summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-29led: gpio: Sort include headers alphabeticallyXiubo Li
If the inlcude headers aren't sorted alphabetically, then the logical choice is to append new ones, however that creates a lot of potential for conflicts or duplicates because every change will then add new includes in the same location. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-24Merge tag 'mfd-hwmon-leds-watchdog-v3.18' into develBryan Wu
Immutable branch between MFD, HWMON, LEDs and Watchdog for v3.18
2014-09-24hwmon: (menf21bmc) Introduce MEN14F021P00 BMC HWMON driverAndreas Werner
Added driver to support the 14F021P00 BMC Hardware Monitoring. The BMC is a Board Management Controller including monitoring of the board voltages. Signed-off-by: Andreas Werner <andreas.werner@men.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-24leds: leds-menf21bmc: Introduce MEN 14F021P00 BMC LED driverAndreas Werner
Added driver to support the 14F021P00 BMC LEDs. The BMC is a Board Management Controller including four LEDs which can be switched on and off. Signed-off-by: Andreas Werner <andreas.werner@men.de> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-24watchdog: menf21bmc_wdt: Introduce MEN 14F021P00 BMC Watchdog driverAndreas Werner
Added driver to support the 14F021P00 BMC Watchdog. The BMC is a Board Management Controller including watchdog functionality. Signed-off-by: Andreas Werner <andreas.werner@men.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-24mfd: menf21bmc: Introduce MEN 14F021P00 BMC MFD Core driverAndreas Werner
The MEN 14F021P00 Board Management Controller provides an I2C interface to the host to access the feature implemented in the BMC. The BMC is a PIC Microntroller assembled on CPCI Card from MEN Mikroelektronik and on a few Box/Display Computer. Added MFD Core driver, supporting the I2C communication to the device. The MFD driver currently supports the following features: - Watchdog - LEDs - Hwmon (voltage monitoring) Signed-off-by: Andreas Werner <andreas.werner@men.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-12leds: Improve and export led_update_brightnessJacek Anaszewski
led_update_brightness helper function used to be exploited only locally in the led-class.c module, where its result was being passed to the brightness_show sysfs callback. With the introduction of v4l2-flash subdevice the same functionality becomes required for reading current brightness from a LED device. This patch adds checking of return value of the brightness_get callback and moves the led_update_brightness() function to the LED subsystem public API. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-11leds: trigger: gpio: fix warning in gpio trigger for gpios whose accessor ↵Lothar Waßmann
function may sleep When using a GPIO driver whose accessor functions may sleep (e.g. an I2C GPIO extender like PCA9554) the following warning is issued: WARNING: CPU: 0 PID: 665 at drivers/gpio/gpiolib.c:2274 gpiod_get_raw_value+0x3c/0x48() Modules linked in: CPU: 0 PID: 665 Comm: kworker/0:2 Not tainted 3.16.0-karo+ #115 Workqueue: events gpio_trig_work [<c00142cc>] (unwind_backtrace) from [<c00118f8>] (show_stack+0x10/0x14) [<c00118f8>] (show_stack) from [<c001bf10>] (warn_slowpath_common+0x64/0x84) [<c001bf10>] (warn_slowpath_common) from [<c001bf4c>] (warn_slowpath_null+0x1c/0x24) [<c001bf4c>] (warn_slowpath_null) from [<c020a1b8>] (gpiod_get_raw_value+0x3c/0x48) [<c020a1b8>] (gpiod_get_raw_value) from [<c02f68a0>] (gpio_trig_work+0x1c/0xb0) [<c02f68a0>] (gpio_trig_work) from [<c0030c1c>] (process_one_work+0x144/0x38c) [<c0030c1c>] (process_one_work) from [<c0030ef8>] (worker_thread+0x60/0x5cc) [<c0030ef8>] (worker_thread) from [<c0036dd4>] (kthread+0xb4/0xd0) [<c0036dd4>] (kthread) from [<c000f0f0>] (ret_from_fork+0x14/0x24) ---[ end trace cd51a1dad8b86c9c ]--- Fix this by using the _cansleep() variant of gpio_get_value(). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-11leds: lp3944: fix sparse warningJacek Anaszewski
Fix sparse warning appeared after changing brightness type in the leds.h from int to enum led_brightness. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-11leds: avoid using DEVICE_ATTR macro for max_brightness attributeJacek Anaszewski
Make definition of the brightness related sysfs attributes consistent. The modification entails change of the function name: led_max_brightness_show -> max_brightness_show Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-11leds: make brightness type consistent across whole subsystemJacek Anaszewski
Documentations states that brightness units type is enum led_brightness and this is the type used by the led API functions. Adjust the type of brightness variables in the struct led_classdev accordingly. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-11leds: Reorder include directivesJacek Anaszewski
Reorder include directives so that they are arranged in alphabetical order. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-09-07Linux 3.17-rc4v3.17-rc4Linus Torvalds
2014-09-07Documentation: new page link in SubmittingPatchesSudip Mukherjee
new link for - How to piss off a Linux kernel subsystem maintainer Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07Documentation: NFS/RDMA: Document separate Kconfig symbolsPaul Bolle
The NFS/RDMA Kconfig symbol was split into separate options for client and server in commit 2e8c12e1b765 ("xprtrdma: add separate Kconfig options for NFSoRDMA client and server support"). Update the documentation to reflect this split. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "J. Bruce Fields" <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07Documentation: misc-devices: Rename freefall.c from hpfall.c in lis2lv02dMasanari Iida
hpfall.c was renamed to freefall.c in 3.16, but this file still refer to hpfall.c instead of freefall.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07Documentation: i2c: rename variable "register" to "reg"Jose Manuel Alarcon Roldan
The example code provided with the i2c device interface documentation won't compile since it uses the reserved word "register" to name a variable. The compiler fails with this error message: error: expected identifier or '(' before '=' token __u8 register = 0x20; /* Device register to access */ ^ Rename the variable "register" to simply "reg" in the example code. Another couple of typos has been fixed as well. [Change "! =" to "!=".] Signed-off-by: Jose Alarcon Roldan <jose.alarcon.roldan@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07Documentation: seq_file: Document seq_open_private(), seq_release_private()Rob Jones
Despite the fact that these functions have been around for years, they are little used (only 15 uses in 13 files at the preseht time) even though many other files use work-arounds to achieve the same result. By documenting them, hopefully they will become more widely used. Signed-off-by: Rob Jones <rob.jones@codethink.co.uk> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-07Merge tag 'pm+acpi-3.17-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These are regression fixes (ACPI sysfs, ACPI video, suspend test), ACPI cpuidle deadlock fix, missing runtime validation of ACPI _DSD output, a fix and a new CPU ID for the RAPL driver, new blacklist entry for the ACPI EC driver and a couple of trivial cleanups (intel_pstate and generic PM domains). Specifics: - Fix for recently broken test_suspend= command line argument (Rafael Wysocki). - Fixes for regressions related to the ACPI video driver caused by switching the default to native backlight handling in 3.16 from Hans de Goede. - Fix for a sysfs attribute of ACPI device objects that returns stale values sometimes due to the fact that they are cached instead of executing the appropriate method (_SUN) every time (broken in 3.14). From Yasuaki Ishimatsu. - Fix for a deadlock between cpuidle_lock and cpu_hotplug.lock in the ACPI processor driver from Jiri Kosina. - Runtime output validation for the ACPI _DSD device configuration object missing from the support for it that has been introduced recently. From Mika Westerberg. - Fix for an unuseful and misleading RAPL (Running Average Power Limit) domain detection message in the RAPL driver from Jacob Pan. - New Intel Haswell CPU ID for the RAPL driver from Jason Baron. - New Clevo W350etq blacklist entry for the ACPI EC driver from Lan Tianyu. - Cleanup for the intel_pstate driver and the core generic PM domains code from Gabriele Mazzotta and Geert Uytterhoeven" * tag 'pm+acpi-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock ACPI / scan: not cache _SUN value in struct acpi_device_pnp cpufreq: intel_pstate: Remove unneeded variable powercap / RAPL: change domain detection message powercap / RAPL: add support for CPU model 0x3f PM / domains: Make generic_pm_domain.name const PM / sleep: Fix test_suspend= command line option ACPI / EC: Add msi quirk for Clevo W350etq ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PC ACPI / video: Add a disable_native_backlight quirk ACPI / video: Fix use_native_backlight selection logic ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package.
2014-09-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull filesystem fixes from Al Viro: "Several bugfixes (all of them -stable fodder). Alexey's one deals with double mutex_lock() in UFS (apparently, nobody has tried to test "ufs: sb mutex merge + mutex_destroy" on something like file creation/removal on ufs). Mine deal with two kinds of umount bugs, in umount propagation and in handling of automounted submounts, both resulting in bogus transient EBUSY from umount" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ufs: fix deadlocks introduced by sb mutex merge fix EBUSY on umount() from MNT_SHRINKABLE get rid of propagate_umount() mistakenly treating slaves as busy.
2014-09-07Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU fix from Ingo Molnar: "A boot hang fix for the offloaded callback RCU model (RCU_NOCB_CPU=y && (TREE_CPU=y || TREE_PREEMPT_RC)) in certain bootup scenarios" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Make nocb leader kthreads process pending callbacks after spawning
2014-09-07Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "Three fixlets from the timer departement: - Update the timekeeper before updating vsyscall and pvclock. This fixes the kvm-clock regression reported by Chris and Paolo. - Use the proper irq work interface from NMI. This fixes the regression reported by Catalin and Dave. - Clarify the compat_nanosleep error handling mechanism to avoid future confusion" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Update timekeeper before updating vsyscall and pvclock compat: nanosleep: Clarify error handling nohz: Restore NMI safe local irq work for local nohz kick
2014-09-07ufs: fix deadlocks introduced by sb mutex mergeAlexey Khoroshilov
Commit 0244756edc4b ("ufs: sb mutex merge + mutex_destroy") introduces deadlocks in ufs_new_inode() and ufs_free_inode(). Most callers of that functions acqure the mutex by themselves and ufs_{new,free}_inode() do that via lock_ufs(), i.e we have an unavoidable double lock. The patch proposes to resolve the issue by making sure that ufs_{new,free}_inode() are not called with the mutex held. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-09-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "A smattering of bug fixes across most architectures" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: powerpc/kvm/cma: Fix panic introduces by signed shift operation KVM: s390/mm: Fix guest storage key corruption in ptep_set_access_flags KVM: s390/mm: Fix storage key corruption during swapping arm/arm64: KVM: Complete WFI/WFE instructions ARM/ARM64: KVM: Nuke Hyp-mode tlbs before enabling MMU KVM: s390/mm: try a cow on read only pages for key ops KVM: s390: Fix user triggerable bug in dead code
2014-09-06Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Kevin Hilman: "Another round of fixes from arm-soc land, which are mostly DT fixes for: - OMAP: handful of DT fixes devices on newly supported hardware - davinci: fix 2nd EDMA channel - ux500: extend previous pinctrl fix to another board - at91: clock registration fixes, compatibility string precision And one more fix for event cleanup in drivers/bus/arm-ccn" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: bus: arm-ccn: Move event cleanup routine ARM: at91/dt: rm9200: fix usb clock definition ARM: at91: rm9200: fix clock registration ARM: at91/dt: sam9g20: set at91sam9g20 pllb driver ARM: dts: dra7-evm: Add vtt regulator support ARM: dts: dra7-evm: Fix spi1 mux documentation ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am4372: fix USB regs size ARM: dts: am437x-gp: switch i2c0 to 100KHz ARM: dts: dra7-evm: Fix 8th NAND partition's name ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency ARM: ux500: disable msp2 node on Snowball ARM: edma: Fix configuration parsing for SoCs with multiple eDMA3 CC ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clock
2014-09-06Merge tag 'xfs-for-linus-3.17-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs fixes from Dave Chinner: "The fixes all address recently discovered data corruption issues. The original Direct IO issue was discovered by Chris Mason @ Facebook on a production workload which mixed buffered reads with direct reads and writes IO to the same file. The fix for that exposed other issues with page invalidation (exposed by millions of fsx operations) failing due to dirty buffers beyond EOF. Finally, the collapse_range code could also cause problems due to racing writeback changing the extent map while it was being shifted around. The commits for that problem are simple mitigation fixes that prevent the problem from occuring. A more robust fix for 3.18 that addresses the underlying problem is currently being worked on by Brian. Summary of fixes: - a direct IO read/buffered read data corruption - the associated fallout from the DIO data corruption fix - collapse range bugs that are potential data corruption issues" * tag 'xfs-for-linus-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: trim eofblocks before collapse range xfs: xfs_file_collapse_range is delalloc challenged xfs: don't log inode unless extent shift makes extent modifications xfs: use ranged writeback and invalidation for direct IO xfs: don't zero partial page cache pages during O_DIRECT writes xfs: don't zero partial page cache pages during O_DIRECT writes xfs: don't dirty buffers beyond EOF
2014-09-06Merge tag 'for-linus-20140905' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull mtd fixes from Brian Norris: "Two trivial MTD updates for 3.17-rc4: - a tiny comment tweak, to kill a bunch of DocBook warnings added during the merge window - a small fixup to the OTP routines' error handling" * tag 'for-linus-20140905' of git://git.infradead.org/linux-mtd: mtd: nand: fix DocBook warnings on nand_sdr_timings doc mtd: cfi_cmdset_0002: check return code for get_chip()
2014-09-06timekeeping: Update timekeeper before updating vsyscall and pvclockThomas Gleixner
The update_walltime() code works on the shadow timekeeper to make the seqcount protected region as short as possible. But that update to the shadow timekeeper does not update all timekeeper fields because it's sufficient to do that once before it becomes life. One of these fields is tkr.base_mono. That stays stale in the shadow timekeeper unless an operation happens which copies the real timekeeper to the shadow. The update function is called after the update calls to vsyscall and pvclock. While not correct, it did not cause any problems because none of the invoked update functions used base_mono. commit cbcf2dd3b3d4 (x86: kvm: Make kvm_get_time_and_clockread() nanoseconds based) changed that in the kvm pvclock update function, so the stale mono_base value got used and caused kvm-clock to malfunction. Put the update where it belongs and fix the issue. Reported-by: Chris J Arges <chris.j.arges@canonical.com> Reported-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1409050000570.3333@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-09-06compat: nanosleep: Clarify error handlingThomas Gleixner
The error handling in compat_sys_nanosleep() is correct, but completely non obvious. Document it and restrict it to the -ERESTART_RESTARTBLOCK return value for clarity. Reported-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-09-05Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c bugfixes from Wolfram Sang: "I2C driver bugfixes for the 3.17 release. Details can be found in the commit messages, yet I think this is typical driver stuff" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: rcar: remove spinlock" i2c: at91: add bound checking on SMBus block length bytes i2c: rk3x: fix bug that cause transfer fails in master receive mode i2c: at91: Fix a race condition during signal handling in at91_do_twi_xfer. i2c: mv64xxx: continue probe when clock-frequency is missing i2c: rcar: fix MNR interrupt handling
2014-09-05Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesKevin Hilman
Merge "at91: fixes for 3.17 #1" from Nicols Ferre: First AT91 fixes batch for 3.17: - compatibility string precision - clock registration and USB DT fix for at91rm9200 * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dt: rm9200: fix usb clock definition ARM: at91: rm9200: fix clock registration ARM: at91/dt: sam9g20: set at91sam9g20 pllb driver Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-09-05bus: arm-ccn: Move event cleanup routinePawel Moll
The function cleaning up an initialized event was called from the "event_del" handler, instead of being used as the "destroy" callback. In case of events group allocation this caused NULL pointer dereference (as events are added and deleted multiple times then). Fixed now. Signed-off-by: Pawel Moll <mail@pawelmoll.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-09-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: "Wire up new syscalls getrandom and memfd_create" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Wire up memfd_create m68k: Wire up getrandom
2014-09-05ARM: at91/dt: rm9200: fix usb clock definitionAlexandre Belloni
The atmel,clk-divisors property is taking 4 divisors, if less are provided, the clock registration will fail. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-05ARM: at91: rm9200: fix clock registrationAlexandre Belloni
Actually register clocks from device tree when using the common clock framework. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> [nicolas.ferre@atmel.com: add at91 to function name] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-05ARM: at91/dt: sam9g20: set at91sam9g20 pllb driverGaël PORTAY
The at91sam9g20 SOC uses its own pllb implementation which is different from the one inherited from at91sam9260 SOC. Signed-off-by: Gaël PORTAY <gael.portay@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-05mm: memcontrol: revert use of root_mem_cgroup res_counterJohannes Weiner
Dave Hansen reports a massive scalability regression in an uncontained page fault benchmark with more than 30 concurrent threads, which he bisected down to 05b843012335 ("mm: memcontrol: use root_mem_cgroup res_counter") and pin-pointed on res_counter spinlock contention. That change relied on the per-cpu charge caches to mostly swallow the res_counter costs, but it's apparent that the caches don't scale yet. Revert memcg back to bypassing res_counters on the root level in order to restore performance for uncontained workloads. Reported-by: Dave Hansen <dave@sr71.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-05Export sync_filesystem() for modular ->remount_fs() useAnton Altaparmakov
This patch changes sync_filesystem() to be EXPORT_SYMBOL(). The reason this is needed is that starting with 3.15 kernel, due to Theodore Ts'o's commit 02b9984d6408 ("fs: push sync_filesystem() down to the file system's remount_fs()"), all file systems that have dirty data to be written out need to call sync_filesystem() from their ->remount_fs() method when remounting read-only. As this is now a generically required function rather than an internal only function it should be EXPORT_SYMBOL() so that all file systems can call it. Signed-off-by: Anton Altaparmakov <aia21@cantab.net> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-05Merge tag 'regulator-v3.17-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator documentation fixes from Mark Brown: "All the fixes people have found for the regulator API have been documentation fixes, avoiding warnings while building the kerneldoc, fixing some errors in one of the DT bindings documents and fixing some typos in the header" * tag 'regulator-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: fix kernel-doc warnings in header files regulator: Proofread documentation regulator: tps65090: Fix tps65090 typos in example
2014-09-05Merge tag 'omap-fixes-against-v3.17-rc3' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.17-rc3" from Tony Lindgren: Few fixes for omaps mostly for various devices to get them working properly on the new am437x and dra7 hardware for several devices such as I2C, NAND, DDR3 and USB. There's also a clock fix for omap3. And also included are two minor cosmetic fixes that are not stictly fixes for the new hardware support added recently to downgrade a GPMC warning into a debug statement, and fix the confusing comments for dra7-evm spi1 mux. Note that these are all .dts changes except for a GPMC change. * tag 'omap-fixes-against-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (255 commits) ARM: dts: dra7-evm: Add vtt regulator support ARM: dts: dra7-evm: Fix spi1 mux documentation ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am4372: fix USB regs size ARM: dts: am437x-gp: switch i2c0 to 100KHz ARM: dts: dra7-evm: Fix 8th NAND partition's name ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency Linux 3.17-rc3 ... Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-09-05Merge tag 'gpio-v3.17-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - some documentation sync - resource leak in the bt8xx driver - again fix the way varargs are used to handle the optional flags on the gpiod_* accessors. Now hopefully nailed the entire problem. * tag 'gpio-v3.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: move varargs hack outside #ifdef GPIOLIB gpio: bt8xx: fix release of managed resources Documentation: gpio: documentation for optional getters functions
2014-09-05Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: - i915 fixes: a few display regressions - vmwgfx: possible loop forever fix - nouveau: one userspace interface fix * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/core: don't leak oclass type bits to user drm/i915: Fix lock dropping in intel_tv_detect() drm/i915: handle G45/GM45 pulse detection connected state. drm/vmwgfx: Fix a potential infinite spin waiting for fifo idle drm/vmwgfx: Fix an incorrect OOM return value drm/i915: Remove bogus __init annotation from DMI callbacks drm/i915: don't warn if backlight unexpectedly enabled drm/i915: Move intel_ddi_set_vc_payload_alloc(false) to haswell_crtc_disable() drm/i915: fix plane/cursor handling when runtime suspended drm/i915: Ignore VBT backlight presence check on Acer C720 (4005U)
2014-09-05Merge branches 'pm-sleep', 'powercap', 'pm-domains' and 'pm-cpufreq'Rafael J. Wysocki
* pm-sleep: PM / sleep: Fix test_suspend= command line option * powercap: powercap / RAPL: change domain detection message powercap / RAPL: add support for CPU model 0x3f * pm-domains: PM / domains: Make generic_pm_domain.name const * pm-cpufreq: cpufreq: intel_pstate: Remove unneeded variable
2014-09-05Merge branches 'acpi-video' and 'acpi-ec'Rafael J. Wysocki
* acpi-video: ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PC ACPI / video: Add a disable_native_backlight quirk ACPI / video: Fix use_native_backlight selection logic * acpi-ec: ACPI / EC: Add msi quirk for Clevo W350etq
2014-09-05Merge branches 'acpica', 'acpi-processor' and 'acpi-scan'Rafael J. Wysocki
* acpica: ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package. * acpi-processor: ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock * acpi-scan: ACPI / scan: not cache _SUN value in struct acpi_device_pnp
2014-09-05Merge remote-tracking branches 'regulator/fix/doc' and ↵Mark Brown
'regulator/fix/tps65090' into regulator-linus
2014-09-05Merge branch 'linux-3.17' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes single fix for nouveau. * 'linux-3.17' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/core: don't leak oclass type bits to user
2014-09-05drm/nouveau/core: don't leak oclass type bits to userBen Skeggs
Fixes not being able to init fence subsystem when multiple boards are present. Reported-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-09-04Merge git://git.kvack.org/~bcrl/aio-fixesLinus Torvalds
Pull aio bugfixes from Ben LaHaise: "Two small fixes" * git://git.kvack.org/~bcrl/aio-fixes: aio: block exit_aio() until all context requests are completed aio: add missing smp_rmb() in read_events_ring
2014-09-04aio: block exit_aio() until all context requests are completedGu Zheng
It seems that exit_aio() also needs to wait for all iocbs to complete (like io_destroy), but we missed the wait step in current implemention, so fix it in the same way as we did in io_destroy. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Cc: stable@vger.kernel.org
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-02-15 00:38:56 +0000