summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-11Linux 6.4-rc6v6.4-rc6Linus Torvalds
2023-06-11Merge tag 'x86_urgent_for_v6.4_rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: - Set up the kernel CS earlier in the boot process in case EFI boots the kernel after bypassing the decompressor and the CS descriptor used ends up being the EFI one which is not mapped in the identity page table, leading to early SEV/SNP guest communication exceptions resulting in the guest crashing * tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/head/64: Switch to KERNEL_CS as soon as new GDT is installed
2023-06-11Merge tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: "Five smb3 server fixes, all also for stable: - Fix four slab out of bounds warnings: improve checks for protocol id, and for small packet length, and for create context parsing, and for negotiate context parsing - Fix for incorrect dereferencing POSIX ACLs" * tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd: ksmbd: validate smb request protocol id ksmbd: check the validation of pdu_size in ksmbd_conn_handler_loop ksmbd: fix posix_acls and acls dereferencing possible ERR_PTR() ksmbd: fix out-of-bound read in parse_lease_state() ksmbd: fix out-of-bound read in deassemble_neg_contexts()
2023-06-10Merge tag 'i2c-for-6.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Biggest news is that Andi Shyti steps in for maintaining the controller drivers. Thank you very much! Other than that, one new driver maintainer and the rest is usual driver bugfixes. at24 has a Kconfig dependecy fix" * tag 'i2c-for-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver eeprom: at24: also select REGMAP i2c: sprd: Delete i2c adapter in .remove's error path i2c: mv64xxx: Fix reading invalid status value in atomic mode i2c: designware: fix idx_write_cnt in read loop i2c: mchp-pci1xxxx: Avoid cast to incompatible function type i2c: img-scb: Fix spelling mistake "innacurate" -> "inaccurate" MAINTAINERS: Add myself as I2C host drivers maintainer
2023-06-10Merge tag 'soundwire-6.4-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire fixes from Vinod Koul: "Core fix for missing flag clear, error patch handling in qcom driver and BIOS quirk for HP Spectre x360: - HP Spectre x360 soundwire DMI quirk - Error path handling for qcom driver - Core fix for missing clear of alloc_slave_rt" * tag 'soundwire-6.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: stream: Add missing clear of alloc_slave_rt soundwire: qcom: add proper error paths in qcom_swrm_startup() soundwire: dmi-quirks: add new mapping for HP Spectre x360
2023-06-10Merge tag 'arm-fixes-6.4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Most of the changes this time are for the Qualcomm Snapdragon platforms. There are bug fixes for error handling in Qualcomm icc-bwmon, rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee firmware driver and a missing initialization in the Arm ff-a firmware driver. The Qualcomm RPMh and EDAC drivers need some rework to work correctly on all supported chips. The DT fixes include: - i.MX8 fixes for gpio, pinmux and clock settings - ADS touchscreen gpio polarity settings in several machines - Address dtb warnings for caches, panel and input-enable properties on Qualcomm platforms - Incorrect data on qualcomm platforms fir SA8155P power domains, SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire - Remoteproc firmware paths are corrected for Sony Xperia 10 IV" * tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits) firmware: arm_ffa: Set handle field to zero in memory descriptor ARM: dts: Fix erroneous ADS touchscreen polarities arm64: dts: imx8mn-beacon: Fix SPI CS pinmux arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals EDAC/qcom: Get rid of hardcoded register offsets EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup() arm64: dts: qcom: sm8550: Use the correct LLCC register scheme dt-bindings: cache: qcom,llcc: Fix SM8550 description arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards arm64: dts: qcom: sm8550: use uint16 for Soundwire interval soc: qcom: rpmhpd: Add SA8155P power domains arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains dt-bindings: power: qcom,rpmpd: Add SA8155P soc: qcom: Rename ice to qcom_ice to avoid module name conflict soc: qcom: rmtfs: Fix error code in probe() soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe() ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc ARM: at91: pm: fix imbalanced reference counter for ethernet devices arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths ...
2023-06-09Merge tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - Fix an issue with the hardware queue nr_active, causing it to become imbalanced (Tian) - Fix an issue with null_blk not releasing pages if configured as memory backed (Nitesh) - Fix a locking issue in dasd (Jan) * tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linux: s390/dasd: Use correct lock while counting channel queue length null_blk: Fix: memory release when memory_backed=1 blk-mq: fix blk_mq_hw_ctx active request accounting
2023-06-09Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio bug fixes from Michael Tsirkin: "A bunch of fixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: tools/virtio: use canonical ftrace path vhost_vdpa: support PACKED when setting-getting vring_base vhost: support PACKED when setting-getting vring_base vhost: Fix worker hangs due to missed wake up calls vhost: Fix crash during early vhost_transport_send_pkt calls vhost_net: revert upend_idx only on retriable error vhost_vdpa: tell vqs about the negotiated vdpa/mlx5: Fix hang when cvq commands are triggered during device unregister tools/virtio: Add .gitignore for ringtest tools/virtio: Fix arm64 ringtest compilation error vduse: avoid empty string for dev name vhost: use kzalloc() instead of kmalloc() followed by memset()
2023-06-09Merge tag 'ceph-for-6.4-rc6' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "A fix for a potential data corruption in differential backup and snapshot-based mirroring scenarios in RBD and a reference counting fixup to avoid use-after-free in CephFS, all marked for stable" * tag 'ceph-for-6.4-rc6' of https://github.com/ceph/ceph-client: ceph: fix use-after-free bug for inodes when flushing capsnaps rbd: get snapshot context after exclusive lock is ensured to be held rbd: move RBD_OBJ_FLAG_COPYUP_ENABLED flag setting
2023-06-09s390/dasd: Use correct lock while counting channel queue lengthJan Höppner
The lock around counting the channel queue length in the BIODASDINFO ioctl was incorrectly changed to the dasd_block->queue_lock with commit 583d6535cb9d ("dasd: remove dead code"). This can lead to endless list iterations and a subsequent crash. The queue_lock is supposed to be used only for queue lists belonging to dasd_block. For dasd_device related queue lists the ccwdev lock must be used. Fix the mentioned issues by correctly using the ccwdev lock instead of the queue lock. Fixes: 583d6535cb9d ("dasd: remove dead code") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20230609153750.1258763-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-06-09Merge tag 'riscv-for-linus-6.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - A fix to avoid ISA-disallowed privilege mappings that can result from WRITE+EXEC mmap requests from userspace. - A fix for kfence to handle the huge pages. - A fix to avoid converting misaligned VAs to huge pages. - ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE has been selected so kprobe can understand user pointers. * tag 'riscv-for-linus-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: fix kprobe __user string arg print fault issue riscv: Check the virtual alignment before choosing a map size riscv: Fix kfence now that the linear mapping can be backed by PUD/P4D/PGD riscv: mm: Ensure prot of VM_WRITE and VM_EXEC must be readable
2023-06-09Merge tag 's390-6.4-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Alexander Gordeev: - Avoid linker error for randomly generated config file that has CONFIG_BRANCH_PROFILE_NONE enabled and make it similar to riscv, x86 and also to commit 4bf3ec384edf ("s390: disable branch profiling for vdso"). - Currently, if the device is offline and all the channel paths are either configured or varied offline, the associated subchannel gets unregistered. Don't unregister the subchannel, instead unregister offline device. * tag 's390-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/purgatory: disable branch profiling s390/cio: unregister device when the only path is gone
2023-06-09Merge tag 'gpio-fixes-for-v6.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "Two fixes for the GPIO testing module and one commit making Andy a reviewer for the GPIO subsystem: - fix a memory corruption bug in gpio-sim - fix inconsistencies in user-space configuration of gpio-sim - make Andy Shevchenko a reviewer for the GPIO subsystem" * tag 'gpio-fixes-for-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: MAINTAINERS: add Andy Shevchenko as reviewer for the GPIO subsystem gpio: sim: quietly ignore configured lines outside the bank gpio: sim: fix memory corruption when adding named lines and unnamed hogs
2023-06-09tools/virtio: use canonical ftrace pathRoss Zwisler
The canonical location for the tracefs filesystem is at /sys/kernel/tracing. But, from Documentation/trace/ftrace.rst: Before 4.1, all ftrace tracing control files were within the debugfs file system, which is typically located at /sys/kernel/debug/tracing. For backward compatibility, when mounting the debugfs file system, the tracefs file system will be automatically mounted at: /sys/kernel/debug/tracing A few spots in tools/virtio still refer to this older debugfs path, so let's update them to avoid confusion. Signed-off-by: Ross Zwisler <zwisler@google.com> Message-Id: <20230215223350.2658616-6-zwisler@google.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
2023-06-09vhost_vdpa: support PACKED when setting-getting vring_baseShannon Nelson
Use the right structs for PACKED or split vqs when setting and getting the vring base. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Message-Id: <20230424225031.18947-4-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2023-06-09vhost: support PACKED when setting-getting vring_baseShannon Nelson
Use the right structs for PACKED or split vqs when setting and getting the vring base. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Message-Id: <20230424225031.18947-3-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2023-06-09Merge tag 'pinctrl-v6.4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fix from Linus Walleij: "A single fix for the Meson driver, nothing else has surfaced so far this cycle" * tag 'pinctrl-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: meson-axg: add missing GPIOA_18 gpio group
2023-06-09Merge tag 'sound-6.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Lots of small fixes, and almost all are device-specific. A few of them are the fixes for the old regressions by the fast kctl lookups (introduced around 5.19). Others are ASoC simple-card fixes, selftest compile warning fixes, ASoC AMD quirks, various ASoC codec fixes as well as usual HD-audio quirks" * tag 'sound-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits) ALSA: hda/realtek: Enable 4 amplifiers instead of 2 on a HP platform ALSA: hda: Fix kctl->id initialization ALSA: gus: Fix kctl->id initialization ALSA: cmipci: Fix kctl->id initialization ALSA: ymfpci: Fix kctl->id initialization ALSA: ice1712,ice1724: fix the kcontrol->id initialization ALSA: hda/realtek: Add quirk for Clevo NS50AU ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41 ALSA: hda/realtek: Add "Intel Reference board" and "NUC 13" SSID in the ALC256 ALSA: hda/realtek: Add Lenovo P3 Tower platform ALSA: hda/realtek: Add a quirk for HP Slim Desktop S01 selftests: alsa: pcm-test: Fix compiler warnings about the format ASoC: fsl_sai: Enable BCI bit if SAI works on synchronous mode with BYP asserted ASoC: simple-card-utils: fix PCM constraint error check ASoC: cs35l56: Remove NULL check from cs35l56_sdw_dai_set_stream() ASoC: max98363: limit the number of channel to 1 ASoC: max98363: Removed 32bit support ASoC: mediatek: mt8195: fix use-after-free in driver remove path ASoC: mediatek: mt8188: fix use-after-free in driver remove path ASoC: amd: yc: Add Thinkpad Neo14 to quirks list for acp6x ...
2023-06-09Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fix from Ted Ts'o: "Fix an ext4 regression which breaks remounting r/w file systems that have the quota feature enabled" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: only check dquot_initialize_needed() when debugging Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled"
2023-06-09Merge tag 'at24-fixes-for-v6.4-rc6' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current at24 fixes for v6.4-rc6 - fix a Kconfig issue (we need to select REGMAP, not only REGMAP_I2C)
2023-06-09Merge tag 'imx-fixes-6.4-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.4, round 2: - Fix SPI CS pinmux for the final production version of imx8mn-beacon board. - Fix GPIOs for USDHC2 CD and WP signals on imx8qm-mek board. - Assign default clock rate for i.MX8 LPUARTs to fix UART failure. * tag 'imx-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mn-beacon: Fix SPI CS pinmux arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals Link: https://lore.kernel.org/r/20230607141312.GU4199@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-08Merge tag 'drm-fixes-2023-06-09' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Bit busier and a bit more scattered than usual. amdgpu is the main one, with ivpu and msm having a few fixes, then i915, exynos, ast, lima, radeon with some misc bits, but overall nothing standing out. fb-helper: - Fill in fb-helper vars more correctly amdgpu: - S0ix fixes - GPU reset fixes - SMU13 fixes - SMU11 fixes - Misc Display fixes - Revert RV/RV2/PCO clock counter changes - Fix Stoney xclk value - Fix reserved vram debug info radeon: - Fix a potential use after free i915: - CDCLK voltage fix for ADL-P - eDP wake sync pulse fix - Two error handling fixes to selftests exynos: - Fix wrong return in Exynos vidi driver - Fix use-after-free issue to Exynos g2d driver ast: - resume and modeset fixes for ast ivpu: - Assorted ivpu fixes lima: - lima context destroy fix msm: - Fix max segment size to address splat on newer a6xx - Disable PSR by default w/ modparam to re-enable, since there still seems to be a lingering issue - Fix HPD issue - Fix issue with unitialized GMU mutex" * tag 'drm-fixes-2023-06-09' of git://anongit.freedesktop.org/drm/drm: (32 commits) drm/msm/a6xx: initialize GMU mutex earlier drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable accel/ivpu: Fix sporadic VPU boot failure accel/ivpu: Do not use mutex_lock_interruptible accel/ivpu: Do not trigger extra VPU reset if the VPU is idle drm/amd/display: Reduce sdp bw after urgent to 90% drm/amdgpu: change reserved vram info print drm/amdgpu: fix xclk freq on CHIP_STONEY drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl Revert "drm/amdgpu: switch to golden tsc registers for raven/raven2" Revert "drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id" Revert "drm/amdgpu: change the reference clock for raven/raven2" drm/amd/display: add ODM case when looking for first split pipe drm/amd: Make lack of `ACPI_FADT_LOW_POWER_S0` or `CONFIG_AMD_PMC` louder during suspend path drm/amd/pm: conditionally disable pcie lane switching for some sienna_cichlid SKUs drm/amd/pm: Fix power context allocation in SMU13 drm/amdgpu: fix Null pointer dereference error in amdgpu_device_recover_vram drm/amd: Disallow s0ix without BIOS support again drm/i915/selftests: Add some missing error propagation drm/exynos: fix race condition UAF in exynos_g2d_exec_ioctl ...
2023-06-08Merge tag 'cgroup-for-6.4-rc5-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: - Fix css_set reference leaks on fork failures - Fix CPU hotplug locking in cgroup_transfer_tasks() which is used by cgroup1 cpuset - Doc update * tag 'cgroup-for-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Documentation: Clarify usage of memory limits cgroup: always put cset in cgroup_css_set_put_fork cgroup: fix missing cpus_read_{lock,unlock}() in cgroup_transfer_tasks()
2023-06-09Merge tag 'drm-msm-fixes-2023-06-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes A few more late fixes for v6.4-rc6 + Fix max segment size to address splat on newer a6xx + Disable PSR by default w/ modparam to re-enable, since there still seems to be a lingering issue + Fix HPD issue + Fix issue with unitialized GMU mutex Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGufjVZRNT6YfQ7YUXFC7Cz95wdLF7QHAYkiGfp+3Xc3DQ@mail.gmail.com
2023-06-08drm/msm/a6xx: initialize GMU mutex earlierDmitry Baryshkov
Move GMU mutex initialization earlier to make sure that it is always initialized. a6xx_destroy can be called from ther failure path before GMU initialization. This fixes the following backtrace: ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 58 at kernel/locking/mutex.c:582 __mutex_lock+0x1ec/0x3d0 Modules linked in: CPU: 0 PID: 58 Comm: kworker/u16:1 Not tainted 6.3.0-rc5-00155-g187c06436519 #565 Hardware name: Qualcomm Technologies, Inc. SM8350 HDK (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mutex_lock+0x1ec/0x3d0 lr : __mutex_lock+0x1ec/0x3d0 sp : ffff800008993620 x29: ffff800008993620 x28: 0000000000000002 x27: ffff47b253c52800 x26: 0000000001000606 x25: ffff47b240bb2810 x24: fffffffffffffff4 x23: 0000000000000000 x22: ffffc38bba15ac14 x21: 0000000000000002 x20: ffff800008993690 x19: ffff47b2430cc668 x18: fffffffffffe98f0 x17: 6f74616c75676572 x16: 20796d6d75642067 x15: 0000000000000038 x14: 0000000000000000 x13: ffffc38bbba050b8 x12: 0000000000000666 x11: 0000000000000222 x10: ffffc38bbba603e8 x9 : ffffc38bbba050b8 x8 : 00000000ffffefff x7 : ffffc38bbba5d0b8 x6 : 0000000000000222 x5 : 000000000000bff4 x4 : 40000000fffff222 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff47b240cb1880 Call trace: __mutex_lock+0x1ec/0x3d0 mutex_lock_nested+0x2c/0x38 a6xx_destroy+0xa0/0x138 a6xx_gpu_init+0x41c/0x618 adreno_bind+0x188/0x290 component_bind_all+0x118/0x248 msm_drm_bind+0x1c0/0x670 try_to_bring_up_aggregate_device+0x164/0x1d0 __component_add+0xa8/0x16c component_add+0x14/0x20 dsi_dev_attach+0x20/0x2c dsi_host_attach+0x9c/0x144 devm_mipi_dsi_attach+0x34/0xac lt9611uxc_attach_dsi.isra.0+0x84/0xfc lt9611uxc_probe+0x5b8/0x67c i2c_device_probe+0x1ac/0x358 really_probe+0x148/0x2ac __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x2bc/0x594 worker_thread+0x228/0x438 kthread+0x108/0x10c ret_from_fork+0x10/0x20 irq event stamp: 299345 hardirqs last enabled at (299345): [<ffffc38bb9ba61e4>] put_cpu_partial+0x1c8/0x22c hardirqs last disabled at (299344): [<ffffc38bb9ba61dc>] put_cpu_partial+0x1c0/0x22c softirqs last enabled at (296752): [<ffffc38bb9890434>] _stext+0x434/0x4e8 softirqs last disabled at (296741): [<ffffc38bb989669c>] ____do_softirq+0x10/0x1c ---[ end trace 0000000000000000 ]--- Fixes: 4cd15a3e8b36 ("drm/msm/a6xx: Make GPU destroy a bit safer") Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/531540/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-06-08drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disableKuogee Hsieh
The internal_hpd flag is set to true by dp_bridge_hpd_enable() and set to false by dp_bridge_hpd_disable() to handle GPIO pinmuxed into DP controller case. HDP related interrupts can not be enabled until internal_hpd is set to true. At current implementation dp_display_config_hpd() will initialize DP host controller first followed by enabling HDP related interrupts if internal_hpd was true at that time. Enable HDP related interrupts depends on internal_hpd status may leave system with DP driver host is in running state but without HDP related interrupts being enabled. This will prevent external display from being detected. Eliminated this dependency by moving HDP related interrupts enable/disable be done at dp_bridge_hpd_enable/disable() directly regardless of internal_hpd status. Changes in V3: -- dp_catalog_ctrl_hpd_enable() and dp_catalog_ctrl_hpd_disable() -- rewording ocmmit text Changes in V4: -- replace dp_display_config_hpd() with dp_display_host_start() -- move enable_irq() at dp_display_host_start(); Changes in V5: -- replace dp_display_host_start() with dp_display_host_init() Changes in V6: -- squash remove enable_irq() and disable_irq() Fixes: cd198caddea7 ("drm/msm/dp: Rely on hpd_enable/disable callbacks") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Tested-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://lore.kernel.org/r/1684878756-17830-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-06-09Merge tag 'drm-misc-fixes-2023-06-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v6.4-rc6: - resume and modeset fixes for ast. - Fill in fb-helper vars more correctly. - Assorted ivpu fixes. - lima context destroy fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ea6b88ec-b653-3781-0b68-cd0275c27923@linux.intel.com
2023-06-09Merge tag 'exynos-drm-fixes-for-v6.4-rc6' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Two fixups - Fix wrong return in Exynos vidi driver. - Fix use-after-free issue to Exynos g2d driver. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230607043148.43303-1-inki.dae@samsung.com
2023-06-09Merge tag 'drm-intel-fixes-2023-06-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes CDCLK voltage fix for ADL-P and eDP wake sync pulse fix. Two error handling fixes to selftests (to appease static checkers) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZIGUHBz7+LsqN2nm@jlahtine-mobl.ger.corp.intel.com
2023-06-09Merge tag 'amd-drm-fixes-6.4-2023-06-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.4-2023-06-07: amdgpu: - S0ix fixes - GPU reset fixes - SMU13 fixes - SMU11 fixes - Misc Display fixes - Revert RV/RV2/PCO clock counter changes - Fix Stoney xclk value - Fix reserved vram debug info radeon: - Fix a potential use after free Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230607213740.7723-1-alexander.deucher@amd.com
2023-06-08Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Two tiny arm64 fixes for -rc6. One fixes a build breakage when MAX_ORDER can be nonsensical if CONFIG_EXPERT=y and the other fixes the address masking for perf's page fault software events so that it is consistent amongst them: - Fix build breakage due to bogus MAX_ORDER definitions on !4k pages - Avoid masking fault address for perf software events" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: pass original fault address to handle_mm_fault() in PER_VMA_LOCK block arm64: Remove the ARCH_FORCE_MAX_ORDER config input prompt
2023-06-08vhost: Fix worker hangs due to missed wake up callsMike Christie
We can race where we have added work to the work_list, but vhost_task_fn has passed that check but not yet set us into TASK_INTERRUPTIBLE. wake_up_process will see us in TASK_RUNNING and just return. This bug was intoduced in commit f9010dbdce91 ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression") when I moved the setting of TASK_INTERRUPTIBLE to simplfy the code and avoid get_signal from logging warnings about being in the wrong state. This moves the setting of TASK_INTERRUPTIBLE back to before we test if we need to stop the task to avoid a possible race there as well. We then have vhost_worker set TASK_RUNNING if it finds work similar to before. Fixes: f9010dbdce91 ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression") Signed-off-by: Mike Christie <michael.christie@oracle.com> Message-Id: <20230607192338.6041-3-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-08vhost: Fix crash during early vhost_transport_send_pkt callsMike Christie
If userspace does VHOST_VSOCK_SET_GUEST_CID before VHOST_SET_OWNER we can race where: 1. thread0 calls vhost_transport_send_pkt -> vhost_work_queue 2. thread1 does VHOST_SET_OWNER which calls vhost_worker_create. 3. vhost_worker_create will set the dev->worker pointer before setting the worker->vtsk pointer. 4. thread0's vhost_work_queue will see the dev->worker pointer is set and try to call vhost_task_wake using not yet set worker->vtsk pointer. 5. We then crash since vtsk is NULL. Before commit 6e890c5d5021 ("vhost: use vhost_tasks for worker threads"), we only had the worker pointer so we could just check it to see if VHOST_SET_OWNER has been done. After that commit we have the vhost_worker and vhost_task pointer, so we can now hit the bug above. This patch embeds the vhost_worker in the vhost_dev and moves the work list initialization back to vhost_dev_init, so we can just check the worker.vtsk pointer to check if VHOST_SET_OWNER has been done like before. Fixes: 6e890c5d5021 ("vhost: use vhost_tasks for worker threads") Signed-off-by: Mike Christie <michael.christie@oracle.com> Message-Id: <20230607192338.6041-2-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: syzbot+d0d442c22fa8db45ff0e@syzkaller.appspotmail.com Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2023-06-08vhost_net: revert upend_idx only on retriable errorAndrey Smetanin
Fix possible virtqueue used buffers leak and corresponding stuck in case of temporary -EIO from sendmsg() which is produced by tun driver while backend device is not up. In case of no-retriable error and zcopy do not revert upend_idx to pass packet data (that is update used_idx in corresponding vhost_zerocopy_signal_used()) as if packet data has been transferred successfully. v2: set vq->heads[ubuf->desc].len equal to VHOST_DMA_DONE_LEN in case of fake successful transmit. Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru> Message-Id: <20230424204411.24888-1-asmetanin@yandex-team.ru> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru> Acked-by: Jason Wang <jasowang@redhat.com>
2023-06-08vhost_vdpa: tell vqs about the negotiatedShannon Nelson
As is done in the net, iscsi, and vsock vhost support, let the vdpa vqs know about the features that have been negotiated. This allows vhost to more safely make decisions based on the features, such as when using PACKED vs split queues. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230424225031.18947-2-shannon.nelson@amd.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-08vdpa/mlx5: Fix hang when cvq commands are triggered during device unregisterDragos Tatulea
Currently the vdpa device is unregistered after the workqueue that processes vq commands is disabled. However, the device unregister process can still send commands to the cvq (a vlan delete for example) which leads to a hang because the handing workqueue has been disabled and the command never finishes: [ 2263.095764] rcu: INFO: rcu_sched self-detected stall on CPU [ 2263.096307] rcu: 9-....: (5250 ticks this GP) idle=dac4/1/0x4000000000000000 softirq=111009/111009 fqs=2544 [ 2263.097154] rcu: (t=5251 jiffies g=393549 q=347 ncpus=10) [ 2263.097648] CPU: 9 PID: 94300 Comm: kworker/u20:2 Not tainted 6.3.0-rc6_for_upstream_min_debug_2023_04_14_00_02 #1 [ 2263.098535] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2263.099481] Workqueue: mlx5_events mlx5_vhca_state_work_handler [mlx5_core] [ 2263.100143] RIP: 0010:virtnet_send_command+0x109/0x170 [ 2263.100621] Code: 1d df f5 ff 85 c0 78 5c 48 8b 7b 08 e8 d0 c5 f5 ff 84 c0 75 11 eb 22 48 8b 7b 08 e8 01 b7 f5 ff 84 c0 75 15 f3 90 48 8b 7b 08 <48> 8d 74 24 04 e8 8d c5 f5 ff 48 85 c0 74 de 48 8b 83 f8 00 00 00 [ 2263.102148] RSP: 0018:ffff888139cf36e8 EFLAGS: 00000246 [ 2263.102624] RAX: 0000000000000000 RBX: ffff888166bea940 RCX: 0000000000000001 [ 2263.103244] RDX: 0000000000000000 RSI: ffff888139cf36ec RDI: ffff888146763800 [ 2263.103864] RBP: ffff888139cf3710 R08: ffff88810d201000 R09: 0000000000000000 [ 2263.104473] R10: 0000000000000002 R11: 0000000000000003 R12: 0000000000000002 [ 2263.105082] R13: 0000000000000002 R14: ffff888114528400 R15: ffff888166bea000 [ 2263.105689] FS: 0000000000000000(0000) GS:ffff88852cc80000(0000) knlGS:0000000000000000 [ 2263.106404] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2263.106925] CR2: 00007f31f394b000 CR3: 000000010615b006 CR4: 0000000000370ea0 [ 2263.107542] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2263.108163] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2263.108769] Call Trace: [ 2263.109059] <TASK> [ 2263.109320] ? check_preempt_wakeup+0x11f/0x230 [ 2263.109750] virtnet_vlan_rx_kill_vid+0x5a/0xa0 [ 2263.110180] vlan_vid_del+0x9c/0x170 [ 2263.110546] vlan_device_event+0x351/0x760 [8021q] [ 2263.111004] raw_notifier_call_chain+0x41/0x60 [ 2263.111426] dev_close_many+0xcb/0x120 [ 2263.111808] unregister_netdevice_many_notify+0x130/0x770 [ 2263.112297] ? wq_worker_running+0xa/0x30 [ 2263.112688] unregister_netdevice_queue+0x89/0xc0 [ 2263.113128] unregister_netdev+0x18/0x20 [ 2263.113512] virtnet_remove+0x4f/0x230 [ 2263.113885] virtio_dev_remove+0x31/0x70 [ 2263.114273] device_release_driver_internal+0x18f/0x1f0 [ 2263.114746] bus_remove_device+0xc6/0x130 [ 2263.115146] device_del+0x173/0x3c0 [ 2263.115502] ? kernfs_find_ns+0x35/0xd0 [ 2263.115895] device_unregister+0x1a/0x60 [ 2263.116279] unregister_virtio_device+0x11/0x20 [ 2263.116706] device_release_driver_internal+0x18f/0x1f0 [ 2263.117182] bus_remove_device+0xc6/0x130 [ 2263.117576] device_del+0x173/0x3c0 [ 2263.117929] ? vdpa_dev_remove+0x20/0x20 [vdpa] [ 2263.118364] device_unregister+0x1a/0x60 [ 2263.118752] mlx5_vdpa_dev_del+0x4c/0x80 [mlx5_vdpa] [ 2263.119232] vdpa_match_remove+0x21/0x30 [vdpa] [ 2263.119663] bus_for_each_dev+0x71/0xc0 [ 2263.120054] vdpa_mgmtdev_unregister+0x57/0x70 [vdpa] [ 2263.120520] mlx5v_remove+0x12/0x20 [mlx5_vdpa] [ 2263.120953] auxiliary_bus_remove+0x18/0x30 [ 2263.121356] device_release_driver_internal+0x18f/0x1f0 [ 2263.121830] bus_remove_device+0xc6/0x130 [ 2263.122223] device_del+0x173/0x3c0 [ 2263.122581] ? devl_param_driverinit_value_get+0x29/0x90 [ 2263.123070] mlx5_rescan_drivers_locked+0xc4/0x2d0 [mlx5_core] [ 2263.123633] mlx5_unregister_device+0x54/0x80 [mlx5_core] [ 2263.124169] mlx5_uninit_one+0x54/0x150 [mlx5_core] [ 2263.124656] mlx5_sf_dev_remove+0x45/0x90 [mlx5_core] [ 2263.125153] auxiliary_bus_remove+0x18/0x30 [ 2263.125560] device_release_driver_internal+0x18f/0x1f0 [ 2263.126052] bus_remove_device+0xc6/0x130 [ 2263.126451] device_del+0x173/0x3c0 [ 2263.126815] mlx5_sf_dev_remove+0x39/0xf0 [mlx5_core] [ 2263.127318] mlx5_sf_dev_state_change_handler+0x178/0x270 [mlx5_core] [ 2263.127920] blocking_notifier_call_chain+0x5a/0x80 [ 2263.128379] mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core] [ 2263.128951] process_one_work+0x1bb/0x3c0 [ 2263.129355] ? process_one_work+0x3c0/0x3c0 [ 2263.129766] worker_thread+0x4d/0x3c0 [ 2263.130140] ? process_one_work+0x3c0/0x3c0 [ 2263.130548] kthread+0xb9/0xe0 [ 2263.130895] ? kthread_complete_and_exit+0x20/0x20 [ 2263.131349] ret_from_fork+0x1f/0x30 [ 2263.131717] </TASK> The fix is to disable and destroy the workqueue after the device unregister. It is expected that vhost will not trigger kicks after the unregister. But even if it would, the wq is disabled already by setting the pointer to NULL (done so in the referenced commit). Fixes: ad6dc1daaf29 ("vdpa/mlx5: Avoid processing works if workqueue was destroyed") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Message-Id: <20230516095800.3549932-1-dtatulea@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com>
2023-06-08tools/virtio: Add .gitignore for ringtestRong Tao
Ignore executables for ringtest. Signed-off-by: Rong Tao <rongtao@cestc.cn> Message-Id: <tencent_C121802C93CB4095C6D7D95113442E830A07@qq.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-08tools/virtio: Fix arm64 ringtest compilation errorRong Tao
Add cpu_relax() for arm64 instead of directly assert(), and add assert.h header file. Also, add smp_wmb and smp_mb for arm64. Compilation error as follows, avoid __always_inline undefined. $ make cc -Wall -pthread -O2 -ggdb -flto -fwhole-program -c -o ring.o ring.c In file included from ring.c:10: main.h: In function ‘busy_wait’: main.h:99:21: warning: implicit declaration of function ‘assert’ [-Wimplicit-function-declaration] 99 | #define cpu_relax() assert(0) | ^~~~~~ main.h:107:17: note: in expansion of macro ‘cpu_relax’ 107 | cpu_relax(); | ^~~~~~~~~ main.h:12:1: note: ‘assert’ is defined in header ‘<assert.h>’; did you forget to ‘#include <assert.h>’? 11 | #include <stdbool.h> +++ |+#include <assert.h> 12 | main.h: At top level: main.h:143:23: error: expected ‘;’ before ‘void’ 143 | static __always_inline | ^ | ; 144 | void __read_once_size(const volatile void *p, void *res, int size) | ~~~~ main.h:158:23: error: expected ‘;’ before ‘void’ 158 | static __always_inline void __write_once_size(volatile void *p, void *res, int size) | ^~~~~ | ; make: *** [<builtin>: ring.o] Error 1 Signed-off-by: Rong Tao <rongtao@cestc.cn> Message-Id: <tencent_F53E159DD7925174445D830DA19FACF44B07@qq.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-08vduse: avoid empty string for dev nameSheng Zhao
Syzkaller hits a kernel WARN when the first character of the dev name provided is NULL. Solution is to add a NULL check before calling cdev_device_add() in vduse_create_dev(). kobject: (0000000072042169): attempted to be registered with empty name! WARNING: CPU: 0 PID: 112695 at lib/kobject.c:236 Call Trace: kobject_add_varg linux/src/lib/kobject.c:390 [inline] kobject_add+0xf6/0x150 linux/src/lib/kobject.c:442 device_add+0x28f/0xc20 linux/src/drivers/base/core.c:2167 cdev_device_add+0x83/0xc0 linux/src/fs/char_dev.c:546 vduse_create_dev linux/src/drivers/vdpa/vdpa_user/vduse_dev.c:2254 [inline] vduse_ioctl+0x7b5/0xf30 linux/src/drivers/vdpa/vdpa_user/vduse_dev.c:2316 vfs_ioctl linux/src/fs/ioctl.c:47 [inline] file_ioctl linux/src/fs/ioctl.c:510 [inline] do_vfs_ioctl+0x14b/0xa80 linux/src/fs/ioctl.c:697 ksys_ioctl+0x7c/0xa0 linux/src/fs/ioctl.c:714 __do_sys_ioctl linux/src/fs/ioctl.c:721 [inline] __se_sys_ioctl linux/src/fs/ioctl.c:719 [inline] __x64_sys_ioctl+0x42/0x50 linux/src/fs/ioctl.c:719 do_syscall_64+0x94/0x330 linux/src/arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace") Cc: "Xie Yongji" <xieyongji@bytedance.com> Reported-by: Xianjun Zeng <zengxianjun@bytedance.com> Signed-off-by: Sheng Zhao <sheng.zhao@bytedance.com> Message-Id: <20230530033626.1266794-1-sheng.zhao@bytedance.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xie Yongji <xieyongji@bytedance.com> Cc: "Michael S. Tsirkin"<mst@redhat.com>, "Jason Wang"<jasowang@redhat.com>, Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
2023-06-08MAINTAINERS: Add entries for Renesas RZ/V2M I2C driverBiju Das
Add the MAINTAINERS entries for the Renesas RZ/V2M I2C driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-06-08riscv: fix kprobe __user string arg print fault issueRuan Jinjie
On riscv qemu platform, when add kprobe event on do_sys_open() to show filename string arg, it just print fault as follow: echo 'p:myprobe do_sys_open dfd=$arg1 filename=+0($arg2):string flags=$arg3 mode=$arg4' > kprobe_events bash-166 [000] ...1. 360.195367: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6 bash-166 [000] ...1. 360.219369: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6 bash-191 [000] ...1. 360.378827: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename=(fault) flags=0x98800 mode=0x0 As riscv do not select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE, the +0($arg2) addr is processed as a kernel address though it is a userspace address, cause the above filename=(fault) print. So select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to avoid the issue, after that the kprobe trace is ok as below: bash-166 [000] ...1. 96.767641: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6 bash-166 [000] ...1. 96.793751: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6 bash-177 [000] ...1. 96.962354: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename="/sys/kernel/debug/tracing/events/kprobes/" flags=0x98800 mode=0x0 Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Acked-by: Björn Töpel <bjorn@rivosinc.com> Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work") Link: https://lore.kernel.org/r/20230504072910.3742842-1-ruanjinjie@huawei.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-06-08Merge tag 'net-6.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can, wifi, netfilter, bluetooth and ebpf. Current release - regressions: - bpf: sockmap: avoid potential NULL dereference in sk_psock_verdict_data_ready() - wifi: iwlwifi: fix -Warray-bounds bug in iwl_mvm_wait_d3_notif() - phylink: actually fix ksettings_set() ethtool call - eth: dwmac-qcom-ethqos: fix a regression on EMAC < 3 Current release - new code bugs: - wifi: mt76: fix possible NULL pointer dereference in mt7996_mac_write_txwi() Previous releases - regressions: - netfilter: fix NULL pointer dereference in nf_confirm_cthelper - wifi: rtw88/rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS - openvswitch: fix upcall counter access before allocation - bluetooth: - fix use-after-free in hci_remove_ltk/hci_remove_irk - fix l2cap_disconnect_req deadlock - nic: bnxt_en: prevent kernel panic when receiving unexpected PHC_UPDATE event Previous releases - always broken: - core: annotate rfs lockless accesses - sched: fq_pie: ensure reasonable TCA_FQ_PIE_QUANTUM values - netfilter: add null check for nla_nest_start_noflag() in nft_dump_basechain_hook() - bpf: fix UAF in task local storage - ipv4: ping_group_range: allow GID from 2147483648 to 4294967294 - ipv6: rpl: fix route of death. - tcp: gso: really support BIG TCP - mptcp: fixes for user-space PM address advertisement - smc: avoid to access invalid RMBs' MRs in SMCRv1 ADD LINK CONT - can: avoid possible use-after-free when j1939_can_rx_register fails - batman-adv: fix UaF while rescheduling delayed work - eth: qede: fix scheduling while atomic - eth: ice: make writes to /dev/gnssX synchronous" * tag 'net-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event bnxt_en: Skip firmware fatal error recovery if chip is not accessible bnxt_en: Query default VLAN before VNIC setup on a VF bnxt_en: Don't issue AP reset during ethtool's reset operation bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg() net: bcmgenet: Fix EEE implementation eth: ixgbe: fix the wake condition eth: bnxt: fix the wake condition lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release() bpf: Add extra path pointer check to d_path helper net: sched: fix possible refcount leak in tc_chain_tmplt_add() net: sched: act_police: fix sparse errors in tcf_police_dump() net: openvswitch: fix upcall counter access before allocation net: sched: move rtm_tca_policy declaration to include file ice: make writes to /dev/gnssX synchronous net: sched: add rcu annotations around qdisc->qdisc_sleeping rfs: annotate lockless accesses to RFS sock flow table rfs: annotate lockless accesses to sk->sk_rxhash virtio_net: use control_buf for coalesce params ...
2023-06-08Merge tag 'xfs-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fixes from Dave Chinner: "These are a set of regression fixes discovered on recent kernels. I was hoping to send this to you a week and half ago, but events out of my control delayed finalising the changes until early this week. Whilst the diffstat looks large for this stage of the merge window, a large chunk of it comes from moving the guts of one function from one file to another i.e. it's the same code, it is just run in a different context where it is safe to hold a specific lock. Otherwise the individual changes are relatively small and straigtht forward. Summary: - Propagate unlinked inode list corruption back up to log recovery (regression fix) - improve corruption detection for AGFL entries, AGFL indexes and XEFI extents (syzkaller fuzzer oops report) - Avoid double perag reference release (regression fix) - Improve extent merging detection in scrub (regression fix) - Fix a new undefined high bit shift (regression fix) - Fix for AGF vs inode cluster buffer deadlock (regression fix)" * tag 'xfs-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: collect errors from inodegc for unlinked inode recovery xfs: validate block number being freed before adding to xefi xfs: validity check agbnos on the AGFL xfs: fix agf/agfl verification on v4 filesystems xfs: fix double xfs_perag_rele() in xfs_filestream_pick_ag() xfs: fix broken logic when detecting mergeable bmap records xfs: Fix undefined behavior of shift into sign bit xfs: fix AGF vs inode cluster buffer deadlock xfs: defered work could create precommits xfs: restore allocation trylock iteration xfs: buffer pins need to hold a buffer reference
2023-06-08ext4: only check dquot_initialize_needed() when debuggingTheodore Ts'o
ext4_xattr_block_set() relies on its caller to call dquot_initialize() on the inode. To assure that this has happened there are WARN_ON checks. Unfortunately, this is subject to false positives if there is an antagonist thread which is flipping the file system at high rates between r/o and rw. So only do the check if EXT4_XATTR_DEBUG is enabled. Link: https://lore.kernel.org/r/20230608044056.GA1418535@mit.edu Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-06-08Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is ↵Theodore Ts'o
re-enabled" This reverts commit a44be64bbecb15a452496f60db6eacfee2b59c79. Link: https://lore.kernel.org/r/653b3359-2005-21b1-039d-c55ca4cffdcc@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-06-08soundwire: stream: Add missing clear of alloc_slave_rtCharles Keepax
The current path that skips allocating the slave runtime does not clear the alloc_slave_rt flag, this is clearly incorrect. Add the missing clear, so the runtime won't be erroneously cleaned up. Fixes: f3016b891c8c ("soundwire: stream: sdw_stream_add_ functions can be called multiple times") Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230602101140.2040141-1-ckeepax@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-06-08Merge branch 'bnxt_en-bug-fixes'Paolo Abeni
Michael Chan says: ==================== bnxt_en: Bug fixes This patchset has the following fixes for bnxt_en: 1. Add missing VNIC ID parameter in the FW message when getting an updated RSS configuration from the FW. 2. Fix a warning when doing ethtool reset on newer chips. 3. Fix VLAN issue on a VF when a default VLAN is assigned. 4. Fix a problem during DPC (Downstream Port containment) scenario. 5. Fix a NULL pointer dereference when receiving a PTP event from FW. 6. Fix VXLAN/Geneve UDP port delete/add with newer FW. ==================== Link: https://lore.kernel.org/r/20230607075409.228450-1-michael.chan@broadcom.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacksSomnath Kotur
As per the new udp tunnel framework, drivers which need to know the details of a port entry (i.e. port type) when it gets deleted should use the .set_port / .unset_port callbacks. Implementing the current .udp_tunnel_sync callback would mean that the deleted tunnel port entry would be all zeros. This used to work on older firmware because it would not check the input when deleting a tunnel port. With newer firmware, the delete will now fail and subsequent tunnel port allocation will fail as a result. Fixes: 442a35a5a7aa ("bnxt: convert to new udp_tunnel_nic infra") Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE eventPavan Chebbi
The firmware can send PHC_RTC_UPDATE async event on a PF that may not have PTP registered. In such a case, there will be a null pointer deference for bp->ptp_cfg when we try to handle the event. Fix it by not registering for this event with the firmware if !bp->ptp_cfg. Also, check that bp->ptp_cfg is valid before proceeding when we receive the event. Fixes: 8bcf6f04d4a5 ("bnxt_en: Handle async event when the PHC is updated in RTC mode") Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08bnxt_en: Skip firmware fatal error recovery if chip is not accessibleVikas Gupta
Driver starts firmware fatal error recovery by detecting heartbeat failure or fw reset count register changing. But these checks are not reliable if the device is not accessible. This can happen while DPC (Downstream Port containment) is in progress. Skip firmware fatal recovery if pci_device_is_present() returns false. Fixes: acfb50e4e773 ("bnxt_en: Add FW fatal devlink_health_reporter.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>