summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-07-21usb: cdc-wdm: fix build error when CONFIG_WWAN_CORE is not setWei Yongjun
Gcc report build error as following when CONFIG_WWAN_CORE is not set: x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_disconnect': cdc-wdm.c:(.text+0xb2a): undefined reference to `wwan_remove_port' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_in_callback': cdc-wdm.c:(.text+0xf23): undefined reference to `wwan_port_rx' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_stop': cdc-wdm.c:(.text+0x127d): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx': cdc-wdm.c:(.text+0x12d9): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x13c1): undefined reference to `wwan_port_txoff' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_start': cdc-wdm.c:(.text+0x13e0): undefined reference to `wwan_port_get_drvdata' x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x1431): undefined reference to `wwan_port_txon' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx_complete': cdc-wdm.c:(.text+0x14a4): undefined reference to `wwan_port_txon' x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_create.cold': cdc-wdm.c:(.text.unlikely+0x209): undefined reference to `wwan_create_port' Using CONFIG_WWAN_CORE instead of CONFIG_WWAN to avoid build error. Fixes: cac6fb015f71 ("usb: class: cdc-wdm: WWAN framework integration") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210521021010.2490930-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21nvme: fix nvme_setup_command metadata trace eventKeith Busch
The metadata address is set after the trace event, so the trace is not capturing anything useful. Rather than logging the memory address, it's useful to know if the command carries a metadata payload, so change the trace event to log that true/false state instead. Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-07-21nvme: fix refcounting imbalance when all paths are downHannes Reinecke
When the last path to a ns_head drops the current code removes the ns_head from the subsystem list, but will only delete the disk itself if the last reference to the ns_head drops. This is causing an refcounting imbalance eg when applications have a reference to the disk, as then they'll never get notified that the disk is in fact dead. This patch moves the call 'del_gendisk' into nvme_mpath_check_last_path(), ensuring that the disk can be properly removed and applications get the appropriate notifications. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-07-21nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTINGZhihao Cheng
Followling process: nvme_probe nvme_reset_ctrl nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING) queue_work(nvme_reset_wq, &ctrl->reset_work) --------------> nvme_remove nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING) worker_thread process_one_work nvme_reset_work WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING) , which will trigger WARN_ON in nvme_reset_work(): [ 127.534298] WARNING: CPU: 0 PID: 139 at drivers/nvme/host/pci.c:2594 [ 127.536161] CPU: 0 PID: 139 Comm: kworker/u8:7 Not tainted 5.13.0 [ 127.552518] Call Trace: [ 127.552840] ? kvm_sched_clock_read+0x25/0x40 [ 127.553936] ? native_send_call_func_single_ipi+0x1c/0x30 [ 127.555117] ? send_call_function_single_ipi+0x9b/0x130 [ 127.556263] ? __smp_call_single_queue+0x48/0x60 [ 127.557278] ? ttwu_queue_wakelist+0xfa/0x1c0 [ 127.558231] ? try_to_wake_up+0x265/0x9d0 [ 127.559120] ? ext4_end_io_rsv_work+0x160/0x290 [ 127.560118] process_one_work+0x28c/0x640 [ 127.561002] worker_thread+0x39a/0x700 [ 127.561833] ? rescuer_thread+0x580/0x580 [ 127.562714] kthread+0x18c/0x1e0 [ 127.563444] ? set_kthread_struct+0x70/0x70 [ 127.564347] ret_from_fork+0x1f/0x30 The preceding problem can be easily reproduced by executing following script (based on blktests suite): test() { pdev="$(_get_pci_dev_from_blkdev)" sysfs="/sys/bus/pci/devices/${pdev}" for ((i = 0; i < 10; i++)); do echo 1 > "$sysfs/remove" echo 1 > /sys/bus/pci/rescan done } Since the device ctrl could be updated as an non-RESETTING state by repeating probe/remove in userspace (which is a normal situation), we can replace stack dumping WARN_ON with a warnning message. Fixes: 82b057caefaff ("nvme-pci: fix multiple ctrl removal schedulin") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
2021-07-21Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"Greg Kroah-Hartman
This reverts commit eb9b7bfd5954f5f6ac4d57313541dd0294660aad as it breaks working userspace implementations (i.e. Android systems) The device node name here is part of configfs, so it is a user-visable api that can not be changed. Reported-by: John Stultz <john.stultz@linaro.org> Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/CALAqxLX_FNvFndEDWtGbFPjSzuAbfqxQE07diBJFZtftwEJX5A@mail.gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.Minas Harutyunyan
Sending zero length packet in DDMA mode perform by DMA descriptor by setting SP (short packet) flag. For DDMA in function dwc2_hsotg_complete_in() does not need to send zlp. Tested by USBCV MSC tests. Fixes: f71b5e2533de ("usb: dwc2: gadget: fix zero length packet transfers") Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/967bad78c55dd2db1c19714eee3d0a17cf99d74a.1626777738.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: dwc2: Skip clock gating on Samsung SoCsMarek Szyprowski
Commit 0112b7ce68ea ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.") changed the way the driver handles power down modes in a such way that it uses clock gating when no other power down mode is available. This however doesn't work well on the DWC2 implementation used on the Samsung SoCs. When a clock gating is enabled, system hangs. It looks that the proper clock gating requires some additional glue code in the shared USB2 PHY and/or Samsung glue code for the DWC2. To restore driver operation on the Samsung SoCs simply skip enabling clock gating mode until one finds what is really needed to make it working reliably. Fixes: 0112b7ce68ea ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.") Cc: stable <stable@vger.kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20210716050127.4406-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()Yoshihiro Shimoda
This driver has a potential issue which this driver is possible to cause superfluous irqs after usb_pkt_pop() is called. So, after the commit 3af32605289e ("usb: renesas_usbhs: fix error return code of usbhsf_pkt_handler()") had been applied, we could observe the following error happened when we used g_audio. renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22 To fix the issue, disable the tx or rx interrupt in usb_pkt_pop(). Fixes: 2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()") Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210624122039.596528-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode.Minas Harutyunyan
Because of dwc2_hsotg_ep_stop_xfr() function uses poll mode, first need to mask GINTSTS_GOUTNAKEFF interrupt. In Slave mode GINTSTS_GOUTNAKEFF interrupt will be aserted only after pop OUT NAK status packet from RxFIFO. In dwc2_hsotg_ep_sethalt() function before setting DCTL_SGOUTNAK need to unmask GOUTNAKEFF interrupt. Tested by USBCV CH9 and MSC tests set in Slave, BDMA and DDMA. All tests are passed. Fixes: a4f827714539a ("usb: dwc2: gadget: Disable enabled HW endpoint in dwc2_hsotg_ep_disable") Fixes: 6070636c4918c ("usb: dwc2: Fix Stalling a Non-Isochronous OUT EP") Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/e17fad802bbcaf879e1ed6745030993abb93baf8.1626152924.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: phy: Fix page fault from usb_phy_ueventArtur Petrosyan
When the dwc2 platform device is removed, it unregisters the generic phy. usb_remove_phy() is called and the dwc2 usb_phy is removed from the "phy_list", but the uevent may still attempt to get the usb_phy from the list, resulting in a page fault bug. Currently we can't access the usb_phy from the "phy_list" after the device is removed. As a fix check to make sure that we can get the usb_phy before moving forward with the uevent. [ 84.949345] BUG: unable to handle page fault for address:00000007935688d8 [ 84.949349] #PF: supervisor read access in kernel mode [ 84.949351] #PF: error_code(0x0000) - not-present page [ 84.949353] PGD 0 P4D 0 [ 84.949356] Oops: 0000 [#1] SMP PTI [ 84.949360] CPU: 2 PID: 2081 Comm: rmmod Not tainted 5.13.0-rc4-snps-16547-ga8534cb092d7-dirty #32 [ 84.949363] Hardware name: Hewlett-Packard HP Z400 Workstation/0B4Ch, BIOS 786G3 v03.54 11/02/2011 [ 84.949365] RIP: 0010:usb_phy_uevent+0x99/0x121 [ 84.949372] Code: 8d 83 f8 00 00 00 48 3d b0 12 22 94 74 05 4c 3b 23 75 5b 8b 83 9c 00 00 00 be 32 00 00 00 48 8d 7c 24 04 48 c7 c2 d4 5d 7b 93 <48> 8b 0c c5 e0 88 56 93 e8 0f 63 8a ff 8b 83 98 00 00 00 be 32 00 [ 84.949375] RSP: 0018:ffffa46bc0f2fc70 EFLAGS: 00010246 [ 84.949378] RAX: 00000000ffffffff RBX: ffffffff942211b8 RCX: 0000000000000027 [ 84.949380] RDX: ffffffff937b5dd4 RSI: 0000000000000032 RDI: ffffa46bc0f2fc74 [ 84.949383] RBP: ffff94a306613000 R08: 0000000000000000 R09: 00000000fffeffff [ 84.949385] R10: ffffa46bc0f2faa8 R11: ffffa46bc0f2faa0 R12: ffff94a30186d410 [ 84.949387] R13: ffff94a32d188a80 R14: ffff94a30029f960 R15: ffffffff93522dd0 [ 84.949389] FS: 00007efdbd417540(0000) GS:ffff94a513a80000(0000) knlGS:0000000000000000 [ 84.949392] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 84.949394] CR2: 00000007935688d8 CR3: 0000000165606000 CR4: 00000000000006e0 [ 84.949396] Call Trace: [ 84.949401] dev_uevent+0x190/0x1ad [ 84.949408] kobject_uevent_env+0x18e/0x46c [ 84.949414] device_release_driver_internal+0x17f/0x18e [ 84.949418] bus_remove_device+0xd3/0xe5 [ 84.949421] device_del+0x1c3/0x31d [ 84.949425] ? kobject_put+0x97/0xa8 [ 84.949428] platform_device_del+0x1c/0x63 [ 84.949432] platform_device_unregister+0xa/0x11 [ 84.949436] dwc2_pci_remove+0x1e/0x2c [dwc2_pci] [ 84.949440] pci_device_remove+0x31/0x81 [ 84.949445] device_release_driver_internal+0xea/0x18e [ 84.949448] driver_detach+0x68/0x72 [ 84.949450] bus_remove_driver+0x63/0x82 [ 84.949453] pci_unregister_driver+0x1a/0x75 [ 84.949457] __do_sys_delete_module+0x149/0x1e9 [ 84.949462] ? task_work_run+0x64/0x6e [ 84.949465] ? exit_to_user_mode_prepare+0xd4/0x10d [ 84.949471] do_syscall_64+0x5d/0x70 [ 84.949475] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 84.949480] RIP: 0033:0x7efdbd563bcb [ 84.949482] Code: 73 01 c3 48 8b 0d c5 82 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 95 82 0c 00 f7 d8 64 89 01 48 [ 84.949485] RSP: 002b:00007ffe944d7d98 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 84.949489] RAX: ffffffffffffffda RBX: 00005651072eb700 RCX: 00007efdbd563bcb [ 84.949491] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005651072eb768 [ 84.949493] RBP: 00007ffe944d7df8 R08: 0000000000000000 R09: 0000000000000000 [ 84.949495] R10: 00007efdbd5dfac0 R11: 0000000000000206 R12: 00007ffe944d7fd0 [ 84.949497] R13: 00007ffe944d8610 R14: 00005651072eb2a0 R15: 00005651072eb700 [ 84.949500] Modules linked in: uas configfs dwc2_pci(-) phy_generic fuse crc32c_intel [last unloaded: udc_core] [ 84.949508] CR2: 00000007935688d8 [ 84.949510] ---[ end trace e40c871ca3e4dc9e ]--- [ 84.949512] RIP: 0010:usb_phy_uevent+0x99/0x121 Fixes: a8534cb092d7 ("usb: phy: introduce usb_phy device type with its own uevent handler") Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20210710092247.D7AFEA005D@mailhost.synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: xhci: avoid renesas_usb_fw.mem when it's unusableGreg Thelen
Commit a66d21d7dba8 ("usb: xhci: Add support for Renesas controller with memory") added renesas_usb_fw.mem firmware reference to xhci-pci. Thus modinfo indicates xhci-pci.ko has "firmware: renesas_usb_fw.mem". But the firmware is only actually used with CONFIG_USB_XHCI_PCI_RENESAS. An unusable firmware reference can trigger safety checkers which look for drivers with unmet firmware dependencies. Avoid referring to renesas_usb_fw.mem in circumstances when it cannot be loaded (when CONFIG_USB_XHCI_PCI_RENESAS isn't set). Fixes: a66d21d7dba8 ("usb: xhci: Add support for Renesas controller with memory") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Thelen <gthelen@google.com> Link: https://lore.kernel.org/r/20210702071224.3673568-1-gthelen@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: gadget: u_serial: remove WARN_ON on null portColin Ian King
Loading and then unloading module g_dpgp on a VM that does not support the driver currently throws a WARN_ON message because the port has not been initialized. Removing an unused driver is a valid use-case and the WARN_ON kernel warning is a bit excessive, so remove it. Cleans up: [27654.638698] ------------[ cut here ]------------ [27654.638705] WARNING: CPU: 6 PID: 2956336 at drivers/usb/gadget/function/u_serial.c:1201 gserial_free_line+0x7c/0x90 [u_serial] [27654.638728] Modules linked in: g_dbgp(-) u_serial usb_f_tcm target_core_mod libcomposite udc_core vmw_vmci mcb i2c_nforce2 i2c_amd756 nfit cx8800 videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 cx88xx tveeprom videobuf2_common videodev mc ccp hid_generic hid intel_ishtp cros_ec mc13xxx_core vfio_mdev mdev i915 i2c_algo_bit kvm ppdev parport zatm eni suni uPD98402 atm rio_scan binder_linux hwmon_vid video ipmi_devintf ipmi_msghandler zstd nls_utf8 decnet qrtr ns sctp ip6_udp_tunnel udp_tunnel fcrypt pcbc nhc_udp nhc_ipv6 nhc_routing nhc_mobility nhc_hop nhc_dest nhc_fragment 6lowpan ts_kmp dccp_ipv6 dccp_ipv4 dccp snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq_dummy snd_seq snd_seq_device xen_front_pgdir_shbuf binfmt_misc nls_iso8859_1 dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common snd_hda_codec_generic ledtrig_audio snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd rapl soundcore joydev input_leds mac_hid serio_raw efi_pstore [27654.638880] qemu_fw_cfg sch_fq_codel msr virtio_rng autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear qxl drm_ttm_helper crct10dif_pclmul ttm drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops cec net_failover rc_core ahci psmouse drm libahci lpc_ich virtio_blk failover [last unloaded: u_ether] [27654.638949] CPU: 6 PID: 2956336 Comm: modprobe Tainted: P O 5.13.0-9-generic #9 [27654.638956] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [27654.638969] RIP: 0010:gserial_free_line+0x7c/0x90 [u_serial] [27654.638981] Code: 20 00 00 00 00 e8 74 1a ba c9 4c 89 e7 e8 8c fe ff ff 48 8b 3d 75 3b 00 00 44 89 f6 e8 3d 7c 69 c9 5b 41 5c 41 5d 41 5e 5d c3 <0f> 0b 4c 89 ef e8 4a 1a ba c9 5b 41 5c 41 5d 41 5e 5d c3 90 0f 1f [27654.638986] RSP: 0018:ffffba0b81403da0 EFLAGS: 00010246 [27654.638992] RAX: 0000000000000000 RBX: ffffffffc0eaf6a0 RCX: 0000000000000000 [27654.638996] RDX: ffff8e21c0cac8c0 RSI: 0000000000000006 RDI: ffffffffc0eaf6a0 [27654.639000] RBP: ffffba0b81403dc0 R08: ffffba0b81403de0 R09: fefefefefefefeff [27654.639003] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [27654.639006] R13: ffffffffc0eaf6a0 R14: 0000000000000000 R15: 0000000000000000 [27654.639010] FS: 00007faa1935e740(0000) GS:ffff8e223bd80000(0000) knlGS:0000000000000000 [27654.639015] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27654.639019] CR2: 00007ffc840cd4e8 CR3: 000000000e1ac006 CR4: 0000000000370ee0 [27654.639028] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [27654.639031] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [27654.639035] Call Trace: [27654.639044] dbgp_exit+0x1c/0xa1a [g_dbgp] [27654.639054] __do_sys_delete_module.constprop.0+0x144/0x260 [27654.639066] ? call_rcu+0xe/0x10 [27654.639073] __x64_sys_delete_module+0x12/0x20 [27654.639081] do_syscall_64+0x61/0xb0 [27654.639092] ? exit_to_user_mode_loop+0xec/0x160 [27654.639098] ? exit_to_user_mode_prepare+0x37/0xb0 [27654.639104] ? syscall_exit_to_user_mode+0x27/0x50 [27654.639110] ? __x64_sys_close+0x12/0x40 [27654.639119] ? do_syscall_64+0x6e/0xb0 [27654.639126] ? exit_to_user_mode_prepare+0x37/0xb0 [27654.639132] ? syscall_exit_to_user_mode+0x27/0x50 [27654.639137] ? __x64_sys_newfstatat+0x1e/0x20 [27654.639146] ? do_syscall_64+0x6e/0xb0 [27654.639154] ? exc_page_fault+0x8f/0x170 [27654.639159] ? asm_exc_page_fault+0x8/0x30 [27654.639166] entry_SYSCALL_64_after_hwframe+0x44/0xae [27654.639173] RIP: 0033:0x7faa194a4b2b [27654.639179] Code: 73 01 c3 48 8b 0d 3d 73 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0d 73 0c 00 f7 d8 64 89 01 48 [27654.639185] RSP: 002b:00007ffc840d0578 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [27654.639191] RAX: ffffffffffffffda RBX: 000056060f9f4e70 RCX: 00007faa194a4b2b [27654.639194] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000056060f9f4ed8 [27654.639197] RBP: 000056060f9f4e70 R08: 0000000000000000 R09: 0000000000000000 [27654.639200] R10: 00007faa1951eac0 R11: 0000000000000206 R12: 000056060f9f4ed8 [27654.639203] R13: 0000000000000000 R14: 000056060f9f4ed8 R15: 00007ffc840d06c8 [27654.639219] ---[ end trace 8dd0ea0bb32ce94a ]--- Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210701144305.110078-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: dwc3: avoid NULL access of usb_gadget_driverLinyu Yuan
we found crash in dwc3_disconnect_gadget(), it is because dwc->gadget_driver become NULL before async access. 7dc0c55e9f30 ('USB: UDC core: Add udc_async_callbacks gadget op') suggest a common way to avoid such kind of issue. this change implment the callback in dwc3 and change related functions which have callback to usb gadget driver. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org> Link: https://lore.kernel.org/r/20210629015118.7944-1-linyyuan@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: max-3421: Prevent corruption of freed memoryMark Tomlinson
The MAX-3421 USB driver remembers the state of the USB toggles for a device/endpoint. To save SPI writes, this was only done when a new device/endpoint was being used. Unfortunately, if the old device was removed, this would cause writes to freed memory. To fix this, a simpler scheme is used. The toggles are read from hardware when a URB is completed, and the toggles are always written to hardware when any URB transaction is started. This will cause a few more SPI transactions, but no causes kernel panics. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: gadget: Fix Unbalanced pm_runtime_enable in tegra_xudc_probeZhang Qilong
Add missing pm_runtime_disable() when probe error out. It could avoid pm_runtime implementation complains when removing and probing again the driver. Fixes: 49db427232fe ("usb: gadget: Add UDC driver for tegra XUSB device mode controller") Cc: stable <stable@vger.kernel.org> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20210618141441.107817-1-zhangqilong3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21MAINTAINERS: repair reference in USB IP DRIVER FOR HISILICON KIRIN 970Lukas Bulwahn
Commit 8de6b7edd493 ("phy: phy-hi3670-usb3: move driver from staging into phy") moves phy-hi3670-usb3.c from ./drivers/staging/hikey9xx/ to ./drivers/phy/hisilicon/, but the new file entry in MAINTAINERS refers to ./drivers/phy/hisilicon/phy-kirin970-usb3.c. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: drivers/phy/hisilicon/phy-kirin970-usb3.c Repair the file entry by referring to the right location. Fixes: 8de6b7edd493 ("phy: phy-hi3670-usb3: move driver from staging into phy") Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20210701093903.28733-1-lukas.bulwahn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: typec: stusb160x: Don't block probing of consumer of "connector" nodesAmelie Delaunay
Similar as with tcpm this patch lets fw_devlink know not to wait on the fwnode to be populated as a struct device. Without this patch, USB functionality can be broken on some previously supported boards. Fixes: 28ec344bb891 ("usb: typec: tcpm: Don't block probing of consumers of "connector" nodes") Cc: stable <stable@vger.kernel.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210716120718.20398-3-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: typec: stusb160x: register role switch before interrupt registrationAmelie Delaunay
During interrupt registration, attach state is checked. If attached, then the Type-C state is updated with typec_set_xxx functions and role switch is set with usb_role_switch_set_role(). If the usb_role_switch parameter is error or null, the function simply returns 0. So, to update usb_role_switch role if a device is attached before the irq is registered, usb_role_switch must be registered before irq registration. Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family") Cc: stable <stable@vger.kernel.org> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20210716120718.20398-2-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UASJulian Sikorski
LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates errors like: [ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN [ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00 [ 1151.588594] scsi host14: uas_eh_device_reset_handler start [ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 1151.741398] scsi host14: uas_eh_device_reset_handler success [ 1181.785534] scsi host14: uas_eh_device_reset_handler start Signed-off-by: Julian Sikorski <belegdol+github@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210720171910.36497-1-belegdol+github@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: ehci: Prevent missed ehci interrupts with edge-triggered MSIDavid Jeffery
When MSI is used by the ehci-hcd driver, it can cause lost interrupts which results in EHCI only continuing to work due to a polling fallback. But the reliance of polling drastically reduces performance of any I/O through EHCI. Interrupts are lost as the EHCI interrupt handler does not safely handle edge-triggered interrupts. It fails to ensure all interrupt status bits are cleared, which works with level-triggered interrupts but not the edge-triggered interrupts typical from using MSI. To fix this problem, check if the driver may have raced with the hardware setting additional interrupt status bits and clear status until it is in a stable state. Fixes: 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices") Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: David Jeffery <djeffery@redhat.com> Link: https://lore.kernel.org/r/20210715213744.GA44506@redhat Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: hub: Disable USB 3 device initiated lpm if exit latency is too highMathias Nyman
The device initiated link power management U1/U2 states should not be enabled in case the system exit latency plus one bus interval (125us) is greater than the shortest service interval of any periodic endpoint. This is the case for both U1 and U2 sytstem exit latencies and link states. See USB 3.2 section 9.4.9 "Set Feature" for more details Note, before this patch the host and device initiated U1/U2 lpm states were both enabled with lpm. After this patch it's possible to end up with only host inititated U1/U2 lpm in case the exit latencies won't allow device initiated lpm. If this case we still want to set the udev->usb3_lpm_ux_enabled flag so that sysfs users can see the link may go to U1/U2. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210715150122.1995966-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: hub: Fix link power management max exit latency (MEL) calculationsMathias Nyman
Maximum Exit Latency (MEL) value is used by host to know how much in advance it needs to start waking up a U1/U2 suspended link in order to service a periodic transfer in time. Current MEL calculation only includes the time to wake up the path from U1/U2 to U0. This is called tMEL1 in USB 3.1 section C 1.5.2 Total MEL = tMEL1 + tMEL2 +tMEL3 + tMEL4 which should additinally include: - tMEL2 which is the time it takes for PING message to reach device - tMEL3 time for device to process the PING and submit a PING_RESPONSE - tMEL4 time for PING_RESPONSE to traverse back upstream to host. Add the missing tMEL2, tMEL3 and tMEL4 to MEL calculation. Cc: <stable@kernel.org> # v3.5 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210715150122.1995966-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21usb: typec: tipd: Don't block probing of consumer of "connector" nodesMartin Kepplinger
Similar as with tcpm this patch lets fw_devlink know not to wait on the fwnode to be populated as a struct device. Without this patch, USB functionality can be broken on some previously supported boards. Fixes: 28ec344bb891 ("usb: typec: tcpm: Don't block probing of consumers of "connector" nodes") Cc: stable <stable@vger.kernel.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Link: https://lore.kernel.org/r/20210714061807.5737-1-martin.kepplinger@puri.sm Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21xhci: Fix lost USB 2 remote wakeMathias Nyman
There's a small window where a USB 2 remote wake may be left unhandled due to a race between hub thread and xhci port event interrupt handler. When the resume event is detected in the xhci interrupt handler it kicks the hub timer, which should move the port from resume to U0 once resume has been signalled for long enough. To keep the hub "thread" running we set a bus_state->resuming_ports flag. This flag makes sure hub timer function kicks itself. checking this flag was not properly protected by the spinlock. Flag was copied to a local variable before lock was taken. The local variable was then checked later with spinlock held. If interrupt is handled right after copying the flag to the local variable we end up stopping the hub thread before it can handle the USB 2 resume. CPU0 CPU1 (hub thread) (xhci event handler) xhci_hub_status_data() status = bus_state->resuming_ports; <Interrupt> handle_port_status() spin_lock() bus_state->resuming_ports = 1 set_flag(HCD_FLAG_POLL_RH) spin_unlock() spin_lock() if (!status) clear_flag(HCD_FLAG_POLL_RH) spin_unlock() Fix this by taking the lock a bit earlier so that it covers the resuming_ports flag copy in the hub thread Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210715150651.1996099-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21Revert "usb: renesas-xhci: Fix handling of unknown ROM state"Moritz Fischer
This reverts commit d143825baf15f204dac60acdf95e428182aa3374. Justin reports some of his systems now fail as result of this commit: xhci_hcd 0000:04:00.0: Direct firmware load for renesas_usb_fw.mem failed with error -2 xhci_hcd 0000:04:00.0: request_firmware failed: -2 xhci_hcd: probe of 0000:04:00.0 failed with error -2 The revert brings back the original issue the commit tried to solve but at least unbreaks existing systems relying on previous behavior. Cc: stable@vger.kernel.org Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Justin Forbes <jmforbes@linuxtx.org> Reported-by: Justin Forbes <jmforbes@linuxtx.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Fixes: d143825baf15 ("usb: renesas-xhci: Fix handling of unknown ROM state") Link: https://lore.kernel.org/r/20210719070519.41114-1-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21drm/ttm: Force re-init if ttm_global_init() failsJason Ekstrand
If we have a failure, decrement the reference count so that the next call to ttm_global_init() will actually do something instead of assume everything is all set up. Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Fixes: 62b53b37e4b1 ("drm/ttm: use a static ttm_bo_global instance") Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210720181357.2760720-5-jason@jlekstrand.net Signed-off-by: Christian König <christian.koenig@amd.com>
2021-07-20scsi: target: Fix NULL dereference on XCOPY completionDavid Disseldorp
CPU affinity control added with commit 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") makes target_complete_cmd() queue work on a CPU based on se_tpg->se_tpg_wwn->cmd_compl_affinity state. LIO's EXTENDED COPY worker is a special case in that read/write cmds are dispatched using the global xcopy_pt_tpg, which carries a NULL se_tpg_wwn pointer following initialization in target_xcopy_setup_pt(). The NULL xcopy_pt_tpg->se_tpg_wwn pointer is dereferenced on completion of any EXTENDED COPY initiated read/write cmds. E.g using the libiscsi SCSI.ExtendedCopy.Simple test: BUG: kernel NULL pointer dereference, address: 00000000000001a8 RIP: 0010:target_complete_cmd+0x9d/0x130 [target_core_mod] Call Trace: fd_execute_rw+0x148/0x42a [target_core_file] ? __dynamic_pr_debug+0xa7/0xe0 ? target_check_reservation+0x5b/0x940 [target_core_mod] __target_execute_cmd+0x1e/0x90 [target_core_mod] transport_generic_new_cmd+0x17c/0x330 [target_core_mod] target_xcopy_issue_pt_cmd+0x9/0x60 [target_core_mod] target_xcopy_read_source.isra.7+0x10b/0x1b0 [target_core_mod] ? target_check_fua+0x40/0x40 [target_core_mod] ? transport_complete_task_attr+0x130/0x130 [target_core_mod] target_xcopy_do_work+0x61f/0xc00 [target_core_mod] This fix makes target_complete_cmd() queue work on se_cmd->cpuid if se_tpg_wwn is NULL. Link: https://lore.kernel.org/r/20210720225522.26291-1-ddiss@suse.de Fixes: 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") Cc: Lee Duncan <lduncan@suse.com> Cc: Mike Christie <michael.christie@oracle.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-20ixgbe: Fix packet corruption due to missing DMA syncMarkus Boehme
When receiving a packet with multiple fragments, hardware may still touch the first fragment until the entire packet has been received. The driver therefore keeps the first fragment mapped for DMA until end of packet has been asserted, and delays its dma_sync call until then. The driver tries to fit multiple receive buffers on one page. When using 3K receive buffers (e.g. using Jumbo frames and legacy-rx is turned off/build_skb is being used) on an architecture with 4K pages, the driver allocates an order 1 compound page and uses one page per receive buffer. To determine the correct offset for a delayed DMA sync of the first fragment of a multi-fragment packet, the driver then cannot just use PAGE_MASK on the DMA address but has to construct a mask based on the actual size of the backing page. Using PAGE_MASK in the 3K RX buffer/4K page architecture configuration will always sync the first page of a compound page. With the SWIOTLB enabled this can lead to corrupted packets (zeroed out first fragment, re-used garbage from another packet) and various consequences, such as slow/stalling data transfers and connection resets. For example, testing on a link with MTU exceeding 3058 bytes on a host with SWIOTLB enabled (e.g. "iommu=soft swiotlb=262144,force") TCP transfers quickly fizzle out without this patch. Cc: stable@vger.kernel.org Fixes: 0c5661ecc5dd7 ("ixgbe: fix crash in build_skb Rx code path") Signed-off-by: Markus Boehme <markubo@amazon.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20i2c: mpc: Poll for MCFChris Packham
During some transfers the bus can still be busy when an interrupt is received. Commit 763778cd7926 ("i2c: mpc: Restore reread of I2C status register") attempted to address this by re-reading MPC_I2C_SR once but that just made it less likely to happen without actually preventing it. Instead of a single re-read, poll with a timeout so that the bus is given enough time to settle but a genuine stuck SCL is still noticed. Fixes: 1538d82f4647 ("i2c: mpc: Interrupt driven transfer") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-07-20Merge tag 'at24-fixes-for-v5.14' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current at24 fixes for v5.14 - fix a problem with repeating labels not getting a device id
2021-07-20s390: update defconfigsHeiko Carstens
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-20s390/cpumf: fix semicolon.cocci warningskernel test robot
arch/s390/kernel/perf_cpum_cf.c:748:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: a029a4eab39e ("s390/cpumf: Allow concurrent access for CPU Measurement Counter Facility") CC: Thomas Richter <tmricht@linux.ibm.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-20s390/boot: fix use of expolines in the DMA codeAlexander Egorenkov
The DMA code section of the decompressor must be compiled with expolines if Spectre V2 mitigation has been enabled for the decompressed kernel. This is required because although the decompressor's image contains the DMA code section, it is handed over to the decompressed kernel for use. Because the DMA code is already slow w/o expolines, use expolines always regardless whether the decompressed kernel is using them or not. This simplifies the DMA code by dropping the conditional compilation of expolines. Fixes: bf72630130c2 ("s390: use proper expoline sections for .dma code") Cc: <stable@vger.kernel.org> # 5.2 Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-20ceph: don't WARN if we're still opening a session to an MDSLuis Henriques
If MDSs aren't available while mounting a filesystem, the session state will transition from SESSION_OPENING to SESSION_CLOSING. And in that scenario check_session_state() will be called from delayed_work() and trigger this WARN. Avoid this by only WARNing after a session has already been established (i.e., the s_ttl will be different from 0). Fixes: 62575e270f66 ("ceph: check session state after bumping session->s_seq") Signed-off-by: Luis Henriques <lhenriques@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-07-20rbd: don't hold lock_rwsem while running_list is being drainedIlya Dryomov
Currently rbd_quiesce_lock() holds lock_rwsem for read while blocking on releasing_wait completion. On the I/O completion side, each image request also needs to take lock_rwsem for read. Because rw_semaphore implementation doesn't allow new readers after a writer has indicated interest in the lock, this can result in a deadlock if something that needs to take lock_rwsem for write gets involved. For example: 1. watch error occurs 2. rbd_watch_errcb() takes lock_rwsem for write, clears owner_cid and releases lock_rwsem 3. after reestablishing the watch, rbd_reregister_watch() takes lock_rwsem for write and calls rbd_reacquire_lock() 4. rbd_quiesce_lock() downgrades lock_rwsem to for read and blocks on releasing_wait until running_list becomes empty 5. another watch error occurs 6. rbd_watch_errcb() blocks trying to take lock_rwsem for write 7. no in-flight image request can complete and delete itself from running_list because lock_rwsem won't be granted anymore A similar scenario can occur with "lock has been acquired" and "lock has been released" notification handers which also take lock_rwsem for write to update owner_cid. We don't actually get anything useful from sitting on lock_rwsem in rbd_quiesce_lock() -- owner_cid updates certainly don't need to be synchronized with. In fact the whole owner_cid tracking logic could probably be removed from the kernel client because we don't support proxied maintenance operations. Cc: stable@vger.kernel.org # 5.3+ URL: https://tracker.ceph.com/issues/42757 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Robin Geuze <robin.geuze@nl.team.blue>
2021-07-20rbd: always kick acquire on "acquired" and "released" notificationsIlya Dryomov
Skipping the "lock has been released" notification if the lock owner is not what we expect based on owner_cid can lead to I/O hangs. One example is our own notifications: because owner_cid is cleared in rbd_unlock(), when we get our own notification it is processed as unexpected/duplicate and maybe_kick_acquire() isn't called. If a peer that requested the lock then doesn't go through with acquiring it, I/O requests that came in while the lock was being quiesced would be stalled until another I/O request is submitted and kicks acquire from rbd_img_exclusive_lock(). This makes the comment in rbd_release_lock() actually true: prior to this change the canceled work was being requeued in response to the "lock has been acquired" notification from rbd_handle_acquired_lock(). Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Robin Geuze <robin.geuze@nl.team.blue>
2021-07-20ALSA: hda/hdmi: Add quirk to force pin connectivity on NUC10Kai Vehmanen
On some Intel NUC10 variants, codec reports AC_JACK_PORT_NONE as pin default config for all pins. This results in broken audio. Add a quirk to force connectivity. BugLink: https://github.com/clearlinux/distribution/issues/2396 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210720153216.2200938-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-20Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()"Jia He
This reverts commit 6206b7981a36476f4695d661ae139f7db36a802d. That patch added additional spin_{un}lock_bh(), which was harmless but pointless. The orginal code path has guaranteed the pair of spin_{un}lock_bh(). We'd better revert it before we find the exact root cause of the bug_on mentioned in that patch. Fixes: 6206b7981a36 ("qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()") Cc: David S. Miller <davem@davemloft.net> Cc: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptionsPaolo Abeni
While running the self-tests on a KASAN enabled kernel, I observed a slab-out-of-bounds splat very similar to the one reported in commit 821bbf79fe46 ("ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions"). We additionally need to take care of fib6_metrics initialization failure when the caller provides an nh. The fix is similar, explicitly free the route instead of calling fib6_info_release on a half-initialized object. Fixes: f88d8ea67fbdb ("ipv6: Plumb support for nexthop object in a fib6_info") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20fsl/fman: Add fibre supportMaxim Kochetkov
Set SUPPORTED_FIBRE to mac_dev->if_support. It allows proper usage of PHYs with optical/fiber support. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20net/sched: act_skbmod: Skip non-Ethernet packetsPeilin Ye
Currently tcf_skbmod_act() assumes that packets use Ethernet as their L2 protocol, which is not always the case. As an example, for CAN devices: $ ip link add dev vcan0 type vcan $ ip link set up vcan0 $ tc qdisc add dev vcan0 root handle 1: htb $ tc filter add dev vcan0 parent 1: protocol ip prio 10 \ matchall action skbmod swap mac Doing the above silently corrupts all the packets. Do not perform skbmod actions for non-Ethernet packets. Fixes: 86da71b57383 ("net_sched: Introduce skbmod action") Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20mt7530 mt7530_fdb_write only set ivl bit vid larger than 1Eric Woudstra
Fixes my earlier patch which broke vlan unaware bridges. The IVL bit now only gets set for vid's larger than 1. Fixes: 11d8d98cbeef ("mt7530 fix mt7530_fdb_write vid missing ivl bit") Signed-off-by: Eric Woudstra <ericwouds@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20Merge branch 'octeon-DMAC'David S. Miller
Subbaraya Sundeep says: ==================== octeontx2-af: Introduce DMAC based switching With this patch set packets can be switched between all CGX mapped PFs and VFs in the system based on the DMAC addresses. To implement this: AF allocates high priority rules from top entry(0) in MCAM. Rules are allocated for all the CGX mapped PFs and VFs though they are not active and with no NIXLFs attached. Rules for a PF/VF will be enabled only after they are brought up. Two rules one for TX and one for RX are allocated for each PF/VF. A packet sent from a PF/VF with a destination mac of another PF/VF will be hit by TX rule and sent to LBK channel 63. The same returned packet will be hit by RX rule whose action is to forward packet to PF/VF with that destination mac. Implementation of this for 98xx is tricky since there are two NIX blocks and till now a PF/VF can install rule for an NIX0/1 interface only if it is mapped to corresponding NIX0/1 block. Hence Tx rules are modified such that TX interface in MCAM entry can be either NIX0-TX or NIX1-TX. Testing: 1. Create two VFs over PF1(on NIX0) and assign two VFs to two VMs 2. Assign ip addresses to two VFs in VMs and PF2(on NIX1) in host. 3. Assign static arp entries in two VMs and PF2. 4. Ping between VMs and host PF2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20drm: Return -ENOTTY for non-drm ioctlsCharles Baylis
drm: Return -ENOTTY for non-drm ioctls Return -ENOTTY from drm_ioctl() when userspace passes in a cmd number which doesn't relate to the drm subsystem. Glibc uses the TCGETS ioctl to implement isatty(), and without this change isatty() returns it incorrectly returns true for drm devices. To test run this command: $ if [ -t 0 ]; then echo is a tty; fi < /dev/dri/card0 which shows "is a tty" without this patch. This may also modify memory which the userspace application is not expecting. Signed-off-by: Charles Baylis <cb-kernel@fishzet.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/YPG3IBlzaMhfPqCr@stando.fishzet.co.uk
2021-07-20io_uring: fix memleak in io_init_wq_offload()Yang Yingliang
I got memory leak report when doing fuzz test: BUG: memory leak unreferenced object 0xffff888107310a80 (size 96): comm "syz-executor.6", pid 4610, jiffies 4295140240 (age 20.135s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... backtrace: [<000000001974933b>] kmalloc include/linux/slab.h:591 [inline] [<000000001974933b>] kzalloc include/linux/slab.h:721 [inline] [<000000001974933b>] io_init_wq_offload fs/io_uring.c:7920 [inline] [<000000001974933b>] io_uring_alloc_task_context+0x466/0x640 fs/io_uring.c:7955 [<0000000039d0800d>] __io_uring_add_tctx_node+0x256/0x360 fs/io_uring.c:9016 [<000000008482e78c>] io_uring_add_tctx_node fs/io_uring.c:9052 [inline] [<000000008482e78c>] __do_sys_io_uring_enter fs/io_uring.c:9354 [inline] [<000000008482e78c>] __se_sys_io_uring_enter fs/io_uring.c:9301 [inline] [<000000008482e78c>] __x64_sys_io_uring_enter+0xabc/0xc20 fs/io_uring.c:9301 [<00000000b875f18f>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000b875f18f>] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 [<000000006b0a8484>] entry_SYSCALL_64_after_hwframe+0x44/0xae CPU0 CPU1 io_uring_enter io_uring_enter io_uring_add_tctx_node io_uring_add_tctx_node __io_uring_add_tctx_node __io_uring_add_tctx_node io_uring_alloc_task_context io_uring_alloc_task_context io_init_wq_offload io_init_wq_offload hash = kzalloc hash = kzalloc ctx->hash_map = hash ctx->hash_map = hash <- one of the hash is leaked When calling io_uring_enter() in parallel, the 'hash_map' will be leaked, add uring_lock to protect 'hash_map'. Fixes: e941894eae31 ("io-wq: make buffered file write hashed work map per-ctx") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/20210720083805.3030730-1-yangyingliang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-20io_uring: remove double poll entry on arm failurePavel Begunkov
__io_queue_proc() can enqueue both poll entries and still fail afterwards, so the callers trying to cancel it should also try to remove the second poll entry (if any). For example, it may leave the request alive referencing a io_uring context but not accessible for cancellation: [ 282.599913][ T1620] task:iou-sqp-23145 state:D stack:28720 pid:23155 ppid: 8844 flags:0x00004004 [ 282.609927][ T1620] Call Trace: [ 282.613711][ T1620] __schedule+0x93a/0x26f0 [ 282.634647][ T1620] schedule+0xd3/0x270 [ 282.638874][ T1620] io_uring_cancel_generic+0x54d/0x890 [ 282.660346][ T1620] io_sq_thread+0xaac/0x1250 [ 282.696394][ T1620] ret_from_fork+0x1f/0x30 Cc: stable@vger.kernel.org Fixes: 18bceab101add ("io_uring: allow POLL_ADD with double poll_wait() users") Reported-and-tested-by: syzbot+ac957324022b7132accf@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0ec1228fc5eda4cb524eeda857da8efdc43c331c.1626774457.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-20io_uring: explicitly count entries for poll reqsPavel Begunkov
If __io_queue_proc() fails to add a second poll entry, e.g. kmalloc() failed, but it goes on with a third waitqueue, it may succeed and overwrite the error status. Count the number of poll entries we added, so we can set pt->error to zero at the beginning and find out when the mentioned scenario happens. Cc: stable@vger.kernel.org Fixes: 18bceab101add ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/9d6b9e561f88bcc0163623b74a76c39f712151c3.1626774457.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-20spi: spi-bcm2835: Fix deadlockAlexandru Tachici
The bcm2835_spi_transfer_one function can create a deadlock if it is called while another thread already has the CCF lock. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Fixes: f8043872e796 ("spi: add driver for BCM2835") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210716210245.13240-2-alexandru.tachici@analog.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-20Merge tag 'efi-urgent-for-v5.14-rc2' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent Pull EFI fixes for v5.14-rc2 from Ard Biesheuvel: " - Ensure that memblock reservations and IO reserved resources remain in sync when using the EFI memreserve feature. - Don't complain about invalid TPM final event log table if it is missing altogether. - Comment header fix for the stub. - Avoid a spurious warning when attempting to reserve firmware memory that is already reserved in the first place." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-07-20Merge branch 'net-hns3-fixes-for-net'Jakub Kicinski
Guangbin Huang says: ==================== net: hns3: fixes for -net This series includes some bugfixes for the HNS3 ethernet driver. ==================== Link: https://lore.kernel.org/r/1626685988-25869-1-git-send-email-huangguangbin2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-30 13:19:19 +0000