summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-03-09x86, mm: fix gup_pte_range() vs DAX mappingsDan Williams
gup_pte_range() fails to check pte_allows_gup() before translating a DAX pte entry, pte_devmap(), to a page. This allows writes to read-only mappings, and bypasses the DAX cacheline dirty tracking due to missed 'mkwrite' faults. The gup_huge_pmd() path and the gup_huge_pud() path correctly check pte_allows_gup() before checking for _devmap() entries. Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Link: http://lkml.kernel.org/r/148804251312.36605.12665024794196605053.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Dave Hansen <dave.hansen@linux.intel.com> Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Xiong Zhou <xzhou@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09power/mm: update pte_write and pte_wrprotect to handle savedwriteAneesh Kumar K.V
We use pte_write() to check whethwer the pte entry is writable. This is mostly used to later mark the pte read only if it is writable. The other use of pte_write() is to check whether the pte_entry is writable so that hardware page table entry can be marked accordingly. This is used in kvm where we look at qemu page table entry and update hardware hash page table for the guest with correct write enable bit. With the above, for the first usage we should also check the savedwrite bit so that we can correctly clear the savedwite bit. For the later, we add a new variant __pte_write(). With this we can revert write_protect_page part of 595cd8f256d2 ("mm/ksm: handle protnone saved writes when making page write protect"). But I left it as it is as an example code for savedwrite check. Fixes: c137a2757b886 ("powerpc/mm/autonuma: switch ppc64 to its own implementation of saved write") Link: http://lkml.kernel.org/r/1488203787-17849-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09powerpc/mm: handle protnone ptes on forkAneesh Kumar K.V
We need to mark pages of parent process read only on fork. Numa fault pte needs a protnone ptes variant with saved write flag set. On fork we need to make sure we remove the saved write bit. Instead of adding the protnone check in the caller update ptep_set_wrprotect variants to clear savedwrite bit. Without this we see random segfaults in application on fork. Fixes: c137a2757b886 ("powerpc/mm/autonuma: switch ppc64 to its own implementation of saved write") Link: http://lkml.kernel.org/r/1488203787-17849-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Rik van Riel <riel@surriel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09scripts/spelling.txt: add "overide" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: overide||override While we are here, fix the doubled "address" in the touched line Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt. Also, fix the comment block style in the touched hunks in drivers/media/dvb-frontends/drx39xyj/drx_driver.h. Link: http://lkml.kernel.org/r/1481573103-11329-21-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09scripts/spelling.txt: add "disble(d)" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: disble||disable disbled||disabled I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c untouched. The macro is not referenced at all, but this commit is touching only comment blocks just in case. Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09userfaultfd: shmem: __do_fault requires VM_FAULT_NOPAGEAndrea Arcangeli
__do_fault assumes vmf->page has been initialized and is valid if VM_FAULT_NOPAGE is not returned by vma->vm_ops->fault(vma, vmf). handle_userfault() in turn should return VM_FAULT_NOPAGE if it doesn't return VM_FAULT_SIGBUS or VM_FAULT_RETRY (the other two possibilities). This VM_FAULT_NOPAGE case is only invoked when signal are pending and it didn't matter for anonymous memory before. It only started to matter since shmem was introduced. hugetlbfs also takes a different path and doesn't exercise __do_fault. Link: http://lkml.kernel.org/r/20170228154201.GH5816@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09Merge tag 'pm-4.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix several issues in the intel_pstate driver and one issue in the schedutil cpufreq governor, clean up that governor a bit and hook up existing code for disabling cpufreq to a new kernel command line option. Specifics: - Three fixes for intel_pstate problems related to the passive mode (in which it acts as a regular cpufreq scaling driver), two for the handling of global P-state limits and one for the handling of the cpu_frequency tracepoint in that mode (Rafael Wysocki). - Three fixes for the handling of P-state limits in intel_pstate in the active mode (Rafael Wysocki). - Introduction of a new cpufreq.off=1 kernel command line argument that will disable cpufreq entirely if passed to the kernel and is simply hooked up to the existing code used by Xen (Len Brown). - Fix for the schedutil cpufreq governor to prevent it from using stale raw frequency values in configurations with mutiple CPUs sharing one policy object and a cleanup for it reducing its overhead slightly (Viresh Kumar)" * tag 'pm-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Do not reinit performance limits in ->setpolicy cpufreq: intel_pstate: Fix intel_pstate_verify_policy() cpufreq: intel_pstate: Fix global settings in active mode cpufreq: Add the "cpufreq.off=1" cmdline option cpufreq: schedutil: Pass sg_policy to get_next_freq() cpufreq: schedutil: move cached_raw_freq to struct sugov_policy cpufreq: intel_pstate: Avoid triggering cpu_frequency tracepoint unnecessarily cpufreq: intel_pstate: Fix intel_cpufreq_verify_policy() cpufreq: intel_pstate: Do not use performance_limits in passive mode
2017-03-09Merge tag 'pci-v4.11-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "PCI fixes: - fix NULL pointer dereference in Exynos driver - fix NULL pointer dereference in ASPM with pre-1.1 PCIe devices - blacklist QLogic ISP2722 to prevent panics while reading VPD" * tag 'pci-v4.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/ASPM: Always set link->downstream to avoid NULL dereference on remove PCI: Prevent VPD access for QLogic ISP2722 PCI: exynos: Initialize elbi_base even when using PHY framework
2017-03-09Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Sending this a bit sooner than I otherwise would have, as a fix in the merge window had some unfortunate issues and side effects for some folks. This contains: - Fixes from Jan for the bdi registration/unregistration. These have been tested by the various parties reporting issues, and should be solid at this point. - Also from Jan, fix for axonram gendisk registration. - A stable fix for zram from Johannes. - A small series from Ming, fixing up some long standing issues with blk-mq hardware queue kobject initialization and registration. - A fix for sed opal from Jon, fixing a nonsensical range check and some set-but-not-used variables. - A fix from Neil for a long standing deadlock issue for stacking device drivers. With this in place, dm/md don't have to work around the issue anymore, and can be properly fixed up" * 'for-linus' of git://git.kernel.dk/linux-block: axonram: Fix gendisk handling blk: improve order of bio handling in generic_make_request() Revert "scsi, block: fix duplicate bdi name registration crashes" block: Make del_gendisk() safer for disks without queues bdi: Fix use-after-free in wb_congested_put() block: Allow bdi re-registration block/sed: Fix opal user range check and unused variables zram: set physical queue limits to avoid array out of bounds accesses blk-mq: free hctx->cpumask in release handler of hctx's kobject blk-mq: make lifetime consistent between hctx and its kobject blk-mq: make lifetime consitent between q/ctx and its kobject blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue()
2017-03-09Merge tag 'media/v4.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Media regression fixes: - serial_ir: fix a Kernel crash during boot on Kernel 4.11-rc1, due to an IRQ code called too early - other IR regression fixes at lirc and at the raw IR decoding - a deadlock fix at the RC nuvoton driver - fix another issue with DMA on stack at dw2102 driver There's an extra patch there that change a driver interface for the SoC VSP1 driver, with is shared between the DRM and V4L2 driver. The patch itself is trivial, and was acked by David Arlie" * tag 'media/v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] v4l: vsp1: Adapt vsp1_du_setup_lif() interface to use a structure [media] dw2102: don't do DMA on stack [media] rc: protocol is not set on register for raw IR devices [media] rc: raw decoder for keymap protocol is not loaded on register [media] rc: nuvoton: fix deadlock in nvt_write_wakeup_codes [media] lirc: fix dead lock between open and wakeup_filter [media] serial_ir: ensure we're ready to receive interrupts
2017-03-09s390: wire up statx system callHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-09drm/amdgpu: bump driver version for some new featuresAlex Deucher
We added new gem ioctl flags and the new fences ioctl, but forgot to bump the version. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-09drm/amdgpu: validate paramaters in the gem ioctlAlex Deucher
Reject it if there are any invalid flags or domains. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-09Merge tag 'for-linus-4.11-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix and cleanup from Juergen Gross: "This contains one fix for MSIX handling under Xen and a trivial cleanup patch" * tag 'for-linus-4.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xenbus: Remove duplicate inclusion of linux/init.h xen: do not re-use pirq number cached in pci device msi msg data
2017-03-09mm: introduce __p4d_alloc()Kirill A. Shutemov
For full 5-level paging we need a helper to allocate p4d page table. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09mm: convert generic code to 5-level pagingKirill A. Shutemov
Convert all non-architecture-specific code to 5-level paging. It's mostly mechanical adding handling one more page table level in places where we deal with pud_t. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09asm-generic: introduce <asm-generic/pgtable-nop4d.h>Kirill A. Shutemov
Like with pgtable-nopud.h for 4-level paging, this new header is base for converting an architectures to properly folded p4d_t level. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09arch, mm: convert all architectures to use 5level-fixup.hKirill A. Shutemov
If an architecture uses 4level-fixup.h we don't need to do anything as it includes 5level-fixup.h. If an architecture uses pgtable-nop*d.h, define __ARCH_USE_5LEVEL_HACK before inclusion of the header. It makes asm-generic code to use 5level-fixup.h. If an architecture has 4-level paging or folds levels on its own, include 5level-fixup.h directly. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09asm-generic: introduce __ARCH_USE_5LEVEL_HACKKirill A. Shutemov
We are going to introduce <asm-generic/pgtable-nop4d.h> to provide abstraction for properly (in opposite to 5level-fixup.h hack) folded p4d level. The new header will be included from pgtable-nopud.h. If an architecture uses <asm-generic/nop*d.h>, we cannot use 5level-fixup.h directly to quickly convert the architecture to 5-level paging as it would conflict with pgtable-nop4d.h. With this patch an architecture can define __ARCH_USE_5LEVEL_HACK before inclusion <asm-genenric/nop*d.h> to use 5level-fixup.h. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09asm-generic: introduce 5level-fixup.hKirill A. Shutemov
We are going to switch core MM to 5-level paging abstraction. This is preparation step which adds <asm-generic/5level-fixup.h> As with 4level-fixup.h, the new header allows quickly make all architectures compatible with 5-level paging in core MM. In long run we would like to switch architectures to properly folded p4d level by using <asm-generic/pgtable-nop4d.h>, but it requires more changes to arch-specific code. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09x86/cpufeature: Add 5-level paging detectionKirill A. Shutemov
Look for 'la57' in /proc/cpuinfo to see if your machine supports 5-level paging. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllersGuenter Roeck
Upstream commit 98d74f9ceaef ("xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers") fixes a problem with hot pluggable PCI xhci controllers which can result in excessive timeouts, to the point where the system reports a deadlock. The same problem is seen with hot pluggable xhci controllers using the xhci-plat driver, such as the driver used for Type-C ports on rk3399. Similar to hot-pluggable PCI controllers, the driver for this chip removes the xhci controller from the system when the Type-C cable is disconnected. The solution for PCI devices works just as well for non-PCI devices and avoids the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: host: xhci-dbg: HCIVERSION should be a binary numberPeter Chen
According to xHCI spec, HCIVERSION containing a BCD encoding of the xHCI specification revision number, 0100h corresponds to xHCI version 1.0. Change "100" as "0x100". Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable <stable@vger.kernel.org> Fixes: 04abb6de2825 ("xhci: Read and parse new xhci 1.1 capability register") Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: xhci: remove dummy extra_priv_size for size of xhci_hcd structChunfeng Yun
because hcd_priv_size is already size of xhci_hcd struct, extra_priv_size is not needed anymore for MTK and tegra drivers. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: xhci-mtk: check hcc_params after adding primary hcdChunfeng Yun
hcc_params is set in xhci_gen_setup() called from usb_add_hcd(), so checks the Maximum Primary Stream Array Size in the hcc_params register after adding primary hcd. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09Revert "i2c: copy device properties when using i2c_register_board_info()"Wolfram Sang
This reverts commit b0c1e95ab44feaad8831f2c06a3473c974003b49. It contains a flaw and the next version has more features added which makes me want to move it to the next cycle. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-09Merge branch 'i2c-mux/for-current' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang
i2c/for-current
2017-03-09Revert "i2c: add missing of_node_put in i2c_mux_del_adapters"Wolfram Sang
This reverts commit 02dbfa5e5583523035f05636c614a0eca77f1aab. I grabbed the wrong version from the list and will pull the proper one from Peter Rosin's mux tree. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-09i2c: exynos5: Avoid transaction timeouts due TRANSFER_DONE_AUTO not setJavier Martinez Canillas
After commit 7999eecb7e56 ("i2c: exynos5: fix arbitration lost handling"), some I2C transactions are failing because the TRANSFER_DONE_AUTO field is not set in the I2C_TRANS_STATUS register so the i2c->status value is left to -EINVAL causing the i2c->msg_complete completion to never be signaled. For example, when reading the time of an I2C rtc on an Exynos5800 machine: $ cat /sys/class/rtc/rtc0/time [ 25.924594] exynos5-hsi2c 12e10000.i2c: rx timeout [ 65.028365] max77686-rtc max77802-rtc: Fail to read time reg(-22) cat: /sys/class/rtc/rtc0/time: Invalid argument The Exynos5422 manual states clearly that most I2C_TRANS_STATUS reg bits (including TRANSFER_DONE_AUTO) are cleared after the register is read. So reading has side effects and should only be done if HSI2C_INT_I2C was set. Fixes: 7999eecb7e56 ("i2c: exynos5: fix arbitration lost handling") Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-03-09Merge tag 'kvm-arm-for-4.11-rc2' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/ARM updates for v4.11-rc2 vgic updates: - Honour disabling the ITS - Don't deadlock when deactivating own interrupts via MMIO - Correctly expose the lact of IRQ/FIQ bypass on GICv3 I/O virtualization: - Make KVM_CAP_NR_MEMSLOTS big enough for large guests with many PCIe devices General bug fixes: - Gracefully handle exception generated with syndroms that the host doesn't understand - Properly invalidate TLBs on VHE systems
2017-03-09KVM: nVMX: do not warn when MSR bitmap address is not backedRadim Krčmář
Before trying to do nested_get_page() in nested_vmx_merge_msr_bitmap(), we have already checked that the MSR bitmap address is valid (4k aligned and within physical limits). SDM doesn't specify what happens if the there is no memory mapped at the valid address, but Intel CPUs treat the situation as if the bitmap was configured to trap all MSRs. KVM already does that by returning false and a correct handling doesn't need the guest-trigerrable warning that was reported by syzkaller: (The warning was originally there to catch some possible bugs in nVMX.) ------------[ cut here ]------------ WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709 nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline] WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709 nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 7832 Comm: syz-executor1 Not tainted 4.10.0+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 panic+0x1fb/0x412 kernel/panic.c:179 __warn+0x1c4/0x1e0 kernel/panic.c:540 warn_slowpath_null+0x2c/0x40 kernel/panic.c:583 nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline] nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640 enter_vmx_non_root_mode arch/x86/kvm/vmx.c:10471 [inline] nested_vmx_run+0x6186/0xaab0 arch/x86/kvm/vmx.c:10561 handle_vmlaunch+0x1a/0x20 arch/x86/kvm/vmx.c:7312 vmx_handle_exit+0xfc0/0x3f00 arch/x86/kvm/vmx.c:8526 vcpu_enter_guest arch/x86/kvm/x86.c:6982 [inline] vcpu_run arch/x86/kvm/x86.c:7044 [inline] kvm_arch_vcpu_ioctl_run+0x1418/0x4840 arch/x86/kvm/x86.c:7205 kvm_vcpu_ioctl+0x673/0x1120 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2570 Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> [Jim Mattson explained the bare metal behavior: "I believe this behavior would be documented in the chipset data sheet rather than the SDM, since the chipset returns all 1s for an unclaimed read."] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-09Merge branch 'pm-cpufreq-sched'Rafael J. Wysocki
* pm-cpufreq-sched: cpufreq: schedutil: Pass sg_policy to get_next_freq() cpufreq: schedutil: move cached_raw_freq to struct sugov_policy
2017-03-09Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: intel_pstate: Do not reinit performance limits in ->setpolicy cpufreq: intel_pstate: Fix intel_pstate_verify_policy() cpufreq: intel_pstate: Fix global settings in active mode cpufreq: Add the "cpufreq.off=1" cmdline option cpufreq: intel_pstate: Avoid triggering cpu_frequency tracepoint unnecessarily cpufreq: intel_pstate: Fix intel_cpufreq_verify_policy() cpufreq: intel_pstate: Do not use performance_limits in passive mode
2017-03-09Merge tag 'irq-fixes-4.11-rc2' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip/irqdomain updates for 4.11-rc2 from Marc Zyngier - irqchip/crossbar: Some type tidying up - irqchip/gicv3-its: Workaround for a Qualcomm erratum - irqdomain: Compile for for systems that don't use CONFIG_IRQ_DOMAIN Fixed up minor conflict in the crossbar driver.
2017-03-09Merge tag 'usb-serial-4.11-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.11-rc2 Here's a fix for a digi_acceleport regression in -rc1, and some fixes for long-standing issues in three other drivers, including a NULL-pointer dereference and a couple of information leaks that could be triggered by a malicious device. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-09USB: serial: digi_acceleport: fix OOB-event processingJohan Hovold
A recent change claimed to fix an off-by-one error in the OOB-port completion handler, but instead introduced such an error. This could specifically led to modem-status changes going unnoticed, effectively breaking TIOCMGET. Note that the offending commit fixes a loop-condition underflow and is marked for stable, but should not be backported without this fix. Reported-by: Ben Hutchings <ben@decadent.org.uk> Fixes: 2d380889215f ("USB: serial: digi_acceleport: fix OOB data sanity check") Cc: stable <stable@vger.kernel.org> # v2.6.30 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09MAINTAINERS: usb251xb: remove reference inexistent fileRichard Leitner
The platform_data header file was dropped in the merged version of the USB251xB driver. Therefore remove its reference from the MAINTAINERS file. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09doc: dt-bindings: usb251xb: mark reg as requiredRichard Leitner
Mark the reg property as required and furthermore fix some typos and spellings in the documentation. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: usb251xb: dt: add unit suffix to oc-delay and power-on-timeRichard Leitner
Rename oc-delay-* to oc-delay-us and make it expect a time value. Furthermore add -ms suffix to power-on-time. There changes were suggested by Rob Herring in https://lkml.org/lkml/2017/2/15/1283. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: usb251xb: remove max_{power,current}_{sp,bp} propertiesRichard Leitner
Remove the max_{power,current}_{sp,bp} properties of the usb251xb driver from devicetree. This is done to simplify the dt bindings as requested by Rob Herring in https://lkml.org/lkml/2017/2/15/1283. If those properties are ever needed by somebody they can be enabled again easily. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb-storage: Add ignore-residue quirk for Initio INIC-3619Tobias Jakobi
This USB-SATA bridge chip is used in a StarTech enclosure for optical drives. Without the quirk MakeMKV fails during the key exchange with an installed BluRay drive: > Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED' > occurred while issuing SCSI command AD010..080002400 to device 'SG:dev_11:2' Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09USB: iowarrior: fix NULL-deref in writeJohan Hovold
Make sure to verify that we have the required interrupt-out endpoint for IOWarrior56 devices to avoid dereferencing a NULL-pointer in write should a malicious device lack such an endpoint. Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.") Cc: stable <stable@vger.kernel.org> # 2.6.21 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09USB: iowarrior: fix NULL-deref at probeJohan Hovold
Make sure to check for the required interrupt-in endpoint to avoid dereferencing a NULL-pointer should a malicious device lack such an endpoint. Note that a fairly recent change purported to fix this issue, but added an insufficient test on the number of endpoints only, a test which can now be removed. Fixes: 4ec0ef3a8212 ("USB: iowarrior: fix oops with malicious USB descriptors") Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.") Cc: stable <stable@vger.kernel.org> # 2.6.21 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: phy: isp1301: Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09usb: ohci-at91: Do not drop unhandled USB suspend control requestsJelle Martijn Kok
In patch 2e2aa1bc7eff90ecm, USB suspend and wakeup control requests are passed to SFR_OHCIICR register. If a processor does not have such a register, this hub control request will be dropped. If no such a SFR register is available, all USB suspend control requests will now be processed using ohci_hub_control() (like before patch 2e2aa1bc7eff90ecm.) Tested on an Atmel AT91SAM9G20 with an on-board TI TUSB2046B hub chip If the last USB device is unplugged from the USB hub, the hub goes into sleep and will not wakeup when an USB devices is inserted. Fixes: 2e2aa1bc7eff90ec ("usb: ohci-at91: Forcibly suspend ports while USB suspend") Signed-off-by: Jelle Martijn Kok <jmkok@youcom.nl> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Cc: Wenyou Yang <wenyou.yang@atmel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09KVM: arm64: Increase number of user memslots to 512Linu Cherian
Having only 32 memslots is a real constraint for the maximum number of PCI devices that can be assigned to a single guest. Assuming each PCI device/virtual function having two memory BAR regions, we could assign only 15 devices/virtual functions to a guest. Hence increase KVM_USER_MEM_SLOTS to 512 as done in other archs like powerpc. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Linu Cherian <linu.cherian@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-09KVM: arm/arm64: Remove KVM_PRIVATE_MEM_SLOTS definition that are unusedLinu Cherian
arm/arm64 architecture doesnt use private memslots, hence removing KVM_PRIVATE_MEM_SLOTS macro definition. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Linu Cherian <linu.cherian@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-09KVM: arm/arm64: Enable KVM_CAP_NR_MEMSLOTS on arm/arm64Linu Cherian
Return KVM_USER_MEM_SLOTS for userspace capability query on NR_MEMSLOTS. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Linu Cherian <linu.cherian@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-09KVM: Add documentation for KVM_CAP_NR_MEMSLOTSLinu Cherian
Add documentation for KVM_CAP_NR_MEMSLOTS capability. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Linu Cherian <linu.cherian@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-09Merge tag 'fixes-for-v4.11-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.11-rc2 dwc3 got a few fixes this time around: Fixed an old bug where a broken endpoint descriptor passed in via userspace through f_fs could prevent dwc3 from working because when calculating max bursts, we could overwrite top 16 bits of a register. Also fixed a bug on dwc3's ep_dequeue implementation which wasn't properly incrementing our TRB dequeue pointer. dwc3 on omap got two fixes: one for system suspend/resume and another added a missing break statement on dwc3_omap_set_mailbox(). Apart from these, we have a set of smaller fixes including memory leak in configfs, build warning fix in atmel udc and a revert of a broken patch that went in during the merge window
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-02-02 14:19:23 +0000