSL_UTMI_PHY_DLY 10 /*As per P1010RM, delay for UTMI PHY CLK to become stable - 10ms*/ #define FSL_USB_PHY_CLK_TIMEOUT 10000 /* uSec */ -#define FSL_USB_VER_OLD 0 -#define FSL_USB_VER_1_6 1 -#define FSL_USB_VER_2_2 2 -#define FSL_USB_VER_2_4 3 -#define FSL_USB_VER_2_5 4 #include <linux/types.h> @@ -52,6 +47,15 @@ * */ +enum fsl_usb2_controller_ver { + FSL_USB_VER_NONE = -1, + FSL_USB_VER_OLD = 0, + FSL_USB_VER_1_6 = 1, + FSL_USB_VER_2_2 = 2, + FSL_USB_VER_2_4 = 3, + FSL_USB_VER_2_5 = 4, +}; + enum fsl_usb2_operating_modes { FSL_USB2_MPH_HOST, FSL_USB2_DR_HOST, @@ -65,6 +69,7 @@ enum fsl_usb2_phy_modes { FSL_USB2_PHY_UTMI, FSL_USB2_PHY_UTMI_WIDE, FSL_USB2_PHY_SERIAL, + FSL_USB2_PHY_UTMI_DUAL, }; struct clk; @@ -72,7 +77,7 @@ struct platform_device; struct fsl_usb2_platform_data { /* board specific information */ - int controller_ver; + enum fsl_usb2_controller_ver controller_ver; enum fsl_usb2_operating_modes operating_mode; enum fsl_usb2_phy_modes phy_mode; unsigned int port_enables; @@ -93,6 +98,9 @@ struct fsl_usb2_platform_data { unsigned suspended:1; unsigned already_suspended:1; + unsigned has_fsl_erratum_a007792:1; + unsigned has_fsl_erratum_a005275:1; + unsigned check_phy_clk_valid:1; /* register save area for suspend/resume */ u32 pm_command; diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 30d3a1f79450..54733d5b503e 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -977,6 +977,11 @@ int __must_check __vmbus_driver_register(struct hv_driver *hv_driver, const char *mod_name); void vmbus_driver_unregister(struct hv_driver *hv_driver); +int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, + resource_size_t min, resource_size_t max, + resource_size_t size, resource_size_t align, + bool fb_overlap_ok); + /** * VMBUS_DEVICE - macro used to describe a specific hyperv vmbus device * @@ -1233,8 +1238,6 @@ extern bool vmbus_prep_negotiate_resp(struct icmsg_hdr *, void hv_process_channel_removal(struct vmbus_channel *channel, u32 relid); -extern struct resource hyperv_mmio; - /* * Negotiated version with the Host. */ diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index 2c476acb87d9..3c17cd7fdf06 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -166,6 +166,7 @@ struct st_sensor_transfer_function { /** * struct st_sensor_settings - ST specific sensor settings * @wai: Contents of WhoAmI register. + * @wai_addr: The address of WhoAmI register. * @sensors_supported: List of supported sensors by struct itself. * @ch: IIO channels for the sensor. * @odr: Output data rate register and ODR list available. @@ -179,6 +180,7 @@ struct st_sensor_transfer_function { */ struct st_sensor_settings { u8 wai; + u8 wai_addr; char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME]; struct iio_chan_spec *ch; int num_ch; diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index 26fb8f6342bb..fad58671c49e 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -100,7 +100,7 @@ void iio_channel_stop_all_cb(struct iio_cb_buffer *cb_buff); /** * iio_channel_cb_get_channels() - get access to the underlying channels. - * @cb_buff: The callback buffer from whom we want the channel + * @cb_buffer: The callback buffer from whom we want the channel * information. * * This function allows one to obtain information about the channels. diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index f79148261d16..7bb7f673cb3f 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -645,6 +645,15 @@ int iio_str_to_fixpoint(const char *str, int fract_mult, int *integer, #define IIO_DEGREE_TO_RAD(deg) (((deg) * 314159ULL + 9000000ULL) / 18000000ULL) /** + * IIO_RAD_TO_DEGREE() - Convert rad to degree + * @rad: A value in rad + * + * Returns the given value converted from rad to degree + */ +#define IIO_RAD_TO_DEGREE(rad) \ + (((rad) * 18000000ULL + 314159ULL / 2) / 314159ULL) + +/** * IIO_G_TO_M_S_2() - Convert g to meter / second**2 * @g: A value in g * @@ -652,4 +661,12 @@ int iio_str_to_fixpoint(const char *str, int fract_mult, int *integer, */ #define IIO_G_TO_M_S_2(g) ((g) * 980665ULL / 100000ULL) +/** + * IIO_M_S_2_TO_G() - Convert meter / second**2 to g + * @ms2: A value in meter / second**2 + * + * Returns the given value converted from meter / second**2 to g + */ +#define IIO_M_S_2_TO_G(ms2) (((ms2) * 100000ULL + 980665ULL / 2) / 980665ULL) + #endif /* _INDUSTRIAL_IO_H_ */ diff --git a/include/linux/iio/sysfs.h b/include/linux/iio/sysfs.h index 8a1d18640ab9..9cd8f747212f 100644 --- a/include/linux/iio/sysfs.h +++ b/include/linux/iio/sysfs.h @@ -18,7 +18,8 @@ struct iio_chan_spec; * struct iio_dev_attr - iio specific device attribute * @dev_attr: underlying device attribute * @address: associated register address - * @l: list head for maintaining list of dynamically created attrs. + * @l: list head for maintaining list of dynamically created attrs + * @c: specification for the underlying channel */ struct iio_dev_attr { struct device_attribute dev_attr; diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h index fa76c79a52a1..1c9e028e0d4a 100644 --- a/include/linux/iio/trigger.h +++ b/include/linux/iio/trigger.h @@ -18,6 +18,9 @@ struct iio_subirq { bool enabled; }; +struct iio_dev; +struct iio_trigger; + /** * struct iio_trigger_ops - operations structure for an iio_trigger. * @owner: used to monitor usage count of the trigger. diff --git a/include/linux/iio/triggered_buffer.h b/include/linux/iio/triggered_buffer.h index c378ebec605e..f72f70d5a97b 100644 --- a/include/linux/iio/triggered_buffer.h +++ b/include/linux/iio/triggered_buffer.h @@ -7,8 +7,8 @@ struct iio_dev; struct iio_buffer_setup_ops; int iio_triggered_buffer_setup(struct iio_dev *indio_dev, - irqreturn_t (*pollfunc_bh)(int irq, void *p), - irqreturn_t (*pollfunc_th)(int irq, void *p), + irqreturn_t (*h)(int irq, void *p), + irqreturn_t (*thread)(int irq, void *p), const struct iio_buffer_setup_ops *setup_ops); void iio_triggered_buffer_cleanup(struct iio_dev *indio_dev); diff --git a/include/linux/kexec.h b/include/linux/kexec.h index e804306ef5e8..b63218f68c4b 100644 --- a/include/linux/kexec.h +++ b/include/linux/kexec.h @@ -323,6 +323,7 @@ struct pt_regs; struct task_struct; static inline void crash_kexec(struct pt_regs *regs) { } static inline int kexec_should_crash(struct task_struct *p) { return 0; } +#define kexec_in_progress false #endif /* CONFIG_KEXEC */ #endif /* !defined(__ASSEBMLY__) */ diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 05e99b8ef465..81089cf1f0c1 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -139,6 +139,7 @@ static inline bool is_error_page(struct page *page) #define KVM_REQ_DISABLE_IBS 24 #define KVM_REQ_APIC_PAGE_RELOAD 25 #define KVM_REQ_SMI 26 +#define KVM_REQ_HV_CRASH 27 #define KVM_USERSPACE_IRQ_SOURCE_ID 0 #define KVM_IRQFD_RESAMPLE_IRQ_SOURCE_ID 1 @@ -363,9 +364,6 @@ struct kvm { struct kvm_memslots *memslots[KVM_ADDRESS_SPACE_NUM]; struct srcu_struct srcu; struct srcu_struct irq_srcu; -#ifdef CONFIG_KVM_APIC_ARCHITECTURE - u32 bsp_vcpu_id; -#endif struct kvm_vcpu *vcpus[KVM_MAX_VCPUS]; atomic_t online_vcpus; int last_boosted_vcpu; @@ -424,8 +422,15 @@ struct kvm { #define vcpu_unimpl(vcpu, fmt, ...) \ kvm_pr_unimpl("vcpu%i " fmt, (vcpu)->vcpu_id, ## __VA_ARGS__) +#define vcpu_debug(vcpu, fmt, ...) \ + kvm_debug("vcpu%i " fmt, (vcpu)->vcpu_id, ## __VA_ARGS__) + static inline struct kvm_vcpu *kvm_get_vcpu(struct kvm *kvm, int i) { + /* Pairs with smp_wmb() in kvm_vm_ioctl_create_vcpu, in case + * the caller has read kvm->online_vcpus before (as is the case + * for kvm_for_each_vcpu, for example). + */ smp_rmb(); return kvm->vcpus[i]; } @@ -1055,22 +1060,9 @@ static inline int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args) #endif /* CONFIG_HAVE_KVM_EVENTFD */ #ifdef CONFIG_KVM_APIC_ARCHITECTURE -static inline bool kvm_vcpu_is_reset_bsp(struct kvm_vcpu *vcpu) -{ - return vcpu->kvm->bsp_vcpu_id == vcpu->vcpu_id; -} - -static inline bool kvm_vcpu_is_bsp(struct kvm_vcpu *vcpu) -{ - return (vcpu->arch.apic_base & MSR_IA32_APICBASE_BSP) != 0; -} - bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu); - #else - static inline bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu) { return true; } - #endif static inline void kvm_make_request(int req, struct kvm_vcpu *vcpu) diff --git a/include/linux/mei_cl_bus.h b/include/linux/mei_cl_bus.h index a16b1f9c1aca..0962b2ca628a 100644 --- a/include/linux/mei_cl_bus.h +++ b/include/linux/mei_cl_bus.h @@ -6,6 +6,7 @@ #include <linux/mod_devicetable.h> struct mei_cl_device; +struct mei_device; typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *device, u32 events, void *context); @@ -17,6 +18,8 @@ typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *device, * Drivers for MEI devices will get an mei_cl_device pointer * when being probed and shall use it for doing ME bus I/O. * + * @bus_list: device on the bus list + * @bus: parent mei device * @dev: linux driver model device pointer * @me_cl: me client * @cl: mei client @@ -25,10 +28,16 @@ typedef void (*mei_cl_event_cb_t)(struct mei_cl_device *device, * @event_cb: Drivers register this callback to get asynchronous ME * events (e.g. Rx buffer pending) notifications. * @event_context: event callback run context + * @events_mask: Events bit mask requested by driver. * @events: Events bitmask sent to the driver. + * + * @do_match: wheather device can be matched with a driver + * @is_added: device is already scanned * @priv_data: client private data */ struct mei_cl_device { + struct list_head bus_list; + struct mei_device *bus; struct device dev; struct mei_me_client *me_cl; @@ -38,8 +47,12 @@ struct mei_cl_device { struct work_struct event_work; mei_cl_event_cb_t event_cb; void *event_context; + unsigned long events_mask; unsigned long events; + unsigned int do_match:1; + unsigned int is_added:1; + void *priv_data; }; @@ -65,10 +78,12 @@ ssize_t mei_cl_send(struct mei_cl_device *device, u8 *buf, size_t length); ssize_t mei_cl_recv(struct mei_cl_device *device, u8 *buf, size_t length); int mei_cl_register_event_cb(struct mei_cl_device *device, + unsigned long event_mask, mei_cl_event_cb_t read_cb, void *context); #define MEI_CL_EVENT_RX 0 #define MEI_CL_EVENT_TX 1 +#define MEI_CL_EVENT_NOTIF 2 void *mei_cl_get_drvdata(const struct mei_cl_device *device); void mei_cl_set_drvdata(struct mei_cl_device *device, void *data); diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h index bb270bd03eed..13e1d96935ed 100644 --- a/include/linux/mfd/palmas.h +++ b/include/linux/mfd/palmas.h @@ -21,6 +21,7 @@ #include <linux/regmap.h> #include <linux/regulator/driver.h> #include <linux/extcon.h> +#include <linux/of_gpio.h> #include <linux/usb/phy_companion.h> #define PALMAS_NUM_CLIENTS 3 @@ -551,10 +552,16 @@ struct palmas_usb { int vbus_otg_irq; int vbus_irq; + int gpio_id_irq; + struct gpio_desc *id_gpiod; + unsigned long sw_debounce_jiffies; + struct delayed_work wq_detectid; + enum palmas_usb_state linkstat; int wakeup; bool enable_vbus_detection; bool enable_id_detection; + bool enable_gpio_id_detection; }; #define comparator_to_palmas(x) container_of((x), struct palmas_usb, comparator) diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index 819077c32690..81f6e427ba6b 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -67,7 +67,7 @@ struct miscdevice { }; extern int misc_register(struct miscdevice *misc); -extern int misc_deregister(struct miscdevice *misc); +extern void misc_deregister(struct miscdevice *misc); #define MODULE_ALIAS_MISCDEV(minor) \ MODULE_ALIAS("char-major-" __stringify(MISC_MAJOR) \ diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h new file mode 100644 index 000000000000..9bb77d3ed6e0 --- /dev/null +++ b/include/linux/nvmem-consumer.h @@ -0,0 +1,157 @@ +/* + * nvmem framework consumer. + * + * Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + * Copyright (C) 2013 Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _LINUX_NVMEM_CONSUMER_H +#define _LINUX_NVMEM_CONSUMER_H + +struct device; +struct device_node; +/* consumer cookie */ +struct nvmem_cell; +struct nvmem_device; + +struct nvmem_cell_info { + const char *name; + unsigned int offset; + unsigned int bytes; + unsigned int bit_offset; + unsigned int nbits; +}; + +#if IS_ENABLED(CONFIG_NVMEM) + +/* Cell based interface */ +struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name); +struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name); +void nvmem_cell_put(struct nvmem_cell *cell); +void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); +void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len); +int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len); + +/* direct nvmem device read/write interface */ +struct nvmem_device *nvmem_device_get(struct device *dev, const char *name); +struct nvmem_device *devm_nvmem_device_get(struct device *dev, + const char *name); +void nvmem_device_put(struct nvmem_device *nvmem); +void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem); +int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); +ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); +int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); + +#else + +static inline struct nvmem_cell *nvmem_cell_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline void devm_nvmem_cell_put(struct device *dev, + struct nvmem_cell *cell) +{ + +} +static inline void nvmem_cell_put(struct nvmem_cell *cell) +{ +} + +static inline char *nvmem_cell_read(struct nvmem_cell *cell, size_t *len) +{ + return ERR_PTR(-ENOSYS); +} + +static inline int nvmem_cell_write(struct nvmem_cell *cell, + const char *buf, size_t len) +{ + return -ENOSYS; +} + +static inline struct nvmem_device *nvmem_device_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct nvmem_device *devm_nvmem_device_get(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline void nvmem_device_put(struct nvmem_device *nvmem) +{ +} + +static inline void devm_nvmem_device_put(struct device *dev, + struct nvmem_device *nvmem) +{ +} + +static inline ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, + void *buf) +{ + return -ENOSYS; +} + +static inline int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, + void *buf) +{ + return -ENOSYS; +} + +static inline int nvmem_device_read(struct nvmem_device *nvmem, + unsigned int offset, size_t bytes, + void *buf) +{ + return -ENOSYS; +} + +static inline int nvmem_device_write(struct nvmem_device *nvmem, + unsigned int offset, size_t bytes, + void *buf) +{ + return -ENOSYS; +} +#endif /* CONFIG_NVMEM */ + +#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF) +struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, + const char *name); +struct nvmem_device *of_nvmem_device_get(struct device_node *np, + const char *name); +#else +static inline struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct nvmem_device *of_nvmem_device_get(struct device_node *np, + const char *name) +{ + return ERR_PTR(-ENOSYS); +} +#endif /* CONFIG_NVMEM && CONFIG_OF */ + +#endif /* ifndef _LINUX_NVMEM_CONSUMER_H */ diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h new file mode 100644 index 000000000000..0b68caff1b3c --- /dev/null +++ b/include/linux/nvmem-provider.h @@ -0,0 +1,47 @@ +/* + * nvmem framework provider. + * + * Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + * Copyright (C) 2013 Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _LINUX_NVMEM_PROVIDER_H +#define _LINUX_NVMEM_PROVIDER_H + +struct nvmem_device; +struct nvmem_cell_info; + +struct nvmem_config { + struct device *dev; + const char *name; + int id; + struct module *owner; + const struct nvmem_cell_info *cells; + int ncells; + bool read_only; +}; + +#if IS_ENABLED(CONFIG_NVMEM) + +struct nvmem_device *nvmem_register(const struct nvmem_config *cfg); +int nvmem_unregister(struct nvmem_device *nvmem); + +#else + +static inline struct nvmem_device *nvmem_register(const struct nvmem_config *c) +{ + return ERR_PTR(-ENOSYS); +} + +static inline int nvmem_unregister(struct nvmem_device *nvmem) +{ + return -ENOSYS; +} + +#endif /* CONFIG_NVMEM */ + +#endif /* ifndef _LINUX_NVMEM_PROVIDER_H */ diff --git a/include/linux/pci.h b/include/linux/pci.h index 8a0321a8fb59..860c751810fc 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1202,6 +1202,7 @@ struct msix_entry { u16 entry; /* driver uses to specify entry, OS writes */ }; +void pci_msi_setup_pci_dev(struct pci_dev *dev); #ifdef CONFIG_PCI_MSI int pci_msi_vec_count(struct pci_dev *dev); diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index 4b452c6a2f7b..527a85c61924 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -46,18 +46,6 @@ struct at91_cf_data { #define AT91_IDE_SWAP_A0_A2 0x02 }; - /* USB Host */ -#define AT91_MAX_USBH_PORTS 3 -struct at91_usbh_data { - int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ - int overcurrent_pin[AT91_MAX_USBH_PORTS]; - u8 ports; /* number of ports on root hub */ - u8 overcurrent_supported; - u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; - u8 overcurrent_status[AT91_MAX_USBH_PORTS]; - u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; -}; - /* NAND / SmartMedia */ struct atmel_nand_data { int enable_pin; /* chip enable */ diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index ba82c07feb95..faa0e0370ce7 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -136,8 +136,6 @@ void serial8250_resume_port(int line); extern int early_serial_setup(struct uart_port *port); -extern unsigned int serial8250_early_in(struct uart_port *port, int offset); -extern void serial8250_early_out(struct uart_port *port, int offset, int value); extern int early_serial8250_setup(struct earlycon_device *device, const char *options); extern void serial8250_do_set_termios(struct uart_port *port, @@ -152,6 +150,11 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir); unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr); void serial8250_tx_chars(struct uart_8250_port *up); unsigned int serial8250_modem_status(struct uart_8250_port *up); +void serial8250_init_port(struct uart_8250_port *up); +void serial8250_set_defaults(struct uart_8250_port *up); +void serial8250_console_write(struct uart_8250_port *up, const char *s, + unsigned int count); +int serial8250_console_setup(struct uart_port *port, char *options, bool probe); extern void serial8250_set_isa_configurator(void (*v) (int port, struct uart_port *up, diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h index c78dcfeaf25f..d4217eff489f 100644 --- a/include/linux/ti_wilink_st.h +++ b/include/linux/ti_wilink_st.h @@ -86,7 +86,6 @@ struct st_proto_s { extern long st_register(struct st_proto_s *); extern long st_unregister(struct st_proto_s *); -extern struct ti_st_plat_data *dt_pdata; /* * header information used by st_core.c diff --git a/include/linux/tty.h b/include/linux/tty.h index ad6c8913aa3e..d072ded41678 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -709,4 +709,10 @@ static inline void proc_tty_register_driver(struct tty_driver *d) {} static inline void proc_tty_unregister_driver(struct tty_driver *d) {} #endif +#define tty_debug(tty, f, args...) \ + do { \ + printk(KERN_DEBUG "%s: %s: " f, __func__, \ + tty_name(tty), ##args); \ + } while (0) + #endif diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 92e337c18839..161052477f77 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -296,7 +296,7 @@ struct tty_operations { struct tty_driver { int magic; /* magic number for this structure */ struct kref kref; /* Reference management */ - struct cdev *cdevs; + struct cdev **cdevs; struct module *owner; const char *driver_name; const char *name; diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index ab94f78c4dd1..a41833cd184c 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -19,8 +19,11 @@ struct ci_hdrc_platform_data { enum usb_phy_interface phy_mode; unsigned long flags; #define CI_HDRC_REGS_SHARED BIT(0) +#define CI_HDRC_DISABLE_DEVICE_STREAMING BIT(1) #define CI_HDRC_SUPPORTS_RUNTIME_PM BIT(2) -#define CI_HDRC_DISABLE_STREAMING BIT(3) +#define CI_HDRC_DISABLE_HOST_STREAMING BIT(3) +#define CI_HDRC_DISABLE_STREAMING (CI_HDRC_DISABLE_DEVICE_STREAMING | \ + CI_HDRC_DISABLE_HOST_STREAMING) /* * Only set it when DCCPARAMS.DC==1 and DCCPARAMS.HC==1, * but otg is not supported (no register otgsc). @@ -29,12 +32,22 @@ struct ci_hdrc_platform_data { #define CI_HDRC_IMX28_WRITE_FIX BIT(5) #define CI_HDRC_FORCE_FULLSPEED BIT(6) #define CI_HDRC_TURN_VBUS_EARLY_ON BIT(7) +#define CI_HDRC_SET_NON_ZERO_TTHA BIT(8) +#define CI_HDRC_OVERRIDE_AHB_BURST BIT(9) +#define CI_HDRC_OVERRIDE_TX_BURST BIT(10) +#define CI_HDRC_OVERRIDE_RX_BURST BIT(11) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 void (*notify_event) (struct ci_hdrc *ci, unsigned event); struct regulator *reg_vbus; + struct usb_otg_caps ci_otg_caps; bool tpl_support; + /* interrupt threshold setting */ + u32 itc_setting; + u32 ahb_burst_config; + u32 tx_burst_size; + u32 rx_burst_size; }; /* Default offset of capability registers */ diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 2511469a9904..1074b8921a5d 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -228,6 +228,8 @@ struct usb_function { struct list_head list; DECLARE_BITMAP(endpoints, 32); const struct usb_function_instance *fi; + + unsigned int bind_deactivated:1; }; int usb_add_function(struct usb_configuration *, struct usb_function *); diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 4f3dfb7d0654..c14a69b36d27 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -141,10 +141,49 @@ struct usb_ep_ops { }; /** + * struct usb_ep_caps - endpoint capabilities description + * @type_control:Endpoint supports control type (reserved for ep0). + * @type_iso:Endpoint supports isochronous transfers. + * @type_bulk:Endpoint supports bulk transfers. + * @type_int:Endpoint supports interrupt transfers. + * @dir_in:Endpoint supports IN direction. + * @dir_out:Endpoint supports OUT direction. + */ +struct usb_ep_caps { + unsigned type_control:1; + unsigned type_iso:1; + unsigned type_bulk:1; + unsigned type_int:1; + unsigned dir_in:1; + unsigned dir_out:1; +}; + +#define USB_EP_CAPS_TYPE_CONTROL 0x01 +#define USB_EP_CAPS_TYPE_ISO 0x02 +#define USB_EP_CAPS_TYPE_BULK 0x04 +#define USB_EP_CAPS_TYPE_INT 0x08 +#define USB_EP_CAPS_TYPE_ALL \ + (USB_EP_CAPS_TYPE_ISO | USB_EP_CAPS_TYPE_BULK | USB_EP_CAPS_TYPE_INT) +#define USB_EP_CAPS_DIR_IN 0x01 +#define USB_EP_CAPS_DIR_OUT 0x02 +#define USB_EP_CAPS_DIR_ALL (USB_EP_CAPS_DIR_IN | USB_EP_CAPS_DIR_OUT) + +#define USB_EP_CAPS(_type, _dir) \ + { \ + .type_control = !!(_type & USB_EP_CAPS_TYPE_CONTROL), \ + .type_iso = !!(_type & USB_EP_CAPS_TYPE_ISO), \ + .type_bulk = !!(_type & USB_EP_CAPS_TYPE_BULK), \ + .type_int = !!(_type & USB_EP_CAPS_TYPE_INT), \ + .dir_in = !!(_dir & USB_EP_CAPS_DIR_IN), \ + .dir_out = !!(_dir & USB_EP_CAPS_DIR_OUT), \ + } + +/** * struct usb_ep - device side representation of USB endpoint * @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk" * @ops: Function pointers used to access hardware-specific operations. * @ep_list:the gadget's ep_list holds all of its endpoints + * @caps:The structure describing types and directions supported by endoint. * @maxpacket:The maximum packet size used on this endpoint. The initial * value can sometimes be reduced (hardware allowing), according to * the endpoint descriptor used to configure the endpoint. @@ -167,12 +206,15 @@ struct usb_ep_ops { * gadget->ep_list. the control endpoint (gadget->ep0) is not in that list, * and is accessed only in response to a driver setup() callback. */ + struct usb_ep { void *driver_data; const char *name; const struct usb_ep_ops *ops; struct list_head ep_list; + struct usb_ep_caps caps; + bool claimed; unsigned maxpacket:16; unsigned maxpacket_limit:16; unsigned max_streams:16; @@ -492,6 +534,9 @@ struct usb_gadget_ops { int (*udc_start)(struct usb_gadget *, struct usb_gadget_driver *); int (*udc_stop)(struct usb_gadget *); + struct usb_ep *(*match_ep)(struct usb_gadget *, + struct usb_endpoint_descriptor *, + struct usb_ss_ep_comp_descriptor *); }; /** @@ -511,6 +556,7 @@ struct usb_gadget_ops { * @dev: Driver model state for this abstract device. * @out_epnum: last used out ep number * @in_epnum: last used in ep number + * @otg_caps: OTG capabilities of this gadget. * @sg_supported: true if we can handle scatter-gather * @is_otg: True if the USB device port uses a Mini-AB jack, so that the * gadget driver must provide a USB OTG descriptor. @@ -526,6 +572,9 @@ struct usb_gadget_ops { * @quirk_ep_out_aligned_size: epout requires buffer size to be aligned to * MaxPacketSize. * @is_selfpowered: if the gadget is self-powered. + * @deactivated: True if gadget is deactivated - in deactivated state it cannot + * be connected. + * @connected: True if gadget is connected. * * Gadgets have a mostly-portable "gadget driver" implementing device * functions, handling all usb configurations and interfaces. Gadget @@ -559,6 +608,7 @@ struct usb_gadget { struct device dev; unsigned out_epnum; unsigned in_epnum; + struct usb_otg_caps *otg_caps; unsigned sg_supported:1; unsigned is_otg:1; @@ -567,7 +617,12 @@ struct usb_gadget { unsigned a_hnp_support:1; unsigned a_alt_hnp_support:1; unsigned quirk_ep_out_aligned_size:1; + unsigned quirk_altset_not_supp:1; + unsigned quirk_stall_not_supp:1; + unsigned quirk_zlp_not_supp:1; unsigned is_selfpowered:1; + unsigned deactivated:1; + unsigned connected:1; }; #define work_to_gadget(w) (container_of((w), struct usb_gadget, work)) @@ -584,7 +639,6 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev) #define gadget_for_each_ep(tmp, gadget) \ list_for_each_entry(tmp, &(gadget)->ep_list, ep_list) - /** * usb_ep_align_maybe - returns @len aligned to ep's maxpacketsize if gadget * requires quirk_ep_out_aligned_size, otherwise reguens len. @@ -603,6 +657,34 @@ usb_ep_align_maybe(struct usb_gadget *g, struct usb_ep *ep, size_t len) } /** + * gadget_is_altset_supported - return true iff the hardware supports + * altsettings + * @g: controller to check for quirk + */ +static inline int gadget_is_altset_supported(struct usb_gadget *g) +{ + return !g->quirk_altset_not_supp; +} + +/** + * gadget_is_stall_supported - return true iff the hardware supports stalling + * @g: controller to check for quirk + */ +static inline int gadget_is_stall_supported(struct usb_gadget *g) +{ + return !g->quirk_stall_not_supp; +} + +/** + * gadget_is_zlp_supported - return true iff the hardware supports zlp + * @g: controller to check for quirk + */ +static inline int gadget_is_zlp_supported(struct usb_gadget *g) +{ + return !g->quirk_zlp_not_supp; +} + +/** * gadget_is_dualspeed - return true iff the hardware handles high speed * @g: controller that might support both high and full speeds */ @@ -771,9 +853,24 @@ static inline int usb_gadget_vbus_disconnect(struct usb_gadget *gadget) */ static inline int usb_gadget_connect(struct usb_gadget *gadget) { + int ret; + if (!gadget->ops->pullup) return -EOPNOTSUPP; - return gadget->ops->pullup(gadget, 1); + + if (gadget->deactivated) { + /* + * If gadget is deactivated we only save new state. + * Gadget will be connected automatically after activation. + */ + gadget->connected = true; + return 0; + } + + ret = gadget->ops->pullup(gadget, 1); + if (!ret) + gadget->connected = 1; + return ret; } /** @@ -784,20 +881,88 @@ static inline int usb_gadget_connect(struct usb_gadget *gadget) * as a disconnect (when a VBUS session is active). Not all systems * support software pullup controls. * + * Returns zero on success, else negative errno. + */ +static inline int usb_gadget_disconnect(struct usb_gadget *gadget) +{ + int ret; + + if (!gadget->ops->pullup) + return -EOPNOTSUPP; + + if (gadget->deactivated) { + /* + * If gadget is deactivated we only save new state. + * Gadget will stay disconnected after activation. + */ + gadget->connected = false; + return 0; + } + + ret = gadget->ops->pullup(gadget, 0); + if (!ret) + gadget->connected = 0; + return ret; +} + +/** + * usb_gadget_deactivate - deactivate function which is not ready to work + * @gadget: the peripheral being deactivated + * * This routine may be used during the gadget driver bind() call to prevent * the peripheral from ever being visible to the USB host, unless later - * usb_gadget_connect() is called. For example, user mode components may + * usb_gadget_activate() is called. For example, user mode components may * need to be activated before the system can talk to hosts. * * Returns zero on success, else negative errno. */ -static inline int usb_gadget_disconnect(struct usb_gadget *gadget) +static inline int usb_gadget_deactivate(struct usb_gadget *gadget) { - if (!gadget->ops->pullup) - return -EOPNOTSUPP; - return gadget->ops->pullup(gadget, 0); + int ret; + + if (gadget->deactivated) + return 0; + + if (gadget->connected) { + ret = usb_gadget_disconnect(gadget); + if (ret) + return ret; + /* + * If gadget was being connected before deactivation, we want + * to reconnect it in usb_gadget_activate(). + */ + gadget->connected = true; + } + gadget->deactivated = true; + + return 0; } +/** + * usb_gadget_activate - activate function which is not ready to work + * @gadget: the peripheral being activated + * + * This routine activates gadget which was previously deactivated with + * usb_gadget_deactivate() call. It calls usb_gadget_connect() if needed. + * + * Returns zero on success, else negative errno. + */ +static inline int usb_gadget_activate(struct usb_gadget *gadget) +{ + if (!gadget->deactivated) + return 0; + + gadget->deactivated = false; + + /* + * If gadget has been connected before deactivation, or became connected + * while it was being deactivated, we call usb_gadget_connect(). + */ + if (gadget->connected) + return usb_gadget_connect(gadget); + + return 0; +} /*-------------------------------------------------------------------------*/ @@ -1002,6 +1167,10 @@ int usb_assign_descriptors(struct usb_function *f, struct usb_descriptor_header **ss); void usb_free_all_descriptors(struct usb_function *f); +struct usb_descriptor_header *usb_otg_descriptor_alloc( + struct usb_gadget *gadget); +int usb_otg_descriptor_init(struct usb_gadget *gadget, + struct usb_descriptor_header *otg_desc); /*-------------------------------------------------------------------------*/ /* utility to simplify map/unmap of usb_requests to/from DMA */ @@ -1034,6 +1203,21 @@ extern void usb_gadget_giveback_request(struct usb_ep *ep, /*-------------------------------------------------------------------------*/ +/* utility to find endpoint by name */ + +extern struct usb_ep *gadget_find_ep_by_name(struct usb_gadget *g, + const char *name); + +/*-------------------------------------------------------------------------*/ + +/* utility to check if endpoint caps match descriptor needs */ + +extern int usb_gadget_ep_match_desc(struct usb_gadget *gadget, + struct usb_ep *ep, struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *ep_comp); + +/*-------------------------------------------------------------------------*/ + /* utility to update vbus status for udc core, it may be scheduled */ extern void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status); diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index c9aa7792de10..d2784c10bfe2 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -564,9 +564,9 @@ extern void usb_ep0_reinit(struct usb_device *); /*-------------------------------------------------------------------------*/ -/* class requests from USB 3.0 hub spec, table 10-5 */ -#define SetHubDepth (0x3000 | HUB_SET_DEPTH) -#define GetPortErrorCount (0x8000 | HUB_GET_PORT_ERR_COUNT) +/* class requests from USB 3.1 hub spec, table 10-7 */ +#define SetHubDepth (0x2000 | HUB_SET_DEPTH) +#define GetPortErrorCount (0xa300 | HUB_GET_PORT_ERR_COUNT) /* * Generic bandwidth allocation constants/support diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index e55a1504266e..8c8f6854c993 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -128,7 +128,7 @@ struct msm_otg_platform_data { */ struct msm_usb_cable { struct notifier_block nb; - struct extcon_specific_cable_nb conn; + struct extcon_dev *extcon; }; /** @@ -155,6 +155,10 @@ struct msm_usb_cable { * starting controller using usbcmd run/stop bit. * @vbus: VBUS signal state trakining, using extcon framework * @id: ID signal state trakining, using extcon framework + * @switch_gpio: Descriptor for GPIO used to control external Dual + * SPDT USB Switch. + * @reboot: Used to inform the driver to route USB D+/D- line to Device + * connector */ struct msm_otg { struct usb_phy phy; @@ -188,6 +192,9 @@ struct msm_otg { struct msm_usb_cable vbus; struct msm_usb_cable id; + + struct gpio_desc *switch_gpio; + struct notifier_block reboot; }; #endif diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h index cfe0528cdbb1..8c5a818ec244 100644 --- a/include/linux/usb/of.h +++ b/include/linux/usb/of.h @@ -15,6 +15,8 @@ enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np); enum usb_device_speed of_usb_get_maximum_speed(struct device_node *np); bool of_usb_host_tpl_support(struct device_node *np); +int of_usb_update_otg_caps(struct device_node *np, + struct usb_otg_caps *otg_caps); #else static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np) { @@ -30,6 +32,11 @@ static inline bool of_usb_host_tpl_support(struct device_node *np) { return false; } +static inline int of_usb_update_otg_caps(struct device_node *np, + struct usb_otg_caps *otg_caps) +{ + return 0; +} #endif #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_USB_SUPPORT) diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 52661c5da690..bd1dcf816100 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -41,6 +41,21 @@ struct usb_otg { }; +/** + * struct usb_otg_caps - describes the otg capabilities of the device + * @otg_rev: The OTG revision number the device is compliant with, it's + * in binary-coded decimal (i.e. 2.0 is 0200H). + * @hnp_support: Indicates if the device supports HNP. + * @srp_support: Indicates if the device supports SRP. + * @adp_support: Indicates if the device supports ADP. + */ +struct usb_otg_caps { + u16 otg_rev; + bool hnp_support; + bool srp_support; + bool adp_support; +}; + extern const char *usb_otg_state_string(enum usb_otg_state state); /* Context: can sleep */ |