diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/ioport.h | 32 | ||||
| -rw-r--r-- | include/linux/pci-bwctrl.h | 28 | ||||
| -rw-r--r-- | include/linux/pci-pwrctrl.h (renamed from include/linux/pci-pwrctl.h) | 22 | ||||
| -rw-r--r-- | include/linux/pci-tph.h | 44 | ||||
| -rw-r--r-- | include/linux/pci.h | 66 | ||||
| -rw-r--r-- | include/uapi/linux/pci_regs.h | 38 |
6 files changed, 183 insertions, 47 deletions
diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 6e9fb667a1c5..5385349f0b8a 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -249,6 +249,38 @@ struct resource *lookup_resource(struct resource *root, resource_size_t start); int adjust_resource(struct resource *res, resource_size_t start, resource_size_t size); resource_size_t resource_alignment(struct resource *res); + +/** + * resource_set_size - Calculate resource end address from size and start + * @res: Resource descriptor + * @size: Size of the resource + * + * Calculate the end address for @res based on @size. + * + * Note: The start address of @res must be set when calling this function. + * Prefer resource_set_range() if setting both the start address and @size. + */ +static inline void resource_set_size(struct resource *res, resource_size_t size) +{ + res->end = res->start + size - 1; +} + +/** + * resource_set_range - Set resource start and end addresses + * @res: Resource descriptor + * @start: Start address for the resource + * @size: Size of the resource + * + * Set @res start address and calculate the end address based on @size. + */ +static inline void resource_set_range(struct resource *res, + resource_size_t start, + resource_size_t size) +{ + res->start = start; + resource_set_size(res, size); +} + static inline resource_size_t resource_size(const struct resource *res) { return res->end - res->start + 1; diff --git a/include/linux/pci-bwctrl.h b/include/linux/pci-bwctrl.h new file mode 100644 index 000000000000..cee07127455b --- /dev/null +++ b/include/linux/pci-bwctrl.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * PCIe bandwidth controller + * + * Copyright (C) 2023-2024 Intel Corporation + */ + +#ifndef LINUX_PCI_BWCTRL_H +#define LINUX_PCI_BWCTRL_H + +#include <linux/pci.h> + +struct thermal_cooling_device; + +#ifdef CONFIG_PCIE_THERMAL +struct thermal_cooling_device *pcie_cooling_device_register(struct pci_dev *port); +void pcie_cooling_device_unregister(struct thermal_cooling_device *cdev); +#else +static inline struct thermal_cooling_device *pcie_cooling_device_register(struct pci_dev *port) +{ + return NULL; +} +static inline void pcie_cooling_device_unregister(struct thermal_cooling_device *cdev) +{ +} +#endif + +#endif diff --git a/include/linux/pci-pwrctl.h b/include/linux/pci-pwrctrl.h index 0d23dddf59ec..7d439b0675e9 100644 --- a/include/linux/pci-pwrctl.h +++ b/include/linux/pci-pwrctrl.h @@ -3,8 +3,8 @@ * Copyright (C) 2024 Linaro Ltd. */ -#ifndef __PCI_PWRCTL_H__ -#define __PCI_PWRCTL_H__ +#ifndef __PCI_PWRCTRL_H__ +#define __PCI_PWRCTRL_H__ #include <linux/notifier.h> #include <linux/workqueue.h> @@ -29,14 +29,14 @@ struct device_link; */ /** - * struct pci_pwrctl - PCI device power control context. + * struct pci_pwrctrl - PCI device power control context. * @dev: Address of the power controlling device. * * An object of this type must be allocated by the PCI power control device and - * passed to the pwrctl subsystem to trigger a bus rescan and setup a device + * passed to the pwrctrl subsystem to trigger a bus rescan and setup a device * link with the device once it's up. */ -struct pci_pwrctl { +struct pci_pwrctrl { struct device *dev; /* Private: don't use. */ @@ -45,10 +45,10 @@ struct pci_pwrctl { struct work_struct work; }; -void pci_pwrctl_init(struct pci_pwrctl *pwrctl, struct device *dev); -int pci_pwrctl_device_set_ready(struct pci_pwrctl *pwrctl); -void pci_pwrctl_device_unset_ready(struct pci_pwrctl *pwrctl); -int devm_pci_pwrctl_device_set_ready(struct device *dev, - struct pci_pwrctl *pwrctl); +void pci_pwrctrl_init(struct pci_pwrctrl *pwrctrl, struct device *dev); +int pci_pwrctrl_device_set_ready(struct pci_pwrctrl *pwrctrl); +void pci_pwrctrl_device_unset_ready(struct pci_pwrctrl *pwrctrl); +int devm_pci_pwrctrl_device_set_ready(struct device *dev, + struct pci_pwrctrl *pwrctrl); -#endif /* __PCI_PWRCTL_H__ */ +#endif /* __PCI_PWRCTRL_H__ */ diff --git a/include/linux/pci-tph.h b/include/linux/pci-tph.h new file mode 100644 index 000000000000..c3e806c13d64 --- /dev/null +++ b/include/linux/pci-tph.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * TPH (TLP Processing Hints) + * + * Copyright (C) 2024 Advanced Micro Devices, Inc. + * Eric Van Tassell <Eric.VanTassell@amd.com> + * Wei Huang <wei.huang2@amd.com> + */ +#ifndef LINUX_PCI_TPH_H +#define LINUX_PCI_TPH_H + +/* + * According to the ECN for PCI Firmware Spec, Steering Tag can be different + * depending on the memory type: Volatile Memory or Persistent Memory. When a + * caller query about a target's Steering Tag, it must provide the target's + * tph_mem_type. ECN link: https://members.pcisig.com/wg/PCI-SIG/document/15470. + */ +enum tph_mem_type { + TPH_MEM_TYPE_VM, /* volatile memory */ + TPH_MEM_TYPE_PM /* persistent memory */ +}; + +#ifdef CONFIG_PCIE_TPH +int pcie_tph_set_st_entry(struct pci_dev *pdev, + unsigned int index, u16 tag); +int pcie_tph_get_cpu_st(struct pci_dev *dev, + enum tph_mem_type mem_type, + unsigned int cpu_uid, u16 *tag); +void pcie_disable_tph(struct pci_dev *pdev); +int pcie_enable_tph(struct pci_dev *pdev, int mode); +#else +static inline int pcie_tph_set_st_entry(struct pci_dev *pdev, + unsigned int index, u16 tag) +{ return -EINVAL; } +static inline int pcie_tph_get_cpu_st(struct pci_dev *dev, + enum tph_mem_type mem_type, + unsigned int cpu_uid, u16 *tag) +{ return -EINVAL; } +static inline void pcie_disable_tph(struct pci_dev *pdev) { } +static inline int pcie_enable_tph(struct pci_dev *pdev, int mode) +{ return -EINVAL; } +#endif + +#endif /* LINUX_PCI_TPH_H */ diff --git a/include/linux/pci.h b/include/linux/pci.h index 573b4c4c2be6..19147cb5bd9d 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -313,12 +313,20 @@ struct pci_vpd { }; struct irq_affinity; +struct pcie_bwctrl_data; struct pcie_link_state; struct pci_sriov; struct pci_p2pdma; struct rcec_ea; -/* The pci_dev structure describes PCI devices */ +/* struct pci_dev - describes a PCI device + * + * @supported_speeds: PCIe Supported Link Speeds Vector (+ reserved 0 at + * LSB). 0 when the supported speeds cannot be + * determined (e.g., for Root Complex Integrated + * Endpoints without the relevant Capability + * Registers). + */ struct pci_dev { struct list_head bus_list; /* Node in per-bus list */ struct pci_bus *bus; /* Bus this device is on */ @@ -434,6 +442,7 @@ struct pci_dev { unsigned int ats_enabled:1; /* Address Translation Svc */ unsigned int pasid_enabled:1; /* Process Address Space ID */ unsigned int pri_enabled:1; /* Page Request Interface */ + unsigned int tph_enabled:1; /* TLP Processing Hints */ unsigned int is_managed:1; /* Managed via devres */ unsigned int is_msi_managed:1; /* MSI release via devres installed */ unsigned int needs_freset:1; /* Requires fundamental reset */ @@ -495,6 +504,7 @@ struct pci_dev { unsigned int dpc_rp_extensions:1; u8 dpc_rp_log_size; #endif + struct pcie_bwctrl_data *link_bwctrl; #ifdef CONFIG_PCI_ATS union { struct pci_sriov *sriov; /* PF: SR-IOV info */ @@ -522,6 +532,7 @@ struct pci_dev { struct npem *npem; /* Native PCIe Enclosure Management */ #endif u16 acs_cap; /* ACS Capability offset */ + u8 supported_speeds; /* Supported Link Speeds Vector */ phys_addr_t rom; /* Physical address if not from BAR */ size_t romlen; /* Length if not from BAR */ /* @@ -534,6 +545,12 @@ struct pci_dev { /* These methods index pci_reset_fn_methods[] */ u8 reset_methods[PCI_NUM_RESET_METHODS]; /* In priority order */ + +#ifdef CONFIG_PCIE_TPH + u16 tph_cap; /* TPH capability offset */ + u8 tph_mode; /* TPH mode */ + u8 tph_req_type; /* TPH requester type */ +#endif }; static inline struct pci_dev *pci_physfn(struct pci_dev *dev) @@ -626,27 +643,6 @@ void pci_set_host_bridge_release(struct pci_host_bridge *bridge, int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge); -/* - * The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond - * to P2P or CardBus bridge windows) go in a table. Additional ones (for - * buses below host bridges or subtractive decode bridges) go in the list. - * Use pci_bus_for_each_resource() to iterate through all the resources. - */ - -/* - * PCI_SUBTRACTIVE_DECODE means the bridge forwards the window implicitly - * and there's no way to program the bridge with the details of the window. - * This does not apply to ACPI _CRS windows, even with the _DEC subtractive- - * decode bit set, because they are explicit and can be programmed with _SRS. - */ -#define PCI_SUBTRACTIVE_DECODE 0x1 - -struct pci_bus_resource { - struct list_head list; - struct resource *res; - unsigned int flags; -}; - #define PCI_REGION_FLAG_MASK 0x0fU /* These bits of resource flags tell us the PCI region flags */ struct pci_bus { @@ -1274,6 +1270,7 @@ static inline int pcie_capability_clear_and_set_word(struct pci_dev *dev, { switch (pos) { case PCI_EXP_LNKCTL: + case PCI_EXP_LNKCTL2: case PCI_EXP_RTCTL: return pcie_capability_clear_and_set_word_locked(dev, pos, clear, set); @@ -1498,8 +1495,7 @@ void pci_add_resource(struct list_head *resources, struct resource *res); void pci_add_resource_offset(struct list_head *resources, struct resource *res, resource_size_t offset); void pci_free_resource_list(struct list_head *resources); -void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, - unsigned int flags); +void pci_bus_add_resource(struct pci_bus *bus, struct resource *res); struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n); void pci_bus_remove_resources(struct pci_bus *bus); void pci_bus_remove_resource(struct pci_bus *bus, struct resource *res); @@ -1623,8 +1619,6 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata); -void pci_walk_bus_locked(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), - void *userdata); int pci_cfg_space_size(struct pci_dev *dev); unsigned char pci_bus_max_busnr(struct pci_bus *bus); void pci_setup_bridge(struct pci_bus *bus); @@ -1786,9 +1780,19 @@ static inline int pci_irqd_intx_xlate(struct irq_domain *d, #ifdef CONFIG_PCIEPORTBUS extern bool pcie_ports_disabled; extern bool pcie_ports_native; + +int pcie_set_target_speed(struct pci_dev *port, enum pci_bus_speed speed_req, + bool use_lt); #else #define pcie_ports_disabled true #define pcie_ports_native false + +static inline int pcie_set_target_speed(struct pci_dev *port, + enum pci_bus_speed speed_req, + bool use_lt) +{ + return -EOPNOTSUPP; +} #endif #define PCIE_LINK_STATE_L0S (BIT(0) | BIT(1)) /* Upstr/dwnstr L0s */ @@ -2293,15 +2297,15 @@ static inline void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) { } #endif +int pcim_request_all_regions(struct pci_dev *pdev, const char *name); void __iomem *pcim_iomap(struct pci_dev *pdev, int bar, unsigned long maxlen); void __iomem *pcim_iomap_region(struct pci_dev *pdev, int bar, const char *name); +void pcim_iounmap_region(struct pci_dev *pdev, int bar); void pcim_iounmap(struct pci_dev *pdev, void __iomem *addr); void __iomem * const *pcim_iomap_table(struct pci_dev *pdev); int pcim_request_region(struct pci_dev *pdev, int bar, const char *name); int pcim_iomap_regions(struct pci_dev *pdev, int mask, const char *name); -int pcim_iomap_regions_request_all(struct pci_dev *pdev, int mask, - const char *name); void pcim_iounmap_regions(struct pci_dev *pdev, int mask); void __iomem *pcim_iomap_range(struct pci_dev *pdev, int bar, unsigned long offset, unsigned long len); @@ -2609,6 +2613,12 @@ pci_host_bridge_acpi_msi_domain(struct pci_bus *bus) { return NULL; } static inline bool pci_pr3_present(struct pci_dev *pdev) { return false; } #endif +#if defined(CONFIG_X86) && defined(CONFIG_ACPI) +bool arch_pci_dev_is_removable(struct pci_dev *pdev); +#else +static inline bool arch_pci_dev_is_removable(struct pci_dev *pdev) { return false; } +#endif + #ifdef CONFIG_EEH static inline struct eeh_dev *pci_dev_to_eeh_dev(struct pci_dev *pdev) { diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 12323b3334a9..1601c7ed5fab 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -340,7 +340,8 @@ #define PCI_MSIX_ENTRY_UPPER_ADDR 0x4 /* Message Upper Address */ #define PCI_MSIX_ENTRY_DATA 0x8 /* Message Data */ #define PCI_MSIX_ENTRY_VECTOR_CTRL 0xc /* Vector Control */ -#define PCI_MSIX_ENTRY_CTRL_MASKBIT 0x00000001 +#define PCI_MSIX_ENTRY_CTRL_MASKBIT 0x00000001 /* Mask Bit */ +#define PCI_MSIX_ENTRY_CTRL_ST 0xffff0000 /* Steering Tag */ /* CompactPCI Hotswap Register */ @@ -659,6 +660,7 @@ #define PCI_EXP_DEVCAP2_ATOMIC_COMP64 0x00000100 /* 64b AtomicOp completion */ #define PCI_EXP_DEVCAP2_ATOMIC_COMP128 0x00000200 /* 128b AtomicOp completion */ #define PCI_EXP_DEVCAP2_LTR 0x00000800 /* Latency tolerance reporting */ +#define PCI_EXP_DEVCAP2_TPH_COMP_MASK 0x00003000 /* TPH completer support */ #define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */ #define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */ #define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */ @@ -678,6 +680,7 @@ #define PCI_EXP_DEVSTA2 0x2a /* Device Status 2 */ #define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V2 0x2c /* end of v2 EPs w/o link */ #define PCI_EXP_LNKCAP2 0x2c /* Link Capabilities 2 */ +#define PCI_EXP_LNKCAP2_SLS 0x000000fe /* Supported Link Speeds Vector */ #define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */ #define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5GT/s */ #define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8GT/s */ @@ -1023,15 +1026,34 @@ #define PCI_DPA_CAP_SUBSTATE_MASK 0x1F /* # substates - 1 */ #define PCI_DPA_BASE_SIZEOF 16 /* size with 0 substates */ +/* TPH Completer Support */ +#define PCI_EXP_DEVCAP2_TPH_COMP_NONE 0x0 /* None */ +#define PCI_EXP_DEVCAP2_TPH_COMP_TPH_ONLY 0x1 /* TPH only */ +#define PCI_EXP_DEVCAP2_TPH_COMP_EXT_TPH 0x3 /* TPH and Extended TPH */ + /* TPH Requester */ #define PCI_TPH_CAP 4 /* capability register */ -#define PCI_TPH_CAP_LOC_MASK 0x600 /* location mask */ -#define PCI_TPH_LOC_NONE 0x000 /* no location */ -#define PCI_TPH_LOC_CAP 0x200 /* in capability */ -#define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */ -#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* ST table mask */ -#define PCI_TPH_CAP_ST_SHIFT 16 /* ST table shift */ -#define PCI_TPH_BASE_SIZEOF 0xc /* size with no ST table */ +#define PCI_TPH_CAP_ST_NS 0x00000001 /* No ST Mode Supported */ +#define PCI_TPH_CAP_ST_IV 0x00000002 /* Interrupt Vector Mode Supported */ +#define PCI_TPH_CAP_ST_DS 0x00000004 /* Device Specific Mode Supported */ +#define PCI_TPH_CAP_EXT_TPH 0x00000100 /* Ext TPH Requester Supported */ +#define PCI_TPH_CAP_LOC_MASK 0x00000600 /* ST Table Location */ +#define PCI_TPH_LOC_NONE 0x00000000 /* Not present */ +#define PCI_TPH_LOC_CAP 0x00000200 /* In capability */ +#define PCI_TPH_LOC_MSIX 0x00000400 /* In MSI-X */ +#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* ST Table Size */ +#define PCI_TPH_CAP_ST_SHIFT 16 /* ST Table Size shift */ +#define PCI_TPH_BASE_SIZEOF 0xc /* Size with no ST table */ + +#define PCI_TPH_CTRL 8 /* control register */ +#define PCI_TPH_CTRL_MODE_SEL_MASK 0x00000007 /* ST Mode Select */ +#define PCI_TPH_ST_NS_MODE 0x0 /* No ST Mode */ +#define PCI_TPH_ST_IV_MODE 0x1 /* Interrupt Vector Mode */ +#define PCI_TPH_ST_DS_MODE 0x2 /* Device Specific Mode */ +#define PCI_TPH_CTRL_REQ_EN_MASK 0x00000300 /* TPH Requester Enable */ +#define PCI_TPH_REQ_DISABLE 0x0 /* No TPH requests allowed */ +#define PCI_TPH_REQ_TPH_ONLY 0x1 /* TPH only requests allowed */ +#define PCI_TPH_REQ_EXT_TPH 0x3 /* Extended TPH requests allowed */ /* Downstream Port Containment */ #define PCI_EXP_DPC_CAP 0x04 /* DPC Capability */ |