| Age | Commit message (Collapse) | Author |
|---|
|
indexing mode
The multiplier is already promoted to unsigned long, however the
frequency calculations done when using level indexing mode doesn't
use the multiplier computed. It instead hardcodes the multiplier
value of 1000 at all the usage sites.
Clean that up by assigning the multiplier value of 1000 when using
the perf level indexing mode and update the frequency calculations to
use the multiplier instead. It should fix the possible frequency
truncation for all the values greater than or equal to 4GHz on 64-bit
machines.
Fixes: 31c7c1397a33 ("firmware: arm_scmi: Add v3.2 perf level indexing mode support")
Reported-by: Sibi Sankar <quic_sibis@quicinc.com>
Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231130204343.503076-2-sudeep.holla@arm.com
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Fix the possible frequency truncation for all values equal to or greater
4GHz on 64bit machines by updating the multiplier 'mult_factor' to
'unsigned long' type. It is also possible that the multiplier itself can
be greater than or equal to 2^32. So we need to also fix the equation
computing the value of the multiplier.
Fixes: a9e3fbfaa0ff ("firmware: arm_scmi: add initial support for performance protocol")
Reported-by: Sibi Sankar <quic_sibis@quicinc.com>
Closes: https://lore.kernel.org/all/20231129065748.19871-3-quic_sibis@quicinc.com/
Cc: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231130204343.503076-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_aldps_en().
Fixes: 4214cc550bf9 ("r8152: check if disabling ALDPS is finished")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in r8153_pre_firmware_1().
Fixes: 9370f2d05a2a ("r8152: support request_firmware for RTL8153")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set
so that they don't delay too long if the device becomes
inaccessible. Add the break to the loop in
r8156b_wait_loading_flash().
Fixes: 195aae321c82 ("r8152: support new chips")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previous commits added checks for RTL8152_INACCESSIBLE in the loops in
the driver. There are still a few more that keep tripping the driver
up in error cases and make things take longer than they should. Add
those in.
All the loops that are part of this commit existed in some form or
another since the r8152 driver was first introduced, though
RTL8152_INACCESSIBLE was known as RTL8152_UNPLUG before commit
715f67f33af4 ("r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE")
Fixes: ac718b69301c ("net/usb: new driver for RTL8152")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As of commit d9962b0d4202 ("r8152: Block future register access if
register access fails") there is a race condition that can happen
between the USB device reset thread and napi_enable() (not) getting
called during rtl8152_open(). Specifically:
* While rtl8152_open() is running we get a register access error
that's _not_ -ENODEV and queue up a USB reset.
* rtl8152_open() exits before calling napi_enable() due to any reason
(including usb_submit_urb() returning an error).
In that case:
* Since the USB reset is perform in a separate thread asynchronously,
it can run at anytime USB device lock is not held - even before
rtl8152_open() has exited with an error and caused __dev_open() to
clear the __LINK_STATE_START bit.
* The rtl8152_pre_reset() will notice that the netif_running() returns
true (since __LINK_STATE_START wasn't cleared) so it won't exit
early.
* rtl8152_pre_reset() will then hang in napi_disable() because
napi_enable() was never called.
We can fix the race by making sure that the r8152 reset routines don't
run at the same time as we're opening the device. Specifically we need
the reset routines in their entirety rely on the return value of
netif_running(). The only way to reliably depend on that is for them
to hold the rntl_lock() mutex for the duration of reset.
Grabbing the rntl_lock() mutex for the duration of reset seems like a
long time, but reset is not expected to be common and the rtnl_lock()
mutex is already held for long durations since the core grabs it
around the open/close calls.
Fixes: d9962b0d4202 ("r8152: Block future register access if register access fails")
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ensure that the following values are little-endian:
- header->pad (which is used for cport_id)
- header->size
Fixes: ec558bbfea67 ("greybus: Add BeaglePlay Linux Driver")
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/r/202311072329.Xogj7hGW-lkp@intel.com/
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Link: https://lore.kernel.org/r/20231203075312.255233-1-ayushdevel1325@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The gb-beagleplay driver uses crc_ccitt(), so it should select
CRC_CCITT to make sure that the function is available.
Fixes these build errors:
s390-linux-ld: drivers/greybus/gb-beagleplay.o: in function `hdlc_append_tx_u8':
gb-beagleplay.c:(.text+0x2c0): undefined reference to `crc_ccitt'
s390-linux-ld: drivers/greybus/gb-beagleplay.o: in function `hdlc_rx_frame':
gb-beagleplay.c:(.text+0x6a0): undefined reference to `crc_ccitt'
Fixes: ec558bbfea67 ("greybus: Add BeaglePlay Linux Driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ayush Singh <ayushdevel1325@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: greybus-dev@lists.linaro.org
Link: https://lore.kernel.org/r/20231031040909.21201-1-rdunlap@infradead.org
Reviewed-by: Ayush Singh <ayushdevel1325@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit f4acfcd4deb1 ("debugfs: annotate debugfs handlers
vs. removal with lockdep"), it appears to have false positives and
really shouldn't have been in the -rc series with the fixes anyway.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20231202114936.fd55431ab160.I911aa53abeeca138126f690d383a89b13eb05667@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need 6.7-rc4 in here as we need to revert one of the debugfs changes
that came in that release through the wireless tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Callers of mutex_unlock() have to make sure that the mutex stays alive
for the whole duration of the function call. For io_uring that means
that the following pattern is not valid unless we ensure that the
context outlives the mutex_unlock() call.
mutex_lock(&ctx->uring_lock);
req_put(req); // typically via io_req_task_submit()
mutex_unlock(&ctx->uring_lock);
Most contexts are fine: io-wq pins requests, syscalls hold the file,
task works are taking ctx references and so on. However, the task work
fallback path doesn't follow the rule.
Cc: <stable@vger.kernel.org>
Fixes: 04fc6c802d ("io_uring: save ctx put/get for task_work submit")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/io-uring/CAG48ez3xSoYb+45f1RLtktROJrpiDQ1otNvdR+YLQf7m+Krj5Q@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no point in calling hid_hw_stop() if hid_hw_start() has failed.
There is no point in calling hid_hw_close() if hid_hw_open() has failed.
Update the error handling path accordingly.
Fixes: 82e3430dfa8c ("hwmon: add driver for NZXT Kraken X42/X52/X62/X72")
Reported-by: Aleksa Savic <savicaleksa83@gmail.com>
Closes: https://lore.kernel.org/all/121470f0-6c1f-418a-844c-7ec2e8a54b8e@gmail.com/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jonas Malaco <jonas@protocubo.io>
Link: https://lore.kernel.org/r/a768e69851a07a1f4e29f270f4e2559063f07343.1701617030.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
|
|
The ASUS UM3504DA uses a Realtek HDA codec and two CS35L41 amplifiers via I2C.
Apply existing quirk to model.
Signed-off-by: Pascal Noël <pascal@pascalcompiles.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231202013744.12369-1-pascal@pascalcompiles.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull smb client fixes from Steve French:
- Two fallocate fixes
- Fix warnings from new gcc
- Two symlink fixes
* tag 'v6.7-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client, common: fix fortify warnings
cifs: Fix FALLOC_FL_INSERT_RANGE by setting i_size after EOF moved
cifs: Fix FALLOC_FL_ZERO_RANGE by setting i_size if EOF moved
smb: client: report correct st_size for SMB and NFS symlinks
smb: client: fix missing mode bits for SMB symlinks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single patch to fix long-standing issue of memory leak at failure of
device registration for fw_unit. We rarely encounter the issue, but it
should be applied to stable releases, since it fixes inappropriate API
usage"
* tag 'firewire-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix possible memory leak in create_units()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix corruption of f0/vs0 during FP/Vector save, seen as userspace
crashes when using io-uring workers (in particular with MariaDB)
- Fix KVM_RUN potentially clobbering all host userspace FP/Vector
registers
Thanks to Timothy Pearson, Jens Axboe, and Nicholas Piggin.
* tag 'powerpc-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix KVM_RUN clobbering FP/VEC user registers
powerpc: Don't clobber f0/vs0 during fp|altivec register save
|
|
Pull vfio fixes from Alex Williamson:
- Fix the lifecycle of a mutex in the pds variant driver such that a
reset prior to opening the device won't find it uninitialized.
Implement the release path to symmetrically destroy the mutex. Also
switch a different lock from spinlock to mutex as the code path has
the potential to sleep and doesn't need the spinlock context
otherwise (Brett Creeley)
- Fix an issue detected via randconfig where KVM tries to symbol_get an
undeclared function. The symbol is temporarily declared
unconditionally here, which resolves the problem and avoids churn
relative to a series pending for the next merge window which resolves
some of this symbol ugliness, but also fixes Kconfig dependencies
(Sean Christopherson)
* tag 'vfio-v6.7-rc4' of https://github.com/awilliam/linux-vfio:
vfio: Drop vfio_file_iommu_group() stub to fudge around a KVM wart
vfio/pds: Fix possible sleep while in atomic context
vfio/pds: Fix mutex lock->magic != lock warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A fix for the Xen event driver setting the correct return value when
experiencing an allocation failure
- A fix for allocating space for a struct in the percpu area to not
cross page boundaries (this one is for x86, a similar one for Arm was
already in the pull request for rc3)
* tag 'for-linus-6.7a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: fix error code in xen_bind_pirq_msi_to_irq()
x86/xen: fix percpu vcpu_info allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- objpool: Fix objpool overrun case on memory/cache access delay
especially on the big.LITTLE SoC. The objpool uses a copy of object
slot index internal loop, but the slot index can be changed on
another processor in parallel. In that case, the difference of 'head'
local copy and the 'slot->last' index will be bigger than local slot
size. In that case, we need to re-read the slot::head to update it.
- kretprobe: Fix to use appropriate rcu API for kretprobe holder. Since
kretprobe_holder::rp is RCU managed, it should use
rcu_assign_pointer() and rcu_dereference_check() correctly. Also
adding __rcu tag for finding wrong usage by sparse.
- rethook: Fix to use appropriate rcu API for rethook::handler. The
same as kretprobe, rethook::handler is RCU managed and it should use
rcu_assign_pointer() and rcu_dereference_check(). This also adds
__rcu tag for finding wrong usage by sparse.
* tag 'probes-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rethook: Use __rcu pointer for rethook::handler
kprobes: consistent rcu api usage for kretprobe holder
lib: objpool: fix head overrun on RK3588 SBC
|
|
When FIFO reaches near full state, device will issue pause frame.
If pause slot is enabled(set to 1), in this time, device will issue
pause frame only once. But if pause slot is disabled(set to 0), device
will keep sending pause frames until FIFO reaches near empty state.
When pause slot is disabled, if there is no one to handle receive
packets, device FIFO will reach near full state and keep sending
pause frames. That will impact entire local area network.
This issue can be reproduced in Chromebox (not Chromebook) in
developer mode running a test image (and v5.10 kernel):
1) ping -f $CHROMEBOX (from workstation on same local network)
2) run "powerd_dbus_suspend" from command line on the $CHROMEBOX
3) ping $ROUTER (wait until ping fails from workstation)
Takes about ~20-30 seconds after step 2 for the local network to
stop working.
Fix this issue by enabling pause slot to only send pause frame once
when FIFO reaches near full state.
Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Reported-by: Grant Grundler <grundler@chromium.org>
Tested-by: Grant Grundler <grundler@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231129155350.5843-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pinctrls for the hym8563 interrupt line and fan-tach input
were both mistakenly defined as `pcfg_pull_none`. As these are
active-low signals (level-triggered, in the hym8563 case) which
may not be driven at times, these should really be pull-up. The
lack of any bias results in spurious interrupts.
Fix this by modifying the `rockchip,pins` properties as necessary
to enable the pull-up resistors.
Fixes: 2806a69f3fef6 ("arm64: dts: rockchip: Add Turing RK1 SoM support")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20231202071212.1606800-1-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Commit in Fixes added an AMD-specific microcode callback. However, it
didn't check the CPU vendor the kernel runs on explicitly.
The only reason the Zenbleed check in it didn't run on other x86 vendors
hardware was pure coincidental luck:
if (!cpu_has_amd_erratum(c, amd_zenbleed))
return;
gives true on other vendors because they don't have those families and
models.
However, with the removal of the cpu_has_amd_erratum() in
05f5f73936fa ("x86/CPU/AMD: Drop now unused CPU erratum checking function")
that coincidental condition is gone, leading to the zenbleed check
getting executed on other vendors too.
Add the explicit vendor check for the whole callback as it should've
been done in the first place.
Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix")
Cc: <stable@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231201184226.16749-1-bp@alien8.de
|
|
rndis_filter uses utf8s_to_utf16s() which is provided by setting
NLS, so select NLS to fix the build error:
ERROR: modpost: "utf8s_to_utf16s" [drivers/net/hyperv/hv_netvsc.ko] undefined!
Fixes: 1ce09e899d28 ("hyperv: Add support for setting MAC from within guests")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20231130055853.19069-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.7
Pull MD fix from Song:
"This change fixes issue with raid456 reshape."
* tag 'md-fixes-20231201-1' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid6: use valid sector values to determine if an I/O should wait on the reshape
|
|
When an EEH error is encountered by a PCI adapter, the EEH driver
modifies the PCI channel's state as shown below:
enum {
/* I/O channel is in normal state */
pci_channel_io_normal = (__force pci_channel_state_t) 1,
/* I/O to channel is blocked */
pci_channel_io_frozen = (__force pci_channel_state_t) 2,
/* PCI card is dead */
pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
};
If the same EEH error then causes the tg3 driver's transmit timeout
logic to execute, the tg3_tx_timeout() function schedules a reset
task via tg3_reset_task_schedule(), which may cause a race condition
between the tg3 and EEH driver as both attempt to recover the HW via
a reset action.
EEH driver gets error event
--> eeh_set_channel_state()
and set device to one of
error state above scheduler: tg3_reset_task() get
returned error from tg3_init_hw()
--> dev_close() shuts down the interface
tg3_io_slot_reset() and
tg3_io_resume() fail to
reset/resume the device
To resolve this issue, we avoid the race condition by checking the PCI
channel state in the tg3_reset_task() function and skip the tg3 driver
initiated reset when the PCI channel is not in the normal state. (The
driver has no access to tg3 device registers at this point and cannot
even complete the reset task successfully without external assistance.)
We'll leave the reset procedure to be managed by the EEH driver which
calls the tg3_io_error_detected(), tg3_io_slot_reset() and
tg3_io_resume() functions as appropriate.
Adding the same checking in tg3_dump_state() to avoid dumping all
device registers when the PCI channel is not in the normal state.
Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com>
Tested-by: Venkata Sai Duggi <venkata.sai.duggi@ibm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201001911.656-1-thinhtr@linux.vnet.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix issues in two cpufreq drivers, in the AMD P-state driver and
in the power-capping DTPM framework.
Specifics:
- Fix the AMD P-state driver's EPP sysfs interface in the cases when
the performance governor is in use (Ayush Jain)
- Make the ->fast_switch() callback in the AMD P-state driver return
the target frequency as expected (Gautham R. Shenoy)
- Allow user space to control the range of frequencies to use via
scaling_min_freq and scaling_max_freq when AMD P-state driver is in
use (Wyes Karny)
- Prevent power domains needed for wakeup signaling from being turned
off during system suspend on Qualcomm systems and prevent
performance states votes from runtime-suspended devices from being
lost across a system suspend-resume cycle in qcom-cpufreq-nvmem
(Stephan Gerhold)
- Fix disabling the 792 Mhz OPP in the imx6q cpufreq driver for the
i.MX6ULL types that can run at that frequency (Christoph
Niedermaier)
- Eliminate unnecessary and harmful conversions to uW from the DTPM
(dynamic thermal and power management) framework (Lukasz Luba)"
* tag 'pm-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Only print supported EPP values for performance governor
cpufreq/amd-pstate: Fix scaling_min_freq and scaling_max_freq update
powercap: DTPM: Fix unneeded conversions to micro-Watts
cpufreq/amd-pstate: Fix the return value of amd_pstate_fast_switch()
pmdomain: qcom: rpmpd: Set GENPD_FLAG_ACTIVE_WAKEUP
cpufreq: qcom-nvmem: Preserve PM domain votes in system suspend
cpufreq: qcom-nvmem: Enable virtual power domain devices
cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"This fixes a recently introduced build issue on ARM32 and a NULL
pointer dereference in the ACPI backlight driver due to a design issue
exposed by a recent change in the ACPI bus type code.
Specifics:
- Fix a recently introduced build issue on ARM32 platforms caused by
an inadvertent header file breakage (Dave Jiang)
- Eliminate questionable usage of acpi_driver_data() in the ACPI
backlight cooling device code that leads to NULL pointer
dereferences after recent ACPI core changes (Hans de Goede)"
* tag 'acpi-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Use acpi_video_device for cooling-dev driver data
ACPI: Fix ARM32 platforms compile issue introduced by fw_table changes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix a regression where the arm64 KPTI ends up enabled even on systems
that don't need it"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Avoid enabling KPTI unnecessarily
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix race conditions in device probe path
- Handle ERR_PTR() returns in __iommu_domain_alloc() path
- Update MAINTAINERS entry for Qualcom IOMMUs
- Printk argument fix in device tree specific code
- Several Intel VT-d fixes from Lu Baolu:
- Do not support enforcing cache coherency for non-empty domains
- Avoid devTLB invalidation if iommu is off
- Disable PCI ATS in legacy passthrough mode
- Support non-PCI devices when clearing context
- Fix incorrect cache invalidation for mm notification
- Add MTL to quirk list to skip TE disabling
- Set variable intel_dirty_ops to static
* tag 'iommu-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Fix printk arg in of_iommu_get_resv_regions()
iommu/vt-d: Set variable intel_dirty_ops to static
iommu/vt-d: Fix incorrect cache invalidation for mm notification
iommu/vt-d: Add MTL to quirk list to skip TE disabling
iommu/vt-d: Make context clearing consistent with context mapping
iommu/vt-d: Disable PCI ATS in legacy passthrough mode
iommu/vt-d: Omit devTLB invalidation requests when TES=0
iommu/vt-d: Support enforce_cache_coherency only for empty domains
iommu: Avoid more races around device probe
MAINTAINERS: list all Qualcomm IOMMU drivers in the QUALCOMM IOMMU entry
iommu: Flow ERR_PTR out from __iommu_domain_alloc()
|
|
Bpf cpu=v4 support is introduced in [1] and Commit 4cd58e9af8b9
("bpf: Support new 32bit offset jmp instruction") added support for new
32bit offset jmp instruction. Unfortunately, in function
bpf_adj_delta_to_off(), for new branch insn with 32bit offset, the offset
(plus/minor a small delta) compares to 16-bit offset bound
[S16_MIN, S16_MAX], which caused the following verification failure:
$ ./test_progs-cpuv4 -t verif_scale_pyperf180
...
insn 10 cannot be patched due to 16-bit range
...
libbpf: failed to load object 'pyperf180.bpf.o'
scale_test:FAIL:expect_success unexpected error: -12 (errno 12)
#405 verif_scale_pyperf180:FAIL
Note that due to recent llvm18 development, the patch [2] (already applied
in bpf-next) needs to be applied to bpf tree for testing purpose.
The fix is rather simple. For 32bit offset branch insn, the adjusted
offset compares to [S32_MIN, S32_MAX] and then verification succeeded.
[1] https://lore.kernel.org/all/20230728011143.3710005-1-yonghong.song@linux.dev
[2] https://lore.kernel.org/bpf/20231110193644.3130906-1-yonghong.song@linux.dev
Fixes: 4cd58e9af8b9 ("bpf: Support new 32bit offset jmp instruction")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231201024640.3417057-1-yonghong.song@linux.dev
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No surprise here, including only a collection of HD-audio
device-specific small fixes"
* tag 'sound-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: Disable power-save on KONTRON SinglePC
ALSA: hda/realtek: Add supported ALC257 for ChromeOS
ALSA: hda/realtek: Headset Mic VREF to 100%
ALSA: hda: intel-nhlt: Ignore vbps when looking for DMIC 32 bps format
ALSA: hda: cs35l56: Enable low-power hibernation mode on SPI
ALSA: cs35l41: Fix for old systems which do not support command
ALSA: hda: cs35l41: Remove unnecessary boolean state variable firmware_running
ALSA: hda - Fix speaker and headset mic pin config for CHUWI CoreBook XPro
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, mostly amdgpu fixes with a scattering of nouveau, i915,
and a couple of reverts. Hopefully it will quieten down in coming
weeks.
drm:
- Revert unexport of prime helpers for fd/handle conversion
dma_resv:
- Do not double add fences in dma_resv_add_fence.
gpuvm:
- Fix GPUVM license identifier.
i915:
- Mark internal GSC engine with reserved uabi class
- Take VGA converters into account in eDP probe
- Fix intel_pre_plane_updates() call to ensure workarounds get applied
panel:
- Revert panel fixes as they require exporting device_is_dependent.
nouveau:
- fix oversized allocations in new vm path
- fix zero-length array
- remove a stray lock
nt36523:
- Fix error check for nt36523.
amdgpu:
- DMUB fix
- DCN 3.5 fixes
- XGMI fix
- DCN 3.2 fixes
- Vangogh suspend fix
- NBIO 7.9 fix
- GFX11 golden register fix
- Backlight fix
- NBIO 7.11 fix
- IB test overflow fix
- DCN 3.1.4 fixes
- fix a runtime pm ref count
- Retimer fix
- ABM fix
- DCN 3.1.5 fix
- Fix AGP addressing
- Fix possible memory leak in SMU error path
- Make sure PME is enabled in D3
- Fix possible NULL pointer dereference in debugfs
- EEPROM fix
- GC 9.4.3 fix
amdkfd:
- IP version check fix
- Fix memory leak in pqm_uninit()"
* tag 'drm-fixes-2023-12-01' of git://anongit.freedesktop.org/drm/drm: (53 commits)
Revert "drm/prime: Unexport helpers for fd/handle conversion"
drm/amdgpu: Use another offset for GC 9.4.3 remap
drm/amd/display: Fix some HostVM parameters in DML
drm/amdkfd: Free gang_ctx_bo and wptr_bo in pqm_uninit
drm/amdgpu: Update EEPROM I2C address for smu v13_0_0
drm/amd/display: Allow DTBCLK disable for DCN35
drm/amdgpu: Fix cat debugfs amdgpu_regs_didt causes kernel null pointer
drm/amd: Enable PCIe PME from D3
drm/amd/pm: fix a memleak in aldebaran_tables_init
drm/amdgpu: fix AGP addressing when GART is not at 0
drm/amd/display: update dcn315 lpddr pstate latency
drm/amd/display: fix ABM disablement
drm/amd/display: Fix black screen on video playback with embedded panel
drm/amd/display: Fix conversions between bytes and KB
drm/amdkfd: Use common function for IP version check
drm/amd/display: Remove config update
drm/amd/display: Update DCN35 clock table policy
drm/amd/display: force toggle rate wa for first link training for a retimer
drm/amdgpu: correct the amdgpu runtime dereference usage count
drm/amd/display: Update min Z8 residency time to 2100 for DCN314
...
|
|
reshape
During a reshape or a RAID6 array such as expanding by adding an additional
disk, I/Os to the region of the array which have not yet been reshaped can
stall indefinitely. This is from errors in the stripe_ahead_of_reshape
function causing md to think the I/O is to a region in the actively
undergoing the reshape.
stripe_ahead_of_reshape fails to account for the q disk having a sector
value of 0. By not excluding the q disk from the for loop, raid6 will always
generate a min_sector value of 0, causing a return value which stalls.
The function's max_sector calculation also uses min() when it should use
max(), causing the max_sector value to always be 0. During a backwards
rebuild this can cause the opposite problem where it allows I/O to advance
when it should wait.
Fixing these errors will allow safe I/O to advance in a timely manner and
delay only I/O which is unsafe due to stripes in the middle of undergoing
the reshape.
Fixes: 486f60558607 ("md/raid5: Check all disks in a stripe_head for reshape progress")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231128181233.6187-1-djeffery@redhat.com
|
|
Pull io_uring fixes from Jens Axboe:
- Fix an issue with discontig page checking for IORING_SETUP_NO_MMAP
- Fix an issue with not allowing IORING_SETUP_NO_MMAP also disallowing
mmap'ed buffer rings
- Fix an issue with deferred release of memory mapped pages
- Fix a lockdep issue with IORING_SETUP_NO_MMAP
- Use fget/fput consistently, even from our sync system calls. No real
issue here, but if we were ever to allow closing io_uring descriptors
it would be required. Let's play it safe and just use the full ref
counted versions upfront. Most uses of io_uring are threaded anyway,
and hence already doing the full version underneath.
* tag 'io_uring-6.7-2023-11-30' of git://git.kernel.dk/linux:
io_uring: use fget/fput consistently
io_uring: free io_buffer_list entries via RCU
io_uring/kbuf: prune deferred locked cache when tearing down
io_uring/kbuf: recycle freed mapped buffer ring entries
io_uring/kbuf: defer release of mapped buffer rings
io_uring: enable io_mem_alloc/free to be used in other parts
io_uring: don't guard IORING_OFF_PBUF_RING with SETUP_NO_MMAP
io_uring: don't allow discontig pages for IORING_SETUP_NO_MMAP
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Invalid namespace identification error handling (Marizio Ewan,
Keith)
- Fabrics keep-alive tuning (Mark)
- Fix for a bad error check regression in bcache (Markus)
- Fix for a performance regression with O_DIRECT (Ming)
- Fix for a flush related deadlock (Ming)
- Make the read-only warn on per-partition (Yu)
* tag 'block-6.7-2023-12-01' of git://git.kernel.dk/linux:
nvme-core: check for too small lba shift
blk-mq: don't count completed flush data request as inflight in case of quiesce
block: Document the role of the two attribute groups
block: warn once for each partition in bio_check_ro()
block: move .bd_inode into 1st cacheline of block_device
nvme: check for valid nvme_identify_ns() before using it
nvme-core: fix a memory leak in nvme_ns_info_from_identify()
nvme: fine-tune sending of first keep-alive
bcache: revert replacing IS_ERR_OR_NULL with IS_ERR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM verity target's FEC support to always initialize IO before it
frees it. Also fix alignment of struct dm_verity_fec_io within the
per-bio-data
- Fix DM verity target to not FEC failed readahead IO
- Update DM flakey target to use MAX_ORDER rather than MAX_ORDER - 1
* tag 'dm-6.7/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-flakey: start allocating with MAX_ORDER
dm-verity: align struct dm_verity_fec_io properly
dm verity: don't perform FEC for failed readahead IO
dm verity: initialize fec io before freeing it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes, one in drivers.
The core changes are to the internal representation of flags in
scsi_devices which removes space wasting bools in favour of single bit
flags and to add a flag to force a runtime resume which is used by ATA
devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Fix system start for ATA devices
scsi: Change SCSI device boolean fields to single bit flags
scsi: ufs: core: Clear cmd if abort succeeds in MCQ mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2 fix from Jan Kara:
"Fix an ext2 bug introduced by changes in ext2 & iomap stepping on each
other toes (apparently ext2 driver does not get much testing in
linux-next)"
* tag 'fs_for_v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Fix ki_pos update for DIO buffered-io fallback case
|
|
Pull more bcachefs bugfixes from Kent Overstreet:
- bcache & bcachefs were broken with CFI enabled; patch for closures to
fix type punning
- mark erasure coding as extra-experimental; there are incompatible
disk space accounting changes coming for erasure coding, and I'm
still seeing checksum errors in some tests
- several fixes for durability-related issues (durability is a device
specific setting where we can tell bcachefs that data on a given
device should be counted as replicated x times)
- a fix for a rare livelock when a btree node merge then updates a
parent node that is almost full
- fix a race in the device removal path, where dropping a pointer in a
btree node to a device would be clobbered by an in flight btree write
updating the btree node key on completion
- fix one SRCU lock hold time warning in the btree gc code - ther's
still a bunch more of these to fix
- fix a rare race where we'd start copygc before initializing the "are
we rw" percpu refcount; copygc would think we were already ro and die
immediately
* tag 'bcachefs-2023-11-29' of https://evilpiepirate.org/git/bcachefs: (23 commits)
bcachefs: Extra kthread_should_stop() calls for copygc
bcachefs: Convert gc_alloc_start() to for_each_btree_key2()
bcachefs: Fix race between btree writes and metadata drop
bcachefs: move journal seq assertion
bcachefs: -EROFS doesn't count as move_extent_start_fail
bcachefs: trace_move_extent_start_fail() now includes errcode
bcachefs: Fix split_race livelock
bcachefs: Fix bucket data type for stripe buckets
bcachefs: Add missing validation for jset_entry_data_usage
bcachefs: Fix zstd compress workspace size
bcachefs: bpos is misaligned on big endian
bcachefs: Fix ec + durability calculation
bcachefs: Data update path won't accidentaly grow replicas
bcachefs: deallocate_extra_replicas()
bcachefs: Proper refcounting for journal_keys
bcachefs: preserve device path as device name
bcachefs: Fix an endianness conversion
bcachefs: Start gc, copygc, rebalance threads after initing writes ref
bcachefs: Don't stop copygc thread on device resize
bcachefs: Make sure bch2_move_ratelimit() also waits for move_ops
...
|
|
Merge a fix for a recently introduced build issue on ARM32 platforms
caused by an inadvertent header file breakage (Dave Jiang).
* acpi-tables:
ACPI: Fix ARM32 platforms compile issue introduced by fw_table changes
|
|
Merge a power capping fix for 6.7-rc4 which eliminates unnecessary
and harmful conversions to uW from the DTPM (dynamic thermal and power
management) framework (Lukasz Luba).
* powercap:
powercap: DTPM: Fix unneeded conversions to micro-Watts
|
|
The requested info will be stored in 'guest_xsave->region' referenced by
the incoming pointer "struct kvm_xsave *guest_xsave", thus there is no need
to explicitly use return void expression for a void function "static void
kvm_vcpu_ioctl_x86_get_xsave(...)". The issue is caught with [-Wpedantic].
Fixes: 2d287ec65e79 ("x86/fpu: Allow caller to constrain xfeatures when copying to uabi buffer")
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20231007064019.17472-1-likexu@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Revert KVM's misguided attempt to "fix" a use-after-module-unload bug that
was actually due to failure to flush a workqueue, not a lack of module
refcounting. Pinning the KVM module until kvm_vm_destroy() doesn't
prevent use-after-free due to the module being unloaded, as userspace can
invoke delete_module() the instant the last reference to KVM is put, i.e.
can cause all KVM code to be unmapped while KVM is actively executing said
code.
Generally speaking, the many instances of module_put(THIS_MODULE)
notwithstanding, outside of a few special paths, a module can never safely
put the last reference to itself without creating deadlock, i.e. something
external to the module *must* put the last reference. In other words,
having VMs grab a reference to the KVM module is futile, pointless, and as
evidenced by the now-reverted commit 70375c2d8fa3 ("Revert "KVM: set owner
of cpu and vm file operations""), actively dangerous.
This reverts commit 405294f29faee5de8c10cb9d4a90e229c2835279 and commit
5f6de5cbebee925a612856fce6f9182bb3eee0db.
Fixes: 405294f29fae ("KVM: Unconditionally get a ref to /dev/kvm module when creating a VM")
Fixes: 5f6de5cbebee ("KVM: Prevent module exit until all VMs are freed")
Link: https://lore.kernel.org/r/20231018204624.1905300-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Set .owner for all KVM-owned filed types so that the KVM module is pinned
until any files with callbacks back into KVM are completely freed. Using
"struct kvm" as a proxy for the module, i.e. keeping KVM-the-module alive
while there are active VMs, doesn't provide full protection.
Userspace can invoke delete_module() the instant the last reference to KVM
is put. If KVM itself puts the last reference, e.g. via kvm_destroy_vm(),
then it's possible for KVM to be preempted and deleted/unloaded before KVM
fully exits, e.g. when the task running kvm_destroy_vm() is scheduled back
in, it will jump to a code page that is no longer mapped.
Note, file types that can call into sub-module code, e.g. kvm-intel.ko or
kvm-amd.ko on x86, must use the module pointer passed to kvm_init(), not
THIS_MODULE (which points at kvm.ko). KVM assumes that if /dev/kvm is
reachable, e.g. VMs are active, then the vendor module is loaded.
To reduce the probability of forgetting to set .owner entirely, use
THIS_MODULE for stats files where KVM does not call back into vendor code.
This reverts commit 70375c2d8fa3fb9b0b59207a9c5df1e2e1205c10, and fixes
several other file types that have been buggy since their introduction.
Fixes: 70375c2d8fa3 ("Revert "KVM: set owner of cpu and vm file operations"")
Fixes: 3bcd0662d66f ("KVM: X86: Introduce mmu_rmaps_stat per-vm debugfs file")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/all/20231010003746.GN800259@ZenIV
Link: https://lore.kernel.org/r/20231018204624.1905300-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.7
- Invalid namespace identification error handling (Marizio Ewan, Keith)
- Fabrics keep-alive tuning (Mark)"
* tag 'nvme-6.7-2023-12-01' of git://git.infradead.org/nvme:
nvme-core: check for too small lba shift
nvme: check for valid nvme_identify_ns() before using it
nvme-core: fix a memory leak in nvme_ns_info_from_identify()
nvme: fine-tune sending of first keep-alive
|
|
The block layer doesn't support logical block sizes smaller than 512
bytes. The nvme spec doesn't support that small either, but the driver
isn't checking to make sure the device responded with usable data.
Failing to catch this will result in a kernel bug, either from a
division by zero when stacking, or a zero length bio.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Fix up the order that the device and negotiated features
are checked to get a more reliable difference when things
get changed.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20231110221802.46841-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
If the client driver is setting status to 0, something is
getting shutdown and possibly removed. Make sure we clear
the config_cb so that it doesn't end up crashing when
trying to call a bogus callback.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20231110221802.46841-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
