| Age | Commit message (Collapse) | Author |
|---|
|
With DEBUG_PAGEALLOC on, the following triggers.
BUG: unable to handle page fault for address: ffff88859367c000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 3001067 P4D 3001067 PUD 406d3a8067 PMD 406d30c067 PTE 800ffffa6c983060
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
CPU: 38 PID: 3110657 Comm: python2.7
RIP: 0010:fuse_readdir+0x88f/0xe7a [fuse]
Code: 49 8b 4d 08 49 39 4e 60 0f 84 44 04 00 00 48 8b 43 08 43 8d 1c 3c 4d 01 7e 68 49 89 dc 48 03 5c 24 38 49 89 46 60 8b 44 24 30 <8b> 4b 10 44 29 e0 48 89 ca 48 83 c1 1f 48 83 e1 f8 83 f8 17 49 89
RSP: 0018:ffffc90035edbde0 EFLAGS: 00010286
RAX: 0000000000001000 RBX: ffff88859367bff0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88859367bfed RDI: 0000000000920907
RBP: ffffc90035edbe90 R08: 000000000000014b R09: 0000000000000004
R10: ffff88859367b000 R11: 0000000000000000 R12: 0000000000000ff0
R13: ffffc90035edbee0 R14: ffff889fb8546180 R15: 0000000000000020
FS: 00007f80b5f4a740(0000) GS:ffff889fffa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88859367c000 CR3: 0000001c170c2001 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
iterate_dir+0x122/0x180
__x64_sys_getdents+0xa6/0x140
do_syscall_64+0x42/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
It's in fuse_parse_cache(). %rbx (ffff88859367bff0) is fuse_dirent
pointer - addr + offset. FUSE_DIRENT_SIZE() is trying to dereference
namelen off of it but that derefs into the next page which is disabled
by pagealloc debug causing a PF.
This is caused by dirent->namelen being accessed before ensuring that
there's enough bytes in the page for the dirent. Fix it by pushing
down reclen calculation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5d7bc7e8680c ("fuse: allow using readdir cache")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This function has been made static, which now causes a compile-time
warning:
WARNING: "fuse_put_request" [vmlinux] is a static EXPORT_SYMBOL_GPL
Remove the unneeded export.
Fixes: 66abc3599c3c ("fuse: unexport request ops")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
account per-file, dentry, and inode data
blockdev/superblock and temporary per-request data was left alone, as
this usually isn't accounted
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Implements the optimization noted in commit f75fdf22b0a8 ("fuse: don't
use ->d_time"), as the additional memory can be significant. (In
particular, on SLAB configurations this 8-byte alloc becomes 32 bytes).
Per-dentry, this can consume significant memory.
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
unlock_page() was missing in case of an already in-flight write against the
same page.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Fixes: ff17be086477 ("fuse: writepage: skip already in flight")
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
virtio fs tunnels fuse over a virtio channel. One issue is two sides might
be speaking different endian-ness. To detects this, host side looks at the
opcode value in the FUSE_INIT command. Works fine at the moment but might
fail if a future version of fuse will use such an opcode for
initialization. Let's reserve this opcode so we remember and don't do
this.
Same for CUSE_INIT.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
virtio-fs does not support aborting requests which are being
processed. That is requests which have been sent to fuse daemon on host.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Allow virtio-fs to also send DESTROY request.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Don't hold onto dentry in lru list if need to re-lookup it anyway at next
access. Only do this if explicitly enabled, otherwise it could result in
performance regression.
More advanced version of this patch would periodically flush out dentries
from the lru which have gone stale.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
As of now fuse_dev_alloc() both allocates a fuse device and installs it in
fuse_conn list. fuse_dev_alloc() can fail if fuse_device allocation fails.
virtio-fs needs to initialize multiple fuse devices (one per virtio queue).
It initializes one fuse device as part of call to fuse_fill_super_common()
and rest of the devices are allocated and installed after that.
But, we can't afford to fail after calling fuse_fill_super_common() as we
don't have a way to undo all the actions done by fuse_fill_super_common().
So to avoid failures after the call to fuse_fill_super_common(),
pre-allocate all fuse devices early and install them into fuse connection
later.
This patch provides two separate helpers for fuse device allocation and
fuse device installation in fuse_conn.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The /dev/fuse device uses fiq->waitq and fasync to signal that requests are
available. These mechanisms do not apply to virtio-fs. This patch
introduces callbacks so alternative behavior can be used.
Note that queue_interrupt() changes along these lines:
spin_lock(&fiq->waitq.lock);
wake_up_locked(&fiq->waitq);
+ kill_fasync(&fiq->fasync, SIGIO, POLL_IN);
spin_unlock(&fiq->waitq.lock);
- kill_fasync(&fiq->fasync, SIGIO, POLL_IN);
Since queue_request() and queue_forget() also call kill_fasync() inside
the spinlock this should be safe.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
fuse_fill_super() includes code to process the fd= option and link the
struct fuse_dev to the fd's struct file. In virtio-fs there is no file
descriptor because /dev/fuse is not used.
This patch extracts fuse_fill_super_common() so that both classic fuse and
virtio-fs can share the code to initialize a mount.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
File systems like virtio-fs need to do not have to play directly with
forget list data structures. There is a helper function use that instead.
Rename dequeue_forget() to fuse_dequeue_forget() and export it so that
stacked filesystems can use it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
virtio-fs will need unique IDs for FORGET requests from outside
fs/fuse/dev.c. Make the symbol visible.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This will be used by virtio-fs to send init request to fuse server after
initialization of virt queues.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
virtio-fs will need to query the length of fuse_arg lists. Make the symbol
visible.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
virtio-fs will need to complete requests from outside fs/fuse/dev.c. Make
the symbol visible.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The size of struct fuse_req was reduced from 392B to 144B on a non-debug
config, thus the sanitize_global_limit() helper was setting a larger
default limit. This doesn't really reflect reduction in the memory used by
requests, since the fields removed from fuse_req were added to fuse_args
derived structs; e.g. sizeof(struct fuse_writepages_args) is 248B, thus
resulting in slightly more memory being used for writepage requests
overalll (due to using 256B slabs).
Make the calculatation ignore the size of fuse_req and use the old 392B
value.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The page array pointers are also duplicated across fuse_args_pages and
fuse_req. Get rid of the fuse_req ones.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
No need to duplicate the argument arrays in fuse_req, so just dereference
req->args instead of copying to the fuse_req internal ones.
This allows further cleanup of the fuse_req structure.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Get rid of request specific fields in fuse_req that are not used anymore.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Page arrays are not allocated together with the request anymore. Get rid
of the dead code
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
All requests are now sent with one of the fuse_simple_... helpers. Get rid
of the old api from the fuse internal header.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Rename fuse_request_send_notify_reply() to fuse_simple_notify_reply() and
convert to passing fuse_args instead of fuse_req.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Since we cannot reserve the request structure up-front, make sure that the
request allocation doesn't fail using __GFP_NOFAIL.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This is a straightforward conversion.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Bypass the fc->initialized check by setting the force flag.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Derive fuse_writepage_args from fuse_io_args.
Sending the request is tricky since it was done with fi->lock held, hence
we must either use atomic allocation or release the lock. Both are
possible so try atomic first and if it fails, release the lock and do the
regular allocation with GFP_NOFS and __GFP_NOFAIL. Both flags are
necessary for correct operation.
Move the page realloc function from dev.c to file.c and convert to using
fuse_writepage_args.
The last caller of fuse_write_fill() is gone, so get rid of it.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The old fuse_read_fill() helper can be deleted, now that the last user is
gone.
The fuse_io_args struct is moved to fuse_i.h so it can be shared between
readdir/read code.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Need to extend fuse_io_args with 'attr_ver' and 'ff' members, that take the
functionality of the same named members in fuse_req.
fuse_short_read() can now take struct fuse_args_pages.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Change of semantics in fuse_async_req_send/fuse_send_(read|write): these
can now return error, in which case the 'end' callback isn't called, so the
fuse_io_args object needs to be freed.
Added verification that the return value is sane (less than or equal to the
requested read/write size).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Create a helper named fuse_simple_background() that is similar to
fuse_simple_request(). Unlike the latter, it returns immediately and calls
the supplied 'end' callback when the reply is received.
The supplied 'args' pointer is stored in 'fuse_req' which allows the
callback to interpret the output arguments decoded from the reply.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Extract a fuse_write_flags() helper that converts ki_flags relevant write
to open flags.
The other parts of fuse_send_write() aren't used in the
fuse_perform_write() case.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Derive fuse_io_args from struct fuse_args_pages. This will be used for
both synchronous and asynchronous read/write requests.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This will allow the use of this function when converting to the simple api
(which doesn't use fuse_req).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
fuse_simple_request() is converted to return length of last (instead of
single) out arg, since FUSE_IOCTL_OUT has two out args, the second of which
is variable length.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
fuse_req_pages_alloc() is moved to file.c, since its internal use by the
device code will eventually be removed.
Rename to fuse_pages_alloc() to signify that it's not only usable for
fuse_req page array.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Also turn BUG_ON into gracefully recovered WARN_ON.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Derive fuse_args_pages from fuse_args. This is used to handle requests
which use pages for input or output. The related flags are added to
fuse_args.
New FR_ALLOC_PAGES flags is added to indicate whether the page arrays in
fuse_req need to be freed by fuse_put_request() or not.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
We can use the "force" flag to make sure the DESTROY request is always sent
to userspace. So no need to keep it allocated during the lifetime of the
filesystem.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
In some cases it makes no sense to set pid/uid/gid fields in the request
header. Allow fuse_simple_background() to omit these. This is only
required in the "force" case, so for now just WARN if set otherwise.
Fold fuse_get_req_nofail_nopages() into its only caller. Comment is
obsolete anyway.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Move this function to the readdir.c where its only caller resides.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This will be used by fuse_force_forget().
We can expand fuse_request_send() into fuse_simple_request(). The
FR_WAITING bit has already been set, no need to check.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Add 'force' to fuse_args and use fuse_get_req_nofail_nopages() to allocate
the request in that case.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Instead of complex games with a reserved request, just use __GFP_NOFAIL.
Both calers (flush, readdir) guarantee that connection was already
initialized, so no need to wait for fc->initialized.
Also remove unneeded clearing of FR_BACKGROUND flag.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This makes the structure better packed.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
...to make future expansion simpler. The hiearachical structure is a
historical thing that does not serve any practical purpose.
The generated code is excatly the same before and after the patch.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When IOCB_CMD_POLL is used on the FUSE device, aio_poll() disables IRQs
and takes kioctx::ctx_lock, then fuse_iqueue::waitq.lock.
This may have to wait for fuse_iqueue::waitq.lock to be released by one
of many places that take it with IRQs enabled. Since the IRQ handler
may take kioctx::ctx_lock, lockdep reports that a deadlock is possible.
Fix it by protecting the state of struct fuse_iqueue with a separate
spinlock, and only accessing fuse_iqueue::waitq using the versions of
the waitqueue functions which do IRQ-safe locking internally.
Reproducer:
#include <fcntl.h>
#include <stdio.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <unistd.h>
#include <linux/aio_abi.h>
int main()
{
char opts[128];
int fd = open("/dev/fuse", O_RDWR);
aio_context_t ctx = 0;
struct iocb cb = { .aio_lio_opcode = IOCB_CMD_POLL, .aio_fildes = fd };
struct iocb *cbp = &cb;
sprintf(opts, "fd=%d,rootmode=040000,user_id=0,group_id=0", fd);
mkdir("mnt", 0700);
mount("foo", "mnt", "fuse", 0, opts);
syscall(__NR_io_setup, 1, &ctx);
syscall(__NR_io_submit, ctx, 1, &cbp);
}
Beginning of lockdep output:
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
5.3.0-rc5 #9 Not tainted
-----------------------------------------------------
syz_fuse/135 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
000000003590ceda (&fiq->waitq){+.+.}, at: spin_lock include/linux/spinlock.h:338 [inline]
000000003590ceda (&fiq->waitq){+.+.}, at: aio_poll fs/aio.c:1751 [inline]
000000003590ceda (&fiq->waitq){+.+.}, at: __io_submit_one.constprop.0+0x203/0x5b0 fs/aio.c:1825
and this task is already holding:
0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:363 [inline]
0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1749 [inline]
0000000075037284 (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one.constprop.0+0x1f4/0x5b0 fs/aio.c:1825
which would create a new lock dependency:
(&(&ctx->ctx_lock)->rlock){..-.} -> (&fiq->waitq){+.+.}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&(&ctx->ctx_lock)->rlock){..-.}
[...]
Reported-by: syzbot+af05535bb79520f95431@syzkaller.appspotmail.com
Reported-by: syzbot+d86c4426a01f60feddc7@syzkaller.appspotmail.com
Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL")
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The unused vfs code can be removed. Don't pass empty subtype (same as if
->parse callback isn't called).
The bits that are left involve determining whether it's permitted to split the
filesystem type string passed in to mount(2). Consequently, this means that we
cannot get rid of the FS_HAS_SUBTYPE flag unless we define that a type string
with a dot in it always indicates a subtype specification.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Convert the fuse filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
