summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-01-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Two small performance tweaks, the plumbing for the execveat system call and a couple of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/uprobes: fix user space PER events s390/bpf: Fix JMP_JGE_X (A > X) and JMP_JGT_X (A >= X) s390/bpf: Fix ALU_NEG (A = -A) s390/mm: avoid using pmd_to_page for !USE_SPLIT_PMD_PTLOCKS s390/timex: fix get_tod_clock_ext() inline assembly s390: wire up execveat syscall s390/kernel: use stnsm 255 instead of stosm 0 s390/vtime: Get rid of redundant WARN_ON s390/zcrypt: kernel oops at insmod of the z90crypt device driver
2015-01-14openvswitch: packet messages need their own probe attribtueThomas Graf
User space is currently sending a OVS_FLOW_ATTR_PROBE for both flow and packet messages. This leads to an out-of-bounds access in ovs_packet_cmd_execute() because OVS_FLOW_ATTR_PROBE > OVS_PACKET_ATTR_MAX. Introduce a new OVS_PACKET_ATTR_PROBE with the same numeric value as OVS_FLOW_ATTR_PROBE to grow the range of accepted packet attributes while maintaining to be binary compatible with existing OVS binaries. Fixes: 05da589 ("openvswitch: Add support for OVS_FLOW_ATTR_PROBE.") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Tracked-down-by: Florian Westphal <fw@strlen.de> Signed-off-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14i40e: adds FCoE configure optionVasu Dev
Adds FCoE config option I40E_FCOE, so that FCoE can be enabled as needed but otherwise have it disabled by default. This also eliminate multiple FCoE config checks, instead now just one config check for CONFIG_I40E_FCOE. The I40E FCoE was added with 3.17 kernel and therefore this patch shall be applied to stable 3.17 kernel also. CC: <stable@vger.kernel.org> Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14cxgb4vf: Fix queue allocation for 40G adapterHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15Merge tag 'locks-v3.19-1' of git://git.samba.org/jlayton/linuxLinus Torvalds
Pull file locking fix from Jeff Layton: "Just a simple bugfix for a regression that I introduced into v3.18 with the internal lease API overhaul -- mea culpa. Kudos to Linda and Neil for tracking this down and fixing it" * tag 'locks-v3.19-1' of git://git.samba.org/jlayton/linux: locks: fix NULL-deref in generic_delete_lease
2015-01-14netdevice: Add missing parentheses in macroBenjamin Poirier
For example, one could conceivably call for_each_netdev_in_bond_rcu(condition ? bond1 : bond2, slave) and get an unexpected result. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer fixes from Jens Axboe: "The major part is an update to the NVMe driver, fixing various issues around surprise removal and hung controllers. Most of that is from Keith, and parts are simple blk-mq fixes or exports/additions of minor functions to aid this effort, and parts are changes directly to the NVMe driver. Apart from the above, this contains: - Small blk-mq change from me, killing an unused member of the hardware queue structure. - Small fix from Ming Lei, fixing up a few drivers that didn't properly check for ERR_PTR() returns from blk_mq_init_queue()" * 'for-linus' of git://git.kernel.dk/linux-block: NVMe: Fix locking on abort handling NVMe: Start and stop h/w queues on reset NVMe: Command abort handling fixes NVMe: Admin queue removal handling NVMe: Reference count admin queue usage NVMe: Start all requests blk-mq: End unstarted requests on a dying queue blk-mq: Allow requests to never expire blk-mq: Add helper to abort requeued requests blk-mq: Let drivers cancel requeue_work blk-mq: Export if requests were started blk-mq: Wake tasks entering queue on dying blk-mq: get rid of ->cmd_size in the hardware queue block: fix checking return value of blk_mq_init_queue block: wake up waiters when a queue is marked dying NVMe: Fix double free irq blk-mq: Export freeze/unfreeze functions blk-mq: Exit queue on alloc failure
2015-01-14bridge: only provide proxy ARP when CONFIG_INET is enabledArnd Bergmann
When IPV4 support is disabled, we cannot call arp_send from the bridge code, which would result in a kernel link error: net/built-in.o: In function `br_handle_frame_finish': :(.text+0x59914): undefined reference to `arp_send' :(.text+0x59a50): undefined reference to `arp_tbl' This makes the newly added proxy ARP support in the bridge code depend on the CONFIG_INET symbol and lets the compiler optimize the code out to avoid the link error. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 958501163ddd ("bridge: Add support for IEEE 802.11 Proxy ARP") Cc: Kyeyoon Park <kyeyoonp@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14usb: dwc3: gadget: Stop TRB preparation after limit is reachedAmit Virdi
DWC3 gadget sets up a pool of 32 TRBs for each EP during initialization. This means, the max TRBs that can be submitted for an EP is fixed to 32. Since the request queue for an EP is a linked list, any number of requests can be queued to it by the gadget layer. However, the dwc3 driver must not submit TRBs more than the pool it has created for. This limit wasn't respected when SG was used resulting in submitting more than the max TRBs, eventually leading to non-transfer of the TRBs submitted over the max limit. Root cause: When SG is used, there are two loops iterating to prepare TRBs: - Outer loop over the request_list - Inner loop over the SG list The code was missing break to get out of the outer loop. Fixes: eeb720fb21d6 (usb: dwc3: gadget: add support for SG lists) Cc: <stable@vger.kernel.org> # v3.9+ Signed-off-by: Amit Virdi <amit.virdi@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-14usb: dwc3: gadget: Fix TRB preparation during SGAmit Virdi
When scatter gather (SG) is used, multiple TRBs are prepared from one DWC3 request (dwc3_request). So while preparing TRBs, the 'last' flag should be set only when it is the last TRB being prepared from the last dwc3_request entry. The current implementation uses list_is_last to check if the dwc3_request is the last entry from the request_list. However, list_is_last returns false for the last entry too. This is because, while preparing the first TRB from a request, the function dwc3_prepare_one_trb modifies the request's next and prev pointers while moving the URB to req_queued. Hence, list_is_last always returns false no matter what. The correct way is not to access the modified pointers of dwc3_request but to use list_empty macro instead. Fixes: e5ba5ec833aa (usb: dwc3: gadget: fix scatter gather implementation) Signed-off-by: Amit Virdi <amit.virdi@st.com> Cc: <stable@vger.kernel.org> # v3.9+ Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-14mmc: sdhci: Set SDHCI_POWER_ON with external vmmcTim Kryger
Host controllers lacking the required internal vmmc regulator may still follow the spec with regard to the LSB of SDHCI_POWER_CONTROL. Set the SDHCI_POWER_ON bit when vmmc is enabled to encourage the controller to to drive CMD, DAT, SDCLK. This fixes a regression observed on some Qualcomm and Nvidia boards caused by 5222161 mmc: sdhci: Improve external VDD regulator support. Fixes: 52221610dd84 (mmc: sdhci: Improve external VDD regulator support) Signed-off-by: Tim Kryger <tim.kryger@gmail.com> Tested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-14Merge branch 'fixes' of ↵Zhang Rui
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
2015-01-14neighbour: fix base_reachable_time(_ms) not effective immediatly when changedJean-Francois Remy
When setting base_reachable_time or base_reachable_time_ms on a specific interface through sysctl or netlink, the reachable_time value is not updated. This means that neighbour entries will continue to be updated using the old value until it is recomputed in neigh_period_work (which recomputes the value every 300*HZ). On systems with HZ equal to 1000 for instance, it means 5mins before the change is effective. This patch changes this behavior by recomputing reachable_time after each set on base_reachable_time or base_reachable_time_ms. The new value will become effective the next time the neighbour's timer is triggered. Changes are made in two places: the netlink code for set and the sysctl handling code. For sysctl, I use a proc_handler. The ipv6 network code does provide its own handler but it already refreshes reachable_time correctly so it's not an issue. Any other user of neighbour which provide its own handlers must refresh reachable_time. Signed-off-by: Jean-Francois Remy <jeff@melix.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14net: fec: fix MDIO bus assignement for dual fec SoC'sStefan Agner
On i.MX28, the MDIO bus is shared between the two FEC instances. The driver makes sure that the second FEC uses the MDIO bus of the first FEC. This is done conditionally if FEC_QUIRK_ENET_MAC is set. However, in newer designs, such as Vybrid or i.MX6SX, each FEC MAC has its own MDIO bus. Simply removing the quirk FEC_QUIRK_ENET_MAC is not an option since other logic, triggered by this quirk, is still needed. Furthermore, there are board designs which use the same MDIO bus for both PHY's even though the second bus would be available on the SoC side. Such layout are popular since it saves pins on SoC side. Due to the above quirk, those boards currently do work fine. The boards in the mainline tree with such a layout are: - Freescale Vybrid Tower with TWR-SER2 (vf610-twr.dts) - Freescale i.MX6 SoloX SDB Board (imx6sx-sdb.dts) This patch adds a new quirk FEC_QUIRK_SINGLE_MDIO for i.MX28, which makes sure that the MDIO bus of the first FEC is used in any case. However, the boards above do have a SoC with a MDIO bus for each FEC instance. But the PHY's are not connected in a 1:1 configuration. A proper device tree description is needed to allow the driver to figure out where to find its PHY. This patch fixes that shortcoming by adding a MDIO bus child node to the first FEC instance, along with the two PHY's on that bus, and making use of the phy-handle property to add a reference to the PHY's. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-14Merge branch 'leds-fixes-for-3.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED fix from Bryan Wu. * 'leds-fixes-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: netxbig: fix oops at probe time
2015-01-14Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux Pull WRITE_ONCE argument order change from Christian Borntraeger: "As discussed on LKML[1] it was agreed that WRITE_ONCE(x, val) is better than ASSIGN_ONCE(val, x) Lets change that for 3.19 as 3.19 has no user yet, but the first users will hit linux-next soon" [1] http://marc.info/?l=linux-kernel&m=142081181707596 * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux: kernel: Change ASSIGN_ONCE(val, x) to WRITE_ONCE(x, val)
2015-01-13xen-netfront: use different locks for Rx and Tx statsDavid Vrabel
In netfront the Rx and Tx path are independent and use different locks. The Tx lock is held with hard irqs disabled, but Rx lock is held with only BH disabled. Since both sides use the same stats lock, a deadlock may occur. [ INFO: possible irq lock inversion dependency detected ] 3.16.2 #16 Not tainted --------------------------------------------------------- swapper/0/0 just changed the state of lock: (&(&queue->tx_lock)->rlock){-.....}, at: [<c03adec8>] xennet_tx_interrupt+0x14/0x34 but this lock took another, HARDIRQ-unsafe lock in the past: (&stat->syncp.seq#2){+.-...} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&stat->syncp.seq#2); local_irq_disable(); lock(&(&queue->tx_lock)->rlock); lock(&stat->syncp.seq#2); <Interrupt> lock(&(&queue->tx_lock)->rlock); Using separate locks for the Rx and Tx stats fixes this deadlock. Reported-by: Dmitry Piotrovsky <piotrovskydmitry@gmail.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13drivers: net: cpsw: fix multicast flush in dual emac modeMugunthan V N
Since ALE table is a common resource for both the interfaces in Dual EMAC mode and while bringing up the second interface in cpsw_ndo_set_rx_mode() all the multicast entries added by the first interface is flushed out and only second interface multicast addresses are added. Fixing this by flushing multicast addresses based on dual EMAC port vlans which will not affect the other emac port multicast addresses. Fixes: d9ba8f9 (driver: net: ethernet: cpsw: dual emac interface implementation) Cc: <stable@vger.kernel.org> # v3.9+ Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13leds: netxbig: fix oops at probe timeSimon Guinot
This patch fixes a NULL pointer dereference on led_dat->mode_val. Due to this bug, a kernel oops can be observed at probe time on the LaCie 2Big and 5Big v2 boards: Unable to handle kernel NULL pointer dereference at virtual address 00000008 [...] [<c03f244c>] (netxbig_led_probe) from [<c02c8c6c>] (platform_drv_probe+0x4c/0x9c) [<c02c8c6c>] (platform_drv_probe) from [<c02c72d0>] (driver_probe_device+0x98/0x25c) [<c02c72d0>] (driver_probe_device) from [<c02c7520>] (__driver_attach+0x8c/0x90) [<c02c7520>] (__driver_attach) from [<c02c5c24>] (bus_for_each_dev+0x68/0x94) [<c02c5c24>] (bus_for_each_dev) from [<c02c6408>] (bus_add_driver+0x124/0x1dc) [<c02c6408>] (bus_add_driver) from [<c02c7ac0>] (driver_register+0x78/0xf8) [<c02c7ac0>] (driver_register) from [<c000888c>] (do_one_initcall+0x80/0x1cc) [<c000888c>] (do_one_initcall) from [<c0733618>] (kernel_init_freeable+0xe4/0x1b4) [<c0733618>] (kernel_init_freeable) from [<c058db9c>] (kernel_init+0xc/0xec) [<c058db9c>] (kernel_init) from [<c0009850>] (ret_from_fork+0x14/0x24) [...] This bug was introduced by commit 588a6a99286ae30afb1339d8bc2163517b1b7dd1 ("leds: netxbig: fix attribute-creation race"). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2015-01-13cxgb4vf: Initialize mdio_addr before using itHariprasad Shenai
In commit 5ad24def21b205a8 ("cxgb4vf: Fix ethtool get_settings for VF driver") mdio_addr of port_info structure was used unininitialzed. Fixing it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13kernel: Change ASSIGN_ONCE(val, x) to WRITE_ONCE(x, val)Christian Borntraeger
Feedback has shown that WRITE_ONCE(x, val) is easier to use than ASSIGN_ONCE(val,x). There are no in-tree users yet, so lets change it for 3.19. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-14Merge tag 'linux-kselftest-3.19-rc-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This update contains three patches to fix one compile error, and two run-time bugs. One of them fixes infinite loop on ARM" * tag 'linux-kselftest-3.19-rc-5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/vm: fix link error for transhuge-stress test tools: testing: selftests: mq_perf_tests: Fix infinite loop on ARM selftests/exec: allow shell return code of 126
2015-01-14Merge tag 'stable/for-linus-3.19-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: "Several critical linear p2m fixes that prevented some hosts from booting" * tag 'stable/for-linus-3.19-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: properly retrieve NMI reason xen: check for zero sized area when invalidating memory xen: use correct type for physical addresses xen: correct race in alloc_p2m_pmd() xen: correct error for building p2m list on 32 bits x86/xen: avoid freeing static 'name' when kasprintf() fails x86/xen: add extra memory for remapped frames during setup x86/xen: don't count how many PFNs are identity mapped x86/xen: Free bootmem in free_p2m_page() during early boot x86/xen: Remove unnecessary BUG_ON(preemptible()) in xen_setup_timer()
2015-01-13net: Corrected the comment describing the ndo operations to reflect the ↵B Viswanath
actual prototype for couple of operations Corrected the comment describing the ndo operations to reflect the actual prototype for couple of operations Signed-off-by: B Viswanath <marichika4@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13clk: berlin: bg2q: remove non-exist "smemc" gate clockJisheng Zhang
The "smemc" clock is removed on BG2Q SoCs. In fact, bit19 of clkenable register is for nfc. Current code use bit19 for non-exist "smemc" incorrectly, this prevents eMMC from working due to the sdhci's "core" clk is still gated. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-13clk: at91: keep slow clk enabled to prevent system hangBoris Brezillon
All slow clk users are not properly claiming it (get + prepare + enable) before using it. If all users properly claiming this clock release it, the clock is disabled, but faulty users still depends on it, and the system hangs. This fix prevents the slow clock from being disabled, and should solve the hanging issue, but offending drivers should be patched to properly claim this clock. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Bo Shen <voice.shen@atmel.com> Cc: stable@vger.kernel.org Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-14Merge branch 'for-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: "Specifics: - Fix a problem that Intel SoC DTS thermal driver does not work when CONFIG_THERMAL_INT340X is not set. - Fix a NULL pointer dereference when processor_thermal_device driver is loaded on a platform without ACPI support" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: int340x_thermal/processor_thermal_device: return failure when ACPI/int340x_thermal: enumerate INT3401 for Intel SoC DTS thermal driver ACPI/int340x_thermal: enumerate INT340X devices even if they're not in _ART/_TRT
2015-01-13dmaengine: dw: balance PM runtime callsAndy Shevchenko
In case of PCI driver we will get a warning: dw_dmac_pci 0000:00:18.0: Unbalanced pm_runtime_enable! dw_dmac_pci 0000:00:18.0: DesignWare DMA Controller, 8 channels This happens due to pm_runtime_enable() call from the driver when PM runtime is enabled by core. This patch moves that call to the platform driver where it might make sense. Fixes: bb32baf76e56 (dmaengine: dw: enable runtime PM) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-13usb: phy: mv-usb: fix usb_phy build errorsArnd Bergmann
The driver was recently adapted to a core API change, but the change was incomplete, missing out the suspend helper and leaving an extraneous local variable around: usb/phy/phy-mv-usb.c: In function 'mv_otg_update_state': usb/phy/phy-mv-usb.c:341:18: warning: unused variable 'phy' [-Wunused-variable] usb/phy/phy-mv-usb.c: In function 'mv_otg_suspend': usb/phy/phy-mv-usb.c:861:16: error: 'struct usb_phy' has no member named 'state' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: e47d92545c297 ("usb: move the OTG state from the USB PHY to the OTG structure") Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-13fbdev/broadsheetfb: fix memory leakColin Ian King
static code analysis from cppcheck reports: [drivers/video/fbdev/broadsheetfb.c:673]: (error) Memory leak: sector_buffer sector_buffer is not being kfree'd on each call to broadsheet_spiflash_rewrite_sector(), so free it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13locks: fix NULL-deref in generic_delete_leaseNeilBrown
commit 0efaa7e82f02fe69c05ad28e905f31fc86e6f08e locks: generic_delete_lease doesn't need a file_lock at all moves the call to fl->fl_lmops->lm_change() to a place in the code where fl might be a non-lease lock. When that happens, fl_lmops is NULL and an Oops ensures. So add an extra test to restore correct functioning. Reported-by: Linda Walsh <suse@tlinx.org> Link: https://bugzilla.suse.com/show_bug.cgi?id=912569 Cc: stable@vger.kernel.org (v3.18) Fixes: 0efaa7e82f02fe69c05ad28e905f31fc86e6f08e Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Jeff Layton <jlayton@primarydata.com>
2015-01-13simplefb: Fix build failure on SparcHans de Goede
of_platform_device_create is only defined when CONFIG_OF_ADDRESS is set, which is normally always the case when CONFIG_OF is defined, except on Sparc, so explicitly check for CONFIG_OF_ADDRESS rather then for CONFIG_OF. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-13x86/xen: properly retrieve NMI reasonJan Beulich
Using the native code here can't work properly, as the hypervisor would normally have cleared the two reason bits by the time Dom0 gets to see the NMI (if passed to it at all). There's a shared info field for this, and there's an existing hook to use - just fit the two together. This is particularly relevant so that NMIs intended to be handled by APEI / GHES actually make it to the respective handler. Note that the hook can (and should) be used irrespective of whether being in Dom0, as accessing port 0x61 in a DomU would be even worse, while the shared info field would just hold zero all the time. Note further that hardware NMI handling for PVH doesn't currently work anyway due to missing code in the hypervisor (but it is expected to work the native rather than the PV way). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-12staging: vt6655: fix sparse warning: argument typeEddie Kovsky
Fixes following warning generated by sparse: drivers/staging/vt6655/baseband.c:2180:45: warning: incorrect type in argument 1 (different address spaces) drivers/staging/vt6655/baseband.c:2180:45: expected struct vnt_private *priv drivers/staging/vt6655/baseband.c:2180:45: got void [noderef] <asn:2>*dwIoBase Compile tested on next-20141219. Signed-off-by: Eddie Kovsky <ewk@edkovsky.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12staging: vt6655: Fix loss of distant/weak access points on channel change.Malcolm Priestley
If the asssocated access point is strong byBBVGACurrent will be adjusted accordingly. Users will nolonger see distant access points without taking down interface. When changing channel reset byBBVGACurrent back to pDevice->abyBBVGA[0] for max sensitivity. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12staging: vt6655: vnt_tx_packet Fix corrupted tx packets.Malcolm Priestley
Move PSTxDesc->m_td1TD1 to inside spin locks. if m_td1TD1.byTCR has TCR_EDP and TCR_STP are set, the interrupt handler will try and complete the buffer before it is completed. Usually on the tail of a burst of tx packets. This results in a partially completed packet being transmitted or worse sitll dead lock when skb is freed by the interrupt handler. Set head_td->m_td1TD1.byTCR to 0 in first lock of vnt_tx_packet to stop interrupt handler completing the buffer. Move Set TSR1 & ReqCount in s_cbFillTxBufHead to the second lock. cbReqCount is carried to the second lock in pTDInfo->dwReqCount without the padding removed. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12staging: vt6655: fix sparse warnings: incorrect argument typeMike Krinkin
this patch fixes following sparse warnings: drivers/staging/vt6655/device_main.c:1503:25: warning: incorrect type in argument 1 (different address spaces) drivers/staging/vt6655/device_main.c:1503:25: expected void [noderef] <asn:2>*<noident> drivers/staging/vt6655/device_main.c:1503:25: got struct vnt_private * drivers/staging/vt6655/device_main.c:1503:25: warning: incorrect type in argument 2 (different address spaces) drivers/staging/vt6655/device_main.c:1503:25: expected void [noderef] <asn:2>*<noident> drivers/staging/vt6655/device_main.c:1503:25: got struct vnt_private * drivers/staging/vt6655/device_main.c:1505:25: warning: incorrect type in argument 1 (different address spaces) drivers/staging/vt6655/device_main.c:1505:25: expected void [noderef] <asn:2>*<noident> drivers/staging/vt6655/device_main.c:1505:25: got struct vnt_private * drivers/staging/vt6655/device_main.c:1505:25: warning: incorrect type in argument 2 (different address spaces) drivers/staging/vt6655/device_main.c:1505:25: expected void [noderef] <asn:2>*<noident> drivers/staging/vt6655/device_main.c:1505:25: got struct vnt_private * Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-13Merge tag 'gpio-v3.19-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio fixes from Linus Walleij: "Here are some GPIO fixes, mainly affecting the DLN2 IRQ handling. Nothing special about them, just fixes: - Three patches fixing IRQ handling for the DLN2 - Null pointer handling for grgpio" * tag 'gpio-v3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: dln2: use bus_sync_unlock instead of scheduling work gpio: grgpio: Avoid potential NULL pointer dereference gpio: dln2: Fix gpio output value in dln2_gpio_direction_output() gpio: dln2: fix issue when an IRQ is unmasked then enabled
2015-01-13Merge tag 'mmc-v3.19-3' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds
Pull MMC fixes from Ulf Hansson: "MMC host: - sdhci-pci|acpi: Support some new IDs - sdhci: Fix sleep from atomic context - sdhci-pxav3: Prevent hang during ->probe() - sdhci: Disable re-tuning for HS400" * tag 'mmc-v3.19-3' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sdhci-pci: Add support for Intel SPT mmc: sdhci-acpi: Add ACPI HID INT344D mmc: sdhci: Fix sleep in atomic after inserting SD card mmc: sdhci-pxav3: do the mbus window configuration after enabling clocks mmc: sdhci: Disable re-tuning for HS400 mmc: sdhci: Simplify use of tuning timer mmc: sdhci: Add out_unlock to sdhci_execute_tuning mmc: sdhci: Tuning should not change max_blk_count
2015-01-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull scsi target fixes from Nicholas Bellinger: "Mostly minor fixes this time, including: - Add missing virtio-scsi -> TCM attribute conversion in vhost-scsi. - Fix persistent reservations write exclusive handling to allow readers for all registered I_T nexuses. - Drop arbitrary maximum I/O size limit in order to process I/Os larger than 4 MB, required for initiators that don't honor block limits EVPD. - Drop the now left-over fabric_max_sectors attribute" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Fix typos in enum cmd_flags_table MAINTAINERS: Add entry for iSER target driver target: Allow Write Exclusive non-reservation holders to READ target: Drop left-over fabric_max_sectors attribute target: Drop arbitrary maximum I/O size limit Documentation/target: Update fabric_ops to latest code vhost-scsi: Add missing virtio-scsi -> TCM attribute conversion
2015-01-13mm: mmu_gather: use tlb->end != 0 only for TLB invalidationWill Deacon
When batching up address ranges for TLB invalidation, we check tlb->end != 0 to indicate that some pages have actually been unmapped. As of commit f045bbb9fa1b ("mmu_gather: fix over-eager tlb_flush_mmu_free() calling"), we use the same check for freeing these pages in order to avoid a performance regression where we call free_pages_and_swap_cache even when no pages are actually queued up. Unfortunately, the range could have been reset (tlb->end = 0) by tlb_end_vma, which has been shown to cause memory leaks on arm64. Furthermore, investigation into these leaks revealed that the fullmm case on task exit no longer invalidates the TLB, by virtue of tlb->end == 0 (in 3.18, need_flush would have been set). This patch resolves the problem by reverting commit f045bbb9fa1b, using instead tlb->local.nr as the predicate for page freeing in tlb_flush_mmu_free and ensuring that tlb->end is initialised to a non-zero value in the fullmm case. Tested-by: Mark Langsdorf <mlangsdo@redhat.com> Tested-by: Dave Hansen <dave@sr71.net> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-12Merge tag 'v3.19-rockhip-clkfixes1' of ↵Michael Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes - two currently unused clocks that need to stay enabled - fix the lock bit locations of the rk3066 plls - fix rk3288 core divider values to the ones actually specified by the soc vendor
2015-01-12usb/kaweth: use GFP_ATOMIC under spin_lock in usb_start_wait_urb()Alexey Khoroshilov
Commit e4c7f259c5be ("USB: kaweth.c: use GFP_ATOMIC under spin_lock") makes sure that kaweth_internal_control_msg() allocates memory with GFP_ATOMIC, but kaweth_internal_control_msg() also calls usb_start_wait_urb() that still allocates memory with GFP_NOIO. The patch fixes usb_start_wait_urb() as well. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12MAINTAINERS: add me as ibmveth maintainerThomas Falcon
Adding myself as the ibmveth maintainer and replacing Santiago Leon. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Cc: Santiago Leon <santi_leon@yahoo.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12tipc: fix bug in broadcast retransmit codeJon Paul Maloy
In commit 58dc55f25631178ee74cd27185956a8f7dcb3e32 ("tipc: use generic SKB list APIs to manage link transmission queue") we replace all list traversal loops with the macros skb_queue_walk() or skb_queue_walk_safe(). While the previous loops were based on the assumption that the list was NULL-terminated, the standard macros stop when the iterator reaches the list head, which is non-NULL. In the function bclink_retransmit_pkt() this macro replacement has lead to a bug. When we receive a BCAST STATE_MSG we unconditionally call the function bclink_retransmit_pkt(), whether there really is anything to retransmit or not, assuming that the sequence number comparisons will lead to the correct behavior. However, if the transmission queue is empty, or if there are no eligible buffers in the transmission queue, we will by mistake pass the list head pointer to the function tipc_link_retransmit(). Since the list head is not a valid sk_buff, this leads to a crash. In this commit we fix this by only calling tipc_link_retransmit() if we actually found eligible buffers in the transmission queue. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12thermal: rcar: Spelling/grammar: s/drier use .../driver uses ...s/Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-12update ip-sysctl.txt documentation (v2)Ani Sinha
Update documentation to reflect the fact that /proc/sys/net/ipv4/route/max_size is no longer used for ipv4. Signed-off-by: Ani Sinha <ani@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12net/at91_ether: prepare and unprepare clockAlexandre Belloni
The clock is enabled without being prepared, this leads to: WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:889 __clk_enable+0x24/0xa8() and a non working ethernet interface. Use clk_prepare_enable() and clk_disable_unprepare() to handle the clock. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12isdn: fix NUL (\0 or \x00) specification in stringGiel van Schijndel
In C one can either use '\0' or '\x00' (or '\000') to add a NUL byte to a string. '\0x00' isn't part of these and will in fact result in a single NUL followed by "x00". This fixes that. Signed-off-by: Giel van Schijndel <me@mortis.eu> Reported-at: http://www.viva64.com/en/b/0299/ Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12Merge tag 'fixes-for-v3.19-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v3.19-rc5 Just three fixes this time. An oops fix in ep_write() from gadgetfs, another oops for the Atmel UDC when unloading a gadget driver and the fix for PHY deferred probing. Signed-off-by: Felipe Balbi <balbi@ti.com> Conflicts: drivers/usb/phy/phy.c