Age | Commit message (Collapse) | Author |
|
Exynos850 is a bit different from SoCs already supported in WDT driver:
- AUTOMATIC_WDT_RESET_DISABLE register is removed, so its value is
always 0; .disable_auto_reset callback is not set for that reason
- MASK_WDT_RESET_REQUEST register is replaced with
CLUSTERx_NONCPU_IN_EN register; instead of masking (disabling) WDT
reset interrupt it's now enabled with the same value; .mask_reset
callback is reused for that functionality though
- To make WDT functional, WDT counter needs to be enabled in
CLUSTERx_NONCPU_OUT register; it's done using .enable_counter
callback
Also Exynos850 has two CPU clusters, each has its own dedicated WDT
instance. Different PMU registers and bits are used for each cluster. So
driver data is now modified in probe, adding needed info depending on
cluster index passed from device tree.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211121165647.26706-13-semen.protsenko@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This patch is based on commit 057b52b4b3d5 ("watchdog: da9062: make restart
handler atomic safe"), which uses the atomic transfer capability of the
i2c framework.
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211124080654.2601135-1-andrej.picej@norik.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
do_div() does a 64-by-32 division. Here the divisor is an unsigned long
which on some platforms is 64 bit wide. So use div64_ul instead of do_div
to avoid a possible truncation.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211125014924.46297-1-deng.changcheng@zte.com.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Now that we can utilize the BCM7038_WDT driver, remove that one which
was not converted to the watchdog APIs. There are a couple of notable
differences with how the bcm7038_wdt driver proceeds:
- bcm63xx_wdt would register with the ad-hoc BCM63xx hardware timer API,
but this would only be used in order to catch the interrupt *before* a
SoC reset and make the kernel "die"
- bcm6xx_wdt would register a software timer and kick it every second in
order to pet the watchdog, thus offering a two step watchdog process.
This is not something that is brought over to the bcm7038_wdt as it is
deemed unnecessary. If user-space cannot pet the watchdog, but a
kernel timer can, the system is still in a bad shape anyway.
bcm7038_wdt is simpler in its behavior and behaves as a standard
watchdog driver and is not making use of any specific platform APIs,
therefore making it more maintainable and extensible.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211112224636.395101-8-f.fainelli@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
In order to utilize the bcm7038_wdt.c driver which needs to know the
clock name to obtain, pass it via platform data using the
bcm7038_wdt_platform_data structure.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211112224636.395101-7-f.fainelli@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
In order to phase out bcm63xx_wdt and use bcm7038_wdt instead, introduce
a platform_device_id table that allows both names to be matched.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211112224636.395101-6-f.fainelli@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
CONFIG_BCM63XX denotes the legacy MIPS-based DSL SoCs which utilize the
same piece of hardware as a watchdog, make it possible to select that
driver for those platforms.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211112224636.395101-5-f.fainelli@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The BCM7038 watchdog driver needs to be able to obtain a specific clock
name on BCM63xx platforms which is the "periph" clock ticking at 50MHz.
make it possible to specify the clock name to obtain via platform data.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211112224636.395101-4-f.fainelli@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The BCM7038 watchdog binding is updated to include a "brcm,bcm6345-wdt"
compatible string which is the first instance of a DSL (BCM63xx) SoC
seeing the integration of such a watchdog timer block.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211112224636.395101-3-f.fainelli@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This helps validating DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211115055354.6089-1-zajec5@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Remove watchdog_stop_on_reboot()
The Meson platform still has some hardware drivers problems for some
configurations which can freeze devices on shutdown/reboot.
Remove watchdog_stop_on_reboot() to catch this situation and ensure that
the reboot happens anyway. Users who still want to stop the watchdog on
reboot can still do so using the watchdog.stop_on_reboot=1 module
parameter.
https://lore.kernel.org/linux-watchdog/20210729072308.1908904-1-art@khadas.com/T/#t
Signed-off-by: Artem Lapkin <art@khadas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211110022518.1676834-1-art@khadas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Some entries indent their help text with 1 tab + 1 space or 1 tab only
instead of 1 tab + 2 spaces. Add the missing spaces.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211111225852.3128201-7-luca@lucaceresoli.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The wdog on i.MX8ULP is derived from i.MX7ULP, it uses two compatible
strings, so update the compatible string for i.MX8ULP.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211112082930.3809351-7-peng.fan@oss.nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
'err' label in probe function is not really need, it just returns.
Remove it and replace all 'goto' statements with actual returns in
place.
No functional change here, just a cleanup patch.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211107202943.8859-12-semen.protsenko@linaro.org
[groeck: Fixed context conflicts]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Right now all devices supported in the driver have the single clock: it
acts simultaneously as a bus clock (providing register interface
clocking) and source clock (driving watchdog counter). Some newer Exynos
chips, like Exynos850, have two separate clocks for that. In that case
two clocks will be passed to the driver from the resource provider, e.g.
Device Tree. Provide necessary infrastructure to support that case:
- use source clock's rate for all timer related calculations
- use bus clock to gate/ungate the register interface
All devices that use the single clock are kept intact: if only one clock
is passed from Device Tree, it will be used for both purposes as before.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211107202943.8859-11-semen.protsenko@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Now that PMU enablement code was extended for new Exynos SoCs, it
doesn't look very cohesive and consistent anymore. Do a bit of renaming,
grouping and style changes, to make it look good again. While at it, add
quirks documentation as well.
No functional change, just a refactoring commit.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211123232613.22438-1-semen.protsenko@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
On new Exynos chips (e.g. Exynos850) new CLUSTERx_NONCPU_OUT register is
introduced, where CNT_EN_WDT bit must be enabled to make watchdog
counter running. Add corresponding quirk and proper infrastructure to
handle that register if the quirk is set.
This commit doesn't bring any functional change to existing devices, but
merely provides an infrastructure for upcoming chips support.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211107202943.8859-9-semen.protsenko@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
On new Exynos chips (like Exynos850) the MASK_WDT_RESET_REQUEST register
is replaced with CLUSTERx_NONCPU_INT_EN, and its mask bit value meaning
was reversed: for new register the bit value "1" means "Interrupt
enabled", while for MASK_WDT_RESET_REQUEST register "1" means "Mask the
interrupt" (i.e. "Interrupt disabled").
Introduce "mask_reset_inv" boolean field in driver data structure; when
that field is "true", mask register handling function will invert the
value before setting it to the register.
This commit doesn't bring any functional change to existing devices, but
merely provides an infrastructure for upcoming chips support.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211107202943.8859-8-semen.protsenko@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The s3c2410wdt_mask_and_disable_reset() function content is bound to be
changed further. Prepare it for upcoming changes by splitting into
separate "mask reset" and "disable reset" functions. But keep
s3c2410wdt_mask_and_disable_reset() function present as a facade.
This commit doesn't bring any functional change to existing devices, but
merely provides an infrastructure for upcoming chips support.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211107202943.8859-7-semen.protsenko@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
On new Exynos chips (e.g. Exynos850 and Exynos9) the
AUTOMATIC_WDT_RESET_DISABLE register was removed, and its value can be
thought of as "always 0x0". Add correspondig quirk bit, so that the
driver can omit accessing it if it's not present.
This commit doesn't bring any functional change to existing devices, but
merely provides an infrastructure for upcoming chips support.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211107202943.8859-6-semen.protsenko@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
When "tmr_atboot" module param is set, the watchdog is started in
driver's probe. In that case, also set WDOG_HW_RUNNING bit to let
watchdog core driver know it's running. This way watchdog core can kick
the watchdog for us (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED option is
enabled), until user space takes control.
WDOG_HW_RUNNING bit must be set before registering the watchdog. So the
"tmr_atboot" handling code is moved before watchdog registration, to
avoid performing the same check twice. This is also logical because
WDOG_HW_RUNNING bit makes WDT core expect actually running watchdog.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211107202943.8859-5-semen.protsenko@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Driver can't work properly if there no valid timeout was found in
s3c2410wdt_set_heartbeat(). Ideally, that function should be reworked in
a way that it's always able to find some valid timeout. As a temporary
solution let's for now just fail the driver probe in case the valid
timeout can't be found in s3c2410wdt_set_heartbeat() function.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211107202943.8859-4-semen.protsenko@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Exynos850 SoC has two CPU clusters:
- cluster 0: contains CPUs #0, #1, #2, #3
- cluster 1: contains CPUs #4, #5, #6, #7
Each cluster has its own dedicated watchdog timer. Those WDT instances
are controlled using different bits in PMU registers, new
"samsung,index" property is added to tell the driver which bits to use
for defined watchdog node.
Also on Exynos850 the peripheral clock and the source clock are two
different clocks. Provide a way to specify two clocks in watchdog device
tree node.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211107202943.8859-3-semen.protsenko@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Exynos7 watchdog driver is clearly indicating that its dts node must
define syscon phandle property. That was probably forgotten, so add it.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Fixes: 2b9366b66967 ("watchdog: s3c2410_wdt: Add support for Watchdog device on Exynos7")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211107202943.8859-2-semen.protsenko@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This adds watchdog support the Fintek F81966 Super I/O chip.
Testing was done on the Aaeon SSE-OPTI
Signed-off-by: AaeonIot <sophiehu@aaeon.com.tw>
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211117024052.2427539-1-acelan.kao@canonical.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Enable CONFIG_MEDIATEK_WATCHDOG when ARCH_MEDIATEK is enabled.
On some platforms (e.g. mt8183-pumpkin), watchdog is enabled by
bootloader, so kernel driver needs to be enabled to avoid watchdog
firing and causing reboot part way through kernel boot.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211103230354.915658-1-khilman@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Prevent potential undefined behavior due to shifting pkey constants
into the sign bit
- Move the EFI memory reservation code *after* the efi= cmdline parsing
has happened
- Revert two commits which turned out to be the wrong direction to
chase when accommodating early memblock reservations consolidation
and command line parameters parsing
* tag 'x86_urgent_for_v5.16_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pkey: Fix undefined behaviour with PKRU_WD_BIT
x86/boot: Move EFI range reservation after cmdline parsing
Revert "x86/boot: Pull up cmdline preparation and early param parsing"
Revert "x86/boot: Mark prepare_command_line() __init"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Prevent clang from reordering the reachable annotation in
an inline asm statement without inputs
- Fix objtool builds on non-glibc systems due to undefined
__always_inline
* tag 'objtool_urgent_for_v5.16_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
compiler.h: Fix annotation macro misplacement with Clang
uapi: Fix undefined __always_inline on non-glibc systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some hopefully final pin control fixes for the v5.16 kernel:
- Fix an out-of-bounds bug in the Mediatek driver
- Fix an init order bug in the Broadcom BCM2835 driver
- Fix a GPIO offset bug in the STM32 driver"
* tag 'pinctrl-v5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: stm32: consider the GPIO offset to expose all the GPIO lines
pinctrl: bcm2835: Change init order for gpio hogs
pinctrl: mediatek: fix global-out-of-bounds issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"A couple of lm90 driver fixes. None of them are critical, but they
should nevertheless be fixed"
* tag 'hwmon-for-v5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (lm90) Do not report 'busy' status bit as alarm
hwmom: (lm90) Fix citical alarm status for MAX6680/MAX6681
hwmon: (lm90) Drop critical attribute support for MAX6654
hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculations
hwmon: (lm90) Fix usage of CONFIG2 register in detect function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"A few small updates to drivers.
Of note we are now deferring probes of i8042 on some Asus devices as
the controller is not ready to respond to queries first time around
when the driver is compiled into the kernel"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elants_i2c - do not check Remark ID on eKTH3900/eKTH5312
Input: atmel_mxt_ts - fix double free in mxt_read_info_block
Input: goodix - fix memory leak in goodix_firmware_upload
Input: goodix - add id->model mapping for the "9111" model
Input: goodix - try not to touch the reset-pin on x86/ACPI devices
Input: i8042 - enable deferred probe quirk for ASUS UM325UA
Input: elantech - fix stack out of bound access in elantech_change_report_id()
Input: iqs626a - prohibit inlining of channel parsing functions
Input: i8042 - add deferred probe support
|
|
Merge misc fixes from Andrew Morton:
"9 patches.
Subsystems affected by this patch series: mm (kfence, mempolicy,
memory-failure, pagemap, pagealloc, damon, and memory-failure),
core-kernel, and MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()
mm/damon/dbgfs: protect targets destructions with kdamond_lock
mm/page_alloc: fix __alloc_size attribute for alloc_pages_exact_nid
mm: delete unsafe BUG from page_cache_add_speculative()
mm, hwpoison: fix condition in free hugetlb page path
MAINTAINERS: mark more list instances as moderated
kernel/crash_core: suppress unknown crashkernel parameter warning
mm: mempolicy: fix THP allocations escaping mempolicy restrictions
kfence: fix memory leak when cat kfence objects
|
|
Hulk Robot reported a panic in put_page_testzero() when testing
madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying
get_any_page(). This is because we keep MF_COUNT_INCREASED flag in
second try but the refcnt is not increased.
page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
------------[ cut here ]------------
kernel BUG at include/linux/mm.h:737!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: release_pages+0x53f/0x840
Call Trace:
free_pages_and_swap_cache+0x64/0x80
tlb_flush_mmu+0x6f/0x220
unmap_page_range+0xe6c/0x12c0
unmap_single_vma+0x90/0x170
unmap_vmas+0xc4/0x180
exit_mmap+0xde/0x3a0
mmput+0xa3/0x250
do_exit+0x564/0x1470
do_group_exit+0x3b/0x100
__do_sys_exit_group+0x13/0x20
__x64_sys_exit_group+0x16/0x20
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Modules linked in:
---[ end trace e99579b570fe0649 ]---
RIP: 0010:release_pages+0x53f/0x840
Link: https://lkml.kernel.org/r/20211221074908.3910286-1-liushixin2@huawei.com
Fixes: b94e02822deb ("mm,hwpoison: try to narrow window race for free pages")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
DAMON debugfs interface iterates current monitoring targets in
'dbgfs_target_ids_read()' while holding the corresponding
'kdamond_lock'. However, it also destructs the monitoring targets in
'dbgfs_before_terminate()' without holding the lock. This can result in
a use_after_free bug. This commit avoids the race by protecting the
destruction with the corresponding 'kdamond_lock'.
Link: https://lkml.kernel.org/r/20211221094447.2241-1-sj@kernel.org
Reported-by: Sangwoo Bae <sangwoob@amazon.com>
Fixes: 4bc05954d007 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.15.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The second parameter of alloc_pages_exact_nid is the one indicating the
size of memory pointed by the returned pointer.
Link: https://lkml.kernel.org/r/YbjEgwhn4bGblp//@coeus
Fixes: abd58f38dfb4 ("mm/page_alloc: add __alloc_size attributes for better bounds checking")
Signed-off-by: Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Levente Polyak <levente@leventepolyak.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It is not easily reproducible, but on 5.16-rc I have several times hit
the VM_BUG_ON_PAGE(PageTail(page), page) in
page_cache_add_speculative(): usually from filemap_get_read_batch() for
an ext4 read, yesterday from next_uptodate_page() from
filemap_map_pages() for a shmem fault.
That BUG used to be placed where page_ref_add_unless() had succeeded,
but now it is placed before folio_ref_add_unless() is attempted: that is
not safe, since it is only the acquired reference which makes the page
safe from racing THP collapse or split.
We could keep the BUG, checking PageTail only when
folio_ref_try_add_rcu() has succeeded; but I don't think it adds much
value - just delete it.
Link: https://lkml.kernel.org/r/8b98fc6f-3439-8614-c3f3-945c659a1aba@google.com
Fixes: 020853b6f5ea ("mm: Add folio_try_get_rcu()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When a memory error hits a tail page of a free hugepage,
__page_handle_poison() is expected to be called to isolate the error in
4kB unit, but it's not called due to the outdated if-condition in
memory_failure_hugetlb(). This loses the chance to isolate the error in
the finer unit, so it's not optimal. Drop the condition.
This "(p != head && TestSetPageHWPoison(head)" condition is based on the
old semantics of PageHWPoison on hugepage (where PG_hwpoison flag was
set on the subpage), so it's not necessray any more. By getting to set
PG_hwpoison on head page for hugepages, concurrent error events on
different subpages in a single hugepage can be prevented by
TestSetPageHWPoison(head) at the beginning of memory_failure_hugetlb().
So dropping the condition should not reopen the race window originally
mentioned in commit b985194c8c0a ("hwpoison, hugetlb:
lock_page/unlock_page does not match for handling a free hugepage")
[naoya.horiguchi@linux.dev: fix "HardwareCorrupted" counter]
Link: https://lkml.kernel.org/r/20211220084851.GA1460264@u2004
Link: https://lkml.kernel.org/r/20211210110208.879740-1-naoya.horiguchi@linux.dev
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Fei Luo <luofei@unicloud.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org> [5.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some lists that are moderated are not marked as moderated consistently,
so mark them all as moderated.
Link: https://lkml.kernel.org/r/20211209001330.18558-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Conor Culhane <conor.culhane@silvaco.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Jianjun Wang <jianjun.wang@mediatek.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When booting with crashkernel= on the kernel command line a warning
similar to
Kernel command line: ro console=ttyS0 crashkernel=256M
Unknown kernel command line parameters "crashkernel=256M", will be passed to user space.
is printed.
This comes from crashkernel= being parsed independent from the kernel
parameter handling mechanism. So the code in init/main.c doesn't know
that crashkernel= is a valid kernel parameter and prints this incorrect
warning.
Suppress the warning by adding a dummy early_param handler for
crashkernel=.
Link: https://lkml.kernel.org/r/20211208133443.6867-1-prudo@redhat.com
Fixes: 86d1919a4fb0 ("init: print out unknown kernel parameters")
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
alloc_pages_vma() may try to allocate THP page on the local NUMA node
first:
page = __alloc_pages_node(hpage_node,
gfp | __GFP_THISNODE | __GFP_NORETRY, order);
And if the allocation fails it retries allowing remote memory:
if (!page && (gfp & __GFP_DIRECT_RECLAIM))
page = __alloc_pages_node(hpage_node,
gfp, order);
However, this retry allocation completely ignores memory policy nodemask
allowing allocation to escape restrictions.
The first appearance of this bug seems to be the commit ac5b2c18911f
("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings").
The bug disappeared later in the commit 89c83fb539f9 ("mm, thp:
consolidate THP gfp handling into alloc_hugepage_direct_gfpmask") and
reappeared again in slightly different form in the commit 76e654cc91bb
("mm, page_alloc: allow hugepage fallback to remote nodes when
madvised")
Fix this by passing correct nodemask to the __alloc_pages() call.
The demonstration/reproducer of the problem:
$ mount -oremount,size=4G,huge=always /dev/shm/
$ echo always > /sys/kernel/mm/transparent_hugepage/defrag
$ cat mbind_thp.c
#include <unistd.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <assert.h>
#include <stdlib.h>
#include <stdio.h>
#include <numaif.h>
#define SIZE 2ULL << 30
int main(int argc, char **argv)
{
int fd;
unsigned long long i;
char *addr;
pid_t pid;
char buf[100];
unsigned long nodemask = 1;
fd = open("/dev/shm/test", O_RDWR|O_CREAT);
assert(fd > 0);
assert(ftruncate(fd, SIZE) == 0);
addr = mmap(NULL, SIZE, PROT_READ|PROT_WRITE,
MAP_SHARED, fd, 0);
assert(mbind(addr, SIZE, MPOL_BIND, &nodemask, 2, MPOL_MF_STRICT|MPOL_MF_MOVE)==0);
for (i = 0; i < SIZE; i+=4096) {
addr[i] = 1;
}
pid = getpid();
snprintf(buf, sizeof(buf), "grep shm /proc/%d/numa_maps", pid);
system(buf);
sleep(10000);
return 0;
}
$ gcc mbind_thp.c -o mbind_thp -lnuma
$ numactl -H
available: 2 nodes (0-1)
node 0 cpus: 0 2
node 0 size: 1918 MB
node 0 free: 1595 MB
node 1 cpus: 1 3
node 1 size: 2014 MB
node 1 free: 1731 MB
node distances:
node 0 1
0: 10 20
1: 20 10
$ rm -f /dev/shm/test; taskset -c 0 ./mbind_thp
7fd970a00000 bind:0 file=/dev/shm/test dirty=524288 active=0 N0=396800 N1=127488 kernelpagesize_kB=4
Link: https://lkml.kernel.org/r/20211208165343.22349-1-arbn@yandex-team.com
Fixes: ac5b2c18911f ("mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings")
Signed-off-by: Andrey Ryabinin <arbn@yandex-team.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Hulk robot reported a kmemleak problem:
unreferenced object 0xffff93d1d8cc02e8 (size 248):
comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s)
hex dump (first 32 bytes):
00 40 85 19 d4 93 ff ff 00 10 00 00 00 00 00 00 .@..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
seq_open+0x2a/0x80
full_proxy_open+0x167/0x1e0
do_dentry_open+0x1e1/0x3a0
path_openat+0x961/0xa20
do_filp_open+0xae/0x120
do_sys_openat2+0x216/0x2f0
do_sys_open+0x57/0x80
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff93d419854000 (size 4096):
comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s)
hex dump (first 32 bytes):
6b 66 65 6e 63 65 2d 23 32 35 30 3a 20 30 78 30 kfence-#250: 0x0
30 30 30 30 30 30 30 37 35 34 62 64 61 31 32 2d 0000000754bda12-
backtrace:
seq_read_iter+0x313/0x440
seq_read+0x14b/0x1a0
full_proxy_read+0x56/0x80
vfs_read+0xa5/0x1b0
ksys_read+0xa0/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
I find that we can easily reproduce this problem with the following
commands:
cat /sys/kernel/debug/kfence/objects
echo scan > /sys/kernel/debug/kmemleak
cat /sys/kernel/debug/kmemleak
The leaked memory is allocated in the stack below:
do_syscall_64
do_sys_open
do_dentry_open
full_proxy_open
seq_open ---> alloc seq_file
vfs_read
full_proxy_read
seq_read
seq_read_iter
traverse ---> alloc seq_buf
And it should have been released in the following process:
do_syscall_64
syscall_exit_to_user_mode
exit_to_user_mode_prepare
task_work_run
____fput
__fput
full_proxy_release ---> free here
However, the release function corresponding to file_operations is not
implemented in kfence. As a result, a memory leak occurs. Therefore,
the solution to this problem is to implement the corresponding release
function.
Link: https://lkml.kernel.org/r/20211206133628.2822545-1-libaokun1@huawei.com
Fixes: 0ce20dd84089 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull ARM fixes from Russell King:
- fix nommu after getting rid of mini-stack for ARMv7
- fix Thumb2 bug in iWMMXt exception handling
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9169/1: entry: fix Thumb2 bug in iWMMXt exception handling
ARM: 9160/1: NOMMU: Reload __secondary_data after PROCINFO_INITFUNC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Various bug-fixes"
* tag 'platform-drivers-x86-v5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel_pmc_core: fix memleak on registration failure
platform/x86/intel: Remove X86_PLATFORM_DRIVERS_INTEL
platform/x86: system76_acpi: Guard System76 EC specific functionality
platform/x86: apple-gmux: use resource_size() with res
platform/x86: amd-pmc: only use callbacks for suspend
platform/mellanox: mlxbf-pmc: Fix an IS_ERR() vs NULL bug in mlxbf_pmc_map_counters
|
|
Pull ksmbd fixes from Steve French:
"Three ksmbd fixes, all for stable as well.
Two fix potential unitialized memory and one fixes a security problem
where encryption is unitentionally disabled from some clients"
* tag '5.16-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: disable SMB2_GLOBAL_CAP_ENCRYPTION for SMB 3.1.1
ksmbd: fix uninitialized symbol 'pntsd_size'
ksmbd: fix error code in ndr_read_int32()
|
|
Pull drm fixes from Dave Airlie:
"Happy Xmas. Nothing major, one mediatek and a couple of i915 locking
fixes. There might be a few stragglers over next week or so but I
don't expect much before next release.
mediatek:
- NULL pointer check
i915:
- guc submission locking fixes"
* tag 'drm-fixes-2021-12-24' of git://anongit.freedesktop.org/drm/drm:
drm/i915/guc: Only assign guc_id.id when stealing guc_id
drm/i915/guc: Use correct context lock when callig clr_context_registered
drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf
|
|
Pull io_uring fix from Jens Axboe:
"Single fix for not clearing kiocb->ki_pos back to 0 for a stream,
destined for stable as well"
* tag 'io_uring-5.16-2021-12-23' of git://git.kernel.dk/linux-block:
io_uring: zero iocb->ki_pos for stream file types
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ucount fix from Eric Biederman:
"This fixes a silly logic bug in the ucount rlimits code, where it was
comparing against the wrong limit"
* 'ucount-rlimit-fixes-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Fix rlimit max values check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- revert "tipc: use consistent GFP flags"
Previous releases - regressions:
- igb: fix deadlock caused by taking RTNL in runtime resume path
- accept UFOv6 packages in virtio_net_hdr_to_skb
- netfilter: fix regression in looped (broad|multi)cast's MAC
handling
- bridge: fix ioctl old_deviceless bridge argument
- ice: xsk: do not clear status_error0 for ntu + nb_buffs descriptor,
avoid stalls when multiple sockets use an interface
Previous releases - always broken:
- inet: fully convert sk->sk_rx_dst to RCU rules
- veth: ensure skb entering GRO are not cloned
- sched: fix zone matching for invalid conntrack state
- bonding: fix ad_actor_system option setting to default
- nf_tables: fix use-after-free in nft_set_catchall_destroy()
- lantiq_xrx200: increase buffer reservation to avoid mem corruption
- ice: xsk: avoid leaking app buffers during clean up
- tun: avoid double free in tun_free_netdev"
* tag 'net-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5M
r8152: sync ocp base
r8152: fix the force speed doesn't work for RTL8156
net: bridge: fix ioctl old_deviceless bridge argument
net: stmmac: ptp: fix potentially overflowing expression
net: dsa: tag_ocelot: use traffic class to map priority on injected header
veth: ensure skb entering GRO are not cloned.
asix: fix wrong return value in asix_check_host_enable()
asix: fix uninit-value in asix_mdio_read()
sfc: falcon: Check null pointer of rx_queue->page_ring
sfc: Check null pointer of rx_queue->page_ring
net: ks8851: Check for error irq
drivers: net: smc911x: Check for error irq
fjes: Check for error irq
bonding: fix ad_actor_system option setting to default
igb: fix deadlock caused by taking RTNL in RPM resume path
gve: Correct order of processing device options
net: skip virtio_net_hdr_set_proto if protocol already set
net: accept UFOv6 packages in virtio_net_hdr_to_skb
docs: networking: replace skb_hwtstamp_tx with skb_tstamp_tx
...
|
|
In case device registration fails during module initialisation, the
platform device structure needs to be freed using platform_device_put()
to properly free all resources (e.g. the device name).
Fixes: 938835aa903a ("platform/x86: intel_pmc_core: do not create a static struct device")
Cc: stable@vger.kernel.org # 5.9
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211222105023.6205-1-johan@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|