Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix a use-case where no pins are mapped to GPIOs in
gpiochip_generic_config()
* tag 'gpio-fixes-for-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Handle no pin_ranges in gpiochip_generic_config()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix a global-out-of-bounds bug in nct6775 driver"
* tag 'hwmon-for-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6775) Fix access to temperature configuration registers
|
|
MHI allows the channel configs to be const, so constify
aic100_channels to prevent runtime modification.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222-mhi-const-accel-qaic-v1-1-028db0dd9098@quicinc.com
|
|
Prior to commit 092edaddb660 ("iommu: Support mm PASID 1:n with sva
domains") the code allowed a SVA handle to be bound multiple times to the
same (mm, device) pair. This was alluded to in the kdoc comment, but we
had understood this to be more a remark about allowing multiple devices,
not a literal same-driver re-opening the same SVA.
It turns out uacce and idxd were both relying on the core code to handle
reference counting for same-device same-mm scenarios. As this looks hard
to resolve in the drivers bring it back to the core code.
The new design has changed the meaning of the domain->users refcount to
refer to the number of devices that are sharing that domain for the same
mm. This is part of the design to lift the SVA domain de-duplication out
of the drivers.
Return the old behavior by explicitly de-duplicating the struct iommu_sva
handle. The same (mm, device) will return the same handle pointer and the
core code will handle tracking this. The last unbind of the handle will
destroy it.
Fixes: 092edaddb660 ("iommu: Support mm PASID 1:n with sva domains")
Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Closes: https://lore.kernel.org/all/20240221110658.529-1-zhangfei.gao@linaro.org/
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-9455fc497a6f+3b4-iommu_sva_sharing_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into iommu/fixes
Arm SMMU fixes for 6.8
- Fix CD allocation from atomic context when using SVA with SMMUv3
- Revert the conversion of SMMUv2 to domain_alloc_paging(), as it
breaks the boot for Qualcomm MSM8996 devices
|
|
Fixing some doc build issues:
Documentation/gpu/i915:222: drivers/gpu/drm/i915/display/intel_cdclk.c:69: ERROR: Unexpected indentation.
Documentation/gpu/i915:222: ./drivers/gpu/drm/i915/display/intel_cdclk.c:70: WARNING: Block quote ends without a blank line; unexpected unindent.
v2: Minimize the empty lines (Gustavo)
Closes: https://lore.kernel.org/all/20240219161747.0e867406@canb.auug.org.au/
Fixes: 79e2ea2eaaa6 ("drm/i915/cdclk: Document CDCLK update methods")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221155453.94208-1-rodrigo.vivi@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v6.8
- Add missing #interrupt-cells to DA9063 nodes.
* tag 'renesas-fixes-for-v6.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes
Link: https://lore.kernel.org/r/cover.1708597150.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Devicetree fixes for v6.8-rc6
Two fixes for W=2 issues in devicetrees, which should constitute fixes
for all reasonable-to-fix W=2 problems on RISC-V. The others are caused
by standard USB and MMC property names containing underscores that are
not likely to ever change.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: sifive: add missing #interrupt-cells to pmic
riscv: dts: starfive: replace underscores in node names
Link: https://lore.kernel.org/r/20240221-foil-glade-09dbf1aa3fe2@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V SoC driver fixes for v6.8-rc6
A fix for a kconfig symbol whose help text has been unhelpful since its
introduction.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-drivers-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
soc: microchip: Fix POLARFIRE_SOC_SYS_CTRL input prompt
Link: https://lore.kernel.org/r/20240221-irate-outrage-cf7f96f83074@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
Microchip firmware driver fixes for v6.8-rc6
A single fix for me incorrectly using sizeof().
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-firmware-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: fix wrong sizeof argument
Link: https://lore.kernel.org/r/20240221-recognize-dust-4bb575f4e67b@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Cache driver fixes for v6.8-rc6
A single fix for an inconsistency reported during CIP review by Pavel in
the newly added ax45mp cache driver.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-cache-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback()
Link: https://lore.kernel.org/r/20240221-keenness-handheld-b930aaa77708@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All the checks currently done in kvm_check_cpucfg can be realized with
early returns, so just do that to avoid extra cognitive burden related
to the return value handling.
While at it, clean up comments of _kvm_get_cpucfg_mask() and
kvm_check_cpucfg(), by removing comments that are merely restatement of
the code nearby, and paraphrasing the rest so they read more natural for
English speakers (that likely are not familiar with the actual Chinese-
influenced grammar).
No functional changes intended.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The function is not actually a getter of guest CPUCFG, but rather
validation of the input CPUCFG ID plus information about the supported
bit flags of that CPUCFG leaf. So rename it to avoid confusion.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The range check for the CPUCFG ID is wrong (should have been a ||
instead of &&) and useless in effect, so fix the obvious mistake.
Furthermore, the juggling of the temp return value is unnecessary,
because it is semantically equivalent and more readable to just
return at every switch case's end. This is done too to avoid potential
bugs in the future related to the unwanted complexity.
Also, the return value of _kvm_get_cpucfg is meant to be checked, but
this was not done, so bad CPUCFG IDs wrongly fall back to the default
case and 0 is incorrectly returned; check the return value to fix the
UAPI behavior.
While at it, also remove the redundant range check in kvm_check_cpucfg,
because out-of-range CPUCFG IDs are already rejected by the -EINVAL
as returned by _kvm_get_cpucfg().
Fixes: db1ecca22edf ("LoongArch: KVM: Add LSX (128bit SIMD) support")
Fixes: 118e10cd893d ("LoongArch: KVM: Add LASX (256bit SIMD) support")
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The DTS code coding style expects exactly one space before '{'
character.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The unflatten_and_copy_device_tree() function contains a call to
memblock_alloc(). This means that memblock is allocating memory before
any of the reserved memory regions are set aside in the arch_mem_init()
function which calls early_init_fdt_scan_reserved_mem(). Therefore,
there is a possibility for memblock to allocate from any of the
reserved memory regions.
Hence, move the call to early_init_fdt_scan_reserved_mem() to be earlier
in the init sequence, so that the reserved memory regions are set aside
before any allocations are done using memblock.
Cc: stable@vger.kernel.org
Fixes: 88d4d957edc707e ("LoongArch: Add FDT booting support from efi system table")
Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Update cpu_sibling_map when disabling nonboot CPUs by defining & calling
clear_cpu_sibling_map(), otherwise we get such errors on SMT systems:
jump label: negative count!
WARNING: CPU: 6 PID: 45 at kernel/jump_label.c:263 __static_key_slow_dec_cpuslocked+0xec/0x100
CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340
pc 90000000004c302c ra 90000000004c302c tp 90000001005bc000 sp 90000001005bfd20
a0 000000000000001b a1 900000000224c278 a2 90000001005bfb58 a3 900000000224c280
a4 900000000224c278 a5 90000001005bfb50 a6 0000000000000001 a7 0000000000000001
t0 ce87a4763eb5234a t1 ce87a4763eb5234a t2 0000000000000000 t3 0000000000000000
t4 0000000000000006 t5 0000000000000000 t6 0000000000000064 t7 0000000000001964
t8 000000000009ebf6 u0 9000000001f2a068 s9 0000000000000000 s0 900000000246a2d8
s1 ffffffffffffffff s2 ffffffffffffffff s3 90000000021518c0 s4 0000000000000040
s5 9000000002151058 s6 9000000009828e40 s7 00000000000000b4 s8 0000000000000006
ra: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100
ERA: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV)
CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340
Stack : 0000000000000000 900000000203f258 900000000179afc8 90000001005bc000
90000001005bf980 0000000000000000 90000001005bf988 9000000001fe0be0
900000000224c280 900000000224c278 90000001005bf8c0 0000000000000001
0000000000000001 ce87a4763eb5234a 0000000007f38000 90000001003f8cc0
0000000000000000 0000000000000006 0000000000000000 4c206e6f73676e6f
6f4c203a656d616e 000000000009ec99 0000000007f38000 0000000000000000
900000000214b000 9000000001fe0be0 0000000000000004 0000000000000000
0000000000000107 0000000000000009 ffffffffffafdabe 00000000000000b4
0000000000000006 90000000004c302c 9000000000224528 00005555939a0c7c
00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
...
Call Trace:
[<9000000000224528>] show_stack+0x48/0x1a0
[<900000000179afc8>] dump_stack_lvl+0x78/0xa0
[<9000000000263ed0>] __warn+0x90/0x1a0
[<90000000017419b8>] report_bug+0x1b8/0x280
[<900000000179c564>] do_bp+0x264/0x420
[<90000000004c302c>] __static_key_slow_dec_cpuslocked+0xec/0x100
[<90000000002b4d7c>] sched_cpu_deactivate+0x2fc/0x300
[<9000000000266498>] cpuhp_invoke_callback+0x178/0x8a0
[<9000000000267f70>] cpuhp_thread_fun+0xf0/0x240
[<90000000002a117c>] smpboot_thread_fn+0x1dc/0x2e0
[<900000000029a720>] kthread+0x140/0x160
[<9000000000222288>] ret_from_kernel_thread+0xc/0xa4
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Disable IRQ before init_fn() for nonboot CPUs when hotplug, in order to
silence such warnings (and also avoid potential errors due to unexpected
interrupts):
WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:4503 rcu_cpu_starting+0x214/0x280
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198
pc 90000000048e3334 ra 90000000047bd56c tp 900000010039c000 sp 900000010039fdd0
a0 0000000000000001 a1 0000000000000006 a2 900000000802c040 a3 0000000000000000
a4 0000000000000001 a5 0000000000000004 a6 0000000000000000 a7 90000000048e3f4c
t0 0000000000000001 t1 9000000005c70968 t2 0000000004000000 t3 000000000005e56e
t4 00000000000002e4 t5 0000000000001000 t6 ffffffff80000000 t7 0000000000040000
t8 9000000007931638 u0 0000000000000006 s9 0000000000000004 s0 0000000000000001
s1 9000000006356ac0 s2 9000000007244000 s3 0000000000000001 s4 0000000000000001
s5 900000000636f000 s6 7fffffffffffffff s7 9000000002123940 s8 9000000001ca55f8
ra: 90000000047bd56c tlb_init+0x24c/0x528
ERA: 90000000048e3334 rcu_cpu_starting+0x214/0x280
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000000 (PPLV0 -PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071000 (LIE=12 VS=7)
ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198
Stack : 0000000000000000 9000000006375000 9000000005b61878 900000010039c000
900000010039fa30 0000000000000000 900000010039fa38 900000000619a140
9000000006456888 9000000006456880 900000010039f950 0000000000000001
0000000000000001 cb0cb028ec7e52e1 0000000002b90000 9000000100348700
0000000000000000 0000000000000001 ffffffff916d12f1 0000000000000003
0000000000040000 9000000007930370 0000000002b90000 0000000000000004
9000000006366000 900000000619a140 0000000000000000 0000000000000004
0000000000000000 0000000000000009 ffffffffffc681f2 9000000002123940
9000000001ca55f8 9000000006366000 90000000047a4828 00007ffff057ded8
00000000000000b0 0000000000000000 0000000000000000 0000000000071000
...
Call Trace:
[<90000000047a4828>] show_stack+0x48/0x1a0
[<9000000005b61874>] dump_stack_lvl+0x84/0xcc
[<90000000047f60ac>] __warn+0x8c/0x1e0
[<9000000005b0ab34>] report_bug+0x1b4/0x280
[<9000000005b63110>] do_bp+0x2d0/0x480
[<90000000047a2e20>] handle_bp+0x120/0x1c0
[<90000000048e3334>] rcu_cpu_starting+0x214/0x280
[<90000000047bd568>] tlb_init+0x248/0x528
[<90000000047a4c44>] per_cpu_trap_init+0x124/0x160
[<90000000047a19f4>] cpu_probe+0x494/0xa00
[<90000000047b551c>] start_secondary+0x3c/0xc0
[<9000000005b66134>] smpboot_entry+0x50/0x58
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
If fixed refresh rate program the PKGC_LATENCY register
with the highest latency from level 1 and above LP registers
and program ADDED_WAKE_TIME = DSB execution time.
else program PKGC_LATENCY with all 1's and ADDED_WAKE_TIME as 0.
This is used to improve package C residency by sending the highest
latency tolerance requirement (LTR) when the planes are done with the
frame until the next frame programming window (set context latency,
window 2) starts.
Bspec: 68986
--v2
-Fix indentation [Chaitanya]
--v3
-Take into account if fixed refrersh rate or not [Vinod]
-Added wake time dependengt on DSB execution time [Vinod]
-Use REG_FIELD_PREP [Jani]
-Call program_pkgc_latency from appropriate place [Jani]
-no need for the ~0 while setting max latency [Jani]
-change commit message to add the new changes made in.
--v4
-Remove extra blank line [Vinod]
-move the vrr.enable check to previous loop [Vinod]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219063638.1467114-1-suraj.kandpal@intel.com
|
|
Add the register that needs to read and written onto for
deep pkgc programming.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240201085158.1000285-2-suraj.kandpal@intel.com
|
|
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1].
As the "q" variable is a pointer to "struct xe_exec_queue" and this
structure ends in a flexible array:
struct xe_exec_queue {
[...]
struct xe_lrc lrc[];
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the argument "size + size * count" in the
kzalloc() function.
This way, the code is more readable and more safer.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240210141913.6611-1-erick.archer@gmx.com
|
|
This reports the currently used vram allocations.
userspace using this has been proposed for nvk, but
it's a rather trivial uapi addition.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This returns the BAR resources size so userspace can make
decisions based on rebar support.
userspace using this has been proposed for nvk, but
it's a rather trivial uapi addition.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Turing and Ampere will continue to use the old paths by default,
but we should allow distros to decide what the policy is.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240214040632.661069-1-airlied@gmail.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Remove support for persistent exec_queues
- Drop a reduntant sysfs newline printout
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- A three-patch fix for a VM_BIND rebind optimization path
- Fix a modpost warning on an xe KUNIT module
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZdcsNrxdWMMM417v@fedora
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.8-2024-02-22:
amdgpu:
- Suspend/resume fixes
- Backlight error fix
- DCN 3.5 fixes
- Misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222195338.5809-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fixup for TV mode
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZdcwT9kltvEgJZZE@jlahtine-mobl.ger.corp.intel.com
|
|
Commit a0df2cc858c3 ("drm/xe/xe_bo_move: Enhance xe_bo_move trace")
inadvertently reverted commit 8d038f49c1f3 ("drm/xe: Fix cast on trace
variable"), breaking the build on 32bits.
As noted by Ville, there's no point in converting the pointers to u64
and add casts everywhere. In fact, it's better to just use %p and let
the address be hashed. Convert all the cases in xe_trace.h to use
pointers.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222144125.2862546-1-lucas.demarchi@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A list handling fix and 64bit division on 32bit platform fix for the
drm/buddy allocator, a cast warning and an initialization fix for
nouveau, a bridge handling fix for meson, an initialisation fix for
ivpu, a SPARC build fix for fbdev, a double-free fix for ttm, and two
fence handling fixes for syncobj.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/gl2antuifidtzn3dfm426p7xwh5fxj23behagwh26owfnosh2w@gqoa7vj5prnh
|
|
YUV420 format is supported only in the VSC SDP packet and not through
MSA. Hence add an API which indicates the sink support which can be used
by the rest of the DP programming.
changes in v5:
- rebased on top of drm-tip
changes in v4:
- bail out early if dpcd rev check fails
changes in v3:
- fix the commit title prefix to drm/dp
- get rid of redundant !!
- break out this change from series [1] to get acks from drm core
maintainers
Changes in v2:
- Move VSC SDP support check API from dp_panel.c to
drm_dp_helper.c
[1]: https://patchwork.freedesktop.org/series/129180/
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Paloma Arellano <quic_parellan@quicinc.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215191556.3227259-1-quic_abhinavk@quicinc.com
|
|
Currently the size parameter of drm_dp_vsc_sdp_pack() is always
the size of struct dp_sdp. Hence lets drop this parameter and
use sizeof() directly.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220195348.1270854-2-quic_abhinavk@quicinc.com
|
|
intel_dp_vsc_sdp_pack() can be re-used by other DRM drivers as well.
Lets move this to drm_dp_helper to achieve this.
changes in v2:
- rebased on top of drm-tip
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220195348.1270854-1-quic_abhinavk@quicinc.com
|
|
Pull block fixes from Jens Axboe:
"Mostly just fixlets for md, but also a sed-opal parsing fix"
* tag 'block-6.8-2024-02-22' of git://git.kernel.dk/linux:
block: sed-opal: handle empty atoms when parsing response
md: Don't suspend the array for interrupted reshape
md: Don't register sync_thread for reshape directly
md: Make sure md_do_sync() will set MD_RECOVERY_DONE
md: Don't ignore read-only array in md_check_recovery()
md: Don't ignore suspended array in md_check_recovery()
md: Fix missing release of 'active_io' for flush
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- Fix dirty tracking bitmap collection when using reporting bitmaps
that are not neatly aligned to u64's or match the IO page table radix
tree layout.
- Add self tests to cover the cases that were found to be broken.
- Add missing enforcement of invalidation type in the uapi.
- Fix selftest config generation
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
selftests/iommu: fix the config fragment
iommufd: Reject non-zero data_type if no data_len is provided
iommufd/iova_bitmap: Consider page offset for the pages to be pinned
iommufd/selftest: Add mock IO hugepages tests
iommufd/selftest: Hugepage mock domain support
iommufd/selftest: Refactor mock_domain_read_and_clear_dirty()
iommufd/selftest: Refactor dirty bitmap tests
iommufd/iova_bitmap: Handle recording beyond the mapped pages
iommufd/selftest: Test u64 unaligned bitmaps
iommufd/iova_bitmap: Switch iova_bitmap::bitmap to an u8 array
iommufd/iova_bitmap: Bounds check mapped::pages access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Regression fixes:
- Fix INT0002 vGPIO events no longer working after 6.8 ACPI SCI
changes
- AMD-PMF: Fix laptops (e.g. Framework 13 AMD) hanging on suspend
- x86-android-tablets: Fix touchscreen no longer working on Lenovo
Yogabook
- x86-android-tablets: Fix serdev instantiation regression
- intel-vbtn: Fix ThinkPad X1 Tablet Gen2 no longer suspending
Bug fixes:
- think-lmi: Fix changing BIOS settings on Lenovo workstations
- touchscreen_dmi: Fix Hi8 Air touchscreen data sometimes missing
- AMD-PMF: Fix Smart PC support not working after suspend/resume
Other misc small fixes"
* tag 'platform-drivers-x86-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Only update profile if successfully converted
platform/x86: intel-vbtn: Stop calling "VBDL" from notify_handler
platform/x86: x86-android-tablets: Fix acer_b1_750_goodix_gpios name
platform/x86: x86-android-tablets: Fix serdev instantiation no longer working
platform/x86: Add new get_serdev_controller() helper
platform/x86: x86-android-tablets: Fix keyboard touchscreen on Lenovo Yogabook1 X90
platform/x86/amd/pmf: Fix a potential race with policy binary sideload
platform/x86/amd/pmf: Fixup error handling for amd_pmf_init_smart_pc()
platform/x86/amd/pmf: Add debugging message for missing policy data
platform/x86/amd/pmf: Fix a suspend hang on Framework 13
platform/x86/amd/pmf: Fix TEE enact command failure after suspend and resume
platform/x86/amd/pmf: Remove smart_pc_status enum
platform/x86: touchscreen_dmi: Consolidate Goodix upside-down touchscreen data
platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI names
platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()
platform/x86: think-lmi: Fix password opcode ordering for workstations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Here are some Samsung clk driver fixes I've been sitting on for far
too long.
They fix the bindings and clk driver for the Google GS101 SoC"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: clk-gs101: comply with the new dt cmu_misc clock names
dt-bindings: clock: gs101: rename cmu_misc clock-names
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a memory leak in cachefiles
- Restrict aio cancellations to I/O submitted through the aio
interfaces as this is otherwise causing issues for I/O submitted
via io_uring
- Increase buffer for afs volume status to avoid overflow
- Fix a missing zero-length check in unbuffered writes in the
netfs library. If generic_write_checks() returns zero make
netfs_unbuffered_write_iter() return right away
- Prevent a leak in i_dio_count caused by netfs_begin_read() operating
past i_size. It will return early and leave i_dio_count incremented
- Account for ipv4 addresses as well as ipv6 addresses when processing
incoming callbacks in afs
* tag 'vfs-6.8-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
afs: Increase buffer size in afs_update_volume_status()
afs: Fix ignored callbacks over ipv4
cachefiles: fix memory leak in cachefiles_add_cache()
netfs: Fix missing zero-length check in unbuffered write
netfs: Fix i_dio_count leak on DIO read past i_size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path
is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after
check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in
devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall page through
bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests"
* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
l2tp: pass correct message length to ip6_append_data
net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
selftests: ioam: refactoring to align with the fix
Fix write to cloned skb in ipv6_hop_ioam()
phonet/pep: fix racy skb_queue_empty() use
phonet: take correct lock to peek at the RX queue
net: sparx5: Add spinlock for frame transmission from CPU
net/sched: flower: Add lock protection when remove filter handle
devlink: fix port dump cmd type
net: stmmac: Fix EST offset for dwmac 5.10
tools: ynl: don't leak mcast_groups on init error
tools: ynl: make sure we always pass yarg to mnl_cb_run
net: mctp: put sock on tag allocation failure
netfilter: nf_tables: use kzalloc for hook allocation
netfilter: nf_tables: register hooks last when adding new chain/flowtable
netfilter: nft_flow_offload: release dst in case direct xmit path is used
netfilter: nft_flow_offload: reset dst in route object after setting up flow
netfilter: nf_tables: set dormant flag on hook register failure
selftests: tls: add test for peeking past a record of a different type
selftests: tls: add test for merging of same-type control messages
...
|
|
Inside tegra_fb_create(), drm_gem_object_lookup() increments ref count of
the found object. But if the following size check fails then the last
found object's ref count should be put there as the unreferencing loop
can't detect this situation.
Found by Linux Verification Center (linuxtesting.org).
Fixes: de2ba664c30f ("gpu: host1x: drm: Add memory manager and fb")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231215093356.12067-1-pchelkin@ispras.ru
|
|
Don't set power state flag when system enter runtime suspend,
or it may cause runtime resume failure issue.
Fixes: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend")
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Use i2c adapter when there isn't aux_mode in dc_link to fix a
null-pointer derefence that happens when running
igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector
detected as below:
[ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0
[ +0.000010] #PF: supervisor read access in kernel mode
[ +0.000005] #PF: error_code(0x0000) - not-present page
[ +0.000004] PGD 0 P4D 0
[ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152
[ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021
[ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100
[ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16
[ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246
[ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080
[ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0
[ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980
[ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080
[ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f
[ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000
[ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0
[ +0.000003] PKRU: 55555554
[ +0.000003] Call Trace:
[ +0.000006] <TASK>
[ +0.000006] ? __die+0x23/0x70
[ +0.000011] ? page_fault_oops+0x17d/0x4c0
[ +0.000008] ? preempt_count_add+0x6e/0xa0
[ +0.000008] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000011] ? exc_page_fault+0x7f/0x180
[ +0.000009] ? asm_exc_page_fault+0x26/0x30
[ +0.000013] ? i2c_transfer+0xd/0x100
[ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm]
[ +0.000067] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm]
[ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[ +0.000042] edid_block_read+0x3b/0xd0 [drm]
[ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm]
[ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm]
[ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm]
[ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu]
[ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper]
[ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper]
[ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu]
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper]
[ +0.000000] status_store+0xb2/0x1f0 [drm]
[ +0.000000] kernfs_fop_write_iter+0x136/0x1d0
[ +0.000000] vfs_write+0x24d/0x440
[ +0.000000] ksys_write+0x6f/0xf0
[ +0.000000] do_syscall_64+0x60/0xc0
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40
[ +0.000000] ? srso_alias_return_thunk+0x5/0x7f
[ +0.000000] ? do_syscall_64+0x6c/0xc0
[ +0.000000] ? do_syscall_64+0x6c/0xc0
[ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ +0.000000] RIP: 0033:0x7f9ad46b4b00
[ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89
[ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00
[ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009
[ +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000
[ +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417
[ +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001
[ +0.000000] </TASK>
[ +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco
[ +0.000000] snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4
[ +0.000000] usb_common crct10dif_common video wmi
[ +0.000000] CR2: 00000000000004c0
[ +0.000000] ---[ end trace 0000000000000000 ]---
Fixes: 0e859faf8670 ("drm/amd/display: Remove unwanted drm edid references")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
After destroying dmub_srv, the memory associated with it is
not freed, causing a memory leak:
unreferenced object 0xffff896302b45800 (size 1024):
comm "(udev-worker)", pid 222, jiffies 4294894636
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 6265fd77):
[<ffffffff993495ed>] kmalloc_trace+0x29d/0x340
[<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu]
[<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu]
[<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu]
[<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu]
[<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu]
[<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90
[<ffffffff996918a3>] pci_device_probe+0xc3/0x230
[<ffffffff99805872>] really_probe+0xe2/0x480
[<ffffffff99805c98>] __driver_probe_device+0x78/0x160
[<ffffffff99805daf>] driver_probe_device+0x1f/0x90
[<ffffffff9980601e>] __driver_attach+0xce/0x1c0
[<ffffffff99803170>] bus_for_each_dev+0x70/0xc0
[<ffffffff99804822>] bus_add_driver+0x112/0x210
[<ffffffff99807245>] driver_register+0x55/0x100
[<ffffffff990012d1>] do_one_initcall+0x41/0x300
Fix this by freeing dmub_srv after destroying it.
Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Currently there is an error while translating input clock sates into
output clock states. The highest fclk setting from output sates is
being dropped because of this error.
[How]
For dcn35 and dcn351, make output_states equal to input states.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes potential null pointer dereference warnings in the
dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up()
functions.
In both functions, the 'dc_dmub_srv' variable was being dereferenced
before it was checked for null. This could lead to a null pointer
dereference if 'dc_dmub_srv' is null. The fix is to check if
'dc_dmub_srv' is null before dereferencing it.
Thus moving the null checks for 'dc_dmub_srv' to the beginning of the
functions to ensure that 'dc_dmub_srv' is not null when it is
dereferenced.
Found by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128)
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164)
Fixes: 028bac583449 ("drm/amd/display: decouple dmcub execution to reduce lock granularity")
Fixes: 65138eb72e1f ("drm/amd/display: Add DCN35 DMUB")
Cc: JinZe.Xu <jinze.xu@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Josip Pavic <josip.pavic@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
- While working on the ring buffer I noticed that the counter used for
knowing where the end of the data is on a sub-buffer was not a full
"int" but just 20 bits. It was masked out to 0xfffff.
With the new code that allows the user to change the size of the
sub-buffer, it is theoretically possible to ask for a size bigger
than 2^20. If that happens, unexpected results may occur as there's
no code checking if the counter overflowed the 20 bits of the write
mask. There are other checks to make sure events fit in the
sub-buffer, but if the sub-buffer itself is too big, that is not
checked.
Add a check in the resize of the sub-buffer to make sure that it
never goes beyond the size of the counter that holds how much data is
on it.
* tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not let subbuf be bigger than write mask
|
|
[Why]
The old asic only have 1 pwrseq hw.
We don't need to map the diginst to pwrseq inst in old asic.
[How]
1. Only mapping dig to pwrseq for new asic.
2. Move mapping function into dcn specific panel control component
Cc: Stable <stable@vger.kernel.org> # v6.6+
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3122
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:
1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.
2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence
[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.
Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()
Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The s390 common I/O layer (CIO) returns an unexpected -EBUSY return code
when drivers try to start I/O while a path-verification (PV) process is
pending. This can lead to failed device initialization attempts with
symptoms like broken network connectivity after boot.
Fix this by replacing the -EBUSY return code with a deferred condition
code 1 reply to make path-verification handling consistent from a
driver's point of view.
The problem can be reproduced semi-regularly using the following process,
while repeating steps 2-3 as necessary (example assumes an OSA device
with bus-IDs 0.0.a000-0.0.a002 on CHPID 0.02):
1. echo 0.0.a000,0.0.a001,0.0.a002 >/sys/bus/ccwgroup/drivers/qeth/group
2. echo 0 > /sys/bus/ccwgroup/devices/0.0.a000/online
3. echo 1 > /sys/bus/ccwgroup/devices/0.0.a000/online ; \
echo on > /sys/devices/css0/chp0.02/status
Background information:
The common I/O layer starts path-verification I/Os when it receives
indications about changes in a device path's availability. This occurs
for example when hardware events indicate a change in channel-path
status, or when a manual operation such as a CHPID vary or configure
operation is performed.
If a driver attempts to start I/O while a PV is running, CIO reports a
successful I/O start (ccw_device_start() return code 0). Then, after
completion of PV, CIO synthesizes an interrupt response that indicates
an asynchronous status condition that prevented the start of the I/O
(deferred condition code 1).
If a PV indication arrives while a device is busy with driver-owned I/O,
PV is delayed until after I/O completion was reported to the driver's
interrupt handler. To ensure that PV can be started eventually, CIO
reports a device busy condition (ccw_device_start() return code -EBUSY)
if a driver tries to start another I/O while PV is pending.
In some cases this -EBUSY return code causes device drivers to consider
a device not operational, resulting in failed device initialization.
Note: The code that introduced the problem was added in 2003. Symptoms
started appearing with the following CIO commit that causes a PV
indication when a device is removed from the cio_ignore list after the
associated parent subchannel device was probed, but before online
processing of the CCW device has started:
2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
During boot, the cio_ignore list is modified by the cio_ignore dracut
module [1] as well as Linux vendor-specific systemd service scripts[2].
When combined, this commit and boot scripts cause a frequent occurrence
of the problem during boot.
[1] https://github.com/dracutdevs/dracut/tree/master/modules.d/81cio_ignore
[2] https://github.com/SUSE/s390-tools/blob/master/cio_ignore.service
Cc: stable@vger.kernel.org # v5.15+
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Tested-By: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
CONFIG_DRM_RCAR_VSP is related to R-Car and not related to RZ/G2L
specific. This caused the below build issue. Fix this errors by replacing
CONFIG_DRM_RCAR_VSP->CONFIG_VIDEO_RENESAS_VSP1. While at it, use
IS_ENABLED() macro.
drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c:47:6: error: redefinition of 'rzg2l_du_vsp_enable'
47 | void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc)
| ^~~~~~~~~~~~~~~~~~~
In file included from drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h:18,
from drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c:30:
drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h:72:20: note: previous definition of 'rzg2l_du_vsp_enable' with type 'void(struct rzg2l_du_crtc *)'
72 | static inline void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc) { };
| ^~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c:61:6: error: redefinition of 'rzg2l_du_vsp_disable'
61 | void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc)
| ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h:73:20: note: previous definition of 'rzg2l_du_vsp_disable' with type 'void(struct rzg2l_du_crtc *)'
73 | static inline void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc) { };
| ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c:66:6: error: redefinition of 'rzg2l_du_vsp_atomic_flush'
66 | void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h:74:20: note: previous definition of 'rzg2l_du_vsp_atomic_flush' with type 'void(struct rzg2l_du_crtc *)'
74 | static inline void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc) { };
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c:76:19: error: redefinition of 'rzg2l_du_vsp_get_drm_plane'
76 | struct drm_plane *rzg2l_du_vsp_get_drm_plane(struct rzg2l_du_crtc *crtc,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h:75:33: note: previous definition of 'rzg2l_du_vsp_get_drm_plane' with type 'struct drm_plane *(struct rzg2l_du_crtc *, unsigned int)'
75 | static inline struct drm_plane *rzg2l_du_vsp_get_drm_plane(struct rzg2l_du_crtc *crtc,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c:302:5: error: redefinition of 'rzg2l_du_vsp_init'
302 | int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np,
| ^~~~~~~~~~~~~~~~~
drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h:66:19: note: previous definition of 'rzg2l_du_vsp_init' with type 'int(struct rzg2l_du_vsp *, struct device_node *, unsigned int)'
66 | static inline int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np,
| ^~~~~~~~~~~~~~~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20240222124610.383e1ce3@canb.auug.org.au/T/#u
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 768e9e61b3b9 ("drm: renesas: Add RZ/G2L DU Support")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222112643.110326-1-biju.das.jz@bp.renesas.com
|
|
The config fragment doesn't follow the correct format to enable those
config options which make the config options getting missed while
merging with other configs.
➜ merge_config.sh -m .config tools/testing/selftests/iommu/config
Using .config as base
Merging tools/testing/selftests/iommu/config
➜ make olddefconfig
.config:5295:warning: unexpected data: CONFIG_IOMMUFD
.config:5296:warning: unexpected data: CONFIG_IOMMUFD_TEST
While at it, add CONFIG_FAULT_INJECTION as well which is needed for
CONFIG_IOMMUFD_TEST. If CONFIG_FAULT_INJECTION isn't present in base
config (such as x86 defconfig), CONFIG_IOMMUFD_TEST doesn't get enabled.
Fixes: 57f0988706fe ("iommufd: Add a selftest")
Link: https://lore.kernel.org/r/20240222074934.71380-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|