summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-24mac80211: improve mpath debuggingJavier Cardona
make hwmp_dbg print the relevant sdata->name by default and improve formatting. Also add mpath_dbg macro for debugging of mesh path operations. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-23b43: HT-PHY: allow writing longer tables with a single callRafał Miłecki
Sometimes we need to write table which is 2-10 elements long. It's easier to create such a function instead of defining array every time. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: HT-PHY: init: add missing small-tables writesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22rtlwifi: add module parameter to set global debug levelStefan Assmann
No need to recompile the module anymore to set the debug level. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: HT-PHY: init: add some AFE (Analog Frontend) operationRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: HT-PHY: init: add missing PHY mask/set opsRafał Miłecki
MMIO hacks were used to trick ndis&wl. For example following: phy_read(0x0280) -> 0xffff phy_write(0x0280) <- 0xff3e *** phy_read(0x0280) -> 0x0000 phy_write(0x0280) <- 0x003e was translated to mask 0xff00 and set 0x3e. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: HT-PHY: init: init BPHY and upload 0x1a tableRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: HT-PHY: init: copy tables and reset CCARafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: HT-PHY: init: implement few simple PHY writesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: HT-PHY: init: zero EXTG registersRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mwl8k: Traffic to clients gets affected when one client leaves a cyrpto bssNishant Sarmukadam
When a client disassociates from a crypto enabled bss, data traffic to other clients connected to the bss is stalled. This was due to a boolean variable used to keep track if HW crypto is enabled i.e. if set key has been called to add a key. This flag was being reset every time delete key was called e.g when a station leaves the bss. Once the flag is reset, rx status flags were not being set for connected clients which disrupts traffic to these clients. Fix this issue by not resetting the flag since we do not need to reset this flag during the life time of the bss. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mac80211: update mesh path selection frame formatThomas Pedersen
Make mesh path selection frames Mesh Action category, remove outdated Mesh Path Selection category and defines, use updated reason codes, add mesh_action_is_path_sel for readability, and update/correct path selection IEs. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22ieee80211: add mesh action codesThomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mac80211: update mesh peering frame formatThomas Pedersen
This patch updates the mesh peering frames to the format specified in the recently ratified 802.11s standard. Several changes took place to make this happen: - Change RX path to handle new self-protected frames - Add new Peering management IE - Remove old Peer Link IE - Remove old plink_action field in ieee80211_mgmt header These changes by themselves would either break peering, or work by coincidence, so squash them all into this patch. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mac80211: update mesh peering frame codesThomas Pedersen
Have the mesh peering frames use the self-protected action and reason codes specified in 802.11s and defined in ieee80211.h. Remove the local enums. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22ieee80211: introduce Self Protected Action codesThomas Pedersen
802.11s introduces a new action frame category, add action codes as well as an entry in ieee80211_mgmt. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mac80211: fix mesh beacon formatThomas Pedersen
Correct ordering of IEs in the mesh beacon while removing unneeded IEs from mesh peering frames. Set privacy bit in capability info if security is enabled. Add utility functions to aid in construction of IEs and reduce code duplication. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: make forcing clock common (HT-PHY also uses that)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: include HT-PHY in some common codeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22bcma: implement BCM4331 workaround for external PA linesRafał Miłecki
We need to disable ext. PA lines for reading SPROM. It's disabled by default, but this patch allows using bcma after loading wl, which leaves workaround enabled. Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: support new RX header, noticed to be used in 598.314+ fwRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: support new TX header, noticed to be used by 598.314+ fwRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: use enum for firmware header formatRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: rename TX header formatsRafał Miłecki
Replace "old" and "new" with number of the first firmware known to use the given format. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mac80211: Tear down BA session on BAR tx failureHelmut Schaa
As described at [1] some STAs (i.e. Intel 5100 Windows) can end up correctly BlockAcking incoming frames without delivering them to user space if a AMPDU subframe got lost and we don't flush the receipients reorder buffer with a BlockAckReq. This in turn results in stuck connections. According to 802.11n-2009 it is not necessary to send a BAR to flush the recepients RX reorder buffer but we still do that to be polite. However, assume the following frame exchange: AP -> STA, AMPDU (failed) AP -> STA, BAR (failed) The client in question then ends up in the same situation and won't deliver frames to userspace anymore since we weren't able to flush its reorder buffer. This is not a hypothetical situation but I was able to observe this exact behavior during a stress test between a rt2800pci AP and a Intel 5100 Windows client. In order to work around this issue just tear down the BA session as soon as a BAR failed to be TX'ed. [1] http://comments.gmane.org/gmane.linux.kernel.wireless.general/66867 Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22wireless: Introduce defines for BAR TID_INFO & MULTI_TID fieldsHelmut Schaa
While at it also fix the indention of the other IEEE80211_BAR_CTRL_ defines. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: reload phy and bss settings after core restartsFelix Fietkau
b43_op_config and b43_op_bss_info_changed apply many settings by directly writing to hardware registers. These settings are lost as soon as the core is restarted and the initvals are reloaded. This was discovered because restarting hostapd led to the beacon interval getting set to ~33s (see https://dev.openwrt.org/ticket/8033 for more information). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22ath9k: do btcoex ASPM disabling at initialization timeStanislaw Gruszka
Disable ASPM in pci ->probe on upstream (device) and downstream (PCIe port) component. According to e1000e driver authors this is required. I did not find that requirement in PCIe spec, but it seems to be logical for me. This need to be fixed for CONFIG_PCIEASPM, that will be done later ... Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22ath9k: merge common ->config_pci_powersave() checksStanislaw Gruszka
Move common checks into wrapper function. Since ASPM can be only enabled on PCIe devices ->is_pciexpress check is unneeded. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22ath9k: remove ->config_pci_powersave() redundant argumentStanislaw Gruszka
We always call ->config_pci_powersave() with both restore and power_off arguments equal to 0 or both equal to 1, so merge them into one argument. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-13staging: remove ath6klKalle Valo
ath6kl is now in drivers/net/wireless/ath so the staging driver is not supported anymore and should be removed. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Greg KH <gregkh@suse.de> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-12mwifiex: use cfg80211 dynamic scan table and cfg80211_get_bss APIAmitkumar Karwar
Instead of maintaining static scan table in driver, scan list is sent to cfg80211 stack (after parsing each scan command response). In assoc handler (for infra and ibss network) requested BSS information is retrieved using cfg80211_get_bss() API. With the changes above some redundant code are removed. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-12ath9k: avoid sending a-mpdu packets to sleeping stationsFelix Fietkau
If the driver gets a tx status report for an A-MPDU sent to a station that just went to sleep, that leaves a race condition where this tx status can trigger another A-MPDU transmission. To fix this, check if the station is sleeping before queueing the tid. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-12nl80211/cfg80211: Add extra IE configuration to AP mode setupJouni Malinen
The NL80211_CMD_NEW_BEACON command is, in practice, requesting AP mode operations to be started. Add new attributes to provide extra IEs (e.g., WPS IE, P2P IE) for drivers that build Beacon, Probe Response, and (Re)Association Response frames internally (likely in firmware). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-12nl80211/cfg80211: Add crypto settings into NEW_BEACONJouni Malinen
This removes need from drivers to parse the beacon tail/head data to figure out what crypto settings are to be used in AP mode in case the Beacon and Probe Response frames are fully constructed in the driver/firmware. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-12nl80211/cfg80211: Allow SSID to be specified in new beacon commandJouni Malinen
This makes it easier for drivers that generate Beacon and Probe Response frames internally (in firmware most likely) in AP mode. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-12cfg80211/mac80211: move information element parsing logic to cfg80211Yogesh Ashok Powar
Moving the parsing logic for retrieving the information elements stored in management frames, e.g. beacons or probe responses, and making it available to other cfg80211 drivers. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-12ath9k: remove eeprom txgain override for minor version < 19Marek Lindner
ath9k_hw_4k_get_eeprom() overrides the eeprom value for txgain if the minor version is not 19 or above with a value of 0. ar9002_hw_init_mode_gain_regs() relies on this information to determine whether this is a high power wifi card or not. The override caused the driver to always use the 'normal' power tables even for high power devices if their minor version was not high enough. Thus leading to reduced power output. This isn't needed for the AR9285; the check originated with the AR9280 setup code which requires the EEPROM version check. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Adrian Chadd <adrian@freebsd.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-11nl80211/cfg80211: Make addition of new sinfo fields saferJouni Malinen
Add a comment pointing out the use of enum station_info_flags for all new struct station_info fields. In addition, memset the sinfo buffer to zero before use on all paths in the current tree to avoid leaving uninitialized pointers in the data. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-11cfg80211: fix a crash in nl80211_send_stationFelix Fietkau
mac80211 leaves sinfo->assoc_req_ies uninitialized, causing a random pointer memory access in nl80211_send_station. Instead of checking if the pointer is null, use sinfo->filled, like the rest of the fields. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-10ath9k: remove obselete commentsMohammed Shafi Shajakhan
the comments are obselete as the virtual wiphy support was removed from the driver Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-10ath9k: optimize rate control statisticsMohammed Shafi Shajakhan
for the ease of debugging, we display only the rate control statistics for currently operating mode and bandwidth Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: "Balasubramanian, senthilkumar" <senthilb@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-10mac80211: fix erroneous clearing of MESH_PATH_SN_VALID flagJavier Cardona
When a PREQ or PREP is received from an intermediate node, it contains useful information for path selection but it doesn't include the originator's sequence number. Therefore, when updating the mesh path to that intermediate node, we should not set the MESH_PATH_SN_VALID flag. BUT, if the flag is set, it should not be unset as we might have received a valid sequence number for that intermediate node in the past. This issue was reported, fixed and tested by Ya Bo (游波) and Pedro Larbig (ASPj). Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-10ath9k_htc: minor clean-upMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-10mac80211: clear sta.drv_priv on reconfigurationEliad Peller
drivers might assume sta.drv_priv is clear while the sta is added, so clear it on reconfinguration. Signed-off-by: Eliad Peller <eliad@wizery.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-10cfg80211/nl80211: Send AssocReq IEs to user space in AP modeJouni Malinen
When user space SME/MLME (e.g., hostapd) is not used in AP mode, the IEs from the (Re)Association Request frame that was processed in firmware need to be made available for user space (e.g., RSN IE for hostapd). Allow this to be done with cfg80211_new_sta(). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-10nl80211: Indicate driver-based offchannel TX on mgmt_tx_cancel_waitJouni Malinen
Drivers that support frame transmission with mgmt_tx() may not support driver-based offchannel TX. Use mgmt_tx_cancel_wait instead of mgmt_tx when figuring out whether to indicate support for this with NL80211_ATTR_OFFCHANNEL_TX_OK. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-10mac80211_hwsim: Fix RX status reporting for HTJouni Malinen
RX_FLAG_HT must be included when reporting MCS rates. Without this, mac80211 ended up dropping any frame sent at MCS index 12 or higher and that resulted in oddly random looking errors in mac80211_hwsim tests. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-10Merge branch 'for-linville' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath6kl
2011-08-10ath6kl: fix function name conflicts with ath9kKalle Valo
Stephen reported that compilation fails if both ath6kl and ath9k are compiled in: drivers/net/wireless/ath/ath6kl/built-in.o: In function `htc_start': (.opd+0x600): multiple definition of `htc_start' drivers/net/wireless/ath/ath9k/built-in.o:(.opd+0x3e40): first defined here drivers/net/wireless/ath/ath6kl/built-in.o: In function `.htc_stop': (.text+0x7b40): multiple definition of `.htc_stop' drivers/net/wireless/ath/ath9k/built-in.o:(.text+0x67b34): first defined he= re drivers/net/wireless/ath/ath6kl/built-in.o: In function `.htc_start': (.text+0x7d18): multiple definition of `.htc_start' drivers/net/wireless/ath/ath9k/built-in.o:(.text+0x67ba0): first defined he= re drivers/net/wireless/ath/ath6kl/built-in.o: In function `htc_stop': (.opd+0x5e8): multiple definition of `htc_stop' drivers/net/wireless/ath/ath9k/built-in.o:(.opd+0x3e28): first defined here To fix this add ath6kl prefix to all public functions in htc.c. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-03-01 00:25:18 +0000