summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-03-23net/sched: fix incorrect vlan_push_eth dest fieldLouis Peens
Seems like a potential copy-paste bug slipped in here, the second memcpy should of course be populating src and not dest. Fixes: ab95465cde23 ("net/sched: add vlan push_eth and pop_eth action to the hardware IR") Signed-off-by: Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20220323092506.21639-1-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-23net: bridge: mst: Restrict info size queries to bridge portsTobias Waldekranz
Ensure that no bridge masters are ever considered for MST info dumping. MST states are only supported on bridge ports, not bridge masters - which br_mst_info_size relies on. Fixes: 122c29486e1f ("net: bridge: mst: Support setting and reporting MST port states") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Link: https://lore.kernel.org/r/20220322133001.16181-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-23net: marvell: prestera: add missing destroy_workqueue() in ↵Yang Yingliang
prestera_module_init() Add the missing destroy_workqueue() before return from prestera_module_init() in the error handling case. Fixes: 4394fbcb78cf ("net: marvell: prestera: handle fib notifications") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220322090236.1439649-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-23drivers: net: xgene: Fix regression in CRC strippingStephane Graber
All packets on ingress (except for jumbo) are terminated with a 4-bytes CRC checksum. It's the responsability of the driver to strip those 4 bytes. Unfortunately a change dating back to March 2017 re-shuffled some code and made the CRC stripping code effectively dead. This change re-orders that part a bit such that the datalen is immediately altered if needed. Fixes: 4902a92270fb ("drivers: net: xgene: Add workaround for errata 10GE_8/ENET_11") Cc: stable@vger.kernel.org Signed-off-by: Stephane Graber <stgraber@ubuntu.com> Tested-by: Stephane Graber <stgraber@ubuntu.com> Link: https://lore.kernel.org/r/20220322224205.752795-1-stgraber@ubuntu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22net: geneve: add missing netlink policy and size for ↵Eyal Birger
IFLA_GENEVE_INNER_PROTO_INHERIT Add missing netlink attribute policy and size calculation. Also enable strict validation from this new attribute onwards. Fixes: 435fe1c0c1f7 ("net: geneve: support IPv4/IPv6 as inner protocol") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Link: https://lore.kernel.org/r/20220322043954.3042468-1-eyal.birger@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22net: dsa: fix missing host-filtered multicast addressesVladimir Oltean
DSA ports are stacked devices, so they use dev_mc_add() to sync their address list to their lower interface (DSA master). But they are also hardware devices, so they program those addresses to hardware using the __dev_mc_add() sync and unsync callbacks. Unfortunately both cannot work at the same time, and it seems that the multicast addresses which are already present on the DSA master, like 33:33:00:00:00:01 (added by addrconf.c as in6addr_linklocal_allnodes) are synced to the master via dev_mc_sync(), but not to hardware by __dev_mc_sync(). This happens because both the dev_mc_sync() -> __hw_addr_sync_one() code path, as well as __dev_mc_sync() -> __hw_addr_sync_dev(), operate on the same variable: ha->sync_cnt, in a way that causes the "sync" method (dsa_slave_sync_mc) to no longer be called. To fix the issue we need to work with the API in the way in which it was intended to be used, and therefore, call dev_uc_add() and friends for each individual hardware address, from the sync and unsync callbacks. Fixes: 5e8a1e03aa4d ("net: dsa: install secondary unicast and multicast addresses as host FDB/MDB") Link: https://lore.kernel.org/netdev/20220321163213.lrn5sk7m6grighbl@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220322003701.2056895-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22net/mlx5e: Fix build warning, detected write beyond size of fieldSaeed Mahameed
When merged with Linus tree, the cited patch below will cause the following build warning: In function 'fortify_memset_chk', inlined from 'mlx5e_xmit_xdp_frame' at drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c:438:3: include/linux/fortify-string.h:242:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix that by grouping the fields to memeset in struct_group() to avoid the false alarm. Fixes: 9ded70fa1d81 ("net/mlx5e: Don't prefill WQEs in XDP SQ in the multi buffer mode") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20220322172224.31849-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22iwlwifi: mvm: Don't fail if PPAG isn't supportedMiri Korenblit
When we're copying the PPAG table into the cmd structure we're failing if the table doesn't exist in ACPI or is invalid, or if the FW doesn't support PPAG setting etc. This is wrong because those are valid scenarios. Fix this by not failing in those cases. Fixes: e8e10a37c51c ("iwlwifi: acpi: move ppag code from mvm to fw/acpi") Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/iwlwifi.20220322173828.fa47f369b717.I6a9c65149c2c3c11337f3a802dff22f514a3a436@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf-next 2022-03-21 v2 We've added 137 non-merge commits during the last 17 day(s) which contain a total of 143 files changed, 7123 insertions(+), 1092 deletions(-). The main changes are: 1) Custom SEC() handling in libbpf, from Andrii. 2) subskeleton support, from Delyan. 3) Use btf_tag to recognize __percpu pointers in the verifier, from Hao. 4) Fix net.core.bpf_jit_harden race, from Hou. 5) Fix bpf_sk_lookup remote_port on big-endian, from Jakub. 6) Introduce fprobe (multi kprobe) _without_ arch bits, from Masami. The arch specific bits will come later. 7) Introduce multi_kprobe bpf programs on top of fprobe, from Jiri. 8) Enable non-atomic allocations in local storage, from Joanne. 9) Various var_off ptr_to_btf_id fixed, from Kumar. 10) bpf_ima_file_hash helper, from Roberto. 11) Add "live packet" mode for XDP in BPF_PROG_RUN, from Toke. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (137 commits) selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" bpftool: Fix a bug in subskeleton code generation bpf: Fix bpf_prog_pack when PMU_SIZE is not defined bpf: Fix bpf_prog_pack for multi-node setup bpf: Fix warning for cast from restricted gfp_t in verifier bpf, arm: Fix various typos in comments libbpf: Close fd in bpf_object__reuse_map bpftool: Fix print error when show bpf map bpf: Fix kprobe_multi return probe backtrace Revert "bpf: Add support to inline bpf_get_func_ip helper on x86" bpf: Simplify check in btf_parse_hdr() selftests/bpf/test_lirc_mode2.sh: Exit with proper code bpf: Check for NULL return from bpf_get_btf_vmlinux selftests/bpf: Test skipping stacktrace bpf: Adjust BPF stack helper functions to accommodate skip > 0 bpf: Select proper size for bpf_prog_pack ... ==================== Link: https://lore.kernel.org/r/20220322050159.5507-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22selftests/bpf: Fix kprobe_multi test.Alexei Starovoitov
When compiler emits endbr insn the function address could be different than what bpf_get_func_ip() reports. This is a short term workaround. bpf_get_func_ip() will be fixed later. Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-03-22Revert "rethook: x86: Add rethook x86 implementation"Alexei Starovoitov
This reverts commit 75caf33eda242e2f34f61e475d666359749ae5ff. Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-03-22Revert "arm64: rethook: Add arm64 rethook implementation"Alexei Starovoitov
This reverts commit 83acdce6894908337ca82973149d9709d28204d7. Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-03-22Revert "powerpc: Add rethook support"Alexei Starovoitov
This reverts commit 02752bd99dc2daae05c12f7063bf0632e22b4c1c. Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-03-22Revert "ARM: rethook: Add rethook arm implementation"Alexei Starovoitov
This reverts commit 515a49173b80a4aabcbad9a4fa2a247042378ea1. Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-03-22netdevice: add missing dm_private kdocJakub Kicinski
Building htmldocs complains: include/linux/netdevice.h:2295: warning: Function parameter or member 'dm_private' not described in 'net_device' Fixes: b26ef81c46ed ("drop_monitor: remove quadratic behavior") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220322051053.1883186-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-22net: bridge: mst: prevent NULL deref in br_mst_info_size()Eric Dumazet
Call br_mst_info_size() only if vg pointer is not NULL. general protection fault, probably for non-canonical address 0xdffffc0000000058: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000002c0-0x00000000000002c7] CPU: 0 PID: 975 Comm: syz-executor.0 Tainted: G W 5.17.0-next-20220321-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:br_mst_info_size+0x97/0x270 net/bridge/br_mst.c:242 Code: 00 00 31 c0 e8 ba 10 53 f9 31 c0 b9 40 00 00 00 4c 8d 6c 24 30 4c 89 ef f3 48 ab 48 8d 83 c0 02 00 00 48 89 04 24 48 c1 e8 03 <80> 3c 28 00 0f 85 ae 01 00 00 48 8b 83 c0 02 00 00 41 bf 04 00 00 RSP: 0018:ffffc900153770a8 EFLAGS: 00010202 RAX: 0000000000000058 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff88259876 RDI: ffffc900153772d8 RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffffff8db68957 R10: ffffffff881f737b R11: 0000000000000000 R12: 0000000000000000 R13: ffffc900153770d8 R14: 00000000000002a0 R15: 00000000ffffffff FS: 00007f18bbb6f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020001a80 CR3: 000000001a7d9000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 00000000000000d8 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> br_get_link_af_size_filtered+0x6e9/0xc00 net/bridge/br_netlink.c:123 rtnl_link_get_af_size net/core/rtnetlink.c:598 [inline] if_nlmsg_size+0x40c/0xa50 net/core/rtnetlink.c:1040 rtnl_calcit.isra.0+0x25f/0x460 net/core/rtnetlink.c:3780 rtnetlink_rcv_msg+0xa65/0xb80 net/core/rtnetlink.c:5937 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f18baa89049 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f18bbb6f168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f18bab9bf60 RCX: 00007f18baa89049 RDX: 0000000000000000 RSI: 0000000020001a80 RDI: 0000000000000004 RBP: 00007f18baae308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffeedb2be2f R14: 00007f18bbb6f300 R15: 0000000000022000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:br_mst_info_size+0x97/0x270 net/bridge/br_mst.c:242 Code: 00 00 31 c0 e8 ba 10 53 f9 31 c0 b9 40 00 00 00 4c 8d 6c 24 30 4c 89 ef f3 48 ab 48 8d 83 c0 02 00 00 48 89 04 24 48 c1 e8 03 <80> 3c 28 00 0f 85 ae 01 00 00 48 8b 83 c0 02 00 00 41 bf 04 00 00 RSP: 0018:ffffc900153770a8 EFLAGS: 00010202 RAX: 0000000000000058 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff88259876 RDI: ffffc900153772d8 RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffffff8db68957 R10: ffffffff881f737b R11: 0000000000000000 R12: 0000000000000000 R13: ffffc900153770d8 R14: 00000000000002a0 R15: 00000000ffffffff FS: 00007f18bbb6f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2ca22000 CR3: 000000001a7d9000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 00000000000000d8 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 122c29486e1f ("net: bridge: mst: Support setting and reporting MST port states") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tobias Waldekranz <tobias@waldekranz.com> Cc: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220322012314.795187-1-eric.dumazet@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-22Merge branch 'selftests-forwarding-locked-bridge-port-fixes'Paolo Abeni
Ido Schimmel says: ==================== selftests: forwarding: Locked bridge port fixes Two fixes for the locked bridge port selftest. ==================== Link: https://lore.kernel.org/r/20220321175102.978020-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-22selftests: forwarding: Use same VRF for port and VLAN upperIdo Schimmel
The test creates a separate VRF for the VLAN upper, but does not destroy it during cleanup, resulting in "RTNETLINK answers: File exists" errors. Fix by using the same VRF for the port and its VLAN upper. This is OK since their IP addresses do not overlap. Before: # ./bridge_locked_port.sh TEST: Locked port ipv4 [ OK ] TEST: Locked port ipv6 [ OK ] TEST: Locked port vlan [ OK ] # ./bridge_locked_port.sh RTNETLINK answers: File exists RTNETLINK answers: File exists RTNETLINK answers: File exists RTNETLINK answers: File exists RTNETLINK answers: File exists RTNETLINK answers: File exists TEST: Locked port ipv4 [ OK ] TEST: Locked port ipv6 [ OK ] TEST: Locked port vlan [ OK ] After: # ./bridge_locked_port.sh TEST: Locked port ipv4 [ OK ] TEST: Locked port ipv6 [ OK ] TEST: Locked port vlan [ OK ] # ./bridge_locked_port.sh TEST: Locked port ipv4 [ OK ] TEST: Locked port ipv6 [ OK ] TEST: Locked port vlan [ OK ] Fixes: b2b681a41251 ("selftests: forwarding: tests of locked port feature") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-22selftests: forwarding: Disable learning before link upIdo Schimmel
Disable learning before bringing the bridge port up in order to avoid the FDB being populated and the test failing. Before: # ./bridge_locked_port.sh RTNETLINK answers: File exists TEST: Locked port ipv4 [FAIL] Ping worked after locking port, but before adding FDB entry TEST: Locked port ipv6 [ OK ] TEST: Locked port vlan [ OK ] After: # ./bridge_locked_port.sh TEST: Locked port ipv4 [ OK ] TEST: Locked port ipv6 [ OK ] TEST: Locked port vlan [ OK ] Fixes: b2b681a41251 ("selftests: forwarding: tests of locked port feature") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-22bnx2x: truncate value to original sizingBill Wendling
The original behavior was to print out unsigned short or unsigned char values. The change in commit d65aea8e8298 ("bnx2x: use correct format characters") prints out the whole value if not truncated. So truncate the value to an unsigned {short|char} to retain the original behavior. Fixes: d65aea8e8298 ("bnx2x: use correct format characters") Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Bill Wendling <morbo@google.com> Link: https://lore.kernel.org/r/20220321023155.106066-1-morbo@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-21Merge branch 'net-mscc-miim-add-integrated-phy-reset-support'Jakub Kicinski
Michael Walle says: ==================== net: mscc-miim: add integrated PHY reset support The MDIO driver has support to release the integrated PHYs from reset. This was implemented for the SparX-5 for now. Now add support for the LAN966x, too. ==================== Link: https://lore.kernel.org/r/20220318201324.1647416-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21net: mdio: mscc-miim: add lan966x internal phy reset supportMichael Walle
The LAN966x has two internal PHYs which are in reset by default. The driver already supported the internal PHYs of the SparX-5. Now add support for the LAN966x, too. Add a new compatible to distinguish them. The LAN966x has additional control bits in this register, thus convert the regmap_write() to regmap_update_bits() to leave the remaining bits untouched. This doesn't change anything for the SparX-5 SoC, because there, the register consists only of reset bits. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21net: mdio: mscc-miim: replace magic numbers for the bus resetMichael Walle
Replace the magic numbers by macros which are already defined. It seems the original commit missed to use them. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21dt-bindings: net: mscc-miim: add lan966x compatibleMichael Walle
The MDIO controller has support to release the internal PHYs from reset by specifying a second memory resource. This is different between the currently supported SparX-5 and the LAN966x. Add a new compatible to distinguish between these two. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21net: dsa: mv88e6xxx: Fill in STU support for all supported chipsTobias Waldekranz
Some chips using the split VTU/STU design will not accept VTU entries who's SID points to an invalid STU entry. Therefore, mark all those chips with either the mv88e6352_g1_stu_* or mv88e6390_g1_stu_* ops as appropriate. Notably, chips for the Opal Plus (6085/6097) era seem to use a different implementation than those from Agate (6352) and onwards, even though their external interface is the same. The former happily accepts VTU entries referencing invalid STU entries, while the latter does not. This fixes an issue where the driver would fail to probe switch trees that contained chips of the Agate/Topaz generation which did not declare STU support, as loaded VTU entries would be read back as invalid. Fixes: 49c98c1dc7d9 ("net: dsa: mv88e6xxx: Disentangle STU from VTU") Reported-by: Marek Behún <kabel@kernel.org> Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20220319110345.555270-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21selftests: net: change fprintf format specifiersGuo Zhengkui
`cur64`, `start64` and `ts_delta` are int64_t. Change format specifiers in fprintf from `"%lu"` to `"%" PRId64` to adapt to 32-bit and 64-bit systems. Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Link: https://lore.kernel.org/r/20220319073730.5235-1-guozhengkui@vivo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21net: dsa: felix: allow PHY_INTERFACE_MODE_INTERNAL on port 5Vladimir Oltean
The Felix switch has 6 ports, 2 of which are internal. Due to some misunderstanding, my initial suggestion for vsc9959_port_modes[]: https://patchwork.kernel.org/project/netdevbpf/patch/20220129220221.2823127-10-colin.foster@in-advantage.com/#24718277 got translated by Colin into a 5-port array, leading to an all-zero port mode mask for port 5. Fixes: acf242fc739e ("net: dsa: felix: remove prevalidate_phy_mode interface") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220318195812.276276-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21Merge branch 'net-dsa-mv88e6xxx-mst-fixes'Jakub Kicinski
Tobias Waldekranz says: ==================== net: dsa: mv88e6xxx: MST Fixes 1/2 fixes the issue reported by Marek here: https://lore.kernel.org/netdev/20220318182817.5ade8ecd@dellmb/ 2/2 adds a missing capability check to the new .vlan_msti_set callback. ==================== Link: https://lore.kernel.org/r/20220318201321.4010543-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21net: dsa: mv88e6xxx: Ensure STU support in VLAN MSTI callbackTobias Waldekranz
In the same way that we check for STU support in the MST state callback, we should also verify it before trying to change a VLANs MSTI membership. Fixes: acaf4d2e36b3 ("net: dsa: mv88e6xxx: MST Offloading") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21net: dsa: mv88e6xxx: Require ops be implemented to claim STU supportTobias Waldekranz
Simply having a physical STU table in the device doesn't do us any good if there's no implementation of the relevant ops to access that table. So ensure that chips that claim STU support can also talk to the hardware. This fixes an issue where chips that had a their ->info->max_sid set (due to their family membership), but no implementation (due to their chip-specific ops struct) would fail to probe. Fixes: 49c98c1dc7d9 ("net: dsa: mv88e6xxx: Disentangle STU from VTU") Reported-by: Marek Behún <kabel@kernel.org> Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21Merge branch 'net-tls-some-optimizations-for-tls'Jakub Kicinski
Ziyang Xuan says: ==================== net/tls: some optimizations for tls Do some small optimizations for tls, including jump instructions optimization, and judgement processes optimization. ==================== Link: https://lore.kernel.org/r/cover.1647658604.git.william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21net/tls: optimize judgement processes in tls_set_device_offload()Ziyang Xuan
It is known that priority setting HW offload when set tls TX/RX offload by setsockopt(). Check netdevice whether support NETIF_F_HW_TLS_TX or not at the later stages in the whole tls_set_device_offload() process, some memory allocations have been done before that. We must release those memory and return error if we judge the netdevice not support NETIF_F_HW_TLS_TX. It is redundant. Move NETIF_F_HW_TLS_TX judgement forward, and move start_marker_record and offload_ctx memory allocation back slightly. Thus, we can get simpler exception handling process. Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21net/tls: remove unnecessary jump instructions in do_tls_setsockopt_conf()Ziyang Xuan
Avoid using "goto" jump instruction unconditionally when we can return directly. Remove unnecessary jump instructions in do_tls_setsockopt_conf(). Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21bpftool: Fix a bug in subskeleton code generationYonghong Song
Compiled with clang by adding LLVM=1 both kernel and selftests/bpf build, I hit the following compilation error: In file included from /.../tools/testing/selftests/bpf/prog_tests/subskeleton.c:6: ./test_subskeleton_lib.subskel.h:168:6: error: variable 'err' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (!s->progs) ^~~~~~~~~ ./test_subskeleton_lib.subskel.h:181:11: note: uninitialized use occurs here errno = -err; ^~~ ./test_subskeleton_lib.subskel.h:168:2: note: remove the 'if' if its condition is always false if (!s->progs) ^~~~~~~~~~~~~~ The compilation error is triggered by the following code ... int err; obj = (struct test_subskeleton_lib *)calloc(1, sizeof(*obj)); if (!obj) { errno = ENOMEM; goto err; } ... err: test_subskeleton_lib__destroy(obj); errno = -err; ... in test_subskeleton_lib__open(). The 'err' is not initialized, yet it is used in 'errno = -err' later. The fix is to remove 'errno = -err' since errno has been set properly in all incoming branches. Fixes: 00389c58ffe9 ("bpftool: Add support for subskeletons") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220320032009.3106133-1-yhs@fb.com
2022-03-21bpf: Fix bpf_prog_pack when PMU_SIZE is not definedSong Liu
PMD_SIZE is not available in some special config, e.g. ARCH=arm with CONFIG_MMU=n. Use bpf_prog_pack of PAGE_SIZE in these cases. Fixes: ef078600eec2 ("bpf: Select proper size for bpf_prog_pack") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220321180009.1944482-3-song@kernel.org
2022-03-21bpf: Fix bpf_prog_pack for multi-node setupSong Liu
module_alloc requires num_online_nodes * PMD_SIZE to allocate huge pages. bpf_prog_pack uses pack of size num_online_nodes * PMD_SIZE. OTOH, module_alloc returns addresses that are PMD_SIZE aligned (instead of num_online_nodes * PMD_SIZE aligned). Therefore, PMD_MASK should be used to calculate pack_ptr in bpf_prog_pack_free(). Fixes: ef078600eec2 ("bpf: Select proper size for bpf_prog_pack") Reported-by: syzbot+c946805b5ce6ab87df0b@syzkaller.appspotmail.com Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220321180009.1944482-2-song@kernel.org
2022-03-21bpf: Fix warning for cast from restricted gfp_t in verifierJoanne Koong
This fixes the sparse warning reported by the kernel test robot: kernel/bpf/verifier.c:13499:47: sparse: warning: cast from restricted gfp_t kernel/bpf/verifier.c:13501:47: sparse: warning: cast from restricted gfp_t This fix can be verified locally by running: 1) wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O make.cross 2) chmod +x ~/bin/make.cross 3) COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 ./make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' Fixes: b00fa38a9c1c ("bpf: Enable non-atomic allocations in local storage") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220321185802.824223-1-joannekoong@fb.com
2022-03-21net: Revert the softirq will run annotation in ____napi_schedule().Sebastian Andrzej Siewior
The lockdep annotation lockdep_assert_softirq_will_run() expects that either hard or soft interrupts are disabled because both guaranty that the "raised" soft-interrupts will be processed once the context is left. This triggers in flush_smp_call_function_from_idle() but it this case it explicitly calls do_softirq() in case of pending softirqs. Revert the "softirq will run" annotation in ____napi_schedule() and move the check back to __netif_rx() as it was. Keep the IRQ-off assert in ____napi_schedule() because this is always required. Fixes: fbd9a2ceba5c7 ("net: Add lockdep asserts to ____napi_schedule().") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/YjhD3ZKWysyw8rc6@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-21bpf, arm: Fix various typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220318103729.157574-9-Julia.Lawall@inria.fr
2022-03-21libbpf: Close fd in bpf_object__reuse_mapHengqi Chen
pin_fd is dup-ed and assigned in bpf_map__reuse_fd. Close it in bpf_object__reuse_map after reuse. Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220319030533.3132250-1-hengqi.chen@gmail.com
2022-03-21Merge branch 'devlink-locking'David S. Miller
Jakub Kicinski says: ==================== devlink: hold the instance lock in eswitch callbacks Series number 2 in the effort to hold the devlink instance lock in call driver callbacks. We have the following drivers using this API: - bnxt, nfp, netdevsim - their own locking is removed / simplified by this series; all of them needed a lock to protect from changes to the number of VFs while switching modes, now the VF config bus callback takes the devlink instance lock via devl_lock(); - ice - appears not to allow changing modes while SR-IOV enabled, so nothing to do there; - liquidio - does not contain any locking; - octeontx2/af - is very special but at least doesn't have locking so doesn't get in the way either; - mlx5 has a wealth of locks - I chickened out and dropped the lock in the callbacks so that I can leave the driver be, for now. The last one is obviously not ideal, but I would prefer to transition the API already as it make take longer. v2: use a wrapper in mlx5 and extend the comment ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21devlink: hold the instance lock during eswitch_mode callbacksJakub Kicinski
Make the devlink core hold the instance lock during eswitch_mode callbacks. Cheat in case of mlx5 (see the cover letter). Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21netdevsim: replace vfs_lock with devlink instance lockJakub Kicinski
Similarly to the previous commit, use the devlink instance lock and let it replace the vfs_lock. nsim_esw_legacy_enable() was locked by both port lock and vfs lock so one set of lock/unlocks goes away. netdevsim's .eswitch_mode_set callback is now ready for the callback to take the instance lock. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21netdevsim: replace port_list_lock with devlink instance lockJakub Kicinski
Take advantage of the devlink instance lock for protecting the port list. This will simplify locking even more once all devlink callbacks hold the instance lock. We need to add locking in nsim_dev_port_add_all() which used to assume higher layer protection when accessing the list. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21devlink: add explicitly locked flavor of the rate node APIsJakub Kicinski
We'll need an explicitly locked rate node API for netdevsim to switch eswitch mode setting to locked. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21bnxt: use the devlink instance lock to protect sriovJakub Kicinski
In prep for .eswitch_mode_set being called with the devlink instance lock held use that lock explicitly instead of creating a local mutex just for the sriov reconfig. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21bpftool: Fix print error when show bpf mapYafang Shao
If there is no btf_id or frozen, it will not show the pids, but the pids don't depend on any one of them. Below is the result after this change: $ ./bpftool map show 2: lpm_trie flags 0x1 key 8B value 8B max_entries 1 memlock 4096B pids systemd(1) 3: lpm_trie flags 0x1 key 20B value 8B max_entries 1 memlock 4096B pids systemd(1) While before this change, the 'pids systemd(1)' can't be displayed. Fixes: 9330986c0300 ("bpf: Add bloom filter map implementation") Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220320060815.7716-1-laoar.shao@gmail.com
2022-03-21bpf: Fix kprobe_multi return probe backtraceJiri Olsa
Andrii reported that backtraces from kprobe_multi program attached as return probes are not complete and showing just initial entry [1]. It's caused by changing registers to have original function ip address as instruction pointer even for return probe, which will screw backtrace from return probe. This change keeps registers intact and store original entry ip and link address on the stack in bpf_kprobe_multi_run_ctx struct, where bpf_get_func_ip and bpf_get_attach_cookie helpers for kprobe_multi programs can find it. [1] https://lore.kernel.org/bpf/CAEf4BzZDDqK24rSKwXNp7XL3ErGD4bZa1M6c_c4EvDSt3jrZcg@mail.gmail.com/T/#m8d1301c0ea0892ddf9dc6fba57a57b8cf11b8c51 Fixes: ca74823c6e16 ("bpf: Add cookie support to programs attached with kprobe multi link") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220321070113.1449167-3-jolsa@kernel.org
2022-03-21Revert "bpf: Add support to inline bpf_get_func_ip helper on x86"Jiri Olsa
This reverts commit 97ee4d20ee67eb462581a7af01442de6586e390b. Following change is adding more complexity to bpf_get_func_ip helper for kprobe_multi programs, which can't be inlined easily. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220321070113.1449167-2-jolsa@kernel.org
2022-03-21bpf: Simplify check in btf_parse_hdr()Yuntao Wang
Replace offsetof(hdr_len) + sizeof(hdr_len) with offsetofend(hdr_len) to simplify the check for correctness of btf_data_size in btf_parse_hdr() Signed-off-by: Yuntao Wang <ytcoode@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220320075240.1001728-1-ytcoode@gmail.com
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-01-07 21:25:29 +0000